Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] scsi_lib.c: properly count the number of pages in scsi_req_map_sg()
[SCSI] scsi_transport_sas: make write attrs writeable
[SCSI] scsi_transport_sas; fix user_scan
[SCSI] ppa: fix for machines with highmem
[SCSI] mptspi: reset handler shouldn't be called for other bus protocols
[SCSI] Blacklist entry for HP dat changer
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 15fc8fb..4820366 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -259,9 +259,9 @@
}
sub nxt2002 {
- my $sourcefile = "Broadband4PC_4_2_11.zip";
+ my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
my $url = "http://www.bbti.us/download/windows/$sourcefile";
- my $hash = "c6d2ea47a8f456d887ada0cfb718ff2a";
+ my $hash = "476befae8c7c1bb9648954060b1eec1f";
my $outfile = "dvb-fe-nxt2002.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -269,8 +269,8 @@
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
- verify("$tmpdir/SkyNETU.sys", $hash);
- extract("$tmpdir/SkyNETU.sys", 375832, 5908, $outfile);
+ verify("$tmpdir/SkyNET.sys", $hash);
+ extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);
$outfile;
}
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index 43e836c..e9cc8bb 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -105,20 +105,3 @@
on the setup, so I think that the choice on what firmware to make
persistent should be left to userspace.
- - Why register_firmware()+__init can be useful:
- - For boot devices needing firmware.
- - To make the transition easier:
- The firmware can be declared __init and register_firmware()
- called on module_init. Then the firmware is warranted to be
- there even if "firmware hotplug userspace" is not there yet or
- it doesn't yet provide the needed firmware.
- Once the firmware is widely available in userspace, it can be
- removed from the kernel. Or made optional (CONFIG_.*_FIRMWARE).
-
- In either case, if firmware hotplug support is there, it can move the
- firmware out of kernel memory into the real filesystem for later
- usage.
-
- Note: If persistence is implemented on top of initramfs,
- register_firmware() may not be appropriate.
-
diff --git a/Documentation/firmware_class/firmware_sample_driver.c b/Documentation/firmware_class/firmware_sample_driver.c
index ad3edab..87feccd 100644
--- a/Documentation/firmware_class/firmware_sample_driver.c
+++ b/Documentation/firmware_class/firmware_sample_driver.c
@@ -5,8 +5,6 @@
*
* Sample code on how to use request_firmware() from drivers.
*
- * Note that register_firmware() is currently useless.
- *
*/
#include <linux/module.h>
@@ -17,11 +15,6 @@
#include "linux/firmware.h"
-#define WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-char __init inkernel_firmware[] = "let's say that this is firmware\n";
-#endif
-
static struct device ghost_device = {
.bus_id = "ghost0",
};
@@ -104,10 +97,6 @@
static int sample_init(void)
{
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
- register_firmware("sample_driver_fw", inkernel_firmware,
- sizeof(inkernel_firmware));
-#endif
device_initialize(&ghost_device);
/* since there is no real hardware insertion I just call the
* sample probe functions here */
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index df82116..88ad615 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -214,12 +214,13 @@
The interaction of the iflag bits is as follows (parity error
given as an example):
Parity error INPCK IGNPAR
- None n/a n/a character received
- Yes n/a 0 character discarded
- Yes 0 1 character received, marked as
+ n/a 0 n/a character received, marked as
TTY_NORMAL
- Yes 1 1 character received, marked as
+ None 1 n/a character received, marked as
+ TTY_NORMAL
+ Yes 1 0 character received, marked as
TTY_PARITY
+ Yes 1 1 character discarded
Other flags may be used (eg, xon/xoff characters) if your
hardware supports hardware "soft" flow control.
diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt
index c5beb54..21ed511 100644
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.txt
@@ -36,6 +36,9 @@
some data to the device. So a very simple watchdog daemon would look
like this:
+#include <stdlib.h>
+#include <fcntl.h>
+
int main(int argc, const char *argv[]) {
int fd=open("/dev/watchdog",O_WRONLY);
if (fd==-1) {
diff --git a/MAINTAINERS b/MAINTAINERS
index 753584c..74d71ca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -40,11 +40,20 @@
PLEASE document known bugs. If it doesn't work for everything
or does something very odd once a month document it.
+ PLEASE remember that submissions must be made under the terms
+ of the OSDL certificate of contribution
+ (http://www.osdl.org/newsroom/press_releases/2004/2004_05_24_dco.html)
+ and should include a Signed-off-by: line.
+
6. Make sure you have the right to send any changes you make. If you
do changes at work you may find your employer owns the patch
not you.
-7. Happy hacking.
+7. When sending security related changes or reports to a maintainer
+ please Cc: security@kernel.org, especially if the maintainer
+ does not respond.
+
+8. Happy hacking.
-----------------------------------
@@ -556,7 +565,7 @@
P: Arnd Bergmann
M: arnd@arndb.de
L: linuxppc-dev@ozlabs.org
-W: http://linuxppc64.org
+W: http://www.penguinppc.org/ppc64/
S: Supported
BTTV VIDEO4LINUX DRIVER
@@ -969,7 +978,7 @@
EXT3 FILE SYSTEM
P: Stephen Tweedie, Andrew Morton
M: sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
-L: ext3-users@redhat.com
+L: ext2-devel@lists.sourceforge.net
S: Maintained
F71805F HARDWARE MONITORING DRIVER
@@ -1530,12 +1539,28 @@
T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
S: Supported
+JOURNALLING LAYER FOR BLOCK DEVICS (JBD)
+P: Stephen Tweedie, Andrew Morton
+M: sct@redhat.com, akpm@osdl.org
+L: ext2-devel@lists.sourceforge.net
+S: Maintained
+
KCONFIG
P: Roman Zippel
M: zippel@linux-m68k.org
L: kbuild-devel@lists.sourceforge.net
S: Maintained
+KDUMP
+P: Vivek Goyal
+M: vgoyal@in.ibm.com
+P: Haren Myneni
+M: hbabu@us.ibm.com
+L: fastboot@lists.osdl.org
+L: linux-kernel@vger.kernel.org
+W: http://lse.sourceforge.net/kdump/
+S: Maintained
+
KERNEL AUTOMOUNTER (AUTOFS)
P: H. Peter Anvin
M: hpa@zytor.com
@@ -1691,7 +1716,7 @@
P: Anton Blanchard
M: anton@samba.org
M: anton@au.ibm.com
-W: http://linuxppc64.org
+W: http://www.penguinppc.org/ppc64/
L: linuxppc-dev@ozlabs.org
S: Supported
@@ -1874,6 +1899,12 @@
L: linux-scsi@vger.kernel.org
S: Maintained
+NETEM NETWORK EMULATOR
+P: Stephen Hemminger
+M: shemminger@osdl.org
+L: netem@osdl.org
+S: Maintained
+
NETFILTER/IPTABLES/IPCHAINS
P: Rusty Russell
P: Marc Boucher
diff --git a/Makefile b/Makefile
index 3494c17..435d209 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 17
-EXTRAVERSION =-rc4
-NAME=Sliding Snow Leopard
+EXTRAVERSION =-rc5
+NAME=Lordi Rules
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 092ee12..affd1d5 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -178,8 +178,12 @@
static void ixp23xx_irq_mask(unsigned int irq)
{
- volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+ volatile unsigned long *intr_reg;
+ if (irq >= 56)
+ irq += 8;
+
+ intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg &= ~(1 << (irq % 32));
}
@@ -199,17 +203,25 @@
*/
static void ixp23xx_irq_level_unmask(unsigned int irq)
{
- volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+ volatile unsigned long *intr_reg;
ixp23xx_irq_ack(irq);
+ if (irq >= 56)
+ irq += 8;
+
+ intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}
static void ixp23xx_irq_edge_unmask(unsigned int irq)
{
- volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+ volatile unsigned long *intr_reg;
+ if (irq >= 56)
+ irq += 8;
+
+ intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
*intr_reg |= (1 << (irq % 32));
}
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 98356f8..02e188d 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -95,7 +95,10 @@
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
set_irq_chip(irq, &mainstone_irq_chip);
set_irq_handler(irq, do_level_IRQ);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+ else
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
set_irq_flags(MAINSTONE_IRQ(8), 0);
set_irq_flags(MAINSTONE_IRQ(12), 0);
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 832fb86..73de2ea 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -59,8 +59,7 @@
mrc p15, 0, r5, c13, c0, 0 @ PID
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ translation table base address
- mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register
- mrc p15, 0, r9, c1, c0, 0 @ control register
+ mrc p15, 0, r8, c1, c0, 0 @ control register
stmia r0, { r4 - r13 }
@@ -165,7 +164,6 @@
mcr p15, 0, r5, c13, c0, 0 @ PID
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ translation table base
- mcr p15, 0, r8, c1, c1, 0 @ auxilliary control
#ifdef CONFIG_DEBUG_RESUME
mov r3, #'R'
@@ -173,7 +171,7 @@
#endif
ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
+ mcr p15, 0, r8, c1, c0, 0 @ turn on MMU, etc
nop @ second-to-last before mmu
mov pc, r2 @ go back to virtual address
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index f14b2d0..95273de 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -376,7 +376,7 @@
ecc_mask = 0;
}
- if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+ if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
if (mem_types[i].prot_l1)
mem_types[i].prot_l1 |= PMD_BIT4;
@@ -631,7 +631,7 @@
pgd = init_mm.pgd;
base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
- if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+ if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
base_pmdval |= PMD_BIT4;
for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 80873b3..8d32e21 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -427,12 +427,13 @@
#endif
mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg
mrc p15, 0, r0, c1, c0, 0 @ get control register
- bic r0, r0, #0x0200 @ .... ..R. .... ....
bic r0, r0, #0x0002 @ .... .... .... ..A.
orr r0, r0, #0x0005 @ .... .... .... .C.M
#if BTB_ENABLE
+ bic r0, r0, #0x0200 @ .... ..R. .... ....
orr r0, r0, #0x3900 @ ..VI Z..S .... ....
#else
+ bic r0, r0, #0x0a00 @ .... Z.R. .... ....
orr r0, r0, #0x3100 @ ..VI ...S .... ....
#endif
#if L2_CACHE_ENABLE
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index daee695..40e5aba 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -1066,14 +1066,6 @@
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
},
},
- {
- .callback = disable_acpi_pci,
- .ident = "HP xw9300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
- },
- },
{}
};
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 013b85d..3d4b2f3 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -1341,6 +1341,14 @@
connect_bsp_APIC();
+ /*
+ * Hack: In case of kdump, after a crash, kernel might be booting
+ * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+ * might be zero if read from MP tables. Get it from LAPIC.
+ */
+#ifdef CONFIG_CRASH_DUMP
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+#endif
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
setup_local_APIC();
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index f48bef1..af56987 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -315,3 +315,4 @@
.long sys_splice
.long sys_sync_file_range
.long sys_tee /* 315 */
+ .long sys_vmsplice
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 2d22f57..0e49836 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -130,9 +130,8 @@
print_symbol("%s", addr);
printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS;
-
if (printed)
- printk(" ");
+ printk(" ");
else
printk("\n");
@@ -212,7 +211,6 @@
}
stack = esp;
- printk(log_lvl);
for(i = 0; i < kstack_depth_to_print; i++) {
if (kstack_end(stack))
break;
diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c
index cea5b3c..d55fa7b 100644
--- a/arch/i386/mach-generic/probe.c
+++ b/arch/i386/mach-generic/probe.c
@@ -93,9 +93,11 @@
int i;
for (i = 0; apic_probe[i]; ++i) {
if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) {
- genapic = apic_probe[i];
- printk(KERN_INFO "Switched to APIC driver `%s'.\n",
- genapic->name);
+ if (!cmdline_apic) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+ genapic->name);
+ }
return 1;
}
}
@@ -107,9 +109,11 @@
int i;
for (i = 0; apic_probe[i]; ++i) {
if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
- genapic = apic_probe[i];
- printk(KERN_INFO "Switched to APIC driver `%s'.\n",
- genapic->name);
+ if (!cmdline_apic) {
+ genapic = apic_probe[i];
+ printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+ genapic->name);
+ }
return 1;
}
}
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index ae6534a..3df1371 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -651,7 +651,7 @@
* Specifically, in the case of x86, we will always add
* memory to the highmem for now.
*/
-#ifdef CONFIG_HOTPLUG_MEMORY
+#ifdef CONFIG_MEMORY_HOTPLUG
#ifndef CONFIG_NEED_MULTIPLE_NODES
int add_memory(u64 start, u64 size)
{
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index 50a0bef..79b2370 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -92,7 +92,7 @@
write_cr4(ctxt->cr4);
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
- write_cr2(ctxt->cr0);
+ write_cr0(ctxt->cr0);
/*
* now restore the descriptor tables to their proper values
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ee5fbb0..e8ff09f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -13,7 +13,7 @@
default SGI_IP22
config MIPS_MTX1
- bool "Support for 4G Systems MTX-1 board"
+ bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SOC_AU1500
@@ -120,7 +120,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_COBALT
- bool "Support for Cobalt Server"
+ bool "Cobalt Server"
select DMA_NONCOHERENT
select HW_HAS_PCI
select I8259
@@ -132,7 +132,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config MACH_DECSTATION
- bool "Support for DECstations"
+ bool "DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
select EARLY_PRINTK
@@ -158,7 +158,7 @@
otherwise choose R3000.
config MIPS_EV64120
- bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+ bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -175,7 +175,7 @@
kernel for this platform.
config MIPS_EV96100
- bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+ bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -195,7 +195,7 @@
here if you wish to build a kernel for this platform.
config MIPS_IVR
- bool "Support for Globespan IVR board"
+ bool "Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
@@ -211,7 +211,7 @@
build a kernel for this platform.
config MIPS_ITE8172
- bool "Support for ITE 8172G board"
+ bool "ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
@@ -228,7 +228,7 @@
a kernel for this platform.
config MACH_JAZZ
- bool "Support for the Jazz family of machines"
+ bool "Jazz family of machines"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
@@ -246,7 +246,7 @@
Olivetti M700-10 workstations.
config LASAT
- bool "Support for LASAT Networks platforms"
+ bool "LASAT Networks platforms"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_GT64120
@@ -258,7 +258,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_ATLAS
- bool "Support for MIPS Atlas board"
+ bool "MIPS Atlas board"
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
@@ -283,7 +283,7 @@
board.
config MIPS_MALTA
- bool "Support for MIPS Malta board"
+ bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
@@ -311,7 +311,7 @@
board.
config MIPS_SEAD
- bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+ bool "MIPS SEAD board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select IRQ_CPU
select DMA_NONCOHERENT
@@ -328,7 +328,7 @@
board.
config MIPS_SIM
- bool 'Support for MIPS simulator (MIPSsim)'
+ bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
@@ -341,7 +341,7 @@
emulator.
config MOMENCO_JAGUAR_ATX
- bool "Support for Momentum Jaguar board"
+ bool "Momentum Jaguar board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -361,7 +361,7 @@
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT
- bool "Support for Momentum Ocelot board"
+ bool "Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -378,7 +378,7 @@
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_3
- bool "Support for Momentum Ocelot-3 board"
+ bool "Momentum Ocelot-3 board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -397,7 +397,7 @@
PMC-Sierra Rm79000 core.
config MOMENCO_OCELOT_C
- bool "Support for Momentum Ocelot-C board"
+ bool "Momentum Ocelot-C board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -414,7 +414,7 @@
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_G
- bool "Support for Momentum Ocelot-G board"
+ bool "Momentum Ocelot-G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -431,23 +431,23 @@
Momentum Computer <http://www.momenco.com/>.
config MIPS_XXS1500
- bool "Support for MyCable XXS1500 board"
+ bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_V2PCI
- bool "Support for Philips PNX8550 based Viper2-PCI board"
+ bool "Philips PNX8550 based Viper2-PCI board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
- bool "Support for Philips PNX8550 based JBS board"
+ bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config DDB5074
- bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+ bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DDB5XXX_COMMON
select DMA_NONCOHERENT
@@ -465,7 +465,7 @@
evaluation board.
config DDB5476
- bool "Support for NEC DDB Vrc-5476"
+ bool "NEC DDB Vrc-5476"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
@@ -486,7 +486,7 @@
IDE controller, PS2 keyboard, PS2 mouse, etc.
config DDB5477
- bool "Support for NEC DDB Vrc-5477"
+ bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HW_HAS_PCI
@@ -504,13 +504,13 @@
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
- bool "Support for NEC VR4100 series based machines"
+ bool "NEC VR41XX-based machines"
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
config PMC_YOSEMITE
- bool "Support for PMC-Sierra Yosemite eval board"
+ bool "PMC-Sierra Yosemite eval board"
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
@@ -527,7 +527,7 @@
manufactured by PMC-Sierra.
config QEMU
- bool "Support for Qemu"
+ bool "Qemu"
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
@@ -547,7 +547,7 @@
can be found at http://www.linux-mips.org/wiki/Qemu.
config SGI_IP22
- bool "Support for SGI IP22 (Indy/Indigo2)"
+ bool "SGI IP22 (Indy/Indigo2)"
select ARC
select ARC32
select BOOT_ELF32
@@ -567,7 +567,7 @@
that runs on these, say Y here.
config SGI_IP27
- bool "Support for SGI IP27 (Origin200/2000)"
+ bool "SGI IP27 (Origin200/2000)"
select ARC
select ARC64
select BOOT_ELF64
@@ -583,7 +583,7 @@
here.
config SGI_IP32
- bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+ bool "SGI IP32 (O2) (EXPERIMENTAL)"
depends on EXPERIMENTAL
select ARC
select ARC32
@@ -604,7 +604,7 @@
If you want this kernel to run on SGI O2 workstation, say Y here.
config SIBYTE_BIGSUR
- bool "Support for Sibyte BCM91480B-BigSur"
+ bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
select PCI_DOMAINS
@@ -615,7 +615,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SWARM
- bool "Support for Sibyte BCM91250A-SWARM"
+ bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
select SIBYTE_SB1250
@@ -626,7 +626,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SENTOSA
- bool "Support for Sibyte BCM91250E-Sentosa"
+ bool "Sibyte BCM91250E-Sentosa"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -637,7 +637,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_RHONE
- bool "Support for Sibyte BCM91125E-Rhone"
+ bool "Sibyte BCM91125E-Rhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -648,7 +648,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CARMEL
- bool "Support for Sibyte BCM91120x-Carmel"
+ bool "Sibyte BCM91120x-Carmel"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -659,7 +659,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_PTSWARM
- bool "Support for Sibyte BCM91250PT-PTSWARM"
+ bool "Sibyte BCM91250PT-PTSWARM"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -671,7 +671,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_LITTLESUR
- bool "Support for Sibyte BCM91250C2-LittleSur"
+ bool "Sibyte BCM91250C2-LittleSur"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -683,7 +683,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHINE
- bool "Support for Sibyte BCM91120C-CRhine"
+ bool "Sibyte BCM91120C-CRhine"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -694,7 +694,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHONE
- bool "Support for Sibyte BCM91125C-CRhone"
+ bool "Sibyte BCM91125C-CRhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
@@ -706,7 +706,7 @@
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM200_PCI
- bool "Support for SNI RM200 PCI"
+ bool "SNI RM200 PCI"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
@@ -732,7 +732,7 @@
support this machine type.
config TOSHIBA_JMR3927
- bool "Support for Toshiba JMR-TX3927 board"
+ bool "Toshiba JMR-TX3927 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
@@ -743,7 +743,7 @@
select TOSHIBA_BOARDS
config TOSHIBA_RBTX4927
- bool "Support for Toshiba TBTX49[23]7 board"
+ bool "Toshiba TBTX49[23]7 board"
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
@@ -760,7 +760,7 @@
support this machine type
config TOSHIBA_RBTX4938
- bool "Support for Toshiba RBTX4938 board"
+ bool "Toshiba RBTX4938 board"
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
@@ -1411,13 +1411,12 @@
config PAGE_SIZE_16KB
bool "16kB"
- depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+ depends on !CPU_R3000 && !CPU_TX39XX
help
Using 16kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
- all non-R3000 family processor. Not that at the time of this
- writing this option is still high experimental; there are also
- issues with compatibility of user applications.
+ all non-R3000 family processors. Note that you will need a suitable
+ Linux distribution to support this.
config PAGE_SIZE_64KB
bool "64kB"
@@ -1426,8 +1425,7 @@
Using 64kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available on
all non-R3000 family processor. Not that at the time of this
- writing this option is still high experimental; there are also
- issues with compatibility of user applications.
+ writing this option is still high experimental.
endchoice
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index da61de7..afe05ec 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -68,6 +68,7 @@
extern void set_debug_traps(void);
extern irq_cpustat_t irq_stat [NR_CPUS];
+extern void mips_timer_interrupt(struct pt_regs *regs);
static void setup_local_irq(unsigned int irq, int type, int int_req);
static unsigned int startup_irq(unsigned int irq);
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f85f152..f74d66a 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -116,6 +116,7 @@
null:
ack_r4ktimer(0);
+ irq_exit();
}
#ifdef CONFIG_PM
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 92b28b6..0facfaf 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -272,8 +272,8 @@
text("/* Linux sigcontext offsets. */");
offset("#define SC_REGS ", struct sigcontext, sc_regs);
offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
- offset("#define SC_MDHI ", struct sigcontext, sc_hi);
- offset("#define SC_MDLO ", struct sigcontext, sc_lo);
+ offset("#define SC_MDHI ", struct sigcontext, sc_mdhi);
+ offset("#define SC_MDLO ", struct sigcontext, sc_mdlo);
offset("#define SC_PC ", struct sigcontext, sc_pc);
offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
linefeed;
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 58b3b14..bef3e2d 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -121,6 +121,7 @@
case CPU_24K:
case CPU_25KF:
case CPU_34K:
+ case CPU_74K:
case CPU_PR4450:
cpu_wait = r4k_wait;
printk(" available.\n");
@@ -432,6 +433,15 @@
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
+ case PRID_IMP_R14000:
+ c->cputype = CPU_R14000;
+ c->isa_level = MIPS_CPU_ISA_IV;
+ c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+ MIPS_CPU_FPU | MIPS_CPU_32FPR |
+ MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+ MIPS_CPU_LLSC;
+ c->tlbsize = 64;
+ break;
}
}
@@ -593,6 +603,9 @@
case PRID_IMP_34K:
c->cputype = CPU_34K;
break;
+ case PRID_IMP_74K:
+ c->cputype = CPU_74K;
+ break;
}
}
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index d101d2f..a9c6de1 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -101,7 +101,7 @@
EMT
1:
mfc0 v1, CP0_TCSTATUS
- /* We set IXMT above, XOR should cler it here */
+ /* We set IXMT above, XOR should clear it here */
xori v1, v1, TCSTATUS_IXMT
or v1, v0, v1
mtc0 v1, CP0_TCSTATUS
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 10f28fb..5fd7a8a 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -54,9 +54,11 @@
*/
mfc0 k0, CP0_CAUSE
andi k0, k0, 0x7c
- add k1, k1, k0
- PTR_L k0, saved_vectors(k1)
- jr k0
+#ifdef CONFIG_64BIT
+ dsll k0, k0, 1
+#endif
+ PTR_L k1, saved_vectors(k0)
+ jr k1
nop
1:
move k0, sp
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 84ab959..9def554 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -42,6 +42,7 @@
[CPU_R8000] = "R8000",
[CPU_R10000] = "R10000",
[CPU_R12000] = "R12000",
+ [CPU_R14000] = "R14000",
[CPU_R4300] = "R4300",
[CPU_R4650] = "R4650",
[CPU_R4700] = "R4700",
@@ -74,6 +75,7 @@
[CPU_24K] = "MIPS 24K",
[CPU_25KF] = "MIPS 25Kf",
[CPU_34K] = "MIPS 34K",
+ [CPU_74K] = "MIPS 74K",
[CPU_VR4111] = "NEC VR4111",
[CPU_VR4121] = "NEC VR4121",
[CPU_VR4122] = "NEC VR4122",
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 3ca7862..ce6cb91 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -31,7 +31,6 @@
save_gp_reg(31);
#undef save_gp_reg
-#ifdef CONFIG_32BIT
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
@@ -43,20 +42,6 @@
err |= __put_user(mflo3(), &sc->sc_lo3);
err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
}
-#endif
-#ifdef CONFIG_64BIT
- err |= __put_user(regs->hi, &sc->sc_hi[0]);
- err |= __put_user(regs->lo, &sc->sc_lo[0]);
- if (cpu_has_dsp) {
- err |= __put_user(mfhi1(), &sc->sc_hi[1]);
- err |= __put_user(mflo1(), &sc->sc_lo[1]);
- err |= __put_user(mfhi2(), &sc->sc_hi[2]);
- err |= __put_user(mflo2(), &sc->sc_lo[2]);
- err |= __put_user(mfhi3(), &sc->sc_hi[3]);
- err |= __put_user(mflo3(), &sc->sc_lo[3]);
- err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
- }
-#endif
err |= __put_user(!!used_math(), &sc->sc_used_math);
@@ -92,7 +77,6 @@
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
-#ifdef CONFIG_32BIT
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
@@ -104,20 +88,6 @@
err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
}
-#endif
-#ifdef CONFIG_64BIT
- err |= __get_user(regs->hi, &sc->sc_hi[0]);
- err |= __get_user(regs->lo, &sc->sc_lo[0]);
- if (cpu_has_dsp) {
- err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
- err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
- err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
- err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
- err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
- err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
- err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
- }
-#endif
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 2aeaa2f..8f4fdd9 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -280,27 +280,6 @@
char __user *name;
switch(cmd) {
- case SETNAME: {
- char nodename[__NEW_UTS_LEN + 1];
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- name = (char __user *) arg1;
-
- len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
- if (len < 0)
- return -EFAULT;
-
- down_write(&uts_sem);
- strncpy(system_utsname.nodename, nodename, len);
- nodename[__NEW_UTS_LEN] = '\0';
- strlcpy(system_utsname.nodename, nodename,
- sizeof(system_utsname.nodename));
- up_write(&uts_sem);
- return 0;
- }
-
case MIPS_ATOMIC_SET:
printk(KERN_CRIT "How did I get here?\n");
return -EINVAL;
@@ -313,9 +292,6 @@
case FLUSH_CACHE:
__flush_cache_all();
return 0;
-
- case MIPS_RDNVRAM:
- return -EIO;
}
return -EINVAL;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 4901f0a..35cb08d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -902,6 +902,7 @@
{
switch (current_cpu_data.cputype) {
case CPU_24K:
+ case CPU_34K:
case CPU_5KC:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 14fa00e..b84d1f9 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -151,23 +151,13 @@
/* This is the MIPS specific mdebug section. */
.mdebug : { *(.mdebug) }
- /* These are needed for ELF backends which have not yet been
- converted to the new style linker. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- /* DWARF debug sections.
- Symbols in the .debug DWARF section are relative to the beginning of the
- section so we begin .debug at 0. It's not clear yet what needs to happen
- for the others. */
- .debug 0 : { *(.debug) }
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- .line 0 : { *(.line) }
+
+ STABS_DEBUG
+
+ DWARF_DEBUG
+
/* These must appear regardless of . */
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
- .comment : { *(.comment) }
.note : { *(.note) }
}
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 4182e11..6b35417 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -29,6 +29,27 @@
#include <asm/war.h>
#include <asm/cacheflush.h> /* for run_uncached() */
+
+/*
+ * Special Variant of smp_call_function for use by cache functions:
+ *
+ * o No return value
+ * o collapses to normal function call on UP kernels
+ * o collapses to normal function call on systems with a single shared
+ * primary cache.
+ */
+static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
+ int retry, int wait)
+{
+ preempt_disable();
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+ smp_call_function(func, info, retry, wait);
+#endif
+ func(info);
+ preempt_enable();
+}
+
/*
* Must die.
*/
@@ -299,7 +320,7 @@
if (!cpu_has_dc_aliases)
return;
- on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k___flush_cache_all(void * args)
@@ -314,13 +335,14 @@
case CPU_R4400MC:
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
r4k_blast_scache();
}
}
static void r4k___flush_cache_all(void)
{
- on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
+ r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
}
static inline void local_r4k_flush_cache_range(void * args)
@@ -341,7 +363,7 @@
static void r4k_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
}
static inline void local_r4k_flush_cache_mm(void * args)
@@ -370,7 +392,7 @@
if (!cpu_has_dc_aliases)
return;
- on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
}
struct flush_cache_page_args {
@@ -461,7 +483,7 @@
args.addr = addr;
args.pfn = pfn;
- on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
}
static inline void local_r4k_flush_data_cache_page(void * addr)
@@ -471,7 +493,7 @@
static void r4k_flush_data_cache_page(unsigned long addr)
{
- on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
}
struct flush_icache_range_args {
@@ -514,7 +536,7 @@
args.start = start;
args.end = end;
- on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
instruction_hazard();
}
@@ -590,7 +612,7 @@
args.vma = vma;
args.page = page;
- on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
}
@@ -689,7 +711,7 @@
static void r4k_flush_cache_sigtramp(unsigned long addr)
{
- on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
+ r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
}
static void r4k_flush_icache_all(void)
@@ -812,6 +834,7 @@
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
c->icache.linesz = 64;
c->icache.ways = 2;
@@ -965,9 +988,11 @@
c->dcache.flags |= MIPS_CACHE_PINDEX;
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
case CPU_SB1:
break;
case CPU_24K:
+ case CPU_34K:
if (!(read_c0_config7() & (1 << 16)))
default:
if (c->dcache.waysize > PAGE_SIZE)
@@ -1091,6 +1116,7 @@
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
c->scache.linesz = 64 << ((config >> 13) & 1);
c->scache.ways = 2;
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index e4390dc..b7c7492 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -357,6 +357,7 @@
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
pref_src_mode = Pref_LoadStreamed;
pref_dst_mode = Pref_StoreStreamed;
break;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 053dbac..54507be 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -875,6 +875,7 @@
case CPU_R10000:
case CPU_R12000:
+ case CPU_R14000:
case CPU_4KC:
case CPU_SB1:
case CPU_SB1A:
@@ -906,6 +907,7 @@
case CPU_4KEC:
case CPU_24K:
case CPU_34K:
+ case CPU_74K:
i_ehb(p);
tlbw(p);
break;
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index f2b4862..91b799d 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -80,6 +80,7 @@
case CPU_24K:
case CPU_25KF:
case CPU_34K:
+ case CPU_74K:
case CPU_SB1:
case CPU_SB1A:
lmodel = &op_model_mipsxx;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 95d488c..e7ce923 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -205,6 +205,10 @@
case CPU_34K:
op_model_mipsxx.cpu_type = "mips/34K";
break;
+
+ case CPU_74K:
+ op_model_mipsxx.cpu_type = "mips/74K";
+ break;
#endif
case CPU_5KC:
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 2d80653..41e9ab4 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2057,10 +2057,45 @@
}
-
-static void __init fixup_device_tree(void)
+#ifdef CONFIG_PPC_MAPLE
+/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
+ * The values are bad, and it doesn't even have the right number of cells. */
+static void __init fixup_device_tree_maple(void)
{
+ phandle isa;
+ u32 isa_ranges[6];
+
+ isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+ if (!PHANDLE_VALID(isa))
+ return;
+
+ if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
+ == PROM_ERROR)
+ return;
+
+ if (isa_ranges[0] != 0x1 ||
+ isa_ranges[1] != 0xf4000000 ||
+ isa_ranges[2] != 0x00010000)
+ return;
+
+ prom_printf("fixing up bogus ISA range on Maple...\n");
+
+ isa_ranges[0] = 0x1;
+ isa_ranges[1] = 0x0;
+ isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+ isa_ranges[3] = 0x0;
+ isa_ranges[4] = 0x0;
+ isa_ranges[5] = 0x00010000;
+ prom_setprop(isa, "/ht@0/isa@4", "ranges",
+ isa_ranges, sizeof(isa_ranges));
+}
+#else
+#define fixup_device_tree_maple()
+#endif
+
#if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
+static void __init fixup_device_tree_pmac(void)
+{
phandle u3, i2c, mpic;
u32 u3_rev;
u32 interrupts[2];
@@ -2097,9 +2132,16 @@
parent = (u32)mpic;
prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
&parent, sizeof(parent));
-#endif
}
+#else
+#define fixup_device_tree_pmac()
+#endif
+static void __init fixup_device_tree(void)
+{
+ fixup_device_tree_maple();
+ fixup_device_tree_pmac();
+}
static void __init prom_find_boot_cpu(void)
{
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index cf56a1d..26ed1f5 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -338,6 +338,8 @@
SYSCALL(readlinkat)
SYSCALL(fchmodat)
SYSCALL(faccessat)
+COMPAT_SYS(get_robust_list)
+COMPAT_SYS(set_robust_list)
/*
* please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 95b3643..b47fcc5 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -258,6 +258,7 @@
[__NR_futex] sys_futex,
[__NR_sched_setaffinity] sys_sched_setaffinity,
[__NR_sched_getaffinity] sys_sched_getaffinity,
+ [224] sys_ni_syscall,
[__NR_tuxcall] sys_ni_syscall,
[226] sys_ni_syscall,
[__NR_io_setup] sys_io_setup,
@@ -332,19 +333,21 @@
[__NR_readlinkat] sys_readlinkat,
[__NR_fchmodat] sys_fchmodat,
[__NR_faccessat] sys_faccessat,
+ [__NR_get_robust_list] sys_get_robust_list,
+ [__NR_set_robust_list] sys_set_robust_list,
};
long spu_sys_callback(struct spu_syscall_block *s)
{
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
- syscall = spu_syscall_table[s->nr_ret];
-
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
return -ENOSYS;
}
+ syscall = spu_syscall_table[s->nr_ret];
+
#ifdef DEBUG
print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index df2343e..c896ce8 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1157,6 +1157,7 @@
/* some quirks for platform function decoding */
enum {
pmac_i2c_quirk_invmask = 0x00000001u,
+ pmac_i2c_quirk_skip = 0x00000002u,
};
static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
@@ -1172,6 +1173,15 @@
/* XXX Study device-tree's & apple drivers are get the quirks
* right !
