diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
new file mode 100644
index 0000000..074f4be
--- /dev/null
+++ b/Documentation/arm/tcm.txt
@@ -0,0 +1,145 @@
+ARM TCM (Tightly-Coupled Memory) handling in Linux
+----
+Written by Linus Walleij <linus.walleij@stericsson.com>
+
+Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory).
+This is usually just a few (4-64) KiB of RAM inside the ARM
+processor.
+
+Due to being embedded inside the CPU The TCM has a
+Harvard-architecture, so there is an ITCM (instruction TCM)
+and a DTCM (data TCM). The DTCM can not contain any
+instructions, but the ITCM can actually contain data.
+The size of DTCM or ITCM is minimum 4KiB so the typical
+minimum configuration is 4KiB ITCM and 4KiB DTCM.
+
+ARM CPU:s have special registers to read out status, physical
+location and size of TCM memories. arch/arm/include/asm/cputype.h
+defines a CPUID_TCM register that you can read out from the
+system control coprocessor. Documentation from ARM can be found
+at http://infocenter.arm.com, search for "TCM Status Register"
+to see documents for all CPUs. Reading this register you can
+determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
+machine.
+
+There is further a TCM region register (search for "TCM Region
+Registers" at the ARM site) that can report and modify the location
+size of TCM memories at runtime. This is used to read out and modify
+TCM location and size. Notice that this is not a MMU table: you
+actually move the physical location of the TCM around. At the
+place you put it, it will mask any underlying RAM from the
+CPU so it is usually wise not to overlap any physical RAM with
+the TCM. The TCM memory exists totally outside the MMU and will
+override any MMU mappings.
+
+Code executing inside the ITCM does not "see" any MMU mappings
+and e.g. register accesses must be made to physical addresses.
+
+TCM is used for a few things:
+
+- FIQ and other interrupt handlers that need deterministic
+  timing and cannot wait for cache misses.
+
+- Idle loops where all external RAM is set to self-refresh
+  retention mode, so only on-chip RAM is accessible by
+  the CPU and then we hang inside ITCM waiting for an
+  interrupt.
+
+- Other operations which implies shutting off or reconfiguring
+  the external RAM controller.
+
+There is an interface for using TCM on the ARM architecture
+in <asm/tcm.h>. Using this interface it is possible to:
+
+- Define the physical address and size of ITCM and DTCM.
+
+- Tag functions to be compiled into ITCM.
+
+- Tag data and constants to be allocated to DTCM and ITCM.
+
+- Have the remaining TCM RAM added to a special
+  allocation pool with gen_pool_create() and gen_pool_add()
+  and provice tcm_alloc() and tcm_free() for this
+  memory. Such a heap is great for things like saving
+  device state when shutting off device power domains.
+
+A machine that has TCM memory shall select HAVE_TCM in
+arch/arm/Kconfig for itself, and then the
+rest of the functionality will depend on the physical
+location and size of ITCM and DTCM to be defined in
+mach/memory.h for the machine. Code that needs to use
+TCM shall #include <asm/tcm.h> If the TCM is not located
+at the place given in memory.h it will be moved using
+the TCM Region registers.
+
+Functions to go into itcm can be tagged like this:
+int __tcmfunc foo(int bar);
+
+Variables to go into dtcm can be tagged like this:
+int __tcmdata foo;
+
+Constants can be tagged like this:
+int __tcmconst foo;
+
+To put assembler into TCM just use
+.section ".tcm.text" or .section ".tcm.data"
+respectively.
+
+Example code:
+
+#include <asm/tcm.h>
+
+/* Uninitialized data */
+static u32 __tcmdata tcmvar;
+/* Initialized data */
+static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+/* Constant */
+static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+
+static void __tcmlocalfunc tcm_to_tcm(void)
+{
+	int i;
+	for (i = 0; i < 100; i++)
+		tcmvar ++;
+}
+
+static void __tcmfunc hello_tcm(void)
+{
+	/* Some abstract code that runs in ITCM */
+	int i;
+	for (i = 0; i < 100; i++) {
+		tcmvar ++;
+	}
+	tcm_to_tcm();
+}
+
+static void __init test_tcm(void)
+{
+	u32 *tcmem;
+	int i;
+
+	hello_tcm();
+	printk("Hello TCM executed from ITCM RAM\n");
+
+	printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
+	tcmvar = 0xDEADBEEFU;
+	printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
+
+	printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
+
+	printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
+
+	/* Allocate some TCM memory from the pool */
+	tcmem = tcm_alloc(20);
+	if (tcmem) {
+		printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
+		tcmem[0] = 0xDEADBEEFU;
+		tcmem[1] = 0x2BADBABEU;
+		tcmem[2] = 0xCAFEBABEU;
+		tcmem[3] = 0xDEADBEEFU;
+		tcmem[4] = 0x2BADBABEU;
+		for (i = 0; i < 5; i++)
+			printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
+		tcm_free(tcmem, 20);
+	}
+}
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 18b5ec8..bf4f4b7 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -282,9 +282,16 @@
 			to use for allocation size and alignment. For RAID5/6
 			systems this should be the number of data
 			disks *  RAID chunk size in file system blocks.
-delalloc	(*)	Deferring block allocation until write-out time.
-nodelalloc		Disable delayed allocation. Blocks are allocation
-			when data is copied from user to page cache.
+
+delalloc	(*)	Defer block allocation until just before ext4
+			writes out the block(s) in question.  This
+			allows ext4 to better allocation decisions
+			more efficiently.
+nodelalloc		Disable delayed allocation.  Blocks are allocated
+			when the data is copied from userspace to the
+			page cache, either via the write(2) system call
+			or when an mmap'ed page which was previously
+			unallocated is written for the first time.
 
 max_batch_time=usec	Maximum amount of time ext4 should wait for
 			additional filesystem operations to be batch
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index b5aee78..2c48f94 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1113,7 +1113,6 @@
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
- mb_history      multiblock allocation history
 ..............................................................................
 
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index b58b84b..eed520f 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -102,7 +102,7 @@
 		 winnt: emulate the Windows NT rule for display/create.
 		 mixed: emulate the Windows NT rule for display,
 			emulate the Windows 95 rule for create.
-		 Default setting is `lower'.
+		 Default setting is `mixed'.
 
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 6d03487..aafcaa6 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -199,18 +199,22 @@
 
 Not all bits in the mask can be modified.  Not all bits that can be
 modified do anything.  Not all hot keys can be individually controlled
-by the mask.  Some models do not support the mask at all, and in those
-models, hot keys cannot be controlled individually.  The behaviour of
-the mask is, therefore, highly dependent on the ThinkPad model.
+by the mask.  Some models do not support the mask at all.  The behaviour
+of the mask is, therefore, highly dependent on the ThinkPad model.
+
+The driver will filter out any unmasked hotkeys, so even if the firmware
+doesn't allow disabling an specific hotkey, the driver will not report
+events for unmasked hotkeys.
 
 Note that unmasking some keys prevents their default behavior.  For
 example, if Fn+F5 is unmasked, that key will no longer enable/disable
-Bluetooth by itself.
+Bluetooth by itself in firmware.
 
-Note also that not all Fn key combinations are supported through ACPI.
-For example, on the X40, the brightness, volume and "Access IBM" buttons
-do not generate ACPI events even with this driver.  They *can* be used
-through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
+Note also that not all Fn key combinations are supported through ACPI
+depending on the ThinkPad model and firmware version.  On those
+ThinkPads, it is still possible to support some extra hotkeys by
+polling the "CMOS NVRAM" at least 10 times per second.  The driver
+attempts to enables this functionality automatically when required.
 
 procfs notes:
 
@@ -255,18 +259,11 @@
 		1: does nothing
 
 	hotkey_mask:
-		bit mask to enable driver-handling (and depending on
+		bit mask to enable reporting (and depending on
 		the firmware, ACPI event generation) for each hot key
 		(see above).  Returns the current status of the hot keys
 		mask, and allows one to modify it.
 
-		Note: when NVRAM polling is active, the firmware mask
-		will be different from the value returned by
-		hotkey_mask.  The driver will retain enabled bits for
-		hotkeys that are under NVRAM polling even if the
-		firmware refuses them, and will not set these bits on
-		the firmware hot key mask.
-
 	hotkey_all_mask:
 		bit mask that should enable event reporting for all
 		supported hot keys, when echoed to hotkey_mask above.
@@ -279,7 +276,8 @@
 		bit mask that should enable event reporting for all
 		supported hot keys, except those which are always
 		handled by the firmware anyway.  Echo it to
-		hotkey_mask above, to use.
+		hotkey_mask above, to use.  This is the default mask
+		used by the driver.
 
 	hotkey_source_mask:
 		bit mask that selects which hot keys will the driver
@@ -287,9 +285,10 @@
 		based on the capabilities reported by the ACPI firmware,
 		but it can be overridden at runtime.
 
-		Hot keys whose bits are set in both hotkey_source_mask
-		and also on hotkey_mask are polled for in NVRAM.  Only a
-		few hot keys are available through CMOS NVRAM polling.
+		Hot keys whose bits are set in hotkey_source_mask are
+		polled for in NVRAM, and reported as hotkey events if
+		enabled in hotkey_mask.  Only a few hot keys are
+		available through CMOS NVRAM polling.
 
 		Warning: when in NVRAM mode, the volume up/down/mute
 		keys are synthesized according to changes in the mixer,
@@ -525,6 +524,7 @@
 0x2305		System is waking up from suspend to eject bay
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
+0x5010		Brightness level changed/control event
 
 The above events are never propagated by the driver.
 
@@ -532,7 +532,6 @@
 0x4003		Undocked (see 0x2x04), can sleep again
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
-0x5010		Brightness level changed (newer Lenovo BIOSes)
 
 The above events are propagated by the driver.
 
@@ -621,6 +620,8 @@
 2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
    and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN.  Process
    these keys on userspace somehow (e.g. by calling xbacklight).
+   The driver will do this automatically if it detects that ACPI video
+   has been disabled.
 
 
 Bluetooth
@@ -1459,3 +1460,8 @@
 0x020400:	Marker for 16 LEDs support.  Also, LEDs that are known
 		to not exist in a given model are not registered with
 		the LED sysfs class anymore.
+
+0x020500:	Updated hotkey driver, hotkey_mask is always available
+		and it is always able to disable hot keys.  Very old
+		thinkpads are properly supported.  hotkey_bios_mask
+		is deprecated and marked for removal.
diff --git a/MAINTAINERS b/MAINTAINERS
index e797c4d..c450f3a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -683,7 +683,7 @@
 ARM/INTEL IXP4XX ARM ARCHITECTURE
 M:	Imre Kaloz <kaloz@openwrt.org>
 M:	Krzysztof Halasa <khc@pm.waw.pl>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
 
@@ -740,18 +740,22 @@
 M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
-ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-M:	Marek Vasut <marek.vasut@gmail.com>
+ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
+P:	Marek Vasut
+M:	marek.vasut@gmail.com
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALM TREO 680 SUPPORT
 M:	Tomas Cech <sleep_walker@suse.cz>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALMZ72 SUPPORT
 M:	Sergey Lapin <slapin@ossfans.org>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
 
diff --git a/Makefile b/Makefile
index f908acc..00444a8 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 31
-EXTRAVERSION =
+SUBLEVEL = 32
+EXTRAVERSION = -rc2
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/kernel/init_task.c b/arch/alpha/kernel/init_task.c
index 19b8632..6f80ca4 100644
--- a/arch/alpha/kernel/init_task.c
+++ b/arch/alpha/kernel/init_task.c
@@ -13,6 +13,5 @@
 struct task_struct init_task = INIT_TASK(init_task);
 EXPORT_SYMBOL(init_task);
 
-union thread_union init_thread_union
-	__attribute__((section(".data.init_thread")))
-	= { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 6dc03c3..003ef4c 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -1,4 +1,5 @@
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
 #include <asm/page.h>
 
 OUTPUT_FORMAT("elf64-alpha")
@@ -31,88 +32,21 @@
 	} :kernel
 
 	RODATA
-
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/* Will be freed after init */
-	. = ALIGN(PAGE_SIZE);
-	/* Init code and data */
-	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	. = ALIGN(8);
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
-	. = ALIGN(8);
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-
-	. = ALIGN(8);
-	SECURITY_INIT
-
+	__init_begin = ALIGN(PAGE_SIZE);
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 	PERCPU(PAGE_SIZE)
-
-	. = ALIGN(2 * PAGE_SIZE);
+	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+	   needed for the THREAD_SIZE aligned init_task gets freed after init */
+	. = ALIGN(THREAD_SIZE);
 	__init_end = .;
 	/* Freed after init ends here */
 
-	/* Note 2 page alignment above.  */
-	.data.init_thread : {
-		*(.data.init_thread)
-	}
-
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.page_aligned)
-	}
-
-	. = ALIGN(64);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
-
 	_data = .;
-	/* Data */
-	.data : {
-		DATA_DATA
-		CONSTRUCTORS
-	}
+	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
 
 	.got : {
 		*(.got)
@@ -122,16 +56,7 @@
 	}
 	_edata = .;	/* End of data section */
 
-	__bss_start = .;
-	.sbss : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
+	BSS_SECTION(0, 0, 0)
 	_end = .;
 
 	.mdebug 0 : {
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d778a69..1c4119c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,6 +46,10 @@
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
+config HAVE_TCM
+	bool
+	select GENERIC_ALLOCATOR
+
 config NO_IOPORT
 	bool
 
@@ -649,6 +653,7 @@
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
 	select CPU_ARM926T
+	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_TIME
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 2293f0c..bd36c77 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -865,6 +865,7 @@
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_set_dir);
 
 int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 {
@@ -882,6 +883,7 @@
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_level);
 
 int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 {
@@ -899,6 +901,7 @@
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_output);
 
 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 {
@@ -920,6 +923,7 @@
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_write);
 
 static void locomo_m62332_sendbit(void *mapbase, int bit)
 {
@@ -1084,13 +1088,12 @@
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_m62332_senddata);
 
 /*
  *	Frontlight control
  */
 
-static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
-
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
 {
 	unsigned long flags;
@@ -1182,11 +1185,13 @@
 	driver->drv.bus = &locomo_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_register);
 
 void locomo_driver_unregister(struct locomo_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_unregister);
 
 static int __init locomo_init(void)
 {
@@ -1208,11 +1213,3 @@
 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
-
-EXPORT_SYMBOL(locomo_driver_register);
-EXPORT_SYMBOL(locomo_driver_unregister);
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-EXPORT_SYMBOL(locomo_gpio_read_level);
-EXPORT_SYMBOL(locomo_gpio_read_output);
-EXPORT_SYMBOL(locomo_gpio_write);
-EXPORT_SYMBOL(locomo_m62332_senddata);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 920ced0..f232941 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig
deleted file mode 100644
index 1db4969..0000000
--- a/arch/arm/configs/littleton_defconfig
+++ /dev/null
@@ -1,783 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Fri Dec 21 11:06:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-CONFIG_MACH_LITTLETON=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
new file mode 100644
index 0000000..733b851
--- /dev/null
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -0,0 +1,1332 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Mon Jul 13 22:48:49 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+CONFIG_CPU_PXA930=y
+CONFIG_CPU_PXA935=y
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+CONFIG_MACH_ZYLONITE=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_PXA930_ROTARY=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PXA930_TRKBALL=y
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MAX7301=y
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_DA903X=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
new file mode 100644
index 0000000..33bb725
--- /dev/null
+++ b/arch/arm/configs/xcep_defconfig
@@ -0,0 +1,1129 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 09:02:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=".xcep-itech"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_MACH_XCEP=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig
deleted file mode 100644
index 7949d04..0000000
--- a/arch/arm/configs/zylonite_defconfig
+++ /dev/null
@@ -1,736 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Tue Oct 23 13:33:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9ed2377..d0daeab 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -19,31 +19,21 @@
 
 #ifdef __KERNEL__
 
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
 #define atomic_read(v)	((v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
 /*
  * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
  * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
  */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
 static inline void atomic_add(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -163,8 +153,6 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long flags;
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index feaa75f..66c160b 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -4,7 +4,7 @@
 #ifndef __ASMARM_CACHE_H
 #define __ASMARM_CACHE_H
 
-#define L1_CACHE_SHIFT		5
+#define L1_CACHE_SHIFT		CONFIG_ARM_L1_CACHE_SHIFT
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
 /*
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index b3e656c..20ae96c 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -63,6 +63,11 @@
 	return read_cpuid(CPUID_CACHETYPE);
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
+{
+	return read_cpuid(CPUID_TCM);
+}
+
 /*
  * Intel's XScale3 core supports some v6 features (supersections, L2)
  * but advertises itself as v5 as it does not support the v6 ISA.  For
@@ -73,7 +78,10 @@
 #else
 static inline int cpu_is_xsc3(void)
 {
-	if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+	/* It covers both Intel ID and Marvell ID */
+	if ((id == 0x69056000) || (id == 0x56056000))
 		return 1;
 
 	return 0;
diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h
new file mode 100644
index 0000000..5929ef5
--- /dev/null
+++ b/arch/arm/include/asm/tcm.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#ifndef __ASMARM_TCM_H
+#define __ASMARM_TCM_H
+
+#ifndef CONFIG_HAVE_TCM
+#error "You should not be including tcm.h unless you have a TCM!"
+#endif
+
+#include <linux/compiler.h>
+
+/* Tag variables with this */
+#define __tcmdata __section(.tcm.data)
+/* Tag constants with this */
+#define __tcmconst __section(.tcm.rodata)
+/* Tag functions inside TCM called from outside TCM with this */
+#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
+/* Tag function inside TCM called from inside TCM  with this */
+#define __tcmlocalfunc __section(.tcm.text)
+
+void *tcm_alloc(size_t len);
+void tcm_free(void *addr, size_t len);
+
+#endif
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index 073e85b..bc63116 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -35,7 +35,9 @@
 
 #define ARM(x...)
 #define THUMB(x...)	x
+#ifdef __ASSEMBLY__
 #define W(instr)	instr.w
+#endif
 #define BSYM(sym)	sym + 1
 
 #else	/* !CONFIG_THUMB2_KERNEL */
@@ -45,7 +47,9 @@
 
 #define ARM(x...)	x
 #define THUMB(x...)
+#ifdef __ASSEMBLY__
 #define W(instr)	instr
+#endif
 #define BSYM(sym)	sym
 
 #endif	/* CONFIG_THUMB2_KERNEL */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index c446aef..79087dd 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -35,6 +35,7 @@
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
+obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3d727a8..0a2ba51 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -272,7 +272,15 @@
 	@
 	@  r0 - instruction
 	@
+#ifndef	CONFIG_THUMB2_KERNEL
 	ldr	r0, [r2, #-4]
+#else
+	ldrh	r0, [r2, #-2]			@ Thumb instruction at LR - 2
+	and	r9, r0, #0xf800
+	cmp	r9, #0xe800			@ 32-bit instruction if xx >= 0
+	ldrhhs	r9, [r2]			@ bottom 16 bits
+	orrhs	r0, r9, r0, lsl #16
+#endif
 	adr	r9, BSYM(1f)
 	bl	call_fpe
 
@@ -678,7 +686,9 @@
 	.word	no_fp
 	.previous
 
-no_fp:	mov	pc, lr
+ENTRY(no_fp)
+	mov	pc, lr
+ENDPROC(no_fp)
 
 __und_usr_unknown:
 	enable_irq
@@ -734,13 +744,6 @@
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
-	clrex
-#else
-	strex	r5, r4, [ip]			@ Clear exclusive monitor
-#endif
-#endif
 #if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
 #elif !defined(CONFIG_TLS_REG_EMUL)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a4eaf4f..ac34c0d 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -76,13 +76,27 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+	ldr	r0, [sp]
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#else
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#endif
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+#endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
 	.else
@@ -98,6 +112,7 @@
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
+	clrex					@ clear the exclusive monitor
 	ldr	r0, [sp, #S_SP]			@ top of the stack
 	ldr	r1, [sp, #S_PC]			@ return address
 	tst	r0, #4				@ orig stack 8-byte aligned?
@@ -110,6 +125,7 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
+	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index f692efd..60c62c3 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
@@ -83,10 +84,24 @@
 	flush_insns(p->addr, 1);
 }
 
+/*
+ * The actual disarming is done here on each CPU and synchronized using
+ * stop_machine. This synchronization is necessary on SMP to avoid removing
+ * a probe between the moment the 'Undefined Instruction' exception is raised
+ * and the moment the exception handler reads the faulting instruction from
+ * memory.
+ */
+int __kprobes __arch_disarm_kprobe(void *p)
+{
+	struct kprobe *kp = p;
+	*kp->addr = kp->opcode;
+	flush_insns(kp->addr, 1);
+	return 0;
+}
+
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	*p->addr = p->opcode;
-	flush_insns(p->addr, 1);
+	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d4d4f77..c6c57b6 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -45,6 +45,7 @@
 
 #include "compat.h"
 #include "atags.h"
+#include "tcm.h"
 
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
@@ -749,6 +750,7 @@
 #endif
 
 	cpu_init();
+	tcm_init();
 
 	/*
 	 * Set up various architecture-specific pointers
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
new file mode 100644
index 0000000..e503038
--- /dev/null
+++ b/arch/arm/kernel/tcm.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/genalloc.h>
+#include <linux/string.h> /* memcpy */
+#include <asm/page.h> /* PAGE_SHIFT */
+#include <asm/cputype.h>
+#include <asm/mach/map.h>
+#include <mach/memory.h>
+#include "tcm.h"
+
+/* Scream and warn about misuse */
+#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
+    !defined(DTCM_OFFSET) || !defined(DTCM_END)
+#error "TCM support selected but offsets not defined!"
+#endif
+
+static struct gen_pool *tcm_pool;
+
+/* TCM section definitions from the linker */
+extern char __itcm_start, __sitcm_text, __eitcm_text;
+extern char __dtcm_start, __sdtcm_data, __edtcm_data;
+
+/*
+ * TCM memory resources
+ */
+static struct resource dtcm_res = {
+	.name = "DTCM RAM",
+	.start = DTCM_OFFSET,
+	.end = DTCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct resource itcm_res = {
+	.name = "ITCM RAM",
+	.start = ITCM_OFFSET,
+	.end = ITCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct map_desc dtcm_iomap[] __initdata = {
+	{
+		.virtual	= DTCM_OFFSET,
+		.pfn		= __phys_to_pfn(DTCM_OFFSET),
+		.length		= (DTCM_END - DTCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+static struct map_desc itcm_iomap[] __initdata = {
+	{
+		.virtual	= ITCM_OFFSET,
+		.pfn		= __phys_to_pfn(ITCM_OFFSET),
+		.length		= (ITCM_END - ITCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+/*
+ * Allocate a chunk of TCM memory
+ */
+void *tcm_alloc(size_t len)
+{
+	unsigned long vaddr;
+
+	if (!tcm_pool)
+		return NULL;
+
+	vaddr = gen_pool_alloc(tcm_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	return (void *) vaddr;
+}
+EXPORT_SYMBOL(tcm_alloc);
+
+/*
+ * Free a chunk of TCM memory
+ */
+void tcm_free(void *addr, size_t len)
+{
+	gen_pool_free(tcm_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(tcm_free);
+
+
+static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+{
+	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
+				    256, 512, 1024, -1, -1, -1, -1 };
+	u32 tcm_region;
+	int tcm_size;
+
+	/* Read the special TCM region register c9, 0 */
+	if (!type)
+		asm("mrc	p15, 0, %0, c9, c1, 0"
+		    : "=r" (tcm_region));
+	else
+		asm("mrc	p15, 0, %0, c9, c1, 1"
+		    : "=r" (tcm_region));
+
+	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
+	if (tcm_size < 0) {
+		pr_err("CPU: %sTCM of unknown size!\n",
+			type ? "I" : "D");
+	} else {
+		pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+			type ? "I" : "D",
+			tcm_size,
+			(tcm_region & 0xfffff000U),
+			(tcm_region & 1) ? "" : "not ");
+	}
+
+	if (tcm_size != expected_size) {
+		pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
+		       type ? "I" : "D",
+		       tcm_size,
+		       expected_size);
+		/* Adjust to the expected size? what can we do... */
+	}
+
+	/* Force move the TCM bank to where we want it, enable */
+	tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+
+	if (!type)
+		asm("mcr	p15, 0, %0, c9, c1, 0"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+	else
+		asm("mcr	p15, 0, %0, c9, c1, 1"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+
+	pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
+		 type ? "I" : "D",
+		 tcm_size,
+		 (tcm_region & 0xfffff000U));
+}
+
+/*
+ * This initializes the TCM memory
+ */
+void __init tcm_init(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	char *start;
+	char *end;
+	char *ram;
+
+	/* Setup DTCM if present */
+	if (tcm_status & (1 << 16)) {
+		setup_tcm_bank(0, DTCM_OFFSET,
+			       (DTCM_END - DTCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &dtcm_res);
+		iotable_init(dtcm_iomap, 1);
+		/* Copy data from RAM to DTCM */
+		start = &__sdtcm_data;
+		end   = &__edtcm_data;
+		ram   = &__dtcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+	}
+
+	/* Setup ITCM if present */
+	if (tcm_status & 1) {
+		setup_tcm_bank(1, ITCM_OFFSET,
+			       (ITCM_END - ITCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &itcm_res);
+		iotable_init(itcm_iomap, 1);
+		/* Copy code from RAM to ITCM */
+		start = &__sitcm_text;
+		end   = &__eitcm_text;
+		ram   = &__itcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+	}
+}
+
+/*
+ * This creates the TCM memory pool and has to be done later,
+ * during the core_initicalls, since the allocator is not yet
+ * up and running when the first initialization runs.
+ */
+static int __init setup_tcm_pool(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	u32 dtcm_pool_start = (u32) &__edtcm_data;
+	u32 itcm_pool_start = (u32) &__eitcm_text;
+	int ret;
+
+	/*
+	 * Set up malloc pool, 2^2 = 4 bytes granularity since
+	 * the TCM is sometimes just 4 KiB. NB: pages and cache
+	 * line alignments does not matter in TCM!
+	 */
+	tcm_pool = gen_pool_create(2, -1);
+
+	pr_debug("Setting up TCM memory pool\n");
+
+	/* Add the rest of DTCM to the TCM pool */
+	if (tcm_status & (1 << 16)) {
+		if (dtcm_pool_start < DTCM_END) {
+			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
+					   DTCM_END - dtcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU DTCM: could not add DTCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 DTCM_END - dtcm_pool_start + 1,
+				 dtcm_pool_start);
+		}
+	}
+
+	/* Add the rest of ITCM to the TCM pool */
+	if (tcm_status & 1) {
+		if (itcm_pool_start < ITCM_END) {
+			ret = gen_pool_add(tcm_pool, itcm_pool_start,
+					   ITCM_END - itcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU ITCM: could not add ITCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 ITCM_END - itcm_pool_start + 1,
+				 itcm_pool_start);
+		}
+	}
+	return 0;
+}
+
+core_initcall(setup_tcm_pool);
diff --git a/arch/arm/kernel/tcm.h b/arch/arm/kernel/tcm.h
new file mode 100644
index 0000000..8015ad4
--- /dev/null
+++ b/arch/arm/kernel/tcm.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifdef CONFIG_HAVE_TCM
+void __init tcm_init(void);
+#else
+/* No TCM support, just blank inlines to be optimized out */
+inline void tcm_init(void)
+{
+}
+#endif
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 5cc4812..aecf87df 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -199,6 +199,63 @@
 	}
 	_edata_loc = __data_loc + SIZEOF(.data);
 
+#ifdef CONFIG_HAVE_TCM
+        /*
+	 * We align everything to a page boundary so we can
+	 * free it after init has commenced and TCM contents have
+	 * been copied to its destination.
+	 */
+	.tcm_start : {
+		. = ALIGN(PAGE_SIZE);
+		__tcm_start = .;
+		__itcm_start = .;
+	}
+
+	/*
+	 * Link these to the ITCM RAM
+	 * Put VMA to the TCM address and LMA to the common RAM
+	 * and we'll upload the contents from RAM to TCM and free
+	 * the used RAM after that.
+	 */
+	.text_itcm ITCM_OFFSET : AT(__itcm_start)
+	{
+		__sitcm_text = .;
+		*(.tcm.text)
+		*(.tcm.rodata)
+		. = ALIGN(4);
+		__eitcm_text = .;
+	}
+
+	/*
+	 * Reset the dot pointer, this is needed to create the
+	 * relative __dtcm_start below (to be used as extern in code).
+	 */
+	. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+	.dtcm_start : {
+		__dtcm_start = .;
+	}
+
+	/* TODO: add remainder of ITCM as well, that can be used for data! */
+	.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+	{
+		. = ALIGN(4);
+		__sdtcm_data = .;
+		*(.tcm.data)
+		. = ALIGN(4);
+		__edtcm_data = .;
+	}
+
+	/* Reset the dot pointer or the linker gets confused */
+	. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+	/* End marker for freeing TCM copy in linked object */
+	.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+		. = ALIGN(PAGE_SIZE);
+		__tcm_end = .;
+	}
+#endif
+
 	.bss : {
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 6ae04db..6ee2f67 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -12,8 +12,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 
-#define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
+#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
 
 		.text
 		.align	5
@@ -26,17 +27,16 @@
 ENTRY(copy_page)
 		stmfd	sp!, {r4, lr}			@	2
 	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r1, #32]		)
+	PLD(	pld	[r1, #L1_CACHE_BYTES]		)
 		mov	r2, #COPY_COUNT			@	1
 		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-1:	PLD(	pld	[r1, #64]		)
-	PLD(	pld	[r1, #96]		)
-2:		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
+1:	PLD(	pld	[r1, #2 * L1_CACHE_BYTES])
+	PLD(	pld	[r1, #3 * L1_CACHE_BYTES])
+2:
+	.rept	(2 * L1_CACHE_BYTES / 16 - 1)
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmia	r1!, {r3, r4, ip, lr}		@	4
+	.endr
 		subs	r2, r2, #1			@	1
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmgtia	r1!, {r3, r4, ip, lr}		@	4
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 412aa49..d1f775e 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -771,9 +771,9 @@
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -789,7 +789,7 @@
 };
 
 static struct platform_device at91cap9_ac97_device = {
-	.name		= "ac97c",
+	.name		= "atmel_ac97c",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
@@ -800,7 +800,7 @@
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -818,7 +818,7 @@
 	platform_device_register(&at91cap9_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d746e86..d581cff 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -24,11 +24,59 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
 /* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 8,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_DMA,
+		.end	= AT91SAM9G45_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  USB Host (OHCI)
  * -------------------------------------------------------------------- */
 
@@ -550,6 +598,61 @@
 
 
 /* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_AC97C,
+		.end	= AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_AC97C,
+		.end	= AT91SAM9G45_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD8, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD9, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD7, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD6, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9g45_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
 
@@ -1220,6 +1323,7 @@
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 7281865..d345f54 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -21,11 +21,57 @@
 #include <mach/at91sam9rl.h>
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
 /* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 2,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9RL_ID_DMA,
+		.end	= AT91SAM9RL_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
@@ -398,6 +444,61 @@
 
 
 /* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_AC97C,
+		.end	= AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_AC97C,
+		.end	= AT91SAM9RL_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD1, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD2, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD3, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD4, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9rl_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
 
@@ -1103,6 +1204,7 @@
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 83a1a0f..d694087 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -364,7 +364,7 @@
 /*
  * AC97
  */
-static struct atmel_ac97_data cap9adk_ac97_data = {
+static struct ac97c_platform_data cap9adk_ac97_data = {
 //	.reset_pin	= ... not connected
 };
 
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 8c0b71c..7c1e382 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -340,7 +340,7 @@
 /*
  * AC97
  */
-static struct atmel_ac97_data neocore926_ac97_data = {
+static struct ac97c_platform_data neocore926_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index b8558ea..64c3843 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -311,6 +311,14 @@
 
 
 /*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
+/*
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
 static struct gpio_led ek_leds[] = {
@@ -372,6 +380,8 @@
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 94ffb5c..bd28e98 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -211,6 +211,14 @@
 
 
 /*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
+/*
  * LEDs
  */
 static struct gpio_led ek_leds[] = {
@@ -299,6 +307,8 @@
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
 	/* LEDs */
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2a318eb..3f35293 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -19,6 +19,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/clkdev.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
@@ -400,7 +400,7 @@
 	return status & 8;
 }
 
-static struct mmc_platform_data mmc_data = {
+static struct mmci_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 4ef26fa..e5dcdf7 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,7 +38,7 @@
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
+	{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd57ec7..efaf053 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -54,7 +54,7 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static int sdp3430_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -88,11 +88,15 @@
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data sdp3430_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 5,
 	.cols		= 6,
-	.keymap		= sdp3430_keymap,
-	.keymapsize	= ARRAY_SIZE(sdp3430_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ec6854c..d110a7f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -80,7 +80,7 @@
 	},
 };
 
-static int ldp_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
 	KEY(2, 0, KEY_3),
@@ -101,11 +101,15 @@
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 6,
 	.cols		= 6,
-	.keymap		= ldp_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 500c995..70df6b4 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -139,8 +139,13 @@
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_cfg_reg(AG9_34XX_GPIO23);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_cfg_reg(AH8_34XX_GPIO29);
+	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(AH8_34XX_GPIO29);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d50b9be..e4ec0c5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -159,7 +159,7 @@
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int omap3evm_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -178,11 +178,15 @@
 	KEY(3, 3, KEY_P)
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data omap3evm_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 4,
 	.cols		= 4,
-	.keymap		= omap3evm_keymap,
-	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b43f6e3..7f6bf87 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -133,7 +133,7 @@
 	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 
-static int pandora_keypad_map[] = {
+static int board_keymap[] = {
 	/* col, row, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_0),
@@ -180,11 +180,15 @@
 	KEY(5, 2, KEY_FN),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data pandora_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 6,
-	.keymap		= pandora_keypad_map,
-	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e6e8290..b45ad31 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -36,7 +36,7 @@
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
-static int rx51_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_W),
 	KEY(0, 2, KEY_E),
@@ -83,11 +83,15 @@
 	KEY(0xff, 5, KEY_F10),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data rx51_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= rx51_keymap,
-	.keymapsize	= ARRAY_SIZE(rx51_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 324009e..b7b3220 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -27,7 +27,7 @@
 #include "mmc-twl4030.h"
 
 /* Zoom2 has Qwerty keyboard*/
-static int zoom2_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_E),
 	KEY(1, 0, KEY_R),
 	KEY(2, 0, KEY_T),
@@ -82,11 +82,15 @@
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= zoom2_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
index e4ebd6d..4af76bb 100644
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -22,7 +22,6 @@
 #include <asm/atomic.h>
 
 #include "cm.h"
-#include "cm-regbits-4xxx.h"
 
 /* XXX move this to cm.h */
 /* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
@@ -50,19 +49,7 @@
  */
 int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
 {
-	int i = 0;
-	u8 cm_id;
-	u16 prcm_mod_offs;
-	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
-
-	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
-	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
-
-	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
-				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
-	       (i++ < MAX_MODULE_READY_TIME))
-		udelay(1);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+	/* FIXME: Add clock manager related code */
+	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index bcfcfc7..faf7a1e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -355,29 +355,60 @@
 };
 #endif
 
-static void omap_init_mcspi(void)
+#ifdef CONFIG_ARCH_OMAP4
+static inline void omap4_mcspi_fixup(void)
 {
-	if (cpu_is_omap44xx()) {
-		omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
-		omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
-		omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
-		omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
-		omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
-		omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
-		omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
-		omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
-	}
-	platform_device_register(&omap2_mcspi1);
-	platform_device_register(&omap2_mcspi2);
+	omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
+	omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
+	omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
+	omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
+	omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
+	omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
+	omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
+	omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
+}
+#else
+static inline void omap4_mcspi_fixup(void)
+{
+}
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi3);
+static inline void omap2_mcspi3_init(void)
+{
+	platform_device_register(&omap2_mcspi3);
+}
+#else
+static inline void omap2_mcspi3_init(void)
+{
+}
 #endif
+
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi4);
+static inline void omap2_mcspi4_init(void)
+{
+	platform_device_register(&omap2_mcspi4);
+}
+#else
+static inline void omap2_mcspi4_init(void)
+{
+}
 #endif
+
+static void omap_init_mcspi(void)
+{
+	if (cpu_is_omap44xx())
+		omap4_mcspi_fixup();
+
+	platform_device_register(&omap2_mcspi1);
+	platform_device_register(&omap2_mcspi2);
+
+	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi3_init();
+
+	if (cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi4_init();
 }
 
 #else
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7574b6f..e3a3bad 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -294,10 +294,10 @@
 	else if (cpu_is_omap34xx())
 		hwmods = omap34xx_hwmods;
 
-	omap_hwmod_init(hwmods);
-	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	/* The OPP tables have to be registered before a clk init */
+	omap_hwmod_init(hwmods);
+	omap2_mux_init();
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 2d9b5cc..4a0e1cd 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -79,7 +79,7 @@
 		l = iommu_read_reg(obj, MMU_SYSSTATUS);
 		if (l & MMU_SYS_RESETDONE)
 			break;
-	} while (time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout));
 
 	if (!(l & MMU_SYS_RESETDONE)) {
 		dev_err(obj->dev, "can't take mmu out of reset\n");
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6f71f37..c035ad3 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -30,6 +30,14 @@
 #define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
 #define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
+/* SYSCONFIG: register bit definition */
+#define AUTOIDLE	(1 << 0)
+#define SOFTRESET	(1 << 1)
+#define SMARTIDLE	(2 << 3)
+
+/* SYSSTATUS: register bit definition */
+#define RESETDONE	(1 << 0)
+
 #define MBOX_REG_SIZE			0x120
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
 
@@ -69,21 +77,33 @@
 /* Mailbox H/W preparations */
 static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
-	unsigned int l;
+	u32 l;
+	unsigned long timeout;
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		printk("Could not get mailboxes_ick\n");
+		pr_err("Can't get mailboxes_ick\n");
 		return -ENODEV;
 	}
 	clk_enable(mbox_ick_handle);
 
+	mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = mbox_read_reg(MAILBOX_SYSSTATUS);
+		if (l & RESETDONE)
+			break;
+	} while (!time_after(jiffies, timeout));
+
+	if (!(l & RESETDONE)) {
+		pr_err("Can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
 	l = mbox_read_reg(MAILBOX_REVISION);
 	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
-	/* set smart-idle & autoidle */
-	l = mbox_read_reg(MAILBOX_SYSCONFIG);
-	l |= 0x00000011;
+	l = SMARTIDLE | AUTOIDLE;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
 	omap2_mbox_enable_irq(mbox, IRQ_RX);
@@ -156,6 +176,9 @@
 	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 
 	mbox_write_reg(bit, p->irqstatus);
+
+	/* Flush posted write for irq status to avoid spurious interrupts */
+	mbox_read_reg(p->irqstatus);
 }
 
 static int omap2_mbox_is_irq(struct omap_mbox *mbox,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 2daa595..b5fac32 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -460,6 +460,8 @@
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
@@ -472,6 +474,8 @@
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a529c7..ae21868 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -110,7 +110,7 @@
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 #ifdef CONFIG_ARCH_OMAP4
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -126,7 +126,7 @@
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -579,7 +579,7 @@
 	{
 		.pdev = {
 			.name			= "serial8250",
-			.id			= 3
+			.id			= 3,
 			.dev			= {
 				.platform_data	= serial_platform_data3,
 			},
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 89c992b..a6f8eab 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -21,6 +21,11 @@
 
 config CPU_PXA935
 	bool "PXA935 (codename Tavor-P65)"
+	select CPU_PXA930
+
+config CPU_PXA950
+	bool "PXA950 (codename Tavor-PV2)"
+	select CPU_PXA930
 
 endmenu
 
@@ -79,6 +84,12 @@
 	bool "Nec Mobilepro 900/c"
 	select PXA25x
 
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
 	select PXA25x
@@ -371,6 +382,15 @@
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 	  handheld computer.
 
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
 config MACH_PALMT5
 	bool "Palm Tungsten|T5"
 	default y
@@ -458,6 +478,7 @@
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -489,6 +510,21 @@
 	default y
 	depends on PXA_EZX
 
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select PXA25x
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d4c6122..f10e152 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -31,6 +31,7 @@
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
@@ -58,6 +59,7 @@
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
@@ -78,6 +80,8 @@
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
+
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
new file mode 100644
index 0000000..f23138b
--- /dev/null
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -0,0 +1,361 @@
+/*
+ *  linux/arch/arm/mach-pxa/balloon3.c
+ *
+ *  Support for Balloonboard.org Balloon3 board.
+ *
+ *  Author:	Nick Bane, Wookey, Jonathan McDowell
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from mainstone.c, by Nico Pitre
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+		(1 << BALLOON3_FEATURE_AUDIO) |
+		(1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+	if (!arg)
+		return 0;
+
+	return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+static void balloon3_mask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled &= ~(1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled |= (1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+	.name		= "FPGA",
+	.ack		= balloon3_mask_irq,
+	.mask		= balloon3_mask_irq,
+	.unmask		= balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+					balloon3_irq_enabled;
+
+	do {
+		/* clear useless edge notification */
+		if (desc->chip->ack)
+			desc->chip->ack(BALLOON3_AUX_NIRQ);
+		while (pending) {
+			irq = BALLOON3_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+			pending &= pending - 1;
+		}
+		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+				balloon3_irq_enabled;
+	} while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+	/* setup extra Balloon3 irqs */
+	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+		set_irq_chip(irq, &balloon3_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+	set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+	pr_debug("%s: chained handler installed - irq %d automatically "
+		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+static void balloon3_backlight_power(int on)
+{
+	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static unsigned long balloon3_lcd_pin_config[] = {
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	GPIO99_GPIO,		/* Backlight */
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_pxafb_info = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_backlight_power	= balloon3_backlight_power,
+};
+
+static unsigned long balloon3_mmc_pin_config[] = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
+static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		pr_debug("%s: on\n", __func__);
+		/* FIXME something to prod here? */
+	} else {
+		pr_debug("%s: off\n", __func__);
+		/* FIXME something to prod here? */
+	}
+}
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 	= balloon3_mci_setpower,
+};
+
+static int balloon3_udc_is_connected(void)
+{
+	pr_debug("%s: udc connected\n", __func__);
+	return 1;
+}
+
+static void balloon3_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
+		pr_debug("%s: connect\n", __func__);
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~UP2OCR_DPPUE;
+		pr_debug("%s: disconnect\n", __func__);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info = {
+	.udc_is_connected = balloon3_udc_is_connected,
+	.udc_command      = balloon3_udc_command,
+};
+
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+};
+
+static unsigned long balloon3_ohci_pin_config[] = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Wakeup GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* NAND & IDLE LED GPIOs */
+	GPIO9_GPIO,
+	GPIO10_GPIO,
+};
+
+static struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	},
+	{
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_leds_platform_data,
+	},
+};
+
+static void __init balloon3_init(void)
+{
+	pr_info("Initialising Balloon3\n");
+
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	pxa_set_i2c_info(NULL);
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+		pxa_set_ac97_info(NULL);
+
+	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
+			"LCD Backlight Power");
+		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+		set_pxa_fb_info(&balloon3_pxafb_info);
+	}
+
+	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+		pxa_set_mci_info(&balloon3_mci_platform_data);
+	}
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
+		pxa_set_ohci_info(&balloon3_ohci_platform_data);
+	}
+	pxa_set_udc_info(&balloon3_udc_info);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+	platform_device_register(&balloon3led_device);
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+	{	/* CPLD/FPGA */
+		.virtual	=  BALLOON3_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
+		.length		= BALLOON3_FPGA_LENGTH,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init balloon3_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+	/* Maintainer: Nick Bane. */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= balloon3_map_io,
+	.init_irq	= balloon3_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= balloon3_init,
+	.boot_params	= PHYS_OFFSET + 0x100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 5599bce..978a366 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -12,7 +12,6 @@
 	unsigned int		cken;
 	unsigned int		delay;
 	unsigned int		enabled;
-	struct clk		*other;
 };
 
 #define INIT_CLKREG(_clk,_devname,_conname)		\
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 1d2cec2..eea78b6 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -13,13 +13,18 @@
 #include <linux/sysdev.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+
 #include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
@@ -34,6 +39,10 @@
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
 
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP	(19)
+#define GPIO102_WLAN_RST	(102)
+
 static unsigned long cmx270_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
@@ -94,8 +103,8 @@
 	GPIO26_SSP1_RXD,
 
 	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_SSP2_SFRM,
+	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
+	GPIO14_GPIO,
 	GPIO87_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
@@ -123,6 +132,7 @@
 	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
 	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
 	GPIO53_GPIO,				/* PC card reset */
+	GPIO102_GPIO,				/* WLAN reset */
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
@@ -131,6 +141,7 @@
 	/* interrupts */
 	GPIO10_GPIO,	/* DM9000 interrupt */
 	GPIO83_GPIO,	/* MMC card detect */
+	GPIO95_GPIO,	/* WLAN interrupt */
 };
 
 /* V3020 RTC */
@@ -271,56 +282,12 @@
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static int cmx270_mci_init(struct device *dev,
-			   irq_handler_t cmx270_detect_int,
-			   void *data)
-{
-	int err;
-
-	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
-	if (err) {
-		dev_warn(dev, "power gpio unavailable\n");
-		return err;
-	}
-
-	gpio_direction_output(GPIO105_MMC_POWER, 0);
-
-	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		gpio_free(GPIO105_MMC_POWER);
-		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
-			" request MMC card detect IRQ\n");
-	}
-
-	return err;
-}
-
-static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		dev_dbg(dev, "power on\n");
-		gpio_set_value(GPIO105_MMC_POWER, 0);
-	} else {
-		gpio_set_value(GPIO105_MMC_POWER, 1);
-		dev_dbg(dev, "power off\n");
-	}
-}
-
-static void cmx270_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CMX270_MMC_IRQ, data);
-	gpio_free(GPIO105_MMC_POWER);
-}
-
 static struct pxamci_platform_data cmx270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cmx270_mci_init,
-	.setpower 	= cmx270_mci_setpower,
-	.exit		= cmx270_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO83_MMC_IRQ,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO105_MMC_POWER,
+	.gpio_power_invert	= 1,
 };
 
 static void __init cmx270_init_mmc(void)
@@ -331,6 +298,100 @@
 static inline void cmx270_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 1000,
+	.gpio_cs	= 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_GPIO,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+};
+
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		return err;
+
+	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+	if (err)
+		goto err_free_strap;
+
+	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+	gpio_set_value(GPIO102_WLAN_RST, 1);
+	msleep(100);
+
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return err;
+}
+
+static int cm_x270_libertas_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO102_WLAN_RST, 0);
+	gpio_free(GPIO102_WLAN_RST);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return 0;
+}
+
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= cm_x270_libertas_setup,
+	.teardown		= cm_x270_libertas_teardown,
+};
+
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+	{
+		.modalias		= "libertas_spi",
+		.max_speed_hz		= 13000000,
+		.bus_num		= 2,
+		.irq			= gpio_to_irq(95),
+		.chip_select		= 0,
+		.controller_data	= &cm_x270_libertas_chip,
+		.platform_data		= &cm_x270_libertas_pdata,
+	},
+};
+
+static void __init cmx270_init_spi(void)
+{
+	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
+}
+#else
+static inline void cmx270_init_spi(void) {}
+#endif
+
 void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
@@ -343,4 +404,5 @@
 	cmx270_init_mmc();
 	cmx270_init_ohci();
 	cmx270_init_2700G();
+	cmx270_init_spi();
 }
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 465da26..aac2cda 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -306,68 +306,21 @@
 }
 
 static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci_init,
-	.exit		= cm_x300_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= cm_x300_mci_init,
+	.exit			= cm_x300_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
-static int cm_x300_mci2_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO85_MMC2_WP);
-}
-
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-			     void *data)
-{
-	int err;
-
-	/*
-	 * setup GPIO for CM-X300 MMC controller
-	 */
-	err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(GPIO82_MMC2_IRQ);
-
-	err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(GPIO85_MMC2_WP);
-
-	err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(GPIO85_MMC2_WP);
-err_request_wp:
-	gpio_free(GPIO82_MMC2_IRQ);
-err_request_cd:
-	return err;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-	free_irq(CM_X300_MMC2_IRQ, data);
-	gpio_free(GPIO82_MMC2_IRQ);
-	gpio_free(GPIO85_MMC2_WP);
-}
-
 static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci2_init,
-	.exit		= cm_x300_mci2_exit,
-	.get_ro		= cm_x300_mci2_ro,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC2_IRQ,
+	.gpio_card_ro		= GPIO85_MMC2_WP,
+	.gpio_power		= -1,
 };
 
 static void __init cm_x300_init_mmc(void)
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 7c9c34c..37c239c 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -172,6 +172,7 @@
 {
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa300_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa310_init_ac97();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index a18d37b..4945728 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -164,15 +164,48 @@
 static inline void colibri_pxa320_init_ac97(void) {}
 #endif
 
+/*
+ * The following configuration is verified to work with the Toradex Orchid
+ * carrier board
+ */
+static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
+	/* UART 1 configuration (may be set by bootloader) */
+	GPIO99_UART1_CTS,
+	GPIO104_UART1_RTS,
+	GPIO97_UART1_RXD,
+	GPIO98_UART1_TXD,
+	GPIO101_UART1_DTR,
+	GPIO103_UART1_DSR,
+	GPIO100_UART1_DCD,
+	GPIO102_UART1_RI,
+
+	/* UART 2 configuration */
+	GPIO109_UART2_CTS,
+	GPIO112_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+
+	/* UART 3 configuration */
+	GPIO30_UART3_RXD,
+	GPIO31_UART3_TXD,
+};
+
+static void __init colibri_pxa320_init_uart(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
+}
+
 void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa320_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa320_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
+	colibri_pxa320_init_uart();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index ea34e34..efebaf4 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,6 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -95,10 +96,13 @@
 }
 
 static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init		= colibri_pxa3xx_mci_init,
-	.exit		= colibri_pxa3xx_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init			= colibri_pxa3xx_mci_init,
+	.exit			= colibri_pxa3xx_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
@@ -154,3 +158,43 @@
 }
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition colibri_nand_partitions[] = {
+	{
+		.name        = "bootloader",
+		.offset      = 0,
+		.size        = SZ_512K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.parts		= colibri_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+	pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 5363e1a..b536b5a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -29,6 +29,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -104,6 +105,28 @@
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 
+	/* GPIO Matrix Keypad */
+	GPIO66_GPIO,	/* column 0 */
+	GPIO67_GPIO,	/* column 1 */
+	GPIO68_GPIO,	/* column 2 */
+	GPIO69_GPIO,	/* column 3 */
+	GPIO70_GPIO,	/* column 4 */
+	GPIO71_GPIO,	/* column 5 */
+	GPIO72_GPIO,	/* column 6 */
+	GPIO73_GPIO,	/* column 7 */
+	GPIO74_GPIO,	/* column 8 */
+	GPIO75_GPIO,	/* column 9 */
+	GPIO76_GPIO,	/* column 10 */
+	GPIO77_GPIO,	/* column 11 */
+	GPIO58_GPIO,	/* row 0 */
+	GPIO59_GPIO,	/* row 1 */
+	GPIO60_GPIO,	/* row 2 */
+	GPIO61_GPIO,	/* row 3 */
+	GPIO62_GPIO,	/* row 4 */
+	GPIO63_GPIO,	/* row 5 */
+	GPIO64_GPIO,	/* row 6 */
+	GPIO65_GPIO,	/* row 7 */
+
 	/* GPIO */
 	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
 	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
@@ -267,9 +290,115 @@
 /*
  * Corgi Keyboard Device
  */
+#define CORGI_KEY_CALENDER	KEY_F1
+#define CORGI_KEY_ADDRESS	KEY_F2
+#define CORGI_KEY_FN		KEY_F3
+#define CORGI_KEY_CANCEL	KEY_F4
+#define CORGI_KEY_OFF		KEY_SUSPEND
+#define CORGI_KEY_EXOK		KEY_F5
+#define CORGI_KEY_EXCANCEL	KEY_F6
+#define CORGI_KEY_EXJOGDOWN	KEY_F7
+#define CORGI_KEY_EXJOGUP	KEY_F8
+#define CORGI_KEY_JAP1		KEY_LEFTCTRL
+#define CORGI_KEY_JAP2		KEY_LEFTALT
+#define CORGI_KEY_MAIL		KEY_F10
+#define CORGI_KEY_OK		KEY_F11
+#define CORGI_KEY_MENU		KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, CORGI_KEY_CALENDER),
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, CORGI_KEY_ADDRESS),
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 10, KEY_LEFTSHIFT),
+	KEY(5, 0, CORGI_KEY_MAIL),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, CORGI_KEY_FN),
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, CORGI_KEY_JAP1),
+	KEY(6, 2, CORGI_KEY_JAP2),
+	KEY(6, 3, CORGI_KEY_CANCEL),
+	KEY(6, 4, CORGI_KEY_OK),
+	KEY(6, 5, CORGI_KEY_MENU),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+	KEY(7, 0, CORGI_KEY_OFF),
+	KEY(7, 1, CORGI_KEY_EXOK),
+	KEY(7, 2, CORGI_KEY_EXCANCEL),
+	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+	KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+	.keymap		= corgikbd_keymap,
+	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+		{ 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+	.keymap_data		= &corgikbd_keymap_data,
+	.row_gpios		= corgikbd_row_gpios,
+	.col_gpios		= corgikbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device corgikbd_device = {
-	.name		= "corgi-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &corgikbd_pdata,
+	},
 };
 
 /*
@@ -307,111 +436,20 @@
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data corgi_mci_platform_data;
-
-static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
-	gpio_direction_input(CORGI_GPIO_nSD_WP);
-	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
-
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-				IRQF_DISABLED | IRQF_TRIGGER_RISING |
-				IRQF_TRIGGER_FALLING,
-				"MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_3;
-	}
-	return 0;
-
-err_free_3:
-	gpio_free(CORGI_GPIO_SD_PWR);
-err_free_2:
-	gpio_free(CORGI_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
-static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
-}
-
-static int corgi_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CORGI_GPIO_nSD_WP);
-}
-
-static void corgi_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(CORGI_GPIO_SD_PWR);
-	gpio_free(CORGI_GPIO_nSD_WP);
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data corgi_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= corgi_mci_init,
-	.get_ro		= corgi_mci_get_ro,
-	.setpower 	= corgi_mci_setpower,
-	.exit		= corgi_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
+	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
 
 
 /*
  * Irda
  */
-static void corgi_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int corgi_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void corgi_irda_shutdown(struct device *dev)
-{
-	gpio_free(CORGI_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
+	.gpio_pwdown		= CORGI_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= corgi_irda_transceiver_mode,
-	.startup		= corgi_irda_startup,
-	.shutdown		= corgi_irda_shutdown,
 };
 
 
@@ -636,6 +674,7 @@
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 7d3e1b4..79141f8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -130,61 +130,17 @@
 static int csb726_mci_init(struct device *dev,
 		irq_handler_t detect, void *data)
 {
-	int err;
-
 	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-
-	err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
-	if (err)
-		goto err_det_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
-	if (err)
-		goto err_det_dir;
-
-	err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
-	if (err)
-		goto err_ro_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_RO);
-	if (err)
-		goto err_ro_dir;
-
-	err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
-			IRQF_DISABLED, "MMC card detect", data);
-	if (err)
-		goto err_irq;
-
 	return 0;
-
-err_irq:
-err_ro_dir:
-	gpio_free(CSB726_GPIO_MMC_RO);
-err_ro_req:
-err_det_dir:
-	gpio_free(CSB726_GPIO_MMC_DETECT);
-err_det_req:
-	return err;
-}
-
-static int csb726_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CSB726_GPIO_MMC_RO);
-}
-
-static void csb726_mci_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
-	gpio_free(CSB726_GPIO_MMC_RO);
-	gpio_free(CSB726_GPIO_MMC_DETECT);
 }
 
 static struct pxamci_platform_data csb726_mci = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init		= csb726_mci_init,
-	.get_ro		= csb726_mci_get_ro,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init			= csb726_mci_init,
 	/* FIXME setpower */
-	.exit		= csb726_mci_exit,
+	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
+	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data csb726_ohci_platform_data = {
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index ecc08f3..46fabe1c 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -935,6 +935,33 @@
 {
 	pxa_register_device(&pxa3xx_device_nand, info);
 }
+
+static struct resource pxa3xx_resources_gcu[] = {
+	{
+		.start	= 0x54000000,
+		.end	= 0x54000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_GCU,
+		.end	= IRQ_GCU,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+	.name		= "pxa3xx-gcu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
+	.resource	= pxa3xx_resources_gcu,
+	.dev		= {
+		.dma_mask = &pxa3xx_gcu_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
 #endif /* CONFIG_PXA3xx */
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index ecc24a4..93817d9 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -35,4 +35,6 @@
 extern struct platform_device pxa3xx_device_nand;
 extern struct platform_device pxa3xx_device_i2c_power;
 
+extern struct platform_device pxa3xx_device_gcu;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index a36fc17..49acdfa 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -199,7 +199,6 @@
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 1d00110..4052ece 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -200,7 +200,6 @@
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9cd0946..aec7f42 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -646,13 +646,16 @@
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
-			  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
-			  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
-			  MMC_VDD_30_31|MMC_VDD_31_32,
-	.init 		= em_x270_mci_init,
-	.setpower 	= em_x270_mci_setpower,
-	.exit		= em_x270_mci_exit,
+	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+				  MMC_VDD_30_31|MMC_VDD_31_32,
+	.init 			= em_x270_mci_init,
+	.setpower 		= em_x270_mci_setpower,
+	.exit			= em_x270_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init em_x270_init_mmc(void)
@@ -1022,22 +1025,32 @@
 	return 0;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0,
-	.power = em_x270_sensor_power,
-};
-
 static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x48),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,
+	.power		= em_x270_sensor_power,
+	.board_info	= &em_x270_i2c_cam_info[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
+static struct platform_device em_x270_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &iclink,
 	},
 };
 
 static void  __init em_x270_init_camera(void)
 {
-	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
+	platform_device_register(&em_x270_camera);
 }
 #else
 static inline void em_x270_init_camera(void) {}
@@ -1103,6 +1116,7 @@
 REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
 REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
 
 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
 	static struct regulator_init_data _ldo##_data = {		\
@@ -1125,6 +1139,7 @@
 	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
 REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
 REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
 
 struct led_info em_x270_led_info = {
 	.name = "em-x270:orange",
@@ -1194,6 +1209,8 @@
 	DA9030_LDO(12),
 	DA9030_LDO(19),
 
+	DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
 	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
 	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
 	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
@@ -1245,7 +1262,6 @@
 
 static void __init em_x270_module_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
 	mmc_cd = GPIO13_MMC_CD;
@@ -1257,7 +1273,6 @@
 
 static void __init em_x270_exeda_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
 
 	mmc_cd = GPIO114_MMC_CD;
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c60dadf..91417f0 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -47,44 +47,9 @@
 	.gpio_pullup_inverted = 1
 };
 
-static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(GPIO_E7XX_IR_OFF, 1);
-		pxa2xx_transceiver_mode(dev, mode);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(GPIO_E7XX_IR_OFF, 0);
-	}
-}
-
-int e7xx_irda_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
-	if (ret)
-		goto out;
-
-	ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
-	if (ret)
-		goto out;
-
-	e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
-out:
-	return ret;
-}
-
-static void e7xx_irda_shutdown(struct device *dev)
-{
-	e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(GPIO_E7XX_IR_OFF);
-}
-
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = e7xx_irda_transceiver_mode,
-	.shutdown = e7xx_irda_shutdown,
+	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 int eseries_tmio_enable(struct platform_device *dev)
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index ca9912e..1708c01 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -88,7 +88,10 @@
 
 #ifdef CONFIG_MMC_PXA
 static struct pxamci_platform_data gumstix_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect 	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init gumstix_mmc_init(void)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 81359d5..abff9e1 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,6 +45,7 @@
 #include <mach/irda.h>
 #include <mach/pxa2xx_spi.h>
 
+#include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
 #include "devices.h"
@@ -174,14 +175,9 @@
  * IRDA
  */
 
-static void irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
-}
-
 static struct pxaficp_platform_data ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = irda_transceiver_mode,
+	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
@@ -368,8 +364,6 @@
  * LCD - Sony display connected to ATI Imageon w3220
  */
 
-static int lcd_power;
-
 static void sony_lcd_init(void)
 {
 	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
@@ -410,35 +404,6 @@
 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
 }
 
-static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
-{
-	switch (level) {
-	case FB_BLANK_UNBLANK:
-		sony_lcd_init();
-		break;
-	case FB_BLANK_NORMAL:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		sony_lcd_off();
-		break;
-	}
-	lcd_power = level;
-	return 0;
-}
-
-static int hx4700_lcd_get_power(struct lcd_device *lm)
-{
-	return lcd_power;
-}
-
-static struct lcd_ops hx4700_lcd_ops = {
-	.get_power = hx4700_lcd_get_power,
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct lcd_device *hx4700_lcd_device;
-
 #ifdef CONFIG_PM
 static void w3220_lcd_suspend(struct w100fb_par *wfb)
 {
@@ -573,6 +538,27 @@
 	.resource      = w3220_resources,
 };
 
+static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	if (power)
+		sony_lcd_init();
+	else
+		sony_lcd_off();
+}
+
+static struct plat_lcd_data hx4700_lcd_data = {
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct platform_device hx4700_lcd = {
+	.name = "platform-lcd",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &hx4700_lcd_data,
+		.parent        = &w3220.dev,
+	},
+};
+
 /*
  * Backlight
  */
@@ -872,9 +858,6 @@
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 
-	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
-					(void *)&w3220_info, &hx4700_lcd_ops);
-
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6243b5..b6486ef 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -168,7 +168,10 @@
 };
 
 static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init idp_init(void)
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 961807d..2a4945d 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -389,6 +389,9 @@
 static struct pxamci_platform_data imote2_mci_platform_data = {
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
 	.get_ro = imote2_mci_get_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power = -1,
 };
 
 static struct mtd_partition imote2flash_partitions[] = {
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
new file mode 100644
index 0000000..bfec09b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -0,0 +1,134 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/balloon3.h
+ *
+ *  Authors:	Nick Bane and Wookey
+ *  Created:	Oct, 2005
+ *  Copyright:	Toby Churchill Ltd
+ *  Cribbed from mainstone.c, by Nicholas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_BALLOON3_H
+#define ASM_ARCH_BALLOON3_H
+
+enum balloon3_features {
+	BALLOON3_FEATURE_OHCI,
+	BALLOON3_FEATURE_MMC,
+	BALLOON3_FEATURE_CF,
+	BALLOON3_FEATURE_AUDIO,
+	BALLOON3_FEATURE_TOPPOLY,
+};
+
+#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
+#define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
+#define BALLOON3_FPGA_LENGTH	0x01000000
+
+/* FPGA/CPLD registers */
+#define BALLOON3_PCMCIA0_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+/* fixme - same for now */
+#define BALLOON3_PCMCIA1_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_NANDIO_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+/* fpga/cpld interrupt control register */
+#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
+#define BALLOON3_NANDIO_CTL2_REG 	(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NANDIO_CTL_REG 	(BALLOON3_FPGA_VIRT + 0x00e00014)
+#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
+
+#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
+#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
+#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
+
+/* GPIOs for irqs */
+#define BALLOON3_GPIO_AUX_NIRQ		(94)
+#define BALLOON3_GPIO_CODEC_IRQ		(95)
+
+/* Timer and Idle LED locations */
+#define BALLOON3_GPIO_LED_NAND		(9)
+#define BALLOON3_GPIO_LED_IDLE		(10)
+
+/* backlight control */
+#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
+
+#define BALLOON3_GPIO_S0_CD		(105)
+
+/* FPGA Interrupt Mask/Acknowledge Register */
+#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
+#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
+
+/* CF Status Register */
+#define BALLOON3_PCMCIA_nIRQ		(1 << 0)  /* IRQ / ready signal */
+#define BALLOON3_PCMCIA_nSTSCHG_BVD1	(1 << 1)
+					/* VDD sense / card status changed */
+
+/* CF control register (write) */
+#define BALLOON3_PCMCIA_RESET		(1 << 0)   /* Card reset signal */
+#define BALLOON3_PCMCIA_ENABLE		(1 << 1)
+#define BALLOON3_PCMCIA_ADD_ENABLE	(1 << 2)
+
+/* CPLD (and FPGA) interface definitions */
+#define CPLD_LCD0_DATA_SET             0x00
+#define CPLD_LCD0_DATA_CLR             0x10
+#define CPLD_LCD0_COMMAND_SET          0x01
+#define CPLD_LCD0_COMMAND_CLR          0x11
+#define CPLD_LCD1_DATA_SET             0x02
+#define CPLD_LCD1_DATA_CLR             0x12
+#define CPLD_LCD1_COMMAND_SET          0x03
+#define CPLD_LCD1_COMMAND_CLR          0x13
+
+#define CPLD_MISC_SET                  0x07
+#define CPLD_MISC_CLR                  0x17
+#define CPLD_MISC_LOON_NRESET_BIT      0
+#define CPLD_MISC_LOON_UNSUSP_BIT      1
+#define CPLD_MISC_RUN_5V_BIT           2
+#define CPLD_MISC_CHG_D0_BIT           3
+#define CPLD_MISC_CHG_D1_BIT           4
+#define CPLD_MISC_DAC_NCS_BIT          5
+
+#define CPLD_LCD_SET                   0x08
+#define CPLD_LCD_CLR                   0x18
+#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
+#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
+#define CPLD_LCD_LED_RED_BIT           4
+#define CPLD_LCD_LED_GREEN_BIT         5
+#define CPLD_LCD_NRESET_BIT            7
+
+#define CPLD_LCD_RO_SET                0x09
+#define CPLD_LCD_RO_CLR                0x19
+#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
+#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
+
+#define CPLD_SERIAL_SET                0x0a
+#define CPLD_SERIAL_CLR                0x1a
+#define CPLD_SERIAL_GSM_RI_BIT         0
+#define CPLD_SERIAL_GSM_CTS_BIT        1
+#define CPLD_SERIAL_GSM_DTR_BIT        2
+#define CPLD_SERIAL_LPR_CTS_BIT        3
+#define CPLD_SERIAL_TC232_CTS_BIT      4
+#define CPLD_SERIAL_TC232_DSR_BIT      5
+
+#define CPLD_SROUTING_SET              0x0b
+#define CPLD_SROUTING_CLR              0x1b
+#define CPLD_SROUTING_MSP430_LPR       0
+#define CPLD_SROUTING_MSP430_TC232     1
+#define CPLD_SROUTING_MSP430_GSM       2
+#define CPLD_SROUTING_LOON_LPR         (0 << 4)
+#define CPLD_SROUTING_LOON_TC232       (1 << 4)
+#define CPLD_SROUTING_LOON_GSM         (2 << 4)
+
+#define CPLD_AROUTING_SET              0x0c
+#define CPLD_AROUTING_CLR              0x1c
+#define CPLD_AROUTING_MIC2PHONE_BIT    0
+#define CPLD_AROUTING_PHONE2INT_BIT    1
+#define CPLD_AROUTING_PHONE2EXT_BIT    2
+#define CPLD_AROUTING_LOONL2INT_BIT    3
+#define CPLD_AROUTING_LOONL2EXT_BIT    4
+#define CPLD_AROUTING_LOONR2PHONE_BIT  5
+#define CPLD_AROUTING_LOONR2INT_BIT    6
+#define CPLD_AROUTING_LOONR2EXT_BIT    7
+
+extern int balloon3_has(enum balloon3_features feature);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index a88d7ca..811743c 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -23,6 +23,12 @@
 extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index f6b4bf3..2418806 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -24,34 +24,27 @@
 		mov	\tmp, \tmp, lsr #13
 		and	\tmp, \tmp, #0x7		@ Core G
 		cmp	\tmp, #1
-		bhi	1004f
+		bhi	1002f
 
+		@ Core Generation 1 (PXA25x)
 		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
 		add	\base, \base, #0x00d00000
 		ldr	\irqstat, [\base, #0]		@ ICIP
 		ldr	\irqnr, [\base, #4]		@ ICMR
-		b	1002f
 
-1004:
-		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
-		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1003f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #(32 + PXA_IRQ(0))
-		b	1001f
-1003:
-		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
-		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
-1002:
 		ands	\irqnr, \irqstat, \irqnr
 		beq	1001f
 		rsb	\irqstat, \irqnr, #0
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
 		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
+		b	1001f
+1002:
+		@ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
+		mrc	p6, 0, \irqstat, c5, c0, 0	@ ICHP
+		tst	\irqstat, #0x80000000
+		beq	1001f
+		bic	\irqstat, \irqstat, #0x80000000
+		mov	\irqnr, \irqstat, lsr #16
 1001:
 		.endm
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 16ab795..aa3d9f7 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -197,6 +197,16 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA950
+#define __cpu_is_pxa950(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		id == 0x697;				\
+	 })
+#else
+#define __cpu_is_pxa950(id)	(0)
+#endif
+
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -249,6 +259,13 @@
 		__cpu_is_pxa935(id);			\
 	 })
 
+#define cpu_is_pxa950()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa950(id);			\
+	 })
+
+
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
index 0a50c3c..3cd41f7 100644
--- a/arch/arm/mach-pxa/include/mach/irda.h
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -12,6 +12,8 @@
 	void (*transceiver_mode)(struct device *dev, int mode);
 	int (*startup)(struct device *dev);
 	void (*shutdown)(struct device *dev);
+	int gpio_pwdown;		/* powerdown GPIO for the IrDA chip */
+	bool gpio_pwdown_inverted;	/* gpio_pwdown is inverted */
 };
 
 extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 6a1d959..3677a9a 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -68,9 +68,10 @@
 #ifdef CONFIG_PXA3xx
 #define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
 #define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller */
 #define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
 #define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
 #define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
@@ -81,8 +82,31 @@
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
 #endif
 
-#define PXA_GPIO_IRQ_BASE	PXA_IRQ(64)
-#define PXA_GPIO_IRQ_NUM	(128)
+#ifdef CONFIG_CPU_PXA935
+#define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
+#define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
+
+#define IRQ_MMC3_PXA935	PXA_IRQ(72)	/* MMC3 Controller (PXA935) */
+#define IRQ_MMC4_PXA935	PXA_IRQ(73)	/* MMC4 Controller (PXA935) */
+#define IRQ_MMC5_PXA935	PXA_IRQ(74)	/* MMC5 Controller (PXA935) */
+
+#define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
+#define IRQ_ACIPC0	PXA_IRQ(5)
+#define IRQ_ACIPC1	PXA_IRQ(40)
+#define IRQ_ACIPC2	PXA_IRQ(19)
+#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball */
+#endif
+
+#ifdef CONFIG_CPU_PXA950
+#define IRQ_GC500	PXA_IRQ(70)	/* Graphics Controller (PXA950) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
+#define PXA_GPIO_IRQ_NUM	(192)
 
 #define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
 #define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
@@ -105,6 +129,8 @@
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
 #elif defined(CONFIG_MACH_ZYLONITE)
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#elif defined(CONFIG_PXA_EZX)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 23)
 #else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 #endif
@@ -237,6 +263,16 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
 #define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
 #define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 4821850..271e249 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -16,305 +16,6 @@
 #ifndef __ASM_ARCH_MFP_H
 #define __ASM_ARCH_MFP_H
 
-#define mfp_to_gpio(m)	((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_INPUT		(0x6 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+#include <plat/mfp.h>
 
 #endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
index 6d1304c..02a69dc 100644
--- a/arch/arm/mach-pxa/include/mach/mmc.h
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -14,6 +14,11 @@
 	int (*get_ro)(struct device *);
 	void (*setpower)(struct device *, unsigned int);
 	void (*exit)(struct device *, void *);
+	int gpio_card_detect;			/* gpio detecting card insertion */
+	int gpio_card_ro;			/* gpio detecting read only toggle */
+	bool gpio_card_ro_invert;		/* gpio ro is inverted */
+	int gpio_power;				/* gpio powering up MMC bus */
+	bool gpio_power_invert;			/* gpio power is inverted */
 };
 
 extern void pxa_set_mci_info(struct pxamci_platform_data *info);
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
new file mode 100644
index 0000000..3dc9b07
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -0,0 +1,86 @@
+/*
+ * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
+ *
+ * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *		Holger Bocklet <bitz.email@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTC_H_
+#define _INCLUDE_PALMTC_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
+#define GPIO_NR_PALMTC_CRADLE_DETECT	5
+#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
+
+/* SD/MMC */
+#define GPIO_NR_PALMTC_SD_DETECT_N	12
+#define GPIO_NR_PALMTC_SD_POWER		32
+#define GPIO_NR_PALMTC_SD_READONLY	54
+
+/* WLAN */
+#define GPIO_NR_PALMTC_PCMCIA_READY	13
+#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
+#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
+#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
+#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
+#define GPIO_NR_PALMTC_PCMCIA_RESET	78
+
+/* UDC */
+#define GPIO_NR_PALMTC_USB_DETECT_N	4
+#define GPIO_NR_PALMTC_USB_POWER	36
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTC_BL_POWER		16
+#define GPIO_NR_PALMTC_LCD_POWER	44
+#define GPIO_NR_PALMTC_LCD_BLANK	38
+
+/* UART */
+#define GPIO_NR_PALMTC_RS232_POWER	37
+
+/* IRDA */
+#define GPIO_NR_PALMTC_IR_DISABLE	45
+
+/* IRQs */
+#define IRQ_GPIO_PALMTC_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY	IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+
+/* UCB1400 GPIOs */
+#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
+#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
+#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
+#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
+#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
+
+/** HERE ARE INIT VALUES **/
+#define PALMTC_UCB1400_GPIO_OFFSET	0x80
+
+/* BATTERY */
+#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
+#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
+#define PALMTC_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
+
+#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTC_MAX_INTENSITY		0xFE
+#define PALMTC_DEFAULT_INTENSITY	0x7E
+#define PALMTC_LIMIT_MASK		0x7F
+#define PALMTC_PRESCALER		0x3F
+#define PALMTC_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index e74082c..1be0db6 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -82,6 +82,11 @@
 #define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
 #define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
 
+#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
+#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
+#define PALMTX_NAND_ALE_VIRT	0xff100000
+#define PALMTX_NAND_CLE_VIRT	0xff200000
+
 /* TOUCHSCREEN */
 #define AC97_LINK_FRAME			21
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 7d1a059..e91d63c 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -208,7 +208,7 @@
 #define CKEN_MVED	43	/* < MVED clock enable */
 
 /* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
+#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
 
 #endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 6932720..f73061c 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -118,7 +118,8 @@
 	u_int		fixed_modes:1,
 			cmap_inverse:1,
 			cmap_static:1,
-			unused:29;
+			acceleration_enabled:1,
+			unused:28;
 
 	/* The following should be defined in LCCR0
 	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index ad23e74..68464ce 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -13,6 +13,7 @@
 #define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
 #define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
 #define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+#define ICHP		__REG(0x40D00018)  /* Interrupt Controller Highest Priority Register */
 
 #define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
 #define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
@@ -20,4 +21,14 @@
 #define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
 #define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
 
+#define ICIP3		__REG(0x40D00130)  /* Interrupt Controller IRQ Pending Register 3 */
+#define ICMR3		__REG(0x40D00134)  /* Interrupt Controller Mask Register 3 */
+#define ICLR3		__REG(0x40D00138)  /* Interrupt Controller Level Register 3 */
+#define ICFP3		__REG(0x40D0013C)  /* Interrupt Controller FIQ Pending Register 3 */
+#define ICPR3		__REG(0x40D00140)  /* Interrupt Controller Pending Register 3 */
+
+#define IPR(x)		__REG(0x40D0001C + (x < 32 ? (x << 2)		\
+				: (x < 64 ? (0x94 + ((x - 32) << 2))	\
+				: (0x128 + ((x - 64) << 2)))))
+
 #endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index b547494..237734b 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -37,7 +37,7 @@
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300())
+	    || machine_is_cm_x300() || machine_is_balloon3())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index f6e0300..d694ce2 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -120,7 +120,7 @@
 
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
-	int irq;
+	int irq, i;
 
 	pxa_internal_irq_nr = irq_nr;
 
@@ -129,6 +129,12 @@
 		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
 	}
 
+	/* initialize interrupt priority */
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < irq_nr; i++)
+			IPR(i) = i | (1 << 31);
+	}
+
 	/* only unmasked interrupts kick us out of idle */
 	ICCR = 1;
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 55b3788..1384895 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -265,45 +265,12 @@
 #endif
 
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int littleton_mci_init(struct device *dev,
-			      irq_handler_t littleton_detect_int, void *data)
-{
-	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-
-	gpio_direction_input(gpio_cd);
-
-	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "mmc card detect", data);
-	if (err) {
-		dev_err(dev, "failed to request card detect IRQ\n");
-		goto err_request_irq;
-	}
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void littleton_mci_exit(struct device *dev, void *data)
-{
-	int gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	free_irq(gpio_to_irq(gpio_cd), data);
-	gpio_free(gpio_cd);
-}
-
 static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= littleton_mci_init,
-	.exit		= littleton_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init littleton_init_mmc(void)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index f04c833..c6a94d3 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -482,11 +482,14 @@
 }
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay	= 1,
-	.init 		= lubbock_mci_init,
-	.get_ro		= lubbock_mci_get_ro,
-	.exit 		= lubbock_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay		= 1,
+	.init 			= lubbock_mci_init,
+	.get_ro			= lubbock_mci_get_ro,
+	.exit 			= lubbock_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
@@ -504,8 +507,9 @@
 }
 
 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode = lubbock_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
+	.transceiver_mode	= lubbock_irda_transceiver_mode,
 };
 
 static void __init lubbock_init(void)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index ca39669..5360c07 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -140,15 +140,9 @@
  * IRDA
  */
 
-static void magician_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data magician_ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = magician_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
@@ -651,55 +645,24 @@
 static int magician_mci_init(struct device *dev,
 				irq_handler_t detect_irq, void *data)
 {
-	int err;
-
-	err = request_irq(IRQ_MAGICIAN_SD, detect_irq,
+	return request_irq(IRQ_MAGICIAN_SD, detect_irq,
 				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-				"MMC card detect", data);
-	if (err)
-		goto err_request_irq;
-	err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER");
-	if (err)
-		goto err_request_power;
-	err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY");
-	if (err)
-		goto err_request_readonly;
-
-	return 0;
-
-err_request_readonly:
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
-err_request_power:
-	free_irq(IRQ_MAGICIAN_SD, data);
-err_request_irq:
-	return err;
-}
-
-static void magician_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *pdata = dev->platform_data;
-
-	gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
-}
-
-static int magician_mci_get_ro(struct device *dev)
-{
-	return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
+				"mmc card detect", data);
 }
 
 static void magician_mci_exit(struct device *dev, void *data)
 {
-	gpio_free(EGPIO_MAGICIAN_nSD_READONLY);
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
 	free_irq(IRQ_MAGICIAN_SD, data);
 }
 
 static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     = magician_mci_init,
-	.get_ro   = magician_mci_get_ro,
-	.setpower = magician_mci_setpower,
-	.exit     = magician_mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init     		= magician_mci_init,
+	.exit     		= magician_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
+	.gpio_card_ro_invert	= 1,
+	.gpio_power		= EGPIO_MAGICIAN_SD_POWER,
 };
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f4dabf0..a4eeae3 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -450,10 +450,13 @@
 }
 
 static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= mainstone_mci_init,
-	.setpower 	= mainstone_mci_setpower,
-	.exit		= mainstone_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= mainstone_mci_init,
+	.setpower 		= mainstone_mci_setpower,
+	.exit			= mainstone_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
@@ -476,8 +479,9 @@
 }
 
 static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode = mainstone_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= mainstone_irda_transceiver_mode,
 };
 
 static struct gpio_keys_button gpio_keys_button[] = {
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2d28132..3cab452 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -434,72 +434,15 @@
 /*
  * SDIO/MMC Card controller
  */
-static void mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		gpio_set_value(GPIO91_SDIO_EN, 1);	/* enable SDIO power */
-	else
-		gpio_set_value(GPIO91_SDIO_EN, 0);	/* disable SDIO power */
-}
-
-static int mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO78_SDIO_RO);
-}
-
-struct gpio_ress mci_gpios[] = {
-	MIO_GPIO_IN(GPIO78_SDIO_RO, 	"SDIO readonly detect"),
-	MIO_GPIO_IN(GPIO15_SDIO_INSERT,	"SDIO insertion detect"),
-	MIO_GPIO_OUT(GPIO91_SDIO_EN, 0,	"SDIO power enable")
-};
-
-static void mci_exit(struct device *dev, void *data)
-{
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-	free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
-}
-
-static struct pxamci_platform_data mioa701_mci_info;
-
 /**
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
-{
-	int rc;
-	int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
-
-	rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
-	if (rc)
-		goto err_gpio;
-	/* enable RE/FE interrupt on card insertion and removal */
-	rc = request_irq(irq, detect_int,
-			 IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			 IRQF_TRIGGER_FALLING,
-			 "MMC card detect", data);
-	if (rc)
-		goto err_irq;
-
-	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
-	return 0;
-
-err_irq:
-	dev_err(dev, "mioa701_mci_init: MMC/SD:"
-		" can't request MMC card detect IRQ\n");
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-err_gpio:
-	return rc;
-}
-
 static struct pxamci_platform_data mioa701_mci_info = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init	  = mci_init,
-	.get_ro	  = mci_get_ro,
-	.setpower = mci_setpower,
-	.exit	  = mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO15_SDIO_INSERT,
+	.gpio_card_ro		= GPIO78_SDIO_RO,
+	.gpio_power		= GPIO91_SDIO_EN,
 };
 
 /* FlashRAM */
@@ -765,19 +708,20 @@
 	},
 };
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match id in pxa27x_device_camera in device.c */
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
 	{
-		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("mt9m111", 0x5d),
-		.platform_data = &iclink,
 	},
 };
 
+static struct soc_camera_link iclink = {
+	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
+	.board_info	= &mioa701_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
 struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
@@ -811,6 +755,7 @@
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
+MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -821,6 +766,7 @@
 	&power_dev,
 	&strataflash,
 	&gpio_vbus,
+	&mioa701_camera,
 	&mioa701_board,
 };
 
@@ -841,7 +787,7 @@
 static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
-	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
 };
 
 static void __init mioa701_machine_init(void)
@@ -855,6 +801,7 @@
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
+	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
@@ -869,7 +816,6 @@
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }
 
 static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 169fcc1..1ad029d 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -25,6 +25,9 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -141,85 +144,50 @@
 };
 
 /******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmld_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmld_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmld_partitions,
+		.nr_parts	= ARRAY_SIZE(palmld_partitions)
+	}
+};
+
+static struct resource palmld_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_4M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmld_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmld_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmld_flash_data,
+	},
+};
+
+/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
-			palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmld_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-}
-
-static void palmld_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmld_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmld_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmld_mci_power,
-	.get_ro		= palmld_mci_get_ro,
-	.init 		= palmld_mci_init,
-	.exit		= palmld_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
@@ -336,35 +304,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmld_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmld_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-}
-
-static void palmld_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmld_ficp_platform_data = {
-	.startup		= palmld_irda_startup,
-	.shutdown		= palmld_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmld_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMLD_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
@@ -560,6 +502,7 @@
 	&power_supply,
 	&palmld_asoc,
 	&palmld_hdd,
+	&palmld_flash,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 33f726f..2dd7ce2 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -124,83 +124,12 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
-			palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmt5_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-	free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-}
-
-static void palmt5_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmt5_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmt5_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmt5_mci_power,
-	.get_ro		= palmt5_mci_get_ro,
-	.init 		= palmt5_mci_init,
-	.exit		= palmt5_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
@@ -314,35 +243,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmt5_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmt5_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-}
-
-static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmt5_ficp_platform_data = {
-	.startup		= palmt5_irda_startup,
-	.shutdown		= palmt5_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmt5_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMT5_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
new file mode 100644
index 0000000..bb2cc0d
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-pxa/palmtc.c
+ *
+ * Support for the Palm Tungsten|C
+ *
+ * Author:	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Petr Blaha <p3t3@centrum.cz>
+ *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/ucb1400.h>
+#include <linux/power_supply.h>
+#include <linux/gpio_keys.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtc.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtc_pin_config[] __initdata = {
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+	GPIO12_GPIO,	/* detect */
+	GPIO32_GPIO,	/* power */
+	GPIO54_GPIO,	/* r/o switch */
+
+	/* PCMCIA */
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO45_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO17_PWM1_OUT,
+
+	/* USB */
+	GPIO4_GPIO,	/* detect */
+	GPIO36_GPIO,	/* pullup */
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MATRIX KEYPAD */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
+	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
+	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
+	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
+	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
+	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
+	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
+	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
+	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
+	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
+	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
+	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
+	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
+	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
+	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
+
+	/* PXA GPIO KEYS */
+	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
+
+	/* MISC */
+	GPIO1_RST,	/* reset */
+	GPIO2_GPIO,	/* earphone detect */
+	GPIO16_GPIO,	/* backlight switch */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static struct pxamci_platform_data palmtc_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
+	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
+	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
+	.detect_delay		= 20,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtc_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
+};
+
+static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
+	.buttons	= palmtc_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
+};
+
+static struct platform_device palmtc_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtc_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtc_backlight_notify(int brightness)
+{
+	/* backlight is on when GPIO16 AF0 is high */
+	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
+	return brightness;
+}
+
+static void palmtc_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtc_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= PALMTC_MAX_INTENSITY,
+	.dft_brightness	= PALMTC_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTC_PERIOD_NS,
+	.init		= palmtc_backlight_init,
+	.notify		= palmtc_backlight_notify,
+	.exit		= palmtc_backlight_exit,
+};
+
+static struct platform_device palmtc_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa25x_device_pwm1.dev,
+		.platform_data	= &palmtc_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data palmtc_ficp_platform_data = {
+	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * Keyboard
+ ******************************************************************************/
+static const uint32_t palmtc_matrix_keys[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(0, 1, KEY_X),
+	KEY(0, 2, KEY_POWER),
+	KEY(0, 3, KEY_TAB),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_LEFTSHIFT),
+	KEY(0, 7, KEY_Z),
+	KEY(0, 8, KEY_S),
+	KEY(0, 9, KEY_W),
+	KEY(0, 10, KEY_E),
+	KEY(0, 11, KEY_UP),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 3, KEY_D),
+	KEY(1, 4, KEY_C),
+	KEY(1, 5, KEY_F),
+	KEY(1, 6, KEY_R),
+	KEY(1, 7, KEY_SPACE),
+	KEY(1, 8, KEY_V),
+	KEY(1, 9, KEY_G),
+	KEY(1, 10, KEY_T),
+	KEY(1, 11, KEY_LEFT),
+
+	KEY(2, 0, KEY_F3),
+	KEY(2, 1, KEY_LEFTCTRL),
+	KEY(2, 3, KEY_H),
+	KEY(2, 4, KEY_Y),
+	KEY(2, 5, KEY_N),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_U),
+	KEY(2, 8, KEY_M),
+	KEY(2, 9, KEY_K),
+	KEY(2, 10, KEY_I),
+	KEY(2, 11, KEY_RIGHT),
+
+	KEY(3, 0, KEY_F4),
+	KEY(3, 1, KEY_ENTER),
+	KEY(3, 3, KEY_DOT),
+	KEY(3, 4, KEY_L),
+	KEY(3, 5, KEY_O),
+	KEY(3, 6, KEY_LEFTALT),
+	KEY(3, 7, KEY_ENTER),
+	KEY(3, 8, KEY_BACKSPACE),
+	KEY(3, 9, KEY_P),
+	KEY(3, 10, KEY_B),
+	KEY(3, 11, KEY_FN),
+};
+
+const struct matrix_keymap_data palmtc_keymap_data = {
+	.keymap			= palmtc_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
+};
+
+const static unsigned int palmtc_keypad_row_gpios[] = {
+	0, 9, 10, 11
+};
+
+const static unsigned int palmtc_keypad_col_gpios[] = {
+	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
+};
+
+static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
+	.keymap_data	= &palmtc_keymap_data,
+	.col_gpios	= palmtc_keypad_row_gpios,
+	.num_col_gpios	= 12,
+	.row_gpios	= palmtc_keypad_col_gpios,
+	.num_row_gpios	= 4,
+	.active_low	= 1,
+
+	.debounce_ms		= 20,
+	.col_scan_delay_us	= 5,
+};
+
+static struct platform_device palmtc_keyboard = {
+	.name	= "matrix-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_keypad_platform_data,
+	},
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
+};
+
+/******************************************************************************
+ * Touchscreen / Battery / GPIO-extender
+ ******************************************************************************/
+static struct platform_device palmtc_ucb1400_core = {
+	.name	= "ucb1400_core",
+	.id	= -1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct resource palmtc_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_16M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition palmtc_flash_parts[] = {
+	{
+		.name	= "U-Boot Bootloader",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "Linux Kernel",
+		.offset	= 0x40000,
+		.size	= 0x2c0000,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= 0x300000,
+		.size	= 0xcc0000,
+	},
+	{
+		.name	= "U-Boot Environment",
+		.offset	= 0xfc0000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data palmtc_flash_data = {
+	.width		= 4,
+	.parts		= palmtc_flash_parts,
+	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
+};
+
+static struct platform_device palmtc_flash = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &palmtc_flash_resource,
+	.num_resources	= 1,
+	.dev = {
+		.platform_data	= &palmtc_flash_data,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtc_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtc_lcd_screen = {
+	.modes			= palmtc_lcd_modes,
+	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmtc_backlight,
+	&palmtc_ucb1400_core,
+	&palmtc_keyboard,
+	&palmtc_pxa_keys,
+	&palmtc_flash,
+};
+
+static void __init palmtc_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+
+	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_mci_info(&palmtc_mci_platform_data);
+	pxa_set_udc_info(&palmtc_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtc_ficp_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+};
+
+MACHINE_START(PALMTC, "Palm Tungsten|C")
+	.phys_io	= 0x40000000,
+	.boot_params 	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtc_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index d823b09..277c406 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -117,83 +117,11 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmte2_mci_init(struct device *dev,
-				irq_handler_t palmte2_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
-			palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmte2_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-}
-
-static void palmte2_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmte2_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmte2_mci_power,
-	.get_ro		= palmte2_mci_get_ro,
-	.init 		= palmte2_mci_init,
-	.exit		= palmte2_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTE2_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTE2_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTE2_SD_POWER,
 };
 
 /******************************************************************************
@@ -287,35 +215,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmte2_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmte2_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-}
-
-static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.startup		= palmte2_irda_startup,
-	.shutdown		= palmte2_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmte2_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 83d0208..76a2b37 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -28,6 +28,10 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -131,6 +135,10 @@
 	GPIO34_FFUART_RXD,
 	GPIO39_FFUART_TXD,
 
+	/* NAND */
+	GPIO15_nCS_1,
+	GPIO18_RDY,
+
 	/* MISC. */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO12_GPIO,	/* power detect */
@@ -138,85 +146,50 @@
 };
 
 /******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmtx_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmtx_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmtx_partitions,
+		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
+	}
+};
+
+static struct resource palmtx_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmtx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmtx_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmtx_flash_data,
+	},
+};
+
+/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
-			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmtx_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-}
-
-static void palmtx_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmtx_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmtx_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmtx_mci_power,
-	.get_ro		= palmtx_mci_get_ro,
-	.init 		= palmtx_mci_init,
-	.exit		= palmtx_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
@@ -330,35 +303,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmtx_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmtx_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-}
-
-static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
-	.startup		= palmtx_irda_startup,
-	.shutdown		= palmtx_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmtx_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTX_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
@@ -493,6 +440,68 @@
 };
 
 /******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, PALMTX_NAND_CLE_VIRT);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, PALMTX_NAND_ALE_VIRT);
+	else
+		writeb(cmd, nandaddr);
+}
+
+static struct mtd_partition palmtx_partition_info[] = {
+	[0] = {
+		.name	= "palmtx-0",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data palmtx_nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
+		.partitions		= palmtx_partition_info,
+		.chip_delay		= 20,
+		.part_probe_types 	= palmtx_part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= palmtx_nand_cmd_ctl,
+	},
+};
+
+static struct resource palmtx_nand_resource[] = {
+	[0]	= {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device palmtx_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
+	.resource	= palmtx_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmtx_nand_platdata,
+	}
+};
+
+/******************************************************************************
  * Power management - standby
  ******************************************************************************/
 static void __init palmtx_pm_init(void)
@@ -518,6 +527,8 @@
 	&power_supply,
 	&palmtx_asoc,
 	&palmtx_gpio_vbus,
+	&palmtx_flash,
+	&palmtx_nand,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -525,8 +536,18 @@
 	.virtual	= PALMTX_PCMCIA_VIRT,
 	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
 	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE
-},
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_ALE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_CLE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}
 };
 
 static void __init palmtx_map_io(void)
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c3645aa..c2bf493 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -129,88 +129,14 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmz72_mci_init(struct device *dev,
-				irq_handler_t palmz72_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
-			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	/* SD_POWER is not actually power, but it is more like chip
-	 * select, i.e. it is inverted */
-
-	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	if (err)
-		goto err4;
-	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-err4:
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmz72_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-}
-
-static void palmz72_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	if (p_d->ocr_mask & (1 << vdd))
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	else
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
-}
-
-static int palmz72_mci_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
-}
-
+/* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
 static struct pxamci_platform_data palmz72_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmz72_mci_power,
-	.get_ro		= palmz72_mci_ro,
-	.init 		= palmz72_mci_init,
-	.exit		= palmz72_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMZ72_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMZ72_SD_RO,
+	.gpio_power		= GPIO_NR_PALMZ72_SD_POWER_N,
+	.gpio_power_invert	= 1,
 };
 
 /******************************************************************************
@@ -304,35 +230,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmz72_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmz72_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-}
-
-static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmz72_ficp_platform_data = {
-	.startup		= palmz72_irda_startup,
-	.shutdown		= palmz72_irda_shutdown,
+	.gpio_pwdown		= GPIO_NR_PALMZ72_IR_DISABLE,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= palmz72_irda_transceiver_mode,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 01791d7..bbda570 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -321,11 +321,14 @@
 #define MSECS_PER_JIFFY (1000/HZ)
 
 static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay	= 250 / MSECS_PER_JIFFY,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= pcm990_mci_init,
-	.setpower 	= pcm990_mci_setpower,
-	.exit		= pcm990_mci_exit,
+	.detect_delay		= 250 / MSECS_PER_JIFFY,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 			= pcm990_mci_init,
+	.setpower 		= pcm990_mci_setpower,
+	.exit			= pcm990_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data pcm990_ohci_platform_data = {
@@ -427,25 +430,56 @@
 	gpio_bus_switch = -EINVAL;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match with the camera ID above */
-	.query_bus_param = pcm990_camera_query_bus_param,
-	.set_bus_param = pcm990_camera_set_bus_param,
-	.free_bus = pcm990_camera_free_bus,
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 	{
 		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("pca9536", 0x41),
 		.platform_data = &pca9536_data,
-	}, {
+	},
+};
+
+static struct i2c_board_info pcm990_camera_i2c[] = {
+	{
 		I2C_BOARD_INFO("mt9v022", 0x48),
-		.platform_data = &iclink, /* With extender */
 	}, {
 		I2C_BOARD_INFO("mt9m001", 0x5d),
-		.platform_data = &iclink, /* With extender */
+	},
+};
+
+static struct soc_camera_link iclink[] = {
+	{
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[0],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9v022",
+	}, {
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[1],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9m001",
+	},
+};
+
+static struct platform_device pcm990_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &iclink[0],
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &iclink[1],
+		},
 	},
 };
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
@@ -501,6 +535,9 @@
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
+
+	platform_device_register(&pcm990_camera[0]);
+	platform_device_register(&pcm990_camera[1]);
 #endif
 
 	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 9352d4a..a186994 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -245,20 +245,10 @@
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data poodle_mci_platform_data;
-
 static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
 {
 	int err;
 
-	err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
 	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
 	if (err)
 		goto err_free_2;
@@ -267,34 +257,14 @@
 	if (err)
 		goto err_free_3;
 
-	gpio_direction_input(POODLE_GPIO_nSD_DETECT);
-	gpio_direction_input(POODLE_GPIO_nSD_WP);
-
 	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
 	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
 
-	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_4;
-	}
-
 	return 0;
 
-err_free_4:
-	gpio_free(POODLE_GPIO_SD_PWR1);
 err_free_3:
 	gpio_free(POODLE_GPIO_SD_PWR);
 err_free_2:
-	gpio_free(POODLE_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(POODLE_GPIO_nSD_DETECT);
-err_out:
 	return err;
 }
 
@@ -312,62 +282,29 @@
 	}
 }
 
-static int poodle_mci_get_ro(struct device *dev)
-{
-	return !!gpio_get_value(POODLE_GPIO_nSD_WP);
-	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
-}
-
-
 static void poodle_mci_exit(struct device *dev, void *data)
 {
-	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
 	gpio_free(POODLE_GPIO_SD_PWR1);
 	gpio_free(POODLE_GPIO_SD_PWR);
-	gpio_free(POODLE_GPIO_nSD_WP);
-	gpio_free(POODLE_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= poodle_mci_init,
-	.get_ro		= poodle_mci_get_ro,
-	.setpower 	= poodle_mci_setpower,
-	.exit		= poodle_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= poodle_mci_init,
+	.setpower 		= poodle_mci_setpower,
+	.exit			= poodle_mci_exit,
+	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
 /*
  * Irda
  */
-static void poodle_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int poodle_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(POODLE_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void poodle_irda_shutdown(struct device *dev)
-{
-	gpio_free(POODLE_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
+	.gpio_pwdown		= POODLE_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= poodle_irda_transceiver_mode,
-	.startup		= poodle_irda_startup,
-	.shutdown		= poodle_irda_shutdown,
 };
 
 
@@ -521,6 +458,7 @@
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
+	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2f3394f..8682704 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -52,3 +52,4 @@
 	} else
 		BUG();
 }
+EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 4ba6d21..f4af6e2b 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -84,9 +84,11 @@
 };
 
 static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
 
 static struct clk_lookup common_clkregs[] = {
 	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 8b3d97e..c7373e7 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -78,9 +78,11 @@
 };
 
 static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
 
 static struct clk_lookup pxa320_clkregs[] = {
 	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static int __init pxa320_init(void)
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 7113174..0642920 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -176,13 +176,30 @@
 	MFP_ADDR_END,
 };
 
+static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
+	MFP_ADDR(GPIO159, 0x0524),
+	MFP_ADDR(GPIO163, 0x0534),
+	MFP_ADDR(GPIO167, 0x0544),
+	MFP_ADDR(GPIO168, 0x0548),
+	MFP_ADDR(GPIO169, 0x054c),
+	MFP_ADDR(GPIO170, 0x0550),
+	MFP_ADDR(GPIO171, 0x0554),
+	MFP_ADDR(GPIO172, 0x0558),
+	MFP_ADDR(GPIO173, 0x055c),
+
+	MFP_ADDR_END,
+};
+
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930()) {
+	if (cpu_is_pxa930() || cpu_is_pxa935()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
 
+	if (cpu_is_pxa935())
+		mfp_init_addr(pxa935_mfp_addr_map);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dda310f..ee8d603 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -24,6 +24,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -111,6 +112,26 @@
 	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
 	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
 
+	/* GPIO matrix keypad */
+	GPIO88_GPIO,	/* column 0 */
+	GPIO23_GPIO,	/* column 1 */
+	GPIO24_GPIO,	/* column 2 */
+	GPIO25_GPIO,	/* column 3 */
+	GPIO26_GPIO,	/* column 4 */
+	GPIO27_GPIO,	/* column 5 */
+	GPIO52_GPIO,	/* column 6 */
+	GPIO103_GPIO,	/* column 7 */
+	GPIO107_GPIO,	/* column 8 */
+	GPIO108_GPIO,	/* column 9 */
+	GPIO114_GPIO,	/* column 10 */
+	GPIO12_GPIO,	/* row 0 */
+	GPIO17_GPIO,	/* row 1 */
+	GPIO91_GPIO,	/* row 2 */
+	GPIO34_GPIO,	/* row 3 */
+	GPIO36_GPIO,	/* row 4 */
+	GPIO38_GPIO,	/* row 5 */
+	GPIO39_GPIO,	/* row 6 */
+
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
@@ -242,9 +263,115 @@
 /*
  * Spitz Keyboard Device
  */
+#define SPITZ_KEY_CALENDAR	KEY_F1
+#define SPITZ_KEY_ADDRESS	KEY_F2
+#define SPITZ_KEY_FN		KEY_F3
+#define SPITZ_KEY_CANCEL	KEY_F4
+#define SPITZ_KEY_EXOK		KEY_F5
+#define SPITZ_KEY_EXCANCEL	KEY_F6
+#define SPITZ_KEY_EXJOGDOWN	KEY_F7
+#define SPITZ_KEY_EXJOGUP	KEY_F8
+#define SPITZ_KEY_JAP1		KEY_LEFTALT
+#define SPITZ_KEY_JAP2		KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC		KEY_F9
+#define SPITZ_KEY_MAIL		KEY_F10
+#define SPITZ_KEY_OK		KEY_F11
+#define SPITZ_KEY_MENU		KEY_F12
+
+static const uint32_t spitzkbd_keymap[] = {
+	KEY(0, 0, KEY_LEFTCTRL),
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(0, 9, SPITZ_KEY_EXOK),	/* EXOK */
+	KEY(0, 10, SPITZ_KEY_EXCANCEL),	/* EXCANCEL */
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(1, 9, SPITZ_KEY_EXJOGDOWN),	/* EXJOGDOWN */
+	KEY(1, 10, SPITZ_KEY_EXJOGUP),	/* EXJOGUP */
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, SPITZ_KEY_ADDRESS),	/* ADDRESS */
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, SPITZ_KEY_CALENDAR),	/* CALENDAR */
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 9, KEY_LEFTSHIFT),
+	KEY(5, 0, SPITZ_KEY_MAIL),	/* MAIL */
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 10, SPITZ_KEY_FN),	/* FN */
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, SPITZ_KEY_JAP1),	/* JAP1 */
+	KEY(6, 2, SPITZ_KEY_JAP2),	/* JAP2 */
+	KEY(6, 3, SPITZ_KEY_CANCEL),	/* CANCEL */
+	KEY(6, 4, SPITZ_KEY_OK),	/* OK */
+	KEY(6, 5, SPITZ_KEY_MENU),	/* MENU */
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+};
+
+static const struct matrix_keymap_data spitzkbd_keymap_data = {
+	.keymap		= spitzkbd_keymap,
+	.keymap_size	= ARRAY_SIZE(spitzkbd_keymap),
+};
+
+static const uint32_t spitzkbd_row_gpios[] =
+		{ 12, 17, 91, 34, 36, 38, 39 };
+static const uint32_t spitzkbd_col_gpios[] =
+		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
+
+static struct matrix_keypad_platform_data spitzkbd_pdata = {
+	.keymap_data		= &spitzkbd_keymap_data,
+	.row_gpios		= spitzkbd_row_gpios,
+	.col_gpios		= spitzkbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(spitzkbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(spitzkbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device spitzkbd_device = {
-	.name		= "spitz-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &spitzkbd_pdata,
+	},
 };
 
 
@@ -296,6 +423,7 @@
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
+	.pressure_max		= 1024,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
@@ -378,45 +506,6 @@
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-
-static struct pxamci_platform_data spitz_mci_platform_data;
-
-static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
-	gpio_direction_input(SPITZ_GPIO_nSD_WP);
-
-	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			  IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_2;
-	}
-	return 0;
-
-err_free_2:
-	gpio_free(SPITZ_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
@@ -427,24 +516,12 @@
 		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
 }
 
-static int spitz_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(SPITZ_GPIO_nSD_WP);
-}
-
-static void spitz_mci_exit(struct device *dev, void *data)
-{
-	free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(SPITZ_GPIO_nSD_WP);
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data spitz_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= spitz_mci_init,
-	.get_ro		= spitz_mci_get_ro,
-	.setpower 	= spitz_mci_setpower,
-	.exit		= spitz_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 		= spitz_mci_setpower,
+	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
@@ -484,50 +561,10 @@
 /*
  * Irda
  */
-static int spitz_irda_startup(struct device *dev)
-{
-	int rc;
-
-	rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
-	if (rc)
-		goto err;
-
-	rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
-	if (rc)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(SPITZ_GPIO_IR_ON);
-err:
-	return rc;
-}
-
-static void spitz_irda_shutdown(struct device *dev)
-{
-	gpio_free(SPITZ_GPIO_IR_ON);
-}
-
-static void spitz_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-#ifdef CONFIG_MACH_AKITA
-static void akita_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-#endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
+/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= spitz_irda_transceiver_mode,
-	.startup		= spitz_irda_startup,
-	.shutdown		= spitz_irda_shutdown,
 };
 
 
@@ -695,6 +732,7 @@
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
@@ -705,6 +743,8 @@
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
+	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+
 	platform_scoop_config = &spitz_pcmcia_config;
 
 	common_init();
@@ -747,7 +787,7 @@
 
 static void __init akita_init(void)
 {
-	spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
 
 	sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
 	sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 117ad59..e81a526 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -247,49 +247,10 @@
 /*
  * MMC/SD Device
  */
-static struct pxamci_platform_data tosa_mci_platform_data;
-
 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
 {
 	int err;
 
-	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
-		goto err_gpio_detect;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
-	if (err)
-		goto err_gpio_detect_dir;
-
-	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				"MMC/SD card detect", data);
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		goto err_irq;
-	}
-
-	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
-		goto err_gpio_wp;
-	}
-	err = gpio_direction_input(TOSA_GPIO_SD_WP);
-	if (err)
-		goto err_gpio_wp_dir;
-
-	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_pwr;
-	}
-	err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
-	if (err)
-		goto err_gpio_pwr_dir;
-
 	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
@@ -304,51 +265,21 @@
 err_gpio_int_dir:
 	gpio_free(TOSA_GPIO_nSD_INT);
 err_gpio_int:
-err_gpio_pwr_dir:
-	gpio_free(TOSA_GPIO_PWR_ON);
-err_gpio_pwr:
-err_gpio_wp_dir:
-	gpio_free(TOSA_GPIO_SD_WP);
-err_gpio_wp:
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-err_irq:
-err_gpio_detect_dir:
-	gpio_free(TOSA_GPIO_nSD_DETECT);
-err_gpio_detect:
 	return err;
 }
 
-static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 1);
-	} else {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 0);
-	}
-}
-
-static int tosa_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(TOSA_GPIO_SD_WP);
-}
-
 static void tosa_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(TOSA_GPIO_nSD_INT);
-	gpio_free(TOSA_GPIO_PWR_ON);
-	gpio_free(TOSA_GPIO_SD_WP);
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
-	.ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           = tosa_mci_init,
-	.get_ro		= tosa_mci_get_ro,
-	.setpower       = tosa_mci_setpower,
-	.exit           = tosa_mci_exit,
+	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init           	= tosa_mci_init,
+	.exit           	= tosa_mci_exit,
+	.gpio_card_detect	= TOSA_GPIO_nSD_DETECT,
+	.gpio_card_ro		= TOSA_GPIO_SD_WP,
+	.gpio_power		= TOSA_GPIO_PWR_ON,
 };
 
 /*
@@ -406,10 +337,11 @@
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = tosa_irda_transceiver_mode,
-	.startup = tosa_irda_startup,
-	.shutdown = tosa_irda_shutdown,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= tosa_irda_transceiver_mode,
+	.startup		= tosa_irda_startup,
+	.shutdown		= tosa_irda_shutdown,
 };
 
 /*
@@ -910,6 +842,7 @@
 	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
+	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 753ec4d..fe08507 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -153,87 +153,11 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int treo680_mci_init(struct device *dev,
-		irq_handler_t treo680_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
-
-	if (err)
-		goto err;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
-	if (err)
-		goto err2;
-
-	err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
-			treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-
-	if (err) {
-		dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
-			     __func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
-	if (err)
-		goto err5;
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void treo680_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-}
-
-static void treo680_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int treo680_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
-}
-
 static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= treo680_mci_power,
-	.get_ro		= treo680_mci_get_ro,
-	.init 		= treo680_mci_init,
-	.exit		= treo680_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO680_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
+	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
 };
 
 /******************************************************************************
@@ -330,16 +254,9 @@
 	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
 	if (ret)
 		goto err2;
-	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
-	if (ret)
-		goto err3;
 
 	return 0;
-err3:
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
+
 err2:
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
 err:
@@ -355,7 +272,6 @@
 static void treo680_backlight_exit(struct device *dev)
 {
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
 }
 
 static struct platform_pwm_backlight_data treo680_backlight_data = {
@@ -379,44 +295,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static void treo680_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int treo680_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
-	if (err)
-		goto err1;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
-	if (err)
-		goto err2;
-
-	return 0;
-
-err2:
-	dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-err1:
-	dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
-	return err;
-}
-
-static void treo680_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-}
-
 static struct pxaficp_platform_data treo680_ficp_info = {
-	.transceiver_cap  = IR_FIRMODE | IR_SIRMODE | IR_OFF,
-	.startup          = treo680_irda_startup,
-	.shutdown         = treo680_irda_shutdown,
-	.transceiver_mode = treo680_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_TREO680_IR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
@@ -546,6 +427,11 @@
 },
 };
 
+static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+}
+
 static struct pxafb_mach_info treo680_lcd_screen = {
 	.modes		= treo680_lcd_modes,
 	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
@@ -585,11 +471,32 @@
 	}
 }
 
+static void __init treo680_lcd_power_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+	if (ret) {
+		pr_err("Treo680: LCD power GPIO request failed!\n");
+		return;
+	}
+
+	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+	if (ret) {
+		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+		gpio_free(GPIO_NR_TREO680_LCD_POWER);
+		return;
+	}
+
+	treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+}
+
 static void __init treo680_init(void)
 {
 	treo680_pm_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
 	pxa_set_keypad_info(&treo680_keypad_platform_data);
+	treo680_lcd_power_init();
 	set_pxa_fb_info(&treo680_lcd_screen);
 	pxa_set_mci_info(&treo680_mci_platform_data);
 	treo680_udc_init();
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 825f540..3981e03 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -367,6 +367,9 @@
 	.exit		= trizeps4_mci_exit,
 	.get_ro		= NULL,	/* write-protection not supported */
 	.setpower 	= NULL,	/* power-switching not supported */
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 /****************************************************************************
@@ -412,6 +415,7 @@
 }
 
 static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.gpio_pwdown		= -1,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= trizeps4_irda_transceiver_mode,
 	.startup		= trizeps4_irda_startup,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
new file mode 100644
index 0000000..3fd79cb
--- /dev/null
+++ b/arch/arm/mach-pxa/xcep.c
@@ -0,0 +1,187 @@
+/*  linux/arch/arm/mach-pxa/xcep.c
+ *
+ *  Support for the Iskratel Electronics XCEP platform as used in
+ *  the Libera instruments from Instrumentation Technologies.
+ *
+ *  Author:     Ales Bardorfer <ales@i-tech.si>
+ *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
+ *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
+ *  Created:    June 2006
+ *  Copyright:  (C) 2006-2009 Instrumentation Technologies
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#include "generic.h"
+
+#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
+#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
+#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
+#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
+#define XCEP_ETH_IRQ		IRQ_GPIO0
+
+/*  XCEP CPLD base */
+#define XCEP_CPLD_BASE		0xf0000000
+
+
+/* Flash partitions. */
+
+static struct mtd_partition xcep_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Bootloader ENV",
+		.size =		0x00040000,
+		.offset =	0x00040000,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00080000,
+	}, {
+		.name =		"Rescue fs",
+		.size =		0x00280000,
+		.offset =	0x00180000,
+	}, {
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00400000
+	}
+};
+
+static struct physmap_flash_data xcep_flash_data[] = {
+	{
+		.width		= 4,		/* bankwidth in bytes */
+		.parts		= xcep_partitions,
+		.nr_parts	= ARRAY_SIZE(xcep_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = xcep_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/* SMC LAN91C111 network controller. */
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= XCEP_ETH_PHYS,
+		.end	= XCEP_ETH_PHYS_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= XCEP_ETH_IRQ,
+		.end	= XCEP_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= "smc91x-attrib",
+		.start	= XCEP_ETH_ATTR,
+		.end	= XCEP_ETH_ATTR_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata xcep_smc91x_info = {
+	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &xcep_smc91x_info,
+	},
+};
+
+
+static struct platform_device *devices[] __initdata = {
+	&flash_device,
+	&smc91x_device,
+};
+
+
+/* We have to state that there are HWMON devices on the I2C bus on XCEP.
+ * Drivers for HWMON verify capabilities of the adapter when loading and
+ * refuse to attach if the adapter doesn't support HWMON class of devices.
+ * See also Documentation/i2c/porting-clients. */
+static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
+	.class = I2C_CLASS_HWMON
+};
+
+
+static mfp_cfg_t xcep_pin_config[] __initdata = {
+	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
+	GPIO80_nCS_4,	/* CPLD chip select. */
+	/* SSP communication to MSP430 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO27_SSP1_EXTCLK
+};
+
+static void __init xcep_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+
+	/* See Intel XScale Developer's Guide for details */
+	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
+	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
+	MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+	pxa_set_i2c_info(&xcep_i2c_platform_data);
+}
+
+MACHINE_START(XCEP, "Iskratel XCEP")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= xcep_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 218d200..09784d3 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -290,6 +290,9 @@
 	.init 		= zylonite_mci_init,
 	.exit		= zylonite_mci_exit,
 	.get_ro		= zylonite_mci_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index dc3519c..a2083b6 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,6 +30,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
+#include <linux/amba/mmci.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
@@ -44,7 +45,6 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <asm/hardware/gic.h>
 
@@ -237,14 +237,14 @@
 	return readl(REALVIEW_SYSMCI) & mask;
 }
 
-struct mmc_platform_data realview_mmc0_plat_data = {
+struct mmci_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 17,
 	.gpio_cd	= 16,
 };
 
-struct mmc_platform_data realview_mmc1_plat_data = {
+struct mmci_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 19,
@@ -296,31 +296,31 @@
 
 static struct clk_lookup lookups[] = {
 	{	/* UART0 */
-		.dev_id		= "dev:f1",
+		.dev_id		= "dev:uart0",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
+		.dev_id		= "dev:uart1",
 		.clk		= &ref24_clk,
 	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
+		.dev_id		= "dev:uart2",
 		.clk		= &ref24_clk,
 	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
+		.dev_id		= "fpga:uart3",
 		.clk		= &ref24_clk,
 	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
+		.dev_id		= "fpga:kmi0",
 		.clk		= &ref24_clk,
 	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
+		.dev_id		= "fpga:kmi1",
 		.clk		= &ref24_clk,
 	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
+		.dev_id		= "fpga:mmc0",
 		.clk		= &ref24_clk,
 	}, {	/* EB:CLCD */
-		.dev_id		= "dev:20",
+		.dev_id		= "dev:clcd",
 		.clk		= &oscvco_clk,
 	}, {	/* PB:CLCD */
-		.dev_id		= "issp:20",
+		.dev_id		= "issp:clcd",
 		.clk		= &oscvco_clk,
 	}
 };
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 59a337b..46cd6ac 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -47,8 +47,8 @@
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
-extern struct mmc_platform_data realview_mmc0_plat_data;
-extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct mmci_platform_data realview_mmc0_plat_data;
+extern struct mmci_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *timer0_va_base;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index abd13b4..1d65e64 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-eb.h>
@@ -193,27 +193,27 @@
 #define EB_SSP_DMA	{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
+AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
+AMBA_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
+AMBA_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  EB_SMC,   NULL);
-AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
-AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2",  EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3",  EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  EB_SSP,   NULL);
+AMBA_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
+AMBA_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
+AMBA_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
+AMBA_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
+AMBA_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
+AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
+AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 17fbb0e..2817fe0 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb1176.h>
@@ -170,29 +170,29 @@
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB1176_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB1176_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB1176_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:30",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
+//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 //	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index fdd042b..94680fc 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -38,7 +39,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb11mp.h>
@@ -172,29 +172,29 @@
 #define PB11MP_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB11MP_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB11MP_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB11MP_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB11MP_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB11MP_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 70bba99..941beb2 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
@@ -162,29 +162,29 @@
 #define PBA8_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBA8_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBA8_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBA8_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBA8_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBA8_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ce6c5d2..7e4bc6c 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
@@ -182,29 +182,29 @@
 #define PBX_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index d8c023d..3d4e9da 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -77,6 +77,7 @@
 	select CPU_S3C2410
 	select PM_H1940 if PM
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -89,6 +90,7 @@
 	bool "Acer N30 family"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -103,6 +105,7 @@
 	select S3C24XX_DCLK
 	select ISA
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -111,6 +114,7 @@
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -154,6 +158,7 @@
 	bool "QT2410"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 35c1bde..c2bdc46 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -48,6 +48,7 @@
 	bool "Logitech Jive"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -61,6 +62,7 @@
 	select MACH_S3C2413
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -84,6 +86,7 @@
 	bool "VMSTMS"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8ae1b28..d7bba91 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -48,6 +48,7 @@
 	select S3C2440_XTAL_12000000
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -57,6 +58,7 @@
 	select CPU_S3C2440
 	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
 
@@ -66,6 +68,7 @@
 	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the SMDK2440.
 
