blob: f01c0ee0c87ebd94debc320f5714bf247dfe5ab7 [file] [log] [blame]
/*
* arch/arm/common/bL_switcher.c -- big.LITTLE cluster switcher core driver
*
* Created by: Nicolas Pitre, March 2012
* Copyright: (C) 2012-2013 Linaro Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/atomic.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/cpu_pm.h>
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/time.h>
#include <linux/clockchips.h>
#include <linux/hrtimer.h>
#include <linux/tick.h>
#include <linux/notifier.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/sysfs.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/moduleparam.h>
#include <asm/smp_plat.h>
#include <asm/cputype.h>
#include <asm/suspend.h>
#include <asm/mcpm.h>
#include <asm/bL_switcher.h>
#define CREATE_TRACE_POINTS
#include <trace/events/power_cpu_migrate.h>
/*
* Use our own MPIDR accessors as the generic ones in asm/cputype.h have
* __attribute_const__ and we don't want the compiler to assume any
* constness here as the value _does_ change along some code paths.
*/
static int read_mpidr(void)
{
unsigned int id;
asm volatile ("mrc p15, 0, %0, c0, c0, 5" : "=r" (id));
return id & MPIDR_HWID_BITMASK;
}
/*
* Get a global nanosecond time stamp for tracing.
*/
static s64 get_ns(void)
{
struct timespec ts;
getnstimeofday(&ts);
return timespec_to_ns(&ts);
}
/*
* bL switcher core code.
*/
static void bL_do_switch(void *_arg)
{
unsigned ib_mpidr, ib_cpu, ib_cluster;
long volatile handshake, **handshake_ptr = _arg;
pr_debug("%s\n", __func__);
ib_mpidr = cpu_logical_map(smp_processor_id());
ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
/* Advertise our handshake location */
if (handshake_ptr) {
handshake = 0;
*handshake_ptr = &handshake;
} else
handshake = -1;
/*
* Our state has been saved at this point. Let's release our
* inbound CPU.
*/
mcpm_set_entry_vector(ib_cpu, ib_cluster, cpu_resume);
sev();
/*
* From this point, we must assume that our counterpart CPU might
* have taken over in its parallel world already, as if execution
* just returned from cpu_suspend(). It is therefore important to
* be very careful not to make any change the other guy is not
* expecting. This is why we need stack isolation.
*
* Fancy under cover tasks could be performed here. For now
* we have none.
*/
/*
* Let's wait until our inbound is alive.
*/
while (!handshake) {
wfe();
smp_mb();
}
/* Let's put ourself down. */
mcpm_cpu_power_down();
/* should never get here */
BUG();
}
/*
* Stack isolation. To ensure 'current' remains valid, we just use another
* piece of our thread's stack space which should be fairly lightly used.
* The selected area starts just above the thread_info structure located
* at the very bottom of the stack, aligned to a cache line, and indexed
* with the cluster number.
*/
#define STACK_SIZE 512
extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
static int bL_switchpoint(unsigned long _arg)
{
unsigned int mpidr = read_mpidr();
unsigned int clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
void *stack = current_thread_info() + 1;
stack = PTR_ALIGN(stack, L1_CACHE_BYTES);
stack += clusterid * STACK_SIZE + STACK_SIZE;
call_with_stack(bL_do_switch, (void *)_arg, stack);
BUG();
}
/*
* Generic switcher interface
*/
static unsigned int bL_gic_id[MAX_CPUS_PER_CLUSTER][MAX_NR_CLUSTERS];
static int bL_switcher_cpu_pairing[NR_CPUS];
/*
* bL_switch_to - Switch to a specific cluster for the current CPU
* @new_cluster_id: the ID of the cluster to switch to.
*
* This function must be called on the CPU to be switched.
* Returns 0 on success, else a negative status code.
