blob: 5a1cde0ea3601818456b44b51c0cc059ece726e0 [file] [log] [blame]
/*
* pata_sch.c - Intel SCH PATA controllers
*
* Copyright (c) 2008 Alek Du <alek.du@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/*
* Supports:
* Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
* http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>
#define DRV_NAME "pata_sch"
#define DRV_VERSION "0.2"
/* see SCH datasheet page 351 */
enum {
D0TIM = 0x80, /* Device 0 Timing Register */
D1TIM = 0x84, /* Device 1 Timing Register */
PM = 0x07, /* PIO Mode Bit Mask */
MDM = (0x03 << 8), /* Multi-word DMA Mode Bit Mask */
UDM = (0x07 << 16), /* Ultra DMA Mode Bit Mask */
PPE = (1 << 30), /* Prefetch/Post Enable */
USD = (1 << 31), /* Use Synchronous DMA */
};
static int sch_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static const struct pci_device_id sch_pci_tbl[] = {
/* Intel SCH PATA Controller */
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
{ } /* terminate list */
};
static struct pci_driver sch_pci_driver = {
.name = DRV_NAME,
.id_table = sch_pci_tbl,
.probe = sch_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
static struct scsi_host_template sch_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sch_pata_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_unknown,
.set_piomode = sch_set_piomode,
.set_dmamode = sch_set_dmamode,
};
static struct ata_port_info sch_port_info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
.port_ops = &sch_pata_ops,
};
MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sch_pci_tbl);
MODULE_VERSION(DRV_VERSION);
/**
* sch_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: ATA device
*
* Set PIO mode for device, in host controller PCI config space.
*
* LOCKING:
* None (inherited from caller).
*/
static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned int port = adev->devno ? D1TIM : D0TIM;
unsigned int data;
pci_read_config_dword(dev, port, &data);
/* see SCH datasheet page 351 */
/* set PIO mode */
data &= ~(PM | PPE);
data |= pio;
/* enable PPE for block device */
if (adev->class == ATA_DEV_ATA)
data |= PPE;
pci_write_config_dword(dev, port, data);
}
/**
* sch_set_dmamode - Initialize host controller PATA DMA timings
* @ap: Port whose timings we are configuring
* @adev: ATA device
*
* Set MW/UDMA mode for device, in host controller PCI config space.
*
* LOCKING:
* None (inherited from caller).
*/
static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
unsigned int dma_mode = adev->dma_mode;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned int port = adev->devno ? D1TIM : D0TIM;
unsigned int data;
pci_read_config_dword(dev, port, &data);
/* see SCH datasheet page 351 */
if (dma_mode >= XFER_UDMA_0) {
/* enable Synchronous DMA mode */
data |= USD;
data &= ~UDM;
data |= (dma_mode - XFER_UDMA_0) << 16;
} else { /* must be MWDMA mode, since we masked SWDMA already */
data &= ~(USD | MDM);
data |= (dma_mode - XFER_MW_DMA_0) << 8;
}
pci_write_config_dword(dev, port, data);
}
/**
* sch_init_one - Register SCH ATA PCI device with kernel services
* @pdev: PCI device to register
* @ent: Entry in sch_pci_tbl matching with @pdev
*
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
* Zero on success, or -ERRNO value.
*/
static int sch_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
const struct ata_port_info *ppi[] = { &sch_port_info, NULL };
ata_print_version_once(&pdev->dev, DRV_VERSION);
return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
}
module_pci_driver(sch_pci_driver);