Merge branches 'depends/irqdomain' and 'at91/base2+cleanup' into next/dt
These two branches are a dependency for the at91 device tree changes,
so we pull them in here. at91/base2+cleanup will get merged through
the arm-soc cleanup2 branch, while the irqdomain tree will be sent
by Grant before this one gets integrated.
Conflicts:
drivers/rtc/rtc-at91sam9.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
new file mode 100644
index 0000000..ec8b50c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress.txt
@@ -0,0 +1,146 @@
+ARM Versatile Express boards family
+-----------------------------------
+
+ARM's Versatile Express platform consists of a motherboard and one
+or more daughterboards (tiles). The motherboard provides a set of
+peripherals. Processor and RAM "live" on the tiles.
+
+The motherboard and each core tile should be described by a separate
+Device Tree source file, with the tile's description including
+the motherboard file using a /include/ directive. As the motherboard
+can be initialized in one of two different configurations ("memory
+maps"), care must be taken to include the correct one.
+
+Required properties in the root node:
+- compatible value:
+ compatible = "arm,vexpress,<model>", "arm,vexpress";
+ where <model> is the full tile model name (as used in the tile's
+ Technical Reference Manual), eg.:
+ - for Coretile Express A5x2 (V2P-CA5s):
+ compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+ - for Coretile Express A9x4 (V2P-CA9):
+ compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+ If a tile comes in several variants or can be used in more then one
+ configuration, the compatible value should be:
+ compatible = "arm,vexpress,<model>,<variant>", \
+ "arm,vexpress,<model>", "arm,vexpress";
+ eg:
+ - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
+ compatible = "arm,vexpress,v2p-ca15,tc1", \
+ "arm,vexpress,v2p-ca15", "arm,vexpress";
+ - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
+ compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
+ "arm,vexpress,v2f-2xv6", "arm,vexpress";
+
+Optional properties in the root node:
+- tile model name (use name from the tile's Technical Reference
+ Manual, eg. "V2P-CA5s")
+ model = "<model>";
+- tile's HBI number (unique ARM's board model ID, visible on the
+ PCB's silkscreen) in hexadecimal transcription:
+ arm,hbi = <0xhbi>
+ eg:
+ - for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
+ arm,hbi = <0x191>;
+ - Coretile Express A9x4 (V2P-CA9) HBI-0225:
+ arm,hbi = <0x225>;
+
+Top-level standard "cpus" node is required. It must contain a node
+with device_type = "cpu" property for every available core, eg.:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ };
+ };
+
+The motherboard description file provides a single "motherboard" node
+using 2 address cells corresponding to the Static Memory Bus used
+between the motherboard and the tile. The first cell defines the Chip
+Select (CS) line number, the second cell address offset within the CS.
+All interrupt lines between the motherboard and the tile are active
+high and are described using single cell.
+
+Optional properties of the "motherboard" node:
+- motherboard's memory map variant:
+ arm,v2m-memory-map = "<name>";
+ where name is one of:
+ - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
+ referred to as "ARM Cortex-A Series memory map":
+ arm,v2m-memory-map = "rs1";
+ When this property is missing, the motherboard is using the original
+ memory map (also known as the "Legacy memory map", primarily used
+ with the original CoreTile Express A9x4) with peripherals on CS7.
+
+Motherboard .dtsi files provide a set of labelled peripherals that
+can be used to obtain required phandle in the tile's "aliases" node:
+- UARTs, note that the numbers correspond to the physical connectors
+ on the motherboard's back panel:
+ v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
+- I2C controllers:
+ v2m_i2c_dvi and v2m_i2c_pcie
+- SP804 timers:
+ v2m_timer01 and v2m_timer23
+
+Current Linux implementation requires a "arm,v2m_timer" alias
+pointing at one of the motherboard's SP804 timers, if it is to be
+used as the system timer. This alias should be defined in the
+motherboard files.
+
+The tile description must define "ranges", "interrupt-map-mask" and
+"interrupt-map" properties to translate the motherboard's address
+and interrupt space into one used by the tile's processor.
+
+Abbreviated example:
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA5s";
+ arm,hbi = <0x225>;
+ compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ };
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c000100 0x100>;
+ };
+
+ motherboard {
+ /* CS0 is visible at 0x08000000 */
+ ranges = <0 0 0x08000000 0x04000000>;
+ interrupt-map-mask = <0 0 63>;
+ /* Active high IRQ 0 is connected to GIC's SPI0 */
+ interrupt-map = <0 0 0 &gic 0 0 4>;
+ };
+};
+
+/include/ "vexpress-v2m-rs1.dtsi"
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index a0ffac0..1bea46a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -510,17 +510,3 @@
convert to using pci_scan_root_bus() so they can supply a list of
bus resources when the bus is created.
Who: Bjorn Helgaas <bhelgaas@google.com>
-
-----------------------------
-
-What: The CAP9 SoC family will be removed
-When: 3.4
-Files: arch/arm/mach-at91/at91cap9.c
- arch/arm/mach-at91/at91cap9_devices.c
- arch/arm/mach-at91/include/mach/at91cap9.h
- arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- arch/arm/mach-at91/board-cap9adk.c
-Why: The code is not actively maintained and platforms are now hard to find.
-Who: Nicolas Ferre <nicolas.ferre@atmel.com>
- Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 57dd0f5..09a04b4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -269,7 +269,6 @@
F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
-M: Kyle McMartin <kyle@mcmartin.ca>
M: Thibaut Varene <T-Bone@parisc-linux.org>
W: http://wiki.parisc-linux.org/AD1889
L: linux-parisc@vger.kernel.org
@@ -3047,7 +3046,6 @@
F: include/linux/hwspinlock.h
HARMONY SOUND DRIVER
-M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/parisc/harmony.*
@@ -5009,9 +5007,8 @@
F: drivers/block/paride/
PARISC ARCHITECTURE
-M: Kyle McMartin <kyle@mcmartin.ca>
-M: Helge Deller <deller@gmx.de>
M: "James E.J. Bottomley" <jejb@parisc-linux.org>
+M: Helge Deller <deller@gmx.de>
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
Q: http://patchwork.kernel.org/project/linux-parisc/list/
@@ -5870,7 +5867,7 @@
F: drivers/mmc/host/sdhci-spear.c
SECURITY SUBSYSTEM
-M: James Morris <jmorris@namei.org>
+M: James Morris <james.l.morris@oracle.com>
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
W: http://security.wiki.kernel.org/
@@ -5883,7 +5880,7 @@
SELINUX SECURITY MODULE
M: Stephen Smalley <sds@tycho.nsa.gov>
-M: James Morris <jmorris@namei.org>
+M: James Morris <james.l.morris@oracle.com>
M: Eric Paris <eparis@parisplace.org>
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
diff --git a/Makefile b/Makefile
index 7c44b67..b61a963 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48aecc..92c9c79 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -324,7 +324,7 @@
select CLKDEV_LOOKUP
help
This enables support for systems based on the Atmel AT91RM9200,
- AT91SAM9 and AT91CAP9 processors.
+ AT91SAM9 processors.
config ARCH_BCMRING
bool "Broadcom BCMRING"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d..b895a2a 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -81,47 +81,14 @@
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
- config DEBUG_LL_UART_NONE
- bool "No low-level debugging UART"
- help
- Say Y here if your platform doesn't provide a UART option
- below. This relies on your platform choosing the right UART
- definition internally in order for low-level debugging to
- work.
-
- config DEBUG_ICEDCC
- bool "Kernel low-level debugging via EmbeddedICE DCC channel"
- help
- Say Y here if you want the debug print routines to direct
- their output to the EmbeddedICE macrocell's DCC channel using
- co-processor 14. This is known to work on the ARM9 style ICE
- channel and on the XScale with the PEEDI.
-
- Note that the system will appear to hang during boot if there
- is nothing connected to read from the DCC.
-
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+ bool "Kernel low-level debugging on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
- config DEBUG_FOOTBRIDGE_COM1
- bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the 8250 at PCI COM1.
-
- config DEBUG_DC21285_PORT
- bool "Kernel low-level debugging messages via footbridge serial port"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port in the DC21285 (Footbridge).
-
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_DC21285_PORT
+ bool "Kernel low-level debugging messages via footbridge serial port"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port in the DC21285 (Footbridge).
+
+ config DEBUG_FOOTBRIDGE_COM1
+ bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the 8250 at PCI COM1.
+
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -206,55 +187,6 @@
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
- config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 0 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 0. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 1 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 1. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 2 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 2. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_REALVIEW_STD_PORT
- bool "RealView Default UART"
- depends on ARCH_REALVIEW
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on RealView EB, PB11MP, PBA8
- and PBX platforms.
-
- config DEBUG_REALVIEW_PB1176_PORT
- bool "RealView PB1176 UART"
- depends on MACH_REALVIEW_PB1176
- help
- Say Y here if you want the debug print routines to direct
- their output to the standard serial port on the RealView
- PB1176 platform.
-
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
@@ -292,6 +224,74 @@
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_LL_UART_NONE
+ bool "No low-level debugging UART"
+ help
+ Say Y here if your platform doesn't provide a UART option
+ below. This relies on your platform choosing the right UART
+ definition internally in order for low-level debugging to
+ work.
+
+ config DEBUG_ICEDCC
+ bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the EmbeddedICE macrocell's DCC channel using
+ co-processor 14. This is known to work on the ARM9 style ICE
+ channel and on the XScale with the PEEDI.
+
+ Note that the system will appear to hang during boot if there
+ is nothing connected to read from the DCC.
+
endchoice
config EARLY_PRINTK
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
new file mode 100644
index 0000000..e64eb93
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -0,0 +1,37 @@
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x5.dtsi"
+/include/ "at91sam9x5cm.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G25-EK";
+ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@f801c000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
new file mode 100644
index 0000000..e91391f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -0,0 +1,172 @@
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ * AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9x5 family SoC";
+ compatible = "atmel,at91sam9x5";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <2>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ pit: timer@fffffe30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffe30 0xf>;
+ interrupts = <1 4>;
+ };
+
+ tcb0: timer@f8008000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf8008000 0x100>;
+ interrupts = <17 4>;
+ };
+
+ tcb1: timer@f800c000 {
+ compatible = "atmel,at91sam9x5-tcb";
+ reg = <0xf800c000 0x100>;
+ interrupts = <17 4>;
+ };
+
+ dma0: dma-controller@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <20 4>;
+ };
+
+ dma1: dma-controller@ffffee00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffee00 0x200>;
+ interrupts = <21 4>;
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <2 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <3 4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 4>;
+ status = "disabled";
+ };
+
+ usart0: serial@f801c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf801c000 0x200>;
+ interrupts = <5 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@f8020000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8020000 0x200>;
+ interrupts = <6 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@f8024000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8024000 0x200>;
+ interrupts = <7 4>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ macb0: ethernet@f802c000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xf802c000 0x100>;
+ interrupts = <24 4>;
+ status = "disabled";
+ };
+
+ macb1: ethernet@f8030000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xf8030000 0x100>;
+ interrupts = <27 4>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
new file mode 100644
index 0000000..4ab5a77
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -0,0 +1,14 @@
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ memory@20000000 {
+ reg = <0x20000000 0x8000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 63d7578..a1dd2ee 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -29,6 +29,7 @@
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
+ cpu-offset = <0x8000>;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 564cb8c..9949e60 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -56,8 +56,95 @@
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
- mc13xxx-irq-gpios = <&gpio1 8 0>;
- fsl,mc13xxx-uses-regulator;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+ };
};
flash: at45db321d@1 {
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index c3977e0..ce1c823 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -36,11 +36,13 @@
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
fsl,card-wired;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
@@ -50,6 +52,18 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
leds {
compatible = "gpio-leds";
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 08d920d..4663a4e 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -32,18 +32,52 @@
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
cd-gpios = <&gpio2 6 0>;
wp-gpios = <&gpio2 7 0>;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
uart2: uart@021e8000 {
status = "okay";
};
+
+ i2c@021a0000 { /* I2C1 */
+ status = "okay";
+ clock-frequency = <100000>;
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_2p5v: 2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 9486be6..9f72cd4 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -13,15 +13,6 @@
model = "TI OMAP3 BeagleBoard";
compatible = "ti,omap3-beagle", "ti,omap3";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
new file mode 100644
index 0000000..2eee16e
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
+ compatible = "ti,omap3-evm", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 216c331..e698064 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -67,28 +67,49 @@
#interrupt-cells = <1>;
};
- uart1: serial@0x4806a000 {
+ uart1: serial@4806a000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
- uart2: serial@0x4806c000 {
+ uart2: serial@4806c000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
- uart3: serial@0x49020000 {
+ uart3: serial@49020000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
- uart4: serial@0x49042000 {
+ uart4: serial@49042000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index c702657..9755ad5 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -13,15 +13,6 @@
model = "TI OMAP4 PandaBoard";
compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 066e28c..63c6b2b 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -13,15 +13,6 @@
model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index e8fe75f..3d35559 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -99,33 +99,61 @@
gic: interrupt-controller@48241000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
};
- uart1: serial@0x4806a000 {
+ uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
- uart2: serial@0x4806c000 {
+ uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
- uart3: serial@0x48020000 {
+ uart3: serial@48020000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
- uart4: serial@0x4806e000 {
+ uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+
+ i2c4: i2c@48350000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c4";
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 1a1d702..825d295 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -46,11 +46,11 @@
};
serial@70006200 {
- status = "disable";
+ clock-frequency = <216000000>;
};
serial@70006300 {
- clock-frequency = <216000000>;
+ status = "disable";
};
serial@70006400 {
@@ -60,7 +60,7 @@
sdhci@c8000000 {
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
new file mode 100644
index 0000000..16076e2
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,201 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+/ {
+ aliases {
+ arm,v2m_timer = &v2m_timer01;
+ };
+
+ motherboard {
+ compatible = "simple-bus";
+ arm,v2m-memory-map = "rs1";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ psram@1,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <1 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
+
+ vram@2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet@2,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ };
+
+ usb@2,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <2 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ sysreg@010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ };
+
+ sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ };
+
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@030000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x030000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
+
+ aaci@040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ };
+
+ mmci@050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ };
+
+ kmi@060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ };
+
+ kmi@070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ };
+
+ v2m_serial0: uart@090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ };
+
+ v2m_serial1: uart@0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ };
+
+ v2m_serial2: uart@0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ };
+
+ v2m_serial3: uart@0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ };
+
+ wdt@0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ };
+
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@160000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x160000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
+
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ };
+
+ compact-flash@1a0000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a0000 0x100
+ 0x1a0100 0xf00>;
+ reg-shift = <2>;
+ };
+
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupts = <14>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
new file mode 100644
index 0000000..a6c9c7c
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -0,0 +1,200 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+
+/ {
+ aliases {
+ arm,v2m_timer = &v2m_timer01;
+ };
+
+ motherboard {
+ compatible = "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <1 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ psram@2,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <2 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
+
+ vram@3,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <3 0x00000000 0x00800000>;
+ };
+
+ ethernet@3,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <3 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ };
+
+ usb@3,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <3 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
+
+ iofpga@7,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 7 0 0x20000>;
+
+ sysreg@00000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x00000 0x1000>;
+ };
+
+ sysctl@01000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x01000 0x1000>;
+ };
+
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@02000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x02000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
+
+ aaci@04000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x04000 0x1000>;
+ interrupts = <11>;
+ };
+
+ mmci@05000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x05000 0x1000>;
+ interrupts = <9 10>;
+ };
+
+ kmi@06000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x06000 0x1000>;
+ interrupts = <12>;
+ };
+
+ kmi@07000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x07000 0x1000>;
+ interrupts = <13>;
+ };
+
+ v2m_serial0: uart@09000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x09000 0x1000>;
+ interrupts = <5>;
+ };
+
+ v2m_serial1: uart@0a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a000 0x1000>;
+ interrupts = <6>;
+ };
+
+ v2m_serial2: uart@0b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b000 0x1000>;
+ interrupts = <7>;
+ };
+
+ v2m_serial3: uart@0c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c000 0x1000>;
+ interrupts = <8>;
+ };
+
+ wdt@0f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f000 0x1000>;
+ interrupts = <0>;
+ };
+
+ v2m_timer01: timer@11000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x11000 0x1000>;
+ interrupts = <2>;
+ };
+
+ v2m_timer23: timer@12000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ };
+
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@16000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x16000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
+
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
+ };
+
+ rtc@17000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x17000 0x1000>;
+ interrupts = <4>;
+ };
+
+ compact-flash@1a000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a000 0x100
+ 0x1a100 0xf00>;
+ reg-shift = <2>;
+ };
+
+ clcd@1f000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f000 0x1000>;
+ interrupts = <14>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
new file mode 100644
index 0000000..941b161
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -0,0 +1,157 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 (version with Test Chip 1)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ * HBI-0237A
+ */
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA15";
+ arm,hbi = <0x237>;
+ compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ hdlcd@2b000000 {
+ compatible = "arm,hdlcd";
+ reg = <0x2b000000 0x1000>;
+ interrupts = <0 85 4>;
+ };
+
+ memory-controller@2b0a0000 {
+ compatible = "arm,pl341", "arm,primecell";
+ reg = <0x2b0a0000 0x1000>;
+ };
+
+ wdt@2b060000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x2b060000 0x1000>;
+ interrupts = <98>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c002000 0x100>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0x7ffd0000 0x1000>;
+ interrupts = <0 86 4>,
+ <0 87 4>;
+ };
+
+ dma@7ffb0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x7ffb0000 0x1000>;
+ interrupts = <0 92 4>,
+ <0 88 4>,
+ <0 89 4>,
+ <0 90 4>,
+ <0 91 4>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+ interrupts = <0 68 4>,
+ <0 69 4>;
+ };
+
+ motherboard {
+ ranges = <0 0 0x08000000 0x04000000>,
+ <1 0 0x14000000 0x04000000>,
+ <2 0 0x18000000 0x04000000>,
+ <3 0 0x1c000000 0x04000000>,
+ <4 0 0x0c000000 0x04000000>,
+ <5 0 0x10000000 0x04000000>;
+
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+ };
+};
+
+/include/ "vexpress-v2m-rs1.dtsi"
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
new file mode 100644
index 0000000..6905e66d
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -0,0 +1,162 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA5s";
+ arm,hbi = <0x225>;
+ compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ hdlcd@2a110000 {
+ compatible = "arm,hdlcd";
+ reg = <0x2a110000 0x1000>;
+ interrupts = <0 85 4>;
+ };
+
+ memory-controller@2a150000 {
+ compatible = "arm,pl341", "arm,primecell";
+ reg = <0x2a150000 0x1000>;
+ };
+
+ memory-controller@2a190000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0x2a190000 0x1000>;
+ interrupts = <0 86 4>,
+ <0 87 4>;
+ };
+
+ scu@2c000000 {
+ compatible = "arm,cortex-a5-scu";
+ reg = <0x2c000000 0x58>;
+ };
+
+ timer@2c000600 {
+ compatible = "arm,cortex-a5-twd-timer";
+ reg = <0x2c000600 0x38>;
+ interrupts = <1 2 0x304>,
+ <1 3 0x304>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,corex-a5-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c000100 0x100>;
+ };
+
+ L2: cache-controller@2c0f0000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x2c0f0000 0x1000>;
+ interrupts = <0 84 4>;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu";
+ interrupts = <0 68 4>,
+ <0 69 4>;
+ };
+
+ motherboard {
+ ranges = <0 0 0x08000000 0x04000000>,
+ <1 0 0x14000000 0x04000000>,
+ <2 0 0x18000000 0x04000000>,
+ <3 0 0x1c000000 0x04000000>,
+ <4 0 0x0c000000 0x04000000>,
+ <5 0 0x10000000 0x04000000>;
+
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+ };
+};
+
+/include/ "vexpress-v2m-rs1.dtsi"
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
new file mode 100644
index 0000000..da77869
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -0,0 +1,192 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA9";
+ arm,hbi = <0x191>;
+ compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupts = <0 44 4>;
+ };
+
+ memory-controller@100e0000 {
+ compatible = "arm,pl341", "arm,primecell";
+ reg = <0x100e0000 0x1000>;
+ };
+
+ memory-controller@100e1000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0x100e1000 0x1000>;
+ interrupts = <0 45 4>,
+ <0 46 4>;
+ };
+
+ timer@100e4000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x100e4000 0x1000>;
+ interrupts = <0 48 4>,
+ <0 49 4>;
+ };
+
+ watchdog@100e5000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x100e5000 0x1000>;
+ interrupts = <0 51 4>;
+ };
+
+ scu@1e000000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1e000000 0x58>;
+ };
+
+ timer@1e000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1e000600 0x20>;
+ interrupts = <1 2 0xf04>,
+ <1 3 0xf04>;
+ };
+
+ gic: interrupt-controller@1e001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1e001000 0x1000>,
+ <0x1e000100 0x100>;
+ };
+
+ L2: cache-controller@1e00a000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x1e00a000 0x1000>;
+ interrupts = <0 43 4>;
+ cache-level = <2>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <1 1 1>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ motherboard {
+ ranges = <0 0 0x40000000 0x04000000>,
+ <1 0 0x44000000 0x04000000>,
+ <2 0 0x48000000 0x04000000>,
+ <3 0 0x4c000000 0x04000000>,
+ <7 0 0x10000000 0x00020000>;
+
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+ };
+};
+
+/include/ "vexpress-v2m.dtsi"
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index d1bcd7b..fb1f1cf 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -320,13 +320,6 @@
return -EBUSY;
}
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PCI bus master devices
*/
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index d8e44a4..ff3ad22 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1502,12 +1502,13 @@
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
- int ret = 0, active = thrd->req_running;
+ int ret = 0, active;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
pl330 = thrd->dmac;
+ active = thrd->req_running;
spin_lock_irqsave(&pl330->lock, flags);
diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig
deleted file mode 100644
index 8826eb2..0000000
--- a/arch/arm/configs/at91cap9_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91CAP9=y
-CONFIG_MACH_AT91CAP9ADK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 62f8095..23371b1 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -137,6 +137,11 @@
disable_irq
.endm
+ .macro save_and_disable_irqs_notrace, oldcpsr
+ mrs \oldcpsr, cpsr
+ disable_irq_notrace
+ .endm
+
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h
index c0f4e7b..d6030ff 100644
--- a/arch/arm/include/asm/hardware/arm_timer.h
+++ b/arch/arm/include/asm/hardware/arm_timer.h
@@ -9,7 +9,12 @@
*
* Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
* can have 16-bit or 32-bit selectable via a bit in the control register.
+ *
+ * Every SP804 contains two identical timers.
*/
+#define TIMER_1_BASE 0x00
+#define TIMER_2_BASE 0x20
+
#define TIMER_LOAD 0x00 /* ACVR rw */
#define TIMER_VALUE 0x04 /* ACVR ro */
#define TIMER_CTRL 0x08 /* ACVR rw */
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
index 575fa81..c182138 100644
--- a/arch/arm/include/asm/hardware/pl330.h
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -41,7 +41,7 @@
DCCTRL1, /* Bufferable only */
DCCTRL2, /* Cacheable, but do not allocate */
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
- DINVALID1 = 8,
+ DINVALID1, /* AWCACHE = 0x1000 */
DINVALID2,
DCCTRL6, /* Cacheable write-through, allocate on writes only */
DCCTRL7, /* Cacheable write-back, allocate on writes only */
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8..cb8d638 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
#include <asm/hw_breakpoint.h>
#include <asm/ptrace.h>
#include <asm/types.h>
+#include <asm/system.h>
#ifdef __KERNEL__
#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index e4c96cc..424aa45 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -110,6 +110,7 @@
void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 971d65c..008e7ce 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -61,8 +61,6 @@
static volatile int hlt_counter;
-#include <mach/system.h>
-
void disable_hlt(void)
{
hlt_counter++;
@@ -181,13 +179,17 @@
EXPORT_SYMBOL_GPL(cpu_idle_wait);
/*
- * This is our default idle handler. We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
*/
+
+void (*arm_pm_idle)(void);
+
static void default_idle(void)
{
- if (!need_resched())
- arch_idle();
+ if (arm_pm_idle)
+ arm_pm_idle();
+ else
+ cpu_do_idle();
local_irq_enable();
}
@@ -215,6 +217,10 @@
cpu_die();
#endif
+ /*
+ * We need to disable interrupts here
+ * to ensure we don't miss a wakeup call.
+ */
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
@@ -222,19 +228,18 @@
if (hlt_counter) {
local_irq_enable();
cpu_relax();
- } else {
+ } else if (!need_resched()) {
stop_critical_timings();
if (cpuidle_idle_call())
pm_idle();
start_critical_timings();
/*
- * This will eventually be removed - pm_idle
- * functions should always return with IRQs
- * enabled.
+ * pm_idle functions must always
+ * return with IRQs enabled.
*/
WARN_ON(irqs_disabled());
+ } else
local_irq_enable();
- }
}
leds_event(led_idle_end);
rcu_idle_exit();
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index e33870f..ede6443 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -23,6 +23,7 @@
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/regset.h>
+#include <linux/audit.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -904,6 +905,12 @@
return ret;
}
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
{
unsigned long ip;
@@ -918,7 +925,7 @@
if (!ip)
audit_syscall_exit(regs);
else
- audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+ audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
if (!test_thread_flag(TIF_SYSCALL_TRACE))
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 4285daa..7a79b24 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -129,7 +129,7 @@
static int twd_cpufreq_init(void)
{
- if (!IS_ERR(twd_clk))
+ if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
return cpufreq_register_notifier(&twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 71feb00..e55cdcb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -102,13 +102,13 @@
select HAVE_AT91_DBGU1
select AT91_SAM9G45_RESET
-config ARCH_AT91CAP9
- bool "AT91CAP9"
+config ARCH_AT91SAM9X5
+ bool "AT91SAM9x5 family"
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
+ select HAVE_AT91_DBGU0
select AT91_SAM9G45_RESET
config ARCH_AT91X40
@@ -447,21 +447,6 @@
# ----------------------------------------------------------
-if ARCH_AT91CAP9
-
-comment "AT91CAP9 Board Type"
-
-config MACH_AT91CAP9ADK
- bool "Atmel AT91CAP9A-DK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-
-endif
-
-# ----------------------------------------------------------
-
if ARCH_AT91X40
comment "AT91X40 Board Type"
@@ -544,7 +529,7 @@
depends on HAVE_AT91_DBGU0
config AT91_EARLY_DBGU1
- bool "DBGU on 9263, 9g45 and cap9"
+ bool "DBGU on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
config AT91_EARLY_USART0
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 705e1fb..1b65185 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -20,7 +20,7 @@
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -81,9 +81,6 @@
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
-# AT91CAP9 board-specific support
-obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 8ddafad..0da66ca 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,11 +3,7 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
-ifeq ($(CONFIG_ARCH_AT91CAP9),y)
- zreladdr-y += 0x70008000
-params_phys-y := 0x70000100
-initrd_phys-y := 0x70410000
-else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
zreladdr-y += 0x70008000
params_phys-y := 0x70000100
initrd_phys-y := 0x70410000
@@ -17,4 +13,10 @@
initrd_phys-y := 0x20410000
endif
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb
+# Keep dtb files sorted alphabetically for each SoC
+# sam9g20
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
+# sam9g45
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
+# sam9x5
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
deleted file mode 100644
index a42edc2..0000000
--- a/arch/arm/mach-at91/at91cap9.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91_pmc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioABCD_clk = {
- .name = "pioABCD_clk",
- .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb0_clk = {
- .name = "mpb0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb1_clk = {
- .name = "mpb1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb2_clk = {
- .name = "mpb2_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb3_clk = {
- .name = "mpb3_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb4_clk = {
- .name = "mpb4_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MPB4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91CAP9_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
- .name = "can_clk",
- .pmc_mask = 1 << AT91CAP9_ID_CAN,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91CAP9_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91CAP9_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
- .name = "ac97_clk",
- .pmc_mask = 1 << AT91CAP9_ID_AC97C,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
- .name = "tcb_clk",
- .pmc_mask = 1 << AT91CAP9_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91CAP9_ID_PWMC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91CAP9_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk aestdes_clk = {
- .name = "aestdes_clk",
- .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91CAP9_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91CAP9_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91CAP9_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91CAP9_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91CAP9_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioABCD_clk,
- &mpb0_clk,
- &mpb1_clk,
- &mpb2_clk,
- &mpb3_clk,
- &mpb4_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc0_clk,
- &mmc1_clk,
- &can_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ac97_clk,
- &tcb_clk,
- &pwm_clk,
- &macb_clk,
- &aestdes_clk,
- &adc_clk,
- &isi_clk,
- &lcdc_clk,
- &dma_clk,
- &udphs_clk,
- &ohci_clk,
- // irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioABCD_clk),
- CLKDEV_CON_ID("pioB", &pioABCD_clk),
- CLKDEV_CON_ID("pioC", &pioABCD_clk),
- CLKDEV_CON_ID("pioD", &pioABCD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91cap9_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91cap9_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
- {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOA,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOB,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOC,
- }, {
- .id = AT91CAP9_ID_PIOABCD,
- .regbase = AT91CAP9_BASE_PIOD,
- }
-};
-
-/* --------------------------------------------------------------------
- * AT91CAP9 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91cap9_map_io(void)
-{
- at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
-}
-
-static void __init at91cap9_ioremap_registers(void)
-{
- at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
- at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
- at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
-}
-
-static void __init at91cap9_initialize(void)
-{
- arm_pm_restart = at91sam9g45_restart;
- at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91cap9_gpio, 4);
-
- /* Remember the silicon revision */
- if (cpu_is_at91cap9_revB())
- system_rev = 0xB;
- else if (cpu_is_at91cap9_revC())
- system_rev = 0xC;
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A, B, C and D */
- 0, /* MP Block Peripheral 0 */
- 0, /* MP Block Peripheral 1 */
- 0, /* MP Block Peripheral 2 */
- 0, /* MP Block Peripheral 3 */
- 0, /* MP Block Peripheral 4 */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
- 3, /* CAN */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0, /* Advanced Encryption Standard, Triple DES*/
- 0, /* Analog-to-Digital Converter */
- 0, /* Image Sensor Interface */
- 3, /* LCD Controller */
- 0, /* DMA Controller */
- 2, /* USB Device Port */
- 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-};
-
-struct at91_init_soc __initdata at91cap9_soc = {
- .map_io = at91cap9_map_io,
- .default_irq_priority = at91cap9_default_irq_priority,
- .ioremap_registers = at91cap9_ioremap_registers,
- .register_clocks = at91cap9_register_clocks,
- .init = at91cap9_initialize,
-};
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
deleted file mode 100644
index d298fb7..0000000
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9_devices.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91CAP9_UHP_BASE,
- .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_UHP,
- .end = AT91CAP9_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- if (cpu_is_at91cap9_revB())
- irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
-
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->vbus_pin[i]))
- at91_set_gpio_output(data->vbus_pin[i], 0);
- }
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91CAP9_UDPHS_FIFO,
- .end = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_BASE_UDPHS,
- .end = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = AT91CAP9_ID_UDPHS,
- .end = AT91CAP9_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
-static struct usba_ep_data usba_udc_ep[] = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 3, 1, 1),
- EP("ep2", 2, 1024, 3, 1, 1),
- EP("ep3", 3, 1024, 2, 1, 1),
- EP("ep4", 4, 1024, 2, 1, 1),
- EP("ep5", 5, 1024, 2, 1, 0),
- EP("ep6", 6, 1024, 2, 1, 0),
- EP("ep7", 7, 1024, 2, 0, 0),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[8];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
- if (cpu_is_at91cap9_revB()) {
- irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
- at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
- AT91_MATRIX_UDPHS_BYPASS_LOCK);
- }
- else
- at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-
- /*
- * Invalid pins are 0 on AT91, but the usba driver is shared
- * with AVR32, which use negative values instead. Once/if
- * gpio_is_valid() is ported to AT91, revisit this code.
- */
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
- if (data && gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_EMAC,
- .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_EMAC,
- .end = AT91CAP9_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91cap9_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_MCI0,
- .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_MCI0,
- .end = AT91CAP9_ID_MCI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_mmc0_device = {
- .name = "at91_mci",
- .id = 0,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc0_data,
- },
- .resource = mmc0_resources,
- .num_resources = ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_MCI1,
- .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_MCI1,
- .end = AT91CAP9_ID_MCI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_mmc1_device = {
- .name = "at91_mci",
- .id = 1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc1_data,
- },
- .resource = mmc1_resources,
- .num_resources = ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (gpio_is_valid(data->wp_pin))
- at91_set_gpio_input(data->wp_pin, 1);
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
-
- if (mmc_id == 0) { /* MCI0 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- }
-
- mmc0_data = *data;
- platform_device_register(&at91cap9_mmc0_device);
- } else { /* MCI1 */
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA16, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA17, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA18, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA19, 1);
- at91_set_A_periph(AT91_PIN_PA20, 1);
- at91_set_A_periph(AT91_PIN_PA21, 1);
- }
-
- mmc1_data = *data;
- platform_device_register(&at91cap9_mmc1_device);
- }
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_BASE_ECC,
- .end = AT91CAP9_BASE_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91cap9_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PB4,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB5,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_TWI,
- .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_TWI,
- .end = AT91CAP9_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91cap9_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SPI0,
- .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SPI0,
- .end = AT91CAP9_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SPI1,
- .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SPI1,
- .end = AT91CAP9_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at91cap9_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91cap9_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_TCB0,
- .end = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_TCB,
- .end = AT91CAP9_ID_TCB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91cap9_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91CAP9_BASE_RTT,
- .end = AT91CAP9_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
- platform_device_register(&at91cap9_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91CAP9_BASE_WDT,
- .end = AT91CAP9_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91cap9_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91cap9_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_PWMC,
- .end = AT91CAP9_BASE_PWMC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_PWMC,
- .end = AT91CAP9_ID_PWMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_pwm0_device = {
- .name = "atmel_pwm",
- .id = -1,
- .dev = {
- .platform_data = &pwm_mask,
- },
- .resource = pwm_resources,
- .num_resources = ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
- if (mask & (1 << AT91_PWM0))
- at91_set_A_periph(AT91_PIN_PB19, 1); /* enable PWM0 */
-
- if (mask & (1 << AT91_PWM1))
- at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
-
- if (mask & (1 << AT91_PWM2))
- at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
-
- if (mask & (1 << AT91_PWM3))
- at91_set_B_periph(AT91_PIN_PA11, 1); /* enable PWM3 */
-
- pwm_mask = mask;
-
- platform_device_register(&at91cap9_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-
-/* --------------------------------------------------------------------
- * AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_AC97C,
- .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_AC97C,
- .end = AT91CAP9_ID_AC97C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ac97_device = {
- .name = "atmel_ac97c",
- .id = 1,
- .dev = {
- .dma_mask = &ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
- .num_resources = ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
- at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
-
- /* reset */
- if (gpio_is_valid(data->reset_pin))
- at91_set_gpio_output(data->reset_pin, 0);
-
- ac97_data = *data;
- platform_device_register(&at91cap9_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91CAP9_LCDC_BASE,
- .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_LCDC,
- .end = AT91CAP9_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
- if (!data)
- return;
-
- if (cpu_is_at91cap9_revB())
- irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
-
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SSC0,
- .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SSC0,
- .end = AT91CAP9_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ssc0_device = {
- .name = "ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB0, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB1, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB2, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB3, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB4, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_SSC1,
- .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_SSC1,
- .end = AT91CAP9_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91cap9_ssc1_device = {
- .name = "ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB6, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB7, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB8, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB9, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB10, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91CAP9_ID_SSC0:
- pdev = &at91cap9_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91CAP9_ID_SSC1:
- pdev = &at91cap9_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_DBGU,
- .end = AT91CAP9_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US0,
- .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US0,
- .end = AT91CAP9_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US1,
- .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US1,
- .end = AT91CAP9_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91CAP9_BASE_US2,
- .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91CAP9_ID_US2,
- .end = AT91CAP9_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91cap9_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91CAP9_ID_US0:
- pdev = &at91cap9_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91CAP9_ID_US1:
- pdev = &at91cap9_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91CAP9_ID_US2:
- pdev = &at91cap9_uart2_device;
- configure_usart2_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91cap9_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 99c3174..0df1045 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -289,13 +289,22 @@
}
};
+static void at91rm9200_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
static void at91rm9200_restart(char mode, const char *cmd)
{
/*
* Perform a hardware reset with the use of the Watchdog timer.
*/
- at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
- at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+ at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+ at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
}
/* --------------------------------------------------------------------
@@ -310,10 +319,13 @@
static void __init at91rm9200_ioremap_registers(void)
{
+ at91rm9200_ioremap_st(AT91RM9200_BASE_ST);
+ at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256);
}
static void __init at91rm9200_initialize(void)
{
+ arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 18bacec..99ce5c9 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -21,6 +21,7 @@
#include <mach/board.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include "generic.h"
@@ -83,7 +84,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -241,15 +242,15 @@
data->chipselect = 4; /* can only use EBI ChipSelect 4 */
/* CF takes over CS4, CS5, CS6 */
- csa = at91_sys_read(AT91_EBI_CSA);
- at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+ csa = at91_ramc_read(0, AT91_EBI_CSA);
+ at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
/*
* Static memory controller timing adjustments.
* REVISIT: these timings are in terms of MCK cycles, so
* when MCK changes (cpufreq etc) so must these values...
*/
- at91_sys_write(AT91_SMC_CSR(4),
+ at91_ramc_write(0, AT91_SMC_CSR(4),
AT91_SMC_ACSS_STD
| AT91_SMC_DBW_16
| AT91_SMC_BAT
@@ -407,11 +408,11 @@
return;
/* enable the address range of CS3 */
- csa = at91_sys_read(AT91_EBI_CSA);
- at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
+ csa = at91_ramc_read(0, AT91_EBI_CSA);
+ at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
+ at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
| AT91_SMC_NWS_(5)
| AT91_SMC_TDF_(1)
| AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */
@@ -1114,7 +1115,6 @@
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index a028cdf..dd7f782 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -43,9 +43,9 @@
{
unsigned long x1, x2;
- x1 = at91_sys_read(AT91_ST_CRTR);
+ x1 = at91_st_read(AT91_ST_CRTR);
do {
- x2 = at91_sys_read(AT91_ST_CRTR);
+ x2 = at91_st_read(AT91_ST_CRTR);
if (x1 == x2)
break;
x1 = x2;
@@ -58,7 +58,7 @@
*/
static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
{
- u32 sr = at91_sys_read(AT91_ST_SR) & irqmask;
+ u32 sr = at91_st_read(AT91_ST_SR) & irqmask;
/*
* irqs should be disabled here, but as the irq is shared they are only
@@ -110,22 +110,22 @@
clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
{
/* Disable and flush pending timer interrupts */
- at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
- (void) at91_sys_read(AT91_ST_SR);
+ at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
+ at91_st_read(AT91_ST_SR);
last_crtr = read_CRTR();
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* PIT for periodic irqs; fixed rate of 1/HZ */
irqmask = AT91_ST_PITS;
- at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
+ at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* ALM for oneshot irqs, set by next_event()
* before 32 seconds have passed
*/
irqmask = AT91_ST_ALMS;
- at91_sys_write(AT91_ST_RTAR, last_crtr);
+ at91_st_write(AT91_ST_RTAR, last_crtr);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
@@ -133,7 +133,7 @@
irqmask = 0;
break;
}
- at91_sys_write(AT91_ST_IER, irqmask);
+ at91_st_write(AT91_ST_IER, irqmask);
}
static int
@@ -156,12 +156,12 @@
alm = read_CRTR();
/* Cancel any pending alarm; flush any pending IRQ */
- at91_sys_write(AT91_ST_RTAR, alm);
- (void) at91_sys_read(AT91_ST_SR);
+ at91_st_write(AT91_ST_RTAR, alm);
+ at91_st_read(AT91_ST_SR);
/* Schedule alarm by writing RTAR. */
alm += delta;
- at91_sys_write(AT91_ST_RTAR, alm);
+ at91_st_write(AT91_ST_RTAR, alm);
return status;
}
@@ -175,15 +175,24 @@
.set_mode = clkevt32k_mode,
};
+void __iomem *at91_st_base;
+
+void __init at91rm9200_ioremap_st(u32 addr)
+{
+ at91_st_base = ioremap(addr, 256);
+ if (!at91_st_base)
+ panic("Impossible to ioremap ST\n");
+}
+
/*
* ST (system timer) module supports both clockevents and clocksource.
*/
void __init at91rm9200_timer_init(void)
{
/* Disable all timer interrupts, and clear any pending ones */
- at91_sys_write(AT91_ST_IDR,
+ at91_st_write(AT91_ST_IDR,
AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
- (void) at91_sys_read(AT91_ST_SR);
+ at91_st_read(AT91_ST_SR);
/* Make IRQs happen for the system timer */
setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
@@ -192,7 +201,7 @@
* directly for the clocksource and all clockevents, after adjusting
* its prescaler from the 1 Hz default.
*/
- at91_sys_write(AT91_ST_RTMR, 1);
+ at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d4036ba..4ade265 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -309,27 +310,27 @@
static void __init at91sam9260_map_io(void)
{
- if (cpu_is_at91sam9xe()) {
+ if (cpu_is_at91sam9xe())
at91sam9xe_map_io();
- } else if (cpu_is_at91sam9g20()) {
- at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE);
- at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE);
- } else {
- at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE);
- at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE);
- }
+ else if (cpu_is_at91sam9g20())
+ at91_init_sram(0, AT91SAM9G20_SRAM_BASE, AT91SAM9G20_SRAM_SIZE);
+ else
+ at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE);
}
static void __init at91sam9260_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
+ at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512);
at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
+ at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
}
static void __init at91sam9260_initialize(void)
{
+ arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 642ccb6..40f6aea 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -21,6 +21,7 @@
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
+#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include "generic.h"
@@ -84,7 +85,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -422,8 +423,8 @@
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
@@ -717,18 +718,42 @@
.start = AT91SAM9260_BASE_RTT,
.end = AT91SAM9260_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
- }
+ }, {
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device at91sam9260_rtt_device = {
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
};
+
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+ at91sam9260_rtt_device.name = "rtc-at91sam9";
+ /*
+ * The second resource is needed:
+ * GPBR will serve as the storage for RTC time offset
+ */
+ at91sam9260_rtt_device.num_resources = 2;
+ rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
+ 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+ rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+ /* Only one resource is needed: RTT not used as RTC */
+ at91sam9260_rtt_device.num_resources = 1;
+}
+#endif
+
static void __init at91_add_device_rtt(void)
{
+ at91_add_device_rtt_rtc();
platform_device_register(&at91sam9260_rtt_device);
}
@@ -1139,7 +1164,6 @@
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
@@ -1215,8 +1239,7 @@
* CF/IDE
* -------------------------------------------------------------------- */
-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
- defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
@@ -1265,7 +1288,7 @@
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
switch (data->chipselect) {
case 4:
@@ -1288,7 +1311,7 @@
return;
}
- at91_sys_write(AT91_MATRIX_EBICSA, csa);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa);
if (gpio_is_valid(data->rst_pin)) {
at91_set_multi_drive(data->rst_pin, 0);
@@ -1313,10 +1336,8 @@
if (data->flags & AT91_CF_TRUE_IDE)
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
- pdev->name = "at91_ide";
#else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
#endif
else
pdev->name = "at91_cf";
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 023c2ff..684c5df 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -282,12 +283,15 @@
{
at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
+ at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512);
at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
+ at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
}
static void __init at91sam9261_initialize(void)
{
+ arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index fc59cbd..096da87 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,6 +24,7 @@
#include <mach/board.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
+#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include "generic.h"
@@ -87,7 +88,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -236,8 +237,8 @@
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
@@ -603,6 +604,8 @@
.start = AT91SAM9261_BASE_RTT,
.end = AT91SAM9261_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
}
};
@@ -610,11 +613,32 @@
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
};
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+ at91sam9261_rtt_device.name = "rtc-at91sam9";
+ /*
+ * The second resource is needed:
+ * GPBR will serve as the storage for RTC time offset
+ */
+ at91sam9261_rtt_device.num_resources = 2;
+ rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
+ 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+ rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+ /* Only one resource is needed: RTT not used as RTC */
+ at91sam9261_rtt_device.num_resources = 1;
+}
+#endif
+
static void __init at91_add_device_rtt(void)
{
+ at91_add_device_rtt_rtc();
platform_device_register(&at91sam9261_rtt_device);
}
@@ -991,7 +1015,6 @@
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 75e876c..0b4fa5a 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -302,13 +303,17 @@
{
at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
+ at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512);
+ at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512);
at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
+ at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
}
static void __init at91sam9263_initialize(void)
{
+ arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 7b46b27..53688c46 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -23,6 +23,7 @@
#include <mach/board.h>
#include <mach/at91sam9263.h>
#include <mach/at91sam9263_matrix.h>
+#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include "generic.h"
@@ -92,7 +93,7 @@
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -355,8 +356,8 @@
* Compact Flash (PCMCIA or IDE)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
- defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
@@ -409,7 +410,7 @@
* we assume SMC timings are configured by board code,
* except True IDE where timings are controlled by driver
*/
- ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
switch (data->chipselect) {
case 4:
at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
@@ -428,7 +429,7 @@
data->chipselect);
return;
}
- at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+ at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
if (gpio_is_valid(data->det_pin)) {
at91_set_gpio_input(data->det_pin, 1);
@@ -450,7 +451,7 @@
at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
- pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
platform_device_register(pdev);
}
#else
@@ -496,8 +497,8 @@
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+ csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
+ at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
@@ -891,7 +892,8 @@
.num_resources = ARRAY_SIZE(isi_resources),
};
-void __init at91_add_device_isi(void)
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck)
{
at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
@@ -904,14 +906,20 @@
at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
+
+ if (use_pck_as_mck) {
+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
+
+ /* TODO: register the PCK for ISI_MCK and set its parent */
+ }
}
#else
-void __init at91_add_device_isi(void) {}
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck) {}
#endif
@@ -959,6 +967,8 @@
.start = AT91SAM9263_BASE_RTT0,
.end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
}
};
@@ -966,7 +976,6 @@
.name = "at91_rtt",
.id = 0,
.resource = rtt0_resources,
- .num_resources = ARRAY_SIZE(rtt0_resources),
};
static struct resource rtt1_resources[] = {
@@ -974,6 +983,8 @@
.start = AT91SAM9263_BASE_RTT1,
.end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
}
};
@@ -981,11 +992,53 @@
.name = "at91_rtt",
.id = 1,
.resource = rtt1_resources,
- .num_resources = ARRAY_SIZE(rtt1_resources),
};
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+ struct platform_device *pdev;
+ struct resource *r;
+
+ switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
+ case 0:
+ /*
+ * The second resource is needed only for the chosen RTT:
+ * GPBR will serve as the storage for RTC time offset
+ */
+ at91sam9263_rtt0_device.num_resources = 2;
+ at91sam9263_rtt1_device.num_resources = 1;
+ pdev = &at91sam9263_rtt0_device;
+ r = rtt0_resources;
+ break;
+ case 1:
+ at91sam9263_rtt0_device.num_resources = 1;
+ at91sam9263_rtt1_device.num_resources = 2;
+ pdev = &at91sam9263_rtt1_device;
+ r = rtt1_resources;
+ break;
+ default:
+ pr_err("at91sam9263: only supports 2 RTT (%d)\n",
+ CONFIG_RTC_DRV_AT91SAM9_RTT);
+ return;
+ }
+
+ pdev->name = "rtc-at91sam9";
+ r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+ r[1].end = r[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+ /* Only one resource is needed: RTT not used as RTC */
+ at91sam9263_rtt0_device.num_resources = 1;
+ at91sam9263_rtt1_device.num_resources = 1;
+}
+#endif
+
static void __init at91_add_device_rtt(void)
{
+ at91_add_device_rtt_rtc();
platform_device_register(&at91sam9263_rtt0_device);
platform_device_register(&at91sam9263_rtt1_device);
}
@@ -1371,7 +1424,6 @@
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index 518e423..7af2e10 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -15,16 +15,17 @@
#include <linux/linkage.h>
#include <mach/hardware.h>
-#include <mach/at91sam9_sdramc.h>
+#include <mach/at91_ramc.h>
#include <mach/at91_rstc.h>
.arm
.globl at91sam9_alt_restart
-at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants
- ldr r1, =at91_rstc_base
- ldr r1, [r1]
+at91sam9_alt_restart: ldr r0, =at91_ramc_base @ preload constants
+ ldr r0, [r0]
+ ldr r4, =at91_rstc_base
+ ldr r1, [r4]
mov r2, #1
mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN
@@ -37,6 +38,3 @@
str r4, [r1, #AT91_RSTC_CR] @ reset processor
b .
-
-.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS + AT91_SDRAMC0
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1cb6a96..a41622ea6 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -331,12 +331,16 @@
{
at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
+ at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
+ at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
+ at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
}
static void __init at91sam9g45_initialize(void)
{
+ arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b7582dd..4108295 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -14,6 +14,7 @@
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
@@ -24,11 +25,15 @@
#include <mach/board.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at_hdmac.h>
#include <mach/atmel-mci.h>
+#include <media/atmel-isi.h>
+
#include "generic.h"
+#include "clock.h"
/* --------------------------------------------------------------------
@@ -38,10 +43,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-static struct at_dma_platform_data atdma_pdata = {
- .nr_channels = 8,
-};
-
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DMA,
@@ -56,12 +57,11 @@
};
static struct platform_device at_hdmac_device = {
- .name = "at_hdmac",
+ .name = "at91sam9g45_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@@ -69,9 +69,15 @@
void __init at91_add_device_hdmac(void)
{
- dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
- dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
- platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+ struct device_node *of_node =
+ of_find_node_by_name(NULL, "dma-controller");
+
+ if (of_node)
+ of_node_put(of_node);
+ else
+#endif
+ platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
@@ -552,8 +558,8 @@
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
@@ -869,6 +875,96 @@
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * Image Sensor Interface
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
+static u64 isi_dmamask = DMA_BIT_MASK(32);
+static struct isi_platform_data isi_data;
+
+struct resource isi_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_ISI,
+ .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_ISI,
+ .end = AT91SAM9G45_ID_ISI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_isi_device = {
+ .name = "atmel_isi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &isi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &isi_data,
+ },
+ .resource = isi_resources,
+ .num_resources = ARRAY_SIZE(isi_resources),
+};
+
+static struct clk_lookup isi_mck_lookups[] = {
+ CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
+};
+
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck)
+{
+ struct clk *pck;
+ struct clk *parent;
+
+ if (!data)
+ return;
+ isi_data = *data;
+
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */
+ at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */
+ at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */
+ at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */
+
+ platform_device_register(&at91sam9g45_isi_device);
+
+ if (use_pck_as_mck) {
+ at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */
+
+ pck = clk_get(NULL, "pck1");
+ parent = clk_get(NULL, "plla");
+
+ BUG_ON(IS_ERR(pck) || IS_ERR(parent));
+
+ if (clk_set_parent(pck, parent)) {
+ pr_err("Failed to set PCK's parent\n");
+ } else {
+ /* Register PCK as ISI_MCK */
+ isi_mck_lookups[0].clk = pck;
+ clkdev_add_table(isi_mck_lookups,
+ ARRAY_SIZE(isi_mck_lookups));
+ }
+
+ clk_put(pck);
+ clk_put(parent);
+ }
+}
+#else
+void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck) {}
+#endif
+
/* --------------------------------------------------------------------
* LCD Controller
@@ -1098,6 +1194,8 @@
.start = AT91SAM9G45_BASE_RTT,
.end = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
}
};
@@ -1105,11 +1203,32 @@
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
};
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+ at91sam9g45_rtt_device.name = "rtc-at91sam9";
+ /*
+ * The second resource is needed:
+ * GPBR will serve as the storage for RTC time offset
+ */
+ at91sam9g45_rtt_device.num_resources = 2;
+ rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
+ 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+ rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+ /* Only one resource is needed: RTT not used as RTC */
+ at91sam9g45_rtt_device.num_resources = 1;
+}
+#endif
+
static void __init at91_add_device_rtt(void)
{
+ at91_add_device_rtt_rtc();
platform_device_register(&at91sam9g45_rtt_device);
}
@@ -1564,7 +1683,6 @@
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
index 0468be1..9d45718 100644
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -12,7 +12,7 @@
#include <linux/linkage.h>
#include <mach/hardware.h>
-#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91_ramc.h>
#include <mach/at91_rstc.h>
.arm
@@ -20,9 +20,10 @@
.globl at91sam9g45_restart
at91sam9g45_restart:
- ldr r0, .at91_va_base_sdramc0 @ preload constants
- ldr r1, =at91_rstc_base
- ldr r1, [r1]
+ ldr r5, =at91_ramc_base @ preload constants
+ ldr r0, [r5]
+ ldr r4, =at91_rstc_base
+ ldr r1, [r4]
mov r2, #1
mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
@@ -35,6 +36,3 @@
str r4, [r1, #AT91_RSTC_CR] @ reset processor
b .
-
-.at91_va_base_sdramc0:
- .word AT91_VA_BASE_SYS + AT91_DDRSDRC0
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d2c91a8..63d9372 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -287,12 +288,15 @@
{
at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
+ at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
+ at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
}
static void __init at91sam9rl_initialize(void)
{
+ arm_pm_idle = at91sam9_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 61908dc..eda72e8 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -20,6 +20,7 @@
#include <mach/board.h>
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at_hdmac.h>
@@ -33,10 +34,6 @@
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-static struct at_dma_platform_data atdma_pdata = {
- .nr_channels = 2,
-};
-
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9RL_BASE_DMA,
@@ -51,12 +48,11 @@
};
static struct platform_device at_hdmac_device = {
- .name = "at_hdmac",
+ .name = "at91sam9rl_dma",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
@@ -64,7 +60,6 @@
void __init at91_add_device_hdmac(void)
{
- dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else
@@ -271,8 +266,8 @@
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
@@ -688,6 +683,8 @@
.start = AT91SAM9RL_BASE_RTT,
.end = AT91SAM9RL_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
}
};
@@ -695,11 +692,32 @@
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
};
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+ at91sam9rl_rtt_device.name = "rtc-at91sam9";
+ /*
+ * The second resource is needed:
+ * GPBR will serve as the storage for RTC time offset
+ */
+ at91sam9rl_rtt_device.num_resources = 2;
+ rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
+ 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+ rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+ /* Only one resource is needed: RTT not used as RTC */
+ at91sam9rl_rtt_device.num_resources = 1;
+}
+#endif
+
static void __init at91_add_device_rtt(void)
{
+ at91_add_device_rtt_rtc();
platform_device_register(&at91sam9rl_rtt_device);
}
@@ -1134,7 +1152,6 @@
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
new file mode 100644
index 0000000..d17d426
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -0,0 +1,370 @@
+/*
+ * Chip-specific setup code for the AT91SAM9x5 family
+ *
+ * Copyright (C) 2010-2012 Atmel Corporation.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9x5.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
+#include <mach/board.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "clock.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioAB_clk = {
+ .name = "pioAB_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_PIOAB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCD_clk = {
+ .name = "pioCD_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_PIOCD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk smd_clk = {
+ .name = "smd_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_SMD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_USART0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_USART1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_USART2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* USART3 clock - Only for sam9g25/sam9x25 */
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_USART3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+ .name = "twi0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_TWI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+ .name = "twi1_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_TWI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi2_clk = {
+ .name = "twi2_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_TWI2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart0_clk = {
+ .name = "uart0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_UART0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart1_clk = {
+ .name = "uart1_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_UART1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb0_clk = {
+ .name = "tcb0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+ .name = "pwm_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_PWM,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma0_clk = {
+ .name = "dma0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_DMA0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma1_clk = {
+ .name = "dma1_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_DMA1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+ .name = "uhphs_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */
+static struct clk macb0_clk = {
+ .name = "pclk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_EMAC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* isi clock - Only for sam9g25 */
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* emac1 clock - Only for sam9x25 */
+static struct clk macb1_clk = {
+ .name = "pclk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_EMAC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc_clk = {
+ .name = "ssc_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_SSC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* can0 clock - Only for sam9x35 */
+static struct clk can0_clk = {
+ .name = "can0_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_CAN0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+/* can1 clock - Only for sam9x35 */
+static struct clk can1_clk = {
+ .name = "can1_clk",
+ .pmc_mask = 1 << AT91SAM9X5_ID_CAN1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioAB_clk,
+ &pioCD_clk,
+ &smd_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &twi0_clk,
+ &twi1_clk,
+ &twi2_clk,
+ &mmc0_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &uart0_clk,
+ &uart1_clk,
+ &tcb0_clk,
+ &pwm_clk,
+ &adc_clk,
+ &dma0_clk,
+ &dma1_clk,
+ &uhphs_clk,
+ &udphs_clk,
+ &mmc1_clk,
+ &ssc_clk,
+ // irq0
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+ /* lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+ CLKDEV_CON_ID("pioA", &pioAB_clk),
+ CLKDEV_CON_ID("pioB", &pioAB_clk),
+ CLKDEV_CON_ID("pioC", &pioCD_clk),
+ CLKDEV_CON_ID("pioD", &pioCD_clk),
+ /* additional fake clock for macb_hclk */
+ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
+ CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9x5_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clkdev_add_table(periph_clocks_lookups,
+ ARRAY_SIZE(periph_clocks_lookups));
+
+ if (cpu_is_at91sam9g25()
+ || cpu_is_at91sam9x25())
+ clk_register(&usart3_clk);
+
+ if (cpu_is_at91sam9g25()
+ || cpu_is_at91sam9x25()
+ || cpu_is_at91sam9g35()
+ || cpu_is_at91sam9x35())
+ clk_register(&macb0_clk);
+
+ if (cpu_is_at91sam9g15()
+ || cpu_is_at91sam9g35()
+ || cpu_is_at91sam9x35())
+ clk_register(&lcdc_clk);
+
+ if (cpu_is_at91sam9g25())
+ clk_register(&isi_clk);
+
+ if (cpu_is_at91sam9x25())
+ clk_register(&macb1_clk);
+
+ if (cpu_is_at91sam9x25()
+ || cpu_is_at91sam9x35()) {
+ clk_register(&can0_clk);
+ clk_register(&can1_clk);
+ }
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * AT91SAM9x5 processor initialization
+ * -------------------------------------------------------------------- */
+
+static void __init at91sam9x5_map_io(void)
+{
+ at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
+}
+
+static void __init at91sam9x5_ioremap_registers(void)
+{
+ if (of_at91sam926x_pit_init() < 0)
+ panic("Impossible to find PIT\n");
+ at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
+}
+
+void __init at91sam9x5_initialize(void)
+{
+ arm_pm_restart = at91sam9g45_restart;
+ at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
+
+ /* Register GPIO subsystem (using DT) */
+ at91_gpio_init(NULL, 0);
+}
+
+/* --------------------------------------------------------------------
+ * AT91SAM9x5 devices (temporary before modification of code)
+ * -------------------------------------------------------------------- */
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A and B */
+ 1, /* Parallel IO Controller C and D */
+ 4, /* Soft Modem */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
+ 6, /* Two-Wire Interface 0 */
+ 6, /* Two-Wire Interface 1 */
+ 6, /* Two-Wire Interface 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 5, /* UART 0 */
+ 5, /* UART 1 */
+ 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+ 0, /* Pulse Width Modulation Controller */
+ 0, /* ADC Controller */
+ 0, /* DMA Controller 0 */
+ 0, /* DMA Controller 1 */
+ 2, /* USB Host High Speed port */
+ 2, /* USB Device High speed port */
+ 3, /* Ethernet MAC 0 */
+ 3, /* LDC Controller or Image Sensor Interface */
+ 0, /* Multimedia Card Interface 1 */
+ 3, /* Ethernet MAC 1 */
+ 4, /* Synchronous Serial Interface */
+ 4, /* CAN Controller 0 */
+ 4, /* CAN Controller 1 */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+};
+
+struct at91_init_soc __initdata at91sam9x5_soc = {
+ .map_io = at91sam9x5_map_io,
+ .default_irq_priority = at91sam9x5_default_irq_priority,
+ .ioremap_registers = at91sam9x5_ioremap_registers,
+ .register_clocks = at91sam9x5_register_clocks,
+ .init = at91sam9x5_initialize,
+};
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 56ba3bd..5400a1d 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
@@ -37,8 +38,19 @@
return AT91X40_MASTER_CLOCK;
}
+static void at91x40_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ __raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
+ cpu_do_idle();
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
+ arm_pm_idle = at91x40_idle;
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
| (1 << AT91X40_ID_IRQ2);
}
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index dfff289..6ca680a 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -28,6 +28,12 @@
#include <asm/mach/time.h>
#include <mach/at91_tc.h>
+#define at91_tc_read(field) \
+ __raw_readl(AT91_TC + field)
+
+#define at91_tc_write(field, value) \
+ __raw_writel(value, AT91_TC + field);
+
/*
* 3 counter/timer units present.