@@ -74,6 +77,7 @@
  	select CPU_S3C2440
 	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -88,6 +92,7 @@
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
@@ -97,6 +102,7 @@
 	select EEPROM_AT24
 	select LEDS_TRIGGER_BACKLIGHT
 	select SND_S3C24XX_SOC_S3C24XX_UDA134X
+	select S3C_DEV_NAND
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index f5af212..770b720 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -26,6 +26,7 @@
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
 	select S3C6400_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index f9d0f09..53fc3ff 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -102,6 +102,7 @@
 	bool "Airgoo HMT"
 	select CPU_S3C6410
 	select S3C_DEV_FB
+	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	select S3C64XX_SETUP_FB_24BPP
 	select HAVE_PWM
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 95f9c5a..cb4521a 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -39,7 +39,7 @@
 
 static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
 
-static spinlock_t dma_list_lock;
+static DEFINE_SPINLOCK(dma_list_lock);
 
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 337b9aa..801b21e 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -81,6 +81,18 @@
 		Memory Interface) from both from access and application
 		side.
 
+config MACH_U300_SPIDUMMY
+	bool "SSP/SPI dummy chip"
+	select SPI
+	select SPI_MASTER
+	select SPI_PL022
+	help
+		This creates a small kernel module that creates a dummy
+		SPI device to be used for loopback tests. Regularly used
+		to test reference designs. If you're not testing SPI,
+		you don't need it. Selecting this will activate the
+		SPI framework and ARM PL022 support.
+
 comment "All the settings below must match the bootloader's settings"
 
 config MACH_U300_ACCESS_MEM_SIZE
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 24950e0..885b5c0 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -9,3 +9,6 @@
 
 obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_MMC)                 += mmc.o
+obj-$(CONFIG_SPI_PL022)           += spi.o
+obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
+obj-$(CONFIG_I2C_STU300)          += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 2e9b8cc..be60d6d 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -32,6 +32,8 @@
 
 #include "clock.h"
 #include "mmc.h"
+#include "spi.h"
+#include "i2c.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -378,14 +380,14 @@
 };
 
 static struct platform_device i2c0_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(i2c0_resources),
 	.resource = i2c0_resources,
 };
 
 static struct platform_device i2c1_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(i2c1_resources),
 	.resource = i2c1_resources,
@@ -611,6 +613,8 @@
 	/* Wait for the PLL208 to lock if not locked in yet */
 	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
 		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+	/* Initialize SPI device with some board specifics */
+	u300_spi_init(&pl022_device);
 
 	/* Register the AMBA devices in the AMBA bus abstraction layer */
 	u300_clock_primecells();
@@ -622,6 +626,12 @@
 
 	u300_assign_physmem();
 
+	/* Register subdevices on the I2C buses */
+	u300_i2c_register_board_devices();
+
+	/* Register subdevices on the SPI bus */
+	u300_spi_register_board_devices();
+
 	/* Register the platform devices */
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
new file mode 100644
index 0000000..962f9de
--- /dev/null
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -0,0 +1,290 @@
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+	struct device *dev;
+	struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	/*
+	 * WARNING! Do not dereference the chip-specific data in any normal
+	 * driver for a chip. It is usually STATIC and shall not be read
+	 * or written to. Your chip driver should NOT depend on fields in this
+	 * struct, this is just used here to alter the behaviour of the chip
+	 * in order to perform tests.
+	 */
+	struct pl022_config_chip *chip_info = spi->controller_data;
+	int status;
+	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+			0xF0, 0x0D};
+	u8 rxbuf[14];
+	u8 *bigtxbuf_virtual;
+	u8 *bigrxbuf_virtual;
+
+	if (mutex_lock_interruptible(&p_dummy->lock))
+		return -ERESTARTSYS;
+
+	bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+	if (bigtxbuf_virtual == NULL) {
+		status = -ENOMEM;
+		goto out;
+	}
+	bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+	/* Fill TXBUF with some happy pattern */
+	memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+	/*
+	 * Force chip to 8 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_8;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	/* Now run the tests for 8bit mode */
+	pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+		"in 8bit mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status < 0)
+		pr_warning("Siple test 1: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 1: SUCCESS!\n");
+
+	pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+		"in 8bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 2: SUCCESS!\n");
+
+	pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+		"in 8bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 3: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 3: SUCCESS!\n");
+
+	pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+		"bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+	pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+		"14 bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5: SUCCESS!\n");
+
+	pr_info("Simple test 6: write %d bytes with spi_write(), "
+		"read %d bytes garbage with spi_read() in 8bit mode\n",
+		DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6 step 1: SUCCESS!\n");
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6: SUCCESS!\n");
+
+
+	/*
+	 * Force chip to 16 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_16;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+		"in 16bit bus mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status == -EIO)
+		pr_info("Simple test 7: SUCCESS! (expected failure with "
+			"status EIO)\n");
+	else if (status < 0)
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "succeeded but it was expected to fail!\n");
+
+	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+		"in 16bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 8: SUCCESS!\n");
+
+	pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+		"in 16bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 9: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 9: SUCCESS!\n");
+
+	pr_info("Simple test 10: write %d bytes with spi_write(), "
+	       "read %d bytes garbage with spi_read() in 16bit mode\n",
+	       DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10: SUCCESS!\n");
+
+	status = sprintf(buf, "loop test complete\n");
+	kfree(bigrxbuf_virtual);
+	kfree(bigtxbuf_virtual);
+ out:
+	mutex_unlock(&p_dummy->lock);
+	return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int __devinit pl022_dummy_probe(struct spi_device *spi)
+{
+	struct dummy *p_dummy;
+	int status;
+
+	dev_info(&spi->dev, "probing dummy SPI device\n");
+
+	p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+	if (!p_dummy)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, p_dummy);
+	mutex_init(&p_dummy->lock);
+
+	/* sysfs hook */
+	status = device_create_file(&spi->dev, &dev_attr_looptest);
+	if (status) {
+		dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+		goto out_dev_create_looptest_failed;
+	}
+
+	return 0;
+
+out_dev_create_looptest_failed:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+	return status;
+}
+
+static int __devexit pl022_dummy_remove(struct spi_device *spi)
+{
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	dev_info(&spi->dev, "removing dummy SPI device\n");
+	device_remove_file(&spi->dev, &dev_attr_looptest);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+
+	return 0;
+}
+
+static struct spi_driver pl022_dummy_driver = {
+	.driver = {
+		.name	= "spi-dummy",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= pl022_dummy_probe,
+	.remove	= __devexit_p(pl022_dummy_remove),
+};
+
+static int __init pl022_init_dummy(void)
+{
+	return spi_register_driver(&pl022_dummy_driver);
+}
+
+static void __exit pl022_exit_dummy(void)
+{
+	spi_unregister_driver(&pl022_dummy_driver);
+}
+
+module_init(pl022_init_dummy);
+module_exit(pl022_exit_dummy);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 308cdb1..63c8f27 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -25,11 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-/* Need access to SYSCON registers for PADmuxing */
-#include <mach/syscon.h>
-
-#include "padmux.h"
-
 /* Reference to GPIO block clock */
 static struct clk *clk;
 
@@ -606,14 +601,6 @@
 	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
 #endif
 
-	/* Set up some padmuxing here */
-#ifdef CONFIG_MMC
-	pmx_set_mission_mode_mmc();
-#endif
-#ifdef CONFIG_SPI_PL022
-	pmx_set_mission_mode_spi();
-#endif
-
 	gpio_set_initial_values();
 
 	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
new file mode 100644
index 0000000..10be1f8
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.c
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-u300/i2c.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <mach/irqs.h>
+
+static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+	{
+		.type = "ab3100",
+		.addr = 0x48,
+		.irq = IRQ_U300_IRQ0_EXT,
+	},
+};
+
+static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.type = "fwcam",
+		.addr = 0x10,
+	},
+	{
+		.type = "fwcam",
+		.addr = 0x5d,
+	},
+#else
+	{ },
+#endif
+};
+
+void __init u300_i2c_register_board_devices(void)
+{
+	i2c_register_board_info(0, bus0_i2c_board_info,
+				ARRAY_SIZE(bus0_i2c_board_info));
+	i2c_register_board_info(1, bus1_i2c_board_info,
+				ARRAY_SIZE(bus1_i2c_board_info));
+}
diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h
new file mode 100644
index 0000000..485c02e
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-u300/i2c.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef MACH_U300_I2C_H
+#define MACH_U300_I2C_H
+
+#ifdef CONFIG_I2C_STU300
+void __init u300_i2c_register_board_devices(void);
+#else
+/* Compile out this stuff if no I2C adapter is available */
+static inline void __init u300_i2c_register_board_devices(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index bf134bc..ab000df 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -35,6 +35,14 @@
 #endif
 
 /*
+ * TCM memory whereabouts
+ */
+#define ITCM_OFFSET	0xffff2000
+#define ITCM_END	0xffff3fff
+#define DTCM_OFFSET	0xffff4000
+#define DTCM_END	0xffff5fff
+
+/*
  * We enable a real big DMA buffer if need be.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 1c90d1b..7444f5c 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -240,8 +240,13 @@
 #define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
 #define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
 #define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_PMC1LR_CDI_CDI2				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO			(0xC000)
+#elif CONFIG_MACH_U300_BS365
 #define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
 #define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#endif
 #define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
 #define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
 #define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
@@ -345,19 +350,69 @@
 #define U300_SYSCON_MMCR_MASK					(0x0003)
 #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
 #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-
+/* Pull up/down control (R/W) */
+#define U300_SYSCON_PUCR					(0x104)
+#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE		(0x0200)
+#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE		(0x0100)
+#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE			(0x0080)
+#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE			(0x0040)
+#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK			(0x003F)
+/* Padmux 2 control */
+#define U300_SYSCON_PMC2R					(0x100)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MASK			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM			(0x0040)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MMC			(0x0080)
+#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MASK			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM			(0x0100)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MMC			(0x0200)
+#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MASK			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM			(0x0400)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MMC			(0x0800)
+#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MASK			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM			(0x1000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MMC			(0x2000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MASK			(0xC000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM			(0x4000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MMC			(0x8000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO			(0xC000)
 /* TODO: More SYSCON registers missing */
 #define U300_SYSCON_PMC3R					(0x10c)
 #define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
 #define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
-/* TODO: Missing other configs, I just added the SPI stuff */
-
+/* TODO: Missing other configs */
+#define U300_SYSCON_PMC4R					(0x168)
+#define U300_SYSCON_PMC4R_APP_MISC_12_MASK			(0x0003)
+#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_MASK			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_13_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA			(0x0004)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2			(0x0008)
+#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_14_MASK			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA			(0x0010)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2			(0x0020)
+#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_16_MASK			(0x0300)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13		(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS		(0x0100)
+#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N	(0x0200)
 /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
 #define U300_SYSCON_S0CCR					(0x120)
 #define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -375,6 +430,7 @@
 #define U300_SYSCON_S1CCR					(0x124)
 #define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -393,6 +449,7 @@
 #define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
 #define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
 #define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -425,6 +482,44 @@
 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
 #define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
 #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR					(0x0130)
+#define U300_SYSCON_PICR_MASK					(0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR					(0x0134)
+#define U300_SYSCON_PISR_MASK					(0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR					(0x0138)
+#define U300_SYSCON_PICLR_MASK					(0x000F)
+#define U300_SYSCON_PICLR_RWMASK				(0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
+/* CAMIF_CONTROL 16 bit (-/W) */
+#define U300_SYSCON_CICR					(0x013C)
+#define U300_SYSCON_CICR_MASK					(0x0FFF)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK		(0x0F00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1		(0x0C00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0		(0x0300)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK		(0x00F0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1		(0x00C0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0		(0x0030)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK		(0x000F)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1		(0x000C)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0		(0x0003)
 /* Clock activity observability register 0 */
 #define U300_SYSCON_C0OAR					(0x140)
 #define U300_SYSCON_C0OAR_MASK					(0xFFFF)
@@ -513,7 +608,7 @@
 /**
  * CPU medium frequency in MHz
  */
-#define SYSCON_CPU_CLOCK_MEDIUM  104
+#define SYSCON_CPU_CLOCK_MEDIUM   52
 /**
  * CPU low frequency in MHz
  */
@@ -527,7 +622,7 @@
 /**
  * EMIF medium frequency in MHz
  */
-#define SYSCON_EMIF_CLOCK_MEDIUM 104
+#define SYSCON_EMIF_CLOCK_MEDIUM  52
 /**
  * EMIF low frequency in MHz
  */
@@ -541,7 +636,7 @@
 /**
  * AHB medium frequency in MHz
  */
-#define SYSCON_AHB_CLOCK_MEDIUM   52
+#define SYSCON_AHB_CLOCK_MEDIUM   26
 /**
  * AHB low frequency in MHz
  */
@@ -553,6 +648,15 @@
   SYSCON_BM_VIDEO_ENC
 };
 
+/* Selectr a resistor or a set of resistors */
+enum syscon_pull_up_down {
+  SYSCON_PU_KEY_IN_EN,
+  SYSCON_PU_EMIF_1_8_BIT_EN,
+  SYSCON_PU_EMIF_1_16_BIT_EN,
+  SYSCON_PU_EMIF_1_NFIF_READY_EN,
+  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
+};
+
 /*
  * Note that this array must match the order of the array "clk_reg"
  * in syscon.c
@@ -575,6 +679,7 @@
   SYSCON_CLKCONTROL_SPI,
   SYSCON_CLKCONTROL_I2S0_CORE,
   SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_UART1,
   SYSCON_CLKCONTROL_AAIF,
   SYSCON_CLKCONTROL_AHB,
   SYSCON_CLKCONTROL_APEX,
@@ -604,7 +709,8 @@
 
 enum syscon_sysclk_req {
   SYSCON_SYSCLKREQ_DISABLED,
-  SYSCON_SYSCLKREQ_ACTIVE_LOW
+  SYSCON_SYSCLKREQ_ACTIVE_LOW,
+  SYSCON_SYSCLKREQ_MONITOR
 };
 
 enum syscon_clk_mode {
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 585cc01..7b6b016 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -19,15 +19,16 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/amba/mmci.h>
 
-#include <asm/mach/mmc.h>
 #include "mmc.h"
+#include "padmux.h"
 
 struct mmci_card_event {
 	struct input_dev *mmc_input;
 	int mmc_inserted;
 	struct work_struct workq;
-	struct mmc_platform_data mmc0_plat_data;
+	struct mmci_platform_data mmc0_plat_data;
 };
 
 static unsigned int mmc_status(struct device *dev)
@@ -146,6 +147,7 @@
 {
 	struct mmci_card_event *mmci_card;
 	struct device *mmcsd_device = &adev->dev;
+	struct pmx *pmx;
 	int ret = 0;
 
 	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
@@ -158,6 +160,8 @@
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
+	mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
+		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
@@ -207,6 +211,20 @@
 
 	input_set_drvdata(mmci_card->mmc_input, mmci_card);
 
+	/*
+	 * Setup padmuxing for MMC. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
+
+	if (IS_ERR(pmx))
+		pr_warning("Could not get padmux handle\n");
+	else {
+		ret = pmx_activate(mmcsd_device, pmx);
+		if (IS_ERR_VALUE(ret))
+			pr_warning("Could not activate padmuxing\n");
+	}
+
 	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
 				     mmci_card);
 
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
index f366456..4c93c6c 100644
--- a/arch/arm/mach-u300/padmux.c
+++ b/arch/arm/mach-u300/padmux.c
@@ -6,53 +6,362 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
-#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <mach/u300-regs.h>
 #include <mach/syscon.h>
-
 #include "padmux.h"
 
-/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
-void pmx_set_mission_mode_mmc(void)
-{
-	u16 val;
+static DEFINE_MUTEX(pmx_mutex);
 
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+const u32 pmx_registers[] = {
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
+};
+
+/* High level functionality */
+
+/* Lazy dog:
+ * onmask = {
+ *   {"PMC1LR" mask, "PMC1LR" value},
+ *   {"PMC1HR" mask, "PMC1HR" value},
+ *   {"PMC2R"  mask, "PMC2R"  value},
+ *   {"PMC3R"  mask, "PMC3R"  value},
+ *   {"PMC4R"  mask, "PMC4R"  value}
+ * }
+ */
+static struct pmx mmc_setting = {
+	.setting = U300_APP_PMX_MMC_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "MMC",
+	.onmask = {
+		   {U300_SYSCON_PMC1LR_MMCSD_MASK,
+		    U300_SYSCON_PMC1LR_MMCSD_MMCSD},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0},
+		   {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
+		    U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
+		   },
+};
+
+static struct pmx spi_setting = {
+	.setting = U300_APP_PMX_SPI_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "SPI",
+	.onmask = {{0, 0},
+		   {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
+		    U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0}
+		   },
+};
+
+/* Available padmux settings */
+static struct pmx *pmx_settings[] = {
+	&mmc_setting,
+	&spi_setting,
+};
+
+static void update_registers(struct pmx *pmx, bool activate)
+{
+	u16 regval, val, mask;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
+		if (activate)
+			val = pmx->onmask[i].val;
+		else
+			val = 0;
+
+		mask = pmx->onmask[i].mask;
+		if (mask != 0) {
+			regval = readw(pmx_registers[i]);
+			regval &= ~mask;
+			regval |= val;
+			writew(regval, pmx_registers[i]);
+		}
+	}
 }
 
-void pmx_set_mission_mode_spi(void)
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
 {
-	u16 val;
+	int i;
+	struct pmx *pmx = ERR_PTR(-ENOENT);
 
-	/* Set up padmuxing so the SPI port and its chipselects are active */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	/*
-	 * Activate the SPI port (disable the use of these pins for generic
-	 * GPIO, DSP, AAIF
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
-	/*
-	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
-	/*
-	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	if (dev == NULL)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (setting == pmx_settings[i]->setting) {
+
+			if (pmx_settings[i]->dev != NULL) {
+				WARN(1, "padmux: required setting "
+				     "in use by another consumer\n");
+			} else {
+				pmx = pmx_settings[i];
+				pmx->dev = dev;
+				dev_dbg(dev, "padmux: setting nr %d is now "
+					"bound to %s and ready to use\n",
+					setting, dev_name(dev));
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return pmx;
 }
+EXPORT_SYMBOL(pmx_get);
+
+int pmx_put(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot release handle as "
+					"it is bound to another consumer\n");
+				ret = -EINVAL;
+				break;
+			} else {
+				pmx_settings[i]->dev = NULL;
+				ret = 0;
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_put);
+
+int pmx_activate(struct device *dev, struct pmx *pmx)
+{
+	int i, j, ret;
+	ret = 0;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+
+	/* Make sure the required bits are not used */
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			if (pmx_settings[i]->onmask[j].mask & pmx->
+				onmask[j].mask) {
+				/* More than one entry on the same bits */
+				WARN(1, "padmux: cannot activate "
+					"setting. Bit conflict with "
+					"an active setting\n");
+
+				ret = -EUSERS;
+				goto exit;
+			}
+		}
+	}
+	update_registers(pmx, true);
+	pmx->activated = true;
+	dev_dbg(dev, "padmux: setting nr %d is activated\n",
+		pmx->setting);
+
+exit:
+	mutex_unlock(&pmx_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(pmx_activate);
+
+int pmx_deactivate(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL)
+			continue;
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot deactivate "
+				     "pmx setting as it was activated "
+				     "by another consumer\n");
+
+				ret = -EBUSY;
+				continue;
+			} else {
+				update_registers(pmx, false);
+				pmx_settings[i]->dev = NULL;
+				pmx->activated = false;
+				ret = 0;
+				dev_dbg(dev, "padmux: setting nr %d is deactivated",
+					pmx->setting);
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_deactivate);
+
+/*
+ * For internal use only. If it is to be exported,
+ * it should be reentrant. Notice that pmx_activate
+ * (i.e. runtime settings) always override default settings.
+ */
+static int pmx_set_default(void)
+{
+	/* Used to identify several entries on the same bits */
+	u16 modbits[ARRAY_SIZE(pmx_registers)];
+
+	int i, j;
+
+	memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
+
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (!pmx_settings[i]->default_on)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			/* Make sure there is only one entry on the same bits */
+			if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
+				BUG();
+				return -EUSERS;
+			}
+			modbits[j] |= pmx_settings[i]->onmask[j].mask;
+		}
+		update_registers(pmx_settings[i], true);
+	}
+	return 0;
+}
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+static int pmx_show(struct seq_file *s, void *data)
+{
+	int i;
+	seq_printf(s, "-------------------------------------------------\n");
+	seq_printf(s, "SETTING     BOUND TO DEVICE               STATE\n");
+	seq_printf(s, "-------------------------------------------------\n");
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+		/* Format pmx and device name nicely */
+		char cdp[33];
+		int chars;
+
+		chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
+		while (chars < 16) {
+			cdp[chars] = ' ';
+			chars++;
+		}
+		chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
+				dev_name(pmx_settings[i]->dev) : "N/A");
+		while (chars < 16) {
+			cdp[chars+16] = ' ';
+			chars++;
+		}
+		cdp[32] = '\0';
+
+		seq_printf(s,
+			"%s\t%s\n",
+			&cdp[0],
+			pmx_settings[i]->activated ?
+			"ACTIVATED" : "DEACTIVATED"
+			);
+
+	}
+	mutex_unlock(&pmx_mutex);
+	return 0;
+}
+
+static int pmx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmx_show, NULL);
+}
+
+static const struct file_operations pmx_operations = {
+	.owner		= THIS_MODULE,
+	.open		= pmx_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init init_pmx_read_debugfs(void)
+{
+	/* Expose a simple debugfs interface to view pmx settings */
+	(void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
+				   NULL, NULL,
+				   &pmx_operations);
+	return 0;
+}
+
+/*
+ * This needs to come in after the core_initcall(),
+ * because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_pmx_read_debugfs);
+#endif
+
+static int __init pmx_init(void)
+{
+	int ret;
+
+	ret = pmx_set_default();
+
+	if (IS_ERR_VALUE(ret))
+		pr_crit("padmux: default settings could not be set\n");
+
+	return 0;
+}
+
+/* Should be initialized before consumers */
+core_initcall(pmx_init);
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
index 8c2099a..6e8b860 100644
--- a/arch/arm/mach-u300/padmux.h
+++ b/arch/arm/mach-u300/padmux.h
@@ -6,14 +6,34 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX API
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
 
 #ifndef __MACH_U300_PADMUX_H
 #define __MACH_U300_PADMUX_H
 
-void pmx_set_mission_mode_mmc(void);
-void pmx_set_mission_mode_spi(void);
+enum pmx_settings {
+	U300_APP_PMX_MMC_SETTING,
+	U300_APP_PMX_SPI_SETTING
+};
+
+struct pmx_onmask {
+	u16 mask;		/* Mask bits */
+	u16 val;		/* Value when active */
+};
+
+struct pmx {
+	struct device *dev;
+	enum pmx_settings setting;
+	char *name;
+	bool activated;
+	bool default_on;
+	struct pmx_onmask onmask[];
+};
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
+int pmx_put(struct device *dev, struct pmx *pmx);
+int pmx_activate(struct device *dev, struct pmx *pmx);
+int pmx_deactivate(struct device *dev, struct pmx *pmx);
 
 #endif
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
new file mode 100644
index 0000000..f0e887b
--- /dev/null
+++ b/arch/arm/mach-u300/spi.c
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/mach-u300/spi.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/spi/spi.h>
+#include <linux/amba/pl022.h>
+#include <linux/err.h>
+#include "padmux.h"
+
+/*
+ * The following is for the actual devices on the SSP/SPI bus
+ */
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+static void select_dummy_chip(u32 chipselect)
+{
+	pr_debug("CORE: %s called with CS=0x%x (%s)\n",
+		 __func__,
+		 chipselect,
+		 chipselect ? "unselect chip" : "select chip");
+	/*
+	 * Here you would write the chip select value to the GPIO pins if
+	 * this was a real chip (but this is a loopback dummy).
+	 */
+}
+
+struct pl022_config_chip dummy_chip_info = {
+	/* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
+	.lbm = LOOPBACK_ENABLED,
+	/*
+	 * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
+	 * DMA_TRANSFER does not work
+	 */
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* We can only act as master but SSP_SLAVE is possible in theory */
+	.hierarchy = SSP_MASTER,
+	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
+	.slave_tx_disable = 0,
+	/* LSB first */
+	.endian_tx = SSP_TX_LSB,
+	.endian_rx = SSP_RX_LSB,
+	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_LOW,
+	.ctrl_len = SSP_BITS_12,
+	.wait_state = SSP_MWIRE_WAIT_ZERO,
+	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	/*
+	 * This is where you insert a call to a function to enable CS
+	 * (usually GPIO) for a certain chip.
+	 */
+	.cs_control = select_dummy_chip,
+};
+#endif
+
+static struct spi_board_info u300_spi_devices[] = {
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+	{
+		/* A dummy chip used for loopback tests */
+		.modalias       = "spi-dummy",
+		/* Really dummy, pass in additional chip config here */
+		.platform_data  = NULL,
+		/* This defines how the controller shall handle the device */
+		.controller_data = &dummy_chip_info,
+		/* .irq - no external IRQ routed from this device */
+		.max_speed_hz   = 1000000,
+		.bus_num        = 0, /* Only one bus on this chip */
+		.chip_select    = 0,
+		/* Means SPI_CS_HIGH, change if e.g low CS */
+		.mode           = 0,
+	},
+#endif
+};
+
+static struct pl022_ssp_controller ssp_platform_data = {
+	/* If you have several SPI buses this varies, we have only bus 0 */
+	.bus_id = 0,
+	/* Set this to 1 when we think we got DMA working */
+	.enable_dma = 0,
+	/*
+	 * On the APP CPU GPIO 4, 5 and 6 are connected as generic
+	 * chip selects for SPI. (Same on U330, U335 and U365.)
+	 * TODO: make sure the GPIO driver can select these properly
+	 * and do padmuxing accordingly too.
+	 */
+	.num_chipselect = 3,
+};
+
+
+void __init u300_spi_init(struct amba_device *adev)
+{
+	struct pmx *pmx;
+
+	adev->dev.platform_data = &ssp_platform_data;
+	/*
+	 * Setup padmuxing for SPI. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
+
+	if (IS_ERR(pmx))
+		dev_warn(&adev->dev, "Could not get padmux handle\n");
+	else {
+		int ret;
+
+		ret = pmx_activate(&adev->dev, pmx);
+		if (IS_ERR_VALUE(ret))
+			dev_warn(&adev->dev, "Could not activate padmuxing\n");
+	}
+
+}
+void __init u300_spi_register_board_devices(void)
+{
+	/* Register any SPI devices */
+	spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
+}
diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h
new file mode 100644
index 0000000..bd3d867
--- /dev/null
+++ b/arch/arm/mach-u300/spi.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-u300/spi.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef SPI_H
+#define SPI_H
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_SPI_PL022
+void __init u300_spi_init(struct amba_device *adev);
+void __init u300_spi_register_board_devices(void);
+#else
+/* Compile out SPI support if PL022 is not selected */
+static inline void __init u300_spi_init(struct amba_device *adev)
+{
+}
+static inline void __init u300_spi_register_board_devices(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index cce5320..26d26f5 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -346,6 +346,21 @@
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+unsigned long long notrace sched_clock(void)
+{
+	return clocksource_cyc2ns(clocksource_u300_1mhz.read(
+				  &clocksource_u300_1mhz),
+				  clocksource_u300_1mhz.mult,
+				  clocksource_u300_1mhz.shift);
+}
+
 
 /*
  * This sets up the system timers, clock source and clock event.
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 975eae4..e13be7c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -27,6 +27,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -47,7 +48,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 #include "clock.h"
@@ -369,7 +369,7 @@
 	return readl(VERSATILE_SYSMCI) & mask;
 }
 
-static struct mmc_platform_data mmc0_plat_data = {
+static struct mmci_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9af8d81..239cd30 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,7 +32,6 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 
@@ -41,7 +41,7 @@
 #define IRQ_MMCI1A	IRQ_SIC_MMCI1A
 #endif
 
-static struct mmc_platform_data mmc1_plat_data = {
+static struct mmci_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5fe595a..8d43e58 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -771,3 +771,8 @@
 	select OUTER_CACHE
 	help
 	  This option enables the L2 cache on XScale3.
+
+config ARM_L1_CACHE_SHIFT
+	int
+	default 6 if ARCH_OMAP3
+	default 5
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index cc8829d..379f785 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -25,6 +25,19 @@
 
 #include "fault.h"
 
+/*
+ * Fault status register encodings.  We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF		(1 << 31)
+#define FSR_WRITE		(1 << 11)
+#define FSR_FS4			(1 << 10)
+#define FSR_FS3_0		(15)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+
 #ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
@@ -182,18 +195,35 @@
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
-static int
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+	if (fsr & FSR_WRITE)
+		mask = VM_WRITE;
+	if (fsr & FSR_LNX_PF)
+		mask = VM_EXEC;
+
+	return vma->vm_flags & mask ? false : true;
+}
+
+static int __kprobes
 __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 		struct task_struct *tsk)
 {
 	struct vm_area_struct *vma;
-	int fault, mask;
+	int fault;
 
 	vma = find_vma(mm, addr);
 	fault = VM_FAULT_BADMAP;
-	if (!vma)
+	if (unlikely(!vma))
 		goto out;
-	if (vma->vm_start > addr)
+	if (unlikely(vma->vm_start > addr))
 		goto check_stack;
 
 	/*
@@ -201,47 +231,24 @@
 	 * memory access, so we can handle it.
 	 */
 good_area:
-	if (fsr & (1 << 11)) /* write? */
-		mask = VM_WRITE;
-	else
-		mask = VM_READ|VM_EXEC|VM_WRITE;
-
-	fault = VM_FAULT_BADACCESS;
-	if (!(vma->vm_flags & mask))
+	if (access_error(fsr, vma)) {
+		fault = VM_FAULT_BADACCESS;
 		goto out;
+	}
 
 	/*
-	 * If for any reason at all we couldn't handle
-	 * the fault, make sure we exit gracefully rather
-	 * than endlessly redo the fault.
+	 * If for any reason at all we couldn't handle the fault, make
+	 * sure we exit gracefully rather than endlessly redo the fault.
 	 */
-survive:
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			return fault;
-		BUG();
-	}
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
+	if (unlikely(fault & VM_FAULT_ERROR))
+		return fault;
 	if (fault & VM_FAULT_MAJOR)
 		tsk->maj_flt++;
 	else
 		tsk->min_flt++;
 	return fault;
 
-out_of_memory:
-	if (!is_global_init(tsk))
-		goto out;
-
-	/*
-	 * If we are out of memory for pid1, sleep for a while and retry
-	 */
-	up_read(&mm->mmap_sem);
-	yield();
-	down_read(&mm->mmap_sem);
-	goto survive;
-
 check_stack:
 	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
 		goto good_area;
@@ -278,6 +285,13 @@
 		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
 			goto no_context;
 		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in
+		 * which case, we'll have missed the might_sleep() from
+		 * down_read()
+		 */
+		might_sleep();
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);
@@ -289,6 +303,16 @@
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, call the OOM killer, and return to
+		 * userspace (which will retry the fault, or kill us if we
+		 * got oom-killed)
+		 */
+		pagefault_out_of_memory();
+		return 0;
+	}
+
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
@@ -296,16 +320,6 @@
 	if (!user_mode(regs))
 		goto no_context;
 
-	if (fault & VM_FAULT_OOM) {
-		/*
-		 * We ran out of memory, or some other thing
-		 * happened to us that made us unable to handle
-		 * the page fault gracefully.
-		 */
-		printk("VM: killing process %s\n", tsk->comm);
-		do_group_exit(SIGKILL);
-		return 0;
-	}
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to
@@ -489,10 +503,10 @@
 asmlinkage void __exception
 do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
 	struct siginfo info;
 
-	if (!inf->fn(addr, fsr, regs))
+	if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
 		return;
 
 	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
@@ -508,6 +522,6 @@
 asmlinkage void __exception
 do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
 {
-	do_translation_fault(addr, 0, regs);
+	do_translation_fault(addr, FSR_LNX_PF, regs);
 }
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index f982606..877c492 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -613,6 +613,14 @@
 
 void free_initmem(void)
 {
+#ifdef CONFIG_HAVE_TCM
+	extern char *__tcm_start, *__tcm_end;
+
+	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
+				    __phys_to_pfn(__pa(__tcm_end)),
+				    "TCM link");
+#endif
+
 	if (!machine_is_integrator() && !machine_is_cintegrator())
 		totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
 					    __phys_to_pfn(__pa(__init_end)),
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 693839c..71ebd7f 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -250,7 +250,7 @@
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 45ea3ae..d91b9be 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,6 +10,8 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
+#include <linux/input/matrix_keypad.h>
+
 struct omap_kp_platform_data {
 	int rows;
 	int cols;
@@ -35,9 +37,6 @@
 
 #define KEY_PERSISTENT		0x00800000
 #define KEYNUM_MASK		0x00EFFFFF
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
-						KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 98dfab6..0f49d2d 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -840,12 +840,14 @@
 	 */
 	AF26_34XX_GPIO0,
 	AF22_34XX_GPIO9,
+	AG9_34XX_GPIO23,
 	AH8_34XX_GPIO29,
 	U8_34XX_GPIO54_OUT,
 	U8_34XX_GPIO54_DOWN,
 	L8_34XX_GPIO63,
 	G25_34XX_GPIO86_OUT,
 	AG4_34XX_GPIO134_OUT,
+	AF4_34XX_GPIO135_OUT,
 	AE4_34XX_GPIO136_OUT,
 	AF6_34XX_GPIO140_UP,
 	AE6_34XX_GPIO141,
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 6fc52fc..57f7122 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -199,7 +199,8 @@
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, new->addr + total);
+	flush_cache_vmap((unsigned long)new->addr,
+				(unsigned long)(new->addr + total));
 	return new->addr;
 
 err_out:
@@ -390,7 +391,7 @@
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap(_va, va_end);
+	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 70aeee4..2975798 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -17,22 +17,266 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/memory.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
 
+#define DMA_DEBUG_NAME		"pxa_dma"
+#define DMA_MAX_REQUESTERS	64
+
 struct dma_channel {
 	char *name;
 	pxa_dma_prio prio;
 	void (*irq_handler)(int, void *);
 	void *data;
+	spinlock_t lock;
 };
 
 static struct dma_channel *dma_channels;
 static int num_dma_channels;
 
+/*
+ * Debug fs
+ */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
+
+static int dbg_show_requester_chan(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i;
+	u32 drcmr;
+
+	pos += seq_printf(s, "DMA channel %d requesters list :\n", chan);
+	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
+		drcmr = DRCMR(i);
+		if ((drcmr & DRCMR_CHLNUM) == chan)
+			pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
+					  !!(drcmr & DRCMR_MAPVLD));
+	}
+	return pos;
+}
+
+static inline int dbg_burst_from_dcmd(u32 dcmd)
+{
+	int burst = (dcmd >> 16) & 0x3;
+
+	return burst ? 4 << burst : 0;
+}
+
+static int is_phys_valid(unsigned long addr)
+{
+	return pfn_valid(__phys_to_pfn(addr));
+}
+
+#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
+#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
+
+static int dbg_show_descriptors(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i, max_show = 20, burst, width;
+	u32 dcmd;
+	unsigned long phys_desc;
+	struct pxa_dma_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_channels[chan].lock, flags);
+	phys_desc = DDADR(chan);
+
+	pos += seq_printf(s, "DMA channel %d descriptors :\n", chan);
+	pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0);
+	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
+		desc = phys_to_virt(phys_desc);
+		dcmd = desc->dcmd;
+		burst = dbg_burst_from_dcmd(dcmd);
+		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+		pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
+				  i, phys_desc, desc);
+		pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
+		pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
+		pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
+		pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d"
+				  " width=%d len=%d)\n",
+				  dcmd,
+				  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+				  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+				  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+				  DCMD_STR(ENDIAN), burst, width,
+				  dcmd & DCMD_LENGTH);
+		phys_desc = desc->ddadr;
+	}
+	if (i == max_show)
+		pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
+				  i, phys_desc);
+	else
+		pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n",
+				  i, phys_desc, phys_desc == DDADR_STOP ?
+				  "DDADR_STOP" : "invalid");
+
+	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
+	return pos;
+}
+
+static int dbg_show_chan_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	u32 dcsr, dcmd;
+	int burst, width;
+	static char *str_prio[] = { "high", "normal", "low" };
+
+	dcsr = DCSR(chan);
+	dcmd = DCMD(chan);
+	burst = dbg_burst_from_dcmd(dcmd);
+	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+	pos += seq_printf(s, "DMA channel %d\n", chan);
+	pos += seq_printf(s, "\tPriority : %s\n",
+			  str_prio[dma_channels[chan].prio]);
+	pos += seq_printf(s, "\tUnaligned transfer bit: %s\n",
+			  DALGN & (1 << chan) ? "yes" : "no");
+	pos += seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+			  dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
+			  DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
+			  DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
+			  DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
+			  DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
+			  DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
+			  DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
+
+	pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d"
+			  " len=%d)\n",
+			  dcmd,
+			  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+			  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+			  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+			  DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
+	pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
+	pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
+	pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
+	return pos;
+}
+
+static int dbg_show_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+
+	/* basic device status */
+	pos += seq_printf(s, "DMA engine status\n");
+	pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
+
+	return pos;
+}
+
+#define DBGFS_FUNC_DECL(name) \
+static int dbg_open_##name(struct inode *inode, struct file *file) \
+{ \
+	return single_open(file, dbg_show_##name, inode->i_private); \
+} \
+static const struct file_operations dbg_fops_##name = { \
+	.owner		= THIS_MODULE, \
+	.open		= dbg_open_##name, \
+	.llseek		= seq_lseek, \
+	.read		= seq_read, \
+	.release	= single_release, \
+}
+
+DBGFS_FUNC_DECL(state);
+DBGFS_FUNC_DECL(chan_state);
+DBGFS_FUNC_DECL(descriptors);
+DBGFS_FUNC_DECL(requester_chan);
+
+static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
+{
+	char chan_name[11];
+	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
+	struct dentry *chan_reqs = NULL;
+	void *dt;
+
+	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
+	chan = debugfs_create_dir(chan_name, chandir);
+	dt = (void *)ch;
+
+	if (chan)
+		chan_state = debugfs_create_file("state", 0400, chan, dt,
+						 &dbg_fops_chan_state);
+	if (chan_state)
+		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
+						 &dbg_fops_descriptors);
+	if (chan_descr)
+		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
+						&dbg_fops_requester_chan);
+	if (!chan_reqs)
+		goto err_state;
+
+	return chan;
+
+err_state:
+	debugfs_remove_recursive(chan);
+	return NULL;
+}
+
+static void pxa_dma_init_debugfs(void)
+{
+	int i;
+	struct dentry *chandir;
+
+	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
+	if (IS_ERR(dbgfs_root) || !dbgfs_root)
+		goto err_root;
+
+	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
+					  &dbg_fops_state);
+	if (!dbgfs_state)
+		goto err_state;
+
+	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
+			     GFP_KERNEL);
+	if (!dbgfs_state)
+		goto err_alloc;
+
+	chandir = debugfs_create_dir("channels", dbgfs_root);
+	if (!chandir)
+		goto err_chandir;
+
+	for (i = 0; i < num_dma_channels; i++) {
+		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
+		if (!dbgfs_chan[i])
+			goto err_chans;
+	}
+
+	return;
+err_chans:
+err_chandir:
+	kfree(dbgfs_chan);
+err_alloc:
+err_state:
+	debugfs_remove_recursive(dbgfs_root);
+err_root:
+	pr_err("pxa_dma: debugfs is not available\n");
+}
+
+static void __exit pxa_dma_cleanup_debugfs(void)
+{
+	debugfs_remove_recursive(dbgfs_root);
+}
+#else
+static inline void pxa_dma_init_debugfs(void) {}
+static inline void pxa_dma_cleanup_debugfs(void) {}
+#endif
+
 int pxa_request_dma (char *name, pxa_dma_prio prio,
 			void (*irq_handler)(int, void *),
 			void *data)
@@ -71,6 +315,7 @@
 	local_irq_restore(flags);
 	return i;
 }
+EXPORT_SYMBOL(pxa_request_dma);
 
 void pxa_free_dma (int dma_ch)
 {
@@ -88,24 +333,26 @@
 	dma_channels[dma_ch].name = NULL;
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(pxa_free_dma);
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
 	int i, dint = DINT;
+	struct dma_channel *channel;
 
-	for (i = 0; i < num_dma_channels; i++) {
-		if (dint & (1 << i)) {
-			struct dma_channel *channel = &dma_channels[i];
-			if (channel->name && channel->irq_handler) {
-				channel->irq_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
-				DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-			}
+	while (dint) {
+		i = __ffs(dint);
+		dint &= (dint - 1);
+		channel = &dma_channels[i];
+		if (channel->name && channel->irq_handler) {
+			channel->irq_handler(i, channel->data);
+		} else {
+			/*
+			 * IRQ for an unregistered DMA channel:
+			 * let's clear the interrupts and disable it.
+			 */
+			printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+			DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
 		}
 	}
 	return IRQ_HANDLED;
@@ -127,6 +374,7 @@
 	for (i = 0; i < num_ch; i++) {
 		DCSR(i) = 0;
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+		spin_lock_init(&dma_channels[i].lock);
 	}
 
 	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
@@ -135,10 +383,9 @@
 		kfree(dma_channels);
 		return ret;
 	}
-
 	num_dma_channels = num_ch;
+
+	pxa_dma_init_debugfs();
+
 	return 0;
 }
-
-EXPORT_SYMBOL(pxa_request_dma);
-EXPORT_SYMBOL(pxa_free_dma);
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 6401946..22086e6 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -150,6 +150,74 @@
 	MFP_PIN_GPIO125,
 	MFP_PIN_GPIO126,
 	MFP_PIN_GPIO127,
+
+	MFP_PIN_GPIO128,
+	MFP_PIN_GPIO129,
+	MFP_PIN_GPIO130,
+	MFP_PIN_GPIO131,
+	MFP_PIN_GPIO132,
+	MFP_PIN_GPIO133,
+	MFP_PIN_GPIO134,
+	MFP_PIN_GPIO135,
+	MFP_PIN_GPIO136,
+	MFP_PIN_GPIO137,
+	MFP_PIN_GPIO138,
+	MFP_PIN_GPIO139,
+	MFP_PIN_GPIO140,
+	MFP_PIN_GPIO141,
+	MFP_PIN_GPIO142,
+	MFP_PIN_GPIO143,
+	MFP_PIN_GPIO144,
+	MFP_PIN_GPIO145,
+	MFP_PIN_GPIO146,
+	MFP_PIN_GPIO147,
+	MFP_PIN_GPIO148,
+	MFP_PIN_GPIO149,
+	MFP_PIN_GPIO150,
+	MFP_PIN_GPIO151,
+	MFP_PIN_GPIO152,
+	MFP_PIN_GPIO153,
+	MFP_PIN_GPIO154,
+	MFP_PIN_GPIO155,
+	MFP_PIN_GPIO156,
+	MFP_PIN_GPIO157,
+	MFP_PIN_GPIO158,
+	MFP_PIN_GPIO159,
+	MFP_PIN_GPIO160,
+	MFP_PIN_GPIO161,
+	MFP_PIN_GPIO162,
+	MFP_PIN_GPIO163,
+	MFP_PIN_GPIO164,
+	MFP_PIN_GPIO165,
+	MFP_PIN_GPIO166,
+	MFP_PIN_GPIO167,
+	MFP_PIN_GPIO168,
+	MFP_PIN_GPIO169,
+	MFP_PIN_GPIO170,
+	MFP_PIN_GPIO171,
+	MFP_PIN_GPIO172,
+	MFP_PIN_GPIO173,
+	MFP_PIN_GPIO174,
+	MFP_PIN_GPIO175,
+	MFP_PIN_GPIO176,
+	MFP_PIN_GPIO177,
+	MFP_PIN_GPIO178,
+	MFP_PIN_GPIO179,
+	MFP_PIN_GPIO180,
+	MFP_PIN_GPIO181,
+	MFP_PIN_GPIO182,
+	MFP_PIN_GPIO183,
+	MFP_PIN_GPIO184,
+	MFP_PIN_GPIO185,
+	MFP_PIN_GPIO186,
+	MFP_PIN_GPIO187,
+	MFP_PIN_GPIO188,
+	MFP_PIN_GPIO189,
+	MFP_PIN_GPIO190,
+	MFP_PIN_GPIO191,
+
+	MFP_PIN_GPIO255 = 255,
+
 	MFP_PIN_GPIO0_2,
 	MFP_PIN_GPIO1_2,
 	MFP_PIN_GPIO2_2,
@@ -325,8 +393,9 @@
 #define MFP_PULL_LOW		(0x1 << 21)
 #define MFP_PULL_HIGH		(0x2 << 21)
 #define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+#define MFP_PULL_FLOAT		(0x4 << 21)
+#define MFP_PULL_MASK		(0x7 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x7)
 
 #define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
 				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index e716c62..9405d03 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -77,11 +77,13 @@
  * MFPR_PULL_LOW        1         0        1
  * MFPR_PULL_HIGH       1         1        0
  * MFPR_PULL_BOTH       1         1        1
+ * MFPR_PULL_FLOAT	1         0        0
  */
 #define MFPR_PULL_NONE		(0)
 #define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
 #define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
 #define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
@@ -116,6 +118,7 @@
 	MFPR_PULL_LOW,
 	MFPR_PULL_HIGH,
 	MFPR_PULL_BOTH,
+	MFPR_PULL_FLOAT,
 };
 
 /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index 260fdc6..5ff24e0 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -28,7 +28,7 @@
 
 	gpn = chip->chip.base;
 	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
 		s3c_gpios[gpn] = chip;
 	}
 }
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 67aa93d..266a107 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -345,13 +345,13 @@
 	if (!chan)
 		return -EINVAL;
 
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
 	if (!buff) {
 		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
 		return -ENOMEM;
 	}
 
-	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
 	if (!lli) {
 		printk(KERN_ERR "%s: no memory for lli\n", __func__);
 		ret = -ENOMEM;
@@ -697,7 +697,7 @@
 
 	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 
-	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
 	if (!dma_pool) {
 		printk(KERN_ERR "%s: failed to create pool\n", __func__);
 		return -ENOMEM;
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
index 0c30dd9..8f76a1e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -26,7 +26,7 @@
 	struct s3c64xx_dma_buff *next;
 
 	void			*pw;
-	struct pl080_lli	*lli;
+	struct pl080s_lli	*lli;
 	dma_addr_t		 lli_dma;
 };
 
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index 743a700..7956fd3 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -194,9 +194,17 @@
 
 #define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
 
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#define IRQ_BOARD_NR 16
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
 /* Set the default NR_IRQS */
 
-#define NR_IRQS	(IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#define NR_IRQS	(IRQ_BOARD_END + 1)
 
 #endif /* __ASM_PLAT_S3C64XX_IRQS_H */
 
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index febac19..9745852 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -302,8 +302,8 @@
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
@@ -328,6 +328,8 @@
 		clksrc |= src_nr << sclk->shift;
 
 		__raw_writel(clksrc, S3C_CLK_SRC);
+
+		clk->parent = parent;
 		return 0;
 	}
 
@@ -343,7 +345,7 @@
 	if (rate > parent_rate)
 		rate = parent_rate;
 	else {
-		div = rate / parent_rate;
+		div = parent_rate / rate;
 
 		if (div == 0)
 			div = 1;
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
index d2f4977..ef88f25 100644
--- a/arch/arm/plat-stmp3xxx/dma.c
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -264,7 +264,7 @@
 					stmp3xxx_dma_free_command(ch,
 								  &descriptors
 								  [i]);
-				} while (i-- >= 0);
+				} while (i-- > 0);
 			}
 			return err;
 		}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c8c55b4..94be7bb 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Sep 12 12:00:16 2009
+# Last update: Fri Sep 18 21:42:00 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1638,7 +1638,7 @@
 aml_m8050		MACH_AML_M8050		AML_M8050		1644
 mx35_3ds		MACH_MX35_3DS		MX35_3DS		1645
 mars			MACH_MARS		MARS			1646
-ntosd_644xa		MACH_NTOSD_644XA	NTOSD_644XA		1647
+neuros_osd2		MACH_NEUROS_OSD2	NEUROS_OSD2		1647
 badger			MACH_BADGER		BADGER			1648
 trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
 trizeps5		MACH_TRIZEPS5		TRIZEPS5		1650
@@ -1654,7 +1654,7 @@
 zoran43xx		MACH_ZORAN43XX		ZORAN43XX		1660
 sonix926		MACH_SONIX926		SONIX926		1661
 celestialsemi		MACH_CELESTIALSEMI	CELESTIALSEMI		1662
-cc9m2443		MACH_CC9M2443		CC9M2443		1663
+cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1663
 tw5334			MACH_TW5334		TW5334			1664
 omap_htcartemis		MACH_HTCARTEMIS		HTCARTEMIS		1665
 nal_hlite		MACH_NAL_HLITE		NAL_HLITE		1666
@@ -1802,7 +1802,7 @@
 rd88f5181l_ge		MACH_RD88F5181L_GE	RD88F5181L_GE		1812
 sifmain			MACH_SIFMAIN		SIFMAIN			1813
 sam9_l9261		MACH_SAM9_L9261		SAM9_L9261		1814
-cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1815
+cc9m2443		MACH_CC9M2443		CC9M2443		1815
 xaria300		MACH_XARIA300		XARIA300		1816
 it9200			MACH_IT9200		IT9200			1817
 rd88f5181l_fxo		MACH_RD88F5181L_FXO	RD88F5181L_FXO		1818
@@ -2409,3 +2409,15 @@
 pss2			MACH_PSS2		PSS2			2423
 davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
 str9100			MACH_STR9100		STR9100			2425
+net5big			MACH_NET5BIG		NET5BIG			2426
+seabed9263		MACH_SEABED9263		SEABED9263		2427
+mx51_m2id		MACH_MX51_M2ID		MX51_M2ID		2428
+octvocplus_eb		MACH_OCTVOCPLUS_EB	OCTVOCPLUS_EB		2429
+klk_firefox		MACH_KLK_FIREFOX	KLK_FIREFOX		2430
+klk_wirma_module	MACH_KLK_WIRMA_MODULE	KLK_WIRMA_MODULE	2431
+klk_wirma_mmi		MACH_KLK_WIRMA_MMI	KLK_WIRMA_MMI		2432
+supersonic		MACH_SUPERSONIC		SUPERSONIC		2433
+liberty			MACH_LIBERTY		LIBERTY			2434
+mh355			MACH_MH355		MH355			2435
+pc7802			MACH_PC7802		PC7802			2436
+gnet_sgc		MACH_GNET_SGC		GNET_SGC		2437
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 21ac7c2..ffd90fb 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -96,8 +96,7 @@
 	{
 		__sdata = .;
 		/* This gets done first, so the glob doesn't suck it in */
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		CACHELINE_ALIGNED_DATA(32)
 
 #if !L1_DATA_A_LENGTH
 		. = ALIGN(32);
@@ -116,12 +115,7 @@
 		DATA_DATA
 		CONSTRUCTORS
 
-		/* make sure the init_task is aligned to the
-		 * kernel thread size so we can locate the kernel
-		 * stack properly and quickly.
-		 */
-		. = ALIGN(THREAD_SIZE);
-		*(.init_task.data)
+		INIT_TASK_DATA(THREAD_SIZE)
 
 		__edata = .;
 	}
@@ -134,39 +128,10 @@
 	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 
-	.init.text :
-	{
-		. = ALIGN(PAGE_SIZE);
-		__sinittext = .;
-		INIT_TEXT
-		__einittext = .;
-	}
-	.init.data :
-	{
-		. = ALIGN(16);
-		INIT_DATA
-	}
-	.init.setup :
-	{
-		. = ALIGN(16);
-		___setup_start = .;
-		*(.init.setup)
-		___setup_end = .;
-	}
-	.initcall.init :
-	{
-		___initcall_start = .;
-		INITCALLS
-		___initcall_end = .;
-	}
-	.con_initcall.init :
-	{
-		___con_initcall_start = .;
-		*(.con_initcall.init)
-		___con_initcall_end = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	. = ALIGN(16);
+	INIT_DATA_SECTION(16)
 	PERCPU(4)
-	SECURITY_INIT
 
 	/* we have to discard exit text and such at runtime, not link time, to
 	 * handle embedded cross-section references (alt instructions, bug
@@ -181,18 +146,9 @@
 		EXIT_DATA
 	}
 
-	.init.ramfs :
-	{
-		. = ALIGN(4);
-		___initramfs_start = .;
-		*(.init.ramfs)
-		. = ALIGN(4);
-		___initramfs_end = .;
-	}
-
 	__l1_lma_start = .;
 
-	.text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
+	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
 	{
 		. = ALIGN(4);
 		__stext_l1 = .;
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 2b73c7a..31ca141 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -28,7 +28,6 @@
 
 extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
 extern int have_rtc;
 
 unsigned long get_ns_in_jiffie(void)
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index d2a3ff8..058addd 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -52,8 +52,6 @@
 static struct vm_area_struct* flush_vma;
 static unsigned long flush_addr;
 
-extern int setup_irq(int, struct irqaction *);
-
 /* Mode registers */
 static unsigned long irq_regs[NR_CPUS] = {
   regi_irq,
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 65633d0..b1920d8 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -46,7 +46,6 @@
 
 extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
 extern int have_rtc;
 
 #ifdef CONFIG_CPU_FREQ
diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c
index c22f67e..090ceb9 100644
--- a/arch/cris/arch-v32/mach-a3/io.c
+++ b/arch/cris/arch-v32/mach-a3/io.c
@@ -36,7 +36,7 @@
 	},
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led_net0_green;
 struct crisv32_iopin crisv32_led_net0_red;
diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c
index cb6327b..a695866 100644
--- a/arch/cris/arch-v32/mach-fs/io.c
+++ b/arch/cris/arch-v32/mach-fs/io.c
@@ -52,7 +52,7 @@
 	}
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led_net0_green;
 struct crisv32_iopin crisv32_led_net0_red;
diff --git a/arch/cris/include/arch-v10/arch/mmu.h b/arch/cris/include/arch-v10/arch/mmu.h
index df84f17..e829e5a 100644
--- a/arch/cris/include/arch-v10/arch/mmu.h
+++ b/arch/cris/include/arch-v10/arch/mmu.h
@@ -33,10 +33,10 @@
 
 /* CRIS PTE bits (see R_TLB_LO in the register description)
  *
- *   Bit:  31-13 12-------4    3        2       1       0  
- *         ________________________________________________
- *        | pfn | reserved | global | valid | kernel | we  |
- *        |_____|__________|________|_______|________|_____|
+ *   Bit:  31     30-13 12-------4    3        2       1       0
+ *         _______________________________________________________
+ *        | cache |pfn | reserved | global | valid | kernel | we  |
+ *        |_______|____|__________|________|_______|________|_____|
  *
  * (pfn = physical frame number)
  */
@@ -53,6 +53,7 @@
 #define _PAGE_VALID	   (1<<2) /* page is valid */
 #define _PAGE_SILENT_READ  (1<<2) /* synonym */
 #define _PAGE_GLOBAL       (1<<3) /* global page - context is ignored */
+#define _PAGE_NO_CACHE	   (1<<31) /* part of the uncached memory map */
 
 /* Bits the HW doesn't care about but the kernel uses them in SW */
 
diff --git a/arch/cris/include/arch-v32/arch/mmu.h b/arch/cris/include/arch-v32/arch/mmu.h
index 6bcdc3f..c1a13e0 100644
--- a/arch/cris/include/arch-v32/arch/mmu.h
+++ b/arch/cris/include/arch-v32/arch/mmu.h
@@ -28,10 +28,10 @@
 /*
  * CRISv32 PTE bits:
  *
- *  Bit:  31-13  12-5     4        3       2        1        0
- *       +-----+------+--------+-------+--------+-------+---------+
- *       | pfn | zero | global | valid | kernel | write | execute |
- *       +-----+------+--------+-------+--------+-------+---------+
+ *  Bit:   31     30-13  12-5     4        3       2        1        0
+ *       +-------+-----+------+--------+-------+--------+-------+---------+
+ *       | cache | pfn | zero | global | valid | kernel | write | execute |
+ *       +-------+-----+------+--------+-------+--------+-------+---------+
  */
 
 /*
@@ -45,6 +45,8 @@
 #define _PAGE_VALID         (1 << 3)	/* Page is valid. */
 #define _PAGE_SILENT_READ   (1 << 3)	/* Same as above. */
 #define _PAGE_GLOBAL        (1 << 4)	/* Global page. */
+#define _PAGE_NO_CACHE	    (1 << 31)	/* part of the uncached memory map */
+
 
 /*
  * The hardware doesn't care about these bits, but the kernel uses them in
diff --git a/arch/cris/include/asm/hardirq.h b/arch/cris/include/asm/hardirq.h
index 74178ad..17bb12d 100644
--- a/arch/cris/include/asm/hardirq.h
+++ b/arch/cris/include/asm/hardirq.h
@@ -2,16 +2,6 @@
 #define __ASM_HARDIRQ_H
 
 #include <asm/irq.h>
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
 
 #define HARDIRQ_BITS	8
 
@@ -24,4 +14,6 @@
 # error HARDIRQ_BITS is too low!
 #endif
 
+#include <asm-generic/hardirq.h>
+
 #endif /* __ASM_HARDIRQ_H */
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 50aa974..1fcce00 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -197,6 +197,8 @@
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 { pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
 
+#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) | _PAGE_NO_CACHE))
+
 
 /* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval
  * __pte_page(pte_val) refers to the "virtual" DRAM interval
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index 7f642fc..0ca7d98 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -38,11 +38,6 @@
 
 #include <asm/io.h>
 
-void ack_bad_irq(unsigned int irq)
-{
-	printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, j;
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 6c81836..bbfda67 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -51,10 +51,7 @@
 	_etext = . ;			/* End of text section. */
 	__etext = .;
 
-	. = ALIGN(4);			/* Exception table. */
-	__start___ex_table = .;
-	__ex_table : { *(__ex_table) }
-	__stop___ex_table = .;
+	EXCEPTION_TABLE(4)
 
 	RODATA
 
@@ -67,36 +64,24 @@
 	__edata = . ;			/* End of data section. */
 	_edata = . ;
 
-	. = ALIGN(PAGE_SIZE);	/* init_task and stack, must be aligned. */
-	.data.init_task : { *(.data.init_task) }
+	INIT_TASK_DATA_SECTION(PAGE_SIZE)
 
 	. = ALIGN(PAGE_SIZE);		/* Init code and data. */
 	__init_begin = .;
-	.init.text : {
-		   _sinittext = .;
-		   INIT_TEXT
-		   _einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 	.init.data : { INIT_DATA }
-	. = ALIGN(16);
-	__setup_start = .;
-	.init.setup : { *(.init.setup) }
-	__setup_end = .;
+	.init.setup : { INIT_SETUP(16) }
 #ifdef CONFIG_ETRAX_ARCH_V32
 	__start___param = .;
 	__param : { *(__param) }
 	__stop___param = .;
 #endif
 	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
+		INIT_CALLS
 	}
 
 	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 	SECURITY_INIT
 
@@ -114,9 +99,7 @@
 	PERCPU(PAGE_SIZE)
 
 	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
+		INIT_RAM_FS
 	}
 #endif
 
@@ -130,11 +113,7 @@
 	__init_end = .;
 
 	__data_end = . ;		/* Move to _edata ? */
-	__bss_start = .;		/* BSS. */
-	.bss : {
-		*(COMMON)
-		*(.bss)
-	}
+	BSS_SECTION(0, 0, 0)
 
 	. =  ALIGN (0x20);
 	_end = .;
diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile
index 76595e8..b73b542 100644
--- a/arch/frv/mb93090-mb00/Makefile
+++ b/arch/frv/mb93090-mb00/Makefile
@@ -11,3 +11,5 @@
 obj-y += pci-dma-nommu.o
 endif
 endif
+
+obj-$(CONFIG_MTD) += flash.o
diff --git a/arch/frv/mb93090-mb00/flash.c b/arch/frv/mb93090-mb00/flash.c
new file mode 100644
index 0000000..c0e3707
--- /dev/null
+++ b/arch/frv/mb93090-mb00/flash.c
@@ -0,0 +1,90 @@
+/* Flash mappings for the MB93090-MB00 motherboard
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define MB93090_BOOTROM_ADDR	0xFF000000	/* Boot ROM */
+#define MB93090_BOOTROM_SIZE	(2 * 1024 * 1024)
+#define MB93090_USERROM_ADDR	0xFF200000	/* User ROM */
+#define MB93090_USERROM_SIZE	(2 * 1024 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition mb93090_partitions[] = {
+	{
+		.name		= "Filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+	}
+};
+
+/*
+ * Definition of the MB93090 Boot ROM (on the CPU card)
+ */
+static struct physmap_flash_data mb93090_bootrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_bootrom_resource = {
+	.start		= MB93090_BOOTROM_ADDR,
+	.end		= MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_bootrom = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev.platform_data = &mb93090_bootrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_bootrom_resource,
+};
+
+/*
+ * Definition of the MB93090 User ROM definition (on the motherboard)
+ */
+static struct physmap_flash_data mb93090_userrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_userrom_resource = {
+	.start		= MB93090_USERROM_ADDR,
+	.end		= MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_userrom = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.dev.platform_data = &mb93090_userrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_userrom_resource,
+};
+
+/*
+ * register the MB93090 flashes
+ */
+static int __init mb93090_mtd_init(void)
+{
+	platform_device_register(&mb93090_bootrom);
+	platform_device_register(&mb93090_userrom);
+	return 0;
+}
+
+module_init(mb93090_mtd_init);
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 662b02e..b9e24907 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -1,5 +1,6 @@
 #define VMLINUX_SYMBOL(_sym_) _##_sym_
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 /* target memory map */
 #ifdef CONFIG_H8300H_GENERIC
@@ -79,11 +80,8 @@
 	SCHED_TEXT
 	LOCK_TEXT
 	__etext = . ;
-	. = ALIGN(16);          /* Exception table              */
-	___start___ex_table = .;
-		*(__ex_table)
-	___stop___ex_table = .;
 	}
+	EXCEPTION_TABLE(16)
 
 	RODATA
 #if defined(CONFIG_ROMKERNEL)
@@ -100,8 +98,7 @@
 	__sdata = . ;
 	___data_start = . ;
 
-	. = ALIGN(0x2000) ;
-		*(.data.init_task)
+	INIT_TASK_DATA(0x2000)
 	. = ALIGN(0x4) ;
 		DATA_DATA
 	. = ALIGN(0x4) ;
@@ -114,24 +111,16 @@
 	__einittext = .; 
 		INIT_DATA
 	. = ALIGN(0x4) ;
+	INIT_SETUP(0x4)
 	___setup_start = .;
 		*(.init.setup)
 	. = ALIGN(0x4) ;
 	___setup_end = .;
-	___initcall_start = .;
-		INITCALLS
-	___initcall_end = .;
-	___con_initcall_start = .;
-		*(.con_initcall.init)
-	___con_initcall_end = .;
+	INIT_CALLS
+	CON_INITCALL
 		EXIT_TEXT
 		EXIT_DATA
-#if defined(CONFIG_BLK_DEV_INITRD)
-		. = ALIGN(4);
-	___initramfs_start = .;
-  		*(.init.ramfs)
-  	___initramfs_end = .;
-#endif
+	INIT_RAM_FS
 	. = ALIGN(0x4) ;
 	___init_end = .;
 	__edata = . ;
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 6851e52..1ee596c 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -60,9 +60,7 @@
        bool
 
 config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
+	def_bool n
 
 config RWSEM_XCHGADD_ALGORITHM
 	bool
diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
index f92bdaa..c69552b 100644
--- a/arch/ia64/ia32/binfmt_elf32.c
+++ b/arch/ia64/ia32/binfmt_elf32.c
@@ -69,11 +69,11 @@
 }
 
 
-static struct vm_operations_struct ia32_shared_page_vm_ops = {
+static const struct vm_operations_struct ia32_shared_page_vm_ops = {
 	.fault = ia32_install_shared_page
 };
 
-static struct vm_operations_struct ia32_gate_page_vm_ops = {
+static const struct vm_operations_struct ia32_gate_page_vm_ops = {
 	.fault = ia32_install_gate_page
 };
 
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 0f82cc2..91df968 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -89,10 +89,12 @@
 #define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq)				\
 	((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
 
+#ifdef	CONFIG_ACPI
 #define acpi_disabled 0	/* ACPI always enabled on IA64 */
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
 #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
 
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 13ab715..30bb930 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -19,103 +19,106 @@
 
 #define __raw_spin_lock_init(x)			((x)->lock = 0)
 
-#ifdef ASM_SUPPORTED
 /*
- * Try to get the lock.  If we fail to get the lock, make a non-standard call to
- * ia64_spinlock_contention().  We do not use a normal call because that would force all
- * callers of __raw_spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
- * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered".
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ *
+ *   63                     32  31                      0
+ *  +----------------------------------------------------+
+ *  |  next_ticket_number      |     now_serving         |
+ *  +----------------------------------------------------+
  */
 
-#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+#define TICKET_SHIFT	32
 
-static inline void
-__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags)
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
 {
-	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
+	int	*p = (int *)&lock->lock, turn, now_serving;
 
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) br.cond.spnt.many b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#else
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	/* mis-declare, so we get the entry-point, not it's function descriptor: */
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "(p14) br.call.spnt.many b6 = b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#endif
+	now_serving = *p;
+	turn = ia64_fetchadd(1, p+1, acq);
+
+	if (turn == now_serving)
+		return;
+
+	do {
+		cpu_relax();
+	} while (ACCESS_ONCE(*p) != turn);
 }
 
-#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock), try;
 
-/* Unlock by doing an ordered store and releasing the cacheline with nta */
-static inline void __raw_spin_unlock(raw_spinlock_t *x) {
-	barrier();
-	asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x));
+	if (!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1))) {
+		try = tmp + (1L << TICKET_SHIFT);
+
+		return ia64_cmpxchg(acq, &lock->lock, tmp, try, sizeof (tmp)) == tmp;
+	}
+	return 0;
 }
 
-#else /* !ASM_SUPPORTED */
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-# define __raw_spin_lock(x)								\
-do {											\
-	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
-	__u64 ia64_spinlock_val;							\
-	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
-	if (unlikely(ia64_spinlock_val)) {						\
-		do {									\
-			while (*ia64_spinlock_ptr)					\
-				ia64_barrier();						\
-			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
-		} while (ia64_spinlock_val);						\
-	}										\
-} while (0)
-#define __raw_spin_unlock(x)	do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0)
-#endif /* !ASM_SUPPORTED */
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+	int	*p = (int *)&lock->lock;
 
-#define __raw_spin_is_locked(x)		((x)->lock != 0)
-#define __raw_spin_trylock(x)		(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+	(void)ia64_fetchadd(1, p, rel);
+}
+
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock);
+
+	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1));
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock);
+
+	return (((tmp >> TICKET_SHIFT) - tmp) & ((1L << TICKET_SHIFT) - 1)) > 1;
+}
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_locked(lock);
+}
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_contended(lock);
+}
+#define __raw_spin_is_contended	__raw_spin_is_contended
+
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__ticket_spin_lock(lock);
+}
+
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return __ticket_spin_trylock(lock);
+}
+
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__ticket_spin_unlock(lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+						  unsigned long flags)
+{
+	__raw_spin_lock(lock);
+}
+
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+	while (__raw_spin_is_locked(lock))
+		cpu_relax();
+}
 
 #define __raw_read_can_lock(rw)		(*(volatile int *)(rw) >= 0)
 #define __raw_write_can_lock(rw)	(*(volatile int *)(rw) == 0)
diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h
index 474e46f..b61d136 100644
--- a/arch/ia64/include/asm/spinlock_types.h
+++ b/arch/ia64/include/asm/spinlock_types.h
@@ -6,7 +6,7 @@
 #endif
 
 typedef struct {
-	volatile unsigned int lock;
+	volatile unsigned long lock;
 } raw_spinlock_t;
 
 #define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 1a6e445..696eff2 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -1130,95 +1130,6 @@
 #endif /* CONFIG_IA64_BRL_EMU */
 
 #ifdef CONFIG_SMP
-	/*
-	 * This routine handles spinlock contention.  It uses a non-standard calling
-	 * convention to avoid converting leaf routines into interior routines.  Because
-	 * of this special convention, there are several restrictions:
-	 *
-	 * - do not use gp relative variables, this code is called from the kernel
-	 *   and from modules, r1 is undefined.
-	 * - do not use stacked registers, the caller owns them.
-	 * - do not use the scratch stack space, the caller owns it.
-	 * - do not use any registers other than the ones listed below
-	 *
-	 * Inputs:
-	 *   ar.pfs - saved CFM of caller
-	 *   ar.ccv - 0 (and available for use)
-	 *   r27    - flags from spin_lock_irqsave or 0.  Must be preserved.
-	 *   r28    - available for use.
-	 *   r29    - available for use.
-	 *   r30    - available for use.
-	 *   r31    - address of lock, available for use.
-	 *   b6     - return address
-	 *   p14    - available for use.
-	 *   p15    - used to track flag status.
-	 *
-	 * If you patch this code to use more registers, do not forget to update
-	 * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
-	 */
-
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-
-GLOBAL_ENTRY(ia64_spinlock_contention_pre3_4)
-	.prologue
-	.save ar.pfs, r0	// this code effectively has a zero frame size
-	.save rp, r28
-	.body
-	nop 0
-	tbit.nz p15,p0=r27,IA64_PSR_I_BIT
-	.restore sp		// pop existing prologue after next insn
-	mov b6 = r28
-	.prologue
-	.save ar.pfs, r0
-	.altrp b6
-	.body
-	;;
-(p15)	ssm psr.i		// reenable interrupts if they were on
-				// DavidM says that srlz.d is slow and is not required in this case
-.wait:
-	// exponential backoff, kdb, lockmeter etc. go in here
-	hint @pause
-	ld4 r30=[r31]		// don't use ld4.bias; if it's contended, we won't write the word
-	nop 0
-	;;
-	cmp4.ne p14,p0=r30,r0
-(p14)	br.cond.sptk.few .wait
-(p15)	rsm psr.i		// disable interrupts if we reenabled them
-	br.cond.sptk.few b6	// lock is now free, try to acquire
-	.global ia64_spinlock_contention_pre3_4_end	// for kernprof
-ia64_spinlock_contention_pre3_4_end:
-END(ia64_spinlock_contention_pre3_4)
-
-#else
-
-GLOBAL_ENTRY(ia64_spinlock_contention)
-	.prologue
-	.altrp b6
-	.body
-	tbit.nz p15,p0=r27,IA64_PSR_I_BIT
-	;;
-.wait:
-(p15)	ssm psr.i		// reenable interrupts if they were on
-				// DavidM says that srlz.d is slow and is not required in this case
-.wait2:
-	// exponential backoff, kdb, lockmeter etc. go in here
-	hint @pause
-	ld4 r30=[r31]		// don't use ld4.bias; if it's contended, we won't write the word
-	;;
-	cmp4.ne p14,p0=r30,r0
-	mov r30 = 1
-(p14)	br.cond.sptk.few .wait2
-(p15)	rsm psr.i		// disable interrupts if we reenabled them
-	;;
-	cmpxchg4.acq r30=[r31], r30, ar.ccv
-	;;
-	cmp4.ne p14,p0=r0,r30
-(p14)	br.cond.sptk.few .wait
-
-	br.ret.sptk.many b6	// lock is now taken
-END(ia64_spinlock_contention)
-
-#endif
 
 #ifdef CONFIG_HOTPLUG_CPU
 GLOBAL_ENTRY(ia64_jump_to_sal)
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 8ebccb5..14d39e3 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -84,26 +84,6 @@
 #include <asm/unwind.h>
 EXPORT_SYMBOL(unw_init_running);
 
-#ifdef ASM_SUPPORTED
-# ifdef CONFIG_SMP
-#  if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention_pre3_4;
-EXPORT_SYMBOL(ia64_spinlock_contention_pre3_4);
-#  else
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention;
-EXPORT_SYMBOL(ia64_spinlock_contention);
-#  endif
-# endif
-#endif
-
 #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
 extern void esi_call_phys (void);
 EXPORT_SYMBOL_GPL(esi_call_phys);
diff --git a/arch/ia64/oprofile/backtrace.c b/arch/ia64/oprofile/backtrace.c
index adb0156..5cdd7e4 100644
--- a/arch/ia64/oprofile/backtrace.c
+++ b/arch/ia64/oprofile/backtrace.c
@@ -32,24 +32,6 @@
 	u64 *prev_pfs_loc;	/* state for WAR for old spinlock ool code */
 } ia64_backtrace_t;
 
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * Returns non-zero if the PC is in the spinlock contention out-of-line code
- * with non-standard calling sequence (on older compilers).
- */
-static __inline__ int in_old_ool_spinlock_code(unsigned long pc)
-{
-	extern const char ia64_spinlock_contention_pre3_4[] __attribute__ ((weak));
-	extern const char ia64_spinlock_contention_pre3_4_end[] __attribute__ ((weak));
-	unsigned long sc_start = (unsigned long)ia64_spinlock_contention_pre3_4;
-	unsigned long sc_end = (unsigned long)ia64_spinlock_contention_pre3_4_end;
-	return (sc_start && sc_end && pc >= sc_start && pc < sc_end);
-}
-#else
-/* Newer spinlock code does a proper br.call and works fine with the unwinder */
-#define in_old_ool_spinlock_code(pc)	0
-#endif
-
 /* Returns non-zero if the PC is in the Interrupt Vector Table */
 static __inline__ int in_ivt_code(unsigned long pc)
 {
@@ -80,7 +62,7 @@
 	 */
 	if (bt->prev_pfs_loc && bt->regs && bt->frame.pfs_loc == bt->prev_pfs_loc)
 		bt->frame.pfs_loc = &bt->regs->ar_pfs;
-	bt->prev_pfs_loc = (in_old_ool_spinlock_code(bt->frame.ip) ? bt->frame.pfs_loc : NULL);
+	bt->prev_pfs_loc = NULL;
 
 	return unw_unwind(&bt->frame) == 0;
 }
diff --git a/arch/m32r/include/asm/page.h b/arch/m32r/include/asm/page.h
index 11777f7..725ede8 100644
--- a/arch/m32r/include/asm/page.h
+++ b/arch/m32r/include/asm/page.h
@@ -1,9 +1,11 @@
 #ifndef _ASM_M32R_PAGE_H
 #define _ASM_M32R_PAGE_H
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	12
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/m32r/include/asm/processor.h b/arch/m32r/include/asm/processor.h
index 1a997fc..8397c24 100644
--- a/arch/m32r/include/asm/processor.h
+++ b/arch/m32r/include/asm/processor.h
@@ -140,8 +140,6 @@
 #define KSTK_EIP(tsk)  ((tsk)->thread.lr)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define THREAD_SIZE (2*PAGE_SIZE)
-
 #define cpu_relax()	barrier()
 
 #endif /* _ASM_M32R_PROCESSOR_H */
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 7157815..ed240b6 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -55,6 +55,8 @@
 
 #define PREEMPT_ACTIVE		0x10000000
 
+#define THREAD_SIZE (PAGE_SIZE << 1)
+
 /*
  * macros/functions for gaining access to the thread information structure
  */
@@ -76,8 +78,6 @@
 #define init_thread_info	(init_thread_union.thread_info)
 #define init_stack		(init_thread_union.stack)
 
-#define THREAD_SIZE (2*PAGE_SIZE)
-
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
 {
@@ -125,17 +125,6 @@
 	return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
 }
 
-#else /* !__ASSEMBLY__ */
-
-#define THREAD_SIZE	8192
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
-	.macro GET_THREAD_INFO reg
-	ldi	\reg, #-THREAD_SIZE
-	and	\reg, sp
-	.endm
-
 #endif
 
 /*
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 612d35b..4038698 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -118,6 +118,13 @@
 #define resume_kernel		restore_all
 #endif
 
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
+	.macro GET_THREAD_INFO reg
+	ldi	\reg, #-THREAD_SIZE
+	and	\reg, sp
+	.endm
+
 ENTRY(ret_from_fork)
 	pop	r0
 	bl	schedule_tail
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index 0a71944..a46652d 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -268,13 +268,13 @@
 /*------------------------------------------------------------------------
  * Stack area
  */
-	.section .spi
+	.section .init.data, "aw"
 	ALIGN
 	.global spi_stack_top
 	.zero	1024
 spi_stack_top:
 
-	.section .spu
+	.section .init.data, "aw"
 	ALIGN
 	.global spu_stack_top
 	.zero	1024
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index de5e21c..8ceb618 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -4,6 +4,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_ARCH(m32r)
 #if defined(__LITTLE_ENDIAN__)
@@ -40,83 +41,22 @@
 #endif
   _etext = .;			/* End of text section */
 
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
+  EXCEPTION_TABLE(16)
   RODATA
-
-  /* writeable */
-  .data : {			/* Data */
-	*(.spu)
-	*(.spi)
-	DATA_DATA
-	CONSTRUCTORS
-	}
-
-  . = ALIGN(4096);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
+  RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
   _edata = .;			/* End of data section */
 
-  . = ALIGN(8192);		/* init_task */
-  .data.init_task : { *(.data.init_task) }
-
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  .init.data : { INIT_DATA }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-  SECURITY_INIT
-  . = ALIGN(4);
-  __alt_instructions = .;
-  .altinstructions : { *(.altinstructions) }
-  __alt_instructions_end = .;
-  .altinstr_replacement : { *(.altinstr_replacement) }
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : { EXIT_TEXT }
-  .exit.data : { EXIT_DATA }
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  PERCPU(4096)
-  . = ALIGN(4096);
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
+  PERCPU(PAGE_SIZE)
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 
-  __bss_start = .;		/* BSS */
-  .bss : { *(.bss) }
-  . = ALIGN(4);
-  __bss_stop = .;
+  BSS_SECTION(0, 0, 4)
 
   _end = . ;
 
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 3ab6d80..19c1c82 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -175,7 +175,7 @@
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
 #ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
 #endif
 
 
@@ -993,14 +993,13 @@
 	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
 
 	/* save channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
 		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
 		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
 		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
 		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
 		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
-		au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
 
 		/* halt channel */
 		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
@@ -1027,14 +1026,13 @@
 	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
 		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
 		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
 		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
 		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
 		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
-		au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
 		au_sync();
 		addr += 0x100;	/* next channel base */
 	}
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
index dfbfd7e..938b1d0 100644
--- a/arch/mips/basler/excite/excite_iodev.c
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -112,10 +112,8 @@
 {
 	int ret;
 
-	lock_kernel();
 	ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
 			   iodev_name, &miscdev);
-	unlock_kernel();
 
 	return ret;
 }
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index aaa585c..c146d1e 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,5 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o dev-enet.o
+		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index fd77f54..78e155d 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -20,10 +20,11 @@
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
-#include <bcm63xx_board.h>
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_uart.h>
 #include <board_bcm963xx.h>
 
 #define PFX	"board_bcm963xx: "
@@ -793,6 +794,11 @@
 {
 	u32 val;
 
+	bcm63xx_uart_register();
+
+	if (board.has_pccard)
+		bcm63xx_pcmcia_register();
+
 	if (board.has_enet0 &&
 	    !board_get_mac_address(board.enet0.mac_addr))
 		bcm63xx_enet_register(0, &board.enet0);
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
new file mode 100644
index 0000000..de4d917
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource pcmcia_resources[] = {
+	/* pcmcia registers */
+	{
+		/* start & end filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* pcmcia memory zone resources */
+	{
+		.start		= BCM_PCMCIA_COMMON_BASE_PA,
+		.end		= BCM_PCMCIA_COMMON_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_ATTR_BASE_PA,
+		.end		= BCM_PCMCIA_ATTR_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* PCMCIA irq */
+	{
+		/* start filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+
+	/* declare PCMCIA IO resource also */
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_IO,
+	},
+};
+
+static struct bcm63xx_pcmcia_platform_data pd;
+
+static struct platform_device bcm63xx_pcmcia_device = {
+	.name		= "bcm63xx_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pcmcia_resources),
+	.resource	= pcmcia_resources,
+	.dev		= {
+		.platform_data = &pd,
+	},
+};
+
+static int __init config_pcmcia_cs(unsigned int cs,
+				   u32 base, unsigned int size)
+{
+	int ret;
+
+	ret = bcm63xx_set_cs_status(cs, 0);
+	if (!ret)
+		ret = bcm63xx_set_cs_base(cs, base, size);
+	if (!ret)
+		ret = bcm63xx_set_cs_status(cs, 1);
+	return ret;
+}
+
+static const __initdata struct {
+	unsigned int	cs;
+	unsigned int	base;
+	unsigned int	size;
+} pcmcia_cs[3] = {
+	{
+		.cs	= MPI_CS_PCMCIA_COMMON,
+		.base	= BCM_PCMCIA_COMMON_BASE_PA,
+		.size	= BCM_PCMCIA_COMMON_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_ATTR,
+		.base	= BCM_PCMCIA_ATTR_BASE_PA,
+		.size	= BCM_PCMCIA_ATTR_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_IO,
+		.base	= BCM_PCMCIA_IO_BASE_PA,
+		.size	= BCM_PCMCIA_IO_SIZE
+	},
+};
+
+int __init bcm63xx_pcmcia_register(void)
+{
+	int ret, i;
+
+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+		return 0;
+
+	/* use correct pcmcia ready gpio depending on processor */
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6348_CPU_ID:
+		pd.ready_gpio = 22;
+		break;
+
+	case BCM6358_CPU_ID:
+		pd.ready_gpio = 18;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+	pcmcia_resources[0].end = pcmcia_resources[0].start +
+		RSET_PCMCIA_SIZE - 1;
+	pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
+
+	/* configure pcmcia chip selects */
+	for (i = 0; i < 3; i++) {
+		ret = config_pcmcia_cs(pcmcia_cs[i].cs,
+				       pcmcia_cs[i].base,
+				       pcmcia_cs[i].size);
+		if (ret)
+			goto out_err;
+	}
+
+	return platform_device_register(&bcm63xx_pcmcia_device);
+
+out_err:
+	printk(KERN_ERR "unable to set pcmcia chip select\n");
+	return ret;
+}
diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
new file mode 100644
index 0000000..5f3d89c
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-uart.c
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
+
+static struct resource uart_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_uart_device = {
+	.name		= "bcm63xx_uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(uart_resources),
+	.resource	= uart_resources,
+};
+
+int __init bcm63xx_uart_register(void)
+{
+	uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+	uart_resources[0].end = uart_resources[0].start;
+	uart_resources[0].end += RSET_UART_SIZE - 1;
+	uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+	return platform_device_register(&bcm63xx_uart_device);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
new file mode 100644
index 0000000..2beb396
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
@@ -0,0 +1,13 @@
+#ifndef BCM63XX_DEV_PCMCIA_H_
+#define BCM63XX_DEV_PCMCIA_H_
+
+/*
+ * PCMCIA driver platform data
+ */
+struct bcm63xx_pcmcia_platform_data {
+	unsigned int ready_gpio;
+};
+
+int bcm63xx_pcmcia_register(void);
+
+#endif /* BCM63XX_DEV_PCMCIA_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
new file mode 100644
index 0000000..bf348f5
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_UART_H_
+#define BCM63XX_DEV_UART_H_
+
+int bcm63xx_uart_register(void);
+
+#endif /* BCM63XX_DEV_UART_H_ */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index e15f11a..af42385 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -77,7 +77,18 @@
 
 extern asmlinkage void smp_call_function_interrupt(void);
 
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
+}
+
+static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
+}
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
index 7924049..42f66c3 100644
--- a/arch/mips/include/asm/unaligned.h
+++ b/arch/mips/include/asm/unaligned.h
@@ -12,17 +12,17 @@
 #if defined(__MIPSEB__)
 # include <linux/unaligned/be_struct.h>
 # include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_be
 # define put_unaligned	__put_unaligned_be
 #elif defined(__MIPSEL__)
 # include <linux/unaligned/le_struct.h>
 # include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_le
 # define put_unaligned	__put_unaligned_le
 #else
 #  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
 #endif
 
+# include <linux/unaligned/generic.h>
+
 #endif /* _ASM_MIPS_UNALIGNED_H */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index e961221..eecd2a9 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the Linux/MIPS kernel.
 #
 
+CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
+
 extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index f2397f0..ad4e017 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -172,13 +172,20 @@
 }
 
 
-static void sp_setfsuidgid( uid_t uid, gid_t gid)
+static int sp_setfsuidgid(uid_t uid, gid_t gid)
 {
-	current->cred->fsuid = uid;
-	current->cred->fsgid = gid;
+	struct cred *new;
 
-	key_fsuid_changed(current);
-	key_fsgid_changed(current);
+	new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	new->fsuid = uid;
+	new->fsgid = gid;
+
+	commit_creds(new);
+
+	return 0;
 }
 
 /*
@@ -196,7 +203,7 @@
 	mm_segment_t old_fs;
 	struct timeval tv;
 	struct timezone tz;
-	int cmd;
+	int err, cmd;
 
 	char *vcwd;
 	int size;
@@ -225,8 +232,11 @@
 	/* Run the syscall at the privilege of the user who loaded the
 	   SP program */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+		if (!err)
+			pr_err("Change of creds failed\n");
+	}
 
 	switch (sc.cmd) {
 	/* needs the flags argument translating from SDE kit to
@@ -283,8 +293,11 @@
 		break;
  	} /* switch */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid( 0, 0);
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(0, 0);
+		if (!err)
+			pr_err("restoring old creds failed\n");
+	}
 
 	old_fs = get_fs();
 	set_fs(KERNEL_DS);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index a10ebfd..364f066 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,8 +72,9 @@
 */
 static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
 {
+	unsigned int vpeflags;
+	unsigned long flags;
 	int i;
-	unsigned int flags, vpeflags;
 
 	/* Ought not to be strictly necessary for SMTC builds */
 	local_irq_save(flags);
@@ -392,20 +393,12 @@
 
 static int file_open(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-	int err;
-
-	lock_kernel();
-	err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
-	unlock_kernel();
-	return err;
+	return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1);
 }
 
 static int file_release(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-
-	return rtlx_release(minor);
+	return rtlx_release(iminor(inode));
 }
 
 static unsigned int file_poll(struct file *file, poll_table * wait)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 4eb106c..e72e684 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -32,7 +32,6 @@
 #include <linux/cpumask.h>
 #include <linux/cpu.h>
 #include <linux/err.h>
-#include <linux/smp.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
@@ -128,19 +127,6 @@
 	cpu_idle();
 }
 
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
-	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
-}
-
-/*
- * We reuse the same vector for the single IPI
- */
-void arch_send_call_function_single_ipi(int cpu)
-{
-	mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
-}
-
 /*
  * Call into both interrupt handlers, as we share the IPI for them
  */
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 67153a0..4d181df4 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1098,9 +1098,8 @@
 
 static struct irqaction irq_ipi = {
 	.handler	= ipi_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "SMTC_IPI",
-	.flags		= IRQF_PERCPU
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "SMTC_IPI"
 };
 
 static void setup_cross_vpe_interrupts(unsigned int nvpe)
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 9bf0e3d..162b299 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -11,15 +11,15 @@
 	note PT_NOTE FLAGS(4);	/* R__ */
 }
 
-ifdef CONFIG_32BIT
-	ifdef CONFIG_CPU_LITTLE_ENDIAN
+#ifdef CONFIG_32BIT
+	#ifdef CONFIG_CPU_LITTLE_ENDIAN
 		jiffies  = jiffies_64;
-	else
+	#else
 		jiffies  = jiffies_64 + 4;
-	endif
-else
+	#endif
+#else
 	jiffies  = jiffies_64;
-endif
+#endif
 
 SECTIONS
 {
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eb6c4c5..03092ab 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -144,14 +144,15 @@
 };
 
 struct {
-	/* Virtual processing elements */
-	struct list_head vpe_list;
-
-	/* Thread contexts */
-	struct list_head tc_list;
+	spinlock_t vpe_list_lock;
+	struct list_head vpe_list;	/* Virtual processing elements */
+	spinlock_t tc_list_lock;
+	struct list_head tc_list;	/* Thread contexts */
 } vpecontrol = {
-	.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
-	.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
+	.vpe_list_lock	= SPIN_LOCK_UNLOCKED,
+	.vpe_list	= LIST_HEAD_INIT(vpecontrol.vpe_list),
+	.tc_list_lock	= SPIN_LOCK_UNLOCKED,
+	.tc_list	= LIST_HEAD_INIT(vpecontrol.tc_list)
 };
 
 static void release_progmem(void *ptr);
@@ -159,28 +160,38 @@
 /* get the vpe associated with this minor */
 static struct vpe *get_vpe(int minor)
 {
-	struct vpe *v;
+	struct vpe *res, *v;
 
 	if (!cpu_has_mipsmt)
 		return NULL;
 
+	res = NULL;
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
-		if (v->minor == minor)
-			return v;
+		if (v->minor == minor) {
+			res = v;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
-	return NULL;
+	return res;
 }
 
 /* get the vpe associated with this minor */
 static struct tc *get_tc(int index)
 {
-	struct tc *t;
+	struct tc *res, *t;
 
+	res = NULL;
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_for_each_entry(t, &vpecontrol.tc_list, list) {
-		if (t->index == index)
-			return t;
+		if (t->index == index) {
+			res = t;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 	return NULL;
 }
@@ -190,15 +201,17 @@
 {
 	struct vpe *v;
 
-	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
 		return NULL;
-	}
 
 	INIT_LIST_HEAD(&v->tc);
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_add_tail(&v->list, &vpecontrol.vpe_list);
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
 	INIT_LIST_HEAD(&v->notify);
 	v->minor = minor;
+
 	return v;
 }
 
@@ -212,7 +225,10 @@
 
 	INIT_LIST_HEAD(&tc->tc);
 	tc->index = index;
+
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_add_tail(&tc->list, &vpecontrol.tc_list);
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 out:
 	return tc;
@@ -227,7 +243,7 @@
 	kfree(v);
 }
 
-static void dump_mtregs(void)
+static void __maybe_unused dump_mtregs(void)
 {
 	unsigned long val;
 
@@ -1048,20 +1064,19 @@
 	enum vpe_state state;
 	struct vpe_notifications *not;
 	struct vpe *v;
-	int ret, err = 0;
+	int ret;
 
-	lock_kernel();
 	if (minor != iminor(inode)) {
 		/* assume only 1 device at the moment. */
-		printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: only vpe1 is supported\n");
+
+		return -ENODEV;
 	}
 
 	if ((v = get_vpe(tclimit)) == NULL) {
-		printk(KERN_WARNING "VPE loader: unable to get vpe\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: unable to get vpe\n");
+
+		return -ENODEV;
 	}
 
 	state = xchg(&v->state, VPE_STATE_INUSE);
@@ -1101,8 +1116,8 @@
 	v->shared_ptr = NULL;
 	v->__start = 0;
 
-out:
 	unlock_kernel();
+
 	return 0;
 }
 
@@ -1594,14 +1609,14 @@
 {
 	struct vpe *v, *n;
 
-	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
-		if (v->state != VPE_STATE_UNUSED) {
-			release_vpe(v);
-		}
-	}
-
 	device_del(&vpe_device);
 	unregister_chrdev(major, module_name);
+
+	/* No locking needed here */
+	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+		if (v->state != VPE_STATE_UNUSED)
+			release_vpe(v);
+	}
 }
 
 module_init(vpe_module_init);
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index b55c2d1..5ab5fa8 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -32,6 +32,11 @@
  */
 static void mips_sc_inv(unsigned long addr, unsigned long size)
 {
+	unsigned long lsize = cpu_scache_line_size();
+	unsigned long almask = ~(lsize - 1);
+
+	cache_op(Hit_Writeback_Inv_SD, addr & almask);
+	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
 	blast_inv_scache_range(addr, addr + size);
 }
 
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 655cb8d..deed1d5 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -44,7 +44,7 @@
 	unsigned int ctrl;
 	unsigned long long reset_counter1;
 	unsigned long long reset_counter2;
-	int cnt1_enalbed, cnt2_enalbed;
+	int cnt1_enabled, cnt2_enabled;
 } reg;
 
 DEFINE_SPINLOCK(sample_lock);
@@ -81,8 +81,8 @@
 
 	reg.ctrl = ctrl;
 
-	reg.cnt1_enalbed = cfg[0].enabled;
-	reg.cnt2_enalbed = cfg[1].enabled;
+	reg.cnt1_enabled = cfg[0].enabled;
+	reg.cnt2_enabled = cfg[1].enabled;
 
 }
 
@@ -99,7 +99,7 @@
 static void loongson2_cpu_start(void *args)
 {
 	/* Start all counters on current CPU */
-	if (reg.cnt1_enalbed || reg.cnt2_enalbed)
+	if (reg.cnt1_enabled || reg.cnt2_enabled)
 		write_c0_perfctrl(reg.ctrl);
 }
 
@@ -125,7 +125,7 @@
 	 */
 
 	/* Check whether the irq belongs to me */
-	enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
+	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
 	if (!enabled)
 		return IRQ_NONE;
 
@@ -136,12 +136,12 @@
 	spin_lock_irqsave(&sample_lock, flags);
 
 	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt1_enalbed)
+		if (reg.cnt1_enabled)
 			oprofile_add_sample(regs, 0);
 		counter1 = reg.reset_counter1;
 	}
 	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt2_enalbed)
+		if (reg.cnt2_enabled)
 			oprofile_add_sample(regs, 1);
 		counter2 = reg.reset_counter2;
 	}
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 109c95c..32548b5 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -385,6 +385,7 @@
 	unsigned long intr;
 	unsigned long value;
 	static char pciirqflag;
+	int ret;
 #if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
 	unsigned int	vpe_status;
 #endif
@@ -402,11 +403,13 @@
 	 * allocation assigns an interrupt handler to the interrupt.
 	 */
 	if (pciirqflag == 0) {
-		request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
+		ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
 				bpci_interrupt,
 				IRQF_SHARED | IRQF_DISABLED,
 				"PMC MSP PCI Host",
 				preg);
+		if (ret != 0)
+			return ret;
 		pciirqflag = ~0;
 	}
 
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 9aa8f29..c6851df 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -165,7 +165,7 @@
 	REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
 }
 
-static void ip27_send_ipi(const struct cpumask *mask, unsigned int action)
+static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index ba59839..4070268 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -117,10 +117,6 @@
 	unsigned long flags;
 	unsigned int irq_dirty;
 
-	if (cpumask_weight(mask) != 1) {
-		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return -1;
-	}
 	i = cpumask_first(mask);
 
 	/* Convert logical CPU to physical CPU */
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 637a194..15ea778 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -403,36 +403,31 @@
 static int sbprof_tb_open(struct inode *inode, struct file *filp)
 {
 	int minor;
-	int err = 0;
 
-	lock_kernel();
 	minor = iminor(inode);
-	if (minor != 0) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (minor != 0)
+		return -ENODEV;
 
-	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) {
-		err = -EBUSY;
-		goto out;
-	}
+	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
+		return -EBUSY;
 
 	memset(&sbp, 0, sizeof(struct sbprof_tb));
 	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
 	if (!sbp.sbprof_tbbuf) {
-		err = -ENOMEM;
-		goto out;
+		sbp.open = SB_CLOSED;
+		wmb();
+		return -ENOMEM;
 	}
+
 	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
 	init_waitqueue_head(&sbp.tb_sync);
 	init_waitqueue_head(&sbp.tb_read);
 	mutex_init(&sbp.lock);
 
 	sbp.open = SB_OPEN;
+	wmb();
 
-  out:
-	unlock_kernel();
-	return err;
+	return 0;
 }
 
 static int sbprof_tb_release(struct inode *inode, struct file *filp)
@@ -440,7 +435,7 @@
 	int minor;
 
 	minor = iminor(inode);
-	if (minor != 0 || !sbp.open)
+	if (minor != 0 || sbp.open != SB_CLOSED)
 		return -ENODEV;
 
 	mutex_lock(&sbp.lock);
@@ -449,7 +444,8 @@
 		sbprof_zbprof_stop();
 
 	vfree(sbp.sbprof_tbbuf);
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 
 	mutex_unlock(&sbp.lock);
 
@@ -583,7 +579,8 @@
 	}
 	tb_dev = dev;
 
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 	tb_period = zbbus_mhz * 10000LL;
 	pr_info(DEVNAME ": initialized - tb_period = %lld\n",
 		(long long) tb_period);
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 623ffc9..5277aac 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -106,7 +106,7 @@
 		break;
 	}
 	ts->tv_sec = sec;
-	tv->tv_nsec = 0;
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long sec)
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 76f41bd..10549dc 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -44,24 +44,8 @@
   RO_DATA(PAGE_SIZE)
 
   /* writeable */
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	}
-
-  .data_nosave : { NOSAVE_DATA; }
-
-  .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
-  .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
-
-  /* rarely changed data like cpu maps */
-  . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly)) {
-	READ_MOSTLY_DATA(32);
-	_edata = .;		/* End of data section */
-  }
-
-  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
+  RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+  _edata = .;
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
@@ -74,22 +58,8 @@
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT;
-	_einittext = .;
-  }
-  .init.data : { INIT_DATA; }
-  .setup.init : { INIT_SETUP(16); }
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  .con_initcall.init : { CON_INITCALL; }
-
-  SECURITY_INIT
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
   . = ALIGN(4);
   __alt_instructions = .;
   .altinstructions : { *(.altinstructions) }
@@ -100,8 +70,6 @@
 	.exit.text : { EXIT_TEXT; }
 	.exit.data : { EXIT_DATA; }
 
-  .init.ramfs : { INIT_RAM_FS; }
-
   PERCPU(32)
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index aea1784..775be27 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -77,13 +77,7 @@
 	 */
 	. = ALIGN(PAGE_SIZE);
 	data_start = .;
-	. = ALIGN(16);
-	/* Exception table */
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	NOTES
 
@@ -94,23 +88,8 @@
 		__stop___unwind = .;
 	}
 
-	/* rarely changed data like cpu maps */
-	. = ALIGN(16);
-	.data.read_mostly : {
-		*(.data.read_mostly)
-	}
-
-	. = ALIGN(L1_CACHE_BYTES);
 	/* Data */
-	.data : {
-		DATA_DATA
-		CONSTRUCTORS
-	}
-
-	. = ALIGN(L1_CACHE_BYTES);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
 	/* PA-RISC locks requires 16-byte alignment */
 	. = ALIGN(16);
@@ -118,17 +97,6 @@
 		*(.data.lock_aligned)
 	}
 
-	/* nosave data is really only used for software suspend...it's here
-	 * just in case we ever implement it
-	 */
-	. = ALIGN(PAGE_SIZE);
-	__nosave_begin = .;
-	.data_nosave : {
-		*(.data.nosave)
-	}
-	. = ALIGN(PAGE_SIZE);
-	__nosave_end = .;
-
 	/* End of data section */
 	_edata = .;
 
@@ -147,14 +115,6 @@
 	}
 	__bss_stop = .;
 
-
-	/* assembler code expects init_task to be 16k aligned */
-	. = ALIGN(16384);
-	/* init_task */
-	.data.init_task : {
-		*(.data.init_task)
-	}
-
 #ifdef CONFIG_64BIT
 	. = ALIGN(16);
 	/* Linkage tables */
@@ -172,64 +132,8 @@
 	/* reserve space for interrupt stack by aligning __init* to 16k */
 	. = ALIGN(16384);
 	__init_begin = .;
-	.init.text : { 
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
-
-	/* alternate instruction replacement.  This is a mechanism x86 uses
-	 * to detect the CPU type and replace generic instruction sequences
-	 * with CPU specific ones.  We don't currently do this in PA, but
-	 * it seems like a good idea...
-	 */
-	. = ALIGN(4);
-	.altinstructions : {
-		__alt_instructions = .;
-		*(.altinstructions)
-		__alt_instructions_end = .; 
-	} 
-	.altinstr_replacement : {
-		*(.altinstr_replacement)
-	} 
-
-	/* .exit.text is discard at runtime, not link time, to deal with references
-	 *  from .altinstructions and .eh_frame
-	 */
-	.exit.text : {
-		EXIT_TEXT
-	}
-	.exit.data : {
-		EXIT_DATA
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
+	INIT_TEXT_SECTION(16384)
+	INIT_DATA_SECTION(16)
 
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4fd4790..10a0a54 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -385,9 +385,15 @@
 
 config NODES_SHIFT
 	int
+	default "8" if PPC64
 	default "4"
 	depends on NEED_MULTIPLE_NODES
 
+config MAX_ACTIVE_REGIONS
+	int
+	default "256" if PPC64
+	default "32"
+
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 	depends on PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index aacf629..1a54a3b 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -164,6 +164,17 @@
 
 boot := arch/$(ARCH)/boot
 
+ifeq ($(CONFIG_RELOCATABLE),y)
+quiet_cmd_relocs_check = CALL    $<
+      cmd_relocs_check = perl $< "$(OBJDUMP)" "$(obj)/vmlinux"
+
+PHONY += relocs_check
+relocs_check: arch/powerpc/relocs_check.pl vmlinux
+	$(call cmd,relocs_check)
+
+zImage: relocs_check
+endif
+
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 9dade15..6d94d27 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -15,7 +15,16 @@
 
 	/* DMA operations on that device */
 	struct dma_map_ops	*dma_ops;
-	void			*dma_data;
+
+	/*
+	 * When an iommu is in use, dma_data is used as a ptr to the base of the
+	 * iommu_table.  Otherwise, it is a simple numerical offset.
+	 */
+	union {
+		dma_addr_t	dma_offset;
+		void		*iommu_table_base;
+	} dma_data;
+
 #ifdef CONFIG_SWIOTLB
 	dma_addr_t		max_direct_dma_addr;
 #endif
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index cb2ca41..e281dae 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -26,7 +26,6 @@
 extern void dma_direct_free_coherent(struct device *dev, size_t size,
 				     void *vaddr, dma_addr_t dma_handle);
 
-extern unsigned long get_dma_direct_offset(struct device *dev);
 
 #ifdef CONFIG_NOT_COHERENT_CACHE
 /*
@@ -90,6 +89,28 @@
 	dev->archdata.dma_ops = ops;
 }
 
+/*
+ * get_dma_offset()
+ *
+ * Get the dma offset on configurations where the dma address can be determined
+ * from the physical address by looking at a simple offset.  Direct dma and
+ * swiotlb use this function, but it is typically not used by implementations
+ * with an iommu.
+ */
+static inline dma_addr_t get_dma_offset(struct device *dev)
+{
+	if (dev)
+		return dev->archdata.dma_data.dma_offset;
+
+	return PCI_DRAM_OFFSET;
+}
+
+static inline void set_dma_offset(struct device *dev, dma_addr_t off)
+{
+	if (dev)
+		dev->archdata.dma_data.dma_offset = off;
+}
+
 /* this will be removed soon */
 #define flush_write_buffers()
 
@@ -181,12 +202,12 @@
 
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	return paddr + get_dma_direct_offset(dev);
+	return paddr + get_dma_offset(dev);
 }
 
 static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	return daddr - get_dma_direct_offset(dev);
+	return daddr - get_dma_offset(dev);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7464c0d..edfc980 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -70,6 +70,16 @@
 
 struct scatterlist;
 
+static inline void set_iommu_table_base(struct device *dev, void *base)
+{
+	dev->archdata.dma_data.iommu_table_base = base;
+}
+
+static inline void *get_iommu_table_base(struct device *dev)
+{
+	return dev->archdata.dma_data.iommu_table_base;
+}
+
 /* Frees table for an individual device node */
 extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
 
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index ccc68b5..5a9ede4 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -29,7 +29,7 @@
 void release_pmc_hardware(void);
 void ppc_enable_pmcs(void);
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #include <asm/lppaca.h>
 
 static inline void ppc_set_pmu_inuse(int inuse)
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
index 6c3e1f4..ec0b0b0 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -43,6 +43,7 @@
 #define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
 #define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
 #define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_SPECIAL	0x020	/* software: Special page */
 #define	_PAGE_RW	0x040	/* software: Writes permitted */
 #define	_PAGE_DIRTY	0x080	/* software: dirty page */
 #define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index 94e9797..dd5ea95 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -32,6 +32,7 @@
 #define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
 #define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
 #define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+#define _PAGE_SPECIAL	0x0008	/* SW entry, forced to 0 by the TLB miss */
 
 /* These five software bits must be masked out when the entry is loaded
  * into the TLB.
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index c3b6507..f2b3701 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -25,9 +25,6 @@
 #ifndef _PAGE_WRITETHRU
 #define _PAGE_WRITETHRU	0
 #endif
-#ifndef _PAGE_SPECIAL
-#define _PAGE_SPECIAL	0
-#endif
 #ifndef _PAGE_4K_PFN
 #define _PAGE_4K_PFN		0
 #endif
@@ -179,7 +176,5 @@
 #define HAVE_PAGE_AGP
 
 /* Advertise support for _PAGE_SPECIAL */
-#ifdef _PAGE_SPECIAL
 #define __HAVE_ARCH_PTE_SPECIAL
-#endif
 
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 87ddb3f..37771a5 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -18,7 +18,7 @@
 static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag)
 {
-	return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
+	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, device_to_mask(dev), flag,
 				    dev_to_node(dev));
 }
@@ -26,7 +26,7 @@
 static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle)
 {
-	iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -39,8 +39,8 @@
 				     enum dma_data_direction direction,
 				     struct dma_attrs *attrs)
 {
-	return iommu_map_page(dev, dev->archdata.dma_data, page, offset, size,
-			      device_to_mask(dev), direction, attrs);
+	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
+			      size, device_to_mask(dev), direction, attrs);
 }
 
 
@@ -48,7 +48,7 @@
 				 size_t size, enum dma_data_direction direction,
 				 struct dma_attrs *attrs)
 {
-	iommu_unmap_page(dev->archdata.dma_data, dma_handle, size, direction,
+	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
 			 attrs);
 }
 
@@ -57,7 +57,7 @@
 			    int nelems, enum dma_data_direction direction,
 			    struct dma_attrs *attrs)
 {
-	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+	return iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 			    device_to_mask(dev), direction, attrs);
 }
 
@@ -65,14 +65,14 @@
 		int nelems, enum dma_data_direction direction,
 		struct dma_attrs *attrs)
 {
-	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+	iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems, direction,
 		       attrs);
 }
 
 /* We support DMA to/from any memory page via the iommu */
 static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 {
-	struct iommu_table *tbl = dev->archdata.dma_data;
+	struct iommu_table *tbl = get_iommu_table_base(dev);
 
 	if (!tbl || tbl->it_offset > mask) {
 		printk(KERN_INFO
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 21b784d..6215062 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -21,13 +21,6 @@
  * default the offset is PCI_DRAM_OFFSET.
  */
 
-unsigned long get_dma_direct_offset(struct device *dev)
-{
-	if (dev)
-		return (unsigned long)dev->archdata.dma_data;
-
-	return PCI_DRAM_OFFSET;
-}
 
 void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, gfp_t flag)
@@ -37,7 +30,7 @@
 	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
 	if (ret == NULL)
 		return NULL;
-	*dma_handle += get_dma_direct_offset(dev);
+	*dma_handle += get_dma_offset(dev);
 	return ret;
 #else
 	struct page *page;
@@ -51,7 +44,7 @@
 		return NULL;
 	ret = page_address(page);
 	memset(ret, 0, size);
-	*dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
+	*dma_handle = virt_to_abs(ret) + get_dma_offset(dev);
 
 	return ret;
 #endif
@@ -75,7 +68,7 @@
 	int i;
 
 	for_each_sg(sgl, sg, nents, i) {
-		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+		sg->dma_address = sg_phys(sg) + get_dma_offset(dev);
 		sg->dma_length = sg->length;
 		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 	}
@@ -110,7 +103,7 @@
 {
 	BUG_ON(dir == DMA_NONE);
 	__dma_sync_page(page, offset, size, dir);
-	return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+	return page_to_phys(page) + offset + get_dma_offset(dev);
 }
 
 static inline void dma_direct_unmap_page(struct device *dev,
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 9048f96..24dcc0e 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -17,7 +17,6 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/thread_info.h>
-#include <asm/reg.h>
 #include <asm/exception-64e.h>
 #include <asm/bug.h>
 #include <asm/irqflags.h>
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index e9f4840..bb8209e 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1117,7 +1117,7 @@
 
