/*
 * MPC8377E MDS Device Tree Source
 *
 * Copyright 2007 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;

/ {
	model = "fsl,mpc8377emds";
	compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8377@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <0x20>;
			i-cache-line-size = <0x20>;
			d-cache-size = <0x8000>;		// L1, 32K
			i-cache-size = <0x8000>;		// L1, 32K
			timebase-frequency = <0>;
			bus-frequency = <0>;
			clock-frequency = <0>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x20000000>;	// 512MB at 0
	};

	soc@e0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		ranges = <0x0 0xe0000000 0x00100000>;
		reg = <0xe0000000 0x00000200>;
		bus-frequency = <0>;

		wdt@200 {
			compatible = "mpc83xx_wdt";
			reg = <0x200 0x100>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <0xe 0x8>;
			interrupt-parent = < &ipic >;
			dfsrr;
		};

		i2c@3100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x3100 0x100>;
			interrupts = <0xf 0x8>;
			interrupt-parent = < &ipic >;
			dfsrr;
		};

		spi@7000 {
			compatible = "fsl_spi";
			reg = <0x7000 0x1000>;
			interrupts = <0x10 0x8>;
			interrupt-parent = < &ipic >;
			mode = "cpu";
		};

		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
		usb@23000 {
			compatible = "fsl-usb2-dr";
			reg = <0x23000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupt-parent = < &ipic >;
			interrupts = <0x26 0x8>;
			phy_type = "utmi_wide";
		};

		mdio@24520 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,gianfar-mdio";
			reg = <0x24520 0x20>;
			phy2: ethernet-phy@2 {
				interrupt-parent = < &ipic >;
				interrupts = <0x11 0x8>;
				reg = <2>;
				device_type = "ethernet-phy";
			};
			phy3: ethernet-phy@3 {
				interrupt-parent = < &ipic >;
				interrupts = <0x12 0x8>;
				reg = <3>;
				device_type = "ethernet-phy";
			};
		};

		enet0: ethernet@24000 {
			cell-index = <0>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
			phy-connection-type = "mii";
			interrupt-parent = < &ipic >;
			phy-handle = < &phy2 >;
		};

		enet1: ethernet@25000 {
			cell-index = <1>;
			device_type = "network";
			model = "eTSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
			phy-connection-type = "mii";
			interrupt-parent = < &ipic >;
			phy-handle = < &phy3 >;
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>;
			clock-frequency = <0>;
			interrupts = <0x9 0x8>;
			interrupt-parent = < &ipic >;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4600 0x100>;
			clock-frequency = <0>;
			interrupts = <0xa 0x8>;
			interrupt-parent = < &ipic >;
		};

		crypto@30000 {
			model = "SEC3";
			compatible = "talitos";
			reg = <0x30000 0x10000>;
			interrupts = <0xb 0x8>;
			interrupt-parent = < &ipic >;
			/* Rev. 3.0 geometry */
			num-channels = <4>;
			channel-fifo-len = <0x18>;
			exec-units-mask = <0x000001fe>;
			descriptor-types-mask = <0x03ab0ebf>;
		};

		sdhc@2e000 {
			model = "eSDHC";
			compatible = "fsl,esdhc";
			reg = <0x2e000 0x1000>;
			interrupts = <0x2a 0x8>;
			interrupt-parent = < &ipic >;
		};

		sata@18000 {
			compatible = "fsl,mpc8379-sata";
			reg = <0x18000 0x1000>;
			interrupts = <0x2c 0x8>;
			interrupt-parent = < &ipic >;
		};

		sata@19000 {
			compatible = "fsl,mpc8379-sata";
			reg = <0x19000 0x1000>;
			interrupts = <0x2d 0x8>;
			interrupt-parent = < &ipic >;
		};

		/* IPIC
		 * interrupts cell = <intr #, sense>
		 * sense values match linux IORESOURCE_IRQ_* defines:
		 * sense == 8: Level, low assertion
		 * sense == 2: Edge, high-to-low change
		 */
		ipic: pic@700 {
			compatible = "fsl,ipic";
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x700 0x100>;
		};
	};

	pci0: pci@e0008500 {
		cell-index = <0>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <

				/* IDSEL 0x11 */
				 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8
				 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8
				 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8
				 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8

				/* IDSEL 0x12 */
				 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8
				 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8
				 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8
				 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8

				/* IDSEL 0x13 */
				 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8
				 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8
				 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8
				 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8

				/* IDSEL 0x15 */
				 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8
				 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8
				 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8
				 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8

				/* IDSEL 0x16 */
				 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8
				 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8
				 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8
				 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8

				/* IDSEL 0x17 */
				 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8
				 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8
				 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8
				 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8

				/* IDSEL 0x18 */
				 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8
				 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8
				 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8
				 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>;
		interrupt-parent = < &ipic >;
		interrupts = <0x42 0x8>;
		bus-range = <0 0>;
		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
		clock-frequency = <0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xe0008500 0x100>;
		compatible = "fsl,mpc8349-pci";
		device_type = "pci";
	};
};