diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index f9717fe..215e3b8 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -62,7 +62,7 @@
 
 static struct pxa2xx_spi_master pxa_nssp_master_info = {
 	.ssp_type = PXA25x_NSSP, /* Type of SSP */
-	.clock_enable = CKEN9_NSSP, /* NSSP Peripheral clock */
+	.clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */
 	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
 	.enable_dma = 1, /* Enables NSSP DMA */
 };
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index b8cb79f..64b08b7 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -164,9 +164,9 @@
 	local_irq_save(flags);
 
 	if (enable)
-		CKEN |= clock;
+		CKEN |= (1 << clock);
 	else
-		CKEN &= ~clock;
+		CKEN &= ~(1 << clock);
 
 	local_irq_restore(flags);
 }
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 8e27a64..e309766 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -234,7 +234,7 @@
 {
 	if (on) {
 		pxa_gpio_mode(GPIO16_PWM0_MD);
-		pxa_set_cken(CKEN0_PWM0, 1);
+		pxa_set_cken(CKEN_PWM0, 1);
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x3ff;
 		PWM_PERVAL0 = 0x3ff;
@@ -242,7 +242,7 @@
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x0;
 		PWM_PERVAL0 = 0x3FF;
-		pxa_set_cken(CKEN0_PWM0, 0);
+		pxa_set_cken(CKEN_PWM0, 0);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 055de7f..6377b2e 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -220,7 +220,7 @@
 
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
 	.ssp_type	= PXA25x_SSP,
-	.clock_enable	= CKEN3_SSP,
+	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 0,
 };
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 56d94d8..ed99a81 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -266,7 +266,7 @@
 {
 	if (on) {
 		pxa_gpio_mode(GPIO16_PWM0_MD);
-		pxa_set_cken(CKEN0_PWM0, 1);
+		pxa_set_cken(CKEN_PWM0, 1);
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x3ff;
 		PWM_PERVAL0 = 0x3ff;
@@ -274,7 +274,7 @@
 		PWM_CTRL0 = 0;
 		PWM_PWDUTY0 = 0x0;
 		PWM_PERVAL0 = 0x3FF;
-		pxa_set_cken(CKEN0_PWM0, 0);
+		pxa_set_cken(CKEN_PWM0, 0);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 74eeada..c64bab4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -140,9 +140,9 @@
 	extern void pxa_cpu_resume(void);
 
 	if (state == PM_SUSPEND_STANDBY)
-		CKEN = CKEN22_MEMC | CKEN9_OSTIMER | CKEN16_LCD |CKEN0_PWM0;
+		CKEN = CKEN_MEMC | CKEN_OSTIMER | CKEN_LCD | CKEN_PWM0;
 	else
-		CKEN = CKEN22_MEMC | CKEN9_OSTIMER;
+		CKEN = CKEN_MEMC | CKEN_OSTIMER;
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 6cc2027..71766ac 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -52,13 +52,13 @@
  */
 static const struct ssp_info_ ssp_info[PXA_SSP_PORTS] = {
 #if defined (CONFIG_PXA27x)
-	{IRQ_SSP,	CKEN23_SSP1},
-	{IRQ_SSP2,	CKEN3_SSP2},
-	{IRQ_SSP3,	CKEN4_SSP3},
+	{IRQ_SSP,	CKEN_SSP1},
+	{IRQ_SSP2,	CKEN_SSP2},
+	{IRQ_SSP3,	CKEN_SSP3},
 #else
-	{IRQ_SSP,	CKEN3_SSP},
-	{IRQ_NSSP,	CKEN9_NSSP},
-	{IRQ_ASSP,	CKEN10_ASSP},
+	{IRQ_SSP,	CKEN_SSP},
+	{IRQ_NSSP,	CKEN_NSSP},
+	{IRQ_ASSP,	CKEN_ASSP},
 #endif
 };
 
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 11c7477..4443d3b 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -887,14 +887,14 @@
 		pxa_gpio_mode(GPIO117_I2CSCL_MD);
 		pxa_gpio_mode(GPIO118_I2CSDA_MD);
 #endif
-		pxa_set_cken(CKEN14_I2C, 1);
+		pxa_set_cken(CKEN_I2C, 1);
 		break;
 #ifdef CONFIG_PXA27x
 	case 1:
 		local_irq_disable();
 		PCFR |= PCFR_PI2CEN;
 		local_irq_enable();
-		pxa_set_cken(CKEN15_PWRI2C, 1);
+		pxa_set_cken(CKEN_PWRI2C, 1);
 #endif
 	}
 
