| /* |
| * poodle.c -- SoC audio for Poodle |
| * |
| * Copyright 2005 Wolfson Microelectronics PLC. |
| * Copyright 2005 Openedhand Ltd. |
| * |
| * Authors: Liam Girdwood <lrg@slimlogic.co.uk> |
| * Richard Purdie <richard@openedhand.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/timer.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/soc.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/hardware/locomo.h> |
| #include <mach/poodle.h> |
| #include <mach/audio.h> |
| |
| #include "../codecs/wm8731.h" |
| #include "pxa2xx-i2s.h" |
| |
| #define POODLE_HP 1 |
| #define POODLE_HP_OFF 0 |
| #define POODLE_SPK_ON 1 |
| #define POODLE_SPK_OFF 0 |
| |
| /* audio clock in Hz - rounded from 12.235MHz */ |
| #define POODLE_AUDIO_CLOCK 12288000 |
| |
| static int poodle_jack_func; |
| static int poodle_spk_func; |
| |
| static void poodle_ext_control(struct snd_soc_dapm_context *dapm) |
| { |
| /* set up jack connection */ |
| if (poodle_jack_func == POODLE_HP) { |
| /* set = unmute headphone */ |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_L, 1); |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_R, 1); |
| snd_soc_dapm_enable_pin(dapm, "Headphone Jack"); |
| } else { |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_L, 0); |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_R, 0); |
| snd_soc_dapm_disable_pin(dapm, "Headphone Jack"); |
| } |
| |
| /* set the enpoints to their new connetion states */ |
| if (poodle_spk_func == POODLE_SPK_ON) |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk"); |
| else |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk"); |
| |
| /* signal a DAPM event */ |
| snd_soc_dapm_sync(dapm); |
| } |
| |
| static int poodle_startup(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| |
| /* check the jack status at stream startup */ |
| poodle_ext_control(&rtd->card->dapm); |
| |
| return 0; |
| } |
| |
| /* we need to unmute the HP at shutdown as the mute burns power on poodle */ |
| static void poodle_shutdown(struct snd_pcm_substream *substream) |
| { |
| /* set = unmute headphone */ |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_L, 1); |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_R, 1); |
| } |
| |
| static int poodle_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| struct snd_soc_dai *cpu_dai = rtd->cpu_dai; |
| unsigned int clk = 0; |
| int ret = 0; |
| |
| switch (params_rate(params)) { |
| case 8000: |
| case 16000: |
| case 48000: |
| case 96000: |
| clk = 12288000; |
| break; |
| case 11025: |
| case 22050: |
| case 44100: |
| clk = 11289600; |
| break; |
| } |
| |
| /* set the codec system clock for DAC and ADC */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, clk, |
| SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| /* set the I2S system clock as input (unused) */ |
| ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0, |
| SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static struct snd_soc_ops poodle_ops = { |
| .startup = poodle_startup, |
| .hw_params = poodle_hw_params, |
| .shutdown = poodle_shutdown, |
| }; |
| |
| static int poodle_get_jack(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.integer.value[0] = poodle_jack_func; |
| return 0; |
| } |
| |
| static int poodle_set_jack(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); |
| |
| if (poodle_jack_func == ucontrol->value.integer.value[0]) |
| return 0; |
| |
| poodle_jack_func = ucontrol->value.integer.value[0]; |
| poodle_ext_control(&card->dapm); |
| return 1; |
| } |
| |
| static int poodle_get_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| ucontrol->value.integer.value[0] = poodle_spk_func; |
| return 0; |
| } |
| |
| static int poodle_set_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); |
| |
| if (poodle_spk_func == ucontrol->value.integer.value[0]) |
| return 0; |
| |
| poodle_spk_func = ucontrol->value.integer.value[0]; |
| poodle_ext_control(&card->dapm); |
| return 1; |
| } |
| |