*/
+ /* Workaround: It seems that running the clockspreading
+ * properties on the eMac will cause lockups during boot.
+ * The machine seems to work fine without that. So for now,
+ * let's make sure i2c-hwclock doesn't match about "imic"
+ * clocks and we'll figure out if we really need to do
+ * something special about those later.
+ */
+ { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
+ { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
{ "i2c-cpu-voltage", NULL, 0},
{ "temp-monitor", NULL, 0 },
@@ -1198,6 +1208,8 @@
if (p->compatible &&
!device_is_compatible(np, p->compatible))
continue;
+ if (p->quirks & pmac_i2c_quirk_skip)
+ break;
callback(np, p->quirks);
break;
}
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 4d15e39..b9200fb 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -463,11 +463,23 @@
return 0;
}
+static int pmac_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_DISK:
+ return 1;
+ /* can't do any other states via generic mechanism yet */
+ default:
+ return 0;
+ }
+}
+
static struct pm_ops pmac_pm_ops = {
.pm_disk_mode = PM_DISK_SHUTDOWN,
.prepare = pmac_pm_prepare,
.enter = pmac_pm_enter,
.finish = pmac_pm_finish,
+ .valid = pmac_pm_valid,
};
#endif /* CONFIG_SOFTWARE_SUSPEND */
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
index cc7c4ae..2f5c5e1 100644
--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -134,7 +134,7 @@
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
- DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
index e62b757..abb7154 100644
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ b/arch/ppc/platforms/mpc8272ads_setup.c
@@ -279,11 +279,11 @@
static const struct platform_notify_dev_map dev_map[] = {
{
.bus_id = "fsl-cpm-fcc",
- .rtn = mpc8272ads_fixup_enet_pdata
+ .rtn = mpc8272ads_fixup_enet_pdata,
},
{
.bus_id = "fsl-cpm-scc:uart",
- .rtn = mpc
+ .rtn = mpc8272ads_fixup_uart_pdata,
},
{
.bus_id = NULL
@@ -335,15 +335,15 @@
struct platform_device* pdev = NULL;
if(index) { /*assume SCC4 here*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
- pinfo = &mpc8272<F12>_uart_pdata[1];
+ pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
} else { /*over SCC1*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
- pinfo = &mpc8272_uart_pdata[0];
+ pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
- ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
+ ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
return NULL;
}
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
index 0636aed..8692d00c 100644
--- a/arch/ppc/syslib/pq2_devices.c
+++ b/arch/ppc/syslib/pq2_devices.c
@@ -121,13 +121,13 @@
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A00,
.end = 0x11A1F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8000,
.end = 0x80ff,
.flags = IORESOURCE_MEM,
@@ -145,13 +145,13 @@
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A20,
.end = 0x11A3F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8100,
.end = 0x81ff,
.flags = IORESOURCE_MEM,
@@ -169,13 +169,13 @@
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A40,
.end = 0x11A5F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8200,
.end = 0x82ff,
.flags = IORESOURCE_MEM,
@@ -193,13 +193,13 @@
.num_resources = 3,
.resource = (struct resource[]) {
{
- .name = "scc_mem",
+ .name = "regs",
.start = 0x11A60,
.end = 0x11A7F,
.flags = IORESOURCE_MEM,
},
{
- .name = "scc_pram",
+ .name = "pram",
.start = 0x8300,
.end = 0x83ff,
.flags = IORESOURCE_MEM,
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
index 433b0fa..fee8948 100644
--- a/arch/ppc/syslib/pq2_sys.c
+++ b/arch/ppc/syslib/pq2_sys.c
@@ -139,13 +139,13 @@
.ppc_sys_name = "8272",
.mask = 0x0000ff00,
.value = 0x00000c00,
- .num_devices = 11,
+ .num_devices = 12,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
- MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
- MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
- MPC82xx_CPM_USB, MPC82xx_SEC1,
+ MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
+ MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+ MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
},
},
/* below is a list of the 8280 family of processors */
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 029f099..2a6c6ef 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -272,7 +272,7 @@
next = next_timer_interrupt();
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
- timer = (__u64)(next - jiffies) + jiffies_64;
+ timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64;
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
todval = -1ULL;
/* Be careful about overflows. */
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 6e1135c..2856551 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -79,6 +79,7 @@
/*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/ .long sys_set_robust_list, sys_get_robust_list
#ifdef CONFIG_SUNOS_EMUL
/* Now the SunOS syscall table. */
@@ -190,6 +191,6 @@
/*290*/ .long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
.long sunos_nosys, sunos_nosys, sunos_nosys
- .long sunos_nosys
+ .long sunos_nosys, sunos_nosys, sunos_nosys
#endif
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index 3eadac5..31c5892 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -10,6 +10,7 @@
#include <linux/config.h>
#include <linux/version.h>
#include <linux/errno.h>
+#include <linux/threads.h>
#include <asm/thread_info.h>
#include <asm/asi.h>
#include <asm/pstate.h>
@@ -493,6 +494,35 @@
call prom_init
mov %l7, %o0 ! OpenPROM cif handler
+ /* Initialize current_thread_info()->cpu as early as possible.
+ * In order to do that accurately we have to patch up the get_cpuid()
+ * assembler sequences. And that, in turn, requires that we know
+ * if we are on a Starfire box or not. While we're here, patch up
+ * the sun4v sequences as well.
+ */
+ call check_if_starfire
+ nop
+ call per_cpu_patch
+ nop
+ call sun4v_patch
+ nop
+
+#ifdef CONFIG_SMP
+ call hard_smp_processor_id
+ nop
+ cmp %o0, NR_CPUS
+ blu,pt %xcc, 1f
+ nop
+ call boot_cpu_id_too_large
+ nop
+ /* Not reached... */
+
+1:
+#else
+ mov 0, %o0
+#endif
+ stb %o0, [%g6 + TI_CPU]
+
/* Off we go.... */
call start_kernel
nop
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 8efbc13..82e5455 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -218,7 +218,7 @@
* DMA for PCI device PDEV. Return non-NULL cpu-side address if
* successful and set *DMA_ADDRP to the PCI side dma address.
*/
-static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
{
struct pcidev_cookie *pcp;
struct pci_iommu *iommu;
@@ -232,7 +232,7 @@
if (order >= 10)
return NULL;
- first_page = __get_free_pages(GFP_ATOMIC, order);
+ first_page = __get_free_pages(gfp, order);
if (first_page == 0UL)
return NULL;
memset((char *)first_page, 0, PAGE_SIZE << order);
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index 9e94db2..2b7a1f3 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -154,7 +154,7 @@
__clear_bit(i, arena->map);
}
-static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
{
struct pcidev_cookie *pcp;
struct pci_iommu *iommu;
@@ -169,7 +169,7 @@
npages = size >> IO_PAGE_SHIFT;
- first_page = __get_free_pages(GFP_ATOMIC, order);
+ first_page = __get_free_pages(gfp, order);
if (unlikely(first_page == 0UL))
return NULL;
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 005167f..9cf1c88 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -220,7 +220,7 @@
static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 };
-static void __init per_cpu_patch(void)
+void __init per_cpu_patch(void)
{
struct cpuid_patch_entry *p;
unsigned long ver;
@@ -280,7 +280,7 @@
}
}
-static void __init sun4v_patch(void)
+void __init sun4v_patch(void)
{
struct sun4v_1insn_patch_entry *p1;
struct sun4v_2insn_patch_entry *p2;
@@ -315,6 +315,15 @@
}
}
+#ifdef CONFIG_SMP
+void __init boot_cpu_id_too_large(int cpu)
+{
+ prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n",
+ cpu, NR_CPUS);
+ prom_halt();
+}
+#endif
+
void __init setup_arch(char **cmdline_p)
{
/* Initialize PROM console and command line. */
@@ -332,16 +341,6 @@
conswitchp = &prom_con;
#endif
- /* Work out if we are starfire early on */
- check_if_starfire();
-
- /* Now we know enough to patch the get_cpuid sequences
- * used by trap code.
- */
- per_cpu_patch();
-
- sun4v_patch();
-
boot_flags_init(*cmdline_p);
idprom_init();
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 90eaca3..4e8cd79 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1264,7 +1264,6 @@
boot_cpu_id = hard_smp_processor_id();
current_tick_offset = timer_tick_offset;
- cpu_set(boot_cpu_id, cpu_online_map);
prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1;
}
@@ -1345,18 +1344,6 @@
void __devinit smp_prepare_boot_cpu(void)
{
- int cpu = hard_smp_processor_id();
-
- if (cpu >= NR_CPUS) {
- prom_printf("Serious problem, boot cpu id >= NR_CPUS\n");
- prom_halt();
- }
-
- current_thread_info()->cpu = cpu;
- __local_per_cpu_offset = __per_cpu_offset(cpu);
-
- cpu_set(smp_processor_id(), cpu_online_map);
- cpu_set(smp_processor_id(), phys_cpu_present_map);
}
int __devinit __cpu_up(unsigned int cpu)
@@ -1433,4 +1420,7 @@
for (i = 0; i < NR_CPUS; i++, ptr += size)
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+ /* Setup %g5 for the boot cpu. */
+ __local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
}
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index d4b39cd..1136fc4 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -78,8 +78,9 @@
.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
/*280*/ .word sys32_tee, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
-/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
+/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list
#endif /* CONFIG_COMPAT */
@@ -147,8 +148,9 @@
.word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
/*280*/ .word sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat
.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
-/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/ .word sys_set_robust_list, sys_get_robust_list
#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -261,5 +263,5 @@
/*290*/ .word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
.word sunos_nosys, sunos_nosys, sunos_nosys
- .word sunos_nosys
+ .word sunos_nosys, sunos_nosys, sunos_nosys
#endif
diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c
index e776139..926c474 100644
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86_64/ia32/ia32_binfmt.c
@@ -339,7 +339,7 @@
struct mm_struct *mm = current->mm;
int i, ret;
- stack_base = IA32_STACK_TOP - MAX_ARG_PAGES * PAGE_SIZE;
+ stack_base = stack_top - MAX_ARG_PAGES * PAGE_SIZE;
mm->arg_start = bprm->p + stack_base;
bprm->p += stack_base;
@@ -357,7 +357,7 @@
{
mpnt->vm_mm = mm;
mpnt->vm_start = PAGE_MASK & (unsigned long) bprm->p;
- mpnt->vm_end = IA32_STACK_TOP;
+ mpnt->vm_end = stack_top;
if (executable_stack == EXSTACK_ENABLE_X)
mpnt->vm_flags = VM_STACK_FLAGS | VM_EXEC;
else if (executable_stack == EXSTACK_DISABLE_X)
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index 222b5b4..1ef6028 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -149,7 +149,7 @@
addr = start;
if (addr > ei->addr + ei->size)
continue;
- while (bad_addr(&addr, size) && addr+size < ei->addr + ei->size)
+ while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
;
last = addr + size;
if (last > ei->addr + ei->size)
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index c946e4f..586b34c 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -281,12 +281,7 @@
ja 1f
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
-1: SAVE_REST
- movq %rsp,%rdi
- call syscall_trace_leave
- RESTORE_TOP_OF_STACK %rbx
- RESTORE_REST
+1: movq %rax,RAX-ARGOFFSET(%rsp)
/* Use IRET because user could have changed frame */
jmp int_ret_from_sys_call
CFI_ENDPROC
diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c
index 1eaa5da..fa1d19c 100644
--- a/arch/x86_64/kernel/kprobes.c
+++ b/arch/x86_64/kernel/kprobes.c
@@ -514,13 +514,13 @@
*tos = orig_rip + (*tos - copy_rip);
break;
case 0xff:
- if ((*insn & 0x30) == 0x10) {
+ if ((insn[1] & 0x30) == 0x10) {
/* call absolute, indirect */
/* Fix return addr; rip is correct. */
next_rip = regs->rip;
*tos = orig_rip + (*tos - copy_rip);
- } else if (((*insn & 0x31) == 0x20) || /* jmp near, absolute indirect */
- ((*insn & 0x31) == 0x21)) { /* jmp far, absolute indirect */
+ } else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */
+ ((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */
/* rip is correct. */
next_rip = regs->rip;
}
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index af035ed..a9275c95 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -54,6 +54,10 @@
else
#endif
node = numa_node_id();
+
+ if (node < first_node(node_online_map))
+ node = first_node(node_online_map);
+
page = alloc_pages_node(node, gfp, order);
return page ? page_address(page) : NULL;
}
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index 2480d3f..82a7c9b 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -631,10 +631,8 @@
printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
if (end_pfn > MAX_DMA32_PFN) {
printk(KERN_ERR "WARNING more than 4GB of memory "
- "but IOMMU not compiled in.\n"
- KERN_ERR "WARNING 32bit PCI may malfunction.\n"
- KERN_ERR "You might want to enable "
- "CONFIG_GART_IOMMU\n");
+ "but IOMMU not available.\n"
+ KERN_ERR "WARNING 32bit PCI may malfunction.\n");
}
return -1;
}
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c
index b0444a4..bf421ed 100644
--- a/arch/x86_64/kernel/pmtimer.c
+++ b/arch/x86_64/kernel/pmtimer.c
@@ -68,7 +68,7 @@
offset_delay = delta % (USEC_PER_SEC / HZ);
rdtscll(tsc);
- vxtime.last_tsc = tsc - offset_delay * cpu_khz;
+ vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000;
/* don't calculate delay for first run,
or if we've got less then a tick */
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index f0870be..655b919 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -1051,7 +1051,7 @@
for now. */
node = apicid_to_node[hard_smp_processor_id()];
if (node == NUMA_NO_NODE)
- node = 0;
+ node = first_node(node_online_map);
numa_set_node(cpu, node);
if (acpi_numa > 0)
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index e151353..474df22 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -399,8 +399,10 @@
/* First clean up the node list */
for (i = 0; i < MAX_NUMNODES; i++) {
cutoff_node(i, start, end);
- if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
+ if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
unparse_node(i);
+ node_set_offline(i);
+ }
}
if (acpi_numa <= 0)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 2540dfa..8e9d848 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -33,7 +33,7 @@
#define CFQ_KEY_ASYNC (0)
-static DEFINE_RWLOCK(cfq_exit_lock);
+static DEFINE_SPINLOCK(cfq_exit_lock);
/*
* for the hash of cfqq inside the cfqd
@@ -133,6 +133,7 @@
mempool_t *crq_pool;
int rq_in_driver;
+ int hw_tag;
/*
* schedule slice state info
@@ -500,10 +501,13 @@
/*
* if queue was preempted, just add to front to be fair. busy_rr
- * isn't sorted.
+ * isn't sorted, but insert at the back for fairness.
*/
if (preempted || list == &cfqd->busy_rr) {
- list_add(&cfqq->cfq_list, list);
+ if (preempted)
+ list = list->prev;
+
+ list_add_tail(&cfqq->cfq_list, list);
return;
}
@@ -664,6 +668,15 @@
struct cfq_data *cfqd = q->elevator->elevator_data;
cfqd->rq_in_driver++;
+
+ /*
+ * If the depth is larger 1, it really could be queueing. But lets
+ * make the mark a little higher - idling could still be good for
+ * low queueing, and a low queueing number could also just indicate
+ * a SCSI mid layer like behaviour where limit+1 is often seen.
+ */
+ if (!cfqd->hw_tag && cfqd->rq_in_driver > 4)
+ cfqd->hw_tag = 1;
}
static void cfq_deactivate_request(request_queue_t *q, struct request *rq)
@@ -879,6 +892,13 @@
cfqq = list_entry_cfqq(cfqd->cur_rr.next);
/*
+ * If no new queues are available, check if the busy list has some
+ * before falling back to idle io.
+ */
+ if (!cfqq && !list_empty(&cfqd->busy_rr))
+ cfqq = list_entry_cfqq(cfqd->busy_rr.next);
+
+ /*
* if we have idle queues and no rt or be queues had pending
* requests, either allow immediate service if the grace period
* has passed or arm the idle grace timer
@@ -1284,7 +1304,7 @@
/*
* put the reference this task is holding to the various queues
*/
- read_lock_irqsave(&cfq_exit_lock, flags);
+ spin_lock_irqsave(&cfq_exit_lock, flags);
n = rb_first(&ioc->cic_root);
while (n != NULL) {
@@ -1294,7 +1314,7 @@
n = rb_next(n);
}
- read_unlock_irqrestore(&cfq_exit_lock, flags);
+ spin_unlock_irqrestore(&cfq_exit_lock, flags);
}
static struct cfq_io_context *
@@ -1400,17 +1420,17 @@
struct cfq_io_context *cic;
struct rb_node *n;
- write_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
n = rb_first(&ioc->cic_root);
while (n != NULL) {
cic = rb_entry(n, struct cfq_io_context, rb_node);
-
+
changed_ioprio(cic);
n = rb_next(n);
}
- write_unlock(&cfq_exit_lock);
+ spin_unlock(&cfq_exit_lock);
return 0;
}
@@ -1458,7 +1478,8 @@
* set ->slice_left to allow preemption for a new process
*/
cfqq->slice_left = 2 * cfqd->cfq_slice_idle;
- cfq_mark_cfqq_idle_window(cfqq);
+ if (!cfqd->hw_tag)
+ cfq_mark_cfqq_idle_window(cfqq);
cfq_mark_cfqq_prio_changed(cfqq);
cfq_init_prio_data(cfqq);
}
@@ -1475,9 +1496,10 @@
static void
cfq_drop_dead_cic(struct io_context *ioc, struct cfq_io_context *cic)
{
- read_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
rb_erase(&cic->rb_node, &ioc->cic_root);
- read_unlock(&cfq_exit_lock);
+ list_del_init(&cic->queue_list);
+ spin_unlock(&cfq_exit_lock);
kmem_cache_free(cfq_ioc_pool, cic);
atomic_dec(&ioc_count);
}
@@ -1545,11 +1567,11 @@
BUG();
}
- read_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
rb_link_node(&cic->rb_node, parent, p);
rb_insert_color(&cic->rb_node, &ioc->cic_root);
list_add(&cic->queue_list, &cfqd->cic_list);
- read_unlock(&cfq_exit_lock);
+ spin_unlock(&cfq_exit_lock);
}
/*
@@ -1648,7 +1670,7 @@
{
int enable_idle = cfq_cfqq_idle_window(cfqq);
- if (!cic->ioc->task || !cfqd->cfq_slice_idle)
+ if (!cic->ioc->task || !cfqd->cfq_slice_idle || cfqd->hw_tag)
enable_idle = 0;
else if (sample_valid(cic->ttime_samples)) {
if (cic->ttime_mean > cfqd->cfq_slice_idle)
@@ -1739,14 +1761,24 @@
cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq);
+ cic = crq->io_context;
+
/*
* we never wait for an async request and we don't allow preemption
* of an async request. so just return early
*/
- if (!cfq_crq_is_sync(crq))
+ if (!cfq_crq_is_sync(crq)) {
+ /*
+ * sync process issued an async request, if it's waiting
+ * then expire it and kick rq handling.
+ */
+ if (cic == cfqd->active_cic &&
+ del_timer(&cfqd->idle_slice_timer)) {
+ cfq_slice_expired(cfqd, 0);
+ cfq_start_queueing(cfqd, cfqq);
+ }
return;
-
- cic = crq->io_context;
+ }
cfq_update_io_thinktime(cfqd, cic);
cfq_update_io_seektime(cfqd, cic, crq);
@@ -2164,10 +2196,9 @@
* race with a non-idle queue, reset timer
*/
end = cfqd->last_end_request + CFQ_IDLE_GRACE;
- if (!time_after_eq(jiffies, end)) {
- cfqd->idle_class_timer.expires = end;
- add_timer(&cfqd->idle_class_timer);
- } else
+ if (!time_after_eq(jiffies, end))
+ mod_timer(&cfqd->idle_class_timer, end);
+ else
cfq_schedule_dispatch(cfqd);
spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
@@ -2187,7 +2218,7 @@
cfq_shutdown_timer_wq(cfqd);
- write_lock(&cfq_exit_lock);
+ spin_lock(&cfq_exit_lock);
spin_lock_irq(q->queue_lock);
if (cfqd->active_queue)
@@ -2210,7 +2241,7 @@
}
spin_unlock_irq(q->queue_lock);
- write_unlock(&cfq_exit_lock);
+ spin_unlock(&cfq_exit_lock);
cfq_shutdown_timer_wq(cfqd);
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index eac48be..7eb36c5 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -3452,7 +3452,12 @@
if (unlikely(laptop_mode) && blk_fs_request(req))
laptop_io_completion();
- if (disk && blk_fs_request(req)) {
+ /*
+ * Account IO completion. bar_rq isn't accounted as a normal
+ * IO on queueing nor completion. Accounting the containing
+ * request is enough.
+ */
+ if (disk && blk_fs_request(req) && req != &req->q->bar_rq) {
unsigned long duration = jiffies - req->start_time;
const int rw = rq_data_dir(req);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 4723182..0c99ae6 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -86,18 +86,9 @@
static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store);
static void fw_class_dev_release(struct class_device *class_dev);
-int firmware_class_uevent(struct class_device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size);
-static struct class firmware_class = {
- .name = "firmware",
- .uevent = firmware_class_uevent,
- .release = fw_class_dev_release,
-};
-
-int
-firmware_class_uevent(struct class_device *class_dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int firmware_class_uevent(struct class_device *class_dev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
{
struct firmware_priv *fw_priv = class_get_devdata(class_dev);
int i = 0, len = 0;
@@ -116,6 +107,12 @@
return 0;
}
+static struct class firmware_class = {
+ .name = "firmware",
+ .uevent = firmware_class_uevent,
+ .release = fw_class_dev_release,
+};
+
static ssize_t
firmware_loading_show(struct class_device *class_dev, char *buf)
{
@@ -493,25 +490,6 @@
}
}
-/**
- * register_firmware: - provide a firmware image for later usage
- * @name: name of firmware image file
- * @data: buffer pointer for the firmware image
- * @size: size of the data buffer area
- *
- * Make sure that @data will be available by requesting firmware @name.
- *
- * Note: This will not be possible until some kind of persistence
- * is available.
- **/
-void
-register_firmware(const char *name, const u8 *data, size_t size)
-{
- /* This is meaningless without firmware caching, so until we
- * decide if firmware caching is reasonable just leave it as a
- * noop */
-}
-
/* Async support */
struct firmware_work {
struct work_struct work;
@@ -630,4 +608,3 @@
EXPORT_SYMBOL(release_firmware);
EXPORT_SYMBOL(request_firmware);
EXPORT_SYMBOL(request_firmware_nowait);
-EXPORT_SYMBOL(register_firmware);
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index 662209d..2a769cc 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -8,7 +8,6 @@
*
*/
-#include <linux/vt_kern.h>
#include <linux/device.h>
#include <linux/kallsyms.h>
#include <linux/pm.h>
@@ -66,6 +65,7 @@
return error;
}
+
/**
* device_suspend - Save state and stop all devices in system.
* @state: Power state to put each device in.
@@ -85,9 +85,6 @@
{
int error = 0;
- if (!is_console_suspend_safe())
- return -EINVAL;
-
down(&dpm_sem);
down(&dpm_list_sem);
while (!list_empty(&dpm_active) && error == 0) {
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 0b9cf9c..7c88c06 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -86,7 +86,7 @@
config AGP_SIS
tristate "SiS chipset support"
- depends on AGP && X86_32
+ depends on AGP
help
This option gives you AGP support for the GLX component of
X on Silicon Integrated Systems [SiS] chipsets.
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 36517d4..ac3c33a 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -617,6 +617,9 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
+ nforce3_agp_init(pdev);
+
return amd_8151_configure();
}
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index 97b0a89..b8ec25d 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -345,6 +345,12 @@
.chipset_name = "PT880",
},
+ /* PT880 Ultra */
+ {
+ .device_id = PCI_DEVICE_ID_VIA_PT880ULTRA,
+ .chipset_name = "PT880 Ultra",
+ },
+
/* PT890 */
{
.device_id = PCI_DEVICE_ID_VIA_8783_0,
@@ -511,6 +517,7 @@
ID(PCI_DEVICE_ID_VIA_8763_0),
ID(PCI_DEVICE_ID_VIA_8378_0),
ID(PCI_DEVICE_ID_VIA_PT880),
+ ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
ID(PCI_DEVICE_ID_VIA_8783_0),
ID(PCI_DEVICE_ID_VIA_PX8X0_0),
ID(PCI_DEVICE_ID_VIA_3269_0),
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index b36eef0..02a7dd7 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1184,20 +1184,20 @@
static void port_cleanup(struct smi_info *info)
{
unsigned int addr = info->io.addr_data;
- int mapsize;
+ int idx;
if (addr) {
- mapsize = ((info->io_size * info->io.regspacing)
- - (info->io.regspacing - info->io.regsize));
-
- release_region (addr, mapsize);
+ for (idx = 0; idx < info->io_size; idx++) {
+ release_region(addr + idx * info->io.regspacing,
+ info->io.regsize);
+ }
}
}
static int port_setup(struct smi_info *info)
{
unsigned int addr = info->io.addr_data;
- int mapsize;
+ int idx;
if (!addr)
return -ENODEV;
@@ -1225,16 +1225,22 @@
return -EINVAL;
}
- /* Calculate the total amount of memory to claim. This is an
- * unusual looking calculation, but it avoids claiming any
- * more memory than it has to. It will claim everything
- * between the first address to the end of the last full
- * register. */
- mapsize = ((info->io_size * info->io.regspacing)
- - (info->io.regspacing - info->io.regsize));
-
- if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
- return -EIO;
+ /* Some BIOSes reserve disjoint I/O regions in their ACPI
+ * tables. This causes problems when trying to register the
+ * entire I/O region. Therefore we must register each I/O
+ * port separately.
+ */
+ for (idx = 0; idx < info->io_size; idx++) {
+ if (request_region(addr + idx * info->io.regspacing,
+ info->io.regsize, DEVICE_NAME) == NULL) {
+ /* Undo allocations */
+ while (idx--) {
+ release_region(addr + idx * info->io.regspacing,
+ info->io.regsize);
+ }
+ return -EIO;
+ }
+ }
return 0;
}
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index e45f0d3..a611972 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -105,6 +105,12 @@
"Non-Host Info"
};
+struct tcpa_pc_event {
+ u32 event_id;
+ u32 event_size;
+ u8 event_data[0];
+};
+
enum tcpa_pc_event_ids {
SMBIOS = 1,
BIS_CERT,
@@ -114,14 +120,15 @@
NVRAM,
OPTION_ROM_EXEC,
OPTION_ROM_CONFIG,
- OPTION_ROM_MICROCODE,
+ OPTION_ROM_MICROCODE = 10,
S_CRTM_VERSION,
S_CRTM_CONTENTS,
POST_CONTENTS,
+ HOST_TABLE_OF_DEVICES,
};
static const char* tcpa_pc_event_id_strings[] = {
- ""
+ "",
"SMBIOS",
"BIS Certificate",
"POST BIOS ",
@@ -130,11 +137,12 @@
"NVRAM",
"Option ROM",
"Option ROM config",
- "Option ROM microcode",
+ "",
+ "Option ROM microcode ",
"S-CRTM Version",
- "S-CRTM Contents",
- "S-CRTM POST Contents",
- "POST Contents",
+ "S-CRTM Contents ",
+ "POST Contents ",
+ "Table of Devices",
};
/* returns pointer to start of pos. entry of tcg log */
@@ -206,7 +214,7 @@
const char *name = "";
char data[40] = "";
int i, n_len = 0, d_len = 0;
- u32 event_id;
+ struct tcpa_pc_event *pc_event;
switch(event->event_type) {
case PREBOOT:
@@ -235,31 +243,32 @@
}
break;
case EVENT_TAG:
- event_id = be32_to_cpu(*((u32 *)event_entry));
+ pc_event = (struct tcpa_pc_event *)event_entry;
/* ToDo Row data -> Base64 */
- switch (event_id) {
+ switch (pc_event->event_id) {
case SMBIOS:
case BIS_CERT:
case CMOS:
case NVRAM:
case OPTION_ROM_EXEC:
case OPTION_ROM_CONFIG:
- case OPTION_ROM_MICROCODE:
case S_CRTM_VERSION:
- case S_CRTM_CONTENTS:
- case POST_CONTENTS:
- name = tcpa_pc_event_id_strings[event_id];
+ name = tcpa_pc_event_id_strings[pc_event->event_id];
n_len = strlen(name);
break;
+ /* hash data */
case POST_BIOS_ROM:
case ESCD:
- name = tcpa_pc_event_id_strings[event_id];
+ case OPTION_ROM_MICROCODE:
+ case S_CRTM_CONTENTS:
+ case POST_CONTENTS:
+ name = tcpa_pc_event_id_strings[pc_event->event_id];
n_len = strlen(name);
for (i = 0; i < 20; i++)
- d_len += sprintf(data, "%02x",
- event_entry[8 + i]);
+ d_len += sprintf(&data[2*i], "%02x",
+ pc_event->event_data[i]);
break;
default:
break;
@@ -275,53 +284,13 @@
static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
{
+ struct tcpa_event *event = v;
+ char *data = v;
+ int i;
- char *eventname;
- char data[4];
- u32 help;
- int i, len;
- struct tcpa_event *event = (struct tcpa_event *) v;
- unsigned char *event_entry =
- (unsigned char *) (v + sizeof(struct tcpa_event));
-
- eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
- if (!eventname) {
- printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
- __func__);
- return -ENOMEM;
- }
-
- /* 1st: PCR used is in little-endian format (4 bytes) */
- help = le32_to_cpu(event->pcr_index);
- memcpy(data, &help, 4);
- for (i = 0; i < 4; i++)
+ for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++)
seq_putc(m, data[i]);
- /* 2nd: SHA1 (20 bytes) */
- for (i = 0; i < 20; i++)
- seq_putc(m, event->pcr_value[i]);
-
- /* 3rd: event type identifier (4 bytes) */
- help = le32_to_cpu(event->event_type);
- memcpy(data, &help, 4);
- for (i = 0; i < 4; i++)
- seq_putc(m, data[i]);
-
- len = 0;
-
- len += get_event_name(eventname, event, event_entry);
-
- /* 4th: filename <= 255 + \'0' delimiter */
- if (len > TCG_EVENT_NAME_LEN_MAX)
- len = TCG_EVENT_NAME_LEN_MAX;
-
- for (i = 0; i < len; i++)
- seq_putc(m, eventname[i]);
-
- /* 5th: delimiter */
- seq_putc(m, '\0');
-
- kfree(eventname);
return 0;
}
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index f621168..8ea7062 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -457,10 +457,6 @@
}
vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
- if ((vendor & 0xFFFF) == 0xFFFF) {
- rc = -ENODEV;
- goto out_err;
- }
/* Default timeouts */
chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f07637a..a88b94a 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -398,7 +398,7 @@
while (unlikely(size > copied));
return copied;
}
-EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
void tty_schedule_flip(struct tty_struct *tty)
{
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index acc5d47..6c94879 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -3238,14 +3238,6 @@
}
}
-int is_console_suspend_safe(void)
-{
- /* It is unsafe to suspend devices while X has control of the
- * hardware. Make sure we are running on a kernel-controlled console.
- */
- return vc_cons[fg_console].d->vc_mode == KD_TEXT;
-}
-
/*
* Visible symbols for modules
*/
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index a13395e..fa2ba9e 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -33,11 +33,6 @@
* 82801E (C-ICH) : document number 273599-001, 273645-002,
* 82801EB (ICH5) : document number 252516-001, 252517-003,
* 82801ER (ICH5R) : document number 252516-001, 252517-003,
- * 82801FB (ICH6) : document number 301473-002, 301474-007,
- * 82801FR (ICH6R) : document number 301473-002, 301474-007,
- * 82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- * 82801FW (ICH6W) : document number 301473-001, 301474-007,
- * 82801FRW (ICH6RW) : document number 301473-001, 301474-007
*
* 20000710 Nils Faerber
* Initial Version 0.01
@@ -66,6 +61,10 @@
* 20050807 Wim Van Sebroeck <wim@iguana.be>
* 0.08 Make sure that the watchdog is only "armed" when started.
* (Kernel Bug 4251)
+ * 20060416 Wim Van Sebroeck <wim@iguana.be>
+ * 0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ * ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ * chipsets)
*/
/*
@@ -90,7 +89,7 @@
#include "i8xx_tco.h"
/* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
#define TCO_MODULE_NAME "i8xx TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
#define PFX TCO_MODULE_NAME ": "
@@ -391,11 +390,6 @@
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }, /* End of list */
};
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 9dc5473..1ea04e9 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -423,6 +423,12 @@
if (tmr_atboot && started == 0) {
printk(KERN_INFO PFX "Starting Watchdog Timer\n");
s3c2410wdt_start();
+ } else if (!tmr_atboot) {
+ /* if we're not enabling the watchdog, then ensure it is
+ * disabled if it has been left running from the bootloader
+ * or other source */
+
+ s3c2410wdt_stop();
}
return 0;
diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c
index 515ce75..20b88f9 100644
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@@ -377,7 +377,7 @@
{
int ret;
- printk(banner);
+ printk("%s\n", banner);
spin_lock_init(&sc1200wdt_lock);
sema_init(&open_sem, 1);
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index a140e45..766cc96 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -491,7 +491,7 @@
#define MSR_LBAR_SMB 0x5140000B
-static int scx200_add_cs553x(void)
+static __init int scx200_add_cs553x(void)
{
u32 low, hi;
u32 smb_base;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 43b96e2..27c9eb9 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -345,17 +345,17 @@
static u8
sgiioc4_INB(unsigned long port)
{
- u8 reg = (u8) inb(port);
+ u8 reg = (u8) readb((void __iomem *) port);
if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
if (reg & 0x51) { /* Not busy...check for interrupt */
unsigned long other_ir = port - 0x110;
- unsigned int intr_reg = (u32) inl(other_ir);
+ unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
/* Clear the Interrupt, Error bits on the IOC4 */
if (intr_reg & 0x03) {
- outl(0x03, other_ir);
- intr_reg = (u32) inl(other_ir);
+ writel(0x03, (void __iomem *) other_ir);
+ intr_reg = (u32) readl((void __iomem *) other_ir);
}
}
}
@@ -606,6 +606,12 @@
hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
hwif->ide_dma_timeout = &__ide_dma_timeout;
+
+ /*
+ * The IOC4 uses MMIO rather than Port IO.
