[PATCH] MCA/INIT: use per cpu stacks
The bulk of the change. Use per cpu MCA/INIT stacks. Change the SAL
to OS state (sos) to be per process. Do all the assembler work on the
MCA/INIT stacks, leaving the original stack alone. Pass per cpu state
data to the C handlers for MCA and INIT, which also means changing the
mca_drv interfaces slightly. Lots of verification on whether the
original stack is usable before converting it to a sleeping process.
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index 7d1ae29..f6a2342 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -211,17 +211,41 @@
#endif
BLANK();
- DEFINE(IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET,
- offsetof (struct ia64_mca_cpu, proc_state_dump));
- DEFINE(IA64_MCA_CPU_STACK_OFFSET,
- offsetof (struct ia64_mca_cpu, stack));
- DEFINE(IA64_MCA_CPU_STACKFRAME_OFFSET,
- offsetof (struct ia64_mca_cpu, stackframe));
- DEFINE(IA64_MCA_CPU_RBSTORE_OFFSET,
- offsetof (struct ia64_mca_cpu, rbstore));
+ DEFINE(IA64_MCA_CPU_MCA_STACK_OFFSET,
+ offsetof (struct ia64_mca_cpu, mca_stack));
DEFINE(IA64_MCA_CPU_INIT_STACK_OFFSET,
offsetof (struct ia64_mca_cpu, init_stack));
BLANK();
+ DEFINE(IA64_SAL_OS_STATE_COMMON_OFFSET,
+ offsetof (struct ia64_sal_os_state, sal_ra));
+ DEFINE(IA64_SAL_OS_STATE_OS_GP_OFFSET,
+ offsetof (struct ia64_sal_os_state, os_gp));
+ DEFINE(IA64_SAL_OS_STATE_PAL_MIN_STATE_OFFSET,
+ offsetof (struct ia64_sal_os_state, pal_min_state));
+ DEFINE(IA64_SAL_OS_STATE_PROC_STATE_PARAM_OFFSET,
+ offsetof (struct ia64_sal_os_state, proc_state_param));
+ DEFINE(IA64_SAL_OS_STATE_SIZE,
+ sizeof (struct ia64_sal_os_state));
+ DEFINE(IA64_PMSA_GR_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_gr));
+ DEFINE(IA64_PMSA_BANK1_GR_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_bank1_gr));
+ DEFINE(IA64_PMSA_PR_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_pr));
+ DEFINE(IA64_PMSA_BR0_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_br0));
+ DEFINE(IA64_PMSA_RSC_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_rsc));
+ DEFINE(IA64_PMSA_IIP_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_iip));
+ DEFINE(IA64_PMSA_IPSR_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_ipsr));
+ DEFINE(IA64_PMSA_IFS_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_ifs));
+ DEFINE(IA64_PMSA_XIP_OFFSET,
+ offsetof (struct pal_min_state_area_s, pmsa_xip));
+ BLANK();
+
/* used by fsys_gettimeofday in arch/ia64/kernel/fsys.S */
DEFINE(IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET, offsetof (struct time_interpolator, addr));
DEFINE(IA64_TIME_INTERPOLATOR_SOURCE_OFFSET, offsetof (struct time_interpolator, source));
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 8d48420..6dc726a 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -48,6 +48,9 @@
* Delete dead variables and functions.
* Reorder to remove the need for forward declarations and to consolidate
* related code.
+ *
+ * 2005-08-12 Keith Owens <kaos@sgi.com>
+ * Convert MCA/INIT handlers to use per event stacks and SAL/OS state.
*/
#include <linux/config.h>
#include <linux/types.h>
@@ -77,6 +80,8 @@
#include <asm/irq.h>
#include <asm/hw_irq.h>
+#include "entry.h"
+
#if defined(IA64_MCA_DEBUG_INFO)
# define IA64_MCA_DEBUG(fmt...) printk(fmt)
#else
@@ -84,9 +89,7 @@
#endif
/* Used by mca_asm.S */
-ia64_mca_sal_to_os_state_t ia64_sal_to_os_handoff_state;
-ia64_mca_os_to_sal_state_t ia64_os_to_sal_handoff_state;
-u64 ia64_mca_serialize;
+u32 ia64_mca_serialize;
DEFINE_PER_CPU(u64, ia64_mca_data); /* == __per_cpu_mca[smp_processor_id()] */
DEFINE_PER_CPU(u64, ia64_mca_per_cpu_pte); /* PTE to map per-CPU area */
DEFINE_PER_CPU(u64, ia64_mca_pal_pte); /* PTE to map PAL code */
@@ -95,8 +98,10 @@
unsigned long __per_cpu_mca[NR_CPUS];
/* In mca_asm.S */
-extern void ia64_monarch_init_handler (void);
-extern void ia64_slave_init_handler (void);
+extern void ia64_os_init_dispatch_monarch (void);
+extern void ia64_os_init_dispatch_slave (void);
+
+static int monarch_cpu = -1;
static ia64_mc_info_t ia64_mc_info;
@@ -234,7 +239,8 @@
* This function retrieves a specified error record type from SAL
* and wakes up any processes waiting for error records.
*
- * Inputs : sal_info_type (Type of error record MCA/CMC/CPE/INIT)
+ * Inputs : sal_info_type (Type of error record MCA/CMC/CPE)
+ * FIXME: remove MCA and irq_safe.
*/
static void
ia64_mca_log_sal_error_record(int sal_info_type)
@@ -242,7 +248,7 @@
u8 *buffer;
sal_log_record_header_t *rh;
u64 size;
- int irq_safe = sal_info_type != SAL_INFO_TYPE_MCA && sal_info_type != SAL_INFO_TYPE_INIT;
+ int irq_safe = sal_info_type != SAL_INFO_TYPE_MCA;
#ifdef IA64_MCA_DEBUG_INFO
static const char * const rec_name[] = { "MCA", "INIT", "CMC", "CPE" };
#endif
@@ -330,182 +336,6 @@
#endif /* CONFIG_ACPI */
-static void
-show_min_state (pal_min_state_area_t *minstate)
-{
- u64 iip = minstate->pmsa_iip + ((struct ia64_psr *)(&minstate->pmsa_ipsr))->ri;
- u64 xip = minstate->pmsa_xip + ((struct ia64_psr *)(&minstate->pmsa_xpsr))->ri;
-
- printk("NaT bits\t%016lx\n", minstate->pmsa_nat_bits);
- printk("pr\t\t%016lx\n", minstate->pmsa_pr);
- printk("b0\t\t%016lx ", minstate->pmsa_br0); print_symbol("%s\n", minstate->pmsa_br0);
- printk("ar.rsc\t\t%016lx\n", minstate->pmsa_rsc);
- printk("cr.iip\t\t%016lx ", iip); print_symbol("%s\n", iip);
- printk("cr.ipsr\t\t%016lx\n", minstate->pmsa_ipsr);
- printk("cr.ifs\t\t%016lx\n", minstate->pmsa_ifs);
- printk("xip\t\t%016lx ", xip); print_symbol("%s\n", xip);
- printk("xpsr\t\t%016lx\n", minstate->pmsa_xpsr);
- printk("xfs\t\t%016lx\n", minstate->pmsa_xfs);
- printk("b1\t\t%016lx ", minstate->pmsa_br1);
- print_symbol("%s\n", minstate->pmsa_br1);
-
- printk("\nstatic registers r0-r15:\n");
- printk(" r0- 3 %016lx %016lx %016lx %016lx\n",
- 0UL, minstate->pmsa_gr[0], minstate->pmsa_gr[1], minstate->pmsa_gr[2]);
- printk(" r4- 7 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_gr[3], minstate->pmsa_gr[4],
- minstate->pmsa_gr[5], minstate->pmsa_gr[6]);
- printk(" r8-11 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_gr[7], minstate->pmsa_gr[8],
- minstate->pmsa_gr[9], minstate->pmsa_gr[10]);
- printk("r12-15 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_gr[11], minstate->pmsa_gr[12],
- minstate->pmsa_gr[13], minstate->pmsa_gr[14]);
-
- printk("\nbank 0:\n");
- printk("r16-19 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank0_gr[0], minstate->pmsa_bank0_gr[1],
- minstate->pmsa_bank0_gr[2], minstate->pmsa_bank0_gr[3]);
- printk("r20-23 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank0_gr[4], minstate->pmsa_bank0_gr[5],
- minstate->pmsa_bank0_gr[6], minstate->pmsa_bank0_gr[7]);
- printk("r24-27 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank0_gr[8], minstate->pmsa_bank0_gr[9],
- minstate->pmsa_bank0_gr[10], minstate->pmsa_bank0_gr[11]);
- printk("r28-31 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank0_gr[12], minstate->pmsa_bank0_gr[13],
- minstate->pmsa_bank0_gr[14], minstate->pmsa_bank0_gr[15]);
-
- printk("\nbank 1:\n");
- printk("r16-19 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank1_gr[0], minstate->pmsa_bank1_gr[1],
- minstate->pmsa_bank1_gr[2], minstate->pmsa_bank1_gr[3]);
- printk("r20-23 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank1_gr[4], minstate->pmsa_bank1_gr[5],
- minstate->pmsa_bank1_gr[6], minstate->pmsa_bank1_gr[7]);
- printk("r24-27 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank1_gr[8], minstate->pmsa_bank1_gr[9],
- minstate->pmsa_bank1_gr[10], minstate->pmsa_bank1_gr[11]);
- printk("r28-31 %016lx %016lx %016lx %016lx\n",
- minstate->pmsa_bank1_gr[12], minstate->pmsa_bank1_gr[13],
- minstate->pmsa_bank1_gr[14], minstate->pmsa_bank1_gr[15]);
-}
-
-static void
-fetch_min_state (pal_min_state_area_t *ms, struct pt_regs *pt, struct switch_stack *sw)
-{
- u64 *dst_banked, *src_banked, bit, shift, nat_bits;
- int i;
-
- /*
- * First, update the pt-regs and switch-stack structures with the contents stored
- * in the min-state area:
- */
- if (((struct ia64_psr *) &ms->pmsa_ipsr)->ic == 0) {
- pt->cr_ipsr = ms->pmsa_xpsr;
- pt->cr_iip = ms->pmsa_xip;
- pt->cr_ifs = ms->pmsa_xfs;
- } else {
- pt->cr_ipsr = ms->pmsa_ipsr;
- pt->cr_iip = ms->pmsa_iip;
- pt->cr_ifs = ms->pmsa_ifs;
- }
- pt->ar_rsc = ms->pmsa_rsc;
- pt->pr = ms->pmsa_pr;
- pt->r1 = ms->pmsa_gr[0];
- pt->r2 = ms->pmsa_gr[1];
- pt->r3 = ms->pmsa_gr[2];
- sw->r4 = ms->pmsa_gr[3];
- sw->r5 = ms->pmsa_gr[4];
- sw->r6 = ms->pmsa_gr[5];
- sw->r7 = ms->pmsa_gr[6];
- pt->r8 = ms->pmsa_gr[7];
- pt->r9 = ms->pmsa_gr[8];
- pt->r10 = ms->pmsa_gr[9];
- pt->r11 = ms->pmsa_gr[10];
- pt->r12 = ms->pmsa_gr[11];
- pt->r13 = ms->pmsa_gr[12];
- pt->r14 = ms->pmsa_gr[13];
- pt->r15 = ms->pmsa_gr[14];
- dst_banked = &pt->r16; /* r16-r31 are contiguous in struct pt_regs */
- src_banked = ms->pmsa_bank1_gr;
- for (i = 0; i < 16; ++i)
- dst_banked[i] = src_banked[i];
- pt->b0 = ms->pmsa_br0;
- sw->b1 = ms->pmsa_br1;
-
- /* construct the NaT bits for the pt-regs structure: */
-# define PUT_NAT_BIT(dst, addr) \
- do { \
- bit = nat_bits & 1; nat_bits >>= 1; \
- shift = ((unsigned long) addr >> 3) & 0x3f; \
- dst = ((dst) & ~(1UL << shift)) | (bit << shift); \
- } while (0)
-
- /* Rotate the saved NaT bits such that bit 0 corresponds to pmsa_gr[0]: */
- shift = ((unsigned long) &ms->pmsa_gr[0] >> 3) & 0x3f;
- nat_bits = (ms->pmsa_nat_bits >> shift) | (ms->pmsa_nat_bits << (64 - shift));
-
- PUT_NAT_BIT(sw->caller_unat, &pt->r1);
- PUT_NAT_BIT(sw->caller_unat, &pt->r2);
- PUT_NAT_BIT(sw->caller_unat, &pt->r3);
- PUT_NAT_BIT(sw->ar_unat, &sw->r4);
- PUT_NAT_BIT(sw->ar_unat, &sw->r5);
- PUT_NAT_BIT(sw->ar_unat, &sw->r6);
- PUT_NAT_BIT(sw->ar_unat, &sw->r7);
- PUT_NAT_BIT(sw->caller_unat, &pt->r8); PUT_NAT_BIT(sw->caller_unat, &pt->r9);
- PUT_NAT_BIT(sw->caller_unat, &pt->r10); PUT_NAT_BIT(sw->caller_unat, &pt->r11);
- PUT_NAT_BIT(sw->caller_unat, &pt->r12); PUT_NAT_BIT(sw->caller_unat, &pt->r13);
- PUT_NAT_BIT(sw->caller_unat, &pt->r14); PUT_NAT_BIT(sw->caller_unat, &pt->r15);
- nat_bits >>= 16; /* skip over bank0 NaT bits */
- PUT_NAT_BIT(sw->caller_unat, &pt->r16); PUT_NAT_BIT(sw->caller_unat, &pt->r17);
- PUT_NAT_BIT(sw->caller_unat, &pt->r18); PUT_NAT_BIT(sw->caller_unat, &pt->r19);
- PUT_NAT_BIT(sw->caller_unat, &pt->r20); PUT_NAT_BIT(sw->caller_unat, &pt->r21);
- PUT_NAT_BIT(sw->caller_unat, &pt->r22); PUT_NAT_BIT(sw->caller_unat, &pt->r23);
- PUT_NAT_BIT(sw->caller_unat, &pt->r24); PUT_NAT_BIT(sw->caller_unat, &pt->r25);
- PUT_NAT_BIT(sw->caller_unat, &pt->r26); PUT_NAT_BIT(sw->caller_unat, &pt->r27);
- PUT_NAT_BIT(sw->caller_unat, &pt->r28); PUT_NAT_BIT(sw->caller_unat, &pt->r29);
- PUT_NAT_BIT(sw->caller_unat, &pt->r30); PUT_NAT_BIT(sw->caller_unat, &pt->r31);
-}
-
-static void
-init_handler_platform (pal_min_state_area_t *ms,
- struct pt_regs *pt, struct switch_stack *sw)
-{
- struct unw_frame_info info;
-
- /* if a kernel debugger is available call it here else just dump the registers */
-
- /*
- * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be
- * generated via the BMC's command-line interface, but since the console is on the
- * same serial line, the user will need some time to switch out of the BMC before
- * the dump begins.
