[PATCH] /proc/<pid>/numa_maps to show on which nodes pages reside
This patch was recently discussed on linux-mm:
http://marc.theaimsgroup.com/?t=112085728500002&r=1&w=2
I inherited a large code base from Ray for page migration. There was a
small patch in there that I find to be very useful since it allows the
display of the locality of the pages in use by a process. I reworked that
patch and came up with a /proc/<pid>/numa_maps that gives more information
about the vma's of a process. numa_maps is indexes by the start address
found in /proc/<pid>/maps. F.e. with this patch you can see the page use
of the "getty" process:
margin:/proc/12008 # cat maps
00000000-00004000 r--p 00000000 00:00 0
2000000000000000-200000000002c000 r-xp 00000000 08:04 516 /lib/ld-2.3.3.so
2000000000038000-2000000000040000 rw-p 00028000 08:04 516 /lib/ld-2.3.3.so
2000000000040000-2000000000044000 rw-p 2000000000040000 00:00 0
2000000000058000-2000000000260000 r-xp 00000000 08:04 54707842 /lib/tls/libc.so.6.1
2000000000260000-2000000000268000 ---p 00208000 08:04 54707842 /lib/tls/libc.so.6.1
2000000000268000-2000000000274000 rw-p 00200000 08:04 54707842 /lib/tls/libc.so.6.1
2000000000274000-2000000000280000 rw-p 2000000000274000 00:00 0
2000000000280000-20000000002b4000 r--p 00000000 08:04 9126923 /usr/lib/locale/en_US.utf8/LC_CTYPE
2000000000300000-2000000000308000 r--s 00000000 08:04 60071467 /usr/lib/gconv/gconv-modules.cache
2000000000318000-2000000000328000 rw-p 2000000000318000 00:00 0
4000000000000000-4000000000008000 r-xp 00000000 08:04 29576399 /sbin/mingetty
6000000000004000-6000000000008000 rw-p 00004000 08:04 29576399 /sbin/mingetty
6000000000008000-600000000002c000 rw-p 6000000000008000 00:00 0 [heap]
60000fff7fffc000-60000fff80000000 rw-p 60000fff7fffc000 00:00 0
60000ffffff44000-60000ffffff98000 rw-p 60000ffffff44000 00:00 0 [stack]
a000000000000000-a000000000020000 ---p 00000000 00:00 0 [vdso]
cat numa_maps
2000000000000000 default MaxRef=43 Pages=11 Mapped=11 N0=4 N1=3 N2=2 N3=2
2000000000038000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000040000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
2000000000058000 default MaxRef=43 Pages=61 Mapped=61 N0=14 N1=15 N2=16 N3=16
2000000000268000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000274000 default MaxRef=1 Pages=3 Mapped=3 Anon=3 N0=3
2000000000280000 default MaxRef=8 Pages=3 Mapped=3 N0=3
2000000000300000 default MaxRef=8 Pages=2 Mapped=2 N0=2
2000000000318000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N2=1
4000000000000000 default MaxRef=6 Pages=2 Mapped=2 N1=2
6000000000004000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
6000000000008000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000fff7fffc000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000ffffff44000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
getty uses ld.so. The first vma is the code segment which is used by 43
other processes and the pages are evenly distributed over the 4 nodes.
The second vma is the process specific data portion for ld.so. This is
only one page.
The display format is:
<startaddress> Links to information in /proc/<pid>/map
<memory policy> This can be "default" "interleave={}", "prefer=<node>" or "bind={<zones>}"
MaxRef= <maximum reference to a page in this vma>
Pages= <Nr of pages in use>
Mapped= <Nr of pages with mapcount >
Anon= <nr of anonymous pages>
Nx= <Nr of pages on Node x>
The content of the proc-file is self-evident. If this would be tied into
the sparsemem system then the contents of this file would not be too
useful.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 491f2d9..b796bf9 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -65,6 +65,7 @@
PROC_TGID_STAT,
PROC_TGID_STATM,
PROC_TGID_MAPS,
+ PROC_TGID_NUMA_MAPS,
PROC_TGID_MOUNTS,
PROC_TGID_WCHAN,
#ifdef CONFIG_SCHEDSTATS
@@ -102,6 +103,7 @@
PROC_TID_STAT,
PROC_TID_STATM,
PROC_TID_MAPS,
+ PROC_TID_NUMA_MAPS,
PROC_TID_MOUNTS,
PROC_TID_WCHAN,
#ifdef CONFIG_SCHEDSTATS
@@ -144,6 +146,9 @@
E(PROC_TGID_STAT, "stat", S_IFREG|S_IRUGO),
E(PROC_TGID_STATM, "statm", S_IFREG|S_IRUGO),
E(PROC_TGID_MAPS, "maps", S_IFREG|S_IRUGO),
+#ifdef CONFIG_NUMA
+ E(PROC_TGID_NUMA_MAPS, "numa_maps", S_IFREG|S_IRUGO),
+#endif
E(PROC_TGID_MEM, "mem", S_IFREG|S_IRUSR|S_IWUSR),
#ifdef CONFIG_SECCOMP
E(PROC_TGID_SECCOMP, "seccomp", S_IFREG|S_IRUSR|S_IWUSR),
@@ -180,6 +185,9 @@
E(PROC_TID_STAT, "stat", S_IFREG|S_IRUGO),
E(PROC_TID_STATM, "statm", S_IFREG|S_IRUGO),
E(PROC_TID_MAPS, "maps", S_IFREG|S_IRUGO),
+#ifdef CONFIG_NUMA
+ E(PROC_TID_NUMA_MAPS, "numa_maps", S_IFREG|S_IRUGO),
+#endif
E(PROC_TID_MEM, "mem", S_IFREG|S_IRUSR|S_IWUSR),
#ifdef CONFIG_SECCOMP
E(PROC_TID_SECCOMP, "seccomp", S_IFREG|S_IRUSR|S_IWUSR),
@@ -515,6 +523,27 @@
.release = seq_release,
};
+#ifdef CONFIG_NUMA
+extern struct seq_operations proc_pid_numa_maps_op;
+static int numa_maps_open(struct inode *inode, struct file *file)
+{
+ struct task_struct *task = proc_task(inode);
+ int ret = seq_open(file, &proc_pid_numa_maps_op);
+ if (!ret) {
+ struct seq_file *m = file->private_data;
+ m->private = task;
+ }
+ return ret;
+}
+
+static struct file_operations proc_numa_maps_operations = {
+ .open = numa_maps_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+#endif
+
extern struct seq_operations mounts_op;
static int mounts_open(struct inode *inode, struct file *file)
{
@@ -1524,6 +1553,12 @@
case PROC_TGID_MAPS:
inode->i_fop = &proc_maps_operations;
break;
+#ifdef CONFIG_NUMA
+ case PROC_TID_NUMA_MAPS:
+ case PROC_TGID_NUMA_MAPS:
+ inode->i_fop = &proc_numa_maps_operations;
+ break;
+#endif
case PROC_TID_MEM:
case PROC_TGID_MEM:
inode->i_op = &proc_mem_inode_operations;
