USB: musb: silence "suspend as a_wait_vrise is_active" msgs
Get rid of some obnoxious and inappropriate messaging, mostly on
DaVinci, when usbcore tries to autosuspend a root hub if just a
mini/micro-A connector is connected. Symptom: endless stream of
messages reading like:
musb_bus_suspend 2221: trying to suspend as a_wait_vrise is_active=1
Improve that musb bus suspend primitive a bit. Take advantage of
this call to update the OTG state machine if appropriate, moving
the device out of the A_WAIT_VRISE state. There's basically no
timer for that state transition just now, except with tusb6010;
that can make trouble.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 992b516..e16ff60 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -330,7 +330,6 @@
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
- musb->is_active = 1;
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -344,7 +343,9 @@
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
- /* NOTE: this must complete poweron within 100 msec */
+ /* NOTE: this must complete poweron within 100 msec
+ * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+ */
davinci_source_power(musb, drvvbus, 0);
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 94a2a35..d6ed560 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2235,13 +2235,30 @@
static int musb_bus_suspend(struct usb_hcd *hcd)
{
struct musb *musb = hcd_to_musb(hcd);
+ u8 devctl;
- if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+ if (!is_host_active(musb))
return 0;
- if (is_host_active(musb) && musb->is_active) {
- WARNING("trying to suspend as %s is_active=%i\n",
- otg_state_string(musb), musb->is_active);
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_SUSPEND:
+ return 0;
+ case OTG_STATE_A_WAIT_VRISE:
+ /* ID could be grounded even if there's no device
+ * on the other end of the cable. NOTE that the
+ * A_WAIT_VRISE timers are messy with MUSB...
+ */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ break;
+ default:
+ break;
+ }
+
+ if (musb->is_active) {
+ WARNING("trying to suspend as %s while active\n",
+ otg_state_string(musb));
return -EBUSY;
} else
return 0;