- */
- printk("Delaying for 5 seconds...\n");
- udelay(5*1000000);
- show_min_state(ms);
-
- printk("Backtrace of current task (pid %d, %s)\n", current->pid, current->comm);
- fetch_min_state(ms, pt, sw);
- unw_init_from_interruption(&info, current, pt, sw);
- ia64_do_show_stack(&info, NULL);
-
- if (read_trylock(&tasklist_lock)) {
- struct task_struct *g, *t;
- do_each_thread (g, t) {
- if (t == current)
- continue;
-
- printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm);
- show_stack(t, NULL);
- } while_each_thread (g, t);
- }
-
- printk("\nINIT dump complete. Please reboot now.\n");
- while (1); /* hang city if no debugger */
-}
-
#ifdef CONFIG_ACPI
/*
* ia64_mca_register_cpev
@@ -648,42 +478,6 @@
}
/*
- * ia64_mca_wakeup_ipi_wait
- *
- * Wait for the inter-cpu interrupt to be sent by the
- * monarch processor once it is done with handling the
- * MCA.
- *
- * Inputs : None
- * Outputs : None
- */
-static void
-ia64_mca_wakeup_ipi_wait(void)
-{
- int irr_num = (IA64_MCA_WAKEUP_VECTOR >> 6);
- int irr_bit = (IA64_MCA_WAKEUP_VECTOR & 0x3f);
- u64 irr = 0;
-
- do {
- switch(irr_num) {
- case 0:
- irr = ia64_getreg(_IA64_REG_CR_IRR0);
- break;
- case 1:
- irr = ia64_getreg(_IA64_REG_CR_IRR1);
- break;
- case 2:
- irr = ia64_getreg(_IA64_REG_CR_IRR2);
- break;
- case 3:
- irr = ia64_getreg(_IA64_REG_CR_IRR3);
- break;
- }
- cpu_relax();
- } while (!(irr & (1UL << irr_bit))) ;
-}
-
-/*
* ia64_mca_wakeup
*
* Send an inter-cpu interrupt to wake-up a particular cpu
@@ -748,11 +542,9 @@
*/
ia64_sal_mc_rendez();
- /* Wait for the wakeup IPI from the monarch
- * This waiting is done by polling on the wakeup-interrupt
- * vector bit in the processor's IRRs
- */
- ia64_mca_wakeup_ipi_wait();
+ /* Wait for the monarch cpu to exit. */
+ while (monarch_cpu != -1)
+ cpu_relax(); /* spin until monarch leaves */
/* Enable all interrupts */
local_irq_restore(flags);
@@ -780,53 +572,13 @@
return IRQ_HANDLED;
}
-/*
- * ia64_return_to_sal_check
- *
- * This is function called before going back from the OS_MCA handler
- * to the OS_MCA dispatch code which finally takes the control back
- * to the SAL.
- * The main purpose of this routine is to setup the OS_MCA to SAL
- * return state which can be used by the OS_MCA dispatch code
- * just before going back to SAL.
- *
- * Inputs : None
- * Outputs : None
- */
-
-static void
-ia64_return_to_sal_check(int recover)
-{
-
- /* Copy over some relevant stuff from the sal_to_os_mca_handoff
- * so that it can be used at the time of os_mca_to_sal_handoff
- */
- ia64_os_to_sal_handoff_state.imots_sal_gp =
- ia64_sal_to_os_handoff_state.imsto_sal_gp;
-
- ia64_os_to_sal_handoff_state.imots_sal_check_ra =
- ia64_sal_to_os_handoff_state.imsto_sal_check_ra;
-
- if (recover)
- ia64_os_to_sal_handoff_state.imots_os_status = IA64_MCA_CORRECTED;
- else
- ia64_os_to_sal_handoff_state.imots_os_status = IA64_MCA_COLD_BOOT;
-
- /* Default = tell SAL to return to same context */
- ia64_os_to_sal_handoff_state.imots_context = IA64_MCA_SAME_CONTEXT;
-
- ia64_os_to_sal_handoff_state.imots_new_min_state =
- (u64 *)ia64_sal_to_os_handoff_state.pal_min_state;
-
-}
-
/* Function pointer for extra MCA recovery */
int (*ia64_mca_ucmc_extension)
- (void*,ia64_mca_sal_to_os_state_t*,ia64_mca_os_to_sal_state_t*)
+ (void*,struct ia64_sal_os_state*)
= NULL;
int
-ia64_reg_MCA_extension(void *fn)
+ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *))
{
if (ia64_mca_ucmc_extension)
return 1;
@@ -845,8 +597,321 @@
EXPORT_SYMBOL(ia64_reg_MCA_extension);
EXPORT_SYMBOL(ia64_unreg_MCA_extension);
+
+static inline void
+copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat)
+{
+ u64 fslot, tslot, nat;
+ *tr = *fr;
+ fslot = ((unsigned long)fr >> 3) & 63;
+ tslot = ((unsigned long)tr >> 3) & 63;
+ *tnat &= ~(1UL << tslot);
+ nat = (fnat >> fslot) & 1;
+ *tnat |= (nat << tslot);
+}
+
+/* On entry to this routine, we are running on the per cpu stack, see
+ * mca_asm.h. The original stack has not been touched by this event. Some of
+ * the original stack's registers will be in the RBS on this stack. This stack
+ * also contains a partial pt_regs and switch_stack, the rest of the data is in
+ * PAL minstate.
+ *
+ * The first thing to do is modify the original stack to look like a blocked
+ * task so we can run backtrace on the original task. Also mark the per cpu
+ * stack as current to ensure that we use the correct task state, it also means
+ * that we can do backtrace on the MCA/INIT handler code itself.
+ */
+
+static task_t *
+ia64_mca_modify_original_stack(struct pt_regs *regs,
+ const struct switch_stack *sw,
+ struct ia64_sal_os_state *sos,
+ const char *type)
+{
+ char *p, comm[sizeof(current->comm)];
+ ia64_va va;
+ extern char ia64_leave_kernel[]; /* Need asm address, not function descriptor */
+ const pal_min_state_area_t *ms = sos->pal_min_state;
+ task_t *previous_current;
+ struct pt_regs *old_regs;
+ struct switch_stack *old_sw;
+ unsigned size = sizeof(struct pt_regs) +
+ sizeof(struct switch_stack) + 16;
+ u64 *old_bspstore, *old_bsp;
+ u64 *new_bspstore, *new_bsp;
+ u64 old_unat, old_rnat, new_rnat, nat;
+ u64 slots, loadrs = regs->loadrs;
+ u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1];
+ u64 ar_bspstore = regs->ar_bspstore;
+ u64 ar_bsp = regs->ar_bspstore + (loadrs >> 16);
+ const u64 *bank;
+ const char *msg;
+ int cpu = smp_processor_id();
+
+ previous_current = curr_task(cpu);
+ set_curr_task(cpu, current);
+ if ((p = strchr(current->comm, ' ')))
+ *p = '\0';
+
+ /* Best effort attempt to cope with MCA/INIT delivered while in
+ * physical mode.
+ */
+ regs->cr_ipsr = ms->pmsa_ipsr;
+ if (ia64_psr(regs)->dt == 0) {
+ va.l = r12;
+ if (va.f.reg == 0) {
+ va.f.reg = 7;
+ r12 = va.l;
+ }
+ va.l = r13;
+ if (va.f.reg == 0) {
+ va.f.reg = 7;
+ r13 = va.l;
+ }
+ }
+ if (ia64_psr(regs)->rt == 0) {
+ va.l = ar_bspstore;
+ if (va.f.reg == 0) {
+ va.f.reg = 7;
+ ar_bspstore = va.l;
+ }
+ va.l = ar_bsp;
+ if (va.f.reg == 0) {
+ va.f.reg = 7;
+ ar_bsp = va.l;
+ }
+ }
+
+ /* mca_asm.S ia64_old_stack() cannot assume that the dirty registers
+ * have been copied to the old stack, the old stack may fail the
+ * validation tests below. So ia64_old_stack() must restore the dirty
+ * registers from the new stack. The old and new bspstore probably
+ * have different alignments, so loadrs calculated on the old bsp
+ * cannot be used to restore from the new bsp. Calculate a suitable
+ * loadrs for the new stack and save it in the new pt_regs, where
+ * ia64_old_stack() can get it.
+ */
+ old_bspstore = (u64 *)ar_bspstore;
+ old_bsp = (u64 *)ar_bsp;
+ slots = ia64_rse_num_regs(old_bspstore, old_bsp);
+ new_bspstore = (u64 *)((u64)current + IA64_RBS_OFFSET);
+ new_bsp = ia64_rse_skip_regs(new_bspstore, slots);
+ regs->loadrs = (new_bsp - new_bspstore) * 8 << 16;
+
+ /* Verify the previous stack state before we change it */
+ if (user_mode(regs)) {
+ msg = "occurred in user space";
+ goto no_mod;
+ }
+ if (r13 != sos->prev_IA64_KR_CURRENT) {
+ msg = "inconsistent previous current and r13";
+ goto no_mod;
+ }
+ if ((r12 - r13) >= KERNEL_STACK_SIZE) {
+ msg = "inconsistent r12 and r13";
+ goto no_mod;
+ }
+ if ((ar_bspstore - r13) >= KERNEL_STACK_SIZE) {
+ msg = "inconsistent ar.bspstore and r13";
+ goto no_mod;
+ }
+ va.p = old_bspstore;
+ if (va.f.reg < 5) {
+ msg = "old_bspstore is in the wrong region";
+ goto no_mod;
+ }
+ if ((ar_bsp - r13) >= KERNEL_STACK_SIZE) {
+ msg = "inconsistent ar.bsp and r13";
+ goto no_mod;
+ }
+ size += (ia64_rse_skip_regs(old_bspstore, slots) - old_bspstore) * 8;
+ if (ar_bspstore + size > r12) {
+ msg = "no room for blocked state";
+ goto no_mod;
+ }
+
+ /* Change the comm field on the MCA/INT task to include the pid that
+ * was interrupted, it makes for easier debugging. If that pid was 0
+ * (swapper or nested MCA/INIT) then use the start of the previous comm
+ * field suffixed with its cpu.
+ */
+ if (previous_current->pid)
+ snprintf(comm, sizeof(comm), "%s %d",
+ current->comm, previous_current->pid);
+ else {
+ int l;
+ if ((p = strchr(previous_current->comm, ' ')))
+ l = p - previous_current->comm;
+ else
+ l = strlen(previous_current->comm);
+ snprintf(comm, sizeof(comm), "%s %*s %d",
+ current->comm, l, previous_current->comm,
+ previous_current->thread_info->cpu);
+ }
+ memcpy(current->comm, comm, sizeof(current->comm));
+
+ /* Make the original task look blocked. First stack a struct pt_regs,
+ * describing the state at the time of interrupt. mca_asm.S built a
+ * partial pt_regs, copy it and fill in the blanks using minstate.
+ */
+ p = (char *)r12 - sizeof(*regs);
+ old_regs = (struct pt_regs *)p;
+ memcpy(old_regs, regs, sizeof(*regs));
+ /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use
+ * pmsa_{xip,xpsr,xfs}
+ */
+ if (ia64_psr(regs)->ic) {
+ old_regs->cr_iip = ms->pmsa_iip;
+ old_regs->cr_ipsr = ms->pmsa_ipsr;
+ old_regs->cr_ifs = ms->pmsa_ifs;
+ } else {
+ old_regs->cr_iip = ms->pmsa_xip;
+ old_regs->cr_ipsr = ms->pmsa_xpsr;
+ old_regs->cr_ifs = ms->pmsa_xfs;
+ }
+ old_regs->pr = ms->pmsa_pr;
+ old_regs->b0 = ms->pmsa_br0;
+ old_regs->loadrs = loadrs;
+ old_regs->ar_rsc = ms->pmsa_rsc;
+ old_unat = old_regs->ar_unat;
+ copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &old_regs->r1, &old_unat);
+ copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &old_regs->r2, &old_unat);
+ copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &old_regs->r3, &old_unat);
+ copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &old_regs->r8, &old_unat);
+ copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &old_regs->r9, &old_unat);
+ copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &old_regs->r10, &old_unat);
+ copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &old_regs->r11, &old_unat);
+ copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &old_regs->r12, &old_unat);
+ copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &old_regs->r13, &old_unat);
+ copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &old_regs->r14, &old_unat);
+ copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &old_regs->r15, &old_unat);
+ if (ia64_psr(old_regs)->bn)
+ bank = ms->pmsa_bank1_gr;
+ else
+ bank = ms->pmsa_bank0_gr;
+ copy_reg(&bank[16-16], ms->pmsa_nat_bits, &old_regs->r16, &old_unat);
+ copy_reg(&bank[17-16], ms->pmsa_nat_bits, &old_regs->r17, &old_unat);
+ copy_reg(&bank[18-16], ms->pmsa_nat_bits, &old_regs->r18, &old_unat);
+ copy_reg(&bank[19-16], ms->pmsa_nat_bits, &old_regs->r19, &old_unat);
+ copy_reg(&bank[20-16], ms->pmsa_nat_bits, &old_regs->r20, &old_unat);
+ copy_reg(&bank[21-16], ms->pmsa_nat_bits, &old_regs->r21, &old_unat);
+ copy_reg(&bank[22-16], ms->pmsa_nat_bits, &old_regs->r22, &old_unat);
+ copy_reg(&bank[23-16], ms->pmsa_nat_bits, &old_regs->r23, &old_unat);
+ copy_reg(&bank[24-16], ms->pmsa_nat_bits, &old_regs->r24, &old_unat);
+ copy_reg(&bank[25-16], ms->pmsa_nat_bits, &old_regs->r25, &old_unat);
+ copy_reg(&bank[26-16], ms->pmsa_nat_bits, &old_regs->r26, &old_unat);
+ copy_reg(&bank[27-16], ms->pmsa_nat_bits, &old_regs->r27, &old_unat);
+ copy_reg(&bank[28-16], ms->pmsa_nat_bits, &old_regs->r28, &old_unat);
+ copy_reg(&bank[29-16], ms->pmsa_nat_bits, &old_regs->r29, &old_unat);
+ copy_reg(&bank[30-16], ms->pmsa_nat_bits, &old_regs->r30, &old_unat);
+ copy_reg(&bank[31-16], ms->pmsa_nat_bits, &old_regs->r31, &old_unat);
+
+ /* Next stack a struct switch_stack. mca_asm.S built a partial
+ * switch_stack, copy it and fill in the blanks using pt_regs and
+ * minstate.
