mfd: PCF50633 gpio support
What the PCF05633 calls as a 'GPIO' is much more than the GPIO in the linux
sense and there are only 4 of them - which means, the gpiolib is not used
here.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2fa3504..06a2b0f 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -233,6 +233,13 @@
Say yes here if you want to include support for ADC in the
NXP PCF50633 chip.
+config PCF50633_GPIO
+ tristate "Support for NXP PCF50633 GPIO"
+ depends on MFD_PCF50633
+ help
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
+
endmenu
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 138f9c4..3afb519 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -39,4 +39,5 @@
obj-$(CONFIG_PMIC_DA903X) += da903x.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
-obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
\ No newline at end of file
+obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
+obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
\ No newline at end of file
diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
new file mode 100644
index 0000000..2fa2eca
--- /dev/null
+++ b/drivers/mfd/pcf50633-gpio.c
@@ -0,0 +1,118 @@
+/* NXP PCF50633 GPIO Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+enum pcf50633_regulator_id {
+ PCF50633_REGULATOR_AUTO,
+ PCF50633_REGULATOR_DOWN1,
+ PCF50633_REGULATOR_DOWN2,
+ PCF50633_REGULATOR_LDO1,
+ PCF50633_REGULATOR_LDO2,
+ PCF50633_REGULATOR_LDO3,
+ PCF50633_REGULATOR_LDO4,
+ PCF50633_REGULATOR_LDO5,
+ PCF50633_REGULATOR_LDO6,
+ PCF50633_REGULATOR_HCLDO,
+ PCF50633_REGULATOR_MEMLDO,
+};
+
+#define PCF50633_REG_AUTOOUT 0x1a
+#define PCF50633_REG_DOWN1OUT 0x1e
+#define PCF50633_REG_DOWN2OUT 0x22
+#define PCF50633_REG_MEMLDOOUT 0x26
+#define PCF50633_REG_LDO1OUT 0x2d
+#define PCF50633_REG_LDO2OUT 0x2f
+#define PCF50633_REG_LDO3OUT 0x31
+#define PCF50633_REG_LDO4OUT 0x33
+#define PCF50633_REG_LDO5OUT 0x35
+#define PCF50633_REG_LDO6OUT 0x37
+#define PCF50633_REG_HCLDOOUT 0x39
+
+static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
+ [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT,
+ [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT,
+ [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT,
+ [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT,
+ [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT,
+ [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT,
+ [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT,
+ [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT,
+ [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT,
+ [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT,
+ [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT,
+};
+
+int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val)
+{
+ u8 reg;
+
+ reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+
+ return pcf50633_reg_set_bit_mask(pcf, reg, 0x07, val);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_set);
+
+u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio)
+{
+ u8 reg, val;
+
+ reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+ val = pcf50633_reg_read(pcf, reg) & 0x07;
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_get);
+
+int pcf50633_gpio_invert_set(struct pcf50633 *pcf, int gpio, int invert)
+{
+ u8 val, reg;
+
+ reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+ val = !!invert << 3;
+
+ return pcf50633_reg_set_bit_mask(pcf, reg, 1 << 3, val);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_set);
+
+int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio)
+{
+ u8 reg, val;
+
+ reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+ val = pcf50633_reg_read(pcf, reg);
+
+ return val & (1 << 3);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_get);
+
+int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
+ int gpio, int regulator, int on)
+{
+ u8 reg, val, mask;
+
+ /* the *ENA register is always one after the *OUT register */
+ reg = pcf50633_regulator_registers[regulator] + 1;
+
+ val = !!on << (gpio - PCF50633_GPIO1);
+ mask = 1 << (gpio - PCF50633_GPIO1);
+
+ return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
diff --git a/include/linux/mfd/pcf50633/gpio.h b/include/linux/mfd/pcf50633/gpio.h
new file mode 100644
index 0000000..a42b845
--- /dev/null
+++ b/include/linux/mfd/pcf50633/gpio.h
@@ -0,0 +1,52 @@
+/*
+ * gpio.h -- GPIO driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_GPIO_H
+#define __LINUX_MFD_PCF50633_GPIO_H
+
+#include <linux/mfd/pcf50633/core.h>
+
+#define PCF50633_GPIO1 1
+#define PCF50633_GPIO2 2
+#define PCF50633_GPIO3 3
+#define PCF50633_GPO 4
+
+#define PCF50633_REG_GPIO1CFG 0x14
+#define PCF50633_REG_GPIO2CFG 0x15
+#define PCF50633_REG_GPIO3CFG 0x16
+#define PCF50633_REG_GPOCFG 0x17
+
+#define PCF50633_GPOCFG_GPOSEL_MASK 0x07
+
+enum pcf50633_reg_gpocfg {
+ PCF50633_GPOCFG_GPOSEL_0 = 0x00,
+ PCF50633_GPOCFG_GPOSEL_LED_NFET = 0x01,
+ PCF50633_GPOCFG_GPOSEL_SYSxOK = 0x02,
+ PCF50633_GPOCFG_GPOSEL_CLK32K = 0x03,
+ PCF50633_GPOCFG_GPOSEL_ADAPUSB = 0x04,
+ PCF50633_GPOCFG_GPOSEL_USBxOK = 0x05,
+ PCF50633_GPOCFG_GPOSEL_ACTPH4 = 0x06,
+ PCF50633_GPOCFG_GPOSEL_1 = 0x07,
+ PCF50633_GPOCFG_GPOSEL_INVERSE = 0x08,
+};
+
+int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val);
+u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert);
+int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_power_supply_set(struct pcf50633 *,
+ int gpio, int regulator, int on);
+#endif /* __LINUX_MFD_PCF50633_GPIO_H */
+
+