*/
static int bL_switch_to(unsigned int new_cluster_id)
{
unsigned int mpidr, this_cpu, that_cpu;
unsigned int ob_mpidr, ob_cpu, ob_cluster, ib_mpidr, ib_cpu, ib_cluster;
struct completion inbound_alive;
struct tick_device *tdev;
enum clock_event_mode tdev_mode;
long volatile *handshake_ptr;
int ipi_nr, ret;
this_cpu = smp_processor_id();
ob_mpidr = read_mpidr();
ob_cpu = MPIDR_AFFINITY_LEVEL(ob_mpidr, 0);
ob_cluster = MPIDR_AFFINITY_LEVEL(ob_mpidr, 1);
BUG_ON(cpu_logical_map(this_cpu) != ob_mpidr);
if (new_cluster_id == ob_cluster)
return 0;
that_cpu = bL_switcher_cpu_pairing[this_cpu];
ib_mpidr = cpu_logical_map(that_cpu);
ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
pr_debug("before switch: CPU %d MPIDR %#x -> %#x\n",
this_cpu, ob_mpidr, ib_mpidr);
this_cpu = smp_processor_id();
/* Close the gate for our entry vectors */
mcpm_set_entry_vector(ob_cpu, ob_cluster, NULL);
mcpm_set_entry_vector(ib_cpu, ib_cluster, NULL);
/* Install our "inbound alive" notifier. */
init_completion(&inbound_alive);
ipi_nr = register_ipi_completion(&inbound_alive, this_cpu);
ipi_nr |= ((1 << 16) << bL_gic_id[ob_cpu][ob_cluster]);
mcpm_set_early_poke(ib_cpu, ib_cluster, gic_get_sgir_physaddr(), ipi_nr);
/*
* Let's wake up the inbound CPU now in case it requires some delay
* to come online, but leave it gated in our entry vector code.
*/
ret = mcpm_cpu_power_up(ib_cpu, ib_cluster);
if (ret) {
pr_err("%s: mcpm_cpu_power_up() returned %d\n", __func__, ret);
return ret;
}
/*
* Raise a SGI on the inbound CPU to make sure it doesn't stall
* in a possible WFI, such as in bL_power_down().
*/
gic_send_sgi(bL_gic_id[ib_cpu][ib_cluster], 0);
/*
* Wait for the inbound to come up. This allows for other
* tasks to be scheduled in the mean time.
*/
wait_for_completion(&inbound_alive);
mcpm_set_early_poke(ib_cpu, ib_cluster, 0, 0);
/*
* From this point we are entering the switch critical zone
* and can't take any interrupts anymore.
*/
local_irq_disable();
local_fiq_disable();
trace_cpu_migrate_begin(get_ns(), ob_mpidr);
/* redirect GIC's SGIs to our counterpart */
gic_migrate_target(bL_gic_id[ib_cpu][ib_cluster]);
tdev = tick_get_device(this_cpu);
if (tdev && !cpumask_equal(tdev->evtdev->cpumask, cpumask_of(this_cpu)))
tdev = NULL;
if (tdev) {
tdev_mode = tdev->evtdev->mode;
clockevents_set_mode(tdev->evtdev, CLOCK_EVT_MODE_SHUTDOWN);
}
ret = cpu_pm_enter();
/* we can not tolerate errors at this point */
if (ret)
panic("%s: cpu_pm_enter() returned %d\n", __func__, ret);
/* Swap the physical CPUs in the logical map for this logical CPU. */
cpu_logical_map(this_cpu) = ib_mpidr;
cpu_logical_map(that_cpu) = ob_mpidr;
/* Let's do the actual CPU switch. */
ret = cpu_suspend((unsigned long)&handshake_ptr, bL_switchpoint);
if (ret > 0)
panic("%s: cpu_suspend() returned %d\n", __func__, ret);
/* We are executing on the inbound CPU at this point */
mpidr = read_mpidr();
pr_debug("after switch: CPU %d MPIDR %#x\n", this_cpu, mpidr);
BUG_ON(mpidr != ib_mpidr);
mcpm_cpu_powered_up();
ret = cpu_pm_exit();
if (tdev) {
clockevents_set_mode(tdev->evtdev, tdev_mode);
clockevents_program_event(tdev->evtdev,
tdev->evtdev->next_event, 1);
}
