sky2: fiber pause bits
The advertisement bits for flow control are located in
different location on fiber (1000baseX)
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2747e2f..88b12e8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -384,20 +384,31 @@
adv |= PHY_M_AN_10_FD;
if (sky2->advertising & ADVERTISED_10baseT_Half)
adv |= PHY_M_AN_10_HD;
+
+ /* desired flow control */
+ if (sky2->tx_pause && sky2->rx_pause) /* both */
+ adv |= PHY_M_AN_PC | PHY_M_AN_ASP;
+ else if (sky2->tx_pause)
+ adv |= PHY_M_AN_ASP;
+ else if (sky2->rx_pause)
+ adv |= PHY_M_AN_PC;
+
+
} else { /* special defines for FIBER (88E1040S only) */
if (sky2->advertising & ADVERTISED_1000baseT_Full)
adv |= PHY_M_AN_1000X_AFD;
if (sky2->advertising & ADVERTISED_1000baseT_Half)
adv |= PHY_M_AN_1000X_AHD;
- }
- /* Set Flow-control capabilities */
- if (sky2->tx_pause && sky2->rx_pause)
- adv |= PHY_AN_PAUSE_CAP; /* symmetric */
- else if (sky2->rx_pause && !sky2->tx_pause)
- adv |= PHY_AN_PAUSE_ASYM | PHY_AN_PAUSE_CAP;
- else if (!sky2->rx_pause && sky2->tx_pause)
- adv |= PHY_AN_PAUSE_ASYM; /* local */
+ if (sky2->tx_pause && sky2->rx_pause) /* both */
+ adv |= PHY_M_P_BOTH_MD_X;
+ else if (sky2->tx_pause)
+ adv |= PHY_M_P_ASYM_MD_X;
+ else if (sky2->rx_pause)
+ adv |= PHY_M_P_SYM_MD_X;
+ else
+ adv |= PHY_M_P_NO_PAUSE_X;
+ }
/* Restart Auto-negotiation */
ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
