| /* |
| * ACPI 3.0 based NUMA setup |
| * Copyright 2004 Andi Kleen, SuSE Labs. |
| * |
| * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. |
| * |
| * Called from acpi_numa_init while reading the SRAT and SLIT tables. |
| * Assumes all memory regions belonging to a single proximity domain |
| * are in one chunk. Holes between them will be included in the node. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/acpi.h> |
| #include <linux/mmzone.h> |
| #include <linux/bitmap.h> |
| #include <linux/module.h> |
| #include <linux/topology.h> |
| #include <linux/bootmem.h> |
| #include <linux/memblock.h> |
| #include <linux/mm.h> |
| #include <asm/proto.h> |
| #include <asm/numa.h> |
| #include <asm/e820.h> |
| #include <asm/apic.h> |
| #include <asm/uv/uv.h> |
| |
| int acpi_numa __initdata; |
| |
| static __init int setup_node(int pxm) |
| { |
| return acpi_map_pxm_to_node(pxm); |
| } |
| |
| static __init void bad_srat(void) |
| { |
| printk(KERN_ERR "SRAT: SRAT not used.\n"); |
| acpi_numa = -1; |
| } |
| |
| static __init inline int srat_disabled(void) |
| { |
| return acpi_numa < 0; |
| } |
| |
| /* Callback for SLIT parsing */ |
| void __init acpi_numa_slit_init(struct acpi_table_slit *slit) |
| { |
| int i, j; |
| |
| for (i = 0; i < slit->locality_count; i++) |
| for (j = 0; j < slit->locality_count; j++) |
| numa_set_distance(pxm_to_node(i), pxm_to_node(j), |
| slit->entry[slit->locality_count * i + j]); |
| } |
| |
| /* Callback for Proximity Domain -> x2APIC mapping */ |
| void __init |
| acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) |
| { |
| int pxm, node; |
| int apic_id; |
| |
| if (srat_disabled()) |
| return; |
| if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) { |
| bad_srat(); |
| return; |
| } |
| if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) |
| return; |
| pxm = pa->proximity_domain; |
| apic_id = pa->apic_id; |
| if (!cpu_has_x2apic && (apic_id >= 0xff)) { |
| printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n", |
| pxm, apic_id); |
| return; |
| } |
| node = setup_node(pxm); |
| if (node < 0) { |
| printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); |
| bad_srat(); |
| return; |
| } |
| |
| if (apic_id >= MAX_LOCAL_APIC) { |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); |
| return; |
| } |
| set_apicid_to_node(apic_id, node); |
| node_set(node, numa_nodes_parsed); |
| acpi_numa = 1; |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", |
| pxm, apic_id, node); |
| } |
| |
| /* Callback for Proximity Domain -> LAPIC mapping */ |
| void __init |
| acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) |
| { |
| int pxm, node; |
| int apic_id; |
| |
| if (srat_disabled()) |
| return; |
| if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) { |
| bad_srat(); |
| return; |
| } |
| if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) |
| return; |
| pxm = pa->proximity_domain_lo; |
| node = setup_node(pxm); |
| if (node < 0) { |
| printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); |
| bad_srat(); |
| return; |
| } |
| |
| if (get_uv_system_type() >= UV_X2APIC) |
| apic_id = (pa->apic_id << 8) | pa->local_sapic_eid; |
| else |
| apic_id = pa->apic_id; |
| |
| if (apic_id >= MAX_LOCAL_APIC) { |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); |
| return; |
| } |
| |
| set_apicid_to_node(apic_id, node); |
| node_set(node, numa_nodes_parsed); |
| acpi_numa = 1; |
| printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", |
| pxm, apic_id, node); |
| } |
| |
| #ifdef CONFIG_MEMORY_HOTPLUG |
| static inline int save_add_info(void) {return 1;} |
| #else |
| static inline int save_add_info(void) {return 0;} |
| #endif |
| |
| /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */ |
| void __init |
| acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma) |
| { |
| u64 start, end; |
| int node, pxm; |
| |
| if (srat_disabled()) |
| return; |
| if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) { |
| bad_srat(); |
| return; |
| } |
| if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0) |
| return; |
| |
| if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info()) |
| return; |
| start = ma->base_address; |
| end = start + ma->length; |
| pxm = ma->proximity_domain; |
| node = setup_node(pxm); |
| if (node < 0) { |
| printk(KERN_ERR "SRAT: Too many proximity domains.\n"); |
| bad_srat(); |
| return; |
| } |
| |
| if (numa_add_memblk(node, start, end) < 0) { |
| bad_srat(); |
| return; |
| } |
| |
| printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm, |
| start, end); |
| } |
| |
| void __init acpi_numa_arch_fixup(void) {} |
| |
| int __init x86_acpi_numa_init(void) |
| { |
| int ret; |
| |
| ret = acpi_numa_init(); |
| if (ret < 0) |
| return ret; |
| return srat_disabled() ? -EINVAL : 0; |
| } |