trace_cpu_migrate_finish(get_ns(), ib_mpidr);
local_fiq_enable();
local_irq_enable();
*handshake_ptr = 1;
dsb_sev();
if (ret)
pr_err("%s exiting with error %d\n", __func__, ret);
return ret;
}
struct bL_thread {
spinlock_t lock;
struct task_struct *task;
wait_queue_head_t wq;
int wanted_cluster;
struct completion started;
bL_switch_completion_handler completer;
void *completer_cookie;
};
static struct bL_thread bL_threads[NR_CPUS];
static int bL_switcher_thread(void *arg)
{
struct bL_thread *t = arg;
struct sched_param param = { .sched_priority = 1 };
int cluster;
bL_switch_completion_handler completer;
void *completer_cookie;
sched_setscheduler_nocheck(current, SCHED_FIFO, &param);
complete(&t->started);
do {
if (signal_pending(current))
flush_signals(current);
wait_event_interruptible(t->wq,
t->wanted_cluster != -1 ||
kthread_should_stop());
spin_lock(&t->lock);
cluster = t->wanted_cluster;
completer = t->completer;
completer_cookie = t->completer_cookie;
t->wanted_cluster = -1;
t->completer = NULL;
spin_unlock(&t->lock);
if (cluster != -1) {
bL_switch_to(cluster);
if (completer)
completer(completer_cookie);
}
} while (!kthread_should_stop());
return 0;
}
static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
{
struct task_struct *task;
task = kthread_create_on_node(bL_switcher_thread, arg,
cpu_to_node(cpu), "kswitcher_%d", cpu);
if (!IS_ERR(task)) {
kthread_bind(task, cpu);
wake_up_process(task);
} else
pr_err("%s failed for CPU %d\n", __func__, cpu);
return task;
}
/*
* bL_switch_request_cb - Switch to a specific cluster for the given CPU,
* with completion notification via a callback
*
* @cpu: the CPU to switch
* @new_cluster_id: the ID of the cluster to switch to.
* @completer: switch completion callback. if non-NULL,
* @completer(@completer_cookie) will be called on completion of
* the switch, in non-atomic context.
* @completer_cookie: opaque context argument for @completer.
*
* This function causes a cluster switch on the given CPU by waking up
* the appropriate switcher thread. This function may or may not return
* before the switch has occurred.
*
* If a @completer callback function is supplied, it will be called when
* the switch is complete. This can be used to determine asynchronously
* when the switch is complete, regardless of when bL_switch_request()
* returns. When @completer is supplied, no new switch request is permitted
* for the affected CPU until after the switch is complete, and @completer
* has returned.
*/
int bL_switch_request_cb(unsigned int cpu, unsigned int new_cluster_id,
bL_switch_completion_handler completer,
void *completer_cookie)
{
struct bL_thread *t;
if (cpu >= ARRAY_SIZE(bL_threads)) {
pr_err("%s: cpu %d out of bounds\n", __func__, cpu);
return -EINVAL;
}
t = &bL_threads[cpu];
if (IS_ERR(t->task))
return PTR_ERR(t->task);
if (!t->task)
return -ESRCH;
spin_lock(&t->lock);
if (t->completer) {
spin_unlock(&t->lock);
return -EBUSY;
}
t->completer = completer;
t->completer_cookie = completer_cookie;
t->wanted_cluster = new_cluster_id;
spin_unlock(&t->lock);
wake_up(&t->wq);
return 0;
}
EXPORT_SYMBOL_GPL(bL_switch_request_cb);
/*
* Activation and configuration code.
