| /* |
| * Copyright 2013 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "imx6sl-pinfunc.h" |
| #include <dt-bindings/clock/imx6sl-clock.h> |
| |
| / { |
| aliases { |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| intc: interrupt-controller@00a01000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-controller; |
| reg = <0x00a01000 0x1000>, |
| <0x00a00100 0x100>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil { |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| osc { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&intc>; |
| ranges; |
| |
| L2: l2-cache@00a02000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x00a02000 0x1000>; |
| interrupts = <0 92 0x04>; |
| cache-unified; |
| cache-level = <2>; |
| arm,tag-latency = <4 2 3>; |
| arm,data-latency = <4 2 3>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <0 94 0x04>; |
| }; |
| |
| aips1: aips-bus@02000000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x02000000 0x100000>; |
| ranges; |
| |
| spba: spba-bus@02000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x02000000 0x40000>; |
| ranges; |
| |
| spdif: spdif@02004000 { |
| reg = <0x02004000 0x4000>; |
| interrupts = <0 52 0x04>; |
| }; |
| |
| ecspi1: ecspi@02008000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x02008000 0x4000>; |
| interrupts = <0 31 0x04>; |
| clocks = <&clks IMX6SL_CLK_ECSPI1>, |
| <&clks IMX6SL_CLK_ECSPI1>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi2: ecspi@0200c000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x0200c000 0x4000>; |
| interrupts = <0 32 0x04>; |
| clocks = <&clks IMX6SL_CLK_ECSPI2>, |
| <&clks IMX6SL_CLK_ECSPI2>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi3: ecspi@02010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x02010000 0x4000>; |
| interrupts = <0 33 0x04>; |
| clocks = <&clks IMX6SL_CLK_ECSPI3>, |
| <&clks IMX6SL_CLK_ECSPI3>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi4: ecspi@02014000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x02014000 0x4000>; |
| interrupts = <0 34 0x04>; |
| clocks = <&clks IMX6SL_CLK_ECSPI4>, |
| <&clks IMX6SL_CLK_ECSPI4>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@02018000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; |
| reg = <0x02018000 0x4000>; |
| interrupts = <0 30 0x04>; |
| clocks = <&clks IMX6SL_CLK_UART>, |
| <&clks IMX6SL_CLK_UART_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@02020000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; |
| reg = <0x02020000 0x4000>; |
| interrupts = <0 26 0x04>; |
| clocks = <&clks IMX6SL_CLK_UART>, |
| <&clks IMX6SL_CLK_UART_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@02024000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; |
| reg = <0x02024000 0x4000>; |
| interrupts = <0 27 0x04>; |
| clocks = <&clks IMX6SL_CLK_UART>, |
| <&clks IMX6SL_CLK_UART_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@02028000 { |
| compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; |
| reg = <0x02028000 0x4000>; |
| interrupts = <0 46 0x04>; |
| clocks = <&clks IMX6SL_CLK_SSI1>; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@0202c000 { |
| compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; |
| reg = <0x0202c000 0x4000>; |
| interrupts = <0 47 0x04>; |
| clocks = <&clks IMX6SL_CLK_SSI2>; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@02030000 { |
| compatible = "fsl,imx6sl-ssi","fsl,imx21-ssi"; |
| reg = <0x02030000 0x4000>; |
| interrupts = <0 48 0x04>; |
| clocks = <&clks IMX6SL_CLK_SSI3>; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@02034000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; |