*/
@@ -37,12 +43,12 @@
static unsigned long at91x40_gettimeoffset(void)
{
- return (at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+ return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
}
static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
{
- at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_SR);
+ at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
timer_tick();
return IRQ_HANDLED;
}
@@ -57,20 +63,20 @@
{
unsigned int v;
- at91_sys_write(AT91_TC + AT91_TC_BCR, 0);
- v = at91_sys_read(AT91_TC + AT91_TC_BMR);
+ at91_tc_write(AT91_TC_BCR, 0);
+ v = at91_tc_read(AT91_TC_BMR);
v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
- at91_sys_write(AT91_TC + AT91_TC_BMR, v);
+ at91_tc_write(AT91_TC_BMR, v);
- at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
- at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
- at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
- at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
- at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
+ at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
+ at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
+ at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
+ at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
+ at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
- at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
+ at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
}
struct sys_timer at91x40_timer = {
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
deleted file mode 100644
index ac3de4f..0000000
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cap9adk.c
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init cap9adk_init_early(void)
-{
- /* Initialize processor: 12 MHz crystal */
- at91_initialize(12000000);
-
- /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
- at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
- /* ... POWER LED always on */
- at91_set_gpio_output(AT91_PIN_PC29, 1);
-
- /* Setup the serial ports and console */
- at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cap9adk_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
- .vbus_pin = AT91_PIN_PB31,
-};
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
- .x_plate_ohms = 450,
- .y_plate_ohms = 250,
- .pressure_max = 15000,
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init cap9adk_add_device_ts(void)
-{
- at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
- at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
-}
-#else
-static void __init cap9adk_add_device_ts(void) {}
-#endif
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info cap9adk_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = AT91_PIN_PC4,
- },
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata cap9adk_mmc_data = {
- .wire4 = 1,
- .det_pin = -EINVAL,
- .wp_pin = -EINVAL,
- .vcc_pin = -EINVAL,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cap9adk_macb_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
- {
- .name = "NAND partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata cap9adk_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = -EINVAL,
- .enable_pin = AT91_PIN_PD15,
- .parts = cap9adk_nand_partitions,
- .num_parts = ARRAY_SIZE(cap9adk_nand_partitions),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 2,
- .ncs_write_setup = 1,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 6,
- .nrd_pulse = 4,
- .ncs_write_pulse = 6,
- .nwe_pulse = 4,
-
- .read_cycle = 8,
- .write_cycle = 8,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 1,
-};
-
-static void __init cap9adk_add_device_nand(void)
-{
- unsigned long csa;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (cap9adk_nand_data.bus_width_16)
- cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
-
- at91_add_device_nand(&cap9adk_nand_data);
-}
-
-
-/*
- * NOR flash
- */
-static struct mtd_partition cap9adk_nor_partitions[] = {
- {
- .name = "NOR partition",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data cap9adk_nor_data = {
- .width = 2,
- .parts = cap9adk_nor_partitions,
- .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
-};
-
-#define NOR_BASE AT91_CHIPSELECT_0
-#define NOR_SIZE SZ_8M
-
-static struct resource nor_flash_resources[] = {
- {
- .start = NOR_BASE,
- .end = NOR_BASE + NOR_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cap9adk_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &cap9adk_nor_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nor_smc_config = {
- .ncs_read_setup = 2,
- .nrd_setup = 4,
- .ncs_write_setup = 2,
- .nwe_setup = 4,
-
- .ncs_read_pulse = 10,
- .nrd_pulse = 8,
- .ncs_write_pulse = 10,
- .nwe_pulse = 8,
-
- .read_cycle = 16,
- .write_cycle = 16,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
- .tdf_cycles = 1,
-};
-
-static __init void cap9adk_add_device_nor(void)
-{
- unsigned long csa;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
-
- platform_device_register(&cap9adk_nor_flash);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(4965),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D70VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
- if (on)
- at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
- else
- at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
- .guard_time = 1,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data cap9adk_ac97_data = {
- .reset_pin = -EINVAL,
-};
-
-
-static void __init cap9adk_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&cap9adk_usbh_data);
- /* USB HS */
- at91_add_device_usba(&cap9adk_usba_udc_data);
- /* SPI */
- at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
- /* Touchscreen */
- cap9adk_add_device_ts();
- /* MMC */
- at91_add_device_mmc(1, &cap9adk_mmc_data);
- /* Ethernet */
- at91_add_device_eth(&cap9adk_macb_data);
- /* NAND */
- cap9adk_add_device_nand();
- /* NOR Flash */
- cap9adk_add_device_nor();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LCD Controller */
- at91_add_device_lcdc(&cap9adk_lcdc_data);
- /* AC97 */
- at91_add_device_ac97(&cap9adk_ac97_data);
-}
-
-MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
- /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = cap9adk_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cap9adk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 9ab3d1e..989e1c5 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -43,6 +43,7 @@
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9260_matrix.h>
+#include <mach/at91_matrix.h>
#include "sam9_smc.h"
#include "generic.h"
@@ -238,8 +239,8 @@
{
unsigned long csa;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
/* configure chip-select 0 (NOR) */
sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 368e142..e094cc8 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -38,6 +38,7 @@
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include <mach/cpu.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index bb6b434..08c8ad8 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -38,12 +38,6 @@
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/* det_pin is not connected */
@@ -109,6 +103,7 @@
static const char *at91_dt_board_compat[] __initdata = {
"atmel,at91sam9m10g45ek",
+ "atmel,at91sam9x5ek",
"calao,usb-a9g20",
NULL
};
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 07ef35b..f23aabe 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -26,6 +26,7 @@
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include <mach/cpu.h>
#include "generic.h"
@@ -110,7 +111,7 @@
at91_add_device_mmc(0, &eco920_mmc_data);
platform_device_register(&eco920_flash);
- at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
+ at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
| AT91_SMC_RWSETUP_(1)
| AT91_SMC_DBW_8
| AT91_SMC_WSEN
@@ -122,7 +123,7 @@
at91_set_deglitch(AT91_PIN_PA23, 1);
/* Initialization of the Static Memory Controller for Chip Select 3 */
- at91_sys_write(AT91_SMC_CSR(3),
+ at91_ramc_write(0, AT91_SMC_CSR(3),
AT91_SMC_DBW_16 | /* 16 bit */
AT91_SMC_WSEN |
AT91_SMC_NWS_(5) | /* wait states */
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index eec02cd..1815152 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-at91/board-flexibity.c
*
- * Copyright (C) 2010 Flexibity
+ * Copyright (C) 2010-2011 Flexibity
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
*
@@ -62,6 +62,13 @@
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
};
+/* I2C devices */
+static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1307", 0x68),
+ },
+};
+
/* SPI devices */
static struct spi_board_info flexibity_spi_devices[] = {
{ /* DataFlash chip */
@@ -141,6 +148,9 @@
at91_add_device_usbh(&flexibity_usbh_data);
/* USB Device */
at91_add_device_udc(&flexibity_udc_data);
+ /* I2C */
+ at91_add_device_i2c(flexibity_i2c_devices,
+ ARRAY_SIZE(flexibity_i2c_devices));
/* SPI */
at91_add_device_spi(flexibity_spi_devices,
ARRAY_SIZE(flexibity_spi_devices));
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index d75a4a2..bb99145 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -38,6 +38,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ab024fa..59e35dd 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -39,6 +39,7 @@
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 782f379..9083df0 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -41,6 +41,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index ef7c12a..11cbaa8 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -41,6 +41,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include "generic.h"
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ea0d1b9..57497e2 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,11 +24,13 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/leds.h>
-#include <linux/clk.h>
#include <linux/atmel-mci.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
+#include <media/soc_camera.h>
+#include <media/atmel-isi.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -185,6 +187,71 @@
/*
+ * ISI
+ */
+static struct isi_platform_data __initdata isi_data = {
+ .frate = ISI_CFG1_FRATE_CAPTURE_ALL,
+ /* to use codec and preview path simultaneously */
+ .full_mode = 1,
+ .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
+ /* ISI_MCK is provided by programmable clock or external clock */
+ .mck_hz = 25000000,
+};
+
+
+/*
+ * soc-camera OV2640
+ */
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+ defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
+{
+ /* ISI board for ek using default 8-bits connection */
+ return SOCAM_DATAWIDTH_8;
+}
+
+static int i2c_camera_power(struct device *dev, int on)
+{
+ /* enable or disable the camera */
+ pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+ at91_set_gpio_output(AT91_PIN_PD13, !on);
+
+ if (!on)
+ goto out;
+
+ /* If enabled, give a reset impulse */
+ at91_set_gpio_output(AT91_PIN_PD12, 0);
+ msleep(20);
+ at91_set_gpio_output(AT91_PIN_PD12, 1);
+ msleep(100);
+
+out:
+ return 0;
+}
+
+static struct i2c_board_info i2c_camera = {
+ I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+ .bus_id = 0,
+ .board_info = &i2c_camera,
+ .i2c_adapter_id = 0,
+ .power = i2c_camera_power,
+ .query_bus_param = isi_camera_query_bus_param,
+};
+
+static struct platform_device isi_ov2640 = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink_ov2640,
+ },
+};
+#endif
+
+
+/*
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
@@ -377,7 +444,12 @@
#endif
};
-
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+ defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+ &isi_ov2640,
+#endif
+};
static void __init ek_board_init(void)
{
@@ -399,6 +471,8 @@
ek_add_device_nand();
/* I2C */
at91_add_device_i2c(0, NULL, 0);
+ /* ISI, using programmable clock as ISI_MCK */
+ at91_add_device_isi(&isi_data, true);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
/* Touch Screen */
@@ -410,6 +484,8 @@
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+ /* Other platform devices */
+ platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index bbd553e..52f4607 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -45,6 +45,7 @@
#include <mach/hardware.h>
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include <mach/cpu.h>
#include "generic.h"
@@ -393,7 +394,7 @@
at91_set_A_periph(AT91_PIN_PC6, 0);
/* Initialization of the Static Memory Controller for Chip Select 2 */
- at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
+ at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
| AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
| AT91_SMC_TDF_(0x100) /* float time */
);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 61873f3..be51ca7 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -28,9 +28,12 @@
#include <mach/at91_pmc.h>
#include <mach/cpu.h>
+#include <asm/proc-fns.h>
+
#include "clock.h"
#include "generic.h"
+void __iomem *at91_pmc_base;
/*
* There's a lot more which can be done with clocks, including cpufreq
@@ -47,26 +50,38 @@
/*
* Chips have some kind of clocks : group them by functionality
*/
-#define cpu_has_utmi() ( cpu_is_at91cap9() \
- || cpu_is_at91sam9rl() \
- || cpu_is_at91sam9g45())
+#define cpu_has_utmi() ( cpu_is_at91sam9rl() \
+ || cpu_is_at91sam9g45() \
+ || cpu_is_at91sam9x5())
#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
- || cpu_is_at91sam9g45())
+ || cpu_is_at91sam9g45() \
+ || cpu_is_at91sam9x5())
#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
- || cpu_is_at91sam9g45()))
+ || cpu_is_at91sam9g45() \
+ || cpu_is_at91sam9x5()))
-#define cpu_has_upll() (cpu_is_at91sam9g45())
+#define cpu_has_upll() (cpu_is_at91sam9g45() \
+ || cpu_is_at91sam9x5())
/* USB host HS & FS */
#define cpu_has_uhp() (!cpu_is_at91sam9rl())
/* USB device FS only */
#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
- || cpu_is_at91sam9g45()))
+ || cpu_is_at91sam9g45() \
+ || cpu_is_at91sam9x5()))
+
+#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
+ || cpu_is_at91sam9x5())
+
+#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
+ || cpu_is_at91sam9x5())
+
+#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5())
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
@@ -111,11 +126,11 @@
value = 0;
// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
- at91_sys_write(AT91_CKGR_PLLBR, value);
+ at91_pmc_write(AT91_CKGR_PLLBR, value);
do {
cpu_relax();
- } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
+ } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
}
static struct clk pllb = {
@@ -130,31 +145,24 @@
static void pmc_sys_mode(struct clk *clk, int is_on)
{
if (is_on)
- at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
+ at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask);
else
- at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
+ at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask);
}
static void pmc_uckr_mode(struct clk *clk, int is_on)
{
- unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
-
- if (cpu_is_at91sam9g45()) {
- if (is_on)
- uckr |= AT91_PMC_BIASEN;
- else
- uckr &= ~AT91_PMC_BIASEN;
- }
+ unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
if (is_on) {
is_on = AT91_PMC_LOCKU;
- at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
+ at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
} else
- at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
+ at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
do {
cpu_relax();
- } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
+ } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
}
/* USB function clocks (PLLB must be 48 MHz) */
@@ -190,9 +198,9 @@
static void pmc_periph_mode(struct clk *clk, int is_on)
{
if (is_on)
- at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
+ at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
else
- at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
+ at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
}
static struct clk __init *at91_css_to_clk(unsigned long css)
@@ -210,11 +218,24 @@
return &utmi_clk;
else if (cpu_has_pllb())
return &pllb;
+ break;
+ /* alternate PMC: can use master clock */
+ case AT91_PMC_CSS_MASTER:
+ return &mck;
}
return NULL;
}
+static int pmc_prescaler_divider(u32 reg)
+{
+ if (cpu_has_alt_prescaler()) {
+ return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET);
+ } else {
+ return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET);
+ }
+}
+
static void __clk_enable(struct clk *clk)
{
if (clk->parent)
@@ -316,12 +337,22 @@
{
unsigned long flags;
unsigned prescale;
+ unsigned long prescale_offset, css_mask;
unsigned long actual;
if (!clk_is_programmable(clk))
return -EINVAL;
if (clk->users)
return -EBUSY;
+
+ if (cpu_has_alt_prescaler()) {
+ prescale_offset = PMC_ALT_PRES_OFFSET;
+ css_mask = AT91_PMC_ALT_PCKR_CSS;
+ } else {
+ prescale_offset = PMC_PRES_OFFSET;
+ css_mask = AT91_PMC_CSS;
+ }
+
spin_lock_irqsave(&clk_lock, flags);
actual = clk->parent->rate_hz;
@@ -329,10 +360,10 @@
if (actual && actual <= rate) {
u32 pckr;
- pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= AT91_PMC_CSS; /* clock selection */
- pckr |= prescale << 2;
- at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
+ pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
+ pckr &= css_mask; /* keep clock selection */
+ pckr |= prescale << prescale_offset;
+ at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
break;
}
@@ -366,7 +397,7 @@
clk->rate_hz = parent->rate_hz;
clk->parent = parent;
- at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
+ at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id);
spin_unlock_irqrestore(&clk_lock, flags);
return 0;
@@ -378,11 +409,17 @@
{
struct clk *parent;
u32 pckr;
+ unsigned int css_mask;
- pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+ if (cpu_has_alt_prescaler())
+ css_mask = AT91_PMC_ALT_PCKR_CSS;
+ else
+ css_mask = AT91_PMC_CSS;
+
+ pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
+ parent = at91_css_to_clk(pckr & css_mask);
clk->parent = parent;
- clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2));
+ clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
}
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
@@ -396,19 +433,24 @@
u32 scsr, pcsr, uckr = 0, sr;
struct clk *clk;
- seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
- seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
- seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
- seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
- seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
+ scsr = at91_pmc_read(AT91_PMC_SCSR);
+ pcsr = at91_pmc_read(AT91_PMC_PCSR);
+ sr = at91_pmc_read(AT91_PMC_SR);
+ seq_printf(s, "SCSR = %8x\n", scsr);
+ seq_printf(s, "PCSR = %8x\n", pcsr);
+ seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
+ seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
+ seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
if (cpu_has_pllb())
- seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- if (cpu_has_utmi())
- seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
- seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+ seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR));
+ if (cpu_has_utmi()) {
+ uckr = at91_pmc_read(AT91_CKGR_UCKR);
+ seq_printf(s, "UCKR = %8x\n", uckr);
+ }
+ seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR));
if (cpu_has_upll())
- seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB));
- seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+ seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB));
+ seq_printf(s, "SR = %8x\n", sr);
seq_printf(s, "\n");
@@ -596,16 +638,14 @@
if (cpu_is_at91rm9200()) {
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
}
- at91_sys_write(AT91_CKGR_PLLBR, 0);
+ at91_pmc_write(AT91_CKGR_PLLBR, 0);
udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
@@ -622,13 +662,13 @@
/* Setup divider by 10 to reach 48 MHz */
usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
- at91_sys_write(AT91_PMC_USB, usbr);
+ at91_pmc_write(AT91_PMC_USB, usbr);
/* Now set uhpck values */
uhpck.parent = &utmi_clk;
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
uhpck.rate_hz = utmi_clk.rate_hz;
- uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+ uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
int __init at91_clock_init(unsigned long main_clock)
@@ -637,6 +677,10 @@
int i;
int pll_overclock = false;
+ at91_pmc_base = ioremap(AT91_PMC, 256);
+ if (!at91_pmc_base)
+ panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
+
/*
* When the bootloader initialized the main oscillator correctly,
* there's no problem using the cycle counter. But if it didn't,
@@ -645,14 +689,14 @@
*/
if (!main_clock) {
do {
- tmp = at91_sys_read(AT91_CKGR_MCFR);
+ tmp = at91_pmc_read(AT91_CKGR_MCFR);
} while (!(tmp & AT91_PMC_MAINRDY));
main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
}
main_clk.rate_hz = main_clock;
/* report if PLLA is more than mildly overclocked */
- plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
+ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
if (cpu_has_300M_plla()) {
if (plla.rate_hz > 300000000)
pll_overclock = true;
@@ -666,8 +710,8 @@
if (pll_overclock)
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
- if (cpu_is_at91sam9g45()) {
- mckr = at91_sys_read(AT91_PMC_MCKR);
+ if (cpu_has_plladiv2()) {
+ mckr = at91_pmc_read(AT91_PMC_MCKR);
plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */
}
@@ -688,6 +732,10 @@
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+
+ /* UTMI bias and PLL are managed at the same time */
+ if (cpu_has_upll())
+ utmi_clk.pmc_mask |= AT91_PMC_BIASEN;
}
/*
@@ -703,10 +751,10 @@
* MCK and CPU derive from one of those primary clocks.
* For now, assume this parentage won't change.
*/
- mckr = at91_sys_read(AT91_PMC_MCKR);
+ mckr = at91_pmc_read(AT91_PMC_MCKR);
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
- freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
+ freq /= pmc_prescaler_divider(mckr); /* prescale */
if (cpu_is_at91rm9200()) {
mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else if (cpu_is_at91sam9g20()) {
@@ -714,13 +762,19 @@
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
- } else if (cpu_is_at91sam9g45()) {
+ } else if (cpu_has_mdiv3()) {
mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
} else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
}
+ if (cpu_has_alt_prescaler()) {
+ /* Programmable clocks can use MCK */
+ mck.type |= CLK_TYPE_PRIMARY;
+ mck.id = 4;
+ }
+
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
at91_clk_add(standard_pmc_clocks[i]);
@@ -770,9 +824,15 @@
pr_debug("Clocks: disable unused %s\n", clk->name);
}
- at91_sys_write(AT91_PMC_PCDR, pcdr);
- at91_sys_write(AT91_PMC_SCDR, scdr);
+ at91_pmc_write(AT91_PMC_PCDR, pcdr);
+ at91_pmc_write(AT91_PMC_SCDR, scdr);
return 0;
}
late_initcall(at91_clock_reset);
+
+void at91sam9_idle(void)
+{
+ at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index a851e6c..555d956 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -39,20 +39,15 @@
{
struct timeval before, after;
int idle_time;
- u32 saved_lpr;
local_irq_disable();
do_gettimeofday(&before);
if (index == 0)
/* Wait for interrupt state */
cpu_do_idle();
- else if (index == 1) {
- asm("b 1f; .align 5; 1:");
- asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
- saved_lpr = sdram_selfrefresh_enable();
- cpu_do_idle();
- sdram_selfrefresh_disable(saved_lpr);
- }
+ else if (index == 1)
+ at91_standby();
+
do_gettimeofday(&after);
local_irq_enable();
idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 5941334..4cad85e 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -28,6 +28,7 @@
/* Timer */
struct sys_timer;
+extern void at91rm9200_ioremap_st(u32 addr);
extern struct sys_timer at91rm9200_timer;
extern void at91sam926x_ioremap_pit(u32 addr);
extern struct sys_timer at91sam926x_timer;
@@ -45,7 +46,6 @@
extern void __init at91sam9263_set_console_clock(int id);
extern void __init at91sam9rl_set_console_clock(int id);
extern void __init at91sam9g45_set_console_clock(int id);
-extern void __init at91cap9_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
#else
@@ -57,6 +57,9 @@
extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
+/* idle */
+extern void at91sam9_idle(void);
+
/* reset */
extern void at91_ioremap_rstc(u32 base_addr);
extern void at91sam9_alt_restart(char, const char *);
@@ -65,6 +68,12 @@
/* shutdown */
extern void at91_ioremap_shdwc(u32 base_addr);
+/* Matrix */
+extern void at91_ioremap_matrix(u32 base_addr);
+
+/* Ram Controler */
+extern void at91_ioremap_ramc(int id, u32 addr, u32 size);
+
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h
new file mode 100644
index 0000000..02fae9d
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_matrix.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#ifndef __MACH_AT91_MATRIX_H__
+#define __MACH_AT91_MATRIX_H__
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_matrix_base;
+
+#define at91_matrix_read(field) \
+ __raw_readl(at91_matrix_base + field)
+
+#define at91_matrix_write(field, value) \
+ __raw_writel(value, at91_matrix_base + field);
+
+#else
+.extern at91_matrix_base
+#endif
+
+#endif /* __MACH_AT91_MATRIX_H__ */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index e46f93e..3660478 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -16,17 +16,27 @@
#ifndef AT91_PMC_H
#define AT91_PMC_H
-#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
-#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_pmc_base;
-#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
+#define at91_pmc_read(field) \
+ __raw_readl(at91_pmc_base + field)
+
+#define at91_pmc_write(field, value) \
+ __raw_writel(value, at91_pmc_base + field)
+#else
+.extern at91_aic_base
+#endif
+
+#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */
+#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */
+
+#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@@ -36,27 +46,31 @@
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
-#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
-#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
-#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
+#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */
+#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */
+#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
+#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
-#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
-#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */
+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */
+#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */
+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */
+#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */
+#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */
-#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
+#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
-#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
+#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */
+#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */
#define AT91_PMC_DIV (0xff << 0) /* Divider */
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
@@ -67,27 +81,37 @@
#define AT91_PMC_USBDIV_4 (2 << 28)
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
-#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
+#define AT91_PMC_MCKR 0x30 /* Master Clock Register */
#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
#define AT91_PMC_CSS_SLOW (0 << 0)
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
-#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-#define AT91_PMC_PRES_1 (0 << 2)
-#define AT91_PMC_PRES_2 (1 << 2)
-#define AT91_PMC_PRES_4 (2 << 2)
-#define AT91_PMC_PRES_8 (3 << 2)
-#define AT91_PMC_PRES_16 (4 << 2)
-#define AT91_PMC_PRES_32 (5 << 2)
-#define AT91_PMC_PRES_64 (6 << 2)
+#define PMC_PRES_OFFSET 2
+#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */
+#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET)
+#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET)
+#define PMC_ALT_PRES_OFFSET 4
+#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */
+#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET)
+#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET)
#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
#define AT91RM9200_PMC_MDIV_3 (2 << 8)
#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
@@ -99,35 +123,55 @@
#define AT91_PMC_PLLADIV2_OFF (0 << 12)
#define AT91_PMC_PLLADIV2_ON (1 << 12)
-#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */
+#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */
#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
#define AT91_PMC_USBS_PLLA (0 << 0)
#define AT91_PMC_USBS_UPLL (1 << 0)
#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */
+#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */
+#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */
+#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV)
+
+#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */
+#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */
#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
#define AT91_PMC_CSSMCK_CSS (0 << 8)
#define AT91_PMC_CSSMCK_MCK (1 << 8)
-#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
-#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
-#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
+#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */
+#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */
+#define AT91_PMC_SR 0x68 /* Status Register */
#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
-#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
-#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */
+#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */
+#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */
+#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */
-#define AT91_PMC_PROT (AT91_PMC + 0xe4) /* Protect Register [AT91CAP9 revC only] */
-#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
+#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */
+#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */
+#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */
+#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */
-#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
+#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */
+#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */
+#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */
+
+#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9] */
+#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */
+#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command */
+#define AT91_PMC_PCR_DIV (0x3 << 16) /* Divisor Value */
+#define AT91_PMC_PCRDIV(n) (((n) << 16) & AT91_PMC_PCR_DIV)
+#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h
new file mode 100644
index 0000000..d8aeb27
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ramc.h
@@ -0,0 +1,32 @@
+/*
+ * Header file for the Atmel RAM Controller
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#ifndef __AT91_RAMC_H__
+#define __AT91_RAMC_H__
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_ramc_base[];
+
+#define at91_ramc_read(id, field) \
+ __raw_readl(at91_ramc_base[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+ __raw_writel(value, at91_ramc_base[id] + field)
+#else
+.extern at91_ramc_base
+#endif
+
+#define AT91_MEMCTRL_MC 0
+#define AT91_MEMCTRL_SDRAMC 1
+#define AT91_MEMCTRL_DDRSDR 2
+
+#include <mach/at91rm9200_sdramc.h>
+#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91sam9_sdramc.h>
+
+#endif /* __AT91_RAMC_H__ */
diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
index 8847173..969aac2 100644
--- a/arch/arm/mach-at91/include/mach/at91_st.h
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -16,34 +16,46 @@
#ifndef AT91_ST_H
#define AT91_ST_H
-#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_st_base;
+
+#define at91_st_read(field) \
+ __raw_readl(at91_st_base + field)
+
+#define at91_st_write(field, value) \
+ __raw_writel(value, at91_st_base + field);
+#else
+.extern at91_st_base
+#endif
+
+#define AT91_ST_CR 0x00 /* Control Register */
#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
-#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
+#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */
#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
-#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
+#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */
#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
-#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
+#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */
#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
-#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
+#define AT91_ST_SR 0x10 /* Status Register */
#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
-#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
-#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
-#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
+#define AT91_ST_IER 0x14 /* Interrupt Enable Register */
+#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */
+#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */
-#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
+#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */
#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
-#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
+#define AT91_ST_CRTR 0x24 /* Current Real-time Register */
#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
deleted file mode 100644
index 61d9529..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0 8 /* USART 0 */
-#define AT91CAP9_ID_US1 9 /* USART 1 */
-#define AT91CAP9_ID_US2 10 /* USART 2 */
-#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN 13 /* CAN */
-#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
-#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC 22 /* Ethernet */
-#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
-#define AT91CAP9_ID_DMA 27 /* DMA Controller */
-#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP 29 /* USB Host Port */
-#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS 0xfff78000
-#define AT91CAP9_BASE_TCB0 0xfff7c000
-#define AT91CAP9_BASE_TC0 0xfff7c000
-#define AT91CAP9_BASE_TC1 0xfff7c040
-#define AT91CAP9_BASE_TC2 0xfff7c080
-#define AT91CAP9_BASE_MCI0 0xfff80000
-#define AT91CAP9_BASE_MCI1 0xfff84000
-#define AT91CAP9_BASE_TWI 0xfff88000
-#define AT91CAP9_BASE_US0 0xfff8c000
-#define AT91CAP9_BASE_US1 0xfff90000
-#define AT91CAP9_BASE_US2 0xfff94000
-#define AT91CAP9_BASE_SSC0 0xfff98000
-#define AT91CAP9_BASE_SSC1 0xfff9c000
-#define AT91CAP9_BASE_AC97C 0xfffa0000
-#define AT91CAP9_BASE_SPI0 0xfffa4000
-#define AT91CAP9_BASE_SPI1 0xfffa8000
-#define AT91CAP9_BASE_CAN 0xfffac000
-#define AT91CAP9_BASE_PWMC 0xfffb8000
-#define AT91CAP9_BASE_EMAC 0xfffbc000
-#define AT91CAP9_BASE_ADC 0xfffc0000
-#define AT91CAP9_BASE_ISI 0xfffc4000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
- (0xfffffd50 - AT91_BASE_SYS) : \
- (0xfffffd60 - AT91_BASE_SYS))
-
-#define AT91CAP9_BASE_ECC 0xffffe200
-#define AT91CAP9_BASE_DMA 0xffffec00
-#define AT91CAP9_BASE_SMC 0xffffe800
-#define AT91CAP9_BASE_DBGU AT91_BASE_DBGU1
-#define AT91CAP9_BASE_PIOA 0xfffff200
-#define AT91CAP9_BASE_PIOB 0xfffff400
-#define AT91CAP9_BASE_PIOC 0xfffff600
-#define AT91CAP9_BASE_PIOD 0xfffff800
-#define AT91CAP9_BASE_RSTC 0xfffffd00
-#define AT91CAP9_BASE_SHDWC 0xfffffd10
-#define AT91CAP9_BASE_RTT 0xfffffd20
-#define AT91CAP9_BASE_PIT 0xfffffd30
-#define AT91CAP9_BASE_WDT 0xfffffd40
-
-#define AT91_USART0 AT91CAP9_BASE_US0
-#define AT91_USART1 AT91CAP9_BASE_US1
-#define AT91_USART2 AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
deleted file mode 100644
index 4b9d4af..0000000
--- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- *
- * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
-
-#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */
-#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */
-#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */
-#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index bacb511..603e6aa 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -77,26 +77,22 @@
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
-#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
-#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
-
#define AT91RM9200_BASE_DBGU AT91_BASE_DBGU0 /* Debug Unit */
#define AT91RM9200_BASE_PIOA 0xfffff400 /* PIO Controller A */
#define AT91RM9200_BASE_PIOB 0xfffff600 /* PIO Controller B */
#define AT91RM9200_BASE_PIOC 0xfffff800 /* PIO Controller C */
#define AT91RM9200_BASE_PIOD 0xfffffa00 /* PIO Controller D */
+#define AT91RM9200_BASE_ST 0xfffffd00 /* System Timer */
#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
+#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */
#define AT91_USART0 AT91RM9200_BASE_US0
#define AT91_USART1 AT91RM9200_BASE_US1
#define AT91_USART2 AT91RM9200_BASE_US2
#define AT91_USART3 AT91RM9200_BASE_US3
-#define AT91_MATRIX 0 /* not supported */
-
/*
* Internal Memory.
*/
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
index d34e4ed..aeaadfb 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -17,10 +17,10 @@
#define AT91RM9200_MC_H
/* Memory Controller */
-#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
+#define AT91_MC_RCR 0x00 /* MC Remap Control Register */
#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
-#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
+#define AT91_MC_ASR 0x04 /* MC Abort Status Register */
#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
@@ -40,16 +40,16 @@
#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
-#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
+#define AT91_MC_AASR 0x08 /* MC Abort Address Status Register */
-#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
+#define AT91_MC_MPR 0x0c /* MC Master Priority Register */
#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
+#define AT91_EBI_CSA 0x60 /* Chip Select Assignment Register */
#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
#define AT91_EBI_CS0A_SMC (0 << 0)
#define AT91_EBI_CS0A_BFC (1 << 0)
@@ -66,7 +66,7 @@
#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define AT91_SMC_CSR(n) (0x70 + ((n) * 4)) /* SMC Chip Select Register */
#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
#define AT91_SMC_NWS_(x) ((x) << 0)
#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
@@ -87,52 +87,8 @@
#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
#define AT91_SMC_RWHOLD_(x) ((x) << 28)
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91_SDRAMC_MODE_NORMAL (0 << 0)
-#define AT91_SDRAMC_MODE_NOP (1 << 0)
-#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0)
-#define AT91_SDRAMC_MODE_LMR (3 << 0)
-#define AT91_SDRAMC_MODE_REFRESH (4 << 0)
-#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */
-#define AT91_SDRAMC_DBW_32 (0 << 4)
-#define AT91_SDRAMC_DBW_16 (1 << 4)
-
-#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_SDRAMC_NC_8 (0 << 0)
-#define AT91_SDRAMC_NC_9 (1 << 0)
-#define AT91_SDRAMC_NC_10 (2 << 0)
-#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_SDRAMC_NR_11 (0 << 2)
-#define AT91_SDRAMC_NR_12 (1 << 2)
-#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91_SDRAMC_CAS_2 (2 << 5)
-#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */
-#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */
-#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */
-
/* Burst Flash Controller register */
-#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */
+#define AT91_BFC_MR 0xc0 /* Mode Register */
#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
#define AT91_BFC_BFCOM_DISABLED (0 << 0)
#define AT91_BFC_BFCOM_ASYNC (1 << 0)
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
new file mode 100644
index 0000000..aa047f45
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (SDRAMC only) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_SDRAMC_H
+#define AT91RM9200_SDRAMC_H
+
+/* SDRAM Controller registers */
+#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */
+#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0)
+#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0)
+#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0)
+#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0)
+#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0)
+#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */
+#define AT91RM9200_SDRAMC_DBW_32 (0 << 4)
+#define AT91RM9200_SDRAMC_DBW_16 (1 << 4)
+
+#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */
+#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
+
+#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */
+#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91RM9200_SDRAMC_NC_8 (0 << 0)
+#define AT91RM9200_SDRAMC_NC_9 (1 << 0)
+#define AT91RM9200_SDRAMC_NC_10 (2 << 0)
+#define AT91RM9200_SDRAMC_NC_11 (3 << 0)
+#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91RM9200_SDRAMC_NR_11 (0 << 2)
+#define AT91RM9200_SDRAMC_NR_12 (1 << 2)
+#define AT91RM9200_SDRAMC_NR_13 (2 << 2)
+#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91RM9200_SDRAMC_NB_2 (0 << 4)
+#define AT91RM9200_SDRAMC_NB_4 (1 << 4)
+#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91RM9200_SDRAMC_CAS_2 (2 << 5)
+#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
+#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
+#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
+#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
+#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
+#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
+
+#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */
+#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */
+#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */
+#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */
+#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */
+#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index fa5ca27..08ae9af 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -78,15 +78,12 @@
#define AT91SAM9260_BASE_ADC 0xfffe0000
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
#define AT91SAM9260_BASE_ECC 0xffffe800
+#define AT91SAM9260_BASE_SDRAMC 0xffffea00
#define AT91SAM9260_BASE_SMC 0xffffec00
+#define AT91SAM9260_BASE_MATRIX 0xffffee00
#define AT91SAM9260_BASE_DBGU AT91_BASE_DBGU0
#define AT91SAM9260_BASE_PIOA 0xfffff400
#define AT91SAM9260_BASE_PIOB 0xfffff600
@@ -96,6 +93,7 @@
#define AT91SAM9260_BASE_RTT 0xfffffd20
#define AT91SAM9260_BASE_PIT 0xfffffd30
#define AT91SAM9260_BASE_WDT 0xfffffd40
+#define AT91SAM9260_BASE_GPBR 0xfffffd50
#define AT91_USART0 AT91SAM9260_BASE_US0
#define AT91_USART1 AT91SAM9260_BASE_US1
@@ -115,6 +113,8 @@
#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
+#define AT91SAM9260_SRAM_BASE 0x002FF000 /* Internal SRAM base address */
+#define AT91SAM9260_SRAM_SIZE SZ_8K /* Internal SRAM size (8Kb) */
#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
@@ -128,6 +128,8 @@
#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */
#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+#define AT91SAM9G20_SRAM_BASE 0x002FC000 /* Internal SRAM base address */
+#define AT91SAM9G20_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index 020f02e..f459df4 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -15,12 +15,12 @@
#ifndef AT91SAM9260_MATRIX_H
#define AT91SAM9260_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
@@ -28,11 +28,11 @@
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
@@ -43,11 +43,11 @@
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
@@ -55,11 +55,11 @@
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 7cde2d3..44fbdc1 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -63,14 +63,11 @@
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
#define AT91SAM9261_BASE_SMC 0xffffec00
+#define AT91SAM9261_BASE_MATRIX 0xffffee00
+#define AT91SAM9261_BASE_SDRAMC 0xffffea00
#define AT91SAM9261_BASE_DBGU AT91_BASE_DBGU0
#define AT91SAM9261_BASE_PIOA 0xfffff400
#define AT91SAM9261_BASE_PIOB 0xfffff600
@@ -80,6 +77,7 @@
#define AT91SAM9261_BASE_RTT 0xfffffd20
#define AT91SAM9261_BASE_PIT 0xfffffd30
#define AT91SAM9261_BASE_WDT 0xfffffd40
+#define AT91SAM9261_BASE_GPBR 0xfffffd50
#define AT91_USART0 AT91SAM9261_BASE_US0
#define AT91_USART1 AT91SAM9261_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index 69c6501..a50cdf8 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -15,15 +15,15 @@
#ifndef AT91SAM9261_MATRIX_H
#define AT91SAM9261_MATRIX_H
-#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
+#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
@@ -31,7 +31,7 @@
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
+#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
@@ -43,7 +43,7 @@
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
@@ -58,7 +58,7 @@
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
+#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */
#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 5949abd..d96cbb2 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -72,18 +72,15 @@
#define AT91SAM9263_BASE_2DGE 0xfffc8000
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
-#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-
#define AT91SAM9263_BASE_ECC0 0xffffe000
+#define AT91SAM9263_BASE_SDRAMC0 0xffffe200
#define AT91SAM9263_BASE_SMC0 0xffffe400
#define AT91SAM9263_BASE_ECC1 0xffffe600
+#define AT91SAM9263_BASE_SDRAMC1 0xffffe800
#define AT91SAM9263_BASE_SMC1 0xffffea00
+#define AT91SAM9263_BASE_MATRIX 0xffffec00
#define AT91SAM9263_BASE_DBGU AT91_BASE_DBGU1
#define AT91SAM9263_BASE_PIOA 0xfffff200
#define AT91SAM9263_BASE_PIOB 0xfffff400
@@ -96,6 +93,7 @@
#define AT91SAM9263_BASE_PIT 0xfffffd30
#define AT91SAM9263_BASE_WDT 0xfffffd40
#define AT91SAM9263_BASE_RTT1 0xfffffd50
+#define AT91SAM9263_BASE_GPBR 0xfffffd60
#define AT91_USART0 AT91SAM9263_BASE_US0
#define AT91_USART1 AT91SAM9263_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
index 9b3efd3..ebb5fdb 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -15,15 +15,15 @@
#ifndef AT91SAM9263_MATRIX_H
#define AT91SAM9263_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
@@ -31,14 +31,14 @@
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
@@ -49,22 +49,22 @@
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
@@ -75,7 +75,7 @@
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
@@ -86,7 +86,7 @@
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
@@ -96,7 +96,7 @@
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
@@ -114,7 +114,7 @@
#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
-#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */
#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index e2f8da8..0210797 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -59,7 +59,6 @@
#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
-#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
@@ -76,7 +75,6 @@
#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
-#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_DDRSDRC_LPCB_DISABLE 0
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
@@ -94,11 +92,9 @@
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
-#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-#define AT91CAP9_DDRSDRC_MD_DDR 2
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
@@ -106,16 +102,10 @@
#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
-#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
-#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
-#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
-#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */
#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
@@ -131,10 +121,4 @@
#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */
#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
- at91_sys_read(AT91_DDRSDRC##num + reg)
-#define at91_ramc_write(num, reg, value) \
- at91_sys_write(AT91_DDRSDRC##num + reg, value)
-
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index 100f5a5..3d085a9 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -82,10 +82,4 @@
#define AT91_SDRAMC_MD_SDRAM 0
#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
- at91_sys_read(AT91_SDRAMC##num + reg)
-#define at91_ramc_write(num, reg, value) \
- at91_sys_write(AT91_SDRAMC##num + reg, value)
-
#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index eb18a70..175e1fd 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -18,6 +18,35 @@
#include <mach/cpu.h>
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+ /* Setup register */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse register */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Cycle register */
+ u16 read_cycle;
+ u16 write_cycle;
+
+ /* Mode register */
+ u32 mode;
+ u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index dd9c95e..d052abc 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -84,17 +84,14 @@
#define AT91SAM9G45_BASE_TC5 0xfffd4080
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-
#define AT91SAM9G45_BASE_ECC 0xffffe200
+#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400
+#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600
#define AT91SAM9G45_BASE_DMA 0xffffec00
#define AT91SAM9G45_BASE_SMC 0xffffe800
+#define AT91SAM9G45_BASE_MATRIX 0xffffea00
#define AT91SAM9G45_BASE_DBGU AT91_BASE_DBGU1
#define AT91SAM9G45_BASE_PIOA 0xfffff200
#define AT91SAM9G45_BASE_PIOB 0xfffff400
@@ -107,6 +104,7 @@
#define AT91SAM9G45_BASE_PIT 0xfffffd30
#define AT91SAM9G45_BASE_WDT 0xfffffd40
#define AT91SAM9G45_BASE_RTC 0xfffffdb0
+#define AT91SAM9G45_BASE_GPBR 0xfffffd60
#define AT91_USART0 AT91SAM9G45_BASE_US0
#define AT91_USART1 AT91SAM9G45_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
index c972d60..b76e2ed 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -15,18 +15,18 @@
#ifndef AT91SAM9G45_MATRIX_H
#define AT91SAM9G45_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
@@ -37,14 +37,14 @@
#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
#define AT91_MATRIX_ULBT_128 (7 << 0)
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
@@ -52,22 +52,22 @@
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
@@ -81,7 +81,7 @@
#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
@@ -95,7 +95,7 @@
#define AT91_MATRIX_RCB10 (1 << 10)
#define AT91_MATRIX_RCB11 (1 << 11)
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */
+#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
@@ -107,12 +107,12 @@
#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
-#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */
+#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */
#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
#define AT91C_VDEC_SEL_OFF (0 << 0)
#define AT91C_VDEC_SEL_ON (1 << 0)
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
@@ -138,13 +138,13 @@
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
-#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
-#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index d7bead7..e0073eb 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -69,15 +69,13 @@
/*
* System Peripherals (offset from AT91_BASE_SYS)
*/
-#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
#define AT91SAM9RL_BASE_DMA 0xffffe600
#define AT91SAM9RL_BASE_ECC 0xffffe800
+#define AT91SAM9RL_BASE_SDRAMC 0xffffea00
#define AT91SAM9RL_BASE_SMC 0xffffec00
+#define AT91SAM9RL_BASE_MATRIX 0xffffee00
#define AT91SAM9RL_BASE_DBGU AT91_BASE_DBGU0
#define AT91SAM9RL_BASE_PIOA 0xfffff400
#define AT91SAM9RL_BASE_PIOB 0xfffff600
@@ -88,6 +86,7 @@
#define AT91SAM9RL_BASE_RTT 0xfffffd20
#define AT91SAM9RL_BASE_PIT 0xfffffd30
#define AT91SAM9RL_BASE_WDT 0xfffffd40
+#define AT91SAM9RL_BASE_GPBR 0xfffffd60
#define AT91SAM9RL_BASE_RTC 0xfffffe00
#define AT91_USART0 AT91SAM9RL_BASE_US0
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
index 5f91490..6d160ad 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -14,12 +14,12 @@
#ifndef AT91SAM9RL_MATRIX_H
#define AT91SAM9RL_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
@@ -27,12 +27,12 @@
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
@@ -43,12 +43,12 @@
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
@@ -56,7 +56,7 @@
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
@@ -64,7 +64,7 @@
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
@@ -74,7 +74,7 @@
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
new file mode 100644
index 0000000..a297a77
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -0,0 +1,79 @@
+/*
+ * Chip-specific header file for the AT91SAM9x5 family
+ *
+ * Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9x5 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_H
+#define AT91SAM9X5_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91SAM9X5_ID_PIOAB 2 /* Parallel I/O Controller A and B */
+#define AT91SAM9X5_ID_PIOCD 3 /* Parallel I/O Controller C and D */
+#define AT91SAM9X5_ID_SMD 4 /* SMD Soft Modem (SMD) */
+#define AT91SAM9X5_ID_USART0 5 /* USART 0 */
+#define AT91SAM9X5_ID_USART1 6 /* USART 1 */
+#define AT91SAM9X5_ID_USART2 7 /* USART 2 */
+#define AT91SAM9X5_ID_USART3 8 /* USART 3 */
+#define AT91SAM9X5_ID_TWI0 9 /* Two-Wire Interface 0 */
+#define AT91SAM9X5_ID_TWI1 10 /* Two-Wire Interface 1 */
+#define AT91SAM9X5_ID_TWI2 11 /* Two-Wire Interface 2 */
+#define AT91SAM9X5_ID_MCI0 12 /* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9X5_ID_SPI0 13 /* Serial Peripheral Interface 0 */
+#define AT91SAM9X5_ID_SPI1 14 /* Serial Peripheral Interface 1 */
+#define AT91SAM9X5_ID_UART0 15 /* UART 0 */
+#define AT91SAM9X5_ID_UART1 16 /* UART 1 */
+#define AT91SAM9X5_ID_TCB 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9X5_ID_PWM 18 /* Pulse Width Modulation Controller */
+#define AT91SAM9X5_ID_ADC 19 /* ADC Controller */
+#define AT91SAM9X5_ID_DMA0 20 /* DMA Controller 0 */
+#define AT91SAM9X5_ID_DMA1 21 /* DMA Controller 1 */
+#define AT91SAM9X5_ID_UHPHS 22 /* USB Host High Speed */
+#define AT91SAM9X5_ID_UDPHS 23 /* USB Device High Speed */
+#define AT91SAM9X5_ID_EMAC0 24 /* Ethernet MAC0 */
+#define AT91SAM9X5_ID_LCDC 25 /* LCD Controller */
+#define AT91SAM9X5_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9X5_ID_MCI1 26 /* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9X5_ID_EMAC1 27 /* Ethernet MAC1 */
+#define AT91SAM9X5_ID_SSC 28 /* Synchronous Serial Controller */
+#define AT91SAM9X5_ID_CAN0 29 /* CAN Controller 0 */
+#define AT91SAM9X5_ID_CAN1 30 /* CAN Controller 1 */
+#define AT91SAM9X5_ID_IRQ0 31 /* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9X5_BASE_USART0 0xf801c000
+#define AT91SAM9X5_BASE_USART1 0xf8020000
+#define AT91SAM9X5_BASE_USART2 0xf8024000
+
+/*
+ * System Peripherals
+ */
+#define AT91SAM9X5_BASE_DDRSDRC0 0xffffe800
+
+/*
+ * Base addresses for early serial code (uncompress.h)
+ */
+#define AT91_DBGU AT91_BASE_DBGU0
+#define AT91_USART0 AT91SAM9X5_BASE_USART0
+#define AT91_USART1 AT91SAM9X5_BASE_USART1
+#define AT91_USART2 AT91SAM9X5_BASE_USART2
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9X5_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9X5_SRAM_SIZE SZ_32K /* Internal SRAM size (32Kb) */
+
+#define AT91SAM9X5_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9X5_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
new file mode 100644
index 0000000..a606d39
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
@@ -0,0 +1,53 @@
+/*
+ * Matrix-centric header file for the AT91SAM9x5 family
+ *
+ * Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Only EBI related registers.
+ * Write Protect register definitions may be useful.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_MATRIX_H
+#define AT91SAM9X5_MATRIX_H
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
+#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
+#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
+#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
+#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
+#define AT91_MATRIX_MP_OFF (0 << 25)
+#define AT91_MATRIX_MP_ON (1 << 25)
+
+#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
+#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
+#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
+#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
+#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
+#define AT91_MATRIX_WPSR_WPV (1 << 0)
+#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index a57829f..9068021 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -28,18 +28,18 @@
#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
#define AT91_BASE_SYS 0xffc00000
-#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */
-#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */
-#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */
-#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */
-#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */
-#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */
-#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */
-#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */
+#define AT91_EBI 0xffe00000 /* External Bus Interface */
+#define AT91_SF 0xfff00000 /* Special Function */
+#define AT91_USART1 0xfffcc000 /* USART 1 */
+#define AT91_USART0 0xfffd0000 /* USART 0 */
+#define AT91_TC 0xfffe0000 /* Timer Counter */
+#define AT91_PIOA 0xffff0000 /* PIO Controller A */
+#define AT91_PS 0xffff4000 /* Power Save */
+#define AT91_WD 0xffff8000 /* Watchdog Timer */
/*
* The AT91x40 series doesn't have a debug unit like the other AT91 parts.
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 3b33f07..dc8d6d4 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -107,6 +107,8 @@
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
+ u8 correction_cap; /* PMECC correction capability */
+ u16 sector_size; /* Sector size for PMECC */
struct mtd_partition *parts;
unsigned int num_parts;
};
@@ -179,7 +181,9 @@
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
/* ISI */
-extern void __init at91_add_device_isi(void);
+struct isi_platform_data;
+extern void __init at91_add_device_isi(struct isi_platform_data *data,
+ bool use_pck_as_mck);
/* Touchscreen Controller */
struct at91_tsadcc_data {
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index f6ce936..0118c33 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,7 +25,6 @@
#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
-#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
@@ -51,10 +50,6 @@
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
-/* PMC revision */
-#define ARCH_REVISION_CAP9_B 0x399
-#define ARCH_REVISION_CAP9_C 0x601
-
/* RM9200 type */
#define ARCH_REVISON_9200_BGA (0 << 0)
#define ARCH_REVISON_9200_PQFP (1 << 0)
@@ -63,9 +58,6 @@
/* 920T */
AT91_SOC_RM9200,
- /* CAP */
- AT91_SOC_CAP9,
-
/* SAM92xx */
AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
@@ -86,9 +78,6 @@
/* RM9200 */
AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
- /* CAP9 */
- AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C,
-
/* SAM9260 */
AT91_SOC_SAM9XE,
@@ -195,16 +184,6 @@
#define cpu_is_at91sam9x25() (0)
#endif
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9)
-#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B)
-#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C)
-#else
-#define cpu_is_at91cap9() (0)
-#define cpu_is_at91cap9_revB() (0)
-#define cpu_is_at91cap9_revC() (0)
-#endif
-
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 2d0e4e9..e9e29a6 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -19,7 +19,7 @@
/* DBGU base */
/* rm9200, 9260/9g20, 9261/9g10, 9rl */
#define AT91_BASE_DBGU0 0xfffff200
-/* 9263, 9g45, cap9 */
+/* 9263, 9g45 */
#define AT91_BASE_DBGU1 0xffffee00
#if defined(CONFIG_ARCH_AT91RM9200)
@@ -34,8 +34,8 @@
#include <mach/at91sam9rl.h>
#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91SAM9X5)
+#include <mach/at91sam9x5.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
#else
@@ -59,9 +59,10 @@
/*
* On all at91 have the Advanced Interrupt Controller starts at address
- * 0xfffff000
+ * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
*/
#define AT91_AIC 0xfffff000
+#define AT91_PMC 0xfffffc00
/*
* Peripheral identifiers/interrupts.
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
index 4ca09ef..4003001 100644
--- a/arch/arm/mach-at91/include/mach/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -28,22 +28,4 @@
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
-#ifndef __ASSEMBLY__
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- __raw_writel(value, addr + reg_offset);
-}
-
-#endif
-
#endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
deleted file mode 100644
index cbd64f3..0000000
--- a/arch/arm/mach-at91/include/mach/system.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
-#ifdef AT91_PS
- at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
- /*
- * Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Post-RM9200 processors need this in conjunction with the above
- * to save power when idle.
- */
- cpu_do_idle();
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1606379..6c9d5e6 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -136,7 +136,7 @@
unsigned long scsr;
int i;
- scsr = at91_sys_read(AT91_PMC_SCSR);
+ scsr = at91_pmc_read(AT91_PMC_SCSR);
/* USB must not be using PLLB */
if (cpu_is_at91rm9200()) {
@@ -150,11 +150,6 @@
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
- } else if (cpu_is_at91cap9()) {
- if ((scsr & AT91CAP9_PMC_UHP) != 0) {
- pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
- return 0;
- }
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -165,7 +160,7 @@
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
continue;
- css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
if (css != AT91_PMC_CSS_SLOW) {
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
return 0;
@@ -193,23 +188,36 @@
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-static void (*slow_clock)(void);
+static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
+ void __iomem *ramc1, int memctrl);
#ifdef CONFIG_AT91_SLOW_CLOCK
-extern void at91_slow_clock(void);
+extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
+ void __iomem *ramc1, int memctrl);
extern u32 at91_slow_clock_sz;
#endif
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+ if (id < 0 || id > 1) {
+ pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+ BUG();
+ }
+ at91_ramc_base[id] = ioremap(addr, size);
+ if (!at91_ramc_base[id])
+ panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
static int at91_pm_enter(suspend_state_t state)
{
- u32 saved_lpr;
at91_gpio_suspend();
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
/* remember all the always-wake irqs */
- (at91_sys_read(AT91_PMC_PCSR)
+ (at91_pmc_read(AT91_PMC_PCSR)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
| (at91_extern_irq))
@@ -234,11 +242,18 @@
* turning off the main oscillator; reverse on wakeup.
*/
if (slow_clock) {
+ int memctrl = AT91_MEMCTRL_SDRAMC;
+
+ if (cpu_is_at91rm9200())
+ memctrl = AT91_MEMCTRL_MC;
+ else if (cpu_is_at91sam9g45())
+ memctrl = AT91_MEMCTRL_DDRSDR;
#ifdef CONFIG_AT91_SLOW_CLOCK
/* copy slow_clock handler to SRAM, and call it */
memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
#endif
- slow_clock();
+ slow_clock(at91_pmc_base, at91_ramc_base[0],
+ at91_ramc_base[1], memctrl);
break;
} else {
pr_info("AT91: PM - no slow clock mode enabled ...\n");
@@ -259,16 +274,7 @@
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
- asm volatile ( "mov r0, #0\n\t"
- "b 1f\n\t"
- ".align 5\n\t"
- "1: mcr p15, 0, r0, c7, c10, 4\n\t"
- : /* no output */
- : /* no input */
- : "r0");
- saved_lpr = sdram_selfrefresh_enable();
- wait_for_interrupt_enable();
- sdram_selfrefresh_disable(saved_lpr);
+ at91_standby();
break;
case PM_SUSPEND_ON:
@@ -316,7 +322,7 @@
#ifdef CONFIG_ARCH_AT91RM9200
/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
- at91_sys_write(AT91_SDRAMC_LPR, 0);
+ at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
#endif
suspend_set_ops(&at91_pm_ops);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 7eb40d2..89f56f3 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -1,5 +1,19 @@
+/*
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ARCH_ARM_MACH_AT91_PM
+#define __ARCH_ARM_MACH_AT91_PM
+
+#include <mach/at91_ramc.h>
#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
+#include <mach/at91rm9200_sdramc.h>
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -11,51 +25,37 @@
* still in self-refresh is "not recommended", but seems to work.
*/
-static inline u32 sdram_selfrefresh_enable(void)
+static inline void at91rm9200_standby(void)
{
- u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+ u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
- at91_sys_write(AT91_SDRAMC_LPR, 0);
- at91_sys_write(AT91_SDRAMC_SRR, 1);
- return saved_lpr;
+ asm volatile(
+ "b 1f\n\t"
+ ".align 5\n\t"
+ "1: mcr p15, 0, %0, c7, c10, 4\n\t"
+ " str %0, [%1, %2]\n\t"
+ " str %3, [%1, %4]\n\t"
+ " mcr p15, 0, %0, c7, c0, 4\n\t"
+ " str %5, [%1, %2]"
+ :
+ : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+ "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+ "r" (lpr));
}
-#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-#define wait_for_interrupt_enable() asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
- : : "r" (0))
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91sam9_ddrsdr.h>
-
-
-static inline u32 sdram_selfrefresh_enable(void)
-{
- u32 saved_lpr, lpr;
-
- saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
-
- lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
- return saved_lpr;
-}
-
-#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
-#define wait_for_interrupt_enable() cpu_do_idle()
+#define at91_standby at91rm9200_standby
#elif defined(CONFIG_ARCH_AT91SAM9G45)
-#include <mach/at91sam9_ddrsdr.h>
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
* remember.
*/
-static u32 saved_lpr1;
-
-static inline u32 sdram_selfrefresh_enable(void)
+static inline void at91sam9g45_standby(void)
{
- /* Those tow values allow us to delay self-refresh activation
+ /* Those two values allow us to delay self-refresh activation
* to the maximum. */
u32 lpr0, lpr1;
- u32 saved_lpr0;
+ u32 saved_lpr0, saved_lpr1;
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
@@ -69,18 +69,15 @@
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
- return saved_lpr0;
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
-#define sdram_selfrefresh_disable(saved_lpr0) \
- do { \
- at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
- } while (0)
-#define wait_for_interrupt_enable() cpu_do_idle()
+#define at91_standby at91sam9g45_standby
#else
-#include <mach/at91sam9_sdramc.h>
#ifdef CONFIG_ARCH_AT91SAM9263
/*
@@ -90,18 +87,23 @@
#warning Assuming EB1 SDRAM controller is *NOT* used
#endif
-static inline u32 sdram_selfrefresh_enable(void)
+static inline void at91sam9_standby(void)
{
u32 saved_lpr, lpr;
saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
- return saved_lpr;
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
+ AT91_SDRAMC_LPCB_SELF_REFRESH);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
}
-#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
-#define wait_for_interrupt_enable() cpu_do_idle()
+#define at91_standby at91sam9_standby
+
+#endif
#endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 92dfb84..db54521 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -15,15 +15,7 @@
#include <linux/linkage.h>
#include <mach/hardware.h>
#include <mach/at91_pmc.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
-#include <mach/at91sam9_ddrsdr.h>
-#else
-#include <mach/at91sam9_sdramc.h>
-#endif
+#include <mach/at91_ramc.h>
#ifdef CONFIG_ARCH_AT91SAM9263
@@ -47,17 +39,23 @@
#define PLLALOCK_TIMEOUT 1000
#define PLLBLOCK_TIMEOUT 1000
+pmc .req r0
+sdramc .req r1
+ramc1 .req r2
+memctrl .req r3
+tmp1 .req r4
+tmp2 .req r5
/*
* Wait until master clock is ready (after switching master clock source)
*/
.macro wait_mckrdy
- mov r4, #MCKRDY_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #MCKRDY_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_MCKRDY
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MCKRDY
beq 1b
2:
.endm
@@ -66,12 +64,12 @@
* Wait until master oscillator has stabilized.
