diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 831f540..eac3838 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1749,8 +1749,8 @@
 __ndelay:
 	save	%sp, -STACKFRAME_SZ, %sp
 	mov	%i0, %o0
-	call	.umul
-	 mov	0x1ad, %o1		! 2**32 / (1 000 000 000 / HZ)
+	call	.umul			! round multiplier up so large ns ok
+	 mov	0x1ae, %o1		! 2**32 / (1 000 000 000 / HZ)
 	call	.umul
 	 mov	%i1, %o1		! udelay_val
 	ba	delay_continue
@@ -1760,11 +1760,17 @@
 __udelay:
 	save	%sp, -STACKFRAME_SZ, %sp
 	mov	%i0, %o0
-	sethi	%hi(0x10c6), %o1
+	sethi	%hi(0x10c7), %o1	! round multiplier up so large us ok
 	call	.umul
-	 or	%o1, %lo(0x10c6), %o1	! 2**32 / 1 000 000
+	 or	%o1, %lo(0x10c7), %o1	! 2**32 / 1 000 000
 	call	.umul
 	 mov	%i1, %o1		! udelay_val
+	sethi	%hi(0x028f4b62), %l0	! Add in rounding constant * 2**32,
+	or	%g0, %lo(0x028f4b62), %l0
+	addcc	%o0, %l0, %o0		! 2**32 * 0.009 999
+	bcs,a	3f
+	 add	%o1, 0x01, %o1
+3:
 	call	.umul
 	 mov	HZ, %o0			! >>32 earlier for wider range
 
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index f257a67..75b2240 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -47,6 +47,8 @@
 #include <asm/cacheflush.h>
 #include <asm/irq_regs.h>
 
+#include "irq.h"
+
 #ifdef CONFIG_SMP
 #define SMP_NOP2 "nop; nop;\n\t"
 #define SMP_NOP3 "nop; nop; nop;\n\t"
@@ -268,7 +270,7 @@
 	kfree(action);
 
 	if (!sparc_irq[cpu_irq].action)
-		disable_irq(irq);
+		__disable_irq(irq);
 
 out_unlock:
 	spin_unlock_irqrestore(&irq_action_lock, flags);
@@ -464,7 +466,7 @@
 
 	sparc_irq[cpu_irq].action = action;
 
-	enable_irq(irq);
+	__enable_irq(irq);
 
 	ret = 0;
 out_unlock:
@@ -544,7 +546,7 @@
 
 	*actionp = action;
 
-	enable_irq(irq);
+	__enable_irq(irq);
 
 	ret = 0;
 out_unlock:
@@ -555,6 +557,25 @@
 
 EXPORT_SYMBOL(request_irq);
 
+void disable_irq_nosync(unsigned int irq)
+{
+	return __disable_irq(irq);
+}
+EXPORT_SYMBOL(disable_irq_nosync);
+
+void disable_irq(unsigned int irq)
+{
+	return __disable_irq(irq);
+}
+EXPORT_SYMBOL(disable_irq);
+
+void enable_irq(unsigned int irq)
+{
+	return __enable_irq(irq);
+}
+
+EXPORT_SYMBOL(enable_irq);
+
 /* We really don't need these at all on the Sparc.  We only have
  * stubs here because they are exported to modules.
  */
diff --git a/arch/sparc/kernel/irq.h b/arch/sparc/kernel/irq.h
new file mode 100644
index 0000000..32ef3eb
--- /dev/null
+++ b/arch/sparc/kernel/irq.h
@@ -0,0 +1,68 @@
+#include <asm/btfixup.h>
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * changed these to function pointers.. it saves cycles and will allow
+ * the irq dependencies to be split into different files at a later date
+ * sun4c_irq.c, sun4m_irq.c etc so we could reduce the kernel size.
+ * Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Changed these to btfixup entities... It saves cycles :)
+ */
+
+BTFIXUPDEF_CALL(void, disable_irq, unsigned int)
+BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
+BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, clear_clock_irq, void)
+BTFIXUPDEF_CALL(void, clear_profile_irq, int)
+BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
+
+static inline void __disable_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(disable_irq)(irq);
+}
+
+static inline void __enable_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(enable_irq)(irq);
+}
+
+static inline void disable_pil_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(disable_pil_irq)(irq);
+}
+
+static inline void enable_pil_irq(unsigned int irq)
+{
+	BTFIXUP_CALL(enable_pil_irq)(irq);
+}
+
+static inline void clear_clock_irq(void)
+{
+	BTFIXUP_CALL(clear_clock_irq)();
+}
+
+static inline void clear_profile_irq(int irq)
+{
+	BTFIXUP_CALL(clear_profile_irq)(irq);
+}
+
+static inline void load_profile_irq(int cpu, int limit)
+{
+	BTFIXUP_CALL(load_profile_irq)(cpu, limit);
+}
+
+extern void (*sparc_init_timers)(irq_handler_t lvl10_irq);
+
+extern void claim_ticker14(irq_handler_t irq_handler,
+			   int irq,
+			   unsigned int timeout);
+
+#ifdef CONFIG_SMP
+BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, set_irq_udt, int)
+
+#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
+#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
+#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
+#endif
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 7917711..f2eae45 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -36,6 +36,7 @@
 #include <asm/uaccess.h>
 #include <asm/irq_regs.h>
 