| reg = <0x02034000 0x4000>; |
| interrupts = <0 28 0x04>; |
| clocks = <&clks IMX6SL_CLK_UART>, |
| <&clks IMX6SL_CLK_UART_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@02038000 { |
| compatible = "fsl,imx6sl-uart", "fsl,imx21-uart"; |
| reg = <0x02038000 0x4000>; |
| interrupts = <0 29 0x04>; |
| clocks = <&clks IMX6SL_CLK_UART>, |
| <&clks IMX6SL_CLK_UART_SERIAL>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| }; |
| |
| pwm1: pwm@02080000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| reg = <0x02080000 0x4000>; |
| interrupts = <0 83 0x04>; |
| clocks = <&clks IMX6SL_CLK_PWM1>, |
| <&clks IMX6SL_CLK_PWM1>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| pwm2: pwm@02084000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| reg = <0x02084000 0x4000>; |
| interrupts = <0 84 0x04>; |
| clocks = <&clks IMX6SL_CLK_PWM2>, |
| <&clks IMX6SL_CLK_PWM2>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| pwm3: pwm@02088000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| reg = <0x02088000 0x4000>; |
| interrupts = <0 85 0x04>; |
| clocks = <&clks IMX6SL_CLK_PWM3>, |
| <&clks IMX6SL_CLK_PWM3>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| pwm4: pwm@0208c000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; |
| reg = <0x0208c000 0x4000>; |
| interrupts = <0 86 0x04>; |
| clocks = <&clks IMX6SL_CLK_PWM4>, |
| <&clks IMX6SL_CLK_PWM4>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| gpt: gpt@02098000 { |
| compatible = "fsl,imx6sl-gpt"; |
| reg = <0x02098000 0x4000>; |
| interrupts = <0 55 0x04>; |
| clocks = <&clks IMX6SL_CLK_GPT>, |
| <&clks IMX6SL_CLK_GPT_SERIAL>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| gpio1: gpio@0209c000 { |
| compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| reg = <0x0209c000 0x4000>; |
| interrupts = <0 66 0x04 0 67 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@020a0000 { |
| compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| reg = <0x020a0000 0x4000>; |
| interrupts = <0 68 0x04 0 69 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@020a4000 { |
| compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| reg = <0x020a4000 0x4000>; |
| interrupts = <0 70 0x04 0 71 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@020a8000 { |
| compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| reg = <0x020a8000 0x4000>; |
| interrupts = <0 72 0x04 0 73 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio5: gpio@020ac000 { |
| compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio"; |
| reg = <0x020ac000 0x4000>; |
| interrupts = <0 74 0x04 0 75 0x04>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| kpp: kpp@020b8000 { |
| reg = <0x020b8000 0x4000>; |
| interrupts = <0 82 0x04>; |
| }; |
| |
| wdog1: wdog@020bc000 { |
| compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; |
| reg = <0x020bc000 0x4000>; |
| interrupts = <0 80 0x04>; |
| clocks = <&clks IMX6SL_CLK_DUMMY>; |
| }; |
| |
| wdog2: wdog@020c0000 { |
| compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; |
| reg = <0x020c0000 0x4000>; |
| interrupts = <0 81 0x04>; |
| clocks = <&clks IMX6SL_CLK_DUMMY>; |
| status = "disabled"; |
| }; |
| |
| clks: ccm@020c4000 { |
| compatible = "fsl,imx6sl-ccm"; |
| reg = <0x020c4000 0x4000>; |
| interrupts = <0 87 0x04 0 88 0x04>; |
| #clock-cells = <1>; |
| }; |
| |
| anatop: anatop@020c8000 { |
| compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus"; |
| reg = <0x020c8000 0x1000>; |
| interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; |
| |
| regulator-1p1@110 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vdd1p1"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1375000>; |