+ *
+ * In the synthesized switch_stack, b0 points to ia64_leave_kernel,
+ * ar.pfs is set to 0.
+ *
+ * unwind.c::unw_unwind() does special processing for interrupt frames.
+ * It checks if the PRED_NON_SYSCALL predicate is set, if the predicate
+ * is clear then unw_unwind() does _not_ adjust bsp over pt_regs. Not
+ * that this is documented, of course. Set PRED_NON_SYSCALL in the
+ * switch_stack on the original stack so it will unwind correctly when
+ * unwind.c reads pt_regs.
+ *
+ * thread.ksp is updated to point to the synthesized switch_stack.
+ */
+ p -= sizeof(struct switch_stack);
+ old_sw = (struct switch_stack *)p;
+ memcpy(old_sw, sw, sizeof(*sw));
+ old_sw->caller_unat = old_unat;
+ old_sw->ar_fpsr = old_regs->ar_fpsr;
+ copy_reg(&ms->pmsa_gr[4-1], ms->pmsa_nat_bits, &old_sw->r4, &old_unat);
+ copy_reg(&ms->pmsa_gr[5-1], ms->pmsa_nat_bits, &old_sw->r5, &old_unat);
+ copy_reg(&ms->pmsa_gr[6-1], ms->pmsa_nat_bits, &old_sw->r6, &old_unat);
+ copy_reg(&ms->pmsa_gr[7-1], ms->pmsa_nat_bits, &old_sw->r7, &old_unat);
+ old_sw->b0 = (u64)ia64_leave_kernel;
+ old_sw->b1 = ms->pmsa_br1;
+ old_sw->ar_pfs = 0;
+ old_sw->ar_unat = old_unat;
+ old_sw->pr = old_regs->pr | (1UL << PRED_NON_SYSCALL);
+ previous_current->thread.ksp = (u64)p - 16;
+
+ /* Finally copy the original stack's registers back to its RBS.
+ * Registers from ar.bspstore through ar.bsp at the time of the event
+ * are in the current RBS, copy them back to the original stack. The
+ * copy must be done register by register because the original bspstore
+ * and the current one have different alignments, so the saved RNAT
+ * data occurs at different places.
+ *
+ * mca_asm does cover, so the old_bsp already includes all registers at
+ * the time of MCA/INIT. It also does flushrs, so all registers before
+ * this function have been written to backing store on the MCA/INIT
+ * stack.
+ */
+ new_rnat = ia64_get_rnat(ia64_rse_rnat_addr(new_bspstore));
+ old_rnat = regs->ar_rnat;
+ while (slots--) {
+ if (ia64_rse_is_rnat_slot(new_bspstore)) {
+ new_rnat = ia64_get_rnat(new_bspstore++);
+ }
+ if (ia64_rse_is_rnat_slot(old_bspstore)) {
+ *old_bspstore++ = old_rnat;
+ old_rnat = 0;
+ }
+ nat = (new_rnat >> ia64_rse_slot_num(new_bspstore)) & 1UL;
+ old_rnat &= ~(1UL << ia64_rse_slot_num(old_bspstore));
+ old_rnat |= (nat << ia64_rse_slot_num(old_bspstore));
+ *old_bspstore++ = *new_bspstore++;
+ }
+ old_sw->ar_bspstore = (unsigned long)old_bspstore;
+ old_sw->ar_rnat = old_rnat;
+
+ sos->prev_task = previous_current;
+ return previous_current;
+
+no_mod:
+ printk(KERN_INFO "cpu %d, %s %s, original stack not modified\n",
+ smp_processor_id(), type, msg);
+ return previous_current;
+}
+
+/* The monarch/slave interaction is based on monarch_cpu and requires that all
+ * slaves have entered rendezvous before the monarch leaves. If any cpu has
+ * not entered rendezvous yet then wait a bit. The assumption is that any
+ * slave that has not rendezvoused after a reasonable time is never going to do
+ * so. In this context, slave includes cpus that respond to the MCA rendezvous
+ * interrupt, as well as cpus that receive the INIT slave event.
+ */
+
+static void
+ia64_wait_for_slaves(int monarch)
+{
+ int c, wait = 0;
+ for_each_online_cpu(c) {
+ if (c == monarch)
+ continue;
+ if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) {
+ udelay(1000); /* short wait first */
+ wait = 1;
+ break;
+ }
+ }
+ if (!wait)
+ return;
+ for_each_online_cpu(c) {
+ if (c == monarch)
+ continue;
+ if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) {
+ udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */
+ break;
+ }
+ }
+}
+
/*
- * ia64_mca_ucmc_handler
+ * ia64_mca_handler
*
* This is uncorrectable machine check handler called from OS_MCA
* dispatch code which is in turn called from SAL_CHECK().
@@ -857,16 +922,28 @@
* further MCA logging is enabled by clearing logs.
* Monarch also has the duty of sending wakeup-IPIs to pull the
* slave processors out of rendezvous spinloop.
- *
- * Inputs : None
- * Outputs : None
*/
void
-ia64_mca_ucmc_handler(void)
+ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
+ struct ia64_sal_os_state *sos)
{
pal_processor_state_info_t *psp = (pal_processor_state_info_t *)
- &ia64_sal_to_os_handoff_state.proc_state_param;
- int recover;
+ &sos->proc_state_param;
+ int recover, cpu = smp_processor_id();
+ task_t *previous_current;
+
+ oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */
+ previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA");
+ monarch_cpu = cpu;
+ ia64_wait_for_slaves(cpu);
+
+ /* Wakeup all the processors which are spinning in the rendezvous loop.
+ * They will leave SAL, then spin in the OS with interrupts disabled
+ * until this monarch cpu leaves the MCA handler. That gets control
+ * back to the OS so we can backtrace the other cpus, backtrace when
+ * spinning in SAL does not work.
+ */
+ ia64_mca_wakeup_all();
/* Get the MCA error record and log it */
ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
@@ -874,25 +951,20 @@
/* TLB error is only exist in this SAL error record */
recover = (psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc))
/* other error recovery */
- || (ia64_mca_ucmc_extension
+ || (ia64_mca_ucmc_extension
&& ia64_mca_ucmc_extension(
IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA),
- &ia64_sal_to_os_handoff_state,
- &ia64_os_to_sal_handoff_state));
+ sos));
if (recover) {
sal_log_record_header_t *rh = IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA);
rh->severity = sal_log_severity_corrected;
ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA);
+ sos->os_status = IA64_MCA_CORRECTED;
}
- /*
- * Wakeup all the processors which are spinning in the rendezvous
- * loop.
- */
- ia64_mca_wakeup_all();
- /* Return to SAL */
- ia64_return_to_sal_check(recover);
+ set_curr_task(cpu, previous_current);
+ monarch_cpu = -1;
}
static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd, NULL);
@@ -1116,34 +1188,114 @@
/*
* C portion of the OS INIT handler
*
- * Called from ia64_monarch_init_handler
+ * Called from ia64_os_init_dispatch
*
- * Inputs: pointer to pt_regs where processor info was saved.
+ * Inputs: pointer to pt_regs where processor info was saved. SAL/OS state for
+ * this event. This code is used for both monarch and slave INIT events, see
+ * sos->monarch.
*
- * Returns:
- * 0 if SAL must warm boot the System
- * 1 if SAL must return to interrupted context using PAL_MC_RESUME
- *
+ * All INIT events switch to the INIT stack and change the previous process to
+ * blocked status. If one of the INIT events is the monarch then we are
+ * probably processing the nmi button/command. Use the monarch cpu to dump all
+ * the processes. The slave INIT events all spin until the monarch cpu
+ * returns. We can also get INIT slave events for MCA, in which case the MCA
+ * process is the monarch.
*/
-void
-ia64_init_handler (struct pt_regs *pt, struct switch_stack *sw)
-{
- pal_min_state_area_t *ms;
- oops_in_progress = 1; /* avoid deadlock in printk, but it makes recovery dodgy */
+void
+ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
+ struct ia64_sal_os_state *sos)
+{
+ static atomic_t slaves;
+ static atomic_t monarchs;
+ task_t *previous_current;
+ int cpu = smp_processor_id(), c;
+ struct task_struct *g, *t;
+
+ oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */
console_loglevel = 15; /* make sure printks make it to console */
- printk(KERN_INFO "Entered OS INIT handler. PSP=%lx\n",
- ia64_sal_to_os_handoff_state.proc_state_param);
+ printk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n",
+ sos->proc_state_param, cpu, sos->monarch);
+ salinfo_log_wakeup(SAL_INFO_TYPE_INIT, NULL, 0, 0);
+
+ previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "INIT");
+ sos->os_status = IA64_INIT_RESUME;
+
+ /* FIXME: Workaround for broken proms that drive all INIT events as
+ * slaves. The last slave that enters is promoted to be a monarch.
+ * Remove this code in September 2006, that gives platforms a year to
+ * fix their proms and get their customers updated.
+ */
+ if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) {
+ printk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n",
+ __FUNCTION__, cpu);
+ atomic_dec(&slaves);
+ sos->monarch = 1;
+ }
+
+ /* FIXME: Workaround for broken proms that drive all INIT events as
+ * monarchs. Second and subsequent monarchs are demoted to slaves.
+ * Remove this code in September 2006, that gives platforms a year to
+ * fix their proms and get their customers updated.
+ */
+ if (sos->monarch && atomic_add_return(1, &monarchs) > 1) {
+ printk(KERN_WARNING "%s: Demoting cpu %d to slave.\n",
+ __FUNCTION__, cpu);
+ atomic_dec(&monarchs);
+ sos->monarch = 0;
+ }
+
+ if (!sos->monarch) {
+ ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT;
+ while (monarch_cpu == -1)
+ cpu_relax(); /* spin until monarch enters */
+ while (monarch_cpu != -1)
+ cpu_relax(); /* spin until monarch leaves */
+ printk("Slave on cpu %d returning to normal service.\n", cpu);
+ set_curr_task(cpu, previous_current);
+ ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
+ atomic_dec(&slaves);
+ return;
+ }
+
+ monarch_cpu = cpu;
/*
- * Address of minstate area provided by PAL is physical,
- * uncacheable (bit 63 set). Convert to Linux virtual
- * address in region 6.
+ * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be
+ * generated via the BMC's command-line interface, but since the console is on the
+ * same serial line, the user will need some time to switch out of the BMC before
+ * the dump begins.
*/
- ms = (pal_min_state_area_t *)(ia64_sal_to_os_handoff_state.pal_min_state | (6ul<<61));
-
- init_handler_platform(ms, pt, sw); /* call platform specific routines */
+ printk("Delaying for 5 seconds...\n");
+ udelay(5*1000000);
+ ia64_wait_for_slaves(cpu);
+ printk(KERN_ERR "Processes interrupted by INIT -");
+ for_each_online_cpu(c) {
+ struct ia64_sal_os_state *s;
+ t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET);
+ s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET);
+ g = s->prev_task;
+ if (g) {
+ if (g->pid)
+ printk(" %d", g->pid);
+ else
+ printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g);
+ }
+ }
+ printk("\n\n");
+ if (read_trylock(&tasklist_lock)) {
+ do_each_thread (g, t) {
+ printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm);
+ show_stack(t, NULL);
+ } while_each_thread (g, t);
+ read_unlock(&tasklist_lock);
+ }
+ printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu);
+ atomic_dec(&monarchs);
+ set_curr_task(cpu, previous_current);
+ monarch_cpu = -1;
+ return;
}
static int __init
@@ -1193,6 +1345,34 @@
};
#endif /* CONFIG_ACPI */
+/* Minimal format of the MCA/INIT stacks. The pseudo processes that run on
+ * these stacks can never sleep, they cannot return from the kernel to user
+ * space, they do not appear in a normal ps listing. So there is no need to
+ * format most of the fields.