+#include "irq.h"
 
 /*
  * I studied different documents and many live PROMs both from 2.30
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index 4fea3ac..6724ab9 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -33,6 +33,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cpudata.h>
 
+#include "irq.h"
+
 int smp_num_cpus = 1;
 volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
 unsigned char boot_cpu_id = 0;
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index d8e008a..55bac51 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -154,8 +154,6 @@
 #else
 EXPORT_SYMBOL(BTFIXUP_CALL(__hard_smp_processor_id));
 #endif
-EXPORT_SYMBOL(BTFIXUP_CALL(enable_irq));
-EXPORT_SYMBOL(BTFIXUP_CALL(disable_irq));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_unlockarea));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_lockarea));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_get_scsi_sgl));
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index 009e891..c6ac9fc 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include "irq.h"
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
@@ -40,6 +41,20 @@
 static struct resource sun4c_intr_eb = { "sun4c_intr" };
 #endif
 
+/*
+ * Bit field defines for the interrupt registers on various
+ * Sparc machines.
+ */
+
+/* The sun4c interrupt register. */
+#define SUN4C_INT_ENABLE  0x01     /* Allow interrupts. */
+#define SUN4C_INT_E14     0x80     /* Enable level 14 IRQ. */
+#define SUN4C_INT_E10     0x20     /* Enable level 10 IRQ. */
+#define SUN4C_INT_E8      0x10     /* Enable level 8 IRQ. */
+#define SUN4C_INT_E6      0x08     /* Enable level 6 IRQ. */
+#define SUN4C_INT_E4      0x04     /* Enable level 4 IRQ. */
+#define SUN4C_INT_E1      0x02     /* Enable level 1 IRQ. */
+
 /* Pointer to the interrupt enable byte
  *
  * Dave Redman (djhr@tadpole.co.uk)
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 396797e..e0efab2 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -39,6 +39,8 @@
 #include <asm/cacheflush.h>
 #include <asm/irq_regs.h>
 
+#include "irq.h"
+
 /* If you trust current SCSI layer to handle different SCSI IRQs, enable this. I don't trust it... -jj */
 /* #define DISTRIBUTE_IRQS */
 
@@ -188,7 +190,7 @@
 	kfree(action);
 
 	if (!(*actionp))
-		disable_irq(irq);
+		__disable_irq(irq);
 
 out_unlock:
 	spin_unlock_irqrestore(&irq_action_lock, flags);
@@ -346,7 +348,7 @@
 	else
 		*actionp = action;
 		
-	enable_irq(irq);
+	__enable_irq(irq);
 
 	ret = 0;
 out_unlock:
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 098c94f..89a6de9 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -36,6 +36,7 @@
 #include <asm/cacheflush.h>
 #include <asm/cpudata.h>
 
+#include "irq.h"
 #define IRQ_CROSS_CALL		15
 
 extern ctxd_t *srmmu_ctx_table_phys;
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 91a803e..b92d6d2 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -38,11 +38,85 @@
 #include <asm/sbus.h>
 #include <asm/cacheflush.h>
 