*/
static DEFINE_MUTEX(bL_switcher_activation_lock);
static BLOCKING_NOTIFIER_HEAD(bL_activation_notifier);
static unsigned int bL_switcher_active;
static unsigned int bL_switcher_cpu_original_cluster[NR_CPUS];
static cpumask_t bL_switcher_removed_logical_cpus;
int bL_switcher_register_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&bL_activation_notifier, nb);
}
EXPORT_SYMBOL_GPL(bL_switcher_register_notifier);
int bL_switcher_unregister_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_unregister(&bL_activation_notifier, nb);
}
EXPORT_SYMBOL_GPL(bL_switcher_unregister_notifier);
static int bL_activation_notify(unsigned long val)
{
int ret;
ret = blocking_notifier_call_chain(&bL_activation_notifier, val, NULL);
if (ret & NOTIFY_STOP_MASK)
pr_err("%s: notifier chain failed with status 0x%x\n",
__func__, ret);
return notifier_to_errno(ret);
}
static void bL_switcher_restore_cpus(void)
{
int i;
for_each_cpu(i, &bL_switcher_removed_logical_cpus)
cpu_up(i);
}
static int bL_switcher_halve_cpus(void)
{
int i, j, cluster_0, gic_id, ret;
unsigned int cpu, cluster, mask;
cpumask_t available_cpus;
/* First pass to validate what we have */
mask = 0;
for_each_online_cpu(i) {
cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
if (cluster >= 2) {
pr_err("%s: only dual cluster systems are supported\n", __func__);
return -EINVAL;
}
if (WARN_ON(cpu >= MAX_CPUS_PER_CLUSTER))
return -EINVAL;
mask |= (1 << cluster);
}
if (mask != 3) {
pr_err("%s: no CPU pairing possible\n", __func__);
return -EINVAL;
}
/*
* Now let's do the pairing. We match each CPU with another CPU
* from a different cluster. To get a uniform scheduling behavior
* without fiddling with CPU topology and compute capacity data,
* we'll use logical CPUs initially belonging to the same cluster.
*/
memset(bL_switcher_cpu_pairing, -1, sizeof(bL_switcher_cpu_pairing));
cpumask_copy(&available_cpus, cpu_online_mask);
cluster_0 = -1;
for_each_cpu(i, &available_cpus) {
int match = -1;
cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
if (cluster_0 == -1)
cluster_0 = cluster;
if (cluster != cluster_0)
continue;
cpumask_clear_cpu(i, &available_cpus);
for_each_cpu(j, &available_cpus) {
cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(j), 1);
/*
* Let's remember the last match to create "odd"
* pairings on purpose in order for other code not
* to assume any relation between physical and
* logical CPU numbers.
*/
if (cluster != cluster_0)
match = j;
}
if (match != -1) {
bL_switcher_cpu_pairing[i] = match;
cpumask_clear_cpu(match, &available_cpus);
pr_info("CPU%d paired with CPU%d\n", i, match);
}
}
/*
* Now we disable the unwanted CPUs i.e. everything that has no
* pairing information (that includes the pairing counterparts).