+ * It also needs special workarounds for INB.
+ */
+ default_hwif_mmiops(hwif);
hwif->INB = &sgiioc4_INB;
}
@@ -743,6 +749,6 @@
module_init(ioc4_ide_init);
module_exit(ioc4_ide_exit);
-MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
+MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78e30f8..ffca8b6 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -553,6 +553,8 @@
if (irq != NULL)
*irq = pmac_ide[ix].irq;
+
+ hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
}
#define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c
index 36a32c3..efe147d 100644
--- a/drivers/infiniband/core/uverbs_mem.c
+++ b/drivers/infiniband/core/uverbs_mem.c
@@ -211,8 +211,10 @@
*/
work = kmalloc(sizeof *work, GFP_KERNEL);
- if (!work)
+ if (!work) {
+ mmput(mm);
return;
+ }
INIT_WORK(&work->work, ib_umem_account, work);
work->mm = mm;
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 3697eda..dddcdae 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1905,19 +1905,19 @@
} else
ipath_dbg("irq is 0, not doing free_irq "
"for unit %u\n", dd->ipath_unit);
+
+ /*
+ * we check for NULL here, because it's outside
+ * the kregbase check, and we need to call it
+ * after the free_irq. Thus it's possible that
+ * the function pointers were never initialized.
+ */
+ if (dd->ipath_f_cleanup)
+ /* clean up chip-specific stuff */
+ dd->ipath_f_cleanup(dd);
+
dd->pcidev = NULL;
}
-
- /*
- * we check for NULL here, because it's outside the kregbase
- * check, and we need to call it after the free_irq. Thus
- * it's possible that the function pointers were never
- * initialized.
- */
- if (dd->ipath_f_cleanup)
- /* clean up chip-specific stuff */
- dd->ipath_f_cleanup(dd);
-
spin_lock_irqsave(&ipath_devs_lock, flags);
}
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index f11a900e..a2f1cea 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -505,11 +505,10 @@
* ipath_get_guid - get the GUID from the i2c device
* @dd: the infinipath device
*
- * When we add the multi-chip support, we will probably have to add
- * the ability to use the number of guids field, and get the guid from
- * the first chip's flash, to use for all of them.
+ * We have the capability to use the ipath_nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
*/
-void ipath_get_guid(struct ipath_devdata *dd)
+void ipath_get_eeprom_info(struct ipath_devdata *dd)
{
void *buf;
struct ipath_flash *ifp;
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index c347191..ada267e4 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -139,7 +139,7 @@
kinfo->spi_piosize = dd->ipath_ibmaxlen;
kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
kinfo->spi_port = pd->port_port;
- kinfo->spi_sw_version = IPATH_USER_SWVERSION;
+ kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
kinfo->spi_hw_version = dd->ipath_revision;
if (copy_to_user(ubase, kinfo, sizeof(*kinfo)))
@@ -1224,6 +1224,10 @@
if (tail == head) {
set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
+ if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
+ (void)ipath_write_ureg(dd, ur_rcvhdrhead,
+ dd->ipath_rhdrhead_intr_off
+ | head, pd->port_port);
poll_wait(fp, &pd->port_wait, pt);
if (test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {
diff --git a/drivers/infiniband/hw/ipath/ipath_ht400.c b/drivers/infiniband/hw/ipath/ipath_ht400.c
index 4652435..fac0a2b 100644
--- a/drivers/infiniband/hw/ipath/ipath_ht400.c
+++ b/drivers/infiniband/hw/ipath/ipath_ht400.c
@@ -607,7 +607,12 @@
case 4: /* Ponderosa is one of the bringup boards */
n = "Ponderosa";
break;
- case 5: /* HT-460 original production board */
+ case 5:
+ /*
+ * HT-460 original production board; two production levels, with
+ * different serial number ranges. See ipath_ht_early_init() for
+ * case where we enable IPATH_GPIO_INTR for later serial # range.
+ */
n = "InfiniPath_HT-460";
break;
case 6:
@@ -642,7 +647,7 @@
if (n)
snprintf(name, namelen, "%s", n);
- if (dd->ipath_majrev != 3 || dd->ipath_minrev != 2) {
+ if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
/*
* This version of the driver only supports the HT-400
* Rev 3.2
@@ -1520,6 +1525,18 @@
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
INFINIPATH_S_ABORT);
+
+ ipath_get_eeprom_info(dd);
+ if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
+ dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
+ /*
+ * Later production HT-460 has same changes as HT-465, so
+ * can use GPIO interrupts. They have serial #'s starting
+ * with 128, rather than 112.
+ */
+ dd->ipath_flags |= IPATH_GPIO_INTR;
+ dd->ipath_flags &= ~IPATH_POLL_RX_INTR;
+ }
return 0;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 16f640e..dc83250 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -879,7 +879,6 @@
done:
if (!ret) {
- ipath_get_guid(dd);
*dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
if (!dd->ipath_f_intrsetup(dd)) {
/* now we can enable all interrupts from the chip */
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index e6507f8..5d92d57 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -650,7 +650,7 @@
void ipath_init_pe800_funcs(struct ipath_devdata *);
/* init HT-400-specific func */
void ipath_init_ht400_funcs(struct ipath_devdata *);
-void ipath_get_guid(struct ipath_devdata *);
+void ipath_get_eeprom_info(struct ipath_devdata *);
u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_keys.c b/drivers/infiniband/hw/ipath/ipath_keys.c
index aa33b0e..5ae8761 100644
--- a/drivers/infiniband/hw/ipath/ipath_keys.c
+++ b/drivers/infiniband/hw/ipath/ipath_keys.c
@@ -136,9 +136,7 @@
ret = 1;
goto bail;
}
- spin_lock(&rkt->lock);
mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
- spin_unlock(&rkt->lock);
if (unlikely(mr == NULL || mr->lkey != sge->lkey)) {
ret = 0;
goto bail;
@@ -184,8 +182,6 @@
* @acc: access flags
*
* Return 1 if successful, otherwise 0.
- *
- * The QP r_rq.lock should be held.
*/
int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
u32 len, u64 vaddr, u32 rkey, int acc)
@@ -196,9 +192,7 @@
size_t off;
int ret;
- spin_lock(&rkt->lock);
mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
- spin_unlock(&rkt->lock);
if (unlikely(mr == NULL || mr->lkey != rkey)) {
ret = 0;
goto bail;
diff --git a/drivers/infiniband/hw/ipath/ipath_layer.c b/drivers/infiniband/hw/ipath/ipath_layer.c
index 9cb5258..9ec4ac7 100644
--- a/drivers/infiniband/hw/ipath/ipath_layer.c
+++ b/drivers/infiniband/hw/ipath/ipath_layer.c
@@ -872,12 +872,13 @@
update_sge(ss, len);
length -= len;
}
+ /* Update address before sending packet. */
+ update_sge(ss, length);
/* must flush early everything before trigger word */
ipath_flush_wc();
__raw_writel(last, piobuf);
/* be sure trigger word is written */
ipath_flush_wc();
- update_sge(ss, length);
}
/**
@@ -943,17 +944,18 @@
if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
!((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
u32 w;
+ u32 *addr = (u32 *) ss->sge.vaddr;
+ /* Update address before sending packet. */
+ update_sge(ss, len);
/* Need to round up for the last dword in the packet. */
w = (len + 3) >> 2;
- __iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
+ __iowrite32_copy(piobuf, addr, w - 1);
/* must flush early everything before trigger word */
ipath_flush_wc();
- __raw_writel(((u32 *) ss->sge.vaddr)[w - 1],
- piobuf + w - 1);
+ __raw_writel(addr[w - 1], piobuf + w - 1);
/* be sure trigger word is written */
ipath_flush_wc();
- update_sge(ss, len);
ret = 0;
goto bail;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_pe800.c b/drivers/infiniband/hw/ipath/ipath_pe800.c
index 6318067..02e8c75 100644
--- a/drivers/infiniband/hw/ipath/ipath_pe800.c
+++ b/drivers/infiniband/hw/ipath/ipath_pe800.c
@@ -1180,6 +1180,8 @@
*/
dd->ipath_rhdrhead_intr_off = 1ULL<<32;
+ ipath_get_eeprom_info(dd);
+
return 0;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index 1889071..9f8855d9 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -375,10 +375,10 @@
spin_lock(&dev->pending_lock);
/* XXX What if its already removed by the timeout code? */
- if (qp->timerwait.next != LIST_POISON1)
- list_del(&qp->timerwait);
- if (qp->piowait.next != LIST_POISON1)
- list_del(&qp->piowait);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
spin_unlock(&dev->pending_lock);
wc.status = IB_WC_WR_FLUSH_ERR;
@@ -427,6 +427,7 @@
int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask)
{
+ struct ipath_ibdev *dev = to_idev(ibqp->device);
struct ipath_qp *qp = to_iqp(ibqp);
enum ib_qp_state cur_state, new_state;
unsigned long flags;
@@ -443,6 +444,19 @@
attr_mask))
goto inval;
+ if (attr_mask & IB_QP_AV)
+ if (attr->ah_attr.dlid == 0 ||
+ attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
+ goto inval;
+
+ if (attr_mask & IB_QP_PKEY_INDEX)
+ if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
+ goto inval;
+
+ if (attr_mask & IB_QP_MIN_RNR_TIMER)
+ if (attr->min_rnr_timer > 31)
+ goto inval;
+
switch (new_state) {
case IB_QPS_RESET:
ipath_reset_qp(qp);
@@ -457,13 +471,8 @@
}
- if (attr_mask & IB_QP_PKEY_INDEX) {
- struct ipath_ibdev *dev = to_idev(ibqp->device);
-
- if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
- goto inval;
+ if (attr_mask & IB_QP_PKEY_INDEX)
qp->s_pkey_index = attr->pkey_index;
- }
if (attr_mask & IB_QP_DEST_QPN)
qp->remote_qpn = attr->dest_qp_num;
@@ -479,12 +488,8 @@
if (attr_mask & IB_QP_ACCESS_FLAGS)
qp->qp_access_flags = attr->qp_access_flags;
- if (attr_mask & IB_QP_AV) {
- if (attr->ah_attr.dlid == 0 ||
- attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
- goto inval;
+ if (attr_mask & IB_QP_AV)
qp->remote_ah_attr = attr->ah_attr;
- }
if (attr_mask & IB_QP_PATH_MTU)
qp->path_mtu = attr->path_mtu;
@@ -499,11 +504,8 @@
qp->s_rnr_retry_cnt = qp->s_rnr_retry;
}
- if (attr_mask & IB_QP_MIN_RNR_TIMER) {
- if (attr->min_rnr_timer > 31)
- goto inval;
+ if (attr_mask & IB_QP_MIN_RNR_TIMER)
qp->s_min_rnr_timer = attr->min_rnr_timer;
- }
if (attr_mask & IB_QP_QKEY)
qp->qkey = attr->qkey;
@@ -710,10 +712,8 @@
init_attr->qp_type == IB_QPT_RC ?
ipath_do_rc_send : ipath_do_uc_send,
(unsigned long)qp);
- qp->piowait.next = LIST_POISON1;
- qp->piowait.prev = LIST_POISON2;
- qp->timerwait.next = LIST_POISON1;
- qp->timerwait.prev = LIST_POISON2;
+ INIT_LIST_HEAD(&qp->piowait);
+ INIT_LIST_HEAD(&qp->timerwait);
qp->state = IB_QPS_RESET;
qp->s_wq = swq;
qp->s_size = init_attr->cap.max_send_wr + 1;
@@ -734,7 +734,7 @@
ipath_reset_qp(qp);
/* Tell the core driver that the kernel SMA is present. */
- if (qp->ibqp.qp_type == IB_QPT_SMI)
+ if (init_attr->qp_type == IB_QPT_SMI)
ipath_layer_set_verbs_flags(dev->dd,
IPATH_VERBS_KERNEL_SMA);
break;
@@ -783,10 +783,10 @@
/* Make sure the QP isn't on the timeout list. */
spin_lock_irqsave(&dev->pending_lock, flags);
- if (qp->timerwait.next != LIST_POISON1)
- list_del(&qp->timerwait);
- if (qp->piowait.next != LIST_POISON1)
- list_del(&qp->piowait);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
spin_unlock_irqrestore(&dev->pending_lock, flags);
/*
@@ -855,10 +855,10 @@
spin_lock(&dev->pending_lock);
/* XXX What if its already removed by the timeout code? */
- if (qp->timerwait.next != LIST_POISON1)
- list_del(&qp->timerwait);
- if (qp->piowait.next != LIST_POISON1)
- list_del(&qp->piowait);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
spin_unlock(&dev->pending_lock);
ipath_cq_enter(to_icq(qp->ibqp.send_cq), wc, 1);
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index a4055ca..493b182 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -57,7 +57,7 @@
qp->s_len = wqe->length - len;
dev = to_idev(qp->ibqp.device);
spin_lock(&dev->pending_lock);
- if (qp->timerwait.next == LIST_POISON1)
+ if (list_empty(&qp->timerwait))
list_add_tail(&qp->timerwait,
&dev->pending[dev->pending_index]);
spin_unlock(&dev->pending_lock);
@@ -356,7 +356,7 @@
if ((int)(qp->s_psn - qp->s_next_psn) > 0)
qp->s_next_psn = qp->s_psn;
spin_lock(&dev->pending_lock);
- if (qp->timerwait.next == LIST_POISON1)
+ if (list_empty(&qp->timerwait))
list_add_tail(&qp->timerwait,
&dev->pending[dev->pending_index]);
spin_unlock(&dev->pending_lock);
@@ -726,8 +726,8 @@
*/
dev = to_idev(qp->ibqp.device);
spin_lock(&dev->pending_lock);
- if (qp->timerwait.next != LIST_POISON1)
- list_del(&qp->timerwait);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
spin_unlock(&dev->pending_lock);
if (wqe->wr.opcode == IB_WR_RDMA_READ)
@@ -886,8 +886,8 @@
* just won't find anything to restart if we ACK everything.
*/
spin_lock(&dev->pending_lock);
- if (qp->timerwait.next != LIST_POISON1)
- list_del(&qp->timerwait);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
spin_unlock(&dev->pending_lock);
/*
@@ -1194,8 +1194,7 @@
IB_WR_RDMA_READ))
goto ack_done;
spin_lock(&dev->pending_lock);
- if (qp->s_rnr_timeout == 0 &&
- qp->timerwait.next != LIST_POISON1)
+ if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
list_move_tail(&qp->timerwait,
&dev->pending[dev->pending_index]);
spin_unlock(&dev->pending_lock);
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index eb81424..d38f4f3 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -435,7 +435,7 @@
unsigned long flags;
spin_lock_irqsave(&dev->pending_lock, flags);
- if (qp->piowait.next == LIST_POISON1)
+ if (list_empty(&qp->piowait))
list_add_tail(&qp->piowait, &dev->piowait);
spin_unlock_irqrestore(&dev->pending_lock, flags);
/*
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index cb9e387..28fdbda 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -464,7 +464,7 @@
last = &dev->pending[dev->pending_index];
while (!list_empty(last)) {
qp = list_entry(last->next, struct ipath_qp, timerwait);
- list_del(&qp->timerwait);
+ list_del_init(&qp->timerwait);
qp->timer_next = resend;
resend = qp;
atomic_inc(&qp->refcount);
@@ -474,7 +474,7 @@
qp = list_entry(last->next, struct ipath_qp, timerwait);
if (--qp->s_rnr_timeout == 0) {
do {
- list_del(&qp->timerwait);
+ list_del_init(&qp->timerwait);
tasklet_hi_schedule(&qp->s_task);
if (list_empty(last))
break;
@@ -554,7 +554,7 @@
while (!list_empty(&dev->piowait)) {
qp = list_entry(dev->piowait.next, struct ipath_qp,
piowait);
- list_del(&qp->piowait);
+ list_del_init(&qp->piowait);
tasklet_hi_schedule(&qp->s_task);
}
spin_unlock_irqrestore(&dev->pending_lock, flags);
@@ -951,6 +951,7 @@
idev->dd = dd;
strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
+ dev->owner = THIS_MODULE;
dev->node_guid = ipath_layer_get_guid(dd);
dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
dev->uverbs_cmd_mask =
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 1985b5d..798e13e 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -182,7 +182,7 @@
u8 status;
};
-static int fw_cmd_doorbell = 1;
+static int fw_cmd_doorbell = 0;
module_param(fw_cmd_doorbell, int, 0644);
MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
"(and supported by FW)");
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 19765f6..07c13be 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -1727,23 +1727,7 @@
ind = qp->rq.next_ind;
- for (nreq = 0; wr; ++nreq, wr = wr->next) {
- if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
- nreq = 0;
-
- doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
- doorbell[1] = cpu_to_be32(qp->qpn << 8);
-
- wmb();
-
- mthca_write64(doorbell,
- dev->kar + MTHCA_RECEIVE_DOORBELL,
- MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
- qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
- size0 = 0;
- }
-
+ for (nreq = 0; wr; wr = wr->next) {
if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
mthca_err(dev, "RQ %06x full (%u head, %u tail,"
" %d max, %d nreq)\n", qp->qpn,
@@ -1797,6 +1781,23 @@
++ind;
if (unlikely(ind >= qp->rq.max))
ind -= qp->rq.max;
+
+ ++nreq;
+ if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+ nreq = 0;
+
+ doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
+ doorbell[1] = cpu_to_be32(qp->qpn << 8);
+
+ wmb();
+
+ mthca_write64(doorbell,
+ dev->kar + MTHCA_RECEIVE_DOORBELL,
+ MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+ qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
+ size0 = 0;
+ }
}
out:
diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c
index 1ea4332..b292fef 100644
--- a/drivers/infiniband/hw/mthca/mthca_srq.c
+++ b/drivers/infiniband/hw/mthca/mthca_srq.c
@@ -490,26 +490,7 @@
first_ind = srq->first_free;
- for (nreq = 0; wr; ++nreq, wr = wr->next) {
- if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
- nreq = 0;
-
- doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
- doorbell[1] = cpu_to_be32(srq->srqn << 8);
-
- /*
- * Make sure that descriptors are written
- * before doorbell is rung.
- */
- wmb();
-
- mthca_write64(doorbell,
- dev->kar + MTHCA_RECEIVE_DOORBELL,
- MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
- first_ind = srq->first_free;
- }
-
+ for (nreq = 0; wr; wr = wr->next) {
ind = srq->first_free;
if (ind < 0) {
@@ -569,6 +550,26 @@
srq->wrid[ind] = wr->wr_id;
srq->first_free = next_ind;
+
+ ++nreq;
+ if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+ nreq = 0;
+
+ doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
+ doorbell[1] = cpu_to_be32(srq->srqn << 8);
+
+ /*
+ * Make sure that descriptors are written
+ * before doorbell is rung.
+ */
+ wmb();
+
+ mthca_write64(doorbell,
+ dev->kar + MTHCA_RECEIVE_DOORBELL,
+ MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+ first_ind = srq->first_free;
+ }
}
if (likely(nreq)) {
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index c32ce43..9cbdffa 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -340,7 +340,10 @@
/* XXX should send SRP_I_LOGOUT request */
init_completion(&target->done);
- ib_send_cm_dreq(target->cm_id, NULL, 0);
+ if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+ printk(KERN_DEBUG PFX "Sending CM DREQ failed\n");
+ return;
+ }
wait_for_completion(&target->done);
}
@@ -351,7 +354,6 @@
spin_lock_irq(target->scsi_host->host_lock);
if (target->state != SRP_TARGET_DEAD) {
spin_unlock_irq(target->scsi_host->host_lock);
- scsi_host_put(target->scsi_host);
return;
}
target->state = SRP_TARGET_REMOVED;
@@ -365,8 +367,6 @@
ib_destroy_cm_id(target->cm_id);
srp_free_target_ib(target);
scsi_host_put(target->scsi_host);
- /* And another put to really free the target port... */
- scsi_host_put(target->scsi_host);
}
static int srp_connect_target(struct srp_target_port *target)
@@ -1241,7 +1241,7 @@
list_for_each_entry_safe(req, tmp, &target->req_queue, list)
if (req->scmnd->device == scmnd->device) {
req->scmnd->result = DID_RESET << 16;
- scmnd->scsi_done(scmnd);
+ req->scmnd->scsi_done(req->scmnd);
srp_remove_req(target, req);
}
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index 2b2ec10..95c0de7 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -589,7 +589,7 @@
struct sw *sw;
struct input_dev *input_dev;
int i, j, k, l;
- int err;
+ int err = 0;
unsigned char *buf = NULL; /* [SW_LENGTH] */
unsigned char *idbuf = NULL; /* [SW_LENGTH] */
unsigned char m = 1;
@@ -776,7 +776,10 @@
goto fail4;
}
- return 0;
+ out: kfree(buf);
+ kfree(idbuf);
+
+ return err;
fail4: input_free_device(sw->dev[i]);
fail3: while (--i >= 0)
@@ -784,9 +787,7 @@
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
kfree(sw);
- kfree(buf);
- kfree(idbuf);
- return err;
+ goto out;
}
static void sw_disconnect(struct gameport *gameport)
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 96c6bf7..1f0e720 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -245,9 +245,9 @@
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&corgikbd_data->lock, flags);
- input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
- input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
- input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
+ input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+ input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+ input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
input_sync(corgikbd_data->input);
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
@@ -340,9 +340,9 @@
for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
set_bit(corgikbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
- set_bit(SW_0, input_dev->swbit);
- set_bit(SW_1, input_dev->swbit);
- set_bit(SW_2, input_dev->swbit);
+ set_bit(SW_LID, input_dev->swbit);
+ set_bit(SW_TABLET_MODE, input_dev->swbit);
+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
input_register_device(corgikbd->input);
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 1d238a9..c5d03fb 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -299,9 +299,9 @@
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
- input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
- input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
input_sync(spitzkbd_data->input);
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
@@ -398,9 +398,9 @@
for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
set_bit(spitzkbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
- set_bit(SW_0, input_dev->swbit);
- set_bit(SW_1, input_dev->swbit);
- set_bit(SW_2, input_dev->swbit);
+ set_bit(SW_LID, input_dev->swbit);
+ set_bit(SW_TABLET_MODE, input_dev->swbit);
+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
input_register_device(input_dev);
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 36cd2e0..e4e5be1 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -318,6 +318,16 @@
{ KE_END, 0 }
};
+static struct key_entry keymap_aopen_1559as[] = {
+ { KE_KEY, 0x01, KEY_HELP },
+ { KE_KEY, 0x06, KEY_PROG3 },
+ { KE_KEY, 0x11, KEY_PROG1 },
+ { KE_KEY, 0x12, KEY_PROG2 },
+ { KE_WIFI, 0x30, 0 },
+ { KE_KEY, 0x31, KEY_MAIL },
+ { KE_KEY, 0x36, KEY_WWW },
+};
+
/*
* If your machine is not here (which is currently rather likely), please send
* a list of buttons and their key codes (reported when loading this module
@@ -369,6 +379,15 @@
},
.driver_data = keymap_acer_travelmate_240
},
+ {
+ .callback = dmi_matched,
+ .ident = "AOpen 1559AS",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
+ DMI_MATCH(DMI_BOARD_NAME, "E2U"),
+ },
+ .driver_data = keymap_aopen_1559as
+ },
{ NULL, }
};
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 2141501..a0e2e79 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -100,8 +100,8 @@
}
if (priv->i->flags & ALPS_OLDPROTO) {
- left = packet[2] & 0x08;
- right = packet[2] & 0x10;
+ left = packet[2] & 0x10;
+ right = packet[2] & 0x08;
middle = 0;
x = packet[1] | ((packet[0] & 0x07) << 7);
y = packet[4] | ((packet[3] & 0x07) << 7);
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 5ccc3ef..c14395b 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -22,12 +22,36 @@
static struct dmi_system_id lifebook_dmi_table[] = {
{
+ .ident = "LifeBook B",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
+ },
+ },
+ {
.ident = "Lifebook B",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
{
+ .ident = "Lifebook B213x/B2150",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
+ },
+ },
+ {
+ .ident = "Zephyr",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
+ },
+ },
+ {
+ .ident = "CF-18",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+ },
+ },
+ {
.ident = "Lifebook B142",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 40333d6..2f0d288 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -19,6 +19,7 @@
#define PS2PP_KIND_WHEEL 1
#define PS2PP_KIND_MX 2
#define PS2PP_KIND_TP3 3
+#define PS2PP_KIND_TRACKMAN 4
/* Logitech mouse features */
#define PS2PP_WHEEL 0x01
@@ -223,6 +224,7 @@
{ 73, 0, PS2PP_SIDE_BTN },
{ 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
+ { 79, PS2PP_KIND_TRACKMAN, PS2PP_WHEEL }, /* TrackMan with wheel */
{ 80, PS2PP_KIND_WHEEL, PS2PP_SIDE_BTN | PS2PP_WHEEL },
{ 81, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 83, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
@@ -298,6 +300,10 @@
psmouse->name = "TouchPad 3";
break;
+ case PS2PP_KIND_TRACKMAN:
+ psmouse->name = "TrackMan";
+ break;
+
default:
/*
* Set name to "Mouse" only when using PS2++,
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 1494175..161afdd 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -36,13 +36,10 @@
/*
- * This code has been tested on an ads7846 / N770 device.
+ * This code has been heavily tested on a Nokia 770, and lightly
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock).
* Support for ads7843 and ads7845 has only been stubbed in.
*
- * Not yet done: How accurate are the temperature and voltage
- * readings? (System-specific calibration should support
- * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
- *
* IRQ handling needs a workaround because of a shortcoming in handling
* edge triggered IRQs on some platforms like the OMAP1/2. These
* platforms don't handle the ARM lazy IRQ disabling properly, thus we
@@ -248,10 +245,13 @@
if (req->msg.status)
status = req->msg.status;
- sample = be16_to_cpu(req->sample);
- sample = sample >> 4;
- kfree(req);
+ /* on-wire is a must-ignore bit, a BE12 value, then padding */
+ sample = be16_to_cpu(req->sample);
+ sample = sample >> 3;
+ sample &= 0x0fff;
+
+ kfree(req);
return status ? status : sample;
}
@@ -336,13 +336,13 @@
u16 x, y, z1, z2;
unsigned long flags;
- /* adjust: 12 bit samples (left aligned), built from
- * two 8 bit values writen msb-first.
+ /* adjust: on-wire is a must-ignore bit, a BE12 value, then padding;
+ * built from two 8 bit values written msb-first.
*/
- x = be16_to_cpu(ts->tc.x) >> 4;
- y = be16_to_cpu(ts->tc.y) >> 4;
- z1 = be16_to_cpu(ts->tc.z1) >> 4;
- z2 = be16_to_cpu(ts->tc.z2) >> 4;
+ x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
+ y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
+ z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
+ z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
/* range filtering */
if (x == MAX_12BIT)
@@ -420,7 +420,7 @@
m = &ts->msg[ts->msg_idx];
t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
- val = (*(u16 *)t->rx_buf) >> 3;
+ val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
/* Repeat it, if this was the first read or the read
* wasn't consistent enough. */
@@ -469,7 +469,7 @@
spin_lock_irq(&ts->lock);
if (unlikely(ts->msg_idx && !ts->pendown)) {
- /* measurment cycle ended */
+ /* measurement cycle ended */
if (!device_suspended(&ts->spi->dev)) {
ts->irq_disabled = 0;
enable_irq(ts->spi->irq);
@@ -495,11 +495,10 @@
spin_lock_irqsave(&ts->lock, flags);
if (likely(ts->get_pendown_state())) {
if (!ts->irq_disabled) {
- /* REVISIT irq logic for many ARM chips has cloned a
- * bug wherein disabling an irq in its handler won't
- * work;(it's disabled lazily, and too late to work.
- * until all their irq logic is fixed, we must shadow
- * that state here.
+ /* The ARM do_simple_IRQ() dispatcher doesn't act
+ * like the other dispatchers: it will report IRQs
+ * even after they've been disabled. We work around
+ * that here. (The "generic irq" framework may help...)
*/
ts->irq_disabled = 1;
disable_irq(ts->spi->irq);
@@ -609,16 +608,20 @@
return -EINVAL;
}
+ /* REVISIT when the irq can be triggered active-low, or if for some
+ * reason the touchscreen isn't hooked up, we don't need to access
+ * the pendown state.
+ */
if (pdata->get_pendown_state == NULL) {
dev_dbg(&spi->dev, "no get_pendown_state function?\n");
return -EINVAL;
}
- /* We'd set the wordsize to 12 bits ... except that some controllers
- * will then treat the 8 bit command words as 12 bits (and drop the
- * four MSBs of the 12 bit result). Result: inputs must be shifted
- * to discard the four garbage LSBs.
+ /* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
+ * that even if the hardware can do that, the SPI controller driver
+ * may not. So we stick to very-portable 8 bit words, both RX and TX.
*/
+ spi->bits_per_word = 8;
ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -772,7 +775,7 @@
if (request_irq(spi->irq, ads7846_irq,
SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
- spi->dev.bus_id, ts)) {
+ spi->dev.driver->name, ts)) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
err = -EBUSY;
goto err_free_mem;
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3585fb1..2ac9024 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -2880,7 +2880,7 @@
p[0]++;
i = 0;
while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
- (i < ISDN_LMSNLEN))
+ (i < ISDN_LMSNLEN - 1))
m->lmsn[i++] = *p[0]++;
m->lmsn[i] = '\0';
break;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index d7316b8..f19b874 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -167,6 +167,15 @@
}
EXPORT_SYMBOL_GPL(md_new_event);
+/* Alternate version that can be called from interrupts
+ * when calling sysfs_notify isn't needed.
+ */
+void md_new_event_inintr(mddev_t *mddev)
+{
+ atomic_inc(&md_event_count);
+ wake_up(&md_event_waiters);
+}
+
/*
* Enables to iterate over all existing md arrays
* all_mddevs_lock protects this list.
@@ -2252,7 +2261,7 @@
} else {
if (cmd_match(page, "check"))
set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
- else if (cmd_match(page, "repair"))
+ else if (!cmd_match(page, "repair"))
return -EINVAL;
set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -4149,7 +4158,7 @@
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
- md_new_event(mddev);
+ md_new_event_inintr(mddev);
}
/* seq_file implementation /proc/mdstat */
@@ -5028,8 +5037,10 @@
printk(KERN_INFO "md: stopping all md devices.\n");
ITERATE_MDDEV(mddev,tmp)
- if (mddev_trylock(mddev))
+ if (mddev_trylock(mddev)) {
do_md_stop (mddev, 1);
+ mddev_unlock(mddev);
+ }
/*
* certain more exotic SCSI devices are known to be
* volatile wrt too early system reboots. While the
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 678f4db..cb8c631 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -331,13 +331,14 @@
goto out_free_conf;
size = conf->strip_zone[cur].size;
- for (i=0; i< nb_zone; i++) {
- conf->hash_table[i] = conf->strip_zone + cur;
+ conf->hash_table[0] = conf->strip_zone + cur;
+ for (i=1; i< nb_zone; i++) {
while (size <= conf->hash_spacing) {
cur++;
size += conf->strip_zone[cur].size;
}
size -= conf->hash_spacing;
+ conf->hash_table[i] = conf->strip_zone + cur;
}
if (conf->preshift) {
conf->hash_spacing >>= conf->preshift;
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index fffc711..344d83a 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -8,22 +8,54 @@
tristate "Video For Linux"
---help---
Support for audio/video capture and overlay devices and FM radio
- cards. The exact capabilities of each device vary. User tools for
- this are available from
- <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+ cards. The exact capabilities of each device vary.
This kernel includes support for the new Video for Linux Two API,
(V4L2) as well as the original system. Drivers and applications
need to be rewritten to use V4L2, but drivers for popular cards
and applications for most video capture functions already exist.
- Documentation for the original API is included in the file
- <file:Documentation/video4linux/API.html>. Documentation for V4L2 is
- available on the web at <http://bytesex.org/v4l/>.
+ Additional info and docs are available on the web at
+ <http://linuxtv.org>
+
+ Documentation for V4L2 is also available on the web at
+ <http://bytesex.org/v4l/>.
To compile this driver as a module, choose M here: the
module will be called videodev.
+config VIDEO_V4L1
+ boolean "Enable Video For Linux API 1 (DEPRECATED)"
+ depends on VIDEO_DEV
+ select VIDEO_V4L1_COMPAT
+ default y
+ ---help---
+ Enables a compatibility API used by most V4L2 devices to allow
+ its usage with legacy applications that supports only V4L1 api.
+
+ If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L1_COMPAT
+ boolean "Enable Video For Linux API 1 compatible Layer"
+ depends on VIDEO_DEV
+ default y
+ ---help---
+ This api were developed to be used at Kernel 2.2 and 2.4, but
+ lacks support for several video standards. There are several
+ drivers at kernel that still depends on it.
+
+ Documentation for the original API is included in the file
+ <Documentation/video4linux/API.html>.