+ */
+
+static void
+format_mca_init_stack(void *mca_data, unsigned long offset,
+ const char *type, int cpu)
+{
+ struct task_struct *p = (struct task_struct *)((char *)mca_data + offset);
+ struct thread_info *ti;
+ memset(p, 0, KERNEL_STACK_SIZE);
+ ti = (struct thread_info *)((char *)p + IA64_TASK_SIZE);
+ ti->flags = _TIF_MCA_INIT;
+ ti->preempt_count = 1;
+ ti->task = p;
+ ti->cpu = cpu;
+ p->thread_info = ti;
+ p->state = TASK_UNINTERRUPTIBLE;
+ __set_bit(cpu, &p->cpus_allowed);
+ INIT_LIST_HEAD(&p->tasks);
+ p->parent = p->real_parent = p->group_leader = p;
+ INIT_LIST_HEAD(&p->children);
+ INIT_LIST_HEAD(&p->sibling);
+ strncpy(p->comm, type, sizeof(p->comm)-1);
+}
+
/* Do per-CPU MCA-related initialization. */
void __devinit
@@ -1205,19 +1385,28 @@
int cpu;
mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu)
- * NR_CPUS);
+ * NR_CPUS + KERNEL_STACK_SIZE);
+ mca_data = (void *)(((unsigned long)mca_data +
+ KERNEL_STACK_SIZE - 1) &
+ (-KERNEL_STACK_SIZE));
for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ format_mca_init_stack(mca_data,
+ offsetof(struct ia64_mca_cpu, mca_stack),
+ "MCA", cpu);
+ format_mca_init_stack(mca_data,
+ offsetof(struct ia64_mca_cpu, init_stack),
+ "INIT", cpu);
__per_cpu_mca[cpu] = __pa(mca_data);
mca_data += sizeof(struct ia64_mca_cpu);
}
}
- /*
- * The MCA info structure was allocated earlier and its
- * physical address saved in __per_cpu_mca[cpu]. Copy that
- * address * to ia64_mca_data so we can access it as a per-CPU
- * variable.
- */
+ /*
+ * The MCA info structure was allocated earlier and its
+ * physical address saved in __per_cpu_mca[cpu]. Copy that
+ * address * to ia64_mca_data so we can access it as a per-CPU
+ * variable.
+ */
__get_cpu_var(ia64_mca_data) = __per_cpu_mca[smp_processor_id()];
/*
@@ -1227,11 +1416,11 @@
__get_cpu_var(ia64_mca_per_cpu_pte) =
pte_val(mk_pte_phys(__pa(cpu_data), PAGE_KERNEL));
- /*
- * Also, stash away a copy of the PAL address and the PTE
- * needed to map it.
- */
- pal_vaddr = efi_get_pal_addr();
+ /*
+ * Also, stash away a copy of the PAL address and the PTE
+ * needed to map it.
+ */
+ pal_vaddr = efi_get_pal_addr();
if (!pal_vaddr)
return;
__get_cpu_var(ia64_mca_pal_base) =
@@ -1263,8 +1452,8 @@
void __init
ia64_mca_init(void)
{
- ia64_fptr_t *mon_init_ptr = (ia64_fptr_t *)ia64_monarch_init_handler;
- ia64_fptr_t *slave_init_ptr = (ia64_fptr_t *)ia64_slave_init_handler;
+ ia64_fptr_t *init_hldlr_ptr_monarch = (ia64_fptr_t *)ia64_os_init_dispatch_monarch;
+ ia64_fptr_t *init_hldlr_ptr_slave = (ia64_fptr_t *)ia64_os_init_dispatch_slave;
ia64_fptr_t *mca_hldlr_ptr = (ia64_fptr_t *)ia64_os_mca_dispatch;
int i;
s64 rc;
@@ -1342,9 +1531,9 @@
* XXX - disable SAL checksum by setting size to 0, should be
* size of the actual init handler in mca_asm.S.
*/
- ia64_mc_info.imi_monarch_init_handler = ia64_tpa(mon_init_ptr->fp);
+ ia64_mc_info.imi_monarch_init_handler = ia64_tpa(init_hldlr_ptr_monarch->fp);
ia64_mc_info.imi_monarch_init_handler_size = 0;
- ia64_mc_info.imi_slave_init_handler = ia64_tpa(slave_init_ptr->fp);
+ ia64_mc_info.imi_slave_init_handler = ia64_tpa(init_hldlr_ptr_slave->fp);
ia64_mc_info.imi_slave_init_handler_size = 0;
IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __FUNCTION__,
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index ef3fd72..499a065 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -16,6 +16,9 @@
// 04/11/12 Russ Anderson <rja@sgi.com>
// Added per cpu MCA/INIT stack save areas.
//
+// 12/08/05 Keith Owens <kaos@sgi.com>
+// Use per cpu MCA/INIT stacks for all data.
+//
#include <linux/config.h>
#include <linux/threads.h>
@@ -25,96 +28,23 @@
#include <asm/mca_asm.h>
#include <asm/mca.h>
-/*
- * When we get a machine check, the kernel stack pointer is no longer
- * valid, so we need to set a new stack pointer.
- */
-#define MINSTATE_PHYS /* Make sure stack access is physical for MINSTATE */
-
-/*
- * Needed for return context to SAL
- */
-#define IA64_MCA_SAME_CONTEXT 0
-#define IA64_MCA_COLD_BOOT -2
-
-#include "minstate.h"
-
-/*
- * SAL_TO_OS_MCA_HANDOFF_STATE (SAL 3.0 spec)
- * 1. GR1 = OS GP
- * 2. GR8 = PAL_PROC physical address
- * 3. GR9 = SAL_PROC physical address
- * 4. GR10 = SAL GP (physical)
- * 5. GR11 = Rendez state
- * 6. GR12 = Return address to location within SAL_CHECK
- */
-#define SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(_tmp) \
- LOAD_PHYSICAL(p0, _tmp, ia64_sal_to_os_handoff_state);; \
- st8 [_tmp]=r1,0x08;; \
- st8 [_tmp]=r8,0x08;; \
- st8 [_tmp]=r9,0x08;; \
- st8 [_tmp]=r10,0x08;; \
- st8 [_tmp]=r11,0x08;; \
- st8 [_tmp]=r12,0x08;; \
- st8 [_tmp]=r17,0x08;; \
- st8 [_tmp]=r18,0x08
-
-/*
- * OS_MCA_TO_SAL_HANDOFF_STATE (SAL 3.0 spec)
- * (p6) is executed if we never entered virtual mode (TLB error)
- * (p7) is executed if we entered virtual mode as expected (normal case)
- * 1. GR8 = OS_MCA return status
- * 2. GR9 = SAL GP (physical)
- * 3. GR10 = 0/1 returning same/new context
- * 4. GR22 = New min state save area pointer
- * returns ptr to SAL rtn save loc in _tmp
- */
-#define OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(_tmp) \
- movl _tmp=ia64_os_to_sal_handoff_state;; \
- DATA_VA_TO_PA(_tmp);; \
- ld8 r8=[_tmp],0x08;; \
- ld8 r9=[_tmp],0x08;; \
- ld8 r10=[_tmp],0x08;; \
- ld8 r22=[_tmp],0x08;;
- // now _tmp is pointing to SAL rtn save location
-
-/*
- * COLD_BOOT_HANDOFF_STATE() sets ia64_mca_os_to_sal_state
- * imots_os_status=IA64_MCA_COLD_BOOT
- * imots_sal_gp=SAL GP
- * imots_context=IA64_MCA_SAME_CONTEXT
- * imots_new_min_state=Min state save area pointer
- * imots_sal_check_ra=Return address to location within SAL_CHECK
- *
- */
-#define COLD_BOOT_HANDOFF_STATE(sal_to_os_handoff,os_to_sal_handoff,tmp)\
- movl tmp=IA64_MCA_COLD_BOOT; \
- movl sal_to_os_handoff=__pa(ia64_sal_to_os_handoff_state); \
- movl os_to_sal_handoff=__pa(ia64_os_to_sal_handoff_state);; \
- st8 [os_to_sal_handoff]=tmp,8;; \
- ld8 tmp=[sal_to_os_handoff],48;; \
- st8 [os_to_sal_handoff]=tmp,8;; \
- movl tmp=IA64_MCA_SAME_CONTEXT;; \
- st8 [os_to_sal_handoff]=tmp,8;; \
- ld8 tmp=[sal_to_os_handoff],-8;; \
- st8 [os_to_sal_handoff]=tmp,8;; \
- ld8 tmp=[sal_to_os_handoff];; \
- st8 [os_to_sal_handoff]=tmp;;
+#include "entry.h"
#define GET_IA64_MCA_DATA(reg) \
GET_THIS_PADDR(reg, ia64_mca_data) \
;; \
ld8 reg=[reg]
- .global ia64_os_mca_dispatch
- .global ia64_os_mca_dispatch_end
- .global ia64_sal_to_os_handoff_state
- .global ia64_os_to_sal_handoff_state
.global ia64_do_tlb_purge
+ .global ia64_os_mca_dispatch
+ .global ia64_os_init_dispatch_monarch
+ .global ia64_os_init_dispatch_slave
.text
.align 16
+//StartMain////////////////////////////////////////////////////////////////////
+
/*
* Just the TLB purge part is moved to a separate function
* so we can re-use the code for cpu hotplug code as well
@@ -207,34 +137,31 @@
br.sptk.many b1
;;
-ia64_os_mca_dispatch:
+//EndMain//////////////////////////////////////////////////////////////////////
+//StartMain////////////////////////////////////////////////////////////////////
+
+ia64_os_mca_dispatch:
// Serialize all MCA processing
mov r3=1;;
LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);;
ia64_os_mca_spin:
- xchg8 r4=[r2],r3;;
+ xchg4 r4=[r2],r3;;
cmp.ne p6,p0=r4,r0
(p6) br ia64_os_mca_spin
- // Save the SAL to OS MCA handoff state as defined
- // by SAL SPEC 3.0
- // NOTE : The order in which the state gets saved
- // is dependent on the way the C-structure
- // for ia64_mca_sal_to_os_state_t has been
- // defined in include/asm/mca.h
- SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2)
+ mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ mov r19=1 // All MCA events are treated as monarch (for now)
+ br.sptk ia64_state_save // save the state that is not in minstate
+1:
+
+ GET_IA64_MCA_DATA(r2)
+ // Using MCA stack, struct ia64_sal_os_state, variable proc_state_param
;;
-
- // LOG PROCESSOR STATE INFO FROM HERE ON..
-begin_os_mca_dump:
- br ia64_os_mca_proc_state_dump;;
-
-ia64_os_mca_done_dump:
-
- LOAD_PHYSICAL(p0,r16,ia64_sal_to_os_handoff_state+56)
+ add r3=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PROC_STATE_PARAM_OFFSET, r2
;;
- ld8 r18=[r16] // Get processor state parameter on existing PALE_CHECK.
+ ld8 r18=[r3] // Get processor state parameter on existing PALE_CHECK.
;;
tbit.nz p6,p7=r18,60
(p7) br.spnt done_tlb_purge_and_reload
@@ -323,624 +250,775 @@
itr.d dtr[r20]=r16
;;
srlz.d
- ;;
- br.sptk.many done_tlb_purge_and_reload
-err:
- COLD_BOOT_HANDOFF_STATE(r20,r21,r22)
- br.sptk.many ia64_os_mca_done_restore
done_tlb_purge_and_reload:
- // Setup new stack frame for OS_MCA handling
- GET_IA64_MCA_DATA(r2)
- ;;
- add r3 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2
- add r2 = IA64_MCA_CPU_RBSTORE_OFFSET, r2
- ;;
- rse_switch_context(r6,r3,r2);; // RSC management in this new context
+ // switch to per cpu MCA stack
+ mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_new_stack
+1:
+ // everything saved, now we can set the kernel registers
+ mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_set_kernel_registers
+1:
+
+ // This must be done in physical mode
GET_IA64_MCA_DATA(r2)
;;
- add r2 = IA64_MCA_CPU_STACK_OFFSET+IA64_MCA_STACK_SIZE-16, r2
- ;;
- mov r12=r2 // establish new stack-pointer
+ mov r7=r2
// Enter virtual mode from physical mode
VIRTUAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_begin, r4)
-ia64_os_mca_virtual_begin:
+
+ // This code returns to SAL via SOS r2, in general SAL has no unwind
+ // data. To get a clean termination when backtracing the C MCA/INIT
+ // handler, set a dummy return address of 0 in this routine. That
+ // requires that ia64_os_mca_virtual_begin be a global function.
+ENTRY(ia64_os_mca_virtual_begin)
+ .prologue
+ .save rp,r0
+ .body
+
+ mov ar.rsc=3 // set eager mode for C handler
+ mov r2=r7 // see GET_IA64_MCA_DATA above
+ ;;
// Call virtual mode handler
- movl r2=ia64_mca_ucmc_handler;;
- mov b6=r2;;
- br.call.sptk.many b0=b6;;
-.ret0:
+ alloc r14=ar.pfs,0,0,3,0
+ ;;
+ DATA_PA_TO_VA(r2,r7)
+ ;;
+ add out0=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2
+ add out1=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2
+ add out2=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET, r2
+ br.call.sptk.many b0=ia64_mca_handler
+
// Revert back to physical mode before going back to SAL
PHYSICAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_end, r4)
ia64_os_mca_virtual_end:
- // restore the original stack frame here
- GET_IA64_MCA_DATA(r2)
- ;;
- add r2 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2
- ;;
- movl r4=IA64_PSR_MC
- ;;
- rse_return_context(r4,r3,r2) // switch from interrupt context for RSE
+END(ia64_os_mca_virtual_begin)
- // let us restore all the registers from our PSI structure
- mov r8=gp
- ;;
-begin_os_mca_restore:
- br ia64_os_mca_proc_state_restore;;
+ // switch back to previous stack
+ alloc r14=ar.pfs,0,0,0,0 // remove the MCA handler frame
+ mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_old_stack
+1:
-ia64_os_mca_done_restore:
- OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(r2);;
- // branch back to SALE_CHECK
- ld8 r3=[r2];;
- mov b0=r3;; // SAL_CHECK return address
+ mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_state_restore // restore the SAL state
+1:
+
+ mov b0=r12 // SAL_CHECK return address
// release lock
- movl r3=ia64_mca_serialize;;
- DATA_VA_TO_PA(r3);;
- st8.rel [r3]=r0
+ LOAD_PHYSICAL(p0,r3,ia64_mca_serialize);;
+ st4.rel [r3]=r0
br b0
- ;;
-ia64_os_mca_dispatch_end:
+
//EndMain//////////////////////////////////////////////////////////////////////
+//StartMain////////////////////////////////////////////////////////////////////
-//++
-// Name:
-// ia64_os_mca_proc_state_dump()
//
-// Stub Description:
+// SAL to OS entry point for INIT on all processors. This has been defined for
+// registration purposes with SAL as a part of ia64_mca_init. Monarch and
+// slave INIT have identical processing, except for the value of the
+// sos->monarch flag in r19.