*/
.macro wait_moscrdy
- mov r4, #MOSCRDY_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #MOSCRDY_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_MOSCS
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_MOSCS
beq 1b
2:
.endm
@@ -80,12 +78,12 @@
* Wait until PLLA has locked.
*/
.macro wait_pllalock
- mov r4, #PLLALOCK_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #PLLALOCK_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_LOCKA
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_LOCKA
beq 1b
2:
.endm
@@ -94,80 +92,98 @@
* Wait until PLLB has locked.
*/
.macro wait_pllblock
- mov r4, #PLLBLOCK_TIMEOUT
-1: sub r4, r4, #1
- cmp r4, #0
+ mov tmp2, #PLLBLOCK_TIMEOUT
+1: sub tmp2, tmp2, #1
+ cmp tmp2, #0
beq 2f
- ldr r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
- tst r3, #AT91_PMC_LOCKB
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+ tst tmp1, #AT91_PMC_LOCKB
beq 1b
2:
.endm
.text
+/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
+ * void __iomem *ramc1, int memctrl)
+ */
ENTRY(at91_slow_clock)
/* Save registers on stack */
- stmfd sp!, {r0 - r12, lr}
+ stmfd sp!, {r4 - r12, lr}
/*
* Register usage:
- * R1 = Base address of AT91_PMC
- * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
- * R3 = temporary register
+ * R0 = Base address of AT91_PMC
+ * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+ * R2 = Base address of second RAM Controller or 0 if not present
+ * R3 = Memory controller
* R4 = temporary register
- * R5 = Base address of second RAM Controller or 0 if not present
+ * R5 = temporary register
*/
- ldr r1, .at91_va_base_pmc
- ldr r2, .at91_va_base_sdramc
- ldr r5, .at91_va_base_ramc1
/* Drain write buffer */
- mov r0, #0
- mcr p15, 0, r0, c7, c10, 4
+ mov tmp1, #0
+ mcr p15, 0, tmp1, c7, c10, 4
-#ifdef CONFIG_ARCH_AT91RM9200
+ cmp memctrl, #AT91_MEMCTRL_MC
+ bne ddr_sr_enable
+
+ /*
+ * at91rm9200 Memory controller
+ */
/* Put SDRAM in self-refresh mode */
- mov r3, #1
- str r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+ mov tmp1, #1
+ str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
+ b sdr_sr_done
+
+ /*
+ * DDRSDR Memory controller
+ */
+ddr_sr_enable:
+ cmp memctrl, #AT91_MEMCTRL_DDRSDR
+ bne sdr_sr_enable
/* prepare for DDRAM self-refresh mode */
- ldr r3, [r2, #AT91_DDRSDRC_LPR]
- str r3, .saved_sam9_lpr
- bic r3, #AT91_DDRSDRC_LPCB
- orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+ str tmp1, .saved_sam9_lpr
+ bic tmp1, #AT91_DDRSDRC_LPCB
+ orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* figure out if we use the second ram controller */
- cmp r5, #0
- ldrne r4, [r5, #AT91_DDRSDRC_LPR]
- strne r4, .saved_sam9_lpr1
- bicne r4, #AT91_DDRSDRC_LPCB
- orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+ cmp ramc1, #0
+ ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ strne tmp2, .saved_sam9_lpr1
+ bicne tmp2, #AT91_DDRSDRC_LPCB
+ orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
/* Enable DDRAM self-refresh mode */
- str r3, [r2, #AT91_DDRSDRC_LPR]
- strne r4, [r5, #AT91_DDRSDRC_LPR]
-#else
+ str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+ strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+
+ b sdr_sr_done
+
+ /*
+ * SDRAMC Memory controller
+ */
+sdr_sr_enable:
/* Enable SDRAM self-refresh mode */
- ldr r3, [r2, #AT91_SDRAMC_LPR]
- str r3, .saved_sam9_lpr
+ ldr tmp1, [sdramc, #AT91_SDRAMC_LPR]
+ str tmp1, .saved_sam9_lpr
- bic r3, #AT91_SDRAMC_LPCB
- orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
- str r3, [r2, #AT91_SDRAMC_LPR]
-#endif
+ bic tmp1, #AT91_SDRAMC_LPCB
+ orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
+ str tmp1, [sdramc, #AT91_SDRAMC_LPR]
+sdr_sr_done:
/* Save Master clock setting */
- ldr r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
- str r3, .saved_mckr
+ ldr tmp1, [pmc, #AT91_PMC_MCKR]
+ str tmp1, .saved_mckr
/*
* Set the Master clock source to slow clock
*/
- bic r3, r3, #AT91_PMC_CSS
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+ bic tmp1, tmp1, #AT91_PMC_CSS
+ str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
@@ -177,61 +193,61 @@
*
* See AT91RM9200 errata #27 and #28 for details.
*/
- mov r3, #0
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+ mov tmp1, #0
+ str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#endif
/* Save PLLA setting and disable it */
- ldr r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
- str r3, .saved_pllar
+ ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
+ str tmp1, .saved_pllar
- mov r3, #AT91_PMC_PLLCOUNT
- orr r3, r3, #(1 << 29) /* bit 29 always set */
- str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ mov tmp1, #AT91_PMC_PLLCOUNT
+ orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
+ str tmp1, [pmc, #AT91_CKGR_PLLAR]
/* Save PLLB setting and disable it */
- ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
- str r3, .saved_pllbr
+ ldr tmp1, [pmc, #AT91_CKGR_PLLBR]
+ str tmp1, .saved_pllbr
- mov r3, #AT91_PMC_PLLCOUNT
- str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ mov tmp1, #AT91_PMC_PLLCOUNT
+ str tmp1, [pmc, #AT91_CKGR_PLLBR]
/* Turn off the main oscillator */
- ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
- bic r3, r3, #AT91_PMC_MOSCEN
- str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ bic tmp1, tmp1, #AT91_PMC_MOSCEN
+ str tmp1, [pmc, #AT91_CKGR_MOR]
/* Wait for interrupt */
- mcr p15, 0, r0, c7, c0, 4
+ mcr p15, 0, tmp1, c7, c0, 4
/* Turn on the main oscillator */
- ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
- orr r3, r3, #AT91_PMC_MOSCEN
- str r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+ orr tmp1, tmp1, #AT91_PMC_MOSCEN
+ str tmp1, [pmc, #AT91_CKGR_MOR]
wait_moscrdy
/* Restore PLLB setting */
- ldr r3, .saved_pllbr
- str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ ldr tmp1, .saved_pllbr
+ str tmp1, [pmc, #AT91_CKGR_PLLBR]
- tst r3, #(AT91_PMC_MUL & 0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 1f
- tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 2f
1:
wait_pllblock
2:
/* Restore PLLA setting */
- ldr r3, .saved_pllar
- str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ ldr tmp1, .saved_pllar
+ str tmp1, [pmc, #AT91_CKGR_PLLAR]
- tst r3, #(AT91_PMC_MUL & 0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & 0xff0000)
bne 3f
- tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
beq 4f
3:
wait_pllalock
@@ -244,11 +260,11 @@
*
* See AT91RM9200 errata #27 and #28 for details.
*/
- ldr r3, .saved_mckr
- tst r3, #AT91_PMC_PRES
+ ldr tmp1, .saved_mckr
+ tst tmp1, #AT91_PMC_PRES
beq 2f
- and r3, r3, #AT91_PMC_PRES
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+ and tmp1, tmp1, #AT91_PMC_PRES
+ str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
#endif
@@ -256,32 +272,45 @@
/*
* Restore master clock setting
*/
-2: ldr r3, .saved_mckr
- str r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+2: ldr tmp1, .saved_mckr
+ str tmp1, [pmc, #AT91_PMC_MCKR]
wait_mckrdy
-#ifdef CONFIG_ARCH_AT91RM9200
- /* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
+ /*
+ * at91rm9200 Memory controller
+ * Do nothing - self-refresh is automatically disabled.
+ */
+ cmp memctrl, #AT91_MEMCTRL_MC
+ beq ram_restored
+
+ /*
+ * DDRSDR Memory controller
+ */
+ cmp memctrl, #AT91_MEMCTRL_DDRSDR
+ bne sdr_en_restore
/* Restore LPR on AT91 with DDRAM */
- ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_DDRSDRC_LPR]
+ ldr tmp1, .saved_sam9_lpr
+ str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
/* if we use the second ram controller */
- cmp r5, #0
- ldrne r4, .saved_sam9_lpr1
- strne r4, [r5, #AT91_DDRSDRC_LPR]
+ cmp ramc1, #0
+ ldrne tmp2, .saved_sam9_lpr1
+ strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-#else
+ b ram_restored
+
+ /*
+ * SDRAMC Memory controller
+ */
+sdr_en_restore:
/* Restore LPR on AT91 with SDRAM */
- ldr r3, .saved_sam9_lpr
- str r3, [r2, #AT91_SDRAMC_LPR]
-#endif
+ ldr tmp1, .saved_sam9_lpr
+ str tmp1, [sdramc, #AT91_SDRAMC_LPR]
+ram_restored:
/* Restore registers, and return */
- ldmfd sp!, {r0 - r12, pc}
+ ldmfd sp!, {r4 - r12, pc}
.saved_mckr:
@@ -299,27 +328,5 @@
.saved_sam9_lpr1:
.word 0
-.at91_va_base_pmc:
- .word AT91_VA_BASE_SYS + AT91_PMC
-
-#ifdef CONFIG_ARCH_AT91RM9200
-.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
-.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS + AT91_DDRSDRC0
-#else
-.at91_va_base_sdramc:
- .word AT91_VA_BASE_SYS + AT91_SDRAMC0
-#endif
-
-.at91_va_base_ramc1:
-#if defined(CONFIG_ARCH_AT91SAM9G45)
- .word AT91_VA_BASE_SYS + AT91_DDRSDRC1
-#else
- .word 0
-#endif
-
ENTRY(at91_slow_clock_sz)
.word .-at91_slow_clock
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 8294783..99a0a1d 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -2,6 +2,7 @@
* linux/arch/arm/mach-at91/sam9_smc.c
*
* Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,7 +23,22 @@
static void __iomem *smc_base_addr[2];
-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ __raw_writel(config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles),
+ base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+ struct sam9_smc_config *config)
{
/* Setup register */
@@ -45,16 +61,66 @@
base + AT91_SMC_CYCLE);
/* Mode register */
- __raw_writel(config->mode
- | AT91_SMC_TDF_(config->tdf_cycles),
- base + AT91_SMC_MODE);
+ sam9_smc_cs_write_mode(base, config);
}
-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+ struct sam9_smc_config *config)
{
sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
}
+static void sam9_smc_cs_read_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+ config->mode = (val & ~AT91_SMC_NWECYCLE);
+ config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val;
+
+ /* Setup register */
+ val = __raw_readl(base + AT91_SMC_SETUP);
+
+ config->nwe_setup = val & AT91_SMC_NWESETUP;
+ config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+ config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+ config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+ /* Pulse register */
+ val = __raw_readl(base + AT91_SMC_PULSE);
+
+ config->nwe_setup = val & AT91_SMC_NWEPULSE;
+ config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+ config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+ config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+ /* Cycle register */
+ val = __raw_readl(base + AT91_SMC_CYCLE);
+
+ config->write_cycle = val & AT91_SMC_NWECYCLE;
+ config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+ /* Mode register */
+ sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
void __init at91sam9_ioremap_smc(int id, u32 addr)
{
if (id > 1) {
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
index 039c5ce..3e52dcd4 100644
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -8,27 +8,4 @@
* published by the Free Software Foundation.
*/
-struct sam9_smc_config {
- /* Setup register */
- u8 ncs_read_setup;
- u8 nrd_setup;
- u8 ncs_write_setup;
- u8 nwe_setup;
-
- /* Pulse register */
- u8 ncs_read_pulse;
- u8 nrd_pulse;
- u8 ncs_write_pulse;
- u8 nwe_pulse;
-
- /* Cycle register */
- u16 read_cycle;
- u16 write_cycle;
-
- /* Mode register */
- u32 mode;
- u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 69d3fc4..372396c 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -86,20 +86,6 @@
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
- case ARCH_ID_AT91CAP9: {
-#ifdef CONFIG_AT91_PMC_UNIT
- u32 pmc_ver = at91_sys_read(AT91_PMC_VER);
-
- if (pmc_ver == ARCH_REVISION_CAP9_B)
- at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B;
- else if (pmc_ver == ARCH_REVISION_CAP9_C)
- at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C;
-#endif
- at91_soc_initdata.type = AT91_SOC_CAP9;
- at91_boot_soc = at91cap9_soc;
- break;
- }
-
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
at91_boot_soc = at91rm9200_soc;
@@ -200,7 +186,6 @@
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
- [AT91_SOC_CAP9] = "at91cap9",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
@@ -221,8 +206,6 @@
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
- [AT91_SOC_CAP9_REV_B] = "at91cap9 revB",
- [AT91_SOC_CAP9_REV_C] = "at91cap9 revC",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
@@ -293,6 +276,15 @@
panic("Impossible to ioremap at91_rstc_base\n");
}
+void __iomem *at91_matrix_base;
+
+void __init at91_ioremap_matrix(u32 base_addr)
+{
+ at91_matrix_base = ioremap(base_addr, 512);
+ if (!at91_matrix_base)
+ panic("Impossible to ioremap at91_matrix_base\n");
+}
+
void __init at91_initialize(unsigned long main_clock)
{
at91_boot_soc.ioremap_registers();
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 4588ae6..5db4aa4 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -13,7 +13,6 @@
};
extern struct at91_init_soc at91_boot_soc;
-extern struct at91_init_soc at91cap9_soc;
extern struct at91_init_soc at91rm9200_soc;
extern struct at91_init_soc at91sam9260_soc;
extern struct at91_init_soc at91sam9261_soc;
@@ -27,10 +26,6 @@
return at91_boot_soc.init != NULL;
}
-#if !defined(CONFIG_ARCH_AT91CAP9)
-#define at91cap9_soc at91_boot_soc
-#endif
-
#if !defined(CONFIG_ARCH_AT91RM9200)
#define at91rm9200_soc at91_boot_soc
#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 6b67b7e..22e4e0a 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,27 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
-#define AMBA_DEVICE(name, initname, base, plat, size) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = initname, \
- .platform_data = plat \
- }, \
- .res = { \
- .start = MM_ADDR_IO_##base, \
- .end = MM_ADDR_IO_##base + (size) - 1, \
- .flags = IORESOURCE_MEM \
- }, \
- .dma_mask = ~0, \
- .irq = { \
- IRQ_##base \
- } \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static struct clk pll1_clk = {
.name = "PLL1",
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
deleted file mode 100644
index cb78250..0000000
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index ab1711b..8736c1a 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -225,3 +225,19 @@
{
soft_restart(0);
}
+
+static void clps711x_idle(void)
+{
+ clps_writel(1, HALT);
+ __asm__ __volatile__(
+ "mov r0, r0\n\
+ mov r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+ arm_pm_idle = clps711x_idle;
+ return 0;
+}
+
+arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
deleted file mode 100644
index 23d6ef8..0000000
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/system.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
- clps_writel(1, HALT);
- __asm__ __volatile__(
- "mov r0, r0\n\
- mov r0, r0");
-}
-
-#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
deleted file mode 100644
index 9e56b7d..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
deleted file mode 100644
index fcb7a01..0000000
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index dd1429ae..bda7aca 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -28,6 +28,7 @@
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
@@ -71,7 +72,7 @@
****************************************************************************/
void __init dove_ehci0_init(void)
{
- orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+ orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
}
/*****************************************************************************
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
deleted file mode 100644
index 3027954..0000000
--- a/arch/arm/mach-dove/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 294aad0..804c912 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -271,8 +271,33 @@
&am79c961_device,
};
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+ const char *irq_stat = (char *)0xff000000;
+
+ /* disable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+ /* wait for an interrupt to occur */
+ while (!*irq_stat);
+
+ /* enable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
static int __init ebsa110_init(void)
{
+ arm_pm_idle = ebsa110_idle;
return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
}
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
deleted file mode 100644
index 2e4af65..0000000
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/system.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 24203f9..903edb0 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -279,48 +279,14 @@
.set_mctrl = ep93xx_uart_set_mctrl,
};
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "apb:uart1",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART1_PHYS_BASE,
- .end = EP93XX_UART1_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART1, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+ { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-static struct amba_device uart2_device = {
- .dev = {
- .init_name = "apb:uart2",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART2_PHYS_BASE,
- .end = EP93XX_UART2_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART2, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+ { IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
-static struct amba_device uart3_device = {
- .dev = {
- .init_name = "apb:uart3",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART3_PHYS_BASE,
- .end = EP93XX_UART3_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART3, NO_IRQ },
- .periphid = 0x00041010,
-};
-
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+ { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
static struct resource ep93xx_rtc_resource[] = {
{
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
deleted file mode 100644
index b5bec7c..0000000
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 03dd401..d5fb44f 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -32,6 +32,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -153,7 +154,6 @@
}, {
I2C_BOARD_INFO("pca9539", 0x74),
.platform_data = &pca953x_74_gpio_data,
- .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
}, {
I2C_BOARD_INFO("pca9539", 0x75),
.platform_data = &pca953x_75_gpio_data,
@@ -348,6 +348,8 @@
"pca9539:74"))
pr_warn("cannot request interrupt gpio for pca9539:74\n");
+ vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index a5823a7..13312cc 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -32,6 +32,7 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
@@ -42,6 +43,7 @@
SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
};
+#endif
static struct clksrc_clk *sysclks[] = {
/* nothing here yet */
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 26a668b..48af285 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -32,12 +32,14 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
};
+#endif
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 5a8c42e..187287a 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -30,6 +30,7 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@@ -93,6 +94,7 @@
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
};
+#endif
struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 6de298c..93fa2d53 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -201,14 +201,6 @@
},
};
-static void exynos_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -467,10 +459,6 @@
int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = exynos_idle;
-
return device_register(&exynos4_dev);
}
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index b10fcd2..91370de 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -74,21 +74,8 @@
.peri_id = pdma0_peri,
};
-struct amba_device exynos4_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma0_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0,
+ {IRQ_PDMA0}, &exynos4_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_PCM0_RX,
@@ -123,21 +110,8 @@
.peri_id = pdma1_peri,
};
-struct amba_device exynos4_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma1_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1,
+ {IRQ_PDMA1}, &exynos4_pdma1_pdata);
static int __init exynos4_dma_init(void)
{
@@ -146,11 +120,11 @@
dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+ amba_device_register(&exynos4_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+ amba_device_register(&exynos4_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
deleted file mode 100644
index 0063a6d..0000000
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 85fa027..e6b02fd 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -15,11 +15,13 @@
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
+
+#include "common.h"
/*
* The following lookup table is used to override device names when devices
@@ -60,7 +62,7 @@
static void __init exynos4210_dt_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
}
@@ -79,7 +81,9 @@
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.init_irq = exynos4_init_irq,
.map_io = exynos4210_dt_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = exynos4210_dt_machine_init,
.timer = &exynos4_timer,
.dt_compat = exynos4210_dt_compat,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b895ec0..435261f 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -220,14 +220,14 @@
.lower_margin = 1,
.hsync_len = 48,
.vsync_len = 3,
- .xres = 1280,
- .yres = 800,
+ .xres = 1024,
+ .yres = 600,
.refresh = 60,
},
.max_bpp = 24,
.default_bpp = 16,
- .virtual_x = 1280,
- .virtual_y = 800,
+ .virtual_x = 1024,
+ .virtual_y = 2 * 600,
};
static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 37ac93e..0fc65ff 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -910,7 +910,7 @@
.bus_type = FIMC_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
- .clk_frequency = 21600000UL,
+ .clk_frequency = 24000000UL,
.csi_data_align = 32,
},
};
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index a4f61a4..e190130 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -206,7 +206,7 @@
}
-static int exynos4_pm_add(struct device *dev)
+static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = exynos4_pm_prepare;
pm_cpu_sleep = exynos4_cpu_suspend;
@@ -384,7 +384,9 @@
exynos4_restore_pll();
+#ifdef CONFIG_SMP
scu_enable(S5P_VA_SCU);
+#endif
#ifdef CONFIG_CACHE_L2X0
s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
deleted file mode 100644
index a174a58..0000000
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index c5b24b9..7355c0b 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := irq.o mm.o time.o devices.o gpio.o
+obj-y := irq.o mm.o time.o devices.o gpio.o idle.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
new file mode 100644
index 0000000..92bbd6b
--- /dev/null
+++ b/arch/arm/mach-gemini/idle.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+ /*
+ * Because of broken hardware we have to enable interrupts or the CPU
+ * will never wakeup... Acctualy it is not very good to enable
+ * interrupts first since scheduler can miss a tick, but there is
+ * no other way around this. Platforms that needs it for power saving
+ * should call enable_hlt() in init code, since by default it is
+ * disabled.
+ */
+ local_irq_enable();
+ cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+ arm_pm_idle = gemini_idle;
+ return 0;
+}
+
+arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
index 4d9c1f8..a33b5a1 100644
--- a/arch/arm/mach-gemini/include/mach/system.h
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -14,20 +14,6 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
-static inline void arch_idle(void)
-{
- /*
- * Because of broken hardware we have to enable interrupts or the CPU
- * will never wakeup... Acctualy it is not very good to enable
- * interrupts here since scheduler can miss a tick, but there is
- * no other way around this. Platforms that needs it for power saving
- * should call enable_hlt() in init code, since by default it is
- * disabled.
- */
- local_irq_enable();
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 9485a8f..ca70e5f 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -73,8 +73,8 @@
unsigned int i, mode = 0, level = 0;
/*
- * Disable arch_idle() by default since it is buggy
- * For more info see arch/arm/mach-gemini/include/mach/system.h
+ * Disable the idle handler by default since it is buggy
+ * For more info see arch/arm/mach-gemini/idle.c
*/
disable_hlt();
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index f8a2f6b..e756d1a 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -247,3 +247,21 @@
{
CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
}
+
+static void h720x__idle(void)
+{
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+ nop();
+ nop();
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+ nop();
+ nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+ arm_pm_idle = h720x__idle;
+ return 0;
+}
+
+arch_initcall(h720x_idle_init);
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
deleted file mode 100644
index 16ac46e..0000000
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
- nop();
- nop();
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
- nop();
- nop();
-}
-
-#endif
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
deleted file mode 100644
index b1d8b5f..0000000
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 6dfdbcc..3851d8a 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -38,5 +38,8 @@
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
+dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
+dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
+ imx53-qsb.dtb imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
imx6q-sabrelite.dtb
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 1e03ef4..5cca573 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -104,6 +104,7 @@
static const char *imx51_dt_board_compat[] __initdata = {
"fsl,imx51-babbage",
+ "fsl,imx51",
NULL
};
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index fd5be0f..4172279 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -114,6 +114,7 @@
"fsl,imx53-evk",
"fsl,imx53-qsb",
"fsl,imx53-smd",
+ "fsl,imx53",
NULL
};
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 6075d4d..379b1a9 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -129,6 +129,7 @@
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-arm2",
"fsl,imx6q-sabrelite",
+ "fsl,imx6q",
NULL,
};
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 31807d2..8404ee7 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,31 +34,29 @@
{
unsigned long reg = 0;
- if (!need_resched())
- __asm__ __volatile__(
- /* disable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #0x00001000\n"
- "bic %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- /* invalidate I cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c5, 0\n"
- /* clear and invalidate D cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c14, 0\n"
- /* WFI */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c0, 4\n"
- "nop\n" "nop\n" "nop\n" "nop\n"
- "nop\n" "nop\n" "nop\n"
- /* enable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- : "=r" (reg));
- local_irq_enable();
+ __asm__ __volatile__(
+ /* disable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #0x00001000\n"
+ "bic %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ /* invalidate I cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c5, 0\n"
+ /* clear and invalidate D cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c14, 0\n"
+ /* WFI */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c0, 4\n"
+ "nop\n" "nop\n" "nop\n" "nop\n"
+ "nop\n" "nop\n" "nop\n"
+ /* enable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #0x00001000\n"
+ "orr %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : "=r" (reg));
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
+ arm_pm_idle = imx3_idle;
}
void __init mx31_init_irq(void)
@@ -197,7 +195,7 @@
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
+ arm_pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index bc17dfe..49549a7 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -26,23 +26,17 @@
static void imx5_idle(void)
{
- if (!need_resched()) {
- /* gpc clock is needed for SRPG */
- if (gpc_dvfs_clk == NULL) {
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (IS_ERR(gpc_dvfs_clk))
- goto err0;
- }
- clk_enable(gpc_dvfs_clk);
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (tzic_enable_wake())
- goto err1;
- cpu_do_idle();
-err1:
- clk_disable(gpc_dvfs_clk);
+ /* gpc clock is needed for SRPG */
+ if (gpc_dvfs_clk == NULL) {
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (IS_ERR(gpc_dvfs_clk))
+ return;
}
-err0:
- local_irq_enable();
+ clk_enable(gpc_dvfs_clk);
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (tzic_enable_wake() != 0)
+ cpu_do_idle();
+ clk_disable(gpc_dvfs_clk);
}
/*
@@ -108,7 +102,7 @@
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- pm_idle = imx5_idle;
+ arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index e455d2f..6fcffa7 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
#include <mach/hardware.h>
static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@
cscr &= 0xFFFFFFFC;
__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
/* Executes WFI */
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 019f0ab..15b87f2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -35,67 +35,23 @@
static struct amba_pl010_data integrator_uart_data;
-static struct amba_device rtc_device = {
- .dev = {
- .init_name = "mb:15",
- },
- .res = {
- .start = INTEGRATOR_RTC_BASE,
- .end = INTEGRATOR_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
+#define KMI0_IRQ { IRQ_KMIINT0 }
+#define KMI1_IRQ { IRQ_KMIINT1 }
-static struct amba_device uart0_device = {
- .dev = {
- .init_name = "mb:16",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART0_BASE,
- .end = INTEGRATOR_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+ INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "mb:17",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART1_BASE,
- .end = INTEGRATOR_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+ INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
-static struct amba_device kmi0_device = {
- .dev = {
- .init_name = "mb:18",
- },
- .res = {
- .start = KMI0_BASE,
- .end = KMI0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+ INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
-static struct amba_device kmi1_device = {
- .dev = {
- .init_name = "mb:19",
- },
- .res = {
- .start = KMI1_BASE,
- .end = KMI1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 8cbb75a..3e538da 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -401,24 +401,21 @@
pc_base = dev->resource.start + idev->offset;
- d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+ d = amba_device_alloc(NULL, pc_base, SZ_4K);
if (!d)
continue;
dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d->dev.parent = &dev->dev;
- d->res.start = dev->resource.start + idev->offset;
- d->res.end = d->res.start + SZ_4K - 1;
- d->res.flags = IORESOURCE_MEM;
d->irq[0] = dev->irq;
d->irq[1] = dev->irq;
d->periphid = idev->id;
d->dev.platform_data = idev->platform_data;
- ret = amba_device_register(d, &dev->resource);
+ ret = amba_device_add(d, &dev->resource);
if (ret) {
dev_err(&d->dev, "unable to register device: %d\n", ret);
- kfree(d);
+ amba_device_put(d);
}
}
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
deleted file mode 100644
index 901514e..0000000
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8b6aa6..be9ead4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -347,32 +347,14 @@
.gpio_cd = -1,
};
-static struct amba_device mmc_device = {
- .dev = {
- .init_name = "mb:1c",
- .platform_data = &mmc_data,
- },
- .res = {
- .start = INTEGRATOR_CP_MMC_BASE,
- .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
- .periphid = 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
-static struct amba_device aaci_device = {
- .dev = {
- .init_name = "mb:1d",
- },
- .res = {
- .start = INTEGRATOR_CP_AACI_BASE,
- .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_AACIINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+ INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+ INTEGRATOR_CP_AACI_IRQS, NULL);
/*
@@ -425,21 +407,8 @@
.remove = versatile_clcd_remove_dma,
};
-static struct amba_device clcd_device = {
- .dev = {
- .init_name = "mb:c0",
- .coherent_dma_mask = ~0,
- .platform_data = &clcd_data,
- },
- .res = {
- .start = INTCP_PA_CLCD_BASE,
- .end = INTCP_PA_CLCD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = { IRQ_CP_CLCDCINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+ { IRQ_CP_CLCDCINT }, &clcd_data);
static struct amba_device *amba_devs[] __initdata = {
&mmc_device,
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
deleted file mode 100644
index 1f31ed3..0000000
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
deleted file mode 100644
index 4a88727..0000000
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
deleted file mode 100644
index 4f98e76..0000000
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
deleted file mode 100644
index a7fb08b..0000000
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 0923bb9..7c1495e 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -441,6 +441,9 @@
void __init ixp23xx_sys_init(void)
{
+ /* by default, the idle code is disabled */
+ disable_hlt();
+
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
deleted file mode 100644
index 277dda7..0000000
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
- if (!hlt_counter)
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3841ab4..a6329a0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -236,6 +236,12 @@
{
int i = 0;
+ /*
+ * ixp4xx does not implement the XScale PWRMODE register
+ * so it must not call cpu_do_idle().
+ */
+ disable_hlt();
+
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
deleted file mode 100644
index 140a9be..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
- /* ixp4xx does not implement the XScale PWRMODE register,
- * so it must not call cpu_do_idle() here.
- */
-#if 0
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index cc15426..77d4852 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -27,6 +27,7 @@
#include <plat/cache-feroceon-l2.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
@@ -73,7 +74,7 @@
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+ orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
}
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
deleted file mode 100644
index 5fddde0..0000000
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e8fda45..d5a0d1d 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -31,314 +31,314 @@
#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP_MAX 49
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
deleted file mode 100644
index 59fe992..0000000
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks,
- */
- cpu_do_idle();
-
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
deleted file mode 100644
index bf176c9..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index bfee5b4..5d51c10 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -149,20 +149,8 @@
.remove = lpc32xx_clcd_remove,
};
-static struct amba_device lpc32xx_clcd_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:clcd",
- .platform_data = &lpc32xx_clcd_data,
- },
- .res = {
- .start = LPC32XX_LCD_BASE,
- .end = (LPC32XX_LCD_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+ LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
/*
* AMBA SSP (SPI)
@@ -191,20 +179,8 @@
.enable_dma = 0,
};
-static struct amba_device lpc32xx_ssp0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:ssp0",
- .platform_data = &lpc32xx_ssp0_data,
- },
- .res = {
- .start = LPC32XX_SSP0_BASE,
- .end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+ LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
/* AT25 driver registration */
static int __init phy3250_spi_board_register(void)
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
deleted file mode 100644
index 1d001ea..0000000
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
deleted file mode 100644
index 6a94f05..0000000
--- a/arch/arm/mach-msm/idle.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-msm/include/mach/idle.S
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(arch_idle)
-#ifdef CONFIG_MSM7X00A_IDLE
- mrc p15, 0, r1, c1, c0, 0 /* read current CR */
- bic r0, r1, #(1 << 2) /* clear dcache bit */
- bic r0, r0, #(1 << 12) /* clear icache bit */
- mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
-
- mov r0, #0 /* prepare wfi value */
- mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
- mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
- mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
-
- mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
-#endif
- mov pc, lr
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
new file mode 100644
index 0000000..0c9e13c
--- /dev/null
+++ b/arch/arm/mach-msm/idle.c
@@ -0,0 +1,49 @@
+/* arch/arm/mach-msm/idle.c
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+
+static void msm_idle(void)
+{
+#ifdef CONFIG_MSM7X00A_IDLE
+ asm volatile (
+
+ "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t"
+ "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t"
+ "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t"
+
+ "mov r0, #0 /* prepare wfi value */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t"
+ "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t"
+
+ "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t"
+
+ : : : "r0","r1" );
+#endif
+}
+
+static int __init msm_idle_init(void)
+{
+ arm_pm_idle = msm_idle;
+ return 0;
+}
+
+arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index 311db2b..f5fb2ec 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,7 +12,6 @@
* GNU General Public License for more details.
*
*/
-void arch_idle(void);
/* low level hardware reset hook -- for example, hitting the
* PSHOLD line on the PMIC to hard reset the system
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 0cdd410..a5dcf766 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -19,6 +19,7 @@
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
@@ -169,7 +170,7 @@
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
{
- orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
+ orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
}
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
deleted file mode 100644
index 8c3a538..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
index b61b509..3752302 100644
--- a/arch/arm/mach-mv78xx0/mpp.h
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -24,296 +24,296 @@
#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1)
#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1)
-#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1)
-#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1)
+#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1)
+#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1)
#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1)
#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1)
-#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1)
-#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1)
+#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1)
+#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1)
#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1)
#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1)
-#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1)
-#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1)
+#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1)
+#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1)
#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1)
#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1)
-#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1)
-#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1)
+#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1)
+#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1)
#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1)
#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1)
-#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1)
-#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1)
+#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1)
+#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1)
#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1)
#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1)
-#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1)
-#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1)
+#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1)
+#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1)
#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1)
#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1)
-#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1)
-#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1)
+#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1)
+#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1)
#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1)
#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1)
-#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1)
-#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1)
+#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1)
+#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1)
#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1)
#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1)
-#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1)
-#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1)
+#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1)
+#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1)
#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1)
#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1)
-#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1)
-#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1)
+#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1)
+#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1)
#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1)
#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1)
-#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1)
-#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1)
+#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1)
+#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1)
#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1)
#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1)
-#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1)
-#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1)
+#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1)
+#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1)
#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1)
#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1)
-#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1)
-#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1)
-#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1)
-#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1)
+#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1)
+#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1)
+#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1)
+#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1)
#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1)
#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1)
-#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1)
-#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1)
-#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1)
-#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1)
+#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1)
+#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1)
+#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1)
+#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1)
#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1)
#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1)
-#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1)
-#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1)
-#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1)
-#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1)
+#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1)
+#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1)
+#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1)
+#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1)
#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1)
#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1)
-#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1)
-#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1)
-#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1)
-#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1)
+#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1)
+#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1)
+#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1)
+#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1)
#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1)
#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1)
-#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1)
-#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1)
-#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1)
-#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1)
+#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1)
+#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1)
+#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1)
+#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1)
#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1)
#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1)
-#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1)
-#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1)
-#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1)
-#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1)
+#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1)
+#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1)
+#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1)
+#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1)
#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1)
#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1)
-#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1)
-#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1)
+#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1)
#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1)
#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1)
-#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1)
-#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1)
+#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1)
#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1)
#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1)
-#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1)
-#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1)
+#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0)
#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1)
#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1)
-#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1)
-#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1)
+#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0)
#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1)
#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1)
-#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1)
-#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1)
-#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1)
+#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1)
+#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1)
#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1)
#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1)
-#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1)
-#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1)
-#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1)
+#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1)
+#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1)
#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1)
#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1)
-#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1)
-#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1)
+#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1)
#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1)
#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1)
-#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1)
-#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1)
+#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1)
#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1)
#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1)
-#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1)
-#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1)
+#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1)
#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1)
#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1)
-#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1)
-#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1)
+#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1)
#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1)
#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1)
-#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1)
-#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1)
+#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1)
#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1)
#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1)
-#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1)
-#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1)
-#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1)
+#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1)
+#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1)
#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1)
#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1)
-#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1)
#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1)
#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1)
-#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1)
-#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1)
+#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1)
#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1)
#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1)
-#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1)
-#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1)
-#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1)
+#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1)
+#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1)
#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1)
#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1)
-#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1)
-#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1)
+#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1)
#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1)
#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1)
-#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1)
-#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1)
+#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1)
#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1)
#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1)
-#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1)
-#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1)
+#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1)
#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1)
#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1)
-#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1)
-#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1)
-#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1)
+#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1)
+#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1)
#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1)
#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1)
-#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1)
-#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1)
-#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1)
-#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1)
+#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1)
+#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1)
+#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1)
#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1)
#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1)
-#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1)
-#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1)
-#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1)
-#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1)
+#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1)
+#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1)
+#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1)
#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1)
#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1)
-#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1)
-#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1)
-#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1)
-#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1)
+#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1)
+#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1)
+#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1)
#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1)
#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1)
-#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1)
+#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1)
#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1)
#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1)
-#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1)
+#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1)
#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1)
#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1)
-#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1)
+#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1)
#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1)
#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1)
-#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1)
+#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1)
#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1)
#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1)
-#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1)
+#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1)
#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1)
#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1)
-#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1)
-#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1)
+#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1)
+#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1)
#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1)
#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1)
-#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1)
+#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1)
#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1)
@@ -323,14 +323,14 @@
#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1)
-#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1)
+#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1)
#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1)
#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1)
-#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1)
-#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1)
+#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1)
+#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1)
#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1)
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index fe3e847..01faffe 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -77,16 +77,18 @@
int __init mxs_add_amba_device(const struct amba_device *dev)
{
- struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+ struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+ dev->res.start, resource_size(&dev->res));
if (!adev) {
pr_err("%s: failed to allocate memory", __func__);
return -ENOMEM;
}
- *adev = *dev;
+ adev->irq[0] = dev->irq[0];
+ adev->irq[1] = dev->irq[1];
- return amba_device_register(adev, &iomem_resource);
+ return amba_device_add(adev, &iomem_resource);
}
struct device mxs_apbh_bus = {
diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c
index a559db0..a5479f7 100644
--- a/arch/arm/mach-mxs/devices/amba-duart.c
+++ b/arch/arm/mach-mxs/devices/amba-duart.c
@@ -23,7 +23,7 @@
.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \
.flags = IORESOURCE_MEM, \
}, \
- .irq = {soc ## _INT_DUART, NO_IRQ}, \
+ .irq = {soc ## _INT_DUART}, \
}
#ifdef CONFIG_SOC_IMX23
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
deleted file mode 100644
index e7ad1bb..0000000
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index fb042da..a9b4bbc 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,13 +15,12 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
static int mxs_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index b991323..2cdf6ef 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -92,18 +92,7 @@
{
}
-static struct amba_device fb_device = {
- .dev = {
- .init_name = "fb",
- .coherent_dma_mask = ~0,
- },
- .res = {
- .start = 0x00104000,
- .end = 0x00104fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
{
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
deleted file mode 100644
index b38fa36..0000000
--- a/arch/arm/mach-netx/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
-
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 7c878bf..f6f74ad 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -185,20 +185,11 @@
#endif
}
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+ { IRQ_UART0 }, NULL);
-static struct amba_device uart0_device = {
- .dev = { .init_name = "uart0" },
- __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
- .irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
- .dev = { .init_name = "uart1" },
- __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
- .irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+ { IRQ_UART1 }, NULL);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 65df7b4..27f43a4 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -97,12 +97,7 @@
GPIO_DEVICE(3),
};
-static struct amba_device cpu8815_amba_rng = {
- .dev = {
- .init_name = "rng",
- },
- __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
static struct platform_device *platform_devs[] __initdata = {
cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@
};
static struct amba_device *amba_devs[] __initdata = {
- &cpu8815_amba_rng
+ &cpu8815_amba_rng_device
};
static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
deleted file mode 100644
index 25e198b..0000000
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * mach-nomadik/include/mach/system.h
- *
- * Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
deleted file mode 100644
index a6c1b3a..0000000
--- a/arch/arm/mach-omap1/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 89ea20c..0c2c366 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -42,9 +42,9 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
-#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -108,13 +108,7 @@
__u32 use_idlect1 = arm_idlect1_mask;
int do_sleep = 0;
- local_irq_disable();
local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
#warning Enable 32kHz OS timer in order to allow sleep states in idle
@@ -157,14 +151,12 @@
omap_writel(saved_idlect1, ARM_IDLECT1);
local_fiq_enable();
- local_irq_enable();
return;
}
omap_sram_suspend(omap_readl(ARM_IDLECT1),
omap_readl(ARM_IDLECT2));
local_fiq_enable();
- local_irq_enable();
}
/*
@@ -583,8 +575,6 @@
#endif /* DEBUG && CONFIG_PROC_FS */
-static void (*saved_idle)(void) = NULL;
-
/*
* omap_pm_prepare - Do preliminary suspend work.
*
@@ -592,8 +582,7 @@
static int omap_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
+ disable_hlt();
return 0;
}
@@ -630,7 +619,7 @@
static void omap_pm_finish(void)
{
- pm_idle = saved_idle;
+ enable_hlt();
}
@@ -687,7 +676,7 @@
return -ENODEV;
}
- pm_idle = omap1_pm_idle;
+ arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index d965da4..72ce50e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -117,7 +117,6 @@
config MACH_OMAP_GENERIC
bool "Generic OMAP2+ board"
depends on ARCH_OMAP2PLUS
- select USE_OF
default y
help
Support for generic TI OMAP2+ boards using Flattened Device Tree.
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fc9b238..bd76394 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -11,9 +11,9 @@
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
-secure-common = omap-smc.o omap-secure.o
+secure-common = omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e921e3b..d73316e 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -437,7 +437,7 @@
.reset_gpio_port[2] = -EINVAL
};
-static void cm_t35_init_usbh(void)
+static void __init cm_t35_init_usbh(void)
{
int err;
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 00b1d02..02d7e82 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -17,6 +17,7 @@
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
@@ -90,18 +91,18 @@
}
#endif
-#if defined(CONFIG_SOC_OMAP2420)
+#ifdef CONFIG_SOC_OMAP2420
static const char *omap242x_boards_compat[] __initdata = {
"ti,omap2420",
NULL,
};
DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
@@ -109,14 +110,13 @@
MACHINE_END
#endif
-#if defined(CONFIG_SOC_OMAP2430)
+#ifdef CONFIG_SOC_OMAP2430
static const char *omap243x_boards_compat[] __initdata = {
"ti,omap2430",
NULL,
};
DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
@@ -129,18 +129,18 @@
MACHINE_END
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_ARCH_OMAP3
static const char *omap3_boards_compat[] __initdata = {
"ti,omap3",
NULL,
};
DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
@@ -148,18 +148,18 @@
MACHINE_END
#endif
-#if defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP4
static const char *omap4_boards_compat[] __initdata = {
"ti,omap4",
NULL,
};
DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index 9c442e2..ce91aad 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -30,29 +30,8 @@
#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000)
#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000)
-static struct amba_device omap3_etb_device = {
- .dev = {
- .init_name = "etb",
- },
- .res = {
- .start = ETB_BASE,
- .end = ETB_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x000bb907,
-};
-
-static struct amba_device omap3_etm_device = {
- .dev = {
- .init_name = "etm",
- },
- .res = {
- .start = ETM_BASE,
- .end = ETM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x102bb921,
-};
+static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
+static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
static int __init emu_init(void)
{
@@ -66,4 +45,3 @@
}
subsys_initcall(emu_init);
-
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
deleted file mode 100644
index d488721..0000000
--- a/arch/arm/mach-omap2/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1881fe9..ad4f693 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -227,6 +227,14 @@
static int __init omap2_common_pm_late_init(void)
{
+ /*
+ * In the case of DT, the PMIC and SR initialization will be done using
+ * a completely different mechanism.
+ * Disable this part if a DT blob is available.
+ */
+ if (of_have_populated_dt())
+ return 0;
+
/* Init the voltage layer */
omap_pmic_late_init();
omap_voltage_late_init();
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index b8822f8..a4eb5c2 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -82,13 +82,7 @@
f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- /* Ignore UART clocks. These are handled by UART core (serial.c) */
- f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
- f2 &= ~OMAP24XX_EN_UART3_MASK;
-
- if (f1 | f2)
- return 1;
- return 0;
+ return (f1 | f2) ? 1 : 0;
}
static void omap2_enter_full_retention(void)
@@ -232,7 +226,6 @@
static void omap2_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
if (!omap2_can_sleep()) {
@@ -249,7 +242,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -468,7 +460,7 @@
}
suspend_set_ops(&omap_pm_ops);
- pm_idle = omap2_pm_idle;
+ arm_pm_idle = omap2_pm_idle;
return 0;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fc69875..b77df73 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -418,10 +418,9 @@
static void omap3_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
- if (omap_irq_pending() || need_resched())
+ if (omap_irq_pending())
goto out;
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
@@ -434,7 +433,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -848,7 +846,7 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- pm_idle = omap3_pm_idle;
+ arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
/*
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index c264ef7..c840689 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -173,18 +173,16 @@
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
* by secondary CPU with CONFIG_CPUIDLE.
*/
static void omap_default_idle(void)
{
- local_irq_disable();
local_fiq_disable();
omap_do_wfi();
local_fiq_enable();
- local_irq_enable();
}
/**
@@ -255,8 +253,8 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- /* Overwrite the default arch_idle() */
- pm_idle = omap_default_idle;
+ /* Overwrite the default cpu_do_idle() */
+ arm_pm_idle = omap_default_idle;
omap4_idle_init();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 860118a..873b51d 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <mach/system.h>
#include <plat/common.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index c005e2f..57db203 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -108,6 +108,7 @@
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
+#ifdef CONFIG_PM_OPP
if (cpu_is_omap3630()) {
omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@
omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
+#endif
if (cpu_is_omap3517() || cpu_is_omap3505())
voltdms = voltagedomains_am35xx;
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index 4e11d02..c3115f6 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -100,9 +100,11 @@
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
+#ifdef CONFIG_PM_OPP
omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
voltdm->sys_clk.name = sys_clk_name;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0e28bae2..5dad38e 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -29,6 +29,7 @@
#include <mach/hardware.h>
#include <mach/orion5x.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
@@ -72,7 +73,8 @@
****************************************************************************/
void __init orion5x_ehci0_init(void)
{
- orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
+ orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
+ EHCI_PHY_ORION);
}
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
deleted file mode 100644
index 825a265..0000000
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
deleted file mode 100644
index 1a5d8cb..0000000
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching and wait for interrupt
- * tricks.
- */
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
deleted file mode 100644
index 60cfe71..0000000
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
deleted file mode 100644
index 2c7d2a9..0000000
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/system.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
deleted file mode 100644
index c5afacd..0000000
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/system.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 735b57a..f8f2c0a 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -28,21 +28,11 @@
#include <asm/setup.h>
#include <asm/leds.h>
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = REALVIEW_##base##_BASE, \
- .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
struct machine_desc;
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 5c3c625..708f841 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16)
#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */
#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
@@ -73,7 +74,6 @@
#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-#define IRQ_PB1176_GPIO0 -1
#define IRQ_PB1176_SCTL -1
#define NR_GIC_PB1176 2
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
deleted file mode 100644
index 471b671..0000000
--- a/arch/arm/mach-realview/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9578145..157e1bc 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -135,63 +135,63 @@
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_EB_GPIO2 }
+#define GPIO3_IRQ { IRQ_EB_GPIO3 }
-#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_EB_AACI }
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_EB_KMI0 }
+#define KMI1_IRQ { IRQ_EB_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
+#define EB_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define EB_CLCD_IRQ { IRQ_EB_CLCD }
+#define DMAC_IRQ { IRQ_EB_DMA }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
-#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
+#define SCTL_IRQ { }
+#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
+#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 }
+#define GPIO1_IRQ { IRQ_EB_GPIO1 }
+#define EB_RTC_IRQ { IRQ_EB_RTC }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
-#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
-#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
-#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
-#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
-#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
+#define SCI_IRQ { IRQ_EB_SCI }
+#define EB_UART0_IRQ { IRQ_EB_UART0 }
+#define EB_UART1_IRQ { IRQ_EB_UART1 }
+#define EB_UART2_IRQ { IRQ_EB_UART2 }
+#define EB_UART3_IRQ { IRQ_EB_UART3 }
+#define EB_SSP_IRQ { IRQ_EB_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL);
-AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL);
+AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e4abe94..b1d7caf 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -132,50 +132,50 @@
/*
* RealView PB1176 AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB1176_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB1176_GPIO3 }
+#define AACI_IRQ { IRQ_PB1176_AACI }
#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ }
-#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ }
-#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ }
-#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PB1176_KMI0 }
+#define KMI1_IRQ { IRQ_PB1176_KMI1 }
+#define PB1176_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD }
+#define SCTL_IRQ { }
+#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG }
+#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB1176_GPIO1 }
+#define PB1176_RTC_IRQ { IRQ_DC1176_RTC }
+#define SCI_IRQ { IRQ_PB1176_SCI }
+#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 }
+#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 }
+#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 }
+#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 }
+#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 }
+#define PB1176_SSP_IRQ { IRQ_DC1176_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
-AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
-AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
+APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
+AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 2147335..ae7fe54 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -127,52 +127,52 @@
* RealView PB11MPCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 }
+#define AACI_IRQ { IRQ_TC11MP_AACI }
#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ }
-#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ }
-#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ }
-#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_TC11MP_KMI0 }
+#define KMI1_IRQ { IRQ_TC11MP_KMI1 }
+#define PB11MP_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD }
+#define DMAC_IRQ { IRQ_PB11MP_DMAC }
+#define SCTL_IRQ { }
+#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG }
+#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 }
+#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC }
+#define SCI_IRQ { IRQ_PB11MP_SCI }
+#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 }
+#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 }
+#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 }
+#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 }
+#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 25b2e59..5965017 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -122,52 +122,52 @@
* RealView PBA8Core AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBA8_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBA8_GPIO3 }
+#define AACI_IRQ { IRQ_PBA8_AACI }
#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
-#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
-#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
-#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBA8_KMI0 }
+#define KMI1_IRQ { IRQ_PBA8_KMI1 }
+#define PBA8_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD }
+#define DMAC_IRQ { IRQ_PBA8_DMAC }
+#define SCTL_IRQ { }
+#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG }
+#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBA8_GPIO1 }
+#define PBA8_RTC_IRQ { IRQ_PBA8_RTC }
+#define SCI_IRQ { IRQ_PBA8_SCI }
+#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 }
+#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 }
+#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 }
+#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 }
+#define PBA8_SSP_IRQ { IRQ_PBA8_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ac71564..1cd9956 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -144,52 +144,52 @@
* RealView PBXCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBX_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBX_GPIO3 }
+#define AACI_IRQ { IRQ_PBX_AACI }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
-#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
-#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
-#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
-#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBX_KMI0 }
+#define KMI1_IRQ { IRQ_PBX_KMI1 }
+#define PBX_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBX_CLCD_IRQ { IRQ_PBX_CLCD }
+#define DMAC_IRQ { IRQ_PBX_DMAC }
+#define SCTL_IRQ { }
+#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG }
+#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBX_GPIO1 }
+#define PBX_RTC_IRQ { IRQ_PBX_RTC }
+#define SCI_IRQ { IRQ_PBX_SCI }
+#define PBX_UART0_IRQ { IRQ_PBX_UART0 }
+#define PBX_UART1_IRQ { IRQ_PBX_UART1 }
+#define PBX_UART2_IRQ { IRQ_PBX_UART2 }
+#define PBX_UART3_IRQ { IRQ_PBX_UART3 }
+#define PBX_SSP_IRQ { IRQ_PBX_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
deleted file mode 100644
index 359bab9..0000000
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-rpc/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 7dc6c46..5404535 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -115,7 +115,8 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2410_cpufreq_add(struct device *dev)
+static int s3c2410_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
return s3c_cpufreq_register(&s3c2410_cpufreq_info);
}
@@ -133,7 +134,8 @@
arch_initcall(s3c2410_cpufreq_init);
-static int s3c2410a_cpufreq_add(struct device *dev)
+static int s3c2410a_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
/* alter the maximum freq settings for S3C2410A. If a board knows
* it only has a maximum of 200, then it should register its own
@@ -144,7 +146,7 @@
s3c2410_cpufreq_info.max.pclk = 66500000;
s3c2410_cpufreq_info.name = "s3c2410a";
- return s3c2410_cpufreq_add(dev);
+ return s3c2410_cpufreq_add(dev, sif);
}
static struct subsys_interface s3c2410a_cpufreq_interface = {
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 2afd000..4803338 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -132,7 +132,8 @@
},
};
-static int __init s3c2410_dma_add(struct device *dev)
+static int __init s3c2410_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2410_dma_order);
@@ -148,7 +149,7 @@
static int __init s3c2410_dma_drvinit(void)
{
- return subsys_interface_register(&s3c2410_interface);
+ return subsys_interface_register(&s3c2410_dma_interface);
}
arch_initcall(s3c2410_dma_drvinit);
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
deleted file mode 100644
index 5e215c1..0000000
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/idle.h>
-
-#include <mach/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-
-void s3c24xx_default_idle(void)
-{
- unsigned long tmp;
- int i;
-
- /* idle the system by using the idle mode which will wait for an
- * interrupt to happen before restarting the system.
- */
-
- /* Warning: going into idle state upsets jtag scanning */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-
- /* the samsung port seems to do a loop and then unset idle.. */
- for (i = 0; i < 50; i++) {
- tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
- }
-
- /* this bit is not cleared on re-start... */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
- if (s3c24xx_idle != NULL)
- (s3c24xx_idle)();
- else
- s3c24xx_default_idle();
-}
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index c07438b..e0b3b34 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -66,7 +66,7 @@
{ .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
};
-static int s3c2410_plls_add(struct device *dev)
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
{
return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
}
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index fda5385..03f706d 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -111,7 +111,7 @@
.resume = s3c2410_pm_resume,
};
-static int s3c2410_pm_add(struct device *dev)
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2410_pm_prepare;
pm_cpu_sleep = s3c2410_cpu_suspend;
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index d8664b7..125be7d 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -194,7 +194,8 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
};
-static int s3c2412_cpufreq_add(struct device *dev)
+static int s3c2412_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
unsigned long fclk_rate;
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 142acd3..38472ac 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -159,7 +159,8 @@
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
};
-static int __init s3c2412_dma_add(struct device *dev)
+static int __init s3c2412_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
return s3c24xx_dma_init_map(&s3c2412_dma_sel);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index a8a46c1..e65619d 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -170,7 +170,7 @@
static struct irq_chip s3c2412_irq_rtc_chip;
-static int s3c2412_irq_add(struct device *dev)
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index d1adfa6..d045885 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -56,7 +56,7 @@
{
}
-static int s3c2412_pm_add(struct device *dev)
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2412_pm_prepare;
pm_cpu_sleep = s3c2412_cpu_suspend;
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index aff6e85..c6eac98 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -32,8 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
-
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
@@ -164,7 +162,7 @@
/* set our idle function */
- s3c24xx_idle = s3c2412_idle;
+ arm_pm_idle = s3c2412_idle;
/* register our io-tables */
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 36df761..fd49f35 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -213,7 +213,8 @@
return 0;
}
-static int __init s3c2416_irq_add(struct device *dev)
+static int __init s3c2416_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk(KERN_INFO "S3C2416: IRQ Support\n");
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
index 3bdb15a..1bd4817 100644
--- a/arch/arm/mach-s3c2416/pm.c
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -48,7 +48,7 @@
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
}
-static int s3c2416_pm_add(struct device *dev)
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2416_pm_prepare;
pm_cpu_sleep = s3c2416_cpu_suspend;
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 5287d28..08bb035 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/gpio-core.h>
@@ -88,8 +87,6 @@
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
- /* s3c24xx_idle = s3c2416_idle; */
-
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index bedbc87..414364e 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -149,7 +149,7 @@
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
};
-static int s3c2440_clk_add(struct device *dev)
+static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 15b1ddf..5f0a0c8 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -174,7 +174,8 @@
},
};
-static int __init s3c2440_dma_add(struct device *dev)
+static int __init s3c2440_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2440_dma_order);
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 4fee9bc..4a18cde 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -92,7 +92,7 @@
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev)
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
index cf75966..6177676 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
@@ -270,7 +270,8 @@
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2440_cpufreq_add(struct device *dev)
+static int s3c2440_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
xtal = s3c_cpufreq_clk_get(NULL, "xtal");
hclk = s3c_cpufreq_clk_get(NULL, "hclk");
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
index b5368ae..551fb43 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
@@ -51,7 +51,7 @@
{ .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
};
-static int s3c2440_plls12_add(struct device *dev)
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
index 42f2b5c..3f15bcf 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
@@ -79,7 +79,8 @@
{ .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
};
-static int s3c2440_plls169344_add(struct device *dev)
+static int s3c2440_plls169344_add(struct device *dev,
+ struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 8004e04..22cb7c9 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -122,7 +122,7 @@
},
};
-static int s3c2442_clk_add(struct device *dev)
+static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
index b3fdbdd..6d9b688 100644
--- a/arch/arm/mach-s3c2440/s3c244x-clock.c
+++ b/arch/arm/mach-s3c2440/s3c244x-clock.c
@@ -72,7 +72,7 @@
},
};
-static int s3c244x_clk_add(struct device *dev)
+static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
index 74d3dcf..5fe8e58 100644
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ b/arch/arm/mach-s3c2440/s3c244x-irq.c
@@ -91,7 +91,7 @@
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev)
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index de6b4a2..1422451 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -135,7 +135,8 @@
.map_size = ARRAY_SIZE(s3c2443_dma_mappings),
};
-static int __init s3c2443_dma_add(struct device *dev)
+static int __init s3c2443_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
return s3c24xx_dma_init_map(&s3c2443_dma_sel);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 35e4ff2..ac2829f 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -241,7 +241,8 @@
return 0;
}
-static int __init s3c2443_irq_add(struct device *dev)
+static int __init s3c2443_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk("S3C2443: IRQ Support\n");
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 31bb27d..aebbcc2 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -138,6 +138,11 @@
.ctrlbit = S3C_CLKCON_PCLK_TSADC,
}, {
.name = "i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+ .devname = "s3c2440-i2c.0",
+#else
+ .devname = "s3c2440-i2c",
+#endif
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 4a7394d..bee7dcd 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -49,7 +49,7 @@
/* uart registration process */
-void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
}
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
deleted file mode 100644
index 353ed43..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 52b89a3..9143f8b 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -146,15 +146,12 @@
{
unsigned long val;
- if (!need_resched()) {
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
+ val = __raw_readl(S5P64X0_PWR_CFG);
+ val &= ~(0x3 << 5);
+ val |= (0x1 << 5);
+ __raw_writel(val, S5P64X0_PWR_CFG);
- cpu_do_idle();
- }
- local_irq_enable();
+ cpu_do_idle();
}
/*
@@ -286,7 +283,7 @@
printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
/* set idle function */
- pm_idle = s5p64x0_idle;
+ arm_pm_idle = s5p64x0_idle;
return device_register(&s5p64x0_dev);
}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index f820c07..f7f68ad 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -108,34 +108,22 @@
.peri_id = s5p6450_pdma_peri,
};
-struct amba_device s5p64x0_device_pdma = {
- .dev = {
- .init_name = "dma-pl330",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .res = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA,
+ {IRQ_DMA0}, NULL);
static int __init s5p64x0_dma_init(void)
{
if (soc_is_s5p6450()) {
dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
} else {
dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
}
- amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+ amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
deleted file mode 100644
index cf26e09..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
index 23f9b22..9cba18b 100644
--- a/arch/arm/mach-s5p64x0/pm.c
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -160,7 +160,7 @@
}
-static int s5p64x0_pm_add(struct device *dev)
+static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5p64x0_pm_prepare;
pm_cpu_sleep = s5p64x0_cpu_suspend;
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c909573..ff71e2d 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -129,14 +129,6 @@
}
};
-static void s5pc100_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
/*
* s5pc100_map_io
*
@@ -210,10 +202,6 @@
int __init s5pc100_init(void)
{
printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pc100_idle;
-
return device_register(&s5pc100_dev);
}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index c841f4d3..96b1ab3 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -73,21 +73,8 @@
.peri_id = pdma0_peri,
};
-struct amba_device s5pc100_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma0_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0,
+ {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_UART0_RX,
@@ -127,31 +114,18 @@
.peri_id = pdma1_peri,
};
-struct amba_device s5pc100_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma1_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1,
+ {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
static int __init s5pc100_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
deleted file mode 100644
index afc96c2..0000000
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/system.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - system implementation
- *
- * Based on mach-s3c6400/include/mach/system.h
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index c78dfdd..b9ec0c3 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -175,7 +175,7 @@
return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
}
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
}
@@ -372,7 +372,7 @@
}, {
.name = "hdmiphy",
.devname = "s5pv210-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
+ .enable = s5pv210_clk_hdmiphy_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "dacphy",
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9c1bcdc..4c9e902 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -142,14 +142,6 @@
}
};
-static void s5pv210_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
void s5pv210_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -247,10 +239,6 @@
int __init s5pv210_init(void)
{
printk(KERN_INFO "S5PV210: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pv210_idle;
-
return device_register(&s5pv210_dev);
}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index a6113e0..f6885d2 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -71,21 +71,8 @@
.peri_id = pdma0_peri,
};
-struct amba_device s5pv210_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma0_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA0,
- .end = S5PV210_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0,
+ {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
u8 pdma1_peri[] = {
DMACH_UART0_RX,
@@ -127,31 +114,18 @@
.peri_id = pdma1_peri,
};
-struct amba_device s5pv210_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma1_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA1,
- .end = S5PV210_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1,
+ {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
static int __init s5pv210_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
deleted file mode 100644
index bf288ce..0000000
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 677c71c..736bfb1 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -133,7 +133,7 @@
s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
}
-static int s5pv210_pm_add(struct device *dev)
+static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5pv210_pm_prepare;
pm_cpu_sleep = s5pv210_cpu_suspend;
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
deleted file mode 100644
index e17b208..0000000
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a851c25..6a2a7f2 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -149,10 +149,16 @@
.init = shark_timer_init,
};
+static void shark_init_early(void)
+{
+ disable_hlt();
+}
+
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
.map_io = shark_map_io,
+ .init_early = shark_init_early,
.init_irq = shark_init_irq,
.timer = &shark_timer,
.dma_zone_size = SZ_4M,
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
deleted file mode 100644
index 1b2f2c5..0000000
--- a/arch/arm/mach-shark/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index eff8a96..068b754 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,7 @@
#include <linux/serial_sci.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
@@ -37,7 +38,6 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
@@ -159,19 +159,12 @@
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
@@ -321,12 +314,11 @@
},
};
-#define DSI0PHYCR 0xe615006c
static int sh_mipi_set_dot_clock(struct platform_device *pdev,
void __iomem *base,
int enable)
{
- struct clk *pck;
+ struct clk *pck, *phy;
int ret;
pck = clk_get(&pdev->dev, "dsip_clk");
@@ -335,18 +327,27 @@
goto sh_mipi_set_dot_clock_pck_err;
}
+ phy = clk_get(&pdev->dev, "dsiphy_clk");
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ goto sh_mipi_set_dot_clock_phy_err;
+ }
+
if (enable) {
clk_set_rate(pck, clk_round_rate(pck, 24000000));
- __raw_writel(0x2a809010, DSI0PHYCR);
+ clk_set_rate(phy, clk_round_rate(pck, 510000000));
clk_enable(pck);
+ clk_enable(phy);
} else {
clk_disable(pck);
+ clk_disable(phy);
}
ret = 0;
+ clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
clk_put(pck);
-
sh_mipi_set_dot_clock_pck_err:
return ret;
}
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index aab0a34..eeb4d96 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -295,15 +295,6 @@
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 857ceee..c8e7ca2 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -143,11 +143,10 @@
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
- .poll_interval = 250, /* polled for now */
};
static struct platform_device gpio_keys_device = {
- .name = "gpio-keys-polled", /* polled for now */
+ .name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &gpio_key_info,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd..a281324 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
@@ -145,11 +144,6 @@
* 1-2 short | VBUS 5V | Host
* open | external VBUS | Function
*
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD Host
- * CONFIG_USB_RENESAS_USBHS Function
- *
* CAUTION
*
* renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
* because Touchscreen is using IRQ7-PORT40.