+
+ User tools for this are available from
+ <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+ If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L2
+ tristate
+ default y
+
source "drivers/media/video/Kconfig"
source "drivers/media/radio/Kconfig"
@@ -65,4 +97,3 @@
module will be called dabusb.
endmenu
-
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 6a901a0..1a04db4 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -1,9 +1,10 @@
config VIDEO_SAA7146
tristate
- select I2C
+ depends on I2C
config VIDEO_SAA7146_VV
tristate
+ select VIDEO_V4L2
select VIDEO_BUF
select VIDEO_VIDEOBUF
select VIDEO_SAA7146
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 3f0ec6b..a97c8f5 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -22,26 +22,26 @@
source "drivers/media/dvb/dvb-core/Kconfig"
comment "Supported SAA7146 based PCI Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/ttpci/Kconfig"
comment "Supported USB Adapters"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && I2C
source "drivers/media/dvb/dvb-usb/Kconfig"
source "drivers/media/dvb/ttusb-budget/Kconfig"
source "drivers/media/dvb/ttusb-dec/Kconfig"
source "drivers/media/dvb/cinergyT2/Kconfig"
comment "Supported FlexCopII (B2C2) Adapters"
- depends on DVB_CORE && (PCI || USB)
+ depends on DVB_CORE && (PCI || USB) && I2C
source "drivers/media/dvb/b2c2/Kconfig"
comment "Supported BT878 Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/bt8xx/Kconfig"
comment "Supported Pluto2 Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/pluto2/Kconfig"
comment "Supported DVB Frontends"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2963605..d7f1fd5 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,6 +1,6 @@
config DVB_B2C2_FLEXCOP
tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
- depends on DVB_CORE
+ depends on DVB_CORE && I2C
select DVB_STV0299
select DVB_MT352
select DVB_MT312
@@ -16,7 +16,7 @@
config DVB_B2C2_FLEXCOP_PCI
tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
- depends on DVB_B2C2_FLEXCOP && PCI
+ depends on DVB_B2C2_FLEXCOP && PCI && I2C
help
Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
@@ -24,7 +24,7 @@
config DVB_B2C2_FLEXCOP_USB
tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
- depends on DVB_B2C2_FLEXCOP && USB
+ depends on DVB_B2C2_FLEXCOP && USB && I2C
help
Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 376ca48f..f394002 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,12 +1,13 @@
config DVB_BT8XX
tristate "BT8xx based PCI cards"
- depends on DVB_CORE && PCI && VIDEO_BT848
+ depends on DVB_CORE && PCI && I2C && VIDEO_BT848
select DVB_MT352
select DVB_SP887X
select DVB_NXT6000
select DVB_CX24110
select DVB_OR51211
select DVB_LGDT330X
+ select DVB_ZL10353
select FW_LOADER
help
Support for PCI cards based on the Bt8xx PCI bridge. Examples are
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index baa8227..ccc7b2e 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -115,7 +115,7 @@
return 0;
}
-static struct bt878 __init *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
{
unsigned int card_nr;
@@ -709,7 +709,7 @@
}
}
-static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
{
int result;
@@ -794,7 +794,7 @@
return 0;
}
-static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
{
struct dvb_bt8xx_card *card;
struct pci_dev* bttv_pci_dev;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 71b575d..9325d03 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -902,7 +902,10 @@
return -ENOMEM;
}
- dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE);
+ if ((err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE)) < 0) {
+ kfree(cinergyt2);
+ return err;
+ }
cinergyt2->demux.priv = cinergyt2;
cinergyt2->demux.filternum = 256;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 4f8f257..a051790 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -106,6 +106,8 @@
unsigned long tune_mode_flags;
unsigned int delay;
unsigned int reinitialise;
+ int tone;
+ int voltage;
/* swzigzag values */
unsigned int state;
@@ -537,6 +539,12 @@
if (fepriv->reinitialise) {
dvb_frontend_init(fe);
+ if (fepriv->tone != -1) {
+ fe->ops->set_tone(fe, fepriv->tone);
+ }
+ if (fepriv->voltage != -1) {
+ fe->ops->set_voltage(fe, fepriv->voltage);
+ }
fepriv->reinitialise = 0;
}
@@ -788,6 +796,7 @@
case FE_SET_TONE:
if (fe->ops->set_tone) {
err = fe->ops->set_tone(fe, (fe_sec_tone_mode_t) parg);
+ fepriv->tone = (fe_sec_tone_mode_t) parg;
fepriv->state = FESTATE_DISEQC;
fepriv->status = 0;
}
@@ -796,6 +805,7 @@
case FE_SET_VOLTAGE:
if (fe->ops->set_voltage) {
err = fe->ops->set_voltage(fe, (fe_sec_voltage_t) parg);
+ fepriv->voltage = (fe_sec_voltage_t) parg;
fepriv->state = FESTATE_DISEQC;
fepriv->status = 0;
}
@@ -995,6 +1005,8 @@
/* normal tune mode when opened R/W */
fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
+ fepriv->tone = -1;
+ fepriv->voltage = -1;
}
return ret;
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 96fe0ec..3852430 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -219,8 +219,6 @@
return -ENOMEM;
}
- mutex_unlock(&dvbdev_register_lock);
-
memcpy(dvbdev, template, sizeof(struct dvb_device));
dvbdev->type = type;
dvbdev->id = id;
@@ -231,6 +229,8 @@
list_add_tail (&dvbdev->list_head, &adap->device_list);
+ mutex_unlock(&dvbdev_register_lock);
+
devfs_mk_cdev(MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
S_IFCHR | S_IRUSR | S_IWUSR,
"dvb/adapter%d/%s%d", adap->num, dnames[type], id);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index d3df120..e388fb1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && I2C
select FW_LOADER
help
By enabling this you will be able to choose the various supported
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 7edd636..1f0d3e9 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -150,6 +150,15 @@
return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
}
+static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 b = 0;
+ if (onoff)
+ return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
+ else
+ return 0;
+}
+
static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
{
u8 buf[2] = { 0x03, 0x00 };
@@ -544,7 +553,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_lgdt3303_frontend_attach,
.tuner_attach = cxusb_lgh064f_tuner_attach,
@@ -589,7 +598,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_dee1601_frontend_attach,
.tuner_attach = cxusb_dee1601_tuner_attach,
@@ -638,7 +647,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_mt352_frontend_attach,
.tuner_attach = cxusb_lgz201_tuner_attach,
@@ -683,7 +692,7 @@
.size_of_priv = sizeof(struct cxusb_state),
.streaming_ctrl = cxusb_streaming_ctrl,
- .power_ctrl = cxusb_power_ctrl,
+ .power_ctrl = cxusb_bluebird_power_ctrl,
.frontend_attach = cxusb_mt352_frontend_attach,
.tuner_attach = cxusb_dtt7579_tuner_attach,
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index d661c6f..691dc84 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -29,6 +29,9 @@
#include "dvb_frontend.h"
#include "cx24123.h"
+#define XTAL 10111000
+
+static int force_band;
static int debug;
#define dprintk(args...) \
do { \
@@ -52,6 +55,7 @@
u32 VGAarg;
u32 bandselectarg;
u32 pllarg;
+ u32 FILTune;
/* The Demod/Tuner can't easily provide these, we cache them */
u32 currentfreq;
@@ -63,43 +67,33 @@
{
u32 symbolrate_low;
u32 symbolrate_high;
- u32 VCAslope;
- u32 VCAoffset;
- u32 VGA1offset;
- u32 VGA2offset;
u32 VCAprogdata;
u32 VGAprogdata;
+ u32 FILTune;
} cx24123_AGC_vals[] =
{
{
.symbolrate_low = 1000000,
.symbolrate_high = 4999999,
- .VCAslope = 0x07,
- .VCAoffset = 0x0f,
- .VGA1offset = 0x1f8,
- .VGA2offset = 0x1f8,
- .VGAprogdata = (2 << 18) | (0x1f8 << 9) | 0x1f8,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x07,
+ /* the specs recommend other values for VGA offsets,
+ but tests show they are wrong */
+ .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0,
+ .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x07,
+ .FILTune = 0x27f /* 0.41 V */
},
{
.symbolrate_low = 5000000,
.symbolrate_high = 14999999,
- .VCAslope = 0x1f,
- .VCAoffset = 0x1f,
- .VGA1offset = 0x1e0,
- .VGA2offset = 0x180,
- .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x1f,
+ .VGAprogdata = (1 << 19) | (0x180 << 9) | 0x1e0,
+ .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x1f,
+ .FILTune = 0x317 /* 0.90 V */
},
{
.symbolrate_low = 15000000,
.symbolrate_high = 45000000,
- .VCAslope = 0x3f,
- .VCAoffset = 0x3f,
- .VGA1offset = 0x180,
- .VGA2offset = 0x100,
- .VGAprogdata = (2 << 18) | (0x100 << 9) | 0x180,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x3f,
+ .VGAprogdata = (1 << 19) | (0x100 << 9) | 0x180,
+ .VCAprogdata = (2 << 19) | (0x07 << 9) | 0x3f,
+ .FILTune = 0x145 /* 2.70 V */
},
};
@@ -112,91 +106,80 @@
{
u32 freq_low;
u32 freq_high;
- u32 bandselect;
u32 VCOdivider;
- u32 VCOnumber;
u32 progdata;
} cx24123_bandselect_vals[] =
{
+ /* band 1 */
{
.freq_low = 950000,
- .freq_high = 1018999,
- .bandselect = 0x40,
- .VCOdivider = 4,
- .VCOnumber = 7,
- .progdata = (0 << 18) | (0 << 9) | 0x40,
- },
- {
- .freq_low = 1019000,
.freq_high = 1074999,
- .bandselect = 0x80,
.VCOdivider = 4,
- .VCOnumber = 8,
- .progdata = (0 << 18) | (0 << 9) | 0x80,
+ .progdata = (0 << 19) | (0 << 9) | 0x40,
},
+
+ /* band 2 */
{
.freq_low = 1075000,
- .freq_high = 1227999,
- .bandselect = 0x01,
- .VCOdivider = 2,
- .VCOnumber = 1,
- .progdata = (0 << 18) | (1 << 9) | 0x01,
+ .freq_high = 1177999,
+ .VCOdivider = 4,
+ .progdata = (0 << 19) | (0 << 9) | 0x80,
},
+
+ /* band 3 */
{
- .freq_low = 1228000,
- .freq_high = 1349999,
- .bandselect = 0x02,
+ .freq_low = 1178000,
+ .freq_high = 1295999,
.VCOdivider = 2,
- .VCOnumber = 2,
- .progdata = (0 << 18) | (1 << 9) | 0x02,
+ .progdata = (0 << 19) | (1 << 9) | 0x01,
},
+
+ /* band 4 */
{
- .freq_low = 1350000,
- .freq_high = 1481999,
- .bandselect = 0x04,
+ .freq_low = 1296000,
+ .freq_high = 1431999,
.VCOdivider = 2,
- .VCOnumber = 3,
- .progdata = (0 << 18) | (1 << 9) | 0x04,
+ .progdata = (0 << 19) | (1 << 9) | 0x02,
},
+
+ /* band 5 */
{
- .freq_low = 1482000,
- .freq_high = 1595999,
- .bandselect = 0x08,
+ .freq_low = 1432000,
+ .freq_high = 1575999,
.VCOdivider = 2,
- .VCOnumber = 4,
- .progdata = (0 << 18) | (1 << 9) | 0x08,
+ .progdata = (0 << 19) | (1 << 9) | 0x04,
},
+
+ /* band 6 */
{
- .freq_low = 1596000,
+ .freq_low = 1576000,
.freq_high = 1717999,
- .bandselect = 0x10,
.VCOdivider = 2,
- .VCOnumber = 5,
- .progdata = (0 << 18) | (1 << 9) | 0x10,
+ .progdata = (0 << 19) | (1 << 9) | 0x08,
},
+
+ /* band 7 */
{
.freq_low = 1718000,
.freq_high = 1855999,
- .bandselect = 0x20,
.VCOdivider = 2,
- .VCOnumber = 6,
- .progdata = (0 << 18) | (1 << 9) | 0x20,
+ .progdata = (0 << 19) | (1 << 9) | 0x10,
},
+
+ /* band 8 */
{
.freq_low = 1856000,
.freq_high = 2035999,
- .bandselect = 0x40,
.VCOdivider = 2,
- .VCOnumber = 7,
- .progdata = (0 << 18) | (1 << 9) | 0x40,
+ .progdata = (0 << 19) | (1 << 9) | 0x20,
},
+
+ /* band 9 */
{
.freq_low = 2036000,
- .freq_high = 2149999,
- .bandselect = 0x80,
+ .freq_high = 2150000,
.VCOdivider = 2,
- .VCOnumber = 8,
- .progdata = (0 << 18) | (1 << 9) | 0x80,
+ .progdata = (0 << 19) | (1 << 9) | 0x40,
},
};
@@ -207,49 +190,44 @@
{
{0x00, 0x03}, /* Reset system */
{0x00, 0x00}, /* Clear reset */
- {0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
- {0x03, 0x07},
- {0x04, 0x10},
- {0x05, 0x04},
- {0x06, 0x31},
- {0x0d, 0x02},
- {0x0e, 0x03},
- {0x0f, 0xfe},
- {0x10, 0x01},
- {0x14, 0x01},
- {0x15, 0x98},
- {0x16, 0x00},
- {0x17, 0x01},
- {0x1b, 0x05},
- {0x1c, 0x80},
- {0x1d, 0x00},
- {0x1e, 0x00},
- {0x20, 0x41},
- {0x21, 0x15},
- {0x27, 0x14},
- {0x28, 0x46},
- {0x29, 0x00},
- {0x2a, 0xb0},
- {0x2b, 0x73},
- {0x2c, 0x00},
+ {0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */
+ {0x04, 0x10}, /* MPEG */
+ {0x05, 0x04}, /* MPEG */
+ {0x06, 0x31}, /* MPEG (default) */
+ {0x0b, 0x00}, /* Freq search start point (default) */
+ {0x0c, 0x00}, /* Demodulator sample gain (default) */
+ {0x0d, 0x02}, /* Frequency search range = Fsymbol / 4 (default) */
+ {0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */
+ {0x0f, 0xfe}, /* FEC search mask (all supported codes) */
+ {0x10, 0x01}, /* Default search inversion, no repeat (default) */
+ {0x16, 0x00}, /* Enable reading of frequency */
+ {0x17, 0x01}, /* Enable EsNO Ready Counter */
+ {0x1c, 0x80}, /* Enable error counter */
+ {0x20, 0x00}, /* Tuner burst clock rate = 500KHz */
+ {0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */
+ {0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */
+ {0x29, 0x00}, /* DiSEqC LNB_DC off */
+ {0x2a, 0xb0}, /* DiSEqC Parameters (default) */
+ {0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */
+ {0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */
{0x2d, 0x00},
{0x2e, 0x00},
{0x2f, 0x00},
{0x30, 0x00},
{0x31, 0x00},
- {0x32, 0x8c},
- {0x33, 0x00},
+ {0x32, 0x8c}, /* DiSEqC Parameters (default) */
+ {0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */
{0x34, 0x00},
- {0x35, 0x03},
- {0x36, 0x02},
- {0x37, 0x3a},
- {0x3a, 0x00}, /* Enable AGC accumulator */
- {0x44, 0x00},
- {0x45, 0x00},
- {0x46, 0x05},
- {0x56, 0x41},
- {0x57, 0xff},
- {0x67, 0x83},
+ {0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */
+ {0x36, 0x02}, /* DiSEqC Parameters (default) */
+ {0x37, 0x3a}, /* DiSEqC Parameters (default) */
+ {0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */
+ {0x44, 0x00}, /* Constellation (default) */
+ {0x45, 0x00}, /* Symbol count (default) */
+ {0x46, 0x0d}, /* Symbol rate estimator on (default) */
+ {0x56, 0x41}, /* Various (default) */
+ {0x57, 0xff}, /* Error Counter Window (default) */
+ {0x67, 0x83}, /* Non-DCII symbol clock */
};
static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
@@ -258,6 +236,10 @@
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
int err;
+ if (debug>1)
+ printk("cx24123: %s: write reg 0x%02x, value 0x%02x\n",
+ __FUNCTION__,reg, data);
+
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk("%s: writereg error(err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -274,6 +256,10 @@
struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
int err;
+ if (debug>1)
+ printk("cx24123: %s: writeln addr=0x08, reg 0x%02x, value 0x%02x\n",
+ __FUNCTION__,reg, data);
+
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
" data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -303,6 +289,9 @@
return ret;
}
+ if (debug>1)
+ printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret);
+
return b1[0];
}
@@ -313,17 +302,23 @@
static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
{
+ u8 nom_reg = cx24123_readreg(state, 0x0e);
+ u8 auto_reg = cx24123_readreg(state, 0x10);
+
switch (inversion) {
case INVERSION_OFF:
- cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
- cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+ dprintk("%s: inversion off\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg & ~0x80);
+ cx24123_writereg(state, 0x10, auto_reg | 0x80);
break;
case INVERSION_ON:
- cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
- cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+ dprintk("%s: inversion on\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x80);
+ cx24123_writereg(state, 0x10, auto_reg | 0x80);
break;
case INVERSION_AUTO:
- cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
+ dprintk("%s: inversion auto\n",__FUNCTION__);
+ cx24123_writereg(state, 0x10, auto_reg & ~0x80);
break;
default:
return -EINVAL;
@@ -338,92 +333,191 @@
val = cx24123_readreg(state, 0x1b) >> 7;
- if (val == 0)
+ if (val == 0) {
+ dprintk("%s: read inversion off\n",__FUNCTION__);
*inversion = INVERSION_OFF;
- else
+ } else {
+ dprintk("%s: read inversion on\n",__FUNCTION__);
*inversion = INVERSION_ON;
+ }
return 0;
}
static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
{
+ u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
+
if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
fec = FEC_AUTO;
- /* Hardware has 5/11 and 3/5 but are never unused */
switch (fec) {
- case FEC_NONE:
- return cx24123_writereg(state, 0x0f, 0x01);
case FEC_1_2:
- return cx24123_writereg(state, 0x0f, 0x02);
+ dprintk("%s: set FEC to 1/2\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x01);
+ cx24123_writereg(state, 0x0f, 0x02);
+ break;
case FEC_2_3:
- return cx24123_writereg(state, 0x0f, 0x04);
+ dprintk("%s: set FEC to 2/3\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x02);
+ cx24123_writereg(state, 0x0f, 0x04);
+ break;
case FEC_3_4:
- return cx24123_writereg(state, 0x0f, 0x08);
+ dprintk("%s: set FEC to 3/4\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x03);
+ cx24123_writereg(state, 0x0f, 0x08);
+ break;
+ case FEC_4_5:
+ dprintk("%s: set FEC to 4/5\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x04);
+ cx24123_writereg(state, 0x0f, 0x10);
+ break;
case FEC_5_6:
- return cx24123_writereg(state, 0x0f, 0x20);
+ dprintk("%s: set FEC to 5/6\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x05);
+ cx24123_writereg(state, 0x0f, 0x20);
+ break;
+ case FEC_6_7:
+ dprintk("%s: set FEC to 6/7\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x06);
+ cx24123_writereg(state, 0x0f, 0x40);
+ break;
case FEC_7_8:
- return cx24123_writereg(state, 0x0f, 0x80);
+ dprintk("%s: set FEC to 7/8\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0e, nom_reg | 0x07);
+ cx24123_writereg(state, 0x0f, 0x80);
+ break;
case FEC_AUTO:
- return cx24123_writereg(state, 0x0f, 0xae);
+ dprintk("%s: set FEC to auto\n",__FUNCTION__);
+ cx24123_writereg(state, 0x0f, 0xfe);
+ break;
default:
return -EOPNOTSUPP;
}
-}
-
-static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
-{
- int ret;
- u8 val;
-
- ret = cx24123_readreg (state, 0x1b);
- if (ret < 0)
- return ret;
- val = ret & 0x07;
- switch (val) {
- case 1:
- *fec = FEC_1_2;
- break;
- case 3:
- *fec = FEC_2_3;
- break;
- case 4:
- *fec = FEC_3_4;
- break;
- case 5:
- *fec = FEC_4_5;
- break;
- case 6:
- *fec = FEC_5_6;
- break;
- case 7:
- *fec = FEC_7_8;
- break;
- case 2: /* *fec = FEC_3_5; break; */
- case 0: /* *fec = FEC_5_11; break; */
- *fec = FEC_AUTO;
- break;
- default:
- *fec = FEC_NONE; // can't happen
- }
return 0;
}
-/* fixme: Symbol rates < 3MSps may not work because of precision loss */
+static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
+{
+ int ret;
+
+ ret = cx24123_readreg (state, 0x1b);
+ if (ret < 0)
+ return ret;
+ ret = ret & 0x07;
+
+ switch (ret) {
+ case 1:
+ *fec = FEC_1_2;
+ break;
+ case 2:
+ *fec = FEC_2_3;
+ break;
+ case 3:
+ *fec = FEC_3_4;
+ break;
+ case 4:
+ *fec = FEC_4_5;
+ break;
+ case 5:
+ *fec = FEC_5_6;
+ break;
+ case 6:
+ *fec = FEC_6_7;
+ break;
+ case 7:
+ *fec = FEC_7_8;
+ break;
+ default:
+ /* this can happen when there's no lock */
+ *fec = FEC_NONE;
+ }
+
+ return 0;
+}
+
+/* Approximation of closest integer of log2(a/b). It actually gives the
+ lowest integer i such that 2^i >= round(a/b) */
+static u32 cx24123_int_log2(u32 a, u32 b)
+{
+ u32 exp, nearest = 0;
+ u32 div = a / b;
+ if(a % b >= b / 2) ++div;
+ if(div < (1 << 31))
+ {
+ for(exp = 1; div > exp; nearest++)
+ exp += exp;
+ }
+ return nearest;
+}
+
static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
{
- u32 val;
+ u32 tmp, sample_rate, ratio, sample_gain;
+ u8 pll_mult;
- val = (srate / 1185) * 100;
+ /* check if symbol rate is within limits */
+ if ((srate > state->ops.info.symbol_rate_max) ||
+ (srate < state->ops.info.symbol_rate_min))
+ return -EOPNOTSUPP;;
- /* Compensate for scaling up, by removing 17 symbols per 1Msps */
- val = val - (17 * (srate / 1000000));
+ /* choose the sampling rate high enough for the required operation,
+ while optimizing the power consumed by the demodulator */
+ if (srate < (XTAL*2)/2)
+ pll_mult = 2;
+ else if (srate < (XTAL*3)/2)
+ pll_mult = 3;
+ else if (srate < (XTAL*4)/2)
+ pll_mult = 4;
+ else if (srate < (XTAL*5)/2)
+ pll_mult = 5;
+ else if (srate < (XTAL*6)/2)
+ pll_mult = 6;
+ else if (srate < (XTAL*7)/2)
+ pll_mult = 7;
+ else if (srate < (XTAL*8)/2)
+ pll_mult = 8;
+ else
+ pll_mult = 9;
- cx24123_writereg(state, 0x08, (val >> 16) & 0xff );
- cx24123_writereg(state, 0x09, (val >> 8) & 0xff );
- cx24123_writereg(state, 0x0a, (val ) & 0xff );
+
+ sample_rate = pll_mult * XTAL;
+
+ /*
+ SYSSymbolRate[21:0] = (srate << 23) / sample_rate
+
+ We have to use 32 bit unsigned arithmetic without precision loss.
+ The maximum srate is 45000000 or 0x02AEA540. This number has
+ only 6 clear bits on top, hence we can shift it left only 6 bits
+ at a time. Borrowed from cx24110.c
+ */
+
+ tmp = srate << 6;
+ ratio = tmp / sample_rate;
+
+ tmp = (tmp % sample_rate) << 6;
+ ratio = (ratio << 6) + (tmp / sample_rate);
+
+ tmp = (tmp % sample_rate) << 6;
+ ratio = (ratio << 6) + (tmp / sample_rate);
+
+ tmp = (tmp % sample_rate) << 5;
+ ratio = (ratio << 5) + (tmp / sample_rate);
+
+
+ cx24123_writereg(state, 0x01, pll_mult * 6);
+
+ cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f );
+ cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff );
+ cx24123_writereg(state, 0x0a, (ratio ) & 0xff );
+
+ /* also set the demodulator sample gain */
+ sample_gain = cx24123_int_log2(sample_rate, srate);
+ tmp = cx24123_readreg(state, 0x0c) & ~0xe0;
+ cx24123_writereg(state, 0x0c, tmp | sample_gain << 5);
+
+ dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", __FUNCTION__, srate, ratio, sample_rate, sample_gain);
return 0;
}
@@ -437,6 +531,9 @@
struct cx24123_state *state = fe->demodulator_priv;
u32 ndiv = 0, adiv = 0, vco_div = 0;
int i = 0;
+ int pump = 2;
+ int band = 0;
+ int num_bands = sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]);
/* Defaults for low freq, low rate */
state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -444,38 +541,49 @@
state->bandselectarg = cx24123_bandselect_vals[0].progdata;
vco_div = cx24123_bandselect_vals[0].VCOdivider;
- /* For the given symbolerate, determine the VCA and VGA programming bits */
+ /* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
{
if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
- (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+ (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+ state->FILTune = cx24123_AGC_vals[i].FILTune;
}
}
- /* For the given frequency, determine the bandselect programming bits */
- for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+ /* determine the band to use */
+ if(force_band < 1 || force_band > num_bands)
{
- if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
- (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
- state->bandselectarg = cx24123_bandselect_vals[i].progdata;
- vco_div = cx24123_bandselect_vals[i].VCOdivider;
+ for (i = 0; i < num_bands; i++)
+ {
+ if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
+ (cx24123_bandselect_vals[i].freq_high >= p->frequency) )
+ band = i;
}
}
+ else
+ band = force_band - 1;
+
+ state->bandselectarg = cx24123_bandselect_vals[band].progdata;
+ vco_div = cx24123_bandselect_vals[band].VCOdivider;
+
+ /* determine the charge pump current */
+ if ( p->frequency < (cx24123_bandselect_vals[band].freq_low + cx24123_bandselect_vals[band].freq_high)/2 )
+ pump = 0x01;
+ else
+ pump = 0x02;
/* Determine the N/A dividers for the requested lband freq (in kHz). */
- /* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
- ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
- adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+ /* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */
+ ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff;
+ adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f;
if (adiv == 0)
- adiv++;
+ ndiv++;
- /* determine the correct pll frequency values. */
- /* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
- state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
- state->pllarg |= (ndiv << 5) | adiv;
+ /* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */
+ state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv;
return 0;
}
@@ -489,6 +597,8 @@
struct cx24123_state *state = fe->demodulator_priv;
unsigned long timeout;
+ dprintk("%s: pll writereg called, data=0x%08x\n",__FUNCTION__,data);
+
/* align the 21 bytes into to bit23 boundary */
data = data << 3;
@@ -538,6 +648,9 @@
static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
struct cx24123_state *state = fe->demodulator_priv;
+ u8 val;
+
+ dprintk("frequency=%i\n", p->frequency);
if (cx24123_pll_calculate(fe, p) != 0) {
printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
@@ -552,6 +665,14 @@
cx24123_pll_writereg(fe, p, state->bandselectarg);
cx24123_pll_writereg(fe, p, state->pllarg);
+ /* set the FILTUNE voltage */
+ val = cx24123_readreg(state, 0x28) & ~0x3;
+ cx24123_writereg(state, 0x27, state->FILTune >> 2);
+ cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
+
+ dprintk("%s: pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg,
+ state->bandselectarg,state->pllarg);
+
return 0;
}
@@ -560,6 +681,8 @@
struct cx24123_state *state = fe->demodulator_priv;
int i;
+ dprintk("%s: init frontend\n",__FUNCTION__);
+
/* Configure the demod to a good set of defaults */
for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
@@ -587,10 +710,13 @@
switch (voltage) {
case SEC_VOLTAGE_13:
+ dprintk("%s: isl6421 voltage = 13V\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
case SEC_VOLTAGE_18:
+ dprintk("%s: isl6421 voltage = 18V\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
case SEC_VOLTAGE_OFF:
+ dprintk("%s: isl5421 voltage off\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x30);
default:
return -EINVAL;
@@ -624,13 +750,93 @@
return 0;
}
-static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
- struct dvb_diseqc_master_cmd *cmd)
+/* wait for diseqc queue to become ready (or timeout) */
+static void cx24123_wait_for_diseqc(struct cx24123_state *state)
{
- /* fixme: Implement diseqc */
- printk("%s: No support yet\n",__FUNCTION__);
+ unsigned long timeout = jiffies + msecs_to_jiffies(200);
+ while (!(cx24123_readreg(state, 0x29) & 0x40)) {
+ if(time_after(jiffies, timeout)) {
+ printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__);
+ break;
+ }
+ msleep(10);
+ }
+}
- return -ENOTSUPP;
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ int i, val;
+
+ dprintk("%s:\n",__FUNCTION__);
+
+ /* check if continuous tone has been stopped */
+ if (state->config->use_isl6421)
+ val = cx24123_readlnbreg(state, 0x00) & 0x10;
+ else
+ val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+ if (val) {
+ printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+ return -ENOTSUPP;
+ }
+
+ /* wait for diseqc queue ready */
+ cx24123_wait_for_diseqc(state);
+
+ /* select tone mode */
+ cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xf8);
+
+ for (i = 0; i < cmd->msg_len; i++)
+ cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
+
+ val = cx24123_readreg(state, 0x29);
+ cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
+
+ /* wait for diseqc message to finish sending */
+ cx24123_wait_for_diseqc(state);
+
+ return 0;
+}
+
+static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+ struct cx24123_state *state = fe->demodulator_priv;
+ int val;
+
+ dprintk("%s:\n", __FUNCTION__);
+
+ /* check if continuous tone has been stoped */
+ if (state->config->use_isl6421)
+ val = cx24123_readlnbreg(state, 0x00) & 0x10;
+ else
+ val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+ if (val) {
+ printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+ return -ENOTSUPP;
+ }
+
+ cx24123_wait_for_diseqc(state);
+
+ /* select tone mode */
+ val = cx24123_readreg(state, 0x2a) & 0xf8;
+ cx24123_writereg(state, 0x2a, val | 0x04);
+
+ val = cx24123_readreg(state, 0x29);
+
+ if (burst == SEC_MINI_A)
+ cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
+ else if (burst == SEC_MINI_B)
+ cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
+ else
+ return -EINVAL;
+
+ cx24123_wait_for_diseqc(state);
+
+ return 0;
}
static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
@@ -642,13 +848,15 @@
*status = 0;
if (lock & 0x01)
- *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+ *status |= FE_HAS_SIGNAL;
+ if (sync & 0x02)
+ *status |= FE_HAS_CARRIER;
if (sync & 0x04)
*status |= FE_HAS_VITERBI;
if (sync & 0x08)
- *status |= FE_HAS_CARRIER;
+ *status |= FE_HAS_SYNC;
if (sync & 0x80)
- *status |= FE_HAS_SYNC | FE_HAS_LOCK;
+ *status |= FE_HAS_LOCK;
return 0;
}
@@ -681,6 +889,8 @@
else
state->snr = 0;
+ dprintk("%s: BER = %d, S/N index = %d\n",__FUNCTION__,state->lastber, state->snr);
+
*ber = state->lastber;
return 0;
@@ -691,6 +901,8 @@
struct cx24123_state *state = fe->demodulator_priv;
*signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
+ dprintk("%s: Signal strength = %d\n",__FUNCTION__,*signal_strength);
+
return 0;
}
@@ -699,6 +911,8 @@
struct cx24123_state *state = fe->demodulator_priv;
*snr = state->snr;
+ dprintk("%s: read S/N index = %d\n",__FUNCTION__,*snr);
+
return 0;
}
@@ -707,6 +921,8 @@
struct cx24123_state *state = fe->demodulator_priv;
*ucblocks = state->lastber;
+ dprintk("%s: ucblocks (ber) = %d\n",__FUNCTION__,*ucblocks);
+
return 0;
}
@@ -714,6 +930,8 @@
{
struct cx24123_state *state = fe->demodulator_priv;
+ dprintk("%s: set_frontend\n",__FUNCTION__);
+
if (state->config->set_ts_params)
state->config->set_ts_params(fe, 0);
@@ -737,6 +955,8 @@
{
struct cx24123_state *state = fe->demodulator_priv;
+ dprintk("%s: get_frontend\n",__FUNCTION__);
+
if (cx24123_get_inversion(state, &p->inversion) != 0) {
printk("%s: Failed to get inversion status\n",__FUNCTION__);
return -EREMOTEIO;
@@ -763,8 +983,10 @@
switch (tone) {
case SEC_TONE_ON:
+ dprintk("%s: isl6421 sec tone on\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val | 0x10);
case SEC_TONE_OFF:
+ dprintk("%s: isl6421 sec tone off\n",__FUNCTION__);
return cx24123_writelnbreg(state, 0x0, val & 0x2f);
default:
printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
@@ -855,12 +1077,13 @@
.frequency_min = 950000,
.frequency_max = 2150000,
.frequency_stepsize = 1011, /* kHz for QPSK frontends */
- .frequency_tolerance = 29500,
+ .frequency_tolerance = 5000,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
- FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
FE_CAN_QPSK | FE_CAN_RECOVER
},
@@ -875,12 +1098,16 @@
.read_snr = cx24123_read_snr,
.read_ucblocks = cx24123_read_ucblocks,
.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+ .diseqc_send_burst = cx24123_diseqc_send_burst,
.set_tone = cx24123_set_tone,
.set_voltage = cx24123_set_voltage,
};
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+module_param(force_band, int, 0644);
+MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off).");
MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
MODULE_AUTHOR("Steven Toth");
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index b6e2c38..791706e 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -235,8 +235,8 @@
.max = 863000000,
.count = 3,
.entries = {
- { 160000000, 44000000, 62500, 0xce, 0x01 },
- { 455000000, 44000000, 62500, 0xce, 0x02 },
+ { 165000000, 44000000, 62500, 0xce, 0x01 },
+ { 450000000, 44000000, 62500, 0xce, 0x02 },
{ 999999999, 44000000, 62500, 0xce, 0x04 },
},
};
diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig
index 84f8f9f..7d8e6e8 100644
--- a/drivers/media/dvb/pluto2/Kconfig
+++ b/drivers/media/dvb/pluto2/Kconfig
@@ -1,7 +1,6 @@
config DVB_PLUTO2
tristate "Pluto2 cards"
- depends on DVB_CORE && PCI
- select I2C
+ depends on DVB_CORE && PCI && I2C
select I2C_ALGOBIT
select DVB_TDA1004X
help
diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile
index 86ca84b..ce6a9aa 100644
--- a/drivers/media/dvb/pluto2/Makefile
+++ b/drivers/media/dvb/pluto2/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_DVB_PLUTO2) = pluto2.o
+obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 5b2aadb..b5ac7df 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,8 +1,7 @@
config DVB_AV7110
tristate "AV7110 cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select FW_LOADER
- select VIDEO_DEV
select VIDEO_SAA7146_VV
select DVB_VES1820
select DVB_VES1X93
@@ -59,7 +58,7 @@
config DVB_BUDGET
tristate "Budget cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0299
select DVB_VES1X93
@@ -80,7 +79,7 @@
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0297
select DVB_STV0299
@@ -100,8 +99,7 @@
config DVB_BUDGET_AV
tristate "Budget cards with analog video inputs"
- depends on DVB_CORE && PCI
- select VIDEO_DEV
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146_VV
select DVB_STV0299
select DVB_TDA1004X
@@ -119,7 +117,7 @@
config DVB_BUDGET_PATCH
tristate "AV7110 cards with Budget Patch"
- depends on DVB_CORE && DVB_BUDGET
+ depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
select DVB_AV7110
select DVB_STV0299
select DVB_VES1X93
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 8efe3ce..8a7cd7d 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1190,8 +1190,6 @@
SAA7146_HPS_SYNC_PORT_A);
saa7113_setinput(budget_av, 0);
- } else {
- ciintf_init(budget_av);
}
/* fixme: find some sane values here... */
@@ -1211,6 +1209,10 @@
budget_av->budget.dvb_adapter.priv = budget_av;
frontend_init(budget_av);
+ if (!budget_av->has_saa7113) {
+ ciintf_init(budget_av);
+ }
+
return 0;
}
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 5f91036..e64a609 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -71,6 +71,7 @@
struct tasklet_struct msp430_irq_tasklet;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
+ int ci_irq;
struct dvb_ca_en50221 ca;
char ir_dev_name[50];
u8 tuner_pll_address; /* used for philips_tdm1316l configs */
@@ -276,8 +277,10 @@
if (slot != 0)
return -EINVAL;
- // trigger on RISING edge during reset so we know when READY is re-asserted
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ if (budget_ci->ci_irq) {
+ // trigger on RISING edge during reset so we know when READY is re-asserted
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
budget_ci->slot_status = SLOTSTATUS_RESET;
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
msleep(1);
@@ -370,11 +373,50 @@
}
}
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+ unsigned int flags;
+
+ // ensure we don't get spurious IRQs during initialisation
+ if (!budget_ci->budget.ci_present)
+ return -EINVAL;
+
+ // read the CAM status
+ flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+ if (flags & CICONTROL_CAMDETECT) {
+ // mark it as present if it wasn't before
+ if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+ budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ }
+
+ // during a RESET, we check if we can read from IO memory to see when CAM is ready
+ if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+ if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+ budget_ci->slot_status = SLOTSTATUS_READY;
+ }
+ }
+ } else {
+ budget_ci->slot_status = SLOTSTATUS_NONE;
+ }
+
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ if (budget_ci->slot_status & SLOTSTATUS_READY) {
+ return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+ }
+ return DVB_CA_EN50221_POLL_CAM_PRESENT;
+ }
+
+ return 0;
+}
+
static int ciintf_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
int flags;
int result;
+ int ci_version;
+ int ca_flags;
memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
@@ -382,16 +424,29 @@
saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
// test if it is there
- if ((ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0) & 0xa0) != 0xa0) {
+ ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+ if ((ci_version & 0xa0) != 0xa0) {
result = -ENODEV;
goto error;
}
+
// determine whether a CAM is present or not
flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
budget_ci->slot_status = SLOTSTATUS_NONE;
if (flags & CICONTROL_CAMDETECT)
budget_ci->slot_status = SLOTSTATUS_PRESENT;
+ // version 0xa2 of the CI firmware doesn't generate interrupts
+ if (ci_version == 0xa2) {
+ ca_flags = 0;
+ budget_ci->ci_irq = 0;
+ } else {
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+ DVB_CA_EN50221_FLAG_IRQ_FR |
+ DVB_CA_EN50221_FLAG_IRQ_DA;
+ budget_ci->ci_irq = 1;
+ }
+
// register CI interface
budget_ci->ca.owner = THIS_MODULE;
budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
@@ -401,23 +456,27 @@
budget_ci->ca.slot_reset = ciintf_slot_reset;
budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+ budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
budget_ci->ca.data = budget_ci;
if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
&budget_ci->ca,
- DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
- DVB_CA_EN50221_FLAG_IRQ_FR |
- DVB_CA_EN50221_FLAG_IRQ_DA, 1)) != 0) {
+ ca_flags, 1)) != 0) {
printk("budget_ci: CI interface detected, but initialisation failed.\n");
goto error;
}
+
// Setup CI slot IRQ
- tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
- if (budget_ci->slot_status != SLOTSTATUS_NONE) {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
- } else {
- saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ if (budget_ci->ci_irq) {
+ tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
+ if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+ } else {
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+ }
+ saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
}
- saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+
+ // enable interface
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
CICONTROL_RESET, 1, 0);
@@ -426,10 +485,12 @@
budget_ci->budget.ci_present = 1;
// forge a fake CI IRQ so the CAM state is setup correctly
- flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
- if (budget_ci->slot_status != SLOTSTATUS_NONE)
- flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
- dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+ if (budget_ci->ci_irq) {
+ flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+ if (budget_ci->slot_status != SLOTSTATUS_NONE)
+ flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+ dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+ }
return 0;
@@ -443,9 +504,13 @@
struct saa7146_dev *saa = budget_ci->budget.dev;
// disable CI interrupts
- saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
- saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
- tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+ if (budget_ci->ci_irq) {
+ saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+ saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+ tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+ }
+
+ // reset interface
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
msleep(1);
ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
@@ -473,7 +538,7 @@
if (*isr & MASK_10)
ttpci_budget_irq10_handler(dev, isr);
- if ((*isr & MASK_03) && (budget_ci->budget.ci_present))
+ if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
}
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 248fdc7..6ceae38 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -1507,7 +1507,11 @@
mutex_unlock(&ttusb->semi2c);
- dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
+ if ((result = dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE)) < 0) {
+ ttusb_free_iso_urbs(ttusb);
+ kfree(ttusb);
+ return result;
+ }
ttusb->adapter.priv = ttusb;
/* i2c */
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d318be3..3fff757 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -25,7 +25,7 @@
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -59,7 +59,7 @@
config RADIO_RTRACK2
tristate "AIMSlab RadioTrack II support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -82,7 +82,7 @@
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
@@ -106,7 +106,7 @@
config RADIO_GEMTEK
tristate "GemTek Radio Card support"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below.