//
-// This stub dumps the processor state during MCHK to a data area
-//
-//--
-ia64_os_mca_proc_state_dump:
-// Save bank 1 GRs 16-31 which will be used by c-language code when we switch
-// to virtual addressing mode.
+ia64_os_init_dispatch_monarch:
+ mov r19=1 // Bow, bow, ye lower middle classes!
+ br.sptk ia64_os_init_dispatch
+
+ia64_os_init_dispatch_slave:
+ mov r19=0 // <igor>yeth, mathter</igor>
+
+ia64_os_init_dispatch:
+
+ mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_state_save // save the state that is not in minstate
+1:
+
+ // switch to per cpu INIT stack
+ mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_new_stack
+1:
+
+ // everything saved, now we can set the kernel registers
+ mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_set_kernel_registers
+1:
+
+ // This must be done in physical mode
GET_IA64_MCA_DATA(r2)
;;
- add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2
- ;;
-// save ar.NaT
- mov r5=ar.unat // ar.unat
+ mov r7=r2
-// save banked GRs 16-31 along with NaT bits
- bsw.1;;
- st8.spill [r2]=r16,8;;
- st8.spill [r2]=r17,8;;
- st8.spill [r2]=r18,8;;
- st8.spill [r2]=r19,8;;
- st8.spill [r2]=r20,8;;
- st8.spill [r2]=r21,8;;
- st8.spill [r2]=r22,8;;
- st8.spill [r2]=r23,8;;
- st8.spill [r2]=r24,8;;
- st8.spill [r2]=r25,8;;
- st8.spill [r2]=r26,8;;
- st8.spill [r2]=r27,8;;
- st8.spill [r2]=r28,8;;
- st8.spill [r2]=r29,8;;
- st8.spill [r2]=r30,8;;
- st8.spill [r2]=r31,8;;
+ // Enter virtual mode from physical mode
+ VIRTUAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_begin, r4)
- mov r4=ar.unat;;
- st8 [r2]=r4,8 // save User NaT bits for r16-r31
- mov ar.unat=r5 // restore original unat
- bsw.0;;
-
-//save BRs
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2 // duplicate r2 in r4
-
- mov r3=b0
- mov r5=b1
- mov r7=b2;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=b3
- mov r5=b4
- mov r7=b5;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=b6
- mov r5=b7;;
- st8 [r2]=r3,2*8
- st8 [r4]=r5,2*8;;
-
-cSaveCRs:
-// save CRs
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2 // duplicate r2 in r4
-
- mov r3=cr.dcr
- mov r5=cr.itm
- mov r7=cr.iva;;
-
- st8 [r2]=r3,8*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;; // 48 byte rements
-
- mov r3=cr.pta;;
- st8 [r2]=r3,8*8;; // 64 byte rements
-
-// if PSR.ic=0, reading interruption registers causes an illegal operation fault
- mov r3=psr;;
- tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test
-(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc.
-begin_skip_intr_regs:
-(p6) br SkipIntrRegs;;
-
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2 // duplicate r2 in r6
-
- mov r3=cr.ipsr
- mov r5=cr.isr
- mov r7=r0;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=cr.iip
- mov r5=cr.ifa
- mov r7=cr.itir;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=cr.iipa
- mov r5=cr.ifs
- mov r7=cr.iim;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=cr25;; // cr.iha
- st8 [r2]=r3,160;; // 160 byte rement
-
-SkipIntrRegs:
- st8 [r2]=r0,152;; // another 152 byte .
-
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2 // duplicate r2 in r6
-
- mov r3=cr.lid
-// mov r5=cr.ivr // cr.ivr, don't read it
- mov r7=cr.tpr;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=r0 // cr.eoi => cr67
- mov r5=r0 // cr.irr0 => cr68
- mov r7=r0;; // cr.irr1 => cr69
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=r0 // cr.irr2 => cr70
- mov r5=r0 // cr.irr3 => cr71
- mov r7=cr.itv;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=cr.pmv
- mov r5=cr.cmcv;;
- st8 [r2]=r3,7*8
- st8 [r4]=r5,7*8;;
-
- mov r3=r0 // cr.lrr0 => cr80
- mov r5=r0;; // cr.lrr1 => cr81
- st8 [r2]=r3,23*8
- st8 [r4]=r5,23*8;;
-
- adds r2=25*8,r2;;
-
-cSaveARs:
-// save ARs
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2 // duplicate r2 in r6
-
- mov r3=ar.k0
- mov r5=ar.k1
- mov r7=ar.k2;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=ar.k3
- mov r5=ar.k4
- mov r7=ar.k5;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=ar.k6
- mov r5=ar.k7
- mov r7=r0;; // ar.kr8
- st8 [r2]=r3,10*8
- st8 [r4]=r5,10*8
- st8 [r6]=r7,10*8;; // rement by 72 bytes
-
- mov r3=ar.rsc
- mov ar.rsc=r0 // put RSE in enforced lazy mode
- mov r5=ar.bsp
- ;;
- mov r7=ar.bspstore;;
- st8 [r2]=r3,3*8
- st8 [r4]=r5,3*8
- st8 [r6]=r7,3*8;;
-
- mov r3=ar.rnat;;
- st8 [r2]=r3,8*13 // increment by 13x8 bytes
-
- mov r3=ar.ccv;;
- st8 [r2]=r3,8*4
-
- mov r3=ar.unat;;
- st8 [r2]=r3,8*4
-
- mov r3=ar.fpsr;;
- st8 [r2]=r3,8*4
-
- mov r3=ar.itc;;
- st8 [r2]=r3,160 // 160
-
- mov r3=ar.pfs;;
- st8 [r2]=r3,8
-
- mov r3=ar.lc;;
- st8 [r2]=r3,8
-
- mov r3=ar.ec;;
- st8 [r2]=r3
- add r2=8*62,r2 //padding
-
-// save RRs
- mov ar.lc=0x08-1
- movl r4=0x00;;
-
-cStRR:
- dep.z r5=r4,61,3;;
- mov r3=rr[r5];;
- st8 [r2]=r3,8
- add r4=1,r4
- br.cloop.sptk.few cStRR
- ;;
-end_os_mca_dump:
- br ia64_os_mca_done_dump;;
-
-//EndStub//////////////////////////////////////////////////////////////////////
-
-
-//++
-// Name:
-// ia64_os_mca_proc_state_restore()
-//
-// Stub Description:
-//
-// This is a stub to restore the saved processor state during MCHK
-//
-//--
-
-ia64_os_mca_proc_state_restore:
-
-// Restore bank1 GR16-31
- GET_IA64_MCA_DATA(r2)
- ;;
- add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2
-
-restore_GRs: // restore bank-1 GRs 16-31
- bsw.1;;
- add r3=16*8,r2;; // to get to NaT of GR 16-31
- ld8 r3=[r3];;
- mov ar.unat=r3;; // first restore NaT
-
- ld8.fill r16=[r2],8;;
- ld8.fill r17=[r2],8;;
- ld8.fill r18=[r2],8;;
- ld8.fill r19=[r2],8;;
- ld8.fill r20=[r2],8;;
- ld8.fill r21=[r2],8;;
- ld8.fill r22=[r2],8;;
- ld8.fill r23=[r2],8;;
- ld8.fill r24=[r2],8;;
- ld8.fill r25=[r2],8;;
- ld8.fill r26=[r2],8;;
- ld8.fill r27=[r2],8;;
- ld8.fill r28=[r2],8;;
- ld8.fill r29=[r2],8;;
- ld8.fill r30=[r2],8;;
- ld8.fill r31=[r2],8;;
-
- ld8 r3=[r2],8;; // increment to skip NaT
- bsw.0;;
-
-restore_BRs:
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2;; // duplicate r2 in r4
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
- mov b0=r3
- mov b1=r5
- mov b2=r7;;
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
- mov b3=r3
- mov b4=r5
- mov b5=r7;;
-
- ld8 r3=[r2],2*8
- ld8 r5=[r4],2*8;;
- mov b6=r3
- mov b7=r5;;
-
-restore_CRs:
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2;; // duplicate r2 in r4
-
- ld8 r3=[r2],8*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;; // 48 byte increments
- mov cr.dcr=r3
- mov cr.itm=r5
- mov cr.iva=r7;;
-
- ld8 r3=[r2],8*8;; // 64 byte increments
-// mov cr.pta=r3
-
-
-// if PSR.ic=1, reading interruption registers causes an illegal operation fault
- mov r3=psr;;
- tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test
-(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc.
-
-begin_rskip_intr_regs:
-(p6) br rSkipIntrRegs;;
-
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2;; // duplicate r2 in r4
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
- mov cr.ipsr=r3
-// mov cr.isr=r5 // cr.isr is read only
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
- mov cr.iip=r3
- mov cr.ifa=r5
- mov cr.itir=r7;;
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
- mov cr.iipa=r3
- mov cr.ifs=r5
- mov cr.iim=r7
-
- ld8 r3=[r2],160;; // 160 byte increment
- mov cr.iha=r3
-
-rSkipIntrRegs:
- ld8 r3=[r2],152;; // another 152 byte inc.
-
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2;; // duplicate r2 in r6
-
- ld8 r3=[r2],8*3
- ld8 r5=[r4],8*3
- ld8 r7=[r6],8*3;;
- mov cr.lid=r3
-// mov cr.ivr=r5 // cr.ivr is read only
- mov cr.tpr=r7;;
-
- ld8 r3=[r2],8*3
- ld8 r5=[r4],8*3
- ld8 r7=[r6],8*3;;
-// mov cr.eoi=r3
-// mov cr.irr0=r5 // cr.irr0 is read only
-// mov cr.irr1=r7;; // cr.irr1 is read only
-
- ld8 r3=[r2],8*3
- ld8 r5=[r4],8*3
- ld8 r7=[r6],8*3;;
-// mov cr.irr2=r3 // cr.irr2 is read only
-// mov cr.irr3=r5 // cr.irr3 is read only
- mov cr.itv=r7;;
-
- ld8 r3=[r2],8*7
- ld8 r5=[r4],8*7;;
- mov cr.pmv=r3
- mov cr.cmcv=r5;;
-
- ld8 r3=[r2],8*23
- ld8 r5=[r4],8*23;;
- adds r2=8*23,r2
- adds r4=8*23,r4;;
-// mov cr.lrr0=r3
-// mov cr.lrr1=r5
-
- adds r2=8*2,r2;;
-
-restore_ARs:
- add r4=8,r2 // duplicate r2 in r4
- add r6=2*8,r2;; // duplicate r2 in r4
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
- mov ar.k0=r3
- mov ar.k1=r5
- mov ar.k2=r7;;
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
- mov ar.k3=r3
- mov ar.k4=r5
- mov ar.k5=r7;;
-
- ld8 r3=[r2],10*8
- ld8 r5=[r4],10*8
- ld8 r7=[r6],10*8;;
- mov ar.k6=r3
- mov ar.k7=r5
- ;;
-
- ld8 r3=[r2],3*8
- ld8 r5=[r4],3*8
- ld8 r7=[r6],3*8;;
-// mov ar.rsc=r3
-// mov ar.bsp=r5 // ar.bsp is read only
- mov ar.rsc=r0 // make sure that RSE is in enforced lazy mode
- ;;
- mov ar.bspstore=r7;;
-
- ld8 r9=[r2],8*13;;
- mov ar.rnat=r9
-
- mov ar.rsc=r3
- ld8 r3=[r2],8*4;;
- mov ar.ccv=r3
-
- ld8 r3=[r2],8*4;;
- mov ar.unat=r3
-
- ld8 r3=[r2],8*4;;
- mov ar.fpsr=r3
-
- ld8 r3=[r2],160;; // 160
-// mov ar.itc=r3
-
- ld8 r3=[r2],8;;
- mov ar.pfs=r3
-
- ld8 r3=[r2],8;;
- mov ar.lc=r3
-
- ld8 r3=[r2];;
- mov ar.ec=r3
- add r2=8*62,r2;; // padding
-
-restore_RRs:
- mov r5=ar.lc
- mov ar.lc=0x08-1
- movl r4=0x00;;
-cStRRr:
- dep.z r7=r4,61,3
- ld8 r3=[r2],8;;
- mov rr[r7]=r3 // what are its access previledges?
- add r4=1,r4
- br.cloop.sptk.few cStRRr
- ;;
- mov ar.lc=r5
- ;;
-end_os_mca_restore:
- br ia64_os_mca_done_restore;;
-
-//EndStub//////////////////////////////////////////////////////////////////////
-
-
-// ok, the issue here is that we need to save state information so
-// it can be useable by the kernel debugger and show regs routines.
-// In order to do this, our best bet is save the current state (plus
-// the state information obtain from the MIN_STATE_AREA) into a pt_regs
-// format. This way we can pass it on in a useable format.
-//
-
-//
-// SAL to OS entry point for INIT on the monarch processor
-// This has been defined for registration purposes with SAL
-// as a part of ia64_mca_init.
-//
-// When we get here, the following registers have been
-// set by the SAL for our use
-//
-// 1. GR1 = OS INIT GP
-// 2. GR8 = PAL_PROC physical address
-// 3. GR9 = SAL_PROC physical address
-// 4. GR10 = SAL GP (physical)
-// 5. GR11 = Init Reason
-// 0 = Received INIT for event other than crash dump switch
-// 1 = Received wakeup at the end of an OS_MCA corrected machine check
-// 2 = Received INIT dude to CrashDump switch assertion
-//
-// 6. GR12 = Return address to location within SAL_INIT procedure
-
-
-GLOBAL_ENTRY(ia64_monarch_init_handler)
+ // This code returns to SAL via SOS r2, in general SAL has no unwind
+ // data. To get a clean termination when backtracing the C MCA/INIT
+ // handler, set a dummy return address of 0 in this routine. That
+ // requires that ia64_os_init_virtual_begin be a global function.