+#include "irq.h"
+
+/* On the sun4m, just like the timers, we have both per-cpu and master
+ * interrupt registers.
+ */
+
+/* These registers are used for sending/receiving irqs from/to
+ * different cpu's.
+ */
+struct sun4m_intreg_percpu {
+	unsigned int tbt;        /* Interrupts still pending for this cpu. */
+
+	/* These next two registers are WRITE-ONLY and are only
+	 * "on bit" sensitive, "off bits" written have NO affect.
+	 */
+	unsigned int clear;  /* Clear this cpus irqs here. */
+	unsigned int set;    /* Set this cpus irqs here. */
+	unsigned char space[PAGE_SIZE - 12];
+};
+
+/*
+ * djhr
+ * Actually the clear and set fields in this struct are misleading..
+ * according to the SLAVIO manual (and the same applies for the SEC)
+ * the clear field clears bits in the mask which will ENABLE that IRQ
+ * the set field sets bits in the mask to DISABLE the IRQ.
+ *
+ * Also the undirected_xx address in the SLAVIO is defined as
+ * RESERVED and write only..
+ *
+ * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
+ *             sun4m machines, for MP the layout makes more sense.
+ */
+struct sun4m_intregs {
+	struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
+	unsigned int tbt;                /* IRQ's that are still pending. */
+	unsigned int irqs;               /* Master IRQ bits. */
+
+	/* Again, like the above, two these registers are WRITE-ONLY. */
+	unsigned int clear;              /* Clear master IRQ's by setting bits here. */
+	unsigned int set;                /* Set master IRQ's by setting bits here. */
+
+	/* This register is both READ and WRITE. */
+	unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
+};
+
 static unsigned long dummy;
 
 struct sun4m_intregs *sun4m_interrupts;
 unsigned long *irq_rcvreg = &dummy;
 
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE  	0x80000000
+#define SUN4M_INT_E14     	0x00000080
+#define SUN4M_INT_E10     	0x00080000
+
+#define SUN4M_HARD_INT(x)	(0x000000001 << (x))
+#define SUN4M_SOFT_INT(x)	(0x000010000 << (x))
+
+#define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
+#define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
+#define	SUN4M_INT_M2S_WRITE	0x20000000	  /* write buffer error */
+#define	SUN4M_INT_ECC		0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
+#define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
+#define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
+#define	SUN4M_INT_REALTIME	0x00080000	  /* system timer */
+#define	SUN4M_INT_SCSI		0x00040000	  /* onboard scsi */
+#define	SUN4M_INT_AUDIO		0x00020000	  /* audio/isdn */
+#define	SUN4M_INT_ETHERNET	0x00010000	  /* onboard ethernet */
+#define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
+#define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
+#define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
+
+#define SUN4M_INT_SBUS(x)	(1 << (x+7))
+#define SUN4M_INT_VME(x)	(1 << (x))
+
 /* These tables only apply for interrupts greater than 15..
  * 
  * any intr value below 0x10 is considered to be a soft-int
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 63ed19b..730eb57 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -31,6 +31,8 @@
 #include <asm/oplib.h>
 #include <asm/cpudata.h>
 
+#include "irq.h"
+
 #define IRQ_RESCHEDULE		13
 #define IRQ_STOP_CPU		14
 #define IRQ_CROSS_CALL		15
diff --git a/arch/sparc/kernel/tick14.c b/arch/sparc/kernel/tick14.c
index f1a7bd1..707bfda 100644
--- a/arch/sparc/kernel/tick14.c
+++ b/arch/sparc/kernel/tick14.c
@@ -25,6 +25,8 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 
+#include "irq.h"
+
 extern unsigned long lvl14_save[5];
 static unsigned long *linux_lvl14 = NULL;
 static unsigned long obp_lvl14[4];
@@ -62,7 +64,7 @@
 
 	/* first we copy the obp handler instructions
 	 */
-	disable_irq(irq_nr);
+	__disable_irq(irq_nr);
 	if (!handler)
 		return;
     
@@ -79,6 +81,6 @@
 			 NULL)) {
 		install_linux_ticker();
 		load_profile_irq(cpu, timeout);
-		enable_irq(irq_nr);
+		__enable_irq(irq_nr);
 	}
 }
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index f2fdbb3..6a25133 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -44,6 +44,8 @@
 #include <asm/of_device.h>
 #include <asm/irq_regs.h>
 
+#include "irq.h"
+
 DEFINE_SPINLOCK(rtc_lock);
 enum sparc_clock_type sp_clock_typ;
 DEFINE_SPINLOCK(mostek_lock);
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index a532922..a1bef07 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -308,6 +308,9 @@
 extern void srmmu_paging_init(void);
 extern void device_scan(void);
 
+pgprot_t PAGE_SHARED __read_mostly;
+EXPORT_SYMBOL(PAGE_SHARED);
+
 void __init paging_init(void)
 {
 	switch(sparc_cpu_model) {
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index ca26232..17b485f 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -2154,7 +2154,7 @@
 	BTFIXUPSET_SIMM13(ptrs_per_pgd, SRMMU_PTRS_PER_PGD);
 