 		/* Hook up default DMA ops */
 		sd->dma_ops = pci_dma_ops;
-		sd->dma_data = (void *)PCI_DRAM_OFFSET;
+		set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
 
 		/* Additional platform DMA/iommu setup */
 		if (ppc_md.pci_dma_dev_setup)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 0a32164..1168c5f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1165,7 +1165,22 @@
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long ret = PAGE_ALIGN(mm->brk + brk_rnd());
+	unsigned long base = mm->brk;
+	unsigned long ret;
+
+#ifdef CONFIG_PPC64
+	/*
+	 * If we are using 1TB segments and we are allowed to randomise
+	 * the heap, we can put it above 1TB so it is backed by a 1TB
+	 * segment. Otherwise the heap will be in the bottom 1TB
+	 * which always uses 256MB segments and this may result in a
+	 * performance penalty.
+	 */
+	if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T))
+		base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T);
+#endif
+
+	ret = PAGE_ALIGN(base + brk_rnd());
 
 	if (ret < mm->brk)
 		return mm->brk;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 864334b..bafac2e 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -800,7 +800,7 @@
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
 		/* try calling the ibm,client-architecture-support method */
-		prom_printf("Calling ibm,client-architecture...");
+		prom_printf("Calling ibm,client-architecture-support...");
 		if (call_prom_ret("call-method", 3, 2, &ret,
 				  ADDR("ibm,client-architecture-support"),
 				  root,
@@ -814,6 +814,7 @@
 			return;
 		}
 		call_prom("close", 1, 0, root);
+		prom_printf(" not implemented\n");
 	}
 
 	/* no ibm,client-architecture-support call, try the old way */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 3faaf29..94e2df3 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -241,6 +241,13 @@
 	}
 
 	/*
+	 * Put vDSO base into mm struct. We need to do this before calling
+	 * install_special_mapping or the perf counter mmap tracking code
+	 * will fail to recognise it as a vDSO (since arch_vma_name fails).
+	 */
+	current->mm->context.vdso_base = vdso_base;
+
+	/*
 	 * our vma flags don't have VM_WRITE so by default, the process isn't
 	 * allowed to write those pages.
 	 * gdb can break that with ptrace interface, and thus trigger COW on
@@ -260,11 +267,10 @@
 				     VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
 				     VM_ALWAYSDUMP,
 				     vdso_pagelist);
-	if (rc)
+	if (rc) {
+		current->mm->context.vdso_base = 0;
 		goto fail_mmapsem;
-
-	/* Put vDSO base into mm struct */
-	current->mm->context.vdso_base = vdso_base;
+	}
 
 	up_write(&mm->mmap_sem);
 	return 0;
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index bc7b41e..77f6421 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1054,6 +1054,8 @@
 		return NULL;
 
 	tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
+	if (tbl == NULL)
+		return NULL;
 
 	of_parse_dma_window(dev->dev.archdata.of_node, dma_window,
 			    &tbl->it_index, &offset, &size);
@@ -1233,7 +1235,7 @@
 		vio_cmo_set_dma_ops(viodev);
 	else
 		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
-	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
+	set_iommu_table_base(&viodev->dev, vio_build_iommu_table(viodev));
 	set_dev_node(&viodev->dev, of_node_to_nid(of_node));
 
 	/* init generic 'struct device' fields: */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 58da407..f564293 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
+#include <asm/thread_info.h>
 
 ENTRY(_stext)
 
@@ -71,12 +72,7 @@
 	/* Read-only data */
 	RODATA
 
-	/* Exception & bug tables */
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(0)
 
 	NOTES :kernel :notes
 
@@ -93,12 +89,7 @@
  */
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
-
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	} :kernel
+	INIT_TEXT_SECTION(PAGE_SIZE) :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -122,23 +113,16 @@
 #endif
 	}
 
-	. = ALIGN(16);
 	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
+		INIT_SETUP(16)
 	}
 
 	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-		}
+		INIT_CALLS
+	}
 
 	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 
 	SECURITY_INIT
@@ -169,14 +153,10 @@
 		__stop___fw_ftr_fixup = .;
 	}
 #endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
 	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
+		INIT_RAM_FS
 	}
-#endif
+
 	PERCPU(PAGE_SIZE)
 
 	. = ALIGN(8);
@@ -240,36 +220,24 @@
 #endif
 
 	/* The initial task and kernel stack */
-#ifdef CONFIG_PPC32
-	. = ALIGN(8192);
-#else
-	. = ALIGN(16384);
-#endif
 	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-		*(.data.page_aligned)
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-		*(.data.cacheline_aligned)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-		*(.data.read_mostly)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
+		NOSAVE_DATA
 	}
 
 	. = ALIGN(PAGE_SIZE);
@@ -280,14 +248,7 @@
  * And finally the bss
  */
 
-	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-		__bss_start = .;
-		*(.sbss) *(.scommon)
-		*(.dynbss)
-		*(.bss)
-		*(COMMON)
-		__bss_stop = .;
-	}
+	BSS_SECTION(0, 0, 0)
 
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 83f1551..5304093 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,8 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
+#include "mmu_decl.h"
+
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 #ifdef CONFIG_SMP
@@ -166,7 +168,7 @@
  * support falls into the same category.
  */
 
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 {
 	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 	if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
@@ -175,6 +177,17 @@
 		if (!pg)
 			return pte;
 		if (!test_bit(PG_arch_1, &pg->flags)) {
+#ifdef CONFIG_8xx
+			/* On 8xx, cache control instructions (particularly
+			 * "dcbst" from flush_dcache_icache) fault as write
+			 * operation if there is an unpopulated TLB entry
+			 * for the address in question. To workaround that,
+			 * we invalidate the TLB here, thus avoiding dcbst
+			 * misbehaviour.
+			 */
+			/* 8xx doesn't care about PID, size or ind args */
+			_tlbil_va(addr, 0, 0, 0);
+#endif /* CONFIG_8xx */
 			flush_dcache_icache_page(pg);
 			set_bit(PG_arch_1, &pg->flags);
 		}
@@ -194,7 +207,7 @@
  * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
  * instead we "filter out" the exec permission for non clean pages.
  */
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 {
 	struct page *pg;
 
@@ -276,7 +289,7 @@
 	 * this context might not have been activated yet when this
 	 * is called.
 	 */
-	pte = set_pte_filter(pte);
+	pte = set_pte_filter(pte, addr);
 
 	/* Perform the setting of the PTE */
 	__set_pte_at(mm, addr, ptep, pte, 0);
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index ef1cccf..f288279 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -18,7 +18,6 @@
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
 #include <asm/pgtable.h>
-#include <asm/reg.h>
 #include <asm/exception-64e.h>
 #include <asm/ppc-opcode.h>
 
diff --git a/arch/powerpc/platforms/cell/beat_iommu.c b/arch/powerpc/platforms/cell/beat_iommu.c
index 93b0efd..39d361c 100644
--- a/arch/powerpc/platforms/cell/beat_iommu.c
+++ b/arch/powerpc/platforms/cell/beat_iommu.c
@@ -77,7 +77,7 @@
 static void celleb_dma_dev_setup(struct device *dev)
 {
 	dev->archdata.dma_ops = get_pci_dma_ops();
-	dev->archdata.dma_data = (void *)celleb_dma_direct_offset;
+	set_dma_offset(dev, celleb_dma_direct_offset);
 }
 
 static void celleb_pci_dma_dev_setup(struct pci_dev *pdev)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 416db17..ca5bfdf 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -657,15 +657,13 @@
 
 static void cell_dma_dev_setup(struct device *dev)
 {
-	struct dev_archdata *archdata = &dev->archdata;
-
 	/* Order is important here, these are not mutually exclusive */
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
 		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
-		archdata->dma_data = cell_get_iommu_table(dev);
+		set_iommu_table_base(dev, cell_get_iommu_table(dev));
 	else if (get_pci_dma_ops() == &dma_direct_ops)
-		archdata->dma_data = (void *)cell_dma_direct_offset;
+		set_dma_offset(dev, cell_dma_direct_offset);
 	else
 		BUG();
 }
@@ -973,11 +971,10 @@
 
 static void cell_dma_dev_setup_fixed(struct device *dev)
 {
-	struct dev_archdata *archdata = &dev->archdata;
 	u64 addr;
 
 	addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
-	archdata->dma_data = (void *)addr;
+	set_dma_offset(dev, addr);
 
 	dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 8f079b8..9613094 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -309,7 +309,7 @@
 	return len;
 }
 
-static struct vm_operations_struct spufs_mem_mmap_vmops = {
+static const struct vm_operations_struct spufs_mem_mmap_vmops = {
 	.fault = spufs_mem_mmap_fault,
 	.access = spufs_mem_mmap_access,
 };
@@ -436,7 +436,7 @@
 	return spufs_ps_fault(vma, vmf, 0x4000, SPUFS_CNTL_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_cntl_mmap_vmops = {
+static const struct vm_operations_struct spufs_cntl_mmap_vmops = {
 	.fault = spufs_cntl_mmap_fault,
 };
 
@@ -1143,7 +1143,7 @@
 #endif
 }
 
-static struct vm_operations_struct spufs_signal1_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal1_mmap_vmops = {
 	.fault = spufs_signal1_mmap_fault,
 };
 
@@ -1279,7 +1279,7 @@
 #endif
 }
 
-static struct vm_operations_struct spufs_signal2_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal2_mmap_vmops = {
 	.fault = spufs_signal2_mmap_fault,
 };
 
@@ -1397,7 +1397,7 @@
 	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_MSS_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_mss_mmap_vmops = {
+static const struct vm_operations_struct spufs_mss_mmap_vmops = {
 	.fault = spufs_mss_mmap_fault,
 };
 
@@ -1458,7 +1458,7 @@
 	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_PS_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_psmap_mmap_vmops = {
+static const struct vm_operations_struct spufs_psmap_mmap_vmops = {
 	.fault = spufs_psmap_mmap_fault,
 };
 
@@ -1517,7 +1517,7 @@
 	return spufs_ps_fault(vma, vmf, 0x3000, SPUFS_MFC_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_mfc_mmap_vmops = {
+static const struct vm_operations_struct spufs_mfc_mmap_vmops = {
 	.fault = spufs_mfc_mmap_fault,
 };
 
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 6c1e101..9d53cb4 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -193,7 +193,7 @@
 		pdn->iommu_table = iommu_init_table(tbl, -1);
 	else
 		kfree(tbl);
-	pdev->dev.archdata.dma_data = pdn->iommu_table;
+	set_iommu_table_base(&pdev->dev, pdn->iommu_table);
 }
 #else
 #define pci_dma_dev_setup_iseries	NULL
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index a0ff03a..7b1d608 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -189,7 +189,7 @@
 	}
 #endif
 
-	dev->dev.archdata.dma_data = &iommu_table_iobmap;
+	set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
 }
 
 static void pci_dma_bus_setup_null(struct pci_bus *b) { }
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 661c8e0..1a0000a 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -482,7 +482,7 @@
 				   phb->node);
 		iommu_table_setparms(phb, dn, tbl);
 		PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
-		dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
 		return;
 	}
 
@@ -494,7 +494,7 @@
 		dn = dn->parent;
 
 	if (dn && PCI_DN(dn))
-		dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
 	else
 		printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
 		       pci_name(dev));
@@ -538,7 +538,7 @@
 	 */
 	if (dma_window == NULL || pdn->parent == NULL) {
 		pr_debug("  no dma window for device, linking to parent\n");
-		dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(pdn)->iommu_table);
 		return;
 	}
 
@@ -554,7 +554,7 @@
 		pr_debug("  found DMA window, table: %p\n", pci->iommu_table);
 	}
 
-	dev->dev.archdata.dma_data = pci->iommu_table;
+	set_iommu_table_base(&dev->dev, pci->iommu_table);
 }
 #else  /* CONFIG_PCI */
 #define pci_dma_bus_setup_pSeries	NULL
diff --git a/arch/powerpc/relocs_check.pl b/arch/powerpc/relocs_check.pl
new file mode 100755
index 0000000..d257109
--- /dev/null
+++ b/arch/powerpc/relocs_check.pl
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+
+# Copyright © 2009 IBM Corporation
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+
+# This script checks the relcoations of a vmlinux for "suspicious"
+# relocations.
+
+use strict;
+use warnings;
+
+if ($#ARGV != 1) {
+	die "$0 [path to objdump] [path to vmlinux]\n";
+}
+
+# Have Kbuild supply the path to objdump so we handle cross compilation.
+my $objdump = shift;
+my $vmlinux = shift;
+my $bad_relocs_count = 0;
+my $bad_relocs = "";
+my $old_binutils = 0;
+
+open(FD, "$objdump -R $vmlinux|") or die;
+while (<FD>) {
+	study $_;
+
+	# Only look at relcoation lines.
+	next if (!/\s+R_/);
+
+	# These relocations are okay
+	next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
+	         /R_PPC64_ADDR64\s+mach_/);
+
+	# If we see this type of relcoation it's an idication that
+	# we /may/ be using an old version of binutils.
+	if (/R_PPC64_UADDR64/) {
+		$old_binutils++;
+	}
+
+	$bad_relocs_count++;
+	$bad_relocs .= $_;
+}
+
+if ($bad_relocs_count) {
+	print "WARNING: $bad_relocs_count bad relocations\n";
+	print $bad_relocs;
+}
+
+if ($old_binutils) {
+	print "WARNING: You need at binutils >= 2.19 to build a ".
+	      "CONFIG_RELCOATABLE kernel\n";
+}
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 89639ec..ae3c4db 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -297,7 +297,7 @@
 	/* We only have one iommu table on the mac for now, which makes
 	 * things simple. Setup all PCI devices to point to this table
 	 */
-	dev->dev.archdata.dma_data = &iommu_table_dart;
+	set_iommu_table_base(&dev->dev, &iommu_table_dart);
 }
 
 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0e09a45..c6f0a71b 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -335,6 +335,16 @@
 }
 #endif
 
+static inline int unrecoverable_excp(struct pt_regs *regs)
+{
+#ifdef CONFIG_4xx
+	/* We have no MSR_RI bit on 4xx, so we simply return false */
+	return 0;
+#else
+	return ((regs->msr & MSR_RI) == 0);
+#endif
+}
+
 static int xmon_core(struct pt_regs *regs, int fromipi)
 {
 	int cmd = 0;
@@ -388,7 +398,7 @@
 	bp = NULL;
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF))
 		bp = at_breakpoint(regs->nip);
-	if (bp || (regs->msr & MSR_RI) == 0)
+	if (bp || unrecoverable_excp(regs))
 		fromipi = 0;
 
 	if (!fromipi) {
@@ -399,7 +409,7 @@
 			       cpu, BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
-		if ((regs->msr & MSR_RI) == 0)
+		if (unrecoverable_excp(regs))
 			printf("WARNING: exception is not recoverable, "
 			       "can't continue\n");
 		release_output_lock();
@@ -490,7 +500,7 @@
 			printf("Stopped at breakpoint %x (", BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
-		if ((regs->msr & MSR_RI) == 0)
+		if (unrecoverable_excp(regs))
 			printf("WARNING: exception is not recoverable, "
 			       "can't continue\n");
 		remove_bpts();
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 96bc169..5f9881e1 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -121,6 +121,7 @@
 struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.ether_link_active_low = 1
 };
 
 static struct platform_device sh_eth_device = {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 00973e0..e78c3be 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -22,6 +22,7 @@
 #include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
+#include <sound/sh_fsi.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
@@ -255,6 +256,65 @@
 	},
 };
 
+/* FSI */
+/*
+ * FSI-A use external clock which came from ak464x.
+ * So, we should change parent of fsi
+ */
+#define FCLKACR		0xa4150008
+static void fsimck_init(struct clk *clk)
+{
+	u32 status = ctrl_inl(clk->enable_reg);
+
+	/* use external clock */
+	status &= ~0x000000ff;
+	status |= 0x00000080;
+	ctrl_outl(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+	.init = fsimck_init,
+};
+
+static struct clk fsimcka_clk = {
+	.name		= "fsimcka_clk",
+	.id		= -1,
+	.ops		= &fsimck_clk_ops,
+	.enable_reg	= (void __iomem *)FCLKACR,
+	.rate		= 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+	.porta_flags = SH_FSI_BRS_INV |
+		       SH_FSI_OUT_SLAVE_MODE |
+		       SH_FSI_IN_SLAVE_MODE |
+		       SH_FSI_OFMT(PCM) |
+		       SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 108,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
@@ -399,6 +459,7 @@
 	&sh_eth_device,
 	&sh7724_usb0_host_device,
 	&sh7724_usb1_gadget_device,
+	&fsi_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -466,11 +527,13 @@
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+	struct clk *fsia_clk;
 
 	/* Reset Release */
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
+		    (1 << 7)  | /* AK4643 */
 		    (1 << 12) | /* USB0 */
 		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
@@ -609,6 +672,32 @@
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKB,    NULL);
+	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIOASD,    NULL);
+	gpio_request(GPIO_FN_FSIIABCK,   NULL);
+	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOABCK,   NULL);
+	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+	gpio_request(GPIO_FN_FSIIBSD,    NULL);
+	gpio_request(GPIO_FN_FSIOBSD,    NULL);
+	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
+
+	/* change parent of FSI A */
+	fsia_clk = clk_get(NULL, "fsia_clk");
+	clk_register(&fsimcka_clk);
+	clk_set_parent(fsia_clk, &fsimcka_clk);
+	clk_set_rate(fsia_clk, 11000);
+	clk_set_rate(&fsimcka_clk, 11000);
+	clk_put(fsia_clk);
+
 	/*
 	 * enable SH-Eth
 	 *
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 6c38a43..2f78d01 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:04:11 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:22:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -51,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,18 +98,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -107,6 +118,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,7 +150,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -169,6 +184,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 CONFIG_CPU_SUBTYPE_SH7723=y
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 
 #
@@ -316,7 +334,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -364,6 +388,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -393,6 +418,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -400,7 +426,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -413,6 +438,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +448,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -480,6 +506,7 @@
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -583,7 +610,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -637,12 +663,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -726,6 +750,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -736,6 +761,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -757,9 +783,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -780,6 +803,11 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -804,11 +832,15 @@
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -828,8 +860,12 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -957,6 +993,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -992,6 +1030,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1003,6 +1042,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1056,8 +1096,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1122,7 +1164,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1202,6 +1243,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1212,8 +1254,11 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1221,6 +1266,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1234,7 +1280,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1275,11 +1320,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1341,5 +1388,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 95717a0..aedbd4f 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:24:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:07 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -86,19 +96,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -108,6 +119,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -120,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -218,6 +234,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -322,7 +339,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
 
 #
@@ -395,6 +413,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -424,6 +443,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -431,7 +451,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -444,6 +463,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -496,7 +516,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -561,10 +585,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -605,13 +626,14 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -675,11 +697,15 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -716,6 +742,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -807,7 +834,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -861,8 +887,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -922,7 +950,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -949,6 +976,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -958,8 +986,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -967,6 +998,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -980,7 +1012,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1012,11 +1043,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1079,5 +1112,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
index 9a22c64..0774924 100644
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Tue Sep  8 13:56:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -59,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -79,15 +80,9 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -107,20 +102,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -237,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -319,7 +314,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
@@ -382,6 +378,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -422,6 +419,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -530,10 +528,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -625,6 +620,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -657,9 +653,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -693,11 +686,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -717,6 +713,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -771,6 +768,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -875,6 +873,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
@@ -975,6 +974,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -989,7 +989,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 2050a76..ac64697 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Wed Aug 26 09:09:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:45:39 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -60,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -97,20 +98,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -232,6 +232,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +315,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
 
 #
@@ -388,6 +390,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -417,6 +420,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -424,7 +428,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -437,6 +440,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -446,9 +450,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -504,6 +508,7 @@
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -666,10 +671,7 @@
 # CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -713,11 +715,15 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
@@ -771,6 +777,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -804,9 +811,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -856,11 +860,15 @@
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -880,8 +888,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -936,8 +946,10 @@
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_V4L_USB_DRIVERS is not set
 CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
 # CONFIG_USB_MR800 is not set
 # CONFIG_RADIO_TEA5764 is not set
 # CONFIG_DAB is not set
@@ -1003,7 +1015,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1026,6 +1037,7 @@
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1070,6 +1082,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -1161,6 +1174,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1208,6 +1223,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1265,6 +1281,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1329,7 +1346,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1409,6 +1425,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1423,7 +1440,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1446,7 +1463,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1487,11 +1503,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index 497414c..86c9bc0 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:35 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,17 +39,24 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
@@ -70,18 +80,19 @@
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -89,6 +100,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
@@ -125,6 +140,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,7 +181,6 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -173,6 +188,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -250,7 +266,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -321,11 +338,14 @@
 # CONFIG_R3964 is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -409,6 +429,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -416,8 +437,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -425,6 +449,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -449,4 +474,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 77684ed..4c0f82b 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:55 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:30 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="_edosk7760"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -51,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -91,19 +101,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -112,6 +123,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -124,7 +139,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -171,6 +186,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -216,6 +232,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -304,7 +321,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x02000000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
 
 #
@@ -367,6 +385,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -396,6 +415,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -403,7 +423,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -416,6 +435,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -426,9 +446,9 @@
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -563,10 +583,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -649,6 +666,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -659,6 +677,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH7760=y
 # CONFIG_I2C_SH_MOBILE is not set
@@ -680,20 +699,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -712,8 +732,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -837,8 +859,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -900,7 +924,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -974,6 +997,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1010,18 +1034,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1029,6 +1058,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1045,11 +1075,11 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1064,7 +1094,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -1100,11 +1129,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1168,5 +1199,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index 881128e..9b78551 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:27:21 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:58:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,19 +102,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +142,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +232,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +239,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +321,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
 
 #
@@ -371,6 +390,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +432,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -421,9 +442,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -477,6 +498,7 @@
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -554,7 +576,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -610,10 +631,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -705,11 +723,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -819,6 +841,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -888,6 +911,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -930,8 +954,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -997,7 +1023,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1071,6 +1096,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1082,11 +1108,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1096,6 +1126,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1109,7 +1140,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1141,11 +1171,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1208,5 +1240,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 3249d46..f59be44 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:12 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:59:45 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
@@ -46,11 +55,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,18 +91,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -100,6 +111,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -107,7 +122,7 @@
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,6 +169,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -199,6 +215,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -288,7 +305,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -322,6 +340,7 @@
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
 # CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
@@ -390,7 +409,6 @@
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -399,6 +417,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -428,13 +447,14 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -452,6 +472,7 @@
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -507,11 +528,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -663,7 +688,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -725,7 +752,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -782,6 +808,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -791,8 +818,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -800,6 +830,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -813,7 +844,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -854,11 +884,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -920,4 +952,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
index c0f9263..02590e1 100644
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:09:16 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:01:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -58,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -78,15 +79,9 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -106,20 +101,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -173,6 +167,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -219,6 +214,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -301,7 +297,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 quiet"
 
 #
@@ -324,6 +321,7 @@
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -362,6 +360,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -402,6 +401,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -489,6 +489,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -520,9 +521,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -556,11 +554,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -580,6 +581,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -718,6 +720,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -732,7 +735,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index cef6131..8ae65d2 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 21:58:52 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:54:22 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -60,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -102,20 +103,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -190,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -236,6 +237,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -319,7 +321,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
 
 #
@@ -343,6 +346,7 @@
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -383,6 +387,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -423,6 +428,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -432,9 +438,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -500,7 +506,12 @@
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 # CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
 
 #
 # LPDDR flash memory drivers
@@ -564,11 +575,15 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
@@ -621,6 +636,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -653,9 +669,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -689,11 +702,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -713,6 +729,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -856,6 +873,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -941,6 +960,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1002,6 +1022,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1016,7 +1037,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index ba05739..c2a9a39 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:45 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:05:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,19 +93,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -116,7 +131,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +178,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -208,6 +224,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -411,6 +429,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -442,6 +461,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -449,7 +469,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -462,6 +481,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -631,6 +651,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -653,7 +674,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -729,6 +754,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -754,10 +780,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -868,10 +891,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -886,9 +919,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -910,6 +941,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -928,11 +960,11 @@
 CONFIG_FONT_8x16=y
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -961,6 +993,7 @@
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
@@ -1011,6 +1044,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1177,8 +1211,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1251,7 +1287,6 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1331,6 +1366,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1340,8 +1376,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1350,6 +1389,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1363,7 +1403,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1395,11 +1434,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1462,5 +1503,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index c0bc2fd..ec0c0b4 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:29:50 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:09:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,19 +93,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -116,7 +131,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +178,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -208,6 +224,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 
 #
@@ -411,6 +429,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -440,6 +459,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -447,7 +467,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -460,6 +479,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -572,12 +592,14 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -599,6 +621,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -627,6 +650,7 @@
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -645,7 +669,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -725,6 +753,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -750,10 +779,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -863,10 +889,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -881,9 +917,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -905,6 +939,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -923,7 +958,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1021,8 +1055,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1089,7 +1125,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1155,6 +1190,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1164,8 +1200,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1174,6 +1213,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1187,7 +1227,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1219,11 +1258,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1286,5 +1327,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index c5859e8..79091e3 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:30:31 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:10:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
@@ -91,18 +101,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -306,7 +323,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -368,6 +386,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -397,6 +416,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -404,7 +424,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -417,6 +436,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -428,9 +448,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -589,10 +609,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -631,13 +648,15 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -701,6 +720,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -721,11 +745,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -829,8 +856,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -900,7 +929,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -976,6 +1004,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1006,24 +1035,30 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1036,16 +1071,15 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1077,5 +1111,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e5a21e1..6bb5976 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:31:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:14:35 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -87,18 +97,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -106,6 +117,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +175,7 @@
 CONFIG_CPU_SUBTYPE_SH4_202=y
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -211,6 +227,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 
 #
@@ -364,6 +382,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -393,6 +412,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -400,7 +420,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -413,6 +432,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -499,10 +519,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -561,10 +578,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -575,9 +602,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -662,8 +687,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -726,12 +753,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -803,6 +830,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -812,8 +840,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -821,6 +852,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -834,7 +866,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -875,11 +906,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -943,5 +976,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index b18cfd3..6501828 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:17:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,19 +99,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -111,6 +123,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -122,7 +139,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,7 +155,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +242,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -308,7 +327,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
@@ -328,7 +348,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -376,6 +402,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -406,6 +433,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -414,7 +442,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -427,6 +454,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -436,9 +464,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -585,7 +613,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -621,10 +648,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -659,14 +683,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -715,6 +744,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -725,6 +755,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -746,15 +777,17 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -777,11 +810,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -801,8 +837,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -922,7 +960,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -952,13 +989,13 @@
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
-CONFIG_SUPERH_BUILT_IN_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
@@ -1017,6 +1054,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1064,8 +1102,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1126,7 +1166,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1161,6 +1200,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1172,11 +1212,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1188,6 +1232,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1201,7 +1246,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER2=y
@@ -1240,11 +1284,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1308,5 +1354,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index 67edd3f..7fc1952 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:33:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:20:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -91,18 +101,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -302,7 +319,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
 
 #
@@ -363,6 +381,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +422,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -414,9 +434,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -577,10 +597,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -666,11 +683,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -770,8 +791,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -841,7 +864,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -877,6 +899,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -916,18 +939,23 @@
 # CONFIG_DEBUG_LIST is not set
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -935,6 +963,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -947,16 +976,15 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4000150
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -987,5 +1015,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 107a8e3..903b021 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:34:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:24:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,20 +102,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -115,6 +127,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -126,7 +143,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -174,6 +191,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -229,6 +247,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -315,7 +334,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -396,6 +416,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -428,6 +449,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -436,7 +458,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -449,6 +470,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -460,9 +482,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -513,6 +535,7 @@
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -651,11 +674,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -677,6 +702,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -704,6 +730,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -722,7 +749,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -804,6 +835,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -829,10 +861,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -873,13 +902,17 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -933,6 +966,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -961,6 +995,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -987,19 +1022,26 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1049,6 +1091,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1060,7 +1103,6 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -1081,14 +1123,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1101,11 +1146,11 @@
 # CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1169,6 +1214,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1221,8 +1267,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1289,12 +1337,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1370,6 +1418,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1404,21 +1453,27 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1427,6 +1482,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1445,11 +1501,11 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1464,7 +1520,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1506,11 +1561,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1573,5 +1630,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 8a3dc30..27ff46c 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:37:20 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:29:23 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,6 +44,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -56,12 +65,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,20 +102,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -117,6 +128,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -129,7 +145,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -178,6 +194,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -231,7 +248,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -239,6 +255,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -338,7 +355,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -419,6 +437,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -452,6 +471,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -460,7 +480,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -473,6 +492,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -591,11 +611,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -617,6 +639,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -644,6 +667,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -662,7 +686,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -721,6 +749,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -746,10 +775,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -790,14 +816,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -851,6 +882,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -879,6 +911,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
@@ -906,15 +939,17 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -935,14 +970,24 @@
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -993,6 +1038,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1004,9 +1050,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1026,14 +1070,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1099,11 +1146,11 @@
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1167,6 +1214,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1219,8 +1267,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1286,12 +1336,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1367,6 +1417,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1401,22 +1452,29 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1425,6 +1483,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1442,11 +1501,11 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1461,7 +1520,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1503,11 +1561,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1571,5 +1631,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 55c3656..c40db12 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:39:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:34:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -45,11 +54,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -86,19 +96,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -285,7 +303,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
 #
@@ -309,6 +328,7 @@
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 # CONFIG_NET is not set
@@ -327,9 +347,9 @@
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -498,6 +518,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -597,7 +622,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -632,7 +659,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -668,7 +694,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -686,6 +711,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -698,11 +724,15 @@
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -712,6 +742,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -741,4 +772,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 69e6199..5cabdb3 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:40:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:35:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,19 +103,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +141,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -172,6 +189,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -308,7 +326,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
 #
@@ -332,6 +351,7 @@
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
@@ -373,6 +393,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +424,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -410,7 +432,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -432,9 +453,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -591,10 +612,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -679,6 +697,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -699,6 +722,10 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -741,7 +768,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -764,6 +790,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -811,6 +838,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -954,8 +982,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -990,7 +1020,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -1016,7 +1045,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1090,6 +1118,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1129,22 +1158,28 @@
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1152,6 +1187,7 @@
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1170,10 +1206,10 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
 CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_BOOTMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1203,5 +1239,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index c6e9b1c..f521e82 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:42:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:36:25 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,20 +94,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +228,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +322,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
 
 #
@@ -378,6 +398,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -408,6 +429,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -416,7 +438,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -429,6 +450,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -542,11 +564,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -568,6 +592,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -595,6 +620,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -613,7 +639,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -673,6 +703,7 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -694,6 +725,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -719,10 +751,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -840,10 +869,20 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -862,9 +901,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -880,12 +917,15 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -969,6 +1009,7 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1071,7 +1112,6 @@
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1094,6 +1134,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1142,6 +1183,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1213,6 +1255,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1252,6 +1295,7 @@
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1293,8 +1337,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1357,7 +1403,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1423,6 +1468,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1434,11 +1480,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1450,6 +1500,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1463,7 +1514,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1495,11 +1545,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1562,5 +1614,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index bc10469..a156cd1 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:19 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:39:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,20 +94,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +228,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +322,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
 
 #
@@ -378,6 +398,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -408,6 +429,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -416,7 +438,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -429,6 +450,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -438,9 +460,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -499,6 +521,7 @@
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -627,11 +650,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -653,6 +678,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -680,6 +706,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -698,7 +725,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -758,6 +789,7 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -779,6 +811,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -804,10 +837,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -925,10 +955,20 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -947,9 +987,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -965,12 +1003,15 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1054,6 +1095,7 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1156,7 +1198,6 @@
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1179,6 +1220,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1227,6 +1269,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1298,6 +1341,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1337,6 +1381,7 @@
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1378,8 +1423,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1443,7 +1490,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1509,6 +1555,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1520,11 +1567,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1536,6 +1587,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1549,7 +1601,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1581,11 +1632,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1648,5 +1701,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 753fb27..055536b 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:40:25 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="_SDK7780"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -88,20 +98,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -110,6 +121,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -122,7 +137,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -225,6 +241,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +331,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x01800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
 
 #
@@ -435,6 +453,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -496,6 +515,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -503,7 +523,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -516,6 +535,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -677,12 +697,14 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -704,6 +726,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -732,6 +755,7 @@
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -760,7 +784,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -804,10 +832,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -862,12 +887,13 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -875,6 +901,7 @@
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -947,6 +974,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -954,7 +986,6 @@
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -986,6 +1017,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1072,11 +1104,11 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1099,6 +1131,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1149,6 +1182,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1278,6 +1312,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1345,7 +1380,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1425,6 +1459,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1461,18 +1496,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1480,6 +1520,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1495,11 +1536,11 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1514,7 +1555,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -1550,11 +1590,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1617,5 +1659,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 8dd2f13..1cd1777 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:46:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:45:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -53,12 +62,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -105,19 +114,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -126,6 +137,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +153,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -185,6 +201,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -319,7 +336,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 
 #
@@ -389,6 +407,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -419,6 +438,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -426,7 +446,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -448,9 +467,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -588,10 +607,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -647,11 +663,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -746,8 +766,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -782,8 +804,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
 CONFIG_MISC_FILESYSTEMS=y
@@ -809,7 +829,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -846,6 +865,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -882,20 +902,27 @@
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -904,6 +931,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -920,10 +948,10 @@
 # CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -938,7 +966,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -974,11 +1001,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1046,5 +1075,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 18f46de..5531444 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:46:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,18 +98,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -108,6 +119,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,7 +150,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -169,6 +184,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,6 +230,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
@@ -316,7 +334,12 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -360,6 +383,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -389,6 +413,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -396,7 +421,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,9 +442,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -560,10 +584,7 @@
 CONFIG_MII=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -671,6 +692,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -681,6 +703,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -702,20 +725,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -734,8 +758,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -788,6 +814,7 @@
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -822,7 +849,6 @@
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -845,6 +871,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -877,6 +904,7 @@
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -891,6 +919,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 CONFIG_USB_ISP116X_HCD=y
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -990,8 +1019,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1028,8 +1059,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -1062,7 +1091,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1140,6 +1168,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1149,8 +1178,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1160,6 +1192,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1173,7 +1206,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1205,11 +1237,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1273,5 +1307,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 724bb77..6921b19 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:05 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,17 +40,24 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -73,31 +83,36 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,6 +159,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -262,7 +278,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -469,11 +486,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -507,7 +528,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -559,7 +579,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -594,7 +616,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
@@ -619,7 +640,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -637,6 +657,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -645,8 +666,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -654,6 +678,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -680,4 +705,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 6ca6a2f..3abb068 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:48:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:52 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,18 +93,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -102,6 +113,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +175,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -205,6 +221,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -289,7 +306,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -355,6 +373,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -384,6 +403,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -391,7 +411,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -409,9 +428,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -547,10 +566,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -642,10 +658,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -656,9 +682,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -692,7 +716,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -746,7 +769,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -815,7 +840,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -849,6 +873,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -857,8 +882,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -866,6 +894,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -878,7 +907,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -910,11 +938,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -979,5 +1009,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index b8aae11..1a43cfe 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:49:00 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:53:32 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,6 +39,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,18 +94,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -291,7 +308,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -368,6 +386,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -433,6 +452,7 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -440,7 +460,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -464,9 +483,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -597,7 +616,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -605,6 +623,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -658,10 +677,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -719,11 +735,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -828,8 +848,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -866,8 +888,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -900,7 +920,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -935,6 +954,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -964,24 +984,30 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -994,14 +1020,13 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1016,7 +1041,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1059,11 +1083,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1127,5 +1153,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index 306e21c..b8a3c8c 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:50:49 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:11 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,18 +99,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -109,6 +120,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -120,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -212,6 +228,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
 
 #
@@ -373,6 +391,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -438,6 +457,7 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -445,7 +465,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -469,9 +488,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -606,6 +625,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -621,10 +641,7 @@
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -672,12 +689,13 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -725,6 +743,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -762,7 +785,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -785,6 +807,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -831,6 +854,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -900,6 +924,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -961,8 +986,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1002,8 +1029,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -1036,7 +1061,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1095,6 +1119,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1124,24 +1149,30 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1154,14 +1185,13 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1176,7 +1206,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1219,11 +1248,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1287,5 +1318,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 6194382..d709b7f 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:54:24 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,19 +101,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -113,6 +124,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +141,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,7 +157,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -176,6 +192,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -233,6 +250,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -317,7 +335,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -336,7 +355,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -381,6 +406,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -410,6 +436,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -417,7 +444,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -430,6 +456,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -494,7 +521,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -502,6 +528,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -535,10 +562,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -577,12 +601,13 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -631,10 +656,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -645,9 +680,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -681,7 +714,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -778,8 +810,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -839,7 +873,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -866,6 +899,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -878,8 +912,11 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -889,6 +926,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -902,7 +940,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -934,11 +971,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1002,5 +1041,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3ee783a0..56b0b9f 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Mon Jun 29 16:28:43 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:50:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -42,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -54,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -91,20 +98,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -144,7 +150,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -178,6 +184,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -249,6 +257,8 @@
 #
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_7724_SOLUTION_ENGINE=y
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
 
 #
 # Timer and clock configuration
@@ -269,7 +279,10 @@
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=12
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
 
 #
 # Companion Chips
@@ -305,7 +318,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
 
 #
@@ -325,7 +339,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -373,6 +393,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -402,6 +423,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -409,7 +431,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -422,6 +443,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -431,9 +453,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -489,6 +511,7 @@
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -648,12 +671,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -697,14 +718,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -754,6 +780,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -764,6 +791,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -786,9 +814,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -838,11 +863,15 @@
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -862,8 +891,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -876,24 +907,24 @@
 CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER=m
 # CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEOBUF_GEN=y
 CONFIG_VIDEOBUF_DMA_CONTIG=y
@@ -904,6 +935,7 @@
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
 CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
@@ -919,15 +951,18 @@
 CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
 # CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
 # CONFIG_USB_GSPCA_CONEX is not set
 # CONFIG_USB_GSPCA_ETOMS is not set
 # CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
 # CONFIG_USB_GSPCA_MARS is not set
 # CONFIG_USB_GSPCA_MR97310A is not set
 # CONFIG_USB_GSPCA_OV519 is not set
 # CONFIG_USB_GSPCA_OV534 is not set
 # CONFIG_USB_GSPCA_PAC207 is not set
 # CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
 # CONFIG_USB_GSPCA_SONIXB is not set
 # CONFIG_USB_GSPCA_SONIXJ is not set
 # CONFIG_USB_GSPCA_SPCA500 is not set
@@ -957,6 +992,26 @@
 # CONFIG_USB_STKWEBCAM is not set
 # CONFIG_USB_S2255 is not set
 # CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
 # CONFIG_DAB is not set
 
 #
@@ -1017,10 +1072,80 @@
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_FSI_AK4642=y
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_SND_SOC_WM_HUBS=m
+CONFIG_SND_SOC_AD1836=m
+CONFIG_SND_SOC_AD1938=m
+CONFIG_SND_SOC_AD73311=m
+CONFIG_SND_SOC_AK4104=m
+CONFIG_SND_SOC_AK4535=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_PCM3008=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_SSM2602=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC26=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_UDA1380=m
+CONFIG_SND_SOC_WM8510=m
+CONFIG_SND_SOC_WM8523=m
+CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8728=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8750=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_WM8776=m
+CONFIG_SND_SOC_WM8900=m
+CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8940=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8961=m
+CONFIG_SND_SOC_WM8971=m
+CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8988=m
+CONFIG_SND_SOC_WM8990=m
+CONFIG_SND_SOC_WM8993=m
+CONFIG_SND_SOC_WM9081=m
+CONFIG_SND_SOC_MAX9877=m
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1043,6 +1168,7 @@
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1072,6 +1198,7 @@
 # CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -1086,9 +1213,11 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1151,9 +1280,46 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 
 #
 # OTG and related infrastructure
@@ -1176,6 +1342,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1223,6 +1391,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1279,6 +1448,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1343,7 +1513,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1423,6 +1592,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1433,8 +1603,11 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1442,6 +1615,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1455,7 +1629,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1496,11 +1669,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1562,5 +1737,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index 564bf7b..7bc926c 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:00:01 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:58:58 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -84,18 +94,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -291,7 +308,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -358,6 +376,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -387,6 +406,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -394,7 +414,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -412,9 +431,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -563,7 +582,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -599,10 +617,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -665,10 +680,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -679,9 +704,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -766,8 +789,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -838,7 +863,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -885,6 +909,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -894,8 +919,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -903,6 +931,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -916,7 +945,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -948,11 +976,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1016,5 +1046,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index eb431c4..c20ae5e 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:02:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:01:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -87,18 +97,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -107,6 +118,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +133,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +180,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +226,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,38400"
 
 #
@@ -382,6 +400,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -411,6 +430,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -418,7 +438,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -436,9 +455,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -574,10 +593,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -632,10 +648,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -646,9 +672,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -734,8 +758,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -806,7 +832,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -833,6 +858,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -842,8 +868,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -851,6 +880,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -864,7 +894,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -896,11 +925,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -965,5 +996,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index 756beec..82baeef 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:03:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:03:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,19 +91,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -101,6 +112,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -112,7 +128,8 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -159,6 +176,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -199,7 +217,6 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -207,6 +224,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -287,8 +305,9 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00810000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
@@ -382,6 +401,7 @@
 # CONFIG_BT is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -389,7 +409,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -406,9 +425,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -549,6 +568,7 @@
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
@@ -587,11 +607,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -612,6 +634,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
@@ -630,6 +653,7 @@
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -648,8 +672,13 @@
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
@@ -724,10 +753,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -821,10 +847,19 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -833,7 +868,6 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -857,6 +891,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -937,11 +972,11 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -964,6 +999,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1009,6 +1045,7 @@
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1243,6 +1280,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1253,8 +1291,11 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1263,6 +1304,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1276,7 +1318,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1309,6 +1350,7 @@
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1371,5 +1413,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 7fedaae..dd0e890 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:04:41 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:07:14 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -53,11 +62,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -91,20 +101,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -126,7 +143,7 @@
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -218,6 +236,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -302,7 +321,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 
 #
@@ -382,6 +402,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +433,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -419,7 +441,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -432,6 +453,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
@@ -591,6 +613,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -603,7 +626,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -679,6 +706,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -704,10 +732,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -804,10 +829,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -822,9 +857,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -861,6 +894,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -879,7 +913,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -944,8 +977,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1011,12 +1046,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1108,6 +1143,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1119,11 +1155,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1134,6 +1174,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1147,7 +1188,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1189,11 +1229,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1259,5 +1301,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index c296ca5..662156e 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:13 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:11:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,18 +97,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -107,6 +118,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +181,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +227,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -292,7 +310,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -374,6 +393,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -440,6 +460,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -447,7 +468,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -469,9 +489,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -605,10 +625,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -686,6 +703,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -723,7 +745,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -775,8 +796,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -813,8 +836,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -847,7 +868,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -874,6 +894,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -883,8 +904,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -893,6 +917,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -906,7 +931,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -938,11 +962,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1006,5 +1032,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
index ba26be1..e06719a 100644
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:14:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -46,14 +55,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -92,19 +99,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -113,13 +122,18 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -169,6 +183,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +229,6 @@
 #
 # Memory hotplug is currently incompatible with Software Suspend
 #
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +236,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -246,6 +261,8 @@
 # Board support
 #
 # CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
 
 #
 # Timer and clock configuration
@@ -318,7 +335,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -345,6 +363,7 @@
 CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -427,6 +446,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -437,6 +457,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -456,20 +477,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -488,8 +510,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -540,6 +564,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -587,7 +612,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -642,6 +669,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -654,11 +682,15 @@
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -668,6 +700,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -692,4 +725,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index b1d9b23..194ff70 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:07:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:15:37 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,19 +102,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +142,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +232,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +239,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +321,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
 
 #
@@ -371,6 +390,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -401,6 +421,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -409,7 +430,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -422,6 +442,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -431,9 +452,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -488,6 +509,7 @@
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -565,7 +587,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -621,10 +642,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -716,11 +734,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -830,6 +852,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -899,6 +922,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -923,6 +947,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -956,8 +982,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1022,7 +1050,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1096,6 +1123,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1107,11 +1135,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1121,6 +1153,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1134,7 +1167,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1166,11 +1198,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1232,5 +1266,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
index 426a88f..34bed55 100644
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ b/arch/sh/configs/sh7770_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:05 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:17:16 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,14 +54,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -91,19 +98,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -112,13 +121,18 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +180,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 CONFIG_CPU_SUBTYPE_SH7770=y
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,7 +225,6 @@
 #
 # Memory hotplug is currently incompatible with Software Suspend
 #
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -218,6 +232,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -313,7 +328,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -338,6 +354,7 @@
 CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -420,6 +437,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -430,6 +448,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -449,20 +468,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -481,8 +501,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -533,6 +555,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -580,7 +603,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -635,6 +660,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -647,11 +673,15 @@
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -661,6 +691,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -685,4 +716,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index ed316f6..51cbaed 100644
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:29 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:39:20 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,10 +43,17 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -53,11 +62,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -67,8 +77,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -79,7 +88,7 @@
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -93,28 +102,37 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_GCOV_KERNEL=y
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -127,7 +145,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +194,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +234,12 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -223,7 +248,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -231,6 +255,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -256,6 +281,7 @@
 #
 # CONFIG_SH_HIGHLANDER is not set
 CONFIG_SH_SH7785LCR=y
+# CONFIG_SH_SH7785LCR_PT is not set
 
 #
 # Timer and clock configuration
@@ -264,14 +290,29 @@
 CONFIG_SH_PCLK_FREQ=50000000
 CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
 #
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -299,12 +340,12 @@
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
 
 #
 # Boot options
@@ -312,7 +353,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -321,8 +363,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -339,8 +380,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 CONFIG_NET=y
 
 #
@@ -392,6 +438,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -414,6 +461,8 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -421,6 +470,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -429,7 +479,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -442,18 +491,17 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -538,7 +586,8 @@
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -561,7 +610,7 @@
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -591,6 +640,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -612,6 +662,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -639,6 +690,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -657,7 +709,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -690,6 +746,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -697,12 +754,7 @@
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -739,25 +791,42 @@
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -766,7 +835,12 @@
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -777,7 +851,7 @@
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -796,12 +870,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -809,6 +881,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -838,6 +911,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -864,21 +938,42 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_SH_WDT=y
+# CONFIG_SH_WDT_MMAP is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -896,14 +991,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -915,12 +1013,11 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -955,7 +1052,7 @@
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_CARMINE is not set
-CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
@@ -981,14 +1078,112 @@
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=y
+CONFIG_SND_OPL3_LIB_SEQ=y
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=y
+CONFIG_SND_OPL3_LIB=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+CONFIG_SND_CMIPCI=y
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1001,34 +1196,39 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
-# CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=m
 # CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_ZEROPLUS=m
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1040,13 +1240,14 @@
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1061,10 +1262,8 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
@@ -1133,7 +1332,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-CONFIG_USB_TEST=m
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1143,7 +1342,29 @@
 #
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1179,6 +1400,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1203,9 +1425,20 @@
 #
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
 
 #
 # TI VLYNQ
@@ -1225,13 +1458,15 @@
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1275,9 +1510,9 @@
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
@@ -1297,20 +1532,20 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
@@ -1373,85 +1608,69 @@
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_DEBUG_KERNEL is not set
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
+CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+CONFIG_IRQSOFF_TRACER=y
 # CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_SCHED_TRACER=y
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_STACK_TRACER=y
+CONFIG_KMEMTRACE=y
+CONFIG_WORKQUEUE_TRACER=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_SH_NO_BSS_INIT is not set
+CONFIG_DWARF_UNWINDER=y
+CONFIG_MCOUNT=y
 
 #
 # Security options
@@ -1465,7 +1684,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1507,11 +1725,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1556,7 +1776,7 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1573,5 +1793,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 004e6f5..8c2c47e 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:09:34 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:23:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -53,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,19 +102,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -115,6 +125,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -127,7 +141,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +239,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -306,7 +322,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -386,6 +403,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -415,6 +433,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -423,7 +442,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -436,6 +454,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -445,9 +464,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -585,6 +604,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -606,6 +626,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -633,6 +654,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -651,7 +673,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -684,6 +710,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -691,10 +718,7 @@
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -744,13 +768,17 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -803,6 +831,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -832,6 +861,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -858,20 +888,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -890,14 +921,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -982,7 +1016,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1005,6 +1038,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1055,6 +1089,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1173,6 +1208,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1224,8 +1260,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1291,12 +1329,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1372,6 +1410,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1407,18 +1446,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1426,6 +1470,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1440,11 +1485,11 @@
 # CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1459,7 +1504,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1501,11 +1545,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1567,5 +1613,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index ad7d609..92115e6 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:10:33 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:27:17 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,6 +39,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -46,11 +55,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -77,18 +87,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -96,12 +107,16 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +163,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -193,6 +209,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -274,7 +291,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00210000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
 
 #
@@ -339,6 +357,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -368,6 +387,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -375,7 +395,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -529,10 +548,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -591,11 +607,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -672,7 +692,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -709,8 +731,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_SYSFS is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -732,7 +752,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -768,6 +787,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -775,8 +795,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -785,6 +808,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -797,7 +821,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -828,11 +851,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -895,5 +920,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index 207b0c9..e3858d7 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:11:03 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:29:26 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,7 +31,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -55,12 +64,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,19 +120,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -135,6 +146,11 @@
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -147,7 +163,7 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -196,6 +212,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -256,6 +273,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -353,7 +371,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00010000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
 
 #
@@ -438,6 +457,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -489,6 +509,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -562,7 +583,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -570,6 +590,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -602,12 +623,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -675,6 +694,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -685,6 +705,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -706,9 +727,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -729,11 +747,15 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -762,8 +784,12 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -808,6 +834,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
 # CONFIG_USB_HWA_HCD is not set
@@ -862,6 +889,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
@@ -876,10 +904,11 @@
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -939,6 +968,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -950,6 +980,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1002,8 +1033,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1063,7 +1096,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1129,6 +1161,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1164,22 +1197,29 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1188,6 +1228,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1205,10 +1246,10 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1223,7 +1264,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1255,11 +1295,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1322,5 +1364,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index 2be2d75..cb919a0 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:03:04 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:33:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -57,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -95,21 +96,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -175,6 +175,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -220,6 +221,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -312,7 +314,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -374,6 +377,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +407,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -410,7 +415,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -618,10 +622,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -714,7 +715,6 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -736,6 +736,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -818,6 +819,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -882,7 +884,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -909,6 +910,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -922,7 +924,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 5d97026..b9fe960 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:35:03 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -45,11 +54,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,18 +93,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -103,6 +114,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -294,7 +311,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -402,10 +420,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -416,9 +444,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -495,7 +521,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -559,7 +587,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -577,6 +604,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -586,8 +614,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -595,6 +626,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -623,4 +655,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 7ad080e..2ca79ed 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:36:36 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -90,19 +100,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -307,7 +324,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x009e0000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
 
 #
@@ -509,6 +527,7 @@
 # CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=y
@@ -595,6 +614,7 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -603,7 +623,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -616,6 +635,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -628,9 +648,9 @@
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -820,6 +840,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -832,7 +853,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -931,6 +956,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -956,10 +982,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -1087,10 +1110,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -1105,9 +1138,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1149,6 +1180,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1167,7 +1199,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1217,6 +1248,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1416,8 +1448,10 @@
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1489,7 +1523,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1591,6 +1624,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1621,23 +1655,29 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1650,14 +1690,13 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1672,7 +1711,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1715,11 +1753,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1790,5 +1830,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 608fe56..b012ca7 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:14:36 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:42:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,19 +101,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -113,6 +124,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +140,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,7 +156,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -176,6 +191,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -233,6 +249,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +331,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
 
 #
@@ -334,7 +352,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -382,6 +406,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -411,19 +436,17 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT_PID=y
@@ -444,6 +467,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -453,9 +477,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -590,7 +614,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -598,6 +621,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -631,10 +655,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
@@ -648,12 +669,13 @@
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 # CONFIG_IWM is not set
 
 #
@@ -750,10 +772,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -764,9 +796,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -813,6 +843,7 @@
 # CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -827,9 +858,9 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
-# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
 # CONFIG_USB_HWA_HCD is not set
 
 #
@@ -893,6 +924,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -917,6 +949,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -949,8 +983,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1014,7 +1050,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1091,6 +1126,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1103,8 +1139,11 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1112,6 +1151,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1125,7 +1165,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1167,11 +1206,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1235,5 +1276,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
index ee1987e..9f8aee5 100644
--- a/arch/sh/configs/urquell_defconfig
+++ b/arch/sh/configs/urquell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:15:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:46:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,11 +14,13 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_SYS_SUPPORTS_TMU=y
@@ -29,7 +31,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -54,14 +64,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,20 +119,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -134,6 +142,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -195,6 +208,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -244,7 +258,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -252,6 +265,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -322,6 +336,7 @@
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_SECCOMP=y
+# CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -334,7 +349,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -343,6 +359,8 @@
 # CONFIG_SH_PCIDMA_NONCOHERENT is not set
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 CONFIG_PCIEASPM=y
 CONFIG_PCIEASPM_DEBUG=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
@@ -367,6 +385,7 @@
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
@@ -420,6 +439,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -442,7 +462,6 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -450,6 +469,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -458,7 +478,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +490,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -480,9 +500,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -620,6 +640,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
@@ -641,6 +662,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -668,6 +690,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -686,7 +709,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -782,6 +809,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -789,10 +817,7 @@
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -842,14 +867,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -902,6 +932,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -931,6 +962,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -958,15 +990,17 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -987,14 +1021,24 @@
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1045,6 +1089,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1056,9 +1101,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-CONFIG_THERMAL_HWMON=y
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1079,8 +1122,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1099,6 +1144,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1183,7 +1229,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1206,6 +1251,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1255,6 +1301,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1373,6 +1420,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1422,6 +1470,7 @@
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=y
@@ -1431,9 +1480,11 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_BTRFS_FS=y
 # CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1499,12 +1550,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1576,6 +1627,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1610,18 +1662,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1633,11 +1690,11 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1652,7 +1709,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1694,11 +1750,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1764,5 +1822,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 3509775..5491b09 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -17,6 +17,7 @@
 #include <linux/sh_timer.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <asm/dma-sh.h>
 #include <cpu/sh7722.h>
 
 static struct resource rtc_resources[] = {
@@ -373,6 +374,18 @@
 	},
 };
 
+static struct sh_dmae_pdata dma_platform_data = {
+	.mode = 0,
+};
+
+static struct platform_device dma_device = {
+	.name		= "sh-dma-engine",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7722_devices[] __initdata = {
 	&cmt_device,
 	&tmu0_device,
@@ -385,6 +398,7 @@
 	&vpu_device,
 	&veu_device,
 	&jpu_device,
+	&dma_device,
 };
 
 static int __init sh7722_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 2c901f4..12ff56f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
+#include <asm/dma-sh.h>
 
 static struct sh_timer_config tmu0_platform_data = {
 	.name = "TMU0",
@@ -240,6 +241,18 @@
 	},
 };
 
+static struct sh_dmae_pdata dma_platform_data = {
+	.mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1),
+};
+
+static struct platform_device dma_device = {
+	.name           = "sh-dma-engine",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7780_devices[] __initdata = {
 	&tmu0_device,
 	&tmu1_device,
@@ -249,6 +262,7 @@
 	&tmu5_device,
 	&rtc_device,
 	&sci_device,
+	&dma_device,
 };
 
 static int __init sh7780_devices_setup(void)
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index bc4d8d7..03b3616 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -24,7 +24,6 @@
 #include <asm/unwinder.h>
 #include <asm/sections.h>
 #include <asm/unaligned.h>
-#include <asm/dwarf.h>
 #include <asm/stacktrace.h>
 
 /* Reserve enough memory for two stack frames */
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 6aba9af..69bb165 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -452,6 +452,12 @@
 	u_int rm;
 	int ret, index;
 
+	/*
+	 * XXX: We can't handle mixed 16/32-bit instructions yet
+	 */
+	if (instruction_size(instruction) != 2)
+		return -EINVAL;
+
 	index = (instruction>>8)&15;	/* 0x0F00 */
 	rm = regs->regs[index];
 
@@ -619,9 +625,9 @@
 
 		se_user += 1;
 
-#ifndef CONFIG_CPU_SH2A
 		set_fs(USER_DS);
-		if (copy_from_user(&instruction, (u16 *)(regs->pc & ~1), 2)) {
+		if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
+				   sizeof(instruction))) {
 			set_fs(oldfs);
 			goto uspace_segv;
 		}
@@ -633,7 +639,6 @@
 			       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
 			       current->comm, current->pid, (void *)regs->pc,
 			       instruction);
-#endif
 
 		if (se_usermode & 2)
 			goto fixup;
@@ -673,12 +678,6 @@
 	} else {
 		se_sys += 1;
 
-		if (se_kernmode_warn)
-			printk(KERN_NOTICE "Unaligned kernel access "
-			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
-			       current->comm, current->pid, (void *)regs->pc,
-			       instruction);
-
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
 
@@ -692,6 +691,12 @@
 			die("insn faulting in do_address_error", regs, 0);
 		}
 
+		if (se_kernmode_warn)
+			printk(KERN_NOTICE "Unaligned kernel access "
+			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			       current->comm, current->pid, (void *)regs->pc,
+			       instruction);
+
 		handle_unaligned_access(instruction, regs,
 					&user_mem_access, 0);
 		set_fs(oldfs);
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 97fca46..ac45aab 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -102,6 +102,9 @@
 config NEED_PER_CPU_EMBED_FIRST_CHUNK
 	def_bool y if SPARC64
 
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+	def_bool y if SPARC64
+
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
index 6cdbf7e..9d83d3b 100644
--- a/arch/sparc/include/asm/vio.h
+++ b/arch/sparc/include/asm/vio.h
@@ -258,8 +258,6 @@
 static inline u32 vio_dring_avail(struct vio_dring_state *dr,
 				  unsigned int ring_size)
 {
-	MAYBE_BUILD_BUG_ON(!is_power_of_2(ring_size));
-
 	return (dr->pending -
 		((dr->prod - dr->cons) & (ring_size - 1)));
 }
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index ff68373..aa36223 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1420,7 +1420,7 @@
 	free_bootmem(__pa(ptr), size);
 }
 
-static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
 {
 	if (cpu_to_node(from) == cpu_to_node(to))
 		return LOCAL_DISTANCE;
@@ -1428,18 +1428,53 @@
 		return REMOTE_DISTANCE;
 }
 
+static void __init pcpu_populate_pte(unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+	pud_t *pud;
+	pmd_t *pmd;
+
+	pud = pud_offset(pgd, addr);
+	if (pud_none(*pud)) {
+		pmd_t *new;
+
+		new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+		pud_populate(&init_mm, pud, new);
+	}
+
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd)) {
+		pte_t *new;
+
+		new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+		pmd_populate_kernel(&init_mm, pmd, new);
+	}
+}
+
 void __init setup_per_cpu_areas(void)
 {
 	unsigned long delta;
 	unsigned int cpu;
-	int rc;
+	int rc = -EINVAL;
 
-	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
-				    PERCPU_DYNAMIC_RESERVE, 4 << 20,
-				    pcpu_cpu_distance, pcpu_alloc_bootmem,
-				    pcpu_free_bootmem);
-	if (rc)
-		panic("failed to initialize first chunk (%d)", rc);
+	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+		rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+					    PERCPU_DYNAMIC_RESERVE, 4 << 20,
+					    pcpu_cpu_distance,
+					    pcpu_alloc_bootmem,
+					    pcpu_free_bootmem);
+		if (rc)
+			pr_warning("PERCPU: %s allocator failed (%d), "
+				   "falling back to page size\n",
+				   pcpu_fc_names[pcpu_chosen_fc], rc);
+	}
+	if (rc < 0)
+		rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE,
+					   pcpu_alloc_bootmem,
+					   pcpu_free_bootmem,
+					   pcpu_populate_pte);
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu)
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index 37ecc55..ac55b9e 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -16,11 +16,7 @@
 
   . = ALIGN(4096);
   .note : { *(.note.*) }
-  __ex_table : {
-	__start___ex_table = .;
-	*(__ex_table)
-	__stop___ex_table = .;
-  }
+  EXCEPTION_TABLE(0)
 
   BUG_TABLE
 
@@ -43,28 +39,17 @@
   }
 	
   .init.setup : {
-	__setup_start = .;
-	*(.init.setup)
-	__setup_end = .;
+	INIT_SETUP(0)
   }
 
-  . = ALIGN(32);
-  .data.percpu : {
-	__per_cpu_start = . ;
-	*(.data.percpu)
-	__per_cpu_end = . ;
-  }
+  PERCPU(32)
 	
   .initcall.init : {
-	__initcall_start = .;
-	INITCALLS
-	__initcall_end = .;
+	INIT_CALLS
   }
 
   .con_initcall.init : {
-	__con_initcall_start = .;
-	*(.con_initcall.init)
-	__con_initcall_end = .;
+	CON_INITCALL
   }
 
   .uml.initcall.init : {
@@ -118,8 +103,6 @@
 
    . = ALIGN(4096);
   .init.ramfs : {
-	__initramfs_start = .;
-	*(.init.ramfs)
-	__initramfs_end = .;
+	INIT_RAM_FS
   }
 
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 715a188..7fcad58 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -16,11 +16,7 @@
   _text = .;
   _stext = .;
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
 
   . = ALIGN(PAGE_SIZE);
 
@@ -96,8 +92,7 @@
   .init_array     : { *(.init_array) }
   .fini_array     : { *(.fini_array) }
   .data           : {
-    . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
     *(.data.init_irqstack)
     DATA_DATA
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 2ebd397..e7a6cca 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -22,11 +22,7 @@
   _text = .;
   _stext = .;
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
   . = ALIGN(PAGE_SIZE);
 
   .text      :
@@ -52,8 +48,7 @@
   init.data : { INIT_DATA }
   .data    :
   {
-    . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
     *(.data.init_irqstack)
     DATA_DATA
@@ -81,19 +76,10 @@
   _edata  =  .;
   PROVIDE (edata = .);
   . = ALIGN(PAGE_SIZE);
-  .sbss      :
-  {
-   __bss_start = .;
-   PROVIDE(_bss_start = .);
-   *(.sbss)
-   *(.scommon)
-  }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
+  __bss_start = .;
+  PROVIDE(_bss_start = .);
+  SBSS(0)
+  BSS(0)
   _end = .;
   PROVIDE (end = .);
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9369879..8da9374 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -432,6 +432,17 @@
 	  of Flat Logical.  You will need a new lynxer.elf file to flash your
 	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
+config X86_SUPPORTS_MEMORY_FAILURE
+	bool
+	# MCE code calls memory_failure():
+	depends on X86_MCE
+	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
+	depends on !X86_NUMAQ
+	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
+	depends on X86_64 || !SPARSEMEM
+	select ARCH_SUPPORTS_MEMORY_FAILURE
+	default y
+
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 75e4f00..f543b70 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -23,13 +23,14 @@
  */
 	.text
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-	.section ".text.head","ax",@progbits
+	__HEAD
 ENTRY(startup_32)
 	cld
 	/*
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index f62c284..077e1b6 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -24,6 +24,7 @@
 	.code32
 	.text
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/pgtable_types.h>
@@ -33,7 +34,7 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
-	.section ".text.head"
+	__HEAD
 	.code32
 ENTRY(startup_32)
 	cld
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index cc353e1..f4193bb 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -1,3 +1,5 @@
+#include <asm-generic/vmlinux.lds.h>
+
 OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
 
 #undef i386
@@ -18,9 +20,9 @@
 	 * address 0.
 	 */
 	. = 0;
-	.text.head : {
+	.head.text : {
 		_head = . ;
-		*(.text.head)
+		HEAD_TEXT
 		_ehead = . ;
 	}
 	.rodata.compressed : {
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index 82ceb78..ee1931b 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -312,19 +312,23 @@
 
 extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
 
-#define cmpxchg64(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 4))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg64((ptr),		\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	__ret;								\
-})
+#define cmpxchg64(ptr, o, n)					\
+({								\
+	__typeof__(*(ptr)) __ret;				\
+	__typeof__(*(ptr)) __old = (o);				\
+	__typeof__(*(ptr)) __new = (n);				\
+	alternative_io("call cmpxchg8b_emu",			\
+			"lock; cmpxchg8b (%%esi)" ,		\
+		       X86_FEATURE_CX8,				\
+		       "=A" (__ret),				\
+		       "S" ((ptr)), "0" (__old),		\
+		       "b" ((unsigned int)__new),		\
+		       "c" ((unsigned int)(__new>>32))		\
+		       : "memory");				\
+	__ret; })
+
+
+
 #define cmpxchg64_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 7b467bf..d1f4a76 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -277,6 +277,7 @@
 typedef struct page *pgtable_t;
 
 extern pteval_t __supported_pte_mask;
+extern void set_nx(void);
 extern int nx_enabled;
 
 #define pgprot_writecombine	pgprot_writecombine
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 6f0695d..25a9284 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -165,21 +165,11 @@
 	return 0;
 }
 
-static inline int cpu_to_node(int cpu)
-{
-	return 0;
-}
-
 static inline int early_cpu_to_node(int cpu)
 {
 	return 0;
 }
 
-static inline const struct cpumask *cpumask_of_node(int node)
-{
-	return cpu_online_mask;
-}
-
 static inline void setup_node_to_cpumask_map(void) { }
 
 #endif
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 8c44c23..59cdfa4 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -48,7 +48,7 @@
 	 * P4, Core and beyond CPUs
 	 */
 	if (c->x86_vendor == X86_VENDOR_INTEL &&
-	    (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+	    (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 14)))
 			flags->bm_control = 0;
 }
 EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 7029f0e..472763d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -98,8 +98,9 @@
 };
 
 /* Inject mce on current CPU */
-static int raise_local(struct mce *m)
+static int raise_local(void)
 {
+	struct mce *m = &__get_cpu_var(injectm);
 	int context = MCJ_CTX(m->inject_flags);
 	int ret = 0;
 	int cpu = m->extcpu;
@@ -167,12 +168,12 @@
 			}
 			cpu_relax();
 		}
-		raise_local(m);
+		raise_local();
 		put_cpu();
 		put_online_cpus();
 	} else
 #endif
-		raise_local(m);
+		raise_local();
 }
 
 /* Error injection interface */
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 2f5aab2..183c345 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -204,10 +204,7 @@
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
-	       "Run through mcelog --ascii to decode and contact your hardware vendor\n"
-#endif
-	       );
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -305,13 +302,25 @@
 static u64 mce_rdmsrl(u32 msr)
 {
 	u64 v;
+
 	if (__get_cpu_var(injectm).finished) {
 		int offset = msr_to_offset(msr);
+
 		if (offset < 0)
 			return 0;
 		return *(u64 *)((char *)&__get_cpu_var(injectm) + offset);
 	}
-	rdmsrl(msr, v);
+
+	if (rdmsrl_safe(msr, &v)) {
+		WARN_ONCE(1, "mce: Unable to read msr %d!\n", msr);
+		/*
+		 * Return zero in case the access faulted. This should
+		 * not happen normally but can happen if the CPU does
+		 * something weird, or if the code is buggy.
+		 */
+		v = 0;
+	}
+
 	return v;
 }
 
@@ -319,6 +328,7 @@
 {
 	if (__get_cpu_var(injectm).finished) {
 		int offset = msr_to_offset(msr);
+
 		if (offset >= 0)
 			*(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v;
 		return;
@@ -415,7 +425,7 @@
 		m->ip = mce_rdmsrl(rip_msr);
 }
 
-#ifdef CONFIG_X86_LOCAL_APIC 
+#ifdef CONFIG_X86_LOCAL_APIC
 /*
  * Called after interrupts have been reenabled again
  * when a MCE happened during an interrupts off region
@@ -1172,6 +1182,7 @@
 		return -ENOMEM;
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		b->ctl = -1ULL;
 		b->init = 1;
 	}
@@ -1203,6 +1214,7 @@
 	banks = b;
 	if (!mce_banks) {
 		int err = mce_banks_init();
+
 		if (err)
 			return err;
 	}
@@ -1237,6 +1249,7 @@
 
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (!b->init)
 			continue;
 		wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
@@ -1626,6 +1639,7 @@
 
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
@@ -1911,6 +1925,7 @@
 		cmci_clear();
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
@@ -1928,6 +1943,7 @@
 		cmci_reenable();
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 63a56d1..b3a1dba 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -34,20 +34,31 @@
 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL		(300 * HZ)
 
-static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
-static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
-static DEFINE_PER_CPU(bool, thermal_throttle_active);
+/*
+ * Current thermal throttling state:
+ */
+struct thermal_state {
+	bool			is_throttled;
 
-static atomic_t therm_throt_en		= ATOMIC_INIT(0);
+	u64			next_check;
+	unsigned long		throttle_count;
+	unsigned long		last_throttle_count;
+};
+
+static DEFINE_PER_CPU(struct thermal_state, thermal_state);
+
+static atomic_t therm_throt_en	= ATOMIC_INIT(0);
 
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
 	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
 
 #define define_therm_throt_sysdev_show_func(name)			\
-static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,	\
-					struct sysdev_attribute *attr,	\
-					      char *buf)		\
+									\
+static ssize_t therm_throt_sysdev_show_##name(				\
+			struct sys_device *dev,				\
+			struct sysdev_attribute *attr,			\
+			char *buf)					\
 {									\
 	unsigned int cpu = dev->id;					\
 	ssize_t ret;							\
@@ -55,7 +66,7 @@
 	preempt_disable();	/* CPU hotplug */			\
 	if (cpu_online(cpu))						\
 		ret = sprintf(buf, "%lu\n",				\
-			      per_cpu(thermal_throttle_##name, cpu));	\
+			      per_cpu(thermal_state, cpu).name);	\
 	else								\
 		ret = 0;						\
 	preempt_enable();						\
@@ -63,11 +74,11 @@
 	return ret;							\
 }
 
-define_therm_throt_sysdev_show_func(count);
-define_therm_throt_sysdev_one_ro(count);
+define_therm_throt_sysdev_show_func(throttle_count);
+define_therm_throt_sysdev_one_ro(throttle_count);
 
 static struct attribute *thermal_throttle_attrs[] = {
-	&attr_count.attr,
+	&attr_throttle_count.attr,
 	NULL
 };
 
@@ -93,33 +104,39 @@
  *          1 : Event should be logged further, and a message has been
  *              printed to the syslog.
  */
-static int therm_throt_process(int curr)
+static int therm_throt_process(bool is_throttled)
 {
-	unsigned int cpu = smp_processor_id();
-	__u64 tmp_jiffs = get_jiffies_64();
-	bool was_throttled = __get_cpu_var(thermal_throttle_active);
-	bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
+	struct thermal_state *state;
+	unsigned int this_cpu;
+	bool was_throttled;
+	u64 now;
+
+	this_cpu = smp_processor_id();
+	now = get_jiffies_64();
+	state = &per_cpu(thermal_state, this_cpu);
+
+	was_throttled = state->is_throttled;
+	state->is_throttled = is_throttled;
 
 	if (is_throttled)
-		__get_cpu_var(thermal_throttle_count)++;
+		state->throttle_count++;
 
-	if (!(was_throttled ^ is_throttled) &&
-	    time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+	if (time_before64(now, state->next_check) &&
+			state->throttle_count != state->last_throttle_count)
 		return 0;
 
-	__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
+	state->next_check = now + CHECK_INTERVAL;
+	state->last_throttle_count = state->throttle_count;
 
 	/* if we just entered the thermal event */
 	if (is_throttled) {
-		printk(KERN_CRIT "CPU%d: Temperature above threshold, "
-		       "cpu clock throttled (total events = %lu)\n",
-		       cpu, __get_cpu_var(thermal_throttle_count));
+		printk(KERN_CRIT "CPU%d: Temperature above threshold, cpu clock throttled (total events = %lu)\n", this_cpu, state->throttle_count);
 
 		add_taint(TAINT_MACHINE_CHECK);
 		return 1;
 	}
 	if (was_throttled) {
-		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", this_cpu);
 		return 1;
 	}
 
@@ -213,7 +230,7 @@
 	__u64 msr_val;
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
+	if (therm_throt_process((msr_val & THERM_STATUS_PROCHOT) != 0))
 		mce_log_therm_throt_event(msr_val);
 }
 
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index a3c7adb..b5801c3 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1790,6 +1790,9 @@
 void set_perf_event_pending(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
+	if (!x86_pmu.apic || !x86_pmu_initialized())
+		return;
+
 	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
 #endif
 }
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..41fd965 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -178,6 +178,11 @@
 
 static inline void early_console_register(struct console *con, int keep_early)
 {
+	if (early_console->index != -1) {
+		printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
+		       con->name);
+		return;
+	}
 	early_console = con;
 	if (keep_early)
 		early_console->flags &= ~CON_BOOT;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 218aad7..050c278 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -79,7 +79,7 @@
  * any particular GDT layout, because we load our own as soon as we
  * can.
  */
-.section .text.head,"ax",@progbits
+__HEAD
 ENTRY(startup_32)
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 		us to not reload segments */
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index d0bc0a1..780cd92 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -40,7 +40,7 @@
 L3_START_KERNEL = pud_index(__START_KERNEL_map)
 
 	.text
-	.section .text.head
+	__HEAD
 	.code64
 	.globl startup_64
 startup_64:
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 43cec6b..1736c5a 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -10,6 +10,14 @@
 EXPORT_SYMBOL(mcount);
 #endif
 
+/*
+ * Note, this is a prototype to get at the symbol for
+ * the export, but dont use it from C code, it is used
+ * by assembly code and is not using C calling convention!
+ */
+extern void cmpxchg8b_emu(void);
+EXPORT_SYMBOL(cmpxchg8b_emu);
+
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial_copy_generic);
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a665c71..7e37dce 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -72,11 +72,9 @@
 
 /*
  * The IDT has to be page-aligned to simplify the Pentium
- * F0 0F bug workaround.. We have a special link segment
- * for this.
+ * F0 0F bug workaround.
  */
-gate_desc idt_table[NR_VECTORS]
-	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
+gate_desc idt_table[NR_VECTORS] __page_aligned_data = { { { { 0, 0 } } }, };
 #endif
 
 DECLARE_BITMAP(used_vectors, NR_VECTORS);
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 027b5b4..f379309 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -114,7 +114,7 @@
 		return;
 
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
-		pr_info("Skipping synchronization checks as TSC is reliable.\n");
+		printk_once(KERN_INFO "Skipping synchronization checks as TSC is reliable.\n");
 		return;
 	}
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index a46accc..92929fb 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -65,17 +65,11 @@
 #endif
 
 	/* Text and read-only data */
-
-	/* bootstrapping code */
-	.text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
-		_text = .;
-		*(.text.head)
-	} :text = 0x9090
-
-	/* The rest of the text */
 	.text :  AT(ADDR(.text) - LOAD_OFFSET) {
+		_text = .;
+		/* bootstrapping code */
+		HEAD_TEXT
 #ifdef CONFIG_X86_32
-		/* not really needed, already page aligned */
 		. = ALIGN(PAGE_SIZE);
 		*(.text.page_aligned)
 #endif
@@ -94,13 +88,7 @@
 
 	NOTES :text :note
 
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	} :text = 0x9090
+	EXCEPTION_TABLE(16) :text = 0x9090
 
 	RO_DATA(PAGE_SIZE)
 
@@ -118,7 +106,6 @@
 #endif
 
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
-		*(.data.idt)
 
 		CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
 
@@ -135,24 +122,21 @@
 #ifdef CONFIG_X86_64
 
 #define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
-                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
-                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
 
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD_OFFSET (VSYSCALL_ADDR - __vsyscall_0 + LOAD_OFFSET)
 #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
 
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0)
 #define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
 
+	. = ALIGN(4096);
+	__vsyscall_0 = .;
+
 	. = VSYSCALL_ADDR;
-	.vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+	.vsyscall_0 : AT(VLOAD(.vsyscall_0)) {
 		*(.vsyscall_0)
 	} :user
 
-	__vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
 	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
 	.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
 		*(.vsyscall_fn)
@@ -192,11 +176,9 @@
 		*(.vsyscall_3)
 	}
 
-	. = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+	. = __vsyscall_0 + PAGE_SIZE;
 
 #undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
 #undef VLOAD_OFFSET
 #undef VLOAD
 #undef VVIRT_OFFSET
@@ -219,36 +201,12 @@
 	PERCPU_VADDR(0, :percpu)
 #endif
 
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 #ifdef CONFIG_X86_64
 	:init
 #endif
 
-	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
-		INIT_DATA
-	}
-
-	. = ALIGN(16);
-	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
+	INIT_DATA_SECTION(16)
 
 	.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
 		__x86_cpu_dev_start = .;
@@ -256,8 +214,6 @@
 		__x86_cpu_dev_end = .;
 	}
 
-	SECURITY_INIT
-
 	. = ALIGN(8);
 	.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
 		__parainstructions = .;
@@ -288,15 +244,6 @@
 		EXIT_DATA
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
 #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
 	PERCPU(PAGE_SIZE)
 #endif
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 9e60920..3e549b8 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -15,7 +15,7 @@
         obj-y += atomic64_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
-        lib-y += semaphore_32.o string_32.o
+        lib-y += semaphore_32.o string_32.o cmpxchg8b_emu.o
 
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S
new file mode 100644
index 0000000..828cb71
--- /dev/null
+++ b/arch/x86/lib/cmpxchg8b_emu.S
@@ -0,0 +1,57 @@
+/*
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; version 2
+ *	of the License.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/frame.h>
+#include <asm/dwarf2.h>
+
+
+.text
+
+/*
+ * Inputs:
+ * %esi : memory location to compare
+ * %eax : low 32 bits of old value
+ * %edx : high 32 bits of old value
+ * %ebx : low 32 bits of new value
+ * %ecx : high 32 bits of new value
+ */
+ENTRY(cmpxchg8b_emu)
+CFI_STARTPROC
+
+#
+# Emulate 'cmpxchg8b (%esi)' on UP except we don't
+# set the whole ZF thing (caller will just compare
+# eax:edx with the expected value)
+#
+cmpxchg8b_emu:
+	pushfl
+	cli
+
+	cmpl  (%esi), %eax
+	jne not_same
+	cmpl 4(%esi), %edx
+	jne half_same
+
+	movl %ebx,  (%esi)
+	movl %ecx, 4(%esi)
+
+	popfl
+	ret
+
+ not_same:
+	movl  (%esi), %eax
+ half_same:
+	movl 4(%esi), %edx
+
+	popfl
+	ret
+
+CFI_ENDPROC
+ENDPROC(cmpxchg8b_emu)
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9b5a9f5..06630d2 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,9 +1,10 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o physaddr.o gup.o
+	    pat.o pgtable.o physaddr.o gup.o setup_nx.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_physaddr.o		:= $(nostackp)
+CFLAGS_setup_nx.o		:= $(nostackp)
 
 obj-$(CONFIG_SMP)		+= tlb.o
 
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 0607119..73ffd55 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -28,69 +28,6 @@
 #endif
 ;
 
-int nx_enabled;
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-static int disable_nx __cpuinitdata;
-
-/*
- * noexec = on|off
- *
- * Control non-executable mappings for processes.
- *
- * on      Enable
- * off     Disable
- */
-static int __init noexec_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
-		disable_nx = 0;
-	} else if (!strncmp(str, "off", 3)) {
-		disable_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-	}
-	return 0;
-}
-early_param("noexec", noexec_setup);
-#endif
-
-#ifdef CONFIG_X86_PAE
-static void __init set_nx(void)
-{
-	unsigned int v[4], l, h;
-
-	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
-		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
-
-		if ((v[3] & (1 << 20)) && !disable_nx) {
-			rdmsr(MSR_EFER, l, h);
-			l |= EFER_NX;
-			wrmsr(MSR_EFER, l, h);
-			nx_enabled = 1;
-			__supported_pte_mask |= _PAGE_NX;
-		}
-	}
-}
-#else
-static inline void set_nx(void)
-{
-}
-#endif
-
-#ifdef CONFIG_X86_64
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || disable_nx)
-		__supported_pte_mask &= ~_PAGE_NX;
-}
-#endif
-
 static void __init find_early_table_space(unsigned long end, int use_pse,
 					  int use_gbpages)
 {
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 7257cf3..e78cd0e 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -81,6 +81,7 @@
 void pat_init(void)
 {
 	u64 pat;
+	bool boot_cpu = !boot_pat_state;
 
 	if (!pat_enabled)
 		return;
@@ -122,8 +123,10 @@
 		rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
 
 	wrmsrl(MSR_IA32_CR_PAT, pat);
-	printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
-	       smp_processor_id(), boot_pat_state, pat);
+
+	if (boot_cpu)
+		printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
+		       smp_processor_id(), boot_pat_state, pat);
 }
 
 #undef PAT
diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c
new file mode 100644
index 0000000..513d8ed
--- /dev/null
+++ b/arch/x86/mm/setup_nx.c
@@ -0,0 +1,69 @@
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+
+int nx_enabled;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+static int disable_nx __cpuinitdata;
+
+/*
+ * noexec = on|off
+ *
+ * Control non-executable mappings for processes.
+ *
+ * on      Enable
+ * off     Disable
+ */
+static int __init noexec_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		disable_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		disable_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
+	}
+	return 0;
+}
+early_param("noexec", noexec_setup);
+#endif
+
+#ifdef CONFIG_X86_PAE
+void __init set_nx(void)
+{
+	unsigned int v[4], l, h;
+
+	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
+		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+
+		if ((v[3] & (1 << 20)) && !disable_nx) {
+			rdmsr(MSR_EFER, l, h);
+			l |= EFER_NX;
+			wrmsr(MSR_EFER, l, h);
+			nx_enabled = 1;
+			__supported_pte_mask |= _PAGE_NX;
+		}
+	}
+}
+#else
+void set_nx(void)
+{
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || disable_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+#endif
+
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 52e62e5..b22d13b 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -266,7 +266,7 @@
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
-static struct vm_operations_struct pci_mmap_ops = {
+static const struct vm_operations_struct pci_mmap_ops = {
 	.access = generic_access_phys,
 };
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 544eb74..3439616 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1082,6 +1082,11 @@
 
 	__supported_pte_mask |= _PAGE_IOMAP;
 
+#ifdef CONFIG_X86_64
+	/* Work out if we support NX */
+	check_efer();
+#endif
+
 	xen_setup_features();
 
 	/* Get mfn list */
@@ -1123,11 +1128,6 @@
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-#ifdef CONFIG_X86_64
-	/* Work out if we support NX */
-	check_efer();
-#endif
-
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 921b6ff..9b52615 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -15,6 +15,8 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
 
 #include <variant/core.h>
 #include <platform/hardware.h>
@@ -107,41 +109,18 @@
 
   .fixup   : { *(.fixup) }
 
-  . = ALIGN(16);
-
-  __ex_table : {
-    __start___ex_table = .;
-    *(__ex_table)
-    __stop___ex_table = .;
-  }
-
+  EXCEPTION_TABLE(16)
   /* Data section */
 
-  . = ALIGN(XCHAL_ICACHE_LINESIZE);
   _fdata = .;
-  .data :
-  {
-    DATA_DATA
-    CONSTRUCTORS
-    . = ALIGN(XCHAL_ICACHE_LINESIZE);
-    *(.data.cacheline_aligned)
-  }
-
+  RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
   _edata = .;
 
-  /* The initial task */
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
-
   /* Initialization code and data: */
 
-  . = ALIGN(1 << 12);
+  . = ALIGN(PAGE_SIZE);
   __init_begin = .;
-  .init.text : {
-  	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
 
   .init.data :
   {
@@ -168,36 +147,15 @@
 		   .DebugInterruptVector.text);
   
     __boot_reloc_table_end = ABSOLUTE(.) ;
+
+    INIT_SETUP(XCHAL_ICACHE_LINESIZE)
+    INIT_CALLS
+    CON_INITCALL
+    SECURITY_INITCALL
+    INIT_RAM_FS
   }
 
-  . = ALIGN(XCHAL_ICACHE_LINESIZE);
-
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-
-  SECURITY_INIT
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start =.;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  PERCPU(4096)
-
+  PERCPU(PAGE_SIZE)
 
   /* We need this dummy segment here */
 
@@ -252,16 +210,11 @@
 		  .DoubleExceptionVector.literal)
 
   . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
-  . = ALIGN(1 << 12);
+  . = ALIGN(PAGE_SIZE);
 
   __init_end = .;
 
-  . = ALIGN(8192);
-
-  /* BSS section */
-  _bss_start = .;
-  .bss : { *(.bss.page_aligned) *(.bss) }
-  _bss_end = .;
+  BSS_SECTION(0, 8192, 0)
 
   _end = .;
 
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 135fbfe..7411915 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -94,36 +94,33 @@
 
 EXPORT_SYMBOL(acpi_bus_get_device);
 
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+				       unsigned long long *sta)
+{
+	acpi_status status;
+
+	status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
+	if (ACPI_SUCCESS(status))
+		return AE_OK;
+
+	if (status == AE_NOT_FOUND) {
+		*sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+		       ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
+		return AE_OK;
+	}
+	return status;
+}
+
 int acpi_bus_get_status(struct acpi_device *device)
 {
-	acpi_status status = AE_OK;
-	unsigned long long sta = 0;
+	acpi_status status;
+	unsigned long long sta;
 
+	status = acpi_bus_get_status_handle(device->handle, &sta);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
 
-	if (!device)
-		return -EINVAL;
-
-	/*
-	 * Evaluate _STA if present.
-	 */
-	if (device->flags.dynamic_status) {
-		status =
-		    acpi_evaluate_integer(device->handle, "_STA", NULL, &sta);
-		if (ACPI_FAILURE(status))
-			return -ENODEV;
-		STRUCT_TO_INT(device->status) = (int)sta;
-	}
-
-	/*
-	 * According to ACPI spec some device can be present and functional
-	 * even if the parent is not present but functional.
-	 * In such conditions the child device should not inherit the status
-	 * from the parent.
-	 */
-	else
-		STRUCT_TO_INT(device->status) =
-		    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
-		    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
+	STRUCT_TO_INT(device->status) = (int) sta;
 
 	if (device->status.functional && !device->status.present) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
@@ -135,10 +132,8 @@
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
 			  device->pnp.bus_id,
 			  (u32) STRUCT_TO_INT(device->status)));
-
 	return 0;
 }
-
 EXPORT_SYMBOL(acpi_bus_get_status);
 
 void acpi_bus_private_data_handler(acpi_handle handle,
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 5633b86..7c1c59e 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1161,7 +1161,13 @@
 			       res_list_elem->name,
 			       (long long) res_list_elem->start,
 			       (long long) res_list_elem->end);
-			printk(KERN_INFO "ACPI: Device needs an ACPI driver\n");
+			if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX)
+				printk(KERN_NOTICE "ACPI: This conflict may"
+				       " cause random problems and system"
+				       " instability\n");
+			printk(KERN_INFO "ACPI: If an ACPI driver is available"
+			       " for this device, you should use it instead of"
+			       " the native driver\n");
 		}
 		if (acpi_enforce_resources == ENFORCE_RESOURCES_STRICT)
 			return -EBUSY;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index cc61a62..bbd066e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1166,7 +1166,6 @@
 #ifdef CONFIG_ACPI_PROCFS
 	struct proc_dir_entry *entry = NULL;
 #endif
-	unsigned int i;
 
 	if (boot_option_idle_override)
 		return 0;
@@ -1214,13 +1213,6 @@
 		acpi_processor_setup_cpuidle(pr);
 		if (cpuidle_register_device(&pr->power.dev))
 			return -EIO;
-
-		printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
-		for (i = 1; i <= pr->power.count; i++)
-			if (pr->power.states[i].valid)
-				printk(" C%d[C%d]", i,
-				       pr->power.states[i].type);
-		printk(")\n");
 	}
 #ifdef CONFIG_ACPI_PROCFS
 	/* 'power' [R] */
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 408ebde..468921be 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -22,6 +22,8 @@
 #define ACPI_BUS_HID			"LNXSYBUS"
 #define ACPI_BUS_DEVICE_NAME		"System Bus"
 
+#define ACPI_IS_ROOT_DEVICE(device)    (!(device)->parent)
+
 static LIST_HEAD(acpi_device_list);
 static LIST_HEAD(acpi_bus_id_list);
 DEFINE_MUTEX(acpi_device_lock);
@@ -43,40 +45,19 @@
 {
 	int len;
 	int count;
-
-	if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids)
-		return -ENODEV;
+	struct acpi_hardware_id *id;
 
 	len = snprintf(modalias, size, "acpi:");
 	size -= len;
 
-	if (acpi_dev->flags.hardware_id) {
-		count = snprintf(&modalias[len], size, "%s:",
-				 acpi_dev->pnp.hardware_id);
+	list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
+		count = snprintf(&modalias[len], size, "%s:", id->id);
 		if (count < 0 || count >= size)
 			return -EINVAL;
 		len += count;
 		size -= count;
 	}
 
-	if (acpi_dev->flags.compatible_ids) {
-		struct acpica_device_id_list *cid_list;
-		int i;
-
-		cid_list = acpi_dev->pnp.cid_list;
-		for (i = 0; i < cid_list->count; i++) {
-			count = snprintf(&modalias[len], size, "%s:",
-					 cid_list->ids[i].string);
-			if (count < 0 || count >= size) {
-				printk(KERN_ERR PREFIX "%s cid[%i] exceeds event buffer size",
-				       acpi_dev->pnp.device_name, i);
-				break;
-			}
-			len += count;
-			size -= count;
-		}
-	}
-
 	modalias[len] = '\0';
 	return len;
 }
@@ -183,7 +164,7 @@
 acpi_device_hid_show(struct device *dev, struct device_attribute *attr, char *buf) {
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
 
-	return sprintf(buf, "%s\n", acpi_dev->pnp.hardware_id);
+	return sprintf(buf, "%s\n", acpi_device_hid(acpi_dev));
 }
 static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
 
@@ -219,17 +200,13 @@
 			goto end;
 	}
 
-	if (dev->flags.hardware_id) {
-		result = device_create_file(&dev->dev, &dev_attr_hid);
-		if (result)
-			goto end;
-	}
+	result = device_create_file(&dev->dev, &dev_attr_hid);
+	if (result)
+		goto end;
 
-	if (dev->flags.hardware_id || dev->flags.compatible_ids) {
-		result = device_create_file(&dev->dev, &dev_attr_modalias);
-		if (result)
-			goto end;
-	}
+	result = device_create_file(&dev->dev, &dev_attr_modalias);
+	if (result)
+		goto end;
 
         /*
          * If device has _EJ0, 'eject' file is created that is used to trigger
@@ -255,11 +232,8 @@
 	if (ACPI_SUCCESS(status))
 		device_remove_file(&dev->dev, &dev_attr_eject);
 
-	if (dev->flags.hardware_id || dev->flags.compatible_ids)
-		device_remove_file(&dev->dev, &dev_attr_modalias);
-
-	if (dev->flags.hardware_id)
-		device_remove_file(&dev->dev, &dev_attr_hid);
+	device_remove_file(&dev->dev, &dev_attr_modalias);
+	device_remove_file(&dev->dev, &dev_attr_hid);
 	if (dev->handle)
 		device_remove_file(&dev->dev, &dev_attr_path);
 }
@@ -271,6 +245,7 @@
 			  const struct acpi_device_id *ids)
 {
 	const struct acpi_device_id *id;
+	struct acpi_hardware_id *hwid;
 
 	/*
 	 * If the device is not present, it is unnecessary to load device
@@ -279,40 +254,30 @@
 	if (!device->status.present)
 		return -ENODEV;
 
-	if (device->flags.hardware_id) {
-		for (id = ids; id->id[0]; id++) {
-			if (!strcmp((char*)id->id, device->pnp.hardware_id))
+	for (id = ids; id->id[0]; id++)
+		list_for_each_entry(hwid, &device->pnp.ids, list)
+			if (!strcmp((char *) id->id, hwid->id))
 				return 0;
-		}
-	}
-
-	if (device->flags.compatible_ids) {
-		struct acpica_device_id_list *cid_list = device->pnp.cid_list;
-		int i;
-
-		for (id = ids; id->id[0]; id++) {
-			/* compare multiple _CID entries against driver ids */
-			for (i = 0; i < cid_list->count; i++) {
-				if (!strcmp((char*)id->id,
-					    cid_list->ids[i].string))
-					return 0;
-			}
-		}
-	}
 
 	return -ENOENT;
 }
 EXPORT_SYMBOL(acpi_match_device_ids);
 
+static void acpi_free_ids(struct acpi_device *device)
+{
+	struct acpi_hardware_id *id, *tmp;
+
+	list_for_each_entry_safe(id, tmp, &device->pnp.ids, list) {
+		kfree(id->id);
+		kfree(id);
+	}
+}
+
 static void acpi_device_release(struct device *dev)
 {
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
 
-	kfree(acpi_dev->pnp.cid_list);
-	if (acpi_dev->flags.hardware_id)
-		kfree(acpi_dev->pnp.hardware_id);
-	if (acpi_dev->flags.unique_id)
-		kfree(acpi_dev->pnp.unique_id);
+	acpi_free_ids(acpi_dev);
 	kfree(acpi_dev);
 }
 
@@ -378,15 +343,13 @@
 static int acpi_device_install_notify_handler(struct acpi_device *device)
 {
 	acpi_status status;
-	char *hid;
 
-	hid = acpi_device_hid(device);
-	if (!strcmp(hid, ACPI_BUTTON_HID_POWERF))
+	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
 		status =
 		    acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
 						     acpi_device_notify_fixed,
 						     device);
-	else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF))
+	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
 		status =
 		    acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
 						     acpi_device_notify_fixed,
@@ -404,10 +367,10 @@
 
 static void acpi_device_remove_notify_handler(struct acpi_device *device)
 {
-	if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF))
+	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
 		acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
 						acpi_device_notify_fixed);
-	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF))
+	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
 		acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
 						acpi_device_notify_fixed);
 	else
@@ -474,12 +437,12 @@
 	.uevent		= acpi_device_uevent,
 };
 
-static int acpi_device_register(struct acpi_device *device,
-				 struct acpi_device *parent)
+static int acpi_device_register(struct acpi_device *device)
 {
 	int result;
 	struct acpi_device_bus_id *acpi_device_bus_id, *new_bus_id;
 	int found = 0;
+
 	/*
 	 * Linkage
 	 * -------
@@ -501,8 +464,9 @@
 	 * If failed, create one and link it into acpi_bus_id_list
 	 */
 	list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) {
-		if(!strcmp(acpi_device_bus_id->bus_id, device->flags.hardware_id? device->pnp.hardware_id : "device")) {
-			acpi_device_bus_id->instance_no ++;
+		if (!strcmp(acpi_device_bus_id->bus_id,
+			    acpi_device_hid(device))) {
+			acpi_device_bus_id->instance_no++;
 			found = 1;
 			kfree(new_bus_id);
 			break;
@@ -510,7 +474,7 @@
 	}
 	if (!found) {
 		acpi_device_bus_id = new_bus_id;
-		strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
+		strcpy(acpi_device_bus_id->bus_id, acpi_device_hid(device));
 		acpi_device_bus_id->instance_no = 0;
 		list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
 	}
@@ -524,7 +488,7 @@
 	mutex_unlock(&acpi_device_lock);
 
 	if (device->parent)
-		device->dev.parent = &parent->dev;
+		device->dev.parent = &device->parent->dev;
 	device->dev.bus = &acpi_bus_type;
 	device->dev.release = &acpi_device_release;
 	result = device_register(&device->dev);
@@ -664,6 +628,33 @@
 /* --------------------------------------------------------------------------
                                  Device Enumeration
    -------------------------------------------------------------------------- */
+static struct acpi_device *acpi_bus_get_parent(acpi_handle handle)
+{
+	acpi_status status;
+	int ret;
+	struct acpi_device *device;
+
+	/*
+	 * Fixed hardware devices do not appear in the namespace and do not
+	 * have handles, but we fabricate acpi_devices for them, so we have
+	 * to deal with them specially.
+	 */
+	if (handle == NULL)
+		return acpi_root;
+
+	do {
+		status = acpi_get_parent(handle, &handle);
+		if (status == AE_NULL_ENTRY)
+			return NULL;
+		if (ACPI_FAILURE(status))
+			return acpi_root;
+
+		ret = acpi_bus_get_device(handle, &device);
+		if (ret == 0)
+			return device;
+	} while (1);
+}
+
 acpi_status
 acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
 {
@@ -876,11 +867,6 @@
 	if (ACPI_SUCCESS(status))
 		device->flags.dynamic_status = 1;
 
-	/* Presence of _CID indicates 'compatible_ids' */
-	status = acpi_get_handle(device->handle, "_CID", &temp);
-	if (ACPI_SUCCESS(status))
-		device->flags.compatible_ids = 1;
-
 	/* Presence of _RMV indicates 'removable' */
 	status = acpi_get_handle(device->handle, "_RMV", &temp);
 	if (ACPI_SUCCESS(status))
@@ -918,8 +904,7 @@
 	return 0;
 }
 
-static void acpi_device_get_busid(struct acpi_device *device,
-				  acpi_handle handle, int type)
+static void acpi_device_get_busid(struct acpi_device *device)
 {
 	char bus_id[5] = { '?', 0 };
 	struct acpi_buffer buffer = { sizeof(bus_id), bus_id };
@@ -931,10 +916,12 @@
 	 * The device's Bus ID is simply the object name.
 	 * TBD: Shouldn't this value be unique (within the ACPI namespace)?
 	 */
-	switch (type) {
-	case ACPI_BUS_TYPE_SYSTEM:
+	if (ACPI_IS_ROOT_DEVICE(device)) {
 		strcpy(device->pnp.bus_id, "ACPI");
-		break;
+		return;
+	}
+
+	switch (device->device_type) {
 	case ACPI_BUS_TYPE_POWER_BUTTON:
 		strcpy(device->pnp.bus_id, "PWRF");
 		break;
@@ -942,7 +929,7 @@
 		strcpy(device->pnp.bus_id, "SLPF");
 		break;
 	default:
-		acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+		acpi_get_name(device->handle, ACPI_SINGLE_NAME, &buffer);
 		/* Clean up trailing underscores (if any) */
 		for (i = 3; i > 1; i--) {
 			if (bus_id[i] == '_')
@@ -1000,204 +987,132 @@
 	return acpi_get_handle(device->handle, "_DCK", &tmp);
 }
 
-static struct acpica_device_id_list*
-acpi_add_cid(
-	struct acpi_device_info         *info,
-	struct acpica_device_id         *new_cid)
+char *acpi_device_hid(struct acpi_device *device)
 {
-	struct acpica_device_id_list    *cid;
-	char                            *next_id_string;
-	acpi_size                       cid_length;
-	acpi_size                       new_cid_length;
-	u32                             i;
+	struct acpi_hardware_id *hid;
 
+	hid = list_first_entry(&device->pnp.ids, struct acpi_hardware_id, list);
+	return hid->id;
+}
+EXPORT_SYMBOL(acpi_device_hid);
 
-	/* Allocate new CID list with room for the new CID */
+static void acpi_add_id(struct acpi_device *device, const char *dev_id)
+{
+	struct acpi_hardware_id *id;
 
-	if (!new_cid)
-		new_cid_length = info->compatible_id_list.list_size;
-	else if (info->compatible_id_list.list_size)
-		new_cid_length = info->compatible_id_list.list_size +
-			new_cid->length + sizeof(struct acpica_device_id);
-	else
-		new_cid_length = sizeof(struct acpica_device_id_list) + new_cid->length;
+	id = kmalloc(sizeof(*id), GFP_KERNEL);
+	if (!id)
+		return;
 
-	cid = ACPI_ALLOCATE_ZEROED(new_cid_length);
-	if (!cid) {
-		return NULL;
+	id->id = kmalloc(strlen(dev_id) + 1, GFP_KERNEL);
+	if (!id->id) {
+		kfree(id);
+		return;
 	}
 
-	cid->list_size = new_cid_length;
-	cid->count = info->compatible_id_list.count;
-	if (new_cid)
-		cid->count++;
-	next_id_string = (char *) cid->ids + (cid->count * sizeof(struct acpica_device_id));
-
-	/* Copy all existing CIDs */
-
-	for (i = 0; i < info->compatible_id_list.count; i++) {
-		cid_length = info->compatible_id_list.ids[i].length;
-		cid->ids[i].string = next_id_string;
-		cid->ids[i].length = cid_length;
-
-		ACPI_MEMCPY(next_id_string, info->compatible_id_list.ids[i].string,
-			cid_length);
-
-		next_id_string += cid_length;
-	}
-
-	/* Append the new CID */
-
-	if (new_cid) {
-		cid->ids[i].string = next_id_string;
-		cid->ids[i].length = new_cid->length;
-
-		ACPI_MEMCPY(next_id_string, new_cid->string, new_cid->length);
-	}
-
-	return cid;
+	strcpy(id->id, dev_id);
+	list_add_tail(&id->list, &device->pnp.ids);
 }
 
-static void acpi_device_set_id(struct acpi_device *device,
-			       struct acpi_device *parent, acpi_handle handle,
-			       int type)
+static void acpi_device_set_id(struct acpi_device *device)
 {
-	struct acpi_device_info *info = NULL;
-	char *hid = NULL;
-	char *uid = NULL;
-	struct acpica_device_id_list *cid_list = NULL;
-	char *cid_add = NULL;
 	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpica_device_id_list *cid_list;
+	int i;
 
-	switch (type) {
+	switch (device->device_type) {
 	case ACPI_BUS_TYPE_DEVICE:
-		status = acpi_get_object_info(handle, &info);
+		if (ACPI_IS_ROOT_DEVICE(device)) {
+			acpi_add_id(device, ACPI_SYSTEM_HID);
+			break;
+		} else if (ACPI_IS_ROOT_DEVICE(device->parent)) {
+			/* \_SB_, the only root-level namespace device */
+			acpi_add_id(device, ACPI_BUS_HID);
+			strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
+			strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
+			break;
+		}
+
+		status = acpi_get_object_info(device->handle, &info);
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__);
 			return;
 		}
 
 		if (info->valid & ACPI_VALID_HID)
-			hid = info->hardware_id.string;
-		if (info->valid & ACPI_VALID_UID)
-			uid = info->unique_id.string;
-		if (info->valid & ACPI_VALID_CID)
+			acpi_add_id(device, info->hardware_id.string);
+		if (info->valid & ACPI_VALID_CID) {
 			cid_list = &info->compatible_id_list;
+			for (i = 0; i < cid_list->count; i++)
+				acpi_add_id(device, cid_list->ids[i].string);
+		}
 		if (info->valid & ACPI_VALID_ADR) {
 			device->pnp.bus_address = info->address;
 			device->flags.bus_address = 1;
 		}
 
-		/* If we have a video/bay/dock device, add our selfdefined
-		   HID to the CID list. Like that the video/bay/dock drivers
-		   will get autoloaded and the device might still match
-		   against another driver.
-		*/
+		/*
+		 * Some devices don't reliably have _HIDs & _CIDs, so add
+		 * synthetic HIDs to make sure drivers can find them.
+		 */
 		if (acpi_is_video_device(device))
-			cid_add = ACPI_VIDEO_HID;
+			acpi_add_id(device, ACPI_VIDEO_HID);
 		else if (ACPI_SUCCESS(acpi_bay_match(device)))
-			cid_add = ACPI_BAY_HID;
+			acpi_add_id(device, ACPI_BAY_HID);
 		else if (ACPI_SUCCESS(acpi_dock_match(device)))
-			cid_add = ACPI_DOCK_HID;
+			acpi_add_id(device, ACPI_DOCK_HID);
 
 		break;
 	case ACPI_BUS_TYPE_POWER:
-		hid = ACPI_POWER_HID;
+		acpi_add_id(device, ACPI_POWER_HID);
 		break;
 	case ACPI_BUS_TYPE_PROCESSOR:
-		hid = ACPI_PROCESSOR_OBJECT_HID;
-		break;
-	case ACPI_BUS_TYPE_SYSTEM:
-		hid = ACPI_SYSTEM_HID;
+		acpi_add_id(device, ACPI_PROCESSOR_OBJECT_HID);
 		break;
 	case ACPI_BUS_TYPE_THERMAL:
-		hid = ACPI_THERMAL_HID;
+		acpi_add_id(device, ACPI_THERMAL_HID);
 		break;
 	case ACPI_BUS_TYPE_POWER_BUTTON:
-		hid = ACPI_BUTTON_HID_POWERF;
+		acpi_add_id(device, ACPI_BUTTON_HID_POWERF);
 		break;
 	case ACPI_BUS_TYPE_SLEEP_BUTTON:
-		hid = ACPI_BUTTON_HID_SLEEPF;
+		acpi_add_id(device, ACPI_BUTTON_HID_SLEEPF);
 		break;
 	}
 
 	/*
-	 * \_SB
-	 * ----
-	 * Fix for the system root bus device -- the only root-level device.
+	 * We build acpi_devices for some objects that don't have _HID or _CID,
+	 * e.g., PCI bridges and slots.  Drivers can't bind to these objects,
+	 * but we do use them indirectly by traversing the acpi_device tree.
+	 * This generic ID isn't useful for driver binding, but it provides
+	 * the useful property that "every acpi_device has an ID."
 	 */
-	if (((acpi_handle)parent == ACPI_ROOT_OBJECT) && (type == ACPI_BUS_TYPE_DEVICE)) {
-		hid = ACPI_BUS_HID;
-		strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
-		strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
-	}
-
-	if (hid) {
-		device->pnp.hardware_id = ACPI_ALLOCATE_ZEROED(strlen (hid) + 1);
-		if (device->pnp.hardware_id) {
-			strcpy(device->pnp.hardware_id, hid);
-			device->flags.hardware_id = 1;
-		}
-	}
-	if (!device->flags.hardware_id)
-		device->pnp.hardware_id = "";
-
-	if (uid) {
-		device->pnp.unique_id = ACPI_ALLOCATE_ZEROED(strlen (uid) + 1);
-		if (device->pnp.unique_id) {
-			strcpy(device->pnp.unique_id, uid);
-			device->flags.unique_id = 1;
-		}
-	}
-	if (!device->flags.unique_id)
-		device->pnp.unique_id = "";
-
-	if (cid_list || cid_add) {
-		struct acpica_device_id_list *list;
-
-		if (cid_add) {
-			struct acpica_device_id cid;
-			cid.length = strlen (cid_add) + 1;
-			cid.string = cid_add;
-
-			list = acpi_add_cid(info, &cid);
-		} else {
-			list = acpi_add_cid(info, NULL);
-		}
-
-		if (list) {
-			device->pnp.cid_list = list;
-			if (cid_add)
-				device->flags.compatible_ids = 1;
-		}
-	}
-
-	kfree(info);
+	if (list_empty(&device->pnp.ids))
+		acpi_add_id(device, "device");
 }
 
-static int acpi_device_set_context(struct acpi_device *device, int type)
+static int acpi_device_set_context(struct acpi_device *device)
 {
-	acpi_status status = AE_OK;
-	int result = 0;
+	acpi_status status;
+
 	/*
 	 * Context
 	 * -------
 	 * Attach this 'struct acpi_device' to the ACPI object.  This makes
-	 * resolutions from handle->device very efficient.  Note that we need
-	 * to be careful with fixed-feature devices as they all attach to the
-	 * root object.
+	 * resolutions from handle->device very efficient.  Fixed hardware
+	 * devices have no handles, so we skip them.
 	 */
-	if (type != ACPI_BUS_TYPE_POWER_BUTTON &&
-	    type != ACPI_BUS_TYPE_SLEEP_BUTTON) {
-		status = acpi_attach_data(device->handle,
-					  acpi_bus_data_handler, device);
+	if (!device->handle)
+		return 0;
 
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX "Error attaching device data\n");
-			result = -ENODEV;
-		}
-	}
-	return result;
+	status = acpi_attach_data(device->handle,
+				  acpi_bus_data_handler, device);
+	if (ACPI_SUCCESS(status))
+		return 0;
+
+	printk(KERN_ERR PREFIX "Error attaching device data\n");
+	return -ENODEV;
 }
 
 static int acpi_bus_remove(struct acpi_device *dev, int rmdevice)
@@ -1223,17 +1138,14 @@
 	return 0;
 }
 
-static int
-acpi_add_single_object(struct acpi_device **child,
-		       struct acpi_device *parent, acpi_handle handle, int type,
-			struct acpi_bus_ops *ops)
+static int acpi_add_single_object(struct acpi_device **child,
+				  acpi_handle handle, int type,
+				  unsigned long long sta,
+				  struct acpi_bus_ops *ops)
 {
-	int result = 0;
-	struct acpi_device *device = NULL;
-
-
-	if (!child)
-		return -EINVAL;
+	int result;
+	struct acpi_device *device;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	device = kzalloc(sizeof(struct acpi_device), GFP_KERNEL);
 	if (!device) {
@@ -1241,75 +1153,31 @@
 		return -ENOMEM;
 	}
 
+	INIT_LIST_HEAD(&device->pnp.ids);
+	device->device_type = type;
 	device->handle = handle;
-	device->parent = parent;
+	device->parent = acpi_bus_get_parent(handle);
 	device->bus_ops = *ops; /* workround for not call .start */
+	STRUCT_TO_INT(device->status) = sta;
 
-
-	acpi_device_get_busid(device, handle, type);
+	acpi_device_get_busid(device);
 
 	/*
 	 * Flags
 	 * -----
-	 * Get prior to calling acpi_bus_get_status() so we know whether
-	 * or not _STA is present.  Note that we only look for object
-	 * handles -- cannot evaluate objects until we know the device is
-	 * present and properly initialized.
+	 * Note that we only look for object handles -- cannot evaluate objects
+	 * until we know the device is present and properly initialized.
 	 */
 	result = acpi_bus_get_flags(device);
 	if (result)
 		goto end;
 
 	/*
-	 * Status
-	 * ------
-	 * See if the device is present.  We always assume that non-Device
-	 * and non-Processor objects (e.g. thermal zones, power resources,
-	 * etc.) are present, functioning, etc. (at least when parent object
-	 * is present).  Note that _STA has a different meaning for some
-	 * objects (e.g. power resources) so we need to be careful how we use
-	 * it.
-	 */
-	switch (type) {
-	case ACPI_BUS_TYPE_PROCESSOR:
-	case ACPI_BUS_TYPE_DEVICE:
-		result = acpi_bus_get_status(device);
-		if (ACPI_FAILURE(result)) {
-			result = -ENODEV;
-			goto end;
-		}
-		/*
-		 * When the device is neither present nor functional, the
-		 * device should not be added to Linux ACPI device tree.
-		 * When the status of the device is not present but functinal,
-		 * it should be added to Linux ACPI tree. For example : bay
-		 * device , dock device.
-		 * In such conditions it is unncessary to check whether it is
-		 * bay device or dock device.
-		 */
-		if (!device->status.present && !device->status.functional) {
-			result = -ENODEV;
-			goto end;
-		}
-		break;
-	default:
-		STRUCT_TO_INT(device->status) =
-		    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
-		    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
-		break;
-	}
-
-	/*
 	 * Initialize Device
 	 * -----------------
 	 * TBD: Synch with Core's enumeration/initialization process.
 	 */
-
-	/*
-	 * Hardware ID, Unique ID, & Bus Address
-	 * -------------------------------------
-	 */
-	acpi_device_set_id(device, parent, handle, type);
+	acpi_device_set_id(device);
 
 	/*
 	 * Power Management
@@ -1341,10 +1209,10 @@
 			goto end;
 	}
 
-	if ((result = acpi_device_set_context(device, type)))
+	if ((result = acpi_device_set_context(device)))
 		goto end;
 
-	result = acpi_device_register(device, parent);
+	result = acpi_device_register(device);
 
 	/*
 	 * Bind _ADR-Based Devices when hot add
@@ -1355,165 +1223,148 @@
 	}
 
 end:
-	if (!result)
+	if (!result) {
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			"Adding %s [%s] parent %s\n", dev_name(&device->dev),
+			 (char *) buffer.pointer,
+			 device->parent ? dev_name(&device->parent->dev) :
+					  "(null)"));
+		kfree(buffer.pointer);
 		*child = device;
-	else
+	} else
 		acpi_device_release(&device->dev);
 
 	return result;
 }
 
-static int acpi_bus_scan(struct acpi_device *start, struct acpi_bus_ops *ops)
+#define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
+			  ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING)
+
+static int acpi_bus_type_and_status(acpi_handle handle, int *type,
+				    unsigned long long *sta)
 {
-	acpi_status status = AE_OK;
-	struct acpi_device *parent = NULL;
-	struct acpi_device *child = NULL;
-	acpi_handle phandle = NULL;
-	acpi_handle chandle = NULL;
-	acpi_object_type type = 0;
-	u32 level = 1;
+	acpi_status status;
+	acpi_object_type acpi_type;
 