@@ -131,7 +131,7 @@
config RADIO_GEMTEK_PCI
tristate "GemTek PCI Radio Card support"
- depends on VIDEO_DEV && PCI
+ depends on VIDEO_V4L1 && PCI
---help---
Choose Y here if you have this PCI FM radio card.
@@ -145,7 +145,7 @@
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on VIDEO_DEV && PCI
+ depends on VIDEO_V4L1 && PCI
---help---
Choose Y here if you have this radio card. This card may also be
found as Gemtek PCI FM.
@@ -160,7 +160,7 @@
config RADIO_MAESTRO
tristate "Maestro on board radio"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
Say Y here to directly support the on-board radio tuner on the
Maestro 2 or 2E sound card.
@@ -175,7 +175,7 @@
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+ depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
---help---
Choose Y here if you have this FM radio card. You also need to say Y
to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +208,7 @@
config RADIO_SF16FMI
tristate "SF16FMI Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards. If you
compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +225,7 @@
config RADIO_SF16FMR2
tristate "SF16FMR2 Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards.
@@ -239,7 +239,7 @@
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have this FM radio card, and then fill in the
port address below. (TODO)
@@ -268,7 +268,7 @@
config RADIO_TRUST
tristate "Trust FM radio card"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
help
This is a driver for the Trust FM radio cards. Say Y if you have
such a card and want to use it under Linux.
@@ -286,7 +286,7 @@
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address and the frequency used for muting below.
@@ -330,7 +330,7 @@
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
- depends on ISA && VIDEO_DEV
+ depends on ISA && VIDEO_V4L1
---help---
Choose Y here if you have one of these FM radio cards, and then fill
in the port address below.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 85888a8..6b41970 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -2,10 +2,10 @@
# Multimedia Video device configuration
#
-menu "Video For Linux"
+menu "Video Capture Adapters"
depends on VIDEO_DEV
-comment "Video Adapters"
+comment "Video Capture Adapters"
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
@@ -16,11 +16,23 @@
V4L devices.
In doubt, say N.
+config VIDEO_VIVI
+ tristate "Virtual Video Driver"
+ depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+ select VIDEO_BUF
+ default n
+ ---help---
+ Enables a virtual video driver. This device shows a color bar
+ and a timestamp, as a real device would generate by using V4L2
+ api.
+ Say Y here if you want to test video apps or debug V4L devices.
+ In doubt, say N.
+
source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on VIDEO_DEV && I2C && VIDEO_BT848
+ depends on I2C && VIDEO_BT848
help
Support for Radio Data System (RDS) decoder. This allows seeing
@@ -32,7 +44,7 @@
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on VIDEO_DEV && ISA
+ depends on ISA && VIDEO_V4L1
help
Say Y if you have such a thing.
@@ -41,7 +53,7 @@
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_DEV && BROKEN
+ depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
@@ -52,7 +64,7 @@
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
- depends on VIDEO_DEV && PARPORT
+ depends on PARPORT && VIDEO_V4L1
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
@@ -62,7 +74,7 @@
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+ depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
@@ -73,7 +85,7 @@
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
@@ -86,7 +98,7 @@
config VIDEO_CPIA
tristate "CPiA Video For Linux"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L1
---help---
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
@@ -123,7 +135,7 @@
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
help
Support for I2C bus based teletext using the SAA5246A or SAA5281
chip. Useful only if you live in Europe.
@@ -150,7 +162,7 @@
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
- depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+ depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
select I2C_ALGO_SGI
help
Say Y here to build in support for the Vino video input system found
@@ -158,7 +170,7 @@
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIDEO_DEV && PCI
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
@@ -166,7 +178,7 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+ depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
@@ -214,7 +226,7 @@
config VIDEO_ZR36120
tristate "Zoran ZR36120/36125 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C && BROKEN
+ depends on PCI && I2C && VIDEO_V4L1 && BROKEN
help
Support for ZR36120/ZR36125 based frame grabber/overlay boards.
This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
@@ -226,7 +238,7 @@
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on VIDEO_DEV && PCI && SONYPI
+ depends on PCI && SONYPI && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
@@ -242,7 +254,7 @@
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
select VIDEO_TUNER
---help---
@@ -254,8 +266,9 @@
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the 'dpc7146 demonstration
board' by Philips-Semiconductors. It's the reference design
@@ -268,8 +281,9 @@
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
@@ -279,8 +293,9 @@
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
- depends on VIDEO_DEV && PCI
+ depends on PCI && VIDEO_V4L1
select VIDEO_SAA7146_VV
+ select VIDEO_V4L2
---help---
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
@@ -293,7 +308,7 @@
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support"
- depends on VIDEO_DEV && I2C
+ depends on I2C && VIDEO_V4L1
---help---
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
@@ -304,7 +319,7 @@
config VIDEO_M32R_AR
tristate "AR devices"
- depends on M32R
+ depends on M32R && VIDEO_V4L1
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
@@ -365,17 +380,17 @@
source "drivers/media/video/cx25840/Kconfig"
config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ tristate "Philips SAA7113/4/5 video decoders (OBSOLETED)"
+ depends on VIDEO_V4L1 && I2C && EXPERIMENTAL
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Old support for the Philips SAA7113/4 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Philips SAA7127/9 digital video encoders.
@@ -384,7 +399,7 @@
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
@@ -396,7 +411,7 @@
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
@@ -418,7 +433,7 @@
config USB_DSBR
tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
---help---
Say Y here if you want to connect this type of radio to your
computer's USB port. Note that the audio is not digital, and
@@ -434,7 +449,7 @@
config USB_OV511
tristate "USB OV511 Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -445,7 +460,7 @@
config USB_SE401
tristate "USB SE401 Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -458,7 +473,7 @@
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
@@ -470,7 +485,7 @@
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_DEV && I2C
+ depends on USB && VIDEO_V4L1 && I2C
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index b3ea2d6..e5bf268 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,7 +10,11 @@
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
-obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
+
+ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
+ obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
+endif
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
@@ -84,4 +88,8 @@
obj-$(CONFIG_USB_KONICAWC) += usbvideo/
obj-$(CONFIG_USB_VICAM) += usbvideo/
+obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+extra-cflags-$(CONFIG_VIDEO_V4L1_COMPAT) += -DCONFIG_VIDEO_V4L1_COMPAT
+
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 085477c..153f6a4 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_BT848
tristate "BT848 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
+ depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile
index db641a3..a096a03 100644
--- a/drivers/media/video/bt8xx/Makefile
+++ b/drivers/media/video/bt8xx/Makefile
@@ -8,5 +8,5 @@
obj-$(CONFIG_VIDEO_BT848) += bttv.o
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/media/video
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f209a74..2b64aa8 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2991,13 +2991,13 @@
if (UNSET != audiomux[0]) {
gpiobits = 0;
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 4; i++) {
bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
gpiobits |= audiomux[i];
}
} else {
gpiobits = audioall;
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 4; i++) {
bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
}
}
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 16323a5..afcfe71 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -233,7 +233,7 @@
const struct bttv_format *fmt, struct bttv_overlay *ov,
int skip_even, int skip_odd)
{
- int instructions,rc,line,maxy,start,end,skip,nskips;
+ int dwords,rc,line,maxy,start,end,skip,nskips;
struct btcx_skiplist *skips;
u32 *rp,ri,ra;
u32 addr;
@@ -242,12 +242,12 @@
if (NULL == (skips = kmalloc(sizeof(*skips) * ov->nclips,GFP_KERNEL)))
return -ENOMEM;
- /* estimate risc mem: worst case is (clip+1) * lines instructions
+ /* estimate risc mem: worst case is (1.5*clip+1) * lines instructions
+ sync + jump (all 2 dwords) */
- instructions = (ov->nclips + 1) *
- ((skip_even || skip_odd) ? ov->w.height>>1 : ov->w.height);
- instructions += 2;
- if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions*8)) < 0) {
+ dwords = (3 * ov->nclips + 2) *
+ ((skip_even || skip_odd) ? (ov->w.height+1)>>1 : ov->w.height);
+ dwords += 4;
+ if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,dwords*4)) < 0) {
kfree(skips);
return rc;
}
@@ -276,8 +276,6 @@
if (line > maxy)
btcx_calc_skips(line, ov->w.width, &maxy,
skips, &nskips, ov->clips, ov->nclips);
- else
- nskips = 0;
/* write out risc code */
for (start = 0, skip = 0; start < ov->w.width; start = end) {
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
index f59ced1..1958d40 100644
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -39,29 +39,12 @@
#define FWDEV(x) &((x)->adapter->dev)
-static int fastfw = 1;
static char *firmware = FWFILE;
-module_param(fastfw, bool, 0444);
module_param(firmware, charp, 0444);
-MODULE_PARM_DESC(fastfw, "Load firmware fast [0=100MHz 1=333MHz (default)]");
MODULE_PARM_DESC(firmware, "Firmware image [default: " FWFILE "]");
-static void set_i2c_delay(struct i2c_client *client, int delay)
-{
- struct i2c_algo_bit_data *algod = client->adapter->algo_data;
-
- /* We aren't guaranteed to be using algo_bit,
- * so avoid the null pointer dereference
- * and disable the 'fast firmware load' */
- if (algod) {
- algod->udelay = delay;
- } else {
- fastfw = 0;
- }
-}
-
static void start_fw_load(struct i2c_client *client)
{
/* DL_ADDR_LB=0 DL_ADDR_HB=0 */
@@ -71,16 +54,10 @@
cx25840_write(client, 0x803, 0x0b);
/* AUTO_INC_DIS=1 */
cx25840_write(client, 0x000, 0x20);
-
- if (fastfw)
- set_i2c_delay(client, 3);
}
static void end_fw_load(struct i2c_client *client)
{
- if (fastfw)
- set_i2c_delay(client, 10);
-
/* AUTO_INC_DIS=0 */
cx25840_write(client, 0x000, 0x00);
/* DL_ENABLE=0 */
@@ -107,30 +84,8 @@
int sent;
if ((sent = i2c_master_send(client, data, size)) < size) {
-
- if (fastfw) {
- v4l_err(client, "333MHz i2c firmware load failed\n");
- fastfw = 0;
- set_i2c_delay(client, 10);
-
- if (sent > 2) {
- u16 dl_addr = cx25840_read(client, 0x801) << 8;
- dl_addr |= cx25840_read(client, 0x800);
- dl_addr -= sent - 2;
- cx25840_write(client, 0x801, dl_addr >> 8);
- cx25840_write(client, 0x800, dl_addr & 0xff);
- }
-
- if (i2c_master_send(client, data, size) < size) {
- v4l_err(client, "100MHz i2c firmware load failed\n");
- return -ENOSYS;
- }
-
- } else {
- v4l_err(client, "firmware load i2c failure\n");
- return -ENOSYS;
- }
-
+ v4l_err(client, "firmware load i2c failure\n");
+ return -ENOSYS;
}
return 0;
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index c7042cf..f80154b 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -564,7 +564,7 @@
},
[CX88_BOARD_PCHDTV_HD3000] = {
.name = "pcHDTV HD3000 HDTV",
- .tuner_type = TUNER_THOMSON_DTT7610,
+ .tuner_type = TUNER_THOMSON_DTT761X,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 2c3d9f1..e1092d5 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -146,9 +146,11 @@
fields++;
/* estimate risc mem: worst case is one write per page border +
- one write per scan line + syncs + jump (all 2 dwords) */
- instructions = (bpl * lines * fields) / PAGE_SIZE + lines * fields;
- instructions += 3 + 4;
+ one write per scan line + syncs + jump (all 2 dwords). Padding
+ can cause next bpl to start close to a page border. First DMA
+ region may be smaller than PAGE_SIZE */
+ instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
+ instructions += 2;
if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
return rc;
@@ -176,9 +178,11 @@
int rc;
/* estimate risc mem: worst case is one write per page border +
- one write per scan line + syncs + jump (all 2 dwords) */
- instructions = (bpl * lines) / PAGE_SIZE + lines;
- instructions += 3 + 4;
+ one write per scan line + syncs + jump (all 2 dwords). Here
+ there is no padding and no sync. First DMA region may be smaller
+ than PAGE_SIZE */
+ instructions = 1 + (bpl * lines) / PAGE_SIZE + lines;
+ instructions += 1;
if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
return rc;
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index f0ea9b5..3619a44 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -372,7 +372,7 @@
static struct or51132_config pchdtv_hd3000 = {
.demod_address = 0x15,
.pll_address = 0x61,
- .pll_desc = &dvb_pll_thomson_dtt7610,
+ .pll_desc = &dvb_pll_thomson_dtt761x,
.set_ts_params = or51132_set_ts_param,
};
#endif
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 72a417b..694d1d8 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -35,8 +35,10 @@
#include "cx88.h"
#include <media/v4l2-common.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Include V4L1 specific functions. Should be removed soon */
#include <linux/videodev.h>
+#endif
MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5a793ae..dfb15bf 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_EM28XX
tristate "Empia EM2800/2820/2840 USB video capture support"
- depends on VIDEO_DEV && USB && I2C
+ depends on VIDEO_V4L1 && USB && I2C
select VIDEO_BUF
select VIDEO_TUNER
select VIDEO_TVEEPROM
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index ddc92cb..cf7cdf9 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1576,8 +1576,8 @@
errCode = em28xx_config(dev);
if (errCode) {
em28xx_errdev("error configuring device\n");
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENOMEM;
}
@@ -1603,8 +1603,8 @@
dev->vdev = video_device_alloc();
if (NULL == dev->vdev) {
em28xx_errdev("cannot allocate video_device.\n");
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENOMEM;
}
@@ -1612,8 +1612,8 @@
if (NULL == dev->vbi_dev) {
em28xx_errdev("cannot allocate video_device.\n");
kfree(dev->vdev);
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENOMEM;
}
@@ -1650,8 +1650,8 @@
mutex_unlock(&dev->lock);
list_del(&dev->devlist);
video_device_release(dev->vdev);
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENODEV;
}
@@ -1662,8 +1662,8 @@
list_del(&dev->devlist);
video_device_release(dev->vbi_dev);
video_device_release(dev->vdev);
- kfree(dev);
em28xx_devused&=~(1<<dev->devno);
+ kfree(dev);
return -ENODEV;
} else {
printk("registered VBI\n");
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index 6c43a90..c6bff70 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,6 +1,6 @@
config USB_ET61X251
tristate "USB ET61X[12]51 PC Camera Controller support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on Etoms ET61X151
or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 8637655..53cbc95 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,6 @@
config USB_PWC
tristate "USB Philips Cameras"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y or M here if you want to use one of these Philips & OEM
webcams:
diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile
index 8326684..33d6012 100644
--- a/drivers/media/video/pwc/Makefile
+++ b/drivers/media/video/pwc/Makefile
@@ -1,20 +1,3 @@
-ifneq ($(KERNELRELEASE),)
-
pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o
obj-$(CONFIG_USB_PWC) += pwc.o
-
-else
-
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default:
- $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-
-endif
-
-clean:
- rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
- rm -rf .tmp_versions
-
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 133f9e5..c271e2e 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -142,6 +142,7 @@
static const struct i2c_reg_value saa7129_init_config_extra[] = {
{ SAA7127_REG_OUTPUT_PORT_CONTROL, 0x38 },
{ SAA7127_REG_VTRIG, 0xfa },
+ { 0, 0 }
};
static const struct i2c_reg_value saa7127_init_config_common[] = {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index e666a446..86eae35 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3504,6 +3504,7 @@
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+ break;
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* this turns the remote control chip off to work around a bug in it */
saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 13de055..f0c2111 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -548,6 +548,8 @@
if (report & SAA7134_IRQ_REPORT_GPIO16) {
switch (dev->has_remote) {
case SAA7134_REMOTE_GPIO:
+ if (!dev->remote)
+ break;
if (dev->remote->mask_keydown & 0x10000) {
saa7134_input_irq(dev);
}
@@ -564,6 +566,8 @@
if (report & SAA7134_IRQ_REPORT_GPIO18) {
switch (dev->has_remote) {
case SAA7134_REMOTE_GPIO:
+ if (!dev->remote)
+ break;
if ((dev->remote->mask_keydown & 0x40000) ||
(dev->remote->mask_keyup & 0x40000)) {
saa7134_input_irq(dev);
@@ -676,7 +680,7 @@
SAA7134_IRQ2_INTE_PE |
SAA7134_IRQ2_INTE_AR;
- if (dev->has_remote == SAA7134_REMOTE_GPIO) {
+ if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
if (dev->remote->mask_keydown & 0x10000)
irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
else if (dev->remote->mask_keydown & 0x40000)
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index aeef80f..e4156ec 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -31,8 +31,10 @@
#include "saa7134.h"
#include <media/v4l2-common.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
/* Include V4L1 specific functions. Should be removed soon */
#include <linux/videodev.h>
+#endif
/* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index 55f2bc1..cf552e6 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,6 +1,6 @@
config USB_SN9C102
tristate "USB SN9C10x PC Camera Controller support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on SONiX SN9C101,
SN9C102 or SN9C103 PC Camera Controllers.
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index 72e0f01d..a1ae036 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -877,8 +877,8 @@
/* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */
static struct tuner_range tuner_tua6034_ntsc_ranges[] = {
- { 16 * 160.00 /*MHz*/, 0x8e, 0x01 },
- { 16 * 455.00 /*MHz*/, 0x8e, 0x02 },
+ { 16 * 165.00 /*MHz*/, 0x8e, 0x01 },
+ { 16 * 450.00 /*MHz*/, 0x8e, 0x02 },
{ 16 * 999.99 , 0x8e, 0x04 },
};
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 431c3e2..b463e99 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -218,7 +218,7 @@
/* 110-119 */
{ TUNER_ABSENT, "Thompson DTT75105"},
{ TUNER_ABSENT, "Conexant_CX24109"},
- { TUNER_ABSENT, "TCL M2523_5N_E"},
+ { TUNER_TCL_2002N, "TCL M2523_5N_E"},
{ TUNER_ABSENT, "TCL M2523_3DB_E"},
{ TUNER_ABSENT, "Philips 8275A"},
{ TUNER_ABSENT, "Microtune MT2060"},
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index 08a5d20..39269a2 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@
config USB_VICAM
tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
- depends on USB && VIDEO_DEV && EXPERIMENTAL
+ depends on USB && VIDEO_V4L1 && EXPERIMENTAL
select VIDEO_USBVIDEO
---help---
Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@
config USB_IBMCAM
tristate "USB IBM (Xirlink) C-it Camera support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@
config USB_KONICAWC
tristate "USB Konica Webcam support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
select VIDEO_USBVIDEO
---help---
Say Y here if you want support for webcams based on a Konica
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 5e81340..779db26 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -26,6 +26,11 @@
#include <linux/random.h>
#include <linux/version.h>
#include <linux/videodev2.h>
+#include <linux/dma-mapping.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+/* Include V4L1 specific functions. Should be removed soon */
+#include <linux/videodev.h>
+#endif
#include <linux/interrupt.h>
#include <media/video-buf.h>
#include <media/v4l2-common.h>
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index c3bf886..115833e 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,6 +1,6 @@
config USB_ZC0301
tristate "USB ZC0301 Image Processor and Control Chip support"
- depends on USB && VIDEO_DEV
+ depends on USB && VIDEO_V4L1
---help---
Say Y here if you want support for cameras based on the ZC0301
Image Processor and Control Chip.
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index 914d62b..5dc4bee 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -310,7 +310,7 @@
}
else
data->bytes_xfered =
- (data->blocks * (1 << data->blksz_bits)) -
+ (data->blocks * data->blksz) -
host->pio.len;
}
@@ -575,7 +575,7 @@
au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
{
- int datalen = data->blocks * (1 << data->blksz_bits);
+ int datalen = data->blocks * data->blksz;
if (dma != 0)
host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@
if (host->dma.len == 0)
return MMC_ERR_TIMEOUT;
- au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+ au_writel(data->blksz - 1, HOST_BLKSIZE(host));
if (host->flags & HOST_F_DMA) {
int i;
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index 79358e22..a4eb1d0 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -218,8 +218,10 @@
if(!loops)
return 0;
- dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
- loops, where, *pstat, stat_mask);
+ /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+ if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+ dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+ loops, where, *pstat, stat_mask);
return loops;
}
@@ -333,6 +335,9 @@
WARN_ON(host->cmd != NULL);
host->cmd = cmd;
+ /* Ensure, that clock are stopped else command programming and start fails */
+ imxmci_stop_clock(host);
+
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMD_DAT_CONT_BUSY;
@@ -553,7 +558,7 @@
int trans_done = 0;
unsigned int stat = *pstat;
- if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+ if(host->actual_bus_width != MMC_BUS_WIDTH_4)
burst_len = 16;
else
burst_len = 64;
@@ -591,8 +596,7 @@
stat = MMC_STATUS;
/* Flush extra bytes from FIFO */
- while(flush_len >= 2){
- flush_len -= 2;
+ while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
i = MMC_BUFFER_ACCESS;
stat = MMC_STATUS;
stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -746,10 +750,6 @@
data_dir_mask = STATUS_DATA_TRANS_DONE;
}
- imxmci_busy_wait_for_status(host, &stat,
- data_dir_mask,
- 50, "imxmci_tasklet_fnc data");
-
if(stat & data_dir_mask) {
clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
imxmci_data_done(host, stat);
@@ -865,7 +865,11 @@
imxmci_stop_clock(host);
MMC_CLK_RATE = (prescaler<<3) | clk;
- imxmci_start_clock(host);
+ /*
+ * Under my understanding, clock should not be started there, because it would
+ * initiate SDHC sequencer and send last or random command into card
+ */
+ /*imxmci_start_clock(host);*/
dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
} else {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 1ca2c8b..6201f30 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -951,6 +951,7 @@
data.timeout_ns = card->csd.tacc_ns * 10;
data.timeout_clks = card->csd.tacc_clks * 10;
data.blksz_bits = 3;
+ data.blksz = 1 << 3;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 06bd1f4..587458b 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -175,6 +175,7 @@
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
+ brq.data.blksz = 1 << md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
@@ -352,7 +353,7 @@
*/
printk(KERN_ERR "%s: unable to select block size for "
"writing (rb%u wb%u rp%u wp%u)\n",
- md->disk->disk_name,
+ mmc_card_id(card),
1 << card->csd.read_blkbits,
1 << card->csd.write_blkbits,
card->csd.read_partial,
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index f97b472..b49368f 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -119,7 +119,7 @@
nob = 0xffff;
writel(nob, host->base + MMC_NOB);
- writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+ writel(data->blksz, host->base + MMC_BLKLEN);
clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
do_div(clks, 1000000000UL);
@@ -283,7 +283,7 @@
* data blocks as being in error.
*/
if (data->error == MMC_ERR_NONE)
- data->bytes_xfered = data->blocks << data->blksz_bits;
+ data->bytes_xfered = data->blocks * data->blksz;
else
data->bytes_xfered = 0;
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 39b3d97..8167332 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -662,14 +662,14 @@
unsigned long dmaflags;
DBGF("blksz %04x blks %04x flags %08x\n",
- 1 << data->blksz_bits, data->blocks, data->flags);
+ data->blksz, data->blocks, data->flags);
DBGF("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
/*
* Calculate size.
*/
- host->size = data->blocks << data->blksz_bits;
+ host->size = data->blocks * data->blksz;
/*
* Check timeout values for overflow.
@@ -696,12 +696,12 @@
* Two bytes are needed for each data line.
*/
if (host->bus_width == MMC_BUS_WIDTH_1) {
- blksize = (1 << data->blksz_bits) + 2;
+ blksize = data->blksz + 2;
wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
} else if (host->bus_width == MMC_BUS_WIDTH_4) {
- blksize = (1 << data->blksz_bits) + 2 * 4;
+ blksize = data->blksz + 2 * 4;
wbsd_write_index(host, WBSD_IDX_PBSMSB,
((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ca99e2..54161ae 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -55,8 +55,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.4.39"
-#define DRV_MODULE_RELDATE "March 22, 2006"
+#define DRV_MODULE_VERSION "1.4.40"
+#define DRV_MODULE_RELDATE "May 22, 2006"
#define RUN_AT(x) (jiffies + (x))
@@ -2945,7 +2945,7 @@
int buf_size)
{
u32 written, offset32, len32;
- u8 *buf, start[4], end[4];
+ u8 *buf, start[4], end[4], *flash_buffer = NULL;
int rc = 0;
int align_start, align_end;
@@ -2985,12 +2985,19 @@
memcpy(buf + align_start, data_buf, buf_size);
}
+ if (bp->flash_info->buffered == 0) {
+ flash_buffer = kmalloc(264, GFP_KERNEL);
+ if (flash_buffer == NULL) {
+ rc = -ENOMEM;
+ goto nvram_write_end;
+ }
+ }
+
written = 0;
while ((written < len32) && (rc == 0)) {
u32 page_start, page_end, data_start, data_end;
u32 addr, cmd_flags;
int i;
- u8 flash_buffer[264];
/* Find the page_start addr */
page_start = offset32 + written;
@@ -3061,7 +3068,7 @@
}
/* Loop to write the new data from data_start to data_end */
- for (addr = data_start; addr < data_end; addr += 4, i++) {
+ for (addr = data_start; addr < data_end; addr += 4, i += 4) {
if ((addr == page_end - 4) ||
((bp->flash_info->buffered) &&
(addr == data_end - 4))) {
@@ -3109,6 +3116,9 @@
}
nvram_write_end:
+ if (bp->flash_info->buffered == 0)
+ kfree(flash_buffer);
+
if (align_start || align_end)
kfree(buf);
return rc;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index c99e878..ed15fca 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -220,6 +220,7 @@
static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
static int e1000_resume(struct pci_dev *pdev);
#endif
+static void e1000_shutdown(struct pci_dev *pdev);
#ifdef CONFIG_NET_POLL_CONTROLLER
/* for netdump / net console */
@@ -235,8 +236,9 @@
/* Power Managment Hooks */
#ifdef CONFIG_PM
.suspend = e1000_suspend,
- .resume = e1000_resume
+ .resume = e1000_resume,
#endif
+ .shutdown = e1000_shutdown
};
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -4611,6 +4613,12 @@
return 0;
}
#endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ e1000_suspend(pdev, PMSG_SUSPEND);
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling 'interrupt' - used by things like netconsole to send skbs
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index f7235c9..705e122 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2891,78 +2891,6 @@
goto out_drain;
}
- if (np->msi_flags & NV_MSI_X_CAPABLE) {
- for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
- np->msi_x_entry[i].entry = i;
- }
- if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
- np->msi_flags |= NV_MSI_X_ENABLED;
- if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
- /* Request irq for rx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
- /* Request irq for tx handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
- /* Request irq for link and timer handling */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
-
- /* map interrupts to their respective vector */
- writel(0, base + NvRegMSIXMap0);
- writel(0, base + NvRegMSIXMap1);
- set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
- set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
- set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
- } else {
- /* Request irq for all interrupts */
- if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
- pci_disable_msix(np->pci_dev);
- np->msi_flags &= ~NV_MSI_X_ENABLED;
- goto out_drain;
- }
-
- /* map interrupts to vector 0 */
- writel(0, base + NvRegMSIXMap0);
- writel(0, base + NvRegMSIXMap1);
- }
- }
- }
- if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
- if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
- np->msi_flags |= NV_MSI_ENABLED;
- if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
- printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
- pci_disable_msi(np->pci_dev);
- np->msi_flags &= ~NV_MSI_ENABLED;
- goto out_drain;
- }
-
- /* map interrupts to vector 0 */
- writel(0, base + NvRegMSIMap0);
- writel(0, base + NvRegMSIMap1);
- /* enable msi vector 0 */
- writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
- }
- }
- if (ret != 0) {
- if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
- goto out_drain;
- }
-
/* ask for interrupts */
nv_enable_hw_interrupts(dev, np->irqmask);
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 5e6d007..cff8598 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -33,7 +33,7 @@
config ESI_DONGLE
tristate "ESI JetEye PC dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Extended Systems
JetEye PC dongle. To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@
config ACTISYS_DONGLE
tristate "ACTiSYS IR-220L and IR220L+ dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the ACTiSYS IR-220L and
IR220L+ dongles. To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@
config TEKRAM_DONGLE
tristate "Tekram IrMate 210B dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Tekram IrMate 210B
dongle. To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@
config TOIM3232_DONGLE
tristate "TOIM3232 IrDa dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Vishay/Temic
TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@
config LITELINK_DONGLE
tristate "Parallax LiteLink dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Parallax Litelink
dongle. To compile it as a module, choose M here. The Parallax
@@ -85,7 +85,7 @@
config MA600_DONGLE
tristate "Mobile Action MA600 dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Mobile Action MA600
dongle. To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@
config GIRBIL_DONGLE
tristate "Greenwich GIrBIL dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Greenwich GIrBIL
dongle. If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@
config MCP2120_DONGLE
tristate "Microchip MCP2120"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Microchip MCP2120
dongle. If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@
config OLD_BELKIN_DONGLE
tristate "Old Belkin dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
@@ -132,7 +132,7 @@
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the ACTiSYS IR-200L
dongle. If you want to compile it as a module, choose M here.
