qlcnic: release device resources during interface down
Previously we were allocating device resources during probe and
release them during remove.
Now alloc during interface up and release in interface down.
This helps in device performance, as it doesn't need to keep
track of inactive resources.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 9658b18..38d8fe0 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -346,7 +346,7 @@
if (!is_valid_ether_addr(addr->sa_data))
return -EINVAL;
- if (netif_running(netdev)) {
+ if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
netif_device_detach(netdev);
qlcnic_napi_disable(adapter);
}
@@ -355,7 +355,7 @@
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
qlcnic_set_multi(adapter->netdev);
- if (netif_running(netdev)) {
+ if (test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
netif_device_attach(netdev);
qlcnic_napi_enable(adapter);
}
@@ -877,9 +877,23 @@
static int
__qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev)
{
+ int ring;
+ struct qlcnic_host_rds_ring *rds_ring;
+
if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
return -EIO;
+ if (test_bit(__QLCNIC_DEV_UP, &adapter->state))
+ return 0;
+
+ if (qlcnic_fw_create_ctx(adapter))
+ return -EIO;
+
+ for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+ rds_ring = &adapter->recv_ctx.rds_rings[ring];
+ qlcnic_post_rx_buffers(adapter, ring, rds_ring);
+ }
+
qlcnic_set_multi(netdev);
qlcnic_fw_cmd_set_mtu(adapter, netdev->mtu);
@@ -936,6 +950,9 @@
qlcnic_napi_disable(adapter);
+ qlcnic_fw_destroy_ctx(adapter);
+
+ qlcnic_reset_rx_buffers_list(adapter);
qlcnic_release_tx_buffers(adapter);
spin_unlock(&adapter->tx_clean_lock);
}
@@ -957,13 +974,11 @@
{
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- int err, ring;
- struct qlcnic_host_rds_ring *rds_ring;
+ int err;
if (adapter->is_up == QLCNIC_ADAPTER_UP_MAGIC)
return 0;
-
err = qlcnic_napi_add(adapter, netdev);
if (err)
return err;
@@ -971,7 +986,7 @@
err = qlcnic_alloc_sw_resources(adapter);
if (err) {
dev_err(&pdev->dev, "Error in setting sw resources\n");
- return err;
+ goto err_out_napi_del;
}
err = qlcnic_alloc_hw_resources(adapter);
@@ -980,16 +995,10 @@
goto err_out_free_sw;
}
-
- for (ring = 0; ring < adapter->max_rds_rings; ring++) {
- rds_ring = &adapter->recv_ctx.rds_rings[ring];
- qlcnic_post_rx_buffers(adapter, ring, rds_ring);
- }
-
err = qlcnic_request_irq(adapter);
if (err) {
dev_err(&pdev->dev, "failed to setup interrupt\n");
- goto err_out_free_rxbuf;
+ goto err_out_free_hw;
}
qlcnic_init_coalesce_defaults(adapter);
@@ -999,11 +1008,12 @@
adapter->is_up = QLCNIC_ADAPTER_UP_MAGIC;
return 0;
-err_out_free_rxbuf:
- qlcnic_release_rx_buffers(adapter);
+err_out_free_hw:
qlcnic_free_hw_resources(adapter);
err_out_free_sw:
qlcnic_free_sw_resources(adapter);
+err_out_napi_del:
+ qlcnic_napi_del(adapter);
return err;
}
@@ -1038,6 +1048,8 @@
}
}
+ qlcnic_fw_destroy_ctx(adapter);
+
qlcnic_detach(adapter);
adapter->diag_test = 0;
@@ -1056,6 +1068,7 @@
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct qlcnic_host_sds_ring *sds_ring;
+ struct qlcnic_host_rds_ring *rds_ring;
int ring;
int ret;
@@ -1075,6 +1088,17 @@
return ret;
}
+ ret = qlcnic_fw_create_ctx(adapter);
+ if (ret) {
+ qlcnic_detach(adapter);
+ return ret;
+ }
+
+ for (ring = 0; ring < adapter->max_rds_rings; ring++) {
+ rds_ring = &adapter->recv_ctx.rds_rings[ring];
+ qlcnic_post_rx_buffers(adapter, ring, rds_ring);
+ }
+
if (adapter->diag_test == QLCNIC_INTERRUPT_TEST) {
for (ring = 0; ring < adapter->max_sds_rings; ring++) {
sds_ring = &adapter->recv_ctx.sds_rings[ring];
@@ -2636,7 +2660,7 @@
if (!(adapter->capabilities & QLCNIC_FW_CAPABILITY_BDG))
goto err_out;
- if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+ if (!test_bit(__QLCNIC_DEV_UP, &adapter->state))
goto err_out;
if (strict_strtoul(buf, 2, &new))
@@ -2944,7 +2968,7 @@
if (!adapter)
goto done;
- if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+ if (!test_bit(__QLCNIC_DEV_UP, &adapter->state))
goto done;
qlcnic_config_indev_addr(dev, event);
@@ -2980,7 +3004,7 @@
if (!adapter)
goto done;
- if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+ if (!test_bit(__QLCNIC_DEV_UP, &adapter->state))
goto done;
switch (event) {