+	status = acpi_get_type(handle, &acpi_type);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
 
-	if (!start)
-		return -EINVAL;
-
-	parent = start;
-	phandle = start->handle;
-
-	/*
-	 * Parse through the ACPI namespace, identify all 'devices', and
-	 * create a new 'struct acpi_device' for each.
-	 */
-	while ((level > 0) && parent) {
-
-		status = acpi_get_next_object(ACPI_TYPE_ANY, phandle,
-					      chandle, &chandle);
-
-		/*
-		 * If this scope is exhausted then move our way back up.
-		 */
-		if (ACPI_FAILURE(status)) {
-			level--;
-			chandle = phandle;
-			acpi_get_parent(phandle, &phandle);
-			if (parent->parent)
-				parent = parent->parent;
-			continue;
-		}
-
-		status = acpi_get_type(chandle, &type);
+	switch (acpi_type) {
+	case ACPI_TYPE_ANY:		/* for ACPI_ROOT_OBJECT */
+	case ACPI_TYPE_DEVICE:
+		*type = ACPI_BUS_TYPE_DEVICE;
+		status = acpi_bus_get_status_handle(handle, sta);
 		if (ACPI_FAILURE(status))
-			continue;
-
-		/*
-		 * If this is a scope object then parse it (depth-first).
-		 */
-		if (type == ACPI_TYPE_LOCAL_SCOPE) {
-			level++;
-			phandle = chandle;
-			chandle = NULL;
-			continue;
-		}
-
-		/*
-		 * We're only interested in objects that we consider 'devices'.
-		 */
-		switch (type) {
-		case ACPI_TYPE_DEVICE:
-			type = ACPI_BUS_TYPE_DEVICE;
-			break;
-		case ACPI_TYPE_PROCESSOR:
-			type = ACPI_BUS_TYPE_PROCESSOR;
-			break;
-		case ACPI_TYPE_THERMAL:
-			type = ACPI_BUS_TYPE_THERMAL;
-			break;
-		case ACPI_TYPE_POWER:
-			type = ACPI_BUS_TYPE_POWER;
-			break;
-		default:
-			continue;
-		}
-
-		if (ops->acpi_op_add)
-			status = acpi_add_single_object(&child, parent,
-				chandle, type, ops);
-		else
-			status = acpi_bus_get_device(chandle, &child);
-
+			return -ENODEV;
+		break;
+	case ACPI_TYPE_PROCESSOR:
+		*type = ACPI_BUS_TYPE_PROCESSOR;
+		status = acpi_bus_get_status_handle(handle, sta);
 		if (ACPI_FAILURE(status))
-			continue;
-
-		if (ops->acpi_op_start && !(ops->acpi_op_add)) {
-			status = acpi_start_single_object(child);
-			if (ACPI_FAILURE(status))
-				continue;
-		}
-
-		/*
-		 * If the device is present, enabled, and functioning then
-		 * parse its scope (depth-first).  Note that we need to
-		 * represent absent devices to facilitate PnP notifications
-		 * -- but only the subtree head (not all of its children,
-		 * which will be enumerated when the parent is inserted).
-		 *
-		 * TBD: Need notifications and other detection mechanisms
-		 *      in place before we can fully implement this.
-		 */
-		 /*
-		 * When the device is not present but functional, it is also
-		 * necessary to scan the children of this device.
-		 */
-		if (child->status.present || (!child->status.present &&
-					child->status.functional)) {
-			status = acpi_get_next_object(ACPI_TYPE_ANY, chandle,
-						      NULL, NULL);
-			if (ACPI_SUCCESS(status)) {
-				level++;
-				phandle = chandle;
-				chandle = NULL;
-				parent = child;
-			}
-		}
+			return -ENODEV;
+		break;
+	case ACPI_TYPE_THERMAL:
+		*type = ACPI_BUS_TYPE_THERMAL;
+		*sta = ACPI_STA_DEFAULT;
+		break;
+	case ACPI_TYPE_POWER:
+		*type = ACPI_BUS_TYPE_POWER;
+		*sta = ACPI_STA_DEFAULT;
+		break;
+	default:
+		return -ENODEV;
 	}
 
 	return 0;
 }
 
+static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl,
+				      void *context, void **return_value)
+{
+	struct acpi_bus_ops *ops = context;
+	int type;
+	unsigned long long sta;
+	struct acpi_device *device;
+	acpi_status status;
+	int result;
+
+	result = acpi_bus_type_and_status(handle, &type, &sta);
+	if (result)
+		return AE_OK;
+
+	if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
+	    !(sta & ACPI_STA_DEVICE_FUNCTIONING))
+		return AE_CTRL_DEPTH;
+
+	/*
+	 * We may already have an acpi_device from a previous enumeration.  If
+	 * so, we needn't add it again, but we may still have to start it.
+	 */
+	device = NULL;
+	acpi_bus_get_device(handle, &device);
+	if (ops->acpi_op_add && !device)
+		acpi_add_single_object(&device, handle, type, sta, ops);
+
+	if (!device)
+		return AE_CTRL_DEPTH;
+
+	if (ops->acpi_op_start && !(ops->acpi_op_add)) {
+		status = acpi_start_single_object(device);
+		if (ACPI_FAILURE(status))
+			return AE_CTRL_DEPTH;
+	}
+
+	if (!*return_value)
+		*return_value = device;
+	return AE_OK;
+}
+
+static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops,
+			 struct acpi_device **child)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	void *device = NULL;
+
+	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+	printk(KERN_INFO PREFIX "Enumerating devices from [%s]\n",
+	       (char *) buffer.pointer);
+
+	status = acpi_bus_check_add(handle, 0, ops, &device);
+	if (ACPI_SUCCESS(status))
+		acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
+				    acpi_bus_check_add, ops, &device);
+
+	if (child)
+		*child = device;
+	return 0;
+}
+
 int
 acpi_bus_add(struct acpi_device **child,
 	     struct acpi_device *parent, acpi_handle handle, int type)
 {
-	int result;
 	struct acpi_bus_ops ops;
 
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_add = 1;
 
-	result = acpi_add_single_object(child, parent, handle, type, &ops);
-	if (!result)
-		result = acpi_bus_scan(*child, &ops);
-
-	return result;
+	acpi_bus_scan(handle, &ops, child);
+	return 0;
 }
 EXPORT_SYMBOL(acpi_bus_add);
 
 int acpi_bus_start(struct acpi_device *device)
 {
-	int result;
 	struct acpi_bus_ops ops;
 
+	memset(&ops, 0, sizeof(ops));
+	ops.acpi_op_start = 1;
 
-	if (!device)
-		return -EINVAL;
-
-	result = acpi_start_single_object(device);
-	if (!result) {
-		memset(&ops, 0, sizeof(ops));
-		ops.acpi_op_start = 1;
-		result = acpi_bus_scan(device, &ops);
-	}
-	return result;
+	acpi_bus_scan(device->handle, &ops, NULL);
+	return 0;
 }
 EXPORT_SYMBOL(acpi_bus_start);
 
@@ -1572,15 +1423,12 @@
 }
 EXPORT_SYMBOL_GPL(acpi_bus_trim);
 
-static int acpi_bus_scan_fixed(struct acpi_device *root)
+static int acpi_bus_scan_fixed(void)
 {
 	int result = 0;
 	struct acpi_device *device = NULL;
 	struct acpi_bus_ops ops;
 
-	if (!root)
-		return -ENODEV;
-
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_add = 1;
 	ops.acpi_op_start = 1;
@@ -1589,16 +1437,16 @@
 	 * Enumerate all fixed-feature devices.
 	 */
 	if ((acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON) == 0) {
-		result = acpi_add_single_object(&device, acpi_root,
-						NULL,
+		result = acpi_add_single_object(&device, NULL,
 						ACPI_BUS_TYPE_POWER_BUTTON,
+						ACPI_STA_DEFAULT,
 						&ops);
 	}
 
 	if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {
-		result = acpi_add_single_object(&device, acpi_root,
-						NULL,
+		result = acpi_add_single_object(&device, NULL,
 						ACPI_BUS_TYPE_SLEEP_BUTTON,
+						ACPI_STA_DEFAULT,
 						&ops);
 	}
 
@@ -1621,24 +1469,15 @@
 	}
 
 	/*
-	 * Create the root device in the bus's device tree
-	 */
-	result = acpi_add_single_object(&acpi_root, NULL, ACPI_ROOT_OBJECT,
-					ACPI_BUS_TYPE_SYSTEM, &ops);
-	if (result)
-		goto Done;
-
-	/*
 	 * Enumerate devices in the ACPI namespace.
 	 */
-	result = acpi_bus_scan_fixed(acpi_root);
+	result = acpi_bus_scan(ACPI_ROOT_OBJECT, &ops, &acpi_root);
 
 	if (!result)
-		result = acpi_bus_scan(acpi_root, &ops);
+		result = acpi_bus_scan_fixed();
 
 	if (result)
 		acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
 
-Done:
 	return result;
 }
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 94b1a4c..a4fddb2 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1986,6 +1986,10 @@
 
 	result = acpi_video_device_lcd_set_level(device, level_next);
 
+	if (!result)
+		backlight_force_update(device->backlight,
+				       BACKLIGHT_UPDATE_HOTKEY);
+
 out:
 	if (result)
 		printk(KERN_ERR PREFIX "Failed to switch the brightness\n");
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index d6f36c0..870f12c 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -131,7 +131,7 @@
 struct agp_bridge_data {
 	const struct agp_version *version;
 	const struct agp_bridge_driver *driver;
-	struct vm_operations_struct *vm_ops;
+	const struct vm_operations_struct *vm_ops;
 	void *previous_size;
 	void *current_size;
 	void *dev_private_data;
diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c
index 5ea4da8..dd84af4 100644
--- a/drivers/char/agp/alpha-agp.c
+++ b/drivers/char/agp/alpha-agp.c
@@ -40,7 +40,7 @@
 	{ 0, 0, 0 }, /* filled in by alpha_core_agp_setup */
 };
 
-struct vm_operations_struct alpha_core_agp_vm_ops = {
+static const struct vm_operations_struct alpha_core_agp_vm_ops = {
 	.fault = alpha_core_agp_vm_fault,
 };
 
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 25ce15b..a632f25 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -678,7 +678,7 @@
 EXPORT_SYMBOL_GPL(hvc_poll);
 
 /**
- * hvc_resize() - Update terminal window size information.
+ * __hvc_resize() - Update terminal window size information.
  * @hp:		HVC console pointer
  * @ws:		Terminal window size structure
  *
@@ -687,12 +687,12 @@
  *
  * Locking:	Locking free; the function MUST be called holding hp->lock
  */
-void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+void __hvc_resize(struct hvc_struct *hp, struct winsize ws)
 {
 	hp->ws = ws;
 	schedule_work(&hp->tty_resize);
 }
-EXPORT_SYMBOL_GPL(hvc_resize);
+EXPORT_SYMBOL_GPL(__hvc_resize);
 
 /*
  * This kthread is either polling or interrupt driven.  This is determined by
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index 3c85d78..10950ca 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -28,6 +28,7 @@
 #define HVC_CONSOLE_H
 #include <linux/kref.h>
 #include <linux/tty.h>
+#include <linux/spinlock.h>
 
 /*
  * This is the max number of console adapters that can/will be found as
@@ -88,7 +89,16 @@
 void hvc_kick(void);
 
 /* Resize hvc tty terminal window */
-extern void hvc_resize(struct hvc_struct *hp, struct winsize ws);
+extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws);
+
+static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hp->lock, flags);
+	__hvc_resize(hp, ws);
+	spin_unlock_irqrestore(&hp->lock, flags);
+}
 
 /* default notifier for irq based notification */
 extern int notifier_add_irq(struct hvc_struct *hp, int data);
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 0ecac7e..b8a5d65 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -273,7 +273,9 @@
 	case MSG_TYPE_WINSIZE:
 		if (rb->mbuf->datalen != sizeof(struct winsize))
 			break;
-		hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
+		/* The caller must ensure that the hvc is locked, which
+		 * is the case when called from hvc_iucv_get_chars() */
+		__hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
 		break;
 
 	case MSG_TYPE_ERROR:	/* ignored ... */
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 00dd3de..06aad08 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -116,7 +116,7 @@
 	if (!res)
 		return -ENOENT;
 
-	mem = request_mem_region(res->start, res->end - res->start + 1,
+	mem = request_mem_region(res->start, resource_size(res),
 				 pdev->name);
 	if (mem == NULL) {
 		ret = -EBUSY;
@@ -124,7 +124,7 @@
 	}
 
 	dev_set_drvdata(&pdev->dev, mem);
-	rng_base = ioremap(res->start, res->end - res->start + 1);
+	rng_base = ioremap(res->start, resource_size(res));
 	if (!rng_base) {
 		ret = -ENOMEM;
 		goto err_ioremap;
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 6c8b65d..a074fce 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -301,7 +301,7 @@
 }
 #endif
 
-static struct vm_operations_struct mmap_mem_ops = {
+static const struct vm_operations_struct mmap_mem_ops = {
 #ifdef CONFIG_HAVE_IOREMAP_PROT
 	.access = generic_access_phys
 #endif
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 30f095a..1997270 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -239,7 +239,7 @@
 	return VM_FAULT_NOPAGE;
 }
 
-static struct vm_operations_struct mspec_vm_ops = {
+static const struct vm_operations_struct mspec_vm_ops = {
 	.open = mspec_open,
 	.close = mspec_close,
 	.fault = mspec_fault,
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 53761ce..e066c4f 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -261,6 +261,9 @@
 	return 0;
 }
 
+/* Traditional BSD devices */
+#ifdef CONFIG_LEGACY_PTYS
+
 static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
 {
 	struct tty_struct *o_tty;
@@ -310,24 +313,6 @@
 	return -ENOMEM;
 }
 
-
-static const struct tty_operations pty_ops = {
-	.install = pty_install,
-	.open = pty_open,
-	.close = pty_close,
-	.write = pty_write,
-	.write_room = pty_write_room,
-	.flush_buffer = pty_flush_buffer,
-	.chars_in_buffer = pty_chars_in_buffer,
-	.unthrottle = pty_unthrottle,
-	.set_termios = pty_set_termios,
-	.resize = pty_resize
-};
-
-/* Traditional BSD devices */
-#ifdef CONFIG_LEGACY_PTYS
-static struct tty_driver *pty_driver, *pty_slave_driver;
-
 static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
@@ -341,7 +326,12 @@
 static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
 module_param(legacy_count, int, 0);
 
-static const struct tty_operations pty_ops_bsd = {
+/*
+ * The master side of a pty can do TIOCSPTLCK and thus
+ * has pty_bsd_ioctl.
+ */
+static const struct tty_operations master_pty_ops_bsd = {
+	.install = pty_install,
 	.open = pty_open,
 	.close = pty_close,
 	.write = pty_write,
@@ -354,8 +344,23 @@
 	.resize = pty_resize
 };
 
+static const struct tty_operations slave_pty_ops_bsd = {
+	.install = pty_install,
+	.open = pty_open,
+	.close = pty_close,
+	.write = pty_write,
+	.write_room = pty_write_room,
+	.flush_buffer = pty_flush_buffer,
+	.chars_in_buffer = pty_chars_in_buffer,
+	.unthrottle = pty_unthrottle,
+	.set_termios = pty_set_termios,
+	.resize = pty_resize
+};
+
 static void __init legacy_pty_init(void)
 {
+	struct tty_driver *pty_driver, *pty_slave_driver;
+
 	if (legacy_count <= 0)
 		return;
 
@@ -383,7 +388,7 @@
 	pty_driver->init_termios.c_ospeed = 38400;
 	pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
 	pty_driver->other = pty_slave_driver;
-	tty_set_operations(pty_driver, &pty_ops);
+	tty_set_operations(pty_driver, &master_pty_ops_bsd);
 
 	pty_slave_driver->owner = THIS_MODULE;
 	pty_slave_driver->driver_name = "pty_slave";
@@ -399,7 +404,7 @@
 	pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
 					TTY_DRIVER_REAL_RAW;
 	pty_slave_driver->other = pty_driver;
-	tty_set_operations(pty_slave_driver, &pty_ops);
+	tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
 
 	if (tty_register_driver(pty_driver))
 		panic("Couldn't register pty driver");
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index ea18a12..59499ee 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1389,7 +1389,7 @@
  *	of ttys that the driver keeps.
  *
  *	This method gets called from a work queue so that the driver private
- *	shutdown ops can sleep (needed for USB at least)
+ *	cleanup ops can sleep (needed for USB at least)
  */
 static void release_one_tty(struct work_struct *work)
 {
@@ -1397,10 +1397,9 @@
 		container_of(work, struct tty_struct, hangup_work);
 	struct tty_driver *driver = tty->driver;
 
-	if (tty->ops->shutdown)
-		tty->ops->shutdown(tty);
-	else
-		tty_shutdown(tty);
+	if (tty->ops->cleanup)
+		tty->ops->cleanup(tty);
+
 	tty->magic = 0;
 	tty_driver_kref_put(driver);
 	module_put(driver->owner);
@@ -1415,6 +1414,12 @@
 static void queue_release_one_tty(struct kref *kref)
 {
 	struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+
+	if (tty->ops->shutdown)
+		tty->ops->shutdown(tty);
+	else
+		tty_shutdown(tty);
+
 	/* The hangup queue is now free so we can reuse it rather than
 	   waste a chunk of memory for each port */
 	INIT_WORK(&tty->hangup_work, release_one_tty);
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index ba728ad..8e7b0eb 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -482,6 +482,7 @@
 	list_for_each_entry_safe(mode, t, &connector->user_modes, head)
 		drm_mode_remove(connector, mode);
 
+	kfree(connector->fb_helper_private);
 	mutex_lock(&dev->mode_config.mutex);
 	drm_mode_object_put(dev, &connector->base);
 	list_del(&connector->head);
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index fe86974..1fe4e1d 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -32,6 +32,7 @@
 #include "drmP.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
 
 static void drm_mode_validate_flag(struct drm_connector *connector,
 				   int flags)
@@ -90,7 +91,15 @@
 	list_for_each_entry_safe(mode, t, &connector->modes, head)
 		mode->status = MODE_UNVERIFIED;
 
-	connector->status = connector->funcs->detect(connector);
+	if (connector->force) {
+		if (connector->force == DRM_FORCE_ON)
+			connector->status = connector_status_connected;
+		else
+			connector->status = connector_status_disconnected;
+		if (connector->funcs->force)
+			connector->funcs->force(connector);
+	} else
+		connector->status = connector->funcs->detect(connector);
 
 	if (connector->status == connector_status_disconnected) {
 		DRM_DEBUG_KMS("%s is disconnected\n",
@@ -267,6 +276,65 @@
 	return NULL;
 }
 
+static bool drm_has_cmdline_mode(struct drm_connector *connector)
+{
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+	if (!fb_help_conn)
+		return false;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	return cmdline_mode->specified;
+}
+
+static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_connector *connector, int width, int height)
+{
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+	struct drm_display_mode *mode = NULL;
+
+	if (!fb_help_conn)
+		return mode;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	if (cmdline_mode->specified == false)
+		return mode;
+
+	/* attempt to find a matching mode in the list of modes
+	 *  we have gotten so far, if not add a CVT mode that conforms
+	 */
+	if (cmdline_mode->rb || cmdline_mode->margins)
+		goto create_mode;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		/* check width/height */
+		if (mode->hdisplay != cmdline_mode->xres ||
+		    mode->vdisplay != cmdline_mode->yres)
+			continue;
+
+		if (cmdline_mode->refresh_specified) {
+			if (mode->vrefresh != cmdline_mode->refresh)
+				continue;
+		}
+
+		if (cmdline_mode->interlace) {
+			if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+				continue;
+		}
+		return mode;
+	}
+
+create_mode:
+	mode = drm_cvt_mode(connector->dev, cmdline_mode->xres,
+			    cmdline_mode->yres,
+			    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+			    cmdline_mode->rb, cmdline_mode->interlace,
+			    cmdline_mode->margins);
+	list_add(&mode->head, &connector->modes);
+	return mode;
+}
+
 static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
 {
 	bool enable;
@@ -317,10 +385,16 @@
 			continue;
 		}
 
-		DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
-			  connector->base.id);
+		DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
+			      connector->base.id);
 
-		modes[i] = drm_has_preferred_mode(connector, width, height);
+		/* got for command line mode first */
+		modes[i] = drm_pick_cmdline_mode(connector, width, height);
+		if (!modes[i]) {
+			DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
+				      connector->base.id);
+			modes[i] = drm_has_preferred_mode(connector, width, height);
+		}
 		/* No preferred modes, pick one off the list */
 		if (!modes[i] && !list_empty(&connector->modes)) {
 			list_for_each_entry(modes[i], &connector->modes, head)
@@ -369,6 +443,8 @@
 	my_score = 1;
 	if (connector->status == connector_status_connected)
 		my_score++;
+	if (drm_has_cmdline_mode(connector))
+		my_score++;
 	if (drm_has_preferred_mode(connector, width, height))
 		my_score++;
 
@@ -943,6 +1019,8 @@
 {
 	int count = 0;
 
+	drm_fb_helper_parse_command_line(dev);
+
 	count = drm_helper_probe_connector_modes(dev,
 						 dev->mode_config.max_width,
 						 dev->mode_config.max_height);
@@ -950,7 +1028,7 @@
 	/*
 	 * we shouldn't end up with no modes here.
 	 */
-	WARN(!count, "Connected connector with 0 modes\n");
+	WARN(!count, "No connectors reported connected with modes\n");
 
 	drm_setup_crtcs(dev);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 90d76ba..3c0d2b3 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -109,7 +109,9 @@
 
 
 /* Valid EDID header has these bytes */
-static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+static const u8 edid_header[] = {
+	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
+};
 
 /**
  * edid_is_valid - sanity check EDID data
@@ -500,6 +502,19 @@
 	}
 	return mode;
 }
+
+/*
+ * 0 is reserved.  The spec says 0x01 fill for unused timings.  Some old
+ * monitors fill with ascii space (0x20) instead.
+ */
+static int
+bad_std_timing(u8 a, u8 b)
+{
+	return (a == 0x00 && b == 0x00) ||
+	       (a == 0x01 && b == 0x01) ||
+	       (a == 0x20 && b == 0x20);
+}
+
 /**
  * drm_mode_std - convert standard mode info (width, height, refresh) into mode
  * @t: standard timing params
@@ -513,6 +528,7 @@
  */
 struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 				      struct std_timing *t,
+				      int revision,
 				      int timing_level)
 {
 	struct drm_display_mode *mode;
@@ -523,14 +539,20 @@
 	unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
 		>> EDID_TIMING_VFREQ_SHIFT;
 
+	if (bad_std_timing(t->hsize, t->vfreq_aspect))
+		return NULL;
+
 	/* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
 	hsize = t->hsize * 8 + 248;
 	/* vrefresh_rate = vfreq + 60 */
 	vrefresh_rate = vfreq + 60;
 	/* the vdisplay is calculated based on the aspect ratio */
-	if (aspect_ratio == 0)
-		vsize = (hsize * 10) / 16;
-	else if (aspect_ratio == 1)
+	if (aspect_ratio == 0) {
+		if (revision < 3)
+			vsize = hsize;
+		else
+			vsize = (hsize * 10) / 16;
+	} else if (aspect_ratio == 1)
 		vsize = (hsize * 3) / 4;
 	else if (aspect_ratio == 2)
 		vsize = (hsize * 4) / 5;
@@ -538,7 +560,8 @@
 		vsize = (hsize * 9) / 16;
 	/* HDTV hack */
 	if (hsize == 1360 && vsize == 765 && vrefresh_rate == 60) {
-		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+				    false);
 		mode->hdisplay = 1366;
 		mode->vsync_start = mode->vsync_start - 1;
 		mode->vsync_end = mode->vsync_end - 1;
@@ -557,7 +580,8 @@
 		mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
 		break;
 	case LEVEL_CVT:
-		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+				    false);
 		break;
 	}
 	return mode;
@@ -779,7 +803,7 @@
 			continue;
 
 		newmode = drm_mode_std(dev, &edid->standard_timings[i],
-					timing_level);
+				       edid->revision, timing_level);
 		if (newmode) {
 			drm_mode_probed_add(connector, newmode);
 			modes++;
@@ -829,13 +853,13 @@
 			case EDID_DETAIL_MONITOR_CPDATA:
 				break;
 			case EDID_DETAIL_STD_MODES:
-				/* Five modes per detailed section */
-				for (j = 0; j < 5; i++) {
+				for (j = 0; j < 6; i++) {
 					struct std_timing *std;
 					struct drm_display_mode *newmode;
 
 					std = &data->data.timings[j];
 					newmode = drm_mode_std(dev, std,
+							       edid->revision,
 							       timing_level);
 					if (newmode) {
 						drm_mode_probed_add(connector, newmode);
@@ -964,7 +988,9 @@
 				struct drm_display_mode *newmode;
 
 				std = &data->data.timings[j];
-				newmode = drm_mode_std(dev, std, timing_level);
+				newmode = drm_mode_std(dev, std,
+						       edid->revision,
+						       timing_level);
 				if (newmode) {
 					drm_mode_probed_add(connector, newmode);
 					modes++;
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 2c46713..819ddcb 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -40,6 +40,199 @@
 
 static LIST_HEAD(kernel_fb_helper_list);
 
+int drm_fb_helper_add_connector(struct drm_connector *connector)
+{
+	connector->fb_helper_private = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL);
+	if (!connector->fb_helper_private)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_fb_helper_add_connector);
+
+static int my_atoi(const char *name)
+{
+	int val = 0;
+
+	for (;; name++) {
+		switch (*name) {
+		case '0' ... '9':
+			val = 10*val+(*name-'0');
+			break;
+		default:
+			return val;
+		}
+	}
+}
+
+/**
+ * drm_fb_helper_connector_parse_command_line - parse command line for connector
+ * @connector - connector to parse line for
+ * @mode_option - per connector mode option
+ *
+ * This parses the connector specific then generic command lines for
+ * modes and options to configure the connector.
+ *
+ * This uses the same parameters as the fb modedb.c, except for extra
+ *	<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ *
+ * enable/enable Digital/disable bit at the end
+ */
+static bool drm_fb_helper_connector_parse_command_line(struct drm_connector *connector,
+						       const char *mode_option)
+{
+	const char *name;
+	unsigned int namelen;
+	int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
+	unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0;
+	int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0;
+	int i;
+	enum drm_connector_force force = DRM_FORCE_UNSPECIFIED;
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+	if (!fb_help_conn)
+		return false;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	if (!mode_option)
+		mode_option = fb_mode_option;
+
+	if (!mode_option) {
+		cmdline_mode->specified = false;
+		return false;
+	}
+
+	name = mode_option;
+	namelen = strlen(name);
+	for (i = namelen-1; i >= 0; i--) {
+		switch (name[i]) {
+		case '@':
+			namelen = i;
+			if (!refresh_specified && !bpp_specified &&
+			    !yres_specified) {
+				refresh = my_atoi(&name[i+1]);
+				refresh_specified = 1;
+				if (cvt || rb)
+					cvt = 0;
+			} else
+				goto done;
+			break;
+		case '-':
+			namelen = i;
+			if (!bpp_specified && !yres_specified) {
+				bpp = my_atoi(&name[i+1]);
+				bpp_specified = 1;
+				if (cvt || rb)
+					cvt = 0;
+			} else
+				goto done;
+			break;
+		case 'x':
+			if (!yres_specified) {
+				yres = my_atoi(&name[i+1]);
+				yres_specified = 1;
+			} else
+				goto done;
+		case '0' ... '9':
+			break;
+		case 'M':
+			if (!yres_specified)
+				cvt = 1;
+			break;
+		case 'R':
+			if (!cvt)
+				rb = 1;
+			break;
+		case 'm':
+			if (!cvt)
+				margins = 1;
+			break;
+		case 'i':
+			if (!cvt)
+				interlace = 1;
+			break;
+		case 'e':
+			force = DRM_FORCE_ON;
+			break;
+		case 'D':
+			if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) ||
+			    (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
+				force = DRM_FORCE_ON;
+			else
+				force = DRM_FORCE_ON_DIGITAL;
+			break;
+		case 'd':
+			force = DRM_FORCE_OFF;
+			break;
+		default:
+			goto done;
+		}
+	}
+	if (i < 0 && yres_specified) {
+		xres = my_atoi(name);
+		res_specified = 1;
+	}
+done:
+
+	DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+		drm_get_connector_name(connector), xres, yres,
+		(refresh) ? refresh : 60, (rb) ? " reduced blanking" :
+		"", (margins) ? " with margins" : "", (interlace) ?
+		" interlaced" : "");
+
+	if (force) {
+		const char *s;
+		switch (force) {
+		case DRM_FORCE_OFF: s = "OFF"; break;
+		case DRM_FORCE_ON_DIGITAL: s = "ON - dig"; break;
+		default:
+		case DRM_FORCE_ON: s = "ON"; break;
+		}
+
+		DRM_INFO("forcing %s connector %s\n",
+			 drm_get_connector_name(connector), s);
+		connector->force = force;
+	}
+
+	if (res_specified) {
+		cmdline_mode->specified = true;
+		cmdline_mode->xres = xres;
+		cmdline_mode->yres = yres;
+	}
+
+	if (refresh_specified) {
+		cmdline_mode->refresh_specified = true;
+		cmdline_mode->refresh = refresh;
+	}
+
+	if (bpp_specified) {
+		cmdline_mode->bpp_specified = true;
+		cmdline_mode->bpp = bpp;
+	}
+	cmdline_mode->rb = rb ? true : false;
+	cmdline_mode->cvt = cvt  ? true : false;
+	cmdline_mode->interlace = interlace ? true : false;
+
+	return true;
+}
+
+int drm_fb_helper_parse_command_line(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		char *option = NULL;
+
+		/* do something on return - turn off connector maybe */
+		if (fb_get_options(drm_get_connector_name(connector), &option))
+			continue;
+
+		drm_fb_helper_connector_parse_command_line(connector, option);
+	}
+	return 0;
+}
+
 bool drm_fb_helper_force_kernel_mode(void)
 {
 	int i = 0;
@@ -87,6 +280,7 @@
 }
 EXPORT_SYMBOL(drm_fb_helper_restore);
 
+#ifdef CONFIG_MAGIC_SYSRQ
 static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
 {
 	drm_fb_helper_restore();
@@ -103,6 +297,7 @@
 	.help_msg = "force-fb(V)",
 	.action_msg = "Restore framebuffer console",
 };
+#endif
 
 static void drm_fb_helper_on(struct fb_info *info)
 {
@@ -484,6 +679,8 @@
 						   uint32_t fb_height,
 						   uint32_t surface_width,
 						   uint32_t surface_height,
+						   uint32_t surface_depth,
+						   uint32_t surface_bpp,
 						   struct drm_framebuffer **fb_ptr))
 {
 	struct drm_crtc *crtc;
@@ -497,8 +694,43 @@
 	struct drm_framebuffer *fb;
 	struct drm_mode_set *modeset = NULL;
 	struct drm_fb_helper *fb_helper;
+	uint32_t surface_depth = 24, surface_bpp = 32;
 
 	/* first up get a count of crtcs now in use and new min/maxes width/heights */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+
+		struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+		if (!fb_help_conn)
+			continue;
+		
+		cmdline_mode = &fb_help_conn->cmdline_mode;
+
+		if (cmdline_mode->bpp_specified) {
+			switch (cmdline_mode->bpp) {
+			case 8:
+				surface_depth = surface_bpp = 8;
+				break;
+			case 15:
+				surface_depth = 15;
+				surface_bpp = 16;
+				break;
+			case 16:
+				surface_depth = surface_bpp = 16;
+				break;
+			case 24:
+				surface_depth = surface_bpp = 24;
+				break;
+			case 32:
+				surface_depth = 24;
+				surface_bpp = 32;
+				break;
+			}
+			break;
+		}
+	}
+
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		if (drm_helper_crtc_in_use(crtc)) {
 			if (crtc->desired_mode) {
@@ -527,7 +759,8 @@
 	/* do we have an fb already? */
 	if (list_empty(&dev->mode_config.fb_kernel_list)) {
 		ret = (*fb_create)(dev, fb_width, fb_height, surface_width,
-				   surface_height, &fb);
+				   surface_height, surface_depth, surface_bpp,
+				   &fb);
 		if (ret)
 			return -EINVAL;
 		new_fb = 1;
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 49404ce..51f6772 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -88,7 +88,7 @@
 #define HV_FACTOR			1000
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 				      int vdisplay, int vrefresh,
-				      bool reduced, bool interlaced)
+				      bool reduced, bool interlaced, bool margins)
 {
 	/* 1) top/bottom margin size (% of height) - default: 1.8, */
 #define	CVT_MARGIN_PERCENTAGE		18
@@ -101,7 +101,6 @@
 	/* Pixel Clock step (kHz) */
 #define CVT_CLOCK_STEP			250
 	struct drm_display_mode *drm_mode;
-	bool margins = false;
 	unsigned int vfieldrate, hperiod;
 	int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync;
 	int interlace;
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index 7e1fbe5..4ac900f 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -369,28 +369,28 @@
 }
 
 /** AGP virtual memory operations */
-static struct vm_operations_struct drm_vm_ops = {
+static const struct vm_operations_struct drm_vm_ops = {
 	.fault = drm_vm_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_close,
 };
 
 /** Shared virtual memory operations */
-static struct vm_operations_struct drm_vm_shm_ops = {
+static const struct vm_operations_struct drm_vm_shm_ops = {
 	.fault = drm_vm_shm_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_shm_close,
 };
 
 /** DMA virtual memory operations */
-static struct vm_operations_struct drm_vm_dma_ops = {
+static const struct vm_operations_struct drm_vm_dma_ops = {
 	.fault = drm_vm_dma_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_close,
 };
 
 /** Scatter-gather virtual memory operations */
-static struct vm_operations_struct drm_vm_sg_ops = {
+static const struct vm_operations_struct drm_vm_sg_ops = {
 	.fault = drm_vm_sg_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_close,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 7ba4a23..e85d7e9 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -110,6 +110,7 @@
 static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 			  uint32_t fb_height, uint32_t surface_width,
 			  uint32_t surface_height,
+			  uint32_t surface_depth, uint32_t surface_bpp,
 			  struct drm_framebuffer **fb_p)
 {
 	struct fb_info *info;
@@ -125,9 +126,9 @@
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
 
-	mode_cmd.bpp = 32;
+	mode_cmd.bpp = surface_bpp;
 	mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 1) / 8), 64);
-	mode_cmd.depth = 24;
+	mode_cmd.depth = surface_depth;
 
 	size = mode_cmd.pitch * mode_cmd.height;
 	size = ALIGN(size, PAGE_SIZE);
diff --git a/drivers/gpu/drm/radeon/.gitignore b/drivers/gpu/drm/radeon/.gitignore
new file mode 100644
index 0000000..403eb3a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/.gitignore
@@ -0,0 +1,3 @@
+mkregtable
+*_reg_safe.h
+
diff --git a/drivers/gpu/drm/radeon/avivod.h b/drivers/gpu/drm/radeon/avivod.h
index e2b92c4..d4e6e6e 100644
--- a/drivers/gpu/drm/radeon/avivod.h
+++ b/drivers/gpu/drm/radeon/avivod.h
@@ -57,13 +57,4 @@
 #define	VGA_RENDER_CONTROL				0x0300
 #define		VGA_VSTATUS_CNTL_MASK				0x00030000
 
-/* AVIVO disable VGA rendering */
-static inline void radeon_avivo_vga_render_disable(struct radeon_device *rdev)
-{
-	u32 vga_render;
-	vga_render = RREG32(VGA_RENDER_CONTROL);
-	vga_render &= ~VGA_VSTATUS_CNTL_MASK;
-	WREG32(VGA_RENDER_CONTROL, vga_render);
-}
-
 #endif
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index be51c5f..e6cce24 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -863,13 +863,11 @@
 void r100_cs_dump_packet(struct radeon_cs_parser *p,
 			 struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	volatile uint32_t *ib;
 	unsigned i;
 	unsigned idx;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx;
 	for (i = 0; i <= (pkt->count + 1); i++, idx++) {
 		DRM_INFO("ib[%d]=0x%08X\n", idx, ib[idx]);
@@ -896,7 +894,7 @@
 			  idx, ib_chunk->length_dw);
 		return -EINVAL;
 	}
-	header = ib_chunk->kdata[idx];
+	header = radeon_get_ib_value(p, idx);
 	pkt->idx = idx;
 	pkt->type = CP_PACKET_GET_TYPE(header);
 	pkt->count = CP_PACKET_GET_COUNT(header);
@@ -939,7 +937,6 @@
  */
 int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct drm_mode_object *obj;
 	struct drm_crtc *crtc;
 	struct radeon_crtc *radeon_crtc;
@@ -947,8 +944,9 @@
 	int crtc_id;
 	int r;
 	uint32_t header, h_idx, reg;
+	volatile uint32_t *ib;
 
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	ib = p->ib->ptr;
 
 	/* parse the wait until */
 	r = r100_cs_packet_parse(p, &waitreloc, p->idx);
@@ -963,24 +961,24 @@
 		return r;
 	}
 
-	if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+	if (radeon_get_ib_value(p, waitreloc.idx + 1) != RADEON_WAIT_CRTC_VLINE) {
 		DRM_ERROR("vline wait had illegal wait until\n");
 		r = -EINVAL;
 		return r;
 	}
 
 	/* jump over the NOP */
-	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+	r = r100_cs_packet_parse(p, &p3reloc, p->idx + waitreloc.count + 2);
 	if (r)
 		return r;
 
 	h_idx = p->idx - 2;
-	p->idx += waitreloc.count;
-	p->idx += p3reloc.count;
+	p->idx += waitreloc.count + 2;
+	p->idx += p3reloc.count + 2;
 
-	header = ib_chunk->kdata[h_idx];
-	crtc_id = ib_chunk->kdata[h_idx + 5];
-	reg = ib_chunk->kdata[h_idx] >> 2;
+	header = radeon_get_ib_value(p, h_idx);
+	crtc_id = radeon_get_ib_value(p, h_idx + 5);
+	reg = header >> 2;
 	mutex_lock(&p->rdev->ddev->mode_config.mutex);
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
@@ -994,16 +992,16 @@
 
 	if (!crtc->enabled) {
 		/* if the CRTC isn't enabled - we need to nop out the wait until */
-		ib_chunk->kdata[h_idx + 2] = PACKET2(0);
-		ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+		ib[h_idx + 2] = PACKET2(0);
+		ib[h_idx + 3] = PACKET2(0);
 	} else if (crtc_id == 1) {
 		switch (reg) {
 		case AVIVO_D1MODE_VLINE_START_END:
-			header &= R300_CP_PACKET0_REG_MASK;
+			header &= ~R300_CP_PACKET0_REG_MASK;
 			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
 			break;
 		case RADEON_CRTC_GUI_TRIG_VLINE:
-			header &= R300_CP_PACKET0_REG_MASK;
+			header &= ~R300_CP_PACKET0_REG_MASK;
 			header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
 			break;
 		default:
@@ -1011,8 +1009,8 @@
 			r = -EINVAL;
 			goto out;
 		}
-		ib_chunk->kdata[h_idx] = header;
-		ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+		ib[h_idx] = header;
+		ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
 	}
 out:
 	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
@@ -1033,7 +1031,6 @@
 int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 			      struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -1044,7 +1041,6 @@
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -1057,7 +1053,7 @@
 		r100_cs_dump_packet(p, &p3reloc);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -1126,7 +1122,6 @@
 			      struct radeon_cs_packet *pkt,
 			      unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
@@ -1134,11 +1129,13 @@
 	int r;
 	int i, face;
 	u32 tile_flags = 0;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
 
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch (reg) {
 	case RADEON_CRTC_GUI_TRIG_VLINE:
 		r = r100_cs_packet_parse_vline(p);
@@ -1166,8 +1163,8 @@
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_RB3D_COLOROFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1178,8 +1175,8 @@
 			return r;
 		}
 		track->cb[0].robj = reloc->robj;
-		track->cb[0].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[0].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_TXOFFSET_0:
 	case RADEON_PP_TXOFFSET_1:
@@ -1192,7 +1189,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T0_0:
@@ -1208,8 +1205,8 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[0].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[0].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[0].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T1_0:
@@ -1225,8 +1222,8 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[1].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[1].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[1].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T2_0:
@@ -1242,12 +1239,12 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[2].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[2].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[2].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_RE_WIDTH_HEIGHT:
-		track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+		track->maxy = ((idx_value >> 16) & 0x7FF);
 		break;
 	case RADEON_RB3D_COLORPITCH:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1263,17 +1260,17 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+		track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
 		break;
 	case RADEON_RB3D_DEPTHPITCH:
-		track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+		track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
 		break;
 	case RADEON_RB3D_CNTL:
-		switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+		switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
 		case 7:
 		case 8:
 		case 9:
@@ -1291,13 +1288,13 @@
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+				  ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
 			return -EINVAL;
 		}
-		track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+		track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
 		break;
 	case RADEON_RB3D_ZSTENCILCNTL:
-		switch (ib_chunk->kdata[idx] & 0xf) {
+		switch (idx_value & 0xf) {
 		case 0:
 			track->zb.cpp = 2;
 			break;
@@ -1321,44 +1318,44 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_CNTL:
 		{
-			uint32_t temp = ib_chunk->kdata[idx] >> 4;
+			uint32_t temp = idx_value >> 4;
 			for (i = 0; i < track->num_texture; i++)
 				track->textures[i].enabled = !!(temp & (1 << i));
 		}
 		break;
 	case RADEON_SE_VF_CNTL:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case RADEON_SE_VTX_FMT:
-		track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx]);
+		track->vtx_size = r100_get_vtx_size(idx_value);
 		break;
 	case RADEON_PP_TEX_SIZE_0:
 	case RADEON_PP_TEX_SIZE_1:
 	case RADEON_PP_TEX_SIZE_2:
 		i = (reg - RADEON_PP_TEX_SIZE_0) / 8;
-		track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
-		track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+		track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+		track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
 		break;
 	case RADEON_PP_TEX_PITCH_0:
 	case RADEON_PP_TEX_PITCH_1:
 	case RADEON_PP_TEX_PITCH_2:
 		i = (reg - RADEON_PP_TEX_PITCH_0) / 8;
-		track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+		track->textures[i].pitch = idx_value + 32;
 		break;
 	case RADEON_PP_TXFILTER_0:
 	case RADEON_PP_TXFILTER_1:
 	case RADEON_PP_TXFILTER_2:
 		i = (reg - RADEON_PP_TXFILTER_0) / 24;
-		track->textures[i].num_levels = ((ib_chunk->kdata[idx] & RADEON_MAX_MIP_LEVEL_MASK)
+		track->textures[i].num_levels = ((idx_value & RADEON_MAX_MIP_LEVEL_MASK)
 						 >> RADEON_MAX_MIP_LEVEL_SHIFT);
-		tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+		tmp = (idx_value >> 23) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_w = false;
-		tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+		tmp = (idx_value >> 27) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_h = false;
 		break;
@@ -1366,16 +1363,16 @@
 	case RADEON_PP_TXFORMAT_1:
 	case RADEON_PP_TXFORMAT_2:
 		i = (reg - RADEON_PP_TXFORMAT_0) / 24;
-		if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_NON_POWER2) {
+		if (idx_value & RADEON_TXFORMAT_NON_POWER2) {
 			track->textures[i].use_pitch = 1;
 		} else {
 			track->textures[i].use_pitch = 0;
-			track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
-			track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+			track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+			track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
 		}
-		if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
+		if (idx_value & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
 			track->textures[i].tex_coord_type = 2;
-		switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+		switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
 		case RADEON_TXFORMAT_I8:
 		case RADEON_TXFORMAT_RGB332:
 		case RADEON_TXFORMAT_Y8:
@@ -1402,13 +1399,13 @@
 			track->textures[i].cpp = 4;
 			break;
 		}
-		track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
-		track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+		track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+		track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
 		break;
 	case RADEON_PP_CUBIC_FACES_0:
 	case RADEON_PP_CUBIC_FACES_1:
 	case RADEON_PP_CUBIC_FACES_2:
-		tmp = ib_chunk->kdata[idx];
+		tmp = idx_value;
 		i = (reg - RADEON_PP_CUBIC_FACES_0) / 4;
 		for (face = 0; face < 4; face++) {
 			track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
@@ -1427,15 +1424,14 @@
 					 struct radeon_cs_packet *pkt,
 					 struct radeon_object *robj)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	unsigned idx;
-
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	u32 value;
 	idx = pkt->idx + 1;
-	if ((ib_chunk->kdata[idx+2] + 1) > radeon_object_size(robj)) {
+	value = radeon_get_ib_value(p, idx + 2);
+	if ((value + 1) > radeon_object_size(robj)) {
 		DRM_ERROR("[drm] Buffer too small for PACKET3 INDX_BUFFER "
 			  "(need %u have %lu) !\n",
-			  ib_chunk->kdata[idx+2] + 1,
+			  value + 1,
 			  radeon_object_size(robj));
 		return -EINVAL;
 	}
@@ -1445,59 +1441,20 @@
 static int r100_packet3_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	unsigned idx;
-	unsigned i, c;
 	volatile uint32_t *ib;
 	int r;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
 	track = (struct r100_cs_track *)p->track;
 	switch (pkt->opcode) {
 	case PACKET3_3D_LOAD_VBPNTR:
-		c = ib_chunk->kdata[idx++];
-		track->num_arrays = c;
-		for (i = 0; i < (c - 1); i += 2, idx += 3) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 1].robj = reloc->robj;
-			track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
-			track->arrays[i + 1].esize &= 0x7F;
-		}
-		if (c & 1) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-		}
+		r = r100_packet3_load_vbpntr(p, pkt, idx);
+		if (r)
+			return r;
 		break;
 	case PACKET3_INDX_BUFFER:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1506,7 +1463,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx+1] = radeon_get_ib_value(p, idx+1) + ((u32)reloc->lobj.gpu_offset);
 		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
 		if (r) {
 			return r;
@@ -1520,27 +1477,27 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = radeon_get_ib_value(p, idx) + ((u32)reloc->lobj.gpu_offset);
 		track->num_arrays = 1;
-		track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx+2]);
+		track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 2));
 
 		track->arrays[0].robj = reloc->robj;
 		track->arrays[0].esize = track->vtx_size;
 
-		track->max_indx = ib_chunk->kdata[idx+1];
+		track->max_indx = radeon_get_ib_value(p, idx+1);
 
-		track->vap_vf_cntl = ib_chunk->kdata[idx+3];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx+3);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 	case PACKET3_3D_DRAW_IMMD:
-		if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
@@ -1548,11 +1505,11 @@
 		break;
 		/* triggers drawing using in-packet vertex data */
 	case PACKET3_3D_DRAW_IMMD_2:
-		if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		track->immd_dwords = pkt->count;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
@@ -1560,28 +1517,28 @@
 		break;
 		/* triggers drawing using in-packet vertex data */
 	case PACKET3_3D_DRAW_VBUF_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing of vertex buffers setup elsewhere */
 	case PACKET3_3D_DRAW_INDX_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing using indices to vertex buffer */
 	case PACKET3_3D_DRAW_VBUF:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing of vertex buffers setup elsewhere */
 	case PACKET3_3D_DRAW_INDX:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h
index 70a82ed..0daf0d7 100644
--- a/drivers/gpu/drm/radeon/r100_track.h
+++ b/drivers/gpu/drm/radeon/r100_track.h
@@ -84,6 +84,8 @@
 		       struct radeon_cs_packet *pkt,
 		       unsigned idx, unsigned reg);
 
+
+
 static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
 					  struct radeon_cs_packet *pkt,
 					  unsigned idx,
@@ -93,9 +95,7 @@
 	u32 tile_flags = 0;
 	u32 tmp;
 	struct radeon_cs_reloc *reloc;
-	struct radeon_cs_chunk *ib_chunk;
-
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	u32 value;
 
 	r = r100_cs_packet_next_reloc(p, &reloc);
 	if (r) {
@@ -104,7 +104,8 @@
 		r100_cs_dump_packet(p, pkt);
 		return r;
 	}
-	tmp = ib_chunk->kdata[idx] & 0x003fffff;
+	value = radeon_get_ib_value(p, idx);
+	tmp = value & 0x003fffff;
 	tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
 
 	if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
@@ -119,6 +120,64 @@
 	}
 
 	tmp |= tile_flags;
-	p->ib->ptr[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
+	p->ib->ptr[idx] = (value & 0x3fc00000) | tmp;
 	return 0;
 }
+
+static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
+					   struct radeon_cs_packet *pkt,
+					   int idx)
+{
+	unsigned c, i;
+	struct radeon_cs_reloc *reloc;
+	struct r100_cs_track *track;
+	int r = 0;
+	volatile uint32_t *ib;
+	u32 idx_value;
+
+	ib = p->ib->ptr;
+	track = (struct r100_cs_track *)p->track;
+	c = radeon_get_ib_value(p, idx++) & 0x1F;
+	track->num_arrays = c;
+	for (i = 0; i < (c - 1); i+=2, idx+=3) {
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+				  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		idx_value = radeon_get_ib_value(p, idx);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+
+		track->arrays[i + 0].esize = idx_value >> 8;
+		track->arrays[i + 0].robj = reloc->robj;
+		track->arrays[i + 0].esize &= 0x7F;
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+				  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx+2] = radeon_get_ib_value(p, idx + 2) + ((u32)reloc->lobj.gpu_offset);
+		track->arrays[i + 1].robj = reloc->robj;
+		track->arrays[i + 1].esize = idx_value >> 24;
+		track->arrays[i + 1].esize &= 0x7F;
+	}
+	if (c & 1) {
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		idx_value = radeon_get_ib_value(p, idx);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+		track->arrays[i + 0].robj = reloc->robj;
+		track->arrays[i + 0].esize = idx_value >> 8;
+		track->arrays[i + 0].esize &= 0x7F;
+	}
+	return r;
+}
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 568c74b..cf7fea5 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -96,7 +96,6 @@
 		       struct radeon_cs_packet *pkt,
 		       unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
@@ -105,11 +104,11 @@
 	int i;
 	int face;
 	u32 tile_flags = 0;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
-
+	idx_value = radeon_get_ib_value(p, idx);
 	switch (reg) {
 	case RADEON_CRTC_GUI_TRIG_VLINE:
 		r = r100_cs_packet_parse_vline(p);
@@ -137,8 +136,8 @@
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_RB3D_COLOROFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -149,8 +148,8 @@
 			return r;
 		}
 		track->cb[0].robj = reloc->robj;
-		track->cb[0].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[0].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R200_PP_TXOFFSET_0:
 	case R200_PP_TXOFFSET_1:
@@ -166,7 +165,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	case R200_PP_CUBIC_OFFSET_F1_0:
@@ -208,12 +207,12 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[i].cube_info[face - 1].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[i].cube_info[face - 1].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].cube_info[face - 1].robj = reloc->robj;
 		break;
 	case RADEON_RE_WIDTH_HEIGHT:
-		track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+		track->maxy = ((idx_value >> 16) & 0x7FF);
 		break;
 	case RADEON_RB3D_COLORPITCH:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -229,17 +228,17 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+		track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
 		break;
 	case RADEON_RB3D_DEPTHPITCH:
-		track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+		track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
 		break;
 	case RADEON_RB3D_CNTL:
-		switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+		switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
 		case 7:
 		case 8:
 		case 9:
@@ -257,18 +256,18 @@
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+				  ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
 			return -EINVAL;
 		}
-		if (ib_chunk->kdata[idx] & RADEON_DEPTHXY_OFFSET_ENABLE) {
+		if (idx_value & RADEON_DEPTHXY_OFFSET_ENABLE) {
 			DRM_ERROR("No support for depth xy offset in kms\n");
 			return -EINVAL;
 		}
 
-		track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+		track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
 		break;
 	case RADEON_RB3D_ZSTENCILCNTL:
-		switch (ib_chunk->kdata[idx] & 0xf) {
+		switch (idx_value & 0xf) {
 		case 0:
 			track->zb.cpp = 2;
 			break;
@@ -292,27 +291,27 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_CNTL:
 		{
-			uint32_t temp = ib_chunk->kdata[idx] >> 4;
+			uint32_t temp = idx_value >> 4;
 			for (i = 0; i < track->num_texture; i++)
 				track->textures[i].enabled = !!(temp & (1 << i));
 		}
 		break;
 	case RADEON_SE_VF_CNTL:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case 0x210c:
 		/* VAP_VF_MAX_VTX_INDX */
-		track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+		track->max_indx = idx_value & 0x00FFFFFFUL;
 		break;
 	case R200_SE_VTX_FMT_0:
-		track->vtx_size = r200_get_vtx_size_0(ib_chunk->kdata[idx]);
+		track->vtx_size = r200_get_vtx_size_0(idx_value);
 		break;
 	case R200_SE_VTX_FMT_1:
-		track->vtx_size += r200_get_vtx_size_1(ib_chunk->kdata[idx]);
+		track->vtx_size += r200_get_vtx_size_1(idx_value);
 		break;
 	case R200_PP_TXSIZE_0:
 	case R200_PP_TXSIZE_1:
@@ -321,8 +320,8 @@
 	case R200_PP_TXSIZE_4:
 	case R200_PP_TXSIZE_5:
 		i = (reg - R200_PP_TXSIZE_0) / 32;
-		track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
-		track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+		track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+		track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
 		break;
 	case R200_PP_TXPITCH_0:
 	case R200_PP_TXPITCH_1:
@@ -331,7 +330,7 @@
 	case R200_PP_TXPITCH_4:
 	case R200_PP_TXPITCH_5:
 		i = (reg - R200_PP_TXPITCH_0) / 32;
-		track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+		track->textures[i].pitch = idx_value + 32;
 		break;
 	case R200_PP_TXFILTER_0:
 	case R200_PP_TXFILTER_1:
@@ -340,12 +339,12 @@
 	case R200_PP_TXFILTER_4:
 	case R200_PP_TXFILTER_5:
 		i = (reg - R200_PP_TXFILTER_0) / 32;
-		track->textures[i].num_levels = ((ib_chunk->kdata[idx] & R200_MAX_MIP_LEVEL_MASK)
+		track->textures[i].num_levels = ((idx_value & R200_MAX_MIP_LEVEL_MASK)
 						 >> R200_MAX_MIP_LEVEL_SHIFT);
-		tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+		tmp = (idx_value >> 23) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_w = false;
-		tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+		tmp = (idx_value >> 27) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_h = false;
 		break;
@@ -364,8 +363,8 @@
 	case R200_PP_TXFORMAT_X_4:
 	case R200_PP_TXFORMAT_X_5:
 		i = (reg - R200_PP_TXFORMAT_X_0) / 32;
-		track->textures[i].txdepth = ib_chunk->kdata[idx] & 0x7;
-		tmp = (ib_chunk->kdata[idx] >> 16) & 0x3;
+		track->textures[i].txdepth = idx_value & 0x7;
+		tmp = (idx_value >> 16) & 0x3;
 		/* 2D, 3D, CUBE */
 		switch (tmp) {
 		case 0:
@@ -389,14 +388,14 @@
 	case R200_PP_TXFORMAT_4:
 	case R200_PP_TXFORMAT_5:
 		i = (reg - R200_PP_TXFORMAT_0) / 32;
-		if (ib_chunk->kdata[idx] & R200_TXFORMAT_NON_POWER2) {
+		if (idx_value & R200_TXFORMAT_NON_POWER2) {
 			track->textures[i].use_pitch = 1;
 		} else {
 			track->textures[i].use_pitch = 0;
-			track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
-			track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+			track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+			track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
 		}
-		switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+		switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
 		case R200_TXFORMAT_I8:
 		case R200_TXFORMAT_RGB332:
 		case R200_TXFORMAT_Y8:
@@ -424,8 +423,8 @@
 			track->textures[i].cpp = 4;
 			break;
 		}
-		track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
-		track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+		track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+		track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
 		break;
 	case R200_PP_CUBIC_FACES_0:
 	case R200_PP_CUBIC_FACES_1:
@@ -433,7 +432,7 @@
 	case R200_PP_CUBIC_FACES_3:
 	case R200_PP_CUBIC_FACES_4:
 	case R200_PP_CUBIC_FACES_5:
-		tmp = ib_chunk->kdata[idx];
+		tmp = idx_value;
 		i = (reg - R200_PP_CUBIC_FACES_0) / 32;
 		for (face = 0; face < 4; face++) {
 			track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index bb151ec..1ebea8c 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -697,17 +697,18 @@
 		struct radeon_cs_packet *pkt,
 		unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
 	uint32_t tmp, tile_flags = 0;
 	unsigned i;
 	int r;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch(reg) {
 	case AVIVO_D1MODE_VLINE_START_END:
 	case RADEON_CRTC_GUI_TRIG_VLINE:
@@ -738,8 +739,8 @@
 			return r;
 		}
 		track->cb[i].robj = reloc->robj;
-		track->cb[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R300_ZB_DEPTHOFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -750,8 +751,8 @@
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R300_TX_OFFSET_0:
 	case R300_TX_OFFSET_0+4:
@@ -777,32 +778,32 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	/* Tracked registers */
 	case 0x2084:
 		/* VAP_VF_CNTL */
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case 0x20B4:
 		/* VAP_VTX_SIZE */
-		track->vtx_size = ib_chunk->kdata[idx] & 0x7F;
+		track->vtx_size = idx_value & 0x7F;
 		break;
 	case 0x2134:
 		/* VAP_VF_MAX_VTX_INDX */
-		track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+		track->max_indx = idx_value & 0x00FFFFFFUL;
 		break;
 	case 0x43E4:
 		/* SC_SCISSOR1 */
-		track->maxy = ((ib_chunk->kdata[idx] >> 13) & 0x1FFF) + 1;
+		track->maxy = ((idx_value >> 13) & 0x1FFF) + 1;
 		if (p->rdev->family < CHIP_RV515) {
 			track->maxy -= 1440;
 		}
 		break;
 	case 0x4E00:
 		/* RB3D_CCTL */
-		track->num_cb = ((ib_chunk->kdata[idx] >> 5) & 0x3) + 1;
+		track->num_cb = ((idx_value >> 5) & 0x3) + 1;
 		break;
 	case 0x4E38:
 	case 0x4E3C:
@@ -825,13 +826,13 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= R300_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
 		i = (reg - 0x4E38) >> 2;
-		track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
-		switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
+		track->cb[i].pitch = idx_value & 0x3FFE;
+		switch (((idx_value >> 21) & 0xF)) {
 		case 9:
 		case 11:
 		case 12:
@@ -854,13 +855,13 @@
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> 21) & 0xF));
+				  ((idx_value >> 21) & 0xF));
 			return -EINVAL;
 		}
 		break;
 	case 0x4F00:
 		/* ZB_CNTL */
-		if (ib_chunk->kdata[idx] & 2) {
+		if (idx_value & 2) {
 			track->z_enabled = true;
 		} else {
 			track->z_enabled = false;
@@ -868,7 +869,7 @@
 		break;
 	case 0x4F10:
 		/* ZB_FORMAT */
-		switch ((ib_chunk->kdata[idx] & 0xF)) {
+		switch ((idx_value & 0xF)) {
 		case 0:
 		case 1:
 			track->zb.cpp = 2;
@@ -878,7 +879,7 @@
 			break;
 		default:
 			DRM_ERROR("Invalid z buffer format (%d) !\n",
-				  (ib_chunk->kdata[idx] & 0xF));
+				  (idx_value & 0xF));
 			return -EINVAL;
 		}
 		break;
@@ -897,17 +898,17 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= R300_DEPTHMICROTILE_TILED;;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
+		track->zb.pitch = idx_value & 0x3FFC;
 		break;
 	case 0x4104:
 		for (i = 0; i < 16; i++) {
 			bool enabled;
 
-			enabled = !!(ib_chunk->kdata[idx] & (1 << i));
+			enabled = !!(idx_value & (1 << i));
 			track->textures[i].enabled = enabled;
 		}
 		break;
@@ -929,9 +930,9 @@
 	case 0x44FC:
 		/* TX_FORMAT1_[0-15] */
 		i = (reg - 0x44C0) >> 2;
-		tmp = (ib_chunk->kdata[idx] >> 25) & 0x3;
+		tmp = (idx_value >> 25) & 0x3;
 		track->textures[i].tex_coord_type = tmp;
-		switch ((ib_chunk->kdata[idx] & 0x1F)) {
+		switch ((idx_value & 0x1F)) {
 		case R300_TX_FORMAT_X8:
 		case R300_TX_FORMAT_Y4X4:
 		case R300_TX_FORMAT_Z3Y3X2:
@@ -971,7 +972,7 @@
 			break;
 		default:
 			DRM_ERROR("Invalid texture format %u\n",
-				  (ib_chunk->kdata[idx] & 0x1F));
+				  (idx_value & 0x1F));
 			return -EINVAL;
 			break;
 		}
@@ -994,11 +995,11 @@
 	case 0x443C:
 		/* TX_FILTER0_[0-15] */
 		i = (reg - 0x4400) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x7;
+		tmp = idx_value & 0x7;
 		if (tmp == 2 || tmp == 4 || tmp == 6) {
 			track->textures[i].roundup_w = false;
 		}
-		tmp = (ib_chunk->kdata[idx] >> 3) & 0x7;
+		tmp = (idx_value >> 3) & 0x7;
 		if (tmp == 2 || tmp == 4 || tmp == 6) {
 			track->textures[i].roundup_h = false;
 		}
@@ -1021,12 +1022,12 @@
 	case 0x453C:
 		/* TX_FORMAT2_[0-15] */
 		i = (reg - 0x4500) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x3FFF;
+		tmp = idx_value & 0x3FFF;
 		track->textures[i].pitch = tmp + 1;
 		if (p->rdev->family >= CHIP_RV515) {
-			tmp = ((ib_chunk->kdata[idx] >> 15) & 1) << 11;
+			tmp = ((idx_value >> 15) & 1) << 11;
 			track->textures[i].width_11 = tmp;
-			tmp = ((ib_chunk->kdata[idx] >> 16) & 1) << 11;
+			tmp = ((idx_value >> 16) & 1) << 11;
 			track->textures[i].height_11 = tmp;
 		}
 		break;
@@ -1048,15 +1049,15 @@
 	case 0x44BC:
 		/* TX_FORMAT0_[0-15] */
 		i = (reg - 0x4480) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x7FF;
+		tmp = idx_value & 0x7FF;
 		track->textures[i].width = tmp + 1;
-		tmp = (ib_chunk->kdata[idx] >> 11) & 0x7FF;
+		tmp = (idx_value >> 11) & 0x7FF;
 		track->textures[i].height = tmp + 1;
-		tmp = (ib_chunk->kdata[idx] >> 26) & 0xF;
+		tmp = (idx_value >> 26) & 0xF;
 		track->textures[i].num_levels = tmp;
-		tmp = ib_chunk->kdata[idx] & (1 << 31);
+		tmp = idx_value & (1 << 31);
 		track->textures[i].use_pitch = !!tmp;
-		tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
+		tmp = (idx_value >> 22) & 0xF;
 		track->textures[i].txdepth = tmp;
 		break;
 	case R300_ZB_ZPASS_ADDR:
@@ -1067,7 +1068,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case 0x4be8:
 		/* valid register only on RV530 */
@@ -1085,60 +1086,20 @@
 static int r300_packet3_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
-
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
 	unsigned idx;
-	unsigned i, c;
 	int r;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
 	track = (struct r100_cs_track *)p->track;
 	switch(pkt->opcode) {
 	case PACKET3_3D_LOAD_VBPNTR:
-		c = ib_chunk->kdata[idx++] & 0x1F;
-		track->num_arrays = c;
-		for (i = 0; i < (c - 1); i+=2, idx+=3) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 1].robj = reloc->robj;
-			track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
-			track->arrays[i + 1].esize &= 0x7F;
-		}
-		if (c & 1) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-		}
+		r = r100_packet3_load_vbpntr(p, pkt, idx);
+		if (r)
+			return r;
 		break;
 	case PACKET3_INDX_BUFFER:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1147,7 +1108,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
 		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
 		if (r) {
 			return r;
@@ -1158,11 +1119,11 @@
 		/* Number of dwords is vtx_size * (num_vertices - 1)
 		 * PRIM_WALK must be equal to 3 vertex data in embedded
 		 * in cmd stream */
-		if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
@@ -1173,11 +1134,11 @@
 		/* Number of dwords is vtx_size * (num_vertices - 1)
 		 * PRIM_WALK must be equal to 3 vertex data in embedded
 		 * in cmd stream */
-		if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		track->immd_dwords = pkt->count;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
@@ -1185,28 +1146,28 @@
 		}
 		break;
 	case PACKET3_3D_DRAW_VBUF:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_VBUF_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_INDX:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_INDX_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index e1d5e03..868add6 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -445,6 +445,8 @@
 #define AVIVO_D1MODE_VBLANK_STATUS              0x6534
 #       define AVIVO_VBLANK_ACK                 (1 << 4)
 #define AVIVO_D1MODE_VLINE_START_END            0x6538
+#define AVIVO_D1MODE_VLINE_STATUS               0x653c
+#       define AVIVO_D1MODE_VLINE_STAT          (1 << 12)
 #define AVIVO_DxMODE_INT_MASK                   0x6540
 #       define AVIVO_D1MODE_INT_MASK            (1 << 0)
 #       define AVIVO_D2MODE_INT_MASK            (1 << 8)
@@ -502,6 +504,7 @@
 
 #define AVIVO_D2MODE_VBLANK_STATUS              0x6d34
 #define AVIVO_D2MODE_VLINE_START_END            0x6d38
+#define AVIVO_D2MODE_VLINE_STATUS               0x6d3c
 #define AVIVO_D2MODE_VIEWPORT_START             0x6d80
 #define AVIVO_D2MODE_VIEWPORT_SIZE              0x6d84
 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6d88
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index d4b0b9d..0bf13fc 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -26,108 +26,13 @@
  *          Jerome Glisse
  */
 #include "drmP.h"
-#include "radeon_reg.h"
 #include "radeon.h"
+#include "atom.h"
+#include "r520d.h"
 
-/* r520,rv530,rv560,rv570,r580 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
-int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
+/* This files gather functions specifics to: r520,rv530,rv560,rv570,r580 */
 
-/* This files gather functions specifics to:
- * r520,rv530,rv560,rv570,r580
- *
- * Some of these functions might be used by newer ASICs.
- */
-void r520_gpu_init(struct radeon_device *rdev);
-int r520_mc_wait_for_idle(struct radeon_device *rdev);
-
-
-/*
- * MC
- */
-int r520_mc_init(struct radeon_device *rdev)
-{
-	uint32_t tmp;
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-	if (rv515_debugfs_pipes_info_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for pipes !\n");
-	}
-	if (rv515_debugfs_ga_info_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for pipes !\n");
-	}
-
-	r520_gpu_init(rdev);
-	rv370_pcie_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	rs600_mc_disable_clients(rdev);
-	if (r520_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(R520_MC_FB_LOCATION, tmp);
-	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	WREG32(0x310, rdev->mc.vram_location);
-	if (rdev->flags & RADEON_IS_AGP) {
-		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(R520_MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(R520_MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(R520_MC_AGP_LOCATION, tmp);
-		WREG32_MC(R520_MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(R520_MC_AGP_BASE_2, 0);
-	} else {
-		WREG32_MC(R520_MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(R520_MC_AGP_BASE, 0);
-		WREG32_MC(R520_MC_AGP_BASE_2, 0);
-	}
-	return 0;
-}
-
-void r520_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-void r520_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
-int r520_mc_wait_for_idle(struct radeon_device *rdev)
+static int r520_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
 	uint32_t tmp;
@@ -143,12 +48,12 @@
 	return -1;
 }
 
-void r520_gpu_init(struct radeon_device *rdev)
+static void r520_gpu_init(struct radeon_device *rdev)
 {
 	unsigned pipe_select_current, gb_pipe_select, tmp;
 
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 	/*
 	 * DST_PIPE_CONFIG		0x170C
 	 * GB_TILE_CONFIG		0x4018
@@ -186,10 +91,6 @@
 	}
 }
 
-
-/*
- * VRAM info
- */
 static void r520_vram_get_type(struct radeon_device *rdev)
 {
 	uint32_t tmp;
@@ -233,7 +134,168 @@
 	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
-void r520_bandwidth_update(struct radeon_device *rdev)
+void r520_mc_program(struct radeon_device *rdev)
 {
-	rv515_bandwidth_avivo_update(rdev);
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (r520_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	/* Write VRAM size in case we are limiting it */
+	WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Program MC, should be a 32bits limited address space */
+	WREG32_MC(R_000004_MC_FB_LOCATION,
+			S_000004_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000004_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+	if (rdev->flags & RADEON_IS_AGP) {
+		WREG32_MC(R_000005_MC_AGP_LOCATION,
+			S_000005_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+			S_000005_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+		WREG32_MC(R_000006_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+		WREG32_MC(R_000007_AGP_BASE_2,
+			S_000007_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+	} else {
+		WREG32_MC(R_000005_MC_AGP_LOCATION, 0xFFFFFFFF);
+		WREG32_MC(R_000006_AGP_BASE, 0);
+		WREG32_MC(R_000007_AGP_BASE_2, 0);
+	}
+
+	rv515_mc_resume(rdev, &save);
+}
+
+static int r520_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	r520_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	r520_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	r100_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int r520_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return r520_startup(rdev);
+}
+
+int r520_init(struct radeon_device *rdev)
+{
+	int r;
+
+	rdev->new_init_path = true;
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	r520_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rv515_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rv370_pcie_gart_init(rdev);
+	if (r)
+		return r;
+	rv515_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = r520_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rv515_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rv370_pcie_gart_fini(rdev);
+		radeon_agp_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
+	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/r520d.h b/drivers/gpu/drm/radeon/r520d.h
new file mode 100644
index 0000000..61af61f
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r520d.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __R520D_H__
+#define __R520D_H__
+
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE                      0x0000F8
+#define   S_0000F8_CONFIG_MEMSIZE(x)                   (((x) & 0xFFFFFFFF) << 0)
+#define   G_0000F8_CONFIG_MEMSIZE(x)                   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0000F8_CONFIG_MEMSIZE                      0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_RBBM_HIBUSY(x)                      (((x) & 0x1) << 28)
+#define   G_000E40_RBBM_HIBUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_000E40_RBBM_HIBUSY                         0xEFFFFFFF
+#define   S_000E40_SKID_CFBUSY(x)                      (((x) & 0x1) << 29)
+#define   G_000E40_SKID_CFBUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_000E40_SKID_CFBUSY                         0xDFFFFFFF
+#define   S_000E40_VAP_VF_BUSY(x)                      (((x) & 0x1) << 30)
+#define   G_000E40_VAP_VF_BUSY(x)                      (((x) >> 30) & 0x1)
+#define   C_000E40_VAP_VF_BUSY                         0xBFFFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+
+
+#define R_000004_MC_FB_LOCATION                      0x000004
+#define   S_000004_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000004_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000004_MC_FB_START                         0xFFFF0000
+#define   S_000004_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000004_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000004_MC_FB_TOP                           0x0000FFFF
+#define R_000005_MC_AGP_LOCATION                     0x000005
+#define   S_000005_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000005_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000005_MC_AGP_START                        0xFFFF0000
+#define   S_000005_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_000005_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_000005_MC_AGP_TOP                          0x0000FFFF
+#define R_000006_AGP_BASE                            0x000006
+#define   S_000006_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000006_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000006_AGP_BASE_ADDR                       0x00000000
+#define R_000007_AGP_BASE_2                          0x000007
+#define   S_000007_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_000007_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_000007_AGP_BASE_ADDR_2                     0xFFFFFFF0
+
+#endif
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index eab31c1..2e4e60e 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -33,8 +33,8 @@
 #include "radeon.h"
 #include "radeon_mode.h"
 #include "r600d.h"
-#include "avivod.h"
 #include "atom.h"
+#include "avivod.h"
 
 #define PFP_UCODE_SIZE 576
 #define PM4_UCODE_SIZE 1792
@@ -342,7 +342,7 @@
 
 	/* we need to own VRAM, so turn off the VGA renderer here
 	 * to stop it overwriting our objects */
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 }
 
 int r600_mc_init(struct radeon_device *rdev)
@@ -380,6 +380,13 @@
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r)
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 33b89cd..d28970d 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -28,7 +28,6 @@
 #include "drmP.h"
 #include "radeon.h"
 #include "r600d.h"
-#include "avivod.h"
 
 static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc);
@@ -57,7 +56,7 @@
 			  idx, ib_chunk->length_dw);
 		return -EINVAL;
 	}
-	header = ib_chunk->kdata[idx];
+	header = radeon_get_ib_value(p, idx);
 	pkt->idx = idx;
 	pkt->type = CP_PACKET_GET_TYPE(header);
 	pkt->count = CP_PACKET_GET_COUNT(header);
@@ -98,7 +97,6 @@
 static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -109,7 +107,6 @@
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r600_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -121,7 +118,7 @@
 			  p3reloc.idx);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -146,7 +143,6 @@
 static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -157,7 +153,6 @@
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r600_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -169,7 +164,7 @@
 			  p3reloc.idx);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -181,13 +176,136 @@
 	return 0;
 }
 
+/**
+ * r600_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser:		parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET3 - WAIT_REG_MEM poll vline status reg
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT_REG_MEM packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	struct radeon_crtc *radeon_crtc;
+	struct radeon_cs_packet p3reloc, wait_reg_mem;
+	int crtc_id;
+	int r;
+	uint32_t header, h_idx, reg, wait_reg_mem_info;
+	volatile uint32_t *ib;
+
+	ib = p->ib->ptr;
+
+	/* parse the WAIT_REG_MEM */
+	r = r600_cs_packet_parse(p, &wait_reg_mem, p->idx);
+	if (r)
+		return r;
+
+	/* check its a WAIT_REG_MEM */
+	if (wait_reg_mem.type != PACKET_TYPE3 ||
+	    wait_reg_mem.opcode != PACKET3_WAIT_REG_MEM) {
+		DRM_ERROR("vline wait missing WAIT_REG_MEM segment\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	wait_reg_mem_info = radeon_get_ib_value(p, wait_reg_mem.idx + 1);
+	/* bit 4 is reg (0) or mem (1) */
+	if (wait_reg_mem_info & 0x10) {
+		DRM_ERROR("vline WAIT_REG_MEM waiting on MEM rather than REG\n");
+		r = -EINVAL;
+		return r;
+	}
+	/* waiting for value to be equal */
+	if ((wait_reg_mem_info & 0x7) != 0x3) {
+		DRM_ERROR("vline WAIT_REG_MEM function not equal\n");
+		r = -EINVAL;
+		return r;
+	}
+	if ((radeon_get_ib_value(p, wait_reg_mem.idx + 2) << 2) != AVIVO_D1MODE_VLINE_STATUS) {
+		DRM_ERROR("vline WAIT_REG_MEM bad reg\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	if (radeon_get_ib_value(p, wait_reg_mem.idx + 5) != AVIVO_D1MODE_VLINE_STAT) {
+		DRM_ERROR("vline WAIT_REG_MEM bad bit mask\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	/* jump over the NOP */
+	r = r600_cs_packet_parse(p, &p3reloc, p->idx + wait_reg_mem.count + 2);
+	if (r)
+		return r;
+
+	h_idx = p->idx - 2;
+	p->idx += wait_reg_mem.count + 2;
+	p->idx += p3reloc.count + 2;
+
+	header = radeon_get_ib_value(p, h_idx);
+	crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
+	reg = header >> 2;
+	mutex_lock(&p->rdev->ddev->mode_config.mutex);
+	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_ERROR("cannot find crtc %d\n", crtc_id);
+		r = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+	radeon_crtc = to_radeon_crtc(crtc);
+	crtc_id = radeon_crtc->crtc_id;
+
+	if (!crtc->enabled) {
+		/* if the CRTC isn't enabled - we need to nop out the WAIT_REG_MEM */
+		ib[h_idx + 2] = PACKET2(0);
+		ib[h_idx + 3] = PACKET2(0);
+		ib[h_idx + 4] = PACKET2(0);
+		ib[h_idx + 5] = PACKET2(0);
+		ib[h_idx + 6] = PACKET2(0);
+		ib[h_idx + 7] = PACKET2(0);
+		ib[h_idx + 8] = PACKET2(0);
+	} else if (crtc_id == 1) {
+		switch (reg) {
+		case AVIVO_D1MODE_VLINE_START_END:
+			header &= ~R600_CP_PACKET0_REG_MASK;
+			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+			break;
+		default:
+			DRM_ERROR("unknown crtc reloc\n");
+			r = -EINVAL;
+			goto out;
+		}
+		ib[h_idx] = header;
+		ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
+	}
+out:
+	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+	return r;
+}
+
 static int r600_packet0_check(struct radeon_cs_parser *p,
 				struct radeon_cs_packet *pkt,
 				unsigned idx, unsigned reg)
 {
+	int r;
+
 	switch (reg) {
 	case AVIVO_D1MODE_VLINE_START_END:
-	case AVIVO_D2MODE_VLINE_START_END:
+		r = r600_cs_packet_parse_vline(p);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			return r;
+		}
 		break;
 	default:
 		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
@@ -218,17 +336,18 @@
 static int r600_packet3_check(struct radeon_cs_parser *p,
 				struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	volatile u32 *ib;
 	unsigned idx;
 	unsigned i;
 	unsigned start_reg, end_reg, reg;
 	int r;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch (pkt->opcode) {
 	case PACKET3_START_3D_CMDBUF:
 		if (p->family >= CHIP_RV770 || pkt->count) {
@@ -259,8 +378,8 @@
 			DRM_ERROR("bad DRAW_INDEX\n");
 			return -EINVAL;
 		}
-		ib[idx+0] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-		ib[idx+1] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		break;
 	case PACKET3_DRAW_INDEX_AUTO:
 		if (pkt->count != 1) {
@@ -281,14 +400,14 @@
 			return -EINVAL;
 		}
 		/* bit 4 is reg (0) or mem (1) */
-		if (ib_chunk->kdata[idx+0] & 0x10) {
+		if (idx_value & 0x10) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("bad WAIT_REG_MEM\n");
 				return -EINVAL;
 			}
 			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-			ib[idx+2] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		}
 		break;
 	case PACKET3_SURFACE_SYNC:
@@ -297,8 +416,8 @@
 			return -EINVAL;
 		}
 		/* 0xffffffff/0x0 is flush all cache flag */
-		if (ib_chunk->kdata[idx+1] != 0xffffffff ||
-		    ib_chunk->kdata[idx+2] != 0) {
+		if (radeon_get_ib_value(p, idx + 1) != 0xffffffff ||
+		    radeon_get_ib_value(p, idx + 2) != 0) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("bad SURFACE_SYNC\n");
@@ -319,7 +438,7 @@
 				return -EINVAL;
 			}
 			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-			ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		}
 		break;
 	case PACKET3_EVENT_WRITE_EOP:
@@ -333,10 +452,10 @@
 			return -EINVAL;
 		}
 		ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-		ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		break;
 	case PACKET3_SET_CONFIG_REG:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CONFIG_REG_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CONFIG_REG_END) ||
@@ -356,7 +475,7 @@
 		}
 		break;
 	case PACKET3_SET_CONTEXT_REG:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CONTEXT_REG_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CONTEXT_REG_END) ||
@@ -421,7 +540,7 @@
 			DRM_ERROR("bad SET_RESOURCE\n");
 			return -EINVAL;
 		}
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_RESOURCE_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_RESOURCE_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_RESOURCE_OFFSET) ||
 		    (start_reg >= PACKET3_SET_RESOURCE_END) ||
@@ -430,7 +549,7 @@
 			return -EINVAL;
 		}
 		for (i = 0; i < (pkt->count / 7); i++) {
-			switch (G__SQ_VTX_CONSTANT_TYPE(ib[idx+(i*7)+6+1])) {
+			switch (G__SQ_VTX_CONSTANT_TYPE(radeon_get_ib_value(p, idx+(i*7)+6+1))) {
 			case SQ_TEX_VTX_VALID_TEXTURE:
 				/* tex base */
 				r = r600_cs_packet_next_reloc(p, &reloc);
@@ -455,7 +574,7 @@
 					return -EINVAL;
 				}
 				ib[idx+1+(i*7)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff);
-				ib[idx+1+(i*7)+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+				ib[idx+1+(i*7)+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 				break;
 			case SQ_TEX_VTX_INVALID_TEXTURE:
 			case SQ_TEX_VTX_INVALID_BUFFER:
@@ -466,7 +585,7 @@
 		}
 		break;
 	case PACKET3_SET_ALU_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_ALU_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_ALU_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_ALU_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_ALU_CONST_END) ||
@@ -476,7 +595,7 @@
 		}
 		break;
 	case PACKET3_SET_BOOL_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_BOOL_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_BOOL_CONST_END) ||
@@ -486,7 +605,7 @@
 		}
 		break;
 	case PACKET3_SET_LOOP_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_LOOP_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_LOOP_CONST_END) ||
@@ -496,7 +615,7 @@
 		}
 		break;
 	case PACKET3_SET_CTL_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CTL_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CTL_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CTL_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CTL_CONST_END) ||
@@ -510,7 +629,7 @@
 			DRM_ERROR("bad SET_SAMPLER\n");
 			return -EINVAL;
 		}
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_SAMPLER_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_SAMPLER_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_SAMPLER_OFFSET) ||
 		    (start_reg >= PACKET3_SET_SAMPLER_END) ||
@@ -602,6 +721,8 @@
 	kfree(parser->relocs);
 	for (i = 0; i < parser->nchunks; i++) {
 		kfree(parser->chunks[i].kdata);
+		kfree(parser->chunks[i].kpage[0]);
+		kfree(parser->chunks[i].kpage[1]);
 	}
 	kfree(parser->chunks);
 	kfree(parser->chunks_array);
@@ -639,7 +760,6 @@
 	 * uncached). */
 	ib_chunk = &parser.chunks[parser.chunk_ib_idx];
 	parser.ib->length_dw = ib_chunk->length_dw;
-	memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
 	*l = parser.ib->length_dw;
 	r = r600_cs_parse(&parser);
 	if (r) {
@@ -647,6 +767,12 @@
 		r600_cs_parser_fini(&parser, r);
 		return r;
 	}
+	r = radeon_cs_finish_pages(&parser);
+	if (r) {
+		DRM_ERROR("Invalid command stream !\n");
+		r600_cs_parser_fini(&parser, r);
+		return r;
+	}
 	r600_cs_parser_fini(&parser, r);
 	return r;
 }
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 6311b13..950b346 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -44,6 +44,24 @@
  *	- TESTING, TESTING, TESTING
  */
 
+/* Initialization path:
+ *  We expect that acceleration initialization might fail for various
+ *  reasons even thought we work hard to make it works on most
+ *  configurations. In order to still have a working userspace in such
+ *  situation the init path must succeed up to the memory controller
+ *  initialization point. Failure before this point are considered as
+ *  fatal error. Here is the init callchain :
+ *      radeon_device_init  perform common structure, mutex initialization
+ *      asic_init           setup the GPU memory layout and perform all
+ *                          one time initialization (failure in this
+ *                          function are considered fatal)
+ *      asic_startup        setup the GPU acceleration, in order to
+ *                          follow guideline the first thing this
+ *                          function should do is setting the GPU
+ *                          memory controller (only MC setup failure
+ *                          are considered as fatal)
+ */
+
 #include <asm/atomic.h>
 #include <linux/wait.h>
 #include <linux/list.h>
@@ -342,7 +360,7 @@
 	unsigned long		idx;
 	uint64_t		gpu_addr;
 	struct radeon_fence	*fence;
-	volatile uint32_t	*ptr;
+	uint32_t	*ptr;
 	uint32_t		length_dw;
 };
 
@@ -415,7 +433,12 @@
 struct radeon_cs_chunk {
 	uint32_t		chunk_id;
 	uint32_t		length_dw;
+	int kpage_idx[2];
+	uint32_t                *kpage[2];
 	uint32_t		*kdata;
+	void __user *user_ptr;
+	int last_copied_page;
+	int last_page_index;
 };
 
 struct radeon_cs_parser {
@@ -438,8 +461,38 @@
 	struct radeon_ib	*ib;
 	void			*track;
 	unsigned		family;
+	int parser_error;
 };
 
+extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx);
+extern int radeon_cs_finish_pages(struct radeon_cs_parser *p);
+
+
+static inline u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx)
+{
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	u32 pg_idx, pg_offset;
+	u32 idx_value = 0;
+	int new_page;
+
+	pg_idx = (idx * 4) / PAGE_SIZE;
+	pg_offset = (idx * 4) % PAGE_SIZE;
+
+	if (ibc->kpage_idx[0] == pg_idx)
+		return ibc->kpage[0][pg_offset/4];
+	if (ibc->kpage_idx[1] == pg_idx)
+		return ibc->kpage[1][pg_offset/4];
+
+	new_page = radeon_cs_update_pages(p, pg_idx);
+	if (new_page < 0) {
+		p->parser_error = new_page;
+		return 0;
+	}
+
+	idx_value = ibc->kpage[new_page][pg_offset/4];
+	return idx_value;
+}
+
 struct radeon_cs_packet {
 	unsigned	idx;
 	unsigned	type;
@@ -943,6 +996,7 @@
 extern void radeon_scratch_init(struct radeon_device *rdev);
 extern void radeon_surface_init(struct radeon_device *rdev);
 extern int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data);
+extern void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
 
 /* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280 */
 struct r100_mc_save {
@@ -974,6 +1028,9 @@
 extern void r100_wb_disable(struct radeon_device *rdev);
 extern void r100_wb_fini(struct radeon_device *rdev);
 extern int r100_wb_init(struct radeon_device *rdev);
+extern void r100_hdp_reset(struct radeon_device *rdev);
+extern int r100_rb2d_reset(struct radeon_device *rdev);
+extern int r100_cp_reset(struct radeon_device *rdev);
 
 /* r300,r350,rv350,rv370,rv380 */
 extern void r300_set_reg_safe(struct radeon_device *rdev);
@@ -985,12 +1042,29 @@
 extern void rv370_pcie_gart_disable(struct radeon_device *rdev);
 
 /* r420,r423,rv410 */
+extern int r420_mc_init(struct radeon_device *rdev);
 extern u32 r420_mc_rreg(struct radeon_device *rdev, u32 reg);
 extern void r420_mc_wreg(struct radeon_device *rdev, u32 reg, u32 v);
 extern int r420_debugfs_pipes_info_init(struct radeon_device *rdev);
+extern void r420_pipes_init(struct radeon_device *rdev);
 
 /* rv515 */
+struct rv515_mc_save {
+	u32 d1vga_control;
+	u32 d2vga_control;
+	u32 vga_render_control;
+	u32 vga_hdp_control;
+	u32 d1crtc_control;
+	u32 d2crtc_control;
+};
 extern void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+extern void rv515_vga_render_disable(struct radeon_device *rdev);
+extern void rv515_set_safe_registers(struct radeon_device *rdev);
+extern void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_clock_startup(struct radeon_device *rdev);
+extern void rv515_debugfs(struct radeon_device *rdev);
+extern int rv515_suspend(struct radeon_device *rdev);
 
 /* rs690, rs740 */
 extern void rs690_line_buffer_adjust(struct radeon_device *rdev,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 8968f78..c8a4e7b 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -420,41 +420,43 @@
  * rv515
  */
 int rv515_init(struct radeon_device *rdev);
-void rv515_errata(struct radeon_device *rdev);
-void rv515_vram_info(struct radeon_device *rdev);
+void rv515_fini(struct radeon_device *rdev);
 int rv515_gpu_reset(struct radeon_device *rdev);
-int rv515_mc_init(struct radeon_device *rdev);
-void rv515_mc_fini(struct radeon_device *rdev);
 uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_ring_start(struct radeon_device *rdev);
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_bandwidth_update(struct radeon_device *rdev);
+int rv515_resume(struct radeon_device *rdev);
+int rv515_suspend(struct radeon_device *rdev);
 static struct radeon_asic rv515_asic = {
 	.init = &rv515_init,
-	.errata = &rv515_errata,
-	.vram_info = &rv515_vram_info,
+	.fini = &rv515_fini,
+	.suspend = &rv515_suspend,
+	.resume = &rv515_resume,
+	.errata = NULL,
+	.vram_info = NULL,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &rv515_gpu_reset,
-	.mc_init = &rv515_mc_init,
-	.mc_fini = &rv515_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
+	.mc_init = NULL,
+	.mc_fini = NULL,
+	.wb_init = NULL,
+	.wb_fini = NULL,
 	.gart_init = &rv370_pcie_gart_init,
 	.gart_fini = &rv370_pcie_gart_fini,
-	.gart_enable = &rv370_pcie_gart_enable,
-	.gart_disable = &rv370_pcie_gart_disable,
+	.gart_enable = NULL,
+	.gart_disable = NULL,
 	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
 	.gart_set_page = &rv370_pcie_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
+	.cp_init = NULL,
+	.cp_fini = NULL,
+	.cp_disable = NULL,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &rv515_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
+	.ib_test = NULL,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -476,35 +478,35 @@
 /*
  * r520,rv530,rv560,rv570,r580
  */
-void r520_errata(struct radeon_device *rdev);
-void r520_vram_info(struct radeon_device *rdev);
-int r520_mc_init(struct radeon_device *rdev);
-void r520_mc_fini(struct radeon_device *rdev);
-void r520_bandwidth_update(struct radeon_device *rdev);
+int r520_init(struct radeon_device *rdev);
+int r520_resume(struct radeon_device *rdev);
 static struct radeon_asic r520_asic = {
-	.init = &rv515_init,
-	.errata = &r520_errata,
-	.vram_info = &r520_vram_info,
+	.init = &r520_init,
+	.fini = &rv515_fini,
+	.suspend = &rv515_suspend,
+	.resume = &r520_resume,
+	.errata = NULL,
+	.vram_info = NULL,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &rv515_gpu_reset,
-	.mc_init = &r520_mc_init,
-	.mc_fini = &r520_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &rv370_pcie_gart_init,
-	.gart_fini = &rv370_pcie_gart_fini,
-	.gart_enable = &rv370_pcie_gart_enable,
-	.gart_disable = &rv370_pcie_gart_disable,
+	.mc_init = NULL,
+	.mc_fini = NULL,
+	.wb_init = NULL,
+	.wb_fini = NULL,
+	.gart_init = NULL,
+	.gart_fini = NULL,
+	.gart_enable = NULL,
+	.gart_disable = NULL,
 	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
 	.gart_set_page = &rv370_pcie_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
+	.cp_init = NULL,
+	.cp_fini = NULL,
+	.cp_disable = NULL,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &rv515_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
+	.ib_test = NULL,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -519,7 +521,7 @@
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r100_set_surface_reg,
 	.clear_surface_reg = r100_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 /*
@@ -596,7 +598,7 @@
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r600_set_surface_reg,
 	.clear_surface_reg = r600_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 /*
@@ -646,7 +648,7 @@
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r600_set_surface_reg,
 	.clear_surface_reg = r600_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 7437421..5b6c08c 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -272,12 +272,9 @@
 			    (le16_to_cpu(path->usConnObjectId) &
 			     OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
 
-			if ((le16_to_cpu(path->usDeviceTag) ==
-			     ATOM_DEVICE_TV1_SUPPORT)
-			    || (le16_to_cpu(path->usDeviceTag) ==
-				ATOM_DEVICE_TV2_SUPPORT)
-			    || (le16_to_cpu(path->usDeviceTag) ==
-				ATOM_DEVICE_CV_SUPPORT))
+			/* TODO CV support */
+			if (le16_to_cpu(path->usDeviceTag) ==
+				ATOM_DEVICE_CV_SUPPORT)
 				continue;
 
 			if ((rdev->family == CHIP_RS780) &&
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index af1d551..e376be4 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -26,6 +26,7 @@
 #include "drmP.h"
 #include "drm_edid.h"
 #include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
 #include "radeon_drm.h"
 #include "radeon.h"
 #include "atom.h"
@@ -245,7 +246,7 @@
 		if (common_modes[i].w < 320 || common_modes[i].h < 200)
 			continue;
 
-		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false);
+		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false, false);
 		drm_mode_probed_add(connector, mode);
 	}
 }
@@ -559,7 +560,7 @@
 		radeon_add_common_modes(encoder, connector);
 	else {
 		/* only 800x600 is supported right now on pre-avivo chips */
-		tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false);
+		tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false, false);
 		tv_mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
 		drm_mode_probed_add(connector, tv_mode);
 	}
@@ -743,6 +744,15 @@
 	return NULL;
 }
 
+static void radeon_dvi_force(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	if (connector->force == DRM_FORCE_ON)
+		radeon_connector->use_digital = false;
+	if (connector->force == DRM_FORCE_ON_DIGITAL)
+		radeon_connector->use_digital = true;
+}
+
 struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = {
 	.get_modes = radeon_dvi_get_modes,
 	.mode_valid = radeon_vga_mode_valid,
@@ -755,6 +765,7 @@
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = radeon_connector_set_property,
 	.destroy = radeon_connector_destroy,
+	.force = radeon_dvi_force,
 };
 
 void
@@ -771,6 +782,7 @@
 	struct radeon_connector *radeon_connector;
 	struct radeon_connector_atom_dig *radeon_dig_connector;
 	uint32_t subpixel_order = SubPixelNone;
+	int ret;
 
 	/* fixme - tv/cv/din */
 	if (connector_type == DRM_MODE_CONNECTOR_Unknown)
@@ -796,24 +808,30 @@
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -827,7 +845,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
@@ -837,6 +857,7 @@
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.coherent_mode_property,
 					      1);
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -850,7 +871,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "HDMI");
 			if (!radeon_connector->ddc_bus)
@@ -869,7 +892,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
 			if (!radeon_connector->ddc_bus)
@@ -882,11 +907,14 @@
 	case DRM_MODE_CONNECTOR_9PinDIN:
 		if (radeon_tv == 1) {
 			drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
-			drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			if (ret)
+				goto failed;
+			radeon_connector->dac_load_detect = true;
+			drm_connector_attach_property(&radeon_connector->base,
+						      rdev->mode_info.load_detect_property,
+						      1);
 		}
-		drm_connector_attach_property(&radeon_connector->base,
-					      rdev->mode_info.load_detect_property,
-					      1);
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
@@ -896,7 +924,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
 			if (!radeon_connector->ddc_bus)
@@ -932,6 +962,7 @@
 	struct drm_connector *connector;
 	struct radeon_connector *radeon_connector;
 	uint32_t subpixel_order = SubPixelNone;
+	int ret;
 
 	/* fixme - tv/cv/din */
 	if (connector_type == DRM_MODE_CONNECTOR_Unknown)
@@ -957,24 +988,30 @@
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -982,11 +1019,14 @@
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_DVID:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
+			radeon_connector->dac_load_detect = true;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
 						      1);
@@ -998,7 +1038,10 @@
 	case DRM_MODE_CONNECTOR_9PinDIN:
 		if (radeon_tv == 1) {
 			drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
-			drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			if (ret)
+				goto failed;
+			radeon_connector->dac_load_detect = true;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
 						      1);
@@ -1006,7 +1049,9 @@
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
 			if (!radeon_connector->ddc_bus)
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 12f5990..5ab2cf9 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -142,15 +142,31 @@
 		}
 
 		p->chunks[i].length_dw = user_chunk.length_dw;
-		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+		p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data;
 
-		size = p->chunks[i].length_dw * sizeof(uint32_t);
-		p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
-		if (p->chunks[i].kdata == NULL) {
-			return -ENOMEM;
-		}
-		if (DRM_COPY_FROM_USER(p->chunks[i].kdata, cdata, size)) {
-			return -EFAULT;
+		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+		if (p->chunks[i].chunk_id != RADEON_CHUNK_ID_IB) {
+			size = p->chunks[i].length_dw * sizeof(uint32_t);
+			p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
+			if (p->chunks[i].kdata == NULL) {
+				return -ENOMEM;
+			}
+			if (DRM_COPY_FROM_USER(p->chunks[i].kdata,
+					       p->chunks[i].user_ptr, size)) {
+				return -EFAULT;
+			}
+		} else {
+			p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+			p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+			if (p->chunks[i].kpage[0] == NULL || p->chunks[i].kpage[1] == NULL) {
+				kfree(p->chunks[i].kpage[0]);
+				kfree(p->chunks[i].kpage[1]);
+				return -ENOMEM;
+			}
+			p->chunks[i].kpage_idx[0] = -1;
+			p->chunks[i].kpage_idx[1] = -1;
+			p->chunks[i].last_copied_page = -1;
+			p->chunks[i].last_page_index = ((p->chunks[i].length_dw * 4) - 1) / PAGE_SIZE;
 		}
 	}
 	if (p->chunks[p->chunk_ib_idx].length_dw > (16 * 1024)) {
@@ -190,6 +206,8 @@
 	kfree(parser->relocs_ptr);
 	for (i = 0; i < parser->nchunks; i++) {
 		kfree(parser->chunks[i].kdata);
+		kfree(parser->chunks[i].kpage[0]);
+		kfree(parser->chunks[i].kpage[1]);
 	}
 	kfree(parser->chunks);
 	kfree(parser->chunks_array);
@@ -238,8 +256,14 @@
 	 * uncached). */
 	ib_chunk = &parser.chunks[parser.chunk_ib_idx];
 	parser.ib->length_dw = ib_chunk->length_dw;
-	memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
 	r = radeon_cs_parse(&parser);
+	if (r || parser.parser_error) {
+		DRM_ERROR("Invalid command stream !\n");
+		radeon_cs_parser_fini(&parser, r);
+		mutex_unlock(&rdev->cs_mutex);
+		return r;
+	}
+	r = radeon_cs_finish_pages(&parser);
 	if (r) {
 		DRM_ERROR("Invalid command stream !\n");
 		radeon_cs_parser_fini(&parser, r);
@@ -254,3 +278,64 @@
 	mutex_unlock(&rdev->cs_mutex);
 	return r;
 }
+
+int radeon_cs_finish_pages(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	int i;
+	int size = PAGE_SIZE;
+
+	for (i = ibc->last_copied_page + 1; i <= ibc->last_page_index; i++) {
+		if (i == ibc->last_page_index) {
+			size = (ibc->length_dw * 4) % PAGE_SIZE;
+			if (size == 0)
+				size = PAGE_SIZE;
+		}
+		
+		if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+				       ibc->user_ptr + (i * PAGE_SIZE),
+				       size))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx)
+{
+	int new_page;
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	int i;
+	int size = PAGE_SIZE;
+
+	for (i = ibc->last_copied_page + 1; i < pg_idx; i++) {
+		if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+				       ibc->user_ptr + (i * PAGE_SIZE),
+				       PAGE_SIZE)) {
+			p->parser_error = -EFAULT;
+			return 0;
+		}
+	}
+
+	new_page = ibc->kpage_idx[0] < ibc->kpage_idx[1] ? 0 : 1;
+
+	if (pg_idx == ibc->last_page_index) {
+		size = (ibc->length_dw * 4) % PAGE_SIZE;
+			if (size == 0)
+				size = PAGE_SIZE;
+	}
+
+	if (DRM_COPY_FROM_USER(ibc->kpage[new_page],
+			       ibc->user_ptr + (pg_idx * PAGE_SIZE),
+			       size)) {
+		p->parser_error = -EFAULT;
+		return 0;
+	}
+
+	/* copy to IB here */
+	memcpy((void *)(p->ib->ptr+(pg_idx*(PAGE_SIZE/4))), ibc->kpage[new_page], size);
+
+	ibc->last_copied_page = pg_idx;
+	ibc->kpage_idx[new_page] = pg_idx;
+
+	return new_page;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index daf5db7..ec835d5 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -532,10 +532,13 @@
 
 	if (radeon_agpmode == -1) {
 		rdev->flags &= ~RADEON_IS_AGP;
-		if (rdev->family >= CHIP_RV515 ||
-		    rdev->family == CHIP_RV380 ||
-		    rdev->family == CHIP_RV410 ||
-		    rdev->family == CHIP_R423) {
+		if (rdev->family >= CHIP_R600) {
+			DRM_INFO("Forcing AGP to PCIE mode\n");
+			rdev->flags |= RADEON_IS_PCIE;
+		} else if (rdev->family >= CHIP_RV515 ||
+			   rdev->family == CHIP_RV380 ||
+			   rdev->family == CHIP_RV410 ||
+			   rdev->family == CHIP_R423) {
 			DRM_INFO("Forcing AGP to PCIE mode\n");
 			rdev->flags |= RADEON_IS_PCIE;
 			rdev->asic->gart_init = &rv370_pcie_gart_init;
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 50fce49..7f50fb8 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -62,9 +62,6 @@
 int radeon_driver_irq_postinstall_kms(struct drm_device *dev);
 void radeon_driver_irq_uninstall_kms(struct drm_device *dev);
 irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS);
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master);
-void radeon_master_destroy_kms(struct drm_device *dev,
-			       struct drm_master *master);
 int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 int radeon_gem_object_init(struct drm_gem_object *obj);
@@ -260,8 +257,6 @@
 	.get_vblank_counter = radeon_get_vblank_counter_kms,
 	.enable_vblank = radeon_enable_vblank_kms,
 	.disable_vblank = radeon_disable_vblank_kms,
-	.master_create = radeon_master_create_kms,
-	.master_destroy = radeon_master_destroy_kms,
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = radeon_debugfs_init,
 	.debugfs_cleanup = radeon_debugfs_cleanup,
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 944e4fa..1ba704e 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -128,6 +128,7 @@
 int radeonfb_create(struct drm_device *dev,
 		    uint32_t fb_width, uint32_t fb_height,
 		    uint32_t surface_width, uint32_t surface_height,
+		    uint32_t surface_depth, uint32_t surface_bpp,
 		    struct drm_framebuffer **fb_p)
 {
 	struct radeon_device *rdev = dev->dev_private;
@@ -148,10 +149,10 @@
 
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
-	mode_cmd.bpp = 32;
+	mode_cmd.bpp = surface_bpp;
 	/* need to align pitch with crtc limits */
 	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
-	mode_cmd.depth = 24;
+	mode_cmd.depth = surface_depth;
 
 	size = mode_cmd.pitch * mode_cmd.height;
 	aligned_size = ALIGN(size, PAGE_SIZE);
@@ -290,13 +291,26 @@
 	return ret;
 }
 
+static char *mode_option;
+int radeon_parse_options(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!*this_opt)
+			continue;
+		mode_option = this_opt;
+	}
+	return 0;
+}
+
 int radeonfb_probe(struct drm_device *dev)
 {
-	int ret;
-	ret = drm_fb_helper_single_fb_probe(dev, &radeonfb_create);
-	return ret;
+	return drm_fb_helper_single_fb_probe(dev, &radeonfb_create);
 }
-EXPORT_SYMBOL(radeonfb_probe);
 
 int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
 {
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 709bd89..ba12862 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -201,55 +201,6 @@
 
 
 /*
- * For multiple master (like multiple X).
- */
-struct drm_radeon_master_private {
-	drm_local_map_t *sarea;
-	drm_radeon_sarea_t *sarea_priv;
-};
-
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master)
-{
-	struct drm_radeon_master_private *master_priv;
-	unsigned long sareapage;
-	int ret;
-
-	master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
-	if (master_priv == NULL) {
-		return -ENOMEM;
-	}
-	/* prebuild the SAREA */
-	sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE);
-	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM,
-			 _DRM_CONTAINS_LOCK,
-			 &master_priv->sarea);
-	if (ret) {
-		DRM_ERROR("SAREA setup failed\n");
-		return ret;
-	}
-	master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea);
-	master_priv->sarea_priv->pfCurrentPage = 0;
-	master->driver_priv = master_priv;
-	return 0;
-}
-
-void radeon_master_destroy_kms(struct drm_device *dev,
-			       struct drm_master *master)
-{
-	struct drm_radeon_master_private *master_priv = master->driver_priv;
-
-	if (master_priv == NULL) {
-		return;
-	}
-	if (master_priv->sarea) {
-		drm_rmmap_locked(dev, master_priv->sarea);
-	}
-	kfree(master_priv);
-	master->driver_priv = NULL;
-}
-
-
-/*
  * IOCTL.
  */
 int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h
index 21da871..bfa1ab9 100644
--- a/drivers/gpu/drm/radeon/radeon_reg.h
+++ b/drivers/gpu/drm/radeon/radeon_reg.h
@@ -3333,6 +3333,7 @@
 #       define RADEON_CP_PACKET_MAX_DWORDS          (1 << 12)
 #       define RADEON_CP_PACKET0_REG_MASK           0x000007ff
 #       define R300_CP_PACKET0_REG_MASK             0x00001fff
+#       define R600_CP_PACKET0_REG_MASK             0x0000ffff
 #       define RADEON_CP_PACKET1_REG0_MASK          0x000007ff
 #       define RADEON_CP_PACKET1_REG1_MASK          0x003ff800
 
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index acd889c..765bd18 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -530,7 +530,7 @@
 }
 
 static struct vm_operations_struct radeon_ttm_vm_ops;
-static struct vm_operations_struct *ttm_vm_ops = NULL;
+static const struct vm_operations_struct *ttm_vm_ops = NULL;
 
 static int radeon_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
@@ -689,9 +689,6 @@
 
 #define RADEON_DEBUGFS_MEM_TYPES 2
 
-static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
-static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
-
 #if defined(CONFIG_DEBUG_FS)
 static int radeon_mm_dump_table(struct seq_file *m, void *data)
 {
@@ -711,9 +708,11 @@
 
 static int radeon_ttm_debugfs_init(struct radeon_device *rdev)
 {
+#if defined(CONFIG_DEBUG_FS)
+	static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
+	static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
 	unsigned i;
 
-#if defined(CONFIG_DEBUG_FS)
 	for (i = 0; i < RADEON_DEBUGFS_MEM_TYPES; i++) {
 		if (i == 0)
 			sprintf(radeon_mem_types_names[i], "radeon_vram_mm");
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 0e791e26..4a4fe1c 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -28,7 +28,6 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
-#include "avivod.h"
 
 #include "rs600_reg_safe.h"
 
@@ -45,7 +44,6 @@
  */
 void rs600_gpu_init(struct radeon_device *rdev);
 int rs600_mc_wait_for_idle(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
 
 
 /*
@@ -198,7 +196,7 @@
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 
 	tmp = RREG32(AVIVO_D1VGA_CONTROL);
 	WREG32(AVIVO_D1VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
@@ -346,20 +344,6 @@
 /*
  * Global GPU functions
  */
-void rs600_disable_vga(struct radeon_device *rdev)
-{
-	unsigned tmp;
-
-	WREG32(0x330, 0);
-	WREG32(0x338, 0);
-	tmp = RREG32(0x300);
-	tmp &= ~(3 << 16);
-	WREG32(0x300, tmp);
-	WREG32(0x308, (1 << 8));
-	WREG32(0x310, rdev->mc.vram_location);
-	WREG32(0x594, 0);
-}
-
 int rs600_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
@@ -385,7 +369,7 @@
 {
 	/* FIXME: HDP same place on rs600 ? */
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 	/* FIXME: is this correct ? */
 	r420_pipes_init(rdev);
 	if (rs600_mc_wait_for_idle(rdev)) {
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 0f585ca..7a0098d 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -40,7 +40,6 @@
 int rs400_gart_enable(struct radeon_device *rdev);
 void rs400_gart_adjust_size(struct radeon_device *rdev);
 void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
 
 /* This files gather functions specifics to :
  * rs690,rs740
@@ -125,7 +124,7 @@
 {
 	/* FIXME: HDP same place on rs690 ? */
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 	/* FIXME: is this correct ? */
 	r420_pipes_init(rdev);
 	if (rs690_mc_wait_for_idle(rdev)) {
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index fd79974..e53b5ca 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -29,37 +29,17 @@
 #include "drmP.h"
 #include "rv515d.h"
 #include "radeon.h"
-
+#include "atom.h"
 #include "rv515_reg_safe.h"
-/* rv515 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_cp_reset(struct radeon_device *rdev);
-int r100_rb2d_reset(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
 
-/* This files gather functions specifics to:
- * rv515
- *
- * Some of these functions might be used by newer ASICs.
- */
+/* This files gather functions specifics to: rv515 */
 int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
 int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
 void rv515_gpu_init(struct radeon_device *rdev);
 int rv515_mc_wait_for_idle(struct radeon_device *rdev);
 
-
-/*
- * MC
- */
-int rv515_mc_init(struct radeon_device *rdev)
+void rv515_debugfs(struct radeon_device *rdev)
 {
-	uint32_t tmp;
-	int r;
-
 	if (r100_debugfs_rbbm_init(rdev)) {
 		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
 	}
@@ -69,67 +49,8 @@
 	if (rv515_debugfs_ga_info_init(rdev)) {
 		DRM_ERROR("Failed to register debugfs file for pipes !\n");
 	}
-
-	rv515_gpu_init(rdev);
-	rv370_pcie_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	rs600_mc_disable_clients(rdev);
-	if (rv515_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
-	tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32(0x134, tmp);
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(MC_FB_LOCATION, tmp);
-	WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	WREG32(0x310, rdev->mc.vram_location);
-	if (rdev->flags & RADEON_IS_AGP) {
-		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(MC_AGP_LOCATION, tmp);
-		WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(MC_AGP_BASE_2, 0);
-	} else {
-		WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(MC_AGP_BASE, 0);
-		WREG32_MC(MC_AGP_BASE_2, 0);
-	}
-	return 0;
 }
 
-void rv515_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
 void rv515_ring_start(struct radeon_device *rdev)
 {
 	int r;
@@ -198,11 +119,6 @@
 	radeon_ring_unlock_commit(rdev);
 }
 
-void rv515_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
 int rv515_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
@@ -219,6 +135,12 @@
 	return -1;
 }
 
+void rv515_vga_render_disable(struct radeon_device *rdev)
+{
+	WREG32(R_000300_VGA_RENDER_CONTROL,
+		RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL);
+}
+
 void rv515_gpu_init(struct radeon_device *rdev)
 {
 	unsigned pipe_select_current, gb_pipe_select, tmp;
@@ -231,7 +153,7 @@
 		       "reseting GPU. Bad things might happen.\n");
 	}
 
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 
 	r420_pipes_init(rdev);
 	gb_pipe_select = RREG32(0x402C);
@@ -335,10 +257,6 @@
 	return 0;
 }
 
-
-/*
- * VRAM info
- */
 static void rv515_vram_get_type(struct radeon_device *rdev)
 {
 	uint32_t tmp;
@@ -374,10 +292,6 @@
 	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
-
-/*
- * Indirect registers accessor
- */
 uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
@@ -395,9 +309,6 @@
 	WREG32(MC_IND_INDEX, 0);
 }
 
-/*
- * Debugfs info
- */
 #if defined(CONFIG_DEBUG_FS)
 static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
 {
@@ -459,13 +370,258 @@
 #endif
 }
 
-/*
- * Asic initialization
- */
-int rv515_init(struct radeon_device *rdev)
+void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+	save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL);
+	save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL);
+	save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL);
+	save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL);
+	save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL);
+	save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL);
+
+	/* Stop all video */
+	WREG32(R_000330_D1VGA_CONTROL, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+	WREG32(R_000300_VGA_RENDER_CONTROL, 0);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+	WREG32(R_006080_D1CRTC_CONTROL, 0);
+	WREG32(R_006880_D2CRTC_CONTROL, 0);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+}
+
+void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+	WREG32(R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_000310_VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
+	/* Unlock host access */
+	WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control);
+	mdelay(1);
+	/* Restore video state */
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+	WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control);
+	WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+	WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control);
+	WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control);
+	WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control);
+}
+
+void rv515_mc_program(struct radeon_device *rdev)
+{
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (rv515_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	/* Write VRAM size in case we are limiting it */
+	WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Program MC, should be a 32bits limited address space */
+	WREG32_MC(R_000001_MC_FB_LOCATION,
+			S_000001_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000001_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+	if (rdev->flags & RADEON_IS_AGP) {
+		WREG32_MC(R_000002_MC_AGP_LOCATION,
+			S_000002_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+			S_000002_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+		WREG32_MC(R_000003_MC_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+		WREG32_MC(R_000004_MC_AGP_BASE_2,
+			S_000004_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+	} else {
+		WREG32_MC(R_000002_MC_AGP_LOCATION, 0xFFFFFFFF);
+		WREG32_MC(R_000003_MC_AGP_BASE, 0);
+		WREG32_MC(R_000004_MC_AGP_BASE_2, 0);
+	}
+
+	rv515_mc_resume(rdev, &save);
+}
+
+void rv515_clock_startup(struct radeon_device *rdev)
+{
+	if (radeon_dynclks != -1 && radeon_dynclks)
+		radeon_atom_set_clock_gating(rdev, 1);
+	/* We need to force on some of the block */
+	WREG32_PLL(R_00000F_CP_DYN_CNTL,
+		RREG32_PLL(R_00000F_CP_DYN_CNTL) | S_00000F_CP_FORCEON(1));
+	WREG32_PLL(R_000011_E2_DYN_CNTL,
+		RREG32_PLL(R_000011_E2_DYN_CNTL) | S_000011_E2_FORCEON(1));
+	WREG32_PLL(R_000013_IDCT_DYN_CNTL,
+		RREG32_PLL(R_000013_IDCT_DYN_CNTL) | S_000013_IDCT_FORCEON(1));
+}
+
+static int rv515_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	rv515_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	rv515_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	r100_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int rv515_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return rv515_startup(rdev);
+}
+
+int rv515_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	r100_irq_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	return 0;
+}
+
+void rv515_set_safe_registers(struct radeon_device *rdev)
 {
 	rdev->config.r300.reg_safe_bm = rv515_reg_safe_bm;
 	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rv515_reg_safe_bm);
+}
+
+void rv515_fini(struct radeon_device *rdev)
+{
+	rv515_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+    rv370_pcie_gart_fini(rdev);
+	radeon_agp_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int rv515_init(struct radeon_device *rdev)
+{
+	int r;
+
+	rdev->new_init_path = true;
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	rv515_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rv515_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rv370_pcie_gart_init(rdev);
+	if (r)
+		return r;
+	rv515_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = rv515_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rv515_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rv370_pcie_gart_fini(rdev);
+		radeon_agp_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/rv515d.h b/drivers/gpu/drm/radeon/rv515d.h
index a65e17e..fc216e4 100644
--- a/drivers/gpu/drm/radeon/rv515d.h
+++ b/drivers/gpu/drm/radeon/rv515d.h
@@ -216,5 +216,388 @@
 #define CP_PACKET0_GET_ONE_REG_WR(h) (((h) >> 15) & 1)
 #define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
 