 	BTFIXUPSET_INT(page_none, pgprot_val(SRMMU_PAGE_NONE));
-	BTFIXUPSET_INT(page_shared, pgprot_val(SRMMU_PAGE_SHARED));
+	PAGE_SHARED = pgprot_val(SRMMU_PAGE_SHARED);
 	BTFIXUPSET_INT(page_copy, pgprot_val(SRMMU_PAGE_COPY));
 	BTFIXUPSET_INT(page_readonly, pgprot_val(SRMMU_PAGE_RDONLY));
 	BTFIXUPSET_INT(page_kernel, pgprot_val(SRMMU_PAGE_KERNEL));
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index bdd835f..a57a366 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2155,7 +2155,7 @@
 	BTFIXUPSET_SIMM13(user_ptrs_per_pgd, KERNBASE / SUN4C_PGDIR_SIZE);
 
 	BTFIXUPSET_INT(page_none, pgprot_val(SUN4C_PAGE_NONE));
-	BTFIXUPSET_INT(page_shared, pgprot_val(SUN4C_PAGE_SHARED));
+	PAGE_SHARED = pgprot_val(SUN4C_PAGE_SHARED);
 	BTFIXUPSET_INT(page_copy, pgprot_val(SUN4C_PAGE_COPY));
 	BTFIXUPSET_INT(page_readonly, pgprot_val(SUN4C_PAGE_READONLY));
 	BTFIXUPSET_INT(page_kernel, pgprot_val(SUN4C_PAGE_KERNEL));
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 7d36531..d270c2f 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -280,6 +280,7 @@
 EXPORT_SYMBOL(svr4_getcontext);
 EXPORT_SYMBOL(svr4_setcontext);
 EXPORT_SYMBOL(compat_sys_ioctl);
+EXPORT_SYMBOL(sys_ioctl);
 EXPORT_SYMBOL(sparc32_open);
 #endif
 
diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h
index ff520ea..afb88a5 100644
--- a/include/asm-sparc/irq.h
+++ b/include/asm-sparc/irq.h
@@ -7,178 +7,16 @@
 #ifndef _SPARC_IRQ_H
 #define _SPARC_IRQ_H
 
-#include <linux/linkage.h>
-#include <linux/threads.h>     /* For NR_CPUS */
 #include <linux/interrupt.h>
 
-#include <asm/system.h>     /* For SUN4M_NCPUS */
-#include <asm/btfixup.h>
-
-#define __irq_ino(irq) irq
-#define __irq_pil(irq) irq
-
 #define NR_IRQS    16
 
 #define irq_canonicalize(irq)	(irq)
 
-/* Dave Redman (djhr@tadpole.co.uk)
- * changed these to function pointers.. it saves cycles and will allow
- * the irq dependencies to be split into different files at a later date
- * sun4c_irq.c, sun4m_irq.c etc so we could reduce the kernel size.
- * Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Changed these to btfixup entities... It saves cycles :)
- */
-BTFIXUPDEF_CALL(void, disable_irq, unsigned int)
-BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
-BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
-BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
-BTFIXUPDEF_CALL(void, clear_clock_irq, void)
-BTFIXUPDEF_CALL(void, clear_profile_irq, int)
-BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
-
-static inline void disable_irq_nosync(unsigned int irq)
-{
-	BTFIXUP_CALL(disable_irq)(irq);
-}
-
-static inline void disable_irq(unsigned int irq)
-{
-	BTFIXUP_CALL(disable_irq)(irq);
-}
-
-static inline void enable_irq(unsigned int irq)
-{
-	BTFIXUP_CALL(enable_irq)(irq);
-}
-
-static inline void disable_pil_irq(unsigned int irq)
-{
-	BTFIXUP_CALL(disable_pil_irq)(irq);
-}
-
-static inline void enable_pil_irq(unsigned int irq)
-{
-	BTFIXUP_CALL(enable_pil_irq)(irq);
-}
-
-static inline void clear_clock_irq(void)
-{
-	BTFIXUP_CALL(clear_clock_irq)();
-}
-
-static inline void clear_profile_irq(int irq)
-{
-	BTFIXUP_CALL(clear_profile_irq)(irq);
-}
-
-static inline void load_profile_irq(int cpu, int limit)
-{
-	BTFIXUP_CALL(load_profile_irq)(cpu, limit);
-}
-
-extern void (*sparc_init_timers)(irq_handler_t lvl10_irq);
-extern void claim_ticker14(irq_handler_t irq_handler,
-			   int irq,
-			   unsigned int timeout);
-
-#ifdef CONFIG_SMP
-BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
-BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
-BTFIXUPDEF_CALL(void, set_irq_udt, int)
-
-#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
-#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
-#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
-#endif
+extern void disable_irq_nosync(unsigned int irq);
+extern void disable_irq(unsigned int irq);
+extern void enable_irq(unsigned int irq);
 
 extern int request_fast_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, __const__ char *devname);
 