| regulator-always-on; |
| anatop-reg-offset = <0x110>; |
| anatop-vol-bit-shift = <8>; |
| anatop-vol-bit-width = <5>; |
| anatop-min-bit-val = <4>; |
| anatop-min-voltage = <800000>; |
| anatop-max-voltage = <1375000>; |
| }; |
| |
| regulator-3p0@120 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vdd3p0"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3150000>; |
| regulator-always-on; |
| anatop-reg-offset = <0x120>; |
| anatop-vol-bit-shift = <8>; |
| anatop-vol-bit-width = <5>; |
| anatop-min-bit-val = <0>; |
| anatop-min-voltage = <2625000>; |
| anatop-max-voltage = <3400000>; |
| }; |
| |
| regulator-2p5@130 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vdd2p5"; |
| regulator-min-microvolt = <2100000>; |
| regulator-max-microvolt = <2850000>; |
| regulator-always-on; |
| anatop-reg-offset = <0x130>; |
| anatop-vol-bit-shift = <8>; |
| anatop-vol-bit-width = <5>; |
| anatop-min-bit-val = <0>; |
| anatop-min-voltage = <2100000>; |
| anatop-max-voltage = <2850000>; |
| }; |
| |
| reg_arm: regulator-vddcore@140 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "cpu"; |
| regulator-min-microvolt = <725000>; |
| regulator-max-microvolt = <1450000>; |
| regulator-always-on; |
| anatop-reg-offset = <0x140>; |
| anatop-vol-bit-shift = <0>; |
| anatop-vol-bit-width = <5>; |
| anatop-delay-reg-offset = <0x170>; |
| anatop-delay-bit-shift = <24>; |
| anatop-delay-bit-width = <2>; |
| anatop-min-bit-val = <1>; |
| anatop-min-voltage = <725000>; |
| anatop-max-voltage = <1450000>; |
| }; |
| |
| reg_pu: regulator-vddpu@140 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vddpu"; |
| regulator-min-microvolt = <725000>; |
| regulator-max-microvolt = <1450000>; |
| regulator-always-on; |
| anatop-reg-offset = <0x140>; |
| anatop-vol-bit-shift = <9>; |
| anatop-vol-bit-width = <5>; |
| anatop-delay-reg-offset = <0x170>; |
| anatop-delay-bit-shift = <26>; |
| anatop-delay-bit-width = <2>; |
| anatop-min-bit-val = <1>; |
| anatop-min-voltage = <725000>; |
| anatop-max-voltage = <1450000>; |
| }; |
| |
| reg_soc: regulator-vddsoc@140 { |
| compatible = "fsl,anatop-regulator"; |
| regulator-name = "vddsoc"; |
| regulator-min-microvolt = <725000>; |
| regulator-max-microvolt = <1450000>; |
| regulator-always-on; |
| anatop-reg-offset = <0x140>; |
| anatop-vol-bit-shift = <18>; |
| anatop-vol-bit-width = <5>; |
| anatop-delay-reg-offset = <0x170>; |
| anatop-delay-bit-shift = <28>; |
| anatop-delay-bit-width = <2>; |
| anatop-min-bit-val = <1>; |
| anatop-min-voltage = <725000>; |
| anatop-max-voltage = <1450000>; |
| }; |
| }; |
| |
| usbphy1: usbphy@020c9000 { |
| compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; |
| reg = <0x020c9000 0x1000>; |
| interrupts = <0 44 0x04>; |
| clocks = <&clks IMX6SL_CLK_USBPHY1>; |
| }; |
| |
| usbphy2: usbphy@020ca000 { |
| compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy"; |
| reg = <0x020ca000 0x1000>; |
| interrupts = <0 45 0x04>; |
| clocks = <&clks IMX6SL_CLK_USBPHY2>; |
| }; |
| |
| snvs@020cc000 { |
| compatible = "fsl,sec-v4.0-mon", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x020cc000 0x4000>; |
| |
| snvs-rtc-lp@34 { |
| compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
| reg = <0x34 0x58>; |
| interrupts = <0 19 0x04 0 20 0x04>; |
| }; |
| }; |
| |
| epit1: epit@020d0000 { |
| reg = <0x020d0000 0x4000>; |
| interrupts = <0 56 0x04>; |
| }; |
| |
| epit2: epit@020d4000 { |
| reg = <0x020d4000 0x4000>; |
| interrupts = <0 57 0x04>; |
| }; |
| |
| src: src@020d8000 { |
| compatible = "fsl,imx6sl-src", "fsl,imx51-src"; |