-#endif
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE                      0x0000F8
+#define   S_0000F8_CONFIG_MEMSIZE(x)                   (((x) & 0xFFFFFFFF) << 0)
+#define   G_0000F8_CONFIG_MEMSIZE(x)                   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0000F8_CONFIG_MEMSIZE                      0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_000300_VGA_RENDER_CONTROL                  0x000300
+#define   S_000300_VGA_BLINK_RATE(x)                   (((x) & 0x1F) << 0)
+#define   G_000300_VGA_BLINK_RATE(x)                   (((x) >> 0) & 0x1F)
+#define   C_000300_VGA_BLINK_RATE                      0xFFFFFFE0
+#define   S_000300_VGA_BLINK_MODE(x)                   (((x) & 0x3) << 5)
+#define   G_000300_VGA_BLINK_MODE(x)                   (((x) >> 5) & 0x3)
+#define   C_000300_VGA_BLINK_MODE                      0xFFFFFF9F
+#define   S_000300_VGA_CURSOR_BLINK_INVERT(x)          (((x) & 0x1) << 7)
+#define   G_000300_VGA_CURSOR_BLINK_INVERT(x)          (((x) >> 7) & 0x1)
+#define   C_000300_VGA_CURSOR_BLINK_INVERT             0xFFFFFF7F
+#define   S_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x)       (((x) & 0x1) << 8)
+#define   G_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x)       (((x) >> 8) & 0x1)
+#define   C_000300_VGA_EXTD_ADDR_COUNT_ENABLE          0xFFFFFEFF
+#define   S_000300_VGA_VSTATUS_CNTL(x)                 (((x) & 0x3) << 16)
+#define   G_000300_VGA_VSTATUS_CNTL(x)                 (((x) >> 16) & 0x3)
+#define   C_000300_VGA_VSTATUS_CNTL                    0xFFFCFFFF
+#define   S_000300_VGA_LOCK_8DOT(x)                    (((x) & 0x1) << 24)
+#define   G_000300_VGA_LOCK_8DOT(x)                    (((x) >> 24) & 0x1)
+#define   C_000300_VGA_LOCK_8DOT                       0xFEFFFFFF
+#define   S_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) & 0x1) << 25)
+#define   G_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) >> 25) & 0x1)
+#define   C_000300_VGAREG_LINECMP_COMPATIBILITY_SEL    0xFDFFFFFF
+#define R_000310_VGA_MEMORY_BASE_ADDRESS             0x000310
+#define   S_000310_VGA_MEMORY_BASE_ADDRESS(x)          (((x) & 0xFFFFFFFF) << 0)
+#define   G_000310_VGA_MEMORY_BASE_ADDRESS(x)          (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000310_VGA_MEMORY_BASE_ADDRESS             0x00000000
+#define R_000328_VGA_HDP_CONTROL                     0x000328
+#define   S_000328_VGA_MEM_PAGE_SELECT_EN(x)           (((x) & 0x1) << 0)
+#define   G_000328_VGA_MEM_PAGE_SELECT_EN(x)           (((x) >> 0) & 0x1)
+#define   C_000328_VGA_MEM_PAGE_SELECT_EN              0xFFFFFFFE
+#define   S_000328_VGA_RBBM_LOCK_DISABLE(x)            (((x) & 0x1) << 8)
+#define   G_000328_VGA_RBBM_LOCK_DISABLE(x)            (((x) >> 8) & 0x1)
+#define   C_000328_VGA_RBBM_LOCK_DISABLE               0xFFFFFEFF
+#define   S_000328_VGA_SOFT_RESET(x)                   (((x) & 0x1) << 16)
+#define   G_000328_VGA_SOFT_RESET(x)                   (((x) >> 16) & 0x1)
+#define   C_000328_VGA_SOFT_RESET                      0xFFFEFFFF
+#define   S_000328_VGA_TEST_RESET_CONTROL(x)           (((x) & 0x1) << 24)
+#define   G_000328_VGA_TEST_RESET_CONTROL(x)           (((x) >> 24) & 0x1)
+#define   C_000328_VGA_TEST_RESET_CONTROL              0xFEFFFFFF
+#define R_000330_D1VGA_CONTROL                       0x000330
+#define   S_000330_D1VGA_MODE_ENABLE(x)                (((x) & 0x1) << 0)
+#define   G_000330_D1VGA_MODE_ENABLE(x)                (((x) >> 0) & 0x1)
+#define   C_000330_D1VGA_MODE_ENABLE                   0xFFFFFFFE
+#define   S_000330_D1VGA_TIMING_SELECT(x)              (((x) & 0x1) << 8)
+#define   G_000330_D1VGA_TIMING_SELECT(x)              (((x) >> 8) & 0x1)
+#define   C_000330_D1VGA_TIMING_SELECT                 0xFFFFFEFF
+#define   S_000330_D1VGA_SYNC_POLARITY_SELECT(x)       (((x) & 0x1) << 9)
+#define   G_000330_D1VGA_SYNC_POLARITY_SELECT(x)       (((x) >> 9) & 0x1)
+#define   C_000330_D1VGA_SYNC_POLARITY_SELECT          0xFFFFFDFF
+#define   S_000330_D1VGA_OVERSCAN_TIMING_SELECT(x)     (((x) & 0x1) << 10)
+#define   G_000330_D1VGA_OVERSCAN_TIMING_SELECT(x)     (((x) >> 10) & 0x1)
+#define   C_000330_D1VGA_OVERSCAN_TIMING_SELECT        0xFFFFFBFF
+#define   S_000330_D1VGA_OVERSCAN_COLOR_EN(x)          (((x) & 0x1) << 16)
+#define   G_000330_D1VGA_OVERSCAN_COLOR_EN(x)          (((x) >> 16) & 0x1)
+#define   C_000330_D1VGA_OVERSCAN_COLOR_EN             0xFFFEFFFF
+#define   S_000330_D1VGA_ROTATE(x)                     (((x) & 0x3) << 24)
+#define   G_000330_D1VGA_ROTATE(x)                     (((x) >> 24) & 0x3)
+#define   C_000330_D1VGA_ROTATE                        0xFCFFFFFF
+#define R_000338_D2VGA_CONTROL                       0x000338
+#define   S_000338_D2VGA_MODE_ENABLE(x)                (((x) & 0x1) << 0)
+#define   G_000338_D2VGA_MODE_ENABLE(x)                (((x) >> 0) & 0x1)
+#define   C_000338_D2VGA_MODE_ENABLE                   0xFFFFFFFE
+#define   S_000338_D2VGA_TIMING_SELECT(x)              (((x) & 0x1) << 8)
+#define   G_000338_D2VGA_TIMING_SELECT(x)              (((x) >> 8) & 0x1)
+#define   C_000338_D2VGA_TIMING_SELECT                 0xFFFFFEFF
+#define   S_000338_D2VGA_SYNC_POLARITY_SELECT(x)       (((x) & 0x1) << 9)
+#define   G_000338_D2VGA_SYNC_POLARITY_SELECT(x)       (((x) >> 9) & 0x1)
+#define   C_000338_D2VGA_SYNC_POLARITY_SELECT          0xFFFFFDFF
+#define   S_000338_D2VGA_OVERSCAN_TIMING_SELECT(x)     (((x) & 0x1) << 10)
+#define   G_000338_D2VGA_OVERSCAN_TIMING_SELECT(x)     (((x) >> 10) & 0x1)
+#define   C_000338_D2VGA_OVERSCAN_TIMING_SELECT        0xFFFFFBFF
+#define   S_000338_D2VGA_OVERSCAN_COLOR_EN(x)          (((x) & 0x1) << 16)
+#define   G_000338_D2VGA_OVERSCAN_COLOR_EN(x)          (((x) >> 16) & 0x1)
+#define   C_000338_D2VGA_OVERSCAN_COLOR_EN             0xFFFEFFFF
+#define   S_000338_D2VGA_ROTATE(x)                     (((x) & 0x3) << 24)
+#define   G_000338_D2VGA_ROTATE(x)                     (((x) >> 24) & 0x3)
+#define   C_000338_D2VGA_ROTATE                        0xFCFFFFFF
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_RBBM_HIBUSY(x)                      (((x) & 0x1) << 28)
+#define   G_000E40_RBBM_HIBUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_000E40_RBBM_HIBUSY                         0xEFFFFFFF
+#define   S_000E40_SKID_CFBUSY(x)                      (((x) & 0x1) << 29)
+#define   G_000E40_SKID_CFBUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_000E40_SKID_CFBUSY                         0xDFFFFFFF
+#define   S_000E40_VAP_VF_BUSY(x)                      (((x) & 0x1) << 30)
+#define   G_000E40_VAP_VF_BUSY(x)                      (((x) >> 30) & 0x1)
+#define   C_000E40_VAP_VF_BUSY                         0xBFFFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+#define R_006080_D1CRTC_CONTROL                      0x006080
+#define   S_006080_D1CRTC_MASTER_EN(x)                 (((x) & 0x1) << 0)
+#define   G_006080_D1CRTC_MASTER_EN(x)                 (((x) >> 0) & 0x1)
+#define   C_006080_D1CRTC_MASTER_EN                    0xFFFFFFFE
+#define   S_006080_D1CRTC_SYNC_RESET_SEL(x)            (((x) & 0x1) << 4)
+#define   G_006080_D1CRTC_SYNC_RESET_SEL(x)            (((x) >> 4) & 0x1)
+#define   C_006080_D1CRTC_SYNC_RESET_SEL               0xFFFFFFEF
+#define   S_006080_D1CRTC_DISABLE_POINT_CNTL(x)        (((x) & 0x3) << 8)
+#define   G_006080_D1CRTC_DISABLE_POINT_CNTL(x)        (((x) >> 8) & 0x3)
+#define   C_006080_D1CRTC_DISABLE_POINT_CNTL           0xFFFFFCFF
+#define   S_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) & 0x1) << 16)
+#define   G_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) >> 16) & 0x1)
+#define   C_006080_D1CRTC_CURRENT_MASTER_EN_STATE      0xFFFEFFFF
+#define   S_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define   G_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define   C_006080_D1CRTC_DISP_READ_REQUEST_DISABLE    0xFEFFFFFF
+#define R_0060E8_D1CRTC_UPDATE_LOCK                  0x0060E8
+#define   S_0060E8_D1CRTC_UPDATE_LOCK(x)               (((x) & 0x1) << 0)
+#define   G_0060E8_D1CRTC_UPDATE_LOCK(x)               (((x) >> 0) & 0x1)
+#define   C_0060E8_D1CRTC_UPDATE_LOCK                  0xFFFFFFFE
+#define R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS      0x006110
+#define   S_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) & 0xFFFFFFFF) << 0)
+#define   G_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS      0x00000000
+#define R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS    0x006118
+#define   S_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define   G_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS    0x00000000
+#define R_006880_D2CRTC_CONTROL                      0x006880
+#define   S_006880_D2CRTC_MASTER_EN(x)                 (((x) & 0x1) << 0)
+#define   G_006880_D2CRTC_MASTER_EN(x)                 (((x) >> 0) & 0x1)
+#define   C_006880_D2CRTC_MASTER_EN                    0xFFFFFFFE
+#define   S_006880_D2CRTC_SYNC_RESET_SEL(x)            (((x) & 0x1) << 4)
+#define   G_006880_D2CRTC_SYNC_RESET_SEL(x)            (((x) >> 4) & 0x1)
+#define   C_006880_D2CRTC_SYNC_RESET_SEL               0xFFFFFFEF
+#define   S_006880_D2CRTC_DISABLE_POINT_CNTL(x)        (((x) & 0x3) << 8)
+#define   G_006880_D2CRTC_DISABLE_POINT_CNTL(x)        (((x) >> 8) & 0x3)
+#define   C_006880_D2CRTC_DISABLE_POINT_CNTL           0xFFFFFCFF
+#define   S_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) & 0x1) << 16)
+#define   G_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) >> 16) & 0x1)
+#define   C_006880_D2CRTC_CURRENT_MASTER_EN_STATE      0xFFFEFFFF
+#define   S_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define   G_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define   C_006880_D2CRTC_DISP_READ_REQUEST_DISABLE    0xFEFFFFFF
+#define R_0068E8_D2CRTC_UPDATE_LOCK                  0x0068E8
+#define   S_0068E8_D2CRTC_UPDATE_LOCK(x)               (((x) & 0x1) << 0)
+#define   G_0068E8_D2CRTC_UPDATE_LOCK(x)               (((x) >> 0) & 0x1)
+#define   C_0068E8_D2CRTC_UPDATE_LOCK                  0xFFFFFFFE
+#define R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS      0x006910
+#define   S_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) & 0xFFFFFFFF) << 0)
+#define   G_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS      0x00000000
+#define R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS    0x006918
+#define   S_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define   G_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS    0x00000000
 
+
+#define R_000001_MC_FB_LOCATION                      0x000001
+#define   S_000001_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000001_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000001_MC_FB_START                         0xFFFF0000
+#define   S_000001_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000001_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000001_MC_FB_TOP                           0x0000FFFF
+#define R_000002_MC_AGP_LOCATION                     0x000002
+#define   S_000002_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000002_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000002_MC_AGP_START                        0xFFFF0000
+#define   S_000002_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_000002_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_000002_MC_AGP_TOP                          0x0000FFFF
+#define R_000003_MC_AGP_BASE                         0x000003
+#define   S_000003_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000003_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000003_AGP_BASE_ADDR                       0x00000000
+#define R_000004_MC_AGP_BASE_2                       0x000004
+#define   S_000004_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_000004_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_000004_AGP_BASE_ADDR_2                     0xFFFFFFF0
+
+
+#define R_00000F_CP_DYN_CNTL                         0x00000F
+#define   S_00000F_CP_FORCEON(x)                       (((x) & 0x1) << 0)
+#define   G_00000F_CP_FORCEON(x)                       (((x) >> 0) & 0x1)
+#define   C_00000F_CP_FORCEON                          0xFFFFFFFE
+#define   S_00000F_CP_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 1)
+#define   G_00000F_CP_MAX_DYN_STOP_LAT(x)              (((x) >> 1) & 0x1)
+#define   C_00000F_CP_MAX_DYN_STOP_LAT                 0xFFFFFFFD
+#define   S_00000F_CP_CLOCK_STATUS(x)                  (((x) & 0x1) << 2)
+#define   G_00000F_CP_CLOCK_STATUS(x)                  (((x) >> 2) & 0x1)
+#define   C_00000F_CP_CLOCK_STATUS                     0xFFFFFFFB
+#define   S_00000F_CP_PROG_SHUTOFF(x)                  (((x) & 0x1) << 3)
+#define   G_00000F_CP_PROG_SHUTOFF(x)                  (((x) >> 3) & 0x1)
+#define   C_00000F_CP_PROG_SHUTOFF                     0xFFFFFFF7
+#define   S_00000F_CP_PROG_DELAY_VALUE(x)              (((x) & 0xFF) << 4)
+#define   G_00000F_CP_PROG_DELAY_VALUE(x)              (((x) >> 4) & 0xFF)
+#define   C_00000F_CP_PROG_DELAY_VALUE                 0xFFFFF00F
+#define   S_00000F_CP_LOWER_POWER_IDLE(x)              (((x) & 0xFF) << 12)
+#define   G_00000F_CP_LOWER_POWER_IDLE(x)              (((x) >> 12) & 0xFF)
+#define   C_00000F_CP_LOWER_POWER_IDLE                 0xFFF00FFF
+#define   S_00000F_CP_LOWER_POWER_IGNORE(x)            (((x) & 0x1) << 20)
+#define   G_00000F_CP_LOWER_POWER_IGNORE(x)            (((x) >> 20) & 0x1)
+#define   C_00000F_CP_LOWER_POWER_IGNORE               0xFFEFFFFF
+#define   S_00000F_CP_NORMAL_POWER_IGNORE(x)           (((x) & 0x1) << 21)
+#define   G_00000F_CP_NORMAL_POWER_IGNORE(x)           (((x) >> 21) & 0x1)
+#define   C_00000F_CP_NORMAL_POWER_IGNORE              0xFFDFFFFF
+#define   S_00000F_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_00000F_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_00000F_SPARE                               0xFF3FFFFF
+#define   S_00000F_CP_NORMAL_POWER_BUSY(x)             (((x) & 0xFF) << 24)
+#define   G_00000F_CP_NORMAL_POWER_BUSY(x)             (((x) >> 24) & 0xFF)
+#define   C_00000F_CP_NORMAL_POWER_BUSY                0x00FFFFFF
+#define R_000011_E2_DYN_CNTL                         0x000011
+#define   S_000011_E2_FORCEON(x)                       (((x) & 0x1) << 0)
+#define   G_000011_E2_FORCEON(x)                       (((x) >> 0) & 0x1)
+#define   C_000011_E2_FORCEON                          0xFFFFFFFE
+#define   S_000011_E2_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 1)
+#define   G_000011_E2_MAX_DYN_STOP_LAT(x)              (((x) >> 1) & 0x1)
+#define   C_000011_E2_MAX_DYN_STOP_LAT                 0xFFFFFFFD
+#define   S_000011_E2_CLOCK_STATUS(x)                  (((x) & 0x1) << 2)
+#define   G_000011_E2_CLOCK_STATUS(x)                  (((x) >> 2) & 0x1)
+#define   C_000011_E2_CLOCK_STATUS                     0xFFFFFFFB
+#define   S_000011_E2_PROG_SHUTOFF(x)                  (((x) & 0x1) << 3)
+#define   G_000011_E2_PROG_SHUTOFF(x)                  (((x) >> 3) & 0x1)
+#define   C_000011_E2_PROG_SHUTOFF                     0xFFFFFFF7
+#define   S_000011_E2_PROG_DELAY_VALUE(x)              (((x) & 0xFF) << 4)
+#define   G_000011_E2_PROG_DELAY_VALUE(x)              (((x) >> 4) & 0xFF)
+#define   C_000011_E2_PROG_DELAY_VALUE                 0xFFFFF00F
+#define   S_000011_E2_LOWER_POWER_IDLE(x)              (((x) & 0xFF) << 12)
+#define   G_000011_E2_LOWER_POWER_IDLE(x)              (((x) >> 12) & 0xFF)
+#define   C_000011_E2_LOWER_POWER_IDLE                 0xFFF00FFF
+#define   S_000011_E2_LOWER_POWER_IGNORE(x)            (((x) & 0x1) << 20)
+#define   G_000011_E2_LOWER_POWER_IGNORE(x)            (((x) >> 20) & 0x1)
+#define   C_000011_E2_LOWER_POWER_IGNORE               0xFFEFFFFF
+#define   S_000011_E2_NORMAL_POWER_IGNORE(x)           (((x) & 0x1) << 21)
+#define   G_000011_E2_NORMAL_POWER_IGNORE(x)           (((x) >> 21) & 0x1)
+#define   C_000011_E2_NORMAL_POWER_IGNORE              0xFFDFFFFF
+#define   S_000011_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_000011_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_000011_SPARE                               0xFF3FFFFF
+#define   S_000011_E2_NORMAL_POWER_BUSY(x)             (((x) & 0xFF) << 24)
+#define   G_000011_E2_NORMAL_POWER_BUSY(x)             (((x) >> 24) & 0xFF)
+#define   C_000011_E2_NORMAL_POWER_BUSY                0x00FFFFFF
+#define R_000013_IDCT_DYN_CNTL                       0x000013
+#define   S_000013_IDCT_FORCEON(x)                     (((x) & 0x1) << 0)
+#define   G_000013_IDCT_FORCEON(x)                     (((x) >> 0) & 0x1)
+#define   C_000013_IDCT_FORCEON                        0xFFFFFFFE
+#define   S_000013_IDCT_MAX_DYN_STOP_LAT(x)            (((x) & 0x1) << 1)
+#define   G_000013_IDCT_MAX_DYN_STOP_LAT(x)            (((x) >> 1) & 0x1)
+#define   C_000013_IDCT_MAX_DYN_STOP_LAT               0xFFFFFFFD
+#define   S_000013_IDCT_CLOCK_STATUS(x)                (((x) & 0x1) << 2)
+#define   G_000013_IDCT_CLOCK_STATUS(x)                (((x) >> 2) & 0x1)
+#define   C_000013_IDCT_CLOCK_STATUS                   0xFFFFFFFB
+#define   S_000013_IDCT_PROG_SHUTOFF(x)                (((x) & 0x1) << 3)
+#define   G_000013_IDCT_PROG_SHUTOFF(x)                (((x) >> 3) & 0x1)
+#define   C_000013_IDCT_PROG_SHUTOFF                   0xFFFFFFF7
+#define   S_000013_IDCT_PROG_DELAY_VALUE(x)            (((x) & 0xFF) << 4)
+#define   G_000013_IDCT_PROG_DELAY_VALUE(x)            (((x) >> 4) & 0xFF)
+#define   C_000013_IDCT_PROG_DELAY_VALUE               0xFFFFF00F
+#define   S_000013_IDCT_LOWER_POWER_IDLE(x)            (((x) & 0xFF) << 12)
+#define   G_000013_IDCT_LOWER_POWER_IDLE(x)            (((x) >> 12) & 0xFF)
+#define   C_000013_IDCT_LOWER_POWER_IDLE               0xFFF00FFF
+#define   S_000013_IDCT_LOWER_POWER_IGNORE(x)          (((x) & 0x1) << 20)
+#define   G_000013_IDCT_LOWER_POWER_IGNORE(x)          (((x) >> 20) & 0x1)
+#define   C_000013_IDCT_LOWER_POWER_IGNORE             0xFFEFFFFF
+#define   S_000013_IDCT_NORMAL_POWER_IGNORE(x)         (((x) & 0x1) << 21)
+#define   G_000013_IDCT_NORMAL_POWER_IGNORE(x)         (((x) >> 21) & 0x1)
+#define   C_000013_IDCT_NORMAL_POWER_IGNORE            0xFFDFFFFF
+#define   S_000013_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_000013_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_000013_SPARE                               0xFF3FFFFF
+#define   S_000013_IDCT_NORMAL_POWER_BUSY(x)           (((x) & 0xFF) << 24)
+#define   G_000013_IDCT_NORMAL_POWER_BUSY(x)           (((x) >> 24) & 0xFF)
+#define   C_000013_IDCT_NORMAL_POWER_BUSY              0x00FFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b574c73..e0b97d1 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -31,8 +31,8 @@
 #include "radeon.h"
 #include "radeon_drm.h"
 #include "rv770d.h"
-#include "avivod.h"
 #include "atom.h"
+#include "avivod.h"
 
 #define R700_PFP_UCODE_SIZE 848
 #define R700_PM4_UCODE_SIZE 1360
@@ -231,7 +231,7 @@
 
 	/* we need to own VRAM, so turn off the VGA renderer here
 	 * to stop it overwriting our objects */
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 }
 
 
@@ -801,6 +801,13 @@
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 33de763..1c040d0 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -228,7 +228,7 @@
 	vma->vm_private_data = NULL;
 }
 
-static struct vm_operations_struct ttm_bo_vm_ops = {
+static const struct vm_operations_struct ttm_bo_vm_ops = {
 	.fault = ttm_bo_vm_fault,
 	.open = ttm_bo_vm_open,
 	.close = ttm_bo_vm_close
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6bedd2f..737335f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -477,8 +477,8 @@
 	  will be called i2c-pnx.
 
 config I2C_PXA
-	tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ARCH_PXA
+	tristate "Intel PXA2XX I2C adapter"
+	depends on ARCH_PXA || ARCH_MMP
 	help
 	  If you have devices in the PXA I2C bus, say yes to this option.
 	  This driver can also be built as a module.  If so, the module
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 276a046..b4a55d4 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -369,9 +369,8 @@
 		goto err;
 
 	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
-		"SMBus CMI adapter %s (%s)",
-		acpi_device_name(device),
-		acpi_device_uid(device));
+		"SMBus CMI adapter %s",
+		acpi_device_name(device));
 	smbus_cmi->adapter.owner = THIS_MODULE;
 	smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
 	smbus_cmi->adapter.algo_data = smbus_cmi;
diff --git a/drivers/ieee1394/dma.c b/drivers/ieee1394/dma.c
index 1aba8c1..8e7e334 100644
--- a/drivers/ieee1394/dma.c
+++ b/drivers/ieee1394/dma.c
@@ -247,7 +247,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct dma_region_vm_ops = {
+static const struct vm_operations_struct dma_region_vm_ops = {
 	.fault = dma_region_pagefault,
 };
 
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index 57a3c6f..4e0f282 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -37,7 +37,8 @@
 enum rmpp_state {
 	RMPP_STATE_ACTIVE,
 	RMPP_STATE_TIMEOUT,
-	RMPP_STATE_COMPLETE
+	RMPP_STATE_COMPLETE,
+	RMPP_STATE_CANCELING
 };
 
 struct mad_rmpp_recv {
@@ -87,18 +88,22 @@
 
 	spin_lock_irqsave(&agent->lock, flags);
 	list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
+		if (rmpp_recv->state != RMPP_STATE_COMPLETE)
+			ib_free_recv_mad(rmpp_recv->rmpp_wc);
+		rmpp_recv->state = RMPP_STATE_CANCELING;
+	}
+	spin_unlock_irqrestore(&agent->lock, flags);
+
+	list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
 		cancel_delayed_work(&rmpp_recv->timeout_work);
 		cancel_delayed_work(&rmpp_recv->cleanup_work);
 	}
-	spin_unlock_irqrestore(&agent->lock, flags);
 
 	flush_workqueue(agent->qp_info->port_priv->wq);
 
 	list_for_each_entry_safe(rmpp_recv, temp_rmpp_recv,
 				 &agent->rmpp_list, list) {
 		list_del(&rmpp_recv->list);
-		if (rmpp_recv->state != RMPP_STATE_COMPLETE)
-			ib_free_recv_mad(rmpp_recv->rmpp_wc);
 		destroy_rmpp_recv(rmpp_recv);
 	}
 }
@@ -260,6 +265,10 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&rmpp_recv->agent->lock, flags);
+	if (rmpp_recv->state == RMPP_STATE_CANCELING) {
+		spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
+		return;
+	}
 	list_del(&rmpp_recv->list);
 	spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
 	destroy_rmpp_recv(rmpp_recv);
diff --git a/drivers/infiniband/hw/ehca/ehca_uverbs.c b/drivers/infiniband/hw/ehca/ehca_uverbs.c
index 3cb688d..f1565ca 100644
--- a/drivers/infiniband/hw/ehca/ehca_uverbs.c
+++ b/drivers/infiniband/hw/ehca/ehca_uverbs.c
@@ -95,7 +95,7 @@
 		     vma->vm_start, vma->vm_end, *count);
 }
 
-static struct vm_operations_struct vm_ops = {
+static const struct vm_operations_struct vm_ops = {
 	.open =	ehca_mm_open,
 	.close = ehca_mm_close,
 };
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 38a2870..40dbe54 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1151,7 +1151,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct ipath_file_vm_ops = {
+static const struct vm_operations_struct ipath_file_vm_ops = {
 	.fault = ipath_file_vma_fault,
 };
 
diff --git a/drivers/infiniband/hw/ipath/ipath_mmap.c b/drivers/infiniband/hw/ipath/ipath_mmap.c
index fa830e2..b28865f 100644
--- a/drivers/infiniband/hw/ipath/ipath_mmap.c
+++ b/drivers/infiniband/hw/ipath/ipath_mmap.c
@@ -74,7 +74,7 @@
 	kref_put(&ip->ref, ipath_release_mmap_info);
 }
 
-static struct vm_operations_struct ipath_vm_ops = {
+static const struct vm_operations_struct ipath_vm_ops = {
 	.open =     ipath_vma_open,
 	.close =    ipath_vma_close,
 };
diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c
index 056b2a4..0aa0110 100644
--- a/drivers/infiniband/hw/mthca/mthca_catas.c
+++ b/drivers/infiniband/hw/mthca/mthca_catas.c
@@ -68,11 +68,16 @@
 	spin_unlock_irq(&catas_lock);
 
 	list_for_each_entry_safe(dev, tmpdev, &tlist, catas_err.list) {
+		struct pci_dev *pdev = dev->pdev;
 		ret = __mthca_restart_one(dev->pdev);
+		/* 'dev' now is not valid */
 		if (ret)
-			mthca_err(dev, "Reset failed (%d)\n", ret);
-		else
-			mthca_dbg(dev, "Reset succeeded\n");
+			printk(KERN_ERR "mthca %s: Reset failed (%d)\n",
+			       pci_name(pdev), ret);
+		else {
+			struct mthca_dev *d = pci_get_drvdata(pdev);
+			mthca_dbg(d, "Reset succeeded\n");
+		}
 	}
 
 	mutex_unlock(&mthca_device_mutex);
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 538e409..e593af3 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1566,7 +1566,6 @@
 	.ndo_set_mac_address	= nes_netdev_set_mac_address,
 	.ndo_set_multicast_list = nes_netdev_set_multicast_list,
 	.ndo_change_mtu		= nes_netdev_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_vlan_rx_register 	= nes_netdev_vlan_rx_register,
 };
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 25874fc..8763c1e 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -362,12 +362,19 @@
 {
 	struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
 						   carrier_on_task);
+	struct ib_port_attr attr;
 
 	/*
 	 * Take rtnl_lock to avoid racing with ipoib_stop() and
 	 * turning the carrier back on while a device is being
 	 * removed.
 	 */
+	if (ib_query_port(priv->ca, priv->port, &attr) ||
+	    attr.state != IB_PORT_ACTIVE) {
+		ipoib_dbg(priv, "Keeping carrier off until IB port is active\n");
+		return;
+	}
+
 	rtnl_lock();
 	netif_carrier_on(priv->dev);
 	rtnl_unlock();
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 7c8e712..e4f599f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -150,9 +150,9 @@
 	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
 	depends on LEDS_CLASS && I2C
 	help
-    This option enables support for LEDs connected to the National
-    Semiconductor LP3944 Lighting Management Unit (LMU) also known as
-    Fun Light Chip.
+	  This option enables support for LEDs connected to the National
+	  Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+	  Fun Light Chip.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-lp3944.
@@ -195,6 +195,13 @@
 	  LED driver chips accessed via the I2C bus.  Supported
 	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 
+config LEDS_WM831X_STATUS
+	tristate "LED support for status LEDs on WM831x PMICs"
+	depends on LEDS_CLASS && MFD_WM831X
+	help
+	  This option enables support for the status LEDs of the WM831x
+          series of PMICs.
+
 config LEDS_WM8350
 	tristate "LED Support for WM8350 AudioPlus PMIC"
 	depends on LEDS_CLASS && MFD_WM8350
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index e8cdcf7..46d7270 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -26,6 +26,7 @@
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
 obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
+obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
 obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
 
diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c
index f2242db..a498135 100644
--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -153,7 +153,7 @@
 	.flags			= LED_CORE_SUSPENDRESUME,
 };
 
-static int __init clevo_mail_led_probe(struct platform_device *pdev)
+static int __devinit clevo_mail_led_probe(struct platform_device *pdev)
 {
 	return led_classdev_register(&pdev->dev, &clevo_mail_led);
 }
diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c
index 059aa29..8816806 100644
--- a/drivers/leds/leds-cobalt-qube.c
+++ b/drivers/leds/leds-cobalt-qube.c
@@ -28,7 +28,7 @@
 }
 
 static struct led_classdev qube_front_led = {
-	.name			= "qube-front",
+	.name			= "qube::front",
 	.brightness		= LED_FULL,
 	.brightness_set		= qube_front_led_set,
 	.default_trigger	= "ide-disk",
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index 5f1ce81..defc212 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -49,7 +49,7 @@
 }
 
 static struct led_classdev raq_web_led = {
-	.name		= "raq-web",
+	.name		= "raq::web",
 	.brightness_set	= raq_web_led_set,
 };
 
@@ -70,7 +70,7 @@
 }
 
 static struct led_classdev raq_power_off_led = {
-	.name			= "raq-power-off",
+	.name			= "raq::power-off",
 	.brightness_set		= raq_power_off_led_set,
 	.default_trigger	= "power-off",
 };
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 6b06638..7467980 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -80,7 +80,7 @@
 
 	/* skip leds that aren't available */
 	if (!gpio_is_valid(template->gpio)) {
-		printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n", 
+		printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n",
 				template->gpio, template->name);
 		return 0;
 	}
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index dba8921..708a801 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -34,7 +34,7 @@
 	struct i2c_client *client;
 	struct pca9532_led leds[16];
 	struct mutex update_lock;
-	struct input_dev    *idev;
+	struct input_dev *idev;
 	struct work_struct work;
 	u8 pwm[2];
 	u8 psc[2];
@@ -53,9 +53,9 @@
 
 static struct i2c_driver pca9532_driver = {
 	.driver = {
-		.name   = "pca9532",
+		.name = "pca9532",
 	},
-	.probe  = pca9532_probe,
+	.probe = pca9532_probe,
 	.remove = pca9532_remove,
 	.id_table = pca9532_id,
 };
@@ -149,7 +149,7 @@
 
 	if (*delay_on == 0 && *delay_off == 0) {
 	/* led subsystem ask us for a blink rate */
-		*delay_on  = 1000;
+		*delay_on = 1000;
 		*delay_off = 1000;
 	}
 	if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
@@ -227,7 +227,7 @@
 			break;
 		case PCA9532_TYPE_LED:
 			led->state = pled->state;
-			led->name =  pled->name;
+			led->name = pled->name;
 			led->ldev.name = led->name;
 			led->ldev.brightness = LED_OFF;
 			led->ldev.brightness_set = pca9532_set_brightness;
@@ -254,7 +254,7 @@
 			data->idev->name = pled->name;
 			data->idev->phys = "i2c/pca9532";
 			data->idev->id.bustype = BUS_HOST;
-			data->idev->id.vendor  = 0x001f;
+			data->idev->id.vendor = 0x001f;
 			data->idev->id.product = 0x0001;
 			data->idev->id.version = 0x0100;
 			data->idev->evbit[0] = BIT_MASK(EV_SND);
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
new file mode 100644
index 0000000..c586d05
--- /dev/null
+++ b/drivers/leds/leds-wm831x-status.c
@@ -0,0 +1,341 @@
+/*
+ * LED driver for WM831x status LEDs
+ *
+ * Copyright(C) 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/status.h>
+
+
+struct wm831x_status {
+	struct led_classdev cdev;
+	struct wm831x *wm831x;
+	struct work_struct work;
+	struct mutex mutex;
+
+	spinlock_t value_lock;
+	int reg;     /* Control register */
+	int reg_val; /* Control register value */
+
+	int blink;
+	int blink_time;
+	int blink_cyc;
+	int src;
+	enum led_brightness brightness;
+};
+
+#define to_wm831x_status(led_cdev) \
+	container_of(led_cdev, struct wm831x_status, cdev)
+
+static void wm831x_status_work(struct work_struct *work)
+{
+	struct wm831x_status *led = container_of(work, struct wm831x_status,
+						 work);
+	unsigned long flags;
+
+	mutex_lock(&led->mutex);
+
+	led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK |
+			  WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK);
+
+	spin_lock_irqsave(&led->value_lock, flags);
+
+	led->reg_val |= led->src << WM831X_LED_SRC_SHIFT;
+	if (led->blink) {
+		led->reg_val |= 2 << WM831X_LED_MODE_SHIFT;
+		led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT;
+		led->reg_val |= led->blink_cyc;
+	} else {
+		if (led->brightness != LED_OFF)
+			led->reg_val |= 1 << WM831X_LED_MODE_SHIFT;
+	}
+
+	spin_unlock_irqrestore(&led->value_lock, flags);
+
+	wm831x_reg_write(led->wm831x, led->reg, led->reg_val);
+
+	mutex_unlock(&led->mutex);
+}
+
+static void wm831x_status_set(struct led_classdev *led_cdev,
+			   enum led_brightness value)
+{
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&led->value_lock, flags);
+	led->brightness = value;
+	if (value == LED_OFF)
+		led->blink = 0;
+	schedule_work(&led->work);
+	spin_unlock_irqrestore(&led->value_lock, flags);
+}
+
+static int wm831x_status_blink_set(struct led_classdev *led_cdev,
+				   unsigned long *delay_on,
+				   unsigned long *delay_off)
+{
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	unsigned long flags;
+	int ret = 0;
+
+	/* Pick some defaults if we've not been given times */
+	if (*delay_on == 0 && *delay_off == 0) {
+		*delay_on = 250;
+		*delay_off = 250;
+	}
+
+	spin_lock_irqsave(&led->value_lock, flags);
+
+	/* We only have a limited selection of settings, see if we can
+	 * support the configuration we're being given */
+	switch (*delay_on) {
+	case 1000:
+		led->blink_time = 0;
+		break;
+	case 250:
+		led->blink_time = 1;
+		break;
+	case 125:
+		led->blink_time = 2;
+		break;
+	case 62:
+	case 63:
+		/* Actually 62.5ms */
+		led->blink_time = 3;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret == 0) {
+		switch (*delay_off / *delay_on) {
+		case 1:
+			led->blink_cyc = 0;
+			break;
+		case 3:
+			led->blink_cyc = 1;
+			break;
+		case 4:
+			led->blink_cyc = 2;
+			break;
+		case 8:
+			led->blink_cyc = 3;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+	}
+
+	if (ret == 0)
+		led->blink = 1;
+	else
+		led->blink = 0;
+
+	/* Always update; if we fail turn off blinking since we expect
+	 * a software fallback. */
+	schedule_work(&led->work);
+
+	spin_unlock_irqrestore(&led->value_lock, flags);
+
+	return ret;
+}
+
+static const char *led_src_texts[] = {
+	"otp",
+	"power",
+	"charger",
+	"soft",
+};
+
+static ssize_t wm831x_status_src_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	int i;
+	ssize_t ret = 0;
+
+	mutex_lock(&led->mutex);
+
+	for (i = 0; i < ARRAY_SIZE(led_src_texts); i++)
+		if (i == led->src)
+			ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]);
+		else
+			ret += sprintf(&buf[ret], "%s ", led_src_texts[i]);
+
+	mutex_unlock(&led->mutex);
+
+	ret += sprintf(&buf[ret], "\n");
+
+	return ret;
+}
+
+static ssize_t wm831x_status_src_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	char name[20];
+	int i;
+	size_t len;
+
+	name[sizeof(name) - 1] = '\0';
+	strncpy(name, buf, sizeof(name) - 1);
+	len = strlen(name);
+
+	if (len && name[len - 1] == '\n')
+		name[len - 1] = '\0';
+
+	for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) {
+		if (!strcmp(name, led_src_texts[i])) {
+			mutex_lock(&led->mutex);
+
+			led->src = i;
+			schedule_work(&led->work);
+
+			mutex_unlock(&led->mutex);
+		}
+	}
+
+	return size;
+}
+
+static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store);
+
+static int wm831x_status_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *chip_pdata;
+	struct wm831x_status_pdata pdata;
+	struct wm831x_status *drvdata;
+	struct resource *res;
+	int id = pdev->id % ARRAY_SIZE(chip_pdata->status);
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+	dev_set_drvdata(&pdev->dev, drvdata);
+
+	drvdata->wm831x = wm831x;
+	drvdata->reg = res->start;
+
+	if (wm831x->dev->platform_data)
+		chip_pdata = wm831x->dev->platform_data;
+	else
+		chip_pdata = NULL;
+
+	memset(&pdata, 0, sizeof(pdata));
+	if (chip_pdata && chip_pdata->status[id])
+		memcpy(&pdata, chip_pdata->status[id], sizeof(pdata));
+	else
+		pdata.name = dev_name(&pdev->dev);
+
+	mutex_init(&drvdata->mutex);
+	INIT_WORK(&drvdata->work, wm831x_status_work);
+	spin_lock_init(&drvdata->value_lock);
+
+	/* We cache the configuration register and read startup values
+	 * from it. */
+	drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg);
+
+	if (drvdata->reg_val & WM831X_LED_MODE_MASK)
+		drvdata->brightness = LED_FULL;
+	else
+		drvdata->brightness = LED_OFF;
+
+	/* Set a default source if configured, otherwise leave the
+	 * current hardware setting.
+	 */
+	if (pdata.default_src == WM831X_STATUS_PRESERVE) {
+		drvdata->src = drvdata->reg_val;
+		drvdata->src &= WM831X_LED_SRC_MASK;
+		drvdata->src >>= WM831X_LED_SRC_SHIFT;
+	} else {
+		drvdata->src = pdata.default_src - 1;
+	}
+
+	drvdata->cdev.name = pdata.name;
+	drvdata->cdev.default_trigger = pdata.default_trigger;
+	drvdata->cdev.brightness_set = wm831x_status_set;
+	drvdata->cdev.blink_set = wm831x_status_blink_set;
+
+	ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
+		goto err_led;
+	}
+
+	ret = device_create_file(drvdata->cdev.dev, &dev_attr_src);
+	if (ret != 0)
+		dev_err(&pdev->dev,
+			"No source control for LED: %d\n", ret);
+
+	return 0;
+
+err_led:
+	led_classdev_unregister(&drvdata->cdev);
+	kfree(drvdata);
+err:
+	return ret;
+}
+
+static int wm831x_status_remove(struct platform_device *pdev)
+{
+	struct wm831x_status *drvdata = platform_get_drvdata(pdev);
+
+	device_remove_file(drvdata->cdev.dev, &dev_attr_src);
+	led_classdev_unregister(&drvdata->cdev);
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_status_driver = {
+	.driver = {
+		   .name = "wm831x-status",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = wm831x_status_probe,
+	.remove = wm831x_status_remove,
+};
+
+static int __devinit wm831x_status_init(void)
+{
+	return platform_driver_register(&wm831x_status_driver);
+}
+module_init(wm831x_status_init);
+
+static void wm831x_status_exit(void)
+{
+	platform_driver_unregister(&wm831x_status_driver);
+}
+module_exit(wm831x_status_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x status LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-status");
diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c
index 1bc5db4..f591337 100644
--- a/drivers/leds/ledtrig-gpio.c
+++ b/drivers/leds/ledtrig-gpio.c
@@ -44,22 +44,22 @@
 			struct gpio_trig_data, work);
 	int tmp;
 
-       if (!gpio_data->gpio)
-	       return;
+	if (!gpio_data->gpio)
+		return;
 
-       tmp = gpio_get_value(gpio_data->gpio);
-       if (gpio_data->inverted)
-	       tmp = !tmp;
+	tmp = gpio_get_value(gpio_data->gpio);
+	if (gpio_data->inverted)
+		tmp = !tmp;
 
-       if (tmp) {
-               if (gpio_data->desired_brightness)
-                       led_set_brightness(gpio_data->led,
-                                       gpio_data->desired_brightness);
-               else
-                       led_set_brightness(gpio_data->led, LED_FULL);
-       } else {
-               led_set_brightness(gpio_data->led, LED_OFF);
-       }
+	if (tmp) {
+		if (gpio_data->desired_brightness)
+			led_set_brightness(gpio_data->led,
+					   gpio_data->desired_brightness);
+		else
+			led_set_brightness(gpio_data->led, LED_FULL);
+	} else {
+		led_set_brightness(gpio_data->led, LED_OFF);
+	}
 }
 
 static ssize_t gpio_trig_brightness_show(struct device *dev,
diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c
index 55ad956..d242976 100644
--- a/drivers/macintosh/via-pmu-led.c
+++ b/drivers/macintosh/via-pmu-led.c
@@ -72,7 +72,7 @@
 }
 
 static struct led_classdev pmu_led = {
-	.name = "pmu-front-led",
+	.name = "pmu-led::front",
 #ifdef CONFIG_ADB_PMU_LED_IDE
 	.default_trigger = "ide-disk",
 #endif
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 657c481..10230cb 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1325,7 +1325,7 @@
 	mutex_unlock(&sbuf->cam->s_mutex);
 }
 
-static struct vm_operations_struct cafe_v4l_vm_ops = {
+static const struct vm_operations_struct cafe_v4l_vm_ops = {
 	.open = cafe_v4l_vm_open,
 	.close = cafe_v4l_vm_close
 };
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 74092f4..88987a5 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -1496,7 +1496,7 @@
 }
 
 
-static struct vm_operations_struct et61x251_vm_ops = {
+static const struct vm_operations_struct et61x251_vm_ops = {
 	.open = et61x251_vm_open,
 	.close = et61x251_vm_close,
 };
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index cf6540d..23d3fb7 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -99,7 +99,7 @@
 		frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_MAPPED;
 }
 
-static struct vm_operations_struct gspca_vm_ops = {
+static const struct vm_operations_struct gspca_vm_ops = {
 	.open		= gspca_vm_open,
 	.close		= gspca_vm_close,
 };
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index d0765be..4b1bc05 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1589,7 +1589,7 @@
 	meye.vma_use_count[idx]--;
 }
 
-static struct vm_operations_struct meye_vm_ops = {
+static const struct vm_operations_struct meye_vm_ops = {
 	.open		= meye_vm_open,
 	.close		= meye_vm_close,
 };
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 5ab7c5a..65ac474 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -404,7 +404,7 @@
 		 "SuperH Mobile CEU driver attached to camera %d\n",
 		 icd->devnum);
 
-	clk_enable(pcdev->clk);
+	pm_runtime_get_sync(ici->v4l2_dev.dev);
 
 	ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
 	while (ceu_read(pcdev, CSTSR) & 1)
@@ -438,7 +438,7 @@
 	}
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
-	clk_disable(pcdev->clk);
+	pm_runtime_put_sync(ici->v4l2_dev.dev);
 
 	dev_info(icd->dev.parent,
 		 "SuperH Mobile CEU driver detached from camera %d\n",
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 9d84c94..4a7711c 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -2077,7 +2077,7 @@
 }
 
 
-static struct vm_operations_struct sn9c102_vm_ops = {
+static const struct vm_operations_struct sn9c102_vm_ops = {
 	.open = sn9c102_vm_open,
 	.close = sn9c102_vm_close,
 };
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 0b996ea..6b41865 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -790,7 +790,7 @@
 	if (sbuf->mapcount == 0)
 		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED;
 }
-static struct vm_operations_struct stk_v4l_vm_ops = {
+static const struct vm_operations_struct stk_v4l_vm_ops = {
 	.open = stk_v4l_vm_open,
 	.close = stk_v4l_vm_close
 };
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 9e73515..a2bdd80 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -1069,7 +1069,7 @@
 	buffer->vma_use_count--;
 }
 
-static struct vm_operations_struct uvc_vm_ops = {
+static const struct vm_operations_struct uvc_vm_ops = {
 	.open		= uvc_vm_open,
 	.close		= uvc_vm_close,
 };
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index d09ce83..635ffc7 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -105,7 +105,7 @@
 	}
 }
 
-static struct vm_operations_struct videobuf_vm_ops = {
+static const struct vm_operations_struct videobuf_vm_ops = {
 	.open     = videobuf_vm_open,
 	.close    = videobuf_vm_close,
 };
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index a8dd22a..53cdd67 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -394,7 +394,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct videobuf_vm_ops =
+static const struct vm_operations_struct videobuf_vm_ops =
 {
 	.open     = videobuf_vm_open,
 	.close    = videobuf_vm_close,
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
index 30ae30f..35f3900 100644
--- a/drivers/media/video/videobuf-vmalloc.c
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -116,7 +116,7 @@
 	return;
 }
 
-static struct vm_operations_struct videobuf_vm_ops =
+static const struct vm_operations_struct videobuf_vm_ops =
 {
 	.open     = videobuf_vm_open,
 	.close    = videobuf_vm_close,
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index cd6a344..b034a81 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -3857,7 +3857,7 @@
 	dprintk("vino_vm_close(): count = %d\n", fb->map_count);
 }
 
-static struct vm_operations_struct vino_vm_ops = {
+static const struct vm_operations_struct vino_vm_ops = {
 	.open	= vino_vm_open,
 	.close	= vino_vm_close,
 };
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index b3c6436..312a713 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -935,7 +935,7 @@
 }
 
 
-static struct vm_operations_struct zc0301_vm_ops = {
+static const struct vm_operations_struct zc0301_vm_ops = {
 	.open = zc0301_vm_open,
 	.close = zc0301_vm_close,
 };
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index bcdefb1..47137de 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -3172,7 +3172,7 @@
 	mutex_unlock(&zr->resource_lock);
 }
 
-static struct vm_operations_struct zoran_vm_ops = {
+static const struct vm_operations_struct zoran_vm_ops = {
 	.open = zoran_vm_open,
 	.close = zoran_vm_close,
 };
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index aed6098..300e7ba 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -438,7 +438,7 @@
 	.fops		= &gru_fops,
 };
 
-struct vm_operations_struct gru_vm_ops = {
+const struct vm_operations_struct gru_vm_ops = {
 	.close		= gru_vma_close,
 	.fault		= gru_fault,
 };
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 34ab3d4..46990bc 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -624,7 +624,7 @@
  */
 struct gru_unload_context_req;
 
-extern struct vm_operations_struct gru_vm_ops;
+extern const struct vm_operations_struct gru_vm_ops;
 extern struct device *grudev;
 
 extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 8741d0f..3d1e532 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -22,12 +22,13 @@
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
 #include <linux/gpio.h>
+#include <linux/amba/mmci.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/mach/mmc.h>
 
 #include "mmci.h"
 
@@ -38,6 +39,36 @@
 
 static unsigned int fmax = 515633;
 
+/*
+ * This must be called with host->lock held
+ */
+static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
+{
+	u32 clk = 0;
+
+	if (desired) {
+		if (desired >= host->mclk) {
+			clk = MCI_CLK_BYPASS;
+			host->cclk = host->mclk;
+		} else {
+			clk = host->mclk / (2 * desired) - 1;
+			if (clk >= 256)
+				clk = 255;
+			host->cclk = host->mclk / (2 * (clk + 1));
+		}
+		if (host->hw_designer == 0x80)
+			clk |= MCI_FCEN; /* Bug fix in ST IP block */
+		clk |= MCI_CLK_ENABLE;
+		/* This hasn't proven to be worthwhile */
+		/* clk |= MCI_CLK_PWRSAVE; */
+	}
+
+	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
+		clk |= MCI_WIDE_BUS;
+
+	writel(clk, host->base + MMCICLOCK);
+}
+
 static void
 mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
 {
@@ -419,30 +450,31 @@
 static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct mmci_host *host = mmc_priv(mmc);
-	u32 clk = 0, pwr = 0;
-
-	if (ios->clock) {
-		if (ios->clock >= host->mclk) {
-			clk = MCI_CLK_BYPASS;
-			host->cclk = host->mclk;
-		} else {
-			clk = host->mclk / (2 * ios->clock) - 1;
-			if (clk >= 256)
-				clk = 255;
-			host->cclk = host->mclk / (2 * (clk + 1));
-		}
-		if (host->hw_designer == AMBA_VENDOR_ST)
-			clk |= MCI_FCEN; /* Bug fix in ST IP block */
-		clk |= MCI_CLK_ENABLE;
-	}
-
-	if (host->plat->translate_vdd)
-		pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+	u32 pwr = 0;
+	unsigned long flags;
 
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF:
+		if(host->vcc &&
+		   regulator_is_enabled(host->vcc))
+			regulator_disable(host->vcc);
 		break;
 	case MMC_POWER_UP:
+#ifdef CONFIG_REGULATOR
+		if (host->vcc)
+			/* This implicitly enables the regulator */
+			mmc_regulator_set_ocr(host->vcc, ios->vdd);
+#endif
+		/*
+		 * The translate_vdd function is not used if you have
+		 * an external regulator, or your design is really weird.
+		 * Using it would mean sending in power control BOTH using
+		 * a regulator AND the 4 MMCIPWR bits. If we don't have
+		 * a regulator, we might have some other platform specific
+		 * power control behind this translate function.
+		 */
+		if (!host->vcc && host->plat->translate_vdd)
+			pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
 		/* The ST version does not have this, fall through to POWER_ON */
 		if (host->hw_designer != AMBA_VENDOR_ST) {
 			pwr |= MCI_PWR_UP;
@@ -465,12 +497,16 @@
 		}
 	}
 
-	writel(clk, host->base + MMCICLOCK);
+	spin_lock_irqsave(&host->lock, flags);
+
+	mmci_set_clkreg(host, ios->clock);
 
 	if (host->pwr != pwr) {
 		host->pwr = pwr;
 		writel(pwr, host->base + MMCIPOWER);
 	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static int mmci_get_ro(struct mmc_host *mmc)
@@ -517,7 +553,7 @@
 
 static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 {
-	struct mmc_platform_data *plat = dev->dev.platform_data;
+	struct mmci_platform_data *plat = dev->dev.platform_data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
 	int ret;
@@ -583,7 +619,30 @@
 	mmc->ops = &mmci_ops;
 	mmc->f_min = (host->mclk + 511) / 512;
 	mmc->f_max = min(host->mclk, fmax);
-	mmc->ocr_avail = plat->ocr_mask;
+#ifdef CONFIG_REGULATOR
+	/* If we're using the regulator framework, try to fetch a regulator */
+	host->vcc = regulator_get(&dev->dev, "vmmc");
+	if (IS_ERR(host->vcc))
+		host->vcc = NULL;
+	else {
+		int mask = mmc_regulator_get_ocrmask(host->vcc);
+
+		if (mask < 0)
+			dev_err(&dev->dev, "error getting OCR mask (%d)\n",
+				mask);
+		else {
+			host->mmc->ocr_avail = (u32) mask;
+			if (plat->ocr_mask)
+				dev_warn(&dev->dev,
+				 "Provided ocr_mask/setpower will not be used "
+				 "(using regulator instead)\n");
+		}
+	}
+#endif
+	/* Fall back to platform data if no regulator is found */
+	if (host->vcc == NULL)
+		mmc->ocr_avail = plat->ocr_mask;
+	mmc->caps = plat->capabilities;
 
 	/*
 	 * We can do SGIO
@@ -720,6 +779,10 @@
 		clk_disable(host->clk);
 		clk_put(host->clk);
 
+		if (regulator_is_enabled(host->vcc))
+			regulator_disable(host->vcc);
+		regulator_put(host->vcc);
+
 		mmc_free_host(mmc);
 
 		amba_release_regions(dev);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 839f264..1ceb9a9 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -161,7 +161,7 @@
 	unsigned int		mclk;
 	unsigned int		cclk;
 	u32			pwr;
-	struct mmc_platform_data *plat;
+	struct mmci_platform_data *plat;
 
 	u8			hw_designer;
 	u8			hw_revision:4;
@@ -175,6 +175,7 @@
 	struct scatterlist	*sg_ptr;
 	unsigned int		sg_off;
 	unsigned int		size;
+	struct regulator	*vcc;
 };
 
 static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index e55ac79..5e0b152 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -28,6 +28,7 @@
 #include <linux/mmc/host.h>
 #include <linux/io.h>
 #include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
 
 #include <asm/sizes.h>
 
@@ -96,10 +97,18 @@
 
 static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
 {
+	int on;
+
 #ifdef CONFIG_REGULATOR
 	if (host->vcc)
 		mmc_regulator_set_ocr(host->vcc, vdd);
 #endif
+	if (!host->vcc && host->pdata &&
+	    gpio_is_valid(host->pdata->gpio_power)) {
+		on = ((1 << vdd) & host->pdata->ocr_mask);
+		gpio_set_value(host->pdata->gpio_power,
+			       !!on ^ host->pdata->gpio_power_invert);
+	}
 	if (!host->vcc && host->pdata && host->pdata->setpower)
 		host->pdata->setpower(mmc_dev(host->mmc), vdd);
 }
@@ -421,6 +430,12 @@
 {
 	struct pxamci_host *host = mmc_priv(mmc);
 
+	if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
+		if (host->pdata->gpio_card_ro_invert)
+			return !gpio_get_value(host->pdata->gpio_card_ro);
+		else
+			return gpio_get_value(host->pdata->gpio_card_ro);
+	}
 	if (host->pdata && host->pdata->get_ro)
 		return !!host->pdata->get_ro(mmc_dev(mmc));
 	/*
@@ -534,7 +549,7 @@
 	struct mmc_host *mmc;
 	struct pxamci_host *host = NULL;
 	struct resource *r, *dmarx, *dmatx;
-	int ret, irq;
+	int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -661,13 +676,63 @@
 	}
 	host->dma_drcmrtx = dmatx->start;
 
+	if (host->pdata) {
+		gpio_cd = host->pdata->gpio_card_detect;
+		gpio_ro = host->pdata->gpio_card_ro;
+		gpio_power = host->pdata->gpio_power;
+	}
+	if (gpio_is_valid(gpio_power)) {
+		ret = gpio_request(gpio_power, "mmc card power");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
+			goto out;
+		}
+		gpio_direction_output(gpio_power,
+				      host->pdata->gpio_power_invert);
+	}
+	if (gpio_is_valid(gpio_ro)) {
+		ret = gpio_request(gpio_ro, "mmc card read only");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power);
+			goto err_gpio_ro;
+		}
+		gpio_direction_input(gpio_ro);
+	}
+	if (gpio_is_valid(gpio_cd)) {
+		ret = gpio_request(gpio_cd, "mmc card detect");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power);
+			goto err_gpio_cd;
+		}
+		gpio_direction_input(gpio_cd);
+
+		ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  "mmc card detect", mmc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request card detect IRQ\n");
+			goto err_request_irq;
+		}
+	}
+
 	if (host->pdata && host->pdata->init)
 		host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
 
+	if (gpio_is_valid(gpio_power) && host->pdata->setpower)
+		dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n");
+	if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
+		dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n");
+
 	mmc_add_host(mmc);
 
 	return 0;
 
+err_request_irq:
+	gpio_free(gpio_cd);
+err_gpio_cd:
+	gpio_free(gpio_ro);
+err_gpio_ro:
+	gpio_free(gpio_power);
  out:
 	if (host) {
 		if (host->dma >= 0)
@@ -688,12 +753,26 @@
 static int pxamci_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	int gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
 
 	platform_set_drvdata(pdev, NULL);
 
 	if (mmc) {
 		struct pxamci_host *host = mmc_priv(mmc);
 
+		if (host->pdata) {
+			gpio_cd = host->pdata->gpio_card_detect;
+			gpio_ro = host->pdata->gpio_card_ro;
+			gpio_power = host->pdata->gpio_power;
+		}
+		if (gpio_is_valid(gpio_cd)) {
+			free_irq(gpio_to_irq(gpio_cd), mmc);
+			gpio_free(gpio_cd);
+		}
+		if (gpio_is_valid(gpio_ro))
+			gpio_free(gpio_ro);
+		if (gpio_is_valid(gpio_power))
+			gpio_free(gpio_power);
 		if (host->vcc)
 			regulator_put(host->vcc);
 
@@ -725,20 +804,20 @@
 }
 
 #ifdef CONFIG_PM
-static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
+static int pxamci_suspend(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (mmc)
-		ret = mmc_suspend_host(mmc, state);
+		ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
 
 	return ret;
 }
 
-static int pxamci_resume(struct platform_device *dev)
+static int pxamci_resume(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (mmc)
@@ -746,19 +825,22 @@
 
 	return ret;
 }
-#else
-#define pxamci_suspend	NULL
-#define pxamci_resume	NULL
+
+static struct dev_pm_ops pxamci_pm_ops = {
+	.suspend	= pxamci_suspend,
+	.resume		= pxamci_resume,
+};
 #endif
 
 static struct platform_driver pxamci_driver = {
 	.probe		= pxamci_probe,
 	.remove		= pxamci_remove,
-	.suspend	= pxamci_suspend,
-	.resume		= pxamci_resume,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pxamci_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 15c0195..a24be34 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -768,10 +768,24 @@
 
 	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
 
-	/* Renegotiate with link partner */
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
 	if (autoneg_normal) {
-	  data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-	data |= BMCR_ANENABLE | BMCR_ANRESTART;
+		/* Renegotiate with link partner */
+		data |= BMCR_ANENABLE | BMCR_ANRESTART;
+	} else {
+		/* Don't negotiate speed or duplex */
+		data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
+
+		/* Set speed and duplex static */
+		if (current_speed_selection == 10)
+			data &= ~BMCR_SPEED100;
+		else
+			data |= BMCR_SPEED100;
+
+		if (current_duplex != full)
+			data &= ~BMCR_FULLDPLX;
+		else
+			data |= BMCR_FULLDPLX;
 	}
 	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
 }
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 2fc30b4..cb90d64 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -66,7 +66,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c
index f4d13fc..b54d3b4 100644
--- a/drivers/net/irda/ks959-sir.c
+++ b/drivers/net/irda/ks959-sir.c
@@ -118,7 +118,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
index 5f9d733..8d713eb 100644
--- a/drivers/net/irda/ksdazzle-sir.c
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -82,7 +82,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index b3d30bc..c0e0bb9 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -50,7 +50,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 1445e58..84db145 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -17,6 +17,7 @@
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irmod.h>
@@ -163,6 +164,22 @@
 }
 
 /*
+ * Set the IrDA communications mode.
+ */
+static void pxa_irda_set_mode(struct pxa_irda *si, int mode)
+{
+	if (si->pdata->transceiver_mode)
+		si->pdata->transceiver_mode(si->dev, mode);
+	else {
+		if (gpio_is_valid(si->pdata->gpio_pwdown))
+			gpio_set_value(si->pdata->gpio_pwdown,
+					!(mode & IR_OFF) ^
+					!si->pdata->gpio_pwdown_inverted);
+		pxa2xx_transceiver_mode(si->dev, mode);
+	}
+}
+
+/*
  * Set the IrDA communications speed.
  */
 static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
@@ -188,7 +205,7 @@
 			pxa_irda_disable_clk(si);
 
 			/* set board transceiver to SIR mode */
-			si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+			pxa_irda_set_mode(si, IR_SIRMODE);
 
 			/* enable the STUART clock */
 			pxa_irda_enable_sirclk(si);
@@ -222,7 +239,7 @@
 		ICCR0 = 0;
 
 		/* set board transceiver to FIR mode */
-		si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
+		pxa_irda_set_mode(si, IR_FIRMODE);
 
 		/* enable the FICP clock */
 		pxa_irda_enable_firclk(si);
@@ -641,7 +658,7 @@
 	local_irq_restore(flags);
 
 	/* power off board transceiver */
-	si->pdata->transceiver_mode(si->dev, IR_OFF);
+	pxa_irda_set_mode(si, IR_OFF);
 
 	printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
 }
@@ -849,10 +866,26 @@
 	if (err)
 		goto err_mem_5;
 
-	if (si->pdata->startup)
+	if (gpio_is_valid(si->pdata->gpio_pwdown)) {
+		err = gpio_request(si->pdata->gpio_pwdown, "IrDA switch");
+		if (err)
+			goto err_startup;
+		err = gpio_direction_output(si->pdata->gpio_pwdown,
+					!si->pdata->gpio_pwdown_inverted);
+		if (err) {
+			gpio_free(si->pdata->gpio_pwdown);
+			goto err_startup;
+		}
+	}
+
+	if (si->pdata->startup) {
 		err = si->pdata->startup(si->dev);
-	if (err)
-		goto err_startup;
+		if (err)
+			goto err_startup;
+	}
+
+	if (gpio_is_valid(si->pdata->gpio_pwdown) && si->pdata->startup)
+		dev_warn(si->dev, "gpio_pwdown and startup() both defined!\n");
 
 	dev->netdev_ops = &pxa_irda_netdev_ops;
 
@@ -903,6 +936,8 @@
 	if (dev) {
 		struct pxa_irda *si = netdev_priv(dev);
 		unregister_netdev(dev);
+		if (gpio_is_valid(si->pdata->gpio_pwdown))
+			gpio_free(si->pdata->gpio_pwdown);
 		if (si->pdata->shutdown)
 			si->pdata->shutdown(si->dev);
 		kfree(si->tx_buff.head);
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index cee199c..3c16602 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -33,6 +33,7 @@
  */
 
 #include <linux/mlx4/cmd.h>
+#include <linux/cache.h>
 
 #include "fw.h"
 #include "icm.h"
@@ -698,6 +699,7 @@
 #define INIT_HCA_IN_SIZE		 0x200
 #define INIT_HCA_VERSION_OFFSET		 0x000
 #define	 INIT_HCA_VERSION		 2
+#define INIT_HCA_CACHELINE_SZ_OFFSET	 0x0e
 #define INIT_HCA_FLAGS_OFFSET		 0x014
 #define INIT_HCA_QPC_OFFSET		 0x020
 #define	 INIT_HCA_QPC_BASE_OFFSET	 (INIT_HCA_QPC_OFFSET + 0x10)
@@ -735,6 +737,9 @@
 
 	*((u8 *) mailbox->buf + INIT_HCA_VERSION_OFFSET) = INIT_HCA_VERSION;
 
+	*((u8 *) mailbox->buf + INIT_HCA_CACHELINE_SZ_OFFSET) =
+		(ilog2(cache_line_size()) - 4) << 5;
+
 #if defined(__LITTLE_ENDIAN)
 	*(inbox + INIT_HCA_FLAGS_OFFSET / 4) &= ~cpu_to_be32(1 << 1);
 #elif defined(__BIG_ENDIAN)
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index a9d926b..e7be66d 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -406,7 +406,6 @@
 			__func__, status);
 		return retval;
 	}
-	info->hardware_id.string[sizeof(info->hardware_id.length) - 1] = '\0';
 
 	if (info->current_status && (info->valid & ACPI_VALID_HID) &&
 			(!strcmp(info->hardware_id.string, IBM_HARDWARE_ID1) ||
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index fbf965b..17f38a7 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -192,6 +192,10 @@
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA
 
+config PCMCIA_BCM63XX
+	tristate "bcm63xx pcmcia support"
+	depends on BCM63XX && PCMCIA
+
 config PCMCIA_SA1100
 	tristate "SA1100 support"
 	depends on ARM && ARCH_SA1100 && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 047394d..a03a38a 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -27,6 +27,7 @@
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
 obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
+obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
 obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
@@ -71,6 +72,7 @@
 pxa2xx-obj-$(CONFIG_ARCH_VIPER)			+= pxa2xx_viper.o
 pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
+pxa2xx-obj-$(CONFIG_MACH_PALMTC)		+= pxa2xx_palmtc.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 9e1140f..e1dcced 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -363,7 +363,7 @@
 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
 	struct at91_cf_data	*board = cf->board;
 
-	pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	pcmcia_socket_dev_suspend(&pdev->dev);
 	if (device_may_wakeup(&pdev->dev)) {
 		enable_irq_wake(board->det_pin);
 		if (board->irq_pin)
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 9001334..0208870 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -515,7 +515,7 @@
 static int au1x00_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int au1x00_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c
new file mode 100644
index 0000000..bc88a3b
--- /dev/null
+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
@@ -0,0 +1,536 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include "bcm63xx_pcmcia.h"
+
+#define PFX	"bcm63xx_pcmcia: "
+
+#ifdef CONFIG_CARDBUS
+/* if cardbus is used, platform device needs reference to actual pci
+ * device */
+static struct pci_dev *bcm63xx_cb_dev;
+#endif
+
+/*
+ * read/write helper for pcmcia regs
+ */
+static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
+{
+	return bcm_readl(skt->base + off);
+}
+
+static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
+				 u32 val, u32 off)
+{
+	bcm_writel(val, skt->base + off);
+}
+
+/*
+ * This callback should (re-)initialise the socket, turn on status
+ * interrupts and PCMCIA bus, and wait for power to stabilise so that
+ * the card status signals report correctly.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
+{
+	return 0;
+}
+
+/*
+ * This callback should remove power on the socket, disable IRQs from
+ * the card, turn off status interrupts, and disable the PCMCIA bus.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
+{
+	return 0;
+}
+
+/*
+ * Implements the set_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetSocket in Card Services). We more or
+ * less punt all of this work and let the kernel handle the details
+ * of power configuration, reset, &c. We also record the value of
+ * `state' in order to regurgitate it to the PCMCIA core later.
+ */
+static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
+				     socket_state_t *state)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	unsigned long flags;
+	u32 val;
+
+	skt = sock->driver_data;
+
+	spin_lock_irqsave(&skt->lock, flags);
+
+	/* note: hardware cannot control socket power, so we will
+	 * always report SS_POWERON */
+
+	/* apply socket reset */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+	if (state->flags & SS_RESET)
+		val |= PCMCIA_C1_RESET_MASK;
+	else
+		val &= ~PCMCIA_C1_RESET_MASK;
+
+	/* reverse reset logic for cardbus card */
+	if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
+		val ^= PCMCIA_C1_RESET_MASK;
+
+	pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+	/* keep requested state for event reporting */
+	skt->requested_state = *state;
+
+	spin_unlock_irqrestore(&skt->lock, flags);
+
+	return 0;
+}
+
+/*
+ * identity cardtype from VS[12] input, CD[12] input while only VS2 is
+ * floating, and CD[12] input while only VS1 is floating
+ */
+enum {
+	IN_VS1 = (1 << 0),
+	IN_VS2 = (1 << 1),
+	IN_CD1_VS2H = (1 << 2),
+	IN_CD2_VS2H = (1 << 3),
+	IN_CD1_VS1H = (1 << 4),
+	IN_CD2_VS1H = (1 << 5),
+};
+
+static const u8 vscd_to_cardtype[] = {
+
+	/* VS1 float, VS2 float */
+	[IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
+
+	/* VS1 grounded, VS2 float */
+	[IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
+
+	/* VS1 grounded, VS2 grounded */
+	[0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
+
+	/* VS1 tied to CD1, VS2 float */
+	[IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
+
+	/* VS1 grounded, VS2 tied to CD2 */
+	[IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
+
+	/* VS1 tied to CD2, VS2 grounded */
+	[IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
+
+	/* VS1 float, VS2 grounded */
+	[IN_VS1] = (CARD_PCCARD | CARD_XV),
+
+	/* VS1 float, VS2 tied to CD2 */
+	[IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
+
+	/* VS1 float, VS2 tied to CD1 */
+	[IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
+
+	/* VS1 tied to CD2, VS2 float */
+	[IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
+
+	/* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
+	[IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
+};
+
+/*
+ * poll hardware to check card insertion status
+ */
+static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
+{
+	unsigned int stat;
+	u32 val;
+
+	stat = 0;
+
+	/* check CD for card presence */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+
+	if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
+		stat |= SS_DETECT;
+
+	/* if new insertion, detect cardtype */
+	if ((stat & SS_DETECT) && !skt->card_detected) {
+		unsigned int stat = 0;
+
+		/* float VS1, float VS2 */
+		val |= PCMCIA_C1_VS1OE_MASK;
+		val |= PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read VS[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
+		stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
+
+		/* drive VS1 low, float VS2 */
+		val &= ~PCMCIA_C1_VS1OE_MASK;
+		val |= PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read CD[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
+		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
+
+		/* float VS1, drive VS2 low */
+		val |= PCMCIA_C1_VS1OE_MASK;
+		val &= ~PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read CD[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
+		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
+
+		/* guess cardtype from all this */
+		skt->card_type = vscd_to_cardtype[stat];
+		if (!skt->card_type)
+			dev_err(&skt->socket.dev, "unsupported card type\n");
+
+		/* drive both VS pin to 0 again */
+		val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
+
+		/* enable correct logic */
+		val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
+		if (skt->card_type & CARD_PCCARD)
+			val |= PCMCIA_C1_EN_PCMCIA_MASK;
+		else
+			val |= PCMCIA_C1_EN_CARDBUS_MASK;
+
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+	}
+	skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
+
+	/* report card type/voltage */
+	if (skt->card_type & CARD_CARDBUS)
+		stat |= SS_CARDBUS;
+	if (skt->card_type & CARD_3V)
+		stat |= SS_3VCARD;
+	if (skt->card_type & CARD_XV)
+		stat |= SS_XVCARD;
+	stat |= SS_POWERON;
+
+	if (gpio_get_value(skt->pd->ready_gpio))
+		stat |= SS_READY;
+
+	return stat;
+}
+
+/*
+ * core request to get current socket status
+ */
+static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
+				     unsigned int *status)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+
+	skt = sock->driver_data;
+
+	spin_lock_bh(&skt->lock);
+	*status = __get_socket_status(skt);
+	spin_unlock_bh(&skt->lock);
+
+	return 0;
+}
+
+/*
+ * socket polling timer callback
+ */
+static void bcm63xx_pcmcia_poll(unsigned long data)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	unsigned int stat, events;
+
+	skt = (struct bcm63xx_pcmcia_socket *)data;
+
+	spin_lock_bh(&skt->lock);
+
+	stat = __get_socket_status(skt);
+
+	/* keep only changed bits, and mask with required one from the
+	 * core */
+	events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
+	skt->old_status = stat;
+	spin_unlock_bh(&skt->lock);
+
+	if (events)
+		pcmcia_parse_events(&skt->socket, events);
+
+	mod_timer(&skt->timer,
+		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+}
+
+static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
+				     struct pccard_io_map *map)
+{
+	/* this doesn't seem to be called by pcmcia layer if static
+	 * mapping is used */
+	return 0;
+}
+
+static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
+				      struct pccard_mem_map *map)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct resource *res;
+
+	skt = sock->driver_data;
+	if (map->flags & MAP_ATTRIB)
+		res = skt->attr_res;
+	else
+		res = skt->common_res;
+
+	map->static_start = res->start + map->card_start;
+	return 0;
+}
+
+static struct pccard_operations bcm63xx_pcmcia_operations = {
+	.init			= bcm63xx_pcmcia_sock_init,
+	.suspend		= bcm63xx_pcmcia_suspend,
+	.get_status		= bcm63xx_pcmcia_get_status,
+	.set_socket		= bcm63xx_pcmcia_set_socket,
+	.set_io_map		= bcm63xx_pcmcia_set_io_map,
+	.set_mem_map		= bcm63xx_pcmcia_set_mem_map,
+};
+
+/*
+ * register pcmcia socket to core
+ */
+static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct pcmcia_socket *sock;
+	struct resource *res, *irq_res;
+	unsigned int regmem_size = 0, iomem_size = 0;
+	u32 val;
+	int ret;
+
+	skt = kzalloc(sizeof(*skt), GFP_KERNEL);
+	if (!skt)
+		return -ENOMEM;
+	spin_lock_init(&skt->lock);
+	sock = &skt->socket;
+	sock->driver_data = skt;
+
+	/* make sure we have all resources we need */
+	skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	skt->pd = pdev->dev.platform_data;
+	if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* remap pcmcia registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regmem_size = resource_size(res);
+	if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
+		ret = -EINVAL;
+		goto err;
+	}
+	skt->reg_res = res;
+
+	skt->base = ioremap(res->start, regmem_size);
+	if (!skt->base) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* remap io registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+	iomem_size = resource_size(res);
+	skt->io_base = ioremap(res->start, iomem_size);
+	if (!skt->io_base) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* resources are static */
+	sock->resource_ops = &pccard_static_ops;
+	sock->ops = &bcm63xx_pcmcia_operations;
+	sock->owner = THIS_MODULE;
+	sock->dev.parent = &pdev->dev;
+	sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+	sock->io_offset = (unsigned long)skt->io_base;
+	sock->pci_irq = irq_res->start;
+
+#ifdef CONFIG_CARDBUS
+	sock->cb_dev = bcm63xx_cb_dev;
+	if (bcm63xx_cb_dev)
+		sock->features |= SS_CAP_CARDBUS;
+#endif
+
+	/* assume common & attribute memory have the same size */
+	sock->map_size = resource_size(skt->common_res);
+
+	/* initialize polling timer */
+	setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
+
+	/* initialize  pcmcia  control register,  drive  VS[12] to  0,
+	 * leave CB IDSEL to the old  value since it is set by the PCI
+	 * layer */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+	val &= PCMCIA_C1_CBIDSEL_MASK;
+	val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
+	pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+	/*
+	 * Hardware has only one set of timings registers, not one for
+	 * each memory access type, so we configure them for the
+	 * slowest one: attribute memory.
+	 */
+	val = PCMCIA_C2_DATA16_MASK;
+	val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
+	val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
+	val |= 3 << PCMCIA_C2_SETUP_SHIFT;
+	val |= 3 << PCMCIA_C2_HOLD_SHIFT;
+	pcmcia_writel(skt, val, PCMCIA_C2_REG);
+
+	ret = pcmcia_register_socket(sock);
+	if (ret)
+		goto err;
+
+	/* start polling socket */
+	mod_timer(&skt->timer,
+		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+
+	platform_set_drvdata(pdev, skt);
+	return 0;
+
+err:
+	if (skt->io_base)
+		iounmap(skt->io_base);
+	if (skt->base)
+		iounmap(skt->base);
+	if (skt->reg_res)
+		release_mem_region(skt->reg_res->start, regmem_size);
+	kfree(skt);
+	return ret;
+}
+
+static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct resource *res;
+
+	skt = platform_get_drvdata(pdev);
+	del_timer_sync(&skt->timer);
+	iounmap(skt->base);
+	iounmap(skt->io_base);
+	res = skt->reg_res;
+	release_mem_region(res->start, resource_size(res));
+	kfree(skt);
+	return 0;
+}
+
+struct platform_driver bcm63xx_pcmcia_driver = {
+	.probe	= bcm63xx_drv_pcmcia_probe,
+	.remove	= __devexit_p(bcm63xx_drv_pcmcia_remove),
+	.driver	= {
+		.name	= "bcm63xx_pcmcia",
+		.owner  = THIS_MODULE,
+	},
+};
+
+#ifdef CONFIG_CARDBUS
+static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	/* keep pci device */
+	bcm63xx_cb_dev = dev;
+	return platform_driver_register(&bcm63xx_pcmcia_driver);
+}
+
+static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
+{
+	platform_driver_unregister(&bcm63xx_pcmcia_driver);
+	bcm63xx_cb_dev = NULL;
+}
+
+static struct pci_device_id bcm63xx_cb_table[] = {
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= BCM6348_CPU_ID,
+		.subvendor	= PCI_VENDOR_ID_BROADCOM,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8,
+		.class_mask	= ~0,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= BCM6358_CPU_ID,
+		.subvendor	= PCI_VENDOR_ID_BROADCOM,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8,
+		.class_mask	= ~0,
+	},
+
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
+
+static struct pci_driver bcm63xx_cardbus_driver = {
+	.name		= "bcm63xx_cardbus",
+	.id_table	= bcm63xx_cb_table,
+	.probe		= bcm63xx_cb_probe,
+	.remove		= __devexit_p(bcm63xx_cb_exit),
+};
+#endif
+
+/*
+ * if cardbus support is enabled, register our platform device after
+ * our fake cardbus bridge has been registered
+ */
+static int __init bcm63xx_pcmcia_init(void)
+{
+#ifdef CONFIG_CARDBUS
+	return pci_register_driver(&bcm63xx_cardbus_driver);
+#else
+	return platform_driver_register(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+static void __exit bcm63xx_pcmcia_exit(void)
+{
+#ifdef CONFIG_CARDBUS
+	return pci_unregister_driver(&bcm63xx_cardbus_driver);
+#else
+	platform_driver_unregister(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+module_init(bcm63xx_pcmcia_init);
+module_exit(bcm63xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.h b/drivers/pcmcia/bcm63xx_pcmcia.h
new file mode 100644
index 0000000..ed95739
--- /dev/null
+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
@@ -0,0 +1,60 @@
+#ifndef BCM63XX_PCMCIA_H_
+#define BCM63XX_PCMCIA_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <pcmcia/ss.h>
+#include <bcm63xx_dev_pcmcia.h>
+
+/* socket polling rate in ms */
+#define BCM63XX_PCMCIA_POLL_RATE	500
+
+enum {
+	CARD_CARDBUS = (1 << 0),
+	CARD_PCCARD = (1 << 1),
+	CARD_5V = (1 << 2),
+	CARD_3V = (1 << 3),
+	CARD_XV = (1 << 4),
+	CARD_YV = (1 << 5),
+};
+
+struct bcm63xx_pcmcia_socket {
+	struct pcmcia_socket socket;
+
+	/* platform specific data */
+	struct bcm63xx_pcmcia_platform_data *pd;
+
+	/* all regs access are protected by this spinlock */
+	spinlock_t lock;
+
+	/* pcmcia registers resource */
+	struct resource *reg_res;
+
+	/* base remapped address of registers */
+	void __iomem *base;
+
+	/* whether a card is detected at the moment */
+	int card_detected;
+
+	/* type of detected card (mask of above enum) */
+	u8 card_type;
+
+	/* keep last socket status to implement event reporting */
+	unsigned int old_status;
+
+	/* backup of requested socket state */
+	socket_state_t requested_state;
+
+	/* timer used for socket status polling */
+	struct timer_list timer;
+
+	/* attribute/common memory resources */
+	struct resource *attr_res;
+	struct resource *common_res;
+	struct resource *io_res;
+
+	/* base address of io memory */
+	void __iomem *io_base;
+};
+
+#endif /* BCM63XX_PCMCIA_H_ */
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index b59d411..300b368 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -302,7 +302,7 @@
 
 static int bfin_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int bfin_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 0660ad1..934d4be 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -101,7 +101,7 @@
 static int socket_resume(struct pcmcia_socket *skt);
 static int socket_suspend(struct pcmcia_socket *skt);
 
-int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state)
+int pcmcia_socket_dev_suspend(struct device *dev)
 {
 	struct pcmcia_socket *socket;
 
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 46561fa..a04f21c 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -42,7 +42,7 @@
 #ifdef CONFIG_PM
 static int i82092aa_socket_suspend (struct pci_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int i82092aa_socket_resume (struct pci_dev *dev)
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 40d4953..b906abe 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1241,7 +1241,7 @@
 static int i82365_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int i82365_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 62b4ecc..d1d89c4 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -699,7 +699,7 @@
 static int cfc_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int cfc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 12034b4..a065583 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -675,7 +675,7 @@
 static int pcc_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pcc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index d1ad096..c69f2c4 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1296,7 +1296,7 @@
 #ifdef CONFIG_PM
 static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, state);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int m8xx_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f373639..68570bc 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -334,7 +334,7 @@
 
 static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int omap_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 8bed1da..1c39d34 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -758,7 +758,7 @@
 #ifdef CONFIG_PM
 static int pd6729_socket_suspend(struct pci_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pd6729_socket_resume(struct pci_dev *dev)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index c49a726..0e35acb 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -300,25 +300,29 @@
 	return soc_common_drv_pcmcia_remove(&dev->dev);
 }
 
-static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_drv_pcmcia_suspend(struct device *dev)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(dev);
 }
 
-static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
 {
-	pxa2xx_configure_sockets(&dev->dev);
-	return pcmcia_socket_dev_resume(&dev->dev);
+	pxa2xx_configure_sockets(dev);
+	return pcmcia_socket_dev_resume(dev);
 }
 
+static struct dev_pm_ops  pxa2xx_drv_pcmcia_pm_ops = {
+	.suspend	= pxa2xx_drv_pcmcia_suspend,
+	.resume		= pxa2xx_drv_pcmcia_resume,
+};
+
 static struct platform_driver pxa2xx_pcmcia_driver = {
 	.probe		= pxa2xx_drv_pcmcia_probe,
 	.remove		= pxa2xx_drv_pcmcia_remove,
-	.suspend 	= pxa2xx_drv_pcmcia_suspend,
-	.resume 	= pxa2xx_drv_pcmcia_resume,
 	.driver		= {
 		.name	= "pxa2xx-pcmcia",
 		.owner	= THIS_MODULE,
+		.pm	= &pxa2xx_drv_pcmcia_pm_ops,
 	},
 };
 
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
new file mode 100644
index 0000000..3a8993e
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -0,0 +1,230 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmtc.c
+ *
+ * Driver for Palm Tungsten|C PCMCIA
+ *
+ * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <mach/palmtc.h>
+#include "soc_common.h"
+
+static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+	if (ret)
+		goto err4;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
+	if (ret)
+		goto err4;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	if (ret)
+		goto err5;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
+	if (ret)
+		goto err5;
+	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
+	if (ret)
+		goto err6;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
+	if (ret)
+		goto err6;
+	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+	if (ret)
+		goto err7;
+
+	skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+	return 0;
+
+err7:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+err6:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+err5:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+err4:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+err3:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+err2:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+err1:
+	return ret;
+}
+
+static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+}
+
+static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->detect = 1; /* always inserted */
+	state->ready  = !!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_READY);
+	state->bvd1   = 1;
+	state->bvd2   = 1;
+	state->wrprot = 0;
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int palmtc_wifi_powerdown(void)
+{
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+	mdelay(40);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+	return 0;
+}
+
+static int palmtc_wifi_powerup(void)
+{
+	int timeout = 50;
+
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
+	mdelay(50);
+
+	/* Power up the card, 1.8V first, after a while 3.3V */
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
+	mdelay(100);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
+
+	/* Wait till the card is ready */
+	while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
+		timeout) {
+		mdelay(1);
+		timeout--;
+	}
+
+	/* Power down the WiFi in case of error */
+	if (!timeout) {
+		palmtc_wifi_powerdown();
+		return 1;
+	}
+
+	/* Reset the card */
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	mdelay(20);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
+	mdelay(25);
+
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+
+	return 0;
+}
+
+static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	int ret = 1;
+
+	if (state->Vcc == 0)
+		ret = palmtc_wifi_powerdown();
+	else if (state->Vcc == 33)
+		ret = palmtc_wifi_powerup();
+
+	return ret;
+}
+
+static void palmtc_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmtc_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmtc_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 1,
+
+	.hw_init		= palmtc_pcmcia_hw_init,
+	.hw_shutdown		= palmtc_pcmcia_hw_shutdown,
+
+	.socket_state		= palmtc_pcmcia_socket_state,
+	.configure_socket	= palmtc_pcmcia_configure_socket,
+
+	.socket_init		= palmtc_pcmcia_socket_init,
+	.socket_suspend		= palmtc_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmtc_pcmcia_device;
+
+static int __init palmtc_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_palmtc())
+		return -ENODEV;
+
+	palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!palmtc_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
+					sizeof(palmtc_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(palmtc_pcmcia_device);
+
+	if (ret)
+		platform_device_put(palmtc_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit palmtc_pcmcia_exit(void)
+{
+	platform_device_unregister(palmtc_pcmcia_device);
+}
+
+module_init(palmtc_pcmcia_init);
+module_exit(palmtc_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+	    " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index d8da5ac..2d0e997 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -89,7 +89,7 @@
 static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int sa11x0_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 401052a2..4be4e17 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -159,7 +159,7 @@
 
 static int pcmcia_suspend(struct sa1111_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pcmcia_resume(struct sa1111_dev *dev)
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 8eb0423..582413f 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -366,7 +366,7 @@
 static int tcic_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int tcic_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index d4ad50d..c9fcbdc 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -707,7 +707,7 @@
 static int vrc4171_card_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int vrc4171_card_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index b459e87..abe0e44 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1225,60 +1225,71 @@
 }
 
 #ifdef CONFIG_PM
-static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state)
+static int yenta_dev_suspend_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
 	int ret;
 
-	ret = pcmcia_socket_dev_suspend(&dev->dev, state);
+	ret = pcmcia_socket_dev_suspend(dev);
 
-	if (socket) {
-		if (socket->type && socket->type->save_state)
-			socket->type->save_state(socket);
+	if (!socket)
+		return ret;
 
-		/* FIXME: pci_save_state needs to have a better interface */
-		pci_save_state(dev);
-		pci_read_config_dword(dev, 16*4, &socket->saved_state[0]);
-		pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
-		pci_disable_device(dev);
+	if (socket->type && socket->type->save_state)
+		socket->type->save_state(socket);
 
-		/*
-		 * Some laptops (IBM T22) do not like us putting the Cardbus
-		 * bridge into D3.  At a guess, some other laptop will
-		 * probably require this, so leave it commented out for now.
-		 */
-		/* pci_set_power_state(dev, 3); */
-	}
+	pci_save_state(pdev);
+	pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]);
+	pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
+	pci_disable_device(pdev);
+
+	/*
+	 * Some laptops (IBM T22) do not like us putting the Cardbus
+	 * bridge into D3.  At a guess, some other laptop will
+	 * probably require this, so leave it commented out for now.
+	 */
+	/* pci_set_power_state(dev, 3); */
 
 	return ret;
 }
 
-
-static int yenta_dev_resume (struct pci_dev *dev)
+static int yenta_dev_resume_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
+	int ret;
 
-	if (socket) {
-		int rc;
+	if (!socket)
+		return 0;
 
-		pci_set_power_state(dev, 0);
-		/* FIXME: pci_restore_state needs to have a better interface */
-		pci_restore_state(dev);
-		pci_write_config_dword(dev, 16*4, socket->saved_state[0]);
-		pci_write_config_dword(dev, 17*4, socket->saved_state[1]);
+	pci_write_config_dword(pdev, 16*4, socket->saved_state[0]);
+	pci_write_config_dword(pdev, 17*4, socket->saved_state[1]);
 
-		rc = pci_enable_device(dev);
-		if (rc)
-			return rc;
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
 
-		pci_set_master(dev);
+	pci_set_master(pdev);
 
-		if (socket->type && socket->type->restore_state)
-			socket->type->restore_state(socket);
-	}
+	if (socket->type && socket->type->restore_state)
+		socket->type->restore_state(socket);
 
-	return pcmcia_socket_dev_resume(&dev->dev);
+	return pcmcia_socket_dev_resume(dev);
 }
+
+static struct dev_pm_ops yenta_pm_ops = {
+	.suspend_noirq = yenta_dev_suspend_noirq,
+	.resume_noirq = yenta_dev_resume_noirq,
+	.freeze_noirq = yenta_dev_suspend_noirq,
+	.thaw_noirq = yenta_dev_resume_noirq,
+	.poweroff_noirq = yenta_dev_suspend_noirq,
+	.restore_noirq = yenta_dev_resume_noirq,
+};
+
+#define YENTA_PM_OPS	(&yenta_pm_ops)
+#else
+#define YENTA_PM_OPS	NULL
 #endif
 
 #define CB_ID(vend,dev,type)				\
@@ -1376,10 +1387,7 @@
 	.id_table	= yenta_table,
 	.probe		= yenta_probe,
 	.remove		= __devexit_p(yenta_close),
-#ifdef CONFIG_PM
-	.suspend	= yenta_dev_suspend,
-	.resume		= yenta_dev_resume,
-#endif
+	.driver.pm	= YENTA_PM_OPS,
 };
 
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index da3c08b..749e210 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -624,7 +624,7 @@
 	struct backlight_device *bd = eeepc_backlight_device;
 	if (bd) {
 		int old = bd->props.brightness;
-		bd->props.brightness = read_brightness(bd);
+		backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY);
 		return old;
 	}
 	return -1;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index f78d275..d93108d 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -22,7 +22,7 @@
  */
 
 #define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020400
+#define TPACPI_SYSFS_VERSION 0x020500
 
 /*
  *  Changelog:
@@ -145,6 +145,51 @@
 	TP_ACPI_WGSV_STATE_UWBPWR	= 0x0020, /* UWB radio enabled */
 };
 
+/* HKEY events */
+enum tpacpi_hkey_event_t {
+	/* Hotkey-related */
+	TP_HKEY_EV_HOTKEY_BASE		= 0x1001, /* first hotkey (FN+F1) */
+	TP_HKEY_EV_BRGHT_UP		= 0x1010, /* Brightness up */
+	TP_HKEY_EV_BRGHT_DOWN		= 0x1011, /* Brightness down */
+	TP_HKEY_EV_VOL_UP		= 0x1015, /* Volume up or unmute */
+	TP_HKEY_EV_VOL_DOWN		= 0x1016, /* Volume down or unmute */
+	TP_HKEY_EV_VOL_MUTE		= 0x1017, /* Mixer output mute */
+
+	/* Reasons for waking up from S3/S4 */
+	TP_HKEY_EV_WKUP_S3_UNDOCK	= 0x2304, /* undock requested, S3 */
+	TP_HKEY_EV_WKUP_S4_UNDOCK	= 0x2404, /* undock requested, S4 */
+	TP_HKEY_EV_WKUP_S3_BAYEJ	= 0x2305, /* bay ejection req, S3 */
+	TP_HKEY_EV_WKUP_S4_BAYEJ	= 0x2405, /* bay ejection req, S4 */
+	TP_HKEY_EV_WKUP_S3_BATLOW	= 0x2313, /* battery empty, S3 */
+	TP_HKEY_EV_WKUP_S4_BATLOW	= 0x2413, /* battery empty, S4 */
+
+	/* Auto-sleep after eject request */
+	TP_HKEY_EV_BAYEJ_ACK		= 0x3003, /* bay ejection complete */
+	TP_HKEY_EV_UNDOCK_ACK		= 0x4003, /* undock complete */
+
+	/* Misc bay events */
+	TP_HKEY_EV_OPTDRV_EJ		= 0x3006, /* opt. drive tray ejected */
+
+	/* User-interface events */
+	TP_HKEY_EV_LID_CLOSE		= 0x5001, /* laptop lid closed */
+	TP_HKEY_EV_LID_OPEN		= 0x5002, /* laptop lid opened */
+	TP_HKEY_EV_TABLET_TABLET	= 0x5009, /* tablet swivel up */
+	TP_HKEY_EV_TABLET_NOTEBOOK	= 0x500a, /* tablet swivel down */
+	TP_HKEY_EV_PEN_INSERTED		= 0x500b, /* tablet pen inserted */
+	TP_HKEY_EV_PEN_REMOVED		= 0x500c, /* tablet pen removed */
+	TP_HKEY_EV_BRGHT_CHANGED	= 0x5010, /* backlight control event */
+
+	/* Thermal events */
+	TP_HKEY_EV_ALARM_BAT_HOT	= 0x6011, /* battery too hot */
+	TP_HKEY_EV_ALARM_BAT_XHOT	= 0x6012, /* battery critically hot */
+	TP_HKEY_EV_ALARM_SENSOR_HOT	= 0x6021, /* sensor too hot */
+	TP_HKEY_EV_ALARM_SENSOR_XHOT	= 0x6022, /* sensor critically hot */
+	TP_HKEY_EV_THM_TABLE_CHANGED	= 0x6030, /* thermal table changed */
+
+	/* Misc */
+	TP_HKEY_EV_RFKILL_CHANGED	= 0x7000, /* rfkill switch changed */
+};
+
 /****************************************************************************
  * Main driver
  */
@@ -1848,6 +1893,27 @@
  * Hotkey subdriver
  */
 
+/*
+ * ThinkPad firmware event model
+ *
+ * The ThinkPad firmware has two main event interfaces: normal ACPI
+ * notifications (which follow the ACPI standard), and a private event
+ * interface.
+ *
+ * The private event interface also issues events for the hotkeys.  As
+ * the driver gained features, the event handling code ended up being
+ * built around the hotkey subdriver.  This will need to be refactored
+ * to a more formal event API eventually.
+ *
+ * Some "hotkeys" are actually supposed to be used as event reports,
+ * such as "brightness has changed", "volume has changed", depending on
+ * the ThinkPad model and how the firmware is operating.
+ *
+ * Unlike other classes, hotkey-class events have mask/unmask control on
+ * non-ancient firmware.  However, how it behaves changes a lot with the
+ * firmware model and version.
+ */
+
 enum {	/* hot key scan codes (derived from ACPI DSDT) */
 	TP_ACPI_HOTKEYSCAN_FNF1		= 0,
 	TP_ACPI_HOTKEYSCAN_FNF2,
@@ -1875,7 +1941,7 @@
 	TP_ACPI_HOTKEYSCAN_THINKPAD,
 };
 
-enum {	/* Keys available through NVRAM polling */
+enum {	/* Keys/events available through NVRAM polling */
 	TPACPI_HKEY_NVRAM_KNOWN_MASK = 0x00fb88c0U,
 	TPACPI_HKEY_NVRAM_GOOD_MASK  = 0x00fb8000U,
 };
@@ -1930,8 +1996,11 @@
 static struct mutex hotkey_thread_mutex;
 
 /*
- * Acquire mutex to write poller control variables.
- * Increment hotkey_config_change when changing them.
+ * Acquire mutex to write poller control variables as an
+ * atomic block.
+ *
+ * Increment hotkey_config_change when changing them if you
+ * want the kthread to forget old state.
  *
  * See HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
  */
@@ -1942,6 +2011,11 @@
  * hotkey poller control variables
  *
  * Must be atomic or readers will also need to acquire mutex
+ *
+ * HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
+ * should be used only when the changes need to be taken as
+ * a block, OR when one needs to force the kthread to forget
+ * old state.
  */
 static u32 hotkey_source_mask;		/* bit mask 0=ACPI,1=NVRAM */
 static unsigned int hotkey_poll_freq = 10; /* Hz */
@@ -1972,10 +2046,12 @@
 
 static int hotkey_autosleep_ack;
 
-static u32 hotkey_orig_mask;
-static u32 hotkey_all_mask;
-static u32 hotkey_reserved_mask;
-static u32 hotkey_mask;
+static u32 hotkey_orig_mask;		/* events the BIOS had enabled */
+static u32 hotkey_all_mask;		/* all events supported in fw */
+static u32 hotkey_reserved_mask;	/* events better left disabled */
+static u32 hotkey_driver_mask;		/* events needed by the driver */
+static u32 hotkey_user_mask;		/* events visible to userspace */
+static u32 hotkey_acpi_mask;		/* events enabled in firmware */
 
 static unsigned int hotkey_report_mode;
 
@@ -1983,6 +2059,9 @@
 
 static struct attribute_set *hotkey_dev_attributes;
 
+static void tpacpi_driver_event(const unsigned int hkey_event);
+static void hotkey_driver_event(const unsigned int scancode);
+
 /* HKEY.MHKG() return bits */
 #define TP_HOTKEY_TABLET_MASK (1 << 3)
 
@@ -2017,24 +2096,53 @@
 }
 
 /*
+ * Reads current event mask from firmware, and updates
+ * hotkey_acpi_mask accordingly.  Also resets any bits
+ * from hotkey_user_mask that are unavailable to be
+ * delivered (shadow requirement of the userspace ABI).
+ *
  * Call with hotkey_mutex held
  */
 static int hotkey_mask_get(void)
 {
-	u32 m = 0;
-
 	if (tp_features.hotkey_mask) {
+		u32 m = 0;
+
 		if (!acpi_evalf(hkey_handle, &m, "DHKN", "d"))
 			return -EIO;
+
+		hotkey_acpi_mask = m;
+	} else {
+		/* no mask support doesn't mean no event support... */
+		hotkey_acpi_mask = hotkey_all_mask;
 	}
-	HOTKEY_CONFIG_CRITICAL_START
-	hotkey_mask = m | (hotkey_source_mask & hotkey_mask);
-	HOTKEY_CONFIG_CRITICAL_END
+
+	/* sync userspace-visible mask */
+	hotkey_user_mask &= (hotkey_acpi_mask | hotkey_source_mask);
 
 	return 0;
 }
 
+void static hotkey_mask_warn_incomplete_mask(void)
+{
+	/* log only what the user can fix... */
+	const u32 wantedmask = hotkey_driver_mask &
+		~(hotkey_acpi_mask | hotkey_source_mask) &
+		(hotkey_all_mask | TPACPI_HKEY_NVRAM_KNOWN_MASK);
+
+	if (wantedmask)
+		printk(TPACPI_NOTICE
+			"required events 0x%08x not enabled!\n",
+			wantedmask);
+}
+
 /*
+ * Set the firmware mask when supported
+ *
+ * Also calls hotkey_mask_get to update hotkey_acpi_mask.
+ *
+ * NOTE: does not set bits in hotkey_user_mask, but may reset them.
+ *
  * Call with hotkey_mutex held
  */
 static int hotkey_mask_set(u32 mask)
@@ -2042,66 +2150,100 @@
 	int i;
 	int rc = 0;
 
-	if (tp_features.hotkey_mask) {
-		if (!tp_warned.hotkey_mask_ff &&
-		    (mask == 0xffff || mask == 0xffffff ||
-		     mask == 0xffffffff)) {
-			tp_warned.hotkey_mask_ff = 1;
-			printk(TPACPI_NOTICE
-			       "setting the hotkey mask to 0x%08x is likely "
-			       "not the best way to go about it\n", mask);
-			printk(TPACPI_NOTICE
-			       "please consider using the driver defaults, "
-			       "and refer to up-to-date thinkpad-acpi "
-			       "documentation\n");
-		}
+	const u32 fwmask = mask & ~hotkey_source_mask;
 
-		HOTKEY_CONFIG_CRITICAL_START
+	if (tp_features.hotkey_mask) {
 		for (i = 0; i < 32; i++) {
-			u32 m = 1 << i;
-			/* enable in firmware mask only keys not in NVRAM
-			 * mode, but enable the key in the cached hotkey_mask
-			 * regardless of mode, or the key will end up
-			 * disabled by hotkey_mask_get() */
 			if (!acpi_evalf(hkey_handle,
 					NULL, "MHKM", "vdd", i + 1,
-					!!((mask & ~hotkey_source_mask) & m))) {
+					!!(mask & (1 << i)))) {
 				rc = -EIO;
 				break;
-			} else {
-				hotkey_mask = (hotkey_mask & ~m) | (mask & m);
 			}
 		}
-		HOTKEY_CONFIG_CRITICAL_END
-
-		/* hotkey_mask_get must be called unconditionally below */
-		if (!hotkey_mask_get() && !rc &&
-		    (hotkey_mask & ~hotkey_source_mask) !=
-		     (mask & ~hotkey_source_mask)) {
-			printk(TPACPI_NOTICE
-			       "requested hot key mask 0x%08x, but "
-			       "firmware forced it to 0x%08x\n",
-			       mask, hotkey_mask);
-		}
-	} else {
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
-		HOTKEY_CONFIG_CRITICAL_START
-		hotkey_mask = mask & hotkey_source_mask;
-		HOTKEY_CONFIG_CRITICAL_END
-		hotkey_mask_get();
-		if (hotkey_mask != mask) {
-			printk(TPACPI_NOTICE
-			       "requested hot key mask 0x%08x, "
-			       "forced to 0x%08x (NVRAM poll mask is "
-			       "0x%08x): no firmware mask support\n",
-			       mask, hotkey_mask, hotkey_source_mask);
-		}
-#else
-		hotkey_mask_get();
-		rc = -ENXIO;
-#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
 	}
 
+	/*
+	 * We *must* make an inconditional call to hotkey_mask_get to
+	 * refresh hotkey_acpi_mask and update hotkey_user_mask
+	 *
+	 * Take the opportunity to also log when we cannot _enable_
+	 * a given event.
+	 */
+	if (!hotkey_mask_get() && !rc && (fwmask & ~hotkey_acpi_mask)) {
+		printk(TPACPI_NOTICE
+		       "asked for hotkey mask 0x%08x, but "
+		       "firmware forced it to 0x%08x\n",
+		       fwmask, hotkey_acpi_mask);
+	}
+
+	hotkey_mask_warn_incomplete_mask();
+
+	return rc;
+}
+
+/*
+ * Sets hotkey_user_mask and tries to set the firmware mask
+ *
+ * Call with hotkey_mutex held
+ */
+static int hotkey_user_mask_set(const u32 mask)
+{
+	int rc;
+
+	/* Give people a chance to notice they are doing something that
+	 * is bound to go boom on their users sooner or later */
+	if (!tp_warned.hotkey_mask_ff &&
+	    (mask == 0xffff || mask == 0xffffff ||
+	     mask == 0xffffffff)) {
+		tp_warned.hotkey_mask_ff = 1;
+		printk(TPACPI_NOTICE
+		       "setting the hotkey mask to 0x%08x is likely "
+		       "not the best way to go about it\n", mask);
+		printk(TPACPI_NOTICE
+		       "please consider using the driver defaults, "
+		       "and refer to up-to-date thinkpad-acpi "
+		       "documentation\n");
+	}
+
+	/* Try to enable what the user asked for, plus whatever we need.
+	 * this syncs everything but won't enable bits in hotkey_user_mask */
+	rc = hotkey_mask_set((mask | hotkey_driver_mask) & ~hotkey_source_mask);
+
+	/* Enable the available bits in hotkey_user_mask */
+	hotkey_user_mask = mask & (hotkey_acpi_mask | hotkey_source_mask);
+
+	return rc;
+}
+
+/*
+ * Sets the driver hotkey mask.
+ *
+ * Can be called even if the hotkey subdriver is inactive
+ */
+static int tpacpi_hotkey_driver_mask_set(const u32 mask)
+{
+	int rc;
+
+	/* Do the right thing if hotkey_init has not been called yet */
+	if (!tp_features.hotkey) {
+		hotkey_driver_mask = mask;
+		return 0;
+	}
+
+	mutex_lock(&hotkey_mutex);
+
+	HOTKEY_CONFIG_CRITICAL_START
+	hotkey_driver_mask = mask;
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+	hotkey_source_mask |= (mask & ~hotkey_all_mask);
+#endif
+	HOTKEY_CONFIG_CRITICAL_END
+
+	rc = hotkey_mask_set((hotkey_acpi_mask | hotkey_driver_mask) &
+							~hotkey_source_mask);
+	mutex_unlock(&hotkey_mutex);
+
 	return rc;
 }
 
@@ -2137,11 +2279,10 @@
 	}
 }
 
-static void tpacpi_input_send_key(unsigned int scancode)
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key(const unsigned int scancode)
 {
-	unsigned int keycode;
-
-	keycode = hotkey_keycode_map[scancode];
+	const unsigned int keycode = hotkey_keycode_map[scancode];
 
 	if (keycode != KEY_RESERVED) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
@@ -2162,19 +2303,28 @@
 	}
 }
 
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key_masked(const unsigned int scancode)
+{
+	hotkey_driver_event(scancode);
+	if (hotkey_user_mask & (1 << scancode))
+		tpacpi_input_send_key(scancode);
+}
+
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
 static struct tp_acpi_drv_struct ibm_hotkey_acpidriver;
 
+/* Do NOT call without validating scancode first */
 static void tpacpi_hotkey_send_key(unsigned int scancode)
 {
-	tpacpi_input_send_key(scancode);
+	tpacpi_input_send_key_masked(scancode);
 	if (hotkey_report_mode < 2) {
 		acpi_bus_generate_proc_event(ibm_hotkey_acpidriver.device,
-						0x80, 0x1001 + scancode);
+				0x80, TP_HKEY_EV_HOTKEY_BASE + scancode);
 	}
 }
 
-static void hotkey_read_nvram(struct tp_nvram_state *n, u32 m)
+static void hotkey_read_nvram(struct tp_nvram_state *n, const u32 m)
 {
 	u8 d;
 
@@ -2210,21 +2360,24 @@
 	}
 }
 
+static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
+					   struct tp_nvram_state *newn,
+					   const u32 event_mask)
+{
+
 #define TPACPI_COMPARE_KEY(__scancode, __member) \
 	do { \
-		if ((mask & (1 << __scancode)) && \
+		if ((event_mask & (1 << __scancode)) && \
 		    oldn->__member != newn->__member) \
-		tpacpi_hotkey_send_key(__scancode); \
+			tpacpi_hotkey_send_key(__scancode); \
 	} while (0)
 
 #define TPACPI_MAY_SEND_KEY(__scancode) \
-	do { if (mask & (1 << __scancode)) \
-		tpacpi_hotkey_send_key(__scancode); } while (0)
+	do { \
+		if (event_mask & (1 << __scancode)) \
+			tpacpi_hotkey_send_key(__scancode); \
+	} while (0)
 
-static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
-					   struct tp_nvram_state *newn,
-					   u32 mask)
-{
 	TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_THINKPAD, thinkpad_toggle);
 	TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNSPACE, zoom_toggle);
 	TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNF7, display_toggle);
@@ -2270,15 +2423,22 @@
 			}
 		}
 	}
-}
 
 #undef TPACPI_COMPARE_KEY
 #undef TPACPI_MAY_SEND_KEY
+}
 
+/*
+ * Polling driver
+ *
+ * We track all events in hotkey_source_mask all the time, since
+ * most of them are edge-based.  We only issue those requested by
+ * hotkey_user_mask or hotkey_driver_mask, though.
+ */
 static int hotkey_kthread(void *data)
 {
 	struct tp_nvram_state s[2];
-	u32 mask;
+	u32 poll_mask, event_mask;
 	unsigned int si, so;
 	unsigned long t;
 	unsigned int change_detector, must_reset;
@@ -2298,10 +2458,12 @@
 	/* Initial state for compares */
 	mutex_lock(&hotkey_thread_data_mutex);
 	change_detector = hotkey_config_change;
-	mask = hotkey_source_mask & hotkey_mask;
+	poll_mask = hotkey_source_mask;
+	event_mask = hotkey_source_mask &
+			(hotkey_driver_mask | hotkey_user_mask);
 	poll_freq = hotkey_poll_freq;
 	mutex_unlock(&hotkey_thread_data_mutex);
-	hotkey_read_nvram(&s[so], mask);
+	hotkey_read_nvram(&s[so], poll_mask);
 
 	while (!kthread_should_stop()) {
 		if (t == 0) {
@@ -2324,15 +2486,17 @@
 			t = 0;
 			change_detector = hotkey_config_change;
 		}
-		mask = hotkey_source_mask & hotkey_mask;
+		poll_mask = hotkey_source_mask;
+		event_mask = hotkey_source_mask &
+				(hotkey_driver_mask | hotkey_user_mask);
 		poll_freq = hotkey_poll_freq;
 		mutex_unlock(&hotkey_thread_data_mutex);
 
-		if (likely(mask)) {
-			hotkey_read_nvram(&s[si], mask);
+		if (likely(poll_mask)) {
+			hotkey_read_nvram(&s[si], poll_mask);
 			if (likely(si != so)) {
 				hotkey_compare_and_issue_event(&s[so], &s[si],
-								mask);
+								event_mask);
 			}
 		}
 
@@ -2364,10 +2528,12 @@
 /* call with hotkey_mutex held */
 static void hotkey_poll_setup(bool may_warn)
 {
-	u32 hotkeys_to_poll = hotkey_source_mask & hotkey_mask;
+	const u32 poll_driver_mask = hotkey_driver_mask & hotkey_source_mask;
+	const u32 poll_user_mask = hotkey_user_mask & hotkey_source_mask;
 
-	if (hotkeys_to_poll != 0 && hotkey_poll_freq > 0 &&
-	    (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) {
+	if (hotkey_poll_freq > 0 &&
+	    (poll_driver_mask ||
+	     (poll_user_mask && tpacpi_inputdev->users > 0))) {
 		if (!tpacpi_hotkey_task) {
 			tpacpi_hotkey_task = kthread_run(hotkey_kthread,
 					NULL, TPACPI_NVRAM_KTHREAD_NAME);
@@ -2380,12 +2546,13 @@
 		}
 	} else {
 		hotkey_poll_stop_sync();
-		if (may_warn && hotkeys_to_poll != 0 &&
+		if (may_warn && (poll_driver_mask || poll_user_mask) &&
 		    hotkey_poll_freq == 0) {
 			printk(TPACPI_NOTICE
-				"hot keys 0x%08x require polling, "
-				"which is currently disabled\n",
-				hotkeys_to_poll);
+				"hot keys 0x%08x and/or events 0x%08x "
+				"require polling, which is currently "
+				"disabled\n",
+				poll_user_mask, poll_driver_mask);
 		}
 	}
 }
@@ -2403,9 +2570,7 @@
 	if (!freq)
 		hotkey_poll_stop_sync();
 
-	HOTKEY_CONFIG_CRITICAL_START
 	hotkey_poll_freq = freq;
-	HOTKEY_CONFIG_CRITICAL_END
 }
 