* It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
*/
/*
@@ -208,6 +193,16 @@
*/
/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
+/*
* FIXME !!
*
* gpio_no_direction
@@ -676,51 +671,16 @@
* Use J30 to select between Host and Function. This setting
* can however not be detected by software. Hotplug of USBHS1
* is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ * - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ * - J30 "open"
+ * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ * - add .get_vbus = usbhs_get_vbus in usbhs1_private
*/
#define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
- if (!power) /* only power-on is supported for now */
- return;
-
- /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
- __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
- .on_chip = 1,
- .port_power = usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
- [0] = {
- .name = "USBHS1",
- .start = 0xe68b0000,
- .end = 0xe68b00e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb1_host_device = {
- .name = "r8a66597_hcd",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_host_data,
- },
- .num_resources = ARRAY_SIZE(usb1_host_resources),
- .resource = usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
@@ -776,7 +736,7 @@
static int usbhs1_get_id(struct platform_device *pdev)
{
- return USBHS_GADGET;
+ return USBHS_HOST;
}
static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +767,6 @@
.hardware_exit = usbhs1_hardware_exit,
.get_id = usbhs1_get_id,
.phy_reset = usbhs_phy_reset,
- .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
@@ -1184,15 +1143,6 @@
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1150,8 @@
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
@@ -1311,7 +1262,6 @@
&nor_flash_device,
&smc911x_device,
&lcdc_device,
- &usb1_host_device,
&usbhs1_device,
&usbhs0_device,
&leds_device,
@@ -1473,9 +1423,6 @@
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
- /* USB phy tweak to make the r8a66597_hcd host driver work */
- __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
-
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index afbead6..7727cca 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -365,6 +365,114 @@
dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
};
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+
+ /* FIXME */
+ if (!(value & 0x000B8000))
+ return clk->parent->rate;
+
+ value &= 0x3f;
+ value += 1;
+
+ if ((value < 12) ||
+ (value > 33)) {
+ pr_err("DSIPHY has wrong value (%d)", value);
+ return 0;
+ }
+
+ return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+ value &= ~0x000B8000;
+
+ __raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+ u32 value;
+ int multi;
+
+ value = __raw_readl(clk->mapping->base);
+ multi = (value & 0x3f) + 1;
+
+ if ((multi < 12) || (multi > 33))
+ return -EIO;
+
+ __raw_writel(value | 0x000B8000, clk->mapping->base);
+
+ return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 value;
+ int idx;
+
+ idx = rate / clk->parent->rate;
+ if ((idx < 12) || (idx > 33))
+ return -EINVAL;
+
+ idx += -1;
+
+ value = __raw_readl(clk->mapping->base);
+ value = (value & ~0x3f) + idx;
+
+ __raw_writel(value, clk->mapping->base);
+
+ return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+ .recalc = dsiphy_recalc,
+ .round_rate = dsiphy_round_rate,
+ .set_rate = dsiphy_set_rate,
+ .enable = dsiphy_enable,
+ .disable = dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+ .phys = DSI0PHYCR,
+ .len = 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+ .phys = DSI1PHYCR,
+ .len = 4,
+};
+
+static struct clk dsi0phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI0P], /* late install */
+ .mapping = &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI1P], /* late install */
+ .mapping = &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+ &dsi0phy_clk,
+ &dsi1phy_clk,
+};
+
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
@@ -429,6 +537,8 @@
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+ ret = clk_register(late_main_clks[k]);
+
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 881d515..cad5757 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -515,8 +515,8 @@
SHDMA_SLAVE_MMCIF_RX,
};
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
#endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 956ac18..3bbcb3f 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -1,11 +1,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
soft_restart(0);
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 1eda6b0..9857595 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
@@ -445,6 +446,7 @@
setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+ WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
handle_level_irq, "level");
set_irq_flags(n, IRQF_VALID); /* yuck */
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index 963532f..d14c9b0 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -2120,7 +2120,7 @@
FN_AUDATA3, 0, 0, 0 }
},
{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
- 3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+ 3, 1, 1, 1, 1, 1, 1, 3, 3,
1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
/* IP4_31_29 [3] */
FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 1bd6585..336093f 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <mach/irqs.h>
#include <mach/sh7372.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@
{ },
};
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
static struct pinmux_info sh7372_pinmux_info = {
.name = "sh7372_pfc",
.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh7372_pinmux_init(void)
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 0d159d6..2d0d421 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -80,7 +80,7 @@
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
- if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+ if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
__raw_writel(1 << cpu, __io(WUPCR)); /* wake up */
else
__raw_writel(1 << cpu, __io(SRESCR)); /* reset */
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
deleted file mode 100644
index 92cee63..0000000
--- a/arch/arm/mach-spear3xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/system.h
- *
- * SPEAr3xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a5e46b4..9da50e281 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -430,18 +430,8 @@
.irq_base = SPEAR300_GPIO1_INT_BASE,
};
-struct amba_device spear300_gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
+ {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
/* spear300 routines */
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 10af45d..b1733c3 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -28,31 +28,12 @@
.irq_base = SPEAR3XX_GPIO_INT_BASE,
};
-struct amba_device spear3xx_gpio_device = {
- .dev = {
- .init_name = "gpio",
- .platform_data = &gpio_plat_data,
- },
- .res = {
- .start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
+ {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
/* uart device registration */
-struct amba_device spear3xx_uart_device = {
- .dev = {
- .init_name = "uart",
- },
- .res = {
- .start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
+ {SPEAR3XX_IRQ_UART}, NULL);
/* Do spear3xx familiy common initialization part here */
void __init spear3xx_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
deleted file mode 100644
index 0b1d2be..0000000
--- a/arch/arm/mach-spear6xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/system.h
- *
- * SPEAr6xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e0f6628..b997b1b 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -34,7 +34,7 @@
.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_0, NO_IRQ},
+ .irq = {IRQ_UART_0},
}, {
.dev = {
.init_name = "uart1",
@@ -44,7 +44,7 @@
.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_1, NO_IRQ},
+ .irq = {IRQ_UART_1},
}
};
@@ -73,7 +73,7 @@
.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+ .irq = {IRQ_LOCAL_GPIO},
}, {
.dev = {
.init_name = "gpio1",
@@ -84,7 +84,7 @@
.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_BASIC_GPIO, NO_IRQ},
+ .irq = {IRQ_BASIC_GPIO},
}, {
.dev = {
.init_name = "gpio2",
@@ -95,7 +95,7 @@
.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_APPL_GPIO, NO_IRQ},
+ .irq = {IRQ_APPL_GPIO},
}
};
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fcf4f37..330afdf 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -60,9 +60,9 @@
.uartclk = 216000000,
}, {
/* serial port on mini-pcie */
- .membase = IO_ADDRESS(TEGRA_UARTD_BASE),
- .mapbase = TEGRA_UARTD_BASE,
- .irq = INT_UARTD,
+ .membase = IO_ADDRESS(TEGRA_UARTC_BASE),
+ .mapbase = TEGRA_UARTC_BASE,
+ .irq = INT_UARTC,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
@@ -174,7 +174,7 @@
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
- { "uartd", "pll_p", 216000000, true },
+ { "uartc", "pll_p", 216000000, true },
{ "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index ffa83f5..3c9f8da 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -22,7 +22,7 @@
/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1
/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index a2eb901..2db20da 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -27,7 +27,6 @@
#include <asm/hardware/gic.h>
#include <mach/iomap.h>
-#include <mach/system.h>
#include "board.h"
#include "clock.h"
@@ -96,6 +95,8 @@
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void __init tegra20_init_early(void)
{
+ disable_hlt(); /* idle WFI usage needs to be confirmed */
+
tegra_init_fuse();
tegra2_init_clocks();
tegra_clk_init_from_table(tegra20_clk_init_table);
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index d0132e8..3c9339058 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -23,11 +23,6 @@
#include <linux/list.h>
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
#define TEGRA_DMA_REQ_SEL_CNTR 0
#define TEGRA_DMA_REQ_SEL_I2S_2 1
#define TEGRA_DMA_REQ_SEL_I2S_1 2
@@ -56,6 +51,11 @@
#define TEGRA_DMA_REQ_SEL_OWR 25
#define TEGRA_DMA_REQ_SEL_INVALID 31
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+
+struct tegra_dma_req;
+struct tegra_dma_channel;
+
enum tegra_dma_mode {
TEGRA_DMA_SHARED = 1,
TEGRA_DMA_MODE_CONTINOUS = 2,
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
deleted file mode 100644
index a312988..0000000
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/system.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_SYSTEM_H
-#define __MACH_TEGRA_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b4c6926..b986560 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -94,19 +94,9 @@
#endif
};
-static struct amba_device uart0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart0", /* Slow device at 0x3000 offset */
- .platform_data = &uart0_plat_data,
- },
- .res = {
- .start = U300_UART0_BASE,
- .end = U300_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART0, NO_IRQ },
-};
+/* Slow device at 0x3000 offset */
+static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
+ { IRQ_U300_UART0 }, &uart0_plat_data);
/* The U335 have an additional UART1 on the APP CPU */
#ifdef CONFIG_MACH_U300_BS335
@@ -118,71 +108,28 @@
#endif
};
-static struct amba_device uart1_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart1", /* Fast device at 0x7000 offset */
- .platform_data = &uart1_plat_data,
- },
- .res = {
- .start = U300_UART1_BASE,
- .end = U300_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART1, NO_IRQ },
-};
+/* Fast device at 0x7000 offset */
+static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
+ { IRQ_U300_UART1 }, &uart1_plat_data);
#endif
-static struct amba_device pl172_device = {
- .dev = {
- .init_name = "pl172", /* AHB device at 0x4000 offset */
- .platform_data = NULL,
- },
- .res = {
- .start = U300_EMIF_CFG_BASE,
- .end = U300_EMIF_CFG_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
+/* AHB device at 0x4000 offset */
+static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
/*
* Everything within this next ifdef deals with external devices connected to
* the APP SPI bus.
*/
-static struct amba_device pl022_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "pl022", /* Fast device at 0x6000 offset */
- },
- .res = {
- .start = U300_SPI_BASE,
- .end = U300_SPI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_SPI, NO_IRQ },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x6000 offset */
+static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
+ { IRQ_U300_SPI }, NULL);
-static struct amba_device mmcsd_device = {
- .dev = {
- .init_name = "mmci", /* Fast device at 0x1000 offset */
- .platform_data = NULL, /* Added later */
- },
- .res = {
- .start = U300_MMCSD_BASE,
- .end = U300_MMCSD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x1000 offset */
+#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+
+static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
+ U300_MMCSD_IRQS, NULL);
/*
* The order of device declaration may be important, since some devices
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
deleted file mode 100644
index 574d46e..0000000
--- a/arch/arm/mach-u300/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..898a645 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -26,29 +26,22 @@
struct amba_device *dev;
int ret;
- dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ dev = amba_device_alloc(name, base, SZ_4K);
if (!dev)
return ERR_PTR(-ENOMEM);
- dev->dev.init_name = name;
-
- dev->res.start = base;
- dev->res.end = base + SZ_4K - 1;
- dev->res.flags = IORESOURCE_MEM;
-
dev->dma_mask = DMA_BIT_MASK(32);
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->irq[0] = irq;
- dev->irq[1] = NO_IRQ;
dev->periphid = periphid;
dev->dev.platform_data = pdata;
- ret = amba_device_register(dev, &iomem_resource);
+ ret = amba_device_add(dev, &iomem_resource);
if (ret) {
- kfree(dev);
+ amba_device_put(dev);
return ERR_PTR(ret);
}
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
deleted file mode 100644
index 258e5c9..0000000
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 008ce22..0968772 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -585,58 +585,58 @@
.num_chipselect = 1,
};
-#define AACI_IRQ { IRQ_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_AACI }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_SIC_KMI0 }
+#define KMI1_IRQ { IRQ_SIC_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
-#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
+#define SMC_IRQ { }
+#define MPMC_IRQ { }
+#define CLCD_IRQ { IRQ_CLCDINT }
+#define DMAC_IRQ { IRQ_DMAINT }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
-#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
-#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
+#define SCTL_IRQ { }
+#define WATCHDOG_IRQ { IRQ_WDOGINT }
+#define GPIO0_IRQ { IRQ_GPIOINT0 }
+#define GPIO1_IRQ { IRQ_GPIOINT1 }
+#define RTC_IRQ { IRQ_RTCINT }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
-#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
-#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
-#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
-#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
+#define SCI_IRQ { IRQ_SCIINT }
+#define UART0_IRQ { IRQ_UARTINT0 }
+#define UART1_IRQ { IRQ_UARTINT1 }
+#define UART2_IRQ { IRQ_UARTINT2 }
+#define SSP_IRQ { IRQ_SSPINT }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+APB_DEVICE(aaci, "fpga:04", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:07", KMI1, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", SMC, NULL);
-AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:00", SMC, NULL);
+AHB_DEVICE(mpmc, "dev:10", MPMC, NULL);
+AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:30", DMAC, NULL);
+APB_DEVICE(sctl, "dev:e0", SCTL, NULL);
+APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+APB_DEVICE(rtc, "dev:e8", RTC, NULL);
+APB_DEVICE(sci0, "dev:f0", SCI, NULL);
+APB_DEVICE(uart0, "dev:f1", UART0, NULL);
+APB_DEVICE(uart1, "dev:f2", UART1, NULL);
+APB_DEVICE(uart2, "dev:f3", UART2, NULL);
+APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 2ef2f55..683e607 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -36,20 +36,10 @@
extern struct of_dev_auxdata versatile_auxdata_lookup[];
#endif
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = VERSATILE_##base##_BASE, \
- .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
#endif
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
deleted file mode 100644
index f3fa347..0000000
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9581c19..1973833 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -58,28 +58,28 @@
.irq_base = IRQ_GPIO3_START,
};
-#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
-#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ }
+#define UART3_IRQ { IRQ_SIC_UART3 }
+#define SCI1_IRQ { IRQ_SIC_SCI3 }
#define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B }
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_GPIOINT2 }
+#define GPIO3_IRQ { IRQ_GPIOINT3 }
/*
* These devices are connected via the DMA APB bridge
*/
/* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
-AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL);
-AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
+APB_DEVICE(uart3, "fpga:09", UART3, NULL);
+APB_DEVICE(sci1, "fpga:0a", SCI1, NULL);
+APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
/* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
+APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
+APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart3_device,
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 9b3d0fb..cf8730d 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,14 +1,55 @@
menu "Versatile Express platform type"
depends on ARCH_VEXPRESS
-config ARCH_VEXPRESS_CA9X4
- bool "Versatile Express Cortex-A9x4 tile"
- select CPU_V7
- select ARM_GIC
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ bool
select ARM_ERRATA_720789
select ARM_ERRATA_751472
- select ARM_ERRATA_753970
+ select PL310_ERRATA_753970 if CACHE_PL310
+ help
+ Provides common dependencies for Versatile Express platforms
+ based on Cortex-A5 and Cortex-A9 processors. In order to
+ build a working kernel, you must also enable relevant core
+ tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_CA9X4
+ bool "Versatile Express Cortex-A9x4 tile"
+ select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ select ARM_GIC
+ select CPU_V7
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+config ARCH_VEXPRESS_DT
+ bool "Device Tree support for Versatile Express platforms"
+ select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ select ARM_GIC
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
+ select CPU_V7
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
+ select USE_OF
+ help
+ New Versatile Express platforms require Flattened Device Tree to
+ be passed to the kernel.
+
+ This option enables support for systems using Cortex processor based
+ ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
+ for example:
+
+ - CoreTile Express A5x2 (V2P-CA5s)
+ - CoreTile Express A9x4 (V2P-CA9)
+ - CoreTile Express A15x2 (V2P-CA15)
+ - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
+ (Soft Macrocell Models)
+ - Versatile Express RTSMs (Models)
+
+ You must boot using a Flattened Device Tree in order to use these
+ platforms. The traditional (ATAGs) boot method is not usable on
+ these boards with this option.
+
+ If your bootloader supports Flattened Device Tree based booting,
+ say Y here.
+
endmenu
diff --git a/arch/arm/mach-vexpress/Makefile.boot b/arch/arm/mach-vexpress/Makefile.boot
index 8630b3d..909f85e 100644
--- a/arch/arm/mach-vexpress/Makefile.boot
+++ b/arch/arm/mach-vexpress/Makefile.boot
@@ -1,3 +1,9 @@
+# Those numbers are used only by the non-DT V2P-CA9 platform
+# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y
zreladdr-y += 0x60008000
params_phys-y := 0x60000100
initrd_phys-y := 0x60800000
+
+dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
+ vexpress-v2p-ca9.dtb \
+ vexpress-v2p-ca15-tc1.dtb
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index f439715..a3a4980 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,19 +1,7 @@
-#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
-#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x))
+/* 2MB large area for motherboard's peripherals static mapping */
+#define V2M_PERIPH 0xf8000000
-#define AMBA_DEVICE(name,busid,base,plat) \
-struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0UL, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = base, \
- .end = base + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0UL, \
- .irq = IRQ_##base, \
- /* .dma = DMA_##base,*/ \
-}
+/* Tile's peripherals static mappings should start here */
+#define V2T_PERIPH 0xf8200000
+
+void vexpress_dt_smp_map_io(void);
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index b1e87c1..73791f0 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -30,57 +30,29 @@
#include <plat/clcd.h>
-#define V2M_PA_CS7 0x10000000
-
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
{
- .virtual = __MMIO_P2V(CT_CA9X4_MPIC),
- .pfn = __phys_to_pfn(CT_CA9X4_MPIC),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER),
- .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = __MMIO_P2V(CT_CA9X4_L2CC),
- .pfn = __phys_to_pfn(CT_CA9X4_L2CC),
- .length = SZ_4K,
- .type = MT_DEVICE,
+ .virtual = V2T_PERIPH,
+ .pfn = __phys_to_pfn(CT_CA9X4_MPIC),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
},
};
static void __init ct_ca9x4_map_io(void)
{
-#ifdef CONFIG_LOCAL_TIMERS
- twd_base = MMIO_P2V(A9_MPCORE_TWD);
-#endif
iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = ioremap(A9_MPCORE_TWD, SZ_32);
+#endif
}
static void __init ct_ca9x4_init_irq(void)
{
- gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST),
- MMIO_P2V(A9_MPCORE_GIC_CPU));
+ gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
+ ioremap(A9_MPCORE_GIC_CPU, SZ_256));
}
-#if 0
-static void __init ct_ca9x4_timer_init(void)
-{
- writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
- writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
-
- sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1), "ct-timer1");
- sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0,
- "ct-timer0");
-}
-
-static struct sys_timer ct_ca9x4_timer = {
- .init = ct_ca9x4_timer_init,
-};
-#endif
-
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
@@ -109,10 +81,10 @@
.remove = versatile_clcd_remove_dma,
};
-static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
-static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
-static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
+static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
+static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&clcd_device,
@@ -201,7 +173,7 @@
int i;
#ifdef CONFIG_CACHE_L2X0
- void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+ void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
@@ -217,9 +189,17 @@
}
#ifdef CONFIG_SMP
+static void *ct_ca9x4_scu_base __initdata;
+
static void __init ct_ca9x4_init_cpu_map(void)
{
- int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
+ int i, ncores;
+
+ ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
+ if (WARN_ON(!ct_ca9x4_scu_base))
+ return;
+
+ ncores = scu_get_core_count(ct_ca9x4_scu_base);
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
@@ -235,7 +215,7 @@
static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
{
- scu_enable(MMIO_P2V(A9_MPCORE_SCU));
+ scu_enable(ct_ca9x4_scu_base);
}
#endif
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index a34d3d4..84acf84 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -22,9 +22,6 @@
#define CT_CA9X4_SYSWDT (0x1e007000)
#define CT_CA9X4_L2CC (0x1e00a000)
-#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000)
-#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020)
-
#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000)
#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100)
#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200)
@@ -35,7 +32,7 @@
* Interrupts. Those in {} are for AMBA devices
*/
#define IRQ_CT_CA9X4_CLCDC { 76 }
-#define IRQ_CT_CA9X4_DMC { -1 }
+#define IRQ_CT_CA9X4_DMC { 0 }
#define IRQ_CT_CA9X4_SMC { 77, 78 }
#define IRQ_CT_CA9X4_TIMER0 80
#define IRQ_CT_CA9X4_TIMER1 81
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index fd9e6c7..fa82247 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -10,12 +10,34 @@
* published by the Free Software Foundation.
*/
-#define DEBUG_LL_UART_OFFSET 0x00009000
+#define DEBUG_LL_PHYS_BASE 0x10000000
+#define DEBUG_LL_UART_OFFSET 0x00009000
+
+#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
+#define DEBUG_LL_UART_OFFSET_RS1 0x00090000
+
+#define DEBUG_LL_VIRT_BASE 0xf8000000
.macro addruart,rp,rv,tmp
- mov \rp, #DEBUG_LL_UART_OFFSET
- orr \rv, \rp, #0xf8000000 @ virtual base
- orr \rp, \rp, #0x10000000 @ physical base
+
+ @ Make an educated guess regarding the memory map:
+ @ - the original A9 core tile, which has MPCore peripherals
+ @ located at 0x1e000000, should use UART at 0x10009000
+ @ - all other (RS1 complaint) tiles use UART mapped
+ @ at 0x1c090000
+ mrc p15, 4, \tmp, c15, c0, 0
+ cmp \tmp, #0x1e000000
+
+ @ Original memory map
+ moveq \rp, #DEBUG_LL_UART_OFFSET
+ orreq \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orreq \rp, \rp, #DEBUG_LL_PHYS_BASE
+
+ @ RS1 memory map
+ movne \rp, #DEBUG_LL_UART_OFFSET_RS1
+ orrne \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orrne \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-vexpress/include/mach/irqs.h b/arch/arm/mach-vexpress/include/mach/irqs.h
index 7054cbf..4b10ee7 100644
--- a/arch/arm/mach-vexpress/include/mach/irqs.h
+++ b/arch/arm/mach-vexpress/include/mach/irqs.h
@@ -1,4 +1,4 @@
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
-#define NR_IRQS 128
+#define NR_IRQS 256
diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h
index 0a3a375..31a9289 100644
--- a/arch/arm/mach-vexpress/include/mach/motherboard.h
+++ b/arch/arm/mach-vexpress/include/mach/motherboard.h
@@ -39,33 +39,30 @@
#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
-#define V2M_SYS_ID (V2M_SYSREGS + 0x000)
-#define V2M_SYS_SW (V2M_SYSREGS + 0x004)
-#define V2M_SYS_LED (V2M_SYSREGS + 0x008)
-#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024)
-#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030)
-#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030)
-#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034)
-#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038)
-#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038)
-#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c)
-#define V2M_SYS_MCI (V2M_SYSREGS + 0x048)
-#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c)
-#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058)
-#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c)
-#define V2M_SYS_MISC (V2M_SYSREGS + 0x060)
-#define V2M_SYS_DMA (V2M_SYSREGS + 0x064)
-#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084)
-#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088)
-#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
-#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
-#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
-
-#define V2M_TIMER0 (V2M_TIMER01 + 0x000)
-#define V2M_TIMER1 (V2M_TIMER01 + 0x020)
-
-#define V2M_TIMER2 (V2M_TIMER23 + 0x000)
-#define V2M_TIMER3 (V2M_TIMER23 + 0x020)
+/*
+ * Offsets from SYSREGS base
+ */
+#define V2M_SYS_ID 0x000
+#define V2M_SYS_SW 0x004
+#define V2M_SYS_LED 0x008
+#define V2M_SYS_100HZ 0x024
+#define V2M_SYS_FLAGS 0x030
+#define V2M_SYS_FLAGSSET 0x030
+#define V2M_SYS_FLAGSCLR 0x034
+#define V2M_SYS_NVFLAGS 0x038
+#define V2M_SYS_NVFLAGSSET 0x038
+#define V2M_SYS_NVFLAGSCLR 0x03c
+#define V2M_SYS_MCI 0x048
+#define V2M_SYS_FLASH 0x03c
+#define V2M_SYS_CFGSW 0x058
+#define V2M_SYS_24MHZ 0x05c
+#define V2M_SYS_MISC 0x060
+#define V2M_SYS_DMA 0x064
+#define V2M_SYS_PROCID0 0x084
+#define V2M_SYS_PROCID1 0x088
+#define V2M_SYS_CFGDATA 0x0a0
+#define V2M_SYS_CFGCTRL 0x0a4
+#define V2M_SYS_CFGSTAT 0x0a8
/*
@@ -117,6 +114,13 @@
int v2m_cfg_write(u32 devfn, u32 data);
int v2m_cfg_read(u32 devfn, u32 *data);
+void v2m_flags_set(u32 data);
+
+/*
+ * Miscellaneous
+ */
+#define SYS_MISC_MASTERSITE (1 << 14)
+#define SYS_PROCIDx_HBI_MASK 0xfff
/*
* Core tile IDs
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
deleted file mode 100644
index f653a8e..0000000
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h
index 7972c57..7dab559 100644
--- a/arch/arm/mach-vexpress/include/mach/uncompress.h
+++ b/arch/arm/mach-vexpress/include/mach/uncompress.h
@@ -22,7 +22,27 @@
#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
-#define get_uart_base() (0x10000000 + 0x00009000)
+#define UART_BASE 0x10009000
+#define UART_BASE_RS1 0x1c090000
+
+static unsigned long get_uart_base(void)
+{
+ unsigned long mpcore_periph;
+
+ /*
+ * Make an educated guess regarding the memory map:
+ * - the original A9 core tile, which has MPCore peripherals
+ * located at 0x1e000000, should use UART at 0x10009000
+ * - all other (RS1 complaint) tiles use UART mapped
+ * at 0x1c090000
+ */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
+
+ if (mpcore_periph == 0x1e000000)
+ return UART_BASE;
+ else
+ return UART_BASE_RS1;
+}
/*
* This does not append a newline
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 124ffb1..14ba112 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -12,21 +12,168 @@
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/of_fdt.h>
+
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
#include <mach/motherboard.h>
-#define V2M_PA_CS7 0x10000000
#include "core.h"
extern void versatile_secondary_startup(void);
+#if defined(CONFIG_OF)
+
+static enum {
+ GENERIC_SCU,
+ CORTEX_A9_SCU,
+} vexpress_dt_scu __initdata = GENERIC_SCU;
+
+static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = {
+ .virtual = V2T_PERIPH,
+ /* .pfn set in vexpress_dt_init_cortex_a9_scu() */
+ .length = SZ_128,
+ .type = MT_DEVICE,
+};
+
+static void *vexpress_dt_cortex_a9_scu_base __initdata;
+
+const static char *vexpress_dt_cortex_a9_match[] __initconst = {
+ "arm,cortex-a5-scu",
+ "arm,cortex-a9-scu",
+ NULL
+};
+
+static int __init vexpress_dt_find_scu(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) {
+ phys_addr_t phys_addr;
+ __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL);
+
+ if (WARN_ON(!reg))
+ return -EINVAL;
+
+ phys_addr = be32_to_cpup(reg);
+ vexpress_dt_scu = CORTEX_A9_SCU;
+
+ vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr);
+ iotable_init(&vexpress_dt_cortex_a9_scu_map, 1);
+ vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256);
+ if (WARN_ON(!vexpress_dt_cortex_a9_scu_base))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+void __init vexpress_dt_smp_map_io(void)
+{
+ if (initial_boot_params)
+ WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL));
+}
+
+static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ static int prev_depth = -1;
+ static int nr_cpus = -1;
+
+ if (prev_depth > depth && nr_cpus > 0)
+ return nr_cpus;
+
+ if (nr_cpus < 0 && strcmp(uname, "cpus") == 0)
+ nr_cpus = 0;
+
+ if (nr_cpus >= 0) {
+ const char *device_type = of_get_flat_dt_prop(node,
+ "device_type", NULL);
+
+ if (device_type && strcmp(device_type, "cpu") == 0)
+ nr_cpus++;
+ }
+
+ prev_depth = depth;
+
+ return 0;
+}
+
+static void __init vexpress_dt_smp_init_cpus(void)
+{
+ int ncores = 0, i;
+
+ switch (vexpress_dt_scu) {
+ case GENERIC_SCU:
+ ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL);
+ break;
+ case CORTEX_A9_SCU:
+ ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ if (ncores < 2)
+ return;
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; ++i)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ switch (vexpress_dt_scu) {
+ case GENERIC_SCU:
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+ break;
+ case CORTEX_A9_SCU:
+ scu_enable(vexpress_dt_cortex_a9_scu_base);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+}
+
+#else
+
+static void __init vexpress_dt_smp_init_cpus(void)
+{
+ WARN_ON(1);
+}
+
+void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
+{
+ WARN_ON(1);
+}
+
+#endif
+
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
{
- ct_desc->init_cpu_map();
+ if (ct_desc)
+ ct_desc->init_cpu_map();
+ else
+ vexpress_dt_smp_init_cpus();
+
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
@@ -35,7 +182,10 @@
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
- ct_desc->smp_enable(max_cpus);
+ if (ct_desc)
+ ct_desc->smp_enable(max_cpus);
+ else
+ vexpress_dt_smp_prepare_cpus(max_cpus);
/*
* Write the address of secondary startup into the
@@ -43,7 +193,5 @@
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
- writel(virt_to_phys(versatile_secondary_startup),
- MMIO_P2V(V2M_SYS_FLAGSSET));
+ v2m_flags_set(virt_to_phys(versatile_secondary_startup));
}
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index b4a28ca..47cdcca 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -6,6 +6,10 @@
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/smsc911x.h>
@@ -21,6 +25,8 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/sp810.h>
#include <asm/hardware/gic.h>
@@ -40,29 +46,45 @@
static struct map_desc v2m_io_desc[] __initdata = {
{
- .virtual = __MMIO_P2V(V2M_PA_CS7),
+ .virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(V2M_PA_CS7),
.length = SZ_128K,
.type = MT_DEVICE,
},
};
-static void __init v2m_timer_init(void)
+static void __iomem *v2m_sysreg_base;
+
+static void __init v2m_sysctl_init(void __iomem *base)
{
u32 scctrl;
+ if (WARN_ON(!base))
+ return;
+
/* Select 1MHz TIMCLK as the reference clock for SP804 timers */
- scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL));
+ scctrl = readl(base + SCCTRL);
scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
- writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL));
+ writel(scctrl, base + SCCTRL);
+}
- writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
- writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
+static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
+{
+ if (WARN_ON(!base || irq == NO_IRQ))
+ return;
- sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1");
- sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0,
- "v2m-timer0");
+ writel(0, base + TIMER_1_BASE + TIMER_CTRL);
+ writel(0, base + TIMER_2_BASE + TIMER_CTRL);
+
+ sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
+ sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
+}
+
+static void __init v2m_timer_init(void)
+{
+ v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
+ v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
}
static struct sys_timer v2m_timer = {
@@ -82,14 +104,14 @@
devfn |= SYS_CFG_START | SYS_CFG_WRITE;
spin_lock(&v2m_cfg_lock);
- val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
- writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT));
+ val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
+ writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT);
- writel(data, MMIO_P2V(V2M_SYS_CFGDATA));
- writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+ writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA);
+ writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
do {
- val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+ val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
spin_unlock(&v2m_cfg_lock);
@@ -103,22 +125,28 @@
devfn |= SYS_CFG_START;
spin_lock(&v2m_cfg_lock);
- writel(0, MMIO_P2V(V2M_SYS_CFGSTAT));
- writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+ writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT);
+ writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
mb();
do {
cpu_relax();
- val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+ val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
- *data = readl(MMIO_P2V(V2M_SYS_CFGDATA));
+ *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA);
spin_unlock(&v2m_cfg_lock);
return !!(val & SYS_CFG_ERR);
}
+void __init v2m_flags_set(u32 data)
+{
+ writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR);
+ writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
+}
+
static struct resource v2m_pcie_i2c_resource = {
.start = V2M_SERIAL_BUS_PCI,
@@ -204,7 +232,7 @@
static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
{
- writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
+ writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH);
}
static struct physmap_flash_data v2m_flash_data = {
@@ -258,7 +286,7 @@
static unsigned int v2m_mmci_status(struct device *dev)
{
- return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
+ return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0);
}
static struct mmci_platform_data v2m_mmci_data = {
@@ -266,16 +294,16 @@
.status = v2m_mmci_status,
};
-static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL);
-static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data);
-static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL);
-static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL);
-static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
-static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
-static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
-static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
-static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL);
-static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL);
+static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
+static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
+static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
+static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
+static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
+static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
+static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
+static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL);
+static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL);
static struct amba_device *v2m_amba_devs[] __initdata = {
&aaci_device,
@@ -371,7 +399,7 @@
{
ct_desc->init_early();
clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
- versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+ versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
}
static void v2m_power_off(void)
@@ -400,20 +428,23 @@
u32 current_tile_id;
ct_desc = NULL;
- current_tile_id = readl(MMIO_P2V(V2M_SYS_PROCID0)) & V2M_CT_ID_MASK;
+ current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0)
+ & V2M_CT_ID_MASK;
for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
if (ct_descs[i]->id == current_tile_id)
ct_desc = ct_descs[i];
if (!ct_desc)
- panic("vexpress: failed to populate core tile description "
- "for tile ID 0x%8x\n", current_tile_id);
+ panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n"
+ "You may need a device tree blob or a different kernel to boot on this board.\n",
+ current_tile_id);
}
static void __init v2m_map_io(void)
{
iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
+ v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K);
v2m_populate_ct_desc();
ct_desc->map_io();
}
@@ -452,3 +483,205 @@
.init_machine = v2m_init,
.restart = v2m_restart,
MACHINE_END
+
+#if defined(CONFIG_ARCH_VEXPRESS_DT)
+
+static struct map_desc v2m_rs1_io_desc __initdata = {
+ .virtual = V2M_PERIPH,
+ .pfn = __phys_to_pfn(0x1c000000),
+ .length = SZ_2M,
+ .type = MT_DEVICE,
+};
+
+static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ const char **map = data;
+
+ if (strcmp(uname, "motherboard") != 0)
+ return 0;
+
+ *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL);
+
+ return 1;
+}
+
+void __init v2m_dt_map_io(void)
+{
+ const char *map = NULL;
+
+ of_scan_flat_dt(v2m_dt_scan_memory_map, &map);
+
+ if (map && strcmp(map, "rs1") == 0)
+ iotable_init(&v2m_rs1_io_desc, 1);
+ else
+ iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
+
+#if defined(CONFIG_SMP)
+ vexpress_dt_smp_map_io();
+#endif
+}
+
+static struct clk_lookup v2m_dt_lookups[] = {
+ { /* AMBA bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer0",
+ .clk = &v2m_sp804_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer1",
+ .clk = &v2m_sp804_clk,
+ }, { /* PL180 MMCI */
+ .dev_id = "mb:mmci", /* 10005000.mmci */
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI0 */
+ .dev_id = "10006000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI1 */
+ .dev_id = "10007000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART0 */
+ .dev_id = "10009000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART1 */
+ .dev_id = "1000a000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART2 */
+ .dev_id = "1000b000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART3 */
+ .dev_id = "1000c000.uart",
+ .clk = &osc2_clk,
+ }, { /* SP805 WDT */
+ .dev_id = "1000f000.wdt",
+ .clk = &v2m_ref_clk,
+ }, { /* PL111 CLCD */
+ .dev_id = "1001f000.clcd",
+ .clk = &osc1_clk,
+ },
+ /* RS1 memory map */
+ { /* PL180 MMCI */
+ .dev_id = "mb:mmci", /* 1c050000.mmci */
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI0 */
+ .dev_id = "1c060000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI1 */
+ .dev_id = "1c070000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART0 */
+ .dev_id = "1c090000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART1 */
+ .dev_id = "1c0a0000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART2 */
+ .dev_id = "1c0b0000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART3 */
+ .dev_id = "1c0c0000.uart",
+ .clk = &osc2_clk,
+ }, { /* SP805 WDT */
+ .dev_id = "1c0f0000.wdt",
+ .clk = &v2m_ref_clk,
+ }, { /* PL111 CLCD */
+ .dev_id = "1c1f0000.clcd",
+ .clk = &osc1_clk,
+ },
+};
+
+void __init v2m_dt_init_early(void)
+{
+ struct device_node *node;
+ u32 dt_hbi;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
+ v2m_sysreg_base = of_iomap(node, 0);
+ if (WARN_ON(!v2m_sysreg_base))
+ return;
+
+ /* Confirm board type against DT property, if available */
+ if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
+ u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
+ u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ?
+ V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
+ u32 hbi = id & SYS_PROCIDx_HBI_MASK;
+
+ if (WARN_ON(dt_hbi != hbi))
+ pr_warning("vexpress: DT HBI (%x) is not matching "
+ "hardware (%x)!\n", dt_hbi, hbi);
+ }
+
+ clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups));
+ versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
+}
+
+static struct of_device_id vexpress_irq_match[] __initdata = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {}
+};
+
+static void __init v2m_dt_init_irq(void)
+{
+ of_irq_init(vexpress_irq_match);
+}
+
+static void __init v2m_dt_timer_init(void)
+{
+ struct device_node *node;
+ const char *path;
+ int err;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,sp810");
+ v2m_sysctl_init(of_iomap(node, 0));
+
+ err = of_property_read_string(of_aliases, "arm,v2m_timer", &path);
+ if (WARN_ON(err))
+ return;
+ node = of_find_node_by_path(path);
+ v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0));
+}
+
+static struct sys_timer v2m_dt_timer = {
+ .init = v2m_dt_timer_init,
+};
+
+static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash",
+ &v2m_flash_data),
+ OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data),
+ /* RS1 memory map */
+ OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash",
+ &v2m_flash_data),
+ OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data),
+ {}
+};
+
+static void __init v2m_dt_init(void)
+{
+ l2x0_of_init(0x00400000, 0xfe0fffff);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ v2m_dt_auxdata_lookup, NULL);
+ pm_power_off = v2m_power_off;
+}
+
+const static char *v2m_dt_match[] __initconst = {
+ "arm,vexpress",
+ NULL,
+};
+
+DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
+ .dt_compat = v2m_dt_match,
+ .map_io = v2m_dt_map_io,
+ .init_early = v2m_dt_init_early,
+ .init_irq = v2m_dt_init_irq,
+ .timer = &v2m_dt_timer,
+ .init_machine = v2m_dt_init,
+ .handle_irq = gic_handle_irq,
+ .restart = v2m_restart,
+MACHINE_END
+
+#endif
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
index d6c757e..58fa801 100644
--- a/arch/arm/mach-vt8500/include/mach/system.h
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -7,11 +7,6 @@
/* PM Software Reset request register */
#define VT8500_PMSR_VIRT 0xf8130060
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
writel(1, VT8500_PMSR_VIRT);
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 78110be..db82568 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -530,6 +530,7 @@
void __init nuc900_board_init(struct platform_device **device, int size)
{
+ disable_hlt();
platform_add_devices(device, size);
platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
spi_register_board_info(nuc900_spi_board_info,
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
deleted file mode 100644
index 2aaeb93..0000000
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-static void arch_idle(void)
-{
-}
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
deleted file mode 100644
index 8e88e0b..0000000
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/system.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1a3ca24..7edef91 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -631,7 +631,8 @@
config ARM_LPAE
bool "Support for the Large Physical Address Extension"
- depends on MMU && CPU_V7
+ depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+ !CPU_32v4 && !CPU_32v3
help
Say Y if you have an ARMv7 processor supporting the LPAE page
table format and you would like to access memory beyond the
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 7a24d39..a655d3d 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -55,7 +55,7 @@
cmp r1, #2 @ see what cache we have at this level
blt skip @ skip if no cache, or just i-cache
#ifdef CONFIG_PREEMPT
- save_and_disable_irqs r9 @ make cssr&csidr read atomic
+ save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic
#endif
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb @ isb to sych the new cssr&csidr
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
deleted file mode 100644
index 13ad0df..0000000
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index aa59f42..f419a08 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,6 +14,7 @@
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
select HAVE_IDE
select NEED_MACH_MEMORY_H
help
@@ -24,6 +25,8 @@
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
+ select USE_OF
+ select PROC_DEVICETREE if PROC_FS
help
"Systems based on OMAP2, OMAP3 or OMAP4"
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 64f9d1c..3047ff9 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -3,7 +3,7 @@
#include <linux/types.h>
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
extern int omap_secure_ram_reserve_memblock(void);
#else
static inline void omap_secure_ram_reserve_memblock(void)
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
deleted file mode 100644
index 8e5ebd7..0000000
--- a/arch/arm/plat-omap/include/plat/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index e8d9869..69fde03 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -348,7 +348,7 @@
oh_cnt = of_property_count_strings(node, "ti,hwmods");
if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
- dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
return -ENODEV;
}
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index e5a2fde..089899a 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -789,10 +789,7 @@
/*****************************************************************************
* EHCI
****************************************************************************/
-static struct orion_ehci_data orion_ehci_data = {
- .phy_version = EHCI_PHY_NA,
-};
-
+static struct orion_ehci_data orion_ehci_data;
static u64 ehci_dmamask = DMA_BIT_MASK(32);
@@ -812,8 +809,10 @@
};
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq)
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version)
{
+ orion_ehci_data.phy_version = phy_version;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 0fe08d7..a7fa005 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -89,7 +89,8 @@
unsigned long irq_1);
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq);
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version);
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq);
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 9155343..3b1e17b 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -64,8 +64,7 @@
gpio_mode |= GPIO_INPUT_OK;
if (*mpp_list & MPP_OUTPUT_MASK)
gpio_mode |= GPIO_OUTPUT_OK;
- if (sel != 0)
- gpio_mode = 0;
+
orion_gpio_set_valid(num, gpio_mode);
}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda..32a0993 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
@@ -190,8 +191,34 @@
return __raw_readl(S3C2410_GSTATUS1);
}
+static void s3c24xx_default_idle(void)
+{
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++)
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
+ arm_pm_idle = s3c24xx_default_idle;
+
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 32a6e39..f10768e 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -468,8 +468,10 @@
{
struct s3c2410_platform_i2c *npd;
- if (!pd)
+ if (!pd) {
pd = &default_i2c_data;
+ pd->bus_num = 0;
+ }
npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
&s3c_device_i2c0);
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
deleted file mode 100644
index 86c6f83..0000000
--- a/arch/arm/plat-spear/include/plat/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/system.h
- *
- * SPEAr platform specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SYSTEM_H
-#define __PLAT_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c
index 0fb3961..e156687 100644
--- a/arch/arm/plat-versatile/localtimer.c
+++ b/arch/arm/plat-versatile/localtimer.c
@@ -11,16 +11,42 @@
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/smp_twd.h>
#include <asm/localtimer.h>
#include <mach/irqs.h>
+const static struct of_device_id twd_of_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-twd-timer", },
+ { .compatible = "arm,cortex-a5-twd-timer", },
+ { .compatible = "arm,arm11mp-twd-timer", },
+ { },
+};
+
/*
* Setup the local clock events for a CPU.
*/
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+#if defined(CONFIG_OF)
+ static int dt_node_probed;
+
+ /* Look for TWD node only once */
+ if (!dt_node_probed) {
+ struct device_node *node = of_find_matching_node(NULL,
+ twd_of_match);
+
+ if (node)
+ twd_base = of_iomap(node, 0);
+
+ dt_node_probed = 1;
+ }
+#endif
+ if (!twd_base)
+ return -ENXIO;
+
evt->irq = IRQ_LOCALTIMER;
twd_timer_setup(evt);
return 0;
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 402a7bb..889c544 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1055,8 +1055,6 @@
return at32_usarts[id];
}
-struct platform_device *atmel_default_console_device;
-
void __init at32_setup_serial_console(unsigned int usart_id)
{
atmel_default_console_device = at32_usarts[usart_id];
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 8181293..16a24b1 100644
--- a/arch/avr32/mach-at32ap/include/mach/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -30,9 +30,6 @@
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
-#define cpu_is_at91cap9() (0)
-#define cpu_is_at91cap9_revB() (0)
-#define cpu_is_at91cap9_revC() (0)
#define cpu_is_at91sam9g10() (0)
#define cpu_is_at91sam9g20() (0)
#define cpu_is_at91sam9g45() (0)
diff --git a/arch/c6x/boot/Makefile b/arch/c6x/boot/Makefile
index ecca820..6891257 100644
--- a/arch/c6x/boot/Makefile
+++ b/arch/c6x/boot/Makefile
@@ -13,7 +13,7 @@
endif
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call cmd,dtc)
+ $(call if_changed_dep,dtc)
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index 756bde4..3c79368 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -78,7 +78,8 @@
| CF_PAGE_READABLE \
| CF_PAGE_WRITABLE \
| CF_PAGE_EXEC \
- | CF_PAGE_SYSTEM)
+ | CF_PAGE_SYSTEM \
+ | CF_PAGE_SHARED)
#define PAGE_COPY __pgprot(CF_PAGE_VALID \
| CF_PAGE_ACCESSED \
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index babd5a9..875b800 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -87,7 +87,7 @@
int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
{
- unsigned long flags, mmuar;
+ unsigned long flags, mmuar, mmutr;
struct mm_struct *mm;
pgd_t *pgd;
pmd_t *pmd;
@@ -137,9 +137,10 @@
if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
set_pte(pte, pte_wrprotect(*pte));
- mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
- (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
- >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+ mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+ if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+ mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+ mmu_write(MMUTR, mmutr);
mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S
index 863889f..281e38c 100644
--- a/arch/m68k/platform/coldfire/entry.S
+++ b/arch/m68k/platform/coldfire/entry.S
@@ -136,7 +136,7 @@
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
movel %d1,%a0
- movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
+ moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */
jne Lwork_to_do /* still work to do */
Lreturn:
@@ -148,8 +148,6 @@
btst #TIF_NEED_RESCHED,%d1
jne reschedule
- /* GERG: do we need something here for TRACEing?? */
-
Lsignal_return:
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 2156e07..1acf650 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -24,10 +24,6 @@
CONFIG_SCANLOG=m
CONFIG_PPC_SMLPAR=y
CONFIG_DTL=y
-CONFIG_PPC_ISERIES=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y
CONFIG_PPC_PASEMI_IOMMU=y
@@ -259,7 +255,6 @@
CONFIG_MLX4_EN=m
CONFIG_QLGE=m
CONFIG_BE2NET=m
-CONFIG_ISERIES_VETH=m
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 43268f1..6d42297 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -142,6 +142,11 @@
return pdev ? pci_name(pdev) : "<null>";
}
+static inline const char *eeh_driver_name(struct pci_dev *pdev)
+{
+ return (pdev && pdev->driver) ? pdev->driver->name : "<null>";
+}
+
#endif /* CONFIG_EEH */
#else /* CONFIG_PCI */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 78a2051..84cc784 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -83,8 +83,18 @@
#ifndef __ASSEMBLY__
-#define instruction_pointer(regs) ((regs)->nip)
-#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define GET_IP(regs) ((regs)->nip)
+#define GET_USP(regs) ((regs)->gpr[1])
+#define GET_FP(regs) (0)
+#define SET_FP(regs, val)
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#define profile_pc profile_pc
+#endif
+
+#include <asm-generic/ptrace.h>
+
#define kernel_stack_pointer(regs) ((regs)->gpr[1])
static inline int is_syscall_success(struct pt_regs *regs)
{
@@ -99,12 +109,6 @@
return -regs->gpr[3];
}
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
#ifdef __powerpc64__
#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
#else
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4f80cf1..3e57a00 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1213,7 +1213,7 @@
stw r3,_TRAP(r1)
2: addi r3,r1,STACK_FRAME_OVERHEAD
mr r4,r9
- bl do_signal
+ bl do_notify_resume
REST_NVGPRS(r1)
b recheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index d834425..866462c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -751,12 +751,16 @@
andi. r0,r4,_TIF_NEED_RESCHED
beq 1f
+ li r5,1
+ TRACE_AND_RESTORE_IRQ(r5);
bl .schedule
b .ret_from_except_lite
1: bl .save_nvgprs
+ li r5,1
+ TRACE_AND_RESTORE_IRQ(r5);
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_signal
+ bl .do_notify_resume
b .ret_from_except
unrecov_restore:
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index d4be7bb..15c5a4f 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -774,8 +774,8 @@
program_check_common:
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
bl .save_nvgprs
+ DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
bl .program_check_exception
b .ret_from_except
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index e3673ff..bdfb3eee 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -118,10 +118,14 @@
static inline notrace void decrementer_check_overflow(void)
{
u64 now = get_tb_or_rtc();
- u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+ u64 *next_tb;
+
+ preempt_disable();
+ next_tb = &__get_cpu_var(decrementers_next_tb);
if (now >= *next_tb)
set_dec(1);
+ preempt_enable();
}
notrace void arch_local_irq_restore(unsigned long en)
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 10a140f..64483fd 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -865,6 +865,7 @@
{
unsigned long flags;
s64 left;
+ unsigned long val;
if (!event->hw.idx || !event->hw.sample_period)
return;
@@ -880,7 +881,12 @@
event->hw.state = 0;
left = local64_read(&event->hw.period_left);
- write_pmc(event->hw.idx, left);
+
+ val = 0;
+ if (left < 0x80000000L)
+ val = 0x80000000L - left;
+
+ write_pmc(event->hw.idx, val);
perf_event_update_userpage(event);
perf_pmu_enable(event->pmu);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index ebe5766..d817ab0 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -566,12 +566,12 @@
*/
if (!__kernel_text_address(pc) ||
__get_user(instr, (unsigned int __user *)pc)) {
- printk("XXXXXXXX ");
+ printk(KERN_CONT "XXXXXXXX ");
} else {
if (regs->nip == pc)
- printk("<%08x> ", instr);
+ printk(KERN_CONT "<%08x> ", instr);
else
- printk("%08x ", instr);
+ printk(KERN_CONT "%08x ", instr);
}
pc += sizeof(int);
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 517b1d8..9f843cd 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -716,7 +716,6 @@
int cpu;
slb_set_size(SLB_MIN_SIZE);
- stop_topology_update();
printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id());
while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) &&
@@ -732,7 +731,6 @@
rc = atomic_read(&data->error);
atomic_set(&data->error, rc);
- start_topology_update();
pSeries_coalesce_init();
if (wake_when_done) {
@@ -846,6 +844,7 @@
atomic_set(&data.error, 0);
data.token = rtas_token("ibm,suspend-me");
data.complete = &done;
+ stop_topology_update();
/* Call function on all CPUs. One of us will make the
* rtas call
@@ -858,6 +857,8 @@
if (atomic_read(&data.error) != 0)
printk(KERN_ERR "Error doing global join\n");
+ start_topology_update();
+
return atomic_read(&data.error);
}
#else /* CONFIG_PPC_PSERIES */
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 2300426..ac6e437 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -11,6 +11,7 @@
#include <linux/tracehook.h>
#include <linux/signal.h>
+#include <linux/key.h>
#include <asm/hw_breakpoint.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
@@ -113,8 +114,9 @@
}
}
-static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal(struct pt_regs *regs)
{
+ sigset_t *oldset;
siginfo_t info;
int signr;
struct k_sigaction ka;
@@ -123,7 +125,7 @@
if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
- else if (!oldset)
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -191,14 +193,16 @@
return ret;
}
-void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
{
if (thread_info_flags & _TIF_SIGPENDING)
- do_signal_pending(NULL, regs);
+ do_signal(regs);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 6c0ddfc..8dde973 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -12,7 +12,7 @@
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
size_t frame_size, int is_32);
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index a70bc1e..f92b9ef 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -52,32 +52,38 @@
static unsigned int pnv_get_one_msi(struct pnv_phb *phb)
{
- unsigned int id;
+ unsigned long flags;
+ unsigned int id, rc;
- spin_lock(&phb->lock);
+ spin_lock_irqsave(&phb->lock, flags);
+
id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next);
if (id >= phb->msi_count && phb->msi_next)
id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0);
if (id >= phb->msi_count) {
- spin_unlock(&phb->lock);
- return 0;
+ rc = 0;
+ goto out;
}
__set_bit(id, phb->msi_map);
- spin_unlock(&phb->lock);
- return id + phb->msi_base;
+ rc = id + phb->msi_base;
+out:
+ spin_unlock_irqrestore(&phb->lock, flags);
+ return rc;
}
static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq)
{
+ unsigned long flags;
unsigned int id;
if (WARN_ON(hwirq < phb->msi_base ||
hwirq >= (phb->msi_base + phb->msi_count)))
return;
id = hwirq - phb->msi_base;
- spin_lock(&phb->lock);
+
+ spin_lock_irqsave(&phb->lock, flags);
__clear_bit(id, phb->msi_map);
- spin_unlock(&phb->lock);
+ spin_unlock_irqrestore(&phb->lock, flags);
}
static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 5658690..c0b40af 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -551,9 +551,9 @@
printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
"location=%s driver=%s pci addr=%s\n",
pdn->eeh_check_count, location,
- dev->driver->name, eeh_pci_name(dev));
+ eeh_driver_name(dev), eeh_pci_name(dev));
printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
- dev->driver->name);
+ eeh_driver_name(dev));
dump_stack();
}
goto dn_unlock;
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index b84a8b2..47226e0 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -24,6 +24,7 @@
#include <asm/machdep.h>
#include <asm/mmu.h>
#include <asm/rtas.h>
+#include <asm/topology.h>
static u64 stream_id;
static struct device suspend_dev;
@@ -138,8 +139,11 @@
ssleep(1);
} while (rc == -EAGAIN);
- if (!rc)
+ if (!rc) {
+ stop_topology_update();
rc = pm_suspend(PM_SUSPEND_MEM);
+ start_topology_update();
+ }
stream_id = 0;
diff --git a/arch/powerpc/platforms/wsp/ics.c b/arch/powerpc/platforms/wsp/ics.c
index 5768743..97fe82e 100644
--- a/arch/powerpc/platforms/wsp/ics.c
+++ b/arch/powerpc/platforms/wsp/ics.c
@@ -346,7 +346,7 @@
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
- ret = cache_hwirq_map(ics, d->irq, cpumask);
+ ret = cache_hwirq_map(ics, hw_irq, cpumask);
if (ret == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
diff --git a/arch/powerpc/platforms/wsp/smp.c b/arch/powerpc/platforms/wsp/smp.c
index 71bd105..0ba103a 100644
--- a/arch/powerpc/platforms/wsp/smp.c
+++ b/arch/powerpc/platforms/wsp/smp.c
@@ -71,7 +71,7 @@
static int __init smp_a2_probe(void)
{
- return cpus_weight(cpu_possible_map);
+ return num_possible_cpus();
}
static struct smp_ops_t a2_smp_ops = {
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c
index e0262cd..d24b3ac 100644
--- a/arch/powerpc/platforms/wsp/wsp_pci.c
+++ b/arch/powerpc/platforms/wsp/wsp_pci.c
@@ -468,15 +468,15 @@
#define DUMP_REG(x) \
pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
-#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
- /* WSP DD1 has a bogus class code by default in the PCI-E
- * root complex's built-in P2P bridge */
+ /*
+ * Some WSP variants has a bogus class code by default in the PCI-E
+ * root complex's built-in P2P bridge
+ */
val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
(val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
-#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
/* XXX Disable TCE caching, it doesn't work on DD1 */
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 30eb17e..6073288 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -385,26 +385,36 @@
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
- int i;
+ int i, is_pcie = 0, no_link;
- if ((bus->parent == hose->bus) &&
- ((fsl_pcie_bus_fixup &&
- early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
- (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
- {
- for (i = 0; i < 4; ++i) {
+ /* The root complex bridge comes up with bogus resources,
+ * we copy the PHB ones in.
