blob: 7d8cb92831d7b762288f5dea2a6b754db95cfaa9 [file] [log] [blame]
Qualcomm PM8xxx PMIC Keypad
PROPERTIES
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,pm8058-keypad"
"qcom,pm8921-keypad"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: address of keypad control register
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: the first interrupt specifies the key sense interrupt
and the second interrupt specifies the key stuck interrupt.
The format of the specifier is defined by the binding
document describing the node's interrupt parent.
- linux,keymap:
Usage: required
Value type: <prop-encoded-array>
Definition: the linux keymap. More information can be found in
input/matrix-keymap.txt.
- linux,keypad-no-autorepeat:
Usage: optional
Value type: <bool>
Definition: don't enable autorepeat feature.
- linux,keypad-wakeup:
Usage: optional
Value type: <bool>
Definition: use any event on keypad as wakeup event.
- keypad,num-rows:
Usage: required
Value type: <u32>
Definition: number of rows in the keymap. More information can be found
in input/matrix-keymap.txt.
- keypad,num-columns:
Usage: required
Value type: <u32>
Definition: number of columns in the keymap. More information can be
found in input/matrix-keymap.txt.
- debounce:
Usage: optional
Value type: <u32>
Definition: time in microseconds that key must be pressed or release
for key sense interrupt to trigger.
- scan-delay:
Usage: optional
Value type: <u32>
Definition: time in microseconds to pause between successive scans
of the matrix array.
- row-hold:
Usage: optional
Value type: <u32>
Definition: time in nanoseconds to pause between scans of each row in
the matrix array.
EXAMPLE
keypad@148 {
compatible = "qcom,pm8921-keypad";
reg = <0x148>;
interrupt-parent = <&pmicintc>;
interrupts = <74 1>, <75 1>;
linux,keymap = <
MATRIX_KEY(0, 0, KEY_VOLUMEUP)
MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
MATRIX_KEY(0, 3, KEY_CAMERA)
>;
keypad,num-rows = <1>;
keypad,num-columns = <5>;
debounce = <15>;
scan-delay = <32>;
row-hold = <91500>;
};