+ENTRY(ia64_os_init_virtual_begin)
.prologue
- // stash the information the SAL passed to os
- SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2)
- ;;
- SAVE_MIN_WITH_COVER
- ;;
- mov r8=cr.ifa
- mov r9=cr.isr
- adds r3=8,r2 // set up second base pointer
- ;;
- SAVE_REST
-
-// ok, enough should be saved at this point to be dangerous, and supply
-// information for a dump
-// We need to switch to Virtual mode before hitting the C functions.
-
- movl r2=IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN
- mov r3=psr // get the current psr, minimum enabled at this point
- ;;
- or r2=r2,r3
- ;;
- movl r3=IVirtual_Switch
- ;;
- mov cr.iip=r3 // short return to set the appropriate bits
- mov cr.ipsr=r2 // need to do an rfi to set appropriate bits
- ;;
- rfi
- ;;
-IVirtual_Switch:
- //
- // We should now be running virtual
- //
- // Let's call the C handler to get the rest of the state info
- //
- alloc r14=ar.pfs,0,0,2,0 // now it's safe (must be first in insn group!)
- ;;
- adds out0=16,sp // out0 = pointer to pt_regs
- ;;
- DO_SAVE_SWITCH_STACK
+ .save rp,r0
.body
- adds out1=16,sp // out0 = pointer to switch_stack
- br.call.sptk.many rp=ia64_init_handler
-.ret1:
+ mov ar.rsc=3 // set eager mode for C handler
+ mov r2=r7 // see GET_IA64_MCA_DATA above
+ ;;
-return_from_init:
- br.sptk return_from_init
-END(ia64_monarch_init_handler)
+ // Call virtual mode handler
+ alloc r14=ar.pfs,0,0,3,0
+ ;;
+ DATA_PA_TO_VA(r2,r7)
+ ;;
+ add out0=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2
+ add out1=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2
+ add out2=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SOS_OFFSET, r2
+ br.call.sptk.many b0=ia64_init_handler
+ // Revert back to physical mode before going back to SAL
+ PHYSICAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_end, r4)
+ia64_os_init_virtual_end:
+
+END(ia64_os_init_virtual_begin)
+
+ mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_state_restore // restore the SAL state
+1:
+
+ // switch back to previous stack
+ alloc r14=ar.pfs,0,0,0,0 // remove the INIT handler frame
+ mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack
+ LOAD_PHYSICAL(p0,r2,1f) // return address
+ br.sptk ia64_old_stack
+1:
+
+ mov b0=r12 // SAL_CHECK return address
+ br b0
+
+//EndMain//////////////////////////////////////////////////////////////////////
+
+// common defines for the stubs
+#define ms r4
+#define regs r5
+#define temp1 r2 /* careful, it overlaps with input registers */
+#define temp2 r3 /* careful, it overlaps with input registers */
+#define temp3 r7
+#define temp4 r14
+
+
+//++
+// Name:
+// ia64_state_save()
//
-// SAL to OS entry point for INIT on the slave processor
-// This has been defined for registration purposes with SAL
-// as a part of ia64_mca_init.
+// Stub Description:
//
+// Save the state that is not in minstate. This is sensitive to the layout of
+// struct ia64_sal_os_state in mca.h.
+//
+// r2 contains the return address, r3 contains either
+// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET.
+//
+// The OS to SAL section of struct ia64_sal_os_state is set to a default
+// value of cold boot (MCA) or warm boot (INIT) and return to the same
+// context. ia64_sal_os_state is also used to hold some registers that
+// need to be saved and restored across the stack switches.
+//
+// Most input registers to this stub come from PAL/SAL
+// r1 os gp, physical
+// r8 pal_proc entry point
+// r9 sal_proc entry point
+// r10 sal gp
+// r11 MCA - rendevzous state, INIT - reason code
+// r12 sal return address
+// r17 pal min_state
+// r18 processor state parameter
+// r19 monarch flag, set by the caller of this routine
+//
+// In addition to the SAL to OS state, this routine saves all the
+// registers that appear in struct pt_regs and struct switch_stack,
+// excluding those that are already in the PAL minstate area. This
+// results in a partial pt_regs and switch_stack, the C code copies the
+// remaining registers from PAL minstate to pt_regs and switch_stack. The
+// resulting structures contain all the state of the original process when
+// MCA/INIT occurred.
+//
+//--
-GLOBAL_ENTRY(ia64_slave_init_handler)
-1: br.sptk 1b
-END(ia64_slave_init_handler)
+ia64_state_save:
+ add regs=MCA_SOS_OFFSET, r3
+ add ms=MCA_SOS_OFFSET+8, r3
+ mov b0=r2 // save return address
+ cmp.eq p1,p2=IA64_MCA_CPU_MCA_STACK_OFFSET, r3
+ ;;
+ GET_IA64_MCA_DATA(temp2)
+ ;;
+ add temp1=temp2, regs // struct ia64_sal_os_state on MCA or INIT stack
+ add temp2=temp2, ms // struct ia64_sal_os_state+8 on MCA or INIT stack
+ ;;
+ mov regs=temp1 // save the start of sos
+ st8 [temp1]=r1,16 // os_gp
+ st8 [temp2]=r8,16 // pal_proc
+ ;;
+ st8 [temp1]=r9,16 // sal_proc
+ st8 [temp2]=r11,16 // rv_rc
+ mov r11=cr.iipa
+ ;;
+ st8 [temp1]=r18,16 // proc_state_param
+ st8 [temp2]=r19,16 // monarch
+ mov r6=IA64_KR(CURRENT)
+ ;;
+ st8 [temp1]=r12,16 // sal_ra
+ st8 [temp2]=r10,16 // sal_gp
+ mov r12=cr.isr
+ ;;
+ st8 [temp1]=r17,16 // pal_min_state
+ st8 [temp2]=r6,16 // prev_IA64_KR_CURRENT
+ mov r6=cr.ifa
+ ;;
+ st8 [temp1]=r0,16 // prev_task, starts off as NULL
+ st8 [temp2]=r12,16 // cr.isr
+ mov r12=cr.itir
+ ;;
+ st8 [temp1]=r6,16 // cr.ifa
+ st8 [temp2]=r12,16 // cr.itir
+ mov r12=cr.iim
+ ;;
+ st8 [temp1]=r11,16 // cr.iipa
+ st8 [temp2]=r12,16 // cr.iim
+ mov r6=cr.iha
+(p1) mov r12=IA64_MCA_COLD_BOOT
+(p2) mov r12=IA64_INIT_WARM_BOOT
+ ;;
+ st8 [temp1]=r6,16 // cr.iha
+ st8 [temp2]=r12 // os_status, default is cold boot
+ mov r6=IA64_MCA_SAME_CONTEXT
+ ;;
+ st8 [temp1]=r6 // context, default is same context
+
+ // Save the pt_regs data that is not in minstate. The previous code
+ // left regs at sos.
+ add regs=MCA_PT_REGS_OFFSET-MCA_SOS_OFFSET, regs
+ ;;
+ add temp1=PT(B6), regs
+ mov temp3=b6
+ mov temp4=b7
+ add temp2=PT(B7), regs
+ ;;
+ st8 [temp1]=temp3,PT(AR_CSD)-PT(B6) // save b6
+ st8 [temp2]=temp4,PT(AR_SSD)-PT(B7) // save b7
+ mov temp3=ar.csd
+ mov temp4=ar.ssd
+ cover // must be last in group
+ ;;
+ st8 [temp1]=temp3,PT(AR_UNAT)-PT(AR_CSD) // save ar.csd
+ st8 [temp2]=temp4,PT(AR_PFS)-PT(AR_SSD) // save ar.ssd
+ mov temp3=ar.unat
+ mov temp4=ar.pfs
+ ;;
+ st8 [temp1]=temp3,PT(AR_RNAT)-PT(AR_UNAT) // save ar.unat
+ st8 [temp2]=temp4,PT(AR_BSPSTORE)-PT(AR_PFS) // save ar.pfs
+ mov temp3=ar.rnat
+ mov temp4=ar.bspstore
+ ;;
+ st8 [temp1]=temp3,PT(LOADRS)-PT(AR_RNAT) // save ar.rnat
+ st8 [temp2]=temp4,PT(AR_FPSR)-PT(AR_BSPSTORE) // save ar.bspstore
+ mov temp3=ar.bsp
+ ;;
+ sub temp3=temp3, temp4 // ar.bsp - ar.bspstore
+ mov temp4=ar.fpsr
+ ;;
+ shl temp3=temp3,16 // compute ar.rsc to be used for "loadrs"
+ ;;
+ st8 [temp1]=temp3,PT(AR_CCV)-PT(LOADRS) // save loadrs
+ st8 [temp2]=temp4,PT(F6)-PT(AR_FPSR) // save ar.fpsr
+ mov temp3=ar.ccv
+ ;;
+ st8 [temp1]=temp3,PT(F7)-PT(AR_CCV) // save ar.ccv
+ stf.spill [temp2]=f6,PT(F8)-PT(F6)
+ ;;
+ stf.spill [temp1]=f7,PT(F9)-PT(F7)
+ stf.spill [temp2]=f8,PT(F10)-PT(F8)
+ ;;
+ stf.spill [temp1]=f9,PT(F11)-PT(F9)
+ stf.spill [temp2]=f10
+ ;;
+ stf.spill [temp1]=f11
+
+ // Save the switch_stack data that is not in minstate nor pt_regs. The
+ // previous code left regs at pt_regs.
+ add regs=MCA_SWITCH_STACK_OFFSET-MCA_PT_REGS_OFFSET, regs
+ ;;
+ add temp1=SW(F2), regs
+ add temp2=SW(F3), regs
+ ;;
+ stf.spill [temp1]=f2,32
+ stf.spill [temp2]=f3,32
+ ;;
+ stf.spill [temp1]=f4,32
+ stf.spill [temp2]=f5,32
+ ;;
+ stf.spill [temp1]=f12,32
+ stf.spill [temp2]=f13,32
+ ;;
+ stf.spill [temp1]=f14,32
+ stf.spill [temp2]=f15,32
+ ;;
+ stf.spill [temp1]=f16,32
+ stf.spill [temp2]=f17,32
+ ;;
+ stf.spill [temp1]=f18,32
+ stf.spill [temp2]=f19,32
+ ;;
+ stf.spill [temp1]=f20,32
+ stf.spill [temp2]=f21,32
+ ;;
+ stf.spill [temp1]=f22,32
+ stf.spill [temp2]=f23,32
+ ;;
+ stf.spill [temp1]=f24,32
+ stf.spill [temp2]=f25,32
+ ;;
+ stf.spill [temp1]=f26,32
+ stf.spill [temp2]=f27,32
+ ;;
+ stf.spill [temp1]=f28,32
+ stf.spill [temp2]=f29,32
+ ;;
+ stf.spill [temp1]=f30,SW(B2)-SW(F30)
+ stf.spill [temp2]=f31,SW(B3)-SW(F31)
+ mov temp3=b2
+ mov temp4=b3
+ ;;
+ st8 [temp1]=temp3,16 // save b2
+ st8 [temp2]=temp4,16 // save b3
+ mov temp3=b4
+ mov temp4=b5
+ ;;
+ st8 [temp1]=temp3,SW(AR_LC)-SW(B4) // save b4
+ st8 [temp2]=temp4 // save b5
+ mov temp3=ar.lc
+ ;;
+ st8 [temp1]=temp3 // save ar.lc
+
+ // FIXME: Some proms are incorrectly accessing the minstate area as
+ // cached data. The C code uses region 6, uncached virtual. Ensure
+ // that there is no cache data lying around for the first 1K of the
+ // minstate area.
+ // Remove this code in September 2006, that gives platforms a year to
+ // fix their proms and get their customers updated.
+
+ add r1=32*1,r17
+ add r2=32*2,r17
+ add r3=32*3,r17
+ add r4=32*4,r17
+ add r5=32*5,r17
+ add r6=32*6,r17
+ add r7=32*7,r17
+ ;;
+ fc r17
+ fc r1
+ fc r2
+ fc r3
+ fc r4
+ fc r5
+ fc r6
+ fc r7
+ add r17=32*8,r17
+ add r1=32*8,r1
+ add r2=32*8,r2
+ add r3=32*8,r3
+ add r4=32*8,r4
+ add r5=32*8,r5
+ add r6=32*8,r6
+ add r7=32*8,r7
+ ;;
+ fc r17
+ fc r1
+ fc r2
+ fc r3
+ fc r4
+ fc r5
+ fc r6
+ fc r7
+ add r17=32*8,r17
+ add r1=32*8,r1
+ add r2=32*8,r2
+ add r3=32*8,r3
+ add r4=32*8,r4
+ add r5=32*8,r5
+ add r6=32*8,r6
+ add r7=32*8,r7
+ ;;
+ fc r17
+ fc r1
+ fc r2
+ fc r3
+ fc r4
+ fc r5
+ fc r6
+ fc r7
+ add r17=32*8,r17
+ add r1=32*8,r1
+ add r2=32*8,r2
+ add r3=32*8,r3
+ add r4=32*8,r4
+ add r5=32*8,r5
+ add r6=32*8,r6
+ add r7=32*8,r7
+ ;;
+ fc r17
+ fc r1
+ fc r2
+ fc r3
+ fc r4
+ fc r5
+ fc r6
+ fc r7
+
+ br.sptk b0
+
+//EndStub//////////////////////////////////////////////////////////////////////
+
+
+//++
+// Name:
+// ia64_state_restore()
+//
+// Stub Description:
+//
+// Restore the SAL/OS state. This is sensitive to the layout of struct
+// ia64_sal_os_state in mca.h.
+//
+// r2 contains the return address, r3 contains either
+// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET.
+//
+// In addition to the SAL to OS state, this routine restores all the
+// registers that appear in struct pt_regs and struct switch_stack,
+// excluding those in the PAL minstate area.
+//
+//--
+
+ia64_state_restore:
+ // Restore the switch_stack data that is not in minstate nor pt_regs.