-/* On the sun4m, just like the timers, we have both per-cpu and master
- * interrupt registers.
- */
-
-/* These registers are used for sending/receiving irqs from/to
- * different cpu's.
- */
-struct sun4m_intreg_percpu {
-	unsigned int tbt;        /* Interrupts still pending for this cpu. */
-
-	/* These next two registers are WRITE-ONLY and are only
-	 * "on bit" sensitive, "off bits" written have NO affect.
-	 */
-	unsigned int clear;  /* Clear this cpus irqs here. */
-	unsigned int set;    /* Set this cpus irqs here. */
-	unsigned char space[PAGE_SIZE - 12];
-};
-
-/*
- * djhr
- * Actually the clear and set fields in this struct are misleading..
- * according to the SLAVIO manual (and the same applies for the SEC)
- * the clear field clears bits in the mask which will ENABLE that IRQ
- * the set field sets bits in the mask to DISABLE the IRQ.
- *
- * Also the undirected_xx address in the SLAVIO is defined as
- * RESERVED and write only..
- *
- * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
- *             sun4m machines, for MP the layout makes more sense.
- */
-struct sun4m_intregs {
-	struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
-	unsigned int tbt;                /* IRQ's that are still pending. */
-	unsigned int irqs;               /* Master IRQ bits. */
-
-	/* Again, like the above, two these registers are WRITE-ONLY. */
-	unsigned int clear;              /* Clear master IRQ's by setting bits here. */
-	unsigned int set;                /* Set master IRQ's by setting bits here. */
-
-	/* This register is both READ and WRITE. */
-	unsigned int undirected_target;  /* Which cpu gets undirected irqs. */
-};
-
-extern struct sun4m_intregs *sun4m_interrupts;
-
-/* 
- * Bit field defines for the interrupt registers on various
- * Sparc machines.
- */
-
-/* The sun4c interrupt register. */
-#define SUN4C_INT_ENABLE  0x01     /* Allow interrupts. */
-#define SUN4C_INT_E14     0x80     /* Enable level 14 IRQ. */
-#define SUN4C_INT_E10     0x20     /* Enable level 10 IRQ. */
-#define SUN4C_INT_E8      0x10     /* Enable level 8 IRQ. */
-#define SUN4C_INT_E6      0x08     /* Enable level 6 IRQ. */
-#define SUN4C_INT_E4      0x04     /* Enable level 4 IRQ. */
-#define SUN4C_INT_E1      0x02     /* Enable level 1 IRQ. */
-
-/* Dave Redman (djhr@tadpole.co.uk)
- * The sun4m interrupt registers.
- */
-#define SUN4M_INT_ENABLE  	0x80000000
-#define SUN4M_INT_E14     	0x00000080
-#define SUN4M_INT_E10     	0x00080000
-
-#define SUN4M_HARD_INT(x)	(0x000000001 << (x))
-#define SUN4M_SOFT_INT(x)	(0x000010000 << (x))
-
-#define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
-#define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
-#define	SUN4M_INT_M2S_WRITE	0x20000000	  /* write buffer error */
-#define	SUN4M_INT_ECC		0x10000000	  /* ecc memory error */
-#define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
-#define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
-#define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
-#define	SUN4M_INT_REALTIME	0x00080000	  /* system timer */
-#define	SUN4M_INT_SCSI		0x00040000	  /* onboard scsi */
-#define	SUN4M_INT_AUDIO		0x00020000	  /* audio/isdn */
-#define	SUN4M_INT_ETHERNET	0x00010000	  /* onboard ethernet */
-#define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
-#define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
-#define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
-
-#define SUN4M_INT_SBUS(x)	(1 << (x+7))
-#define SUN4M_INT_VME(x)	(1 << (x))
-
 #endif
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
index a55f4c3..2cc235b 100644
--- a/include/asm-sparc/pgtable.h
+++ b/include/asm-sparc/pgtable.h
@@ -46,7 +46,6 @@
 #define pgd_ERROR(e)   __builtin_trap()
 
 BTFIXUPDEF_INT(page_none)
-BTFIXUPDEF_INT(page_shared)
 BTFIXUPDEF_INT(page_copy)
 BTFIXUPDEF_INT(page_readonly)
 BTFIXUPDEF_INT(page_kernel)
@@ -66,7 +65,7 @@
 #define PTE_SIZE		(PTRS_PER_PTE*4)
 
 #define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
-#define PAGE_SHARED    __pgprot(BTFIXUP_INT(page_shared))
+extern pgprot_t PAGE_SHARED;
 #define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
 #define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))