| reg = <0x020d8000 0x4000>; |
| interrupts = <0 91 0x04 0 96 0x04>; |
| #reset-cells = <1>; |
| }; |
| |
| gpc: gpc@020dc000 { |
| compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc"; |
| reg = <0x020dc000 0x4000>; |
| interrupts = <0 89 0x04>; |
| }; |
| |
| iomuxc: iomuxc@020e0000 { |
| compatible = "fsl,imx6sl-iomuxc"; |
| reg = <0x020e0000 0x4000>; |
| |
| fec { |
| pinctrl_fec_1: fecgrp-1 { |
| fsl,pins = < |
| MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0 |
| MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0 |
| MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0 |
| MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0 |
| MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0 |
| MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0 |
| MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0 |
| MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0 |
| MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 |
| >; |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1_1: uart1grp-1 { |
| fsl,pins = < |
| MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 |
| MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 |
| >; |
| }; |
| }; |
| |
| usdhc1 { |
| pinctrl_usdhc1_1: usdhc1grp-1 { |
| fsl,pins = < |
| MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059 |
| MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059 |
| MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059 |
| MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059 |
| MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059 |
| MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059 |
| MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059 |
| MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059 |
| MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059 |
| MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059 |
| >; |
| }; |
| }; |
| |
| usdhc2 { |
| pinctrl_usdhc2_1: usdhc2grp-1 { |
| fsl,pins = < |
| MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 |
| MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059 |
| MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 |
| MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 |
| MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 |
| MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 |
| >; |
| }; |
| }; |
| |
| usdhc3 { |
| pinctrl_usdhc3_1: usdhc3grp-1 { |
| fsl,pins = < |
| MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| >; |
| }; |
| }; |
| }; |
| |
| csi: csi@020e4000 { |
| reg = <0x020e4000 0x4000>; |
| interrupts = <0 7 0x04>; |
| }; |
| |
| spdc: spdc@020e8000 { |
| reg = <0x020e8000 0x4000>; |
| interrupts = <0 6 0x04>; |
| }; |
| |
| sdma: sdma@020ec000 { |
| compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma"; |
| reg = <0x020ec000 0x4000>; |
| interrupts = <0 2 0x04>; |
| clocks = <&clks IMX6SL_CLK_SDMA>, |
| <&clks IMX6SL_CLK_SDMA>; |
| clock-names = "ipg", "ahb"; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6sl.bin"; |
| }; |
| |
| pxp: pxp@020f0000 { |
| reg = <0x020f0000 0x4000>; |
| interrupts = <0 98 0x04>; |
| }; |
| |
| epdc: epdc@020f4000 { |
| reg = <0x020f4000 0x4000>; |
| interrupts = <0 97 0x04>; |
| }; |
| |
| lcdif: lcdif@020f8000 { |
| reg = <0x020f8000 0x4000>; |
| interrupts = <0 39 0x04>; |
| }; |
| |
| dcp: dcp@020fc000 { |
| reg = <0x020fc000 0x4000>; |
| interrupts = <0 99 0x04>; |
| }; |
| }; |
| |
| aips2: aips-bus@02100000 { |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x02100000 0x100000>; |
| ranges; |
| |
| usbotg1: usb@02184000 { |
| compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; |