+ add regs=MCA_SWITCH_STACK_OFFSET, r3
+ mov b0=r2 // save return address
+ ;;
+ GET_IA64_MCA_DATA(temp2)
+ ;;
+ add regs=temp2, regs
+ ;;
+ add temp1=SW(F2), regs
+ add temp2=SW(F3), regs
+ ;;
+ ldf.fill f2=[temp1],32
+ ldf.fill f3=[temp2],32
+ ;;
+ ldf.fill f4=[temp1],32
+ ldf.fill f5=[temp2],32
+ ;;
+ ldf.fill f12=[temp1],32
+ ldf.fill f13=[temp2],32
+ ;;
+ ldf.fill f14=[temp1],32
+ ldf.fill f15=[temp2],32
+ ;;
+ ldf.fill f16=[temp1],32
+ ldf.fill f17=[temp2],32
+ ;;
+ ldf.fill f18=[temp1],32
+ ldf.fill f19=[temp2],32
+ ;;
+ ldf.fill f20=[temp1],32
+ ldf.fill f21=[temp2],32
+ ;;
+ ldf.fill f22=[temp1],32
+ ldf.fill f23=[temp2],32
+ ;;
+ ldf.fill f24=[temp1],32
+ ldf.fill f25=[temp2],32
+ ;;
+ ldf.fill f26=[temp1],32
+ ldf.fill f27=[temp2],32
+ ;;
+ ldf.fill f28=[temp1],32
+ ldf.fill f29=[temp2],32
+ ;;
+ ldf.fill f30=[temp1],SW(B2)-SW(F30)
+ ldf.fill f31=[temp2],SW(B3)-SW(F31)
+ ;;
+ ld8 temp3=[temp1],16 // restore b2
+ ld8 temp4=[temp2],16 // restore b3
+ ;;
+ mov b2=temp3
+ mov b3=temp4
+ ld8 temp3=[temp1],SW(AR_LC)-SW(B4) // restore b4
+ ld8 temp4=[temp2] // restore b5
+ ;;
+ mov b4=temp3
+ mov b5=temp4
+ ld8 temp3=[temp1] // restore ar.lc
+ ;;
+ mov ar.lc=temp3
+
+ // Restore the pt_regs data that is not in minstate. The previous code
+ // left regs at switch_stack.
+ add regs=MCA_PT_REGS_OFFSET-MCA_SWITCH_STACK_OFFSET, regs
+ ;;
+ add temp1=PT(B6), regs
+ add temp2=PT(B7), regs
+ ;;
+ ld8 temp3=[temp1],PT(AR_CSD)-PT(B6) // restore b6
+ ld8 temp4=[temp2],PT(AR_SSD)-PT(B7) // restore b7
+ ;;
+ mov b6=temp3
+ mov b7=temp4
+ ld8 temp3=[temp1],PT(AR_UNAT)-PT(AR_CSD) // restore ar.csd
+ ld8 temp4=[temp2],PT(AR_PFS)-PT(AR_SSD) // restore ar.ssd
+ ;;
+ mov ar.csd=temp3
+ mov ar.ssd=temp4
+ ld8 temp3=[temp1] // restore ar.unat
+ add temp1=PT(AR_CCV)-PT(AR_UNAT), temp1
+ ld8 temp4=[temp2],PT(AR_FPSR)-PT(AR_PFS) // restore ar.pfs
+ ;;
+ mov ar.unat=temp3
+ mov ar.pfs=temp4
+ // ar.rnat, ar.bspstore, loadrs are restore in ia64_old_stack.
+ ld8 temp3=[temp1],PT(F6)-PT(AR_CCV) // restore ar.ccv
+ ld8 temp4=[temp2],PT(F7)-PT(AR_FPSR) // restore ar.fpsr
+ ;;
+ mov ar.ccv=temp3
+ mov ar.fpsr=temp4
+ ldf.fill f6=[temp1],PT(F8)-PT(F6)
+ ldf.fill f7=[temp2],PT(F9)-PT(F7)
+ ;;
+ ldf.fill f8=[temp1],PT(F10)-PT(F8)
+ ldf.fill f9=[temp2],PT(F11)-PT(F9)
+ ;;
+ ldf.fill f10=[temp1]
+ ldf.fill f11=[temp2]
+
+ // Restore the SAL to OS state. The previous code left regs at pt_regs.
+ add regs=MCA_SOS_OFFSET-MCA_PT_REGS_OFFSET, regs
+ ;;
+ add temp1=IA64_SAL_OS_STATE_COMMON_OFFSET, regs
+ add temp2=IA64_SAL_OS_STATE_COMMON_OFFSET+8, regs
+ ;;
+ ld8 r12=[temp1],16 // sal_ra
+ ld8 r9=[temp2],16 // sal_gp
+ ;;
+ ld8 r22=[temp1],24 // pal_min_state, virtual. skip prev_task
+ ld8 r21=[temp2],16 // prev_IA64_KR_CURRENT
+ ;;
+ ld8 temp3=[temp1],16 // cr.isr
+ ld8 temp4=[temp2],16 // cr.ifa
+ ;;
+ mov cr.isr=temp3
+ mov cr.ifa=temp4
+ ld8 temp3=[temp1],16 // cr.itir
+ ld8 temp4=[temp2],16 // cr.iipa
+ ;;
+ mov cr.itir=temp3
+ mov cr.iipa=temp4
+ ld8 temp3=[temp1],16 // cr.iim
+ ld8 temp4=[temp2],16 // cr.iha
+ ;;
+ mov cr.iim=temp3
+ mov cr.iha=temp4
+ dep r22=0,r22,62,2 // pal_min_state, physical, uncached
+ mov IA64_KR(CURRENT)=r21
+ ld8 r8=[temp1] // os_status
+ ld8 r10=[temp2] // context
+
+ br.sptk b0
+
+//EndStub//////////////////////////////////////////////////////////////////////
+
+
+//++
+// Name:
+// ia64_new_stack()
+//
+// Stub Description:
+//
+// Switch to the MCA/INIT stack.
+//
+// r2 contains the return address, r3 contains either
+// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET.
+//
+// On entry RBS is still on the original stack, this routine switches RBS
+// to use the MCA/INIT stack.
+//
+// On entry, sos->pal_min_state is physical, on exit it is virtual.
+//
+//--
+
+ia64_new_stack:
+ add regs=MCA_PT_REGS_OFFSET, r3
+ add temp2=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PAL_MIN_STATE_OFFSET, r3
+ mov b0=r2 // save return address
+ GET_IA64_MCA_DATA(temp1)
+ invala
+ ;;
+ add temp2=temp2, temp1 // struct ia64_sal_os_state.pal_min_state on MCA or INIT stack
+ add regs=regs, temp1 // struct pt_regs on MCA or INIT stack
+ ;;
+ // Address of minstate area provided by PAL is physical, uncacheable.
+ // Convert to Linux virtual address in region 6 for C code.
+ ld8 ms=[temp2] // pal_min_state, physical
+ ;;
+ dep temp1=-1,ms,62,2 // set region 6
+ mov temp3=IA64_RBS_OFFSET-MCA_PT_REGS_OFFSET
+ ;;
+ st8 [temp2]=temp1 // pal_min_state, virtual
+
+ add temp4=temp3, regs // start of bspstore on new stack
+ ;;
+ mov ar.bspstore=temp4 // switch RBS to MCA/INIT stack
+ ;;
+ flushrs // must be first in group
+ br.sptk b0
+
+//EndStub//////////////////////////////////////////////////////////////////////
+
+
+//++
+// Name:
+// ia64_old_stack()
+//
+// Stub Description:
+//
+// Switch to the old stack.
+//
+// r2 contains the return address, r3 contains either
+// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET.
+//
+// On entry, pal_min_state is virtual, on exit it is physical.
+//
+// On entry RBS is on the MCA/INIT stack, this routine switches RBS
+// back to the previous stack.
+//
+// The psr is set to all zeroes. SAL return requires either all zeroes or
+// just psr.mc set. Leaving psr.mc off allows INIT to be issued if this
+// code does not perform correctly.
+//
+// The dirty registers at the time of the event were flushed to the
+// MCA/INIT stack in ia64_pt_regs_save(). Restore the dirty registers
+// before reverting to the previous bspstore.
+//--
+
+ia64_old_stack:
+ add regs=MCA_PT_REGS_OFFSET, r3
+ mov b0=r2 // save return address
+ GET_IA64_MCA_DATA(temp2)
+ LOAD_PHYSICAL(p0,temp1,1f)
+ ;;
+ mov cr.ipsr=r0
+ mov cr.ifs=r0
+ mov cr.iip=temp1
+ ;;
+ invala
+ rfi
+1:
+
+ add regs=regs, temp2 // struct pt_regs on MCA or INIT stack
+ ;;
+ add temp1=PT(LOADRS), regs
+ ;;
+ ld8 temp2=[temp1],PT(AR_BSPSTORE)-PT(LOADRS) // restore loadrs
+ ;;
+ ld8 temp3=[temp1],PT(AR_RNAT)-PT(AR_BSPSTORE) // restore ar.bspstore
+ mov ar.rsc=temp2
+ ;;
+ loadrs
+ ld8 temp4=[temp1] // restore ar.rnat
+ ;;
+ mov ar.bspstore=temp3 // back to old stack
+ ;;
+ mov ar.rnat=temp4
+ ;;
+
+ br.sptk b0
+
+//EndStub//////////////////////////////////////////////////////////////////////
+
+
+//++
+// Name:
+// ia64_set_kernel_registers()
+//
+// Stub Description:
+//
+// Set the registers that are required by the C code in order to run on an
+// MCA/INIT stack.
+//
+// r2 contains the return address, r3 contains either
+// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET.
+//
+//--
+
+ia64_set_kernel_registers:
+ add temp3=MCA_SP_OFFSET, r3
+ add temp4=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_OS_GP_OFFSET, r3
+ mov b0=r2 // save return address
+ GET_IA64_MCA_DATA(temp1)
+ ;;
+ add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp
+ add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack
+ add r13=temp1, r3 // set current to start of MCA/INIT stack
+ ;;
+ ld8 r1=[temp4] // OS GP from SAL OS state
+ ;;
+ DATA_PA_TO_VA(r1,temp1)
+ DATA_PA_TO_VA(r12,temp2)
+ DATA_PA_TO_VA(r13,temp3)
+ ;;
+ mov IA64_KR(CURRENT)=r13
+
+ // FIXME: do I need to wire IA64_KR_CURRENT_STACK and IA64_TR_CURRENT_STACK?
+
+ br.sptk b0
+
+//EndStub//////////////////////////////////////////////////////////////////////
+
+#undef ms
+#undef regs
+#undef temp1
+#undef temp2
+#undef temp3
+#undef temp4
+
+
+// Support function for mca.c, it is here to avoid using inline asm. Given the
+// address of an rnat slot, if that address is below the current ar.bspstore
+// then return the contents of that slot, otherwise return the contents of
+// ar.rnat.
+GLOBAL_ENTRY(ia64_get_rnat)
+ alloc r14=ar.pfs,1,0,0,0
+ mov ar.rsc=0
+ ;;
+ mov r14=ar.bspstore
+ ;;
+ cmp.lt p6,p7=in0,r14
+ ;;
+(p6) ld8 r8=[in0]
+(p7) mov r8=ar.rnat
+ mov ar.rsc=3
+ br.ret.sptk.many rp
+END(ia64_get_rnat)
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index abc0113..6e68374 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -4,6 +4,8 @@
*
* Copyright (C) 2004 FUJITSU LIMITED
* Copyright (C) Hidetoshi Seto (seto.hidetoshi@jp.fujitsu.com)
+ * Copyright (C) 2005 Silicon Graphics, Inc
+ * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
*/
#include <linux/config.h>
#include <linux/types.h>
@@ -38,10 +40,6 @@
/* max size of SAL error record (default) */
static int sal_rec_max = 10000;
-/* from mca.c */
-static ia64_mca_sal_to_os_state_t *sal_to_os_handoff_state;
-static ia64_mca_os_to_sal_state_t *os_to_sal_handoff_state;
-
/* from mca_drv_asm.S */
extern void *mca_handler_bhhook(void);
@@ -316,7 +314,8 @@
*/
static mca_type_t
-is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci)
+is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci,
+ struct ia64_sal_os_state *sos)
{
pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx);
@@ -327,7 +326,7 @@
* Therefore it is local MCA when rendezvous has not been requested.
* Failed to rendezvous, the system must be down.
*/
- switch (sal_to_os_handoff_state->imsto_rendez_state) {
+ switch (sos->rv_rc) {
case -1: /* SAL rendezvous unsuccessful */
return MCA_IS_GLOBAL;
case 0: /* SAL rendezvous not required */
@@ -388,7 +387,8 @@
*/
static int
-recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci)
+recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci,
+ struct ia64_sal_os_state *sos)
{
sal_log_mod_error_info_t *smei;
pal_min_state_area_t *pmsa;
@@ -426,7 +426,7 @@
* setup for resume to bottom half of MCA,
* "mca_handler_bhhook"
*/
- pmsa = (pal_min_state_area_t *)(sal_to_os_handoff_state->pal_min_state | (6ul<<61));
+ pmsa = sos->pal_min_state;
/* pass to bhhook as 1st argument (gr8) */
pmsa->pmsa_gr[8-1] = smei->target_identifier;
/* set interrupted return address (but no use) */
@@ -459,7 +459,8 @@
*/
static int
-recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci)
+recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci,
+ struct ia64_sal_os_state *sos)
{
int status = 0;
pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx);
@@ -469,7 +470,7 @@
case 1: /* partial read */
case 3: /* full line(cpu) read */
case 9: /* I/O space read */
- status = recover_from_read_error(slidx, peidx, pbci);
+ status = recover_from_read_error(slidx, peidx, pbci, sos);
break;
case 0: /* unknown */
case 2: /* partial write */
@@ -508,7 +509,8 @@
*/
static int
-recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci)
+recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci,
+ struct ia64_sal_os_state *sos)
{
pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx);
@@ -545,7 +547,7 @@
* This means "there are some platform errors".