 #else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
@@ -2440,7 +2605,8 @@
 static void hotkey_inputdev_close(struct input_dev *dev)
 {
 	/* disable hotkey polling when possible */
-	if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING)
+	if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING &&
+	    !(hotkey_source_mask & hotkey_driver_mask))
 		hotkey_poll_setup_safe(false);
 }
 
@@ -2488,15 +2654,7 @@
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int res;
-
-	if (mutex_lock_killable(&hotkey_mutex))
-		return -ERESTARTSYS;
-	res = hotkey_mask_get();
-	mutex_unlock(&hotkey_mutex);
-
-	return (res)?
-		res : snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_mask);
+	return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_user_mask);
 }
 
 static ssize_t hotkey_mask_store(struct device *dev,
@@ -2512,7 +2670,7 @@
 	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
-	res = hotkey_mask_set(t);
+	res = hotkey_user_mask_set(t);
 
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
 	hotkey_poll_setup(true);
@@ -2594,6 +2752,8 @@
 			    const char *buf, size_t count)
 {
 	unsigned long t;
+	u32 r_ev;
+	int rc;
 
 	if (parse_strtoul(buf, 0xffffffffUL, &t) ||
 		((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0))
@@ -2606,14 +2766,28 @@
 	hotkey_source_mask = t;
 	HOTKEY_CONFIG_CRITICAL_END
 
+	rc = hotkey_mask_set((hotkey_user_mask | hotkey_driver_mask) &
+			~hotkey_source_mask);
 	hotkey_poll_setup(true);
-	hotkey_mask_set(hotkey_mask);
+
+	/* check if events needed by the driver got disabled */
+	r_ev = hotkey_driver_mask & ~(hotkey_acpi_mask & hotkey_all_mask)
+		& ~hotkey_source_mask & TPACPI_HKEY_NVRAM_KNOWN_MASK;
 
 	mutex_unlock(&hotkey_mutex);
 
+	if (rc < 0)
+		printk(TPACPI_ERR "hotkey_source_mask: failed to update the"
+			"firmware event mask!\n");
+
+	if (r_ev)
+		printk(TPACPI_NOTICE "hotkey_source_mask: "
+			"some important events were disabled: "
+			"0x%04x\n", r_ev);
+
 	tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t);
 
-	return count;
+	return (rc < 0) ? rc : count;
 }
 
 static struct device_attribute dev_attr_hotkey_source_mask =
@@ -2731,9 +2905,8 @@
 
 static void hotkey_wakeup_reason_notify_change(void)
 {
-	if (tp_features.hotkey_mask)
-		sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
-			     "wakeup_reason");
+	sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+		     "wakeup_reason");
 }
 
 /* sysfs wakeup hotunplug_complete (pollable) -------------------------- */
@@ -2750,9 +2923,8 @@
 
 static void hotkey_wakeup_hotunplug_complete_notify_change(void)
 {
-	if (tp_features.hotkey_mask)
-		sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
-			     "wakeup_hotunplug_complete");
+	sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+		     "wakeup_hotunplug_complete");
 }
 
 /* --------------------------------------------------------------------- */
@@ -2760,27 +2932,19 @@
 static struct attribute *hotkey_attributes[] __initdata = {
 	&dev_attr_hotkey_enable.attr,
 	&dev_attr_hotkey_bios_enabled.attr,
+	&dev_attr_hotkey_bios_mask.attr,
 	&dev_attr_hotkey_report_mode.attr,
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+	&dev_attr_hotkey_wakeup_reason.attr,
+	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
 	&dev_attr_hotkey_mask.attr,
 	&dev_attr_hotkey_all_mask.attr,
 	&dev_attr_hotkey_recommended_mask.attr,
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
 	&dev_attr_hotkey_source_mask.attr,
 	&dev_attr_hotkey_poll_freq.attr,
 #endif
 };
 
-static struct attribute *hotkey_mask_attributes[] __initdata = {
-	&dev_attr_hotkey_bios_mask.attr,
-#ifndef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
-	&dev_attr_hotkey_mask.attr,
-	&dev_attr_hotkey_all_mask.attr,
-	&dev_attr_hotkey_recommended_mask.attr,
-#endif
-	&dev_attr_hotkey_wakeup_reason.attr,
-	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
-};
-
 /*
  * Sync both the hw and sw blocking state of all switches
  */
@@ -2843,16 +3007,16 @@
 
 	kfree(hotkey_keycode_map);
 
-	if (tp_features.hotkey) {
-		dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
-			   "restoring original hot key mask\n");
-		/* no short-circuit boolean operator below! */
-		if ((hotkey_mask_set(hotkey_orig_mask) |
-		     hotkey_status_set(false)) != 0)
-			printk(TPACPI_ERR
-			       "failed to restore hot key mask "
-			       "to BIOS defaults\n");
-	}
+	dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
+		   "restoring original HKEY status and mask\n");
+	/* yes, there is a bitwise or below, we want the
+	 * functions to be called even if one of them fail */
+	if (((tp_features.hotkey_mask &&
+	      hotkey_mask_set(hotkey_orig_mask)) |
+	     hotkey_status_set(false)) != 0)
+		printk(TPACPI_ERR
+		       "failed to restore hot key mask "
+		       "to BIOS defaults\n");
 }
 
 static void __init hotkey_unmap(const unsigned int scancode)
@@ -2864,6 +3028,35 @@
 	}
 }
 
+/*
+ * HKEY quirks:
+ *   TPACPI_HK_Q_INIMASK:	Supports FN+F3,FN+F4,FN+F12
+ */
+
+#define	TPACPI_HK_Q_INIMASK	0x0001
+
+static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
+	TPACPI_Q_IBM('I', 'H', TPACPI_HK_Q_INIMASK), /* 600E */
+	TPACPI_Q_IBM('I', 'N', TPACPI_HK_Q_INIMASK), /* 600E */
+	TPACPI_Q_IBM('I', 'D', TPACPI_HK_Q_INIMASK), /* 770, 770E, 770ED */
+	TPACPI_Q_IBM('I', 'W', TPACPI_HK_Q_INIMASK), /* A20m */
+	TPACPI_Q_IBM('I', 'V', TPACPI_HK_Q_INIMASK), /* A20p */
+	TPACPI_Q_IBM('1', '0', TPACPI_HK_Q_INIMASK), /* A21e, A22e */
+	TPACPI_Q_IBM('K', 'U', TPACPI_HK_Q_INIMASK), /* A21e */
+	TPACPI_Q_IBM('K', 'X', TPACPI_HK_Q_INIMASK), /* A21m, A22m */
+	TPACPI_Q_IBM('K', 'Y', TPACPI_HK_Q_INIMASK), /* A21p, A22p */
+	TPACPI_Q_IBM('1', 'B', TPACPI_HK_Q_INIMASK), /* A22e */
+	TPACPI_Q_IBM('1', '3', TPACPI_HK_Q_INIMASK), /* A22m */
+	TPACPI_Q_IBM('1', 'E', TPACPI_HK_Q_INIMASK), /* A30/p (0) */
+	TPACPI_Q_IBM('1', 'C', TPACPI_HK_Q_INIMASK), /* R30 */
+	TPACPI_Q_IBM('1', 'F', TPACPI_HK_Q_INIMASK), /* R31 */
+	TPACPI_Q_IBM('I', 'Y', TPACPI_HK_Q_INIMASK), /* T20 */
+	TPACPI_Q_IBM('K', 'Z', TPACPI_HK_Q_INIMASK), /* T21 */
+	TPACPI_Q_IBM('1', '6', TPACPI_HK_Q_INIMASK), /* T22 */
+	TPACPI_Q_IBM('I', 'Z', TPACPI_HK_Q_INIMASK), /* X20, X21 */
+	TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
+};
+
 static int __init hotkey_init(struct ibm_init_struct *iibm)
 {
 	/* Requirements for changing the default keymaps:
@@ -2906,9 +3099,7 @@
 		KEY_UNKNOWN,	/* 0x0D: FN+INSERT */
 		KEY_UNKNOWN,	/* 0x0E: FN+DELETE */
 
-		/* brightness: firmware always reacts to them, unless
-		 * X.org did some tricks in the radeon BIOS scratch
-		 * registers of *some* models */
+		/* brightness: firmware always reacts to them */
 		KEY_RESERVED,	/* 0x0F: FN+HOME (brightness up) */
 		KEY_RESERVED,	/* 0x10: FN+END (brightness down) */
 
@@ -2983,6 +3174,8 @@
 	int status;
 	int hkeyv;
 
+	unsigned long quirks;
+
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 			"initializing hotkey subdriver\n");
 
@@ -3008,9 +3201,16 @@
 	if (!tp_features.hotkey)
 		return 1;
 
+	quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable,
+				     ARRAY_SIZE(tpacpi_hotkey_qtable));
+
 	tpacpi_disable_brightness_delay();
 
-	hotkey_dev_attributes = create_attr_set(13, NULL);
+	/* MUST have enough space for all attributes to be added to
+	 * hotkey_dev_attributes */
+	hotkey_dev_attributes = create_attr_set(
+					ARRAY_SIZE(hotkey_attributes) + 2,
+					NULL);
 	if (!hotkey_dev_attributes)
 		return -ENOMEM;
 	res = add_many_to_attr_set(hotkey_dev_attributes,
@@ -3019,7 +3219,7 @@
 	if (res)
 		goto err_exit;
 
-	/* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+	/* mask not supported on 600e/x, 770e, 770x, A21e, A2xm/p,
 	   A30, R30, R31, T20-22, X20-21, X22-24.  Detected by checking
 	   for HKEY interface version 0x100 */
 	if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
@@ -3033,10 +3233,22 @@
 			 * MHKV 0x100 in A31, R40, R40e,
 			 * T4x, X31, and later
 			 */
-			tp_features.hotkey_mask = 1;
 			vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 				"firmware HKEY interface version: 0x%x\n",
 				hkeyv);
+
+			/* Paranoia check AND init hotkey_all_mask */
+			if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+					"MHKA", "qd")) {
+				printk(TPACPI_ERR
+				       "missing MHKA handler, "
+				       "please report this to %s\n",
+				       TPACPI_MAIL);
+				/* Fallback: pre-init for FN+F3,F4,F12 */
+				hotkey_all_mask = 0x080cU;
+			} else {
+				tp_features.hotkey_mask = 1;
+			}
 		}
 	}
 
@@ -3044,32 +3256,23 @@
 		"hotkey masks are %s\n",
 		str_supported(tp_features.hotkey_mask));
 
-	if (tp_features.hotkey_mask) {
-		if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
-				"MHKA", "qd")) {
-			printk(TPACPI_ERR
-			       "missing MHKA handler, "
-			       "please report this to %s\n",
-			       TPACPI_MAIL);
-			/* FN+F12, FN+F4, FN+F3 */
-			hotkey_all_mask = 0x080cU;
-		}
-	}
+	/* Init hotkey_all_mask if not initialized yet */
+	if (!tp_features.hotkey_mask && !hotkey_all_mask &&
+	    (quirks & TPACPI_HK_Q_INIMASK))
+		hotkey_all_mask = 0x080cU;  /* FN+F12, FN+F4, FN+F3 */
 
-	/* hotkey_source_mask *must* be zero for
-	 * the first hotkey_mask_get */
+	/* Init hotkey_acpi_mask and hotkey_orig_mask */
 	if (tp_features.hotkey_mask) {
+		/* hotkey_source_mask *must* be zero for
+		 * the first hotkey_mask_get to return hotkey_orig_mask */
 		res = hotkey_mask_get();
 		if (res)
 			goto err_exit;
 
-		hotkey_orig_mask = hotkey_mask;
-		res = add_many_to_attr_set(
-				hotkey_dev_attributes,
-				hotkey_mask_attributes,
-				ARRAY_SIZE(hotkey_mask_attributes));
-		if (res)
-			goto err_exit;
+		hotkey_orig_mask = hotkey_acpi_mask;
+	} else {
+		hotkey_orig_mask = hotkey_all_mask;
+		hotkey_acpi_mask = hotkey_all_mask;
 	}
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
@@ -3183,14 +3386,9 @@
 	}
 
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
-	if (tp_features.hotkey_mask) {
-		hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
-					& ~hotkey_all_mask
-					& ~hotkey_reserved_mask;
-	} else {
-		hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
-					& ~hotkey_reserved_mask;
-	}
+	hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+				& ~hotkey_all_mask
+				& ~hotkey_reserved_mask;
 
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 		    "hotkey source mask 0x%08x, polling freq %u\n",
@@ -3204,13 +3402,18 @@
 		hotkey_exit();
 		return res;
 	}
-	res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
-				& ~hotkey_reserved_mask)
-				| hotkey_orig_mask);
+	res = hotkey_mask_set(((hotkey_all_mask & ~hotkey_reserved_mask)
+			       | hotkey_driver_mask)
+			      & ~hotkey_source_mask);
 	if (res < 0 && res != -ENXIO) {
 		hotkey_exit();
 		return res;
 	}
+	hotkey_user_mask = (hotkey_acpi_mask | hotkey_source_mask)
+				& ~hotkey_reserved_mask;
+	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+		"initial masks: user=0x%08x, fw=0x%08x, poll=0x%08x\n",
+		hotkey_user_mask, hotkey_acpi_mask, hotkey_source_mask);
 
 	dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 			"legacy ibm/hotkey event reporting over procfs %s\n",
@@ -3245,7 +3448,7 @@
 	if (scancode > 0 && scancode < 0x21) {
 		scancode--;
 		if (!(hotkey_source_mask & (1 << scancode))) {
-			tpacpi_input_send_key(scancode);
+			tpacpi_input_send_key_masked(scancode);
 			*send_acpi_ev = false;
 		} else {
 			*ignore_acpi_ev = true;
@@ -3264,20 +3467,20 @@
 	*ignore_acpi_ev = false;
 
 	switch (hkey) {
-	case 0x2304: /* suspend, undock */
-	case 0x2404: /* hibernation, undock */
+	case TP_HKEY_EV_WKUP_S3_UNDOCK: /* suspend, undock */
+	case TP_HKEY_EV_WKUP_S4_UNDOCK: /* hibernation, undock */
 		hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
 		*ignore_acpi_ev = true;
 		break;
 
-	case 0x2305: /* suspend, bay eject */
-	case 0x2405: /* hibernation, bay eject */
+	case TP_HKEY_EV_WKUP_S3_BAYEJ: /* suspend, bay eject */
+	case TP_HKEY_EV_WKUP_S4_BAYEJ: /* hibernation, bay eject */
 		hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
 		*ignore_acpi_ev = true;
 		break;
 
-	case 0x2313: /* Battery on critical low level (S3) */
-	case 0x2413: /* Battery on critical low level (S4) */
+	case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */
+	case TP_HKEY_EV_WKUP_S4_BATLOW: /* Battery on critical low level/S4 */
 		printk(TPACPI_ALERT
 			"EMERGENCY WAKEUP: battery almost empty\n");
 		/* how to auto-heal: */
@@ -3307,21 +3510,21 @@
 	*ignore_acpi_ev = false;
 
 	switch (hkey) {
-	case 0x5010: /* Lenovo new BIOS: brightness changed */
-	case 0x500b: /* X61t: tablet pen inserted into bay */
-	case 0x500c: /* X61t: tablet pen removed from bay */
+	case TP_HKEY_EV_PEN_INSERTED:  /* X61t: tablet pen inserted into bay */
+	case TP_HKEY_EV_PEN_REMOVED:   /* X61t: tablet pen removed from bay */
 		return true;
 
-	case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
-	case 0x500a: /* X41t-X61t: swivel down (normal mode) */
+	case TP_HKEY_EV_TABLET_TABLET:   /* X41t-X61t: tablet mode */
+	case TP_HKEY_EV_TABLET_NOTEBOOK: /* X41t-X61t: normal mode */
 		tpacpi_input_send_tabletsw();
 		hotkey_tablet_mode_notify_change();
 		*send_acpi_ev = false;
 		return true;
 
-	case 0x5001:
-	case 0x5002:
-		/* LID switch events.  Do not propagate */
+	case TP_HKEY_EV_LID_CLOSE:	/* Lid closed */
+	case TP_HKEY_EV_LID_OPEN:	/* Lid opened */
+	case TP_HKEY_EV_BRGHT_CHANGED:	/* brightness changed */
+		/* do not propagate these events */
 		*ignore_acpi_ev = true;
 		return true;
 
@@ -3339,30 +3542,30 @@
 	*ignore_acpi_ev = false;
 
 	switch (hkey) {
-	case 0x6011:
+	case TP_HKEY_EV_ALARM_BAT_HOT:
 		printk(TPACPI_CRIT
 			"THERMAL ALARM: battery is too hot!\n");
 		/* recommended action: warn user through gui */
 		return true;
-	case 0x6012:
+	case TP_HKEY_EV_ALARM_BAT_XHOT:
 		printk(TPACPI_ALERT
 			"THERMAL EMERGENCY: battery is extremely hot!\n");
 		/* recommended action: immediate sleep/hibernate */
 		return true;
-	case 0x6021:
+	case TP_HKEY_EV_ALARM_SENSOR_HOT:
 		printk(TPACPI_CRIT
 			"THERMAL ALARM: "
 			"a sensor reports something is too hot!\n");
 		/* recommended action: warn user through gui, that */
 		/* some internal component is too hot */
 		return true;
-	case 0x6022:
+	case TP_HKEY_EV_ALARM_SENSOR_XHOT:
 		printk(TPACPI_ALERT
 			"THERMAL EMERGENCY: "
 			"a sensor reports something is extremely hot!\n");
 		/* recommended action: immediate sleep/hibernate */
 		return true;
-	case 0x6030:
+	case TP_HKEY_EV_THM_TABLE_CHANGED:
 		printk(TPACPI_INFO
 			"EC reports that Thermal Table has changed\n");
 		/* recommended action: do nothing, we don't have
@@ -3420,7 +3623,7 @@
 			break;
 		case 3:
 			/* 0x3000-0x3FFF: bay-related wakeups */
-			if (hkey == 0x3003) {
+			if (hkey == TP_HKEY_EV_BAYEJ_ACK) {
 				hotkey_autosleep_ack = 1;
 				printk(TPACPI_INFO
 				       "bay ejected\n");
@@ -3432,7 +3635,7 @@
 			break;
 		case 4:
 			/* 0x4000-0x4FFF: dock-related wakeups */
-			if (hkey == 0x4003) {
+			if (hkey == TP_HKEY_EV_UNDOCK_ACK) {
 				hotkey_autosleep_ack = 1;
 				printk(TPACPI_INFO
 				       "undocked\n");
@@ -3454,7 +3657,8 @@
 			break;
 		case 7:
 			/* 0x7000-0x7FFF: misc */
-			if (tp_features.hotkey_wlsw && hkey == 0x7000) {
+			if (tp_features.hotkey_wlsw &&
+					hkey == TP_HKEY_EV_RFKILL_CHANGED) {
 				tpacpi_send_radiosw_update();
 				send_acpi_ev = 0;
 				known_ev = true;
@@ -3500,10 +3704,12 @@
 {
 	tpacpi_disable_brightness_delay();
 
-	if (hotkey_mask_get())
+	if (hotkey_status_set(true) < 0 ||
+	    hotkey_mask_set(hotkey_acpi_mask) < 0)
 		printk(TPACPI_ERR
-		       "error while trying to read hot key mask "
-		       "from firmware\n");
+		       "error while attempting to reset the event "
+		       "firmware interface\n");
+
 	tpacpi_send_radiosw_update();
 	hotkey_tablet_mode_notify_change();
 	hotkey_wakeup_reason_notify_change();
@@ -3532,8 +3738,8 @@
 		return res;
 
 	len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
-	if (tp_features.hotkey_mask) {
-		len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_mask);
+	if (hotkey_all_mask) {
+		len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_user_mask);
 		len += sprintf(p + len,
 			       "commands:\tenable, disable, reset, <mask>\n");
 	} else {
@@ -3570,7 +3776,7 @@
 	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
-	mask = hotkey_mask;
+	mask = hotkey_user_mask;
 
 	res = 0;
 	while ((cmd = next_cmd(&buf))) {
@@ -3592,12 +3798,11 @@
 		}
 	}
 
-	if (!res)
+	if (!res) {
 		tpacpi_disclose_usertask("procfs hotkey",
 			"set mask to 0x%08x\n", mask);
-
-	if (!res && mask != hotkey_mask)
-		res = hotkey_mask_set(mask);
+		res = hotkey_user_mask_set(mask);
+	}
 
 errexit:
 	mutex_unlock(&hotkey_mutex);
@@ -6010,8 +6215,10 @@
 					TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
 					&ibm_backlight_data);
 	if (IS_ERR(ibm_backlight_device)) {
+		int rc = PTR_ERR(ibm_backlight_device);
+		ibm_backlight_device = NULL;
 		printk(TPACPI_ERR "Could not register backlight device\n");
-		return PTR_ERR(ibm_backlight_device);
+		return rc;
 	}
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
 			"brightness is supported\n");
@@ -7499,6 +7706,21 @@
  ****************************************************************************
  ****************************************************************************/
 
+/*
+ * HKEY event callout for other subdrivers go here
+ * (yes, it is ugly, but it is quick, safe, and gets the job done
+ */
+static void tpacpi_driver_event(const unsigned int hkey_event)
+{
+}
+
+
+
+static void hotkey_driver_event(const unsigned int scancode)
+{
+	tpacpi_driver_event(TP_HKEY_EV_HOTKEY_BASE + scancode);
+}
+
 /* sysfs name ---------------------------------------------------------- */
 static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev,
 			   struct device_attribute *attr,
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index c07fdb9..83b8b5a 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -153,6 +153,7 @@
 	acpi_handle temp = NULL;
 	acpi_status status;
 	struct pnp_dev *dev;
+	struct acpi_hardware_id *id;
 
 	/*
 	 * If a PnPacpi device is not present , the device
@@ -193,15 +194,12 @@
 	if (dev->capabilities & PNP_CONFIGURABLE)
 		pnpacpi_parse_resource_option_data(dev);
 
-	if (device->flags.compatible_ids) {
-		struct acpica_device_id_list *cid_list = device->pnp.cid_list;
-		int i;
-
-		for (i = 0; i < cid_list->count; i++) {
-			if (!ispnpidacpi(cid_list->ids[i].string))
-				continue;
-			pnp_add_id(dev, cid_list->ids[i].string);
-		}
+	list_for_each_entry(id, &device->pnp.ids, list) {
+		if (!strcmp(id->id, acpi_device_hid(device)))
+			continue;
+		if (!ispnpidacpi(id->id))
+			continue;
+		pnp_add_id(dev, id->id);
 	}
 
 	/* clear out the damaged flags */
@@ -232,9 +230,8 @@
 	struct pnp_dev *pnp = _pnp;
 
 	/* true means it matched */
-	return acpi->flags.hardware_id
-	    && !acpi_get_physical_device(acpi->handle)
-	    && compare_pnp_id(pnp->id, acpi->pnp.hardware_id);
+	return !acpi_get_physical_device(acpi->handle)
+	    && compare_pnp_id(pnp->id, acpi_device_hid(acpi));
 }
 
 static int __init acpi_pnp_find_device(struct device *dev, acpi_handle * handle)
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index bb8cc05..747ca19 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -438,34 +438,37 @@
 }
 
 #ifdef CONFIG_PM
-static int pxa_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa_rtc_suspend(struct device *dev)
 {
-	struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		enable_irq_wake(pxa_rtc->irq_Alrm);
 	return 0;
 }
 
-static int pxa_rtc_resume(struct platform_device *pdev)
+static int pxa_rtc_resume(struct device *dev)
 {
-	struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		disable_irq_wake(pxa_rtc->irq_Alrm);
 	return 0;
 }
-#else
-#define pxa_rtc_suspend	NULL
-#define pxa_rtc_resume	NULL
+
+static struct dev_pm_ops pxa_rtc_pm_ops = {
+	.suspend	= pxa_rtc_suspend,
+	.resume		= pxa_rtc_resume,
+};
 #endif
 
 static struct platform_driver pxa_rtc_driver = {
 	.remove		= __exit_p(pxa_rtc_remove),
-	.suspend	= pxa_rtc_suspend,
-	.resume		= pxa_rtc_resume,
 	.driver		= {
-		.name		= "pxa-rtc",
+		.name	= "pxa-rtc",
+#ifdef CONFIG_PM
+		.pm	= &pxa_rtc_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 021b292..29f98a7 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -393,31 +393,34 @@
 }
 
 #ifdef CONFIG_PM
-static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int sa1100_rtc_suspend(struct device *dev)
 {
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		enable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
 
-static int sa1100_rtc_resume(struct platform_device *pdev)
+static int sa1100_rtc_resume(struct device *dev)
 {
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		disable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
-#else
-#define sa1100_rtc_suspend	NULL
-#define sa1100_rtc_resume	NULL
+
+static struct dev_pm_ops sa1100_rtc_pm_ops = {
+	.suspend	= sa1100_rtc_suspend,
+	.resume		= sa1100_rtc_resume,
+};
 #endif
 
 static struct platform_driver sa1100_rtc_driver = {
 	.probe		= sa1100_rtc_probe,
 	.remove		= sa1100_rtc_remove,
-	.suspend	= sa1100_rtc_suspend,
-	.resume		= sa1100_rtc_resume,
 	.driver		= {
-		.name		= "sa1100-rtc",
+		.name	= "sa1100-rtc",
+#ifdef CONFIG_PM
+		.pm	= &sa1100_rtc_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 614b3a7..3441b3f 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -26,7 +26,6 @@
 #include <linux/completion.h>
 #include <linux/list.h>
 #include <scsi/scsi.h>
-#include <linux/kref.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/cdev.h>
 #include <net/netlink.h>
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 848b594..0cb049f 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1185,7 +1185,7 @@
 	return VM_FAULT_SIGBUS;
 }
 
-static struct vm_operations_struct sg_mmap_vm_ops = {
+static const struct vm_operations_struct sg_mmap_vm_ops = {
 	.fault = sg_vma_fault,
 };
 
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 03422ce..e707120 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1458,4 +1458,23 @@
 	---help---
 	Add support for UART controller on timberdale.
 
+config SERIAL_BCM63XX
+	tristate "bcm63xx serial port support"
+	select SERIAL_CORE
+	depends on BCM63XX
+	help
+	  If you have a bcm63xx CPU, you can enable its onboard
+	  serial port by enabling this options.
+
+          To compile this driver as a module, choose M here: the
+          module will be called bcm963xx_uart.
+
+config SERIAL_BCM63XX_CONSOLE
+	bool "Console on bcm63xx serial port"
+	depends on SERIAL_BCM63XX=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  If you have enabled the serial port on the bcm63xx CPU
+	  you can make it the console by answering Y to this option.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 97f6fcc..d21d5dd 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -34,6 +34,7 @@
 obj-$(CONFIG_SERIAL_PXA) += pxa.o
 obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
new file mode 100644
index 0000000..beddaa6
--- /dev/null
+++ b/drivers/serial/bcm63xx_uart.c
@@ -0,0 +1,890 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from many drivers using generic_serial interface.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ *
+ *  Serial driver for BCM63xx integrated UART.
+ *
+ * Hardware flow control was _not_ tested since I only have RX/TX on
+ * my board.
+ */
+
+#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <bcm63xx_clk.h>
+#include <bcm63xx_irq.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+#define BCM63XX_NR_UARTS	1
+
+static struct uart_port ports[BCM63XX_NR_UARTS];
+
+/*
+ * rx interrupt mask / stat
+ *
+ * mask:
+ *  - rx fifo full
+ *  - rx fifo above threshold
+ *  - rx fifo not empty for too long
+ */
+#define UART_RX_INT_MASK	(UART_IR_MASK(UART_IR_RXOVER) |		\
+				UART_IR_MASK(UART_IR_RXTHRESH) |	\
+				UART_IR_MASK(UART_IR_RXTIMEOUT))
+
+#define UART_RX_INT_STAT	(UART_IR_STAT(UART_IR_RXOVER) |		\
+				UART_IR_STAT(UART_IR_RXTHRESH) |	\
+				UART_IR_STAT(UART_IR_RXTIMEOUT))
+
+/*
+ * tx interrupt mask / stat
+ *
+ * mask:
+ * - tx fifo empty
+ * - tx fifo below threshold
+ */
+#define UART_TX_INT_MASK	(UART_IR_MASK(UART_IR_TXEMPTY) |	\
+				UART_IR_MASK(UART_IR_TXTRESH))
+
+#define UART_TX_INT_STAT	(UART_IR_STAT(UART_IR_TXEMPTY) |	\
+				UART_IR_STAT(UART_IR_TXTRESH))
+
+/*
+ * external input interrupt
+ *
+ * mask: any edge on CTS, DCD
+ */
+#define UART_EXTINP_INT_MASK	(UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
+				 UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
+
+/*
+ * handy uart register accessor
+ */
+static inline unsigned int bcm_uart_readl(struct uart_port *port,
+					 unsigned int offset)
+{
+	return bcm_readl(port->membase + offset);
+}
+
+static inline void bcm_uart_writel(struct uart_port *port,
+				  unsigned int value, unsigned int offset)
+{
+	bcm_writel(value, port->membase + offset);
+}
+
+/*
+ * serial core request to check if uart tx fifo is empty
+ */
+static unsigned int bcm_uart_tx_empty(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
+}
+
+/*
+ * serial core request to set RTS and DTR pin state and loopback mode
+ */
+static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
+	/* invert of written value is reflected on the pin */
+	if (!(mctrl & TIOCM_DTR))
+		val |= UART_MCTL_DTR_MASK;
+	if (!(mctrl & TIOCM_RTS))
+		val |= UART_MCTL_RTS_MASK;
+	bcm_uart_writel(port, val, UART_MCTL_REG);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	if (mctrl & TIOCM_LOOP)
+		val |= UART_CTL_LOOPBACK_MASK;
+	else
+		val &= ~UART_CTL_LOOPBACK_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to return RI, CTS, DCD and DSR pin state
+ */
+static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
+{
+	unsigned int val, mctrl;
+
+	mctrl = 0;
+	val = bcm_uart_readl(port, UART_EXTINP_REG);
+	if (val & UART_EXTINP_RI_MASK)
+		mctrl |= TIOCM_RI;
+	if (val & UART_EXTINP_CTS_MASK)
+		mctrl |= TIOCM_CTS;
+	if (val & UART_EXTINP_DCD_MASK)
+		mctrl |= TIOCM_CD;
+	if (val & UART_EXTINP_DSR_MASK)
+		mctrl |= TIOCM_DSR;
+	return mctrl;
+}
+
+/*
+ * serial core request to disable tx ASAP (used for flow control)
+ */
+static void bcm_uart_stop_tx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~(UART_CTL_TXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to (re)enable tx
+ */
+static void bcm_uart_start_tx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val |= UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= UART_CTL_TXEN_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to stop rx, called before port shutdown
+ */
+static void bcm_uart_stop_rx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_RX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to enable modem status interrupt reporting
+ */
+static void bcm_uart_enable_ms(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val |= UART_IR_MASK(UART_IR_EXTIP);
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to start/stop emitting break char
+ */
+static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	if (ctl)
+		val |= UART_CTL_XMITBRK_MASK;
+	else
+		val &= ~UART_CTL_XMITBRK_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * return port type in string format
+ */
+static const char *bcm_uart_type(struct uart_port *port)
+{
+	return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
+}
+
+/*
+ * read all chars in rx fifo and send them to core
+ */
+static void bcm_uart_do_rx(struct uart_port *port)
+{
+	struct tty_struct *tty;
+	unsigned int max_count;
+
+	/* limit number of char read in interrupt, should not be
+	 * higher than fifo size anyway since we're much faster than
+	 * serial port */
+	max_count = 32;
+	tty = port->info->port.tty;
+	do {
+		unsigned int iestat, c, cstat;
+		char flag;
+
+		/* get overrun/fifo empty information from ier
+		 * register */
+		iestat = bcm_uart_readl(port, UART_IR_REG);
+		if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
+			break;
+
+		cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
+		port->icount.rx++;
+		flag = TTY_NORMAL;
+		c &= 0xff;
+
+		if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
+			/* do stats first */
+			if (cstat & UART_FIFO_BRKDET_MASK) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			}
+
+			if (cstat & UART_FIFO_PARERR_MASK)
+				port->icount.parity++;
+			if (cstat & UART_FIFO_FRAMEERR_MASK)
+				port->icount.frame++;
+
+			/* update flag wrt read_status_mask */
+			cstat &= port->read_status_mask;
+			if (cstat & UART_FIFO_BRKDET_MASK)
+				flag = TTY_BREAK;
+			if (cstat & UART_FIFO_FRAMEERR_MASK)
+				flag = TTY_FRAME;
+			if (cstat & UART_FIFO_PARERR_MASK)
+				flag = TTY_PARITY;
+		}
+
+		if (uart_handle_sysrq_char(port, c))
+			continue;
+
+		if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
+			port->icount.overrun++;
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+
+		if ((cstat & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(tty, c, flag);
+
+	} while (--max_count);
+
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ * fill tx fifo with chars to send, stop when fifo is about to be full
+ * or when all chars have been sent.
+ */
+static void bcm_uart_do_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit;
+	unsigned int val, max_count;
+
+	if (port->x_char) {
+		bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_tx_stopped(port)) {
+		bcm_uart_stop_tx(port);
+		return;
+	}
+
+	xmit = &port->info->xmit;
+	if (uart_circ_empty(xmit))
+		goto txq_empty;
+
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
+	max_count = port->fifosize - val;
+
+	while (max_count--) {
+		unsigned int c;
+
+		c = xmit->buf[xmit->tail];
+		bcm_uart_writel(port, c, UART_FIFO_REG);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		goto txq_empty;
+	return;
+
+txq_empty:
+	/* nothing to send, disable transmit interrupt */
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+	return;
+}
+
+/*
+ * process uart interrupt
+ */
+static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
+{
+	struct uart_port *port;
+	unsigned int irqstat;
+
+	port = dev_id;
+	spin_lock(&port->lock);
+
+	irqstat = bcm_uart_readl(port, UART_IR_REG);
+	if (irqstat & UART_RX_INT_STAT)
+		bcm_uart_do_rx(port);
+
+	if (irqstat & UART_TX_INT_STAT)
+		bcm_uart_do_tx(port);
+
+	if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
+		unsigned int estat;
+
+		estat = bcm_uart_readl(port, UART_EXTINP_REG);
+		if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
+			uart_handle_cts_change(port,
+					       estat & UART_EXTINP_CTS_MASK);
+		if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
+			uart_handle_dcd_change(port,
+					       estat & UART_EXTINP_DCD_MASK);
+	}
+
+	spin_unlock(&port->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * enable rx & tx operation on uart
+ */
+static void bcm_uart_enable(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * disable rx & tx operation on uart
+ */
+static void bcm_uart_disable(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
+		 UART_CTL_RXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * clear all unread data in rx fifo and unsent data in tx fifo
+ */
+static void bcm_uart_flush(struct uart_port *port)
+{
+	unsigned int val;
+
+	/* empty rx and tx fifo */
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	/* read any pending char to make sure all irq status are
+	 * cleared */
+	(void)bcm_uart_readl(port, UART_FIFO_REG);
+}
+
+/*
+ * serial core request to initialize uart and start rx operation
+ */
+static int bcm_uart_startup(struct uart_port *port)
+{
+	unsigned int val;
+	int ret;
+
+	/* mask all irq and flush port */
+	bcm_uart_disable(port);
+	bcm_uart_writel(port, 0, UART_IR_REG);
+	bcm_uart_flush(port);
+
+	/* clear any pending external input interrupt */
+	(void)bcm_uart_readl(port, UART_EXTINP_REG);
+
+	/* set rx/tx fifo thresh to fifo half size */
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
+	val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
+	val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
+	bcm_uart_writel(port, val, UART_MCTL_REG);
+
+	/* set rx fifo timeout to 1 char time */
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~UART_CTL_RXTMOUTCNT_MASK;
+	val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	/* report any edge on dcd and cts */
+	val = UART_EXTINP_INT_MASK;
+	val |= UART_EXTINP_DCD_NOSENSE_MASK;
+	val |= UART_EXTINP_CTS_NOSENSE_MASK;
+	bcm_uart_writel(port, val, UART_EXTINP_REG);
+
+	/* register irq and enable rx interrupts */
+	ret = request_irq(port->irq, bcm_uart_interrupt, 0,
+			  bcm_uart_type(port), port);
+	if (ret)
+		return ret;
+	bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
+	bcm_uart_enable(port);
+	return 0;
+}
+
+/*
+ * serial core request to flush & disable uart
+ */
+static void bcm_uart_shutdown(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	bcm_uart_writel(port, 0, UART_IR_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	bcm_uart_disable(port);
+	bcm_uart_flush(port);
+	free_irq(port->irq, port);
+}
+
+/*
+ * serial core request to change current uart setting
+ */
+static void bcm_uart_set_termios(struct uart_port *port,
+				 struct ktermios *new,
+				 struct ktermios *old)
+{
+	unsigned int ctl, baud, quot, ier;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* disable uart while changing speed */
+	bcm_uart_disable(port);
+	bcm_uart_flush(port);
+
+	/* update Control register */
+	ctl = bcm_uart_readl(port, UART_CTL_REG);
+	ctl &= ~UART_CTL_BITSPERSYM_MASK;
+
+	switch (new->c_cflag & CSIZE) {
+	case CS5:
+		ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	case CS6:
+		ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	case CS7:
+		ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	default:
+		ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	}
+
+	ctl &= ~UART_CTL_STOPBITS_MASK;
+	if (new->c_cflag & CSTOPB)
+		ctl |= UART_CTL_STOPBITS_2;
+	else
+		ctl |= UART_CTL_STOPBITS_1;
+
+	ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+	if (new->c_cflag & PARENB)
+		ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+	ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+	if (new->c_cflag & PARODD)
+		ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+	bcm_uart_writel(port, ctl, UART_CTL_REG);
+
+	/* update Baudword register */
+	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+	quot = uart_get_divisor(port, baud) - 1;
+	bcm_uart_writel(port, quot, UART_BAUD_REG);
+
+	/* update Interrupt register */
+	ier = bcm_uart_readl(port, UART_IR_REG);
+
+	ier &= ~UART_IR_MASK(UART_IR_EXTIP);
+	if (UART_ENABLE_MS(port, new->c_cflag))
+		ier |= UART_IR_MASK(UART_IR_EXTIP);
+
+	bcm_uart_writel(port, ier, UART_IR_REG);
+
+	/* update read/ignore mask */
+	port->read_status_mask = UART_FIFO_VALID_MASK;
+	if (new->c_iflag & INPCK) {
+		port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
+		port->read_status_mask |= UART_FIFO_PARERR_MASK;
+	}
+	if (new->c_iflag & (BRKINT))
+		port->read_status_mask |= UART_FIFO_BRKDET_MASK;
+
+	port->ignore_status_mask = 0;
+	if (new->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
+	if (new->c_iflag & IGNBRK)
+		port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
+	if (!(new->c_cflag & CREAD))
+		port->ignore_status_mask |= UART_FIFO_VALID_MASK;
+
+	uart_update_timeout(port, new->c_cflag, baud);
+	bcm_uart_enable(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * serial core request to claim uart iomem
+ */
+static int bcm_uart_request_port(struct uart_port *port)
+{
+	unsigned int size;
+
+	size = RSET_UART_SIZE;
+	if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
+		dev_err(port->dev, "Memory region busy\n");
+		return -EBUSY;
+	}
+
+	port->membase = ioremap(port->mapbase, size);
+	if (!port->membase) {
+		dev_err(port->dev, "Unable to map registers\n");
+		release_mem_region(port->mapbase, size);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+/*
+ * serial core request to release uart iomem
+ */
+static void bcm_uart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, RSET_UART_SIZE);
+	iounmap(port->membase);
+}
+
+/*
+ * serial core request to do any port required autoconfiguration
+ */
+static void bcm_uart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		if (bcm_uart_request_port(port))
+			return;
+		port->type = PORT_BCM63XX;
+	}
+}
+
+/*
+ * serial core request to check that port information in serinfo are
+ * suitable
+ */
+static int bcm_uart_verify_port(struct uart_port *port,
+				struct serial_struct *serinfo)
+{
+	if (port->type != PORT_BCM63XX)
+		return -EINVAL;
+	if (port->irq != serinfo->irq)
+		return -EINVAL;
+	if (port->iotype != serinfo->io_type)
+		return -EINVAL;
+	if (port->mapbase != (unsigned long)serinfo->iomem_base)
+		return -EINVAL;
+	return 0;
+}
+
+/* serial core callbacks */
+static struct uart_ops bcm_uart_ops = {
+	.tx_empty	= bcm_uart_tx_empty,
+	.get_mctrl	= bcm_uart_get_mctrl,
+	.set_mctrl	= bcm_uart_set_mctrl,
+	.start_tx	= bcm_uart_start_tx,
+	.stop_tx	= bcm_uart_stop_tx,
+	.stop_rx	= bcm_uart_stop_rx,
+	.enable_ms	= bcm_uart_enable_ms,
+	.break_ctl	= bcm_uart_break_ctl,
+	.startup	= bcm_uart_startup,
+	.shutdown	= bcm_uart_shutdown,
+	.set_termios	= bcm_uart_set_termios,
+	.type		= bcm_uart_type,
+	.release_port	= bcm_uart_release_port,
+	.request_port	= bcm_uart_request_port,
+	.config_port	= bcm_uart_config_port,
+	.verify_port	= bcm_uart_verify_port,
+};
+
+
+
+#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	unsigned int tmout;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	tmout = 10000;
+	while (--tmout) {
+		unsigned int val;
+
+		val = bcm_uart_readl(port, UART_IR_REG);
+		if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+			break;
+		udelay(1);
+	}
+
+	/* Wait up to 1s for flow control if necessary */
+	if (port->flags & UPF_CONS_FLOW) {
+		tmout = 1000000;
+		while (--tmout) {
+			unsigned int val;
+
+			val = bcm_uart_readl(port, UART_EXTINP_REG);
+			if (val & UART_EXTINP_CTS_MASK)
+				break;
+			udelay(1);
+		}
+	}
+}
+
+/*
+ * output given char
+ */
+static void bcm_console_putchar(struct uart_port *port, int ch)
+{
+	wait_for_xmitr(port);
+	bcm_uart_writel(port, ch, UART_FIFO_REG);
+}
+
+/*
+ * console core request to output given string
+ */
+static void bcm_console_write(struct console *co, const char *s,
+			      unsigned int count)
+{
+	struct uart_port *port;
+	unsigned long flags;
+	int locked;
+
+	port = &ports[co->index];
+
+	local_irq_save(flags);
+	if (port->sysrq) {
+		/* bcm_uart_interrupt() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&port->lock);
+	} else {
+		spin_lock(&port->lock);
+		locked = 1;
+	}
+
+	/* call helper to deal with \r\n */
+	uart_console_write(port, s, count, bcm_console_putchar);
+
+	/* and wait for char to be transmitted */
+	wait_for_xmitr(port);
+
+	if (locked)
+		spin_unlock(&port->lock);
+	local_irq_restore(flags);
+}
+
+/*
+ * console core request to setup given console, find matching uart
+ * port and setup it.
+ */
+static int bcm_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
+		return -EINVAL;
+	port = &ports[co->index];
+	if (!port->membase)
+		return -ENODEV;
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver bcm_uart_driver;
+
+static struct console bcm63xx_console = {
+	.name		= "ttyS",
+	.write		= bcm_console_write,
+	.device		= uart_console_device,
+	.setup		= bcm_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &bcm_uart_driver,
+};
+
+static int __init bcm63xx_console_init(void)
+{
+	register_console(&bcm63xx_console);
+	return 0;
+}
+
+console_initcall(bcm63xx_console_init);
+
+#define BCM63XX_CONSOLE	(&bcm63xx_console)
+#else
+#define BCM63XX_CONSOLE	NULL
+#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
+
+static struct uart_driver bcm_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "bcm63xx_uart",
+	.dev_name	= "ttyS",
+	.major		= TTY_MAJOR,
+	.minor		= 64,
+	.nr		= 1,
+	.cons		= BCM63XX_CONSOLE,
+};
+
+/*
+ * platform driver probe/remove callback
+ */
+static int __devinit bcm_uart_probe(struct platform_device *pdev)
+{
+	struct resource *res_mem, *res_irq;
+	struct uart_port *port;
+	struct clk *clk;
+	int ret;
+
+	if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
+		return -EINVAL;
+
+	if (ports[pdev->id].membase)
+		return -EBUSY;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_mem)
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_irq)
+		return -ENODEV;
+
+	clk = clk_get(&pdev->dev, "periph");
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	port = &ports[pdev->id];
+	memset(port, 0, sizeof(*port));
+	port->iotype = UPIO_MEM;
+	port->mapbase = res_mem->start;
+	port->irq = res_irq->start;
+	port->ops = &bcm_uart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->dev = &pdev->dev;
+	port->fifosize = 16;
+	port->uartclk = clk_get_rate(clk) / 2;
+	clk_put(clk);
+
+	ret = uart_add_one_port(&bcm_uart_driver, port);
+	if (ret) {
+		kfree(port);
+		return ret;
+	}
+	platform_set_drvdata(pdev, port);
+	return 0;
+}
+
+static int __devexit bcm_uart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port;
+
+	port = platform_get_drvdata(pdev);
+	uart_remove_one_port(&bcm_uart_driver, port);
+	platform_set_drvdata(pdev, NULL);
+	/* mark port as free */
+	ports[pdev->id].membase = 0;
+	return 0;
+}
+
+/*
+ * platform driver stuff
+ */
+static struct platform_driver bcm_uart_platform_driver = {
+	.probe	= bcm_uart_probe,
+	.remove	= __devexit_p(bcm_uart_remove),
+	.driver	= {
+		.owner = THIS_MODULE,
+		.name  = "bcm63xx_uart",
+	},
+};
+
+static int __init bcm_uart_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&bcm_uart_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&bcm_uart_platform_driver);
+	if (ret)
+		uart_unregister_driver(&bcm_uart_driver);
+
+	return ret;
+}
+
+static void __exit bcm_uart_exit(void)
+{
+	platform_driver_unregister(&bcm_uart_platform_driver);
+	uart_unregister_driver(&bcm_uart_driver);
+}
+
+module_init(bcm_uart_init);
+module_exit(bcm_uart_exit);
+
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 8d349b23..300cea7 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -649,7 +649,7 @@
 	u8 *p;
 	int count;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	/* Handle xon/xoff */
 	if (port->x_char) {
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 7be52fe..31f1723 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -18,6 +18,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/major.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 6443b7f..b8629d7 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -726,9 +726,10 @@
 	.cons		= PXA_CONSOLE,
 };
 
-static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM
+static int serial_pxa_suspend(struct device *dev)
 {
-        struct uart_pxa_port *sport = platform_get_drvdata(dev);
+        struct uart_pxa_port *sport = dev_get_drvdata(dev);
 
         if (sport)
                 uart_suspend_port(&serial_pxa_reg, &sport->port);
@@ -736,9 +737,9 @@
         return 0;
 }
 
-static int serial_pxa_resume(struct platform_device *dev)
+static int serial_pxa_resume(struct device *dev)
 {
-        struct uart_pxa_port *sport = platform_get_drvdata(dev);
+        struct uart_pxa_port *sport = dev_get_drvdata(dev);
 
         if (sport)
                 uart_resume_port(&serial_pxa_reg, &sport->port);
@@ -746,6 +747,12 @@
         return 0;
 }
 
+static struct dev_pm_ops serial_pxa_pm_ops = {
+	.suspend	= serial_pxa_suspend,
+	.resume		= serial_pxa_resume,
+};
+#endif
+
 static int serial_pxa_probe(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport;
@@ -825,11 +832,12 @@
         .probe          = serial_pxa_probe,
         .remove         = serial_pxa_remove,
 
-	.suspend	= serial_pxa_suspend,
-	.resume		= serial_pxa_resume,
 	.driver		= {
 	        .name	= "pxa2xx-uart",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &serial_pxa_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index c0f950a..958a3ff 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -532,7 +532,7 @@
 	GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0)	| \
 	GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
 	GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
-	GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+	GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \
 	GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
 	GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16)	| \
 	GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
@@ -1247,8 +1247,8 @@
 		return -EINVAL;
 	}
 	if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
-		if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
-		    && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+		if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE)
+		    && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) {
 			dev_err(chip_info->dev,
 				"Clock Phase is configured incorrectly\n");
 			return -EINVAL;
@@ -1485,7 +1485,7 @@
 		chip_info->data_size = SSP_DATA_BITS_12;
 		chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
 		chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
-		chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+		chip_info->clk_phase = SSP_CLK_SECOND_EDGE;
 		chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
 		chip_info->ctrl_len = SSP_BITS_8;
 		chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 31dd56f..c8c2b69 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1668,10 +1668,9 @@
 }
 
 #ifdef CONFIG_PM
-
-static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa2xx_spi_suspend(struct device *dev)
 {
-	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct driver_data *drv_data = dev_get_drvdata(dev);
 	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
@@ -1684,9 +1683,9 @@
 	return 0;
 }
 
-static int pxa2xx_spi_resume(struct platform_device *pdev)
+static int pxa2xx_spi_resume(struct device *dev)
 {
-	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct driver_data *drv_data = dev_get_drvdata(dev);
 	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
@@ -1703,26 +1702,29 @@
 	/* Start the queue running */
 	status = start_queue(drv_data);
 	if (status != 0) {
-		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		dev_err(dev, "problem starting queue (%d)\n", status);
 		return status;
 	}
 
 	return 0;
 }
-#else
-#define pxa2xx_spi_suspend NULL
-#define pxa2xx_spi_resume NULL
-#endif /* CONFIG_PM */
+
+static struct dev_pm_ops pxa2xx_spi_pm_ops = {
+	.suspend	= pxa2xx_spi_suspend,
+	.resume		= pxa2xx_spi_resume,
+};
+#endif
 
 static struct platform_driver driver = {
 	.driver = {
-		.name = "pxa2xx-spi",
-		.owner = THIS_MODULE,
+		.name	= "pxa2xx-spi",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pxa2xx_spi_pm_ops,
+#endif
 	},
 	.remove = pxa2xx_spi_remove,
 	.shutdown = pxa2xx_spi_shutdown,
-	.suspend = pxa2xx_spi_suspend,
-	.resume = pxa2xx_spi_resume,
 };
 
 static int __init pxa2xx_spi_init(void)
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 03efb06..a9d7070 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -658,7 +658,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct uio_vm_ops = {
+static const struct vm_operations_struct uio_vm_ops = {
 	.open = uio_vma_open,
 	.close = uio_vma_close,
 	.fault = uio_vma_fault,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index b5294a9..f1c0620 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -481,38 +481,47 @@
 	return 0;
 }
 
-#ifdef	CONFIG_PM
-static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM
+static int ohci_hcd_pxa27x_drv_suspend(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
 
 	if (time_before(jiffies, ohci->ohci.next_statechange))
 		msleep(5);
 	ohci->ohci.next_statechange = jiffies;
 
-	pxa27x_stop_hc(ohci, &pdev->dev);
+	pxa27x_stop_hc(ohci, dev);
 	hcd->state = HC_STATE_SUSPENDED;
 
 	return 0;
 }
 
-static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
+static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+	struct pxaohci_platform_data *inf = dev->platform_data;
 	int status;
 
 	if (time_before(jiffies, ohci->ohci.next_statechange))
 		msleep(5);
 	ohci->ohci.next_statechange = jiffies;
 
-	if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
+	if ((status = pxa27x_start_hc(ohci, dev)) < 0)
 		return status;
 
+	/* Select Power Management Mode */
+	pxa27x_ohci_select_pmm(ohci, inf->port_mode);
+
 	ohci_finish_controller_resume(hcd);
 	return 0;
 }
+
+static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = {
+	.suspend	= ohci_hcd_pxa27x_drv_suspend,
+	.resume		= ohci_hcd_pxa27x_drv_resume,
+};
 #endif
 
 /* work with hotplug and coldplug */
@@ -522,13 +531,12 @@
 	.probe		= ohci_hcd_pxa27x_drv_probe,
 	.remove		= ohci_hcd_pxa27x_drv_remove,
 	.shutdown	= usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
-	.suspend	= ohci_hcd_pxa27x_drv_suspend,
-	.resume		= ohci_hcd_pxa27x_drv_resume,
-#endif
 	.driver		= {
 		.name	= "pxa27x-ohci",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &ohci_hcd_pxa27x_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index 273de5d..0ab9907 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -43,7 +43,6 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <linux/kref.h>
 
 #include "sisusb.h"
 
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index dfdc43e..9ed3e74 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1174,7 +1174,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct mon_bin_vm_ops = {
+static const struct vm_operations_struct mon_bin_vm_ops = {
 	.open =     mon_bin_vma_open,
 	.close =    mon_bin_vma_close,
 	.fault =    mon_bin_vma_fault,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index ff75a35..aa6b2ae 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -192,7 +192,7 @@
  * This is the first place a new tty gets used.  Hence this is where we
  * acquire references to the usb_serial structure and the driver module,
  * where we store a pointer to the port, and where we do an autoresume.
- * All these actions are reversed in serial_release().
+ * All these actions are reversed in serial_cleanup().
  */
 static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 {
@@ -339,15 +339,16 @@
 }
 
 /**
- * serial_release - free resources post close/hangup
+ * serial_cleanup - free resources post close/hangup
  * @port: port to free up
  *
  * Do the resource freeing and refcount dropping for the port.
  * Avoid freeing the console.
  *
- * Called when the last tty kref is dropped.
+ * Called asynchronously after the last tty kref is dropped,
+ * and the tty layer has already done the tty_shutdown(tty);
  */
-static void serial_release(struct tty_struct *tty)
+static void serial_cleanup(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial;
@@ -361,9 +362,6 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* Standard shutdown processing */
-	tty_shutdown(tty);
-
 	tty->driver_data = NULL;
 
 	serial = port->serial;
@@ -1210,7 +1208,7 @@
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
-	.shutdown = 		serial_release,
+	.cleanup = 		serial_cleanup,
 	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,
 };
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 90861cd..09bfa96 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -31,6 +31,13 @@
 	  Say y here to support the LCD panels usually found on SHARP
 	  corgi (C7x0) and spitz (Cxx00) models.
 
+config LCD_LMS283GF05
+	tristate "Samsung LMS283GF05 LCD"
+	depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+	help
+	  SPI driver for Samsung LMS283GF05. This provides basic support
+	  for powering the LCD up/down through a sysfs interface.
+
 config LCD_LTV350QV
 	tristate "Samsung LTV350QV LCD Panel"
 	depends on LCD_CLASS_DEVICE && SPI_MASTER
@@ -229,3 +236,29 @@
 	help
 	  If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
 	  backlight driver.
+
+config BACKLIGHT_WM831X
+	tristate "WM831x PMIC Backlight Driver"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
+	help
+	  If you have a backlight driven by the ISINK and DCDC of a
+	  WM831x PMIC say y to enable the backlight driver for it.
+
+config BACKLIGHT_ADX
+	tristate "Avionic Design Xanthos Backlight Driver"
+	depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX
+	default y
+	help
+	  Say Y to enable the backlight driver on Avionic Design Xanthos-based
+	  boards.
+
+config BACKLIGHT_ADP5520
+	tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
+	depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520
+	help
+	  If you have a LCD backlight connected to the BST/BL_SNK output of
+	  ADP5520 or ADP5501, say Y here to enable this driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called adp5520_bl.
+
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 4eb178c..9a40554 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
 obj-$(CONFIG_LCD_CORGI)		   += corgi_lcd.o
 obj-$(CONFIG_LCD_HP700)		   += jornada720_lcd.o
+obj-$(CONFIG_LCD_LMS283GF05)	   += lms283gf05.o
 obj-$(CONFIG_LCD_LTV350QV)	   += ltv350qv.o
 obj-$(CONFIG_LCD_ILI9320)	   += ili9320.o
 obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
@@ -24,4 +25,7 @@
 obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
 obj-$(CONFIG_BACKLIGHT_TOSA)	+= tosa_bl.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)	+= kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_WM831X)	+= wm831x_bl.o
+obj-$(CONFIG_BACKLIGHT_ADX)    += adx_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP5520)	+= adp5520_bl.o
 
diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c
new file mode 100644
index 0000000..ad05da5
--- /dev/null
+++ b/drivers/video/backlight/adp5520_bl.c
@@ -0,0 +1,377 @@
+/*
+ * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/adp5520.h>
+
+struct adp5520_bl {
+	struct device *master;
+	struct adp5520_backlight_platfrom_data *pdata;
+	struct mutex lock;
+	unsigned long cached_daylight_max;
+	int id;
+	int current_brightness;
+};
+
+static int adp5520_bl_set(struct backlight_device *bl, int brightness)
+{
+	struct adp5520_bl *data = bl_get_data(bl);
+	struct device *master = data->master;
+	int ret = 0;
+
+	if (data->pdata->en_ambl_sens) {
+		if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) {
+			/* Disable Ambient Light auto adjust */
+			ret |= adp5520_clr_bits(master, BL_CONTROL,
+					BL_AUTO_ADJ);
+			ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+		} else {
+			/*
+			 * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+			 * restore daylight l3 sysfs brightness
+			 */
+			ret |= adp5520_write(master, DAYLIGHT_MAX,
+					 data->cached_daylight_max);
+			ret |= adp5520_set_bits(master, BL_CONTROL,
+					 BL_AUTO_ADJ);
+		}
+	} else {
+		ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+	}
+
+	if (data->current_brightness && brightness == 0)
+		ret |= adp5520_set_bits(master,
+				MODE_STATUS, DIM_EN);
+	else if (data->current_brightness == 0 && brightness)
+		ret |= adp5520_clr_bits(master,
+				MODE_STATUS, DIM_EN);
+
+	if (!ret)
+		data->current_brightness = brightness;
+
+	return ret;
+}
+
+static int adp5520_bl_update_status(struct backlight_device *bl)
+{
+	int brightness = bl->props.brightness;
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	return adp5520_bl_set(bl, brightness);
+}
+
+static int adp5520_bl_get_brightness(struct backlight_device *bl)
+{
+	struct adp5520_bl *data = bl_get_data(bl);
+	int error;
+	uint8_t reg_val;
+
+	error = adp5520_read(data->master, BL_VALUE, &reg_val);
+
+	return error ? data->current_brightness : reg_val;
+}
+
+static struct backlight_ops adp5520_bl_ops = {
+	.update_status	= adp5520_bl_update_status,
+	.get_brightness	= adp5520_bl_get_brightness,
+};
+
+static int adp5520_bl_setup(struct backlight_device *bl)
+{
+	struct adp5520_bl *data = bl_get_data(bl);
+	struct device *master = data->master;
+	struct adp5520_backlight_platfrom_data *pdata = data->pdata;
+	int ret = 0;
+
+	ret |= adp5520_write(master, DAYLIGHT_MAX, pdata->l1_daylight_max);
+	ret |= adp5520_write(master, DAYLIGHT_DIM, pdata->l1_daylight_dim);
+
+	if (pdata->en_ambl_sens) {
+		data->cached_daylight_max = pdata->l1_daylight_max;
+		ret |= adp5520_write(master, OFFICE_MAX, pdata->l2_office_max);
+		ret |= adp5520_write(master, OFFICE_DIM, pdata->l2_office_dim);
+		ret |= adp5520_write(master, DARK_MAX, pdata->l3_dark_max);
+		ret |= adp5520_write(master, DARK_DIM, pdata->l3_dark_dim);
+		ret |= adp5520_write(master, L2_TRIP, pdata->l2_trip);
+		ret |= adp5520_write(master, L2_HYS, pdata->l2_hyst);
+		ret |= adp5520_write(master, L3_TRIP, pdata->l3_trip);
+		ret |= adp5520_write(master, L3_HYS, pdata->l3_hyst);
+		ret |= adp5520_write(master, ALS_CMPR_CFG,
+			ALS_CMPR_CFG_VAL(pdata->abml_filt, L3_EN));
+	}
+
+	ret |= adp5520_write(master, BL_CONTROL,
+			BL_CTRL_VAL(pdata->fade_led_law, pdata->en_ambl_sens));
+
+	ret |= adp5520_write(master, BL_FADE, FADE_VAL(pdata->fade_in,
+			pdata->fade_out));
+
+	ret |= adp5520_set_bits(master, MODE_STATUS, BL_EN | DIM_EN);
+
+	return ret;
+}
+
+static ssize_t adp5520_show(struct device *dev, char *buf, int reg)
+{
+	struct adp5520_bl *data = dev_get_drvdata(dev);
+	int error;
+	uint8_t reg_val;
+
+	mutex_lock(&data->lock);
+	error = adp5520_read(data->master, reg, &reg_val);
+	mutex_unlock(&data->lock);
+
+	return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp5520_store(struct device *dev, const char *buf,
+			 size_t count, int reg)
+{
+	struct adp5520_bl *data = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&data->lock);
+	adp5520_write(data->master, reg, val);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t adp5520_bl_dark_max_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DARK_MAX);
+}
+
+static ssize_t adp5520_bl_dark_max_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, DARK_MAX);
+}
+static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show,
+			adp5520_bl_dark_max_store);
+
+static ssize_t adp5520_bl_office_max_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, OFFICE_MAX);
+}
+
+static ssize_t adp5520_bl_office_max_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, OFFICE_MAX);
+}
+static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show,
+			adp5520_bl_office_max_store);
+
+static ssize_t adp5520_bl_daylight_max_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DAYLIGHT_MAX);
+}
+
+static ssize_t adp5520_bl_daylight_max_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct adp5520_bl *data = dev_get_drvdata(dev);
+
+	strict_strtoul(buf, 10, &data->cached_daylight_max);
+	return adp5520_store(dev, buf, count, DAYLIGHT_MAX);
+}
+static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show,
+			adp5520_bl_daylight_max_store);
+
+static ssize_t adp5520_bl_dark_dim_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DARK_DIM);
+}
+
+static ssize_t adp5520_bl_dark_dim_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, DARK_DIM);
+}
+static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show,
+			adp5520_bl_dark_dim_store);
+
+static ssize_t adp5520_bl_office_dim_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, OFFICE_DIM);
+}
+
+static ssize_t adp5520_bl_office_dim_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, OFFICE_DIM);
+}
+static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show,
+			adp5520_bl_office_dim_store);
+
+static ssize_t adp5520_bl_daylight_dim_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DAYLIGHT_DIM);
+}
+
+static ssize_t adp5520_bl_daylight_dim_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, DAYLIGHT_DIM);
+}
+static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show,
+			adp5520_bl_daylight_dim_store);
+
+static struct attribute *adp5520_bl_attributes[] = {
+	&dev_attr_dark_max.attr,
+	&dev_attr_dark_dim.attr,
+	&dev_attr_office_max.attr,
+	&dev_attr_office_dim.attr,
+	&dev_attr_daylight_max.attr,
+	&dev_attr_daylight_dim.attr,
+	NULL
+};
+
+static const struct attribute_group adp5520_bl_attr_group = {
+	.attrs = adp5520_bl_attributes,
+};
+
+static int __devinit adp5520_bl_probe(struct platform_device *pdev)
+{
+	struct backlight_device *bl;
+	struct adp5520_bl *data;
+	int ret = 0;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	data->master = pdev->dev.parent;
+	data->pdata = pdev->dev.platform_data;
+
+	if (data->pdata  == NULL) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		kfree(data);
+		return -ENODEV;
+	}
+
+	data->id = pdev->id;
+	data->current_brightness = 0;
+
+	mutex_init(&data->lock);
+
+	bl = backlight_device_register(pdev->name, data->master,
+			data, &adp5520_bl_ops);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		kfree(data);
+		return PTR_ERR(bl);
+	}
+
+	bl->props.max_brightness =
+		bl->props.brightness = ADP5020_MAX_BRIGHTNESS;
+
+	if (data->pdata->en_ambl_sens)
+		ret = sysfs_create_group(&bl->dev.kobj,
+			&adp5520_bl_attr_group);
+
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register sysfs\n");
+		backlight_device_unregister(bl);
+		kfree(data);
+	}
+
+	platform_set_drvdata(pdev, bl);
+	ret |= adp5520_bl_setup(bl);
+	backlight_update_status(bl);
+
+	return ret;
+}
+
+static int __devexit adp5520_bl_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	struct adp5520_bl *data = bl_get_data(bl);
+
+	adp5520_clr_bits(data->master, MODE_STATUS, BL_EN);
+
+	if (data->pdata->en_ambl_sens)
+		sysfs_remove_group(&bl->dev.kobj,
+				&adp5520_bl_attr_group);
+
+	backlight_device_unregister(bl);
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5520_bl_suspend(struct platform_device *pdev,
+				 pm_message_t state)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	return adp5520_bl_set(bl, 0);
+}
+
+static int adp5520_bl_resume(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+
+	backlight_update_status(bl);
+	return 0;
+}
+#else
+#define adp5520_bl_suspend	NULL
+#define adp5520_bl_resume	NULL
+#endif
+
+static struct platform_driver adp5520_bl_driver = {
+	.driver		= {
+		.name	= "adp5520-backlight",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= adp5520_bl_probe,
+	.remove		= __devexit_p(adp5520_bl_remove),
+	.suspend	= adp5520_bl_suspend,
+	.resume		= adp5520_bl_resume,
+};
+
+static int __init adp5520_bl_init(void)
+{
+	return platform_driver_register(&adp5520_bl_driver);
+}
+module_init(adp5520_bl_init);
+
+static void __exit adp5520_bl_exit(void)
+{
+	platform_driver_unregister(&adp5520_bl_driver);
+}
+module_exit(adp5520_bl_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5520(01) Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-backlight");
diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c
new file mode 100644
index 0000000..2c3bdfc
--- /dev/null
+++ b/drivers/video/backlight/adx_bl.c
@@ -0,0 +1,178 @@
+/*
+ * linux/drivers/video/backlight/adx.c
+ *
+ * Copyright (C) 2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Written by Thierry Reding <thierry.reding@avionic-design.de>
+ */
+
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/* register definitions */
+#define ADX_BACKLIGHT_CONTROL		0x00
+#define ADX_BACKLIGHT_CONTROL_ENABLE	(1 << 0)
+#define ADX_BACKLIGHT_BRIGHTNESS	0x08
+#define ADX_BACKLIGHT_STATUS		0x10
+#define ADX_BACKLIGHT_ERROR		0x18
+
+struct adxbl {
+	void __iomem *base;
+};
+
+static int adx_backlight_update_status(struct backlight_device *bldev)
+{
+	struct adxbl *bl = bl_get_data(bldev);
+	u32 value;
+
+	value = bldev->props.brightness;
+	writel(value, bl->base + ADX_BACKLIGHT_BRIGHTNESS);
+
+	value = readl(bl->base + ADX_BACKLIGHT_CONTROL);
+
+	if (bldev->props.state & BL_CORE_FBBLANK)
+		value &= ~ADX_BACKLIGHT_CONTROL_ENABLE;
+	else
+		value |= ADX_BACKLIGHT_CONTROL_ENABLE;
+
+	writel(value, bl->base + ADX_BACKLIGHT_CONTROL);
+
+	return 0;
+}
+
+static int adx_backlight_get_brightness(struct backlight_device *bldev)
+{
+	struct adxbl *bl = bl_get_data(bldev);
+	u32 brightness;
+
+	brightness = readl(bl->base + ADX_BACKLIGHT_BRIGHTNESS);
+	return brightness & 0xff;
+}
+
+static int adx_backlight_check_fb(struct fb_info *fb)
+{
+	return 1;
+}
+
+static struct backlight_ops adx_backlight_ops = {
+	.options = 0,
+	.update_status = adx_backlight_update_status,
+	.get_brightness = adx_backlight_get_brightness,
+	.check_fb = adx_backlight_check_fb,
+};
+
+static int __devinit adx_backlight_probe(struct platform_device *pdev)
+{
+	struct backlight_device *bldev;
+	struct resource *res;
+	struct adxbl *bl;
+	int ret = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+			resource_size(res), res->name);
+	if (!res) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL);
+	if (!bl) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bl->base = devm_ioremap_nocache(&pdev->dev, res->start,
+			resource_size(res));
+	if (!bl->base) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, bl,
+			&adx_backlight_ops);
+	if (!bldev) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bldev->props.max_brightness = 0xff;
+	bldev->props.brightness = 0xff;
+	bldev->props.power = FB_BLANK_UNBLANK;
+
+	platform_set_drvdata(pdev, bldev);
+
+out:
+	return ret;
+}
+
+static int __devexit adx_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bldev;
+	int ret = 0;
+
+	bldev = platform_get_drvdata(pdev);
+	bldev->props.power = FB_BLANK_UNBLANK;
+	bldev->props.brightness = 0xff;
+	backlight_update_status(bldev);
+	backlight_device_unregister(bldev);
+	platform_set_drvdata(pdev, NULL);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int adx_backlight_suspend(struct platform_device *pdev,
+		pm_message_t state)
+{
+	return 0;
+}
+
+static int adx_backlight_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+#else
+#define adx_backlight_suspend NULL
+#define adx_backlight_resume NULL
+#endif
+
+static struct platform_driver adx_backlight_driver = {
+	.probe = adx_backlight_probe,
+	.remove = __devexit_p(adx_backlight_remove),
+	.suspend = adx_backlight_suspend,
+	.resume = adx_backlight_resume,
+	.driver = {
+		.name = "adx-backlight",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init adx_backlight_init(void)
+{
+	return platform_driver_register(&adx_backlight_driver);
+}
+
+static void __exit adx_backlight_exit(void)
+{
+	platform_driver_unregister(&adx_backlight_driver);
+}
+
+module_init(adx_backlight_init);
+module_exit(adx_backlight_exit);
+
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_DESCRIPTION("Avionic Design Xanthos Backlight Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 157057c..6615ac7 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -73,6 +73,27 @@
 }
 #endif /* CONFIG_FB */
 
+static void backlight_generate_event(struct backlight_device *bd,
+				     enum backlight_update_reason reason)
+{
+	char *envp[2];
+
+	switch (reason) {
+	case BACKLIGHT_UPDATE_SYSFS:
+		envp[0] = "SOURCE=sysfs";
+		break;
+	case BACKLIGHT_UPDATE_HOTKEY:
+		envp[0] = "SOURCE=hotkey";
+		break;
+	default:
+		envp[0] = "SOURCE=unknown";
+		break;
+	}
+	envp[1] = NULL;
+	kobject_uevent_env(&bd->dev.kobj, KOBJ_CHANGE, envp);
+	sysfs_notify(&bd->dev.kobj, NULL, "actual_brightness");
+}
+
 static ssize_t backlight_show_power(struct device *dev,
 		struct device_attribute *attr,char *buf)
 {
@@ -142,6 +163,8 @@
 	}
 	mutex_unlock(&bd->ops_lock);
 
+	backlight_generate_event(bd, BACKLIGHT_UPDATE_SYSFS);
+
 	return rc;
 }
 
@@ -214,6 +237,25 @@
 };
 
 /**
+ * backlight_force_update - tell the backlight subsystem that hardware state
+ *   has changed
+ * @bd: the backlight device to update
+ *
+ * Updates the internal state of the backlight in response to a hardware event,
+ * and generate a uevent to notify userspace
+ */
+void backlight_force_update(struct backlight_device *bd,
+			    enum backlight_update_reason reason)
+{
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->get_brightness)
+		bd->props.brightness = bd->ops->get_brightness(bd);
+	mutex_unlock(&bd->ops_lock);
+	backlight_generate_event(bd, reason);
+}
+EXPORT_SYMBOL(backlight_force_update);
+
+/**
  * backlight_device_register - create and register a new object of
  *   backlight_device class.
  * @name: the name of the new object(must be the same as the name of the
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index 93bb434..701a108 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -154,34 +154,38 @@
 }
 
 #ifdef CONFIG_PM
-static int da903x_backlight_suspend(struct platform_device *pdev,
-				 pm_message_t state)
+static int da903x_backlight_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 	return da903x_backlight_set(bl, 0);
 }
 
-static int da903x_backlight_resume(struct platform_device *pdev)
+static int da903x_backlight_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 
 	backlight_update_status(bl);
 	return 0;
 }
-#else
-#define da903x_backlight_suspend	NULL
-#define da903x_backlight_resume		NULL
+
+static struct dev_pm_ops da903x_backlight_pm_ops = {
+	.suspend	= da903x_backlight_suspend,
+	.resume		= da903x_backlight_resume,
+};
 #endif
 
 static struct platform_driver da903x_backlight_driver = {
 	.driver		= {
 		.name	= "da903x-backlight",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &da903x_backlight_pm_ops,
+#endif
 	},
 	.probe		= da903x_backlight_probe,
 	.remove		= da903x_backlight_remove,
-	.suspend	= da903x_backlight_suspend,
-	.resume		= da903x_backlight_resume,
 };
 
 static int __init da903x_backlight_init(void)
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index 5be55a2..7fb4eef 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -103,7 +103,7 @@
 	.update_status  = hp680bl_set_intensity,
 };
 
-static int __init hp680bl_probe(struct platform_device *pdev)
+static int __devinit hp680bl_probe(struct platform_device *pdev)
 {
 	struct backlight_device *bd;
 
diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
new file mode 100644
index 0000000..447b542
--- /dev/null
+++ b/drivers/video/backlight/lms283gf05.c
@@ -0,0 +1,242 @@
+/*
+ * lms283gf05.c -- support for Samsung LMS283GF05 LCD
+ *
+ * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/lcd.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/lms283gf05.h>
+
+struct lms283gf05_state {
+	struct spi_device	*spi;
+	struct lcd_device	*ld;
+};
+
+struct lms283gf05_seq {
+	unsigned char		reg;
+	unsigned short		value;
+	unsigned char		delay;
+};
+
+/* Magic sequences supplied by manufacturer, for details refer to datasheet */
+static struct lms283gf05_seq disp_initseq[] = {
+	/* REG, VALUE, DELAY */
+	{ 0x07, 0x0000, 0 },
+	{ 0x13, 0x0000, 10 },
+
+	{ 0x11, 0x3004, 0 },
+	{ 0x14, 0x200F, 0 },
+	{ 0x10, 0x1a20, 0 },
+	{ 0x13, 0x0040, 50 },
+
+	{ 0x13, 0x0060, 0 },
+	{ 0x13, 0x0070, 200 },
+
+	{ 0x01, 0x0127, 0 },
+	{ 0x02,	0x0700, 0 },
+	{ 0x03, 0x1030, 0 },
+	{ 0x08, 0x0208, 0 },
+	{ 0x0B, 0x0620, 0 },
+	{ 0x0C, 0x0110, 0 },
+	{ 0x30, 0x0120, 0 },
+	{ 0x31, 0x0127, 0 },
+	{ 0x32, 0x0000, 0 },
+	{ 0x33, 0x0503, 0 },
+	{ 0x34, 0x0727, 0 },
+	{ 0x35, 0x0124, 0 },
+	{ 0x36, 0x0706, 0 },
+	{ 0x37, 0x0701, 0 },
+	{ 0x38, 0x0F00, 0 },
+	{ 0x39, 0x0F00, 0 },
+	{ 0x40, 0x0000, 0 },
+	{ 0x41, 0x0000, 0 },
+	{ 0x42, 0x013f, 0 },
+	{ 0x43, 0x0000, 0 },
+	{ 0x44, 0x013f, 0 },
+	{ 0x45, 0x0000, 0 },
+	{ 0x46, 0xef00, 0 },
+	{ 0x47, 0x013f, 0 },
+	{ 0x48, 0x0000, 0 },
+	{ 0x07, 0x0015, 30 },
+
+	{ 0x07, 0x0017, 0 },
+
+	{ 0x20, 0x0000, 0 },
+	{ 0x21, 0x0000, 0 },
+	{ 0x22, 0x0000, 0 }
+};
+
+static struct lms283gf05_seq disp_pdwnseq[] = {
+	{ 0x07, 0x0016, 30 },
+
+	{ 0x07, 0x0004, 0 },
+	{ 0x10, 0x0220, 20 },
+
+	{ 0x13, 0x0060, 50 },
+
+	{ 0x13, 0x0040, 50 },
+
+	{ 0x13, 0x0000, 0 },
+	{ 0x10, 0x0000, 0 }
+};
+
+
+static void lms283gf05_reset(unsigned long gpio, bool inverted)
+{
+	gpio_set_value(gpio, !inverted);
+	mdelay(100);
+	gpio_set_value(gpio, inverted);
+	mdelay(20);
+	gpio_set_value(gpio, !inverted);
+	mdelay(20);
+}
+
+static void lms283gf05_toggle(struct spi_device *spi,
+			struct lms283gf05_seq *seq, int sz)
+{
+	char buf[3];
+	int i;
+
+	for (i = 0; i < sz; i++) {
+		buf[0] = 0x74;
+		buf[1] = 0x00;
+		buf[2] = seq[i].reg;
+		spi_write(spi, buf, 3);
+
+		buf[0] = 0x76;
+		buf[1] = seq[i].value >> 8;
+		buf[2] = seq[i].value & 0xff;
+		spi_write(spi, buf, 3);
+
+		mdelay(seq[i].delay);
+	}
+}
+
+static int lms283gf05_power_set(struct lcd_device *ld, int power)
+{
+	struct lms283gf05_state *st = lcd_get_data(ld);
+	struct spi_device *spi = st->spi;
+	struct lms283gf05_pdata *pdata = spi->dev.platform_data;
+
+	if (power) {
+		if (pdata)
+			lms283gf05_reset(pdata->reset_gpio,
+					pdata->reset_inverted);
+		lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
+	} else {
+		lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
+		if (pdata)
+			gpio_set_value(pdata->reset_gpio,
+					pdata->reset_inverted);
+	}
+
+	return 0;
+}
+
+static struct lcd_ops lms_ops = {
+	.set_power	= lms283gf05_power_set,
+	.get_power	= NULL,
+};
+
+static int __devinit lms283gf05_probe(struct spi_device *spi)
+{
+	struct lms283gf05_state *st;
+	struct lms283gf05_pdata *pdata = spi->dev.platform_data;
+	struct lcd_device *ld;
+	int ret = 0;
+
+	if (pdata != NULL) {
+		ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET");
+		if (ret)
+			return ret;
+
+		ret = gpio_direction_output(pdata->reset_gpio,
+						!pdata->reset_inverted);
+		if (ret)
+			goto err;
+	}
+
+	st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL);
+	if (st == NULL) {
+		dev_err(&spi->dev, "No memory for device state\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops);
+	if (IS_ERR(ld)) {
+		ret = PTR_ERR(ld);
+		goto err2;
+	}
+
+	st->spi = spi;
+	st->ld = ld;
+
+	dev_set_drvdata(&spi->dev, st);
+
+	/* kick in the LCD */
+	if (pdata)
+		lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted);
+	lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
+
+	return 0;
+
+err2:
+	kfree(st);
+err:
+	if (pdata != NULL)
+		gpio_free(pdata->reset_gpio);
+
+	return ret;
+}
+
+static int __devexit lms283gf05_remove(struct spi_device *spi)
+{
+	struct lms283gf05_state *st = dev_get_drvdata(&spi->dev);
+	struct lms283gf05_pdata *pdata = st->spi->dev.platform_data;
+
+	lcd_device_unregister(st->ld);
+
+	if (pdata != NULL)
+		gpio_free(pdata->reset_gpio);
+
+	kfree(st);
+
+	return 0;
+}
+
+static struct spi_driver lms283gf05_driver = {
+	.driver = {
+		.name	= "lms283gf05",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= lms283gf05_probe,
+	.remove		= __devexit_p(lms283gf05_remove),
+};
+
+static __init int lms283gf05_init(void)
+{
+	return spi_register_driver(&lms283gf05_driver);
+}
+
+static __exit void lms283gf05_exit(void)
+{
+	spi_unregister_driver(&lms283gf05_driver);
+}
+
+module_init(lms283gf05_init);
+module_exit(lms283gf05_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("LCD283GF05 LCD");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
index 3bb4c0a..9edb8d7 100644
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -166,6 +166,15 @@
 	},
 	{
 		.callback	= mbp_dmi_match,
+		.ident		= "MacBookAir 1,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir1,1"),
+		},
+		.driver_data	= (void *)&intel_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
 		.ident		= "MacBook 5,1",
 		.matches	= {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
@@ -175,6 +184,15 @@
 	},
 	{
 		.callback	= mbp_dmi_match,
+		.ident		= "MacBook 5,2",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
 		.ident		= "MacBookAir 2,1",
 		.matches	= {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
@@ -191,6 +209,24 @@
 		},
 		.driver_data	= (void *)&nvidia_chipset_data,
 	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookPro 5,2",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,2"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookPro 5,5",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,5"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
 	{ }
 };
 
diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c
new file mode 100644
index 0000000..467bdb7
--- /dev/null
+++ b/drivers/video/backlight/wm831x_bl.c
@@ -0,0 +1,250 @@
+/*
+ * Backlight driver for Wolfson Microelectronics WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectonics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+struct wm831x_backlight_data {
+	struct wm831x *wm831x;
+	int isink_reg;
+	int current_brightness;
+};
+
+static int wm831x_backlight_set(struct backlight_device *bl, int brightness)
+{
+	struct wm831x_backlight_data *data = bl_get_data(bl);
+	struct wm831x *wm831x = data->wm831x;
+	int power_up = !data->current_brightness && brightness;
+	int power_down = data->current_brightness && !brightness;
+	int ret;
+
+	if (power_up) {
+		/* Enable the ISINK */
+		ret = wm831x_set_bits(wm831x, data->isink_reg,
+				      WM831X_CS1_ENA, WM831X_CS1_ENA);
+		if (ret < 0)
+			goto err;
+
+		/* Enable the DC-DC */
+		ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+				      WM831X_DC4_ENA, WM831X_DC4_ENA);
+		if (ret < 0)
+			goto err;
+	}
+
+	if (power_down) {
+		/* DCDC first */
+		ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+				      WM831X_DC4_ENA, 0);
+		if (ret < 0)
+			goto err;
+
+		/* ISINK */
+		ret = wm831x_set_bits(wm831x, data->isink_reg,
+				      WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0);
+		if (ret < 0)
+			goto err;
+	}
+
+	/* Set the new brightness */
+	ret = wm831x_set_bits(wm831x, data->isink_reg,
+			      WM831X_CS1_ISEL_MASK, brightness);
+	if (ret < 0)
+		goto err;
+
+	if (power_up) {
+		/* Drive current through the ISINK */
+		ret = wm831x_set_bits(wm831x, data->isink_reg,
+				      WM831X_CS1_DRIVE, WM831X_CS1_DRIVE);
+		if (ret < 0)
+			return ret;
+	}
+
+	data->current_brightness = brightness;
+
+	return 0;
+
+err:
+	/* If we were in the middle of a power transition always shut down
+	 * for safety.
+	 */
+	if (power_up || power_down) {
+		wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+		wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0);
+	}
+
+	return ret;
+}
+
+static int wm831x_backlight_update_status(struct backlight_device *bl)
+{
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (bl->props.state & BL_CORE_SUSPENDED)
+		brightness = 0;
+
+	return wm831x_backlight_set(bl, brightness);
+}
+
+static int wm831x_backlight_get_brightness(struct backlight_device *bl)
+{
+	struct wm831x_backlight_data *data = bl_get_data(bl);
+	return data->current_brightness;
+}
+
+static struct backlight_ops wm831x_backlight_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status	= wm831x_backlight_update_status,
+	.get_brightness	= wm831x_backlight_get_brightness,
+};
+
+static int wm831x_backlight_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *wm831x_pdata;
+	struct wm831x_backlight_pdata *pdata;
+	struct wm831x_backlight_data *data;
+	struct backlight_device *bl;
+	int ret, i, max_isel, isink_reg, dcdc_cfg;
+
+	/* We need platform data */
+	if (pdev->dev.parent->platform_data) {
+		wm831x_pdata = pdev->dev.parent->platform_data;
+		pdata = wm831x_pdata->backlight;
+	} else {
+		pdata = NULL;
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data supplied\n");
+		return -EINVAL;
+	}
+
+	/* Figure out the maximum current we can use */
+	for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) {
+		if (wm831x_isinkv_values[i] > pdata->max_uA)
+			break;
+	}
+
+	if (i == 0) {
+		dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA);
+		return -EINVAL;
+	}
+	max_isel = i - 1;
+
+	if (pdata->max_uA != wm831x_isinkv_values[max_isel])
+		dev_warn(&pdev->dev,
+			 "Maximum current is %duA not %duA as requested\n",
+			 wm831x_isinkv_values[max_isel], pdata->max_uA);
+
+	switch (pdata->isink) {
+	case 1:
+		isink_reg = WM831X_CURRENT_SINK_1;
+		dcdc_cfg = 0;
+		break;
+	case 2:
+		isink_reg = WM831X_CURRENT_SINK_2;
+		dcdc_cfg = WM831X_DC4_FBSRC;
+		break;
+	default:
+		dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink);
+		return -EINVAL;
+	}
+
+	/* Configure the ISINK to use for feedback */
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret < 0)
+		return ret;
+
+	ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC,
+			      dcdc_cfg);
+
+	wm831x_reg_lock(wm831x);
+	if (ret < 0)
+		return ret;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	data->wm831x = wm831x;
+	data->current_brightness = 0;
+	data->isink_reg = isink_reg;
+
+	bl = backlight_device_register("wm831x", &pdev->dev,
+			data, &wm831x_backlight_ops);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		kfree(data);
+		return PTR_ERR(bl);
+	}
+
+	bl->props.max_brightness = max_isel;
+	bl->props.brightness = max_isel;
+
+	platform_set_drvdata(pdev, bl);
+
+	/* Disable the DCDC if it was started so we can bootstrap */
+	wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+
+
+	backlight_update_status(bl);
+
+	return 0;
+}
+
+static int wm831x_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	struct wm831x_backlight_data *data = bl_get_data(bl);
+
+	backlight_device_unregister(bl);
+	kfree(data);
+	return 0;
+}
+
+static struct platform_driver wm831x_backlight_driver = {
+	.driver		= {
+		.name	= "wm831x-backlight",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm831x_backlight_probe,
+	.remove		= wm831x_backlight_remove,
+};
+
+static int __init wm831x_backlight_init(void)
+{
+	return platform_driver_register(&wm831x_backlight_driver);
+}
+module_init(wm831x_backlight_init);
+
+static void __exit wm831x_backlight_exit(void)
+{
+	platform_driver_unregister(&wm831x_backlight_driver);
+}
+module_exit(wm831x_backlight_exit);
+
+MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-backlight");
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 0a7a667..c27ab1e 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -125,7 +125,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct fb_deferred_io_vm_ops = {
+static const struct vm_operations_struct fb_deferred_io_vm_ops = {
 	.fault		= fb_deferred_io_fault,
 	.page_mkwrite	= fb_deferred_io_mkwrite,
 };
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index a1f2e7c..99bbd28 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1800,7 +1800,7 @@
  		global = 1;
  	}
 
- 	if (!global && !strstr(options, "fb:")) {
+ 	if (!global && !strchr(options, ':')) {
  		fb_mode_option = options;
  		global = 1;
  	}
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 80a11d0..f16e421 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -1035,7 +1035,7 @@
 	atomic_dec(&dispc.map_count[plane]);
 }
 
-static struct vm_operations_struct mmap_user_ops = {
+static const struct vm_operations_struct mmap_user_ops = {
 	.open = mmap_user_open,
 	.close = mmap_user_close,
 };
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 6506117..1820c4a 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1638,24 +1638,26 @@
  * Power management hooks.  Note that we won't be called from IRQ context,
  * unlike the blank functions above, so we may sleep.
  */
-static int pxafb_suspend(struct platform_device *dev, pm_message_t state)
+static int pxafb_suspend(struct device *dev)
 {
-	struct pxafb_info *fbi = platform_get_drvdata(dev);
+	struct pxafb_info *fbi = dev_get_drvdata(dev);
 
 	set_ctrlr_state(fbi, C_DISABLE_PM);
 	return 0;
 }
 
-static int pxafb_resume(struct platform_device *dev)
+static int pxafb_resume(struct device *dev)
 {
-	struct pxafb_info *fbi = platform_get_drvdata(dev);
+	struct pxafb_info *fbi = dev_get_drvdata(dev);
 
 	set_ctrlr_state(fbi, C_ENABLE_PM);
 	return 0;
 }
-#else
-#define pxafb_suspend	NULL
-#define pxafb_resume	NULL
+
+static struct dev_pm_ops pxafb_pm_ops = {
+	.suspend	= pxafb_suspend,
+	.resume		= pxafb_resume,
+};
 #endif
 
 static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi)
@@ -2081,6 +2083,9 @@
 		goto failed;
 	}
 
+	if (cpu_is_pxa3xx() && inf->acceleration_enabled)
+		fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
+
 	fbi->backlight_power = inf->pxafb_backlight_power;
 	fbi->lcd_power = inf->pxafb_lcd_power;
 
@@ -2091,14 +2096,14 @@
 		goto failed_fbi;
 	}
 
-	r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
+	r = request_mem_region(r->start, resource_size(r), dev->name);
 	if (r == NULL) {
 		dev_err(&dev->dev, "failed to request I/O memory\n");
 		ret = -EBUSY;
 		goto failed_fbi;
 	}
 
-	fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	fbi->mmio_base = ioremap(r->start, resource_size(r));
 	if (fbi->mmio_base == NULL) {
 		dev_err(&dev->dev, "failed to map I/O memory\n");
 		ret = -EBUSY;
@@ -2197,7 +2202,7 @@
 failed_free_io:
 	iounmap(fbi->mmio_base);
 failed_free_res:
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 failed_fbi:
 	clk_put(fbi->clk);
 	platform_set_drvdata(dev, NULL);
@@ -2237,7 +2242,7 @@
 	iounmap(fbi->mmio_base);
 
 	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 
 	clk_put(fbi->clk);
 	kfree(fbi);
@@ -2248,11 +2253,12 @@
 static struct platform_driver pxafb_driver = {
 	.probe		= pxafb_probe,
 	.remove 	= __devexit_p(pxafb_remove),
-	.suspend	= pxafb_suspend,
-	.resume		= pxafb_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "pxa2xx-fb",
+#ifdef CONFIG_PM
+		.pm	= &pxafb_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ff3eb8f..3711b88 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -282,6 +282,13 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called nuc900_wdt.
 
+config ADX_WATCHDOG
+	tristate "Avionic Design Xanthos watchdog"
+	depends on ARCH_PXA_ADX
+	help
+	  Say Y here if you want support for the watchdog timer on Avionic
+	  Design Xanthos boards.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 348b3b8..699199b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -45,6 +45,7 @@
 obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c
new file mode 100644
index 0000000..77afb0a
--- /dev/null
+++ b/drivers/watchdog/adx_wdt.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright (C) 2008-2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define WATCHDOG_NAME "adx-wdt"
+
+/* register offsets */
+#define	ADX_WDT_CONTROL		0x00
+#define	ADX_WDT_CONTROL_ENABLE	(1 << 0)
+#define	ADX_WDT_CONTROL_nRESET	(1 << 1)
+#define	ADX_WDT_TIMEOUT		0x08
+
+static struct platform_device *adx_wdt_dev;
+static unsigned long driver_open;
+
+#define	WDT_STATE_STOP	0
+#define	WDT_STATE_START	1
+
+struct adx_wdt {
+	void __iomem *base;
+	unsigned long timeout;
+	unsigned int state;
+	unsigned int wake;
+	spinlock_t lock;
+};
+
+static struct watchdog_info adx_wdt_info = {
+	.identity = "Avionic Design Xanthos Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+static void adx_wdt_start_locked(struct adx_wdt *wdt)
+{
+	u32 ctrl;
+
+	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+	ctrl |= ADX_WDT_CONTROL_ENABLE;
+	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+	wdt->state = WDT_STATE_START;
+}
+
+static void adx_wdt_start(struct adx_wdt *wdt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	adx_wdt_start_locked(wdt);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_stop_locked(struct adx_wdt *wdt)
+{
+	u32 ctrl;
+
+	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+	wdt->state = WDT_STATE_STOP;
+}
+
+static void adx_wdt_stop(struct adx_wdt *wdt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	adx_wdt_stop_locked(wdt);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds)
+{
+	unsigned long timeout = seconds * 1000;
+	unsigned long flags;
+	unsigned int state;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	state = wdt->state;
+	adx_wdt_stop_locked(wdt);
+	writel(timeout, wdt->base + ADX_WDT_TIMEOUT);
+
+	if (state == WDT_STATE_START)
+		adx_wdt_start_locked(wdt);
+
+	wdt->timeout = timeout;
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds)
+{
+	*seconds = wdt->timeout / 1000;
+}
+
+static void adx_wdt_keepalive(struct adx_wdt *wdt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static int adx_wdt_open(struct inode *inode, struct file *file)
+{
+	struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev);
+
+	if (test_and_set_bit(0, &driver_open))
+		return -EBUSY;
+
+	file->private_data = wdt;
+	adx_wdt_set_timeout(wdt, 30);
+	adx_wdt_start(wdt);
+
+	return nonseekable_open(inode, file);
+}
+
+static int adx_wdt_release(struct inode *inode, struct file *file)
+{
+	struct adx_wdt *wdt = file->private_data;
+
+	adx_wdt_stop(wdt);
+	clear_bit(0, &driver_open);
+
+	return 0;
+}
+
+static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct adx_wdt *wdt = file->private_data;
+	void __user *argp = (void __user *)arg;
+	unsigned long __user *p = argp;
+	unsigned long seconds = 0;
+	unsigned int options;
+	long ret = -EINVAL;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info)))
+			return -EFAULT;
+		else
+			return 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		adx_wdt_keepalive(wdt);
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(seconds, p))
+			return -EFAULT;
+
+		adx_wdt_set_timeout(wdt, seconds);
+
+		/* fallthrough */
+	case WDIOC_GETTIMEOUT:
+		adx_wdt_get_timeout(wdt, &seconds);
+		return put_user(seconds, p);
+
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&options, argp, sizeof(options)))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			adx_wdt_stop(wdt);
+			ret = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			adx_wdt_start(wdt);
+			ret = 0;
+		}
+
+		return ret;
+
+	default:
+		break;
+	}
+
+	return -ENOTTY;
+}
+
+static ssize_t adx_wdt_write(struct file *file, const char __user *data,
+		size_t len, loff_t *ppos)
+{
+	struct adx_wdt *wdt = file->private_data;
+
+	if (len)
+		adx_wdt_keepalive(wdt);
+
+	return len;
+}
+
+static const struct file_operations adx_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.open = adx_wdt_open,
+	.release = adx_wdt_release,
+	.unlocked_ioctl = adx_wdt_ioctl,
+	.write = adx_wdt_write,
+};
+
+static struct miscdevice adx_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &adx_wdt_fops,
+};
+
+static int __devinit adx_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct adx_wdt *wdt;
+	int ret = 0;
+	u32 ctrl;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt) {
+		dev_err(&pdev->dev, "cannot allocate WDT structure\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&wdt->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region\n");
+		return -ENXIO;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+			res->end - res->start + 1, res->name);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region\n");
+		return -ENXIO;
+	}
+
+	wdt->base = devm_ioremap_nocache(&pdev->dev, res->start,
+			res->end - res->start + 1);
+	if (!wdt->base) {
+		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+		return -ENXIO;
+	}
+
+	/* disable watchdog and reboot on timeout */
+	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+	ctrl &= ~ADX_WDT_CONTROL_nRESET;
+	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+
+	platform_set_drvdata(pdev, wdt);
+	adx_wdt_dev = pdev;
+
+	ret = misc_register(&adx_wdt_miscdev);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register miscdev on minor %d "
+				"(err=%d)\n", WATCHDOG_MINOR, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __devexit adx_wdt_remove(struct platform_device *pdev)
+{
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+	misc_deregister(&adx_wdt_miscdev);
+	adx_wdt_stop(wdt);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static void adx_wdt_shutdown(struct platform_device *pdev)
+{
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+	adx_wdt_stop(wdt);
+}
+
+#ifdef CONFIG_PM
+static int adx_wdt_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+	wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0;
+	adx_wdt_stop(wdt);
+
+	return 0;
+}
+
+static int adx_wdt_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+	if (wdt->wake)
+		adx_wdt_start(wdt);
+
+	return 0;
+}
+
+static struct dev_pm_ops adx_wdt_pm_ops = {
+	.suspend = adx_wdt_suspend,
+	.resume = adx_wdt_resume,
+};
+
+#  define ADX_WDT_PM_OPS	(&adx_wdt_pm_ops)
+#else
+#  define ADX_WDT_PM_OPS	NULL
+#endif
+
+static struct platform_driver adx_wdt_driver = {
+	.probe = adx_wdt_probe,
+	.remove = __devexit_p(adx_wdt_remove),
+	.shutdown = adx_wdt_shutdown,
+	.driver = {
+		.name = WATCHDOG_NAME,
+		.owner = THIS_MODULE,
+		.pm = ADX_WDT_PM_OPS,
+	},
+};
+
+static int __init adx_wdt_init(void)
+{
+	return platform_driver_register(&adx_wdt_driver);
+}
+
+static void __exit adx_wdt_exit(void)
+{
+	platform_driver_unregister(&adx_wdt_driver);
+}
+
+module_init(adx_wdt_init);
+module_exit(adx_wdt_exit);
+
+MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 571ad3c..a3492a3 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1184,7 +1184,7 @@
 	return ret > 0 ? EIO : ret;
 }
 
-static struct vm_operations_struct btrfs_file_vm_ops = {
+static const struct vm_operations_struct btrfs_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite	= btrfs_page_mkwrite,
 };
diff --git a/fs/buffer.c b/fs/buffer.c
index 24afd74..6fa5302 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -280,7 +280,7 @@
 EXPORT_SYMBOL(invalidate_bdev);
 
 /*
- * Kick pdflush then try to free up some ZONE_NORMAL memory.
+ * Kick the writeback threads then try to free up some ZONE_NORMAL memory.
  */
 static void free_more_memory(void)
 {
@@ -1709,9 +1709,9 @@
 		/*
 		 * If it's a fully non-blocking write attempt and we cannot
 		 * lock the buffer then redirty the page.  Note that this can
-		 * potentially cause a busy-wait loop from pdflush and kswapd
-		 * activity, but those code paths have their own higher-level
-		 * throttling.
+		 * potentially cause a busy-wait loop from writeback threads
+		 * and kswapd activity, but those code paths have their own
+		 * higher-level throttling.
 		 */
 		if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
 			lock_buffer(bh);
@@ -3208,7 +3208,7 @@
  * still running obsolete flush daemons, so we terminate them here.
  *
  * Use of bdflush() is deprecated and will be removed in a future kernel.
- * The `pdflush' kernel threads fully replace bdflush daemons and this call.
+ * The `flush-X' kernel threads fully replace bdflush daemons and this call.
  */
 SYSCALL_DEFINE2(bdflush, int, func, long, data)
 {
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 6994a0f..80f3525 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -2,6 +2,7 @@
 	tristate "CIFS support (advanced network filesystem, SMBFS successor)"
 	depends on INET
 	select NLS
+	select SLOW_WORK
 	help
 	  This is the client VFS module for the Common Internet File System
 	  (CIFS) protocol which is the successor to the Server Message Block
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 90c5b39..9a5e4f5 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -64,9 +64,6 @@
 unsigned int extended_security = CIFSSEC_DEF;
 /* unsigned int ntlmv2_support = 0; */
 unsigned int sign_CIFS_PDUs = 1;
-extern struct task_struct *oplockThread; /* remove sparse warning */
-struct task_struct *oplockThread = NULL;
-/* extern struct task_struct * dnotifyThread; remove sparse warning */
 static const struct super_operations cifs_super_ops;
 unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
 module_param(CIFSMaxBufSize, int, 0);
@@ -972,89 +969,12 @@
 	kmem_cache_destroy(cifs_oplock_cachep);
 }
 
-static int cifs_oplock_thread(void *dummyarg)
-{
-	struct oplock_q_entry *oplock_item;
-	struct cifsTconInfo *pTcon;
-	struct inode *inode;
-	__u16  netfid;
-	int rc, waitrc = 0;
-
-	set_freezable();
-	do {
-		if (try_to_freeze())
-			continue;
-
-		spin_lock(&cifs_oplock_lock);
-		if (list_empty(&cifs_oplock_list)) {
-			spin_unlock(&cifs_oplock_lock);
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule_timeout(39*HZ);
-		} else {
-			oplock_item = list_entry(cifs_oplock_list.next,
-						struct oplock_q_entry, qhead);
-			cFYI(1, ("found oplock item to write out"));
-			pTcon = oplock_item->tcon;
-			inode = oplock_item->pinode;
-			netfid = oplock_item->netfid;
-			spin_unlock(&cifs_oplock_lock);
-			DeleteOplockQEntry(oplock_item);
-			/* can not grab inode sem here since it would
-				deadlock when oplock received on delete
-				since vfs_unlink holds the i_mutex across
-				the call */
-			/* mutex_lock(&inode->i_mutex);*/
-			if (S_ISREG(inode->i_mode)) {
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-				if (CIFS_I(inode)->clientCanCacheAll == 0)
-					break_lease(inode, FMODE_READ);
-				else if (CIFS_I(inode)->clientCanCacheRead == 0)
-					break_lease(inode, FMODE_WRITE);
-#endif
-				rc = filemap_fdatawrite(inode->i_mapping);
-				if (CIFS_I(inode)->clientCanCacheRead == 0) {
-					waitrc = filemap_fdatawait(
-							      inode->i_mapping);
-					invalidate_remote_inode(inode);
-				}
-				if (rc == 0)
-					rc = waitrc;
-			} else
-				rc = 0;
-			/* mutex_unlock(&inode->i_mutex);*/
-			if (rc)
-				CIFS_I(inode)->write_behind_rc = rc;
-			cFYI(1, ("Oplock flush inode %p rc %d",
-				inode, rc));
-
-				/* releasing stale oplock after recent reconnect
-				of smb session using a now incorrect file
-				handle is not a data integrity issue but do
-				not bother sending an oplock release if session
-				to server still is disconnected since oplock
-				already released by the server in that case */
-			if (!pTcon->need_reconnect) {
-				rc = CIFSSMBLock(0, pTcon, netfid,
-						0 /* len */ , 0 /* offset */, 0,
-						0, LOCKING_ANDX_OPLOCK_RELEASE,
-						false /* wait flag */);
-				cFYI(1, ("Oplock release rc = %d", rc));
-			}
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule_timeout(1);  /* yield in case q were corrupt */
-		}
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
 static int __init
 init_cifs(void)
 {
 	int rc = 0;
 	cifs_proc_init();
 	INIT_LIST_HEAD(&cifs_tcp_ses_list);
-	INIT_LIST_HEAD(&cifs_oplock_list);
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 	INIT_LIST_HEAD(&GlobalDnotifyReqList);
 	INIT_LIST_HEAD(&GlobalDnotifyRsp_Q);
@@ -1083,7 +1003,6 @@
 	rwlock_init(&GlobalSMBSeslock);
 	rwlock_init(&cifs_tcp_ses_lock);
 	spin_lock_init(&GlobalMid_Lock);
-	spin_lock_init(&cifs_oplock_lock);
 
 	if (cifs_max_pending < 2) {
 		cifs_max_pending = 2;
@@ -1118,16 +1037,13 @@
 	if (rc)
 		goto out_unregister_key_type;
 #endif
-	oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd");
-	if (IS_ERR(oplockThread)) {
-		rc = PTR_ERR(oplockThread);
-		cERROR(1, ("error %d create oplock thread", rc));
-		goto out_unregister_dfs_key_type;
-	}
+	rc = slow_work_register_user();
+	if (rc)
+		goto out_unregister_resolver_key;
 
 	return 0;
 
- out_unregister_dfs_key_type:
+ out_unregister_resolver_key:
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	unregister_key_type(&key_type_dns_resolver);
  out_unregister_key_type:
@@ -1164,7 +1080,6 @@
 	cifs_destroy_inodecache();
 	cifs_destroy_mids();
 	cifs_destroy_request_bufs();
-	kthread_stop(oplockThread);
 }
 
 MODULE_AUTHOR("Steve French <sfrench@us.ibm.com>");
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 6cfc81a..5d0fde1 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -18,6 +18,7 @@
  */
 #include <linux/in.h>
 #include <linux/in6.h>
+#include <linux/slow-work.h>
 #include "cifs_fs_sb.h"
 #include "cifsacl.h"
 /*
@@ -346,14 +347,16 @@
 	/* lock scope id (0 if none) */
 	struct file *pfile; /* needed for writepage */
 	struct inode *pInode; /* needed for oplock break */
+	struct vfsmount *mnt;
 	struct mutex lock_mutex;
 	struct list_head llist; /* list of byte range locks we have. */
 	bool closePend:1;	/* file is marked to close */
 	bool invalidHandle:1;	/* file closed via session abend */
-	bool messageMode:1;	/* for pipes: message vs byte mode */
+	bool oplock_break_cancelled:1;
 	atomic_t count;		/* reference count */
 	struct mutex fh_mutex; /* prevents reopen race after dead ses*/
 	struct cifs_search_info srch_inf;
+	struct slow_work oplock_break; /* slow_work job for oplock breaks */
 };
 
 /* Take a reference on the file private data */
@@ -365,8 +368,10 @@
 /* Release a reference on the file private data */
 static inline void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
 {
-	if (atomic_dec_and_test(&cifs_file->count))
+	if (atomic_dec_and_test(&cifs_file->count)) {
+		iput(cifs_file->pInode);
 		kfree(cifs_file);
+	}
 }
 
 /*
@@ -382,7 +387,6 @@
 	unsigned long time;	/* jiffies of last update/check of inode */
 	bool clientCanCacheRead:1;	/* read oplock */
 	bool clientCanCacheAll:1;	/* read and writebehind oplock */
-	bool oplockPending:1;
 	bool delete_pending:1;		/* DELETE_ON_CLOSE is set */
 	u64  server_eof;		/* current file size on server */
 	u64  uniqueid;			/* server inode number */
@@ -585,9 +589,9 @@
 #define   CIFSSEC_MUST_LANMAN	0x10010
 #define   CIFSSEC_MUST_PLNTXT	0x20020
 #ifdef CONFIG_CIFS_UPCALL
-#define   CIFSSEC_MASK          0xAF0AF /* allows weak security but also krb5 */
+#define   CIFSSEC_MASK          0xBF0BF /* allows weak security but also krb5 */
 #else
-#define   CIFSSEC_MASK          0xA70A7 /* current flags supported if weak */
+#define   CIFSSEC_MASK          0xB70B7 /* current flags supported if weak */
 #endif /* UPCALL */
 #else /* do not allow weak pw hash */
 #ifdef CONFIG_CIFS_UPCALL
@@ -669,12 +673,6 @@
  */
 GLOBAL_EXTERN rwlock_t GlobalSMBSeslock;
 
-/* Global list of oplocks */
-GLOBAL_EXTERN struct list_head cifs_oplock_list;
-
-/* Protects the cifs_oplock_list */
-GLOBAL_EXTERN spinlock_t cifs_oplock_lock;
-
 /* Outstanding dir notify requests */
 GLOBAL_EXTERN struct list_head GlobalDnotifyReqList;
 /* DirNotify response queue */
@@ -725,3 +723,4 @@
 GLOBAL_EXTERN unsigned int cifs_min_small;  /* min size of small buf pool */
 GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
 
+extern const struct slow_work_ops cifs_oplock_break_ops;
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index da8fbf5..6928c24 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -86,18 +86,17 @@
 			     const int stage,
 			     const struct nls_table *nls_cp);
 extern __u16 GetNextMid(struct TCP_Server_Info *server);
-extern struct oplock_q_entry *AllocOplockQEntry(struct inode *, u16,
-						 struct cifsTconInfo *);
-extern void DeleteOplockQEntry(struct oplock_q_entry *);
-extern void DeleteTconOplockQEntries(struct cifsTconInfo *);
 extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
 extern u64 cifs_UnixTimeToNT(struct timespec);
 extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
 				      int offset);
 
+extern struct cifsFileInfo *cifs_new_fileinfo(struct inode *newinode,
+				__u16 fileHandle, struct file *file,
+				struct vfsmount *mnt, unsigned int oflags);
 extern int cifs_posix_open(char *full_path, struct inode **pinode,
-			   struct super_block *sb, int mode, int oflags,
-			   int *poplock, __u16 *pnetfid, int xid);
+			   struct vfsmount *mnt, int mode, int oflags,
+			   __u32 *poplock, __u16 *pnetfid, int xid);
 extern void cifs_unix_basic_to_fattr(struct cifs_fattr *fattr,
 				     FILE_UNIX_BASIC_INFO *info,
 				     struct cifs_sb_info *cifs_sb);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 301e307..941441d 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -94,6 +94,7 @@
 	list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
 		open_file = list_entry(tmp, struct cifsFileInfo, tlist);
 		open_file->invalidHandle = true;
+		open_file->oplock_break_cancelled = true;
 	}
 	write_unlock(&GlobalSMBSeslock);
 	/* BB Add call to invalidate_inodes(sb) for all superblocks mounted
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index d496824..43003e0 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1670,7 +1670,6 @@
 	CIFSSMBTDis(xid, tcon);
 	_FreeXid(xid);
 
-	DeleteTconOplockQEntries(tcon);
 	tconInfoFree(tcon);
 	cifs_put_smb_ses(ses);
 }
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index a6424cf..627a60a 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -24,6 +24,7 @@
 #include <linux/stat.h>
 #include <linux/slab.h>
 #include <linux/namei.h>
+#include <linux/mount.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #include "cifsglob.h"
@@ -129,44 +130,45 @@
 	return full_path;
 }
 
-static void
-cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
-			struct cifsTconInfo *tcon, bool write_only)
+struct cifsFileInfo *
+cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
+		  struct file *file, struct vfsmount *mnt, unsigned int oflags)
 {
 	int oplock = 0;
 	struct cifsFileInfo *pCifsFile;
 	struct cifsInodeInfo *pCifsInode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
 
 	pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
 	if (pCifsFile == NULL)
-		return;
+		return pCifsFile;
 
 	if (oplockEnabled)
 		oplock = REQ_OPLOCK;
 
 	pCifsFile->netfid = fileHandle;
 	pCifsFile->pid = current->tgid;
-	pCifsFile->pInode = newinode;
+	pCifsFile->pInode = igrab(newinode);
+	pCifsFile->mnt = mnt;
+	pCifsFile->pfile = file;
 	pCifsFile->invalidHandle = false;
 	pCifsFile->closePend = false;
 	mutex_init(&pCifsFile->fh_mutex);
 	mutex_init(&pCifsFile->lock_mutex);
 	INIT_LIST_HEAD(&pCifsFile->llist);
 	atomic_set(&pCifsFile->count, 1);
+	slow_work_init(&pCifsFile->oplock_break, &cifs_oplock_break_ops);
 
-	/* set the following in open now
-			pCifsFile->pfile = file; */
 	write_lock(&GlobalSMBSeslock);
-	list_add(&pCifsFile->tlist, &tcon->openFileList);
+	list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
 	pCifsInode = CIFS_I(newinode);
 	if (pCifsInode) {
 		/* if readable file instance put first in list*/
-		if (write_only)
+		if (oflags & FMODE_READ)
+			list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+		else
 			list_add_tail(&pCifsFile->flist,
 				      &pCifsInode->openFileList);
-		else
-			list_add(&pCifsFile->flist, &pCifsInode->openFileList);
 
 		if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
 			pCifsInode->clientCanCacheAll = true;
@@ -176,18 +178,18 @@
 				pCifsInode->clientCanCacheRead = true;
 	}
 	write_unlock(&GlobalSMBSeslock);
+
+	return pCifsFile;
 }
 
 int cifs_posix_open(char *full_path, struct inode **pinode,
-		    struct super_block *sb, int mode, int oflags,
-		    int *poplock, __u16 *pnetfid, int xid)
+		    struct vfsmount *mnt, int mode, int oflags,
+		    __u32 *poplock, __u16 *pnetfid, int xid)
 {
 	int rc;
-	__u32 oplock;
-	bool write_only = false;
 	FILE_UNIX_BASIC_INFO *presp_data;
 	__u32 posix_flags = 0;
-	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
 	struct cifs_fattr fattr;
 
 	cFYI(1, ("posix open %s", full_path));
@@ -223,12 +225,9 @@
 	if (oflags & O_DIRECT)
 		posix_flags |= SMB_O_DIRECT;
 
-	if (!(oflags & FMODE_READ))
-		write_only = true;
-
 	mode &= ~current_umask();
 	rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
-			pnetfid, presp_data, &oplock, full_path,
+			pnetfid, presp_data, poplock, full_path,
 			cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc)
@@ -244,7 +243,7 @@
 