@@ -935,11 +935,11 @@
 ereqirq:
 	switch (dev->id) {
 	case 0:
-		pxa_set_cken(CKEN14_I2C, 0);
+		pxa_set_cken(CKEN_I2C, 0);
 		break;
 #ifdef CONFIG_PXA27x
 	case 1:
-		pxa_set_cken(CKEN15_PWRI2C, 0);
+		pxa_set_cken(CKEN_PWRI2C, 0);
 		local_irq_disable();
 		PCFR &= ~PCFR_PI2CEN;
 		local_irq_enable();
@@ -962,11 +962,11 @@
 	free_irq(i2c->irq, i2c);
 	switch (dev->id) {
 	case 0:
-		pxa_set_cken(CKEN14_I2C, 0);
+		pxa_set_cken(CKEN_I2C, 0);
 		break;
 #ifdef CONFIG_PXA27x
 	case 1:
-		pxa_set_cken(CKEN15_PWRI2C, 0);
+		pxa_set_cken(CKEN_PWRI2C, 0);
 		local_irq_disable();
 		PCFR &= ~PCFR_PI2CEN;
 		local_irq_enable();
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index 9774fc6..fca894e5 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -369,14 +369,14 @@
 		if (CLOCKRATE / clk > ios->clock)
 			clk <<= 1;
 		host->clkrt = fls(clk) - 1;
-		pxa_set_cken(CKEN12_MMC, 1);
+		pxa_set_cken(CKEN_MMC, 1);
 
 		/*
 		 * we write clkrt on the next command
 		 */
 	} else {
 		pxamci_stop_clock(host);
-		pxa_set_cken(CKEN12_MMC, 0);
+		pxa_set_cken(CKEN_MMC, 0);
 	}
 
 	if (host->power_mode != ios->power_mode) {
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 2272156..d6d5361 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -134,7 +134,7 @@
 			DCSR(si->rxdma) &= ~DCSR_RUN;
 			/* disable FICP */
 			ICCR0 = 0;
-			pxa_set_cken(CKEN13_FICP, 0);
+			pxa_set_cken(CKEN_FICP, 0);
 
 			/* set board transceiver to SIR mode */
 			si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
@@ -144,7 +144,7 @@
 			pxa_gpio_mode(GPIO47_STTXD_MD);
 
 			/* enable the STUART clock */
-			pxa_set_cken(CKEN5_STUART, 1);
+			pxa_set_cken(CKEN_STUART, 1);
 		}
 
 		/* disable STUART first */
@@ -169,7 +169,7 @@
 		/* disable STUART */
 		STIER = 0;
 		STISR = 0;
-		pxa_set_cken(CKEN5_STUART, 0);
+		pxa_set_cken(CKEN_STUART, 0);
 
 		/* disable FICP first */
 		ICCR0 = 0;
@@ -182,7 +182,7 @@
 		pxa_gpio_mode(GPIO47_ICPTXD_MD);
 
 		/* enable the FICP clock */
-		pxa_set_cken(CKEN13_FICP, 1);
+		pxa_set_cken(CKEN_FICP, 1);
 
 		si->speed = speed;
 		pxa_irda_fir_dma_rx_start(si);
@@ -593,7 +593,7 @@
 	/* disable STUART SIR mode */
 	STISR = 0;
 	/* disable the STUART clock */
-	pxa_set_cken(CKEN5_STUART, 0);
+	pxa_set_cken(CKEN_STUART, 0);
 
 	/* disable DMA */
 	DCSR(si->txdma) &= ~DCSR_RUN;
@@ -601,7 +601,7 @@
 	/* disable FICP */
 	ICCR0 = 0;
 	/* disable the FICP clock */
-	pxa_set_cken(CKEN13_FICP, 0);
+	pxa_set_cken(CKEN_FICP, 0);
 
 	DRCMR17 = 0;
 	DRCMR18 = 0;
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index d403aaa..e9c6cb3 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -717,7 +717,7 @@
 static struct uart_pxa_port serial_pxa_ports[] = {
      {	/* FFUART */
 	.name	= "FFUART",
-	.cken	= CKEN6_FFUART,
+	.cken	= CKEN_FFUART,
 	.port	= {
 		.type		= PORT_PXA,
 		.iotype		= UPIO_MEM,
@@ -731,7 +731,7 @@
 	},
   }, {	/* BTUART */
 	.name	= "BTUART",
-	.cken	= CKEN7_BTUART,
+	.cken	= CKEN_BTUART,
 	.port	= {
 		.type		= PORT_PXA,
 		.iotype		= UPIO_MEM,
@@ -745,7 +745,7 @@
 	},
   }, {	/* STUART */
 	.name	= "STUART",
-	.cken	= CKEN5_STUART,
+	.cken	= CKEN_STUART,
 	.port	= {
 		.type		= PORT_PXA,
 		.iotype		= UPIO_MEM,
@@ -759,7 +759,7 @@
 	},
   }, {  /* HWUART */
 	.name	= "HWUART",
-	.cken	= CKEN4_HWUART,
+	.cken	= CKEN_HWUART,
 	.port = {
 		.type		= PORT_PXA,
 		.iotype		= UPIO_MEM,
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index f01890d..018b0d6 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -1497,7 +1497,7 @@
 