*/
if (platform)
- return recover_from_platform_error(slidx, peidx, pbci);
+ return recover_from_platform_error(slidx, peidx, pbci, sos);
/*
* On account of strange SAL error record, we cannot recover.
*/
@@ -562,8 +564,7 @@
static int
mca_try_to_recover(void *rec,
- ia64_mca_sal_to_os_state_t *sal_to_os_state,
- ia64_mca_os_to_sal_state_t *os_to_sal_state)
+ struct ia64_sal_os_state *sos)
{
int platform_err;
int n_proc_err;
@@ -571,10 +572,6 @@
peidx_table_t peidx;
pal_bus_check_info_t pbci;
- /* handoff state from/to mca.c */
- sal_to_os_handoff_state = sal_to_os_state;
- os_to_sal_handoff_state = os_to_sal_state;
-
/* Make index of SAL error record */
platform_err = mca_make_slidx(rec, &slidx);
@@ -597,11 +594,11 @@
*((u64*)&pbci) = peidx_check_info(&peidx, bus_check, 0);
/* Check whether MCA is global or not */
- if (is_mca_global(&peidx, &pbci))
+ if (is_mca_global(&peidx, &pbci, sos))
return 0;
/* Try to recover a processor error */
- return recover_from_processor_error(platform_err, &slidx, &peidx, &pbci);
+ return recover_from_processor_error(platform_err, &slidx, &peidx, &pbci, sos);
}
/*
diff --git a/include/asm-ia64/mca.h b/include/asm-ia64/mca.h
index 149ad01..97a28b8 100644
--- a/include/asm-ia64/mca.h
+++ b/include/asm-ia64/mca.h
@@ -11,8 +11,6 @@
#ifndef _ASM_IA64_MCA_H
#define _ASM_IA64_MCA_H
-#define IA64_MCA_STACK_SIZE 8192
-
#if !defined(__ASSEMBLY__)
#include <linux/interrupt.h>
@@ -48,7 +46,8 @@
enum {
IA64_MCA_RENDEZ_CHECKIN_NOTDONE = 0x0,
- IA64_MCA_RENDEZ_CHECKIN_DONE = 0x1
+ IA64_MCA_RENDEZ_CHECKIN_DONE = 0x1,
+ IA64_MCA_RENDEZ_CHECKIN_INIT = 0x2,
};
/* Information maintained by the MC infrastructure */
@@ -63,18 +62,42 @@
} ia64_mc_info_t;
-typedef struct ia64_mca_sal_to_os_state_s {
- u64 imsto_os_gp; /* GP of the os registered with the SAL */
- u64 imsto_pal_proc; /* PAL_PROC entry point - physical addr */
- u64 imsto_sal_proc; /* SAL_PROC entry point - physical addr */
- u64 imsto_sal_gp; /* GP of the SAL - physical */
- u64 imsto_rendez_state; /* Rendez state information */
- u64 imsto_sal_check_ra; /* Return address in SAL_CHECK while going
- * back to SAL from OS after MCA handling.
- */
- u64 pal_min_state; /* from PAL in r17 */
- u64 proc_state_param; /* from PAL in r18. See SDV 2:268 11.3.2.1 */
-} ia64_mca_sal_to_os_state_t;
+/* Handover state from SAL to OS and vice versa, for both MCA and INIT events.
+ * Besides the handover state, it also contains some saved registers from the
+ * time of the event.
+ * Note: mca_asm.S depends on the precise layout of this structure.
+ */
+
+struct ia64_sal_os_state {
+ /* SAL to OS, must be at offset 0 */
+ u64 os_gp; /* GP of the os registered with the SAL, physical */
+ u64 pal_proc; /* PAL_PROC entry point, physical */
+ u64 sal_proc; /* SAL_PROC entry point, physical */
+ u64 rv_rc; /* MCA - Rendezvous state, INIT - reason code */
+ u64 proc_state_param; /* from R18 */
+ u64 monarch; /* 1 for a monarch event, 0 for a slave */
+ /* common, must follow SAL to OS */
+ u64 sal_ra; /* Return address in SAL, physical */
+ u64 sal_gp; /* GP of the SAL - physical */
+ pal_min_state_area_t *pal_min_state; /* from R17. physical in asm, virtual in C */
+ u64 prev_IA64_KR_CURRENT; /* previous value of IA64_KR(CURRENT) */
+ struct task_struct *prev_task; /* previous task, NULL if it is not useful */
+ /* Some interrupt registers are not saved in minstate, pt_regs or
+ * switch_stack. Because MCA/INIT can occur when interrupts are
+ * disabled, we need to save the additional interrupt registers over
+ * MCA/INIT and resume.
+ */
+ u64 isr;
+ u64 ifa;
+ u64 itir;
+ u64 iipa;
+ u64 iim;
+ u64 iha;
+ /* OS to SAL, must follow common */
+ u64 os_status; /* OS status to SAL, enum below */
+ u64 context; /* 0 if return to same context
+ 1 if return to new context */
+};
enum {
IA64_MCA_CORRECTED = 0x0, /* Error has been corrected by OS_MCA */
@@ -84,35 +107,21 @@
};
enum {
+ IA64_INIT_RESUME = 0x0, /* Resume after return from INIT */
+ IA64_INIT_WARM_BOOT = -1, /* Warm boot of the system need from SAL */
+};
+
+enum {
IA64_MCA_SAME_CONTEXT = 0x0, /* SAL to return to same context */
IA64_MCA_NEW_CONTEXT = -1 /* SAL to return to new context */
};
-typedef struct ia64_mca_os_to_sal_state_s {
- u64 imots_os_status; /* OS status to SAL as to what happened
- * with the MCA handling.
- */
- u64 imots_sal_gp; /* GP of the SAL - physical */
- u64 imots_context; /* 0 if return to same context
- 1 if return to new context */
- u64 *imots_new_min_state; /* Pointer to structure containing
- * new values of registers in the min state
- * save area.
- */
- u64 imots_sal_check_ra; /* Return address in SAL_CHECK while going
- * back to SAL from OS after MCA handling.
- */
-} ia64_mca_os_to_sal_state_t;
-
/* Per-CPU MCA state that is too big for normal per-CPU variables. */
struct ia64_mca_cpu {
- u64 stack[IA64_MCA_STACK_SIZE/8]; /* MCA memory-stack */
- u64 proc_state_dump[512];
- u64 stackframe[32];
- u64 rbstore[IA64_MCA_STACK_SIZE/8]; /* MCA reg.-backing store */
+ u64 mca_stack[KERNEL_STACK_SIZE/8];
u64 init_stack[KERNEL_STACK_SIZE/8];
-} __attribute__ ((aligned(16)));
+};
/* Array of physical addresses of each CPU's MCA area. */
extern unsigned long __per_cpu_mca[NR_CPUS];
@@ -121,12 +130,29 @@
extern void ia64_mca_cpu_init(void *);
extern void ia64_os_mca_dispatch(void);
extern void ia64_os_mca_dispatch_end(void);
-extern void ia64_mca_ucmc_handler(void);
+extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *);
+extern void ia64_init_handler(struct pt_regs *,
+ struct switch_stack *,
+ struct ia64_sal_os_state *);
extern void ia64_monarch_init_handler(void);
extern void ia64_slave_init_handler(void);
extern void ia64_mca_cmc_vector_setup(void);
-extern int ia64_reg_MCA_extension(void*);
+extern int ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *));
extern void ia64_unreg_MCA_extension(void);
+extern u64 ia64_get_rnat(u64 *);
+
+#else /* __ASSEMBLY__ */
+
+#define IA64_MCA_CORRECTED 0x0 /* Error has been corrected by OS_MCA */
+#define IA64_MCA_WARM_BOOT -1 /* Warm boot of the system need from SAL */
+#define IA64_MCA_COLD_BOOT -2 /* Cold boot of the system need from SAL */
+#define IA64_MCA_HALT -3 /* System to be halted by SAL */
+
+#define IA64_INIT_RESUME 0x0 /* Resume after return from INIT */
+#define IA64_INIT_WARM_BOOT -1 /* Warm boot of the system need from SAL */
+
+#define IA64_MCA_SAME_CONTEXT 0x0 /* SAL to return to same context */
+#define IA64_MCA_NEW_CONTEXT -1 /* SAL to return to new context */
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_IA64_MCA_H */
diff --git a/include/asm-ia64/mca_asm.h b/include/asm-ia64/mca_asm.h
index 836953e..27c9203 100644
--- a/include/asm-ia64/mca_asm.h
+++ b/include/asm-ia64/mca_asm.h
@@ -8,6 +8,8 @@
* Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2005 Silicon Graphics, Inc
+ * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
*/
#ifndef _ASM_IA64_MCA_ASM_H
#define _ASM_IA64_MCA_ASM_H
@@ -207,106 +209,33 @@
;;
/*
- * The following offsets capture the order in which the
- * RSE related registers from the old context are
- * saved onto the new stack frame.
+ * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
+ * stacks, except that the SAL/OS state and a switch_stack are stored near the
+ * top of the MCA/INIT stack. To support concurrent entry to MCA or INIT, as
+ * well as MCA over INIT, each event needs its own SAL/OS state. All entries
+ * are 16 byte aligned.
*
- * +-----------------------+
- * |NDIRTY [BSP - BSPSTORE]|
- * +-----------------------+
- * | RNAT |
- * +-----------------------+
- * | BSPSTORE |
- * +-----------------------+
- * | IFS |
- * +-----------------------+
- * | PFS |
- * +-----------------------+
- * | RSC |
- * +-----------------------+ <-------- Bottom of new stack frame
+ * +---------------------------+
+ * | pt_regs |
+ * +---------------------------+
+ * | switch_stack |
+ * +---------------------------+
+ * | SAL/OS state |
+ * +---------------------------+
+ * | 16 byte scratch area |
+ * +---------------------------+ <-------- SP at start of C MCA handler
+ * | ..... |
+ * +---------------------------+
+ * | RBS for MCA/INIT handler |
+ * +---------------------------+
+ * | struct task for MCA/INIT |
+ * +---------------------------+ <-------- Bottom of MCA/INIT stack
*/
-#define rse_rsc_offset 0
-#define rse_pfs_offset (rse_rsc_offset+0x08)
-#define rse_ifs_offset (rse_pfs_offset+0x08)
-#define rse_bspstore_offset (rse_ifs_offset+0x08)
-#define rse_rnat_offset (rse_bspstore_offset+0x08)
-#define rse_ndirty_offset (rse_rnat_offset+0x08)
-/*
- * rse_switch_context
- *
- * 1. Save old RSC onto the new stack frame
- * 2. Save PFS onto new stack frame
- * 3. Cover the old frame and start a new frame.
- * 4. Save IFS onto new stack frame
- * 5. Save the old BSPSTORE on the new stack frame
- * 6. Save the old RNAT on the new stack frame
- * 7. Write BSPSTORE with the new backing store pointer
- * 8. Read and save the new BSP to calculate the #dirty registers
- * NOTE: Look at pages 11-10, 11-11 in PRM Vol 2
- */
-#define rse_switch_context(temp,p_stackframe,p_bspstore) \
- ;; \
- mov temp=ar.rsc;; \
- st8 [p_stackframe]=temp,8;; \
- mov temp=ar.pfs;; \
- st8 [p_stackframe]=temp,8; \
- cover ;; \
- mov temp=cr.ifs;; \
- st8 [p_stackframe]=temp,8;; \
- mov temp=ar.bspstore;; \
- st8 [p_stackframe]=temp,8;; \
- mov temp=ar.rnat;; \
- st8 [p_stackframe]=temp,8; \
- mov ar.bspstore=p_bspstore;; \
- mov temp=ar.bsp;; \
- sub temp=temp,p_bspstore;; \
- st8 [p_stackframe]=temp,8;;
-
-/*
- * rse_return_context
- * 1. Allocate a zero-sized frame
- * 2. Store the number of dirty registers RSC.loadrs field
- * 3. Issue a loadrs to insure that any registers from the interrupted
- * context which were saved on the new stack frame have been loaded
- * back into the stacked registers
- * 4. Restore BSPSTORE
- * 5. Restore RNAT
- * 6. Restore PFS
- * 7. Restore IFS
- * 8. Restore RSC
- * 9. Issue an RFI
- */
-#define rse_return_context(psr_mask_reg,temp,p_stackframe) \
- ;; \
- alloc temp=ar.pfs,0,0,0,0; \
- add p_stackframe=rse_ndirty_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- shl temp=temp,16;; \
- mov ar.rsc=temp;; \
- loadrs;; \
- add p_stackframe=-rse_ndirty_offset+rse_bspstore_offset,p_stackframe;;\
- ld8 temp=[p_stackframe];; \
- mov ar.bspstore=temp;; \
- add p_stackframe=-rse_bspstore_offset+rse_rnat_offset,p_stackframe;;\
- ld8 temp=[p_stackframe];; \
- mov ar.rnat=temp;; \
- add p_stackframe=-rse_rnat_offset+rse_pfs_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- mov ar.pfs=temp;; \
- add p_stackframe=-rse_pfs_offset+rse_ifs_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- mov cr.ifs=temp;; \
- add p_stackframe=-rse_ifs_offset+rse_rsc_offset,p_stackframe;; \
- ld8 temp=[p_stackframe];; \
- mov ar.rsc=temp ; \
- mov temp=psr;; \
- or temp=temp,psr_mask_reg;; \
- mov cr.ipsr=temp;; \
- mov temp=ip;; \
- add temp=0x30,temp;; \
- mov cr.iip=temp;; \
- srlz.i;; \
- rfi;;
+#define ALIGN16(x) ((x)&~15)
+#define MCA_PT_REGS_OFFSET ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
+#define MCA_SWITCH_STACK_OFFSET ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
+#define MCA_SOS_OFFSET ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
+#define MCA_SP_OFFSET ALIGN16(MCA_SOS_OFFSET-16)
#endif /* _ASM_IA64_MCA_ASM_H */