 	/* get new inode and set it up */
 	if (*pinode == NULL) {
-		*pinode = cifs_iget(sb, &fattr);
+		*pinode = cifs_iget(mnt->mnt_sb, &fattr);
 		if (!*pinode) {
 			rc = -ENOMEM;
 			goto posix_open_ret;
@@ -253,7 +252,7 @@
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-	cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+	cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt, oflags);
 
 posix_open_ret:
 	kfree(presp_data);
@@ -280,7 +279,7 @@
 	int rc = -ENOENT;
 	int xid;
 	int create_options = CREATE_NOT_DIR;
-	int oplock = 0;
+	__u32 oplock = 0;
 	int oflags;
 	bool posix_create = false;
 	/*
@@ -298,7 +297,6 @@
 	FILE_ALL_INFO *buf = NULL;
 	struct inode *newinode = NULL;
 	int disposition = FILE_OVERWRITE_IF;
-	bool write_only = false;
 
 	xid = GetXid();
 
@@ -323,7 +321,7 @@
 	if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
 	    (CIFS_UNIX_POSIX_PATH_OPS_CAP &
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
-		rc = cifs_posix_open(full_path, &newinode, inode->i_sb,
+		rc = cifs_posix_open(full_path, &newinode, nd->path.mnt,
 				     mode, oflags, &oplock, &fileHandle, xid);
 		/* EIO could indicate that (posix open) operation is not
 		   supported, despite what server claimed in capability
@@ -351,11 +349,8 @@
 		desiredAccess = 0;
 		if (oflags & FMODE_READ)
 			desiredAccess |= GENERIC_READ; /* is this too little? */
-		if (oflags & FMODE_WRITE) {
+		if (oflags & FMODE_WRITE)
 			desiredAccess |= GENERIC_WRITE;
-			if (!(oflags & FMODE_READ))
-				write_only = true;
-		}
 
 		if ((oflags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
 			disposition = FILE_CREATE;
@@ -470,8 +465,8 @@
 		/* mknod case - do not leave file open */
 		CIFSSMBClose(xid, tcon, fileHandle);
 	} else if (!(posix_create) && (newinode)) {
-			cifs_fill_fileinfo(newinode, fileHandle,
-					cifs_sb->tcon, write_only);
+			cifs_new_fileinfo(newinode, fileHandle, NULL,
+						nd->path.mnt, oflags);
 	}
 cifs_create_out:
 	kfree(buf);
@@ -611,7 +606,7 @@
 {
 	int xid;
 	int rc = 0; /* to get around spurious gcc warning, set to zero here */
-	int oplock = 0;
+	__u32 oplock = 0;
 	__u16 fileHandle = 0;
 	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
@@ -683,8 +678,7 @@
 		if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
 		     (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
 		     (nd->intent.open.flags & O_CREAT)) {
-			rc = cifs_posix_open(full_path, &newInode,
-					parent_dir_inode->i_sb,
+			rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
 					nd->intent.open.create_mode,
 					nd->intent.open.flags, &oplock,
 					&fileHandle, xid);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index fa7beac..429337e 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -30,6 +30,7 @@
 #include <linux/writeback.h>
 #include <linux/task_io_accounting_ops.h>
 #include <linux/delay.h>
+#include <linux/mount.h>
 #include <asm/div64.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
@@ -39,27 +40,6 @@
 #include "cifs_debug.h"
 #include "cifs_fs_sb.h"
 
-static inline struct cifsFileInfo *cifs_init_private(
-	struct cifsFileInfo *private_data, struct inode *inode,
-	struct file *file, __u16 netfid)
-{
-	memset(private_data, 0, sizeof(struct cifsFileInfo));
-	private_data->netfid = netfid;
-	private_data->pid = current->tgid;
-	mutex_init(&private_data->fh_mutex);
-	mutex_init(&private_data->lock_mutex);
-	INIT_LIST_HEAD(&private_data->llist);
-	private_data->pfile = file; /* needed for writepage */
-	private_data->pInode = inode;
-	private_data->invalidHandle = false;
-	private_data->closePend = false;
-	/* Initialize reference count to one.  The private data is
-	freed on the release of the last reference */
-	atomic_set(&private_data->count, 1);
-
-	return private_data;
-}
-
 static inline int cifs_convert_flags(unsigned int flags)
 {
 	if ((flags & O_ACCMODE) == O_RDONLY)
@@ -123,9 +103,11 @@
 }
 
 /* all arguments to this function must be checked for validity in caller */
-static inline int cifs_posix_open_inode_helper(struct inode *inode,
-			struct file *file, struct cifsInodeInfo *pCifsInode,
-			struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
+static inline int
+cifs_posix_open_inode_helper(struct inode *inode, struct file *file,
+			     struct cifsInodeInfo *pCifsInode,
+			     struct cifsFileInfo *pCifsFile, __u32 oplock,
+			     u16 netfid)
 {
 
 	write_lock(&GlobalSMBSeslock);
@@ -219,17 +201,6 @@
 	struct timespec temp;
 	int rc;
 
-	/* want handles we can use to read with first
-	   in the list so we do not have to walk the
-	   list to search for one in write_begin */
-	if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
-		list_add_tail(&pCifsFile->flist,
-			      &pCifsInode->openFileList);
-	} else {
-		list_add(&pCifsFile->flist,
-			 &pCifsInode->openFileList);
-	}
-	write_unlock(&GlobalSMBSeslock);
 	if (pCifsInode->clientCanCacheRead) {
 		/* we have the inode open somewhere else
 		   no need to discard cache data */
@@ -279,7 +250,8 @@
 int cifs_open(struct inode *inode, struct file *file)
 {
 	int rc = -EACCES;
-	int xid, oplock;
+	int xid;
+	__u32 oplock;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
 	struct cifsFileInfo *pCifsFile;
@@ -324,7 +296,7 @@
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, &inode, inode->i_sb,
+		rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
 				     cifs_sb->mnt_file_mode /* ignored */,
 				     oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -414,24 +386,17 @@
 		cFYI(1, ("cifs_open returned 0x%x", rc));
 		goto out;
 	}
-	file->private_data =
-		kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+	pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
+					file->f_flags);
+	file->private_data = pCifsFile;
 	if (file->private_data == NULL) {
 		rc = -ENOMEM;
 		goto out;
 	}
-	pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
-	write_lock(&GlobalSMBSeslock);
-	list_add(&pCifsFile->tlist, &tcon->openFileList);
 
-	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	if (pCifsInode) {
-		rc = cifs_open_inode_helper(inode, file, pCifsInode,
-					    pCifsFile, tcon,
-					    &oplock, buf, full_path, xid);
-	} else {
-		write_unlock(&GlobalSMBSeslock);
-	}
+	rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
+				    &oplock, buf, full_path, xid);
 
 	if (oplock & CIFS_CREATE_ACTION) {
 		/* time to set mode which we can not set earlier due to
@@ -474,7 +439,8 @@
 static int cifs_reopen_file(struct file *file, bool can_flush)
 {
 	int rc = -EACCES;
-	int xid, oplock;
+	int xid;
+	__u32 oplock;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
 	struct cifsFileInfo *pCifsFile;
@@ -543,7 +509,7 @@
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, NULL, inode->i_sb,
+		rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
 				     cifs_sb->mnt_file_mode /* ignored */,
 				     oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -2308,6 +2274,73 @@
 	return rc;
 }
 
+static void
+cifs_oplock_break(struct slow_work *work)
+{
+	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+						  oplock_break);
+	struct inode *inode = cfile->pInode;
+	struct cifsInodeInfo *cinode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(cfile->mnt->mnt_sb);
+	int rc, waitrc = 0;
+
+	if (inode && S_ISREG(inode->i_mode)) {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+		if (cinode->clientCanCacheAll == 0)
+			break_lease(inode, FMODE_READ);
+		else if (cinode->clientCanCacheRead == 0)
+			break_lease(inode, FMODE_WRITE);
+#endif
+		rc = filemap_fdatawrite(inode->i_mapping);
+		if (cinode->clientCanCacheRead == 0) {
+			waitrc = filemap_fdatawait(inode->i_mapping);
+			invalidate_remote_inode(inode);
+		}
+		if (!rc)
+			rc = waitrc;
+		if (rc)
+			cinode->write_behind_rc = rc;
+		cFYI(1, ("Oplock flush inode %p rc %d", inode, rc));
+	}
+
+	/*
+	 * releasing stale oplock after recent reconnect of smb session using
+	 * a now incorrect file handle is not a data integrity issue but do
+	 * not bother sending an oplock release if session to server still is
+	 * disconnected since oplock already released by the server
+	 */
+	if (!cfile->closePend && !cfile->oplock_break_cancelled) {
+		rc = CIFSSMBLock(0, cifs_sb->tcon, cfile->netfid, 0, 0, 0, 0,
+				 LOCKING_ANDX_OPLOCK_RELEASE, false);
+		cFYI(1, ("Oplock release rc = %d", rc));
+	}
+}
+
+static int
+cifs_oplock_break_get(struct slow_work *work)
+{
+	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+						  oplock_break);
+	mntget(cfile->mnt);
+	cifsFileInfo_get(cfile);
+	return 0;
+}
+
+static void
+cifs_oplock_break_put(struct slow_work *work)
+{
+	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+						  oplock_break);
+	mntput(cfile->mnt);
+	cifsFileInfo_put(cfile);
+}
+
+const struct slow_work_ops cifs_oplock_break_ops = {
+	.get_ref	= cifs_oplock_break_get,
+	.put_ref	= cifs_oplock_break_put,
+	.execute	= cifs_oplock_break,
+};
+
 const struct address_space_operations cifs_addr_ops = {
 	.readpage = cifs_readpage,
 	.readpages = cifs_readpages,
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index e079a91..0241b25 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -32,7 +32,6 @@
 
 extern mempool_t *cifs_sm_req_poolp;
 extern mempool_t *cifs_req_poolp;
-extern struct task_struct *oplockThread;
 
 /* The xid serves as a useful identifier for each incoming vfs request,
    in a similar way to the mid which is useful to track each sent smb,
@@ -500,6 +499,7 @@
 	struct cifsTconInfo *tcon;
 	struct cifsInodeInfo *pCifsInode;
 	struct cifsFileInfo *netfile;
+	int rc;
 
 	cFYI(1, ("Checking for oplock break or dnotify response"));
 	if ((pSMB->hdr.Command == SMB_COM_NT_TRANSACT) &&
@@ -562,30 +562,40 @@
 				continue;
 
 			cifs_stats_inc(&tcon->num_oplock_brks);
-			write_lock(&GlobalSMBSeslock);
+			read_lock(&GlobalSMBSeslock);
 			list_for_each(tmp2, &tcon->openFileList) {
 				netfile = list_entry(tmp2, struct cifsFileInfo,
 						     tlist);
 				if (pSMB->Fid != netfile->netfid)
 					continue;
 
-				write_unlock(&GlobalSMBSeslock);
-				read_unlock(&cifs_tcp_ses_lock);
+				/*
+				 * don't do anything if file is about to be
+				 * closed anyway.
+				 */
+				if (netfile->closePend) {
+					read_unlock(&GlobalSMBSeslock);
+					read_unlock(&cifs_tcp_ses_lock);
+					return true;
+				}
+
 				cFYI(1, ("file id match, oplock break"));
 				pCifsInode = CIFS_I(netfile->pInode);
 				pCifsInode->clientCanCacheAll = false;
 				if (pSMB->OplockLevel == 0)
 					pCifsInode->clientCanCacheRead = false;
-				pCifsInode->oplockPending = true;
-				AllocOplockQEntry(netfile->pInode,
-						  netfile->netfid, tcon);
-				cFYI(1, ("about to wake up oplock thread"));
-				if (oplockThread)
-					wake_up_process(oplockThread);
-
+				rc = slow_work_enqueue(&netfile->oplock_break);
+				if (rc) {
+					cERROR(1, ("failed to enqueue oplock "
+						   "break: %d\n", rc));
+				} else {
+					netfile->oplock_break_cancelled = false;
+				}
+				read_unlock(&GlobalSMBSeslock);
+				read_unlock(&cifs_tcp_ses_lock);
 				return true;
 			}
-			write_unlock(&GlobalSMBSeslock);
+			read_unlock(&GlobalSMBSeslock);
 			read_unlock(&cifs_tcp_ses_lock);
 			cFYI(1, ("No matching file for oplock break"));
 			return true;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index f823a4a..1f098ca 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -146,7 +146,7 @@
 	}
 }
 
-void
+static void
 cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info,
 		       struct cifs_sb_info *cifs_sb)
 {
@@ -161,7 +161,7 @@
 	cifs_fill_common_info(fattr, cifs_sb);
 }
 
-void
+static void
 cifs_std_info_to_fattr(struct cifs_fattr *fattr, FIND_FILE_STANDARD_INFO *info,
 		       struct cifs_sb_info *cifs_sb)
 {
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 1da4ab2..07b8e71 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -103,56 +103,6 @@
 	mempool_free(midEntry, cifs_mid_poolp);
 }
 
-struct oplock_q_entry *
-AllocOplockQEntry(struct inode *pinode, __u16 fid, struct cifsTconInfo *tcon)
-{
-	struct oplock_q_entry *temp;
-	if ((pinode == NULL) || (tcon == NULL)) {
-		cERROR(1, ("Null parms passed to AllocOplockQEntry"));
-		return NULL;
-	}
-	temp = (struct oplock_q_entry *) kmem_cache_alloc(cifs_oplock_cachep,
-						       GFP_KERNEL);
-	if (temp == NULL)
-		return temp;
-	else {
-		temp->pinode = pinode;
-		temp->tcon = tcon;
-		temp->netfid = fid;
-		spin_lock(&cifs_oplock_lock);
-		list_add_tail(&temp->qhead, &cifs_oplock_list);
-		spin_unlock(&cifs_oplock_lock);
-	}
-	return temp;
-}
-
-void DeleteOplockQEntry(struct oplock_q_entry *oplockEntry)
-{
-	spin_lock(&cifs_oplock_lock);
-    /* should we check if list empty first? */
-	list_del(&oplockEntry->qhead);
-	spin_unlock(&cifs_oplock_lock);
-	kmem_cache_free(cifs_oplock_cachep, oplockEntry);
-}
-
-
-void DeleteTconOplockQEntries(struct cifsTconInfo *tcon)
-{
-	struct oplock_q_entry *temp;
-
-	if (tcon == NULL)
-		return;
-
-	spin_lock(&cifs_oplock_lock);
-	list_for_each_entry(temp, &cifs_oplock_list, qhead) {
-		if ((temp->tcon) && (temp->tcon == tcon)) {
-			list_del(&temp->qhead);
-			kmem_cache_free(cifs_oplock_cachep, temp);
-		}
-	}
-	spin_unlock(&cifs_oplock_lock);
-}
-
 static int
 smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
 {
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
index 0c754e6..8aadb99 100644
--- a/fs/ecryptfs/Kconfig
+++ b/fs/ecryptfs/Kconfig
@@ -1,6 +1,8 @@
 config ECRYPT_FS
 	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+	depends on EXPERIMENTAL && KEYS && NET
+	select CRYPTO_ECB
+	select CRYPTO_CBC
 	help
 	  Encrypted filesystem that operates on the VFS layer.  See
 	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index b91851f..fbb6e5e 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -245,13 +245,11 @@
 		crypto_free_blkcipher(crypt_stat->tfm);
 	if (crypt_stat->hash_tfm)
 		crypto_free_hash(crypt_stat->hash_tfm);
-	mutex_lock(&crypt_stat->keysig_list_mutex);
 	list_for_each_entry_safe(key_sig, key_sig_tmp,
 				 &crypt_stat->keysig_list, crypt_stat_list) {
 		list_del(&key_sig->crypt_stat_list);
 		kmem_cache_free(ecryptfs_key_sig_cache, key_sig);
 	}
-	mutex_unlock(&crypt_stat->keysig_list_mutex);
 	memset(crypt_stat, 0, sizeof(struct ecryptfs_crypt_stat));
 }
 
@@ -511,13 +509,14 @@
 				  + extent_offset), crypt_stat);
 		rc = ecryptfs_write_lower(ecryptfs_inode, enc_extent_virt,
 					  offset, crypt_stat->extent_size);
-		if (rc) {
+		if (rc < 0) {
 			ecryptfs_printk(KERN_ERR, "Error attempting "
 					"to write lower page; rc = [%d]"
 					"\n", rc);
 			goto out;
 		}
 	}
+	rc = 0;
 out:
 	if (enc_extent_page) {
 		kunmap(enc_extent_page);
@@ -633,7 +632,7 @@
 		rc = ecryptfs_read_lower(enc_extent_virt, offset,
 					 crypt_stat->extent_size,
 					 ecryptfs_inode);
-		if (rc) {
+		if (rc < 0) {
 			ecryptfs_printk(KERN_ERR, "Error attempting "
 					"to read lower page; rc = [%d]"
 					"\n", rc);
@@ -797,6 +796,7 @@
 	kfree(full_alg_name);
 	if (IS_ERR(crypt_stat->tfm)) {
 		rc = PTR_ERR(crypt_stat->tfm);
+		crypt_stat->tfm = NULL;
 		ecryptfs_printk(KERN_ERR, "cryptfs: init_crypt_ctx(): "
 				"Error initializing cipher [%s]\n",
 				crypt_stat->cipher);
@@ -925,7 +925,9 @@
 	struct ecryptfs_global_auth_tok *global_auth_tok;
 	int rc = 0;
 
+	mutex_lock(&crypt_stat->keysig_list_mutex);
 	mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
 	list_for_each_entry(global_auth_tok,
 			    &mount_crypt_stat->global_auth_tok_list,
 			    mount_crypt_stat_list) {
@@ -934,13 +936,13 @@
 		rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
 		if (rc) {
 			printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
-			mutex_unlock(
-				&mount_crypt_stat->global_auth_tok_list_mutex);
 			goto out;
 		}
 	}
-	mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
 out:
+	mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+	mutex_unlock(&crypt_stat->keysig_list_mutex);
 	return rc;
 }
 
@@ -1212,14 +1214,15 @@
 		crypt_stat->extent_size = ECRYPTFS_DEFAULT_EXTENT_SIZE;
 	rc = ecryptfs_read_lower(data, 0, crypt_stat->extent_size,
 				 ecryptfs_inode);
-	if (rc) {
+	if (rc < 0) {
 		printk(KERN_ERR "%s: Error reading header region; rc = [%d]\n",
 		       __func__, rc);
 		goto out;
 	}
 	if (!contains_ecryptfs_marker(data + ECRYPTFS_FILE_SIZE_BYTES)) {
 		rc = -EINVAL;
-	}
+	} else
+		rc = 0;
 out:
 	return rc;
 }
@@ -1314,10 +1317,11 @@
 
 	rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
 				  0, virt_len);
-	if (rc)
+	if (rc < 0)
 		printk(KERN_ERR "%s: Error attempting to write header "
-		       "information to lower file; rc = [%d]\n", __func__,
-		       rc);
+		       "information to lower file; rc = [%d]\n", __func__, rc);
+	else
+		rc = 0;
 	return rc;
 }
 
@@ -1597,7 +1601,7 @@
 	}
 	rc = ecryptfs_read_lower(page_virt, 0, crypt_stat->extent_size,
 				 ecryptfs_inode);
-	if (!rc)
+	if (rc >= 0)
 		rc = ecryptfs_read_headers_virt(page_virt, crypt_stat,
 						ecryptfs_dentry,
 						ECRYPTFS_VALIDATE_HEADER_SIZE);
@@ -1702,7 +1706,7 @@
 	} else {
 		printk(KERN_ERR "%s: No support for requested filename "
 		       "encryption method in this release\n", __func__);
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 		goto out;
 	}
 out:
@@ -1763,7 +1767,7 @@
 	if (IS_ERR(*key_tfm)) {
 		rc = PTR_ERR(*key_tfm);
 		printk(KERN_ERR "Unable to allocate crypto cipher with name "
-		       "[%s]; rc = [%d]\n", cipher_name, rc);
+		       "[%s]; rc = [%d]\n", full_alg_name, rc);
 		goto out;
 	}
 	crypto_blkcipher_set_flags(*key_tfm, CRYPTO_TFM_REQ_WEAK_KEY);
@@ -1776,7 +1780,8 @@
 	rc = crypto_blkcipher_setkey(*key_tfm, dummy_key, *key_size);
 	if (rc) {
 		printk(KERN_ERR "Error attempting to set key of size [%zd] for "
-		       "cipher [%s]; rc = [%d]\n", *key_size, cipher_name, rc);
+		       "cipher [%s]; rc = [%d]\n", *key_size, full_alg_name,
+		       rc);
 		rc = -EINVAL;
 		goto out;
 	}
@@ -2166,7 +2171,7 @@
 			(*encoded_name)[(*encoded_name_size)] = '\0';
 			(*encoded_name_size)++;
 		} else {
-			rc = -ENOTSUPP;
+			rc = -EOPNOTSUPP;
 		}
 		if (rc) {
 			printk(KERN_ERR "%s: Error attempting to encode "
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 2f0945d..056fed62 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -476,6 +476,7 @@
 	struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
 	struct dentry *lower_dir_dentry;
 
+	dget(lower_dentry);
 	lower_dir_dentry = lock_parent(lower_dentry);
 	rc = vfs_unlink(lower_dir_inode, lower_dentry);
 	if (rc) {
@@ -489,6 +490,7 @@
 	d_drop(dentry);
 out_unlock:
 	unlock_dir(lower_dir_dentry);
+	dput(lower_dentry);
 	return rc;
 }
 
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 259525c..a0a7847 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -416,7 +416,9 @@
 			    &mount_crypt_stat->global_auth_tok_list,
 			    mount_crypt_stat_list) {
 		if (memcmp(walker->sig, sig, ECRYPTFS_SIG_SIZE_HEX) == 0) {
-			(*global_auth_tok) = walker;
+			rc = key_validate(walker->global_auth_tok_key);
+			if (!rc)
+				(*global_auth_tok) = walker;
 			goto out;
 		}
 	}
@@ -612,7 +614,12 @@
 	}
 	/* TODO: Support other key modules than passphrase for
 	 * filename encryption */
-	BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+	if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+		rc = -EOPNOTSUPP;
+		printk(KERN_INFO "%s: Filename encryption only supports "
+		       "password tokens\n", __func__);
+		goto out_free_unlock;
+	}
 	sg_init_one(
 		&s->hash_sg,
 		(u8 *)s->auth_tok->token.password.session_key_encryption_key,
@@ -910,7 +917,12 @@
 	}
 	/* TODO: Support other key modules than passphrase for
 	 * filename encryption */
-	BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+	if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+		rc = -EOPNOTSUPP;
+		printk(KERN_INFO "%s: Filename encryption only supports "
+		       "password tokens\n", __func__);
+		goto out_free_unlock;
+	}
 	rc = crypto_blkcipher_setkey(
 		s->desc.tfm,
 		s->auth_tok->token.password.session_key_encryption_key,
@@ -1316,8 +1328,10 @@
 		rc = -EINVAL;
 		goto out_free;
 	}
-	ecryptfs_cipher_code_to_string(crypt_stat->cipher,
-				       (u16)data[(*packet_size)]);
+	rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher,
+					    (u16)data[(*packet_size)]);
+	if (rc)
+		goto out_free;
 	/* A little extra work to differentiate among the AES key
 	 * sizes; see RFC2440 */
 	switch(data[(*packet_size)++]) {
@@ -1328,7 +1342,9 @@
 		crypt_stat->key_size =
 			(*new_auth_tok)->session_key.encrypted_key_size;
 	}
-	ecryptfs_init_crypt_ctx(crypt_stat);
+	rc = ecryptfs_init_crypt_ctx(crypt_stat);
+	if (rc)
+		goto out_free;
 	if (unlikely(data[(*packet_size)++] != 0x03)) {
 		printk(KERN_WARNING "Only S2K ID 3 is currently supported\n");
 		rc = -ENOSYS;
@@ -2366,21 +2382,18 @@
 int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig)
 {
 	struct ecryptfs_key_sig *new_key_sig;
-	int rc = 0;
 
 	new_key_sig = kmem_cache_alloc(ecryptfs_key_sig_cache, GFP_KERNEL);
 	if (!new_key_sig) {
-		rc = -ENOMEM;
 		printk(KERN_ERR
 		       "Error allocating from ecryptfs_key_sig_cache\n");
-		goto out;
+		return -ENOMEM;
 	}
 	memcpy(new_key_sig->keysig, sig, ECRYPTFS_SIG_SIZE_HEX);
-	mutex_lock(&crypt_stat->keysig_list_mutex);
+	/* Caller must hold keysig_list_mutex */
 	list_add(&new_key_sig->crypt_stat_list, &crypt_stat->keysig_list);
-	mutex_unlock(&crypt_stat->keysig_list_mutex);
-out:
-	return rc;
+
+	return 0;
 }
 
 struct kmem_cache *ecryptfs_global_auth_tok_cache;
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
index c6d7a4d..e14cf7e 100644
--- a/fs/ecryptfs/kthread.c
+++ b/fs/ecryptfs/kthread.c
@@ -136,6 +136,7 @@
 			     const struct cred *cred)
 {
 	struct ecryptfs_open_req *req;
+	int flags = O_LARGEFILE;
 	int rc = 0;
 
 	/* Corresponding dput() and mntput() are done when the
@@ -143,10 +144,14 @@
 	 * destroyed. */
 	dget(lower_dentry);
 	mntget(lower_mnt);
-	(*lower_file) = dentry_open(lower_dentry, lower_mnt,
-				    (O_RDWR | O_LARGEFILE), cred);
+	flags |= IS_RDONLY(lower_dentry->d_inode) ? O_RDONLY : O_RDWR;
+	(*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
 	if (!IS_ERR(*lower_file))
 		goto out;
+	if (flags & O_RDONLY) {
+		rc = PTR_ERR((*lower_file));
+		goto out;
+	}
 	req = kmem_cache_alloc(ecryptfs_open_req_cache, GFP_KERNEL);
 	if (!req) {
 		rc = -ENOMEM;
@@ -180,21 +185,8 @@
 		       __func__);
 		goto out_unlock;
 	}
-	if (IS_ERR(*req->lower_file)) {
+	if (IS_ERR(*req->lower_file))
 		rc = PTR_ERR(*req->lower_file);
-		dget(lower_dentry);
-		mntget(lower_mnt);
-		(*lower_file) = dentry_open(lower_dentry, lower_mnt,
-					    (O_RDONLY | O_LARGEFILE), cred);
-		if (IS_ERR(*lower_file)) {
-			rc = PTR_ERR(*req->lower_file);
-			(*lower_file) = NULL;
-			printk(KERN_WARNING "%s: Error attempting privileged "
-			       "open of lower file with either RW or RO "
-			       "perms; rc = [%d]. Giving up.\n",
-			       __func__, rc);
-		}
-	}
 out_unlock:
 	mutex_unlock(&req->mux);
 out_free:
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 9f0aa98..101fe4c 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -129,11 +129,10 @@
 		lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
 		rc = ecryptfs_privileged_open(&inode_info->lower_file,
 					      lower_dentry, lower_mnt, cred);
-		if (rc || IS_ERR(inode_info->lower_file)) {
+		if (rc) {
 			printk(KERN_ERR "Error opening lower persistent file "
 			       "for lower_dentry [0x%p] and lower_mnt [0x%p]; "
 			       "rc = [%d]\n", lower_dentry, lower_mnt, rc);
-			rc = PTR_ERR(inode_info->lower_file);
 			inode_info->lower_file = NULL;
 		}
 	}
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index 05772ae..df4ce99 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -396,9 +396,11 @@
 	rc = ecryptfs_write_lower(ecryptfs_inode, file_size_virt, 0,
 				  sizeof(u64));
 	kfree(file_size_virt);
-	if (rc)
+	if (rc < 0)
 		printk(KERN_ERR "%s: Error writing file size to header; "
 		       "rc = [%d]\n", __func__, rc);
+	else
+		rc = 0;
 out:
 	return rc;
 }
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index a137c6e..0cc4faf 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -34,15 +34,14 @@
  *
  * Write data to the lower file.
  *
- * Returns zero on success; non-zero on error
+ * Returns bytes written on success; less than zero on error
  */
 int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
 			 loff_t offset, size_t size)
 {
 	struct ecryptfs_inode_info *inode_info;
-	ssize_t octets_written;
 	mm_segment_t fs_save;
-	int rc = 0;
+	ssize_t rc;
 
 	inode_info = ecryptfs_inode_to_private(ecryptfs_inode);
 	mutex_lock(&inode_info->lower_file_mutex);
@@ -50,14 +49,9 @@
 	inode_info->lower_file->f_pos = offset;
 	fs_save = get_fs();
 	set_fs(get_ds());
-	octets_written = vfs_write(inode_info->lower_file, data, size,
-				   &inode_info->lower_file->f_pos);
+	rc = vfs_write(inode_info->lower_file, data, size,
+		       &inode_info->lower_file->f_pos);
 	set_fs(fs_save);
-	if (octets_written < 0) {
-		printk(KERN_ERR "%s: octets_written = [%td]; "
-		       "expected [%td]\n", __func__, octets_written, size);
-		rc = -EINVAL;
-	}
 	mutex_unlock(&inode_info->lower_file_mutex);
 	mark_inode_dirty_sync(ecryptfs_inode);
 	return rc;
@@ -91,6 +85,8 @@
 		  + offset_in_page);
 	virt = kmap(page_for_lower);
 	rc = ecryptfs_write_lower(ecryptfs_inode, virt, offset, size);
+	if (rc > 0)
+		rc = 0;
 	kunmap(page_for_lower);
 	return rc;
 }
@@ -229,30 +225,24 @@
  * Read @size bytes of data at byte offset @offset from the lower
  * inode into memory location @data.
  *
- * Returns zero on success; non-zero on error
+ * Returns bytes read on success; 0 on EOF; less than zero on error
  */
 int ecryptfs_read_lower(char *data, loff_t offset, size_t size,
 			struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_inode_info *inode_info =
 		ecryptfs_inode_to_private(ecryptfs_inode);
-	ssize_t octets_read;
 	mm_segment_t fs_save;
-	int rc = 0;
+	ssize_t rc;
 
 	mutex_lock(&inode_info->lower_file_mutex);
 	BUG_ON(!inode_info->lower_file);
 	inode_info->lower_file->f_pos = offset;
 	fs_save = get_fs();
 	set_fs(get_ds());
-	octets_read = vfs_read(inode_info->lower_file, data, size,
-			       &inode_info->lower_file->f_pos);
+	rc = vfs_read(inode_info->lower_file, data, size,
+		      &inode_info->lower_file->f_pos);
 	set_fs(fs_save);
-	if (octets_read < 0) {
-		printk(KERN_ERR "%s: octets_read = [%td]; "
-		       "expected [%td]\n", __func__, octets_read, size);
-		rc = -EINVAL;
-	}
 	mutex_unlock(&inode_info->lower_file_mutex);
 	return rc;
 }
@@ -284,6 +274,8 @@
 	offset = ((((loff_t)page_index) << PAGE_CACHE_SHIFT) + offset_in_page);
 	virt = kmap(page_for_ecryptfs);
 	rc = ecryptfs_read_lower(virt, offset, size, ecryptfs_inode);
+	if (rc > 0)
+		rc = 0;
 	kunmap(page_for_ecryptfs);
 	flush_dcache_page(page_for_ecryptfs);
 	return rc;
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 12d6496..b15a43a 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -77,7 +77,6 @@
 	struct ecryptfs_inode_info *inode_info;
 
 	inode_info = ecryptfs_inode_to_private(inode);
-	mutex_lock(&inode_info->lower_file_mutex);
 	if (inode_info->lower_file) {
 		struct dentry *lower_dentry =
 			inode_info->lower_file->f_dentry;
@@ -89,7 +88,6 @@
 			d_drop(lower_dentry);
 		}
 	}
-	mutex_unlock(&inode_info->lower_file_mutex);
 	ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
 	kmem_cache_free(ecryptfs_inode_info_cache, inode_info);
 }
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index e227eea..984ca0c 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -65,6 +65,12 @@
 /* data type for block group number */
 typedef unsigned int ext4_group_t;
 
+/*
+ * Flags used in mballoc's allocation_context flags field.  
+ *
+ * Also used to show what's going on for debugging purposes when the
+ * flag field is exported via the traceport interface
+ */
 
 /* prefer goal again. length */
 #define EXT4_MB_HINT_MERGE		0x0001
@@ -127,6 +133,16 @@
 	int pages_written;
 	int retval;
 };
+#define	DIO_AIO_UNWRITTEN	0x1
+typedef struct ext4_io_end {
+	struct list_head	list;		/* per-file finished AIO list */
+	struct inode		*inode;		/* file being written to */
+	unsigned int		flag;		/* unwritten or not */
+	int			error;		/* I/O error code */
+	ext4_lblk_t		offset;		/* offset in the file */
+	size_t			size;		/* size of the extent */
+	struct work_struct	work;		/* data work queue */
+} ext4_io_end_t;
 
 /*
  * Special inodes numbers
@@ -347,7 +363,16 @@
 	/* Call ext4_da_update_reserve_space() after successfully 
 	   allocating the blocks */
 #define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE	0x0008
-
+	/* caller is from the direct IO path, request to creation of an
+	unitialized extents if not allocated, split the uninitialized
+	extent if blocks has been preallocated already*/
+#define EXT4_GET_BLOCKS_DIO			0x0010
+#define EXT4_GET_BLOCKS_CONVERT			0x0020
+#define EXT4_GET_BLOCKS_DIO_CREATE_EXT		(EXT4_GET_BLOCKS_DIO|\
+					 EXT4_GET_BLOCKS_CREATE_UNINIT_EXT)
+	/* Convert extent to initialized after direct IO complete */
+#define EXT4_GET_BLOCKS_DIO_CONVERT_EXT		(EXT4_GET_BLOCKS_CONVERT|\
+					 EXT4_GET_BLOCKS_DIO_CREATE_EXT)
 
 /*
  * ioctl commands
@@ -500,8 +525,8 @@
 static inline __le32 ext4_encode_extra_time(struct timespec *time)
 {
        return cpu_to_le32((sizeof(time->tv_sec) > 4 ?
-			   time->tv_sec >> 32 : 0) |
-			   ((time->tv_nsec << 2) & EXT4_NSEC_MASK));
+			   (time->tv_sec >> 32) & EXT4_EPOCH_MASK : 0) |
+                          ((time->tv_nsec << EXT4_EPOCH_BITS) & EXT4_NSEC_MASK));
 }
 
 static inline void ext4_decode_extra_time(struct timespec *time, __le32 extra)
@@ -509,7 +534,7 @@
        if (sizeof(time->tv_sec) > 4)
 	       time->tv_sec |= (__u64)(le32_to_cpu(extra) & EXT4_EPOCH_MASK)
 			       << 32;
-       time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> 2;
+       time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> EXT4_EPOCH_BITS;
 }
 
 #define EXT4_INODE_SET_XTIME(xtime, inode, raw_inode)			       \
@@ -672,6 +697,11 @@
 	__u16 i_extra_isize;
 
 	spinlock_t i_block_reservation_lock;
+
+	/* completed async DIOs that might need unwritten extents handling */
+	struct list_head i_aio_dio_complete_list;
+	/* current io_end structure for async DIO write*/
+	ext4_io_end_t *cur_aio_dio;
 };
 
 /*
@@ -942,18 +972,11 @@
 	unsigned int s_mb_stats;
 	unsigned int s_mb_order2_reqs;
 	unsigned int s_mb_group_prealloc;
+	unsigned int s_max_writeback_mb_bump;
 	/* where last allocation was done - for stream allocation */
 	unsigned long s_mb_last_group;
 	unsigned long s_mb_last_start;
 
-	/* history to debug policy */
-	struct ext4_mb_history *s_mb_history;
-	int s_mb_history_cur;
-	int s_mb_history_max;
-	int s_mb_history_num;
-	spinlock_t s_mb_history_lock;
-	int s_mb_history_filter;
-
 	/* stats for buddy allocator */
 	spinlock_t s_mb_pa_lock;
 	atomic_t s_bal_reqs;	/* number of reqs with len > 1 */
@@ -980,6 +1003,9 @@
 
 	unsigned int s_log_groups_per_flex;
 	struct flex_groups *s_flex_groups;
+
+	/* workqueue for dio unwritten */
+	struct workqueue_struct *dio_unwritten_wq;
 };
 
 static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb)
@@ -1397,7 +1423,7 @@
 		struct address_space *mapping, loff_t from);
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
 extern qsize_t ext4_get_reserved_space(struct inode *inode);
-
+extern int flush_aio_dio_completed_IO(struct inode *inode);
 /* ioctl.c */
 extern long ext4_ioctl(struct file *, unsigned int, unsigned long);
 extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
@@ -1699,6 +1725,8 @@
 extern void ext4_ext_release(struct super_block *);
 extern long ext4_fallocate(struct inode *inode, int mode, loff_t offset,
 			  loff_t len);
+extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+			  loff_t len);
 extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
 			   sector_t block, unsigned int max_blocks,
 			   struct buffer_head *bh, int flags);
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 61652f1..2ca6864 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -220,6 +220,11 @@
 		(le16_to_cpu(ext->ee_len) - EXT_INIT_MAX_LEN));
 }
 
+static inline void ext4_ext_mark_initialized(struct ext4_extent *ext)
+{
+	ext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ext));
+}
+
 extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
 extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex);
 extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
@@ -235,7 +240,7 @@
 				 struct ext4_ext_path *path,
 				 struct ext4_extent *);
 extern unsigned int ext4_ext_check_overlap(struct inode *, struct ext4_extent *, struct ext4_ext_path *);
-extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *);
+extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *, int);
 extern int ext4_ext_walk_space(struct inode *, ext4_lblk_t, ext4_lblk_t,
 							ext_prepare_callback, void *);
 extern struct ext4_ext_path *ext4_ext_find_extent(struct inode *, ext4_lblk_t,
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index 139fb8c..a286598 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -161,11 +161,13 @@
 handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks);
 int __ext4_journal_stop(const char *where, handle_t *handle);
 
-#define EXT4_NOJOURNAL_HANDLE	((handle_t *) 0x1)
+#define EXT4_NOJOURNAL_MAX_REF_COUNT ((unsigned long) 4096)
 
+/* Note:  Do not use this for NULL handles.  This is only to determine if
+ * a properly allocated handle is using a journal or not. */
 static inline int ext4_handle_valid(handle_t *handle)
 {
-	if (handle == EXT4_NOJOURNAL_HANDLE)
+	if ((unsigned long)handle < EXT4_NOJOURNAL_MAX_REF_COUNT)
 		return 0;
 	return 1;
 }
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 7a38325..10539e3 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -723,7 +723,7 @@
  * insert new index [@logical;@ptr] into the block at @curp;
  * check where to insert: before @curp or after @curp
  */
-static int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
+int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
 				struct ext4_ext_path *curp,
 				int logical, ext4_fsblk_t ptr)
 {
@@ -1586,7 +1586,7 @@
  */
 int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
 				struct ext4_ext_path *path,
-				struct ext4_extent *newext)
+				struct ext4_extent *newext, int flag)
 {
 	struct ext4_extent_header *eh;
 	struct ext4_extent *ex, *fex;
@@ -1602,7 +1602,8 @@
 	BUG_ON(path[depth].p_hdr == NULL);
 
 	/* try to insert block into found extent and return */
-	if (ex && ext4_can_extents_be_merged(inode, ex, newext)) {
+	if (ex && (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+		&& ext4_can_extents_be_merged(inode, ex, newext)) {
 		ext_debug("append [%d]%d block to %d:[%d]%d (from %llu)\n",
 				ext4_ext_is_uninitialized(newext),
 				ext4_ext_get_actual_len(newext),
@@ -1722,7 +1723,8 @@
 
 merge:
 	/* try to merge extents to the right */
-	ext4_ext_try_to_merge(inode, path, nearex);
+	if (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+		ext4_ext_try_to_merge(inode, path, nearex);
 
 	/* try to merge extents to the left */
 
@@ -2378,6 +2380,7 @@
 	 */
 
 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+#if defined(AGGRESSIVE_TEST) || defined(CHECK_BINSEARCH) || defined(EXTENTS_STATS)
 		printk(KERN_INFO "EXT4-fs: file extents enabled");
 #ifdef AGGRESSIVE_TEST
 		printk(", aggressive tests");
@@ -2389,6 +2392,7 @@
 		printk(", stats");
 #endif
 		printk("\n");
+#endif
 #ifdef EXTENTS_STATS
 		spin_lock_init(&EXT4_SB(sb)->s_ext_stats_lock);
 		EXT4_SB(sb)->s_ext_min = 1 << 30;
@@ -2490,7 +2494,6 @@
 }
 
 #define EXT4_EXT_ZERO_LEN 7
-
 /*
  * This function is called by ext4_ext_get_blocks() if someone tries to write
  * to an uninitialized extent. It may result in splitting the uninitialized
@@ -2583,7 +2586,8 @@
 			ex3->ee_block = cpu_to_le32(iblock);
 			ext4_ext_store_pblock(ex3, newblock);
 			ex3->ee_len = cpu_to_le16(allocated);
-			err = ext4_ext_insert_extent(handle, inode, path, ex3);
+			err = ext4_ext_insert_extent(handle, inode, path,
+							ex3, 0);
 			if (err == -ENOSPC) {
 				err =  ext4_ext_zeroout(inode, &orig_ex);
 				if (err)
@@ -2639,7 +2643,7 @@
 		ext4_ext_store_pblock(ex3, newblock + max_blocks);
 		ex3->ee_len = cpu_to_le16(allocated - max_blocks);
 		ext4_ext_mark_uninitialized(ex3);
-		err = ext4_ext_insert_extent(handle, inode, path, ex3);
+		err = ext4_ext_insert_extent(handle, inode, path, ex3, 0);
 		if (err == -ENOSPC) {
 			err =  ext4_ext_zeroout(inode, &orig_ex);
 			if (err)
@@ -2757,7 +2761,7 @@
 	err = ext4_ext_dirty(handle, inode, path + depth);
 	goto out;
 insert:
-	err = ext4_ext_insert_extent(handle, inode, path, &newex);
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, 0);
 	if (err == -ENOSPC) {
 		err =  ext4_ext_zeroout(inode, &orig_ex);
 		if (err)
@@ -2785,6 +2789,324 @@
 }
 
 /*
+ * This function is called by ext4_ext_get_blocks() from
+ * ext4_get_blocks_dio_write() when DIO to write
+ * to an uninitialized extent.
+ *
+ * Writing to an uninitized extent may result in splitting the uninitialized
+ * extent into multiple /intialized unintialized extents (up to three)
+ * There are three possibilities:
+ *   a> There is no split required: Entire extent should be uninitialized
+ *   b> Splits in two extents: Write is happening at either end of the extent
+ *   c> Splits in three extents: Somone is writing in middle of the extent
+ *
+ * One of more index blocks maybe needed if the extent tree grow after
+ * the unintialized extent split. To prevent ENOSPC occur at the IO
+ * complete, we need to split the uninitialized extent before DIO submit
+ * the IO. The uninitilized extent called at this time will be split
+ * into three uninitialized extent(at most). After IO complete, the part
+ * being filled will be convert to initialized by the end_io callback function
+ * via ext4_convert_unwritten_extents().
+ */
+static int ext4_split_unwritten_extents(handle_t *handle,
+					struct inode *inode,
+					struct ext4_ext_path *path,
+					ext4_lblk_t iblock,
+					unsigned int max_blocks,
+					int flags)
+{
+	struct ext4_extent *ex, newex, orig_ex;
+	struct ext4_extent *ex1 = NULL;
+	struct ext4_extent *ex2 = NULL;
+	struct ext4_extent *ex3 = NULL;
+	struct ext4_extent_header *eh;
+	ext4_lblk_t ee_block;
+	unsigned int allocated, ee_len, depth;
+	ext4_fsblk_t newblock;
+	int err = 0;
+	int ret = 0;
+
+	ext_debug("ext4_split_unwritten_extents: inode %lu,"
+		  "iblock %llu, max_blocks %u\n", inode->i_ino,
+		  (unsigned long long)iblock, max_blocks);
+	depth = ext_depth(inode);
+	eh = path[depth].p_hdr;
+	ex = path[depth].p_ext;
+	ee_block = le32_to_cpu(ex->ee_block);
+	ee_len = ext4_ext_get_actual_len(ex);
+	allocated = ee_len - (iblock - ee_block);
+	newblock = iblock - ee_block + ext_pblock(ex);
+	ex2 = ex;
+	orig_ex.ee_block = ex->ee_block;
+	orig_ex.ee_len   = cpu_to_le16(ee_len);
+	ext4_ext_store_pblock(&orig_ex, ext_pblock(ex));
+
+	/*
+ 	 * if the entire unintialized extent length less than
+ 	 * the size of extent to write, there is no need to split
+ 	 * uninitialized extent
+ 	 */
+ 	if (allocated <= max_blocks)
+		return ret;
+
+	err = ext4_ext_get_access(handle, inode, path + depth);
+	if (err)
+		goto out;
+	/* ex1: ee_block to iblock - 1 : uninitialized */
+	if (iblock > ee_block) {
+		ex1 = ex;
+		ex1->ee_len = cpu_to_le16(iblock - ee_block);
+		ext4_ext_mark_uninitialized(ex1);
+		ex2 = &newex;
+	}
+	/*
+	 * for sanity, update the length of the ex2 extent before
+	 * we insert ex3, if ex1 is NULL. This is to avoid temporary
+	 * overlap of blocks.
+	 */
+	if (!ex1 && allocated > max_blocks)
+		ex2->ee_len = cpu_to_le16(max_blocks);
+	/* ex3: to ee_block + ee_len : uninitialised */
+	if (allocated > max_blocks) {
+		unsigned int newdepth;
+		ex3 = &newex;
+		ex3->ee_block = cpu_to_le32(iblock + max_blocks);
+		ext4_ext_store_pblock(ex3, newblock + max_blocks);
+		ex3->ee_len = cpu_to_le16(allocated - max_blocks);
+		ext4_ext_mark_uninitialized(ex3);
+		err = ext4_ext_insert_extent(handle, inode, path, ex3, flags);
+		if (err == -ENOSPC) {
+			err =  ext4_ext_zeroout(inode, &orig_ex);
+			if (err)
+				goto fix_extent_len;
+			/* update the extent length and mark as initialized */
+			ex->ee_block = orig_ex.ee_block;
+			ex->ee_len   = orig_ex.ee_len;
+			ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+			ext4_ext_dirty(handle, inode, path + depth);
+			/* zeroed the full extent */
+			/* blocks available from iblock */
+			return allocated;
+
+		} else if (err)
+			goto fix_extent_len;
+		/*
+		 * The depth, and hence eh & ex might change
+		 * as part of the insert above.
+		 */
+		newdepth = ext_depth(inode);
+		/*
+		 * update the extent length after successful insert of the
+		 * split extent
+		 */
+		orig_ex.ee_len = cpu_to_le16(ee_len -
+						ext4_ext_get_actual_len(ex3));
+		depth = newdepth;
+		ext4_ext_drop_refs(path);
+		path = ext4_ext_find_extent(inode, iblock, path);
+		if (IS_ERR(path)) {
+			err = PTR_ERR(path);
+			goto out;
+		}
+		eh = path[depth].p_hdr;
+		ex = path[depth].p_ext;
+		if (ex2 != &newex)
+			ex2 = ex;
+
+		err = ext4_ext_get_access(handle, inode, path + depth);
+		if (err)
+			goto out;
+
+		allocated = max_blocks;
+	}
+	/*
+	 * If there was a change of depth as part of the
+	 * insertion of ex3 above, we need to update the length
+	 * of the ex1 extent again here
+	 */
+	if (ex1 && ex1 != ex) {
+		ex1 = ex;
+		ex1->ee_len = cpu_to_le16(iblock - ee_block);
+		ext4_ext_mark_uninitialized(ex1);
+		ex2 = &newex;
+	}
+	/*
+	 * ex2: iblock to iblock + maxblocks-1 : to be direct IO written,
+	 * uninitialised still.
+	 */
+	ex2->ee_block = cpu_to_le32(iblock);
+	ext4_ext_store_pblock(ex2, newblock);
+	ex2->ee_len = cpu_to_le16(allocated);
+	ext4_ext_mark_uninitialized(ex2);
+	if (ex2 != ex)
+		goto insert;
+	/* Mark modified extent as dirty */
+	err = ext4_ext_dirty(handle, inode, path + depth);
+	ext_debug("out here\n");
+	goto out;
+insert:
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
+	if (err == -ENOSPC) {
+		err =  ext4_ext_zeroout(inode, &orig_ex);
+		if (err)
+			goto fix_extent_len;
+		/* update the extent length and mark as initialized */
+		ex->ee_block = orig_ex.ee_block;
+		ex->ee_len   = orig_ex.ee_len;
+		ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+		ext4_ext_dirty(handle, inode, path + depth);
+		/* zero out the first half */
+		return allocated;
+	} else if (err)
+		goto fix_extent_len;
+out:
+	ext4_ext_show_leaf(inode, path);
+	return err ? err : allocated;
+
+fix_extent_len:
+	ex->ee_block = orig_ex.ee_block;
+	ex->ee_len   = orig_ex.ee_len;
+	ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+	ext4_ext_mark_uninitialized(ex);
+	ext4_ext_dirty(handle, inode, path + depth);
+	return err;
+}
+static int ext4_convert_unwritten_extents_dio(handle_t *handle,
+					      struct inode *inode,
+					      struct ext4_ext_path *path)
+{
+	struct ext4_extent *ex;
+	struct ext4_extent_header *eh;
+	int depth;
+	int err = 0;
+	int ret = 0;
+
+	depth = ext_depth(inode);
+	eh = path[depth].p_hdr;
+	ex = path[depth].p_ext;
+
+	err = ext4_ext_get_access(handle, inode, path + depth);
+	if (err)
+		goto out;
+	/* first mark the extent as initialized */
+	ext4_ext_mark_initialized(ex);
+
+	/*
+	 * We have to see if it can be merged with the extent
+	 * on the left.
+	 */
+	if (ex > EXT_FIRST_EXTENT(eh)) {
+		/*
+		 * To merge left, pass "ex - 1" to try_to_merge(),
+		 * since it merges towards right _only_.
+		 */
+		ret = ext4_ext_try_to_merge(inode, path, ex - 1);
+		if (ret) {
+			err = ext4_ext_correct_indexes(handle, inode, path);
+			if (err)
+				goto out;
+			depth = ext_depth(inode);
+			ex--;
+		}
+	}
+	/*
+	 * Try to Merge towards right.
+	 */
+	ret = ext4_ext_try_to_merge(inode, path, ex);
+	if (ret) {
+		err = ext4_ext_correct_indexes(handle, inode, path);
+		if (err)
+			goto out;
+		depth = ext_depth(inode);
+	}
+	/* Mark modified extent as dirty */
+	err = ext4_ext_dirty(handle, inode, path + depth);
+out:
+	ext4_ext_show_leaf(inode, path);
+	return err;
+}
+
+static int
+ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
+			ext4_lblk_t iblock, unsigned int max_blocks,
+			struct ext4_ext_path *path, int flags,
+			unsigned int allocated, struct buffer_head *bh_result,
+			ext4_fsblk_t newblock)
+{
+	int ret = 0;
+	int err = 0;
+	ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
+
+	ext_debug("ext4_ext_handle_uninitialized_extents: inode %lu, logical"
+		  "block %llu, max_blocks %u, flags %d, allocated %u",
+		  inode->i_ino, (unsigned long long)iblock, max_blocks,
+		  flags, allocated);
+	ext4_ext_show_leaf(inode, path);
+
+	/* DIO get_block() before submit the IO, split the extent */
+	if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) {
+		ret = ext4_split_unwritten_extents(handle,
+						inode, path, iblock,
+						max_blocks, flags);
+		/* flag the io_end struct that we need convert when IO done */
+		if (io)
+			io->flag = DIO_AIO_UNWRITTEN;
+		goto out;
+	}
+	/* DIO end_io complete, convert the filled extent to written */
+	if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) {
+		ret = ext4_convert_unwritten_extents_dio(handle, inode,
+							path);
+		goto out2;
+	}
+	/* buffered IO case */
+	/*
+	 * repeat fallocate creation request
+	 * we already have an unwritten extent
+	 */
+	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
+		goto map_out;
+
+	/* buffered READ or buffered write_begin() lookup */
+	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
+		/*
+		 * We have blocks reserved already.  We
+		 * return allocated blocks so that delalloc
+		 * won't do block reservation for us.  But
+		 * the buffer head will be unmapped so that
+		 * a read from the block returns 0s.
+		 */
+		set_buffer_unwritten(bh_result);
+		goto out1;
+	}
+
+	/* buffered write, writepage time, convert*/
+	ret = ext4_ext_convert_to_initialized(handle, inode,
+						path, iblock,
+						max_blocks);
+out:
+	if (ret <= 0) {
+		err = ret;
+		goto out2;
+	} else
+		allocated = ret;
+	set_buffer_new(bh_result);
+map_out:
+	set_buffer_mapped(bh_result);
+out1:
+	if (allocated > max_blocks)
+		allocated = max_blocks;
+	ext4_ext_show_leaf(inode, path);
+	bh_result->b_bdev = inode->i_sb->s_bdev;
+	bh_result->b_blocknr = newblock;
+out2:
+	if (path) {
+		ext4_ext_drop_refs(path);
+		kfree(path);
+	}
+	return err ? err : allocated;
+}
+/*
  * Block allocation/map/preallocation routine for extents based files
  *
  *
@@ -2814,6 +3136,7 @@
 	int err = 0, depth, ret, cache_type;
 	unsigned int allocated = 0;
 	struct ext4_allocation_request ar;
+	ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
 
 	__clear_bit(BH_New, &bh_result->b_state);
 	ext_debug("blocks %u/%u requested for inode %lu\n",
@@ -2889,33 +3212,10 @@
 							EXT4_EXT_CACHE_EXTENT);
 				goto out;
 			}
-			if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
-				goto out;
-			if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
-				if (allocated > max_blocks)
-					allocated = max_blocks;
-				/*
-				 * We have blocks reserved already.  We
-				 * return allocated blocks so that delalloc
-				 * won't do block reservation for us.  But
-				 * the buffer head will be unmapped so that
-				 * a read from the block returns 0s.
-				 */
-				set_buffer_unwritten(bh_result);
-				bh_result->b_bdev = inode->i_sb->s_bdev;
-				bh_result->b_blocknr = newblock;
-				goto out2;
-			}
-
-			ret = ext4_ext_convert_to_initialized(handle, inode,
-								path, iblock,
-								max_blocks);
-			if (ret <= 0) {
-				err = ret;
-				goto out2;
-			} else
-				allocated = ret;
-			goto outnew;
+			ret = ext4_ext_handle_uninitialized_extents(handle,
+					inode, iblock, max_blocks, path,
+					flags, allocated, bh_result, newblock);
+			return ret;
 		}
 	}
 
@@ -2986,9 +3286,21 @@
 	/* try to insert new extent into found leaf and return */
 	ext4_ext_store_pblock(&newex, newblock);
 	newex.ee_len = cpu_to_le16(ar.len);
-	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)  /* Mark uninitialized */
+	/* Mark uninitialized */
+	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT){
 		ext4_ext_mark_uninitialized(&newex);
-	err = ext4_ext_insert_extent(handle, inode, path, &newex);
+		/*
+		 * io_end structure was created for every async
+		 * direct IO write to the middle of the file.
+		 * To avoid unecessary convertion for every aio dio rewrite
+		 * to the mid of file, here we flag the IO that is really
+		 * need the convertion.
+		 *
+		 */
+		if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+			io->flag = DIO_AIO_UNWRITTEN;
+	}
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
 	if (err) {
 		/* free data blocks we just allocated */
 		/* not a good idea to call discard here directly,
@@ -3002,7 +3314,6 @@
 	/* previous routine could use block we allocated */
 	newblock = ext_pblock(&newex);
 	allocated = ext4_ext_get_actual_len(&newex);
-outnew:
 	set_buffer_new(bh_result);
 
 	/* Cache only when it is _not_ an uninitialized extent */
@@ -3201,6 +3512,63 @@
 }
 
 /*
+ * This function convert a range of blocks to written extents
+ * The caller of this function will pass the start offset and the size.
+ * all unwritten extents within this range will be converted to
+ * written extents.
+ *
+ * This function is called from the direct IO end io call back
+ * function, to convert the fallocated extents after IO is completed.
+ */
+int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+				    loff_t len)
+{
+	handle_t *handle;
+	ext4_lblk_t block;
+	unsigned int max_blocks;
+	int ret = 0;
+	int ret2 = 0;
+	struct buffer_head map_bh;
+	unsigned int credits, blkbits = inode->i_blkbits;
+
+	block = offset >> blkbits;
+	/*
+	 * We can't just convert len to max_blocks because
+	 * If blocksize = 4096 offset = 3072 and len = 2048
+	 */
+	max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
+							- block;
+	/*
+	 * credits to insert 1 extent into extent tree
+	 */
+	credits = ext4_chunk_trans_blocks(inode, max_blocks);
+	while (ret >= 0 && ret < max_blocks) {
+		block = block + ret;
+		max_blocks = max_blocks - ret;
+		handle = ext4_journal_start(inode, credits);
+		if (IS_ERR(handle)) {
+			ret = PTR_ERR(handle);
+			break;
+		}
+		map_bh.b_state = 0;
+		ret = ext4_get_blocks(handle, inode, block,
+				      max_blocks, &map_bh,
+				      EXT4_GET_BLOCKS_DIO_CONVERT_EXT);
+		if (ret <= 0) {
+			WARN_ON(ret <= 0);
+			printk(KERN_ERR "%s: ext4_ext_get_blocks "
+				    "returned error inode#%lu, block=%u, "
+				    "max_blocks=%u", __func__,
+				    inode->i_ino, block, max_blocks);
+		}
+		ext4_mark_inode_dirty(handle, inode);
+		ret2 = ext4_journal_stop(handle);
+		if (ret <= 0 || ret2 )
+			break;
+	}
+	return ret > 0 ? ret2 : ret;
+}
+/*
  * Callback function called for each extent to gather FIEMAP information.
  */
 static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path,
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 5ca3eca..9630583 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -81,7 +81,7 @@
 	return generic_file_aio_write(iocb, iov, nr_segs, pos);
 }
 
-static struct vm_operations_struct ext4_file_vm_ops = {
+static const struct vm_operations_struct ext4_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite   = ext4_page_mkwrite,
 };
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 0747574..2b15312 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -44,6 +44,8 @@
  *
  * What we do is just kick off a commit and wait on it.  This will snapshot the
  * inode to disk.
+ *
+ * i_mutex lock is held when entering and exiting this function
  */
 
 int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
@@ -56,6 +58,9 @@
 
 	trace_ext4_sync_file(file, dentry, datasync);
 
+	ret = flush_aio_dio_completed_IO(inode);
+	if (ret < 0)
+		goto out;
 	/*
 	 * data=writeback:
 	 *  The caller's filemap_fdatawrite()/wait will sync the data.
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 064746f..ec367bc 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -37,6 +37,7 @@
 #include <linux/namei.h>
 #include <linux/uio.h>
 #include <linux/bio.h>
+#include <linux/workqueue.h>
 
 #include "ext4_jbd2.h"
 #include "xattr.h"
@@ -1145,6 +1146,64 @@
 }
 
 /*
+ * Return the number of dirty pages in the given inode starting at
+ * page frame idx.
+ */
+static pgoff_t ext4_num_dirty_pages(struct inode *inode, pgoff_t idx,
+				    unsigned int max_pages)
+{
+	struct address_space *mapping = inode->i_mapping;
+	pgoff_t	index;
+	struct pagevec pvec;
+	pgoff_t num = 0;
+	int i, nr_pages, done = 0;
+
+	if (max_pages == 0)
+		return 0;
+	pagevec_init(&pvec, 0);
+	while (!done) {
+		index = idx;
+		nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
+					      PAGECACHE_TAG_DIRTY,
+					      (pgoff_t)PAGEVEC_SIZE);
+		if (nr_pages == 0)
+			break;
+		for (i = 0; i < nr_pages; i++) {
+			struct page *page = pvec.pages[i];
+			struct buffer_head *bh, *head;
+
+			lock_page(page);
+			if (unlikely(page->mapping != mapping) ||
+			    !PageDirty(page) ||
+			    PageWriteback(page) ||
+			    page->index != idx) {
+				done = 1;
+				unlock_page(page);
+				break;
+			}
+			head = page_buffers(page);
+			bh = head;
+			do {
+				if (!buffer_delay(bh) &&
+				    !buffer_unwritten(bh)) {
+					done = 1;
+					break;
+				}
+			} while ((bh = bh->b_this_page) != head);
+			unlock_page(page);
+			if (done)
+				break;
+			idx++;
+			num++;
+			if (num >= max_pages)
+				break;
+		}
+		pagevec_release(&pvec);
+	}
+	return num;
+}
+
+/*
  * The ext4_get_blocks() function tries to look up the requested blocks,
  * and returns if the blocks are already mapped.
  *
@@ -1175,6 +1234,9 @@
 	clear_buffer_mapped(bh);
 	clear_buffer_unwritten(bh);
 
+	ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u,"
+		  "logical block %lu\n", inode->i_ino, flags, max_blocks,
+		  (unsigned long)block);
 	/*
 	 * Try to see if we can get the block without requesting a new
 	 * file system block.
@@ -1796,11 +1858,11 @@
 
 	if (ext4_claim_free_blocks(sbi, total)) {
 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+		vfs_dq_release_reservation_block(inode, total);
 		if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
 			yield();
 			goto repeat;
 		}
-		vfs_dq_release_reservation_block(inode, total);
 		return -ENOSPC;
 	}
 	EXT4_I(inode)->i_reserved_data_blocks += nrblocks;
@@ -2092,18 +2154,18 @@
 static void ext4_print_free_blocks(struct inode *inode)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
-	printk(KERN_EMERG "Total free blocks count %lld\n",
-			ext4_count_free_blocks(inode->i_sb));
-	printk(KERN_EMERG "Free/Dirty block details\n");
-	printk(KERN_EMERG "free_blocks=%lld\n",
-			(long long)percpu_counter_sum(&sbi->s_freeblocks_counter));
-	printk(KERN_EMERG "dirty_blocks=%lld\n",
-			(long long)percpu_counter_sum(&sbi->s_dirtyblocks_counter));
-	printk(KERN_EMERG "Block reservation details\n");
-	printk(KERN_EMERG "i_reserved_data_blocks=%u\n",
-			EXT4_I(inode)->i_reserved_data_blocks);
-	printk(KERN_EMERG "i_reserved_meta_blocks=%u\n",
-			EXT4_I(inode)->i_reserved_meta_blocks);
+	printk(KERN_CRIT "Total free blocks count %lld\n",
+	       ext4_count_free_blocks(inode->i_sb));
+	printk(KERN_CRIT "Free/Dirty block details\n");
+	printk(KERN_CRIT "free_blocks=%lld\n",
+	       (long long) percpu_counter_sum(&sbi->s_freeblocks_counter));
+	printk(KERN_CRIT "dirty_blocks=%lld\n",
+	       (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+	printk(KERN_CRIT "Block reservation details\n");
+	printk(KERN_CRIT "i_reserved_data_blocks=%u\n",
+	       EXT4_I(inode)->i_reserved_data_blocks);
+	printk(KERN_CRIT "i_reserved_meta_blocks=%u\n",
+	       EXT4_I(inode)->i_reserved_meta_blocks);
 	return;
 }
 
@@ -2189,14 +2251,14 @@
 		 * writepage and writepages will again try to write
 		 * the same.
 		 */
-		printk(KERN_EMERG "%s block allocation failed for inode %lu "
-				  "at logical offset %llu with max blocks "
-				  "%zd with error %d\n",
-				  __func__, mpd->inode->i_ino,
-				  (unsigned long long)next,
-				  mpd->b_size >> mpd->inode->i_blkbits, err);
-		printk(KERN_EMERG "This should not happen.!! "
-					"Data will be lost\n");
+		ext4_msg(mpd->inode->i_sb, KERN_CRIT,
+			 "delayed block allocation failed for inode %lu at "
+			 "logical offset %llu with max blocks %zd with "
+			 "error %d\n", mpd->inode->i_ino,
+			 (unsigned long long) next,
+			 mpd->b_size >> mpd->inode->i_blkbits, err);
+		printk(KERN_CRIT "This should not happen!!  "
+		       "Data will be lost\n");
 		if (err == -ENOSPC) {
 			ext4_print_free_blocks(mpd->inode);
 		}
@@ -2743,8 +2805,10 @@
 	int no_nrwrite_index_update;
 	int pages_written = 0;
 	long pages_skipped;
+	unsigned int max_pages;
 	int range_cyclic, cycled = 1, io_done = 0;
-	int needed_blocks, ret = 0, nr_to_writebump = 0;
+	int needed_blocks, ret = 0;
+	long desired_nr_to_write, nr_to_writebump = 0;
 	loff_t range_start = wbc->range_start;
 	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
 
@@ -2771,16 +2835,6 @@
 	if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED))
 		return -EROFS;
 
-	/*
-	 * Make sure nr_to_write is >= sbi->s_mb_stream_request
-	 * This make sure small files blocks are allocated in
-	 * single attempt. This ensure that small files
-	 * get less fragmented.
-	 */
-	if (wbc->nr_to_write < sbi->s_mb_stream_request) {
-		nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
-		wbc->nr_to_write = sbi->s_mb_stream_request;
-	}
 	if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
 		range_whole = 1;
 
@@ -2795,6 +2849,36 @@
 	} else
 		index = wbc->range_start >> PAGE_CACHE_SHIFT;
 
+	/*
+	 * This works around two forms of stupidity.  The first is in
+	 * the writeback code, which caps the maximum number of pages
+	 * written to be 1024 pages.  This is wrong on multiple
+	 * levels; different architectues have a different page size,
+	 * which changes the maximum amount of data which gets
+	 * written.  Secondly, 4 megabytes is way too small.  XFS
+	 * forces this value to be 16 megabytes by multiplying
+	 * nr_to_write parameter by four, and then relies on its
+	 * allocator to allocate larger extents to make them
+	 * contiguous.  Unfortunately this brings us to the second
+	 * stupidity, which is that ext4's mballoc code only allocates
+	 * at most 2048 blocks.  So we force contiguous writes up to
+	 * the number of dirty blocks in the inode, or
+	 * sbi->max_writeback_mb_bump whichever is smaller.
+	 */
+	max_pages = sbi->s_max_writeback_mb_bump << (20 - PAGE_CACHE_SHIFT);
+	if (!range_cyclic && range_whole)
+		desired_nr_to_write = wbc->nr_to_write * 8;
+	else
+		desired_nr_to_write = ext4_num_dirty_pages(inode, index,
+							   max_pages);
+	if (desired_nr_to_write > max_pages)
+		desired_nr_to_write = max_pages;
+
+	if (wbc->nr_to_write < desired_nr_to_write) {
+		nr_to_writebump = desired_nr_to_write - wbc->nr_to_write;
+		wbc->nr_to_write = desired_nr_to_write;
+	}
+
 	mpd.wbc = wbc;
 	mpd.inode = mapping->host;
 
@@ -2822,10 +2906,9 @@
 		handle = ext4_journal_start(inode, needed_blocks);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
-			printk(KERN_CRIT "%s: jbd2_start: "
+			ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
 			       "%ld pages, ino %lu; err %d\n", __func__,
 				wbc->nr_to_write, inode->i_ino, ret);
-			dump_stack();
 			goto out_writepages;
 		}
 
@@ -2897,9 +2980,10 @@
 		goto retry;
 	}
 	if (pages_skipped != wbc->pages_skipped)
-		printk(KERN_EMERG "This should not happen leaving %s "
-				"with nr_to_write = %ld ret = %d\n",
-				__func__, wbc->nr_to_write, ret);
+		ext4_msg(inode->i_sb, KERN_CRIT,
+			 "This should not happen leaving %s "
+			 "with nr_to_write = %ld ret = %d\n",
+			 __func__, wbc->nr_to_write, ret);
 
 	/* Update index */
 	index += pages_written;
@@ -2914,7 +2998,8 @@
 out_writepages:
 	if (!no_nrwrite_index_update)
 		wbc->no_nrwrite_index_update = 0;
-	wbc->nr_to_write -= nr_to_writebump;
+	if (wbc->nr_to_write > nr_to_writebump)
+		wbc->nr_to_write -= nr_to_writebump;
 	wbc->range_start = range_start;
 	trace_ext4_da_writepages_result(inode, wbc, ret, pages_written);
 	return ret;
@@ -3272,6 +3357,8 @@
 }
 
 /*
+ * O_DIRECT for ext3 (or indirect map) based files
+ *
  * If the O_DIRECT write will extend the file then add this inode to the
  * orphan list.  So recovery will truncate it back to the original size
  * if the machine crashes during the write.
@@ -3280,7 +3367,7 @@
  * crashes then stale disk data _may_ be exposed inside the file. But current
  * VFS code falls back into buffered path in that case so we are safe.
  */
-static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb,
 			      const struct iovec *iov, loff_t offset,
 			      unsigned long nr_segs)
 {
@@ -3354,6 +3441,359 @@
 	return ret;
 }
 
+/* Maximum number of blocks we map for direct IO at once. */
+
+static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock,
+		   struct buffer_head *bh_result, int create)
+{
+	handle_t *handle = NULL;
+	int ret = 0;
+	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int dio_credits;
+
+	ext4_debug("ext4_get_block_dio_write: inode %lu, create flag %d\n",
+		   inode->i_ino, create);
+	/*
+	 * DIO VFS code passes create = 0 flag for write to
+	 * the middle of file. It does this to avoid block
+	 * allocation for holes, to prevent expose stale data
+	 * out when there is parallel buffered read (which does
+	 * not hold the i_mutex lock) while direct IO write has
+	 * not completed. DIO request on holes finally falls back
+	 * to buffered IO for this reason.
+	 *
+	 * For ext4 extent based file, since we support fallocate,
+	 * new allocated extent as uninitialized, for holes, we
+	 * could fallocate blocks for holes, thus parallel
+	 * buffered IO read will zero out the page when read on
+	 * a hole while parallel DIO write to the hole has not completed.
+	 *
+	 * when we come here, we know it's a direct IO write to
+	 * to the middle of file (<i_size)
+	 * so it's safe to override the create flag from VFS.
+	 */
+	create = EXT4_GET_BLOCKS_DIO_CREATE_EXT;
+
+	if (max_blocks > DIO_MAX_BLOCKS)
+		max_blocks = DIO_MAX_BLOCKS;
+	dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+	handle = ext4_journal_start(inode, dio_credits);
+	if (IS_ERR(handle)) {
+		ret = PTR_ERR(handle);
+		goto out;
+	}
+	ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result,
+			      create);
+	if (ret > 0) {
+		bh_result->b_size = (ret << inode->i_blkbits);
+		ret = 0;
+	}
+	ext4_journal_stop(handle);
+out:
+	return ret;
+}
+
+static void ext4_free_io_end(ext4_io_end_t *io)
+{
+	BUG_ON(!io);
+	iput(io->inode);
+	kfree(io);
+}
+static void dump_aio_dio_list(struct inode * inode)
+{
+#ifdef	EXT4_DEBUG
+	struct list_head *cur, *before, *after;
+	ext4_io_end_t *io, *io0, *io1;
+
+	if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+		ext4_debug("inode %lu aio dio list is empty\n", inode->i_ino);
+		return;
+	}
+
+	ext4_debug("Dump inode %lu aio_dio_completed_IO list \n", inode->i_ino);
+	list_for_each_entry(io, &EXT4_I(inode)->i_aio_dio_complete_list, list){
+		cur = &io->list;
+		before = cur->prev;
+		io0 = container_of(before, ext4_io_end_t, list);
+		after = cur->next;
+		io1 = container_of(after, ext4_io_end_t, list);
+
+		ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n",
+			    io, inode->i_ino, io0, io1);
+	}
+#endif
+}
+
+/*
+ * check a range of space and convert unwritten extents to written.
+ */
+static int ext4_end_aio_dio_nolock(ext4_io_end_t *io)
+{
+	struct inode *inode = io->inode;
+	loff_t offset = io->offset;
+	size_t size = io->size;
+	int ret = 0;
+
+	ext4_debug("end_aio_dio_onlock: io 0x%p from inode %lu,list->next 0x%p,"
+		   "list->prev 0x%p\n",
+	           io, inode->i_ino, io->list.next, io->list.prev);
+
+	if (list_empty(&io->list))
+		return ret;
+
+	if (io->flag != DIO_AIO_UNWRITTEN)
+		return ret;
+
+	if (offset + size <= i_size_read(inode))
+		ret = ext4_convert_unwritten_extents(inode, offset, size);
+
+	if (ret < 0) {
+		printk(KERN_EMERG "%s: failed to convert unwritten"
+			"extents to written extents, error is %d"
+			" io is still on inode %lu aio dio list\n",
+                       __func__, ret, inode->i_ino);
+		return ret;
+	}
+
+	/* clear the DIO AIO unwritten flag */
+	io->flag = 0;
+	return ret;
+}
+/*
+ * work on completed aio dio IO, to convert unwritten extents to extents
+ */
+static void ext4_end_aio_dio_work(struct work_struct *work)
+{
+	ext4_io_end_t *io  = container_of(work, ext4_io_end_t, work);
+	struct inode *inode = io->inode;
+	int ret = 0;
+
+	mutex_lock(&inode->i_mutex);
+	ret = ext4_end_aio_dio_nolock(io);
+	if (ret >= 0) {
+		if (!list_empty(&io->list))
+			list_del_init(&io->list);
+		ext4_free_io_end(io);
+	}
+	mutex_unlock(&inode->i_mutex);
+}
+/*
+ * This function is called from ext4_sync_file().
+ *
+ * When AIO DIO IO is completed, the work to convert unwritten
+ * extents to written is queued on workqueue but may not get immediately
+ * scheduled. When fsync is called, we need to ensure the
+ * conversion is complete before fsync returns.
+ * The inode keeps track of a list of completed AIO from DIO path
+ * that might needs to do the conversion. This function walks through
+ * the list and convert the related unwritten extents to written.
+ */
+int flush_aio_dio_completed_IO(struct inode *inode)
+{
+	ext4_io_end_t *io;
+	int ret = 0;
+	int ret2 = 0;
+
+	if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list))
+		return ret;
+
+	dump_aio_dio_list(inode);
+	while (!list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+		io = list_entry(EXT4_I(inode)->i_aio_dio_complete_list.next,
+				ext4_io_end_t, list);
+		/*
+		 * Calling ext4_end_aio_dio_nolock() to convert completed
+		 * IO to written.
+		 *
+		 * When ext4_sync_file() is called, run_queue() may already
+		 * about to flush the work corresponding to this io structure.
+		 * It will be upset if it founds the io structure related
+		 * to the work-to-be schedule is freed.
+		 *
+		 * Thus we need to keep the io structure still valid here after
+		 * convertion finished. The io structure has a flag to
+		 * avoid double converting from both fsync and background work
+		 * queue work.
+		 */
+		ret = ext4_end_aio_dio_nolock(io);
+		if (ret < 0)
+			ret2 = ret;
+		else
+			list_del_init(&io->list);
+	}
+	return (ret2 < 0) ? ret2 : 0;
+}
+
+static ext4_io_end_t *ext4_init_io_end (struct inode *inode)
+{
+	ext4_io_end_t *io = NULL;
+
+	io = kmalloc(sizeof(*io), GFP_NOFS);
+
+	if (io) {
+		igrab(inode);
+		io->inode = inode;
+		io->flag = 0;
+		io->offset = 0;
+		io->size = 0;
+		io->error = 0;
+		INIT_WORK(&io->work, ext4_end_aio_dio_work);
+		INIT_LIST_HEAD(&io->list);
+	}
+
+	return io;
+}
+
+static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
+			    ssize_t size, void *private)
+{
+        ext4_io_end_t *io_end = iocb->private;
+	struct workqueue_struct *wq;
+
+	ext_debug("ext4_end_io_dio(): io_end 0x%p"
+		  "for inode %lu, iocb 0x%p, offset %llu, size %llu\n",
+ 		  iocb->private, io_end->inode->i_ino, iocb, offset,
+		  size);
+	/* if not async direct IO or dio with 0 bytes write, just return */
+	if (!io_end || !size)
+		return;
+
+	/* if not aio dio with unwritten extents, just free io and return */
+	if (io_end->flag != DIO_AIO_UNWRITTEN){
+		ext4_free_io_end(io_end);
+		iocb->private = NULL;
+		return;
+	}
+
+	io_end->offset = offset;
+	io_end->size = size;
+	wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq;
+
+	/* queue the work to convert unwritten extents to written */
+	queue_work(wq, &io_end->work);
+
+	/* Add the io_end to per-inode completed aio dio list*/
+	list_add_tail(&io_end->list,
+		 &EXT4_I(io_end->inode)->i_aio_dio_complete_list);
+	iocb->private = NULL;
+}
+/*
+ * For ext4 extent files, ext4 will do direct-io write to holes,
+ * preallocated extents, and those write extend the file, no need to
+ * fall back to buffered IO.
+ *
+ * For holes, we fallocate those blocks, mark them as unintialized
+ * If those blocks were preallocated, we mark sure they are splited, but
+ * still keep the range to write as unintialized.
+ *
+ * The unwrritten extents will be converted to written when DIO is completed.
+ * For async direct IO, since the IO may still pending when return, we
+ * set up an end_io call back function, which will do the convertion
+ * when async direct IO completed.
+ *
+ * If the O_DIRECT write will extend the file then add this inode to the
+ * orphan list.  So recovery will truncate it back to the original size
+ * if the machine crashes during the write.
+ *
+ */
+static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
+			      const struct iovec *iov, loff_t offset,
+			      unsigned long nr_segs)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+	ssize_t ret;
+	size_t count = iov_length(iov, nr_segs);
+
+	loff_t final_size = offset + count;
+	if (rw == WRITE && final_size <= inode->i_size) {
+		/*
+ 		 * We could direct write to holes and fallocate.
+		 *
+ 		 * Allocated blocks to fill the hole are marked as uninitialized
+ 		 * to prevent paralel buffered read to expose the stale data
+ 		 * before DIO complete the data IO.
+		 *
+ 		 * As to previously fallocated extents, ext4 get_block
+ 		 * will just simply mark the buffer mapped but still
+ 		 * keep the extents uninitialized.
+ 		 *
+		 * for non AIO case, we will convert those unwritten extents
+		 * to written after return back from blockdev_direct_IO.
+		 *
+		 * for async DIO, the conversion needs to be defered when
+		 * the IO is completed. The ext4 end_io callback function
+		 * will be called to take care of the conversion work.
+		 * Here for async case, we allocate an io_end structure to
+		 * hook to the iocb.
+ 		 */
+		iocb->private = NULL;
+		EXT4_I(inode)->cur_aio_dio = NULL;
+		if (!is_sync_kiocb(iocb)) {
+			iocb->private = ext4_init_io_end(inode);
+			if (!iocb->private)
+				return -ENOMEM;
+			/*
+			 * we save the io structure for current async
+			 * direct IO, so that later ext4_get_blocks()
+			 * could flag the io structure whether there
+			 * is a unwritten extents needs to be converted
+			 * when IO is completed.
+			 */
+			EXT4_I(inode)->cur_aio_dio = iocb->private;
+		}
+
+		ret = blockdev_direct_IO(rw, iocb, inode,
+					 inode->i_sb->s_bdev, iov,
+					 offset, nr_segs,
+					 ext4_get_block_dio_write,
+					 ext4_end_io_dio);
+		if (iocb->private)
+			EXT4_I(inode)->cur_aio_dio = NULL;
+		/*
+		 * The io_end structure takes a reference to the inode,
+		 * that structure needs to be destroyed and the
+		 * reference to the inode need to be dropped, when IO is
+		 * complete, even with 0 byte write, or failed.
+		 *
+		 * In the successful AIO DIO case, the io_end structure will be
+		 * desctroyed and the reference to the inode will be dropped
+		 * after the end_io call back function is called.
+		 *
+		 * In the case there is 0 byte write, or error case, since
+		 * VFS direct IO won't invoke the end_io call back function,
+		 * we need to free the end_io structure here.
+		 */
+		if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) {
+			ext4_free_io_end(iocb->private);
+			iocb->private = NULL;
+		} else if (ret > 0)
+			/*
+			 * for non AIO case, since the IO is already
+			 * completed, we could do the convertion right here
+			 */
+			ret = ext4_convert_unwritten_extents(inode,
+								offset, ret);
+		return ret;
+	}
+
+	/* for write the the end of file case, we fall back to old way */
+	return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
+static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+			      const struct iovec *iov, loff_t offset,
+			      unsigned long nr_segs)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+
+	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+		return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs);
+
+	return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
 /*
  * Pages can be marked dirty completely asynchronously from ext4's journalling
  * activity.  By filemap_sync_pte(), try_to_unmap_one(), etc.  We cannot do
@@ -4551,8 +4991,7 @@
  */
 static int ext4_do_update_inode(handle_t *handle,
 				struct inode *inode,
-				struct ext4_iloc *iloc,
-				int do_sync)
+				struct ext4_iloc *iloc)
 {
 	struct ext4_inode *raw_inode = ext4_raw_inode(iloc);
 	struct ext4_inode_info *ei = EXT4_I(inode);
@@ -4653,22 +5092,10 @@
 		raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize);
 	}
 
-	/*
-	 * If we're not using a journal and we were called from
-	 * ext4_write_inode() to sync the inode (making do_sync true),
-	 * we can just use sync_dirty_buffer() directly to do our dirty
-	 * work.  Testing s_journal here is a bit redundant but it's
-	 * worth it to avoid potential future trouble.
-	 */
-	if (EXT4_SB(inode->i_sb)->s_journal == NULL && do_sync) {
-		BUFFER_TRACE(bh, "call sync_dirty_buffer");
-		sync_dirty_buffer(bh);
-	} else {
-		BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
-		rc = ext4_handle_dirty_metadata(handle, inode, bh);
-		if (!err)
-			err = rc;
-	}
+	BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
+	rc = ext4_handle_dirty_metadata(handle, inode, bh);
+	if (!err)
+		err = rc;
 	ei->i_state &= ~EXT4_STATE_NEW;
 
 out_brelse:
@@ -4736,8 +5163,16 @@
 		err = ext4_get_inode_loc(inode, &iloc);
 		if (err)
 			return err;
-		err = ext4_do_update_inode(EXT4_NOJOURNAL_HANDLE,
-					   inode, &iloc, wait);
+		if (wait)
+			sync_dirty_buffer(iloc.bh);
+		if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
+			ext4_error(inode->i_sb, __func__,
+				   "IO error syncing inode, "
+				   "inode=%lu, block=%llu",
+				   inode->i_ino,
+				   (unsigned long long)iloc.bh->b_blocknr);
+			err = -EIO;
+		}
 	}
 	return err;
 }
@@ -5033,7 +5468,7 @@
 	get_bh(iloc->bh);
 
 	/* ext4_do_update_inode() does jbd2_journal_dirty_metadata */
-	err = ext4_do_update_inode(handle, inode, iloc, 0);
+	err = ext4_do_update_inode(handle, inode, iloc);
 	put_bh(iloc->bh);
 	return err;
 }
@@ -5180,24 +5615,13 @@
 	handle_t *current_handle = ext4_journal_current_handle();
 	handle_t *handle;
 
-	if (!ext4_handle_valid(current_handle)) {
-		ext4_mark_inode_dirty(current_handle, inode);
-		return;
-	}
-
 	handle = ext4_journal_start(inode, 2);
 	if (IS_ERR(handle))
 		goto out;
-	if (current_handle &&
-		current_handle->h_transaction != handle->h_transaction) {
-		/* This task has a transaction open against a different fs */
-		printk(KERN_EMERG "%s: transactions do not match!\n",
-		       __func__);
-	} else {
-		jbd_debug(5, "marking dirty.  outer handle=%p\n",
-				current_handle);
-		ext4_mark_inode_dirty(handle, inode);
-	}
+
+	jbd_debug(5, "marking dirty.  outer handle=%p\n", current_handle);
+	ext4_mark_inode_dirty(handle, inode);
+
 	ext4_journal_stop(handle);
 out:
 	return;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index e9c6189..bba1282 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2096,207 +2096,6 @@
 	return err;
 }
 
-#ifdef EXT4_MB_HISTORY
-struct ext4_mb_proc_session {
-	struct ext4_mb_history *history;
-	struct super_block *sb;
-	int start;
-	int max;
-};
-
-static void *ext4_mb_history_skip_empty(struct ext4_mb_proc_session *s,
-					struct ext4_mb_history *hs,
-					int first)
-{
-	if (hs == s->history + s->max)
-		hs = s->history;
-	if (!first && hs == s->history + s->start)
-		return NULL;
-	while (hs->orig.fe_len == 0) {
-		hs++;
-		if (hs == s->history + s->max)
-			hs = s->history;
-		if (hs == s->history + s->start)
-			return NULL;
-	}
-	return hs;
-}
-
-static void *ext4_mb_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
-	struct ext4_mb_proc_session *s = seq->private;
-	struct ext4_mb_history *hs;
-	int l = *pos;
-
-	if (l == 0)
-		return SEQ_START_TOKEN;
-	hs = ext4_mb_history_skip_empty(s, s->history + s->start, 1);
-	if (!hs)
-		return NULL;
-	while (--l && (hs = ext4_mb_history_skip_empty(s, ++hs, 0)) != NULL);
-	return hs;
-}
-
-static void *ext4_mb_seq_history_next(struct seq_file *seq, void *v,
-				      loff_t *pos)
-{
-	struct ext4_mb_proc_session *s = seq->private;
-	struct ext4_mb_history *hs = v;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return ext4_mb_history_skip_empty(s, s->history + s->start, 1);
-	else
-		return ext4_mb_history_skip_empty(s, ++hs, 0);
-}
-
-static int ext4_mb_seq_history_show(struct seq_file *seq, void *v)
-{
-	char buf[25], buf2[25], buf3[25], *fmt;
-	struct ext4_mb_history *hs = v;
-
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(seq, "%-5s %-8s %-23s %-23s %-23s %-5s "
-				"%-5s %-2s %-6s %-5s %-5s %-6s\n",
-			  "pid", "inode", "original", "goal", "result", "found",
-			   "grps", "cr", "flags", "merge", "tail", "broken");
-		return 0;
-	}
-
-	if (hs->op == EXT4_MB_HISTORY_ALLOC) {
-		fmt = "%-5u %-8u %-23s %-23s %-23s %-5u %-5u %-2u "
-			"0x%04x %-5s %-5u %-6u\n";
-		sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len,
-			hs->result.fe_logical);
-		sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
-			hs->orig.fe_start, hs->orig.fe_len,
-			hs->orig.fe_logical);
-		sprintf(buf3, "%u/%d/%u@%u", hs->goal.fe_group,
-			hs->goal.fe_start, hs->goal.fe_len,
-			hs->goal.fe_logical);
-		seq_printf(seq, fmt, hs->pid, hs->ino, buf, buf3, buf2,
-				hs->found, hs->groups, hs->cr, hs->flags,
-				hs->merged ? "M" : "", hs->tail,
-				hs->buddy ? 1 << hs->buddy : 0);
-	} else if (hs->op == EXT4_MB_HISTORY_PREALLOC) {
-		fmt = "%-5u %-8u %-23s %-23s %-23s\n";
-		sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len,
-			hs->result.fe_logical);
-		sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
-			hs->orig.fe_start, hs->orig.fe_len,
-			hs->orig.fe_logical);
-		seq_printf(seq, fmt, hs->pid, hs->ino, buf, "", buf2);
-	} else if (hs->op == EXT4_MB_HISTORY_DISCARD) {
-		sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len);
-		seq_printf(seq, "%-5u %-8u %-23s discard\n",
-				hs->pid, hs->ino, buf2);
-	} else if (hs->op == EXT4_MB_HISTORY_FREE) {
-		sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len);
-		seq_printf(seq, "%-5u %-8u %-23s free\n",
-				hs->pid, hs->ino, buf2);
-	}
-	return 0;
-}
-
-static void ext4_mb_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations ext4_mb_seq_history_ops = {
-	.start  = ext4_mb_seq_history_start,
-	.next   = ext4_mb_seq_history_next,
-	.stop   = ext4_mb_seq_history_stop,
-	.show   = ext4_mb_seq_history_show,
-};
-
-static int ext4_mb_seq_history_open(struct inode *inode, struct file *file)
-{
-	struct super_block *sb = PDE(inode)->data;
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	struct ext4_mb_proc_session *s;
-	int rc;
-	int size;
-
-	if (unlikely(sbi->s_mb_history == NULL))
-		return -ENOMEM;
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL)
-		return -ENOMEM;
-	s->sb = sb;
-	size = sizeof(struct ext4_mb_history) * sbi->s_mb_history_max;
-	s->history = kmalloc(size, GFP_KERNEL);
-	if (s->history == NULL) {
-		kfree(s);
-		return -ENOMEM;
-	}
-
-	spin_lock(&sbi->s_mb_history_lock);
-	memcpy(s->history, sbi->s_mb_history, size);
-	s->max = sbi->s_mb_history_max;
-	s->start = sbi->s_mb_history_cur % s->max;
-	spin_unlock(&sbi->s_mb_history_lock);
-
-	rc = seq_open(file, &ext4_mb_seq_history_ops);
-	if (rc == 0) {
-		struct seq_file *m = (struct seq_file *)file->private_data;
-		m->private = s;
-	} else {
-		kfree(s->history);
-		kfree(s);
-	}
-	return rc;
-
-}
-
-static int ext4_mb_seq_history_release(struct inode *inode, struct file *file)
-{
-	struct seq_file *seq = (struct seq_file *)file->private_data;
-	struct ext4_mb_proc_session *s = seq->private;
-	kfree(s->history);
-	kfree(s);
-	return seq_release(inode, file);
-}
-
-static ssize_t ext4_mb_seq_history_write(struct file *file,
-				const char __user *buffer,
-				size_t count, loff_t *ppos)
-{
-	struct seq_file *seq = (struct seq_file *)file->private_data;
-	struct ext4_mb_proc_session *s = seq->private;
-	struct super_block *sb = s->sb;
-	char str[32];
-	int value;
-
-	if (count >= sizeof(str)) {
-		printk(KERN_ERR "EXT4-fs: %s string too long, max %u bytes\n",
-				"mb_history", (int)sizeof(str));
-		return -EOVERFLOW;
-	}
-
-	if (copy_from_user(str, buffer, count))
-		return -EFAULT;
-
-	value = simple_strtol(str, NULL, 0);
-	if (value < 0)
-		return -ERANGE;
-	EXT4_SB(sb)->s_mb_history_filter = value;
-
-	return count;
-}
-
-static const struct file_operations ext4_mb_seq_history_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ext4_mb_seq_history_open,
-	.read		= seq_read,
-	.write		= ext4_mb_seq_history_write,
-	.llseek		= seq_lseek,
-	.release	= ext4_mb_seq_history_release,
-};
-
 static void *ext4_mb_seq_groups_start(struct seq_file *seq, loff_t *pos)
 {
 	struct super_block *sb = seq->private;
@@ -2396,82 +2195,6 @@
 	.release	= seq_release,
 };
 
-static void ext4_mb_history_release(struct super_block *sb)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-
-	if (sbi->s_proc != NULL) {
-		remove_proc_entry("mb_groups", sbi->s_proc);
-		if (sbi->s_mb_history_max)
-			remove_proc_entry("mb_history", sbi->s_proc);
-	}
-	kfree(sbi->s_mb_history);
-}
-
-static void ext4_mb_history_init(struct super_block *sb)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	int i;
-
-	if (sbi->s_proc != NULL) {
-		if (sbi->s_mb_history_max)
-			proc_create_data("mb_history", S_IRUGO, sbi->s_proc,
-					 &ext4_mb_seq_history_fops, sb);
-		proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
-				 &ext4_mb_seq_groups_fops, sb);
-	}
-
-	sbi->s_mb_history_cur = 0;
-	spin_lock_init(&sbi->s_mb_history_lock);
-	i = sbi->s_mb_history_max * sizeof(struct ext4_mb_history);
-	sbi->s_mb_history = i ? kzalloc(i, GFP_KERNEL) : NULL;
-	/* if we can't allocate history, then we simple won't use it */
-}
-
-static noinline_for_stack void
-ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
-	struct ext4_mb_history h;
-
-	if (sbi->s_mb_history == NULL)
-		return;
-
-	if (!(ac->ac_op & sbi->s_mb_history_filter))
-		return;
-
-	h.op = ac->ac_op;
-	h.pid = current->pid;
-	h.ino = ac->ac_inode ? ac->ac_inode->i_ino : 0;
-	h.orig = ac->ac_o_ex;
-	h.result = ac->ac_b_ex;
-	h.flags = ac->ac_flags;
-	h.found = ac->ac_found;
-	h.groups = ac->ac_groups_scanned;
-	h.cr = ac->ac_criteria;
-	h.tail = ac->ac_tail;
-	h.buddy = ac->ac_buddy;
-	h.merged = 0;
-	if (ac->ac_op == EXT4_MB_HISTORY_ALLOC) {
-		if (ac->ac_g_ex.fe_start == ac->ac_b_ex.fe_start &&
-				ac->ac_g_ex.fe_group == ac->ac_b_ex.fe_group)
-			h.merged = 1;
-		h.goal = ac->ac_g_ex;
-		h.result = ac->ac_f_ex;
-	}
-
-	spin_lock(&sbi->s_mb_history_lock);
-	memcpy(sbi->s_mb_history + sbi->s_mb_history_cur, &h, sizeof(h));
-	if (++sbi->s_mb_history_cur >= sbi->s_mb_history_max)
-		sbi->s_mb_history_cur = 0;
-	spin_unlock(&sbi->s_mb_history_lock);
-}
-
-#else
-#define ext4_mb_history_release(sb)
-#define ext4_mb_history_init(sb)
-#endif
-
 
 /* Create and initialize ext4_group_info data for the given group. */
 int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group,
@@ -2690,7 +2413,6 @@
 	sbi->s_mb_stats = MB_DEFAULT_STATS;
 	sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
 	sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
-	sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT;
 	sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
 
 	sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group);
@@ -2708,12 +2430,12 @@
 		spin_lock_init(&lg->lg_prealloc_lock);
 	}
 
-	ext4_mb_history_init(sb);
+	if (sbi->s_proc)
+		proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
+				 &ext4_mb_seq_groups_fops, sb);
 
 	if (sbi->s_journal)
 		sbi->s_journal->j_commit_callback = release_blocks_on_commit;
-
-	printk(KERN_INFO "EXT4-fs: mballoc enabled\n");
 	return 0;
 }
 
@@ -2790,7 +2512,8 @@
 	}
 
 	free_percpu(sbi->s_locality_groups);
-	ext4_mb_history_release(sb);
+	if (sbi->s_proc)
+		remove_proc_entry("mb_groups", sbi->s_proc);
 
 	return 0;
 }
@@ -3276,7 +2999,10 @@
 			atomic_inc(&sbi->s_bal_breaks);
 	}
 
-	ext4_mb_store_history(ac);
+	if (ac->ac_op == EXT4_MB_HISTORY_ALLOC)
+		trace_ext4_mballoc_alloc(ac);
+	else
+		trace_ext4_mballoc_prealloc(ac);
 }
 
 /*
@@ -3776,7 +3502,6 @@
 	if (ac) {
 		ac->ac_sb = sb;
 		ac->ac_inode = pa->pa_inode;
-		ac->ac_op = EXT4_MB_HISTORY_DISCARD;
 	}
 
 	while (bit < end) {
@@ -3796,7 +3521,7 @@
 			ac->ac_b_ex.fe_start = bit;
 			ac->ac_b_ex.fe_len = next - bit;
 			ac->ac_b_ex.fe_logical = 0;
-			ext4_mb_store_history(ac);
+			trace_ext4_mballoc_discard(ac);
 		}
 
 		trace_ext4_mb_release_inode_pa(ac, pa, grp_blk_start + bit,
@@ -3831,9 +3556,6 @@
 	ext4_group_t group;
 	ext4_grpblk_t bit;
 
-	if (ac)
-		ac->ac_op = EXT4_MB_HISTORY_DISCARD;
-
 	trace_ext4_mb_release_group_pa(ac, pa);
 	BUG_ON(pa->pa_deleted == 0);
 	ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
@@ -3848,7 +3570,7 @@
 		ac->ac_b_ex.fe_start = bit;
 		ac->ac_b_ex.fe_len = pa->pa_len;
 		ac->ac_b_ex.fe_logical = 0;
-		ext4_mb_store_history(ac);
+		trace_ext4_mballoc_discard(ac);
 	}
 
 	return 0;
@@ -4189,7 +3911,6 @@
 	size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
 	isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1)
 		>> bsbits;
-	size = max(size, isize);
 
 	if ((size == isize) &&
 	    !ext4_fs_is_busy(sbi) &&
@@ -4199,6 +3920,7 @@
 	}
 
 	/* don't use group allocation for large files */
+	size = max(size, isize);
 	if (size >= sbi->s_mb_stream_request) {
 		ac->ac_flags |= EXT4_MB_STREAM_ALLOC;
 		return;
@@ -4739,7 +4461,6 @@
 
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
 	if (ac) {
-		ac->ac_op = EXT4_MB_HISTORY_FREE;
 		ac->ac_inode = inode;
 		ac->ac_sb = sb;
 	}
@@ -4806,7 +4527,7 @@
 		ac->ac_b_ex.fe_group = block_group;
 		ac->ac_b_ex.fe_start = bit;
 		ac->ac_b_ex.fe_len = count;
-		ext4_mb_store_history(ac);
+		trace_ext4_mballoc_free(ac);
 	}
 
 	err = ext4_mb_load_buddy(sb, block_group, &e4b);
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index 188d3d7..0ca8110 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -52,18 +52,8 @@
 #define mb_debug(n, fmt, a...)
 #endif
 
-/*
- * with EXT4_MB_HISTORY mballoc stores last N allocations in memory
- * and you can monitor it in /proc/fs/ext4/<dev>/mb_history
- */
-#define EXT4_MB_HISTORY
 #define EXT4_MB_HISTORY_ALLOC		1	/* allocation */
 #define EXT4_MB_HISTORY_PREALLOC	2	/* preallocated blocks used */
-#define EXT4_MB_HISTORY_DISCARD		4	/* preallocation discarded */
-#define EXT4_MB_HISTORY_FREE		8	/* free */
-
-#define EXT4_MB_HISTORY_DEFAULT		(EXT4_MB_HISTORY_ALLOC | \
-					 EXT4_MB_HISTORY_PREALLOC)
 
 /*
  * How long mballoc can look for a best extent (in found extents)
@@ -84,7 +74,7 @@
  * with 'ext4_mb_stats' allocator will collect stats that will be
  * shown at umount. The collecting costs though!
  */
-#define MB_DEFAULT_STATS		1
+#define MB_DEFAULT_STATS		0
 
 /*
  * files smaller than MB_DEFAULT_STREAM_THRESHOLD are served
@@ -217,22 +207,6 @@
 #define AC_STATUS_FOUND		2
 #define AC_STATUS_BREAK		3
 
-struct ext4_mb_history {
-	struct ext4_free_extent orig;	/* orig allocation */
-	struct ext4_free_extent goal;	/* goal allocation */
-	struct ext4_free_extent result;	/* result allocation */
-	unsigned pid;
-	unsigned ino;
-	__u16 found;	/* how many extents have been found */
-	__u16 groups;	/* how many groups have been scanned */
-	__u16 tail;	/* what tail broke some buddy */
-	__u16 buddy;	/* buddy the tail ^^^ broke */
-	__u16 flags;
-	__u8 cr:3;	/* which phase the result extent was found at */
-	__u8 op:4;
-	__u8 merged:1;
-};
-
 struct ext4_buddy {
 	struct page *bd_buddy_page;
 	void *bd_buddy;
@@ -247,13 +221,6 @@
 #define EXT4_MB_BITMAP(e4b)	((e4b)->bd_bitmap)
 #define EXT4_MB_BUDDY(e4b)	((e4b)->bd_buddy)
 
-#ifndef EXT4_MB_HISTORY
-static inline void ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
-	return;
-}
-#endif
-
 #define in_range(b, first, len)	((b) >= (first) && (b) <= (first) + (len) - 1)
 
 static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index bf519f2..a93d5b8 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -75,7 +75,7 @@
 				goto err_out;
 		}
 	}
-	retval = ext4_ext_insert_extent(handle, inode, path, &newext);
+	retval = ext4_ext_insert_extent(handle, inode, path, &newext, 0);
 err_out:
 	if (path) {
 		ext4_ext_drop_refs(path);
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index c07a291..25b6b14 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -322,7 +322,7 @@
 			goto out;
 
 		if (ext4_ext_insert_extent(handle, orig_inode,
-					orig_path, new_ext))
+					orig_path, new_ext, 0))
 			goto out;
 	}
 
@@ -333,7 +333,7 @@
 			goto out;
 
 		if (ext4_ext_insert_extent(handle, orig_inode,
-					   orig_path, end_ext))
+					   orig_path, end_ext, 0))
 			goto out;
 	}
 out:
@@ -1001,14 +1001,6 @@
 		return -EINVAL;
 	}
 
-	/* orig and donor should be different file */
-	if (orig_inode->i_ino == donor_inode->i_ino) {
-		ext4_debug("ext4 move extent: The argument files should not "
-			"be same file [ino:orig %lu, donor %lu]\n",
-			orig_inode->i_ino, donor_inode->i_ino);
-		return -EINVAL;
-	}
-
 	/* Ext4 move extent supports only extent based file */
 	if (!(EXT4_I(orig_inode)->i_flags & EXT4_EXTENTS_FL)) {
 		ext4_debug("ext4 move extent: orig file is not extents "
@@ -1232,6 +1224,14 @@
 	int block_len_in_page;
 	int uninit;
 
+	/* orig and donor should be different file */
+	if (orig_inode->i_ino == donor_inode->i_ino) {
+		ext4_debug("ext4 move extent: The argument files should not "
+			"be same file [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
 	/* protect orig and donor against a truncate */
 	ret1 = mext_inode_double_lock(orig_inode, donor_inode);
 	if (ret1 < 0)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 42f81d2..7c8fe80 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2076,7 +2076,8 @@
 	struct ext4_iloc iloc;
 	int err = 0;
 
-	if (!ext4_handle_valid(handle))
+	/* ext4_handle_valid() assumes a valid handle_t pointer */
+	if (handle && !ext4_handle_valid(handle))
 		return 0;
 
 	mutex_lock(&EXT4_SB(inode->i_sb)->s_orphan_lock);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index df539ba..12e726a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -50,13 +50,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/ext4.h>
 
-static int default_mb_history_length = 1000;
-
-module_param_named(default_mb_history_length, default_mb_history_length,
-		   int, 0644);
-MODULE_PARM_DESC(default_mb_history_length,
-		 "Default number of entries saved for mb_history");
-
 struct proc_dir_entry *ext4_proc_root;
 static struct kset *ext4_kset;
 
@@ -189,6 +182,36 @@
 		bg->bg_itable_unused_hi = cpu_to_le16(count >> 16);
 }
 
+
+/* Just increment the non-pointer handle value */
+static handle_t *ext4_get_nojournal(void)
+{
+	handle_t *handle = current->journal_info;
+	unsigned long ref_cnt = (unsigned long)handle;
+
+	BUG_ON(ref_cnt >= EXT4_NOJOURNAL_MAX_REF_COUNT);
+
+	ref_cnt++;
+	handle = (handle_t *)ref_cnt;
+
+	current->journal_info = handle;
+	return handle;
+}
+
+
+/* Decrement the non-pointer handle value */
+static void ext4_put_nojournal(handle_t *handle)
+{
+	unsigned long ref_cnt = (unsigned long)handle;
+
+	BUG_ON(ref_cnt == 0);
+
+	ref_cnt--;
+	handle = (handle_t *)ref_cnt;
+
+	current->journal_info = handle;
+}
+
 /*
  * Wrappers for jbd2_journal_start/end.
  *
@@ -215,11 +238,7 @@
 		}
 		return jbd2_journal_start(journal, nblocks);
 	}
-	/*
-	 * We're not journaling, return the appropriate indication.
-	 */
-	current->journal_info = EXT4_NOJOURNAL_HANDLE;
-	return current->journal_info;
+	return ext4_get_nojournal();
 }
 
 /*
@@ -235,11 +254,7 @@
 	int rc;
 
 	if (!ext4_handle_valid(handle)) {
-		/*
-		 * Do this here since we don't call jbd2_journal_stop() in
-		 * no-journal mode.
-		 */
-		current->journal_info = NULL;
+		ext4_put_nojournal(handle);
 		return 0;
 	}
 	sb = handle->h_transaction->t_journal->j_private;
@@ -580,6 +595,9 @@
 	struct ext4_super_block *es = sbi->s_es;
 	int i, err;
 
+	flush_workqueue(sbi->dio_unwritten_wq);
+	destroy_workqueue(sbi->dio_unwritten_wq);
+
 	lock_super(sb);
 	lock_kernel();
 	if (sb->s_dirt)
@@ -684,6 +702,8 @@
 	ei->i_allocated_meta_blocks = 0;
 	ei->i_delalloc_reserved_flag = 0;
 	spin_lock_init(&(ei->i_block_reservation_lock));
+	INIT_LIST_HEAD(&ei->i_aio_dio_complete_list);
+	ei->cur_aio_dio = NULL;
 
 	return &ei->vfs_inode;
 }
@@ -1052,7 +1072,7 @@
 	Opt_journal_update, Opt_journal_dev,
 	Opt_journal_checksum, Opt_journal_async_commit,
 	Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
-	Opt_data_err_abort, Opt_data_err_ignore, Opt_mb_history_length,
+	Opt_data_err_abort, Opt_data_err_ignore,
 	Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
 	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
 	Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, Opt_resize,
@@ -1099,7 +1119,6 @@
 	{Opt_data_writeback, "data=writeback"},
 	{Opt_data_err_abort, "data_err=abort"},
 	{Opt_data_err_ignore, "data_err=ignore"},
-	{Opt_mb_history_length, "mb_history_length=%u"},
 	{Opt_offusrjquota, "usrjquota="},
 	{Opt_usrjquota, "usrjquota=%s"},
 	{Opt_offgrpjquota, "grpjquota="},
@@ -1340,13 +1359,6 @@
 		case Opt_data_err_ignore:
 			clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
 			break;
-		case Opt_mb_history_length:
-			if (match_int(&args[0], &option))
-				return 0;
-			if (option < 0)
-				return 0;
-			sbi->s_mb_history_max = option;
-			break;
 #ifdef CONFIG_QUOTA
 		case Opt_usrjquota:
 			qtype = USRQUOTA;
@@ -1646,13 +1658,6 @@
 			EXT4_INODES_PER_GROUP(sb),
 			sbi->s_mount_opt);
 
-	if (EXT4_SB(sb)->s_journal) {
-		ext4_msg(sb, KERN_INFO, "%s journal on %s",
-		       EXT4_SB(sb)->s_journal->j_inode ? "internal" :
-		       "external", EXT4_SB(sb)->s_journal->j_devname);
-	} else {
-		ext4_msg(sb, KERN_INFO, "no journal");
-	}
 	return res;
 }
 
@@ -2197,6 +2202,7 @@
 EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
 EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
 EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
+EXT4_RW_ATTR_SBI_UI(max_writeback_mb_bump, s_max_writeback_mb_bump);
 
 static struct attribute *ext4_attrs[] = {
 	ATTR_LIST(delayed_allocation_blocks),
@@ -2210,6 +2216,7 @@
 	ATTR_LIST(mb_order2_req),
 	ATTR_LIST(mb_stream_req),
 	ATTR_LIST(mb_group_prealloc),
+	ATTR_LIST(max_writeback_mb_bump),
 	NULL,
 };
 
@@ -2413,7 +2420,6 @@
 	sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
 	sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
 	sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
-	sbi->s_mb_history_max = default_mb_history_length;
 
 	set_opt(sbi->s_mount_opt, BARRIER);
 
@@ -2679,6 +2685,7 @@
 	}
 
 	sbi->s_stripe = ext4_get_stripe_size(sbi);
+	sbi->s_max_writeback_mb_bump = 128;
 
 	/*
 	 * set up enough so that it can read an inode
@@ -2798,6 +2805,12 @@
 			clear_opt(sbi->s_mount_opt, NOBH);
 		}
 	}
+	EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten");
+	if (!EXT4_SB(sb)->dio_unwritten_wq) {
+		printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n");
+		goto failed_mount_wq;
+	}
+
 	/*
 	 * The jbd2_journal_load will have done any necessary log recovery,
 	 * so we can safely mount the rest of the filesystem now.
@@ -2849,12 +2862,12 @@
 			 "available");
 	}
 
-	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
+	if (test_opt(sb, DELALLOC) &&
+	    (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) {
 		ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
 			 "requested data journaling mode");
 		clear_opt(sbi->s_mount_opt, DELALLOC);
-	} else if (test_opt(sb, DELALLOC))
-		ext4_msg(sb, KERN_INFO, "delayed allocation enabled");
+	}
 
 	err = ext4_setup_system_zone(sb);
 	if (err) {
@@ -2910,6 +2923,8 @@
 
 failed_mount4:
 	ext4_msg(sb, KERN_ERR, "mount failed");
+	destroy_workqueue(EXT4_SB(sb)->dio_unwritten_wq);
+failed_mount_wq:
 	ext4_release_system_zone(sb);
 	if (sbi->s_journal) {
 		jbd2_journal_destroy(sbi->s_journal);
@@ -3164,9 +3179,7 @@
 			return -EINVAL;
 	}
 
-	if (journal->j_flags & JBD2_BARRIER)
-		ext4_msg(sb, KERN_INFO, "barriers enabled");
-	else
+	if (!(journal->j_flags & JBD2_BARRIER))
 		ext4_msg(sb, KERN_INFO, "barriers disabled");
 
 	if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
@@ -3361,11 +3374,13 @@
 {
 	int ret = 0;
 	tid_t target;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
 	trace_ext4_sync_fs(sb, wait);
-	if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) {
+	flush_workqueue(sbi->dio_unwritten_wq);
+	if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
 		if (wait)
-			jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target);
+			jbd2_log_wait_commit(sbi->s_journal, target);
 	}
 	return ret;
 }
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index adb0e72..7db0979 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -323,7 +323,7 @@
 /* fat/misc.c */
 extern void fat_fs_error(struct super_block *s, const char *fmt, ...)
 	__attribute__ ((format (printf, 2, 3))) __cold;
-extern void fat_clusters_flush(struct super_block *sb);
+extern int fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
 extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts,
 			      __le16 __time, __le16 __date, u8 time_cs);
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 04629d1..76b7961 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -451,12 +451,16 @@
 
 static int fat_sync_fs(struct super_block *sb, int wait)
 {
-	lock_super(sb);
-	fat_clusters_flush(sb);
-	sb->s_dirt = 0;
-	unlock_super(sb);
+	int err = 0;
 
-	return 0;
+	if (sb->s_dirt) {
+		lock_super(sb);
+		sb->s_dirt = 0;
+		err = fat_clusters_flush(sb);
+		unlock_super(sb);
+	}
+
+	return err;
 }
 
 static void fat_put_super(struct super_block *sb)
@@ -812,7 +816,7 @@
 			seq_puts(m, ",shortname=mixed");
 			break;
 		case VFAT_SFN_DISPLAY_LOWER | VFAT_SFN_CREATE_WIN95:
-			/* seq_puts(m, ",shortname=lower"); */
+			seq_puts(m, ",shortname=lower");
 			break;
 		default:
 			seq_puts(m, ",shortname=unknown");
@@ -963,7 +967,7 @@
 	opts->codepage = fat_default_codepage;
 	opts->iocharset = fat_default_iocharset;
 	if (is_vfat) {
-		opts->shortname = VFAT_SFN_DISPLAY_LOWER|VFAT_SFN_CREATE_WIN95;
+		opts->shortname = VFAT_SFN_DISPLAY_WINNT|VFAT_SFN_CREATE_WIN95;
 		opts->rodir = 0;
 	} else {
 		opts->shortname = 0;
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index 4e35be8..0f55f5c 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -43,19 +43,19 @@
 
 /* Flushes the number of free clusters on FAT32 */
 /* XXX: Need to write one per FSINFO block.  Currently only writes 1 */
-void fat_clusters_flush(struct super_block *sb)
+int fat_clusters_flush(struct super_block *sb)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	struct buffer_head *bh;
 	struct fat_boot_fsinfo *fsinfo;
 
 	if (sbi->fat_bits != 32)
-		return;
+		return 0;
 
 	bh = sb_bread(sb, sbi->fsinfo_sector);
 	if (bh == NULL) {
 		printk(KERN_ERR "FAT: bread failed in fat_clusters_flush\n");
-		return;
+		return -EIO;
 	}
 
 	fsinfo = (struct fat_boot_fsinfo *)bh->b_data;
@@ -74,6 +74,8 @@
 		mark_buffer_dirty(bh);
 	}
 	brelse(bh);
+
+	return 0;
 }
 