*/
cpumask_clear(&bL_switcher_removed_logical_cpus);
for_each_online_cpu(i) {
cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
/* Let's take note of the GIC ID for this CPU */
gic_id = gic_get_cpu_id(i);
if (gic_id < 0) {
pr_err("%s: bad GIC ID for CPU %d\n", __func__, i);
bL_switcher_restore_cpus();
return -EINVAL;
}
bL_gic_id[cpu][cluster] = gic_id;
pr_info("GIC ID for CPU %u cluster %u is %u\n",
cpu, cluster, gic_id);
if (bL_switcher_cpu_pairing[i] != -1) {
bL_switcher_cpu_original_cluster[i] = cluster;
continue;
}
ret = cpu_down(i);
if (ret) {
bL_switcher_restore_cpus();
return ret;
}
cpumask_set_cpu(i, &bL_switcher_removed_logical_cpus);
}
return 0;
}
/* Determine the logical CPU a given physical CPU is grouped on. */
int bL_switcher_get_logical_index(u32 mpidr)
{
int cpu;
if (!bL_switcher_active)
return -EUNATCH;
mpidr &= MPIDR_HWID_BITMASK;
for_each_online_cpu(cpu) {
int pairing = bL_switcher_cpu_pairing[cpu];
if (pairing == -1)
continue;
if ((mpidr == cpu_logical_map(cpu)) ||
(mpidr == cpu_logical_map(pairing)))
return cpu;
}
return -EINVAL;
}
static void bL_switcher_trace_trigger_cpu(void *__always_unused info)
{
trace_cpu_migrate_current(get_ns(), read_mpidr());
}
int bL_switcher_trace_trigger(void)
{
int ret;
preempt_disable();
bL_switcher_trace_trigger_cpu(NULL);
ret = smp_call_function(bL_switcher_trace_trigger_cpu, NULL, true);
preempt_enable();
return ret;
}
EXPORT_SYMBOL_GPL(bL_switcher_trace_trigger);
static int bL_switcher_enable(void)
{
int cpu, ret;
mutex_lock(&bL_switcher_activation_lock);
lock_device_hotplug();
if (bL_switcher_active) {
unlock_device_hotplug();
mutex_unlock(&bL_switcher_activation_lock);
return 0;
}
pr_info("big.LITTLE switcher initializing\n");
ret = bL_activation_notify(BL_NOTIFY_PRE_ENABLE);
if (ret)
goto error;
ret = bL_switcher_halve_cpus();
if (ret)
goto error;
bL_switcher_trace_trigger();
for_each_online_cpu(cpu) {
struct bL_thread *t = &bL_threads[cpu];
spin_lock_init(&t->lock);
init_waitqueue_head(&t->wq);
init_completion(&t->started);
t->wanted_cluster = -1;
t->task = bL_switcher_thread_create(cpu, t);
}
bL_switcher_active = 1;
bL_activation_notify(BL_NOTIFY_POST_ENABLE);
pr_info("big.LITTLE switcher initialized\n");
goto out;
error:
pr_warn("big.LITTLE switcher initialization failed\n");
bL_activation_notify(BL_NOTIFY_POST_DISABLE);
out:
unlock_device_hotplug();
mutex_unlock(&bL_switcher_activation_lock);
return ret;
}
#ifdef CONFIG_SYSFS
static void bL_switcher_disable(void)
{
unsigned int cpu, cluster;
struct bL_thread *t;
struct task_struct *task;
mutex_lock(&bL_switcher_activation_lock);
lock_device_hotplug();
if (!bL_switcher_active)
goto out;
if (bL_activation_notify(BL_NOTIFY_PRE_DISABLE) != 0) {
bL_activation_notify(BL_NOTIFY_POST_ENABLE);
goto out;
}
bL_switcher_active = 0;
/*
* To deactivate the switcher, we must shut down the switcher
* threads to prevent any other requests from being accepted.
* Then, if the final cluster for given logical CPU is not the
* same as the original one, we'll recreate a switcher thread
* just for the purpose of switching the CPU back without any
* possibility for interference from external requests.