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 448a094..2ea66ac 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1691,17 +1691,6 @@
memset(ei_local->mcfilter, 0xFF, 8);
}
- /*
- * DP8390 manuals don't specify any magic sequence for altering
- * the multicast regs on an already running card. To be safe, we
- * ensure multicast mode is off prior to loading up the new hash
- * table. If this proves to be not enough, we can always resort
- * to stopping the NIC, loading the table and then restarting.
- */
-
- if (netif_running(dev))
- outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
-
outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
for(i = 0; i < 8; i++)
{
@@ -1715,6 +1704,8 @@
outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
else
outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+
+ outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
}
/*
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 07c31f1..fc08c4a 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1774,8 +1774,6 @@
lp->rx_dma_addr[i] = 0;
}
- pcnet32_free_ring(dev);
-
/*
* Switch back to 16bit mode to avoid problems with dumb
* DOS packet driver after a warm reboot
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a70c2b0..5ca5a1b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,8 +78,7 @@
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
- { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
- { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) }, /* DGE-530T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
@@ -402,7 +401,7 @@
int err;
if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
- p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+ p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
return -EINVAL;
skge->rx_ring.count = p->rx_pending;
@@ -2717,8 +2716,7 @@
if (control & BMU_OWN)
break;
- skb = skge_rx_get(skge, e, control, rd->status,
- le16_to_cpu(rd->csum2));
+ skb = skge_rx_get(skge, e, control, rd->status, rd->csum2);
if (likely(skb)) {
dev->last_rx = jiffies;
netif_receive_skb(skb);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 62be6d9..9591096 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.3"
+#define DRV_VERSION "1.4"
#define PFX DRV_NAME " "
/*
@@ -105,6 +105,7 @@
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -235,6 +236,7 @@
}
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
reg1 &= P_ASPM_CONTROL_MSK;
@@ -306,7 +308,7 @@
u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
if (sky2->autoneg == AUTONEG_ENABLE &&
- (hw->chip_id != CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+ !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -977,6 +979,7 @@
struct sky2_hw *hw = sky2->hw;
unsigned rxq = rxqaddr[sky2->port];
int i;
+ unsigned thresh;
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
@@ -1001,9 +1004,21 @@
sky2_rx_add(sky2, re->mapaddr);
}
- /* Truncate oversize frames */
- sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
- sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
+ /*
+ * The receiver hangs if it receives frames larger than the
+ * packet buffer. As a workaround, truncate oversize frames, but
+ * the register is limited to 9 bits, so if you do frames > 2052
+ * you better get the MTU right!
+ */
+ thresh = (sky2->rx_bufsize - 8) / sizeof(u32);
+ if (thresh > 0x1ff)
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
+ else {
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+ }
+
/* Tell chip about available buffers */
sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
@@ -1020,19 +1035,26 @@
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
u32 ramsize, rxspace, imask;
- int err;
+ int cap, err = -ENOMEM;
struct net_device *otherdev = hw->dev[sky2->port^1];
- /* Block bringing up both ports at the same time on a dual port card.
- * There is an unfixed bug where receiver gets confused and picks up
- * packets out of order. Until this is fixed, prevent data corruption.
+ /*
+ * On dual port PCI-X card, there is an problem where status
+ * can be received out of order due to split transactions
*/
- if (otherdev && netif_running(otherdev)) {
- printk(KERN_INFO PFX "dual port support is disabled.\n");
- return -EBUSY;
- }
+ if (otherdev && netif_running(otherdev) &&
+ (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+ struct sky2_port *osky2 = netdev_priv(otherdev);
+ u16 cmd;
- err = -ENOMEM;
+ cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ cmd &= ~PCI_X_CMD_MAX_SPLIT;
+ sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
+ sky2->rx_csum = 0;
+ osky2->rx_csum = 0;
+ }
+
if (netif_msg_ifup(sky2))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
@@ -1910,6 +1932,12 @@
}
}
+/* Is status ring empty or is there more to do? */
+static inline int sky2_more_work(const struct sky2_hw *hw)
+{
+ return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
+}
+
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do)
{
@@ -2182,19 +2210,19 @@
if (status & Y2_IS_CHK_TXA2)
sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
- if (status & Y2_IS_STAT_BMU)
- sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-
work_done = sky2_status_intr(hw, work_limit);
*budget -= work_done;
dev0->quota -= work_done;
- if (work_done >= work_limit)
+ if (status & Y2_IS_STAT_BMU)
+ sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+
+ if (sky2_more_work(hw))
return 1;
netif_rx_complete(dev0);
- status = sky2_read32(hw, B0_Y2_SP_LISR);
+ sky2_read32(hw, B0_Y2_SP_LISR);
return 0;
}
@@ -3078,12 +3106,7 @@
sky2->duplex = -1;
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
-
- /* Receive checksum disabled for Yukon XL
- * because of observed problems with incorrect
- * values when multiple packets are received in one interrupt
- */
- sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+ sky2->rx_csum = 1;
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 8012994..8a0bc55 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -214,6 +214,8 @@
enum {
Y2_VMAIN_AVAIL = 1<<17,/* VMAIN available (YUKON-2 only) */
Y2_VAUX_AVAIL = 1<<16,/* VAUX available (YUKON-2 only) */
+ Y2_HW_WOL_ON = 1<<15,/* HW WOL On (Yukon-EC Ultra A1 only) */
+ Y2_HW_WOL_OFF = 1<<14,/* HW WOL On (Yukon-EC Ultra A1 only) */
Y2_ASF_ENABLE = 1<<13,/* ASF Unit Enable (YUKON-2 only) */
Y2_ASF_DISABLE = 1<<12,/* ASF Unit Disable (YUKON-2 only) */
Y2_CLK_RUN_ENA = 1<<11,/* CLK_RUN Enable (YUKON-2 only) */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e1b33a2..49ad60b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.57"
-#define DRV_MODULE_RELDATE "Apr 28, 2006"
+#define DRV_MODULE_VERSION "3.58"
+#define DRV_MODULE_RELDATE "May 22, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -6488,6 +6488,10 @@
TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
+
+ TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
+ TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+ TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
}
static void tg3_timer(unsigned long __opaque)
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index ba05ded..136a70c 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -850,7 +850,7 @@
break;
skb->dev = dev; /* Mark as being used by this device. */
np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
- skb->len,PCI_DMA_FROMDEVICE);
+ np->rx_buf_sz,PCI_DMA_FROMDEVICE);
np->rx_ring[i].buffer1 = np->rx_addr[i];
np->rx_ring[i].status = DescOwn;
@@ -1316,7 +1316,7 @@
skb->dev = dev; /* Mark as being used by this device. */
np->rx_addr[entry] = pci_map_single(np->pci_dev,
skb->data,
- skb->len, PCI_DMA_FROMDEVICE);
+ np->rx_buf_sz, PCI_DMA_FROMDEVICE);
np->rx_ring[entry].buffer1 = np->rx_addr[entry];
}
wmb();
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index a6dc53b..fdc2103 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -491,8 +491,6 @@
u8 tx_thresh, rx_thresh;
struct mii_if_info mii_if;
- struct work_struct tx_timeout_task;
- struct work_struct check_media_task;
void __iomem *base;
};
@@ -500,8 +498,6 @@
static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
static int rhine_open(struct net_device *dev);
static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
static void rhine_tx(struct net_device *dev);
@@ -856,12 +852,6 @@
if (rp->quirks & rqRhineI)
dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
- INIT_WORK(&rp->tx_timeout_task,
- (void (*)(void *))rhine_tx_timeout_task, dev);
-
- INIT_WORK(&rp->check_media_task,
- (void (*)(void *))rhine_check_media_task, dev);
-
/* dev->name not defined before register_netdev()! */
rc = register_netdev(dev);
if (rc)
@@ -1108,11 +1098,6 @@
netif_carrier_ok(mii->dev));
}
-static void rhine_check_media_task(struct net_device *dev)
-{
- rhine_check_media(dev, 0);
-}
-
static void init_registers(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
@@ -1166,8 +1151,8 @@
if (quirks & rqRhineI) {
iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
- /* Do not call from ISR! */
- msleep(1);
+ /* Can be called from ISR. Evil. */
+ mdelay(1);
/* 0x80 must be set immediately before turning it off */
iowrite8(0x80, ioaddr + MIICmd);
@@ -1257,16 +1242,6 @@
static void rhine_tx_timeout(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
-
- /*
- * Move bulk of work outside of interrupt context
- */
- schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
-{
- struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1677,7 +1652,7 @@
spin_lock(&rp->lock);
if (intr_status & IntrLinkChange)
- schedule_work(&rp->check_media_task);
+ rhine_check_media(dev, 0);
if (intr_status & IntrStatsMax) {
rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1927,9 +1902,6 @@
spin_unlock_irq(&rp->lock);
free_irq(rp->pdev->irq, dev);
-
- flush_scheduled_work();
-
free_rbufs(dev);
free_tbufs(dev);
free_ring(dev);
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index 0e1ac33..bed6823 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1838,7 +1838,7 @@
}
#ifdef MODULE
-int init_module(void)
+int __init init_module(void)
{
int i = 0;
@@ -1860,7 +1860,7 @@
}
-void cleanup_module(void)
+void __exit cleanup_module(void)
{
int i = 0;
struct net_device *dev;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index e2982a8..7ed18ca 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3271,6 +3271,9 @@
bcm43xx_sysfs_register(bcm);
//FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
+ /*FIXME: This should be handled by softmac instead. */
+ schedule_work(&bcm->softmac->associnfo.work);
+
assert(err == 0);
out:
return err;
@@ -3946,9 +3949,6 @@
netif_device_attach(net_dev);
- /*FIXME: This should be handled by softmac instead. */
- schedule_work(&bcm->softmac->associnfo.work);
-
dprintk(KERN_INFO PFX "Device resumed.\n");
return 0;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 06523e2..c2d0b09 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -812,7 +812,6 @@
if (datalen > IEEE80211_DATA_LEN + 12) {
printk(KERN_DEBUG "%s: oversized monitor frame, "
"data length = %d\n", dev->name, datalen);
- err = -EIO;
stats->rx_length_errors++;
goto update_stats;
}
@@ -821,8 +820,7 @@
if (!skb) {
printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
dev->name);
- err = -ENOMEM;
- goto drop;
+ goto update_stats;
}
/* Copy the 802.11 header to the skb */
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index ff192e9..dade4b9 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -4306,7 +4306,7 @@
* Insertion of the module
* I'm now quite proud of the multi-device support.
*/
-int init_module(void)
+int __init init_module(void)
{
int ret = -EIO; /* Return error if no cards found */
int i;
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 6917c6c..c2ecae5 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -33,13 +33,10 @@
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[4];
- struct acpi_buffer output;
- union acpi_object out_obj;
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *out_obj;
u32 osc_dw0;
- /* Setting up output buffer */
- output.length = sizeof(out_obj) + 3*sizeof(u32);
- output.pointer = &out_obj;
/* Setting up input parameters */
input.count = 4;
@@ -61,12 +58,15 @@
"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
return status;
}
- if (out_obj.type != ACPI_TYPE_BUFFER) {
+ out_obj = output.pointer;
+
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG
"Evaluate _OSC returns wrong type\n");
- return AE_TYPE;
+ status = AE_TYPE;
+ goto query_osc_out;
}
- osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+ osc_dw0 = *((u32 *) out_obj->buffer.pointer);
if (osc_dw0) {
if (osc_dw0 & OSC_REQUEST_ERROR)
printk(KERN_DEBUG "_OSC request fails\n");
@@ -76,15 +76,21 @@
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj.buffer.pointer+8));
- return AE_OK;
+ global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8));
+ status = AE_OK;
+ goto query_osc_out;
}
- return AE_ERROR;
+ status = AE_ERROR;
+ goto query_osc_out;
}
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj.buffer.pointer + 8));
- return AE_OK;
+ global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+ status = AE_OK;
+
+query_osc_out:
+ kfree(output.pointer);
+ return status;
}
@@ -96,14 +102,10 @@
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[4];
- struct acpi_buffer output;
- union acpi_object out_obj;
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *out_obj;
u32 osc_dw0;
- /* Setting up output buffer */
- output.length = sizeof(out_obj) + 3*sizeof(u32);
- output.pointer = &out_obj;
-
/* Setting up input parameters */
input.count = 4;
input.pointer = in_params;
@@ -124,12 +126,14 @@
"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
return status;
}
- if (out_obj.type != ACPI_TYPE_BUFFER) {
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG
"Evaluate _OSC returns wrong type\n");
- return AE_TYPE;
+ status = AE_TYPE;
+ goto run_osc_out;
}
- osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+ osc_dw0 = *((u32 *) out_obj->buffer.pointer);
if (osc_dw0) {
if (osc_dw0 & OSC_REQUEST_ERROR)
printk(KERN_DEBUG "_OSC request fails\n");
@@ -139,11 +143,17 @@
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
printk(KERN_DEBUG "_OSC FW not grant req. control\n");
- return AE_SUPPORT;
+ status = AE_SUPPORT;
+ goto run_osc_out;
}
- return AE_ERROR;
+ status = AE_ERROR;
+ goto run_osc_out;
}
- return AE_OK;
+ status = AE_OK;
+
+run_osc_out:
+ kfree(output.pointer);
+ return status;
}
/**
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 16d1ea7..247ab83 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -589,7 +589,7 @@
return 0;
}
-static u_int __init pd6729_isa_scan(void)
+static u_int __devinit pd6729_isa_scan(void)
{
u_int mask0, mask = 0;
int i;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 6c9ad92..2011567 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -141,13 +141,13 @@
/* try the driver's ioctl interface */
if (ops->ioctl) {
err = ops->ioctl(class_dev->dev, cmd, arg);
- if (err != -EINVAL)
+ if (err != -ENOIOCTLCMD)
return err;
}
/* if the driver does not provide the ioctl interface
* or if that particular ioctl was not implemented
- * (-EINVAL), we will try to emulate here.
+ * (-ENOIOCTLCMD), we will try to emulate here.
*/
switch (cmd) {
@@ -233,7 +233,7 @@
break;
default:
- err = -EINVAL;
+ err = -ENOTTY;
break;
}
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 2bc8aad..a997529 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -247,7 +247,7 @@
rtc_freq = arg;
return 0;
}
- return -EINVAL;
+ return -ENOIOCTLCMD;
}
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index e1f7e8e..e1fa5fe 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -71,7 +71,7 @@
return 0;
default:
- return -EINVAL;
+ return -ENOIOCTLCMD;
}
}
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index 4d49fd5..277596c 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -270,7 +270,7 @@
epoch = arg;
break;
default:
- return -EINVAL;
+ return -ENOIOCTLCMD;
}
return 0;
diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c
index af9f212..fe986af 100644
--- a/drivers/s390/net/ctcmain.c
+++ b/drivers/s390/net/ctcmain.c
@@ -1486,13 +1486,13 @@
}
}
-static void
+static void
ch_action_reinit(fsm_instance *fi, int event, void *arg)
{
struct channel *ch = (struct channel *)arg;
struct net_device *dev = ch->netdev;
struct ctc_priv *privptr = dev->priv;
-
+
DBF_TEXT(trace, 4, __FUNCTION__);
ch_action_iofatal(fi, event, arg);
fsm_addtimer(&privptr->restart_timer, 1000, DEV_EVENT_RESTART, dev);
@@ -1624,7 +1624,7 @@
}
dev1 = simple_strtoul(id1, &id1, 16);
dev2 = simple_strtoul(id2, &id2, 16);
-
+
return (dev1 < dev2);
}
@@ -1895,7 +1895,7 @@
irb->scsw.dstat);
return;
}
-
+
priv = ((struct ccwgroup_device *)cdev->dev.driver_data)
->dev.driver_data;
@@ -1909,7 +1909,7 @@
"device %s\n", cdev->dev.bus_id);
return;
}
-
+
dev = (struct net_device *) (ch->netdev);
if (dev == NULL) {
ctc_pr_crit("ctc: ctc_irq_handler dev=NULL bus_id=%s, ch=0x%p\n",
@@ -2008,12 +2008,12 @@
fsm_event(ch->fsm, CH_EVENT_STOP, ch);
}
}
-static void
+static void
dev_action_restart(fsm_instance *fi, int event, void *arg)
{
struct net_device *dev = (struct net_device *)arg;
struct ctc_priv *privptr = dev->priv;
-
+
DBF_TEXT(trace, 3, __FUNCTION__);
ctc_pr_debug("%s: Restarting\n", dev->name);
dev_action_stop(fi, event, arg);
@@ -2193,7 +2193,7 @@
DBF_TEXT(trace, 5, __FUNCTION__);
/* we need to acquire the lock for testing the state
- * otherwise we can have an IRQ changing the state to
+ * otherwise we can have an IRQ changing the state to
* TXIDLE after the test but before acquiring the lock.
*/
spin_lock_irqsave(&ch->collect_lock, saveflags);
@@ -2393,7 +2393,7 @@
/**
* If channels are not running, try to restart them
- * and throw away packet.
+ * and throw away packet.
*/
if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) {
fsm_event(privptr->fsm, DEV_EVENT_START, dev);
@@ -2738,7 +2738,7 @@
/**
* Add ctc specific attributes.
* Add ctc private data.
- *
+ *
* @param cgdev pointer to ccwgroup_device just added
*
* @returns 0 on success, !0 on failure.
@@ -2869,7 +2869,7 @@
DBF_TEXT(setup, 3, buffer);
type = get_channel_type(&cgdev->cdev[0]->id);
-
+
snprintf(read_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id);
snprintf(write_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[1]->dev.bus_id);
@@ -2907,7 +2907,7 @@
channel_get(type, direction == READ ? read_id : write_id,
direction);
if (privptr->channel[direction] == NULL) {
- if (direction == WRITE)
+ if (direction == WRITE)
channel_free(privptr->channel[READ]);
ctc_free_netdevice(dev, 1);
@@ -2955,7 +2955,7 @@
{
struct ctc_priv *priv;
struct net_device *ndev;
-
+
DBF_TEXT(setup, 3, __FUNCTION__);
pr_debug("%s() called\n", __FUNCTION__);
diff --git a/drivers/s390/net/ctctty.c b/drivers/s390/net/ctctty.c
index 5cdcdbf..af54d1d 100644
--- a/drivers/s390/net/ctctty.c
+++ b/drivers/s390/net/ctctty.c
@@ -130,7 +130,7 @@
if ((tty = info->tty)) {
if (info->mcr & UART_MCR_RTS) {
struct sk_buff *skb;
-
+
if ((skb = skb_dequeue(&info->rx_queue))) {
int len = skb->len;
tty_insert_flip_string(tty, skb->data, len);
@@ -328,7 +328,7 @@
{
int skb_res;
struct sk_buff *skb;
-
+
DBF_TEXT(trace, 4, __FUNCTION__);
if (ctc_tty_shuttingdown)
return;
@@ -497,7 +497,7 @@
c = (count < CTC_TTY_XMIT_SIZE) ? count : CTC_TTY_XMIT_SIZE;
if (c <= 0)
break;
-
+
skb_res = info->netdev->hard_header_len + sizeof(info->mcr) +
+ sizeof(__u32);
skb = dev_alloc_skb(skb_res + c);
@@ -828,7 +828,7 @@
if (tty_hung_up_p(filp) ||
(info->flags & CTC_ASYNC_CLOSING)) {
if (info->flags & CTC_ASYNC_CLOSING)
- wait_event(info->close_wait,
+ wait_event(info->close_wait,
!(info->flags & CTC_ASYNC_CLOSING));
#ifdef MODEM_DO_RESTART
if (info->flags & CTC_ASYNC_HUP_NOTIFY)
@@ -1247,7 +1247,7 @@
void
ctc_tty_cleanup(void) {
unsigned long saveflags;
-
+
DBF_TEXT(trace, 2, __FUNCTION__);
spin_lock_irqsave(&ctc_tty_lock, saveflags);
ctc_tty_shuttingdown = 1;
diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c
index b125331..e965f03 100644
--- a/drivers/s390/net/cu3088.c
+++ b/drivers/s390/net/cu3088.c
@@ -20,7 +20,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
-
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/err.h>
@@ -77,7 +77,7 @@
int len;
if (!(end = strchr(start, delim[i])))
- return count;
+ return -EINVAL;
len = min_t(ptrdiff_t, BUS_ID_SIZE, end - start + 1);
strlcpy (bus_ids[i], start, len);
argv[i] = bus_ids[i];
@@ -94,7 +94,7 @@
/* Register-unregister for ctc&lcs */
int
-register_cu3088_discipline(struct ccwgroup_driver *dcp)
+register_cu3088_discipline(struct ccwgroup_driver *dcp)
{
int rc;
@@ -109,7 +109,7 @@
rc = driver_create_file(&dcp->driver, &driver_attr_group);
if (rc)
ccwgroup_driver_unregister(dcp);
-
+
return rc;
}
@@ -137,7 +137,7 @@
cu3088_init (void)
{
int rc;
-
+
cu3088_root_dev = s390_root_dev_register("cu3088");
if (IS_ERR(cu3088_root_dev))
return PTR_ERR(cu3088_root_dev);
diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c
index 6190be9..e0c7deb 100644
--- a/drivers/s390/net/iucv.c
+++ b/drivers/s390/net/iucv.c
@@ -1,4 +1,4 @@
-/*
+/*
* IUCV network driver
*
* Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
@@ -28,7 +28,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
-
+
/* #define DEBUG */
#include <linux/module.h>
@@ -81,7 +81,7 @@
struct bus_type iucv_bus = {
.name = "iucv",
.match = iucv_bus_match,
-};
+};
struct device *iucv_root;
@@ -297,7 +297,7 @@
/*
* Debugging stuff
*******************************************************************************/
-
+
#ifdef DEBUG
static int debuglevel = 0;
@@ -344,7 +344,7 @@
/*
* Internal functions
*******************************************************************************/
-
+
/**
* print start banner
*/
@@ -810,7 +810,7 @@
sizeof (new_handler->id.userid));
EBC_TOUPPER (new_handler->id.userid,
sizeof (new_handler->id.userid));
-
+
if (pgmmask) {
memcpy (new_handler->id.mask, pgmmask,
sizeof (new_handler->id.mask));
@@ -1229,7 +1229,7 @@
/* parm->ipaudit has only 3 bytes */
*audit >>= 8;
}
-
+
release_param(parm);
iucv_debug(1, "b2f0_result = %ld", b2f0_result);
@@ -2330,14 +2330,14 @@
temp_buff1[j] &= (h->id.mask)[j];
temp_buff2[j] &= (h->id.mask)[j];
}
-
+
iucv_dumpit("temp_buff1:",
temp_buff1, sizeof(temp_buff1));
iucv_dumpit("temp_buff2",
temp_buff2, sizeof(temp_buff2));
-
+
if (!memcmp (temp_buff1, temp_buff2, 24)) {
-
+
iucv_debug(2,
"found a matching handler");
break;
@@ -2368,7 +2368,7 @@
} else
iucv_sever(int_buf->ippathid, no_listener);
break;
-
+
case 0x02: /*connection complete */
if (messagesDisabled) {
iucv_setmask(~0);
@@ -2387,7 +2387,7 @@
} else
iucv_sever(int_buf->ippathid, no_listener);
break;
-
+
case 0x03: /* connection severed */
if (messagesDisabled) {
iucv_setmask(~0);
@@ -2398,13 +2398,13 @@
interrupt->ConnectionSevered(
(iucv_ConnectionSevered *)int_buf,
h->pgm_data);
-
+
else
iucv_sever (int_buf->ippathid, no_listener);
} else
iucv_sever(int_buf->ippathid, no_listener);
break;
-
+
case 0x04: /* connection quiesced */
if (messagesDisabled) {
iucv_setmask(~0);
@@ -2420,7 +2420,7 @@
"ConnectionQuiesced not called");
}
break;
-
+
case 0x05: /* connection resumed */
if (messagesDisabled) {
iucv_setmask(~0);
@@ -2436,7 +2436,7 @@
"ConnectionResumed not called");
}
break;
-
+
case 0x06: /* priority message complete */
case 0x07: /* nonpriority message complete */
if (h) {
@@ -2449,7 +2449,7 @@
"MessageComplete not called");
}
break;
-
+
case 0x08: /* priority message pending */
case 0x09: /* nonpriority message pending */
if (h) {
@@ -2467,7 +2467,7 @@
__FUNCTION__);
break;
} /* end switch */
-
+
iucv_debug(2, "exiting pathid %d, type %02X",
int_buf->ippathid, int_buf->iptype);
diff --git a/drivers/s390/net/iucv.h b/drivers/s390/net/iucv.h
index 0c4644d..5b6b1b7 100644
--- a/drivers/s390/net/iucv.h
+++ b/drivers/s390/net/iucv.h
@@ -4,7 +4,7 @@
*
* S390 version
* Copyright (C) 2000 IBM Corporation
- * Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
+ * Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
* Xenia Tkatschow (xenia@us.ibm.com)
*
*
@@ -16,17 +16,17 @@
* CP Programming Services book, also available on the web
* thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
*
- * Definition of Return Codes
- * -All positive return codes including zero are reflected back
- * from CP except for iucv_register_program. The definition of each
- * return code can be found in CP Programming Services book.
- * Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
- * - Return Code of:
- * (-EINVAL) Invalid value
- * (-ENOMEM) storage allocation failed
+ * Definition of Return Codes
+ * -All positive return codes including zero are reflected back
+ * from CP except for iucv_register_program. The definition of each
+ * return code can be found in CP Programming Services book.
+ * Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
+ * - Return Code of:
+ * (-EINVAL) Invalid value
+ * (-ENOMEM) storage allocation failed
* pgmask defined in iucv_register_program will be set depending on input
- * paramters.
- *
+ * paramters.
+ *
*/
#include <linux/types.h>
@@ -124,13 +124,13 @@
#define iucv_handle_t void *
/* flags1:
- * All flags are defined in the field IPFLAGS1 of each function
- * and can be found in CP Programming Services.
- * IPLOCAL - Indicates the connect can only be satisfied on the
- * local system
- * IPPRTY - Indicates a priority message
- * IPQUSCE - Indicates you do not want to receive messages on a
- * path until an iucv_resume is issued
+ * All flags are defined in the field IPFLAGS1 of each function
+ * and can be found in CP Programming Services.
+ * IPLOCAL - Indicates the connect can only be satisfied on the
+ * local system
+ * IPPRTY - Indicates a priority message
+ * IPQUSCE - Indicates you do not want to receive messages on a
+ * path until an iucv_resume is issued
* IPRMDATA - Indicates that the message is in the parameter list
*/
#define IPLOCAL 0x01
@@ -154,14 +154,14 @@
#define AllInterrupts 0xf8
/*
* Mapping of external interrupt buffers should be used with the corresponding
- * interrupt types.
- * Names: iucv_ConnectionPending -> connection pending
+ * interrupt types.
+ * Names: iucv_ConnectionPending -> connection pending
* iucv_ConnectionComplete -> connection complete
- * iucv_ConnectionSevered -> connection severed
- * iucv_ConnectionQuiesced -> connection quiesced
- * iucv_ConnectionResumed -> connection resumed
- * iucv_MessagePending -> message pending
- * iucv_MessageComplete -> message complete
+ * iucv_ConnectionSevered -> connection severed
+ * iucv_ConnectionQuiesced -> connection quiesced
+ * iucv_ConnectionResumed -> connection resumed
+ * iucv_MessagePending -> message pending
+ * iucv_MessageComplete -> message complete
*/
typedef struct {
u16 ippathid;
@@ -260,16 +260,16 @@
uchar res2[3];
} iucv_MessageComplete;
-/*
- * iucv_interrupt_ops_t: Is a vector of functions that handle
- * IUCV interrupts.
- * Parameter list:
- * eib - is a pointer to a 40-byte area described
- * with one of the structures above.
- * pgm_data - this data is strictly for the
- * interrupt handler that is passed by
- * the application. This may be an address
- * or token.
+/*
+ * iucv_interrupt_ops_t: Is a vector of functions that handle
+ * IUCV interrupts.
+ * Parameter list:
+ * eib - is a pointer to a 40-byte area described
+ * with one of the structures above.
+ * pgm_data - this data is strictly for the
+ * interrupt handler that is passed by
+ * the application. This may be an address
+ * or token.
*/
typedef struct {
void (*ConnectionPending) (iucv_ConnectionPending * eib,
@@ -287,8 +287,8 @@
} iucv_interrupt_ops_t;
/*
- *iucv_array_t : Defines buffer array.
- * Inside the array may be 31- bit addresses and 31-bit lengths.
+ *iucv_array_t : Defines buffer array.
+ * Inside the array may be 31- bit addresses and 31-bit lengths.
*/
typedef struct {
u32 address;
@@ -299,19 +299,19 @@
extern struct device *iucv_root;
/* -prototypes- */
-/*
- * Name: iucv_register_program
- * Purpose: Registers an application with IUCV
- * Input: prmname - user identification
+/*
+ * Name: iucv_register_program
+ * Purpose: Registers an application with IUCV
+ * Input: prmname - user identification
* userid - machine identification
* pgmmask - indicates which bits in the prmname and userid combined will be
* used to determine who is given control
- * ops - address of vector of interrupt handlers
- * pgm_data- application data passed to interrupt handlers
- * Output: NA
- * Return: address of handler
+ * ops - address of vector of interrupt handlers
+ * pgm_data- application data passed to interrupt handlers
+ * Output: NA
+ * Return: address of handler
* (0) - Error occurred, registration not completed.
- * NOTE: Exact cause of failure will be recorded in syslog.
+ * NOTE: Exact cause of failure will be recorded in syslog.
*/
iucv_handle_t iucv_register_program (uchar pgmname[16],
uchar userid[8],
@@ -319,13 +319,13 @@
iucv_interrupt_ops_t * ops,
void *pgm_data);
-/*
- * Name: iucv_unregister_program
- * Purpose: Unregister application with IUCV
- * Input: address of handler
- * Output: NA
- * Return: (0) - Normal return
- * (-EINVAL) - Internal error, wild pointer
+/*
+ * Name: iucv_unregister_program
+ * Purpose: Unregister application with IUCV
+ * Input: address of handler
+ * Output: NA
+ * Return: (0) - Normal return
+ * (-EINVAL) - Internal error, wild pointer
*/
int iucv_unregister_program (iucv_handle_t handle);
@@ -333,7 +333,7 @@
* Name: iucv_accept
* Purpose: This function is issued after the user receives a Connection Pending external
* interrupt and now wishes to complete the IUCV communication path.
- * Input: pathid - u16 , Path identification number
+ * Input: pathid - u16 , Path identification number
* msglim_reqstd - u16, The number of outstanding messages requested.
* user_data - uchar[16], Data specified by the iucv_connect function.
* flags1 - int, Contains options for this path.
@@ -358,34 +358,34 @@
void *pgm_data, int *flags1_out, u16 * msglim);
/*
- * Name: iucv_connect
+ * Name: iucv_connect
* Purpose: This function establishes an IUCV path. Although the connect may complete
- * successfully, you are not able to use the path until you receive an IUCV
- * Connection Complete external interrupt.
- * Input: pathid - u16 *, Path identification number
- * msglim_reqstd - u16, Number of outstanding messages requested
- * user_data - uchar[16], 16-byte user data
+ * successfully, you are not able to use the path until you receive an IUCV
+ * Connection Complete external interrupt.