 /*
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index cb6e835..f565f24 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -499,17 +499,10 @@
 	int charlen;
 
 	if (utf8) {
-		int name_len = strlen(name);
-
-		*outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname);
-
-		/*
-		 * We stripped '.'s before and set len appropriately,
-		 * but utf8s_to_utf16s doesn't care about len
-		 */
-		*outlen -= (name_len - len);
-
-		if (*outlen > 255)
+		*outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
+		if (*outlen < 0)
+			return *outlen;
+		else if (*outlen > 255)
 			return -ENAMETOOLONG;
 
 		op = &outname[*outlen * sizeof(wchar_t)];
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 8e1e5e1..9d5360c 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -41,8 +41,9 @@
 	long nr_pages;
 	struct super_block *sb;
 	enum writeback_sync_modes sync_mode;
-	int for_kupdate;
-	int range_cyclic;
+	int for_kupdate:1;
+	int range_cyclic:1;
+	int for_background:1;
 };
 
 /*
@@ -249,14 +250,25 @@
  *   completion. Caller need not hold sb s_umount semaphore.
  *
  */
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+			 long nr_pages)
 {
 	struct wb_writeback_args args = {
+		.sb		= sb,
 		.sync_mode	= WB_SYNC_NONE,
 		.nr_pages	= nr_pages,
 		.range_cyclic	= 1,
 	};
 
+	/*
+	 * We treat @nr_pages=0 as the special case to do background writeback,
+	 * ie. to sync pages until the background dirty threshold is reached.
+	 */
+	if (!nr_pages) {
+		args.nr_pages = LONG_MAX;
+		args.for_background = 1;
+	}
+
 	bdi_alloc_queue_work(bdi, &args);
 }
 
@@ -310,7 +322,7 @@
 	 * For inodes being constantly redirtied, dirtied_when can get stuck.
 	 * It _appears_ to be in the future, but is actually in distant past.
 	 * This test is necessary to prevent such wrapped-around relative times
-	 * from permanently stopping the whole pdflush writeback.
+	 * from permanently stopping the whole bdi writeback.
 	 */
 	ret = ret && time_before_eq(inode->dirtied_when, jiffies);
 #endif
@@ -324,13 +336,38 @@
 			       struct list_head *dispatch_queue,
 				unsigned long *older_than_this)
 {
+	LIST_HEAD(tmp);
+	struct list_head *pos, *node;
+	struct super_block *sb = NULL;
+	struct inode *inode;
+	int do_sb_sort = 0;
+
 	while (!list_empty(delaying_queue)) {
-		struct inode *inode = list_entry(delaying_queue->prev,
-						struct inode, i_list);
+		inode = list_entry(delaying_queue->prev, struct inode, i_list);
 		if (older_than_this &&
 		    inode_dirtied_after(inode, *older_than_this))
 			break;
-		list_move(&inode->i_list, dispatch_queue);
+		if (sb && sb != inode->i_sb)
+			do_sb_sort = 1;
+		sb = inode->i_sb;
+		list_move(&inode->i_list, &tmp);
+	}
+
+	/* just one sb in list, splice to dispatch_queue and we're done */
+	if (!do_sb_sort) {
+		list_splice(&tmp, dispatch_queue);
+		return;
+	}
+
+	/* Move inodes from one superblock together */
+	while (!list_empty(&tmp)) {
+		inode = list_entry(tmp.prev, struct inode, i_list);
+		sb = inode->i_sb;
+		list_for_each_prev_safe(pos, node, &tmp) {
+			inode = list_entry(pos, struct inode, i_list);
+			if (inode->i_sb == sb)
+				list_move(&inode->i_list, dispatch_queue);
+		}
 	}
 }
 
@@ -439,8 +476,18 @@
 	spin_lock(&inode_lock);
 	inode->i_state &= ~I_SYNC;
 	if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
-		if (!(inode->i_state & I_DIRTY) &&
-		    mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+		if ((inode->i_state & I_DIRTY_PAGES) && wbc->for_kupdate) {
+			/*
+			 * More pages get dirtied by a fast dirtier.
+			 */
+			goto select_queue;
+		} else if (inode->i_state & I_DIRTY) {
+			/*
+			 * At least XFS will redirty the inode during the
+			 * writeback (delalloc) and on io completion (isize).
+			 */
+			redirty_tail(inode);
+		} else if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 			/*
 			 * We didn't write back all the pages.  nfs_writepages()
 			 * sometimes bales out without doing anything. Redirty
@@ -462,6 +509,7 @@
 				 * soon as the queue becomes uncongested.
 				 */
 				inode->i_state |= I_DIRTY_PAGES;
+select_queue:
 				if (wbc->nr_to_write <= 0) {
 					/*
 					 * slice used up: queue for next turn
@@ -484,12 +532,6 @@
 				inode->i_state |= I_DIRTY_PAGES;
 				redirty_tail(inode);
 			}
-		} else if (inode->i_state & I_DIRTY) {
-			/*
-			 * Someone redirtied the inode while were writing back
-			 * the pages.
-			 */
-			redirty_tail(inode);
 		} else if (atomic_read(&inode->i_count)) {
 			/*
 			 * The inode is clean, inuse
@@ -506,6 +548,17 @@
 	return ret;
 }
 
+static void unpin_sb_for_writeback(struct super_block **psb)
+{
+	struct super_block *sb = *psb;
+
+	if (sb) {
+		up_read(&sb->s_umount);
+		put_super(sb);
+		*psb = NULL;
+	}
+}
+
 /*
  * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
  * before calling writeback. So make sure that we do pin it, so it doesn't
@@ -515,11 +568,20 @@
  * 1 if we failed.
  */
 static int pin_sb_for_writeback(struct writeback_control *wbc,
-				   struct inode *inode)
+				struct inode *inode, struct super_block **psb)
 {
 	struct super_block *sb = inode->i_sb;
 
 	/*
+	 * If this sb is already pinned, nothing more to do. If not and
+	 * *psb is non-NULL, unpin the old one first
+	 */
+	if (sb == *psb)
+		return 0;
+	else if (*psb)
+		unpin_sb_for_writeback(psb);
+
+	/*
 	 * Caller must already hold the ref for this
 	 */
 	if (wbc->sync_mode == WB_SYNC_ALL) {
@@ -532,7 +594,7 @@
 	if (down_read_trylock(&sb->s_umount)) {
 		if (sb->s_root) {
 			spin_unlock(&sb_lock);
-			return 0;
+			goto pinned;
 		}
 		/*
 		 * umounted, drop rwsem again and fall through to failure
@@ -543,24 +605,15 @@
 	sb->s_count--;
 	spin_unlock(&sb_lock);
 	return 1;
-}
-
-static void unpin_sb_for_writeback(struct writeback_control *wbc,
-				   struct inode *inode)
-{
-	struct super_block *sb = inode->i_sb;
-
-	if (wbc->sync_mode == WB_SYNC_ALL)
-		return;
-
-	up_read(&sb->s_umount);
-	put_super(sb);
+pinned:
+	*psb = sb;
+	return 0;
 }
 
 static void writeback_inodes_wb(struct bdi_writeback *wb,
 				struct writeback_control *wbc)
 {
-	struct super_block *sb = wbc->sb;
+	struct super_block *sb = wbc->sb, *pin_sb = NULL;
 	const int is_blkdev_sb = sb_is_blkdev_sb(sb);
 	const unsigned long start = jiffies;	/* livelock avoidance */
 
@@ -619,7 +672,7 @@
 		if (inode_dirtied_after(inode, start))
 			break;
 
-		if (pin_sb_for_writeback(wbc, inode)) {
+		if (pin_sb_for_writeback(wbc, inode, &pin_sb)) {
 			requeue_io(inode);
 			continue;
 		}
@@ -628,7 +681,6 @@
 		__iget(inode);
 		pages_skipped = wbc->pages_skipped;
 		writeback_single_inode(inode, wbc);
-		unpin_sb_for_writeback(wbc, inode);
 		if (wbc->pages_skipped != pages_skipped) {
 			/*
 			 * writeback is not making progress due to locked
@@ -648,6 +700,8 @@
 			wbc->more_io = 1;
 	}
 
+	unpin_sb_for_writeback(&pin_sb);
+
 	spin_unlock(&inode_lock);
 	/* Leave any unwritten inodes on b_io */
 }
@@ -706,6 +760,7 @@
 	};
 	unsigned long oldest_jif;
 	long wrote = 0;
+	struct inode *inode;
 
 	if (wbc.for_kupdate) {
 		wbc.older_than_this = &oldest_jif;
@@ -719,20 +774,16 @@
 
 	for (;;) {
 		/*
-		 * Don't flush anything for non-integrity writeback where
-		 * no nr_pages was given
+		 * Stop writeback when nr_pages has been consumed
 		 */
-		if (!args->for_kupdate && args->nr_pages <= 0 &&
-		     args->sync_mode == WB_SYNC_NONE)
+		if (args->nr_pages <= 0)
 			break;
 
 		/*
-		 * If no specific pages were given and this is just a
-		 * periodic background writeout and we are below the
-		 * background dirty threshold, don't do anything
+		 * For background writeout, stop when we are below the
+		 * background dirty threshold
 		 */
-		if (args->for_kupdate && args->nr_pages <= 0 &&
-		    !over_bground_thresh())
+		if (args->for_background && !over_bground_thresh())
 			break;
 
 		wbc.more_io = 0;
@@ -744,13 +795,32 @@
 		wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
 
 		/*
-		 * If we ran out of stuff to write, bail unless more_io got set
+		 * If we consumed everything, see if we have more
 		 */
-		if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
-			if (wbc.more_io && !wbc.for_kupdate)
-				continue;
+		if (wbc.nr_to_write <= 0)
+			continue;
+		/*
+		 * Didn't write everything and we don't have more IO, bail
+		 */
+		if (!wbc.more_io)
 			break;
+		/*
+		 * Did we write something? Try for more
+		 */
+		if (wbc.nr_to_write < MAX_WRITEBACK_PAGES)
+			continue;
+		/*
+		 * Nothing written. Wait for some inode to
+		 * become available for writeback. Otherwise
+		 * we'll just busyloop.
+		 */
+		spin_lock(&inode_lock);
+		if (!list_empty(&wb->b_more_io))  {
+			inode = list_entry(wb->b_more_io.prev,
+						struct inode, i_list);
+			inode_wait_for_writeback(inode);
 		}
+		spin_unlock(&inode_lock);
 	}
 
 	return wrote;
@@ -1060,9 +1130,6 @@
  * If older_than_this is non-NULL, then only write out inodes which
  * had their first dirtying at a time earlier than *older_than_this.
  *
- * If we're a pdlfush thread, then implement pdflush collision avoidance
- * against the entire list.
- *
  * If `bdi' is non-zero then we're being asked to writeback a specific queue.
  * This function assumes that the blockdev superblock's inodes are backed by
  * a variety of queues, so all inodes are searched.  For other superblocks,
@@ -1141,7 +1208,7 @@
 	nr_to_write = nr_dirty + nr_unstable +
 			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
 
-	bdi_writeback_all(sb, nr_to_write);
+	bdi_start_writeback(sb->s_bdi, sb, nr_to_write);
 }
 EXPORT_SYMBOL(writeback_inodes_sb);
 
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index cbc4640..a3492f7 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1313,7 +1313,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct fuse_file_vm_ops = {
+static const struct vm_operations_struct fuse_file_vm_ops = {
 	.close		= fuse_vma_close,
 	.fault		= filemap_fault,
 	.page_mkwrite	= fuse_page_mkwrite,
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 166f38f..4eb308a 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -418,7 +418,7 @@
 	return ret;
 }
 
-static struct vm_operations_struct gfs2_vm_ops = {
+static const struct vm_operations_struct gfs2_vm_ops = {
 	.fault = filemap_fault,
 	.page_mkwrite = gfs2_page_mkwrite,
 };
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 5d70b3e..ca0f5eb 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -643,6 +643,7 @@
 
 int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
 {
+	struct transaction_chp_stats_s *stats;
 	transaction_t *transaction;
 	journal_t *journal;
 	int ret = 0;
@@ -679,6 +680,12 @@
 
 	/* OK, that was the last buffer for the transaction: we can now
 	   safely remove this transaction from the log */
+	stats = &transaction->t_chp_stats;
+	if (stats->cs_chp_time)
+		stats->cs_chp_time = jbd2_time_diff(stats->cs_chp_time,
+						    jiffies);
+	trace_jbd2_checkpoint_stats(journal->j_fs_dev->bd_dev,
+				    transaction->t_tid, stats);
 
 	__jbd2_journal_drop_transaction(journal, transaction);
 	kfree(transaction);
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 26d991d..d4cfd6d 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -410,10 +410,10 @@
 	if (commit_transaction->t_synchronous_commit)
 		write_op = WRITE_SYNC_PLUG;
 	trace_jbd2_commit_locking(journal, commit_transaction);
-	stats.u.run.rs_wait = commit_transaction->t_max_wait;
-	stats.u.run.rs_locked = jiffies;
-	stats.u.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
-						stats.u.run.rs_locked);
+	stats.run.rs_wait = commit_transaction->t_max_wait;
+	stats.run.rs_locked = jiffies;
+	stats.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
+					      stats.run.rs_locked);
 
 	spin_lock(&commit_transaction->t_handle_lock);
 	while (commit_transaction->t_updates) {
@@ -486,9 +486,9 @@
 	jbd2_journal_switch_revoke_table(journal);
 
 	trace_jbd2_commit_flushing(journal, commit_transaction);
-	stats.u.run.rs_flushing = jiffies;
-	stats.u.run.rs_locked = jbd2_time_diff(stats.u.run.rs_locked,
-					       stats.u.run.rs_flushing);
+	stats.run.rs_flushing = jiffies;
+	stats.run.rs_locked = jbd2_time_diff(stats.run.rs_locked,
+					     stats.run.rs_flushing);
 
 	commit_transaction->t_state = T_FLUSH;
 	journal->j_committing_transaction = commit_transaction;
@@ -523,11 +523,11 @@
 	spin_unlock(&journal->j_state_lock);
 
 	trace_jbd2_commit_logging(journal, commit_transaction);
-	stats.u.run.rs_logging = jiffies;
-	stats.u.run.rs_flushing = jbd2_time_diff(stats.u.run.rs_flushing,
-						 stats.u.run.rs_logging);
-	stats.u.run.rs_blocks = commit_transaction->t_outstanding_credits;
-	stats.u.run.rs_blocks_logged = 0;
+	stats.run.rs_logging = jiffies;
+	stats.run.rs_flushing = jbd2_time_diff(stats.run.rs_flushing,
+					       stats.run.rs_logging);
+	stats.run.rs_blocks = commit_transaction->t_outstanding_credits;
+	stats.run.rs_blocks_logged = 0;
 
 	J_ASSERT(commit_transaction->t_nr_buffers <=
 		 commit_transaction->t_outstanding_credits);
@@ -695,7 +695,7 @@
 				submit_bh(write_op, bh);
 			}
 			cond_resched();
-			stats.u.run.rs_blocks_logged += bufs;
+			stats.run.rs_blocks_logged += bufs;
 
 			/* Force a new descriptor to be generated next
                            time round the loop. */
@@ -988,33 +988,30 @@
 	J_ASSERT(commit_transaction->t_state == T_COMMIT);
 
 	commit_transaction->t_start = jiffies;
-	stats.u.run.rs_logging = jbd2_time_diff(stats.u.run.rs_logging,
-						commit_transaction->t_start);
+	stats.run.rs_logging = jbd2_time_diff(stats.run.rs_logging,
+					      commit_transaction->t_start);
 
 	/*
-	 * File the transaction for history
+	 * File the transaction statistics
 	 */
-	stats.ts_type = JBD2_STATS_RUN;
 	stats.ts_tid = commit_transaction->t_tid;
-	stats.u.run.rs_handle_count = commit_transaction->t_handle_count;
-	spin_lock(&journal->j_history_lock);
-	memcpy(journal->j_history + journal->j_history_cur, &stats,
-			sizeof(stats));
-	if (++journal->j_history_cur == journal->j_history_max)
-		journal->j_history_cur = 0;
+	stats.run.rs_handle_count = commit_transaction->t_handle_count;
+	trace_jbd2_run_stats(journal->j_fs_dev->bd_dev,
+			     commit_transaction->t_tid, &stats.run);
 
 	/*
 	 * Calculate overall stats
 	 */
+	spin_lock(&journal->j_history_lock);
 	journal->j_stats.ts_tid++;
-	journal->j_stats.u.run.rs_wait += stats.u.run.rs_wait;
-	journal->j_stats.u.run.rs_running += stats.u.run.rs_running;
-	journal->j_stats.u.run.rs_locked += stats.u.run.rs_locked;
-	journal->j_stats.u.run.rs_flushing += stats.u.run.rs_flushing;
-	journal->j_stats.u.run.rs_logging += stats.u.run.rs_logging;
-	journal->j_stats.u.run.rs_handle_count += stats.u.run.rs_handle_count;
-	journal->j_stats.u.run.rs_blocks += stats.u.run.rs_blocks;
-	journal->j_stats.u.run.rs_blocks_logged += stats.u.run.rs_blocks_logged;
+	journal->j_stats.run.rs_wait += stats.run.rs_wait;
+	journal->j_stats.run.rs_running += stats.run.rs_running;
+	journal->j_stats.run.rs_locked += stats.run.rs_locked;
+	journal->j_stats.run.rs_flushing += stats.run.rs_flushing;
+	journal->j_stats.run.rs_logging += stats.run.rs_logging;
+	journal->j_stats.run.rs_handle_count += stats.run.rs_handle_count;
+	journal->j_stats.run.rs_blocks += stats.run.rs_blocks;
+	journal->j_stats.run.rs_blocks_logged += stats.run.rs_blocks_logged;
 	spin_unlock(&journal->j_history_lock);
 
 	commit_transaction->t_state = T_FINISHED;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 53b86e1..761af77 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -136,10 +136,6 @@
 	journal->j_task = current;
 	wake_up(&journal->j_wait_done_commit);
 
-	printk(KERN_INFO "kjournald2 starting: pid %d, dev %s, "
-	       "commit interval %ld seconds\n", current->pid,
-	       journal->j_devname, journal->j_commit_interval / HZ);
-
 	/*
 	 * And now, wait forever for commit wakeup events.
 	 */
@@ -223,7 +219,8 @@
 {
 	struct task_struct *t;
 
-	t = kthread_run(kjournald2, journal, "kjournald2");
+	t = kthread_run(kjournald2, journal, "jbd2/%s",
+			journal->j_devname);
 	if (IS_ERR(t))
 		return PTR_ERR(t);
 
@@ -679,153 +676,6 @@
 	int max;
 };
 
-static void *jbd2_history_skip_empty(struct jbd2_stats_proc_session *s,
-					struct transaction_stats_s *ts,
-					int first)
-{
-	if (ts == s->stats + s->max)
-		ts = s->stats;
-	if (!first && ts == s->stats + s->start)
-		return NULL;
-	while (ts->ts_type == 0) {
-		ts++;
-		if (ts == s->stats + s->max)
-			ts = s->stats;
-		if (ts == s->stats + s->start)
-			return NULL;
-	}
-	return ts;
-
-}
-
-static void *jbd2_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
-	struct jbd2_stats_proc_session *s = seq->private;
-	struct transaction_stats_s *ts;
-	int l = *pos;
-
-	if (l == 0)
-		return SEQ_START_TOKEN;
-	ts = jbd2_history_skip_empty(s, s->stats + s->start, 1);
-	if (!ts)
-		return NULL;
-	l--;
-	while (l) {
-		ts = jbd2_history_skip_empty(s, ++ts, 0);
-		if (!ts)
-			break;
-		l--;
-	}
-	return ts;
-}
-
-static void *jbd2_seq_history_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	struct jbd2_stats_proc_session *s = seq->private;
-	struct transaction_stats_s *ts = v;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return jbd2_history_skip_empty(s, s->stats + s->start, 1);
-	else
-		return jbd2_history_skip_empty(s, ++ts, 0);
-}
-
-static int jbd2_seq_history_show(struct seq_file *seq, void *v)
-{
-	struct transaction_stats_s *ts = v;
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(seq, "%-4s %-5s %-5s %-5s %-5s %-5s %-5s %-6s %-5s "
-				"%-5s %-5s %-5s %-5s %-5s\n", "R/C", "tid",
-				"wait", "run", "lock", "flush", "log", "hndls",
-				"block", "inlog", "ctime", "write", "drop",
-				"close");
-		return 0;
-	}
-	if (ts->ts_type == JBD2_STATS_RUN)
-		seq_printf(seq, "%-4s %-5lu %-5u %-5u %-5u %-5u %-5u "
-				"%-6lu %-5lu %-5lu\n", "R", ts->ts_tid,
-				jiffies_to_msecs(ts->u.run.rs_wait),
-				jiffies_to_msecs(ts->u.run.rs_running),
-				jiffies_to_msecs(ts->u.run.rs_locked),
-				jiffies_to_msecs(ts->u.run.rs_flushing),
-				jiffies_to_msecs(ts->u.run.rs_logging),
-				ts->u.run.rs_handle_count,
-				ts->u.run.rs_blocks,
-				ts->u.run.rs_blocks_logged);
-	else if (ts->ts_type == JBD2_STATS_CHECKPOINT)
-		seq_printf(seq, "%-4s %-5lu %48s %-5u %-5lu %-5lu %-5lu\n",
-				"C", ts->ts_tid, " ",
-				jiffies_to_msecs(ts->u.chp.cs_chp_time),
-				ts->u.chp.cs_written, ts->u.chp.cs_dropped,
-				ts->u.chp.cs_forced_to_close);
-	else
-		J_ASSERT(0);
-	return 0;
-}
-
-static void jbd2_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations jbd2_seq_history_ops = {
-	.start  = jbd2_seq_history_start,
-	.next   = jbd2_seq_history_next,
-	.stop   = jbd2_seq_history_stop,
-	.show   = jbd2_seq_history_show,
-};
-
-static int jbd2_seq_history_open(struct inode *inode, struct file *file)
-{
-	journal_t *journal = PDE(inode)->data;
-	struct jbd2_stats_proc_session *s;
-	int rc, size;
-
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL)
-		return -ENOMEM;
-	size = sizeof(struct transaction_stats_s) * journal->j_history_max;
-	s->stats = kmalloc(size, GFP_KERNEL);
-	if (s->stats == NULL) {
-		kfree(s);
-		return -ENOMEM;
-	}
-	spin_lock(&journal->j_history_lock);
-	memcpy(s->stats, journal->j_history, size);
-	s->max = journal->j_history_max;
-	s->start = journal->j_history_cur % s->max;
-	spin_unlock(&journal->j_history_lock);
-
-	rc = seq_open(file, &jbd2_seq_history_ops);
-	if (rc == 0) {
-		struct seq_file *m = file->private_data;
-		m->private = s;
-	} else {
-		kfree(s->stats);
-		kfree(s);
-	}
-	return rc;
-
-}
-
-static int jbd2_seq_history_release(struct inode *inode, struct file *file)
-{
-	struct seq_file *seq = file->private_data;
-	struct jbd2_stats_proc_session *s = seq->private;
-
-	kfree(s->stats);
-	kfree(s);
-	return seq_release(inode, file);
-}
-
-static struct file_operations jbd2_seq_history_fops = {
-	.owner		= THIS_MODULE,
-	.open           = jbd2_seq_history_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = jbd2_seq_history_release,
-};
-
 static void *jbd2_seq_info_start(struct seq_file *seq, loff_t *pos)
 {
 	return *pos ? NULL : SEQ_START_TOKEN;
@@ -842,29 +692,29 @@
 
 	if (v != SEQ_START_TOKEN)
 		return 0;
-	seq_printf(seq, "%lu transaction, each upto %u blocks\n",
+	seq_printf(seq, "%lu transaction, each up to %u blocks\n",
 			s->stats->ts_tid,
 			s->journal->j_max_transaction_buffers);
 	if (s->stats->ts_tid == 0)
 		return 0;
 	seq_printf(seq, "average: \n  %ums waiting for transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_wait / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_wait / s->stats->ts_tid));
 	seq_printf(seq, "  %ums running transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_running / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_running / s->stats->ts_tid));
 	seq_printf(seq, "  %ums transaction was being locked\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_locked / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_locked / s->stats->ts_tid));
 	seq_printf(seq, "  %ums flushing data (in ordered mode)\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_flushing / s->stats->ts_tid));
 	seq_printf(seq, "  %ums logging transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_logging / s->stats->ts_tid));
 	seq_printf(seq, "  %lluus average transaction commit time\n",
 		   div_u64(s->journal->j_average_commit_time, 1000));
 	seq_printf(seq, "  %lu handles per transaction\n",
-	    s->stats->u.run.rs_handle_count / s->stats->ts_tid);
+	    s->stats->run.rs_handle_count / s->stats->ts_tid);
 	seq_printf(seq, "  %lu blocks per transaction\n",
-	    s->stats->u.run.rs_blocks / s->stats->ts_tid);
+	    s->stats->run.rs_blocks / s->stats->ts_tid);
 	seq_printf(seq, "  %lu logged blocks per transaction\n",
-	    s->stats->u.run.rs_blocks_logged / s->stats->ts_tid);
+	    s->stats->run.rs_blocks_logged / s->stats->ts_tid);
 	return 0;
 }
 
@@ -934,8 +784,6 @@
 {
 	journal->j_proc_entry = proc_mkdir(journal->j_devname, proc_jbd2_stats);
 	if (journal->j_proc_entry) {
-		proc_create_data("history", S_IRUGO, journal->j_proc_entry,
-				 &jbd2_seq_history_fops, journal);
 		proc_create_data("info", S_IRUGO, journal->j_proc_entry,
 				 &jbd2_seq_info_fops, journal);
 	}
@@ -944,27 +792,9 @@
 static void jbd2_stats_proc_exit(journal_t *journal)
 {
 	remove_proc_entry("info", journal->j_proc_entry);
-	remove_proc_entry("history", journal->j_proc_entry);
 	remove_proc_entry(journal->j_devname, proc_jbd2_stats);
 }
 
-static void journal_init_stats(journal_t *journal)
-{
-	int size;
-
-	if (!proc_jbd2_stats)
-		return;
-
-	journal->j_history_max = 100;
-	size = sizeof(struct transaction_stats_s) * journal->j_history_max;
-	journal->j_history = kzalloc(size, GFP_KERNEL);
-	if (!journal->j_history) {
-		journal->j_history_max = 0;
-		return;
-	}
-	spin_lock_init(&journal->j_history_lock);
-}
-
 /*
  * Management for journal control blocks: functions to create and
  * destroy journal_t structures, and to initialise and read existing
@@ -1009,7 +839,7 @@
 		goto fail;
 	}
 
-	journal_init_stats(journal);
+	spin_lock_init(&journal->j_history_lock);
 
 	return journal;
 fail:
@@ -1115,7 +945,7 @@
 	while ((p = strchr(p, '/')))
 		*p = '!';
 	p = journal->j_devname + strlen(journal->j_devname);
-	sprintf(p, ":%lu", journal->j_inode->i_ino);
+	sprintf(p, "-%lu", journal->j_inode->i_ino);
 	jbd_debug(1,
 		  "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n",
 		  journal, inode->i_sb->s_id, inode->i_ino,
diff --git a/fs/ncpfs/mmap.c b/fs/ncpfs/mmap.c
index 5d8dcb9..15458de 100644
--- a/fs/ncpfs/mmap.c
+++ b/fs/ncpfs/mmap.c
@@ -95,7 +95,7 @@
 	return VM_FAULT_MAJOR;
 }
 
-static struct vm_operations_struct ncp_file_mmap =
+static const struct vm_operations_struct ncp_file_mmap =
 {
 	.fault = ncp_file_mmap_fault,
 };
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 86d6b4d..f5fdd39 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -59,7 +59,7 @@
 static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl);
 static int nfs_setlease(struct file *file, long arg, struct file_lock **fl);
 
-static struct vm_operations_struct nfs_file_vm_ops;
+static const struct vm_operations_struct nfs_file_vm_ops;
 
 const struct file_operations nfs_file_operations = {
 	.llseek		= nfs_file_llseek,
@@ -572,7 +572,7 @@
 	return VM_FAULT_SIGBUS;
 }
 
-static struct vm_operations_struct nfs_file_vm_ops = {
+static const struct vm_operations_struct nfs_file_vm_ops = {
 	.fault = filemap_fault,
 	.page_mkwrite = nfs_vm_page_mkwrite,
 };
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 810770f..29786d3 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1711,6 +1711,8 @@
 
 		if (!(data->flags & NFS_MOUNT_TCP))
 			args->nfs_server.protocol = XPRT_TRANSPORT_UDP;
+		else
+			args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
 		/* N.B. caller will free nfs_server.hostname in all cases */
 		args->nfs_server.hostname = kstrdup(data->hostname, GFP_KERNEL);
 		args->namlen		= data->namlen;
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 6a2711f..5941958 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -36,6 +36,7 @@
 
 void nilfs_btnode_cache_init_once(struct address_space *btnc)
 {
+	memset(btnc, 0, sizeof(*btnc));
 	INIT_RADIX_TREE(&btnc->page_tree, GFP_ATOMIC);
 	spin_lock_init(&btnc->tree_lock);
 	INIT_LIST_HEAD(&btnc->private_list);
diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c
index fc8278c..7d7b498 100644
--- a/fs/nilfs2/file.c
+++ b/fs/nilfs2/file.c
@@ -117,7 +117,7 @@
 	return 0;
 }
 
-struct vm_operations_struct nilfs_file_vm_ops = {
+static const struct vm_operations_struct nilfs_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite	= nilfs_page_mkwrite,
 };
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 2d2c501..5040220 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -400,6 +400,7 @@
 	ii->i_dir_acl = S_ISREG(inode->i_mode) ?
 		0 : le32_to_cpu(raw_inode->i_dir_acl);
 #endif
+	ii->i_dir_start_lookup = 0;
 	ii->i_cno = 0;
 	inode->i_generation = le32_to_cpu(raw_inode->i_generation);
 
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 2224b4d..44a88a9 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -124,10 +124,10 @@
 	while (*s && len > 0) {
 		if (*s & 0x80) {
 			size = utf8_to_utf32(s, len, &u);
-			if (size < 0) {
-				/* Ignore character and move on */
-				size = 1;
-			} else if (u >= PLANE_SIZE) {
+			if (size < 0)
+				return -EINVAL;
+
+			if (u >= PLANE_SIZE) {
 				u -= PLANE_SIZE;
 				*op++ = (wchar_t) (SURROGATE_PAIR |
 						((u >> 10) & SURROGATE_BITS));
diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c
index b606496..3973761 100644
--- a/fs/ocfs2/mmap.c
+++ b/fs/ocfs2/mmap.c
@@ -202,7 +202,7 @@
 	return ret;
 }
 
-static struct vm_operations_struct ocfs2_file_vm_ops = {
+static const struct vm_operations_struct ocfs2_file_vm_ops = {
 	.fault		= ocfs2_fault,
 	.page_mkwrite	= ocfs2_page_mkwrite,
 };
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 0c6bc60..07f77a7 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -322,6 +322,8 @@
 			p->nivcsw);
 }
 
+#ifdef CONFIG_MMU
+
 struct stack_stats {
 	struct vm_area_struct *vma;
 	unsigned long	startpage;
@@ -402,6 +404,11 @@
 		mmput(mm);
 	}
 }
+#else
+static void task_show_stack_usage(struct seq_file *m, struct task_struct *task)
+{
+}
+#endif		/* CONFIG_MMU */
 
 int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task)
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 2524714..60c702b 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -40,7 +40,7 @@
 	struct mutex			mutex;
 	void				*buffer;
 	int				mmapped;
-	struct vm_operations_struct 	*vm_ops;
+	const struct vm_operations_struct *vm_ops;
 	struct file			*file;
 	struct hlist_node		list;
 };
@@ -331,7 +331,7 @@
 }
 #endif
 
-static struct vm_operations_struct bin_vm_ops = {
+static const struct vm_operations_struct bin_vm_ops = {
 	.open		= bin_vma_open,
 	.close		= bin_vma_close,
 	.fault		= bin_fault,
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 2e6481a..1009adc 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1534,7 +1534,7 @@
 	return err;
 }
 
-static struct vm_operations_struct ubifs_file_vm_ops = {
+static const struct vm_operations_struct ubifs_file_vm_ops = {
 	.fault        = filemap_fault,
 	.page_mkwrite = ubifs_vm_page_mkwrite,
 };
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 988d8f8..6293709 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -42,7 +42,7 @@
 
 #include <linux/dcache.h>
 
-static struct vm_operations_struct xfs_file_vm_ops;
+static const struct vm_operations_struct xfs_file_vm_ops;
 
 STATIC ssize_t
 xfs_file_aio_read(
@@ -280,7 +280,7 @@
 	.fsync		= xfs_file_fsync,
 };
 
-static struct vm_operations_struct xfs_file_vm_ops = {
+static const struct vm_operations_struct xfs_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite	= xfs_vm_page_mkwrite,
 };
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 1cef139..3cd9ccd 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -70,7 +70,6 @@
 	ACPI_BUS_TYPE_POWER,
 	ACPI_BUS_TYPE_PROCESSOR,
 	ACPI_BUS_TYPE_THERMAL,
-	ACPI_BUS_TYPE_SYSTEM,
 	ACPI_BUS_TYPE_POWER_BUTTON,
 	ACPI_BUS_TYPE_SLEEP_BUTTON,
 	ACPI_BUS_DEVICE_TYPE_COUNT
@@ -142,10 +141,7 @@
 
 struct acpi_device_flags {
 	u32 dynamic_status:1;
-	u32 hardware_id:1;
-	u32 compatible_ids:1;
 	u32 bus_address:1;
-	u32 unique_id:1;
 	u32 removable:1;
 	u32 ejectable:1;
 	u32 lockable:1;
@@ -154,7 +150,7 @@
 	u32 performance_manageable:1;
 	u32 wake_capable:1;	/* Wakeup(_PRW) supported? */
 	u32 force_power_state:1;
-	u32 reserved:19;
+	u32 reserved:22;
 };
 
 /* File System */
@@ -172,20 +168,23 @@
 typedef char acpi_device_name[40];
 typedef char acpi_device_class[20];
 
+struct acpi_hardware_id {
+	struct list_head list;
+	char *id;
+};
+
 struct acpi_device_pnp {
 	acpi_bus_id bus_id;	/* Object name */
 	acpi_bus_address bus_address;	/* _ADR */
-	char *hardware_id;	/* _HID */
-	struct acpica_device_id_list *cid_list;	/* _CIDs */
 	char *unique_id;	/* _UID */
+	struct list_head ids;		/* _HID and _CIDs */
 	acpi_device_name device_name;	/* Driver-determined */
 	acpi_device_class device_class;	/*        "          */
 };
 
 #define acpi_device_bid(d)	((d)->pnp.bus_id)
 #define acpi_device_adr(d)	((d)->pnp.bus_address)
-#define acpi_device_hid(d)	((d)->pnp.hardware_id)
-#define acpi_device_uid(d)	((d)->pnp.unique_id)
+char *acpi_device_hid(struct acpi_device *device);
 #define acpi_device_name(d)	((d)->pnp.device_name)
 #define acpi_device_class(d)	((d)->pnp.device_class)
 
@@ -262,7 +261,8 @@
 /* Device */
 
 struct acpi_device {
-	acpi_handle handle;
+	int device_type;
+	acpi_handle handle;		/* no handle for fixed hardware */
 	struct acpi_device *parent;
 	struct list_head children;
 	struct list_head node;
@@ -322,6 +322,8 @@
 
 int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
 void acpi_bus_data_handler(acpi_handle handle, void *context);
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+				       unsigned long long *sta);
 int acpi_bus_get_status(struct acpi_device *device);
 int acpi_bus_get_power(acpi_handle handle, int *state);
 int acpi_bus_set_power(acpi_handle handle, int state);
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 29ca8f5..b6e818f 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -721,12 +721,12 @@
 	. = ALIGN(PAGE_SIZE);						\
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
 		INIT_TASK_DATA(inittask)				\
+		NOSAVE_DATA						\
+		PAGE_ALIGNED_DATA(pagealigned)				\
 		CACHELINE_ALIGNED_DATA(cacheline)			\
 		READ_MOSTLY_DATA(cacheline)				\
 		DATA_DATA						\
 		CONSTRUCTORS						\
-		NOSAVE_DATA						\
-		PAGE_ALIGNED_DATA(pagealigned)				\
 	}
 
 #define INIT_TEXT_SECTION(inittext_align)				\
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index ae1e9e1..b69347b 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -387,6 +387,7 @@
  * @get_modes: get mode list for this connector
  * @set_property: property for this connector may need update
  * @destroy: make object go away
+ * @force: notify the driver the connector is forced on
  *
  * Each CRTC may have one or more connectors attached to it.  The functions
  * below allow the core DRM code to control connectors, enumerate available modes,
@@ -401,6 +402,7 @@
 	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 			     uint64_t val);
 	void (*destroy)(struct drm_connector *connector);
+	void (*force)(struct drm_connector *connector);
 };
 
 struct drm_encoder_funcs {
@@ -429,6 +431,13 @@
 	void *helper_private;
 };
 
+enum drm_connector_force {
+	DRM_FORCE_UNSPECIFIED,
+	DRM_FORCE_OFF,
+	DRM_FORCE_ON,         /* force on analog part normally */
+	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
 /**
  * drm_connector - central DRM connector control structure
  * @crtc: CRTC this connector is currently connected to, NULL if none
@@ -478,9 +487,12 @@
 
 	void *helper_private;
 
+	/* forced on connector */
+	enum drm_connector_force force;
 	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
 	uint32_t force_encoder_id;
 	struct drm_encoder *encoder; /* currently active encoder */
+	void *fb_helper_private;
 };
 
 /**
@@ -746,7 +758,7 @@
 extern bool drm_detect_hdmi_monitor(struct edid *edid);
 extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				int hdisplay, int vdisplay, int vrefresh,
-				bool reduced, bool interlaced);
+				bool reduced, bool interlaced, bool margins);
 extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
 				int hdisplay, int vdisplay, int vrefresh,
 				bool interlaced, int margins);
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 4c8daca..ef47dfd 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -39,6 +39,7 @@
 
 #include <linux/fb.h>
 
+#include "drm_fb_helper.h"
 struct drm_crtc_helper_funcs {
 	/*
 	 * Control power levels on the CRTC.  If the mode passed in is
@@ -119,10 +120,11 @@
 	encoder->helper_private = (void *)funcs;
 }
 
-static inline void drm_connector_helper_add(struct drm_connector *connector,
+static inline int drm_connector_helper_add(struct drm_connector *connector,
 					    const struct drm_connector_helper_funcs *funcs)
 {
 	connector->helper_private = (void *)funcs;
+	return drm_fb_helper_add_connector(connector);
 }
 
 extern int drm_helper_resume_force_mode(struct drm_device *dev);
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 88fffbd..4aa5740 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -35,11 +35,30 @@
 	struct drm_mode_set mode_set;
 };
 
+
 struct drm_fb_helper_funcs {
 	void (*gamma_set)(struct drm_crtc *crtc, u16 red, u16 green,
 			  u16 blue, int regno);
 };
 
+/* mode specified on the command line */
+struct drm_fb_helper_cmdline_mode {
+	bool specified;
+	bool refresh_specified;
+	bool bpp_specified;
+	int xres, yres;
+	int bpp;
+	int refresh;
+	bool rb;
+	bool interlace;
+	bool cvt;
+	bool margins;
+};
+
+struct drm_fb_helper_connector {
+	struct drm_fb_helper_cmdline_mode cmdline_mode;
+};
+
 struct drm_fb_helper {
 	struct drm_framebuffer *fb;
 	struct drm_device *dev;
@@ -57,6 +76,8 @@
 						   uint32_t fb_height,
 						   uint32_t surface_width,
 						   uint32_t surface_height,
+						   uint32_t surface_depth,
+						   uint32_t surface_bpp,
 						   struct drm_framebuffer **fb_ptr));
 int drm_fb_helper_init_crtc_count(struct drm_fb_helper *helper, int crtc_count,
 				  int max_conn);
@@ -79,4 +100,7 @@
 			    uint32_t fb_width, uint32_t fb_height);
 void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch);
 
+int drm_fb_helper_add_connector(struct drm_connector *connector);
+int drm_fb_helper_parse_command_line(struct drm_device *dev);
+
 #endif
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 880130f..9101ed6 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -53,7 +53,7 @@
 	int current_memory;
 	bool cant_use_aperture;
 	unsigned long page_mask;
-	struct vm_operations_struct *vm_ops;
+	const struct vm_operations_struct *vm_ops;
 };
 
 /*
diff --git a/arch/arm/include/asm/mach/mmc.h b/include/linux/amba/mmci.h
similarity index 63%
rename from arch/arm/include/asm/mach/mmc.h
rename to include/linux/amba/mmci.h
index b490ecc..6b42417 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/include/linux/amba/mmci.h
@@ -1,17 +1,18 @@
 /*
- *  arch/arm/include/asm/mach/mmc.h
+ *  include/linux/amba/mmci.h
  */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
+#ifndef AMBA_MMCI_H
+#define AMBA_MMCI_H
 
 #include <linux/mmc/host.h>
 
-struct mmc_platform_data {
+struct mmci_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
+	unsigned long capabilities;
 };
 
 #endif
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index dcad0ff..e4836c6b 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -136,12 +136,12 @@
 
 /**
  * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
- * @SSP_CLK_RISING_EDGE: Receive data on rising edge
- * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
+ * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
  */
 enum ssp_spi_clk_phase {
-	SSP_CLK_RISING_EDGE,
-	SSP_CLK_FALLING_EDGE
+	SSP_CLK_FIRST_EDGE,
+	SSP_CLK_SECOND_EDGE
 };
 
 /**
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 0ee33c2..b449e73 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -101,7 +101,8 @@
 		const char *fmt, ...);
 int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
 void bdi_unregister(struct backing_dev_info *bdi);
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+				long nr_pages);
 int bdi_writeback_task(struct bdi_writeback *wb);
 int bdi_has_dirty_io(struct backing_dev_info *bdi);
 
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
index 79ca2da..0f5f578 100644
--- a/include/linux/backlight.h
+++ b/include/linux/backlight.h
@@ -27,6 +27,11 @@
  * Any other use of the locks below is probably wrong.
  */
 
+enum backlight_update_reason {
+	BACKLIGHT_UPDATE_HOTKEY,
+	BACKLIGHT_UPDATE_SYSFS,
+};
+
 struct backlight_device;
 struct fb_info;
 
@@ -100,6 +105,8 @@
 extern struct backlight_device *backlight_device_register(const char *name,
 	struct device *dev, void *devdata, struct backlight_ops *ops);
 extern void backlight_device_unregister(struct backlight_device *bd);
+extern void backlight_force_update(struct backlight_device *bd,
+				   enum backlight_update_reason reason);
 
 #define to_backlight_device(obj) container_of(obj, struct backlight_device, dev)
 
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f847df9..a34bdf5 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -133,6 +133,7 @@
 #define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
 #define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
 #define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
 
 #define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
 #define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 11ab19a..41a59af 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -3,15 +3,15 @@
 
 #include <linux/fs.h>
 
+struct ctl_table;
+struct user_struct;
+
 #ifdef CONFIG_HUGETLB_PAGE
 
 #include <linux/mempolicy.h>
 #include <linux/shm.h>
 #include <asm/tlbflush.h>
 
-struct ctl_table;
-struct user_struct;
-
 int PageHuge(struct page *page);
 
 static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
@@ -163,7 +163,7 @@
 }
 
 extern const struct file_operations hugetlbfs_file_operations;
-extern struct vm_operations_struct hugetlb_vm_ops;
+extern const struct vm_operations_struct hugetlb_vm_ops;
 struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
 				struct user_struct **user, int creat_flags);
 int hugetlb_get_quota(struct address_space *mapping, long delta);
@@ -187,7 +187,11 @@
 
 #define is_file_hugepages(file)			0
 #define set_file_hugepages(file)		BUG()
-#define hugetlb_file_setup(name,size,acct,user,creat)	ERR_PTR(-ENOSYS)
+static inline struct file *hugetlb_file_setup(const char *name, size_t size,
+		int acctflag, struct user_struct **user, int creat_flags)
+{
+	return ERR_PTR(-ENOSYS);
+}
 
 #endif /* !CONFIG_HUGETLBFS */
 
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index b882610..3b1594d 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -78,8 +78,6 @@
 #define IPCCALL(version,op)	((version)<<16 | (op))
 
 #ifdef __KERNEL__
-
-#include <linux/kref.h>
 #include <linux/spinlock.h>
 
 #define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 52695d3..f1011f7 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -464,9 +464,9 @@
  */
 struct transaction_chp_stats_s {
 	unsigned long		cs_chp_time;
-	unsigned long		cs_forced_to_close;
-	unsigned long		cs_written;
-	unsigned long		cs_dropped;
+	__u32			cs_forced_to_close;
+	__u32			cs_written;
+	__u32			cs_dropped;
 };
 
 /* The transaction_t type is the guts of the journaling mechanism.  It
@@ -668,23 +668,16 @@
 	unsigned long		rs_flushing;
 	unsigned long		rs_logging;
 
-	unsigned long		rs_handle_count;
-	unsigned long		rs_blocks;
-	unsigned long		rs_blocks_logged;
+	__u32			rs_handle_count;
+	__u32			rs_blocks;
+	__u32			rs_blocks_logged;
 };
 
 struct transaction_stats_s {
-	int 			ts_type;
 	unsigned long		ts_tid;
-	union {
-		struct transaction_run_stats_s run;
-		struct transaction_chp_stats_s chp;
-	} u;
+	struct transaction_run_stats_s run;
 };
 
-#define JBD2_STATS_RUN		1
-#define JBD2_STATS_CHECKPOINT	2
-
 static inline unsigned long
 jbd2_time_diff(unsigned long start, unsigned long end)
 {
@@ -988,12 +981,6 @@
 	/*
 	 * Journal statistics
 	 */
-	struct transaction_stats_s *j_history;
-	int			j_history_max;
-	int			j_history_cur;
-	/*
-	 * Protect the transactions statistics history
-	 */
 	spinlock_t		j_history_lock;
 	struct proc_dir_entry	*j_proc_entry;
 	struct transaction_stats_s j_stats;
diff --git a/include/linux/kref.h b/include/linux/kref.h
index 0cef6ba..b0cb0eb 100644
--- a/include/linux/kref.h
+++ b/include/linux/kref.h
@@ -16,7 +16,6 @@
 #define _KREF_H_
 
 #include <linux/types.h>
-#include <asm/atomic.h>
 
 struct kref {
 	atomic_t refcount;
diff --git a/include/linux/mfd/wm831x/status.h b/include/linux/mfd/wm831x/status.h
new file mode 100644
index 0000000..6bc090d
--- /dev/null
+++ b/include/linux/mfd/wm831x/status.h
@@ -0,0 +1,34 @@
+/*
+ * include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_STATUS_H__
+#define __MFD_WM831X_STATUS_H__
+
+#define WM831X_LED_SRC_MASK                    0xC000  /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_SHIFT                       14  /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_WIDTH                        2  /* LED_SRC - [15:14] */
+#define WM831X_LED_MODE_MASK                   0x0300  /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_SHIFT                       8  /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_WIDTH                       2  /* LED_MODE - [9:8] */
+#define WM831X_LED_SEQ_LEN_MASK                0x0030  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_SHIFT                    4  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_WIDTH                    2  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_DUR_MASK                    0x000C  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_SHIFT                        2  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_WIDTH                        2  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUTY_CYC_MASK               0x0003  /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_SHIFT                   0  /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_WIDTH                   2  /* LED_DUTY_CYC - [1:0] */
+
+#endif
diff --git a/include/linux/mm.h b/include/linux/mm.h
index df08551..24c3956 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -288,7 +288,7 @@
 #ifdef CONFIG_MMU
 extern int is_vmalloc_or_module_addr(const void *x);
 #else
-static int is_vmalloc_or_module_addr(const void *x)
+static inline int is_vmalloc_or_module_addr(const void *x)
 {
 	return 0;
 }
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 21d6aa4..84a524a 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -171,7 +171,7 @@
 	struct anon_vma *anon_vma;	/* Serialized by page_table_lock */
 
 	/* Function pointers to deal with this struct. */
-	struct vm_operations_struct * vm_ops;
+	const struct vm_operations_struct *vm_ops;
 
 	/* Information about our backing store: */
 	unsigned long vm_pgoff;		/* Offset (within vm_file) in PAGE_SIZE
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index f6b9024..d09db1b 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -40,7 +40,6 @@
 #ifdef __KERNEL__
 
 #include <linux/in.h>
-#include <linux/kref.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
 #include <linux/rbtree.h>
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 368bd70..7b7fbf4 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -361,7 +361,7 @@
 	 *	struct perf_event_header	header;
 	 *	u32				pid, ppid;
 	 *	u32				tid, ptid;
-	 *	{ u64				time;     } && PERF_SAMPLE_TIME
+	 *	u64				time;
 	 * };
 	 */
 	PERF_EVENT_FORK			= 7,
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index acefaf7..3a9d36d 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -357,7 +357,7 @@
 	 *	struct perf_event_header	header;
 	 *	u32				pid, ppid;
 	 *	u32				tid, ptid;
-	 *	{ u64				time;     } && PERF_SAMPLE_TIME
+	 *	u64				time;
 	 * };
 	 */
 	PERF_RECORD_FORK			= 7,
diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h
index 37aaf2b..4e768dd 100644
--- a/include/linux/ramfs.h
+++ b/include/linux/ramfs.h
@@ -17,7 +17,7 @@
 #endif
 
 extern const struct file_operations ramfs_file_operations;
-extern struct vm_operations_struct generic_file_vm_ops;
+extern const struct vm_operations_struct generic_file_vm_ops;
 extern int __init init_rootfs(void);
 
 #endif
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index fe661af..db532ce 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -176,6 +176,9 @@
 /* Qualcomm MSM SoCs */
 #define PORT_MSM	88
 
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX	89
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/spi/lms283gf05.h b/include/linux/spi/lms283gf05.h
new file mode 100644
index 0000000..555d254
--- /dev/null
+++ b/include/linux/spi/lms283gf05.h
@@ -0,0 +1,28 @@
+/*
+ * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
+ *
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
+#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
+
+struct lms283gf05_pdata {
+	unsigned long	reset_gpio;
+	bool		reset_inverted;
+};
+
+#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 660a9de..2aac8a8 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -36,7 +36,7 @@
 #ifndef DECLARE_TRACE
 
 #define TP_PROTO(args...)	args
-#define TP_ARGS(args...)		args
+#define TP_ARGS(args...)	args
 
 #ifdef CONFIG_TRACEPOINTS
 
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 3566129..b086779 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -45,8 +45,16 @@
  *
  * void (*shutdown)(struct tty_struct * tty);
  *
- * 	This routine is called when a particular tty device is closed for
- *	the last time freeing up the resources.
+ * 	This routine is called synchronously when a particular tty device
+ *	is closed for the last time freeing up the resources.
+ *
+ *
+ * void (*cleanup)(struct tty_struct * tty);
+ *
+ *	This routine is called asynchronously when a particular tty device
+ *	is closed for the last time freeing up the resources. This is
+ *	actually the second part of shutdown for routines that might sleep.
+ *
  *
  * int (*write)(struct tty_struct * tty,
  * 		 const unsigned char *buf, int count);
@@ -233,6 +241,7 @@
 	int  (*open)(struct tty_struct * tty, struct file * filp);
 	void (*close)(struct tty_struct * tty, struct file * filp);
 	void (*shutdown)(struct tty_struct *tty);
+	void (*cleanup)(struct tty_struct *tty);
 	int  (*write)(struct tty_struct * tty,
 		      const unsigned char *buf, int count);
 	int  (*put_char)(struct tty_struct *tty, unsigned char ch);
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 9a3b498..d696a69 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -279,7 +279,7 @@
 extern struct pccard_resource_ops pccard_nonstatic_ops;
 
 /* socket drivers are expected to use these callbacks in their .drv struct */
-extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
+extern int pcmcia_socket_dev_suspend(struct device *dev);
 extern int pcmcia_socket_dev_resume(struct device *dev);
 
 /* socket drivers use this callback in their IRQ handler */
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index c1bd8f1..d09550b 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -11,6 +11,7 @@
 struct ext4_allocation_request;
 struct ext4_prealloc_space;
 struct ext4_inode_info;
+struct mpage_da_data;
 
 #define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
 
@@ -236,6 +237,7 @@
 		__field(	char,	for_kupdate		)
 		__field(	char,	for_reclaim		)
 		__field(	char,	range_cyclic		)
+		__field(       pgoff_t,	writeback_index		)
 	),
 
 	TP_fast_assign(
@@ -249,15 +251,17 @@
 		__entry->for_kupdate	= wbc->for_kupdate;
 		__entry->for_reclaim	= wbc->for_reclaim;
 		__entry->range_cyclic	= wbc->range_cyclic;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d",
+	TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->nr_to_write,
 		  __entry->pages_skipped, __entry->range_start,
 		  __entry->range_end, __entry->nonblocking,
 		  __entry->for_kupdate, __entry->for_reclaim,
-		  __entry->range_cyclic)
+		  __entry->range_cyclic,
+		  (unsigned long) __entry->writeback_index)
 );
 
 TRACE_EVENT(ext4_da_write_pages,
@@ -309,6 +313,7 @@
 		__field(	char,	encountered_congestion	)
 		__field(	char,	more_io			)	
 		__field(	char,	no_nrwrite_index_update )
+		__field(       pgoff_t,	writeback_index		)
 	),
 
 	TP_fast_assign(
@@ -320,14 +325,16 @@
 		__entry->encountered_congestion	= wbc->encountered_congestion;
 		__entry->more_io	= wbc->more_io;
 		__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d",
+	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->ret,
 		  __entry->pages_written, __entry->pages_skipped,
 		  __entry->encountered_congestion, __entry->more_io,
-		  __entry->no_nrwrite_index_update)
+		  __entry->no_nrwrite_index_update,
+		  (unsigned long) __entry->writeback_index)
 );
 
 TRACE_EVENT(ext4_da_write_begin,
@@ -737,6 +744,169 @@
 		  __entry->data_blocks, __entry->meta_blocks)
 );
 
+TRACE_EVENT(ext4_mballoc_alloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,	found			)
+		__field(	__u16,	groups			)
+		__field(	__u16,	buddy			)
+		__field(	__u16,	flags			)
+		__field(	__u16,	tail			)
+		__field(	__u8,	cr			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	goal_logical		)
+		__field(	  int,	goal_start		)
+		__field(	__u32, 	goal_group		)
+		__field(	  int,	goal_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->found		= ac->ac_found;
+		__entry->flags		= ac->ac_flags;
+		__entry->groups		= ac->ac_groups_scanned;
+		__entry->buddy		= ac->ac_buddy;
+		__entry->tail		= ac->ac_tail;
+		__entry->cr		= ac->ac_criteria;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->goal_logical	= ac->ac_g_ex.fe_logical;
+		__entry->goal_start	= ac->ac_g_ex.fe_start;
+		__entry->goal_group	= ac->ac_g_ex.fe_group;
+		__entry->goal_len	= ac->ac_g_ex.fe_len;
+		__entry->result_logical	= ac->ac_f_ex.fe_logical;
+		__entry->result_start	= ac->ac_f_ex.fe_start;
+		__entry->result_group	= ac->ac_f_ex.fe_group;
+		__entry->result_len	= ac->ac_f_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu orig %u/%d/%u@%u goal %u/%d/%u@%u "
+		  "result %u/%d/%u@%u blks %u grps %u cr %u flags 0x%04x "
+		  "tail %u broken %u",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->goal_group, __entry->goal_start,
+		  __entry->goal_len, __entry->goal_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical,
+		  __entry->found, __entry->groups, __entry->cr,
+		  __entry->flags, __entry->tail,
+		  __entry->buddy ? 1 << __entry->buddy : 0)
+);
+
+TRACE_EVENT(ext4_mballoc_prealloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu orig %u/%d/%u@%u result %u/%d/%u@%u",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_discard,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_free,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
 #endif /* _TRACE_EXT4_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index b851f0b..3c60b75 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -7,6 +7,9 @@
 #include <linux/jbd2.h>
 #include <linux/tracepoint.h>
 
+struct transaction_chp_stats_s;
+struct transaction_run_stats_s;
+
 TRACE_EVENT(jbd2_checkpoint,
 
 	TP_PROTO(journal_t *journal, int result),
@@ -162,6 +165,81 @@
 		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino)
 );
 
+TRACE_EVENT(jbd2_run_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_run_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	wait		)
+		__field(	unsigned long,	running		)
+		__field(	unsigned long,	locked		)
+		__field(	unsigned long,	flushing	)
+		__field(	unsigned long,	logging		)
+		__field(		__u32,	handle_count	)
+		__field(		__u32,	blocks		)
+		__field(		__u32,	blocks_logged	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->wait		= stats->rs_wait;
+		__entry->running	= stats->rs_running;
+		__entry->locked		= stats->rs_locked;
+		__entry->flushing	= stats->rs_flushing;
+		__entry->logging	= stats->rs_logging;
+		__entry->handle_count	= stats->rs_handle_count;
+		__entry->blocks		= stats->rs_blocks;
+		__entry->blocks_logged	= stats->rs_blocks_logged;
+	),
+
+	TP_printk("dev %s tid %lu wait %u running %u locked %u flushing %u "
+		  "logging %u handle_count %u blocks %u blocks_logged %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->wait),
+		  jiffies_to_msecs(__entry->running),
+		  jiffies_to_msecs(__entry->locked),
+		  jiffies_to_msecs(__entry->flushing),
+		  jiffies_to_msecs(__entry->logging),
+		  __entry->handle_count, __entry->blocks,
+		  __entry->blocks_logged)
+);
+
+TRACE_EVENT(jbd2_checkpoint_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_chp_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	chp_time	)
+		__field(		__u32,	forced_to_close	)
+		__field(		__u32,	written		)
+		__field(		__u32,	dropped		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->chp_time	= stats->cs_chp_time;
+		__entry->forced_to_close= stats->cs_forced_to_close;
+		__entry->written	= stats->cs_written;
+		__entry->dropped	= stats->cs_dropped;
+	),
+
+	TP_printk("dev %s tid %lu chp_time %u forced_to_close %u "
+		  "written %u dropped %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->chp_time),
+		  __entry->forced_to_close, __entry->written, __entry->dropped)
+);
+
 #endif /* _TRACE_JBD2_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index fcfd9a1..e4612db 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -26,7 +26,7 @@
 		__entry->func		= work->func;
 	),
 
-	TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+	TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
 		__entry->thread_pid, __entry->func)
 );
 
@@ -48,7 +48,7 @@
 		__entry->func		= work->func;
 	),
 
-	TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+	TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
 		__entry->thread_pid, __entry->func)
 );
 
diff --git a/ipc/shm.c b/ipc/shm.c
index 9eb1488..464694e 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -55,7 +55,7 @@
 #define shm_file_data(file) (*((struct shm_file_data **)&(file)->private_data))
 
 static const struct file_operations shm_file_operations;
-static struct vm_operations_struct shm_vm_ops;
+static const struct vm_operations_struct shm_vm_ops;
 
 #define shm_ids(ns)	((ns)->ids[IPC_SHM_IDS])
 
@@ -312,7 +312,7 @@
 	.get_unmapped_area	= shm_get_unmapped_area,
 };
 
-static struct vm_operations_struct shm_vm_ops = {
+static const struct vm_operations_struct shm_vm_ops = {
 	.open	= shm_open,	/* callback for a new vm-area open */
 	.close	= shm_close,	/* callback for when the vm-area is released */
 	.fault	= shm_fault,
diff --git a/kernel/futex.c b/kernel/futex.c
index 248dd11..b911adc 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -89,36 +89,36 @@
 	union futex_key key;
 };
 
-/*
- * We use this hashed waitqueue instead of a normal wait_queue_t, so
+/**
+ * struct futex_q - The hashed futex queue entry, one per waiting task
+ * @task:		the task waiting on the futex
+ * @lock_ptr:		the hash bucket lock
+ * @key:		the key the futex is hashed on
+ * @pi_state:		optional priority inheritance state
+ * @rt_waiter:		rt_waiter storage for use with requeue_pi
+ * @requeue_pi_key:	the requeue_pi target futex key
+ * @bitset:		bitset for the optional bitmasked wakeup
+ *
+ * We use this hashed waitqueue, instead of a normal wait_queue_t, so
  * we can wake only the relevant ones (hashed queues may be shared).
  *
  * A futex_q has a woken state, just like tasks have TASK_RUNNING.
  * It is considered woken when plist_node_empty(&q->list) || q->lock_ptr == 0.
  * The order of wakup is always to make the first condition true, then
- * wake up q->waiter, then make the second condition true.
+ * the second.
+ *
+ * PI futexes are typically woken before they are removed from the hash list via
+ * the rt_mutex code. See unqueue_me_pi().
  */
 struct futex_q {
 	struct plist_node list;
-	/* Waiter reference */
+
 	struct task_struct *task;
-
-	/* Which hash list lock to use: */
 	spinlock_t *lock_ptr;
-
-	/* Key which the futex is hashed on: */
 	union futex_key key;
-
-	/* Optional priority inheritance state: */
 	struct futex_pi_state *pi_state;
-
-	/* rt_waiter storage for requeue_pi: */
 	struct rt_mutex_waiter *rt_waiter;
-
-	/* The expected requeue pi target futex key: */
 	union futex_key *requeue_pi_key;
-
-	/* Bitset for the optional bitmasked wakeup */
 	u32 bitset;
 };
 
@@ -198,11 +198,12 @@
 }
 
 /**
- * get_futex_key - Get parameters which are the keys for a futex.
- * @uaddr: virtual address of the futex
- * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
- * @key: address where result is stored.
- * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
+ * get_futex_key() - Get parameters which are the keys for a futex
+ * @uaddr:	virtual address of the futex
+ * @fshared:	0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
+ * @key:	address where result is stored.
+ * @rw:		mapping needs to be read/write (values: VERIFY_READ,
+ * 		VERIFY_WRITE)
  *
  * Returns a negative error code or 0
  * The key words are stored in *key on success.
@@ -288,8 +289,8 @@
 	drop_futex_key_refs(key);
 }
 
-/*
- * fault_in_user_writeable - fault in user address and verify RW access
+/**
+ * fault_in_user_writeable() - Fault in user address and verify RW access
  * @uaddr:	pointer to faulting user space address
  *
  * Slow path to fixup the fault we just took in the atomic write
@@ -309,8 +310,8 @@
 
 /**
  * futex_top_waiter() - Return the highest priority waiter on a futex
- * @hb:     the hash bucket the futex_q's reside in
- * @key:    the futex key (to distinguish it from other futex futex_q's)
+ * @hb:		the hash bucket the futex_q's reside in
+ * @key:	the futex key (to distinguish it from other futex futex_q's)
  *
  * Must be called with the hb lock held.
  */
@@ -588,7 +589,7 @@
 }
 
 /**
- * futex_lock_pi_atomic() - atomic work required to acquire a pi aware futex
+ * futex_lock_pi_atomic() - Atomic work required to acquire a pi aware futex
  * @uaddr:		the pi futex user address
  * @hb:			the pi futex hash bucket
  * @key:		the futex key associated with uaddr and hb
@@ -1011,9 +1012,9 @@
 
 /**
  * requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue
- * q:	the futex_q
- * key:	the key of the requeue target futex
- * hb:  the hash_bucket of the requeue target futex
+ * @q:		the futex_q
+ * @key:	the key of the requeue target futex
+ * @hb:		the hash_bucket of the requeue target futex
  *
  * During futex_requeue, with requeue_pi=1, it is possible to acquire the
  * target futex if it is uncontended or via a lock steal.  Set the futex_q key
@@ -1350,6 +1351,25 @@
 	return hb;
 }
 
+static inline void
+queue_unlock(struct futex_q *q, struct futex_hash_bucket *hb)
+{
+	spin_unlock(&hb->lock);
+	drop_futex_key_refs(&q->key);
+}
+
+/**
+ * queue_me() - Enqueue the futex_q on the futex_hash_bucket
+ * @q:	The futex_q to enqueue
+ * @hb:	The destination hash bucket
+ *
+ * The hb->lock must be held by the caller, and is released here. A call to
+ * queue_me() is typically paired with exactly one call to unqueue_me().  The
+ * exceptions involve the PI related operations, which may use unqueue_me_pi()
+ * or nothing if the unqueue is done as part of the wake process and the unqueue
+ * state is implicit in the state of woken task (see futex_wait_requeue_pi() for
+ * an example).
+ */
 static inline void queue_me(struct futex_q *q, struct futex_hash_bucket *hb)
 {
 	int prio;
@@ -1373,19 +1393,17 @@
 	spin_unlock(&hb->lock);
 }
 
-static inline void
-queue_unlock(struct futex_q *q, struct futex_hash_bucket *hb)
-{
-	spin_unlock(&hb->lock);
-	drop_futex_key_refs(&q->key);
-}
-
-/*
- * queue_me and unqueue_me must be called as a pair, each
- * exactly once.  They are called with the hashed spinlock held.
+/**
+ * unqueue_me() - Remove the futex_q from its futex_hash_bucket
+ * @q:	The futex_q to unqueue
+ *
+ * The q->lock_ptr must not be held by the caller. A call to unqueue_me() must
+ * be paired with exactly one earlier call to queue_me().
+ *
+ * Returns:
+ *   1 - if the futex_q was still queued (and we removed unqueued it)
+ *   0 - if the futex_q was already removed by the waking thread
  */
-
-/* Return 1 if we were still queued (ie. 0 means we were woken) */
 static int unqueue_me(struct futex_q *q)
 {
 	spinlock_t *lock_ptr;
@@ -1638,17 +1656,14 @@
 static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
 				struct hrtimer_sleeper *timeout)
 {
-	queue_me(q, hb);
-
 	/*
-	 * There might have been scheduling since the queue_me(), as we
-	 * cannot hold a spinlock across the get_user() in case it
-	 * faults, and we cannot just set TASK_INTERRUPTIBLE state when
-	 * queueing ourselves into the futex hash. This code thus has to
-	 * rely on the futex_wake() code removing us from hash when it
-	 * wakes us up.
+	 * The task state is guaranteed to be set before another task can
+	 * wake it. set_current_state() is implemented using set_mb() and
+	 * queue_me() calls spin_unlock() upon completion, both serializing
+	 * access to the hash list and forcing another memory barrier.
 	 */
 	set_current_state(TASK_INTERRUPTIBLE);
+	queue_me(q, hb);
 
 	/* Arm the timer */
 	if (timeout) {
@@ -1658,8 +1673,8 @@
 	}
 
 	/*
-	 * !plist_node_empty() is safe here without any lock.
-	 * q.lock_ptr != 0 is not safe, because of ordering against wakeup.
+	 * If we have been removed from the hash list, then another task
+	 * has tried to wake us, and we can skip the call to schedule().
 	 */
 	if (likely(!plist_node_empty(&q->list))) {
 		/*
@@ -2114,12 +2129,12 @@
 
 /**
  * futex_wait_requeue_pi() - Wait on uaddr and take uaddr2
- * @uaddr:	the futex we initialyl wait on (non-pi)
+ * @uaddr:	the futex we initially wait on (non-pi)
  * @fshared:	whether the futexes are shared (1) or not (0).  They must be
  * 		the same type, no requeueing from private to shared, etc.
  * @val:	the expected value of uaddr
  * @abs_time:	absolute timeout
- * @bitset:	32 bit wakeup bitset set by userspace, defaults to all.
+ * @bitset:	32 bit wakeup bitset set by userspace, defaults to all
  * @clockrt:	whether to use CLOCK_REALTIME (1) or CLOCK_MONOTONIC (0)
  * @uaddr2:	the pi futex we will take prior to returning to user-space
  *
@@ -2246,7 +2261,7 @@
 		res = fixup_owner(uaddr2, fshared, &q, !ret);
 		/*
 		 * If fixup_owner() returned an error, proprogate that.  If it
-		 * acquired the lock, clear our -ETIMEDOUT or -EINTR.
+		 * acquired the lock, clear -ETIMEDOUT or -EINTR.
 		 */
 		if (res)
 			ret = (res < 0) ? res : 0;
@@ -2302,9 +2317,9 @@
  */
 
 /**
- * sys_set_robust_list - set the robust-futex list head of a task
- * @head: pointer to the list-head
- * @len: length of the list-head, as userspace expects
+ * sys_set_robust_list() - Set the robust-futex list head of a task
+ * @head:	pointer to the list-head
+ * @len:	length of the list-head, as userspace expects
  */
 SYSCALL_DEFINE2(set_robust_list, struct robust_list_head __user *, head,
 		size_t, len)
@@ -2323,10 +2338,10 @@
 }
 
 /**
- * sys_get_robust_list - get the robust-futex list head of a task
- * @pid: pid of the process [zero for current task]
- * @head_ptr: pointer to a list-head pointer, the kernel fills it in
- * @len_ptr: pointer to a length field, the kernel fills in the header size
+ * sys_get_robust_list() - Get the robust-futex list head of a task
+ * @pid:	pid of the process [zero for current task]
+ * @head_ptr:	pointer to a list-head pointer, the kernel fills it in
+ * @len_ptr:	pointer to a length field, the kernel fills in the header size
  */
 SYSCALL_DEFINE3(get_robust_list, int, pid,
 		struct robust_list_head __user * __user *, head_ptr,
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index e5d98ce..6d70204 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -509,13 +509,14 @@
  * next event
  * Called with interrupts disabled and base->lock held
  */
-static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base)
+static void
+hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
 {
 	int i;
 	struct hrtimer_clock_base *base = cpu_base->clock_base;
-	ktime_t expires;
+	ktime_t expires, expires_next;
 
-	cpu_base->expires_next.tv64 = KTIME_MAX;
+	expires_next.tv64 = KTIME_MAX;
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
 		struct hrtimer *timer;
@@ -531,10 +532,15 @@
 		 */
 		if (expires.tv64 < 0)
 			expires.tv64 = 0;
-		if (expires.tv64 < cpu_base->expires_next.tv64)
-			cpu_base->expires_next = expires;
+		if (expires.tv64 < expires_next.tv64)
+			expires_next = expires;
 	}
 
+	if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64)
+		return;
+
+	cpu_base->expires_next.tv64 = expires_next.tv64;
+
 	if (cpu_base->expires_next.tv64 != KTIME_MAX)
 		tick_program_event(cpu_base->expires_next, 1);
 }
@@ -617,7 +623,7 @@
 	base->clock_base[CLOCK_REALTIME].offset =
 		timespec_to_ktime(realtime_offset);
 
-	hrtimer_force_reprogram(base);
+	hrtimer_force_reprogram(base, 0);
 	spin_unlock(&base->lock);
 }
 
@@ -730,7 +736,8 @@
 static inline int hrtimer_hres_active(void) { return 0; }
 static inline int hrtimer_is_hres_enabled(void) { return 0; }
 static inline int hrtimer_switch_to_hres(void) { return 0; }
-static inline void hrtimer_force_reprogram(struct hrtimer_cpu_base *base) { }
+static inline void
+hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
 static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
 					    struct hrtimer_clock_base *base,
 					    int wakeup)
@@ -873,19 +880,29 @@
 			     struct hrtimer_clock_base *base,
 			     unsigned long newstate, int reprogram)
 {
-	if (timer->state & HRTIMER_STATE_ENQUEUED) {
-		/*
-		 * Remove the timer from the rbtree and replace the
-		 * first entry pointer if necessary.
-		 */
-		if (base->first == &timer->node) {
-			base->first = rb_next(&timer->node);
-			/* Reprogram the clock event device. if enabled */
-			if (reprogram && hrtimer_hres_active())
-				hrtimer_force_reprogram(base->cpu_base);
+	if (!(timer->state & HRTIMER_STATE_ENQUEUED))
+		goto out;
+
+	/*
+	 * Remove the timer from the rbtree and replace the first
+	 * entry pointer if necessary.
+	 */
+	if (base->first == &timer->node) {
+		base->first = rb_next(&timer->node);
+#ifdef CONFIG_HIGH_RES_TIMERS
+		/* Reprogram the clock event device. if enabled */
+		if (reprogram && hrtimer_hres_active()) {
+			ktime_t expires;
+
+			expires = ktime_sub(hrtimer_get_expires(timer),
+					    base->offset);
+			if (base->cpu_base->expires_next.tv64 == expires.tv64)
+				hrtimer_force_reprogram(base->cpu_base, 1);
 		}
-		rb_erase(&timer->node, &base->active);
+#endif
 	}
+	rb_erase(&timer->node, &base->active);
+out:
 	timer->state = newstate;
 }
 
diff --git a/kernel/module.c b/kernel/module.c
index 5a29397..fe748a8 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3091,7 +3091,6 @@
 		   struct modversion_info *ver,
 		   struct kernel_param *kp,
 		   struct kernel_symbol *ks,
-		   struct marker *marker,
 		   struct tracepoint *tp)
 {
 }
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 76ac4db..0f86feb 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -2253,7 +2253,7 @@
 	}
 }
 
-static struct vm_operations_struct perf_mmap_vmops = {
+static const struct vm_operations_struct perf_mmap_vmops = {
 	.open		= perf_mmap_open,
 	.close		= perf_mmap_close,
 	.fault		= perf_mmap_fault,
diff --git a/kernel/relay.c b/kernel/relay.c
index bc18854..760c262 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -60,7 +60,7 @@
 /*
  * vm_ops for relay file mappings.
  */
-static struct vm_operations_struct relay_file_mmap_ops = {
+static const struct vm_operations_struct relay_file_mmap_ops = {
 	.fault = relay_buf_fault,
 	.close = relay_file_mmap_close,
 };
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index ac2e1dc..479ce56 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -127,7 +127,7 @@
 	clock = wrap_max(clock, min_clock);
 	clock = wrap_min(clock, max_clock);
 
-	if (cmpxchg(&scd->clock, old_clock, clock) != old_clock)
+	if (cmpxchg64(&scd->clock, old_clock, clock) != old_clock)
 		goto again;
 
 	return clock;
@@ -163,7 +163,7 @@
 		val = remote_clock;
 	}
 
-	if (cmpxchg(ptr, old_val, val) != old_val)
+	if (cmpxchg64(ptr, old_val, val) != old_val)
 		goto again;
 
 	return val;
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 0911334..5e18c6a 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -394,15 +394,11 @@
 {
 	struct clocksource *cs;
 
-	mutex_lock(&clocksource_mutex);
-
 	list_for_each_entry(cs, &clocksource_list, list)
 		if (cs->resume)
 			cs->resume();
 
 	clocksource_resume_watchdog();
-
-	mutex_unlock(&clocksource_mutex);
 }
 
 /**
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index a142579..46592fe 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1621,8 +1621,10 @@
 		if (!ret) {
 			struct seq_file *m = file->private_data;
 			m->private = iter;
-		} else
+		} else {
+			trace_parser_put(&iter->parser);
 			kfree(iter);
+		}
 	} else
 		file->private_data = iter;
 	mutex_unlock(&ftrace_regex_lock);
@@ -2202,7 +2204,7 @@
 	struct trace_parser *parser;
 	ssize_t ret, read;
 
-	if (!cnt || cnt < 0)
+	if (!cnt)
 		return 0;
 
 	mutex_lock(&ftrace_regex_lock);
@@ -2216,7 +2218,7 @@
 	parser = &iter->parser;
 	read = trace_get_user(parser, ubuf, cnt, ppos);
 
-	if (trace_parser_loaded(parser) &&
+	if (read >= 0 && trace_parser_loaded(parser) &&
 	    !trace_parser_cont(parser)) {
 		ret = ftrace_process_regex(parser->buffer,
 					   parser->idx, enable);
@@ -2552,8 +2554,7 @@
 		   size_t cnt, loff_t *ppos)
 {
 	struct trace_parser parser;
-	size_t read = 0;
-	ssize_t ret;
+	ssize_t read, ret;
 
 	if (!cnt || cnt < 0)
 		return 0;
@@ -2562,29 +2563,31 @@
 
 	if (ftrace_graph_count >= FTRACE_GRAPH_MAX_FUNCS) {
 		ret = -EBUSY;
-		goto out;
+		goto out_unlock;
 	}
 
 	if (trace_parser_get_init(&parser, FTRACE_BUFF_MAX)) {
 		ret = -ENOMEM;
-		goto out;
+		goto out_unlock;
 	}
 
 	read = trace_get_user(&parser, ubuf, cnt, ppos);
 
-	if (trace_parser_loaded((&parser))) {
+	if (read >= 0 && trace_parser_loaded((&parser))) {
 		parser.buffer[parser.idx] = 0;
 
 		/* we allow only one expression at a time */
 		ret = ftrace_set_func(ftrace_graph_funcs, &ftrace_graph_count,
 					parser.buffer);
 		if (ret)
-			goto out;
+			goto out_free;
 	}
 
 	ret = read;
- out:
+
+out_free:
 	trace_parser_put(&parser);
+out_unlock:
 	mutex_unlock(&graph_lock);
 
 	return ret;
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 411af37..4506826 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -415,7 +415,7 @@
 
 	/* read the non-space input */
 	while (cnt && !isspace(ch)) {
-		if (parser->idx < parser->size)
+		if (parser->idx < parser->size - 1)
 			parser->buffer[parser->idx++] = ch;
 		else {
 			ret = -EINVAL;
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 6f03c8a..d128f65 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -232,10 +232,9 @@
 		   size_t cnt, loff_t *ppos)
 {
 	struct trace_parser parser;
-	size_t read = 0;
-	ssize_t ret;
+	ssize_t read, ret;
 
-	if (!cnt || cnt < 0)
+	if (!cnt)
 		return 0;
 
 	ret = tracing_update_buffers();
@@ -247,7 +246,7 @@
 
 	read = trace_get_user(&parser, ubuf, cnt, ppos);
 
-	if (trace_parser_loaded((&parser))) {
+	if (read >= 0 && trace_parser_loaded((&parser))) {
 		int set = 1;
 
 		if (*parser.buffer == '!')
diff --git a/mm/Kconfig b/mm/Kconfig
index 2477607..edd300a 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -244,10 +244,12 @@
 	  This value can be changed after boot using the
 	  /proc/sys/vm/mmap_min_addr tunable.
 
+config ARCH_SUPPORTS_MEMORY_FAILURE
+	bool
 
 config MEMORY_FAILURE
 	depends on MMU
-	depends on X86_MCE
+	depends on ARCH_SUPPORTS_MEMORY_FAILURE
 	bool "Enable recovery from hardware memory errors"
 	help
 	  Enables code to recover from some memory failures on systems
diff --git a/mm/Makefile b/mm/Makefile
index 515fd79..ebf8490 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -5,14 +5,14 @@
 mmu-y			:= nommu.o
 mmu-$(CONFIG_MMU)	:= fremap.o highmem.o madvise.o memory.o mincore.o \
 			   mlock.o mmap.o mprotect.o mremap.o msync.o rmap.o \
-			   vmalloc.o
+			   vmalloc.o pagewalk.o
 
 obj-y			:= bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
 			   maccess.o page_alloc.o page-writeback.o \
 			   readahead.o swap.o truncate.o vmscan.o shmem.o \
 			   prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
 			   page_isolation.o mm_init.o mmu_context.o \
-			   pagewalk.o $(mmu-y)
+			   $(mmu-y)
 obj-y += init-mm.o
 
 obj-$(CONFIG_BOUNCE)	+= bounce.o
diff --git a/mm/filemap.c b/mm/filemap.c
index 6c84e59..ef169f3 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1611,7 +1611,7 @@
 }
 EXPORT_SYMBOL(filemap_fault);
 
-struct vm_operations_struct generic_file_vm_ops = {
+const struct vm_operations_struct generic_file_vm_ops = {
 	.fault		= filemap_fault,
 };
 
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 427dfe3..1888b2d 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -296,7 +296,7 @@
 	}
 }
 
-static struct vm_operations_struct xip_file_vm_ops = {
+static const struct vm_operations_struct xip_file_vm_ops = {
 	.fault	= xip_file_fault,
 };
 
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 6f048fc..5d7601b 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1721,7 +1721,7 @@
 	return 0;
 }
 
-struct vm_operations_struct hugetlb_vm_ops = {
+const struct vm_operations_struct hugetlb_vm_ops = {
 	.fault = hugetlb_vm_op_fault,
 	.open = hugetlb_vm_op_open,
 	.close = hugetlb_vm_op_close,
diff --git a/mm/mmap.c b/mm/mmap.c
index 21d4029..73f5e4b 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2282,7 +2282,7 @@
 {
 }
 
-static struct vm_operations_struct special_mapping_vmops = {
+static const struct vm_operations_struct special_mapping_vmops = {
 	.close = special_mapping_close,
 	.fault = special_mapping_fault,
 };
diff --git a/mm/nommu.c b/mm/nommu.c
index 56a446f..5189b5a 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -79,7 +79,7 @@
 struct rb_root nommu_region_tree = RB_ROOT;
 DECLARE_RWSEM(nommu_region_sem);
 
-struct vm_operations_struct generic_file_vm_ops = {
+const struct vm_operations_struct generic_file_vm_ops = {
 };
 
 /*
@@ -826,7 +826,7 @@
 	int ret;
 
 	/* do the simple checks first */
-	if (flags & MAP_FIXED || addr) {
+	if (flags & MAP_FIXED) {
 		printk(KERN_DEBUG
 		       "%d: Can't do fixed-address/overlay mmap of RAM\n",
 		       current->pid);
@@ -1034,7 +1034,7 @@
 	ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
 	if (ret == 0) {
 		vma->vm_region->vm_top = vma->vm_region->vm_end;
-		return ret;
+		return 0;
 	}
 	if (ret != -ENOSYS)
 		return ret;
@@ -1051,7 +1051,8 @@
  */
 static int do_mmap_private(struct vm_area_struct *vma,
 			   struct vm_region *region,
-			   unsigned long len)
+			   unsigned long len,
+			   unsigned long capabilities)
 {
 	struct page *pages;
 	unsigned long total, point, n, rlen;
@@ -1062,13 +1063,13 @@
 	 * shared mappings on devices or memory
 	 * - VM_MAYSHARE will be set if it may attempt to share
 	 */
-	if (vma->vm_file) {
+	if (capabilities & BDI_CAP_MAP_DIRECT) {
 		ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
 		if (ret == 0) {
 			/* shouldn't return success if we're not sharing */
 			BUG_ON(!(vma->vm_flags & VM_MAYSHARE));
 			vma->vm_region->vm_top = vma->vm_region->vm_end;
-			return ret;
+			return 0;
 		}
 		if (ret != -ENOSYS)
 			return ret;
@@ -1181,9 +1182,6 @@
 
 	kenter(",%lx,%lx,%lx,%lx,%lx", addr, len, prot, flags, pgoff);
 
-	if (!(flags & MAP_FIXED))
-		addr = round_hint_to_min(addr);
-
 	/* decide whether we should attempt the mapping, and if so what sort of
 	 * mapping */
 	ret = validate_mmap_request(file, addr, len, prot, flags, pgoff,
@@ -1193,6 +1191,9 @@
 		return ret;
 	}
 
+	/* we ignore the address hint */
+	addr = 0;
+
 	/* we've determined that we can make the mapping, now translate what we
 	 * now know into VMA flags */
 	vm_flags = determine_vm_flags(file, prot, flags, capabilities);
@@ -1306,7 +1307,7 @@
 		 * - this is the hook for quasi-memory character devices to
 		 *   tell us the location of a shared mapping
 		 */
-		if (file && file->f_op->get_unmapped_area) {
+		if (capabilities & BDI_CAP_MAP_DIRECT) {
 			addr = file->f_op->get_unmapped_area(file, addr, len,
 							     pgoff, flags);
 			if (IS_ERR((void *) addr)) {
@@ -1330,15 +1331,17 @@
 	}
 
 	vma->vm_region = region;
-	add_nommu_region(region);
 
-	/* set up the mapping */
+	/* set up the mapping
+	 * - the region is filled in if BDI_CAP_MAP_DIRECT is still set
+	 */
 	if (file && vma->vm_flags & VM_SHARED)
 		ret = do_mmap_shared_file(vma);
 	else
-		ret = do_mmap_private(vma, region, len);
+		ret = do_mmap_private(vma, region, len, capabilities);
 	if (ret < 0)
-		goto error_put_region;
+		goto error_just_free;
+	add_nommu_region(region);
 
 	/* okay... we have a mapping; now we have to register it */
 	result = vma->vm_start;
@@ -1356,19 +1359,6 @@
 	kleave(" = %lx", result);
 	return result;
 
-error_put_region:
-	__put_nommu_region(region);
-	if (vma) {
-		if (vma->vm_file) {
-			fput(vma->vm_file);
-			if (vma->vm_flags & VM_EXECUTABLE)
-				removed_exe_file_vma(vma->vm_mm);
-		}
-		kmem_cache_free(vm_area_cachep, vma);
-	}
-	kleave(" = %d [pr]", ret);
-	return ret;
-
 error_just_free:
 	up_write(&nommu_region_sem);
 error:
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index d99664e..a3b1409 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -44,18 +44,21 @@
 /*
  * When balance_dirty_pages decides that the caller needs to perform some
  * non-background writeback, this is how many pages it will attempt to write.
- * It should be somewhat larger than RATELIMIT_PAGES to ensure that reasonably
+ * It should be somewhat larger than dirtied pages to ensure that reasonably
  * large amounts of I/O are submitted.
  */
-static inline long sync_writeback_pages(void)
+static inline long sync_writeback_pages(unsigned long dirtied)
 {
-	return ratelimit_pages + ratelimit_pages / 2;
+	if (dirtied < ratelimit_pages)
+		dirtied = ratelimit_pages;
+
+	return dirtied + dirtied / 2;
 }
 
 /* The following parameters are exported via /proc/sys/vm */
 
 /*
- * Start background writeback (via pdflush) at this percentage
+ * Start background writeback (via writeback threads) at this percentage
  */
 int dirty_background_ratio = 10;
 
@@ -474,10 +477,11 @@
  * balance_dirty_pages() must be called by processes which are generating dirty
  * data.  It looks at the number of dirty pages in the machine and will force
  * the caller to perform writeback if the system is over `vm_dirty_ratio'.
- * If we're over `background_thresh' then pdflush is woken to perform some
- * writeout.
+ * If we're over `background_thresh' then the writeback threads are woken to
+ * perform some writeout.
  */
-static void balance_dirty_pages(struct address_space *mapping)
+static void balance_dirty_pages(struct address_space *mapping,
+				unsigned long write_chunk)
 {
 	long nr_reclaimable, bdi_nr_reclaimable;
 	long nr_writeback, bdi_nr_writeback;
@@ -485,7 +489,6 @@
 	unsigned long dirty_thresh;
 	unsigned long bdi_thresh;
 	unsigned long pages_written = 0;
-	unsigned long write_chunk = sync_writeback_pages();
 	unsigned long pause = 1;
 
 	struct backing_dev_info *bdi = mapping->backing_dev_info;
@@ -579,7 +582,7 @@
 		bdi->dirty_exceeded = 0;
 
 	if (writeback_in_progress(bdi))
-		return;		/* pdflush is already working this queue */
+		return;
 
 	/*
 	 * In laptop mode, we wait until hitting the higher threshold before
@@ -590,10 +593,10 @@
 	 * background_thresh, to keep the amount of dirty memory low.
 	 */
 	if ((laptop_mode && pages_written) ||
-	    (!laptop_mode && ((nr_writeback = global_page_state(NR_FILE_DIRTY)
-					  + global_page_state(NR_UNSTABLE_NFS))
+	    (!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
+			       + global_page_state(NR_UNSTABLE_NFS))
 					  > background_thresh)))
-		bdi_start_writeback(bdi, nr_writeback);
+		bdi_start_writeback(bdi, NULL, 0);
 }
 
 void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -640,9 +643,10 @@
 	p =  &__get_cpu_var(bdp_ratelimits);
 	*p += nr_pages_dirtied;
 	if (unlikely(*p >= ratelimit)) {
+		ratelimit = sync_writeback_pages(*p);
 		*p = 0;
 		preempt_enable();
-		balance_dirty_pages(mapping);
+		balance_dirty_pages(mapping, ratelimit);
 		return;
 	}
 	preempt_enable();
diff --git a/mm/percpu.c b/mm/percpu.c
index 43d8cac..4a048ab 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1043,7 +1043,9 @@
  */
 static void *pcpu_alloc(size_t size, size_t align, bool reserved)
 {
+	static int warn_limit = 10;
 	struct pcpu_chunk *chunk;
+	const char *err;
 	int slot, off;
 
 	if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) {
@@ -1059,11 +1061,14 @@
 	if (reserved && pcpu_reserved_chunk) {
 		chunk = pcpu_reserved_chunk;
 		if (size > chunk->contig_hint ||
-		    pcpu_extend_area_map(chunk) < 0)
+		    pcpu_extend_area_map(chunk) < 0) {
+			err = "failed to extend area map of reserved chunk";
 			goto fail_unlock;
+		}
 		off = pcpu_alloc_area(chunk, size, align);
 		if (off >= 0)
 			goto area_found;
+		err = "alloc from reserved chunk failed";
 		goto fail_unlock;
 	}
 
@@ -1080,6 +1085,7 @@
 			case 1:
 				goto restart;	/* pcpu_lock dropped, restart */
 			default:
+				err = "failed to extend area map";
 				goto fail_unlock;
 			}
 
@@ -1093,8 +1099,10 @@
 	spin_unlock_irq(&pcpu_lock);
 
 	chunk = alloc_pcpu_chunk();
-	if (!chunk)
+	if (!chunk) {
+		err = "failed to allocate new chunk";
 		goto fail_unlock_mutex;
+	}
 
 	spin_lock_irq(&pcpu_lock);
 	pcpu_chunk_relocate(chunk, -1);
@@ -1107,6 +1115,7 @@
 	if (pcpu_populate_chunk(chunk, off, size)) {
 		spin_lock_irq(&pcpu_lock);
 		pcpu_free_area(chunk, off);
+		err = "failed to populate";
 		goto fail_unlock;
 	}
 
@@ -1119,6 +1128,13 @@
 	spin_unlock_irq(&pcpu_lock);
 fail_unlock_mutex:
 	mutex_unlock(&pcpu_alloc_mutex);
+	if (warn_limit) {
+		pr_warning("PERCPU: allocation failed, size=%zu align=%zu, "
+			   "%s\n", size, align, err);
+		dump_stack();
+		if (!--warn_limit)
+			pr_info("PERCPU: limit reached, disable warning\n");
+	}
 	return NULL;
 }
 
@@ -1347,6 +1363,10 @@
 	struct pcpu_alloc_info *ai;
 	unsigned int *cpu_map;
 
+	/* this function may be called multiple times */
+	memset(group_map, 0, sizeof(group_map));
+	memset(group_cnt, 0, sizeof(group_map));
+
 	/*
 	 * Determine min_unit_size, alloc_size and max_upa such that
 	 * alloc_size is multiple of atom_size and is the smallest
@@ -1574,6 +1594,7 @@
 int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
 				  void *base_addr)
 {
+	static char cpus_buf[4096] __initdata;
 	static int smap[2], dmap[2];
 	size_t dyn_size = ai->dyn_size;
 	size_t size_sum = ai->static_size + ai->reserved_size + dyn_size;
@@ -1585,17 +1606,26 @@
 	int *unit_map;
 	int group, unit, i;
 
+	cpumask_scnprintf(cpus_buf, sizeof(cpus_buf), cpu_possible_mask);
+
+#define PCPU_SETUP_BUG_ON(cond)	do {					\
+	if (unlikely(cond)) {						\
+		pr_emerg("PERCPU: failed to initialize, %s", #cond);	\
+		pr_emerg("PERCPU: cpu_possible_mask=%s\n", cpus_buf);	\
+		pcpu_dump_alloc_info(KERN_EMERG, ai);			\
+		BUG();							\
+	}								\
+} while (0)
+
 	/* sanity checks */
 	BUILD_BUG_ON(ARRAY_SIZE(smap) >= PCPU_DFL_MAP_ALLOC ||
 		     ARRAY_SIZE(dmap) >= PCPU_DFL_MAP_ALLOC);
-	BUG_ON(ai->nr_groups <= 0);
-	BUG_ON(!ai->static_size);
-	BUG_ON(!base_addr);
-	BUG_ON(ai->unit_size < size_sum);
-	BUG_ON(ai->unit_size & ~PAGE_MASK);
-	BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE);
-
-	pcpu_dump_alloc_info(KERN_DEBUG, ai);
+	PCPU_SETUP_BUG_ON(ai->nr_groups <= 0);
+	PCPU_SETUP_BUG_ON(!ai->static_size);
+	PCPU_SETUP_BUG_ON(!base_addr);
+	PCPU_SETUP_BUG_ON(ai->unit_size < size_sum);
+	PCPU_SETUP_BUG_ON(ai->unit_size & ~PAGE_MASK);
+	PCPU_SETUP_BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE);
 
 	/* process group information and build config tables accordingly */
 	group_offsets = alloc_bootmem(ai->nr_groups * sizeof(group_offsets[0]));
@@ -1604,7 +1634,7 @@
 	unit_off = alloc_bootmem(nr_cpu_ids * sizeof(unit_off[0]));
 
 	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
-		unit_map[cpu] = NR_CPUS;
+		unit_map[cpu] = UINT_MAX;
 	pcpu_first_unit_cpu = NR_CPUS;
 
 	for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) {
@@ -1618,8 +1648,9 @@
 			if (cpu == NR_CPUS)
 				continue;
 
-			BUG_ON(cpu > nr_cpu_ids || !cpu_possible(cpu));
-			BUG_ON(unit_map[cpu] != NR_CPUS);
+			PCPU_SETUP_BUG_ON(cpu > nr_cpu_ids);
+			PCPU_SETUP_BUG_ON(!cpu_possible(cpu));
+			PCPU_SETUP_BUG_ON(unit_map[cpu] != UINT_MAX);
 
 			unit_map[cpu] = unit + i;
 			unit_off[cpu] = gi->base_offset + i * ai->unit_size;
@@ -1632,7 +1663,11 @@
 	pcpu_nr_units = unit;
 
 	for_each_possible_cpu(cpu)
-		BUG_ON(unit_map[cpu] == NR_CPUS);
+		PCPU_SETUP_BUG_ON(unit_map[cpu] == UINT_MAX);
+
+	/* we're done parsing the input, undefine BUG macro and dump config */
+#undef PCPU_SETUP_BUG_ON
+	pcpu_dump_alloc_info(KERN_INFO, ai);
 
 	pcpu_nr_groups = ai->nr_groups;
 	pcpu_group_offsets = group_offsets;
@@ -1782,7 +1817,7 @@
 	void *base = (void *)ULONG_MAX;
 	void **areas = NULL;
 	struct pcpu_alloc_info *ai;
-	size_t size_sum, areas_size;
+	size_t size_sum, areas_size, max_distance;
 	int group, i, rc;
 
 	ai = pcpu_build_alloc_info(reserved_size, dyn_size, atom_size,
@@ -1832,8 +1867,24 @@
 	}
 
 	/* base address is now known, determine group base offsets */
-	for (group = 0; group < ai->nr_groups; group++)
+	max_distance = 0;
+	for (group = 0; group < ai->nr_groups; group++) {
 		ai->groups[group].base_offset = areas[group] - base;
+		max_distance = max(max_distance, ai->groups[group].base_offset);
+	}
+	max_distance += ai->unit_size;
+
+	/* warn if maximum distance is further than 75% of vmalloc space */
+	if (max_distance > (VMALLOC_END - VMALLOC_START) * 3 / 4) {
+		pr_warning("PERCPU: max_distance=0x%lx too large for vmalloc "
+			   "space 0x%lx\n",
+			   max_distance, VMALLOC_END - VMALLOC_START);
+#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK
+		/* and fail if we have fallback */
+		rc = -EINVAL;
+		goto out_free;
+#endif
+	}
 
 	pr_info("PERCPU: Embedded %zu pages/cpu @%p s%zu r%zu d%zu u%zu\n",
 		PFN_DOWN(size_sum), base, ai->static_size, ai->reserved_size,
diff --git a/mm/shmem.c b/mm/shmem.c
index 98631c2..356dd995 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -218,7 +218,7 @@
 static const struct inode_operations shmem_inode_operations;
 static const struct inode_operations shmem_dir_inode_operations;
 static const struct inode_operations shmem_special_inode_operations;
-static struct vm_operations_struct shmem_vm_ops;
+static const struct vm_operations_struct shmem_vm_ops;
 
 static struct backing_dev_info shmem_backing_dev_info  __read_mostly = {
 	.ra_pages	= 0,	/* No readahead */
@@ -1046,8 +1046,9 @@
 	 * sync from ever calling shmem_writepage; but a stacking filesystem
 	 * may use the ->writepage of its underlying filesystem, in which case
 	 * tmpfs should write out to swap only in response to memory pressure,
-	 * and not for pdflush or sync.  However, in those cases, we do still
-	 * want to check if there's a redundant swappage to be discarded.
+	 * and not for the writeback threads or sync.  However, in those cases,
+	 * we do still want to check if there's a redundant swappage to be
+	 * discarded.
 	 */
 	if (wbc->for_reclaim)
 		swap = get_swap_page();
@@ -2497,7 +2498,7 @@
 	.put_super	= shmem_put_super,
 };
 
-static struct vm_operations_struct shmem_vm_ops = {
+static const struct vm_operations_struct shmem_vm_ops = {
 	.fault		= shmem_fault,
 #ifdef CONFIG_NUMA
 	.set_policy     = shmem_set_policy,
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 1219ceb..64e43889 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1709,10 +1709,10 @@
  *
  * If the caller is !__GFP_FS then the probability of a failure is reasonably
  * high - the zone may be full of dirty or under-writeback pages, which this
- * caller can't do much about.  We kick pdflush and take explicit naps in the
- * hope that some of these pages can be written.  But if the allocating task
- * holds filesystem locks which prevent writeout this might not work, and the
- * allocation attempt will fail.
+ * caller can't do much about.  We kick the writeback threads and take explicit
+ * naps in the hope that some of these pages can be written.  But if the
+ * allocating task holds filesystem locks which prevent writeout this might not
+ * work, and the allocation attempt will fail.
  *
  * returns:	0, if no pages reclaimed
  * 		else, the number of pages reclaimed
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 1238949..d7ecca0 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2084,7 +2084,7 @@
 		atomic_dec(&pkt_sk(sk)->mapped);
 }
 
-static struct vm_operations_struct packet_mmap_ops = {
+static const struct vm_operations_struct packet_mmap_ops = {
 	.open	=	packet_mm_open,
 	.close	=	packet_mm_close,
 };
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 4e34d19..b4b48af 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -137,9 +137,9 @@
 	return 0;
 }
 
-static int pxa2xx_ac97_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_ac97_suspend(struct device *dev)
 {
-	struct snd_card *card = platform_get_drvdata(dev);
+	struct snd_card *card = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (card)
@@ -148,9 +148,9 @@
 	return ret;
 }
 
-static int pxa2xx_ac97_resume(struct platform_device *dev)
+static int pxa2xx_ac97_resume(struct device *dev)
 {
-	struct snd_card *card = platform_get_drvdata(dev);
+	struct snd_card *card = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (card)
@@ -159,9 +159,10 @@
 	return ret;
 }
 
-#else
-#define pxa2xx_ac97_suspend	NULL
-#define pxa2xx_ac97_resume	NULL
+static struct dev_pm_ops pxa2xx_ac97_pm_ops = {
+	.suspend	= pxa2xx_ac97_suspend,
+	.resume		= pxa2xx_ac97_resume,
+};
 #endif
 
 static int __devinit pxa2xx_ac97_probe(struct platform_device *dev)
@@ -241,11 +242,12 @@
 static struct platform_driver pxa2xx_ac97_driver = {
 	.probe		= pxa2xx_ac97_probe,
 	.remove		= __devexit_p(pxa2xx_ac97_remove),
-	.suspend	= pxa2xx_ac97_suspend,
-	.resume		= pxa2xx_ac97_resume,
 	.driver		= {
 		.name	= "pxa2xx-ac97",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pxa2xx_ac97_pm_ops,
+#endif
 	},
 };
 
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 561d6d9..ab73edf 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -2985,7 +2985,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct snd_pcm_vm_ops_status =
+static const struct vm_operations_struct snd_pcm_vm_ops_status =
 {
 	.fault =	snd_pcm_mmap_status_fault,
 };
@@ -3024,7 +3024,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct snd_pcm_vm_ops_control =
+static const struct vm_operations_struct snd_pcm_vm_ops_control =
 {
 	.fault =	snd_pcm_mmap_control_fault,
 };
@@ -3094,7 +3094,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct snd_pcm_vm_ops_data =
+static const struct vm_operations_struct snd_pcm_vm_ops_data =
 {
 	.open =		snd_pcm_mmap_data_open,
 	.close =	snd_pcm_mmap_data_close,
@@ -3118,7 +3118,7 @@
  * mmap the DMA buffer on I/O memory area
  */
 #if SNDRV_PCM_INFO_MMAP_IOMEM
-static struct vm_operations_struct snd_pcm_vm_ops_data_mmio =
+static const struct vm_operations_struct snd_pcm_vm_ops_data_mmio =
 {
 	.open =		snd_pcm_mmap_data_open,
 	.close =	snd_pcm_mmap_data_close,
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index fd44946..99f3376 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -154,7 +154,7 @@
 	snd_printdd(KERN_DEBUG "%i\n", atomic_read(&us122l->mmap_count));
 }
 
-static struct vm_operations_struct usb_stream_hwdep_vm_ops = {
+static const struct vm_operations_struct usb_stream_hwdep_vm_ops = {
 	.open = usb_stream_hwdep_vm_open,
 	.fault = usb_stream_hwdep_vm_fault,
 	.close = usb_stream_hwdep_vm_close,
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index f3d8f71..52e04b2 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -53,7 +53,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct us428ctls_vm_ops = {
+static const struct vm_operations_struct us428ctls_vm_ops = {
 	.fault = snd_us428ctls_vm_fault,
 };
 
diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c
index 117946f..4b2304c 100644
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c
@@ -697,7 +697,7 @@
 }
 
 
-static struct vm_operations_struct snd_usX2Y_hwdep_pcm_vm_ops = {
+static const struct vm_operations_struct snd_usX2Y_hwdep_pcm_vm_ops = {
 	.open = snd_usX2Y_hwdep_pcm_vm_open,
 	.close = snd_usX2Y_hwdep_pcm_vm_close,
 	.fault = snd_usX2Y_hwdep_pcm_vm_fault,
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index d69a759..0854f11 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -10,6 +10,7 @@
 perf-top
 perf*.1
 perf*.xml
+perf*.html
 common-cmds.h
 tags
 TAGS
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 16af2d8..e5f6ece 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -338,14 +338,24 @@
 
 static void abs_printout(int counter, double avg)
 {
+	double total, ratio = 0.0;
+
 	fprintf(stderr, " %14.0f  %-24s", avg, event_name(counter));
 
 	if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
-		fprintf(stderr, " # %10.3f IPC  ",
-				avg / avg_stats(&runtime_cycles_stats));
+		total = avg_stats(&runtime_cycles_stats);
+
+		if (total)
+			ratio = avg / total;
+
+		fprintf(stderr, " # %10.3f IPC  ", ratio);
 	} else {
-		fprintf(stderr, " # %10.3f M/sec",
-				1000.0 * avg / avg_stats(&runtime_nsecs_stats));
+		total = avg_stats(&runtime_nsecs_stats);
+
+		if (total)
+			ratio = 1000.0 * avg / total;
+
+		fprintf(stderr, " # %10.3f M/sec", ratio);
 	}
 }
 
diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
index 3d567fe..0d8c85d 100644
--- a/tools/perf/util/module.c
+++ b/tools/perf/util/module.c
@@ -4,6 +4,7 @@
 #include "module.h"
 
 #include <libelf.h>
+#include <libgen.h>
 #include <gelf.h>
 #include <elf.h>
 #include <dirent.h>
@@ -409,35 +410,40 @@
 static int mod_dso__load_module_paths(struct mod_dso *self)
 {
 	struct utsname uts;
-	int count = 0, len;
+	int count = 0, len, err = -1;
 	char *line = NULL;
 	FILE *file;
-	char *path;
+	char *dpath, *dir;
 	size_t n;
 
 	if (uname(&uts) < 0)
-		goto out_failure;
+		return err;
 
 	len = strlen("/lib/modules/");
 	len += strlen(uts.release);
 	len += strlen("/modules.dep");
 
-	path = calloc(1, len);
-	if (path == NULL)
-		goto out_failure;
+	dpath = calloc(1, len + 1);
+	if (dpath == NULL)
+		return err;
 
-	strcat(path, "/lib/modules/");
-	strcat(path, uts.release);
-	strcat(path, "/modules.dep");
+	strcat(dpath, "/lib/modules/");
+	strcat(dpath, uts.release);
+	strcat(dpath, "/modules.dep");
 
-	file = fopen(path, "r");
-	free(path);
+	file = fopen(dpath, "r");
 	if (file == NULL)
 		goto out_failure;
 
+	dir = dirname(dpath);
+	if (!dir)
+		goto out_failure;
+	strcat(dir, "/");
+
 	while (!feof(file)) {
-		char *name, *tmp;
 		struct module *module;
+		char *name, *path, *tmp;
+		FILE *modfile;
 		int line_len;
 
 		line_len = getline(&line, &n, file);
@@ -445,17 +451,41 @@
 			break;
 
 		if (!line)
-			goto out_failure;
+			break;
 
 		line[--line_len] = '\0'; /* \n */
 
-		path = strtok(line, ":");
+		path = strchr(line, ':');
 		if (!path)
-			goto out_failure;
+			break;
+		*path = '\0';
+
+		path = strdup(line);
+		if (!path)
+			break;
+
+		if (!strstr(path, dir)) {
+			if (strncmp(path, "kernel/", 7))
+				break;
+
+			free(path);
+			path = calloc(1, strlen(dir) + strlen(line) + 1);
+			if (!path)
+				break;
+			strcat(path, dir);
+			strcat(path, line);
+		}
+
+		modfile = fopen(path, "r");
+		if (modfile == NULL)
+			break;
+		fclose(modfile);
 
 		name = strdup(path);
-		name = strtok(name, "/");
+		if (!name)
+			break;
 
+		name = strtok(name, "/");
 		tmp = name;
 
 		while (tmp) {
@@ -463,26 +493,25 @@
 			if (tmp)
 				name = tmp;
 		}
-		name = strsep(&name, ".");
 
-		/* Quirk: replace '-' with '_' in sound modules */
+		name = strsep(&name, ".");
+		if (!name)
+			break;
+
+		/* Quirk: replace '-' with '_' in all modules */
 		for (len = strlen(name); len; len--) {
 			if (*(name+len) == '-')
 				*(name+len) = '_';
 		}
 
 		module = module__new(name, path);
-		if (!module) {
-			fprintf(stderr, "load_module_paths: allocation error\n");
-			goto out_failure;
-		}
+		if (!module)
+			break;
 		mod_dso__insert_module(self, module);
 
 		module->sections = sec_dso__new_dso("sections");
-		if (!module->sections) {
-			fprintf(stderr, "load_module_paths: allocation error\n");
-			goto out_failure;
-		}
+		if (!module->sections)
+			break;
 
 		module->active = mod_dso__load_sections(module);
 
@@ -490,13 +519,20 @@
 			count++;
 	}
 
-	free(line);
-	fclose(file);
-
-	return count;
+	if (feof(file))
+		err = count;
+	else
+		fprintf(stderr, "load_module_paths: modules.dep parsing failure!\n");
 
 out_failure:
-	return -1;
+	if (dpath)
+		free(dpath);
+	if (file)
+		fclose(file);
+	if (line)
+		free(line);
+
+	return err;
 }
 
 int mod_dso__load_modules(struct mod_dso *dso)
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 13ab4b8..87c424d 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -165,33 +165,31 @@
 	DIR *sys_dir, *evt_dir;
 	struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
 	char id_buf[4];
-	int sys_dir_fd, fd;
+	int fd;
 	u64 id;
 	char evt_path[MAXPATHLEN];
+	char dir_path[MAXPATHLEN];
 
 	if (valid_debugfs_mount(debugfs_path))
 		return NULL;
 
 	sys_dir = opendir(debugfs_path);
 	if (!sys_dir)
-		goto cleanup;
-	sys_dir_fd = dirfd(sys_dir);
+		return NULL;
 
 	for_each_subsystem(sys_dir, sys_dirent, sys_next) {
-		int dfd = openat(sys_dir_fd, sys_dirent.d_name,
-				 O_RDONLY|O_DIRECTORY), evt_dir_fd;
-		if (dfd == -1)
+
+		snprintf(dir_path, MAXPATHLEN, "%s/%s", debugfs_path,
+			 sys_dirent.d_name);
+		evt_dir = opendir(dir_path);
+		if (!evt_dir)
 			continue;
-		evt_dir = fdopendir(dfd);
-		if (!evt_dir) {
-			close(dfd);
-			continue;
-		}
-		evt_dir_fd = dirfd(evt_dir);
+
 		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
-			snprintf(evt_path, MAXPATHLEN, "%s/id",
+
+			snprintf(evt_path, MAXPATHLEN, "%s/%s/id", dir_path,
 				 evt_dirent.d_name);
-			fd = openat(evt_dir_fd, evt_path, O_RDONLY);
+			fd = open(evt_path, O_RDONLY);
 			if (fd < 0)
 				continue;
 			if (read(fd, id_buf, sizeof(id_buf)) < 0) {
@@ -225,7 +223,6 @@
 		closedir(evt_dir);
 	}
 
-cleanup:
 	closedir(sys_dir);
 	return NULL;
 }
@@ -761,28 +758,24 @@
 {
 	DIR *sys_dir, *evt_dir;
 	struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
-	int sys_dir_fd;
 	char evt_path[MAXPATHLEN];
+	char dir_path[MAXPATHLEN];
 
 	if (valid_debugfs_mount(debugfs_path))
 		return;
 
 	sys_dir = opendir(debugfs_path);
 	if (!sys_dir)
-		goto cleanup;
-	sys_dir_fd = dirfd(sys_dir);
+		return;
 
 	for_each_subsystem(sys_dir, sys_dirent, sys_next) {
-		int dfd = openat(sys_dir_fd, sys_dirent.d_name,
-				 O_RDONLY|O_DIRECTORY), evt_dir_fd;
-		if (dfd == -1)
+
+		snprintf(dir_path, MAXPATHLEN, "%s/%s", debugfs_path,
+			 sys_dirent.d_name);
+		evt_dir = opendir(dir_path);
+		if (!evt_dir)
 			continue;
-		evt_dir = fdopendir(dfd);
-		if (!evt_dir) {
-			close(dfd);
-			continue;
-		}
-		evt_dir_fd = dirfd(evt_dir);
+
 		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
 			snprintf(evt_path, MAXPATHLEN, "%s:%s",
 				 sys_dirent.d_name, evt_dirent.d_name);
@@ -791,8 +784,6 @@
 		}
 		closedir(evt_dir);
 	}
-
-cleanup:
 	closedir(sys_dir);
 }
 
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index fd3d9c8..559fb06 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -833,7 +833,7 @@
 	struct mod_dso *mods = mod_dso__new_dso("modules");
 	struct module *pos;
 	struct rb_node *next;
-	int err;
+	int err, count = 0;
 
 	err = mod_dso__load_modules(mods);
 
@@ -852,14 +852,16 @@
 			break;
 
 		next = rb_next(&pos->rb_node);
+		count += err;
 	}
 
 	if (err < 0) {
 		mod_dso__delete_modules(mods);
 		mod_dso__delete_self(mods);
+		return err;
 	}
 
-	return err;
+	return count;
 }
 
 static inline void dso__fill_symbol_holes(struct dso *self)
@@ -913,8 +915,15 @@
 
 	if (vmlinux) {
 		err = dso__load_vmlinux(self, vmlinux, filter, v);
-		if (err > 0 && use_modules)
-			err = dso__load_modules(self, filter, v);
+		if (err > 0 && use_modules) {
+			int syms = dso__load_modules(self, filter, v);
+
+			if (syms < 0) {
+				fprintf(stderr, "dso__load_modules failed!\n");
+				return syms;
+			}
+			err += syms;
+		}
 	}
 
 	if (err <= 0)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 034a798..b5e7e3f 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1713,7 +1713,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct kvm_vcpu_vm_ops = {
+static const struct vm_operations_struct kvm_vcpu_vm_ops = {
 	.fault = kvm_vcpu_fault,
 };
 
@@ -2317,7 +2317,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct kvm_vm_vm_ops = {
+static const struct vm_operations_struct kvm_vm_vm_ops = {
 	.fault = kvm_vm_fault,
 };