| static int poodle_amp_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| if (SND_SOC_DAPM_EVENT_ON(event)) |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_AMP_ON, 0); |
| else |
| locomo_gpio_write(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_AMP_ON, 1); |
| |
| return 0; |
| } |
| |
| /* poodle machine dapm widgets */ |
| static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = { |
| SND_SOC_DAPM_HP("Headphone Jack", NULL), |
| SND_SOC_DAPM_SPK("Ext Spk", poodle_amp_event), |
| }; |
| |
| /* Corgi machine connections to the codec pins */ |
| static const struct snd_soc_dapm_route poodle_audio_map[] = { |
| |
| /* headphone connected to LHPOUT1, RHPOUT1 */ |
| {"Headphone Jack", NULL, "LHPOUT"}, |
| {"Headphone Jack", NULL, "RHPOUT"}, |
| |
| /* speaker connected to LOUT, ROUT */ |
| {"Ext Spk", NULL, "ROUT"}, |
| {"Ext Spk", NULL, "LOUT"}, |
| }; |
| |
| static const char *jack_function[] = {"Off", "Headphone"}; |
| static const char *spk_function[] = {"Off", "On"}; |
| static const struct soc_enum poodle_enum[] = { |
| SOC_ENUM_SINGLE_EXT(2, jack_function), |
| SOC_ENUM_SINGLE_EXT(2, spk_function), |
| }; |
| |
| static const struct snd_kcontrol_new wm8731_poodle_controls[] = { |
| SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack, |
| poodle_set_jack), |
| SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk, |
| poodle_set_spk), |
| }; |
| |
| /* |
| * Logic for a wm8731 as connected on a Sharp SL-C7x0 Device |
| */ |
| static int poodle_wm8731_init(struct snd_soc_pcm_runtime *rtd) |
| { |
| struct snd_soc_codec *codec = rtd->codec; |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| |
| snd_soc_dapm_nc_pin(dapm, "LLINEIN"); |
| snd_soc_dapm_nc_pin(dapm, "RLINEIN"); |
| snd_soc_dapm_enable_pin(dapm, "MICIN"); |
| |
| return 0; |
| } |
| |
| /* poodle digital audio interface glue - connects codec <--> CPU */ |
| static struct snd_soc_dai_link poodle_dai = { |
| .name = "WM8731", |
| .stream_name = "WM8731", |
| .cpu_dai_name = "pxa2xx-i2s", |
| .codec_dai_name = "wm8731-hifi", |
| .platform_name = "pxa-pcm-audio", |
| .codec_name = "wm8731.0-001b", |
| .init = poodle_wm8731_init, |
| .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | |
| SND_SOC_DAIFMT_CBS_CFS, |
| .ops = &poodle_ops, |
| }; |
| |
| /* poodle audio machine driver */ |
| static struct snd_soc_card poodle = { |
| .name = "Poodle", |
| .dai_link = &poodle_dai, |
| .num_links = 1, |
| .owner = THIS_MODULE, |
| |
| .controls = wm8731_poodle_controls, |
| .num_controls = ARRAY_SIZE(wm8731_poodle_controls), |
| .dapm_widgets = wm8731_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm8731_dapm_widgets), |
| .dapm_routes = poodle_audio_map, |
| .num_dapm_routes = ARRAY_SIZE(poodle_audio_map), |
| }; |
| |
| static int poodle_probe(struct platform_device *pdev) |
| { |
| struct snd_soc_card *card = &poodle; |
| int ret; |
| |
| locomo_gpio_set_dir(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_AMP_ON, 0); |
| /* should we mute HP at startup - burning power ?*/ |
| locomo_gpio_set_dir(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_L, 0); |
| locomo_gpio_set_dir(&poodle_locomo_device.dev, |
| POODLE_LOCOMO_GPIO_MUTE_R, 0); |
| |
| card->dev = &pdev->dev; |
| |
| ret = snd_soc_register_card(card); |
| if (ret) |
| dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", |
| ret); |
| return ret; |
| } |
| |
| static int poodle_remove(struct platform_device *pdev) |
| { |
| struct snd_soc_card *card = platform_get_drvdata(pdev); |
| |
| snd_soc_unregister_card(card); |
| return 0; |
| } |
| |
| static struct platform_driver poodle_driver = { |
| .driver = { |
| .name = "poodle-audio", |
| .owner = THIS_MODULE, |
| .pm = &snd_soc_pm_ops, |
| }, |
| .probe = poodle_probe, |
| .remove = poodle_remove, |
| }; |
| |
| module_platform_driver(poodle_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Richard Purdie"); |
| MODULE_DESCRIPTION("ALSA SoC Poodle"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:poodle-audio"); |