 #ifdef	CONFIG_ARCH_PXA
         /* Disable clock for USB device */
-	pxa_set_cken(CKEN11_USB, 0);
+	pxa_set_cken(CKEN_USB, 0);
 #endif
 
 	ep0_idle (dev);
@@ -1543,7 +1543,7 @@
 
 #ifdef	CONFIG_ARCH_PXA
         /* Enable clock for USB device */
-	pxa_set_cken(CKEN11_USB, 1);
+	pxa_set_cken(CKEN_USB, 1);
 	udelay(5);
 #endif
 
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index f1563dc..23d2fe5 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -80,7 +80,7 @@
 
 	inf = dev->platform_data;
 
-	pxa_set_cken(CKEN10_USBHOST, 1);
+	pxa_set_cken(CKEN_USBHOST, 1);
 
 	UHCHR |= UHCHR_FHR;
 	udelay(11);
@@ -123,7 +123,7 @@
 	UHCCOMS |= 1;
 	udelay(10);
 
-	pxa_set_cken(CKEN10_USBHOST, 0);
+	pxa_set_cken(CKEN_USBHOST, 0);
 }
 
 
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index b4947c8..0b195f3 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -803,7 +803,7 @@
 	pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
 
 	/* enable LCD controller clock */
-	pxa_set_cken(CKEN16_LCD, 1);
+	pxa_set_cken(CKEN_LCD, 1);
 
 	/* Sequence from 11.7.10 */
 	LCCR3 = fbi->reg_lccr3;
@@ -840,7 +840,7 @@
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
 
 	/* disable LCD controller clock */
-	pxa_set_cken(CKEN16_LCD, 0);
+	pxa_set_cken(CKEN_LCD, 0);
 }
 
 /*
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 139c9d9..dbcc929 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1801,35 +1801,35 @@
 #define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
 #define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */
 
-#define CKEN24_CAMERA	(1 << 24)	/* Camera Interface Clock Enable */
-#define CKEN23_SSP1	(1 << 23)	/* SSP1 Unit Clock Enable */
-#define CKEN22_MEMC	(1 << 22)	/* Memory Controller Clock Enable */
-#define CKEN21_MEMSTK	(1 << 21)	/* Memory Stick Host Controller */
-#define CKEN20_IM	(1 << 20)	/* Internal Memory Clock Enable */
-#define CKEN19_KEYPAD	(1 << 19)	/* Keypad Interface Clock Enable */
-#define CKEN18_USIM	(1 << 18)	/* USIM Unit Clock Enable */
-#define CKEN17_MSL	(1 << 17)	/* MSL Unit Clock Enable */
-#define CKEN16_LCD	(1 << 16)	/* LCD Unit Clock Enable */
-#define CKEN15_PWRI2C	(1 << 15)	/* PWR I2C Unit Clock Enable */
-#define CKEN14_I2C	(1 << 14)	/* I2C Unit Clock Enable */
-#define CKEN13_FICP	(1 << 13)	/* FICP Unit Clock Enable */
-#define CKEN12_MMC	(1 << 12)	/* MMC Unit Clock Enable */
-#define CKEN11_USB	(1 << 11)	/* USB Unit Clock Enable */
-#define CKEN10_ASSP	(1 << 10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN10_USBHOST	(1 << 10)	/* USB Host Unit Clock Enable */
-#define CKEN9_OSTIMER	(1 << 9)	/* OS Timer Unit Clock Enable */
-#define CKEN9_NSSP	(1 << 9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN8_I2S	(1 << 8)	/* I2S Unit Clock Enable */
-#define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
-#define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
-#define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
-#define CKEN4_HWUART	(1 << 4)	/* HWUART Unit Clock Enable */
-#define CKEN4_SSP3	(1 << 4)	/* SSP3 Unit Clock Enable */
-#define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
-#define CKEN3_SSP2	(1 << 3)	/* SSP2 Unit Clock Enable */
-#define CKEN2_AC97	(1 << 2)	/* AC97 Unit Clock Enable */
-#define CKEN1_PWM1	(1 << 1)	/* PWM1 Clock Enable */
-#define CKEN0_PWM0	(1 << 0)	/* PWM0 Clock Enable */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
 
