mtd: Fix endianness issues from device tree
This patch adds the appropriate conversions to correct the endianness
issues in the MTD driver whenever it accesses the device tree (which is
always big endian).
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index fe63f6b..ec4011c 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -50,7 +50,7 @@
{
int i, plen, nr_parts;
const struct {
- u32 offset, len;
+ __be32 offset, len;
} *part;
const char *names;
@@ -69,9 +69,9 @@
names = of_get_property(dp, "partition-names", &plen);
for (i = 0; i < nr_parts; i++) {
- info->parts[i].offset = part->offset;
- info->parts[i].size = part->len & ~1;
- if (part->len & 1) /* bit 0 set signifies read only partition */
+ info->parts[i].offset = be32_to_cpu(part->offset);
+ info->parts[i].size = be32_to_cpu(part->len) & ~1;
+ if (be32_to_cpu(part->len) & 1) /* bit 0 set signifies read only partition */
info->parts[i].mask_flags = MTD_WRITEABLE;
if (names && (plen > 0)) {
@@ -226,11 +226,11 @@
struct resource res;
struct of_flash *info;
const char *probe_type = match->data;
- const u32 *width;
+ const __be32 *width;
int err;
int i;
int count;
- const u32 *p;
+ const __be32 *p;
int reg_tuple_size;
struct mtd_info **mtd_list = NULL;
resource_size_t res_size;
@@ -294,7 +294,7 @@
info->list[i].map.name = dev_name(&dev->dev);
info->list[i].map.phys = res.start;
info->list[i].map.size = res_size;
- info->list[i].map.bankwidth = *width;
+ info->list[i].map.bankwidth = be32_to_cpup(width);
err = -ENOMEM;
info->list[i].map.virt = ioremap(info->list[i].map.phys,
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index c8ab156..efdcca9 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -222,7 +222,7 @@
{
struct fsl_upm_nand *fun;
struct resource io_res;
- const uint32_t *prop;
+ const __be32 *prop;
int rnb_gpio;
int ret;
int size;
@@ -270,7 +270,7 @@
goto err1;
}
for (i = 0; i < fun->mchip_count; i++)
- fun->mchip_offsets[i] = prop[i];
+ fun->mchip_offsets[i] = be32_to_cpu(prop[i]);
} else {
fun->mchip_count = 1;
}
@@ -295,13 +295,13 @@
prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
if (prop)
- fun->chip_delay = *prop;
+ fun->chip_delay = be32_to_cpup(prop);
else
fun->chip_delay = 50;
prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
if (prop && size == sizeof(uint32_t))
- fun->wait_flags = *prop;
+ fun->wait_flags = be32_to_cpup(prop);
else
fun->wait_flags = FSL_UPM_WAIT_RUN_PATTERN |
FSL_UPM_WAIT_WRITE_BYTE;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index f4610bc..469e649 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -663,7 +663,7 @@
#endif
struct nand_chip *chip;
unsigned long regs_paddr, regs_size;
- const uint *chips_no;
+ const __be32 *chips_no;
int resettime = 0;
int retval = 0;
int rev, len;
@@ -806,7 +806,7 @@
}
/* Detect NAND chips */
- if (nand_scan(mtd, *chips_no)) {
+ if (nand_scan(mtd, be32_to_cpup(chips_no))) {
dev_err(dev, "NAND Flash not found !\n");
devm_free_irq(dev, prv->irq, mtd);
retval = -ENXIO;
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 510554e..c9ae0a5 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -229,7 +229,7 @@
const struct of_device_id *match)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
- const u32 *reg;
+ const __be32 *reg;
u32 ccr;
int err, len;
@@ -244,7 +244,7 @@
dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);
return -ENOENT;
}
- ndfc->chip_select = reg[0];
+ ndfc->chip_select = be32_to_cpu(reg[0]);
ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0);
if (!ndfc->ndfcbase) {
@@ -257,7 +257,7 @@
/* It is ok if ccr does not exist - just default to 0 */
reg = of_get_property(ofdev->dev.of_node, "ccr", NULL);
if (reg)
- ccr |= *reg;
+ ccr |= be32_to_cpup(reg);
out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
@@ -265,7 +265,7 @@
reg = of_get_property(ofdev->dev.of_node, "bank-settings", NULL);
if (reg) {
int offset = NDFC_BCFG0 + (ndfc->chip_select << 2);
- out_be32(ndfc->ndfcbase + offset, *reg);
+ out_be32(ndfc->ndfcbase + offset, be32_to_cpup(reg));
}
err = ndfc_chip_init(ndfc, ofdev->dev.of_node);
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 8bf7dc6..a996718 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -44,7 +44,7 @@
pp = NULL;
i = 0;
while ((pp = of_get_next_child(node, pp))) {
- const u32 *reg;
+ const __be32 *reg;
int len;
reg = of_get_property(pp, "reg", &len);
@@ -53,8 +53,8 @@
continue;
}
- (*pparts)[i].offset = reg[0];
- (*pparts)[i].size = reg[1];
+ (*pparts)[i].offset = be32_to_cpu(reg[0]);
+ (*pparts)[i].size = be32_to_cpu(reg[1]);
partname = of_get_property(pp, "label", &len);
if (!partname)
