sata_sil: fix spurious IRQ handling
Interestingly, sata_sil raises spurious interrupts if it's coupled
with Sil SATA_PATA bridge. Currently, sata_sil interrupt handler is
strict about spurious interrupts and freezes the port when it occurs.
This patch makes it more forgiving.
* On SATA PHY event interrupt, serror value is checked to see whether
it really is PHYRDY CHG event. If not, SATA PHY event interrupt is
ignored.
* If ATA interrupt occurs while no command is in progress, it's
cleared and ignored.
This fixes bugzilla bug 9505.
http://bugzilla.kernel.org/show_bug.cgi?id=9505
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 4e6e381..025622b 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -390,23 +390,28 @@
sil_scr_read(ap, SCR_ERROR, &serror);
sil_scr_write(ap, SCR_ERROR, serror);
- /* Trigger hotplug and accumulate SError only if the
- * port isn't already frozen. Otherwise, PHY events
- * during hardreset makes controllers with broken SIEN
- * repeat probing needlessly.
+ /* Sometimes spurious interrupts occur, double check
+ * it's PHYRDY CHG.
*/
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- ata_ehi_hotplugged(&ap->link.eh_info);
- ap->link.eh_info.serror |= serror;
+ if (serror & SERR_PHYRDY_CHG) {
+ /* Trigger hotplug and accumulate SError only
+ * if the port isn't already frozen.
+ * Otherwise, PHY events during hardreset
+ * makes controllers with broken SIEN repeat
+ * probing needlessly.
+ */
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+ ata_ehi_hotplugged(&ap->link.eh_info);
+ ap->link.eh_info.serror |= serror;
+ }
+ goto freeze;
}
- goto freeze;
+ if (!(bmdma2 & SIL_DMA_COMPLETE))
+ return;
}
- if (unlikely(!qc))
- goto freeze;
-
- if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
/* this sometimes happens, just clear IRQ */
ata_chk_status(ap);
return;