| /* |
| * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the BSD-type |
| * license below: |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * Neither the name of the Network Appliance, Inc. nor the names of |
| * its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written |
| * permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Author: Tom Tucker <tom@opengridcomputing.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/sysctl.h> |
| #include <linux/sunrpc/clnt.h> |
| #include <linux/sunrpc/sched.h> |
| #include <linux/sunrpc/svc_rdma.h> |
| |
| #define RPCDBG_FACILITY RPCDBG_SVCXPRT |
| |
| /* RPC/RDMA parameters */ |
| unsigned int svcrdma_ord = RPCRDMA_ORD; |
| static unsigned int min_ord = 1; |
| static unsigned int max_ord = 4096; |
| unsigned int svcrdma_max_requests = RPCRDMA_MAX_REQUESTS; |
| static unsigned int min_max_requests = 4; |
| static unsigned int max_max_requests = 16384; |
| unsigned int svcrdma_max_req_size = RPCRDMA_MAX_REQ_SIZE; |
| static unsigned int min_max_inline = 4096; |
| static unsigned int max_max_inline = 65536; |
| |
| atomic_t rdma_stat_recv; |
| atomic_t rdma_stat_read; |
| atomic_t rdma_stat_write; |
| atomic_t rdma_stat_sq_starve; |
| atomic_t rdma_stat_rq_starve; |
| atomic_t rdma_stat_rq_poll; |
| atomic_t rdma_stat_rq_prod; |
| atomic_t rdma_stat_sq_poll; |
| atomic_t rdma_stat_sq_prod; |
| |
| /* |
| * This function implements reading and resetting an atomic_t stat |
| * variable through read/write to a proc file. Any write to the file |
| * resets the associated statistic to zero. Any read returns it's |
| * current value. |
| */ |
| static int read_reset_stat(ctl_table *table, int write, |
| struct file *filp, void __user *buffer, size_t *lenp, |
| loff_t *ppos) |
| { |
| atomic_t *stat = (atomic_t *)table->data; |
| |
| if (!stat) |
| return -EINVAL; |
| |
| if (write) |
| atomic_set(stat, 0); |
| else { |
| char str_buf[32]; |
| char *data; |
| int len = snprintf(str_buf, 32, "%d\n", atomic_read(stat)); |
| if (len >= 32) |
| return -EFAULT; |
| len = strlen(str_buf); |
| if (*ppos > len) { |
| *lenp = 0; |
| return 0; |
| } |
| data = &str_buf[*ppos]; |
| len -= *ppos; |
| if (len > *lenp) |
| len = *lenp; |
| if (len && copy_to_user(buffer, str_buf, len)) |
| return -EFAULT; |
| *lenp = len; |
| *ppos += len; |
| } |
| return 0; |
| } |
| |
| static struct ctl_table_header *svcrdma_table_header; |
| static ctl_table svcrdma_parm_table[] = { |
| { |
| .procname = "max_requests", |
| .data = &svcrdma_max_requests, |
| .maxlen = sizeof(unsigned int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &min_max_requests, |
| .extra2 = &max_max_requests |
| }, |
| { |
| .procname = "max_req_size", |
| .data = &svcrdma_max_req_size, |
| .maxlen = sizeof(unsigned int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &min_max_inline, |
| .extra2 = &max_max_inline |
| }, |
| { |
| .procname = "max_outbound_read_requests", |
| .data = &svcrdma_ord, |
| .maxlen = sizeof(unsigned int), |
| .mode = 0644, |
| .proc_handler = &proc_dointvec_minmax, |
| .strategy = &sysctl_intvec, |
| .extra1 = &min_ord, |
| .extra2 = &max_ord, |
| }, |
| |
| { |
| .procname = "rdma_stat_read", |
| .data = &rdma_stat_read, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_recv", |
| .data = &rdma_stat_recv, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_write", |
| .data = &rdma_stat_write, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_sq_starve", |
| .data = &rdma_stat_sq_starve, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_rq_starve", |
| .data = &rdma_stat_rq_starve, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_rq_poll", |
| .data = &rdma_stat_rq_poll, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_rq_prod", |
| .data = &rdma_stat_rq_prod, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_sq_poll", |
| .data = &rdma_stat_sq_poll, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .procname = "rdma_stat_sq_prod", |
| .data = &rdma_stat_sq_prod, |
| .maxlen = sizeof(atomic_t), |
| .mode = 0644, |
| .proc_handler = &read_reset_stat, |
| }, |
| { |
| .ctl_name = 0, |
| }, |
| }; |
| |
| static ctl_table svcrdma_table[] = { |
| { |
| .procname = "svc_rdma", |
| .mode = 0555, |
| .child = svcrdma_parm_table |
| }, |
| { |
| .ctl_name = 0, |
| }, |
| }; |
| |
| static ctl_table svcrdma_root_table[] = { |
| { |
| .ctl_name = CTL_SUNRPC, |
| .procname = "sunrpc", |
| .mode = 0555, |
| .child = svcrdma_table |
| }, |
| { |
| .ctl_name = 0, |
| }, |
| }; |
| |
| void svc_rdma_cleanup(void) |
| { |
| dprintk("SVCRDMA Module Removed, deregister RPC RDMA transport\n"); |
| if (svcrdma_table_header) { |
| unregister_sysctl_table(svcrdma_table_header); |
| svcrdma_table_header = NULL; |
| } |
| svc_unreg_xprt_class(&svc_rdma_class); |
| } |
| |
| int svc_rdma_init(void) |
| { |
| dprintk("SVCRDMA Module Init, register RPC RDMA transport\n"); |
| dprintk("\tsvcrdma_ord : %d\n", svcrdma_ord); |
| dprintk("\tmax_requests : %d\n", svcrdma_max_requests); |
| dprintk("\tsq_depth : %d\n", |
| svcrdma_max_requests * RPCRDMA_SQ_DEPTH_MULT); |
| dprintk("\tmax_inline : %d\n", svcrdma_max_req_size); |
| if (!svcrdma_table_header) |
| svcrdma_table_header = |
| register_sysctl_table(svcrdma_root_table); |
| |
| /* Register RDMA with the SVC transport switch */ |
| svc_reg_xprt_class(&svc_rdma_class); |
| return 0; |
| } |
| MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>"); |
| MODULE_DESCRIPTION("SVC RDMA Transport"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| module_init(svc_rdma_init); |
| module_exit(svc_rdma_cleanup); |