*/
for_each_online_cpu(cpu) {
t = &bL_threads[cpu];
task = t->task;
t->task = NULL;
if (!task || IS_ERR(task))
continue;
kthread_stop(task);
/* no more switch may happen on this CPU at this point */
cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
if (cluster == bL_switcher_cpu_original_cluster[cpu])
continue;
init_completion(&t->started);
t->wanted_cluster = bL_switcher_cpu_original_cluster[cpu];
task = bL_switcher_thread_create(cpu, t);
if (!IS_ERR(task)) {
wait_for_completion(&t->started);
kthread_stop(task);
cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
if (cluster == bL_switcher_cpu_original_cluster[cpu])
continue;
}
/* If execution gets here, we're in trouble. */
pr_crit("%s: unable to restore original cluster for CPU %d\n",
__func__, cpu);
pr_crit("%s: CPU %d can't be restored\n",
__func__, bL_switcher_cpu_pairing[cpu]);
cpumask_clear_cpu(bL_switcher_cpu_pairing[cpu],
&bL_switcher_removed_logical_cpus);
}
bL_switcher_restore_cpus();
bL_switcher_trace_trigger();
bL_activation_notify(BL_NOTIFY_POST_DISABLE);
out:
unlock_device_hotplug();
mutex_unlock(&bL_switcher_activation_lock);
}
static ssize_t bL_switcher_active_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", bL_switcher_active);
}
static ssize_t bL_switcher_active_store(struct kobject *kobj,
struct kobj_attribute *attr, const char *buf, size_t count)
{
int ret;
switch (buf[0]) {
case '0':
bL_switcher_disable();
ret = 0;
break;
case '1':
ret = bL_switcher_enable();
break;
default:
ret = -EINVAL;
}
return (ret >= 0) ? count : ret;
}
static ssize_t bL_switcher_trace_trigger_store(struct kobject *kobj,
struct kobj_attribute *attr, const char *buf, size_t count)
{
int ret = bL_switcher_trace_trigger();
return ret ? ret : count;
}
static struct kobj_attribute bL_switcher_active_attr =
__ATTR(active, 0644, bL_switcher_active_show, bL_switcher_active_store);
static struct kobj_attribute bL_switcher_trace_trigger_attr =
__ATTR(trace_trigger, 0200, NULL, bL_switcher_trace_trigger_store);
static struct attribute *bL_switcher_attrs[] = {
&bL_switcher_active_attr.attr,
&bL_switcher_trace_trigger_attr.attr,
NULL,
};
static struct attribute_group bL_switcher_attr_group = {
.attrs = bL_switcher_attrs,
};
static struct kobject *bL_switcher_kobj;
static int __init bL_switcher_sysfs_init(void)
{
int ret;
bL_switcher_kobj = kobject_create_and_add("bL_switcher", kernel_kobj);
if (!bL_switcher_kobj)
return -ENOMEM;
ret = sysfs_create_group(bL_switcher_kobj, &bL_switcher_attr_group);
if (ret)
kobject_put(bL_switcher_kobj);
return ret;
}
#endif /* CONFIG_SYSFS */
bool bL_switcher_get_enabled(void)
{
mutex_lock(&bL_switcher_activation_lock);
return bL_switcher_active;
}
EXPORT_SYMBOL_GPL(bL_switcher_get_enabled);
void bL_switcher_put_enabled(void)
{
mutex_unlock(&bL_switcher_activation_lock);
}
EXPORT_SYMBOL_GPL(bL_switcher_put_enabled);
/*
* Veto any CPU hotplug operation on those CPUs we've removed
* while the switcher is active.
* We're just not ready to deal with that given the trickery involved.
*/
static int bL_switcher_hotplug_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
if (bL_switcher_active) {
int pairing = bL_switcher_cpu_pairing[(unsigned long)hcpu];
switch (action & 0xf) {
case CPU_UP_PREPARE:
case CPU_DOWN_PREPARE:
if (pairing == -1)
return NOTIFY_BAD;
}
}
return NOTIFY_DONE;
}
static bool no_bL_switcher;
core_param(no_bL_switcher, no_bL_switcher, bool, 0644);
static int __init bL_switcher_init(void)
{
int ret;
if (!mcpm_is_available())
return -ENODEV;
cpu_notifier(bL_switcher_hotplug_callback, 0);
if (!no_bL_switcher) {
ret = bL_switcher_enable();
if (ret)
return ret;
}
#ifdef CONFIG_SYSFS
ret = bL_switcher_sysfs_init();
if (ret)
pr_err("%s: unable to create sysfs entry\n", __func__);
#endif
return 0;
}
late_initcall(bL_switcher_init);