+ *
+ * With the current generic PCI code, the PHB bus no longer
+ * has bus->resource[0..4] set, so things are a bit more
+ * tricky.
+ */
+
+ if (fsl_pcie_bus_fixup)
+ is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
+ no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
+
+ if (bus->parent == hose->bus && (is_pcie || no_link)) {
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
struct resource *res = bus->resource[i];
- struct resource *par = bus->parent->resource[i];
- if (res) {
- res->start = 0;
- res->end = 0;
- res->flags = 0;
- }
- if (res && par) {
- res->start = par->start;
- res->end = par->end;
- res->flags = par->flags;
- }
+ struct resource *par;
+
+ if (!res)
+ continue;
+ if (i == 0)
+ par = &hose->io_resource;
+ else if (i < 4)
+ par = &hose->mem_resources[i-1];
+ else par = NULL;
+
+ res->start = par ? par->start : 0;
+ res->end = par ? par->end : 0;
+ res->flags = par ? par->flags : 0;
}
}
}
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 18c51df..ff605a3 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -662,7 +662,7 @@
ENTRY(sys32_poll_wrapper)
llgtr %r2,%r2 # struct pollfd *
llgfr %r3,%r3 # unsigned int
- lgfr %r4,%r4 # long
+ lgfr %r4,%r4 # int
jg sys_poll # branch to system call
ENTRY(sys32_setresgid16_wrapper)
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 3201ae4..4261aa7 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -76,7 +76,6 @@
if (test_thread_flag(TIF_MCCK_PENDING)) {
local_mcck_enable();
local_irq_enable();
- s390_handle_mcck();
return;
}
trace_hardirqs_on();
@@ -93,10 +92,12 @@
for (;;) {
tick_nohz_idle_enter();
rcu_idle_enter();
- while (!need_resched())
+ while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING))
default_idle();
rcu_idle_exit();
tick_nohz_idle_exit();
+ if (test_thread_flag(TIF_MCCK_PENDING))
+ s390_handle_mcck();
preempt_enable_no_resched();
schedule();
preempt_disable();
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index fa02f44..14da278 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -113,11 +113,14 @@
static int s390_next_ktime(ktime_t expires,
struct clock_event_device *evt)
{
+ struct timespec ts;
u64 nsecs;
- nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset()));
+ ts.tv_sec = ts.tv_nsec = 0;
+ monotonic_to_bootbased(&ts);
+ nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
do_div(nsecs, 125);
- S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9);
+ S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 9a4d02f..51b0738 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -574,7 +574,7 @@
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
mp = (struct gmap_pgtable *) page->index;
BUG_ON(!list_empty(&mp->mapper));
- pgtable_page_ctor(page);
+ pgtable_page_dtor(page);
atomic_set(&page->_mapcount, -1);
kfree(mp);
__free_page(page);
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 0838154..24b1ee4 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -169,6 +169,11 @@
.end = 0xfee00fff,
.flags = IORESOURCE_MEM,
}, {
+ /* TSU */
+ .start = 0xfee01800,
+ .end = 0xfee01fff,
+ .flags = IORESOURCE_MEM,
+ }, {
.start = 316,
.end = 316,
.flags = IORESOURCE_IRQ,
@@ -210,20 +215,13 @@
},
};
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- }
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .dma = &sh7757lcr_mmcif_dma,
.sup_pclk = 0x0f,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NONREMOVABLE,
.ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 6418e95..ebd0f81 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 033ef2b..cde7c00 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -29,9 +29,11 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <media/mt9t112.h>
#include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 2a18b06..5b382e1 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -22,6 +22,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
#include <media/sh_mobile_ceu.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 68c3d6f..d37ba27 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -21,9 +21,11 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <media/ov772x.h>
+#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <asm/clock.h>
#include <asm/machvec.h>
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 036fe1a..2b07fc0 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -24,6 +24,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <sound/sh_fsi.h>
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index fa7b978..fb8f1499 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -74,7 +74,7 @@
{ SH4_PCIINT_MLCK, "master lock error" },
{ SH4_PCIINT_TABT, "target-target abort" },
{ SH4_PCIINT_TRET, "target retry time out" },
- { SH4_PCIINT_MFDE, "master function disable erorr" },
+ { SH4_PCIINT_MFDE, "master function disable error" },
{ SH4_PCIINT_PRTY, "address parity error" },
{ SH4_PCIINT_SERR, "SERR" },
{ SH4_PCIINT_TWDP, "data parity error for target write" },
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index a1c9c0d..071bcb4 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -3,9 +3,10 @@
*
* This file is released under the GPLv2
*/
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
struct platform_device;
/* allocate contiguous memory chunk and fill in struct resource */
@@ -14,5 +15,4 @@
void plat_early_device_setup(void);
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index b3c039a..70bd966 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -343,7 +343,7 @@
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
- CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+ CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index a7b2da6..2875e8b 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -133,7 +133,7 @@
[0] = {
.start = 0xfe002000,
.end = 0xfe0020ff,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
},
[1] = {
.start = 86,
@@ -661,6 +661,25 @@
.resource = spi0_resources,
};
+static struct resource spi1_resources[] = {
+ {
+ .start = 0xffd8ee70,
+ .end = 0xffd8eeff,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+ },
+ {
+ .start = 54,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device spi1_device = {
+ .name = "sh_spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+ .resource = spi1_resources,
+};
+
static struct resource usb_ehci_resources[] = {
[0] = {
.start = 0xfe4f1000,
@@ -720,6 +739,7 @@
&dma2_device,
&dma3_device,
&spi0_device,
+ &spi1_device,
&usb_ehci_device,
&usb_ohci_device,
};
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 3147a9a..f624174 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -63,7 +63,7 @@
mp_ops->prepare_cpus(max_cpus);
#ifndef CONFIG_HOTPLUG_CPU
- init_cpu_present(&cpu_possible_map);
+ init_cpu_present(cpu_possible_mask);
#endif
}
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 4649a6f..772caff 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -27,7 +27,7 @@
* Presently all SH-X3 SMP cores are multi-cores, so just keep it
* simple until we have a method for determining topology..
*/
- return cpu_possible_map;
+ return *cpu_possible_mask;
}
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index ae08cbb..949e2d3 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -23,6 +23,7 @@
#define MAX_OCACHE_PAGES 32
#define MAX_ICACHE_PAGES 32
+#ifdef CONFIG_CACHE_WRITEBACK
static void sh2a_flush_oc_line(unsigned long v, int way)
{
unsigned long addr = (v & 0x000007f0) | (way << 11);
@@ -34,6 +35,7 @@
__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
}
}
+#endif
static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
{
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index a295718..2479049 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -30,9 +30,10 @@
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
extern void math_state_restore(void);
-extern void __math_state_restore(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
+DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
+
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
@@ -212,19 +213,11 @@
#endif /* CONFIG_X86_64 */
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
-#endif
-
/*
- * These must be called with preempt disabled
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact.
*/
-static inline void fpu_save_init(struct fpu *fpu)
+static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
@@ -233,33 +226,33 @@
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
- return;
+ return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
- return;
+ return 0;
}
- if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+ /*
+ * If exceptions are pending, we need to clear them so
+ * that we don't randomly get exceptions later.
+ *
+ * FIXME! Is this perhaps only true for the old-style
+ * irq13 case? Maybe we could leave the x87 state
+ * intact otherwise?
+ */
+ if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
-
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- ASM_NOP8 ASM_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %P[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
+ return 0;
+ }
+ return 1;
}
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline int __save_init_fpu(struct task_struct *tsk)
{
- fpu_save_init(&tsk->thread.fpu);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
@@ -277,33 +270,152 @@
static inline int restore_fpu_checking(struct task_struct *tsk)
{
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. "m" is a random variable that should be in L1 */
+ alternative_input(
+ ASM_NOP8 ASM_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %P[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (tsk->thread.fpu.has_fpu));
+
return fpu_restore_checking(&tsk->thread.fpu);
}
/*
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
+ */
+static inline int __thread_has_fpu(struct task_struct *tsk)
+{
+ return tsk->thread.fpu.has_fpu;
+}
+
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
+{
+ tsk->thread.fpu.has_fpu = 0;
+ percpu_write(fpu_owner_task, NULL);
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
+{
+ tsk->thread.fpu.has_fpu = 1;
+ percpu_write(fpu_owner_task, tsk);
+}
+
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct task_struct *tsk)
+{
+ __thread_clear_has_fpu(tsk);
+ stts();
+}
+
+static inline void __thread_fpu_begin(struct task_struct *tsk)
+{
+ clts();
+ __thread_set_has_fpu(tsk);
+}
+
+/*
+ * FPU state switching for scheduling.
+ *
+ * This is a two-stage process:
+ *
+ * - switch_fpu_prepare() saves the old state and
+ * sets the new state of the CR0.TS bit. This is
+ * done within the context of the old process.
+ *
+ * - switch_fpu_finish() restores the new state as
+ * necessary.
+ */
+typedef struct { int preload; } fpu_switch_t;
+
+/*
+ * FIXME! We could do a totally lazy restore, but we need to
+ * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU" variable, and the task needs to have a "I last
+ * touched the FPU on this CPU" and check them.
+ *
+ * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * false, but some day..
+ */
+static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
+{
+ return new == percpu_read_stable(fpu_owner_task) &&
+ cpu == new->thread.fpu.last_cpu;
+}
+
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
+{
+ fpu_switch_t fpu;
+
+ fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+ if (__thread_has_fpu(old)) {
+ if (!__save_init_fpu(old))
+ cpu = ~0;
+ old->thread.fpu.last_cpu = cpu;
+ old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
+
+ /* Don't change CR0.TS if we just switch! */
+ if (fpu.preload) {
+ new->fpu_counter++;
+ __thread_set_has_fpu(new);
+ prefetch(new->thread.fpu.state);
+ } else
+ stts();
+ } else {
+ old->fpu_counter = 0;
+ old->thread.fpu.last_cpu = ~0;
+ if (fpu.preload) {
+ new->fpu_counter++;
+ if (fpu_lazy_restore(new, cpu))
+ fpu.preload = 0;
+ else
+ prefetch(new->thread.fpu.state);
+ __thread_fpu_begin(new);
+ }
+ }
+ return fpu;
+}
+
+/*
+ * By the time this gets called, we've already cleared CR0.TS and
+ * given the process the FPU if we are going to preload the FPU
+ * state - all we need to do is to conditionally restore the register
+ * state itself.
+ */
+static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
+{
+ if (fpu.preload) {
+ if (unlikely(restore_fpu_checking(new)))
+ __thread_fpu_end(new);
+ }
+}
+
+/*
* Signal frame handlers...
*/
extern int save_i387_xstate(void __user *buf);
extern int restore_i387_xstate(void __user *buf);
-static inline void __unlazy_fpu(struct task_struct *tsk)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
-}
-
static inline void __clear_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ __thread_fpu_end(tsk);
}
}
@@ -311,14 +423,14 @@
* Were we in an interrupt that interrupted kernel mode?
*
* We can do a kernel_fpu_begin/end() pair *ONLY* if that
- * pair does nothing at all: TS_USEDFPU must be clear (so
+ * pair does nothing at all: the thread must not have fpu (so
* that we don't try to save the FPU state), and TS must
* be set (so that the clts/stts pair does nothing that is
* visible in the interrupted kernel thread).
*/
static inline bool interrupted_kernel_fpu_idle(void)
{
- return !(current_thread_info()->status & TS_USEDFPU) &&
+ return !__thread_has_fpu(current) &&
(read_cr0() & X86_CR0_TS);
}
@@ -352,14 +464,18 @@
static inline void kernel_fpu_begin(void)
{
- struct thread_info *me = current_thread_info();
+ struct task_struct *me = current;
WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
+ if (__thread_has_fpu(me)) {
+ __save_init_fpu(me);
+ __thread_clear_has_fpu(me);
+ /* We do 'stts()' in kernel_fpu_end() */
+ } else {
+ percpu_write(fpu_owner_task, NULL);
clts();
+ }
}
static inline void kernel_fpu_end(void)
@@ -400,21 +516,64 @@
}
/*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+ return __thread_has_fpu(current);
+}
+
+static inline void user_fpu_end(void)
+{
+ preempt_disable();
+ __thread_fpu_end(current);
+ preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+ preempt_disable();
+ if (!user_has_fpu())
+ __thread_fpu_begin(current);
+ preempt_enable();
+}
+
+/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
- WARN_ON_ONCE(task_thread_info(tsk)->status & TS_USEDFPU);
+ WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
- stts();
+ __thread_fpu_end(tsk);
preempt_enable();
}
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
- __unlazy_fpu(tsk);
+ if (__thread_has_fpu(tsk)) {
+ __save_init_fpu(tsk);
+ __thread_fpu_end(tsk);
+ } else
+ tsk->fpu_counter = 0;
preempt_enable();
}
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index aa9088c..58545c9 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -374,6 +374,8 @@
};
struct fpu {
+ unsigned int last_cpu;
+ unsigned int has_fpu;
union thread_xstate *state;
};
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index bc817cd..cfd8144 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -247,8 +247,6 @@
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
-#define TS_USEDFPU 0x0001 /* FPU was used by this task
- this quantum (SMP) */
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
#define TS_POLLING 0x0004 /* idle task polling need_resched,
skip sending interrupt */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d43cad7..c0f7d68 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1044,6 +1044,9 @@
DEFINE_PER_CPU(unsigned int, irq_count) = -1;
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
+
/*
* Special IST stacks which the CPU switches to when it calls
* an IST-marked descriptor entry. Up to 7 stacks (hardware
@@ -1111,6 +1114,8 @@
DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
EXPORT_PER_CPU_SYMBOL(current_task);
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
#ifdef CONFIG_CC_STACKPROTECTOR
DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 485204f..c08d1ff 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -214,6 +214,7 @@
task_user_gs(p) = get_user_gs(regs);
+ p->fpu_counter = 0;
p->thread.io_bitmap_ptr = NULL;
tsk = current;
err = -ENOMEM;
@@ -299,22 +300,11 @@
*next = &next_p->thread;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
- bool preload_fpu;
+ fpu_switch_t fpu;
/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- __unlazy_fpu(prev_p);
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p, cpu);
/*
* Reload esp0.
@@ -354,11 +344,6 @@
task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
__switch_to_xtra(prev_p, next_p, tss);
- /* If we're going to preload the fpu context, make sure clts
- is run while we're batching the cpu state updates. */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
@@ -368,15 +353,14 @@
*/
arch_end_context_switch(next_p);
- if (preload_fpu)
- __math_state_restore();
-
/*
* Restore %gs if needed (which is common)
*/
if (prev->gs | next->gs)
lazy_load_gs(next->gs);
+ switch_fpu_finish(next_p, fpu);
+
percpu_write(current_task, next_p);
return prev_p;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 9b9fe4a..cfa5c90 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -286,6 +286,7 @@
set_tsk_thread_flag(p, TIF_FORK);
+ p->fpu_counter = 0;
p->thread.io_bitmap_ptr = NULL;
savesegment(gs, p->thread.gsindex);
@@ -386,18 +387,9 @@
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
unsigned fsindex, gsindex;
- bool preload_fpu;
+ fpu_switch_t fpu;
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p, cpu);
/*
* Reload esp0, LDT and the page table pointer:
@@ -427,13 +419,6 @@
load_TLS(next, cpu);
- /* Must be after DS reload */
- __unlazy_fpu(prev_p);
-
- /* Make sure cpu is ready for new context */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
@@ -474,6 +459,8 @@
wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
prev->gsindex = gsindex;
+ switch_fpu_finish(next_p, fpu);
+
/*
* Switch the PDA and FPU contexts.
*/
@@ -492,13 +479,6 @@
task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
__switch_to_xtra(prev_p, next_p, tss);
- /*
- * Preload the FPU context, now that we've determined that the
- * task is likely to be using it.
- */
- if (preload_fpu)
- __math_state_restore();
-
return prev_p;
}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 8ba27db..4bbe04d 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -571,28 +571,6 @@
}
/*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use. Used during context switch.
- */
-void __math_state_restore(void)
-{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
-
- /*
- * Paranoid restore. send a SIGSEGV if we fail to restore the state.
- */
- if (unlikely(restore_fpu_checking(tsk))) {
- stts();
- force_sig(SIGSEGV, tsk);
- return;
- }
-
- thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
- tsk->fpu_counter++;
-}
-
-/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*
@@ -604,8 +582,7 @@
*/
void math_state_restore(void)
{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
+ struct task_struct *tsk = current;
if (!tsk_used_math(tsk)) {
local_irq_enable();
@@ -622,16 +599,23 @@
local_irq_disable();
}
- clts(); /* Allow maths ops (or we recurse) */
+ __thread_fpu_begin(tsk);
+ /*
+ * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+ */
+ if (unlikely(restore_fpu_checking(tsk))) {
+ __thread_fpu_end(tsk);
+ force_sig(SIGSEGV, tsk);
+ return;
+ }
- __math_state_restore();
+ tsk->fpu_counter++;
}
EXPORT_SYMBOL_GPL(math_state_restore);
dotraplinkage void __kprobes
do_device_not_available(struct pt_regs *regs, long error_code)
{
- WARN_ON_ONCE(!user_mode_vm(regs));
#ifdef CONFIG_MATH_EMULATION
if (read_cr0() & X86_CR0_EM) {
struct math_emu_info info = { };
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index a391134..7110911 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -47,7 +47,7 @@
if (!fx)
return;
- BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+ BUG_ON(__thread_has_fpu(tsk));
xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
@@ -168,7 +168,7 @@
if (!used_math())
return 0;
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (user_has_fpu()) {
if (use_xsave())
err = xsave_user(buf);
else
@@ -176,8 +176,7 @@
if (err)
return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ user_fpu_end();
} else {
sanitize_i387_state(tsk);
if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
@@ -292,10 +291,7 @@
return err;
}
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
+ user_fpu_begin();
if (use_xsave())
err = restore_user_xstate(buf);
else
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index d29216c..3b4c8d8 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1457,7 +1457,7 @@
#ifdef CONFIG_X86_64
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
#endif
- if (current_thread_info()->status & TS_USEDFPU)
+ if (__thread_has_fpu(current))
clts();
load_gdt(&__get_cpu_var(host_gdt));
}
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 492ade8..d99346e 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -374,7 +374,7 @@
int __init pci_xen_hvm_init(void)
{
- if (!xen_feature(XENFEAT_hvm_pirqs))
+ if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
return 0;
#ifdef CONFIG_ACPI
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 041d4fe..501d4e0 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -409,6 +409,13 @@
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
cpu_bringup();
+ /*
+ * Balance out the preempt calls - as we are running in cpu_idle
+ * loop which has been called at bootup from cpu_bringup_and_idle.
+ * The cpucpu_bringup_and_idle called cpu_bringup which made a
+ * preempt_disable() So this preempt_enable will balance it out.
+ */
+ preempt_enable();
}
#else /* !CONFIG_HOTPLUG_CPU */
diff --git a/crypto/sha512_generic.c b/crypto/sha512_generic.c
index f04af93..107f6f7 100644
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -31,11 +31,6 @@
return (x & y) | (z & (x | y));
}
-static inline u64 RORu64(u64 x, u64 y)
-{
- return (x >> y) | (x << (64 - y));
-}
-
static const u64 sha512_K[80] = {
0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, 0xb5c0fbcfec4d3b2fULL,
0xe9b5dba58189dbbcULL, 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
@@ -66,10 +61,10 @@
0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL,
};
-#define e0(x) (RORu64(x,28) ^ RORu64(x,34) ^ RORu64(x,39))
-#define e1(x) (RORu64(x,14) ^ RORu64(x,18) ^ RORu64(x,41))
-#define s0(x) (RORu64(x, 1) ^ RORu64(x, 8) ^ (x >> 7))
-#define s1(x) (RORu64(x,19) ^ RORu64(x,61) ^ (x >> 6))
+#define e0(x) (ror64(x,28) ^ ror64(x,34) ^ ror64(x,39))
+#define e1(x) (ror64(x,14) ^ ror64(x,18) ^ ror64(x,41))
+#define s0(x) (ror64(x, 1) ^ ror64(x, 8) ^ (x >> 7))
+#define s1(x) (ror64(x,19) ^ ror64(x,61) ^ (x >> 6))
static inline void LOAD_OP(int I, u64 *W, const u8 *input)
{
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 54eaf96..01c2cf4 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -497,37 +497,22 @@
}
/**
- * amba_device_register - register an AMBA device
- * @dev: AMBA device to register
- * @parent: parent memory resource
+ * amba_device_add - add a previously allocated AMBA device structure
+ * @dev: AMBA device allocated by amba_device_alloc
+ * @parent: resource parent for this devices resources
*
- * Setup the AMBA device, reading the cell ID if present.
- * Claim the resource, and register the AMBA device with
- * the Linux device manager.
+ * Claim the resource, and read the device cell ID if not already
+ * initialized. Register the AMBA device with the Linux device
+ * manager.
*/
-int amba_device_register(struct amba_device *dev, struct resource *parent)
+int amba_device_add(struct amba_device *dev, struct resource *parent)
{
u32 size;
void __iomem *tmp;
int i, ret;
- device_initialize(&dev->dev);
-
- /*
- * Copy from device_add
- */
- if (dev->dev.init_name) {
- dev_set_name(&dev->dev, "%s", dev->dev.init_name);
- dev->dev.init_name = NULL;
- }
-
- dev->dev.release = amba_device_release;
- dev->dev.bus = &amba_bustype;
- dev->dev.dma_mask = &dev->dma_mask;
- dev->res.name = dev_name(&dev->dev);
-
- if (!dev->dev.coherent_dma_mask && dev->dma_mask)
- dev_warn(&dev->dev, "coherent dma mask is unset\n");
+ WARN_ON(dev->irq[0] == (unsigned int)-1);
+ WARN_ON(dev->irq[1] == (unsigned int)-1);
ret = request_resource(parent, &dev->res);
if (ret)
@@ -582,9 +567,9 @@
if (ret)
goto err_release;
- if (dev->irq[0] != NO_IRQ)
+ if (dev->irq[0] && dev->irq[0] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq0);
- if (ret == 0 && dev->irq[1] != NO_IRQ)
+ if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq1);
if (ret == 0)
return ret;
@@ -596,6 +581,74 @@
err_out:
return ret;
}
+EXPORT_SYMBOL_GPL(amba_device_add);
+
+static void amba_device_initialize(struct amba_device *dev, const char *name)
+{
+ device_initialize(&dev->dev);
+ if (name)
+ dev_set_name(&dev->dev, "%s", name);
+ dev->dev.release = amba_device_release;
+ dev->dev.bus = &amba_bustype;
+ dev->dev.dma_mask = &dev->dma_mask;
+ dev->res.name = dev_name(&dev->dev);
+}
+
+/**
+ * amba_device_alloc - allocate an AMBA device
+ * @name: sysfs name of the AMBA device
+ * @base: base of AMBA device
+ * @size: size of AMBA device
+ *
+ * Allocate and initialize an AMBA device structure. Returns %NULL
+ * on failure.
+ */
+struct amba_device *amba_device_alloc(const char *name, resource_size_t base,
+ size_t size)
+{
+ struct amba_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev) {
+ amba_device_initialize(dev, name);
+ dev->res.start = base;
+ dev->res.end = base + size - 1;
+ dev->res.flags = IORESOURCE_MEM;
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(amba_device_alloc);
+
+/**
+ * amba_device_register - register an AMBA device
+ * @dev: AMBA device to register
+ * @parent: parent memory resource
+ *
+ * Setup the AMBA device, reading the cell ID if present.
+ * Claim the resource, and register the AMBA device with
+ * the Linux device manager.
+ */
+int amba_device_register(struct amba_device *dev, struct resource *parent)
+{
+ amba_device_initialize(dev, dev->dev.init_name);
+ dev->dev.init_name = NULL;
+
+ if (!dev->dev.coherent_dma_mask && dev->dma_mask)
+ dev_warn(&dev->dev, "coherent dma mask is unset\n");
+
+ return amba_device_add(dev, parent);
+}
+
+/**
+ * amba_device_put - put an AMBA device
+ * @dev: AMBA device to put
+ */
+void amba_device_put(struct amba_device *dev)
+{
+ put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(amba_device_put);
/**
* amba_device_unregister - unregister an AMBA device
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index a7d91a7..53d3770 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -207,11 +207,11 @@
{
int ret = 0;
int use_iordy;
+ struct sam9_smc_config smc;
unsigned int t6z; /* data tristate time in ns */
unsigned int cycle; /* SMC Cycle width in MCK ticks */
unsigned int setup; /* SMC Setup width in MCK ticks */
unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
- unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
unsigned int tdf_cycles; /* SMC TDF MCK ticks */
unsigned long mck_hz; /* MCK frequency in Hz */
@@ -244,26 +244,20 @@
}
dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
- info->mode |= AT91_SMC_TDF_(tdf_cycles);
- /* write SMC Setup Register */
- at91_sys_write(AT91_SMC_SETUP(info->cs),
- AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(cs_setup) |
- AT91_SMC_NCS_RDSETUP_(cs_setup));
- /* write SMC Pulse Register */
- at91_sys_write(AT91_SMC_PULSE(info->cs),
- AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cs_pulse) |
- AT91_SMC_NCS_RDPULSE_(cs_pulse));
- /* write SMC Cycle Register */
- at91_sys_write(AT91_SMC_CYCLE(info->cs),
- AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
- /* write SMC Mode Register*/
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+ /* SMC Setup Register */
+ smc.nwe_setup = smc.nrd_setup = setup;
+ smc.ncs_write_setup = smc.ncs_read_setup = 0;
+ /* SMC Pulse Register */
+ smc.nwe_pulse = smc.nrd_pulse = pulse;
+ smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
+ /* SMC Cycle Register */
+ smc.write_cycle = smc.read_cycle = cycle;
+ /* SMC Mode Register*/
+ smc.tdf_cycles = tdf_cycles;
+ smc.mode = info->mode;
+
+ sam9_smc_configure(0, info->cs, &smc);
}
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -288,20 +282,20 @@
struct at91_ide_info *info = dev->link->ap->host->private_data;
unsigned int consumed;
unsigned long flags;
- unsigned int mode;
+ struct sam9_smc_config smc;
local_irq_save(flags);
- mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+ sam9_smc_read_mode(0, info->cs, &smc);
/* set 16bit mode before writing data */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
+ sam9_smc_write_mode(0, info->cs, &smc);
consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
/* restore 8bit mode after data is written */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
+ sam9_smc_write_mode(0, info->cs, &smc);
local_irq_restore(flags);
return consumed;
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index 1ead661..d1daa5e 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -53,7 +53,7 @@
for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++) {
val = regcache_get_val(map->reg_defaults_raw,
i, map->cache_word_size);
- if (!val)
+ if (regmap_volatile(map, i))
continue;
count++;
}
@@ -70,7 +70,7 @@
for (i = 0, j = 0; i < map->num_reg_defaults_raw; i++) {
val = regcache_get_val(map->reg_defaults_raw,
i, map->cache_word_size);
- if (!val)
+ if (regmap_volatile(map, i))
continue;
map->reg_defaults[j].reg = i;
map->reg_defaults[j].def = val;
diff --git a/drivers/block/nvme.c b/drivers/block/nvme.c
index c1dc4d8..1f3c1a7 100644
--- a/drivers/block/nvme.c
+++ b/drivers/block/nvme.c
@@ -41,6 +41,8 @@
#include <linux/types.h>
#include <linux/version.h>
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define NVME_Q_DEPTH 1024
#define SQ_SIZE(depth) (depth * sizeof(struct nvme_command))
#define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion))
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index 7dbc4a8..78a666d 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -1,7 +1,7 @@
config CPU_IDLE
bool "CPU idle PM support"
- default ACPI
+ default y if ACPI || PPC_PSERIES
help
CPU idle is a generic framework for supporting software-controlled
idle processor power management. It includes modular cross-platform
diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c
index aa08497..73f55e200 100644
--- a/drivers/edac/i3200_edac.c
+++ b/drivers/edac/i3200_edac.c
@@ -15,6 +15,8 @@
#include <linux/io.h>
#include "edac_core.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define I3200_REVISION "1.1"
#define EDAC_MOD_STR "i3200_edac"
@@ -101,19 +103,6 @@
static int nr_channels;
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
static int how_many_channels(struct pci_dev *pdev)
{
unsigned char capid0_8b; /* 8th byte of CAPID0 */
diff --git a/drivers/gpu/drm/exynos/exynos_drm_core.c b/drivers/gpu/drm/exynos/exynos_drm_core.c
index 661a035..d08a558 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_core.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_core.c
@@ -193,6 +193,9 @@
return err;
}
+ /* setup possible_clones. */
+ exynos_drm_encoder_setup(drm_dev);
+
/*
* if any specific driver such as fimd or hdmi driver called
* exynos_drm_subdrv_register() later than drm_load(),
diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index e3861ac..de81883 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -307,9 +307,6 @@
*/
event->pipe = exynos_crtc->pipe;
- list_add_tail(&event->base.link,
- &dev_priv->pageflip_event_list);
-
ret = drm_vblank_get(dev, exynos_crtc->pipe);
if (ret) {
DRM_DEBUG("failed to acquire vblank counter\n");
@@ -318,6 +315,9 @@
goto out;
}
+ list_add_tail(&event->base.link,
+ &dev_priv->pageflip_event_list);
+
crtc->fb = fb;
ret = exynos_drm_crtc_update(crtc);
if (ret) {
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index 35889ca..58820eb 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -33,6 +33,7 @@
#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
+#include "exynos_drm_encoder.h"
#include "exynos_drm_fbdev.h"
#include "exynos_drm_fb.h"
#include "exynos_drm_gem.h"
@@ -99,6 +100,9 @@
if (ret)
goto err_vblank;
+ /* setup possible_clones. */
+ exynos_drm_encoder_setup(dev);
+
/*
* create and configure fb helper and also exynos specific
* fbdev object.
@@ -141,16 +145,21 @@
}
static void exynos_drm_preclose(struct drm_device *dev,
- struct drm_file *file_priv)
+ struct drm_file *file)
{
- struct exynos_drm_private *dev_priv = dev->dev_private;
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
- /*
- * drm framework frees all events at release time,
- * so private event list should be cleared.
- */
- if (!list_empty(&dev_priv->pageflip_event_list))
- INIT_LIST_HEAD(&dev_priv->pageflip_event_list);
+}
+
+static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (!file->driver_priv)
+ return;
+
+ kfree(file->driver_priv);
+ file->driver_priv = NULL;
}
static void exynos_drm_lastclose(struct drm_device *dev)
@@ -195,6 +204,7 @@
.unload = exynos_drm_unload,
.preclose = exynos_drm_preclose,
.lastclose = exynos_drm_lastclose,
+ .postclose = exynos_drm_postclose,
.get_vblank_counter = drm_vblank_count,
.enable_vblank = exynos_drm_crtc_enable_vblank,
.disable_vblank = exynos_drm_crtc_disable_vblank,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
index 86b93dd..ef4754f 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
@@ -195,6 +195,40 @@
.destroy = exynos_drm_encoder_destroy,
};
+static unsigned int exynos_drm_encoder_clones(struct drm_encoder *encoder)
+{
+ struct drm_encoder *clone;
+ struct drm_device *dev = encoder->dev;
+ struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+ struct exynos_drm_display_ops *display_ops =
+ exynos_encoder->manager->display_ops;
+ unsigned int clone_mask = 0;
+ int cnt = 0;
+
+ list_for_each_entry(clone, &dev->mode_config.encoder_list, head) {
+ switch (display_ops->type) {
+ case EXYNOS_DISPLAY_TYPE_LCD:
+ case EXYNOS_DISPLAY_TYPE_HDMI:
+ clone_mask |= (1 << (cnt++));
+ break;
+ default:
+ continue;
+ }
+ }
+
+ return clone_mask;
+}
+
+void exynos_drm_encoder_setup(struct drm_device *dev)
+{
+ struct drm_encoder *encoder;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+ encoder->possible_clones = exynos_drm_encoder_clones(encoder);
+}
+
struct drm_encoder *
exynos_drm_encoder_create(struct drm_device *dev,
struct exynos_drm_manager *manager,
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.h b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
index 97b087a..eb7d231 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.h
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.h
@@ -30,6 +30,7 @@
struct exynos_drm_manager;
+void exynos_drm_encoder_setup(struct drm_device *dev);
struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev,
struct exynos_drm_manager *mgr,
unsigned int possible_crtcs);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
index d7ae29d..3508700 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
@@ -195,66 +195,6 @@
return ret;
}
-static bool
-exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb,
- struct drm_fb_helper_surface_size *sizes)
-{
- if (fb->width != sizes->surface_width)
- return false;
- if (fb->height != sizes->surface_height)
- return false;
- if (fb->bits_per_pixel != sizes->surface_bpp)
- return false;
- if (fb->depth != sizes->surface_depth)
- return false;
-
- return true;
-}
-
-static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper,
- struct drm_fb_helper_surface_size *sizes)
-{
- struct drm_device *dev = helper->dev;
- struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper);
- struct exynos_drm_gem_obj *exynos_gem_obj;
- struct drm_framebuffer *fb = helper->fb;
- struct drm_mode_fb_cmd2 mode_cmd = { 0 };
- unsigned long size;
-
- DRM_DEBUG_KMS("%s\n", __FILE__);
-
- if (exynos_drm_fbdev_is_samefb(fb, sizes))
- return 0;
-
- mode_cmd.width = sizes->surface_width;
- mode_cmd.height = sizes->surface_height;
- mode_cmd.pitches[0] = sizes->surface_width * (sizes->surface_bpp >> 3);
- mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
- sizes->surface_depth);
-
- if (exynos_fbdev->exynos_gem_obj)
- exynos_drm_gem_destroy(exynos_fbdev->exynos_gem_obj);
-
- if (fb->funcs->destroy)
- fb->funcs->destroy(fb);
-
- size = mode_cmd.pitches[0] * mode_cmd.height;
- exynos_gem_obj = exynos_drm_gem_create(dev, size);
- if (IS_ERR(exynos_gem_obj))
- return PTR_ERR(exynos_gem_obj);
-
- exynos_fbdev->exynos_gem_obj = exynos_gem_obj;
-
- helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd,
- &exynos_gem_obj->base);
- if (IS_ERR_OR_NULL(helper->fb)) {
- DRM_ERROR("failed to create drm framebuffer.\n");
- return PTR_ERR(helper->fb);
- }
-
- return exynos_drm_fbdev_update(helper, helper->fb);
-}
-
static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
struct drm_fb_helper_surface_size *sizes)
{
@@ -262,6 +202,10 @@
DRM_DEBUG_KMS("%s\n", __FILE__);
+ /*
+ * with !helper->fb, it means that this funcion is called first time
+ * and after that, the helper->fb would be used as clone mode.
+ */
if (!helper->fb) {
ret = exynos_drm_fbdev_create(helper, sizes);
if (ret < 0) {
@@ -274,12 +218,6 @@
* because register_framebuffer() should be called.
*/
ret = 1;
- } else {
- ret = exynos_drm_fbdev_recreate(helper, sizes);
- if (ret < 0) {
- DRM_ERROR("failed to reconfigure fbdev\n");
- return ret;
- }
}
return ret;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index b6a737d..0dbb32b 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -604,7 +604,12 @@
}
if (is_checked) {
- drm_vblank_put(drm_dev, crtc);
+ /*
+ * call drm_vblank_put only in case that drm_vblank_get was
+ * called.
+ */
+ if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+ drm_vblank_put(drm_dev, crtc);
/*
* don't off vblank if vblank_disable_allowed is 1,
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index ac24cff..93846e8 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -712,7 +712,12 @@
}
if (is_checked)
- drm_vblank_put(drm_dev, crtc);
+ /*
+ * call drm_vblank_put only in case that drm_vblank_get was
+ * called.
+ */
+ if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+ drm_vblank_put(drm_dev, crtc);
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
}
@@ -779,15 +784,15 @@
mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST,
MXR_STATUS_BURST_MASK);
- /* setting default layer priority: layer1 > video > layer0
+ /* setting default layer priority: layer1 > layer0 > video
* because typical usage scenario would be
+ * layer1 - OSD
* layer0 - framebuffer
* video - video overlay
- * layer1 - OSD
*/
- val = MXR_LAYER_CFG_GRP0_VAL(1);
- val |= MXR_LAYER_CFG_VP_VAL(2);
- val |= MXR_LAYER_CFG_GRP1_VAL(3);
+ val = MXR_LAYER_CFG_GRP1_VAL(3);
+ val |= MXR_LAYER_CFG_GRP0_VAL(2);
+ val |= MXR_LAYER_CFG_VP_VAL(1);
mixer_reg_write(res, MXR_LAYER_CFG, val);
/* setting background color */
@@ -1044,7 +1049,7 @@
platform_get_drvdata(pdev);
struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx;
- dev_info(dev, "remove sucessful\n");
+ dev_info(dev, "remove successful\n");
mixer_resource_poweroff(ctx);
mixer_resources_cleanup(ctx);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c3afb78..03c53fc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3028,6 +3028,20 @@
#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
#define DISP_FBC_WM_DIS (1<<15)
+/* GEN7 chicken */
+#define GEN7_COMMON_SLICE_CHICKEN1 0x7010
+# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))
+
+#define GEN7_L3CNTLREG1 0xB01C
+#define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C4FFF8C
+
+#define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030
+#define GEN7_WA_L3_CHICKEN_MODE 0x20000000
+
+/* WaCatErrorRejectionIssue */
+#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030
+#define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11)
+
/* PCH */
/* south display engine interrupt */
@@ -3618,6 +3632,7 @@
#define GT_FIFO_NUM_RESERVED_ENTRIES 20
#define GEN6_UCGCTL2 0x9404
+# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13)
# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12)
# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 00fbff5..f425b23 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8184,8 +8184,8 @@
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
if (intel_enable_rc6(dev_priv->dev))
- rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
- GEN6_RC_CTL_RC6_ENABLE;
+ rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
+ (IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0;
I915_WRITE(GEN6_RC_CONTROL,
rc6_mask |
@@ -8463,12 +8463,32 @@
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
+ /* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
I915_WRITE(IVB_CHICKEN3,
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
+ /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+ GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+ /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+ I915_WRITE(GEN7_L3CNTLREG1,
+ GEN7_WA_FOR_GEN7_L3_CONTROL);
+ I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+ GEN7_WA_L3_CHICKEN_MODE);
+
+ /* This is required by WaCatErrorRejectionIssue */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
for_each_pipe(pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 9be353b..f58254a 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3223,6 +3223,7 @@
r = evergreen_startup(rdev);
if (r) {
DRM_ERROR("evergreen startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index db09065..2509c50 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1547,6 +1547,7 @@
r = cayman_startup(rdev);
if (r) {
DRM_ERROR("cayman startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
return r;
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index bfd36ab..333cde9 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -789,9 +789,7 @@
WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
@@ -3930,6 +3928,8 @@
int r100_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_disable(rdev);
@@ -3949,7 +3949,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r100_startup(rdev);
+ r = r100_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r100_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 3fc0d29..6829638 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -1431,6 +1431,8 @@
int r300_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
@@ -1452,7 +1454,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r300_startup(rdev);
+ r = r300_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r300_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 666e28f..b143230 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -291,6 +291,8 @@
int r420_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
@@ -316,7 +318,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r420_startup(rdev);
+ r = r420_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r420_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 4ae1615..25084e8 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -218,6 +218,8 @@
int r520_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
@@ -237,7 +239,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r520_startup(rdev);
+ r = r520_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r520_init(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 4f08e5e..fbcd848 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2529,6 +2529,7 @@
r = r600_startup(rdev);
if (r) {
DRM_ERROR("r600 startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 5082d17..1f53ae7 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2931,6 +2931,20 @@
bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP5;
}
}
+ if ((radeon_encoder->devices & ATOM_DEVICE_DFP6_SUPPORT) &&
+ (radeon_connector->devices & ATOM_DEVICE_DFP6_SUPPORT)) {
+ if (connected) {
+ DRM_DEBUG_KMS("DFP6 connected\n");
+ bios_0_scratch |= ATOM_S0_DFP6;
+ bios_3_scratch |= ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch |= ATOM_S6_ACC_REQ_DFP6;
+ } else {
+ DRM_DEBUG_KMS("DFP6 disconnected\n");
+ bios_0_scratch &= ~ATOM_S0_DFP6;
+ bios_3_scratch &= ~ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP6;
+ }
+ }
if (rdev->family >= CHIP_R600) {
WREG32(R600_BIOS_0_SCRATCH, bios_0_scratch);
@@ -2951,6 +2965,9 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t bios_3_scratch;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (rdev->family >= CHIP_R600)
bios_3_scratch = RREG32(R600_BIOS_3_SCRATCH);
else
@@ -3003,6 +3020,9 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t bios_2_scratch;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (rdev->family >= CHIP_R600)
bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH);
else
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 435a3d97..e64bec4 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -453,6 +453,10 @@
int r;
radeon_mutex_lock(&rdev->cs_mutex);
+ if (!rdev->accel_working) {
+ radeon_mutex_unlock(&rdev->cs_mutex);
+ return -EBUSY;
+ }
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 64ea3dd..4bd36a3 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -364,8 +364,10 @@
int not_processed = 0;
read_lock_irqsave(&rdev->fence_lock, irq_flags);
- if (!rdev->fence_drv[ring].initialized)
+ if (!rdev->fence_drv[ring].initialized) {
+ read_unlock_irqrestore(&rdev->fence_lock, irq_flags);
return 0;
+ }
if (!list_empty(&rdev->fence_drv[ring].emitted)) {
struct list_head *ptr;
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 30a4c50..92c9ea4 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -500,8 +500,11 @@
int radeon_debugfs_ring_init(struct radeon_device *rdev)
{
#if defined(CONFIG_DEBUG_FS)
- return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
- ARRAY_SIZE(radeon_debugfs_ring_info_list));
+ if (rdev->family >= CHIP_CAYMAN)
+ return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
+ ARRAY_SIZE(radeon_debugfs_ring_info_list));
+ else
+ return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, 1);
#else
return 0;
#endif
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index b0ce84a..866a05b 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -442,6 +442,8 @@
int rs400_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs400_gart_disable(rdev);
/* Resume clock before doing reset */
@@ -462,7 +464,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs400_startup(rdev);
+ r = rs400_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs400_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index ec46eb4..4fc7006 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -684,9 +684,7 @@
WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
@@ -878,6 +876,8 @@
int rs600_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs600_gart_disable(rdev);
/* Resume clock before doing reset */
@@ -896,7 +896,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs600_startup(rdev);
+ r = rs600_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs600_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 4f24a0f..f68dff2 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -659,6 +659,8 @@
int rs690_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs400_gart_disable(rdev);
/* Resume clock before doing reset */
@@ -677,7 +679,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs690_startup(rdev);
+ r = rs690_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs690_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 880637f..959bf44 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -424,6 +424,8 @@
int rv515_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
@@ -443,7 +445,11 @@
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rv515_startup(rdev);
+ r = rv515_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rv515_suspend(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index a1668b6..c049c0c 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -1139,6 +1139,7 @@
r = rv770_startup(rdev);
if (r) {
DRM_ERROR("r600 startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
index eedca3c..dd87ae9 100644
--- a/drivers/hwmon/ads1015.c
+++ b/drivers/hwmon/ads1015.c
@@ -271,7 +271,7 @@
continue;
err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
if (err)
- goto exit_free;
+ goto exit_remove;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
@@ -285,7 +285,6 @@
exit_remove:
for (k = 0; k < ADS1015_CHANNELS; ++k)
device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-exit_free:
kfree(data);
exit:
return err;
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index f609b57..6bab200 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -340,8 +340,6 @@
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
@@ -361,8 +359,6 @@
case 0: /* full speed */
fanmode |= (3 << FAN_CTRL_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (3 << FAN_CTRL_MODE(nr));
@@ -377,6 +373,9 @@
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
+ if (val == 0)
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
return 0;
}
diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
index e10a092..a6760ba 100644
--- a/drivers/hwmon/max6639.c
+++ b/drivers/hwmon/max6639.c
@@ -72,8 +72,8 @@
static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
-#define FAN_FROM_REG(val, div, rpm_range) ((val) == 0 ? -1 : \
- (val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val)))
+#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
+ 0 : (rpm_ranges[rpm_range] * 30) / (val))
#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) / 1000, 0, 255)
/*
@@ -333,7 +333,7 @@
return PTR_ERR(data);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
- data->ppr, data->rpm_range));
+ data->rpm_range));
}
static ssize_t show_alarm(struct device *dev,
@@ -429,9 +429,9 @@
struct max6639_data *data = i2c_get_clientdata(client);
struct max6639_platform_data *max6639_info =
client->dev.platform_data;
- int i = 0;
+ int i;
int rpm_range = 1; /* default: 4000 RPM */
- int err = 0;
+ int err;
/* Reset chip to default values, see below for GCONFIG setup */
err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
@@ -446,11 +446,6 @@
else
data->ppr = 2;
data->ppr -= 1;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_PPR(i),
- data->ppr << 5);
- if (err)
- goto exit;
if (max6639_info)
rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
@@ -458,6 +453,13 @@
for (i = 0; i < 2; i++) {
+ /* Set Fan pulse per revolution */
+ err = i2c_smbus_write_byte_data(client,
+ MAX6639_REG_FAN_PPR(i),
+ data->ppr << 6);
+ if (err)
+ goto exit;
+
/* Fans config PWM, RPM */
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_CONFIG1(i),
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index beaf5a8..9b97a5b 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -82,7 +82,7 @@
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_TEMPERATURE_PEAK,
- 0xffff);
+ 0x8000);
break;
default:
ret = -ENODATA;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 6381604..0ab4a95 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -755,7 +755,7 @@
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
- .remove = tegra_i2c_remove,
+ .remove = __devexit_p(tegra_i2c_remove),
#ifdef CONFIG_PM
.suspend = tegra_i2c_suspend,
.resume = tegra_i2c_resume,
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 7f879b2..af8d016 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -116,4 +116,3 @@
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
-obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
deleted file mode 100644
index 41d4155..0000000
--- a/drivers/ide/at91_ide.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
- * with Compact Flash True IDE logic
- *
- * Copyright (c) 2008, 2009 Kelvatek Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/ide.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <asm/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#define DRV_NAME "at91_ide"
-
-#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
-#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
-
-/*
- * Access to IDE device is possible through EBI Static Memory Controller
- * with Compact Flash logic. For details see EBI and SMC datasheet sections
- * of any microcontroller from AT91SAM9 family.
- *
- * Within SMC chip select address space, lines A[23:21] distinguish Compact
- * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
- * 0x00c0000 - True IDE
- * 0x00e0000 - Alternate True IDE (Alt Status Register)
- *
- * On True IDE mode Task File and Data Register are mapped at the same address.
- * To distinguish access between these two different bus data width is used:
- * 8Bit for Task File, 16Bit for Data I/O.
- *
- * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
- * only inside IDE callback routines which are serialized by IDE layer,
- * so no additional locking needed.
- */
-
-#define TASK_FILE 0x00c00000
-#define ALT_MODE 0x00e00000
-#define REGS_SIZE 8
-
-#define enter_16bit(cs, mode) do { \
- mode = at91_sys_read(AT91_SMC_MODE(cs)); \
- at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
-} while (0)
-
-#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
-
-static void set_smc_timings(const u8 chipselect, const u16 cycle,
- const u16 setup, const u16 pulse,
- const u16 data_float, int use_iordy)
-{
- unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_BAT_SELECT;
-
- /* disable or enable waiting for IORDY signal */
- if (use_iordy)
- mode |= AT91_SMC_EXNWMODE_READY;
-
- /* add data float cycles if needed */
- if (data_float)
- mode |= AT91_SMC_TDF_(data_float);
-
- at91_sys_write(AT91_SMC_MODE(chipselect), mode);
-
- /* setup timings in SMC */
- at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cycle) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_RDPULSE_(cycle));
- at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
-}
-
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
-{
- u64 tmp = ns;
-
- tmp *= mck_hz;
- tmp += 1000*1000*1000 - 1; /* round up */
- do_div(tmp, 1000*1000*1000);
- return (unsigned int) tmp;
-}
-
-static void apply_timings(const u8 chipselect, const u8 pio,
- const struct ide_timing *timing, int use_iordy)
-{
- unsigned int t0, t1, t2, t6z;
- unsigned int cycle, setup, pulse, data_float;
- unsigned int mck_hz;
- struct clk *mck;
-
- /* see table 22 of Compact Flash standard 4.1 for the meaning,
- * we do not stretch active (t2) time, so setup (t1) + hold time (th)
- * assure at least minimal recovery (t2i) time */
- t0 = timing->cyc8b;
- t1 = timing->setup;
- t2 = timing->act8b;
- t6z = (pio < 5) ? 30 : 20;
-
- pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
-
- mck = clk_get(NULL, "mck");
- BUG_ON(IS_ERR(mck));
- mck_hz = clk_get_rate(mck);
- pdbg("mck_hz=%u\n", mck_hz);
-
- cycle = calc_mck_cycles(t0, mck_hz);
- setup = calc_mck_cycles(t1, mck_hz);
- pulse = calc_mck_cycles(t2, mck_hz);
- data_float = calc_mck_cycles(t6z, mck_hz);
-
- pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
- cycle, setup, pulse, data_float);
-
- set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
-}
-
-static void at91_ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- len++;
-
- enter_16bit(chipselect, mode);
- readsw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- enter_16bit(chipselect, mode);
- writesw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct ide_timing *timing;
- u8 chipselect = hwif->select_data;
- int use_iordy = 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- pdbg("chipselect %u pio %u\n", chipselect, pio);
-
- timing = ide_timing_find_mode(XFER_PIO_0 + pio);
- BUG_ON(!timing);
-
- if (ide_pio_need_iordy(drive, pio))
- use_iordy = 1;
-
- apply_timings(chipselect, pio, timing, use_iordy);
-}
-
-static const struct ide_tp_ops at91_ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = at91_ide_input_data,
- .output_data = at91_ide_output_data,
-};
-
-static const struct ide_port_ops at91_ide_port_ops = {
- .set_pio_mode = at91_ide_set_pio_mode,
-};
-
-static const struct ide_port_info at91_ide_port_info __initdata = {
- .port_ops = &at91_ide_port_ops,
- .tp_ops = &at91_ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
- IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
- .pio_mask = ATA_PIO6,
- .chipset = ide_generic,
-};
-
-/*
- * If interrupt is delivered through GPIO, IRQ are triggered on falling
- * and rising edge of signal. Whereas IDE device request interrupt on high
- * level (rising edge in our case). This mean we have fake interrupts, so
- * we need to check interrupt pin and exit instantly from ISR when line
- * is on low level.
- */
-
-irqreturn_t at91_irq_handler(int irq, void *dev_id)
-{
- int ntries = 8;
- int pin_val1, pin_val2;
-
- /* additional deglitch, line can be noisy in badly designed PCB */
- do {
- pin_val1 = at91_get_gpio_value(irq);
- pin_val2 = at91_get_gpio_value(irq);
- } while (pin_val1 != pin_val2 && --ntries > 0);
-
- if (pin_val1 == 0 || ntries <= 0)
- return IRQ_HANDLED;
-
- return ide_intr(irq, dev_id);
-}
-
-static int __init at91_ide_probe(struct platform_device *pdev)
-{
- int ret;
- struct ide_hw hw, *hws[] = { &hw };
- struct ide_host *host;
- struct resource *res;
- unsigned long tf_base = 0, ctl_base = 0;
- struct at91_cf_data *board = pdev->dev.platform_data;
-
- if (!board)
- return -ENODEV;
-
- if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
- perr("no device detected\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- perr("can't get memory resource\n");
- return -ENODEV;
- }
-
- if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE, "ide") ||
- !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE, "alt")) {
- perr("memory resources in use\n");
- return -EBUSY;
- }
-
- pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
- board->irq_pin, (unsigned long) res->start);
-
- tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE);
- ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE);
- if (!tf_base || !ctl_base) {
- perr("can't map memory regions\n");
- return -EBUSY;
- }
-
- memset(&hw, 0, sizeof(hw));
-
- if (board->flags & AT91_IDE_SWAP_A0_A2) {
- /* workaround for stupid hardware bug */
- hw.io_ports.data_addr = tf_base + 0;
- hw.io_ports.error_addr = tf_base + 4;
- hw.io_ports.nsect_addr = tf_base + 2;
- hw.io_ports.lbal_addr = tf_base + 6;
- hw.io_ports.lbam_addr = tf_base + 1;
- hw.io_ports.lbah_addr = tf_base + 5;
- hw.io_ports.device_addr = tf_base + 3;
- hw.io_ports.command_addr = tf_base + 7;
- hw.io_ports.ctl_addr = ctl_base + 3;
- } else
- ide_std_init_ports(&hw, tf_base, ctl_base + 6);
-
- hw.irq = board->irq_pin;
- hw.dev = &pdev->dev;
-
- host = ide_host_alloc(&at91_ide_port_info, hws, 1);
- if (!host) {
- perr("failed to allocate ide host\n");
- return -ENOMEM;
- }
-
- /* setup Static Memory Controller - PIO 0 as default */
- apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
-
- /* with GPIO interrupt we have to do quirks in handler */
- if (gpio_is_valid(board->irq_pin))
- host->irq_handler = at91_irq_handler;
-
- host->ports[0]->select_data = board->chipselect;
-
- ret = ide_host_register(host, &at91_ide_port_info, hws);
- if (ret) {
- perr("failed to register ide host\n");
- goto err_free_host;
- }
- platform_set_drvdata(pdev, host);
- return 0;
-
-err_free_host:
- ide_host_free(host);
- return ret;
-}
-
-static int __exit at91_ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
-
- ide_host_remove(host);
- return 0;
-}
-
-static struct platform_driver at91_ide_driver = {
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
- .remove = __exit_p(at91_ide_remove),
-};
-
-static int __init at91_ide_init(void)
-{
- return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
-}
-
-static void __exit at91_ide_exit(void)
-{
- platform_driver_unregister(&at91_ide_driver);
-}
-
-module_init(at91_ide_init);
-module_exit(at91_ide_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
-
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index 75049e7..b026896 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -710,7 +710,7 @@
req = NULL;
spin_lock_irqsave(&state->lock, flags);
add_wait_queue(&state->wait_queue, &wait);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
for (;;) {
req = state->completed;
@@ -734,7 +734,7 @@
spin_lock_irqsave(&state->lock, flags);
}
- current->state = TASK_RUNNING;
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&state->wait_queue, &wait);
spin_unlock_irqrestore(&state->lock, flags);
diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig
index 86b2857..ea1e654 100644
--- a/drivers/media/radio/wl128x/Kconfig
+++ b/drivers/media/radio/wl128x/Kconfig
@@ -4,8 +4,8 @@
menu "Texas Instruments WL128x FM driver (ST based)"
config RADIO_WL128X
tristate "Texas Instruments WL128x FM Radio"
- depends on VIDEO_V4L2 && RFKILL
- select TI_ST if NET && GPIOLIB
+ depends on VIDEO_V4L2 && RFKILL && GPIOLIB
+ select TI_ST if NET
help
Choose Y here if you have this FM radio chip.
