[TG3]: Separate requested and actual flow control parameters
This patch removes the TX and RX flow control flags from tg3_flags and
adds two new flow control variables, flowctrl and active_flowctrl.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 1f0fd76..ad0289a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1602,17 +1602,19 @@
(tp->link_config.active_duplex == DUPLEX_FULL ?
"full" : "half"));
- printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
- "%s for RX.\n",
+ printk(KERN_INFO PFX
+ "%s: Flow control is %s for TX and %s for RX.\n",
tp->dev->name,
- (tp->tg3_flags & TG3_FLAG_TX_PAUSE) ? "on" : "off",
- (tp->tg3_flags & TG3_FLAG_RX_PAUSE) ? "on" : "off");
+ (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) ?
+ "on" : "off",
+ (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) ?
+ "on" : "off");
}
}
static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv)
{
- u32 new_tg3_flags = 0;
+ u8 new_tg3_flags = 0;
u32 old_rx_mode = tp->rx_mode;
u32 old_tx_mode = tp->tx_mode;
@@ -1639,31 +1641,27 @@
if (local_adv & ADVERTISE_PAUSE_CAP) {
if (local_adv & ADVERTISE_PAUSE_ASYM) {
if (remote_adv & LPA_PAUSE_CAP)
- new_tg3_flags |=
- (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE);
+ new_tg3_flags = TG3_FLOW_CTRL_RX |
+ TG3_FLOW_CTRL_TX;
else if (remote_adv & LPA_PAUSE_ASYM)
- new_tg3_flags |=
- (TG3_FLAG_RX_PAUSE);
+ new_tg3_flags = TG3_FLOW_CTRL_RX;
} else {
if (remote_adv & LPA_PAUSE_CAP)
- new_tg3_flags |=
- (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE);
+ new_tg3_flags = TG3_FLOW_CTRL_RX |
+ TG3_FLOW_CTRL_TX;
}
} else if (local_adv & ADVERTISE_PAUSE_ASYM) {
if ((remote_adv & LPA_PAUSE_CAP) &&
- (remote_adv & LPA_PAUSE_ASYM))
- new_tg3_flags |= TG3_FLAG_TX_PAUSE;
+ (remote_adv & LPA_PAUSE_ASYM))
+ new_tg3_flags = TG3_FLOW_CTRL_TX;
}
-
- tp->tg3_flags &= ~(TG3_FLAG_RX_PAUSE | TG3_FLAG_TX_PAUSE);
- tp->tg3_flags |= new_tg3_flags;
} else {
- new_tg3_flags = tp->tg3_flags;
+ new_tg3_flags = tp->link_config.flowctrl;
}
- if (new_tg3_flags & TG3_FLAG_RX_PAUSE)
+ tp->link_config.active_flowctrl = new_tg3_flags;
+
+ if (new_tg3_flags & TG3_FLOW_CTRL_RX)
tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
else
tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
@@ -1672,7 +1670,7 @@
tw32_f(MAC_RX_MODE, tp->rx_mode);
}
- if (new_tg3_flags & TG3_FLAG_TX_PAUSE)
+ if (new_tg3_flags & TG3_FLOW_CTRL_TX)
tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
else
tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
@@ -2812,9 +2810,7 @@
int current_link_up;
int i;
- orig_pause_cfg =
- (tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE));
+ orig_pause_cfg = tp->link_config.active_flowctrl;
orig_active_speed = tp->link_config.active_speed;
orig_active_duplex = tp->link_config.active_duplex;
@@ -2903,9 +2899,7 @@
netif_carrier_off(tp->dev);
tg3_link_report(tp);
} else {
- u32 now_pause_cfg =
- tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
- TG3_FLAG_TX_PAUSE);
+ u32 now_pause_cfg = tp->link_config.active_flowctrl;
if (orig_pause_cfg != now_pause_cfg ||
orig_active_speed != tp->link_config.active_speed ||
orig_active_duplex != tp->link_config.active_duplex)
@@ -8569,8 +8563,16 @@
struct tg3 *tp = netdev_priv(dev);
epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;
- epause->rx_pause = (tp->tg3_flags & TG3_FLAG_RX_PAUSE) != 0;
- epause->tx_pause = (tp->tg3_flags & TG3_FLAG_TX_PAUSE) != 0;
+
+ if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX)
+ epause->rx_pause = 1;
+ else
+ epause->rx_pause = 0;
+
+ if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX)
+ epause->tx_pause = 1;
+ else
+ epause->tx_pause = 0;
}
static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
@@ -8590,13 +8592,13 @@
else
tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;
if (epause->rx_pause)
- tp->tg3_flags |= TG3_FLAG_RX_PAUSE;
+ tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;
else
- tp->tg3_flags &= ~TG3_FLAG_RX_PAUSE;
+ tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;
if (epause->tx_pause)
- tp->tg3_flags |= TG3_FLAG_TX_PAUSE;
+ tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;
else
- tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE;
+ tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;
if (netif_running(dev)) {
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
@@ -12631,6 +12633,7 @@
/* flow control autonegotiation is default behavior */
tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+ tp->link_config.flowctrl = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;
tg3_init_coal(tp);