vga_switcheroo: initial implementation (v15)

Many new laptops now come with 2 gpus, one to be used for low power
modes and one for gaming/on-ac applications. These GPUs are typically
wired to the laptop panel and VGA ports via a multiplexer unit which
is controlled via ACPI methods.

4 combinations of systems typically exist - with 2 ACPI methods.
Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method
ATI/ATI - some ASUS - use ATPX ACPI Method
Intel/Nvidia - - use _DSM ACPI method
Nvidia/Nvidia -  - use _DSM ACPI method.

TODO:
This patch adds support for the ATPX method and initial bits
for the _DSM methods that need to written by someone with
access to the hardware.
Add a proper non-debugfs interface - need to get some proper
testing first.

v2: add power up/down support for both devices
on W500 puts i915/radeon into D3 and cuts power to radeon.

v3: redo probing methods, no DMI list, drm devices call to
register with switcheroo, it tries to find an ATPX method on
any device and once there is two devices + ATPX it inits the
switcher.

v4: ATPX msg handling using buffers - should work on more machines

v5: rearchitect after more mjg59 discussion - move ATPX handling to
    radeon driver.

v6: add file headers + initial nouveau bits (to be filled out).

v7: merge delayed switcher code.

v8: avoid suspend/resume of gpu that is off

v9: rearchitect - mjg59 is always right. - move all ATPX code to
radeon, should allow simpler DSM also proper ATRM handling

v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv

v11: fix bug in resuming Intel for 2nd time.

v12: start fixing up nvidia code blindly.

v13: blindly guess at finishing nvidia code

v14: remove radeon audio hacks - fix up intel resume more like upstream

v15: clean up printks + remove unnecessary igd/dis pointers

mount debugfs

/sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected
 + 2 cards.

DIS - immediate change to discrete
IGD - immediate change to IGD
DDIS - delayed change to discrete
DIGD - delayed change to IGD
ON - turn on not in use
OFF - turn off not in use

Tested on W500 (Intel/ATI) and T500 (Intel/ATI)

Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index c0356bb..a5dfb15 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -118,6 +118,10 @@
 /*
  * BIOS.
  */
+#define ATRM_BIOS_PAGE 4096
+
+bool radeon_atrm_supported(struct pci_dev *pdev);
+int radeon_atrm_get_bios_chunk(uint8_t *bios, int offset, int len);
 bool radeon_get_bios(struct radeon_device *rdev);
 
 
@@ -838,6 +842,8 @@
 	int			audio_bits_per_sample;
 	uint8_t			audio_status_bits;
 	uint8_t			audio_category_code;
+
+	bool powered_down;
 };
 
 int radeon_device_init(struct radeon_device *rdev,
@@ -1042,6 +1048,8 @@
 extern void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
 extern void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain);
 extern bool radeon_ttm_bo_is_radeon_bo(struct ttm_buffer_object *bo);
+extern int radeon_resume_kms(struct drm_device *dev);
+extern int radeon_suspend_kms(struct drm_device *dev, pm_message_t state);
 
 /* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280 */
 struct r100_mc_save {