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 3aeb29a..7f26fdf 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -47,7 +47,7 @@
#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
#define MOD_NAME "imon"
-#define MOD_VERSION "0.9.3"
+#define MOD_VERSION "0.9.4"
#define DISPLAY_MINOR_BASE 144
#define DEVICE_NAME "lcd%d"
@@ -1658,9 +1658,17 @@
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx || !ictx->dev_present_intf0)
+ if (!ictx)
return;
+ /*
+ * if we get a callback before we're done configuring the hardware, we
+ * can't yet process the data, as there's nowhere to send it, but we
+ * still need to submit a new rx URB to avoid wedging the hardware
+ */
+ if (!ictx->dev_present_intf0)
+ goto out;
+
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
@@ -1678,6 +1686,7 @@
break;
}
+out:
usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
}
@@ -1690,9 +1699,17 @@
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx || !ictx->dev_present_intf1)
+ if (!ictx)
return;
+ /*
+ * if we get a callback before we're done configuring the hardware, we
+ * can't yet process the data, as there's nowhere to send it, but we
+ * still need to submit a new rx URB to avoid wedging the hardware
+ */
+ if (!ictx->dev_present_intf1)
+ goto out;
+
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
@@ -1710,6 +1727,7 @@
break;
}
+out:
usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
}
@@ -2242,7 +2260,7 @@
mutex_unlock(&ictx->lock);
usb_free_urb(rx_urb);
rx_urb_alloc_failed:
- dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+ dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret);
return NULL;
}
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index e5eb56a..6510110 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -154,10 +154,20 @@
}
#endif
- v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
- dev->usbc_buf[1], &dev->usbc_buf[2]);
+ dev->fw_ver = dev->usbc_buf[1];
- switch (dev->usbc_buf[1]) {
+ v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
+ dev->fw_ver, &dev->usbc_buf[2]);
+
+ if (dev->fw_ver > 0x15) {
+ dev->options.brightness = 0x80;
+ dev->options.contrast = 0x40;
+ dev->options.hue = 0xf;
+ dev->options.saturation = 0x40;
+ dev->options.sharpness = 0x80;
+ }
+
+ switch (dev->fw_ver) {
case HDPVR_FIRMWARE_VERSION:
dev->flags &= ~HDPVR_FLAG_AC3_CAP;
break;
@@ -169,7 +179,7 @@
default:
v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might"
" not work.\n");
- if (dev->usbc_buf[1] >= HDPVR_FIRMWARE_VERSION_AC3)
+ if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3)
dev->flags |= HDPVR_FLAG_AC3_CAP;
else
dev->flags &= ~HDPVR_FLAG_AC3_CAP;
@@ -270,6 +280,8 @@
.bitrate_mode = HDPVR_CONSTANT,
.gop_mode = HDPVR_SIMPLE_IDR_GOP,
.audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC,
+ /* original picture controls for firmware version <= 0x15 */
+ /* updated in device_authorization() for newer firmware */
.brightness = 0x86,
.contrast = 0x80,
.hue = 0x80,
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 087f7c0..11ffe9c 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -283,12 +283,13 @@
hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
+ dev->status = STATUS_STREAMING;
+
INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
queue_work(dev->workqueue, &dev->worker);
v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
"streaming started\n");
- dev->status = STATUS_STREAMING;
return 0;
}
@@ -722,21 +723,39 @@
};
static int fill_queryctrl(struct hdpvr_options *opt, struct v4l2_queryctrl *qc,
- int ac3)
+ int ac3, int fw_ver)
{
int err;
+ if (fw_ver > 0x15) {
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0x1e, 1, 0xf);
+ case V4L2_CID_SHARPNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ }
+ } else {
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_SHARPNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ }
+ }
+
switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
- case V4L2_CID_CONTRAST:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_SHARPNESS:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
case V4L2_CID_MPEG_AUDIO_ENCODING:
return v4l2_ctrl_query_fill(
qc, V4L2_MPEG_AUDIO_ENCODING_AAC,
@@ -794,7 +813,8 @@
if (qc->id == supported_v4l2_ctrls[i])
return fill_queryctrl(&dev->options, qc,
- dev->flags & HDPVR_FLAG_AC3_CAP);
+ dev->flags & HDPVR_FLAG_AC3_CAP,
+ dev->fw_ver);
if (qc->id < supported_v4l2_ctrls[i])
break;
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index d6439db..fea3c69 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -113,6 +113,7 @@
/* usb control transfer buffer and lock */
struct mutex usbc_mutex;
u8 *usbc_buf;
+ u8 fw_ver;
};
static inline struct hdpvr_device *to_hdpvr_dev(struct v4l2_device *v4l2_dev)
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index a74a797..eaabc27 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1407,7 +1407,7 @@
static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
{
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
- struct video_device *vdev = &ccdc->subdev.devnode;
+ struct video_device *vdev = ccdc->subdev.devnode;
struct v4l2_event event;
memset(&event, 0, sizeof(event));
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 0cad48a..c6a383d 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1694,6 +1694,7 @@
md->power_ro_lock.show = power_ro_lock_show;
md->power_ro_lock.store = power_ro_lock_store;
+ sysfs_attr_init(&md->power_ro_lock.attr);
md->power_ro_lock.attr.mode = mode;
md->power_ro_lock.attr.name =
"ro_lock_until_next_power_on";
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f545a3e..690255c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -290,8 +290,11 @@
static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
bool is_first_req)
{
- if (host->ops->pre_req)
+ if (host->ops->pre_req) {
+ mmc_host_clk_hold(host);
host->ops->pre_req(host, mrq, is_first_req);
+ mmc_host_clk_release(host);
+ }
}
/**
@@ -306,8 +309,11 @@
static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
int err)
{
- if (host->ops->post_req)
+ if (host->ops->post_req) {
+ mmc_host_clk_hold(host);
host->ops->post_req(host, mrq, err);
+ mmc_host_clk_release(host);
+ }
}
/**
@@ -620,7 +626,9 @@
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->enable(host);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err) {
@@ -640,7 +648,9 @@
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->disable(host, lazy);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err < 0) {
@@ -1121,6 +1131,10 @@
* might not allow this operation
*/
voltage = regulator_get_voltage(supply);
+
+ if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE)
+ min_uV = max_uV = voltage;
+
if (voltage < 0)
result = voltage;
else if (voltage < min_uV || voltage > max_uV)
@@ -1203,8 +1217,11 @@
host->ios.signal_voltage = signal_voltage;
- if (host->ops->start_signal_voltage_switch)
+ if (host->ops->start_signal_voltage_switch) {
+ mmc_host_clk_hold(host);
err = host->ops->start_signal_voltage_switch(host, &host->ios);
+ mmc_host_clk_release(host);
+ }
return err;
}
@@ -1239,6 +1256,7 @@
int err = 0;
card = host->card;
+ mmc_claim_host(host);
/*
* Send power notify command only if card
@@ -1269,6 +1287,7 @@
/* Set the card state to no notification after the poweroff */
card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
}
+ mmc_release_host(host);
}
/*
@@ -1327,12 +1346,28 @@
void mmc_power_off(struct mmc_host *host)
{
+ int err = 0;
mmc_host_clk_hold(host);
host->ios.clock = 0;
host->ios.vdd = 0;
- mmc_poweroff_notify(host);
+ /*
+ * For eMMC 4.5 device send AWAKE command before
+ * POWER_OFF_NOTIFY command, because in sleep state
+ * eMMC 4.5 devices respond to only RESET and AWAKE cmd
+ */
+ if (host->card && mmc_card_is_sleep(host->card) &&
+ host->bus_ops->resume) {
+ err = host->bus_ops->resume(host);
+
+ if (!err)
+ mmc_poweroff_notify(host);
+ else
+ pr_warning("%s: error %d during resume "
+ "(continue with poweroff sequence)\n",
+ mmc_hostname(host), err);
+ }
/*
* Reset ocr mask to be the highest possible voltage supported for
@@ -2386,12 +2421,6 @@
*/
if (mmc_try_claim_host(host)) {
if (host->bus_ops->suspend) {
- /*
- * For eMMC 4.5 device send notify command
- * before sleep, because in sleep state eMMC 4.5
- * devices respond to only RESET and AWAKE cmd
- */
- mmc_poweroff_notify(host);
err = host->bus_ops->suspend(host);
}
mmc_do_release_host(host);
diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
index fb8a5cd..08a7852 100644
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -14,27 +14,6 @@
int mmc_register_host_class(void);
void mmc_unregister_host_class(void);
-
-#ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_hold(struct mmc_host *host);
-void mmc_host_clk_release(struct mmc_host *host);
-unsigned int mmc_host_clk_rate(struct mmc_host *host);
-
-#else
-static inline void mmc_host_clk_hold(struct mmc_host *host)
-{
-}
-
-static inline void mmc_host_clk_release(struct mmc_host *host)
-{
-}
-
-static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
-{
- return host->ios.clock;
-}
-#endif
-
void mmc_host_deeper_disable(struct work_struct *work);
#endif
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 59b9ba5..a480663 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -376,7 +376,7 @@
}
card->ext_csd.raw_hc_erase_gap_size =
- ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.raw_sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.raw_sec_erase_mult =
@@ -551,7 +551,7 @@
goto out;
/* only compare read only fields */
- err = (!(card->ext_csd.raw_partition_support ==
+ err = !((card->ext_csd.raw_partition_support ==
bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
(card->ext_csd.raw_erased_mem_count ==
bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
@@ -1006,7 +1006,8 @@
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1, 0);
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
@@ -1116,7 +1117,7 @@
* Activate wide bus and DDR (if supported).
*/
if (!mmc_card_hs200(card) &&
- (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
+ (card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
static unsigned ext_csd_bits[][2] = {
{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
@@ -1315,11 +1316,13 @@
BUG_ON(!host->card);
mmc_claim_host(host);
- if (mmc_card_can_sleep(host))
+ if (mmc_card_can_sleep(host)) {
err = mmc_card_sleep(host);
- else if (!mmc_host_is_spi(host))
+ if (!err)
+ mmc_card_set_sleep(host->card);
+ } else if (!mmc_host_is_spi(host))
mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
return err;
@@ -1339,7 +1342,11 @@
BUG_ON(!host->card);
mmc_claim_host(host);
- err = mmc_init_card(host, host->ocr, host->card);
+ if (mmc_card_is_sleep(host->card)) {
+ err = mmc_card_awake(host);
+ mmc_card_clr_sleep(host->card);
+ } else
+ err = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
return err;
@@ -1349,7 +1356,8 @@
{
int ret;
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+ mmc_card_clr_sleep(host->card);
mmc_claim_host(host);
ret = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c63ad03..5017f93 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -451,9 +451,11 @@
* information and let the hardware specific code
* return what is possible given the options
*/
+ mmc_host_clk_hold(card->host);
drive_strength = card->host->ops->select_drive_strength(
card->sw_caps.uhs_max_dtr,
host_drv_type, card_drv_type);
+ mmc_host_clk_release(card->host);
err = mmc_sd_switch(card, 1, 2, drive_strength, status);
if (err)
@@ -660,9 +662,12 @@
goto out;
/* SPI mode doesn't define CMD19 */
- if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
+ if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) {
+ mmc_host_clk_hold(card->host);
err = card->host->ops->execute_tuning(card->host,
MMC_SEND_TUNING_BLOCK);
+ mmc_host_clk_release(card->host);
+ }
out:
kfree(status);
@@ -850,8 +855,11 @@
if (!reinit) {
int ro = -1;
- if (host->ops->get_ro)
+ if (host->ops->get_ro) {
+ mmc_host_clk_hold(card->host);
ro = host->ops->get_ro(host);
+ mmc_host_clk_release(card->host);
+ }
if (ro < 0) {
pr_warning("%s: host does not "
@@ -967,8 +975,11 @@
* Since initialization is now complete, enable preset
* value registers for UHS-I cards.
*/
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(card->host);
host->ops->enable_preset_value(host, true);
+ mmc_host_clk_release(card->host);
+ }
} else {
/*
* Attempt to change to high-speed (if supported)
@@ -1151,8 +1162,11 @@
return err;
/* Disable preset value enable if already set since last time */
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(host);
host->ops->enable_preset_value(host, false);
+ mmc_host_clk_release(host);
+ }
err = mmc_send_app_op_cond(host, 0, &ocr);
if (err)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index bd7bacc..12cde6e 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -98,10 +98,11 @@
return ret;
}
-static int sdio_read_cccr(struct mmc_card *card)
+static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
{
int ret;
int cccr_vsn;
+ int uhs = ocr & R4_18V_PRESENT;
unsigned char data;
unsigned char speed;
@@ -149,7 +150,7 @@
card->scr.sda_spec3 = 0;
card->sw_caps.sd3_bus_mode = 0;
card->sw_caps.sd3_drv_type = 0;
- if (cccr_vsn >= SDIO_CCCR_REV_3_00) {
+ if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
card->scr.sda_spec3 = 1;
ret = mmc_io_rw_direct(card, 0, 0,
SDIO_CCCR_UHS, 0, &data);
@@ -712,7 +713,7 @@
/*
* Read the common registers.
*/
- err = sdio_read_cccr(card);
+ err = sdio_read_cccr(card, ocr);
if (err)
goto remove;
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 68f81b9..f573e7f 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -146,15 +146,21 @@
}
set_current_state(TASK_INTERRUPTIBLE);
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 1);
+ mmc_host_clk_release(host);
+ }
if (!kthread_should_stop())
schedule_timeout(period);
set_current_state(TASK_RUNNING);
} while (!kthread_should_stop());
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 0);
+ mmc_host_clk_release(host);
+ }
pr_debug("%s: IRQ thread exiting with code %d\n",
mmc_hostname(host), ret);
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 947faa5..efdb81d 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -86,7 +86,6 @@
{
return ( cpu_is_at91sam9260()
|| cpu_is_at91sam9263()
- || cpu_is_at91cap9()
|| cpu_is_at91sam9rl()
|| cpu_is_at91sam9g10()
|| cpu_is_at91sam9g20()
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index fcfe1eb..6985cdb 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -969,11 +969,14 @@
host->data_status = 0;
if (host->need_reset) {
+ iflags = atmci_readl(host, ATMCI_IMR);
+ iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (host->caps.has_cfg_reg)
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_IER, iflags);
host->need_reset = false;
}
atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 0e34279..8bec1c3 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -22,7 +22,6 @@
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/scatterlist.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
@@ -502,8 +501,14 @@
host->dir_status = DW_MCI_SEND_STATUS;
if (dw_mci_submit_data_dma(host, data)) {
+ int flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->sg = data->sg;
- host->pio_offset = 0;
host->part_buf_start = 0;
host->part_buf_count = 0;
@@ -972,6 +977,7 @@
* generates a block interrupt, hence setting
* the scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
ctrl |= SDMMC_CTRL_FIFO_RESET;
@@ -1311,54 +1317,44 @@
static void dw_mci_read_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int remain, fcnt;
do {
- len = host->part_buf_count +
- (SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift);
- if (offset + len <= sg->length) {
- dw_mci_pull_data(host, (void *)(buf + offset), len);
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
+ << shift) + host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
+ dw_mci_pull_data(host, (void *)(buf + offset), len);
offset += len;
nbytes += len;
-
- if (offset == sg->length) {
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
- dw_mci_pull_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- dw_mci_pull_data(host, buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_DATA_ERROR, &host->pending_events);
@@ -1367,65 +1363,66 @@
return;
}
} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static void dw_mci_write_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int fifo_depth = host->fifo_depth;
+ unsigned int remain, fcnt;
do {
- len = ((host->fifo_depth -
- SDMMC_GET_FCNT(mci_readl(host, STATUS))) << shift)
- - host->part_buf_count;
- if (offset + len <= sg->length) {
- host->push_data(host, (void *)(buf + offset), len);
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = ((fifo_depth -
+ SDMMC_GET_FCNT(mci_readl(host, STATUS)))
+ << shift) - host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
+ host->push_data(host, (void *)(buf + offset), len);
offset += len;
nbytes += len;
- if (offset == sg->length) {
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
-
- host->push_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- host->push_data(host, (void *)buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
@@ -1435,12 +1432,20 @@
return;
}
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
@@ -1643,6 +1648,7 @@
* block interrupt, hence setting the
* scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0d955ff..304f2f9 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1325,7 +1325,7 @@
if (ret)
goto unmap;
- if (dev->irq[1] == NO_IRQ)
+ if (dev->irq[1] == NO_IRQ || !dev->irq[1])
host->singleirq = true;
else {
ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index ab66f24..1534b58 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -113,8 +113,8 @@
const int j = i * 2;
u32 mask;
- mask = mmc_vddrange_to_ocrmask(voltage_ranges[j],
- voltage_ranges[j + 1]);
+ mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]),
+ be32_to_cpu(voltage_ranges[j + 1]));
if (!mask) {
ret = -EINVAL;
dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index ff4adc0..5d876ff 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -38,6 +38,23 @@
int base = reg & ~0x3;
int shift = (reg & 0x3) * 8;
u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+ /*
+ * "DMA select" locates at offset 0x28 in SD specification, but on
+ * P5020 or P3041, it locates at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ dma_bits = in_be32(host->ioaddr + reg);
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+ /* fixup the result */
+ ret &= ~SDHCI_CTRL_DMA_MASK;
+ ret |= dma_bits;
+ }
+
return ret;
}
@@ -56,6 +73,21 @@
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
{
+ /*
+ * "DMA select" location is offset 0x28 in SD specification, but on
+ * P5020 or P3041, it's located at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+ clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+ dma_bits);
+ val &= ~SDHCI_CTRL_DMA_MASK;
+ val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+ }
+
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
if (reg == SDHCI_HOST_CONTROL)
val &= ~ESDHC_HOST_CONTROL_RES;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 7165e6a..6ebdc40 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -250,7 +250,7 @@
static int mfd_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD;
+ slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
return 0;
}
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 03970bc..c5c2a48 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -2,7 +2,7 @@
* sdhci-pltfm.c Support for SDHCI platform devices
* Copyright (c) 2009 Intel Corporation
*
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007, 2011 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
@@ -71,6 +71,14 @@
if (sdhci_of_wp_inverted(np))
host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+ if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+ of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+ of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
clk = of_get_property(np, "clock-frequency", &size);
if (clk && size == sizeof(*clk) && *clk)
pltfm_host->clock = be32_to_cpup(clk);
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index f5d8b53..352d479 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1327,7 +1327,7 @@
if (ret < 0)
goto clean_up2;
- mmc_add_host(mmc);
+ INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
@@ -1338,22 +1338,24 @@
}
ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:int", host);
if (ret) {
- free_irq(irq[0], host);
dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
- goto clean_up3;
+ goto clean_up4;
}
- INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
-
- mmc_detect_change(host->mmc, 0);
+ ret = mmc_add_host(mmc);
+ if (ret < 0)
+ goto clean_up5;
dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
dev_dbg(&pdev->dev, "chip ver H'%04x\n",
sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
return ret;
+clean_up5:
+ free_irq(irq[1], host);
+clean_up4:
+ free_irq(irq[0], host);
clean_up3:
- mmc_remove_host(mmc);
pm_runtime_suspend(&pdev->dev);
clean_up2:
pm_runtime_disable(&pdev->dev);
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index a95e6d9..f96c536 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -20,8 +20,8 @@
#include <linux/mmc/tmio.h>
#include <linux/mutex.h>
#include <linux/pagemap.h>
-#include <linux/spinlock.h>
#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
#define TMIO_SDIO_STAT_IOIRQ 0x0001
@@ -120,6 +120,7 @@
void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable);
void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata);
void tmio_mmc_release_dma(struct tmio_mmc_host *host);
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host);
#else
static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
struct mmc_data *data)
@@ -140,6 +141,10 @@
static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
{
}
+
+static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+}
#endif
#ifdef CONFIG_PM
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index 7a6e6cc..8253ec1 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -34,6 +34,18 @@
#endif
}
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+ tmio_mmc_enable_dma(host, false);
+
+ if (host->chan_rx)
+ dmaengine_terminate_all(host->chan_rx);
+ if (host->chan_tx)
+ dmaengine_terminate_all(host->chan_tx);
+
+ tmio_mmc_enable_dma(host, true);
+}
+
static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
{
struct scatterlist *sg = host->sg_ptr, *sg_tmp;
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index abad01b..5f9ad74 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -41,8 +41,8 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
#include <linux/spinlock.h>
+#include <linux/workqueue.h>
#include "tmio_mmc.h"
@@ -246,6 +246,7 @@
/* Ready for new calls */
host->mrq = NULL;
+ tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
}
@@ -272,6 +273,9 @@
host->mrq = NULL;
spin_unlock_irqrestore(&host->lock, flags);
+ if (mrq->cmd->error || (mrq->data && mrq->data->error))
+ tmio_mmc_abort_dma(host);
+
mmc_request_done(host->mmc, mrq);
}
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 8153a3e..f9b74c0 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -1842,7 +1842,7 @@
ok = 1;
}
- if (!netif_carrier_ok(dev))
+ if (dev->flags & IFF_SLAVE || !netif_carrier_ok(dev))
next_tick = 5*HZ;
if (vp->medialock)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 986019b..c7ca7ec 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -797,7 +797,7 @@
if (priv->has_phy) {
/* connect to PHY */
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
- priv->mac_id ? "1" : "0", priv->phy_id);
+ priv->mii_bus->id, priv->phy_id);
phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
PHY_INTERFACE_MODE_MII);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 1e3f978..2545213 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -117,10 +117,6 @@
module_param(dropless_fc, int, 0);
MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
-static int poll;
-module_param(poll, int, 0);
-MODULE_PARM_DESC(poll, " Use polling (for debug)");
-
static int mrrs = -1;
module_param(mrrs, int, 0);
MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
@@ -4834,20 +4830,11 @@
static void bnx2x_timer(unsigned long data)
{
- u8 cos;
struct bnx2x *bp = (struct bnx2x *) data;
if (!netif_running(bp->dev))
return;
- if (poll) {
- struct bnx2x_fastpath *fp = &bp->fp[0];
-
- for_each_cos_in_tx_queue(fp, cos)
- bnx2x_tx_int(bp, &fp->txdata[cos]);
- bnx2x_rx_int(fp, 1000);
- }
-
if (!BP_NOMCP(bp)) {
int mb_idx = BP_FW_MB_IDX(bp);
u32 drv_pulse;
@@ -10063,7 +10050,6 @@
static int __devinit bnx2x_init_bp(struct bnx2x *bp)
{
int func;
- int timer_interval;
int rc;
mutex_init(&bp->port.phy_mutex);
@@ -10139,8 +10125,7 @@
bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
- timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
- bp->current_interval = (poll ? poll : timer_interval);
+ bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ;
init_timer(&bp->timer);
bp->timer.expires = jiffies + bp->current_interval;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
index bc0121a..1adef26 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
@@ -1081,17 +1081,17 @@
estats->rx_stat_ifhcinbadoctets_lo);
ADD_64(fstats->total_bytes_received_hi,
- tfunc->rcv_error_bytes.hi,
+ le32_to_cpu(tfunc->rcv_error_bytes.hi),
fstats->total_bytes_received_lo,
- tfunc->rcv_error_bytes.lo);
+ le32_to_cpu(tfunc->rcv_error_bytes.lo));
memcpy(estats, &(fstats->total_bytes_received_hi),
sizeof(struct host_func_stats) - 2*sizeof(u32));
ADD_64(estats->error_bytes_received_hi,
- tfunc->rcv_error_bytes.hi,
+ le32_to_cpu(tfunc->rcv_error_bytes.hi),
estats->error_bytes_received_lo,
- tfunc->rcv_error_bytes.lo);
+ le32_to_cpu(tfunc->rcv_error_bytes.lo));
ADD_64(estats->etherstatsoverrsizepkts_hi,
estats->rx_stat_dot3statsframestoolong_hi,
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 1c7aad8..e92ef1b 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -986,7 +986,7 @@
printk(KERN_INFO
"%s: no PHY, assuming direct connection to switch\n",
ndev->name);
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE);
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
phy_id = 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 55d7bd4..8fa41f3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -815,8 +815,9 @@
int err;
int i;
- priv->eq_table.uar_map = kcalloc(sizeof *priv->eq_table.uar_map,
- mlx4_num_eq_uar(dev), GFP_KERNEL);
+ priv->eq_table.uar_map = kcalloc(mlx4_num_eq_uar(dev),
+ sizeof *priv->eq_table.uar_map,
+ GFP_KERNEL);
if (!priv->eq_table.uar_map) {
err = -ENOMEM;
goto err_out_free;
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 8a21e10..9ea7cab 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -685,7 +685,7 @@
return err;
}
-static int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
+int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
{
struct mlx4_cmd_mailbox *outbox = ptr;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mr.c b/drivers/net/ethernet/mellanox/mlx4/mr.c
index 8deeef9..25a80d7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx4/mr.c
@@ -304,7 +304,7 @@
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED);
}
-static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
+int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
u32 *base_mridx)
{
struct mlx4_priv *priv = mlx4_priv(dev);
@@ -320,14 +320,14 @@
}
EXPORT_SYMBOL_GPL(mlx4_mr_reserve_range);
-static void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
+void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
{
struct mlx4_priv *priv = mlx4_priv(dev);
mlx4_bitmap_free_range(&priv->mr_table.mpt_bitmap, base_mridx, cnt);
}
EXPORT_SYMBOL_GPL(mlx4_mr_release_range);
-static int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
+int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
u64 iova, u64 size, u32 access, int npages,
int page_shift, struct mlx4_mr *mr)
{
@@ -457,7 +457,7 @@
}
EXPORT_SYMBOL_GPL(mlx4_mr_alloc);
-static void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
+void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
{
int err;
@@ -852,7 +852,7 @@
}
EXPORT_SYMBOL_GPL(mlx4_fmr_alloc);
-static int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
+int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
u32 pd, u32 access, int max_pages,
int max_maps, u8 page_shift, struct mlx4_fmr *fmr)
{
@@ -954,7 +954,7 @@
}
EXPORT_SYMBOL_GPL(mlx4_fmr_free);
-static int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
+int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
{
if (fmr->maps)
return -EBUSY;
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index dcd819b..bfdb7af 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -73,6 +73,7 @@
struct list_head list;
u8 gid[16];
enum mlx4_protocol prot;
+ enum mlx4_steer_type steer;
};
enum res_qp_states {
@@ -374,6 +375,7 @@
ret->com.res_id = id;
ret->com.state = RES_QP_RESERVED;
+ ret->local_qpn = id;
INIT_LIST_HEAD(&ret->mcg_list);
spin_lock_init(&ret->mcg_spl);
@@ -2479,7 +2481,8 @@
}
static int add_mcg_res(struct mlx4_dev *dev, int slave, struct res_qp *rqp,
- u8 *gid, enum mlx4_protocol prot)
+ u8 *gid, enum mlx4_protocol prot,
+ enum mlx4_steer_type steer)
{
struct res_gid *res;
int err;
@@ -2495,6 +2498,7 @@
} else {
memcpy(res->gid, gid, 16);
res->prot = prot;
+ res->steer = steer;
list_add_tail(&res->list, &rqp->mcg_list);
err = 0;
}
@@ -2504,14 +2508,15 @@
}
static int rem_mcg_res(struct mlx4_dev *dev, int slave, struct res_qp *rqp,
- u8 *gid, enum mlx4_protocol prot)
+ u8 *gid, enum mlx4_protocol prot,
+ enum mlx4_steer_type steer)
{
struct res_gid *res;
int err;
spin_lock_irq(&rqp->mcg_spl);
res = find_gid(dev, slave, rqp, gid);
- if (!res || res->prot != prot)
+ if (!res || res->prot != prot || res->steer != steer)
err = -EINVAL;
else {
list_del(&res->list);
@@ -2538,7 +2543,7 @@
int attach = vhcr->op_modifier;
int block_loopback = vhcr->in_modifier >> 31;
u8 steer_type_mask = 2;
- enum mlx4_steer_type type = gid[7] & steer_type_mask;
+ enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1;
qpn = vhcr->in_modifier & 0xffffff;
err = get_res(dev, slave, qpn, RES_QP, &rqp);
@@ -2547,7 +2552,7 @@
qp.qpn = qpn;
if (attach) {
- err = add_mcg_res(dev, slave, rqp, gid, prot);
+ err = add_mcg_res(dev, slave, rqp, gid, prot, type);
if (err)
goto ex_put;
@@ -2556,7 +2561,7 @@
if (err)
goto ex_rem;
} else {
- err = rem_mcg_res(dev, slave, rqp, gid, prot);
+ err = rem_mcg_res(dev, slave, rqp, gid, prot, type);
if (err)
goto ex_put;
err = mlx4_qp_detach_common(dev, &qp, gid, prot, type);
@@ -2567,7 +2572,7 @@
ex_rem:
/* ignore error return below, already in error */
- err1 = rem_mcg_res(dev, slave, rqp, gid, prot);
+ err1 = rem_mcg_res(dev, slave, rqp, gid, prot, type);
ex_put:
put_res(dev, slave, qpn, RES_QP);
@@ -2606,7 +2611,7 @@
list_for_each_entry_safe(rgid, tmp, &rqp->mcg_list, list) {
qp.qpn = rqp->local_qpn;
err = mlx4_qp_detach_common(dev, &qp, rgid->gid, rgid->prot,
- MLX4_MC_STEER);
+ rgid->steer);
list_del(&rgid->list);
kfree(rgid);
}
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 6b35e7d..0c3e400 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -583,7 +583,7 @@
ks8851_dbg_dumpkkt(ks, rxpkt);
skb->protocol = eth_type_trans(skb, ks->netdev);
- netif_rx(skb);
+ netif_rx_ni(skb);
ks->netdev->stats.rx_packets++;
ks->netdev->stats.rx_bytes += rxlen;
diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index e58e78e..231176f 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -394,7 +394,6 @@
* @msg_enable : The message flags controlling driver output (see ethtool).
* @frame_cnt : number of frames received.
* @bus_width : i/o bus width.
- * @irq : irq number assigned to this device.
* @rc_rxqcr : Cached copy of KS_RXQCR.
* @rc_txcr : Cached copy of KS_TXCR.
* @rc_ier : Cached copy of KS_IER.
@@ -441,7 +440,6 @@
u32 msg_enable;
u32 frame_cnt;
int bus_width;
- int irq;
u16 rc_rxqcr;
u16 rc_txcr;
@@ -907,10 +905,10 @@
netif_dbg(ks, ifup, ks->netdev, "%s - entry\n", __func__);
/* reset the HW */
- err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
+ err = request_irq(netdev->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
if (err) {
- pr_err("Failed to request IRQ: %d: %d\n", ks->irq, err);
+ pr_err("Failed to request IRQ: %d: %d\n", netdev->irq, err);
return err;
}
@@ -955,7 +953,7 @@
/* set powermode to soft power down to save power */
ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
- free_irq(ks->irq, netdev);
+ free_irq(netdev->irq, netdev);
mutex_unlock(&ks->lock);
return 0;
}
@@ -1545,10 +1543,10 @@
if (!ks->hw_addr_cmd)
goto err_ioremap1;
- ks->irq = platform_get_irq(pdev, 0);
+ netdev->irq = platform_get_irq(pdev, 0);
- if (ks->irq < 0) {
- err = ks->irq;
+ if (netdev->irq < 0) {
+ err = netdev->irq;
goto err_get_irq;
}
diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c
index 212f43b..cd827ff 100644
--- a/drivers/net/ethernet/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/octeon/octeon_mgmt.c
@@ -670,7 +670,7 @@
static int octeon_mgmt_init_phy(struct net_device *netdev)
{
struct octeon_mgmt *p = netdev_priv(netdev);
- char phy_id[20];
+ char phy_id[MII_BUS_ID_SIZE + 3];
if (octeon_is_simulation()) {
/* No PHYs in the simulator. */
@@ -678,7 +678,7 @@
return 0;
}
- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", p->port);
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "mdio-octeon-0", p->port);
p->phydev = phy_connect(netdev, phy_id, octeon_mgmt_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index d0b814e..0319d64 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -67,6 +67,7 @@
unsigned long ipc_csum_error;
unsigned long rx_collision;
unsigned long rx_crc;
+ unsigned long dribbling_bit;
unsigned long rx_length;
unsigned long rx_mii;
unsigned long rx_multicast;
diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index d879763..ad1b627 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -201,7 +201,7 @@
if (unlikely(p->des01.erx.dribbling)) {
CHIP_DBG(KERN_ERR "GMAC RX: dribbling error\n");
- ret = discard_frame;
+ x->dribbling_bit++;
}
if (unlikely(p->des01.erx.sa_filter_fail)) {
CHIP_DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index fda5d2b..25953bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -104,7 +104,7 @@
ret = discard_frame;
}
if (unlikely(p->des01.rx.dribbling))
- ret = discard_frame;
+ x->dribbling_bit++;
if (unlikely(p->des01.rx.length_error)) {
x->rx_length++;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 1207400..b4b095f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -21,7 +21,7 @@
*******************************************************************************/
#define STMMAC_RESOURCE_NAME "stmmaceth"
-#define DRV_MODULE_VERSION "Dec_2011"
+#define DRV_MODULE_VERSION "Feb_2012"
#include <linux/stmmac.h>
#include <linux/phy.h>
#include "common.h"
@@ -97,4 +97,5 @@
int stmmac_suspend(struct net_device *ndev);
int stmmac_dvr_remove(struct net_device *ndev);
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat);
+ struct plat_stmmacenet_data *plat_dat,
+ void __iomem *addr);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 9573303..f98e151 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -47,23 +47,25 @@
offsetof(struct stmmac_priv, xstats.m)}
static const struct stmmac_stats stmmac_gstrings_stats[] = {
+ /* Transmit errors */
STMMAC_STAT(tx_underflow),
STMMAC_STAT(tx_carrier),
STMMAC_STAT(tx_losscarrier),
STMMAC_STAT(vlan_tag),
STMMAC_STAT(tx_deferred),
STMMAC_STAT(tx_vlan),
- STMMAC_STAT(rx_vlan),
STMMAC_STAT(tx_jabber),
STMMAC_STAT(tx_frame_flushed),
STMMAC_STAT(tx_payload_error),
STMMAC_STAT(tx_ip_header_error),
+ /* Receive errors */
STMMAC_STAT(rx_desc),
STMMAC_STAT(sa_filter_fail),
STMMAC_STAT(overflow_error),
STMMAC_STAT(ipc_csum_error),
STMMAC_STAT(rx_collision),
STMMAC_STAT(rx_crc),
+ STMMAC_STAT(dribbling_bit),
STMMAC_STAT(rx_length),
STMMAC_STAT(rx_mii),
STMMAC_STAT(rx_multicast),
@@ -73,6 +75,8 @@
STMMAC_STAT(sa_rx_filter_fail),
STMMAC_STAT(rx_missed_cntr),
STMMAC_STAT(rx_overflow_cntr),
+ STMMAC_STAT(rx_vlan),
+ /* Tx/Rx IRQ errors */
STMMAC_STAT(tx_undeflow_irq),
STMMAC_STAT(tx_process_stopped_irq),
STMMAC_STAT(tx_jabber_irq),
@@ -82,6 +86,7 @@
STMMAC_STAT(rx_watchdog_irq),
STMMAC_STAT(tx_early_irq),
STMMAC_STAT(fatal_bus_error_irq),
+ /* Extra info */
STMMAC_STAT(threshold),
STMMAC_STAT(tx_pkt_n),
STMMAC_STAT(rx_pkt_n),
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 96fa2da..6ee593a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -241,7 +241,7 @@
case 1000:
if (likely(priv->plat->has_gmac))
ctrl &= ~priv->hw->link.port;
- stmmac_hw_fix_mac_speed(priv);
+ stmmac_hw_fix_mac_speed(priv);
break;
case 100:
case 10:
@@ -785,7 +785,7 @@
u32 uid = ((hwid & 0x0000ff00) >> 8);
u32 synid = (hwid & 0x000000ff);
- pr_info("STMMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+ pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
uid, synid);
return synid;
@@ -869,38 +869,6 @@
return hw_cap;
}
-/**
- * stmmac_mac_device_setup
- * @dev : device pointer
- * Description: this is to attach the GMAC or MAC 10/100
- * main core structures that will be completed during the
- * open step.
- */
-static int stmmac_mac_device_setup(struct net_device *dev)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
-
- struct mac_device_info *device;
-
- if (priv->plat->has_gmac)
- device = dwmac1000_setup(priv->ioaddr);
- else
- device = dwmac100_setup(priv->ioaddr);
-
- if (!device)
- return -ENOMEM;
-
- priv->hw = device;
- priv->hw->ring = &ring_mode_ops;
-
- if (device_can_wakeup(priv->device)) {
- priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */
- enable_irq_wake(priv->wol_irq);
- }
-
- return 0;
-}
-
static void stmmac_check_ether_addr(struct stmmac_priv *priv)
{
/* verify if the MAC address is valid, in case of failures it
@@ -930,20 +898,8 @@
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
- /* MAC HW device setup */
- ret = stmmac_mac_device_setup(dev);
- if (ret < 0)
- return ret;
-
stmmac_check_ether_addr(priv);
- stmmac_verify_args();
-
- /* Override with kernel parameters if supplied XXX CRS XXX
- * this needs to have multiple instances */
- if ((phyaddr >= 0) && (phyaddr <= 31))
- priv->plat->phy_addr = phyaddr;
-
/* MDIO bus Registration */
ret = stmmac_mdio_register(dev);
if (ret < 0) {
@@ -976,44 +932,6 @@
goto open_error;
}
- stmmac_get_synopsys_id(priv);
-
- priv->hw_cap_support = stmmac_get_hw_features(priv);
-
- if (priv->hw_cap_support) {
- pr_info(" Support DMA HW capability register");
-
- /* We can override some gmac/dma configuration fields: e.g.
- * enh_desc, tx_coe (e.g. that are passed through the
- * platform) with the values from the HW capability
- * register (if supported).
- */
- priv->plat->enh_desc = priv->dma_cap.enh_desc;
- priv->plat->tx_coe = priv->dma_cap.tx_coe;
- priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
-
- /* By default disable wol on magic frame if not supported */
- if (!priv->dma_cap.pmt_magic_frame)
- priv->wolopts &= ~WAKE_MAGIC;
-
- } else
- pr_info(" No HW DMA feature register supported");
-
- /* Select the enhnaced/normal descriptor structures */
- stmmac_selec_desc_mode(priv);
-
- /* PMT module is not integrated in all the MAC devices. */
- if (priv->plat->pmt) {
- pr_info(" Remote wake-up capable\n");
- device_set_wakeup_capable(priv->device, 1);
- }
-
- priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
- if (priv->rx_coe)
- pr_info(" Checksum Offload Engine supported\n");
- if (priv->plat->tx_coe)
- pr_info(" Checksum insertion supported\n");
-
/* Create and initialize the TX/RX descriptors chains. */
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
@@ -1030,14 +948,14 @@
/* Copy the MAC addr into the HW */
priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
/* If required, perform hw setup of the bus. */
if (priv->plat->bus_setup)
priv->plat->bus_setup(priv->ioaddr);
+
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
- netdev_update_features(dev);
-
/* Request the IRQ lines */
ret = request_irq(dev->irq, stmmac_interrupt,
IRQF_SHARED, dev->name, dev);
@@ -1047,6 +965,17 @@
goto open_error;
}
+ /* Request the Wake IRQ in case of another line is used for WoL */
+ if (priv->wol_irq != dev->irq) {
+ ret = request_irq(priv->wol_irq, stmmac_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the ext WoL IRQ %d "
+ "(error: %d)\n", __func__, priv->wol_irq, ret);
+ goto open_error_wolirq;
+ }
+ }
+
/* Enable the MAC Rx/Tx */
stmmac_set_mac(priv->ioaddr, true);
@@ -1062,7 +991,7 @@
#ifdef CONFIG_STMMAC_DEBUG_FS
ret = stmmac_init_fs(dev);
if (ret < 0)
- pr_warning("\tFailed debugFS registration");
+ pr_warning("%s: failed debugFS registration\n", __func__);
#endif
/* Start the ball rolling... */
DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
@@ -1072,6 +1001,7 @@
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_start(tmrate);
#endif
+
/* Dump DMA/MAC registers */
if (netif_msg_hw(priv)) {
priv->hw->mac->dump_regs(priv->ioaddr);
@@ -1087,6 +1017,9 @@
return 0;
+open_error_wolirq:
+ free_irq(dev->irq, dev);
+
open_error:
#ifdef CONFIG_STMMAC_TIMER
kfree(priv->tm);
@@ -1127,6 +1060,8 @@
/* Free the IRQ lines */
free_irq(dev->irq, dev);
+ if (priv->wol_irq != dev->irq)
+ free_irq(priv->wol_irq, dev);
/* Stop TX/RX DMA and clear the descriptors */
priv->hw->dma->stop_tx(priv->ioaddr);
@@ -1789,13 +1724,77 @@
};
/**
+ * stmmac_hw_init - Init the MAC device
+ * @priv : pointer to the private device structure.
+ * Description: this function detects which MAC device
+ * (GMAC/MAC10-100) has to attached, checks the HW capability
+ * (if supported) and sets the driver's features (for example
+ * to use the ring or chaine mode or support the normal/enh
+ * descriptor structure).
+ */
+static int stmmac_hw_init(struct stmmac_priv *priv)
+{
+ int ret = 0;
+ struct mac_device_info *mac;
+
+ /* Identify the MAC HW device */
+ if (priv->plat->has_gmac)
+ mac = dwmac1000_setup(priv->ioaddr);
+ else
+ mac = dwmac100_setup(priv->ioaddr);
+ if (!mac)
+ return -ENOMEM;
+
+ priv->hw = mac;
+
+ /* To use the chained or ring mode */
+ priv->hw->ring = &ring_mode_ops;
+
+ /* Get and dump the chip ID */
+ stmmac_get_synopsys_id(priv);
+
+ /* Get the HW capability (new GMAC newer than 3.50a) */
+ priv->hw_cap_support = stmmac_get_hw_features(priv);
+ if (priv->hw_cap_support) {
+ pr_info(" DMA HW capability register supported");
+
+ /* We can override some gmac/dma configuration fields: e.g.
+ * enh_desc, tx_coe (e.g. that are passed through the
+ * platform) with the values from the HW capability
+ * register (if supported).
+ */
+ priv->plat->enh_desc = priv->dma_cap.enh_desc;
+ priv->plat->tx_coe = priv->dma_cap.tx_coe;
+ priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+ } else
+ pr_info(" No HW DMA feature register supported");
+
+ /* Select the enhnaced/normal descriptor structures */
+ stmmac_selec_desc_mode(priv);
+
+ priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+ if (priv->rx_coe)
+ pr_info(" RX Checksum Offload Engine supported\n");
+ if (priv->plat->tx_coe)
+ pr_info(" TX Checksum insertion supported\n");
+
+ if (priv->plat->pmt) {
+ pr_info(" Wake-Up On Lan supported\n");
+ device_set_wakeup_capable(priv->device, 1);
+ }
+
+ return ret;
+}
+
+/**
* stmmac_dvr_probe
* @device: device pointer
* Description: this is the main probe function used to
* call the alloc_etherdev, allocate the priv structure.
*/
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat)
+ struct plat_stmmacenet_data *plat_dat,
+ void __iomem *addr)
{
int ret = 0;
struct net_device *ndev = NULL;
@@ -1815,10 +1814,27 @@
ether_setup(ndev);
- ndev->netdev_ops = &stmmac_netdev_ops;
stmmac_set_ethtool_ops(ndev);
+ priv->pause = pause;
+ priv->plat = plat_dat;
+ priv->ioaddr = addr;
+ priv->dev->base_addr = (unsigned long)addr;
- ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ /* Verify driver arguments */
+ stmmac_verify_args();
+
+ /* Override with kernel parameters if supplied XXX CRS XXX
+ * this needs to have multiple instances */
+ if ((phyaddr >= 0) && (phyaddr <= 31))
+ priv->plat->phy_addr = phyaddr;
+
+ /* Init MAC and get the capabilities */
+ stmmac_hw_init(priv);
+
+ ndev->netdev_ops = &stmmac_netdev_ops;
+
+ ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM;
ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
#ifdef STMMAC_VLAN_TAG_USED
@@ -1830,8 +1846,6 @@
if (flow_ctrl)
priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
- priv->pause = pause;
- priv->plat = plat_dat;
netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
spin_lock_init(&priv->lock);
@@ -1839,15 +1853,10 @@
ret = register_netdev(ndev);
if (ret) {
- pr_err("%s: ERROR %i registering the device\n",
- __func__, ret);
+ pr_err("%s: ERROR %i registering the device\n", __func__, ret);
goto error;
}
- DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
- ndev->name, (ndev->features & NETIF_F_SG) ? "on" : "off",
- (ndev->features & NETIF_F_IP_CSUM) ? "on" : "off");
-
return priv;
error:
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index c796de9..50ad5b8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -96,13 +96,11 @@
stmmac_default_data();
- priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat);
+ priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr);
if (!priv) {
- pr_err("%s: main drivr probe failed", __func__);
+ pr_err("%s: main driver probe failed", __func__);
goto err_out;
}
- priv->ioaddr = addr;
- priv->dev->base_addr = (unsigned long)addr;
priv->dev->irq = pdev->irq;
priv->wol_irq = pdev->irq;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 1ac8324..3aad981 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -59,15 +59,19 @@
goto out_release_region;
}
plat_dat = pdev->dev.platform_data;
- priv = stmmac_dvr_probe(&(pdev->dev), plat_dat);
- if (!priv) {
- pr_err("%s: main drivr probe failed", __func__);
- goto out_unmap;
+
+ /* Custom initialisation (if needed)*/
+ if (plat_dat->init) {
+ ret = plat_dat->init(pdev);
+ if (unlikely(ret))
+ goto out_unmap;
}
- priv->ioaddr = addr;
- /* Set the I/O base addr */
- priv->dev->base_addr = (unsigned long)addr;
+ priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
+ if (!priv) {
+ pr_err("%s: main driver probe failed", __func__);
+ goto out_unmap;
+ }
/* Get the MAC information */
priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
@@ -92,13 +96,6 @@
platform_set_drvdata(pdev, priv->dev);
- /* Custom initialisation */
- if (priv->plat->init) {
- ret = priv->plat->init(pdev);
- if (unlikely(ret))
- goto out_unmap;
- }
-
pr_debug("STMMAC platform driver registration completed");
return 0;
diff --git a/drivers/net/ethernet/ti/cpmac.c b/drivers/net/ethernet/ti/cpmac.c
index 4d9a28f..cbc8df7 100644
--- a/drivers/net/ethernet/ti/cpmac.c
+++ b/drivers/net/ethernet/ti/cpmac.c
@@ -1122,7 +1122,7 @@
pdata = pdev->dev.platform_data;
if (external_switch || dumb_switch) {
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
} else {
for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
@@ -1138,7 +1138,7 @@
if (phy_id == PHY_MAX_ADDR) {
dev_err(&pdev->dev, "no PHY present, falling back "
"to switch on MDIO bus 0\n");
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
}
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 72a854f..41a8b5a 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1416,7 +1416,8 @@
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
udelay(50);
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+ mdio_bus->id, plat->phy);
port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(port->phydev)) {
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index e84662d..dd78c4c 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -60,6 +60,7 @@
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
+#define USB_PRODUCT_IPHONE_4S 0x12a0
#define IPHETH_USBINTF_CLASS 255
#define IPHETH_USBINTF_SUBCLASS 253
@@ -103,6 +104,10 @@
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ }
};
MODULE_DEVICE_TABLE(usb, ipheth_table);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 49f4667..4a34028 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -422,7 +422,9 @@
unregister_netdevice_queue(peer, head);
}
-static const struct nla_policy veth_policy[VETH_INFO_MAX + 1];
+static const struct nla_policy veth_policy[VETH_INFO_MAX + 1] = {
+ [VETH_INFO_PEER] = { .len = sizeof(struct ifinfomsg) },
+};
static struct rtnl_link_ops veth_link_ops = {
.kind = DRV_NAME,
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 39e0907..9245d88 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1501,7 +1501,7 @@
return err;
}
- return 1;
+ return 0;
}
static int rtl_pci_start(struct ieee80211_hw *hw)
@@ -1870,7 +1870,7 @@
}
/* Init PCI sw */
- err = !rtl_pci_init(hw, pdev);
+ err = rtl_pci_init(hw, pdev);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Failed to init PCI.\n"));
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 20fbebd..343ad29 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -253,7 +253,7 @@
if (!of_device_is_available(node))
return NULL;
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ dev = amba_device_alloc(NULL, 0, 0);
if (!dev)
return NULL;
@@ -283,14 +283,14 @@
if (ret)
goto err_free;
- ret = amba_device_register(dev, &iomem_resource);
+ ret = amba_device_add(dev, &iomem_resource);
if (ret)
goto err_free;
return dev;
err_free:
- kfree(dev);
+ amba_device_put(dev);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 0321fa3..0dab5ec 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -347,8 +347,6 @@
return rc;
}
- pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
-
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
@@ -466,6 +464,7 @@
return -EIO;
pgsz &= ~(pgsz - 1);
+ pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 7cc9e2f..71eac9c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -651,6 +651,11 @@
dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
secondary, subordinate, pass);
+ if (!primary && (primary != bus->number) && secondary && subordinate) {
+ dev_warn(&dev->dev, "Primary bus is hard wired to 0\n");
+ primary = bus->number;
+ }
+
/* Check if setup is sensible at all */
if (!pass &&
(primary != bus->number || secondary <= bus->number)) {
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 6def362..ef8b18c 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -77,6 +77,7 @@
}
EXPORT_SYMBOL(pci_remove_bus);
+static void __pci_remove_behind_bridge(struct pci_dev *dev);
/**
* pci_remove_bus_device - remove a PCI device and any children
* @dev: the device to remove
@@ -94,7 +95,7 @@
if (dev->subordinate) {
struct pci_bus *b = dev->subordinate;
- pci_remove_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
pci_remove_bus(b);
dev->subordinate = NULL;
}
@@ -107,6 +108,24 @@
__pci_remove_bus_device(dev);
}
+static void __pci_remove_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ __pci_remove_bus_device(pci_dev_b(l));
+}
+
+static void pci_stop_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ pci_stop_bus_device(pci_dev_b(l));
+}
+
/**
* pci_remove_behind_bridge - remove all devices behind a PCI bridge
* @dev: PCI bridge device
@@ -117,11 +136,8 @@
*/
void pci_remove_behind_bridge(struct pci_dev *dev)
{
- struct list_head *l, *n;
-
- if (dev->subordinate)
- list_for_each_safe(l, n, &dev->subordinate->devices)
- __pci_remove_bus_device(pci_dev_b(l));
+ pci_stop_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
}
static void pci_stop_bus_devices(struct pci_bus *bus)
diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index 7cf3d2f..1620088 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -189,7 +189,7 @@
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "read dev=%04x:%02x:%02x.%01x - offset %x size %d\n",
+ "read dev=%04x:%02x:%02x.%d - offset %x size %d\n",
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where, size);
@@ -228,7 +228,7 @@
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "write dev=%04x:%02x:%02x.%01x - "
+ "write dev=%04x:%02x:%02x.%d - "
"offset %x size %d val %x\n",
pci_domain_nr(bus), bus->number,
PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
@@ -432,7 +432,7 @@
d = pci_scan_single_device(b, devfn);
if (d)
dev_info(&pdev->xdev->dev, "New device on "
- "%04x:%02x:%02x.%02x found.\n", domain, bus,
+ "%04x:%02x:%02x.%d found.\n", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
}
@@ -1041,7 +1041,7 @@
pci_dev = pci_get_slot(pci_bus, PCI_DEVFN(slot, func));
if (!pci_dev) {
dev_dbg(&pdev->xdev->dev,
- "Cannot get PCI device %04x:%02x:%02x.%02x\n",
+ "Cannot get PCI device %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
continue;
}
@@ -1049,7 +1049,7 @@
pci_dev_put(pci_dev);
dev_dbg(&pdev->xdev->dev,
- "PCI device %04x:%02x:%02x.%02x removed.\n",
+ "PCI device %04x:%02x:%02x.%d removed.\n",
domain, bus, slot, func);
}
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 4902206..1dd68f5 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -26,6 +26,7 @@
#include <mach/board.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
/*
@@ -156,7 +157,7 @@
/*
* Use 16 bit accesses unless/until we need 8-bit i/o space.
*/
- csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW;
+ csr = at91_ramc_read(0, AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW;
/*
* NOTE: this CF controller ignores IOIS16, so we can't really do
@@ -175,7 +176,7 @@
csr |= AT91_SMC_DBW_16;
pr_debug("%s: 16bit i/o bus\n", driver_name);
}
- at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr);
+ at91_ramc_write(0, AT91_SMC_CSR(cf->board->chipselect), csr);
io->start = cf->socket.io_offset;
io->stop = io->start + SZ_2K - 1;
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 8fe15cf..894cd5e 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -189,7 +189,7 @@
pindesc->pctldev = pctldev;
/* Copy basic pin info */
- if (pindesc->name) {
+ if (name) {
pindesc->name = name;
} else {
pindesc->name = kasprintf(GFP_KERNEL, "PIN%u", number);
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index 42a7d60..7481146 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -33,6 +33,8 @@
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
@@ -83,19 +85,6 @@
static u8 rtl_cmd_type;
static u8 rtl_cmd_width;
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len)
{
if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO)
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index 809a3ae..88a98cf 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -77,6 +77,8 @@
#include <asm/processor.h>
#include "intel_ips.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
/*
@@ -344,19 +346,6 @@
static bool
ips_gpu_turbo_enabled(struct ips_driver *ips);
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
/**
* ips_cpu_busy - is CPU busy?
* @ips: IPS driver struct
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index b06a239..d0e1180 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -150,7 +150,7 @@
if (ret != 0)
return ret;
val &= MAX8649_VOL_MASK;
- voltage = max8649_list_voltage(rdev, (unsigned char)ret); /* uV */
+ voltage = max8649_list_voltage(rdev, (unsigned char)val); /* uV */
/* get rate */
ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index 80ecafe..62dcd0a 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -254,6 +254,7 @@
return num;
}
+EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt);
struct mc13xxx_regulator_init_data * __devinit mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
@@ -291,6 +292,7 @@
return data;
}
+EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt);
#endif
MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index a3ad957..729fb84 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -57,6 +57,7 @@
void __iomem *rtt;
struct rtc_device *rtcdev;
u32 imr;
+ void __iomem *gpbr;
};
#define rtt_readl(rtc, field) \
@@ -65,9 +66,9 @@
__raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field)
#define gpbr_readl(rtc) \
- at91_sys_read(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR)
+ __raw_readl((rtc)->gpbr)
#define gpbr_writel(rtc, val) \
- at91_sys_write(AT91_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR, (val))
+ __raw_writel((val), (rtc)->gpbr)
/*
* Read current time and date in RTC
@@ -287,16 +288,19 @@
/*
* Initialize and install RTC driver
*/
-static int __init at91_rtc_probe(struct platform_device *pdev)
+static int __devinit at91_rtc_probe(struct platform_device *pdev)
{
- struct resource *r;
+ struct resource *r, *r_gpbr;
struct sam9_rtc *rtc;
int ret;
u32 mr;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r)
+ r_gpbr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!r || !r_gpbr) {
+ dev_err(&pdev->dev, "need 2 ressources\n");
return -ENODEV;
+ }
rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
if (!rtc)
@@ -307,8 +311,19 @@
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, rtc);
- rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
- rtc->rtt += r->start;
+ rtc->rtt = ioremap(r->start, resource_size(r));
+ if (!rtc->rtt) {
+ dev_err(&pdev->dev, "failed to map registers, aborting.\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ rtc->gpbr = ioremap(r_gpbr->start, resource_size(r_gpbr));
+ if (!rtc->gpbr) {
+ dev_err(&pdev->dev, "failed to map gpbr registers, aborting.\n");
+ ret = -ENOMEM;
+ goto fail_gpbr;
+ }
mr = rtt_readl(rtc, MR);
@@ -326,7 +341,7 @@
&at91_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtcdev)) {
ret = PTR_ERR(rtc->rtcdev);
- goto fail;
+ goto fail_register;
}
/* register irq handler after we know what name we'll use */
@@ -336,7 +351,7 @@
if (ret) {
dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS);
rtc_device_unregister(rtc->rtcdev);
- goto fail;
+ goto fail_register;
}
/* NOTE: sam9260 rev A silicon has a ROM bug which resets the
@@ -351,6 +366,10 @@
return 0;
+fail_register:
+ iounmap(rtc->gpbr);
+fail_gpbr:
+ iounmap(rtc->rtt);
fail:
platform_set_drvdata(pdev, NULL);
kfree(rtc);
@@ -360,7 +379,7 @@
/*
* Disable and remove the RTC driver
*/
-static int __exit at91_rtc_remove(struct platform_device *pdev)
+static int __devexit at91_rtc_remove(struct platform_device *pdev)
{
struct sam9_rtc *rtc = platform_get_drvdata(pdev);
u32 mr = rtt_readl(rtc, MR);
@@ -371,6 +390,8 @@
rtc_device_unregister(rtc->rtcdev);
+ iounmap(rtc->gpbr);
+ iounmap(rtc->rtt);
platform_set_drvdata(pdev, NULL);
kfree(rtc);
return 0;
@@ -433,63 +454,20 @@
#endif
static struct platform_driver at91_rtc_driver = {
- .driver.name = "rtc-at91sam9",
- .driver.owner = THIS_MODULE,
- .remove = __exit_p(at91_rtc_remove),
+ .probe = at91_rtc_probe,
+ .remove = __devexit_p(at91_rtc_remove),
.shutdown = at91_rtc_shutdown,
.suspend = at91_rtc_suspend,
.resume = at91_rtc_resume,
+ .driver = {
+ .name = "rtc-at91sam9",
+ .owner = THIS_MODULE,
+ },
};
-/* Chips can have more than one RTT module, and they can be used for more
- * than just RTCs. So we can't just register as "the" RTT driver.
- *
- * A normal approach in such cases is to create a library to allocate and
- * free the modules. Here we just use bus_find_device() as like such a
- * library, binding directly ... no runtime "library" footprint is needed.
- */
-static int __init at91_rtc_match(struct device *dev, void *v)
-{
- struct platform_device *pdev = to_platform_device(dev);
- int ret;
-
- /* continue searching if this isn't the RTT we need */
- if (strcmp("at91_rtt", pdev->name) != 0
- || pdev->id != CONFIG_RTC_DRV_AT91SAM9_RTT)
- goto fail;
-
- /* else we found it ... but fail unless we can bind to the RTC driver */
- if (dev->driver) {
- dev_dbg(dev, "busy, can't use as RTC!\n");
- goto fail;
- }
- dev->driver = &at91_rtc_driver.driver;
- if (device_attach(dev) == 0) {
- dev_dbg(dev, "can't attach RTC!\n");
- goto fail;
- }
- ret = at91_rtc_probe(pdev);
- if (ret == 0)
- return true;
-
- dev_dbg(dev, "RTC probe err %d!\n", ret);
-fail:
- return false;
-}
-
static int __init at91_rtc_init(void)
{
- int status;
- struct device *rtc;
-
- status = platform_driver_register(&at91_rtc_driver);
- if (status)
- return status;
- rtc = bus_find_device(&platform_bus_type, NULL,
- NULL, at91_rtc_match);
- if (!rtc)
- platform_driver_unregister(&at91_rtc_driver);
- return rtc ? 0 : -ENODEV;
+ return platform_driver_register(&at91_rtc_driver);
}
module_init(at91_rtc_init);
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 934458a..e71a50d 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -87,6 +87,7 @@
struct tty_struct *tty; /* pointer to tty structure if present */
struct raw3215_req *queued_read; /* pointer to queued read requests */
struct raw3215_req *queued_write;/* pointer to queued write requests */
+ struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */
wait_queue_head_t empty_wait; /* wait queue for flushing */
struct timer_list timer; /* timer for delayed output */
int line_pos; /* position on the line (for tabs) */
@@ -334,19 +335,23 @@
}
/*
+ * Call tty_wakeup from tasklet context
+ */
+static void raw3215_wakeup(unsigned long data)
+{
+ struct raw3215_info *raw = (struct raw3215_info *) data;
+ tty_wakeup(raw->tty);
+}
+
+/*
* Try to start the next IO and wake up processes waiting on the tty.
*/
static void raw3215_next_io(struct raw3215_info *raw)
{
- struct tty_struct *tty;
-
raw3215_mk_write_req(raw);
raw3215_try_io(raw);
- tty = raw->tty;
- if (tty != NULL &&
- RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) {
- tty_wakeup(tty);
- }
+ if (raw->tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE)
+ tasklet_schedule(&raw->tlet);
}
/*
@@ -682,6 +687,7 @@
return -ENOMEM;
}
init_waitqueue_head(&raw->empty_wait);
+ tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
@@ -901,6 +907,7 @@
raw->flags |= RAW3215_FIXED;
init_waitqueue_head(&raw->empty_wait);
+ tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
/* Request the console irq */
if (raw3215_startup(raw) != 0) {
@@ -966,6 +973,7 @@
tty->closing = 1;
/* Shutdown the terminal */
raw3215_shutdown(raw);
+ tasklet_kill(&raw->tlet);
tty->closing = 0;
raw->tty = NULL;
}
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 53a31c7..20c4557 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -364,10 +364,7 @@
struct rdac_controller *ctlr;
ctlr = container_of(kref, struct rdac_controller, kref);
- flush_workqueue(kmpath_rdacd);
- spin_lock(&list_lock);
list_del(&ctlr->node);
- spin_unlock(&list_lock);
kfree(ctlr);
}
@@ -376,20 +373,17 @@
{
struct rdac_controller *ctlr, *tmp;
- spin_lock(&list_lock);
-
list_for_each_entry(tmp, &ctlr_list, node) {
if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) &&
(tmp->index == index) &&
(tmp->host == sdev->host)) {
kref_get(&tmp->kref);
- spin_unlock(&list_lock);
return tmp;
}
}
ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
if (!ctlr)
- goto done;
+ return NULL;
/* initialize fields of controller */
memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN);
@@ -405,8 +399,7 @@
INIT_WORK(&ctlr->ms_work, send_mode_select);
INIT_LIST_HEAD(&ctlr->ms_head);
list_add(&ctlr->node, &ctlr_list);
-done:
- spin_unlock(&list_lock);
+
return ctlr;
}
@@ -517,9 +510,12 @@
index = 0;
else
index = 1;
+
+ spin_lock(&list_lock);
h->ctlr = get_controller(index, array_name, array_id, sdev);
if (!h->ctlr)
err = SCSI_DH_RES_TEMP_UNAVAIL;
+ spin_unlock(&list_lock);
}
return err;
}
@@ -906,7 +902,9 @@
return 0;
clean_ctlr:
+ spin_lock(&list_lock);
kref_put(&h->ctlr->kref, release_controller);
+ spin_unlock(&list_lock);
failed:
kfree(scsi_dh_data);
@@ -921,14 +919,19 @@
struct rdac_dh_data *h;
unsigned long flags;
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
scsi_dh_data = sdev->scsi_dh_data;
+ h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ if (h->ctlr && h->ctlr->ms_queued)
+ flush_workqueue(kmpath_rdacd);
+
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
sdev->scsi_dh_data = NULL;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
- h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ spin_lock(&list_lock);
if (h->ctlr)
kref_put(&h->ctlr->kref, release_controller);
+ spin_unlock(&list_lock);
kfree(scsi_dh_data);
module_put(THIS_MODULE);
sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 67b169b..b538f08 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4613,11 +4613,13 @@
ENTER;
ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
- dev_err(&ioa_cfg->pdev->dev,
- "Adapter being reset as a result of error recovery.\n");
+ if (!ioa_cfg->in_reset_reload) {
+ dev_err(&ioa_cfg->pdev->dev,
+ "Adapter being reset as a result of error recovery.\n");
- if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
- ioa_cfg->sdt_state = GET_DUMP;
+ if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
+ ioa_cfg->sdt_state = GET_DUMP;
+ }
rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
@@ -4907,7 +4909,7 @@
struct ipr_ioa_cfg *ioa_cfg;
struct ipr_resource_entry *res;
struct ipr_cmd_pkt *cmd_pkt;
- u32 ioasc;
+ u32 ioasc, int_reg;
int op_found = 0;
ENTER;
@@ -4920,7 +4922,17 @@
*/
if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
return FAILED;
- if (!res || !ipr_is_gscsi(res))
+ if (!res)
+ return FAILED;
+
+ /*
+ * If we are aborting a timed out op, chances are that the timeout was caused
+ * by a still not detected EEH error. In such cases, reading a register will
+ * trigger the EEH recovery infrastructure.