| reg = <0x02184000 0x200>; |
| interrupts = <0 43 0x04>; |
| clocks = <&clks IMX6SL_CLK_USBOH3>; |
| fsl,usbphy = <&usbphy1>; |
| fsl,usbmisc = <&usbmisc 0>; |
| status = "disabled"; |
| }; |
| |
| usbotg2: usb@02184200 { |
| compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; |
| reg = <0x02184200 0x200>; |
| interrupts = <0 40 0x04>; |
| clocks = <&clks IMX6SL_CLK_USBOH3>; |
| fsl,usbphy = <&usbphy2>; |
| fsl,usbmisc = <&usbmisc 1>; |
| status = "disabled"; |
| }; |
| |
| usbh: usb@02184400 { |
| compatible = "fsl,imx6sl-usb", "fsl,imx27-usb"; |
| reg = <0x02184400 0x200>; |
| interrupts = <0 42 0x04>; |
| clocks = <&clks IMX6SL_CLK_USBOH3>; |
| fsl,usbmisc = <&usbmisc 2>; |
| status = "disabled"; |
| }; |
| |
| usbmisc: usbmisc@02184800 { |
| #index-cells = <1>; |
| compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x02184800 0x200>; |
| clocks = <&clks IMX6SL_CLK_USBOH3>; |
| }; |
| |
| fec: ethernet@02188000 { |
| compatible = "fsl,imx6sl-fec", "fsl,imx25-fec"; |
| reg = <0x02188000 0x4000>; |
| interrupts = <0 114 0x04>; |
| clocks = <&clks IMX6SL_CLK_ENET_REF>, |
| <&clks IMX6SL_CLK_ENET_REF>; |
| clock-names = "ipg", "ahb"; |
| status = "disabled"; |
| }; |
| |
| usdhc1: usdhc@02190000 { |
| compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; |
| reg = <0x02190000 0x4000>; |
| interrupts = <0 22 0x04>; |
| clocks = <&clks IMX6SL_CLK_USDHC1>, |
| <&clks IMX6SL_CLK_USDHC1>, |
| <&clks IMX6SL_CLK_USDHC1>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: usdhc@02194000 { |
| compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; |
| reg = <0x02194000 0x4000>; |
| interrupts = <0 23 0x04>; |
| clocks = <&clks IMX6SL_CLK_USDHC2>, |
| <&clks IMX6SL_CLK_USDHC2>, |
| <&clks IMX6SL_CLK_USDHC2>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc3: usdhc@02198000 { |
| compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; |
| reg = <0x02198000 0x4000>; |
| interrupts = <0 24 0x04>; |
| clocks = <&clks IMX6SL_CLK_USDHC3>, |
| <&clks IMX6SL_CLK_USDHC3>, |
| <&clks IMX6SL_CLK_USDHC3>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| usdhc4: usdhc@0219c000 { |
| compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; |
| reg = <0x0219c000 0x4000>; |
| interrupts = <0 25 0x04>; |
| clocks = <&clks IMX6SL_CLK_USDHC4>, |
| <&clks IMX6SL_CLK_USDHC4>, |
| <&clks IMX6SL_CLK_USDHC4>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@021a0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; |
| reg = <0x021a0000 0x4000>; |
| interrupts = <0 36 0x04>; |
| clocks = <&clks IMX6SL_CLK_I2C1>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@021a4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; |
| reg = <0x021a4000 0x4000>; |
| interrupts = <0 37 0x04>; |
| clocks = <&clks IMX6SL_CLK_I2C2>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@021a8000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c"; |
| reg = <0x021a8000 0x4000>; |
| interrupts = <0 38 0x04>; |
| clocks = <&clks IMX6SL_CLK_I2C3>; |
| status = "disabled"; |
| }; |
| |
| mmdc: mmdc@021b0000 { |
| compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc"; |
| reg = <0x021b0000 0x4000>; |
| }; |
| |
| rngb: rngb@021b4000 { |
| reg = <0x021b4000 0x4000>; |
| interrupts = <0 5 0x04>; |
| }; |
| |
| weim: weim@021b8000 { |
| reg = <0x021b8000 0x4000>; |
| interrupts = <0 14 0x04>; |
| }; |
| |
| ocotp: ocotp@021bc000 { |
| compatible = "fsl,imx6sl-ocotp"; |
| reg = <0x021bc000 0x4000>; |
| }; |
| |
| audmux: audmux@021d8000 { |
| compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux"; |
| reg = <0x021d8000 0x4000>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