+ * Input: pathid - u16 *, Path identification number
+ * msglim_reqstd - u16, Number of outstanding messages requested
+ * user_data - uchar[16], 16-byte user data
* userid - uchar[8], User identification
- * system_name - uchar[8], 8-byte identifying the system name
+ * system_name - uchar[8], 8-byte identifying the system name
* flags1 - int, Contains options for this path.
* -IPPRTY - 0x20, Specifies if you want to send priority message.
* -IPRMDATA - 0x80, Specifies whether your program can handle a message
* in the parameter list.
- * -IPQUSCE - 0x40, Specifies whether you want to quiesce the path being
+ * -IPQUSCE - 0x40, Specifies whether you want to quiesce the path being
* established.
- * -IPLOCAL - 0X01, Allows an application to force the partner to be on
+ * -IPLOCAL - 0X01, Allows an application to force the partner to be on
* the local system. If local is specified then target class cannot be
- * specified.
+ * specified.
* flags1_out - int * Contains information about the path
* - IPPRTY - 0x20, Indicates you may send priority messages.
* msglim - * u16, Number of outstanding messages
- * handle - iucv_handle_t, Address of handler
- * pgm_data - void *, Application data passed to interrupt handlers
+ * handle - iucv_handle_t, Address of handler
+ * pgm_data - void *, Application data passed to interrupt handlers
* Output: return code from CP IUCV call
* rc - return code from iucv_declare_buffer
- * -EINVAL - Invalid handle passed by application
- * -EINVAL - Pathid address is NULL
- * add_pathid_result - Return code from internal function add_pathid
+ * -EINVAL - Invalid handle passed by application
+ * -EINVAL - Pathid address is NULL
+ * add_pathid_result - Return code from internal function add_pathid
*/
int
iucv_connect (u16 * pathid,
@@ -397,16 +397,16 @@
int *flags1_out,
u16 * msglim, iucv_handle_t handle, void *pgm_data);
-/*
- * Name: iucv_purge
- * Purpose: This function cancels a message that you have sent.
- * Input: pathid - Path identification number.
+/*
+ * Name: iucv_purge
+ * Purpose: This function cancels a message that you have sent.
+ * Input: pathid - Path identification number.
* msgid - Specifies the message ID of the message to be purged.
- * srccls - Specifies the source message class.
- * Output: audit - Contains information about asynchronous error
- * that may have affected the normal completion
- * of this message.
- * Return: Return code from CP IUCV call.
+ * srccls - Specifies the source message class.
+ * Output: audit - Contains information about asynchronous error
+ * that may have affected the normal completion
+ * of this message.
+ * Return: Return code from CP IUCV call.
*/
int iucv_purge (u16 pathid, u32 msgid, u32 srccls, __u32 *audit);
/*
@@ -426,38 +426,38 @@
*/
ulong iucv_query_bufsize (void);
-/*
- * Name: iucv_quiesce
- * Purpose: This function temporarily suspends incoming messages on an
- * IUCV path. You can later reactivate the path by invoking
- * the iucv_resume function.
- * Input: pathid - Path identification number
- * user_data - 16-bytes of user data
- * Output: NA
- * Return: Return code from CP IUCV call.
+/*
+ * Name: iucv_quiesce
+ * Purpose: This function temporarily suspends incoming messages on an
+ * IUCV path. You can later reactivate the path by invoking
+ * the iucv_resume function.
+ * Input: pathid - Path identification number
+ * user_data - 16-bytes of user data
+ * Output: NA
+ * Return: Return code from CP IUCV call.
*/
int iucv_quiesce (u16 pathid, uchar user_data[16]);
-/*
- * Name: iucv_receive
- * Purpose: This function receives messages that are being sent to you
+/*
+ * Name: iucv_receive
+ * Purpose: This function receives messages that are being sent to you
* over established paths. Data will be returned in buffer for length of
* buflen.
- * Input:
- * pathid - Path identification number.
- * buffer - Address of buffer to receive.
- * buflen - Length of buffer to receive.
- * msgid - Specifies the message ID.
- * trgcls - Specifies target class.
- * Output:
+ * Input:
+ * pathid - Path identification number.
+ * buffer - Address of buffer to receive.
+ * buflen - Length of buffer to receive.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
+ * Output:
* flags1_out: int *, Contains information about this path.
* IPNORPY - 0x10 Specifies this is a one-way message and no reply is
- * expected.
- * IPPRTY - 0x20 Specifies if you want to send priority message.
+ * expected.
+ * IPPRTY - 0x20 Specifies if you want to send priority message.
* IPRMDATA - 0x80 specifies the data is contained in the parameter list
* residual_buffer - address of buffer updated by the number
* of bytes you have received.
- * residual_length -
+ * residual_length -
* Contains one of the following values, if the receive buffer is:
* The same length as the message, this field is zero.
* Longer than the message, this field contains the number of
@@ -466,8 +466,8 @@
* count (that is, the number of bytes remaining in the
* message that does not fit into the buffer. In this
* case b2f0_result = 5.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - buffer address is pointing to NULL
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - buffer address is pointing to NULL
*/
int iucv_receive (u16 pathid,
u32 msgid,
@@ -477,16 +477,16 @@
int *flags1_out,
ulong * residual_buffer, ulong * residual_length);
- /*
- * Name: iucv_receive_array
- * Purpose: This function receives messages that are being sent to you
+ /*
+ * Name: iucv_receive_array
+ * Purpose: This function receives messages that are being sent to you
* over established paths. Data will be returned in first buffer for
* length of first buffer.
- * Input: pathid - Path identification number.
+ * Input: pathid - Path identification number.
* msgid - specifies the message ID.
* trgcls - Specifies target class.
- * buffer - Address of array of buffers.
- * buflen - Total length of buffers.
+ * buffer - Address of array of buffers.
+ * buflen - Total length of buffers.
* Output:
* flags1_out: int *, Contains information about this path.
* IPNORPY - 0x10 Specifies this is a one-way message and no reply is
@@ -504,8 +504,8 @@
* count (that is, the number of bytes remaining in the
* message that does not fit into the buffer. In this
* case b2f0_result = 5.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer address is NULL.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
*/
int iucv_receive_array (u16 pathid,
u32 msgid,
@@ -515,44 +515,44 @@
int *flags1_out,
ulong * residual_buffer, ulong * residual_length);
-/*
- * Name: iucv_reject
- * Purpose: The reject function refuses a specified message. Between the
- * time you are notified of a message and the time that you
- * complete the message, the message may be rejected.
- * Input: pathid - Path identification number.
- * msgid - Specifies the message ID.
- * trgcls - Specifies target class.
- * Output: NA
- * Return: Return code from CP IUCV call.
+/*
+ * Name: iucv_reject
+ * Purpose: The reject function refuses a specified message. Between the
+ * time you are notified of a message and the time that you
+ * complete the message, the message may be rejected.
+ * Input: pathid - Path identification number.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
*/
int iucv_reject (u16 pathid, u32 msgid, u32 trgcls);
-/*
- * Name: iucv_reply
- * Purpose: This function responds to the two-way messages that you
- * receive. You must identify completely the message to
- * which you wish to reply. ie, pathid, msgid, and trgcls.
- * Input: pathid - Path identification number.
- * msgid - Specifies the message ID.
- * trgcls - Specifies target class.
+/*
+ * Name: iucv_reply
+ * Purpose: This function responds to the two-way messages that you
+ * receive. You must identify completely the message to
+ * which you wish to reply. ie, pathid, msgid, and trgcls.
+ * Input: pathid - Path identification number.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
* flags1 - Option for path.
- * IPPRTY- 0x20, Specifies if you want to send priority message.
- * buffer - Address of reply buffer.
- * buflen - Length of reply buffer.
- * Output: residual_buffer - Address of buffer updated by the number
- * of bytes you have moved.
+ * IPPRTY- 0x20, Specifies if you want to send priority message.
+ * buffer - Address of reply buffer.
+ * buflen - Length of reply buffer.
+ * Output: residual_buffer - Address of buffer updated by the number
+ * of bytes you have moved.
* residual_length - Contains one of the following values:
* If the answer buffer is the same length as the reply, this field
* contains zero.
* If the answer buffer is longer than the reply, this field contains
- * the number of bytes remaining in the buffer.
+ * the number of bytes remaining in the buffer.
* If the answer buffer is shorter than the reply, this field contains
* a residual count (that is, the number of bytes remianing in the
* reply that does not fit into the buffer. In this
* case b2f0_result = 5.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer address is NULL.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
*/
int iucv_reply (u16 pathid,
u32 msgid,
@@ -561,20 +561,20 @@
void *buffer, ulong buflen, ulong * residual_buffer,
ulong * residual_length);
-/*
- * Name: iucv_reply_array
- * Purpose: This function responds to the two-way messages that you
- * receive. You must identify completely the message to
- * which you wish to reply. ie, pathid, msgid, and trgcls.
- * The array identifies a list of addresses and lengths of
- * discontiguous buffers that contains the reply data.
- * Input: pathid - Path identification number
- * msgid - Specifies the message ID.
- * trgcls - Specifies target class.
+/*
+ * Name: iucv_reply_array
+ * Purpose: This function responds to the two-way messages that you
+ * receive. You must identify completely the message to
+ * which you wish to reply. ie, pathid, msgid, and trgcls.
+ * The array identifies a list of addresses and lengths of
+ * discontiguous buffers that contains the reply data.
+ * Input: pathid - Path identification number
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
* flags1 - Option for path.
* IPPRTY- 0x20, Specifies if you want to send priority message.
- * buffer - Address of array of reply buffers.
- * buflen - Total length of reply buffers.
+ * buffer - Address of array of reply buffers.
+ * buflen - Total length of reply buffers.
* Output: residual_buffer - Address of buffer which IUCV is currently working on.
* residual_length - Contains one of the following values:
* If the answer buffer is the same length as the reply, this field
@@ -585,8 +585,8 @@
* a residual count (that is, the number of bytes remianing in the
* reply that does not fit into the buffer. In this
* case b2f0_result = 5.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer address is NULL.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
*/
int iucv_reply_array (u16 pathid,
u32 msgid,
@@ -596,77 +596,77 @@
ulong buflen, ulong * residual_address,
ulong * residual_length);
-/*
- * Name: iucv_reply_prmmsg
- * Purpose: This function responds to the two-way messages that you
- * receive. You must identify completely the message to
- * which you wish to reply. ie, pathid, msgid, and trgcls.
- * Prmmsg signifies the data is moved into the
- * parameter list.
- * Input: pathid - Path identification number.
- * msgid - Specifies the message ID.
- * trgcls - Specifies target class.
+/*
+ * Name: iucv_reply_prmmsg
+ * Purpose: This function responds to the two-way messages that you
+ * receive. You must identify completely the message to
+ * which you wish to reply. ie, pathid, msgid, and trgcls.
+ * Prmmsg signifies the data is moved into the
+ * parameter list.
+ * Input: pathid - Path identification number.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
* flags1 - Option for path.
* IPPRTY- 0x20 Specifies if you want to send priority message.
- * prmmsg - 8-bytes of data to be placed into the parameter.
- * list.
- * Output: NA
- * Return: Return code from CP IUCV call.
+ * prmmsg - 8-bytes of data to be placed into the parameter.
+ * list.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
*/
int iucv_reply_prmmsg (u16 pathid,
u32 msgid, u32 trgcls, int flags1, uchar prmmsg[8]);
-/*
- * Name: iucv_resume
- * Purpose: This function restores communications over a quiesced path
- * Input: pathid - Path identification number.
- * user_data - 16-bytes of user data.
- * Output: NA
- * Return: Return code from CP IUCV call.
+/*
+ * Name: iucv_resume
+ * Purpose: This function restores communications over a quiesced path
+ * Input: pathid - Path identification number.
+ * user_data - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
*/
int iucv_resume (u16 pathid, uchar user_data[16]);
-/*
- * Name: iucv_send
- * Purpose: This function transmits data to another application.
- * Data to be transmitted is in a buffer and this is a
- * one-way message and the receiver will not reply to the
- * message.
- * Input: pathid - Path identification number.
- * trgcls - Specifies target class.
- * srccls - Specifies the source message class.
- * msgtag - Specifies a tag to be associated with the message.
+/*
+ * Name: iucv_send
+ * Purpose: This function transmits data to another application.
+ * Data to be transmitted is in a buffer and this is a
+ * one-way message and the receiver will not reply to the
+ * message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
* flags1 - Option for path.
* IPPRTY- 0x20 Specifies if you want to send priority message.
- * buffer - Address of send buffer.
- * buflen - Length of send buffer.
- * Output: msgid - Specifies the message ID.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer address is NULL.
+ * buffer - Address of send buffer.
+ * buflen - Length of send buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
*/
int iucv_send (u16 pathid,
u32 * msgid,
u32 trgcls,
u32 srccls, u32 msgtag, int flags1, void *buffer, ulong buflen);
-/*
- * Name: iucv_send_array
- * Purpose: This function transmits data to another application.
- * The contents of buffer is the address of the array of
- * addresses and lengths of discontiguous buffers that hold
- * the message text. This is a one-way message and the
- * receiver will not reply to the message.
- * Input: pathid - Path identification number.
- * trgcls - Specifies target class.
- * srccls - Specifies the source message class.
+/*
+ * Name: iucv_send_array
+ * Purpose: This function transmits data to another application.
+ * The contents of buffer is the address of the array of
+ * addresses and lengths of discontiguous buffers that hold
+ * the message text. This is a one-way message and the
+ * receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
* msgtag - Specifies a tag to be associated witht the message.
* flags1 - Option for path.
- * IPPRTY- specifies if you want to send priority message.
- * buffer - Address of array of send buffers.
- * buflen - Total length of send buffers.
- * Output: msgid - Specifies the message ID.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer address is NULL.
+ * IPPRTY- specifies if you want to send priority message.
+ * buffer - Address of array of send buffers.
+ * buflen - Total length of send buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
*/
int iucv_send_array (u16 pathid,
u32 * msgid,
@@ -675,48 +675,48 @@
u32 msgtag,
int flags1, iucv_array_t * buffer, ulong buflen);
-/*
- * Name: iucv_send_prmmsg
- * Purpose: This function transmits data to another application.
- * Prmmsg specifies that the 8-bytes of data are to be moved
- * into the parameter list. This is a one-way message and the
- * receiver will not reply to the message.
- * Input: pathid - Path identification number.
- * trgcls - Specifies target class.
- * srccls - Specifies the source message class.
- * msgtag - Specifies a tag to be associated with the message.
+/*
+ * Name: iucv_send_prmmsg
+ * Purpose: This function transmits data to another application.
+ * Prmmsg specifies that the 8-bytes of data are to be moved
+ * into the parameter list. This is a one-way message and the
+ * receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
* flags1 - Option for path.
* IPPRTY- 0x20 specifies if you want to send priority message.
- * prmmsg - 8-bytes of data to be placed into parameter list.
- * Output: msgid - Specifies the message ID.
- * Return: Return code from CP IUCV call.
+ * prmmsg - 8-bytes of data to be placed into parameter list.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
*/
int iucv_send_prmmsg (u16 pathid,
u32 * msgid,
u32 trgcls,
u32 srccls, u32 msgtag, int flags1, uchar prmmsg[8]);
-/*
- * Name: iucv_send2way
- * Purpose: This function transmits data to another application.
- * Data to be transmitted is in a buffer. The receiver
- * of the send is expected to reply to the message and
- * a buffer is provided into which IUCV moves the reply
- * to this message.
- * Input: pathid - Path identification number.
- * trgcls - Specifies target class.
- * srccls - Specifies the source message class.
- * msgtag - Specifies a tag associated with the message.
+/*
+ * Name: iucv_send2way
+ * Purpose: This function transmits data to another application.
+ * Data to be transmitted is in a buffer. The receiver
+ * of the send is expected to reply to the message and
+ * a buffer is provided into which IUCV moves the reply
+ * to this message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag associated with the message.
* flags1 - Option for path.
* IPPRTY- 0x20 Specifies if you want to send priority message.
- * buffer - Address of send buffer.
- * buflen - Length of send buffer.
- * ansbuf - Address of buffer into which IUCV moves the reply of
- * this message.
- * anslen - Address of length of buffer.
- * Output: msgid - Specifies the message ID.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer or ansbuf address is NULL.
+ * buffer - Address of send buffer.
+ * buflen - Length of send buffer.
+ * ansbuf - Address of buffer into which IUCV moves the reply of
+ * this message.
+ * anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer or ansbuf address is NULL.
*/
int iucv_send2way (u16 pathid,
u32 * msgid,
@@ -726,28 +726,28 @@
int flags1,
void *buffer, ulong buflen, void *ansbuf, ulong anslen);
-/*
- * Name: iucv_send2way_array
- * Purpose: This function transmits data to another application.
- * The contents of buffer is the address of the array of
- * addresses and lengths of discontiguous buffers that hold
- * the message text. The receiver of the send is expected to
- * reply to the message and a buffer is provided into which
- * IUCV moves the reply to this message.
- * Input: pathid - Path identification number.
- * trgcls - Specifies target class.
- * srccls - Specifies the source message class.
- * msgtag - Specifies a tag to be associated with the message.
+/*
+ * Name: iucv_send2way_array
+ * Purpose: This function transmits data to another application.
+ * The contents of buffer is the address of the array of
+ * addresses and lengths of discontiguous buffers that hold
+ * the message text. The receiver of the send is expected to
+ * reply to the message and a buffer is provided into which
+ * IUCV moves the reply to this message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
* flags1 - Option for path.
* IPPRTY- 0x20 Specifies if you want to send priority message.
- * buffer - Sddress of array of send buffers.
- * buflen - Total length of send buffers.
- * ansbuf - Address of array of buffer into which IUCV moves the reply
- * of this message.
- * anslen - Address of length reply buffers.
- * Output: msgid - Specifies the message ID.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer address is NULL.
+ * buffer - Sddress of array of send buffers.
+ * buflen - Total length of send buffers.
+ * ansbuf - Address of array of buffer into which IUCV moves the reply
+ * of this message.
+ * anslen - Address of length reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
*/
int iucv_send2way_array (u16 pathid,
u32 * msgid,
@@ -758,27 +758,27 @@
iucv_array_t * buffer,
ulong buflen, iucv_array_t * ansbuf, ulong anslen);
-/*
- * Name: iucv_send2way_prmmsg
- * Purpose: This function transmits data to another application.
- * Prmmsg specifies that the 8-bytes of data are to be moved
- * into the parameter list. This is a two-way message and the
- * receiver of the message is expected to reply. A buffer
- * is provided into which IUCV moves the reply to this
- * message.
- * Input: pathid - Rath identification number.
- * trgcls - Specifies target class.
- * srccls - Specifies the source message class.
- * msgtag - Specifies a tag to be associated with the message.
+/*
+ * Name: iucv_send2way_prmmsg
+ * Purpose: This function transmits data to another application.
+ * Prmmsg specifies that the 8-bytes of data are to be moved
+ * into the parameter list. This is a two-way message and the
+ * receiver of the message is expected to reply. A buffer
+ * is provided into which IUCV moves the reply to this
+ * message.
+ * Input: pathid - Rath identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
* flags1 - Option for path.
* IPPRTY- 0x20 Specifies if you want to send priority message.
- * prmmsg - 8-bytes of data to be placed in parameter list.
- * ansbuf - Address of buffer into which IUCV moves the reply of
+ * prmmsg - 8-bytes of data to be placed in parameter list.
+ * ansbuf - Address of buffer into which IUCV moves the reply of
* this message.
- * anslen - Address of length of buffer.
- * Output: msgid - Specifies the message ID.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Buffer address is NULL.
+ * anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
*/
int iucv_send2way_prmmsg (u16 pathid,
u32 * msgid,
@@ -788,29 +788,29 @@
ulong flags1,
uchar prmmsg[8], void *ansbuf, ulong anslen);
-/*
- * Name: iucv_send2way_prmmsg_array
- * Purpose: This function transmits data to another application.
- * Prmmsg specifies that the 8-bytes of data are to be moved
- * into the parameter list. This is a two-way message and the
- * receiver of the message is expected to reply. A buffer
- * is provided into which IUCV moves the reply to this
- * message. The contents of ansbuf is the address of the
- * array of addresses and lengths of discontiguous buffers
- * that contain the reply.
- * Input: pathid - Path identification number.
- * trgcls - Specifies target class.
- * srccls - Specifies the source message class.
- * msgtag - Specifies a tag to be associated with the message.
+/*
+ * Name: iucv_send2way_prmmsg_array
+ * Purpose: This function transmits data to another application.
+ * Prmmsg specifies that the 8-bytes of data are to be moved
+ * into the parameter list. This is a two-way message and the
+ * receiver of the message is expected to reply. A buffer
+ * is provided into which IUCV moves the reply to this
+ * message. The contents of ansbuf is the address of the
+ * array of addresses and lengths of discontiguous buffers
+ * that contain the reply.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
* flags1 - Option for path.
* IPPRTY- 0x20 specifies if you want to send priority message.
- * prmmsg - 8-bytes of data to be placed into the parameter list.
+ * prmmsg - 8-bytes of data to be placed into the parameter list.
* ansbuf - Address of array of buffer into which IUCV moves the reply
- * of this message.
- * anslen - Address of length of reply buffers.
- * Output: msgid - Specifies the message ID.
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Ansbuf address is NULL.
+ * of this message.
+ * anslen - Address of length of reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Ansbuf address is NULL.
*/
int iucv_send2way_prmmsg_array (u16 pathid,
u32 * msgid,
@@ -821,29 +821,29 @@
uchar prmmsg[8],
iucv_array_t * ansbuf, ulong anslen);
-/*
- * Name: iucv_setmask
- * Purpose: This function enables or disables the following IUCV
- * external interruptions: Nonpriority and priority message
- * interrupts, nonpriority and priority reply interrupts.
+/*
+ * Name: iucv_setmask
+ * Purpose: This function enables or disables the following IUCV
+ * external interruptions: Nonpriority and priority message
+ * interrupts, nonpriority and priority reply interrupts.
* Input: SetMaskFlag - options for interrupts
- * 0x80 - Nonpriority_MessagePendingInterruptsFlag
- * 0x40 - Priority_MessagePendingInterruptsFlag
- * 0x20 - Nonpriority_MessageCompletionInterruptsFlag
- * 0x10 - Priority_MessageCompletionInterruptsFlag
+ * 0x80 - Nonpriority_MessagePendingInterruptsFlag
+ * 0x40 - Priority_MessagePendingInterruptsFlag
+ * 0x20 - Nonpriority_MessageCompletionInterruptsFlag
+ * 0x10 - Priority_MessageCompletionInterruptsFlag
* 0x08 - IUCVControlInterruptsFlag
- * Output: NA
- * Return: Return code from CP IUCV call.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
*/
int iucv_setmask (int SetMaskFlag);
-/*
- * Name: iucv_sever
- * Purpose: This function terminates an IUCV path.
- * Input: pathid - Path identification number.
- * user_data - 16-bytes of user data.
- * Output: NA
- * Return: Return code from CP IUCV call.
- * (-EINVAL) - Interal error, wild pointer.
+/*
+ * Name: iucv_sever
+ * Purpose: This function terminates an IUCV path.
+ * Input: pathid - Path identification number.
+ * user_data - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Interal error, wild pointer.
*/
int iucv_sever (u16 pathid, uchar user_data[16]);
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index e65da92..f94419b 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -68,6 +68,7 @@
static void lcs_start_kernel_thread(struct lcs_card *card);
static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+static int lcs_recovery(void *ptr);
/**
* Debug Facility Stuff
@@ -429,12 +430,6 @@
card->tx_buffer = NULL;
card->tx_emitted = 0;
- /* Initialize kernel thread task used for LGW commands. */
- INIT_WORK(&card->kernel_thread_starter,
- (void *)lcs_start_kernel_thread,card);
- card->thread_start_mask = 0;
- card->thread_allowed_mask = 0;
- card->thread_running_mask = 0;
init_waitqueue_head(&card->wait_q);
spin_lock_init(&card->lock);
spin_lock_init(&card->ipm_lock);
@@ -675,8 +670,9 @@
int index, rc;
LCS_DBF_TEXT(5, trace, "rdybuff");
- BUG_ON(buffer->state != BUF_STATE_LOCKED &&
- buffer->state != BUF_STATE_PROCESSED);
+ if (buffer->state != BUF_STATE_LOCKED &&
+ buffer->state != BUF_STATE_PROCESSED)
+ BUG();
spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
buffer->state = BUF_STATE_READY;
index = buffer - channel->iob;
@@ -700,7 +696,8 @@
int index, prev, next;
LCS_DBF_TEXT(5, trace, "prcsbuff");
- BUG_ON(buffer->state != BUF_STATE_READY);
+ if (buffer->state != BUF_STATE_READY)
+ BUG();
buffer->state = BUF_STATE_PROCESSED;
index = buffer - channel->iob;
prev = (index - 1) & (LCS_NUM_BUFFS - 1);
@@ -732,8 +729,9 @@
unsigned long flags;
LCS_DBF_TEXT(5, trace, "relbuff");
- BUG_ON(buffer->state != BUF_STATE_LOCKED &&
- buffer->state != BUF_STATE_PROCESSED);
+ if (buffer->state != BUF_STATE_LOCKED &&
+ buffer->state != BUF_STATE_PROCESSED)
+ BUG();
spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
buffer->state = BUF_STATE_EMPTY;
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
@@ -1147,8 +1145,6 @@
list_add_tail(&ipm->list, &card->ipm_list);
}
spin_unlock_irqrestore(&card->ipm_lock, flags);
- if (card->state == DEV_STATE_UP)
- netif_wake_queue(card->dev);
}
/**
@@ -1231,17 +1227,17 @@
if (ipm != NULL)
continue; /* Address already in list. */
ipm = (struct lcs_ipm_list *)
- kmalloc(sizeof(struct lcs_ipm_list), GFP_ATOMIC);
+ kzalloc(sizeof(struct lcs_ipm_list), GFP_ATOMIC);
if (ipm == NULL) {
PRINT_INFO("Not enough memory to add "
"new multicast entry!\n");
break;
}
- memset(ipm, 0, sizeof(struct lcs_ipm_list));
memcpy(&ipm->ipm.mac_addr, buf, LCS_MAC_LENGTH);
ipm->ipm.ip_addr = im4->multiaddr;
ipm->ipm_state = LCS_IPM_STATE_SET_REQUIRED;
spin_lock_irqsave(&card->ipm_lock, flags);
+ LCS_DBF_HEX(2,trace,&ipm->ipm.ip_addr,4);
list_add(&ipm->list, &card->ipm_list);
spin_unlock_irqrestore(&card->ipm_lock, flags);
}
@@ -1269,7 +1265,15 @@
read_unlock(&in4_dev->mc_list_lock);
in_dev_put(in4_dev);
+ netif_carrier_off(card->dev);
+ netif_tx_disable(card->dev);
+ wait_event(card->write.wait_q,
+ (card->write.state != CH_STATE_RUNNING));
lcs_fix_multicast_list(card);
+ if (card->state == DEV_STATE_UP) {
+ netif_carrier_on(card->dev);
+ netif_wake_queue(card->dev);
+ }
out:
lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
return 0;
@@ -1286,7 +1290,7 @@
LCS_DBF_TEXT(4, trace, "setmulti");
card = (struct lcs_card *) dev->priv;
- if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
+ if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
schedule_work(&card->kernel_thread_starter);
}
@@ -1318,6 +1322,53 @@
return PTR_ERR(irb);
}
+static int
+lcs_get_problem(struct ccw_device *cdev, struct irb *irb)
+{
+ int dstat, cstat;
+ char *sense;
+
+ sense = (char *) irb->ecw;
+ cstat = irb->scsw.cstat;
+ dstat = irb->scsw.dstat;
+
+ if (cstat & (SCHN_STAT_CHN_CTRL_CHK | SCHN_STAT_INTF_CTRL_CHK |
+ SCHN_STAT_CHN_DATA_CHK | SCHN_STAT_CHAIN_CHECK |
+ SCHN_STAT_PROT_CHECK | SCHN_STAT_PROG_CHECK)) {
+ LCS_DBF_TEXT(2, trace, "CGENCHK");
+ return 1;
+ }
+ if (dstat & DEV_STAT_UNIT_CHECK) {
+ if (sense[LCS_SENSE_BYTE_1] &
+ LCS_SENSE_RESETTING_EVENT) {
+ LCS_DBF_TEXT(2, trace, "REVIND");
+ return 1;
+ }
+ if (sense[LCS_SENSE_BYTE_0] &
+ LCS_SENSE_CMD_REJECT) {
+ LCS_DBF_TEXT(2, trace, "CMDREJ");
+ return 0;
+ }
+ if ((!sense[LCS_SENSE_BYTE_0]) &&
+ (!sense[LCS_SENSE_BYTE_1]) &&
+ (!sense[LCS_SENSE_BYTE_2]) &&
+ (!sense[LCS_SENSE_BYTE_3])) {
+ LCS_DBF_TEXT(2, trace, "ZEROSEN");
+ return 0;
+ }
+ LCS_DBF_TEXT(2, trace, "DGENCHK");
+ return 1;
+ }
+ return 0;
+}
+
+void
+lcs_schedule_recovery(struct lcs_card *card)
+{
+ LCS_DBF_TEXT(2, trace, "startrec");
+ if (!lcs_set_thread_start_bit(card, LCS_RECOVERY_THREAD))
+ schedule_work(&card->kernel_thread_starter);
+}
/**
* IRQ Handler for LCS channels
@@ -1327,7 +1378,8 @@
{
struct lcs_card *card;
struct lcs_channel *channel;
- int index;
+ int rc, index;
+ int cstat, dstat;
if (lcs_check_irb_error(cdev, irb))
return;
@@ -1338,14 +1390,27 @@
else
channel = &card->write;
+ cstat = irb->scsw.cstat;
+ dstat = irb->scsw.dstat;
LCS_DBF_TEXT_(5, trace, "Rint%s",cdev->dev.bus_id);
LCS_DBF_TEXT_(5, trace, "%4x%4x",irb->scsw.cstat, irb->scsw.dstat);
LCS_DBF_TEXT_(5, trace, "%4x%4x",irb->scsw.fctl, irb->scsw.actl);
+ /* Check for channel and device errors presented */
+ rc = lcs_get_problem(cdev, irb);
+ if (rc || (dstat & DEV_STAT_UNIT_EXCEP)) {
+ PRINT_WARN("check on device %s, dstat=0x%X, cstat=0x%X \n",
+ cdev->dev.bus_id, dstat, cstat);
+ if (rc) {
+ lcs_schedule_recovery(card);
+ wake_up(&card->wait_q);
+ return;
+ }
+ }
/* How far in the ccw chain have we processed? */
if ((channel->state != CH_STATE_INIT) &&
(irb->scsw.fctl & SCSW_FCTL_START_FUNC)) {
- index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa)
+ index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa)
- channel->ccws;
if ((irb->scsw.actl & SCSW_ACTL_SUSPENDED) ||
(irb->scsw.cstat & SCHN_STAT_PCI))
@@ -1367,7 +1432,6 @@
else if (irb->scsw.actl & SCSW_ACTL_SUSPENDED)
/* CCW execution stopped on a suspend bit. */
channel->state = CH_STATE_SUSPENDED;
-
if (irb->scsw.fctl & SCSW_FCTL_HALT_FUNC) {
if (irb->scsw.cc != 0) {
ccw_device_halt(channel->ccwdev, (addr_t) channel);
@@ -1376,7 +1440,6 @@
/* The channel has been stopped by halt_IO. */
channel->state = CH_STATE_HALTED;
}
-
if (irb->scsw.fctl & SCSW_FCTL_CLEAR_FUNC) {
channel->state = CH_STATE_CLEARED;
}
@@ -1452,7 +1515,7 @@
lcs_release_buffer(channel, buffer);
card = (struct lcs_card *)
((char *) channel - offsetof(struct lcs_card, write));
- if (netif_queue_stopped(card->dev))
+ if (netif_queue_stopped(card->dev) && netif_carrier_ok(card->dev))
netif_wake_queue(card->dev);
spin_lock(&card->lock);
card->tx_emitted--;
@@ -1488,6 +1551,10 @@
card->stats.tx_carrier_errors++;
return 0;
}
+ if (skb->protocol == htons(ETH_P_IPV6)) {
+ dev_kfree_skb(skb);
+ return 0;
+ }
netif_stop_queue(card->dev);
spin_lock(&card->lock);
if (card->tx_buffer != NULL &&
@@ -1633,30 +1700,6 @@
}
/**
- * reset card
- */
-static int
-lcs_resetcard(struct lcs_card *card)
-{
- int retries;
-
- LCS_DBF_TEXT(2, trace, "rescard");
- for (retries = 0; retries < 10; retries++) {
- if (lcs_detect(card) == 0) {
- netif_wake_queue(card->dev);
- card->state = DEV_STATE_UP;
- PRINT_INFO("LCS device %s successfully restarted!\n",
- card->dev->name);
- return 0;
- }
- msleep(3000);
- }
- PRINT_ERR("Error in Reseting LCS card!\n");
- return -EIO;
-}
-
-
-/**
* LCS Stop card
*/
static int
@@ -1680,126 +1723,18 @@
}
/**
- * LGW initiated commands
- */
-static int
-lcs_lgw_startlan_thread(void *data)
-{
- struct lcs_card *card;
-
- card = (struct lcs_card *) data;
- daemonize("lgwstpln");
-
- if (!lcs_do_run_thread(card, LCS_STARTLAN_THREAD))
- return 0;
- LCS_DBF_TEXT(4, trace, "lgwstpln");
- if (card->dev)
- netif_stop_queue(card->dev);
- if (lcs_startlan(card) == 0) {
- netif_wake_queue(card->dev);
- card->state = DEV_STATE_UP;
- PRINT_INFO("LCS Startlan for device %s succeeded!\n",
- card->dev->name);
-
- } else
- PRINT_ERR("LCS Startlan for device %s failed!\n",
- card->dev->name);
- lcs_clear_thread_running_bit(card, LCS_STARTLAN_THREAD);
- return 0;
-}
-
-/**
- * Send startup command initiated by Lan Gateway
- */
-static int
-lcs_lgw_startup_thread(void *data)
-{
- int rc;
-
- struct lcs_card *card;
-
- card = (struct lcs_card *) data;
- daemonize("lgwstaln");
-
- if (!lcs_do_run_thread(card, LCS_STARTUP_THREAD))
- return 0;
- LCS_DBF_TEXT(4, trace, "lgwstaln");
- if (card->dev)
- netif_stop_queue(card->dev);
- rc = lcs_send_startup(card, LCS_INITIATOR_LGW);
- if (rc != 0) {
- PRINT_ERR("Startup for LCS device %s initiated " \
- "by LGW failed!\nReseting card ...\n",
- card->dev->name);
- /* do a card reset */
- rc = lcs_resetcard(card);
- if (rc == 0)
- goto Done;
- }
- rc = lcs_startlan(card);
- if (rc == 0) {
- netif_wake_queue(card->dev);
- card->state = DEV_STATE_UP;
- }
-Done:
- if (rc == 0)
- PRINT_INFO("LCS Startup for device %s succeeded!\n",
- card->dev->name);
- else
- PRINT_ERR("LCS Startup for device %s failed!\n",
- card->dev->name);
- lcs_clear_thread_running_bit(card, LCS_STARTUP_THREAD);
- return 0;
-}
-
-
-/**
- * send stoplan command initiated by Lan Gateway
- */
-static int
-lcs_lgw_stoplan_thread(void *data)
-{
- struct lcs_card *card;
- int rc;
-
- card = (struct lcs_card *) data;
- daemonize("lgwstop");
-
- if (!lcs_do_run_thread(card, LCS_STOPLAN_THREAD))
- return 0;
- LCS_DBF_TEXT(4, trace, "lgwstop");
- if (card->dev)
- netif_stop_queue(card->dev);
- if (lcs_send_stoplan(card, LCS_INITIATOR_LGW) == 0)
- PRINT_INFO("Stoplan for %s initiated by LGW succeeded!\n",
- card->dev->name);
- else
- PRINT_ERR("Stoplan %s initiated by LGW failed!\n",
- card->dev->name);
- /*Try to reset the card, stop it on failure */
- rc = lcs_resetcard(card);
- if (rc != 0)
- rc = lcs_stopcard(card);
- lcs_clear_thread_running_bit(card, LCS_STOPLAN_THREAD);
- return rc;
-}
-
-/**
* Kernel Thread helper functions for LGW initiated commands
*/
static void
lcs_start_kernel_thread(struct lcs_card *card)
{
LCS_DBF_TEXT(5, trace, "krnthrd");
- if (lcs_do_start_thread(card, LCS_STARTUP_THREAD))
- kernel_thread(lcs_lgw_startup_thread, (void *) card, SIGCHLD);
- if (lcs_do_start_thread(card, LCS_STARTLAN_THREAD))
- kernel_thread(lcs_lgw_startlan_thread, (void *) card, SIGCHLD);
- if (lcs_do_start_thread(card, LCS_STOPLAN_THREAD))
- kernel_thread(lcs_lgw_stoplan_thread, (void *) card, SIGCHLD);
+ if (lcs_do_start_thread(card, LCS_RECOVERY_THREAD))
+ kernel_thread(lcs_recovery, (void *) card, SIGCHLD);
#ifdef CONFIG_IP_MULTICAST
if (lcs_do_start_thread(card, LCS_SET_MC_THREAD))
- kernel_thread(lcs_register_mc_addresses, (void *) card, SIGCHLD);
+ kernel_thread(lcs_register_mc_addresses,
+ (void *) card, SIGCHLD);
#endif
}
@@ -1813,19 +1748,14 @@
if (cmd->initiator == LCS_INITIATOR_LGW) {
switch(cmd->cmd_code) {
case LCS_CMD_STARTUP:
- if (!lcs_set_thread_start_bit(card,
- LCS_STARTUP_THREAD))
- schedule_work(&card->kernel_thread_starter);
- break;
case LCS_CMD_STARTLAN:
- if (!lcs_set_thread_start_bit(card,
- LCS_STARTLAN_THREAD))
- schedule_work(&card->kernel_thread_starter);
+ lcs_schedule_recovery(card);
break;
case LCS_CMD_STOPLAN:
- if (!lcs_set_thread_start_bit(card,
- LCS_STOPLAN_THREAD))
- schedule_work(&card->kernel_thread_starter);
+ PRINT_WARN("Stoplan for %s initiated by LGW.\n",
+ card->dev->name);
+ if (card->dev)
+ netif_carrier_off(card->dev);
break;
default:
PRINT_INFO("UNRECOGNIZED LGW COMMAND\n");
@@ -1941,8 +1871,11 @@
LCS_DBF_TEXT(2, trace, "stopdev");
card = (struct lcs_card *) dev->priv;
- netif_stop_queue(dev);
+ netif_carrier_off(dev);
+ netif_tx_disable(dev);
dev->flags &= ~IFF_UP;
+ wait_event(card->write.wait_q,
+ (card->write.state != CH_STATE_RUNNING));
rc = lcs_stopcard(card);
if (rc)
PRINT_ERR("Try it again!\n ");
@@ -1968,6 +1901,7 @@
} else {
dev->flags |= IFF_UP;
+ netif_carrier_on(dev);
netif_wake_queue(dev);
card->state = DEV_STATE_UP;
}
@@ -2059,10 +1993,31 @@
DEVICE_ATTR(lancmd_timeout, 0644, lcs_timeout_show, lcs_timeout_store);
+static ssize_t
+lcs_dev_recover_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct lcs_card *card = dev->driver_data;
+ char *tmp;
+ int i;
+
+ if (!card)
+ return -EINVAL;
+ if (card->state != DEV_STATE_UP)
+ return -EPERM;
+ i = simple_strtoul(buf, &tmp, 16);
+ if (i == 1)
+ lcs_schedule_recovery(card);
+ return count;
+}
+
+static DEVICE_ATTR(recover, 0200, NULL, lcs_dev_recover_store);
+
static struct attribute * lcs_attrs[] = {
&dev_attr_portno.attr,
&dev_attr_type.attr,
&dev_attr_lancmd_timeout.attr,
+ &dev_attr_recover.attr,
NULL,
};
@@ -2099,6 +2054,12 @@
ccwgdev->dev.driver_data = card;
ccwgdev->cdev[0]->handler = lcs_irq;
ccwgdev->cdev[1]->handler = lcs_irq;
+ card->gdev = ccwgdev;
+ INIT_WORK(&card->kernel_thread_starter,
+ (void *) lcs_start_kernel_thread, card);
+ card->thread_start_mask = 0;
+ card->thread_allowed_mask = 0;
+ card->thread_running_mask = 0;
return 0;
}
@@ -2200,6 +2161,7 @@
if (recover_state == DEV_STATE_RECOVER) {
lcs_set_multicast_list(card->dev);
card->dev->flags |= IFF_UP;
+ netif_carrier_on(card->dev);
netif_wake_queue(card->dev);
card->state = DEV_STATE_UP;
} else {
@@ -2229,7 +2191,7 @@
* lcs_shutdown_device, called when setting the group device offline.
