/dts-v1/;

/include/ "skeleton.dtsi"

#include <dt-bindings/clock/qcom,gcc-msm8960.h>

/ {
	model = "Qualcomm MSM8960";
	compatible = "qcom,msm8960";
	interrupt-parent = <&intc>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		interrupts = <1 14 0x304>;
		compatible = "qcom,krait";
		enable-method = "qcom,kpss-acc-v1";

		cpu@0 {
			device_type = "cpu";
			reg = <0>;
			next-level-cache = <&L2>;
			qcom,acc = <&acc0>;
			qcom,saw = <&saw0>;
		};

		cpu@1 {
			device_type = "cpu";
			reg = <1>;
			next-level-cache = <&L2>;
			qcom,acc = <&acc1>;
			qcom,saw = <&saw1>;
		};

		L2: l2-cache {
			compatible = "cache";
			cache-level = <2>;
			interrupts = <0 2 0x4>;
		};
	};

	cpu-pmu {
		compatible = "qcom,krait-pmu";
		interrupts = <1 10 0x304>;
		qcom,no-pc-write;
	};

	intc: interrupt-controller@2000000 {
		compatible = "qcom,msm-qgic2";
		interrupt-controller;
		#interrupt-cells = <3>;
		reg = < 0x02000000 0x1000 >,
		      < 0x02002000 0x1000 >;
	};

	timer@200a000 {
		compatible = "qcom,kpss-timer", "qcom,msm-timer";
		interrupts = <1 1 0x301>,
			     <1 2 0x301>,
			     <1 3 0x301>;
		reg = <0x0200a000 0x100>;
		clock-frequency = <27000000>,
				  <32768>;
		cpu-offset = <0x80000>;
	};

	msmgpio: gpio@800000 {
		compatible = "qcom,msm-gpio";
		gpio-controller;
		#gpio-cells = <2>;
		ngpio = <150>;
		interrupts = <0 16 0x4>;
		interrupt-controller;
		#interrupt-cells = <2>;
		reg = <0x800000 0x4000>;
	};

	gcc: clock-controller@900000 {
		compatible = "qcom,gcc-msm8960";
		#clock-cells = <1>;
		#reset-cells = <1>;
		reg = <0x900000 0x4000>;
	};

	clock-controller@4000000 {
		compatible = "qcom,mmcc-msm8960";
		reg = <0x4000000 0x1000>;
		#clock-cells = <1>;
		#reset-cells = <1>;
	};

	acc0: clock-controller@2088000 {
		compatible = "qcom,kpss-acc-v1";
		reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
	};

	acc1: clock-controller@2098000 {
		compatible = "qcom,kpss-acc-v1";
		reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
	};

	saw0: regulator@2089000 {
		compatible = "qcom,saw2";
		reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
		regulator;
	};

	saw1: regulator@2099000 {
		compatible = "qcom,saw2";
		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
		regulator;
	};

	serial@16440000 {
		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
		reg = <0x16440000 0x1000>,
		      <0x16400000 0x1000>;
		interrupts = <0 154 0x0>;
		clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
		clock-names = "core", "iface";
	};

	qcom,ssbi@500000 {
		compatible = "qcom,ssbi";
		reg = <0x500000 0x1000>;
		qcom,controller-type = "pmic-arbiter";
	};

	rng@1a500000 {
		compatible = "qcom,prng";
		reg = <0x1a500000 0x200>;
		clocks = <&gcc PRNG_CLK>;
		clock-names = "core";
	};
};