+ */
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+
+ if (!ipr_is_gscsi(res))
return FAILED;
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 1a65d65..418391b 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -1848,9 +1848,11 @@
if (state == SCIC_RESET ||
state == SCIC_INITIALIZING ||
state == SCIC_INITIALIZED) {
+ u8 oem_version = pci_info->orom ? pci_info->orom->hdr.version :
+ ISCI_ROM_VER_1_0;
if (sci_oem_parameters_validate(&ihost->oem_parameters,
- pci_info->orom->hdr.version))
+ oem_version))
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
return SCI_SUCCESS;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 0b2c955..a78036f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -4548,7 +4548,7 @@
printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
ioc->name, __func__);
r = 0;
- goto out;
+ goto out_unlocked;
}
if (mpt2sas_fwfault_debug)
@@ -4604,6 +4604,7 @@
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
mutex_unlock(&ioc->reset_in_progress_mutex);
+ out_unlocked:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
__func__));
return r;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index a2f1b30..9f41b3b 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1036,8 +1036,7 @@
vha->device_flags & DFLG_NO_CABLE)
len = snprintf(buf, PAGE_SIZE, "Link Down\n");
else if (atomic_read(&vha->loop_state) != LOOP_READY ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ qla2x00_reset_active(vha))
len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
else {
len = snprintf(buf, PAGE_SIZE, "Link Up - ");
@@ -1359,8 +1358,7 @@
return snprintf(buf, PAGE_SIZE, "\n");
temp = frac = 0;
- if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ if (qla2x00_reset_active(vha))
ql_log(ql_log_warn, vha, 0x707b,
"ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
@@ -1379,8 +1377,7 @@
int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ if (qla2x00_reset_active(vha))
ql_log(ql_log_warn, vha, 0x707c,
"ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
@@ -1693,9 +1690,7 @@
if (IS_FWI2_CAPABLE(ha)) {
rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
} else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
- !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) &&
- !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
- !ha->dpc_active) {
+ !qla2x00_reset_active(vha) && !ha->dpc_active) {
/* Must be in a 'READY' state for statistics retrieval. */
rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
stats, stats_dma);
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index b1d0f93..1682e2e 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -108,13 +108,6 @@
goto exit_fcp_prio_cfg;
}
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ret = -EBUSY;
- goto exit_fcp_prio_cfg;
- }
-
/* Get the sub command */
oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
@@ -646,13 +639,6 @@
dma_addr_t rsp_data_dma;
uint32_t rsp_data_len;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!vha->flags.online) {
ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n");
return -EIO;
@@ -874,13 +860,6 @@
int rval = 0;
uint32_t flag;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_QLA84XX(ha)) {
ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n");
return -EINVAL;
@@ -922,11 +901,6 @@
uint32_t flag;
uint32_t fw_ver;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))
- return -EBUSY;
-
if (!IS_QLA84XX(ha)) {
ql_dbg(ql_dbg_user, vha, 0x7032,
"Not 84xx, exiting.\n");
@@ -1036,14 +1010,6 @@
uint32_t data_len = 0;
uint32_t dma_direction = DMA_NONE;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7039,
- "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_QLA84XX(ha)) {
ql_log(ql_log_warn, vha, 0x703a,
"Not 84xx, exiting.\n");
@@ -1246,13 +1212,6 @@
bsg_job->reply->reply_payload_rcv_len = 0;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_IIDMA_CAPABLE(vha->hw)) {
ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n");
return -EINVAL;
@@ -1668,6 +1627,15 @@
vha = shost_priv(host);
}
+ if (qla2x00_reset_active(vha)) {
+ ql_dbg(ql_dbg_user, vha, 0x709f,
+ "BSG: ISP abort active/needed -- cmd=%d.\n",
+ bsg_job->request->msgcode);
+ bsg_job->reply->result = (DID_ERROR << 16);
+ bsg_job->job_done(bsg_job);
+ return -EBUSY;
+ }
+
ql_dbg(ql_dbg_user, vha, 0x7000,
"Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 7c54624..45cbf0b 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -19,7 +19,8 @@
* | DPC Thread | 0x401c | |
* | Async Events | 0x5057 | 0x5052 |
* | Timer Routines | 0x6011 | 0x600e,0x600f |
- * | User Space Interactions | 0x709e | |
+ * | User Space Interactions | 0x709e | 0x7018,0x702e |
+ * | | | 0x7039,0x7045 |
* | Task Management | 0x803c | 0x8025-0x8026 |
* | | | 0x800b,0x8039 |
* | AER/EEH | 0x900f | |
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index a6a4eeb..af1003f 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -44,6 +44,7 @@
* ISP2100 HBAs.
*/
#define MAILBOX_REGISTER_COUNT_2100 8
+#define MAILBOX_REGISTER_COUNT_2200 24
#define MAILBOX_REGISTER_COUNT 32
#define QLA2200A_RISC_ROM_VER 4
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 9902834..7cc4f36 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -131,3 +131,16 @@
}
return 0;
}
+
+static inline int
+qla2x00_reset_active(scsi_qla_host_t *vha)
+{
+ scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
+
+ /* Test appropriate base-vha and vha flags. */
+ return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
+ test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
+ test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
+}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e804585..349843e 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2090,7 +2090,6 @@
break;
case CT_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
- clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags);
break;
case ELS_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 34344d3..08f1d01 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -342,6 +342,8 @@
set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ /* Allow next mbx cmd to come in. */
+ complete(&ha->mbx_cmd_comp);
if (ha->isp_ops->abort_isp(vha)) {
/* Failed. retry later. */
set_bit(ISP_ABORT_NEEDED,
@@ -350,6 +352,7 @@
clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
ql_dbg(ql_dbg_mbx, base_vha, 0x101f,
"Finished abort_isp.\n");
+ goto mbx_done;
}
}
}
@@ -358,6 +361,7 @@
/* Allow next mbx cmd to come in. */
complete(&ha->mbx_cmd_comp);
+mbx_done:
if (rval) {
ql_dbg(ql_dbg_mbx, base_vha, 0x1020,
"**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n",
@@ -2581,7 +2585,8 @@
ql_dbg(ql_dbg_mbx, vha, 0x10a1, "Entered %s.\n", __func__);
mcp->mb[0] = MBC_STOP_FIRMWARE;
- mcp->out_mb = MBX_0;
+ mcp->mb[1] = 0;
+ mcp->out_mb = MBX_1|MBX_0;
mcp->in_mb = MBX_0;
mcp->tov = 5;
mcp->flags = 0;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 1cd46cd..270ba31 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1165,19 +1165,6 @@
qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
else
qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff);
-
- /* reset ms */
- val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
- val |= (1 << 1);
- qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
- msleep(20);
-
- /* unreset ms */
- val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
- val &= ~(1 << 1);
- qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
- msleep(20);
-
qla82xx_rom_unlock(ha);
/* Read the signature value from the flash.
@@ -3392,7 +3379,7 @@
QLA82XX_CRB_PEG_NET_3 + 0x3c),
qla82xx_rd_32(ha,
QLA82XX_CRB_PEG_NET_4 + 0x3c));
- if (LSW(MSB(halt_status)) == 0x67)
+ if (((halt_status & 0x1fffff00) >> 8) == 0x67)
ql_log(ql_log_warn, vha, 0xb052,
"Firmware aborted with "
"error code 0x00006700. Device is "
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4ed1e4a..036030c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -625,6 +625,12 @@
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
+
+ if (!fcport) {
+ cmd->result = DID_NO_CONNECT << 16;
+ goto qc24_fail_command;
+ }
+
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
@@ -877,6 +883,7 @@
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (ha->isp_ops->abort_command(sp)) {
+ ret = FAILED;
ql_dbg(ql_dbg_taskm, vha, 0x8003,
"Abort command mbx failed cmd=%p.\n", cmd);
} else {
@@ -1124,7 +1131,6 @@
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
- fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
struct qla_hw_data *ha = vha->hw;
int ret = FAILED;
unsigned int id, lun;
@@ -1133,15 +1139,6 @@
id = cmd->device->id;
lun = cmd->device->lun;
- if (!fcport) {
- return ret;
- }
-
- ret = fc_block_scsi_eh(cmd);
- if (ret != 0)
- return ret;
- ret = FAILED;
-
ql_log(ql_log_info, vha, 0x8018,
"ADAPTER RESET ISSUED nexus=%ld:%d:%d.\n", vha->host_no, id, lun);
@@ -2047,7 +2044,7 @@
ha->nvram_data_off = ~0;
ha->isp_ops = &qla2100_isp_ops;
} else if (IS_QLA2200(ha)) {
- ha->mbx_count = MAILBOX_REGISTER_COUNT;
+ ha->mbx_count = MAILBOX_REGISTER_COUNT_2200;
req_length = REQUEST_ENTRY_CNT_2200;
rsp_length = RESPONSE_ENTRY_CNT_2100;
ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 23f33a6..29d780c 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.12-k"
+#define QLA2XXX_VERSION "8.03.07.13-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 78f1111..65253df 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -10,6 +10,8 @@
#include "ql4_def.h"
#include "ql4_glbl.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define MASK(n) DMA_BIT_MASK(n)
#define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff))
#define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff))
@@ -655,27 +657,6 @@
return 0;
}
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
-#ifndef writeq
-static inline void writeq(__u64 val, volatile void __iomem *addr)
-{
- writel(val, addr);
- writel(val >> 32, addr+4);
-}
-#endif
-
static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha,
u64 off, void *data, int size)
{
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index bf8bf79..c467064 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -7,6 +7,7 @@
#include <linux/pm_runtime.h>
#include <linux/export.h>
+#include <linux/async.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -92,6 +93,19 @@
return err;
}
+static int scsi_bus_prepare(struct device *dev)
+{
+ if (scsi_is_sdev_device(dev)) {
+ /* sd probing uses async_schedule. Wait until it finishes. */
+ async_synchronize_full();
+
+ } else if (scsi_is_host_device(dev)) {
+ /* Wait until async scanning is finished */
+ scsi_complete_async_scans();
+ }
+ return 0;
+}
+
static int scsi_bus_suspend(struct device *dev)
{
return scsi_bus_suspend_common(dev, PMSG_SUSPEND);
@@ -110,6 +124,7 @@
#else /* CONFIG_PM_SLEEP */
#define scsi_bus_resume_common NULL
+#define scsi_bus_prepare NULL
#define scsi_bus_suspend NULL
#define scsi_bus_freeze NULL
#define scsi_bus_poweroff NULL
@@ -218,6 +233,7 @@
#endif /* CONFIG_PM_RUNTIME */
const struct dev_pm_ops scsi_bus_pm_ops = {
+ .prepare = scsi_bus_prepare,
.suspend = scsi_bus_suspend,
.resume = scsi_bus_resume_common,
.freeze = scsi_bus_freeze,
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 68eadd1..be4fa6d 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -109,6 +109,7 @@
#endif /* CONFIG_PROC_FS */
/* scsi_scan.c */
+extern int scsi_complete_async_scans(void);
extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int,
unsigned int, unsigned int, int);
extern void scsi_forget_host(struct Scsi_Host *);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 89da43f..29c4c04 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1815,6 +1815,7 @@
}
spin_unlock(&async_scan_lock);
+ scsi_autopm_put_host(shost);
scsi_host_put(shost);
kfree(data);
}
@@ -1841,7 +1842,6 @@
do_scsi_scan_host(shost);
scsi_finish_async_scan(data);
- scsi_autopm_put_host(shost);
return 0;
}
@@ -1869,7 +1869,7 @@
p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
if (IS_ERR(p))
do_scan_async(data);
- /* scsi_autopm_put_host(shost) is called in do_scan_async() */
+ /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */
}
EXPORT_SYMBOL(scsi_scan_host);
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 45fee36..92d314a 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -190,7 +190,7 @@
return -EINVAL;
}
- clk->parent = clk->parent_table[val];
+ clk_reparent(clk, clk->parent_table[val]);
if (!clk->parent) {
pr_err("sh_clk_init_parent: unable to set parent");
return -EINVAL;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 10605ec..f9a6be7 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1526,6 +1526,8 @@
atmel_pops.set_wake = fns->set_wake;
}
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
static void atmel_console_putchar(struct uart_port *port, int ch)
{
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index d136b8f..81e2c0d9 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -187,7 +187,10 @@
return -ENODEV;
dev->current_state = PCI_D0;
- if (!dev->irq) {
+ /* The xHCI driver supports MSI and MSI-X,
+ * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ */
+ if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
dev_err(&dev->dev,
"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
pci_name(dev));
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index eb19cba..e128232 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2447,8 +2447,10 @@
&& device_can_wakeup(&hcd->self.root_hub->dev))
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
- /* enable irqs just before we start the controller */
- if (usb_hcd_is_primary_hcd(hcd)) {
+ /* enable irqs just before we start the controller,
+ * if the BIOS provides legacy PCI irqs.
+ */
+ if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
if (retval)
goto err_request_irq;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a0613d8..265c2f6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -705,10 +705,26 @@
if (type == HUB_INIT3)
goto init3;
- /* After a resume, port power should still be on.
+ /* The superspeed hub except for root hub has to use Hub Depth
+ * value as an offset into the route string to locate the bits
+ * it uses to determine the downstream port number. So hub driver
+ * should send a set hub depth request to superspeed hub after
+ * the superspeed hub is set configuration in initialization or
+ * reset procedure.
+ *
+ * After a resume, port power should still be on.
* For any other type of activation, turn it on.
*/
if (type != HUB_RESUME) {
+ if (hdev->parent && hub_is_superspeed(hdev)) {
+ ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+ HUB_SET_DEPTH, USB_RT_HUB,
+ hdev->level - 1, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ dev_err(hub->intfdev,
+ "set hub depth failed\n");
+ }
/* Speed up system boot by using a delayed_work for the
* hub's initial power-up delays. This is pretty awkward
@@ -987,18 +1003,6 @@
goto fail;
}
- if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
- ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- HUB_SET_DEPTH, USB_RT_HUB,
- hdev->level - 1, 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
-
- if (ret < 0) {
- message = "can't set hub depth";
- goto fail;
- }
- }
-
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7ecb68a..85ae4b4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@
config USB_AT91
tristate "Atmel AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
@@ -150,7 +150,7 @@
config USB_ATMEL_USBA
tristate "Atmel USBA"
select USB_GADGET_DUALSPEED
- depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
USBA is the integrated high-speed USB Device controller on
the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 143a725..f99b3dc 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -41,6 +41,7 @@
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91sam9261_matrix.h>
+#include <mach/at91_matrix.h>
#include "at91_udc.h"
@@ -910,9 +911,9 @@
} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
u32 usbpucr;
- usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
usbpucr |= AT91_MATRIX_USBPUCR_PUON;
- at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
}
} else {
stop_activity(udc);
@@ -928,9 +929,9 @@
} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
u32 usbpucr;
- usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
+ usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
- at91_sys_write(AT91_MATRIX_USBPUCR, usbpucr);
+ at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
}
clk_off(udc);
}
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e2fb6d5..ce9dffb 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -332,12 +332,12 @@
static void toggle_bias(int is_on)
{
- unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
+ unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
if (is_on)
- at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
+ at91_pmc_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN);
else
- at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
+ at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN));
}
#else
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index ac53a66..7732d69 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -872,7 +872,17 @@
*/
if (pdev->vendor == 0x184e) /* vendor Netlogic */
return;
+ if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+ return;
+ if (pci_enable_device(pdev) < 0) {
+ dev_warn(&pdev->dev, "Can't enable PCI device, "
+ "BIOS handoff failed.\n");
+ return;
+ }
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
@@ -881,5 +891,6 @@
quirk_usb_disable_ehci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
+ pci_disable_device(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 35e257f..557b6f3 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -93,7 +93,7 @@
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
- portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+ portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 36cbe22..383fc85 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1126,26 +1126,42 @@
}
/*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
* microframes, rounded down to nearest power of 2.
*/
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
- struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+ struct usb_host_endpoint *ep, unsigned int desc_interval,
+ unsigned int min_exponent, unsigned int max_exponent)
{
unsigned int interval;
- interval = fls(8 * ep->desc.bInterval) - 1;
- interval = clamp_val(interval, 3, 10);
- if ((1 << interval) != 8 * ep->desc.bInterval)
+ interval = fls(desc_interval) - 1;
+ interval = clamp_val(interval, min_exponent, max_exponent);
+ if ((1 << interval) != desc_interval)
dev_warn(&udev->dev,
"ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
- 8 * ep->desc.bInterval);
+ desc_interval);
return interval;
}
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval * 8, 3, 10);
+}
+
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
@@ -1164,7 +1180,7 @@
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc)) {
- interval = ep->desc.bInterval;
+ interval = xhci_parse_microframe_interval(udev, ep);
break;
}
/* Fall through - SS and HS isoc/int have same decoding */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6bbe3c3..c939f5f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -352,6 +352,11 @@
/* hcd->irq is -1, we have MSI */
return 0;
+ if (!pdev->irq) {
+ xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+ return -EINVAL;
+ }
+
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8dbf51a..08a5575 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -136,6 +136,8 @@
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 39ed1f4..b54afce 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -788,7 +788,6 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
@@ -803,7 +802,6 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
- /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
@@ -828,7 +826,6 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
@@ -836,7 +833,6 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
@@ -846,7 +842,6 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
@@ -865,8 +860,6 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
@@ -887,28 +880,18 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
@@ -1083,127 +1066,27 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+ 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
- 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 8468eb7..75b838e 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -165,7 +165,7 @@
/* the array dimension is the number of default entries plus */
/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
/* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -179,6 +179,7 @@
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+ { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -188,7 +189,7 @@
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
};
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
@@ -206,6 +207,7 @@
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+ { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
{ }
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 2aac195..f140f1b 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -49,6 +49,10 @@
#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID 0x1a61
+#define ABBOTT_PRODUCT_ID 0x3410
+
/* Commands */
#define TI_GET_VERSION 0x01
#define TI_GET_PORT_STATUS 0x02
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 3dd7da9..db51ba1 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -788,15 +788,19 @@
struct Scsi_Host *host = us_to_host(us);
/* If the device is really gone, cut short reset delays */
- if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
+ if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+ wake_up(&us->delay_wait);
+ }
- /* Prevent SCSI-scanning (if it hasn't started yet)
- * and wait for the SCSI-scanning thread to stop.
+ /* Prevent SCSI scanning (if it hasn't started yet)
+ * or wait for the SCSI-scanning routine to stop.
*/
- set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
- wake_up(&us->delay_wait);
- wait_for_completion(&us->scanning_done);
+ cancel_delayed_work_sync(&us->scan_dwork);
+
+ /* Balance autopm calls if scanning was cancelled */
+ if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+ usb_autopm_put_interface_no_suspend(us->pusb_intf);
/* Removing the host will perform an orderly shutdown: caches
* synchronized, disks spun down, etc.
@@ -823,53 +827,28 @@
scsi_host_put(us_to_host(us));
}
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
{
- struct us_data *us = (struct us_data *)__us;
+ struct us_data *us = container_of(work, struct us_data,
+ scan_dwork.work);
struct device *dev = &us->pusb_intf->dev;
- dev_dbg(dev, "device found\n");
+ dev_dbg(dev, "starting scan\n");
- set_freezable();
-
- /*
- * Wait for the timeout to expire or for a disconnect
- *
- * We can't freeze in this thread or we risk causing khubd to
- * fail to freeze, but we can't be non-freezable either. Nor can
- * khubd freeze while waiting for scanning to complete as it may
- * hold the device lock, causing a hang when suspending devices.
- * So instead of using wait_event_freezable(), explicitly test
- * for (DONT_SCAN || freezing) in interruptible wait and proceed
- * if any of DONT_SCAN, freezing or timeout has happened.
- */
- if (delay_use > 0) {
- dev_dbg(dev, "waiting for device to settle "
- "before scanning\n");
- wait_event_interruptible_timeout(us->delay_wait,
- test_bit(US_FLIDX_DONT_SCAN, &us->dflags) ||
- freezing(current), delay_use * HZ);
+ /* For bulk-only devices, determine the max LUN value */
+ if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
+ mutex_lock(&us->dev_mutex);
+ us->max_lun = usb_stor_Bulk_max_lun(us);
+ mutex_unlock(&us->dev_mutex);
}
+ scsi_scan_host(us_to_host(us));
+ dev_dbg(dev, "scan complete\n");
- /* If the device is still connected, perform the scanning */
- if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
-
- /* For bulk-only devices, determine the max LUN value */
- if (us->protocol == USB_PR_BULK &&
- !(us->fflags & US_FL_SINGLE_LUN)) {
- mutex_lock(&us->dev_mutex);
- us->max_lun = usb_stor_Bulk_max_lun(us);
- mutex_unlock(&us->dev_mutex);
- }
- scsi_scan_host(us_to_host(us));
- dev_dbg(dev, "scan complete\n");
-
- /* Should we unbind if no devices were detected? */
- }
+ /* Should we unbind if no devices were detected? */
usb_autopm_put_interface(us->pusb_intf);
- complete_and_exit(&us->scanning_done, 0);
+ clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
}
static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
@@ -916,7 +895,7 @@
init_completion(&us->cmnd_ready);
init_completion(&(us->notify));
init_waitqueue_head(&us->delay_wait);
- init_completion(&us->scanning_done);
+ INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
/* Associate the us_data structure with the USB device */
result = associate_dev(us, intf);
@@ -947,7 +926,6 @@
/* Second part of general USB mass-storage probing */
int usb_stor_probe2(struct us_data *us)
{
- struct task_struct *th;
int result;
struct device *dev = &us->pusb_intf->dev;
@@ -988,20 +966,14 @@
goto BadDevice;
}
- /* Start up the thread for delayed SCSI-device scanning */
- th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
- if (IS_ERR(th)) {
- dev_warn(dev,
- "Unable to start the device-scanning thread\n");
- complete(&us->scanning_done);
- quiesce_and_remove_host(us);
- result = PTR_ERR(th);
- goto BadDevice;
- }
-
+ /* Submit the delayed_work for SCSI-device scanning */
usb_autopm_get_interface_no_resume(us->pusb_intf);
- wake_up_process(th);
+ set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
+ if (delay_use > 0)
+ dev_dbg(dev, "waiting for device to settle before scanning\n");
+ queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+ delay_use * HZ);
return 0;
/* We come here if there are any problems */
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 7b0f211..75f70f0 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -47,6 +47,7 @@
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/mutex.h>
+#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
struct us_data;
@@ -72,7 +73,7 @@
#define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */
#define US_FLIDX_RESETTING 4 /* device reset in progress */
#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
-#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */
+#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */
#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
@@ -147,8 +148,8 @@
/* mutual exclusion and synchronization structures */
struct completion cmnd_ready; /* to sleep thread on */
struct completion notify; /* thread begin/end */
- wait_queue_head_t delay_wait; /* wait during scan, reset */
- struct completion scanning_done; /* wait for scan thread */
+ wait_queue_head_t delay_wait; /* wait during reset */
+ struct delayed_work scan_dwork; /* for async scanning */
/* subdriver information */
void *extra; /* Any extra data */
diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c
index f997510..3a3fdc6 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/pvr2fb.c
@@ -1061,7 +1061,7 @@
int (*init)(void);
void (*exit)(void);
char name[16];
-} board_driver[] = {
+} board_driver[] __refdata = {
#ifdef CONFIG_SH_DREAMCAST
{ pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" },
#endif
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index b3046dc..7ceefd2 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -51,7 +51,7 @@
*/
static inline void at91_wdt_stop(void)
{
- at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN);
+ at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
}
/*
@@ -59,9 +59,9 @@
*/
static inline void at91_wdt_start(void)
{
- at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+ at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
- at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+ at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
}
/*
@@ -69,7 +69,7 @@
*/
static inline void at91_wdt_reload(void)
{
- at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+ at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
}
/* ......................................................................... */
diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c
index 14e2d99..4dcfced 100644
--- a/drivers/xen/cpu_hotplug.c
+++ b/drivers/xen/cpu_hotplug.c
@@ -30,7 +30,8 @@
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
- printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
+ if (!xen_initial_domain())
+ printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
return err;
}
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 7944a17..19834d1 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -884,7 +884,7 @@
int err;
err =
- sscanf(buf, " %04x:%02x:%02x.%1x-%08x:%1x:%08x", domain, bus, slot,
+ sscanf(buf, " %04x:%02x:%02x.%d-%08x:%1x:%08x", domain, bus, slot,
func, reg, size, mask);
if (err == 7)
return 0;
@@ -904,7 +904,7 @@
pci_dev_id->bus = bus;
pci_dev_id->devfn = PCI_DEVFN(slot, func);
- pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%01x\n",
+ pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
spin_lock_irqsave(&device_ids_lock, flags);
@@ -934,7 +934,7 @@
err = 0;
- pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%01x from "
+ pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%d from "
"seize list\n", domain, bus, slot, func);
}
}
@@ -1029,7 +1029,7 @@
break;
count += scnprintf(buf + count, PAGE_SIZE - count,
- "%04x:%02x:%02x.%01x\n",
+ "%04x:%02x:%02x.%d\n",
pci_dev_id->domain, pci_dev_id->bus,
PCI_SLOT(pci_dev_id->devfn),
PCI_FUNC(pci_dev_id->devfn));
diff --git a/drivers/xen/xen-pciback/xenbus.c b/drivers/xen/xen-pciback/xenbus.c
index d5dcf8d..64b11f9 100644
--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -206,6 +206,7 @@
goto out;
}
+ /* Note: The PV protocol uses %02x, don't change it */
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename, str,
"%04x:%02x:%02x.%02x", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
@@ -229,7 +230,7 @@
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! "
+ "(%04x:%02x:%02x.%d)! "
"perhaps already in-use?",
domain, bus, slot, func);
goto out;
@@ -274,7 +275,7 @@
if (!dev) {
err = -EINVAL;
dev_dbg(&pdev->xdev->dev, "Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! not owned by this domain\n",
+ "(%04x:%02x:%02x.%d)! not owned by this domain\n",
domain, bus, slot, func);
goto out;
}
diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c
index 527dc2a..89f7625 100644
--- a/drivers/xen/xenbus/xenbus_dev_frontend.c
+++ b/drivers/xen/xenbus/xenbus_dev_frontend.c
@@ -369,6 +369,10 @@
goto out;
}
token++;
+ if (memchr(token, 0, u->u.msg.len - (token - path)) == NULL) {
+ rc = -EILSEQ;
+ goto out;
+ }
if (msg_type == XS_WATCH) {
watch = alloc_watch_adapter(path, token);
diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index d8d8e7b..eb1cc92 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -110,6 +110,7 @@
int sub_version;
int min_proto;
int max_proto;
+ int compat_daemon;
unsigned long exp_timeout;
unsigned int type;
int reghost_enabled;
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 76741d8..85f1fcd 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -385,6 +385,7 @@
sbi->pipefd = pipefd;
sbi->pipe = pipe;
sbi->catatonic = 0;
+ sbi->compat_daemon = is_compat_task();
}
out:
mutex_unlock(&sbi->wq_mutex);
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 450f529..1feb68e 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -124,6 +124,7 @@
/* Negative dentry - try next */
if (!simple_positive(q)) {
spin_unlock(&p->d_lock);
+ lock_set_subclass(&q->d_lock.dep_map, 0, _RET_IP_);
p = q;
goto again;
}
@@ -186,6 +187,7 @@
/* Negative dentry - try next */
if (!simple_positive(ret)) {
spin_unlock(&p->d_lock);
+ lock_set_subclass(&ret->d_lock.dep_map, 0, _RET_IP_);
p = ret;
goto again;
}
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index e16980b..06858d9 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -19,6 +19,7 @@
#include <linux/parser.h>
#include <linux/bitops.h>
#include <linux/magic.h>
+#include <linux/compat.h>
#include "autofs_i.h"
#include <linux/module.h>
@@ -224,6 +225,7 @@
set_autofs_type_indirect(&sbi->type);
sbi->min_proto = 0;
sbi->max_proto = 0;
+ sbi->compat_daemon = is_compat_task();
mutex_init(&sbi->wq_mutex);
mutex_init(&sbi->pipe_mutex);
spin_lock_init(&sbi->fs_lock);
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index da8876d..9c098db 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -91,7 +91,24 @@
return (bytes > 0);
}
-
+
+/*
+ * The autofs_v5 packet was misdesigned.
+ *
+ * The packets are identical on x86-32 and x86-64, but have different
+ * alignment. Which means that 'sizeof()' will give different results.
+ * Fix it up for the case of running 32-bit user mode on a 64-bit kernel.
+ */
+static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi)
+{
+ size_t pktsz = sizeof(struct autofs_v5_packet);
+#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT)
+ if (sbi->compat_daemon > 0)
+ pktsz -= 4;
+#endif
+ return pktsz;
+}
+
static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
struct autofs_wait_queue *wq,
int type)
@@ -155,8 +172,7 @@
{
struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet;
- pktsz = sizeof(*packet);
-
+ pktsz = autofs_v5_packet_size(sbi);
packet->wait_queue_token = wq->wait_queue_token;
packet->len = wq->name.len;
memcpy(packet->name, wq->name.name, wq->name.len);
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index 633c701..98f6bf10 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -892,6 +892,8 @@
if (eb != eb_in)
free_extent_buffer(eb);
ret = inode_ref_info(parent, 0, fs_root, path, &found_key);
+ if (ret > 0)
+ ret = -ENOENT;
if (ret)
break;
next_inum = found_key.offset;
diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c
index b669a7d..d986824 100644
--- a/fs/btrfs/check-integrity.c
+++ b/fs/btrfs/check-integrity.c
@@ -644,7 +644,7 @@
static int btrfsic_process_superblock(struct btrfsic_state *state,
struct btrfs_fs_devices *fs_devices)
{
- int ret;
+ int ret = 0;
struct btrfs_super_block *selected_super;
struct list_head *dev_head = &fs_devices->devices;
struct btrfs_device *device;
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 14f1c5a..d02c27c 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -588,6 +588,8 @@
page_offset(bio->bi_io_vec->bv_page),
PAGE_CACHE_SIZE);
read_unlock(&em_tree->lock);
+ if (!em)
+ return -EIO;
compressed_len = em->block_len;
cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 27ebe61..80b6486 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -886,7 +886,7 @@
u64 reserved;
struct btrfs_space_info *space_info;
spinlock_t lock;
- unsigned int full:1;
+ unsigned int full;
};
/*
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 811d9f9..534266f 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2260,6 +2260,12 @@
goto fail_sb_buffer;
}
+ if (sectorsize < PAGE_SIZE) {
+ printk(KERN_WARNING "btrfs: Incompatible sector size "
+ "found on %s\n", sb->s_id);
+ goto fail_sb_buffer;
+ }
+
mutex_lock(&fs_info->chunk_mutex);
ret = btrfs_read_sys_array(tree_root);
mutex_unlock(&fs_info->chunk_mutex);
@@ -2301,6 +2307,12 @@
btrfs_close_extra_devices(fs_devices);
+ if (!fs_devices->latest_bdev) {
+ printk(KERN_CRIT "btrfs: failed to read devices on %s\n",
+ sb->s_id);
+ goto fail_tree_roots;
+ }
+
retry_root_backup:
blocksize = btrfs_level_size(tree_root,
btrfs_super_root_level(disk_super));
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 283af7a..37e0a80 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3312,7 +3312,8 @@
}
data_sinfo->bytes_may_use += bytes;
trace_btrfs_space_reservation(root->fs_info, "space_info",
- (u64)data_sinfo, bytes, 1);
+ (u64)(unsigned long)data_sinfo,
+ bytes, 1);
spin_unlock(&data_sinfo->lock);
return 0;
@@ -3333,7 +3334,8 @@
spin_lock(&data_sinfo->lock);
data_sinfo->bytes_may_use -= bytes;
trace_btrfs_space_reservation(root->fs_info, "space_info",
- (u64)data_sinfo, bytes, 0);
+ (u64)(unsigned long)data_sinfo,
+ bytes, 0);
spin_unlock(&data_sinfo->lock);
}
@@ -3611,12 +3613,15 @@
if (space_info != delayed_rsv->space_info)
return -ENOSPC;
+ spin_lock(&space_info->lock);
spin_lock(&delayed_rsv->lock);
- if (delayed_rsv->size < bytes) {
+ if (space_info->bytes_pinned + delayed_rsv->size < bytes) {
spin_unlock(&delayed_rsv->lock);
+ spin_unlock(&space_info->lock);
return -ENOSPC;
}
spin_unlock(&delayed_rsv->lock);
+ spin_unlock(&space_info->lock);
commit:
trans = btrfs_join_transaction(root);
@@ -3695,9 +3700,9 @@
if (used + orig_bytes <= space_info->total_bytes) {
space_info->bytes_may_use += orig_bytes;
trace_btrfs_space_reservation(root->fs_info,
- "space_info",
- (u64)space_info,
- orig_bytes, 1);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ orig_bytes, 1);
ret = 0;
} else {
/*
@@ -3766,9 +3771,9 @@
if (used + num_bytes < space_info->total_bytes + avail) {
space_info->bytes_may_use += orig_bytes;
trace_btrfs_space_reservation(root->fs_info,
- "space_info",
- (u64)space_info,
- orig_bytes, 1);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ orig_bytes, 1);
ret = 0;
} else {
wait_ordered = true;
@@ -3913,8 +3918,8 @@
spin_lock(&space_info->lock);
space_info->bytes_may_use -= num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)space_info,
- num_bytes, 0);
+ (u64)(unsigned long)space_info,
+ num_bytes, 0);
space_info->reservation_progress++;
spin_unlock(&space_info->lock);
}
@@ -4105,7 +4110,7 @@
num_bytes += div64_u64(data_used + meta_used, 50);
if (num_bytes * 3 > meta_used)
- num_bytes = div64_u64(meta_used, 3);
+ num_bytes = div64_u64(meta_used, 3) * 2;
return ALIGN(num_bytes, fs_info->extent_root->leafsize << 10);
}
@@ -4132,14 +4137,14 @@
block_rsv->reserved += num_bytes;
sinfo->bytes_may_use += num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)sinfo, num_bytes, 1);
+ (u64)(unsigned long)sinfo, num_bytes, 1);
}
if (block_rsv->reserved >= block_rsv->size) {
num_bytes = block_rsv->reserved - block_rsv->size;
sinfo->bytes_may_use -= num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)sinfo, num_bytes, 0);
+ (u64)(unsigned long)sinfo, num_bytes, 0);
sinfo->reservation_progress++;
block_rsv->reserved = block_rsv->size;
block_rsv->full = 1;
@@ -4192,7 +4197,8 @@
if (!trans->bytes_reserved)
return;
- trace_btrfs_space_reservation(root->fs_info, "transaction", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "transaction",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 0);
btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
trans->bytes_reserved = 0;
@@ -4710,9 +4716,9 @@
space_info->bytes_reserved += num_bytes;
if (reserve == RESERVE_ALLOC) {
trace_btrfs_space_reservation(cache->fs_info,
- "space_info",
- (u64)space_info,
- num_bytes, 0);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ num_bytes, 0);
space_info->bytes_may_use -= num_bytes;
}
}
@@ -7886,9 +7892,16 @@
u64 start;
u64 end;
u64 trimmed = 0;
+ u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy);
int ret = 0;
- cache = btrfs_lookup_block_group(fs_info, range->start);
+ /*
+ * try to trim all FS space, our block group may start from non-zero.
+ */
+ if (range->len == total_bytes)
+ cache = btrfs_lookup_first_block_group(fs_info, range->start);
+ else
+ cache = btrfs_lookup_block_group(fs_info, range->start);
while (cache) {
if (cache->key.objectid >= (range->start + range->len)) {
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index fcf77e1..a55fbe6 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -513,6 +513,15 @@
WARN_ON(state->end < start);
last_end = state->end;
+ if (state->end < end && !need_resched())
+ next_node = rb_next(&state->rb_node);
+ else
+ next_node = NULL;
+
+ /* the state doesn't have the wanted bits, go ahead */
+ if (!(state->state & bits))
+ goto next;
+
/*
* | ---- desired range ---- |
* | state | or
@@ -565,20 +574,15 @@
goto out;
}
- if (state->end < end && prealloc && !need_resched())
- next_node = rb_next(&state->rb_node);
- else
- next_node = NULL;
-
set |= clear_state_bit(tree, state, &bits, wake);
+next:
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
if (start <= end && next_node) {
state = rb_entry(next_node, struct extent_state,
rb_node);
- if (state->start == start)
- goto hit_next;
+ goto hit_next;
}
goto search_again;
@@ -961,8 +965,6 @@
set_state_bits(tree, state, &bits);
clear_state_bit(tree, state, &clear_bits, 0);
-
- merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
@@ -1007,7 +1009,6 @@
if (state->end <= end) {
set_state_bits(tree, state, &bits);
clear_state_bit(tree, state, &clear_bits, 0);
- merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
@@ -1068,8 +1069,6 @@
set_state_bits(tree, prealloc, &bits);
clear_state_bit(tree, prealloc, &clear_bits, 0);
-
- merge_state(tree, prealloc);
prealloc = NULL;
goto out;
}
@@ -2154,13 +2153,46 @@
"this_mirror=%d, num_copies=%d, in_validation=%d\n", read_mode,
failrec->this_mirror, num_copies, failrec->in_validation);
- tree->ops->submit_bio_hook(inode, read_mode, bio, failrec->this_mirror,
- failrec->bio_flags, 0);
- return 0;
+ ret = tree->ops->submit_bio_hook(inode, read_mode, bio,
+ failrec->this_mirror,
+ failrec->bio_flags, 0);
+ return ret;
}
/* lots and lots of room for performance fixes in the end_bio funcs */
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end)
+{
+ int uptodate = (err == 0);
+ struct extent_io_tree *tree;
+ int ret;
+
+ tree = &BTRFS_I(page->mapping->host)->io_tree;
+
+ if (tree->ops && tree->ops->writepage_end_io_hook) {
+ ret = tree->ops->writepage_end_io_hook(page, start,
+ end, NULL, uptodate);
+ if (ret)
+ uptodate = 0;
+ }
+
+ if (!uptodate && tree->ops &&
+ tree->ops->writepage_io_failed_hook) {
+ ret = tree->ops->writepage_io_failed_hook(NULL, page,
+ start, end, NULL);
+ /* Writeback already completed */
+ if (ret == 0)
+ return 1;
+ }
+
+ if (!uptodate) {
+ clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
+ ClearPageUptodate(page);
+ SetPageError(page);
+ }
+ return 0;
+}
+
/*
* after a writepage IO is done, we need to:
* clear the uptodate bits on error
@@ -2172,13 +2204,11 @@
*/
static void end_bio_extent_writepage(struct bio *bio, int err)
{
- int uptodate = err == 0;
struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
struct extent_io_tree *tree;
u64 start;
u64 end;
int whole_page;
- int ret;
do {
struct page *page = bvec->bv_page;
@@ -2195,28 +2225,9 @@
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
- if (tree->ops && tree->ops->writepage_end_io_hook) {
- ret = tree->ops->writepage_end_io_hook(page, start,
- end, NULL, uptodate);
- if (ret)
- uptodate = 0;
- }
- if (!uptodate && tree->ops &&
- tree->ops->writepage_io_failed_hook) {
- ret = tree->ops->writepage_io_failed_hook(bio, page,
- start, end, NULL);
- if (ret == 0) {
- uptodate = (err == 0);
- continue;
- }
- }
-
- if (!uptodate) {
- clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
- ClearPageUptodate(page);
- SetPageError(page);
- }
+ if (end_extent_writepage(page, err, start, end))
+ continue;
if (whole_page)
end_page_writeback(page);
@@ -2779,9 +2790,12 @@
delalloc_start = delalloc_end + 1;
continue;
}
- tree->ops->fill_delalloc(inode, page, delalloc_start,
- delalloc_end, &page_started,
- &nr_written);
+ ret = tree->ops->fill_delalloc(inode, page,
+ delalloc_start,
+ delalloc_end,
+ &page_started,
+ &nr_written);
+ BUG_ON(ret);
/*
* delalloc_end is already one less than the total
* length, so we don't subtract one from
@@ -2818,8 +2832,12 @@
if (tree->ops && tree->ops->writepage_start_hook) {
ret = tree->ops->writepage_start_hook(page, start,
page_end);
- if (ret == -EAGAIN) {
- redirty_page_for_writepage(wbc, page);
+ if (ret) {
+ /* Fixup worker will requeue */
+ if (ret == -EBUSY)
+ wbc->pages_skipped++;
+ else
+ redirty_page_for_writepage(wbc, page);
update_nr_written(page, wbc, nr_written);
unlock_page(page);
ret = 0;
@@ -3289,7 +3307,7 @@
len = end - start + 1;
write_lock(&map->lock);
em = lookup_extent_mapping(map, start, len);
- if (IS_ERR_OR_NULL(em)) {
+ if (!em) {
write_unlock(&map->lock);
break;
}
@@ -3853,10 +3871,9 @@
num_pages = num_extent_pages(eb->start, eb->len);
clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
- if (eb_straddles_pages(eb)) {
- clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
- cached_state, GFP_NOFS);
- }
+ clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
+ cached_state, GFP_NOFS);
+
for (i = 0; i < num_pages; i++) {
page = extent_buffer_page(eb, i);
if (page)
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index bc6a042cb..cecc351 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -319,4 +319,5 @@
int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
u64 length, u64 logical, struct page *page,
int mirror_num);
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end);
#endif
diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h
index 33a7890..1195f09 100644
--- a/fs/btrfs/extent_map.h
+++ b/fs/btrfs/extent_map.h
@@ -26,8 +26,8 @@
unsigned long flags;
struct block_device *bdev;
atomic_t refs;
- unsigned int in_tree:1;
- unsigned int compress_type:4;
+ unsigned int in_tree;
+ unsigned int compress_type;
};
struct extent_map_tree {
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 859ba2d..e8d06b6 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1605,6 +1605,14 @@
return -EOPNOTSUPP;
/*
+ * Make sure we have enough space before we do the
+ * allocation.
+ */
+ ret = btrfs_check_data_free_space(inode, len);
+ if (ret)
+ return ret;
+
+ /*
* wait for ordered IO before we have any locks. We'll loop again
* below with the locks held.
*/
@@ -1667,27 +1675,12 @@
if (em->block_start == EXTENT_MAP_HOLE ||
(cur_offset >= inode->i_size &&
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
-
- /*
- * Make sure we have enough space before we do the
- * allocation.
- */
- ret = btrfs_check_data_free_space(inode, last_byte -
- cur_offset);
- if (ret) {
- free_extent_map(em);
- break;
- }
-
ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
last_byte - cur_offset,
1 << inode->i_blkbits,
offset + len,
&alloc_hint);
- /* Let go of our reservation. */
- btrfs_free_reserved_data_space(inode, last_byte -
- cur_offset);
if (ret < 0) {
free_extent_map(em);
break;
@@ -1715,6 +1708,8 @@
&cached_state, GFP_NOFS);
out:
mutex_unlock(&inode->i_mutex);
+ /* Let go of our reservation. */
+ btrfs_free_reserved_data_space(inode, len);
return ret;
}
@@ -1761,7 +1756,7 @@
start - root->sectorsize,
root->sectorsize, 0);
if (IS_ERR(em)) {
- ret = -ENXIO;
+ ret = PTR_ERR(em);
goto out;
}
last_end = em->start + em->len;
@@ -1773,7 +1768,7 @@
while (1) {
em = btrfs_get_extent_fiemap(inode, NULL, 0, start, len, 0);
if (IS_ERR(em)) {
- ret = -ENXIO;
+ ret = PTR_ERR(em);
break;
}
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index c2f2059..710ea38 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -777,6 +777,7 @@
spin_lock(&block_group->lock);
if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) {
spin_unlock(&block_group->lock);
+ btrfs_free_path(path);
goto out;
}
spin_unlock(&block_group->lock);
diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c
index 213ffa8..ee15d88 100644
--- a/fs/btrfs/inode-map.c
+++ b/fs/btrfs/inode-map.c
@@ -438,7 +438,8 @@
trans->bytes_reserved);
if (ret)
goto out;
- trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 1);
again:
inode = lookup_free_ino_inode(root, path);
@@ -500,7 +501,8 @@
out_put:
iput(inode);
out_release:
- trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 0);
btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
out:
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 32214fe..892b347 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1555,6 +1555,7 @@
struct inode *inode;
u64 page_start;
u64 page_end;
+ int ret;
fixup = container_of(work, struct btrfs_writepage_fixup, work);
page = fixup->page;
@@ -1582,12 +1583,21 @@
page_end, &cached_state, GFP_NOFS);
unlock_page(page);
btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
goto again;
}
- BUG();
+ ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
+ if (ret) {
+ mapping_set_error(page->mapping, ret);
+ end_extent_writepage(page, ret, page_start, page_end);
+ ClearPageChecked(page);
+ goto out;
+ }
+
btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state);
ClearPageChecked(page);
+ set_page_dirty(page);
out:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, page_start, page_end,
&cached_state, GFP_NOFS);
@@ -1630,7 +1640,7 @@
fixup->work.func = btrfs_writepage_fixup_worker;
fixup->page = page;
btrfs_queue_worker(&root->fs_info->fixup_workers, &fixup->work);
- return -EAGAIN;
+ return -EBUSY;
}
static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,
@@ -4575,7 +4585,8 @@
ret = btrfs_insert_dir_item(trans, root, name, name_len,
parent_inode, &key,
btrfs_inode_type(inode), index);
- BUG_ON(ret);
+ if (ret)
+ goto fail_dir_item;
btrfs_i_size_write(parent_inode, parent_inode->i_size +
name_len * 2);
@@ -4583,6 +4594,23 @@
ret = btrfs_update_inode(trans, root, parent_inode);
}
return ret;
+
+fail_dir_item:
+ if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ u64 local_index;
+ int err;
+ err = btrfs_del_root_ref(trans, root->fs_info->tree_root,
+ key.objectid, root->root_key.objectid,
+ parent_ino, &local_index, name, name_len);
+
+ } else if (add_backref) {
+ u64 local_index;
+ int err;
+
+ err = btrfs_del_inode_ref(trans, root, name, name_len,
+ ino, parent_ino, &local_index);
+ }
+ return ret;
}
static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
@@ -6696,8 +6724,10 @@
int err;
u64 index = 0;
- inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid,
- new_dirid, S_IFDIR | 0700, &index);
+ inode = btrfs_new_inode(trans, new_root, NULL, "..", 2,
+ new_dirid, new_dirid,
+ S_IFDIR | (~current_umask() & S_IRWXUGO),
+ &index);
if (IS_ERR(inode))
return PTR_ERR(inode);
inode->i_op = &btrfs_dir_inode_operations;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 03bb62a..d8b5471 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -861,6 +861,7 @@
int i_done;
struct btrfs_ordered_extent *ordered;
struct extent_state *cached_state = NULL;
+ struct extent_io_tree *tree;
gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
if (isize == 0)
@@ -871,18 +872,34 @@
num_pages << PAGE_CACHE_SHIFT);
if (ret)
return ret;
-again:
- ret = 0;
i_done = 0;
+ tree = &BTRFS_I(inode)->io_tree;
/* step one, lock all the pages */
for (i = 0; i < num_pages; i++) {
struct page *page;
+again:
page = find_or_create_page(inode->i_mapping,
- start_index + i, mask);
+ start_index + i, mask);
if (!page)
break;
+ page_start = page_offset(page);
+ page_end = page_start + PAGE_CACHE_SIZE - 1;
+ while (1) {
+ lock_extent(tree, page_start, page_end, GFP_NOFS);
+ ordered = btrfs_lookup_ordered_extent(inode,
+ page_start);
+ unlock_extent(tree, page_start, page_end, GFP_NOFS);
+ if (!ordered)
+ break;
+
+ unlock_page(page);
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ lock_page(page);
+ }
+
if (!PageUptodate(page)) {
btrfs_readpage(NULL, page);
lock_page(page);
@@ -893,15 +910,22 @@
break;
}
}
+
isize = i_size_read(inode);
file_end = (isize - 1) >> PAGE_CACHE_SHIFT;
- if (!isize || page->index > file_end ||
- page->mapping != inode->i_mapping) {
+ if (!isize || page->index > file_end) {
/* whoops, we blew past eof, skip this page */
unlock_page(page);
page_cache_release(page);
break;
}
+
+ if (page->mapping != inode->i_mapping) {
+ unlock_page(page);
+ page_cache_release(page);
+ goto again;
+ }
+
pages[i] = page;
i_done++;
}
@@ -924,25 +948,6 @@
lock_extent_bits(&BTRFS_I(inode)->io_tree,
page_start, page_end - 1, 0, &cached_state,
GFP_NOFS);
- ordered = btrfs_lookup_first_ordered_extent(inode, page_end - 1);
- if (ordered &&
- ordered->file_offset + ordered->len > page_start &&
- ordered->file_offset < page_end) {
- btrfs_put_ordered_extent(ordered);
- unlock_extent_cached(&BTRFS_I(inode)->io_tree,
- page_start, page_end - 1,
- &cached_state, GFP_NOFS);
- for (i = 0; i < i_done; i++) {
- unlock_page(pages[i]);
- page_cache_release(pages[i]);
- }
- btrfs_wait_ordered_range(inode, page_start,
- page_end - page_start);
- goto again;
- }
- if (ordered)
- btrfs_put_ordered_extent(ordered);
-
clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start,
page_end - 1, EXTENT_DIRTY | EXTENT_DELALLOC |
EXTENT_DO_ACCOUNTING, 0, 0, &cached_state,
@@ -1327,6 +1332,12 @@
goto out;
}
+ if (name[0] == '.' &&
+ (namelen == 1 || (name[1] == '.' && namelen == 2))) {
+ ret = -EEXIST;
+ goto out;
+ }
+
if (subvol) {
ret = btrfs_mksubvol(&file->f_path, name, namelen,
NULL, transid, readonly);
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index 9770cc5..abc0fbf 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -1367,7 +1367,8 @@
}
static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev,
- u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length)
+ u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length,
+ u64 dev_offset)
{
struct btrfs_mapping_tree *map_tree =
&sdev->dev->dev_root->fs_info->mapping_tree;
@@ -1391,7 +1392,8 @@
goto out;
for (i = 0; i < map->num_stripes; ++i) {
- if (map->stripes[i].dev == sdev->dev) {
+ if (map->stripes[i].dev == sdev->dev &&
+ map->stripes[i].physical == dev_offset) {
ret = scrub_stripe(sdev, map, i, chunk_offset, length);
if (ret)
goto out;
@@ -1487,7 +1489,7 @@
break;
}
ret = scrub_chunk(sdev, chunk_tree, chunk_objectid,
- chunk_offset, length);
+ chunk_offset, length, found_key.offset);
btrfs_put_block_group(cache);
if (ret)
break;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 287a672..04b77e3 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -327,7 +327,8 @@
if (num_bytes) {
trace_btrfs_space_reservation(root->fs_info, "transaction",
- (u64)h, num_bytes, 1);
+ (u64)(unsigned long)h,
+ num_bytes, 1);
h->block_rsv = &root->fs_info->trans_block_rsv;
h->bytes_reserved = num_bytes;
}
@@ -915,7 +916,11 @@
dentry->d_name.name, dentry->d_name.len,
parent_inode, &key,
BTRFS_FT_DIR, index);
- BUG_ON(ret);
+ if (ret) {
+ pending->error = -EEXIST;
+ dput(parent);
+ goto fail;
+ }
btrfs_i_size_write(parent_inode, parent_inode->i_size +
dentry->d_name.len * 2);
@@ -993,12 +998,9 @@
{
struct btrfs_pending_snapshot *pending;
struct list_head *head = &trans->transaction->pending_snapshots;
- int ret;
- list_for_each_entry(pending, head, list) {
- ret = create_pending_snapshot(trans, fs_info, pending);
- BUG_ON(ret);
- }
+ list_for_each_entry(pending, head, list)
+ create_pending_snapshot(trans, fs_info, pending);
return 0;
}
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 0b4e2af..ef41f28 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -459,12 +459,23 @@
{
struct btrfs_device *device, *next;
+ struct block_device *latest_bdev = NULL;
+ u64 latest_devid = 0;
+ u64 latest_transid = 0;
+
mutex_lock(&uuid_mutex);
again:
/* This is the initialized path, it is safe to release the devices. */
list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
- if (device->in_fs_metadata)
+ if (device->in_fs_metadata) {
+ if (!latest_transid ||
+ device->generation > latest_transid) {
+ latest_devid = device->devid;
+ latest_transid = device->generation;
+ latest_bdev = device->bdev;
+ }
continue;
+ }
if (device->bdev) {
blkdev_put(device->bdev, device->mode);
@@ -487,6 +498,10 @@
goto again;
}
+ fs_devices->latest_bdev = latest_bdev;
+ fs_devices->latest_devid = latest_devid;
+ fs_devices->latest_trans = latest_transid;
+
mutex_unlock(&uuid_mutex);
return 0;
}
@@ -1953,7 +1968,7 @@
em = lookup_extent_mapping(em_tree, chunk_offset, 1);
read_unlock(&em_tree->lock);
- BUG_ON(em->start > chunk_offset ||
+ BUG_ON(!em || em->start > chunk_offset ||
em->start + em->len < chunk_offset);
map = (struct map_lookup *)em->bdev;
@@ -4356,6 +4371,20 @@
return -ENOMEM;
btrfs_set_buffer_uptodate(sb);
btrfs_set_buffer_lockdep_class(root->root_key.objectid, sb, 0);
+ /*
+ * The sb extent buffer is artifical and just used to read the system array.
+ * btrfs_set_buffer_uptodate() call does not properly mark all it's
+ * pages up-to-date when the page is larger: extent does not cover the
+ * whole page and consequently check_page_uptodate does not find all
+ * the page's extents up-to-date (the hole beyond sb),
+ * write_extent_buffer then triggers a WARN_ON.
+ *
+ * Regular short extents go through mark_extent_buffer_dirty/writeback cycle,
+ * but sb spans only this function. Add an explicit SetPageUptodate call
+ * to silence the warning eg. on PowerPC 64.
+ */
+ if (PAGE_CACHE_SIZE > BTRFS_SUPER_INFO_SIZE)
+ SetPageUptodate(sb->first_page);
write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE);
array_size = btrfs_super_sys_array_size(super_copy);
diff --git a/fs/compat.c b/fs/compat.c
index fa9d721..07880ba 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -131,41 +131,35 @@
static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
{
- compat_ino_t ino = stat->ino;
- typeof(ubuf->st_uid) uid = 0;
- typeof(ubuf->st_gid) gid = 0;
- int err;
+ struct compat_stat tmp;
- SET_UID(uid, stat->uid);
- SET_GID(gid, stat->gid);
-
- if ((u64) stat->size > MAX_NON_LFS ||
- !old_valid_dev(stat->dev) ||
- !old_valid_dev(stat->rdev))
- return -EOVERFLOW;
- if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
+ if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev))
return -EOVERFLOW;
- if (clear_user(ubuf, sizeof(*ubuf)))
- return -EFAULT;
-
- err = __put_user(old_encode_dev(stat->dev), &ubuf->st_dev);
- err |= __put_user(ino, &ubuf->st_ino);
- err |= __put_user(stat->mode, &ubuf->st_mode);
- err |= __put_user(stat->nlink, &ubuf->st_nlink);
- err |= __put_user(uid, &ubuf->st_uid);
- err |= __put_user(gid, &ubuf->st_gid);
- err |= __put_user(old_encode_dev(stat->rdev), &ubuf->st_rdev);
- err |= __put_user(stat->size, &ubuf->st_size);
- err |= __put_user(stat->atime.tv_sec, &ubuf->st_atime);
- err |= __put_user(stat->atime.tv_nsec, &ubuf->st_atime_nsec);
- err |= __put_user(stat->mtime.tv_sec, &ubuf->st_mtime);
- err |= __put_user(stat->mtime.tv_nsec, &ubuf->st_mtime_nsec);
- err |= __put_user(stat->ctime.tv_sec, &ubuf->st_ctime);
- err |= __put_user(stat->ctime.tv_nsec, &ubuf->st_ctime_nsec);
- err |= __put_user(stat->blksize, &ubuf->st_blksize);
- err |= __put_user(stat->blocks, &ubuf->st_blocks);
- return err;
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.st_dev = old_encode_dev(stat->dev);
+ tmp.st_ino = stat->ino;
+ if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
+ return -EOVERFLOW;
+ tmp.st_mode = stat->mode;
+ tmp.st_nlink = stat->nlink;
+ if (tmp.st_nlink != stat->nlink)
+ return -EOVERFLOW;
+ SET_UID(tmp.st_uid, stat->uid);
+ SET_GID(tmp.st_gid, stat->gid);
+ tmp.st_rdev = old_encode_dev(stat->rdev);
+ if ((u64) stat->size > MAX_NON_LFS)
+ return -EOVERFLOW;
+ tmp.st_size = stat->size;
+ tmp.st_atime = stat->atime.tv_sec;
+ tmp.st_atime_nsec = stat->atime.tv_nsec;
+ tmp.st_mtime = stat->mtime.tv_sec;
+ tmp.st_mtime_nsec = stat->mtime.tv_nsec;
+ tmp.st_ctime = stat->ctime.tv_sec;
+ tmp.st_ctime_nsec = stat->ctime.tv_nsec;
+ tmp.st_blocks = stat->blocks;
+ tmp.st_blksize = stat->blksize;
+ return copy_to_user(ubuf, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
asmlinkage long compat_sys_newstat(const char __user * filename,
diff --git a/fs/dcache.c b/fs/dcache.c
index 16a53cc..fe19ac1 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2968,7 +2968,7 @@
static void __init dcache_init_early(void)
{
- int loop;
+ unsigned int loop;
/* If hashes are distributed across NUMA nodes, defer
* hash allocation until vmalloc space is available.
