pcmcia: pcmcia_config_loop() default CIS entry handling
Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 04ece0b..c99dc5d 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -286,6 +286,7 @@
static int axnet_configcheck(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
int i;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index a606087..10fc537 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -514,6 +514,7 @@
static int pcnet_confcheck(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
int *has_shmem = priv_data;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 1e59503..05bca83 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -461,6 +461,7 @@
static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
int k;
@@ -651,6 +652,7 @@
static int smc_configcheck(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
p_dev->io.BasePort1 = cf->io.win[0].base;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index b0de704..a16efa4 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -718,6 +718,7 @@
static int
xirc2ps_config_modem(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
unsigned int ioaddr;
@@ -736,6 +737,7 @@
static int
xirc2ps_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
int *pass = priv_data;
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d721673..657adf8 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -206,19 +206,12 @@
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-struct airo_cs_config_data {
- cistpl_cftable_entry_t dflt;
- win_req_t req;
-};
-
static int airo_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
- struct airo_cs_config_data *cfg_mem = priv_data;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- cfg_mem->dflt = *cfg;
+ win_req_t *req = priv_data;
if (cfg->index == 0)
return -ENODEV;
@@ -233,17 +226,17 @@
/* Note that the CIS values need to be rescaled */
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
@@ -273,14 +266,14 @@
needs to be mapped to virtual space with ioremap() before it
is used.
*/
- if ((cfg->mem.nwin > 0) || (cfg_mem->dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &cfg_mem->dflt.mem;
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
memreq_t map;
- cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- cfg_mem->req.Base = mem->win[0].host_addr;
- cfg_mem->req.Size = mem->win[0].len;
- cfg_mem->req.AccessSpeed = 0;
- if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
+ req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req->Base = mem->win[0].host_addr;
+ req->Size = mem->win[0].len;
+ req->AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
return -ENODEV;
map.Page = 0;
map.CardOffset = mem->win[0].card_addr;
@@ -295,15 +288,15 @@
static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
- struct airo_cs_config_data *cfg_mem;
+ win_req_t *req;
int last_fn, last_ret;
dev = link->priv;
DEBUG(0, "airo_config(0x%p)\n", link);
- cfg_mem = kzalloc(sizeof(struct airo_cs_config_data), GFP_KERNEL);
- if (!cfg_mem)
+ req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+ if (!req)
return -ENOMEM;
/*
@@ -320,7 +313,7 @@
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, airo_cs_config_check, cfg_mem);
+ last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
if (last_ret)
goto failed;
@@ -365,17 +358,17 @@
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
- cfg_mem->req.Base+cfg_mem->req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", req->Base,
+ req->Base+req->Size-1);
printk("\n");
- kfree(cfg_mem);
+ kfree(req);
return 0;
cs_failed:
cs_error(link, last_fn, last_ret);
failed:
airo_release(link);
- kfree(cfg_mem);
+ kfree(req);
return -ENODEV;
} /* airo_config */
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 12efd44..c71aae9 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -226,14 +226,12 @@
static int atmel_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
- cistpl_cftable_entry_t *dflt = priv_data;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- *dflt = *cfg;
if (cfg->index == 0)
return -ENODEV;
+
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -278,7 +276,6 @@
local_info_t *dev;
int last_fn, last_ret;
struct pcmcia_device_id *did;
- cistpl_cftable_entry_t dflt = { 0 };
dev = link->priv;
did = handle_to_dev(link).driver_data;
@@ -297,7 +294,7 @@
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
- if (pcmcia_loop_config(link, atmel_config_check, &dflt))
+ if (pcmcia_loop_config(link, atmel_config_check, NULL))
goto failed;
/*
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 2abaa90..f9595ca 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -537,23 +537,21 @@
* socket and make the device available to the system */
struct prism2_config_data {
- cistpl_cftable_entry_t dflt;
config_info_t conf;
};
static int prism2_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
struct prism2_config_data *cfg_mem = priv_data;
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- cfg_mem->dflt = *cfg;
if (cfg->index == 0)
return -ENODEV;
PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
- "(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
+ "(default 0x%02X)\n", cfg->index, dflt->index);
/* Does this card need audio output? */
if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
@@ -570,8 +568,8 @@
" this entry\n");
return -ENODEV;
}
- } else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] /
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
10000 && !ignore_cis_vcc) {
PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
"- skipping this entry\n");
@@ -581,11 +579,11 @@
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
/* At least Compaq WL200 does not have IRQInfo1 set,
@@ -597,11 +595,11 @@
/* IO window settings */
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
- "cfg_mem->dflt.io.nwin=%d\n",
- cfg->io.nwin, cfg_mem->dflt.io.nwin);
+ "dflt->io.nwin=%d\n",
+ cfg->io.nwin, dflt->io.nwin);
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
"io.base=0x%04x, len=%d\n", io->flags,
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 67a172d..8a367f9 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -165,18 +165,16 @@
} while (0)
struct orinoco_cs_config_data {
- cistpl_cftable_entry_t dflt;
config_info_t conf;
};
static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
struct orinoco_cs_config_data *cfg_mem = priv_data;
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- cfg_mem->dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
@@ -188,9 +186,9 @@
if (!ignore_cis_vcc)
goto next_entry;
}
- } else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n", cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n", cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
if (!ignore_cis_vcc)
goto next_entry;
}
@@ -199,17 +197,17 @@
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp =
- cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 7536aa9..e28878d 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -634,18 +634,16 @@
*/
struct spectrum_cs_config_data {
- cistpl_cftable_entry_t dflt;
config_info_t conf;
};
static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
void *priv_data)
{
struct spectrum_cs_config_data *cfg_mem = priv_data;
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- cfg_mem->dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
@@ -657,9 +655,9 @@
if (!ignore_cis_vcc)
goto next_entry;
}
- } else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n", cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n", cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
if (!ignore_cis_vcc)
goto next_entry;
}
@@ -668,17 +666,17 @@
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp =
- cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