 #define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
 #define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 28db4be..19c65a8 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -260,7 +260,7 @@
 	if (platform_ops && platform_ops->suspend)
 		platform_ops->suspend(platform_ops->priv);
 	GCR |= GCR_ACLINK_OFF;
-	pxa_set_cken(CKEN2_AC97, 0);
+	pxa_set_cken(CKEN_AC97, 0);
 
 	return 0;
 }
@@ -269,7 +269,7 @@
 {
 	pxa2xx_audio_ops_t *platform_ops = card->dev->platform_data;
 
-	pxa_set_cken(CKEN2_AC97, 1);
+	pxa_set_cken(CKEN_AC97, 1);
 	if (platform_ops && platform_ops->resume)
 		platform_ops->resume(platform_ops->priv);
 	snd_ac97_resume(pxa2xx_ac97_ac97);
@@ -337,7 +337,7 @@
 	/* Use GPIO 113 as AC97 Reset on Bulverde */
 	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
 #endif
-	pxa_set_cken(CKEN2_AC97, 1);
+	pxa_set_cken(CKEN_AC97, 1);
 
 	ret = snd_ac97_bus(card, 0, &pxa2xx_ac97_ops, NULL, &ac97_bus);
 	if (ret)
@@ -361,10 +361,10 @@
  err:
 	if (card)
 		snd_card_free(card);
-	if (CKEN & CKEN2_AC97) {
+	if (CKEN & CKEN_AC97) {
 		GCR |= GCR_ACLINK_OFF;
 		free_irq(IRQ_AC97, NULL);
-		pxa_set_cken(CKEN2_AC97, 0);
+		pxa_set_cken(CKEN_AC97, 0);
 	}
 	return ret;
 }
@@ -378,7 +378,7 @@
 		platform_set_drvdata(dev, NULL);
 		GCR |= GCR_ACLINK_OFF;
 		free_irq(IRQ_AC97, NULL);
-		pxa_set_cken(CKEN2_AC97, 0);
+		pxa_set_cken(CKEN_AC97, 0);
 	}
 
 	return 0;
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 1bbbeff..b222755 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -256,7 +256,7 @@
 	struct snd_soc_cpu_dai *dai)
 {
 	GCR |= GCR_ACLINK_OFF;
-	pxa_set_cken(CKEN2_AC97, 0);
+	pxa_set_cken(CKEN_AC97, 0);
 	return 0;
 }
 
@@ -271,7 +271,7 @@
 	/* Use GPIO 113 as AC97 Reset on Bulverde */
 	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
 #endif
-	pxa_set_cken(CKEN2_AC97, 1);
+	pxa_set_cken(CKEN_AC97, 1);
 	return 0;
 }
 
@@ -296,14 +296,14 @@
 	/* Use GPIO 113 as AC97 Reset on Bulverde */
 	pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
 #endif
-	pxa_set_cken(CKEN2_AC97, 1);
+	pxa_set_cken(CKEN_AC97, 1);
 	return 0;
 
  err:
-	if (CKEN & CKEN2_AC97) {
+	if (CKEN & CKEN_AC97) {
 		GCR |= GCR_ACLINK_OFF;
 		free_irq(IRQ_AC97, NULL);
-		pxa_set_cken(CKEN2_AC97, 0);
+		pxa_set_cken(CKEN_AC97, 0);
 	}
 	return ret;
 }
@@ -312,7 +312,7 @@
 {
 	GCR |= GCR_ACLINK_OFF;
 	free_irq(IRQ_AC97, NULL);
-	pxa_set_cken(CKEN2_AC97, 0);
+	pxa_set_cken(CKEN_AC97, 0);
 }
 
 static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 575a613..50c5c83 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -149,7 +149,7 @@
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
-	pxa_set_cken(CKEN8_I2S, 1);
+	pxa_set_cken(CKEN_I2S, 1);
 	pxa_i2s_wait();
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -234,7 +234,7 @@
 	if (SACR1 & (SACR1_DREC | SACR1_DRPL)) {
 		SACR0 &= ~SACR0_ENB;
 		pxa_i2s_wait();
-		pxa_set_cken(CKEN8_I2S, 0);
+		pxa_set_cken(CKEN_I2S, 0);
 	}
 }