@@ -2986,13 +2986,13 @@
&d_hash_mask,
0);
- for (loop = 0; loop < (1 << d_hash_shift); loop++)
+ for (loop = 0; loop < (1U << d_hash_shift); loop++)
INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
}
static void __init dcache_init(void)
{
- int loop;
+ unsigned int loop;
/*
* A constructor could be added for stable state like the lists,
@@ -3016,7 +3016,7 @@
&d_hash_mask,
0);
- for (loop = 0; loop < (1 << d_hash_shift); loop++)
+ for (loop = 0; loop < (1U << d_hash_shift); loop++)
INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
}
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 4a588db..f4aadd1 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -173,7 +173,7 @@
if (atomic_read(&inode->i_dio_count))
__inode_dio_wait(inode);
}
-EXPORT_SYMBOL_GPL(inode_dio_wait);
+EXPORT_SYMBOL(inode_dio_wait);
/*
* inode_dio_done - signal finish of a direct I/O requests
@@ -187,7 +187,7 @@
if (atomic_dec_and_test(&inode->i_dio_count))
wake_up_bit(&inode->i_state, __I_DIO_WAKEUP);
}
-EXPORT_SYMBOL_GPL(inode_dio_done);
+EXPORT_SYMBOL(inode_dio_done);
/*
* How many pages are in the queue?
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 63ab245..ea99312 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -1990,6 +1990,17 @@
return;
}
+static size_t ecryptfs_max_decoded_size(size_t encoded_size)
+{
+ /* Not exact; conservatively long. Every block of 4
+ * encoded characters decodes into a block of 3
+ * decoded characters. This segment of code provides
+ * the caller with the maximum amount of allocated
+ * space that @dst will need to point to in a
+ * subsequent call. */
+ return ((encoded_size + 1) * 3) / 4;
+}
+
/**
* ecryptfs_decode_from_filename
* @dst: If NULL, this function only sets @dst_size and returns. If
@@ -2008,13 +2019,7 @@
size_t dst_byte_offset = 0;
if (dst == NULL) {
- /* Not exact; conservatively long. Every block of 4
- * encoded characters decodes into a block of 3
- * decoded characters. This segment of code provides
- * the caller with the maximum amount of allocated
- * space that @dst will need to point to in a
- * subsequent call. */
- (*dst_size) = (((src_size + 1) * 3) / 4);
+ (*dst_size) = ecryptfs_max_decoded_size(src_size);
goto out;
}
while (src_byte_offset < src_size) {
@@ -2239,3 +2244,52 @@
out:
return rc;
}
+
+#define ENC_NAME_MAX_BLOCKLEN_8_OR_16 143
+
+int ecryptfs_set_f_namelen(long *namelen, long lower_namelen,
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat)
+{
+ struct blkcipher_desc desc;
+ struct mutex *tfm_mutex;
+ size_t cipher_blocksize;
+ int rc;
+
+ if (!(mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)) {
+ (*namelen) = lower_namelen;
+ return 0;
+ }
+
+ rc = ecryptfs_get_tfm_and_mutex_for_cipher_name(&desc.tfm, &tfm_mutex,
+ mount_crypt_stat->global_default_fn_cipher_name);
+ if (unlikely(rc)) {
+ (*namelen) = 0;
+ return rc;
+ }
+
+ mutex_lock(tfm_mutex);
+ cipher_blocksize = crypto_blkcipher_blocksize(desc.tfm);
+ mutex_unlock(tfm_mutex);
+
+ /* Return an exact amount for the common cases */
+ if (lower_namelen == NAME_MAX
+ && (cipher_blocksize == 8 || cipher_blocksize == 16)) {
+ (*namelen) = ENC_NAME_MAX_BLOCKLEN_8_OR_16;
+ return 0;
+ }
+
+ /* Return a safe estimate for the uncommon cases */
+ (*namelen) = lower_namelen;
+ (*namelen) -= ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE;
+ /* Since this is the max decoded size, subtract 1 "decoded block" len */
+ (*namelen) = ecryptfs_max_decoded_size(*namelen) - 3;
+ (*namelen) -= ECRYPTFS_TAG_70_MAX_METADATA_SIZE;
+ (*namelen) -= ECRYPTFS_FILENAME_MIN_RANDOM_PREPEND_BYTES;
+ /* Worst case is that the filename is padded nearly a full block size */
+ (*namelen) -= cipher_blocksize - 1;
+
+ if ((*namelen) < 0)
+ (*namelen) = 0;
+
+ return 0;
+}
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index a2362df..867b64c 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -162,6 +162,10 @@
#define ECRYPTFS_NON_NULL 0x42 /* A reasonable substitute for NULL */
#define MD5_DIGEST_SIZE 16
#define ECRYPTFS_TAG_70_DIGEST_SIZE MD5_DIGEST_SIZE
+#define ECRYPTFS_TAG_70_MIN_METADATA_SIZE (1 + ECRYPTFS_MIN_PKT_LEN_SIZE \
+ + ECRYPTFS_SIG_SIZE + 1 + 1)
+#define ECRYPTFS_TAG_70_MAX_METADATA_SIZE (1 + ECRYPTFS_MAX_PKT_LEN_SIZE \
+ + ECRYPTFS_SIG_SIZE + 1 + 1)
#define ECRYPTFS_FEK_ENCRYPTED_FILENAME_PREFIX "ECRYPTFS_FEK_ENCRYPTED."
#define ECRYPTFS_FEK_ENCRYPTED_FILENAME_PREFIX_SIZE 23
#define ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX "ECRYPTFS_FNEK_ENCRYPTED."
@@ -701,6 +705,8 @@
size_t *packet_size,
struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
char *data, size_t max_packet_size);
+int ecryptfs_set_f_namelen(long *namelen, long lower_namelen,
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat);
int ecryptfs_derive_iv(char *iv, struct ecryptfs_crypt_stat *crypt_stat,
loff_t offset);
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 19892d7..ab35b11 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -1085,6 +1085,8 @@
}
rc = vfs_setxattr(lower_dentry, name, value, size, flags);
+ if (!rc)
+ fsstack_copy_attr_all(dentry->d_inode, lower_dentry->d_inode);
out:
return rc;
}
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 8e3b943..2333203 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -679,10 +679,7 @@
* Octets N3-N4: Block-aligned encrypted filename
* - Consists of a minimum number of random characters, a \0
* separator, and then the filename */
- s->max_packet_size = (1 /* Tag 70 identifier */
- + 3 /* Max Tag 70 packet size */
- + ECRYPTFS_SIG_SIZE /* FNEK sig */
- + 1 /* Cipher identifier */
+ s->max_packet_size = (ECRYPTFS_TAG_70_MAX_METADATA_SIZE
+ s->block_aligned_filename_size);
if (dest == NULL) {
(*packet_size) = s->max_packet_size;
@@ -934,10 +931,10 @@
goto out;
}
s->desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
- if (max_packet_size < (1 + 1 + ECRYPTFS_SIG_SIZE + 1 + 1)) {
+ if (max_packet_size < ECRYPTFS_TAG_70_MIN_METADATA_SIZE) {
printk(KERN_WARNING "%s: max_packet_size is [%zd]; it must be "
"at least [%d]\n", __func__, max_packet_size,
- (1 + 1 + ECRYPTFS_SIG_SIZE + 1 + 1));
+ ECRYPTFS_TAG_70_MIN_METADATA_SIZE);
rc = -EINVAL;
goto out;
}
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index 10ec695..a46b3a8 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -150,7 +150,7 @@
/* This is a header extent */
char *page_virt;
- page_virt = kmap_atomic(page, KM_USER0);
+ page_virt = kmap_atomic(page);
memset(page_virt, 0, PAGE_CACHE_SIZE);
/* TODO: Support more than one header extent */
if (view_extent_num == 0) {
@@ -163,7 +163,7 @@
crypt_stat,
&written);
}
- kunmap_atomic(page_virt, KM_USER0);
+ kunmap_atomic(page_virt);
flush_dcache_page(page);
if (rc) {
printk(KERN_ERR "%s: Error reading xattr "
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index 5c0106f..b2a34a1 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -156,7 +156,7 @@
ecryptfs_page_idx, rc);
goto out;
}
- ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
+ ecryptfs_page_virt = kmap_atomic(ecryptfs_page);
/*
* pos: where we're now writing, offset: where the request was
@@ -179,7 +179,7 @@
(data + data_offset), num_bytes);
data_offset += num_bytes;
}
- kunmap_atomic(ecryptfs_page_virt, KM_USER0);
+ kunmap_atomic(ecryptfs_page_virt);
flush_dcache_page(ecryptfs_page);
SetPageUptodate(ecryptfs_page);
unlock_page(ecryptfs_page);
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 9df7fd6..cf15282 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -30,6 +30,8 @@
#include <linux/seq_file.h>
#include <linux/file.h>
#include <linux/crypto.h>
+#include <linux/statfs.h>
+#include <linux/magic.h>
#include "ecryptfs_kernel.h"
struct kmem_cache *ecryptfs_inode_info_cache;
@@ -102,10 +104,20 @@
static int ecryptfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+ int rc;
if (!lower_dentry->d_sb->s_op->statfs)
return -ENOSYS;
- return lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
+
+ rc = lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
+ if (rc)
+ return rc;
+
+ buf->f_type = ECRYPTFS_SUPER_MAGIC;
+ rc = ecryptfs_set_f_namelen(&buf->f_namelen, buf->f_namelen,
+ &ecryptfs_superblock_to_private(dentry->d_sb)->mount_crypt_stat);
+
+ return rc;
}
/**
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index aabdfc3..ea54cde 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -320,6 +320,11 @@
return !list_empty(p);
}
+static inline struct eppoll_entry *ep_pwq_from_wait(wait_queue_t *p)
+{
+ return container_of(p, struct eppoll_entry, wait);
+}
+
/* Get the "struct epitem" from a wait queue pointer */
static inline struct epitem *ep_item_from_wait(wait_queue_t *p)
{
@@ -467,6 +472,18 @@
put_cpu();
}
+static void ep_remove_wait_queue(struct eppoll_entry *pwq)
+{
+ wait_queue_head_t *whead;
+
+ rcu_read_lock();
+ /* If it is cleared by POLLFREE, it should be rcu-safe */
+ whead = rcu_dereference(pwq->whead);
+ if (whead)
+ remove_wait_queue(whead, &pwq->wait);
+ rcu_read_unlock();
+}
+
/*
* This function unregisters poll callbacks from the associated file
* descriptor. Must be called with "mtx" held (or "epmutex" if called from
@@ -481,7 +498,7 @@
pwq = list_first_entry(lsthead, struct eppoll_entry, llink);
list_del(&pwq->llink);
- remove_wait_queue(pwq->whead, &pwq->wait);
+ ep_remove_wait_queue(pwq);
kmem_cache_free(pwq_cache, pwq);
}
}
@@ -842,6 +859,17 @@
struct epitem *epi = ep_item_from_wait(wait);
struct eventpoll *ep = epi->ep;
+ if ((unsigned long)key & POLLFREE) {
+ ep_pwq_from_wait(wait)->whead = NULL;
+ /*
+ * whead = NULL above can race with ep_remove_wait_queue()
+ * which can do another remove_wait_queue() after us, so we
+ * can't use __remove_wait_queue(). whead->lock is held by
+ * the caller.
+ */
+ list_del_init(&wait->task_list);
+ }
+
spin_lock_irqsave(&ep->lock, flags);
/*
diff --git a/fs/inode.c b/fs/inode.c
index fb10d86..d3ebdbe 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1651,7 +1651,7 @@
*/
void __init inode_init_early(void)
{
- int loop;
+ unsigned int loop;
/* If hashes are distributed across NUMA nodes, defer
* hash allocation until vmalloc space is available.
@@ -1669,13 +1669,13 @@
&i_hash_mask,
0);
- for (loop = 0; loop < (1 << i_hash_shift); loop++)
+ for (loop = 0; loop < (1U << i_hash_shift); loop++)
INIT_HLIST_HEAD(&inode_hashtable[loop]);
}
void __init inode_init(void)
{
- int loop;
+ unsigned int loop;
/* inode slab cache */
inode_cachep = kmem_cache_create("inode_cache",
@@ -1699,7 +1699,7 @@
&i_hash_mask,
0);
- for (loop = 0; loop < (1 << i_hash_shift); loop++)
+ for (loop = 0; loop < (1U << i_hash_shift); loop++)
INIT_HLIST_HEAD(&inode_hashtable[loop]);
}
diff --git a/fs/namei.c b/fs/namei.c
index 208c6aa..a780ea5 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1095,8 +1095,10 @@
struct dentry *old;
/* Don't create child dentry for a dead directory. */
- if (unlikely(IS_DEADDIR(inode)))
+ if (unlikely(IS_DEADDIR(inode))) {
+ dput(dentry);
return ERR_PTR(-ENOENT);
+ }
old = inode->i_op->lookup(inode, dentry, nd);
if (unlikely(old)) {
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index f0c849c..ec9f6ef 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3575,8 +3575,8 @@
}
if (npages > 1) {
/* for decoding across pages */
- args.acl_scratch = alloc_page(GFP_KERNEL);
- if (!args.acl_scratch)
+ res.acl_scratch = alloc_page(GFP_KERNEL);
+ if (!res.acl_scratch)
goto out_free;
}
args.acl_len = npages * PAGE_SIZE;
@@ -3612,8 +3612,8 @@
for (i = 0; i < npages; i++)
if (pages[i])
__free_page(pages[i]);
- if (args.acl_scratch)
- __free_page(args.acl_scratch);
+ if (res.acl_scratch)
+ __free_page(res.acl_scratch);
return ret;
}
@@ -4883,8 +4883,10 @@
clp->cl_rpcclient->cl_auth->au_flavor);
res.server_scope = kzalloc(sizeof(struct server_scope), GFP_KERNEL);
- if (unlikely(!res.server_scope))
- return -ENOMEM;
+ if (unlikely(!res.server_scope)) {
+ status = -ENOMEM;
+ goto out;
+ }
status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (!status)
@@ -4901,12 +4903,13 @@
clp->server_scope = NULL;
}
- if (!clp->server_scope)
+ if (!clp->server_scope) {
clp->server_scope = res.server_scope;
- else
- kfree(res.server_scope);
+ goto out;
+ }
}
-
+ kfree(res.server_scope);
+out:
dprintk("<-- %s status= %d\n", __func__, status);
return status;
}
@@ -5008,37 +5011,53 @@
return status;
}
+static struct nfs4_slot *nfs4_alloc_slots(u32 max_slots, gfp_t gfp_flags)
+{
+ return kcalloc(max_slots, sizeof(struct nfs4_slot), gfp_flags);
+}
+
+static void nfs4_add_and_init_slots(struct nfs4_slot_table *tbl,
+ struct nfs4_slot *new,
+ u32 max_slots,
+ u32 ivalue)
+{
+ struct nfs4_slot *old = NULL;
+ u32 i;
+
+ spin_lock(&tbl->slot_tbl_lock);
+ if (new) {
+ old = tbl->slots;
+ tbl->slots = new;
+ tbl->max_slots = max_slots;
+ }
+ tbl->highest_used_slotid = -1; /* no slot is currently used */
+ for (i = 0; i < tbl->max_slots; i++)
+ tbl->slots[i].seq_nr = ivalue;
+ spin_unlock(&tbl->slot_tbl_lock);
+ kfree(old);
+}
+
/*
- * Reset a slot table
+ * (re)Initialise a slot table
*/
-static int nfs4_reset_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
- int ivalue)
+static int nfs4_realloc_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
+ u32 ivalue)
{
struct nfs4_slot *new = NULL;
- int i;
- int ret = 0;
+ int ret = -ENOMEM;
dprintk("--> %s: max_reqs=%u, tbl->max_slots %d\n", __func__,
max_reqs, tbl->max_slots);
/* Does the newly negotiated max_reqs match the existing slot table? */
if (max_reqs != tbl->max_slots) {
- ret = -ENOMEM;
- new = kmalloc(max_reqs * sizeof(struct nfs4_slot),
- GFP_NOFS);
+ new = nfs4_alloc_slots(max_reqs, GFP_NOFS);
if (!new)
goto out;
- ret = 0;
- kfree(tbl->slots);
}
- spin_lock(&tbl->slot_tbl_lock);
- if (new) {
- tbl->slots = new;
- tbl->max_slots = max_reqs;
- }
- for (i = 0; i < tbl->max_slots; ++i)
- tbl->slots[i].seq_nr = ivalue;
- spin_unlock(&tbl->slot_tbl_lock);
+ ret = 0;
+
+ nfs4_add_and_init_slots(tbl, new, max_reqs, ivalue);
dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
tbl, tbl->slots, tbl->max_slots);
out:
@@ -5061,36 +5080,6 @@
}
/*
- * Initialize slot table
- */
-static int nfs4_init_slot_table(struct nfs4_slot_table *tbl,
- int max_slots, int ivalue)
-{
- struct nfs4_slot *slot;
- int ret = -ENOMEM;
-
- BUG_ON(max_slots > NFS4_MAX_SLOT_TABLE);
-
- dprintk("--> %s: max_reqs=%u\n", __func__, max_slots);
-
- slot = kcalloc(max_slots, sizeof(struct nfs4_slot), GFP_NOFS);
- if (!slot)
- goto out;
- ret = 0;
-
- spin_lock(&tbl->slot_tbl_lock);
- tbl->max_slots = max_slots;
- tbl->slots = slot;
- tbl->highest_used_slotid = -1; /* no slot is currently used */
- spin_unlock(&tbl->slot_tbl_lock);
- dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
- tbl, tbl->slots, tbl->max_slots);
-out:
- dprintk("<-- %s: return %d\n", __func__, ret);
- return ret;
-}
-
-/*
* Initialize or reset the forechannel and backchannel tables
*/
static int nfs4_setup_session_slot_tables(struct nfs4_session *ses)
@@ -5101,25 +5090,16 @@
dprintk("--> %s\n", __func__);
/* Fore channel */
tbl = &ses->fc_slot_table;
- if (tbl->slots == NULL) {
- status = nfs4_init_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
- if (status) /* -ENOMEM */
- return status;
- } else {
- status = nfs4_reset_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
- if (status)
- return status;
- }
+ status = nfs4_realloc_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
+ if (status) /* -ENOMEM */
+ return status;
/* Back channel */
tbl = &ses->bc_slot_table;
- if (tbl->slots == NULL) {
- status = nfs4_init_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
- if (status)
- /* Fore and back channel share a connection so get
- * both slot tables or neither */
- nfs4_destroy_slot_tables(ses);
- } else
- status = nfs4_reset_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+ status = nfs4_realloc_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+ if (status && tbl->slots == NULL)
+ /* Fore and back channel share a connection so get
+ * both slot tables or neither */
+ nfs4_destroy_slot_tables(ses);
return status;
}
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index a53f33b..4539203 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1132,6 +1132,8 @@
{
struct nfs_client *clp = server->nfs_client;
+ if (test_and_clear_bit(NFS_DELEGATED_STATE, &state->flags))
+ nfs_async_inode_return_delegation(state->inode, &state->stateid);
nfs4_state_mark_reclaim_nograce(clp, state);
nfs4_schedule_state_manager(clp);
}
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 95e92e4..33bd8d0 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -2522,7 +2522,6 @@
xdr_inline_pages(&req->rq_rcv_buf, replen << 2,
args->acl_pages, args->acl_pgbase, args->acl_len);
- xdr_set_scratch_buffer(xdr, page_address(args->acl_scratch), PAGE_SIZE);
encode_nops(&hdr);
}
@@ -6032,6 +6031,10 @@
struct compound_hdr hdr;
int status;
+ if (res->acl_scratch != NULL) {
+ void *p = page_address(res->acl_scratch);
+ xdr_set_scratch_buffer(xdr, p, PAGE_SIZE);
+ }
status = decode_compound_hdr(xdr, &hdr);
if (status)
goto out;
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index be24469..a9856e3 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -1053,7 +1053,7 @@
handle_t *handle = NULL;
struct buffer_head *old_dir_bh = NULL;
struct buffer_head *new_dir_bh = NULL;
- nlink_t old_dir_nlink = old_dir->i_nlink;
+ u32 old_dir_nlink = old_dir->i_nlink;
struct ocfs2_dinode *old_di;
struct ocfs2_dir_lookup_result old_inode_dot_dot_res = { NULL, };
struct ocfs2_dir_lookup_result target_lookup_res = { NULL, };
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index 7898cd6..fc2c438 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -292,11 +292,26 @@
}
}
+/* Return 1 if 'cmd' will block on frozen filesystem */
+static int quotactl_cmd_write(int cmd)
+{
+ switch (cmd) {
+ case Q_GETFMT:
+ case Q_GETINFO:
+ case Q_SYNC:
+ case Q_XGETQSTAT:
+ case Q_XGETQUOTA:
+ case Q_XQUOTASYNC:
+ return 0;
+ }
+ return 1;
+}
+
/*
* look up a superblock on which quota ops will be performed
* - use the name of a block device to find the superblock thereon
*/
-static struct super_block *quotactl_block(const char __user *special)
+static struct super_block *quotactl_block(const char __user *special, int cmd)
{
#ifdef CONFIG_BLOCK
struct block_device *bdev;
@@ -309,7 +324,10 @@
putname(tmp);
if (IS_ERR(bdev))
return ERR_CAST(bdev);
- sb = get_super(bdev);
+ if (quotactl_cmd_write(cmd))
+ sb = get_super_thawed(bdev);
+ else
+ sb = get_super(bdev);
bdput(bdev);
if (!sb)
return ERR_PTR(-ENODEV);
@@ -361,7 +379,7 @@
pathp = &path;
}
- sb = quotactl_block(special);
+ sb = quotactl_block(special, cmds);
if (IS_ERR(sb)) {
ret = PTR_ERR(sb);
goto out;
diff --git a/fs/select.c b/fs/select.c
index d33418f..e782258 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -912,7 +912,7 @@
}
SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
- long, timeout_msecs)
+ int, timeout_msecs)
{
struct timespec end_time, *to = NULL;
int ret;
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 492465b..7ae2a57 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -30,6 +30,21 @@
#include <linux/signalfd.h>
#include <linux/syscalls.h>
+void signalfd_cleanup(struct sighand_struct *sighand)
+{
+ wait_queue_head_t *wqh = &sighand->signalfd_wqh;
+ /*
+ * The lockless check can race with remove_wait_queue() in progress,
+ * but in this case its caller should run under rcu_read_lock() and
+ * sighand_cachep is SLAB_DESTROY_BY_RCU, we can safely return.
+ */
+ if (likely(!waitqueue_active(wqh)))
+ return;
+
+ /* wait_queue_t->func(POLLFREE) should do remove_wait_queue() */
+ wake_up_poll(wqh, POLLHUP | POLLFREE);
+}
+
struct signalfd_ctx {
sigset_t sigmask;
};
diff --git a/fs/super.c b/fs/super.c
index 6015c02..6277ec6 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -634,6 +634,28 @@
EXPORT_SYMBOL(get_super);
/**
+ * get_super_thawed - get thawed superblock of a device
+ * @bdev: device to get the superblock for
+ *
+ * Scans the superblock list and finds the superblock of the file system
+ * mounted on the device. The superblock is returned once it is thawed
+ * (or immediately if it was not frozen). %NULL is returned if no match
+ * is found.
+ */
+struct super_block *get_super_thawed(struct block_device *bdev)
+{
+ while (1) {
+ struct super_block *s = get_super(bdev);
+ if (!s || s->s_frozen == SB_UNFROZEN)
+ return s;
+ up_read(&s->s_umount);
+ vfs_check_frozen(s, SB_FREEZE_WRITE);
+ put_super(s);
+ }
+}
+EXPORT_SYMBOL(get_super_thawed);
+
+/**
* get_active_super - get an active reference to the superblock of a device
* @bdev: device to get the superblock for
*
diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index cbcb7be..53db20e 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -139,10 +139,10 @@
if (!d->d_btimer) {
if ((d->d_blk_softlimit &&
- (be64_to_cpu(d->d_bcount) >=
+ (be64_to_cpu(d->d_bcount) >
be64_to_cpu(d->d_blk_softlimit))) ||
(d->d_blk_hardlimit &&
- (be64_to_cpu(d->d_bcount) >=
+ (be64_to_cpu(d->d_bcount) >
be64_to_cpu(d->d_blk_hardlimit)))) {
d->d_btimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_btimelimit);
@@ -151,10 +151,10 @@
}
} else {
if ((!d->d_blk_softlimit ||
- (be64_to_cpu(d->d_bcount) <
+ (be64_to_cpu(d->d_bcount) <=
be64_to_cpu(d->d_blk_softlimit))) &&
(!d->d_blk_hardlimit ||
- (be64_to_cpu(d->d_bcount) <
+ (be64_to_cpu(d->d_bcount) <=
be64_to_cpu(d->d_blk_hardlimit)))) {
d->d_btimer = 0;
}
@@ -162,10 +162,10 @@
if (!d->d_itimer) {
if ((d->d_ino_softlimit &&
- (be64_to_cpu(d->d_icount) >=
+ (be64_to_cpu(d->d_icount) >
be64_to_cpu(d->d_ino_softlimit))) ||
(d->d_ino_hardlimit &&
- (be64_to_cpu(d->d_icount) >=
+ (be64_to_cpu(d->d_icount) >
be64_to_cpu(d->d_ino_hardlimit)))) {
d->d_itimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_itimelimit);
@@ -174,10 +174,10 @@
}
} else {
if ((!d->d_ino_softlimit ||
- (be64_to_cpu(d->d_icount) <
+ (be64_to_cpu(d->d_icount) <=
be64_to_cpu(d->d_ino_softlimit))) &&
(!d->d_ino_hardlimit ||
- (be64_to_cpu(d->d_icount) <
+ (be64_to_cpu(d->d_icount) <=
be64_to_cpu(d->d_ino_hardlimit)))) {
d->d_itimer = 0;
}
@@ -185,10 +185,10 @@
if (!d->d_rtbtimer) {
if ((d->d_rtb_softlimit &&
- (be64_to_cpu(d->d_rtbcount) >=
+ (be64_to_cpu(d->d_rtbcount) >
be64_to_cpu(d->d_rtb_softlimit))) ||
(d->d_rtb_hardlimit &&
- (be64_to_cpu(d->d_rtbcount) >=
+ (be64_to_cpu(d->d_rtbcount) >
be64_to_cpu(d->d_rtb_hardlimit)))) {
d->d_rtbtimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_rtbtimelimit);
@@ -197,10 +197,10 @@
}
} else {
if ((!d->d_rtb_softlimit ||
- (be64_to_cpu(d->d_rtbcount) <
+ (be64_to_cpu(d->d_rtbcount) <=
be64_to_cpu(d->d_rtb_softlimit))) &&
(!d->d_rtb_hardlimit ||
- (be64_to_cpu(d->d_rtbcount) <
+ (be64_to_cpu(d->d_rtbcount) <=
be64_to_cpu(d->d_rtb_hardlimit)))) {
d->d_rtbtimer = 0;
}
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 15ff539..0ed9ee7 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -1981,7 +1981,7 @@
if (!errs && ddq->d_id) {
if (ddq->d_blk_softlimit &&
- be64_to_cpu(ddq->d_bcount) >=
+ be64_to_cpu(ddq->d_bcount) >
be64_to_cpu(ddq->d_blk_softlimit)) {
if (!ddq->d_btimer) {
if (flags & XFS_QMOPT_DOWARN)
@@ -1992,7 +1992,7 @@
}
}
if (ddq->d_ino_softlimit &&
- be64_to_cpu(ddq->d_icount) >=
+ be64_to_cpu(ddq->d_icount) >
be64_to_cpu(ddq->d_ino_softlimit)) {
if (!ddq->d_itimer) {
if (flags & XFS_QMOPT_DOWARN)
@@ -2003,7 +2003,7 @@
}
}
if (ddq->d_rtb_softlimit &&
- be64_to_cpu(ddq->d_rtbcount) >=
+ be64_to_cpu(ddq->d_rtbcount) >
be64_to_cpu(ddq->d_rtb_softlimit)) {
if (!ddq->d_rtbtimer) {
if (flags & XFS_QMOPT_DOWARN)
diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c
index eafbcff..711a86e 100644
--- a/fs/xfs/xfs_qm_syscalls.c
+++ b/fs/xfs/xfs_qm_syscalls.c
@@ -813,11 +813,11 @@
(XFS_IS_OQUOTA_ENFORCED(mp) &&
(dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) &&
dst->d_id != 0) {
- if (((int) dst->d_bcount >= (int) dst->d_blk_softlimit) &&
+ if (((int) dst->d_bcount > (int) dst->d_blk_softlimit) &&
(dst->d_blk_softlimit > 0)) {
ASSERT(dst->d_btimer != 0);
}
- if (((int) dst->d_icount >= (int) dst->d_ino_softlimit) &&
+ if (((int) dst->d_icount > (int) dst->d_ino_softlimit) &&
(dst->d_ino_softlimit > 0)) {
ASSERT(dst->d_itimer != 0);
}
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 329b06a..7adcdf1 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -1151,8 +1151,8 @@
{
struct xfs_log_item_desc *lidp;
- ASSERT(lip->li_mountp = tp->t_mountp);
- ASSERT(lip->li_ailp = tp->t_mountp->m_ail);
+ ASSERT(lip->li_mountp == tp->t_mountp);
+ ASSERT(lip->li_ailp == tp->t_mountp->m_ail);
lidp = kmem_zone_zalloc(xfs_log_item_desc_zone, KM_SLEEP | KM_NOFS);
diff --git a/fs/xfs/xfs_trans_dquot.c b/fs/xfs/xfs_trans_dquot.c
index 4d00ee6..c4ba366 100644
--- a/fs/xfs/xfs_trans_dquot.c
+++ b/fs/xfs/xfs_trans_dquot.c
@@ -649,12 +649,12 @@
* nblks.
*/
if (hardlimit > 0ULL &&
- hardlimit <= nblks + *resbcountp) {
+ hardlimit < nblks + *resbcountp) {
xfs_quota_warn(mp, dqp, QUOTA_NL_BHARDWARN);
goto error_return;
}
if (softlimit > 0ULL &&
- softlimit <= nblks + *resbcountp) {
+ softlimit < nblks + *resbcountp) {
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
@@ -677,11 +677,13 @@
if (!softlimit)
softlimit = q->qi_isoftlimit;
- if (hardlimit > 0ULL && count >= hardlimit) {
+ if (hardlimit > 0ULL &&
+ hardlimit < ninos + count) {
xfs_quota_warn(mp, dqp, QUOTA_NL_IHARDWARN);
goto error_return;
}
- if (softlimit > 0ULL && count >= softlimit) {
+ if (softlimit > 0ULL &&
+ softlimit < ninos + count) {
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
diff --git a/include/asm-generic/io-64-nonatomic-hi-lo.h b/include/asm-generic/io-64-nonatomic-hi-lo.h
new file mode 100644
index 0000000..a6806a9
--- /dev/null
+++ b/include/asm-generic/io-64-nonatomic-hi-lo.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_
+#define _ASM_IO_64_NONATOMIC_HI_LO_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ high = readl(p + 1);
+ low = readl(p);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val >> 32, addr + 4);
+ writel(val, addr);
+}
+#endif
+
+#endif /* _ASM_IO_64_NONATOMIC_HI_LO_H_ */
diff --git a/include/asm-generic/io-64-nonatomic-lo-hi.h b/include/asm-generic/io-64-nonatomic-lo-hi.h
new file mode 100644
index 0000000..ca546b1
--- /dev/null
+++ b/include/asm-generic/io-64-nonatomic-lo-hi.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_
+#define _ASM_IO_64_NONATOMIC_LO_HI_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ low = readl(p);
+ high = readl(p + 1);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val, addr);
+ writel(val >> 32, addr + 4);
+}
+#endif
+
+#endif /* _ASM_IO_64_NONATOMIC_LO_HI_H_ */
diff --git a/include/asm-generic/poll.h b/include/asm-generic/poll.h
index 44bce83..9ce7f44 100644
--- a/include/asm-generic/poll.h
+++ b/include/asm-generic/poll.h
@@ -28,6 +28,8 @@
#define POLLRDHUP 0x2000
#endif
+#define POLLFREE 0x4000 /* currently only for epoll */
+
struct pollfd {
int fd;
short events;
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 724c69c..a9fab83 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -60,6 +60,9 @@
int amba_driver_register(struct amba_driver *);
void amba_driver_unregister(struct amba_driver *);
+struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
+void amba_device_put(struct amba_device *);
+int amba_device_add(struct amba_device *, struct resource *);
int amba_device_register(struct amba_device *, struct resource *);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
@@ -89,4 +92,37 @@
#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
#define amba_part(d) AMBA_PART_BITS((d)->periphid)
+#define __AMBA_DEV(busid, data, mask) \
+ { \
+ .coherent_dma_mask = mask, \
+ .init_name = busid, \
+ .platform_data = data, \
+ }
+
+/*
+ * APB devices do not themselves have the ability to address memory,
+ * so DMA masks should be zero (much like USB peripheral devices.)
+ * The DMA controller DMA masks should be used instead (much like
+ * USB host controllers in conventional PCs.)
+ */
+#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, 0), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
+/*
+ * AHB devices are DMA capable, so set their DMA masks
+ */
+#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, ~0ULL), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .dma_mask = ~0ULL, \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
#endif
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 3c1063a..94300fe 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -56,6 +56,26 @@
}
/**
+ * rol64 - rotate a 64-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 rol64(__u64 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (64 - shift));
+}
+
+/**
+ * ror64 - rotate a 64-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 ror64(__u64 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (64 - shift));
+}
+
+/**
* rol32 - rotate a 32-bit value left
* @word: value to rotate
* @shift: bits to roll
diff --git a/include/linux/digsig.h b/include/linux/digsig.h
index b01558b..6f85a07 100644
--- a/include/linux/digsig.h
+++ b/include/linux/digsig.h
@@ -30,7 +30,7 @@
struct pubkey_hdr {
uint8_t version; /* key format version */
- time_t timestamp; /* key made, always 0 for now */
+ uint32_t timestamp; /* key made, always 0 for now */
uint8_t algo;
uint8_t nmpi;
char mpi[0];
@@ -38,7 +38,7 @@
struct signature_hdr {
uint8_t version; /* signature format version */
- time_t timestamp; /* signature made */
+ uint32_t timestamp; /* signature made */
uint8_t algo;
uint8_t hash;
uint8_t keyid[8];
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 386da09..69cd5bb 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2496,6 +2496,7 @@
extern void put_filesystem(struct file_system_type *fs);
extern struct file_system_type *get_fs_type(const char *name);
extern struct super_block *get_super(struct block_device *);
+extern struct super_block *get_super_thawed(struct block_device *);
extern struct super_block *get_active_super(struct block_device *bdev);
extern void drop_super(struct super_block *sb);
extern void iterate_supers(void (*)(struct super_block *, void *), void *);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 9f22ba5..19a41d1 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -217,6 +217,7 @@
#define MMC_CARD_SDXC (1<<6) /* card is SDXC */
#define MMC_CARD_REMOVED (1<<7) /* card has been removed */
#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
+#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
@@ -382,6 +383,7 @@
#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
@@ -393,7 +395,9 @@
#define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP)
+#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP)
/*
* Quirk add/remove for MMC products.
*/
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index e8779c6..aae5d1f 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -14,6 +14,8 @@
#ifndef LINUX_MMC_DW_MMC_H
#define LINUX_MMC_DW_MMC_H
+#include <linux/scatterlist.h>
+
#define MAX_MCI_SLOTS 2
enum dw_mci_state {
@@ -40,7 +42,7 @@
* @lock: Spinlock protecting the queue and associated data.
* @regs: Pointer to MMIO registers.
* @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @pio_offset: Offset into the current scatterlist entry.
+ * @sg_miter: PIO mapping scatterlist iterator.
* @cur_slot: The slot which is currently using the controller.
* @mrq: The request currently being processed on @cur_slot,
* or NULL if the controller is idle.
@@ -115,7 +117,7 @@
void __iomem *regs;
struct scatterlist *sg;
- unsigned int pio_offset;
+ struct sg_mapping_iter sg_miter;
struct dw_mci_slot *cur_slot;
struct mmc_request *mrq;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 0beba1e..ee2b036 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -257,6 +257,7 @@
#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */
mmc_pm_flag_t pm_caps; /* supported pm features */
unsigned int power_notify_type;
@@ -444,4 +445,23 @@
return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
}
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+ return host->ios.clock;
+}
+#endif
#endif /* LINUX_MMC_HOST_H */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index a764cef..d6ba9a1 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -614,7 +614,6 @@
size_t acl_len;
unsigned int acl_pgbase;
struct page ** acl_pages;
- struct page * acl_scratch;
struct nfs4_sequence_args seq_args;
};
@@ -624,6 +623,7 @@
size_t acl_len;
size_t acl_data_offset;
int acl_flags;
+ struct page * acl_scratch;
struct nfs4_sequence_res seq_res;
};
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 3ff4961..247399b 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -61,13 +61,16 @@
wake_up(&tsk->sighand->signalfd_wqh);
}
+extern void signalfd_cleanup(struct sighand_struct *sighand);
+
#else /* CONFIG_SIGNALFD */
static inline void signalfd_notify(struct task_struct *tsk, int sig) { }
+static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
+
#endif /* CONFIG_SIGNALFD */
#endif /* __KERNEL__ */
#endif /* _LINUX_SIGNALFD_H */
-
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 515669f..8ec1153 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -624,7 +624,7 @@
asmlinkage long sys_socketcall(int call, unsigned long __user *args);
asmlinkage long sys_listen(int, int);
asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
- long timeout);
+ int timeout);
asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timeval __user *tvp);
asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 31fdb4c..0b83acd 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -61,12 +61,6 @@
#define USB_PORT_FEAT_TEST 21
#define USB_PORT_FEAT_INDICATOR 22
#define USB_PORT_FEAT_C_PORT_L1 23
-#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
-#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
-#define USB_PORT_FEAT_BH_PORT_RESET 28
-#define USB_PORT_FEAT_C_BH_PORT_RESET 29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
/*
* Port feature selectors added by USB 3.0 spec.
@@ -75,8 +69,8 @@
#define USB_PORT_FEAT_LINK_STATE 5
#define USB_PORT_FEAT_U1_TIMEOUT 23
#define USB_PORT_FEAT_U2_TIMEOUT 24
-#define USB_PORT_FEAT_C_LINK_STATE 25
-#define USB_PORT_FEAT_C_CONFIG_ERR 26
+#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
#define USB_PORT_FEAT_BH_PORT_RESET 28
#define USB_PORT_FEAT_C_BH_PORT_RESET 29
diff --git a/kernel/fork.c b/kernel/fork.c
index b77fd55..e2cd3e2 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -66,6 +66,7 @@
#include <linux/user-return-notifier.h>
#include <linux/oom.h>
#include <linux/khugepaged.h>
+#include <linux/signalfd.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
@@ -935,8 +936,10 @@
void __cleanup_sighand(struct sighand_struct *sighand)
{
- if (atomic_dec_and_test(&sighand->count))
+ if (atomic_dec_and_test(&sighand->count)) {
+ signalfd_cleanup(sighand);
kmem_cache_free(sighand_cachep, sighand);
+ }
}
diff --git a/kernel/pid.c b/kernel/pid.c
index ce8e00d..9f08dfa 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -543,12 +543,12 @@
*/
void __init pidhash_init(void)
{
- int i, pidhash_size;
+ unsigned int i, pidhash_size;
pid_hash = alloc_large_system_hash("PID", sizeof(*pid_hash), 0, 18,
HASH_EARLY | HASH_SMALL,
&pidhash_shift, NULL, 4096);
- pidhash_size = 1 << pidhash_shift;
+ pidhash_size = 1U << pidhash_shift;
for (i = 0; i < pidhash_size; i++)
INIT_HLIST_HEAD(&pid_hash[i]);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 6728a7a..228d646 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4414,6 +4414,9 @@
*/
BUG_ON(!thresholds);
+ if (!thresholds->primary)
+ goto unlock;
+
usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
/* Check if a threshold crossed before removing */
@@ -4462,7 +4465,7 @@
/* To be sure that nobody uses thresholds */
synchronize_rcu();
-
+unlock:
mutex_unlock(&memcg->thresholds_lock);
}
diff --git a/mm/nommu.c b/mm/nommu.c
index b982290..f59e170 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -696,9 +696,11 @@
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
+ mutex_lock(&mapping->i_mmap_mutex);
flush_dcache_mmap_lock(mapping);
vma_prio_tree_insert(vma, &mapping->i_mmap);
flush_dcache_mmap_unlock(mapping);
+ mutex_unlock(&mapping->i_mmap_mutex);
}
/* add the VMA to the tree */
@@ -760,9 +762,11 @@
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
+ mutex_lock(&mapping->i_mmap_mutex);
flush_dcache_mmap_lock(mapping);
vma_prio_tree_remove(vma, &mapping->i_mmap);
flush_dcache_mmap_unlock(mapping);
+ mutex_unlock(&mapping->i_mmap_mutex);
}
/* remove from the MM's tree and list */
@@ -775,8 +779,6 @@
if (vma->vm_next)
vma->vm_next->vm_prev = vma->vm_prev;
-
- vma->vm_mm = NULL;
}
/*
@@ -2052,6 +2054,7 @@
high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
down_write(&nommu_region_sem);
+ mutex_lock(&inode->i_mapping->i_mmap_mutex);
/* search for VMAs that fall within the dead zone */
vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
@@ -2059,6 +2062,7 @@
/* found one - only interested if it's shared out of the page
* cache */
if (vma->vm_flags & VM_SHARED) {
+ mutex_unlock(&inode->i_mapping->i_mmap_mutex);
up_write(&nommu_region_sem);
return -ETXTBSY; /* not quite true, but near enough */
}
@@ -2086,6 +2090,7 @@
}
}
+ mutex_unlock(&inode->i_mapping->i_mmap_mutex);
up_write(&nommu_region_sem);
return 0;
}
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index d2186ec..a13ded1 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5236,6 +5236,7 @@
max = ((unsigned long long)nr_all_pages << PAGE_SHIFT) >> 4;
do_div(max, bucketsize);
}
+ max = min(max, 0x80000000ULL);
if (numentries > max)
numentries = max;
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 556b082..ddefc51 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -194,7 +194,7 @@
poll_napi(dev);
- if (dev->priv_flags & IFF_SLAVE) {
+ if (dev->flags & IFF_SLAVE) {
if (dev->npinfo) {
struct net_device *bond_dev = dev->master;
struct sk_buff *skb;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 37755cc..22ef5f9 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3240,7 +3240,8 @@
{
struct sk_buff *skb = NULL;
unsigned long limit;
- int i, max_share, cnt;
+ int max_share, cnt;
+ unsigned int i;
unsigned long jiffy = jiffies;
BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb));
@@ -3283,7 +3284,7 @@
&tcp_hashinfo.bhash_size,
NULL,
64 * 1024);
- tcp_hashinfo.bhash_size = 1 << tcp_hashinfo.bhash_size;
+ tcp_hashinfo.bhash_size = 1U << tcp_hashinfo.bhash_size;
for (i = 0; i < tcp_hashinfo.bhash_size; i++) {
spin_lock_init(&tcp_hashinfo.bhash[i].lock);
INIT_HLIST_HEAD(&tcp_hashinfo.bhash[i].chain);
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 976034f..53c8ce40 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1307,25 +1307,26 @@
return in_sack;
}
-static u8 tcp_sacktag_one(const struct sk_buff *skb, struct sock *sk,
- struct tcp_sacktag_state *state,
+/* Mark the given newly-SACKed range as such, adjusting counters and hints. */
+static u8 tcp_sacktag_one(struct sock *sk,
+ struct tcp_sacktag_state *state, u8 sacked,
+ u32 start_seq, u32 end_seq,
int dup_sack, int pcount)
{
struct tcp_sock *tp = tcp_sk(sk);
- u8 sacked = TCP_SKB_CB(skb)->sacked;
int fack_count = state->fack_count;
/* Account D-SACK for retransmitted packet. */
if (dup_sack && (sacked & TCPCB_RETRANS)) {
if (tp->undo_marker && tp->undo_retrans &&
- after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker))
+ after(end_seq, tp->undo_marker))
tp->undo_retrans--;
if (sacked & TCPCB_SACKED_ACKED)
state->reord = min(fack_count, state->reord);
}
/* Nothing to do; acked frame is about to be dropped (was ACKed). */
- if (!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una))
+ if (!after(end_seq, tp->snd_una))
return sacked;
if (!(sacked & TCPCB_SACKED_ACKED)) {
@@ -1344,13 +1345,13 @@
/* New sack for not retransmitted frame,
* which was in hole. It is reordering.
*/
- if (before(TCP_SKB_CB(skb)->seq,
+ if (before(start_seq,
tcp_highest_sack_seq(tp)))
state->reord = min(fack_count,
state->reord);
/* SACK enhanced F-RTO (RFC4138; Appendix B) */
- if (!after(TCP_SKB_CB(skb)->end_seq, tp->frto_highmark))
+ if (!after(end_seq, tp->frto_highmark))
state->flag |= FLAG_ONLY_ORIG_SACKED;
}
@@ -1368,8 +1369,7 @@
/* Lost marker hint past SACKed? Tweak RFC3517 cnt */
if (!tcp_is_fack(tp) && (tp->lost_skb_hint != NULL) &&
- before(TCP_SKB_CB(skb)->seq,
- TCP_SKB_CB(tp->lost_skb_hint)->seq))
+ before(start_seq, TCP_SKB_CB(tp->lost_skb_hint)->seq))
tp->lost_cnt_hint += pcount;
if (fack_count > tp->fackets_out)
@@ -1388,6 +1388,9 @@
return sacked;
}
+/* Shift newly-SACKed bytes from this skb to the immediately previous
+ * already-SACKed sk_buff. Mark the newly-SACKed bytes as such.
+ */
static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
unsigned int pcount, int shifted, int mss,
@@ -1395,10 +1398,13 @@
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
+ u32 start_seq = TCP_SKB_CB(skb)->seq; /* start of newly-SACKed */
+ u32 end_seq = start_seq + shifted; /* end of newly-SACKed */
BUG_ON(!pcount);
- if (skb == tp->lost_skb_hint)
+ /* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */
+ if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint))
tp->lost_cnt_hint += pcount;
TCP_SKB_CB(prev)->end_seq += shifted;
@@ -1424,8 +1430,11 @@
skb_shinfo(skb)->gso_type = 0;
}
- /* We discard results */
- tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
+ /* Adjust counters and hints for the newly sacked sequence range but
+ * discard the return value since prev is already marked.
+ */
+ tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
+ start_seq, end_seq, dup_sack, pcount);
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
@@ -1664,10 +1673,14 @@
break;
if (in_sack) {
- TCP_SKB_CB(skb)->sacked = tcp_sacktag_one(skb, sk,
- state,
- dup_sack,
- tcp_skb_pcount(skb));
+ TCP_SKB_CB(skb)->sacked =
+ tcp_sacktag_one(sk,
+ state,
+ TCP_SKB_CB(skb)->sacked,
+ TCP_SKB_CB(skb)->seq,
+ TCP_SKB_CB(skb)->end_seq,
+ dup_sack,
+ tcp_skb_pcount(skb));
if (!before(TCP_SKB_CB(skb)->seq,
tcp_highest_sack_seq(tp)))
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 0a0d94a..b142bd4 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -910,6 +910,8 @@
wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
result);
+ ieee80211_led_init(local);
+
rtnl_lock();
result = ieee80211_init_rate_ctrl_alg(local,
@@ -931,8 +933,6 @@
rtnl_unlock();
- ieee80211_led_init(local);
-
local->network_latency_notifier.notifier_call =
ieee80211_max_network_latency;
result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
diff --git a/net/rxrpc/ar-key.c b/net/rxrpc/ar-key.c
index 4cba13e..ae3a035 100644
--- a/net/rxrpc/ar-key.c
+++ b/net/rxrpc/ar-key.c
@@ -232,7 +232,7 @@
if (toklen <= (n_parts + 1) * 4)
return -EINVAL;
- princ->name_parts = kcalloc(sizeof(char *), n_parts, GFP_KERNEL);
+ princ->name_parts = kcalloc(n_parts, sizeof(char *), GFP_KERNEL);
if (!princ->name_parts)
return -ENOMEM;
@@ -355,7 +355,7 @@
_debug("n_elem %d", n_elem);
- td = kcalloc(sizeof(struct krb5_tagged_data), n_elem,
+ td = kcalloc(n_elem, sizeof(struct krb5_tagged_data),
GFP_KERNEL);
if (!td)
return -ENOMEM;
diff --git a/scripts/coccicheck b/scripts/coccicheck
index 3c27764..823e972 100755
--- a/scripts/coccicheck
+++ b/scripts/coccicheck
@@ -9,15 +9,10 @@
# FLAGS="-ignore_unknown_options -very_quiet"
# OPTIONS=$*
- if [ "$KBUILD_EXTMOD" = "" ] ; then
- # Workaround for Coccinelle < 0.2.3
- FLAGS="-I $srctree/include -very_quiet"
- shift $(( $# - 1 ))
- OPTIONS=$1
- else
- echo M= is not currently supported when C=1 or C=2
- exit 1
- fi
+# Workaround for Coccinelle < 0.2.3
+ FLAGS="-I $srctree/include -very_quiet"
+ shift $(( $# - 1 ))
+ OPTIONS=$1
else
ONLINE=0
FLAGS="-very_quiet"
diff --git a/scripts/depmod.sh b/scripts/depmod.sh
index a272356..2ae4817 100755
--- a/scripts/depmod.sh
+++ b/scripts/depmod.sh
@@ -9,12 +9,6 @@
DEPMOD=$1
KERNELRELEASE=$2
-if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then
- echo "Warning: you may need to install module-init-tools" >&2
- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2
- sleep 1
-fi
-
if ! test -r System.map -a -x "$DEPMOD"; then
exit 0
fi
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 2bd594e..9adb667 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1494,6 +1494,13 @@
return 0;
}
+#ifndef R_ARM_CALL
+#define R_ARM_CALL 28
+#endif
+#ifndef R_ARM_JUMP24
+#define R_ARM_JUMP24 29
+#endif
+
static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
{
unsigned int r_typ = ELF_R_TYPE(r->r_info);
@@ -1505,6 +1512,8 @@
(elf->symtab_start + ELF_R_SYM(r->r_info));
break;
case R_ARM_PC24:
+ case R_ARM_CALL:
+ case R_ARM_JUMP24:
/* From ARM ABI: ((S + A) | T) - P */
r->r_addend = (int)(long)(elf->hdr +
sechdr->sh_offset +
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index f6cbc3d..3c6c0b1 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -238,14 +238,14 @@
fi
# Build header package
-(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$)
-(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> /tmp/files$$)
-(cd $objtree; find .config Module.symvers include scripts -type f >> /tmp/objfiles$$)
+(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > "$objtree/debian/hdrsrcfiles")
+(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> "$objtree/debian/hdrsrcfiles")
+(cd $objtree; find .config Module.symvers include scripts -type f >> "$objtree/debian/hdrobjfiles")
destdir=$kernel_headers_dir/usr/src/linux-headers-$version
mkdir -p "$destdir"
-(cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -)
-(cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -)
-rm -f /tmp/files$$ /tmp/objfiles$$
+(cd $srctree; tar -c -f - -T "$objtree/debian/hdrsrcfiles") | (cd $destdir; tar -xf -)
+(cd $objtree; tar -c -f - -T "$objtree/debian/hdrobjfiles") | (cd $destdir; tar -xf -)
+rm -f "$objtree/debian/hdrsrcfiles" "$objtree/debian/hdrobjfiles"
arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 1358987..3647baa 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -80,6 +80,8 @@
ALC_AUTOMUTE_MIXER, /* mute/unmute mixer widget AMP */
};
+#define MAX_VOL_NIDS 0x40
+
struct alc_spec {
/* codec parameterization */
const struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
@@ -118,8 +120,8 @@
const hda_nid_t *capsrc_nids;
hda_nid_t dig_in_nid; /* digital-in NID; optional */
hda_nid_t mixer_nid; /* analog-mixer NID */
- DECLARE_BITMAP(vol_ctls, 0x20 << 1);
- DECLARE_BITMAP(sw_ctls, 0x20 << 1);
+ DECLARE_BITMAP(vol_ctls, MAX_VOL_NIDS << 1);
+ DECLARE_BITMAP(sw_ctls, MAX_VOL_NIDS << 1);
/* capture setup for dynamic dual-adc switch */
hda_nid_t cur_adc;
@@ -3149,7 +3151,10 @@
static inline unsigned int get_ctl_pos(unsigned int data)
{
hda_nid_t nid = get_amp_nid_(data);
- unsigned int dir = get_amp_direction_(data);
+ unsigned int dir;
+ if (snd_BUG_ON(nid >= MAX_VOL_NIDS))
+ return 0;
+ dir = get_amp_direction_(data);
return (nid << 1) | dir;
}
@@ -4436,12 +4441,20 @@
const struct alc_fixup *fix, int action)
{
if (action == ALC_FIXUP_ACT_PRE_PROBE) {
+ /* fake the connections during parsing the tree */
hda_nid_t conn1[2] = { 0x0c, 0x0d };
hda_nid_t conn2[2] = { 0x0e, 0x0f };
snd_hda_override_conn_list(codec, 0x14, 2, conn1);
snd_hda_override_conn_list(codec, 0x15, 2, conn1);
snd_hda_override_conn_list(codec, 0x18, 2, conn2);
snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
+ } else if (action == ALC_FIXUP_ACT_PROBE) {
+ /* restore the connections */
+ hda_nid_t conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 };
+ snd_hda_override_conn_list(codec, 0x14, 5, conn);
+ snd_hda_override_conn_list(codec, 0x15, 5, conn);
+ snd_hda_override_conn_list(codec, 0x18, 5, conn);
+ snd_hda_override_conn_list(codec, 0x1a, 5, conn);
}
}
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
index 5ef70b5..278c0a0 100644
--- a/sound/soc/codecs/ak4642.c
+++ b/sound/soc/codecs/ak4642.c
@@ -146,13 +146,10 @@
SOC_DOUBLE_R_TLV("Digital Playback Volume", L_DVC, R_DVC,
0, 0xFF, 1, out_tlv),
-
- SOC_SINGLE("Headphone Switch", PW_MGMT2, 6, 1, 0),
};
-static const struct snd_kcontrol_new ak4642_hpout_mixer_controls[] = {
- SOC_DAPM_SINGLE("DACH", MD_CTL4, 0, 1, 0),
-};
+static const struct snd_kcontrol_new ak4642_headphone_control =
+ SOC_DAPM_SINGLE("Switch", PW_MGMT2, 6, 1, 0);
static const struct snd_kcontrol_new ak4642_lout_mixer_controls[] = {
SOC_DAPM_SINGLE("DACL", SG_SL1, 4, 1, 0),
@@ -165,13 +162,12 @@
SND_SOC_DAPM_OUTPUT("HPOUTR"),
SND_SOC_DAPM_OUTPUT("LINEOUT"),
- SND_SOC_DAPM_MIXER("HPOUTL Mixer", PW_MGMT2, 5, 0,
- &ak4642_hpout_mixer_controls[0],
- ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+ SND_SOC_DAPM_PGA("HPL Out", PW_MGMT2, 5, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("HPR Out", PW_MGMT2, 4, 0, NULL, 0),
+ SND_SOC_DAPM_SWITCH("Headphone Enable", SND_SOC_NOPM, 0, 0,
+ &ak4642_headphone_control),
- SND_SOC_DAPM_MIXER("HPOUTR Mixer", PW_MGMT2, 4, 0,
- &ak4642_hpout_mixer_controls[0],
- ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+ SND_SOC_DAPM_PGA("DACH", MD_CTL4, 0, 0, NULL, 0),
SND_SOC_DAPM_MIXER("LINEOUT Mixer", PW_MGMT1, 3, 0,
&ak4642_lout_mixer_controls[0],
@@ -184,12 +180,17 @@
static const struct snd_soc_dapm_route ak4642_intercon[] = {
/* Outputs */
- {"HPOUTL", NULL, "HPOUTL Mixer"},
- {"HPOUTR", NULL, "HPOUTR Mixer"},
+ {"HPOUTL", NULL, "HPL Out"},
+ {"HPOUTR", NULL, "HPR Out"},
{"LINEOUT", NULL, "LINEOUT Mixer"},
- {"HPOUTL Mixer", "DACH", "DAC"},
- {"HPOUTR Mixer", "DACH", "DAC"},
+ {"HPL Out", NULL, "Headphone Enable"},
+ {"HPR Out", NULL, "Headphone Enable"},
+
+ {"Headphone Enable", "Switch", "DACH"},
+
+ {"DACH", NULL, "DAC"},
+
{"LINEOUT Mixer", "DACL", "DAC"},
};
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 29c4b02..0ac228b 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2564,7 +2564,7 @@
return 0;
}
-static const char *st_text[] = { "None", "Right", "Left" };
+static const char *st_text[] = { "None", "Left", "Right" };
static const struct soc_enum str_enum =
SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_1, 2, 3, st_text);
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 2cf87f5..fde9a7a 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -311,8 +311,10 @@
spin_lock(&dev->spinlock);
- if (dev->input_panic || dev->output_panic)
+ if (dev->input_panic || dev->output_panic) {
ptr = SNDRV_PCM_POS_XRUN;
+ goto unlock;
+ }
if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
ptr = bytes_to_frames(sub->runtime,
@@ -321,6 +323,7 @@
ptr = bytes_to_frames(sub->runtime,
dev->audio_in_buf_pos[index]);
+unlock:
spin_unlock(&dev->spinlock);
return ptr;
}
diff --git a/sound/usb/card.h b/sound/usb/card.h
index a39edcc..da5fa1a 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -1,6 +1,7 @@
#ifndef __USBAUDIO_CARD_H
#define __USBAUDIO_CARD_H
+#define MAX_NR_RATES 1024
#define MAX_PACKS 20
#define MAX_PACKS_HS (MAX_PACKS * 8) /* in high speed mode */
#define MAX_URBS 8
diff --git a/sound/usb/format.c b/sound/usb/format.c
index e09aba1..ddfef57 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -209,8 +209,6 @@
return 0;
}
-#define MAX_UAC2_NR_RATES 1024
-
/*
* Helper function to walk the array of sample rate triplets reported by
* the device. The problem is that we need to parse whole array first to
@@ -255,7 +253,7 @@
fp->rates |= snd_pcm_rate_to_rate_bit(rate);
nr_rates++;
- if (nr_rates >= MAX_UAC2_NR_RATES) {
+ if (nr_rates >= MAX_NR_RATES) {
snd_printk(KERN_ERR "invalid uac2 rates\n");
break;
}
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index a3ddac0..2781726 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -132,10 +132,14 @@
unsigned *rate_table = NULL;
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
- if (! fp) {
+ if (!fp) {
snd_printk(KERN_ERR "cannot memdup\n");
return -ENOMEM;
}
+ if (fp->nr_rates > MAX_NR_RATES) {
+ kfree(fp);
+ return -EINVAL;
+ }
if (fp->nr_rates > 0) {
rate_table = kmemdup(fp->rate_table,
sizeof(int) * fp->nr_rates, GFP_KERNEL);