*/
static int
-lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
+__lcs_shutdown_device(struct ccwgroup_device *ccwgdev, int recovery_mode)
{
struct lcs_card *card;
enum lcs_dev_states recover_state;
@@ -2239,9 +2201,11 @@
card = (struct lcs_card *)ccwgdev->dev.driver_data;
if (!card)
return -ENODEV;
- lcs_set_allowed_threads(card, 0);
- if (lcs_wait_for_threads(card, LCS_SET_MC_THREAD))
- return -ERESTARTSYS;
+ if (recovery_mode == 0) {
+ lcs_set_allowed_threads(card, 0);
+ if (lcs_wait_for_threads(card, LCS_SET_MC_THREAD))
+ return -ERESTARTSYS;
+ }
LCS_DBF_HEX(3, setup, &card, sizeof(void*));
recover_state = card->state;
@@ -2256,6 +2220,43 @@
return 0;
}
+static int
+lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
+{
+ return __lcs_shutdown_device(ccwgdev, 0);
+}
+
+/**
+ * drive lcs recovery after startup and startlan initiated by Lan Gateway
+ */
+static int
+lcs_recovery(void *ptr)
+{
+ struct lcs_card *card;
+ struct ccwgroup_device *gdev;
+ int rc;
+
+ card = (struct lcs_card *) ptr;
+ daemonize("lcs_recover");
+
+ LCS_DBF_TEXT(4, trace, "recover1");
+ if (!lcs_do_run_thread(card, LCS_RECOVERY_THREAD))
+ return 0;
+ LCS_DBF_TEXT(4, trace, "recover2");
+ gdev = card->gdev;
+ PRINT_WARN("Recovery of device %s started...\n", gdev->dev.bus_id);
+ rc = __lcs_shutdown_device(gdev, 1);
+ rc = lcs_new_device(gdev);
+ if (!rc)
+ PRINT_INFO("Device %s successfully recovered!\n",
+ card->dev->name);
+ else
+ PRINT_INFO("Device %s could not be recovered!\n",
+ card->dev->name);
+ lcs_clear_thread_running_bit(card, LCS_RECOVERY_THREAD);
+ return 0;
+}
+
/**
* lcs_remove_device, free buffers and card
*/
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index 2fad5e4..9314393 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -73,13 +73,17 @@
/**
* LCS sense byte definitions
*/
+#define LCS_SENSE_BYTE_0 0
+#define LCS_SENSE_BYTE_1 1
+#define LCS_SENSE_BYTE_2 2
+#define LCS_SENSE_BYTE_3 3
#define LCS_SENSE_INTERFACE_DISCONNECT 0x01
#define LCS_SENSE_EQUIPMENT_CHECK 0x10
#define LCS_SENSE_BUS_OUT_CHECK 0x20
#define LCS_SENSE_INTERVENTION_REQUIRED 0x40
#define LCS_SENSE_CMD_REJECT 0x80
-#define LCS_SENSE_RESETTING_EVENT 0x0080
-#define LCS_SENSE_DEVICE_ONLINE 0x0020
+#define LCS_SENSE_RESETTING_EVENT 0x80
+#define LCS_SENSE_DEVICE_ONLINE 0x20
/**
* LCS packet type definitions
@@ -152,10 +156,9 @@
enum lcs_threads {
LCS_SET_MC_THREAD = 1,
- LCS_STARTLAN_THREAD = 2,
- LCS_STOPLAN_THREAD = 4,
- LCS_STARTUP_THREAD = 8,
+ LCS_RECOVERY_THREAD = 2,
};
+
/**
* LCS struct declarations
*/
@@ -286,6 +289,7 @@
struct net_device_stats stats;
unsigned short (*lan_type_trans)(struct sk_buff *skb,
struct net_device *dev);
+ struct ccwgroup_device *gdev;
struct lcs_channel read;
struct lcs_channel write;
struct lcs_buffer *tx_buffer;
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 260a93c..b452cc1 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -30,7 +30,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
-
+
#undef DEBUG
#include <linux/module.h>
@@ -65,7 +65,7 @@
("(C) 2001 IBM Corporation by Fritz Elfert (felfert@millenux.com)");
MODULE_DESCRIPTION ("Linux for S/390 IUCV network driver");
-
+
#define PRINTK_HEADER " iucv: " /* for debugging */
static struct device_driver netiucv_driver = {
@@ -202,7 +202,7 @@
*p = '\0';
return tmp;
}
-
+
/**
* States of the interface statemachine.
*/
@@ -244,7 +244,7 @@
"Connection up",
"Connection down",
};
-
+
/**
* Events of the connection statemachine
*/
@@ -364,7 +364,7 @@
"Connect error",
};
-
+
/**
* Debug Facility Stuff
*/
@@ -516,7 +516,7 @@
fsm_action_nop(fsm_instance *fi, int event, void *arg)
{
}
-
+
/**
* Actions of the connection statemachine
*****************************************************************************/
@@ -993,7 +993,7 @@
static const int CONN_FSM_LEN = sizeof(conn_fsm) / sizeof(fsm_node);
-
+
/**
* Actions for interface - statemachine.
*****************************************************************************/
@@ -1182,7 +1182,7 @@
fsm_newstate(conn->fsm, CONN_STATE_TX);
conn->prof.send_stamp = xtime;
-
+
rc = iucv_send(conn->pathid, NULL, 0, 0, 1 /* single_flag */,
0, nskb->data, nskb->len);
/* Shut up, gcc! nskb is always below 2G. */
@@ -1220,7 +1220,7 @@
return rc;
}
-
+
/**
* Interface API for upper network layers
*****************************************************************************/
@@ -1291,7 +1291,7 @@
/**
* If connection is not running, try to restart it
- * and throw away packet.
+ * and throw away packet.
*/
if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) {
fsm_event(privptr->fsm, DEV_EVENT_START, dev);
@@ -1538,7 +1538,7 @@
maxcq_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct netiucv_priv *priv = dev->driver_data;
-
+
IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
priv->conn->prof.maxcqueue = 0;
return count;
@@ -1559,7 +1559,7 @@
sdoio_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct netiucv_priv *priv = dev->driver_data;
-
+
IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
priv->conn->prof.doios_single = 0;
return count;
@@ -1580,7 +1580,7 @@
mdoio_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct netiucv_priv *priv = dev->driver_data;
-
+
IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
priv->conn->prof.doios_multi = 0;
return count;
@@ -1601,7 +1601,7 @@
txlen_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct netiucv_priv *priv = dev->driver_data;
-
+
IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
priv->conn->prof.txlen = 0;
return count;
@@ -1622,7 +1622,7 @@
txtime_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct netiucv_priv *priv = dev->driver_data;
-
+
IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
priv->conn->prof.tx_time = 0;
return count;
@@ -2000,7 +2000,7 @@
}
PRINT_INFO("%s: '%s'\n", dev->name, netiucv_printname(username));
-
+
return count;
out_free_ndev:
@@ -2099,7 +2099,7 @@
netiucv_init(void)
{
int ret;
-
+
ret = iucv_register_dbf_views();
if (ret) {
PRINT_WARN("netiucv_init failed, "
@@ -2128,7 +2128,7 @@
}
return ret;
}
-
+
module_init(netiucv_init);
module_exit(netiucv_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h
index 4df0fcd..619f4a0 100644
--- a/drivers/s390/net/qeth.h
+++ b/drivers/s390/net/qeth.h
@@ -376,7 +376,7 @@
__u8 reserved3[18];
__u32 ccid;
} __attribute__ ((packed));
-
+
struct qeth_hdr {
union {
struct qeth_hdr_layer2 l2;
@@ -825,7 +825,7 @@
int use_hard_stop;
int (*orig_hard_header)(struct sk_buff *,struct net_device *,
unsigned short,void *,void *,unsigned);
- struct qeth_osn_info osn_info;
+ struct qeth_osn_info osn_info;
};
struct qeth_card_list_struct {
@@ -944,7 +944,7 @@
return 0;
switch (card->info.type) {
case QETH_CARD_TYPE_IQD:
- case QETH_CARD_TYPE_OSN:
+ case QETH_CARD_TYPE_OSN:
return IFF_NOARP;
#ifdef CONFIG_QETH_IPV6
default:
@@ -981,7 +981,7 @@
qeth_get_max_mtu_for_card(int cardtype)
{
switch (cardtype) {
-
+
case QETH_CARD_TYPE_UNKNOWN:
case QETH_CARD_TYPE_OSAE:
case QETH_CARD_TYPE_OSN:
@@ -1097,9 +1097,9 @@
int count = 0, rc = 0;
int in[4];
- rc = sscanf(buf, "%d.%d.%d.%d%n",
+ rc = sscanf(buf, "%d.%d.%d.%d%n",
&in[0], &in[1], &in[2], &in[3], &count);
- if (rc != 4 || count)
+ if (rc != 4 || count<=0)
return -EINVAL;
for (count = 0; count < 4; count++) {
if (in[count] > 255)
@@ -1131,7 +1131,7 @@
cnt = out = found = save_cnt = num2 = 0;
end = start = (char *) buf;
- in = (__u16 *) addr;
+ in = (__u16 *) addr;
memset(in, 0, 16);
while (end) {
end = strchr(end,':');
@@ -1139,7 +1139,7 @@
end = (char *)buf + (strlen(buf));
out = 1;
}
- if ((end - start)) {
+ if ((end - start)) {
memset(num, 0, 5);
memcpy(num, start, end - start);
if (!qeth_isxdigit(num))
@@ -1241,5 +1241,5 @@
extern void
qeth_osn_deregister(struct net_device *);
-
+
#endif /* __QETH_H__ */
diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c
index 44e226f..0bab60a 100644
--- a/drivers/s390/net/qeth_eddp.c
+++ b/drivers/s390/net/qeth_eddp.c
@@ -81,7 +81,7 @@
qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *buf)
{
struct qeth_eddp_context_reference *ref;
-
+
QETH_DBF_TEXT(trace, 6, "eddprctx");
while (!list_empty(&buf->ctx_list)){
ref = list_entry(buf->ctx_list.next,
@@ -135,7 +135,7 @@
"buffer!\n");
goto out;
}
- }
+ }
/* check if the whole next skb fits into current buffer */
if ((QETH_MAX_BUFFER_ELEMENTS(queue->card) -
buf->next_element_to_fill)
@@ -148,7 +148,7 @@
* and increment ctx's refcnt */
must_refcnt = 1;
continue;
- }
+ }
if (must_refcnt){
must_refcnt = 0;
if (qeth_eddp_buf_ref_context(buf, ctx)){
@@ -266,7 +266,7 @@
int left_in_frag;
int copy_len;
u8 *src;
-
+
QETH_DBF_TEXT(trace, 5, "eddpcdtc");
if (skb_shinfo(eddp->skb)->nr_frags == 0) {
memcpy(dst, eddp->skb->data + eddp->skb_offset, len);
@@ -408,7 +408,7 @@
struct tcphdr *tcph;
int data_len;
u32 hcsum;
-
+
QETH_DBF_TEXT(trace, 5, "eddpftcp");
eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl;
if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) {
@@ -465,13 +465,13 @@
eddp->th.tcp.h.seq += data_len;
}
}
-
+
static inline int
qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
struct sk_buff *skb, struct qeth_hdr *qhdr)
{
struct qeth_eddp_data *eddp = NULL;
-
+
QETH_DBF_TEXT(trace, 5, "eddpficx");
/* create our segmentation headers and copy original headers */
if (skb->protocol == ETH_P_IP)
@@ -512,7 +512,7 @@
int hdr_len)
{
int skbs_per_page;
-
+
QETH_DBF_TEXT(trace, 5, "eddpcanp");
/* can we put multiple skbs in one page? */
skbs_per_page = PAGE_SIZE / (skb_shinfo(skb)->tso_size + hdr_len);
@@ -588,7 +588,7 @@
struct qeth_hdr *qhdr)
{
struct qeth_eddp_context *ctx = NULL;
-
+
QETH_DBF_TEXT(trace, 5, "creddpct");
if (skb->protocol == ETH_P_IP)
ctx = qeth_eddp_create_context_generic(card, skb,
diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h
index e422b41..61faf05 100644
--- a/drivers/s390/net/qeth_fs.h
+++ b/drivers/s390/net/qeth_fs.h
@@ -42,7 +42,7 @@
extern void
qeth_remove_device_attributes_osn(struct device *dev);
-
+
extern int
qeth_create_driver_attributes(void);
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index cb14642..9e671a4 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -513,7 +513,7 @@
QETH_DBF_TEXT(setup, 3, "setoffl");
QETH_DBF_HEX(setup, 3, &card, sizeof(void *));
-
+
if (card->dev && netif_carrier_ok(card->dev))
netif_carrier_off(card->dev);
recover_flag = card->state;
@@ -604,13 +604,13 @@
list_for_each_entry(addr, &card->ip_list, entry) {
if (card->options.layer2) {
if ((addr->type == todo->type) &&
- (memcmp(&addr->mac, &todo->mac,
+ (memcmp(&addr->mac, &todo->mac,
OSA_ADDR_LEN) == 0)) {
found = 1;
break;
}
continue;
- }
+ }
if ((addr->proto == QETH_PROT_IPV4) &&
(todo->proto == QETH_PROT_IPV4) &&
(addr->type == todo->type) &&
@@ -694,13 +694,13 @@
if (card->options.layer2) {
if ((tmp->type == addr->type) &&
(tmp->is_multicast == addr->is_multicast) &&
- (memcmp(&tmp->mac, &addr->mac,
+ (memcmp(&tmp->mac, &addr->mac,
OSA_ADDR_LEN) == 0)) {
found = 1;
break;
}
continue;
- }
+ }
if ((tmp->proto == QETH_PROT_IPV4) &&
(addr->proto == QETH_PROT_IPV4) &&
(tmp->type == addr->type) &&
@@ -1173,7 +1173,7 @@
"due to hardware limitations!\n");
card->qdio.no_out_queues = 1;
card->qdio.default_out_queue = 0;
- }
+ }
return 0;
}
i++;
@@ -1198,7 +1198,7 @@
return -ENODEV;
QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id);
-
+
card = qeth_alloc_card();
if (!card) {
put_device(dev);
@@ -1220,7 +1220,7 @@
put_device(dev);
qeth_free_card(card);
return rc;
- }
+ }
if ((rc = qeth_setup_card(card))){
QETH_DBF_TEXT_(setup, 2, "2err%d", rc);
put_device(dev);
@@ -1843,7 +1843,7 @@
&card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH);
QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN);
}
-
+
static int
qeth_send_control_data(struct qeth_card *card, int len,
struct qeth_cmd_buffer *iob,
@@ -1937,7 +1937,7 @@
wake_up(&card->wait_q);
}
return rc;
-}
+}
static inline void
qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
@@ -1966,7 +1966,7 @@
memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2);
return qeth_osn_send_control_data(card, s1, iob);
}
-
+
static int
qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
int (*reply_cb)
@@ -2579,7 +2579,7 @@
skb->dev = card->dev;
if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2)
vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr);
- else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)
+ else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)
qeth_rebuild_skb(card, skb, hdr);
else { /*in case of OSN*/
skb_push(skb, sizeof(struct qeth_hdr));
@@ -2763,7 +2763,7 @@
index = i % QDIO_MAX_BUFFERS_PER_Q;
buffer = &card->qdio.in_q->bufs[index];
if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) &&
- qeth_check_qdio_errors(buffer->buffer,
+ qeth_check_qdio_errors(buffer->buffer,
qdio_err, siga_err,"qinerr")))
qeth_process_inbound_buffer(card, buffer, index);
/* clear buffer and give back to hardware */
@@ -3187,7 +3187,7 @@
if (card->qdio.state == QETH_QDIO_ALLOCATED)
return 0;
- card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q),
+ card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q),
GFP_KERNEL|GFP_DMA);
if (!card->qdio.in_q)
return - ENOMEM;
@@ -3476,7 +3476,7 @@
rc3 = qeth_halt_channel(&card->data);
if (rc1)
return rc1;
- if (rc2)
+ if (rc2)
return rc2;
return rc3;
}
@@ -3491,7 +3491,7 @@
rc3 = qeth_clear_channel(&card->data);
if (rc1)
return rc1;
- if (rc2)
+ if (rc2)
return rc2;
return rc3;
}
@@ -3798,10 +3798,10 @@
QETH_DBF_TEXT(trace,4,"nomacadr");
return -EPERM;
}
- card->dev->flags |= IFF_UP;
- netif_start_queue(dev);
card->data.state = CH_STATE_UP;
card->state = CARD_STATE_UP;
+ card->dev->flags |= IFF_UP;
+ netif_start_queue(dev);
if (!card->lan_online && netif_carrier_ok(dev))
netif_carrier_off(dev);
@@ -3817,7 +3817,7 @@
card = (struct qeth_card *) dev->priv;
- netif_stop_queue(dev);
+ netif_tx_disable(dev);
card->dev->flags &= ~IFF_UP;
if (card->state == CARD_STATE_UP)
card->state = CARD_STATE_SOFTSETUP;
@@ -3958,7 +3958,7 @@
#endif
*hdr = (struct qeth_hdr *)
qeth_push_skb(card, skb, sizeof(struct qeth_hdr));
- if (hdr == NULL)
+ if (*hdr == NULL)
return -EINVAL;
return 0;
}
@@ -4098,7 +4098,7 @@
}
} else { /* passthrough */
if((skb->dev->type == ARPHRD_IEEE802_TR) &&
- !memcmp(skb->data + sizeof(struct qeth_hdr) +
+ !memcmp(skb->data + sizeof(struct qeth_hdr) +
sizeof(__u16), skb->dev->broadcast, 6)) {
hdr->hdr.l3.flags = QETH_CAST_BROADCAST |
QETH_HDR_PASSTHRU;
@@ -4385,7 +4385,7 @@
}
static inline int
-qeth_get_elements_no(struct qeth_card *card, void *hdr,
+qeth_get_elements_no(struct qeth_card *card, void *hdr,
struct sk_buff *skb, int elems)
{
int elements_needed = 0;
@@ -4416,6 +4416,8 @@
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
int tx_bytes = skb->len;
+ unsigned short nr_frags = skb_shinfo(skb)->nr_frags;
+ unsigned short tso_size = skb_shinfo(skb)->tso_size;
int rc;
QETH_DBF_TEXT(trace, 6, "sendpkt");
@@ -4441,7 +4443,7 @@
return 0;
}
cast_type = qeth_get_cast_type(card, skb);
- if ((cast_type == RTN_BROADCAST) &&
+ if ((cast_type == RTN_BROADCAST) &&
(card->info.broadcast_capable == 0)){
card->stats.tx_dropped++;
card->stats.tx_errors++;
@@ -4463,7 +4465,7 @@
card->stats.tx_errors++;
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
- }
+ }
elements_needed++;
} else {
if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))) {
@@ -4498,16 +4500,16 @@
card->stats.tx_packets++;
card->stats.tx_bytes += tx_bytes;
#ifdef CONFIG_QETH_PERF_STATS
- if (skb_shinfo(skb)->tso_size &&
+ if (tso_size &&
!(large_send == QETH_LARGE_SEND_NO)) {
- card->perf_stats.large_send_bytes += skb->len;
+ card->perf_stats.large_send_bytes += tx_bytes;
card->perf_stats.large_send_cnt++;
}
- if (skb_shinfo(skb)->nr_frags > 0){
+ if (nr_frags > 0){
card->perf_stats.sg_skbs_sent++;
/* nr_frags + skb->data */
card->perf_stats.sg_frags_sent +=
- skb_shinfo(skb)->nr_frags + 1;
+ nr_frags + 1;
}
#endif /* CONFIG_QETH_PERF_STATS */
}
@@ -5373,7 +5375,7 @@
cmd = (struct qeth_ipa_cmd *) data;
if (cmd->hdr.return_code) {
PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. "
- "Continuing\n",cmd->data.setdelvlan.vlan_id,
+ "Continuing\n",cmd->data.setdelvlan.vlan_id,
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
QETH_DBF_TEXT_(trace, 2, "L2VL%4x", cmd->hdr.command);
QETH_DBF_TEXT_(trace, 2, "L2%s", CARD_BUS_ID(card));
@@ -5393,7 +5395,7 @@
iob = qeth_get_ipacmd_buffer(card, ipacmd, QETH_PROT_IPV4);
cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
cmd->data.setdelvlan.vlan_id = i;
- return qeth_send_ipa_cmd(card, iob,
+ return qeth_send_ipa_cmd(card, iob,
qeth_layer2_send_setdelvlan_cb, NULL);
}
@@ -5457,7 +5459,7 @@
* Examine hardware response to SET_PROMISC_MODE
*/
static int
-qeth_setadp_promisc_mode_cb(struct qeth_card *card,
+qeth_setadp_promisc_mode_cb(struct qeth_card *card,
struct qeth_reply *reply,
unsigned long data)
{
@@ -5468,10 +5470,10 @@
cmd = (struct qeth_ipa_cmd *) data;
setparms = &(cmd->data.setadapterparms);
-
+
qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd);
- if (cmd->hdr.return_code) {
- QETH_DBF_TEXT_(trace,4,"prmrc%2.2x",cmd->hdr.return_code);
+ if (cmd->hdr.return_code) {
+ QETH_DBF_TEXT_(trace,4,"prmrc%2.2x",cmd->hdr.return_code);
setparms->data.mode = SET_PROMISC_MODE_OFF;
}
card->info.promisc_mode = setparms->data.mode;
@@ -5517,7 +5519,7 @@
if (card->info.type == QETH_CARD_TYPE_OSN)
return ;
-
+
QETH_DBF_TEXT(trace, 3, "setmulti");
qeth_delete_mc_addresses(card);
if (card->options.layer2) {
@@ -5575,7 +5577,7 @@
struct qeth_cmd_buffer *iob;
struct qeth_card *card;
int rc;
-
+
QETH_DBF_TEXT(trace, 2, "osnsdmc");
if (!dev)
return -ENODEV;
@@ -5654,7 +5656,7 @@
card->osn_info.data_cb = NULL;
return;
}
-
+
static void
qeth_delete_mc_addresses(struct qeth_card *card)
{
@@ -5818,7 +5820,7 @@
struct inet6_dev *in6_dev;
QETH_DBF_TEXT(trace,4,"chkmcv6");
- if (!qeth_is_supported(card, IPA_IPV6))
+ if (!qeth_is_supported(card, IPA_IPV6))
return ;
in6_dev = in6_dev_get(card->dev);
if (in6_dev == NULL)
@@ -6359,12 +6361,9 @@
dev->vlan_rx_kill_vid = qeth_vlan_rx_kill_vid;
dev->vlan_rx_add_vid = qeth_vlan_rx_add_vid;
#endif
- dev->hard_header = card->orig_hard_header;
if (qeth_get_netdev_flags(card) & IFF_NOARP) {
dev->rebuild_header = NULL;
dev->hard_header = NULL;
- if (card->options.fake_ll)
- dev->hard_header = qeth_fake_header;
dev->header_cache_update = NULL;
dev->hard_header_cache = NULL;
}
@@ -6373,6 +6372,9 @@
if (!(card->info.unique_id & UNIQUE_ID_NOT_BY_CARD))
card->dev->dev_id = card->info.unique_id & 0xffff;
#endif
+ if (card->options.fake_ll &&
+ (qeth_get_netdev_flags(card) & IFF_NOARP))
+ dev->hard_header = qeth_fake_header;
dev->hard_header_parse = NULL;
dev->set_mac_address = qeth_layer2_set_mac_address;
dev->flags |= qeth_get_netdev_flags(card);
@@ -6477,6 +6479,9 @@
/*network device will be recovered*/
if (card->dev) {
card->dev->hard_header = card->orig_hard_header;
+ if (card->options.fake_ll &&
+ (qeth_get_netdev_flags(card) & IFF_NOARP))
+ card->dev->hard_header = qeth_fake_header;
return 0;
}
/* at first set_online allocate netdev */
@@ -6584,7 +6589,7 @@
cmd = (struct qeth_ipa_cmd *) data;
if (!card->options.layer2 || card->info.guestlan ||
- !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) {
+ !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) {
memcpy(card->dev->dev_addr,
&cmd->data.setadapterparms.data.change_addr.addr,
OSA_ADDR_LEN);
@@ -7031,14 +7036,12 @@
QETH_DBF_TEXT(trace,3,"softipv6");
- netif_stop_queue(card->dev);
rc = qeth_send_startlan(card, QETH_PROT_IPV6);
if (rc) {
PRINT_ERR("IPv6 startlan failed on %s\n",
QETH_CARD_IFNAME(card));
return rc;
}
- netif_wake_queue(card->dev);
rc = qeth_query_ipassists(card,QETH_PROT_IPV6);
if (rc) {
PRINT_ERR("IPv6 query ipassist failed on %s\n",
@@ -7352,7 +7355,8 @@
card->options.large_send = type;
return 0;
}
- netif_stop_queue(card->dev);
+ if (card->state == CARD_STATE_UP)
+ netif_tx_disable(card->dev);
card->options.large_send = type;
switch (card->options.large_send) {
case QETH_LARGE_SEND_EDDP:
@@ -7374,7 +7378,8 @@
card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
break;
}
- netif_wake_queue(card->dev);
+ if (card->state == CARD_STATE_UP)
+ netif_wake_queue(card->dev);
return rc;
}
@@ -7427,7 +7432,7 @@
if ((rc = qeth_setrouting_v6(card)))
QETH_DBF_TEXT_(setup, 2, "5err%d", rc);
out:
- netif_stop_queue(card->dev);
+ netif_tx_disable(card->dev);
return 0;
}
@@ -7567,7 +7572,7 @@
if (card->read.state == CH_STATE_UP &&
card->write.state == CH_STATE_UP &&
(card->state == CARD_STATE_UP)) {
- if (recovery_mode &&
+ if (recovery_mode &&
card->info.type != QETH_CARD_TYPE_OSN) {
qeth_stop(card->dev);
} else {
@@ -7736,10 +7741,8 @@
qeth_register_netdev(struct qeth_card *card)
{
QETH_DBF_TEXT(setup, 3, "regnetd");
- if (card->dev->reg_state != NETREG_UNINITIALIZED) {
- qeth_netdev_init(card->dev);
+ if (card->dev->reg_state != NETREG_UNINITIALIZED)
return 0;
- }
/* sysfs magic */
SET_NETDEV_DEV(card->dev, &card->gdev->dev);
return register_netdev(card->dev);
@@ -7750,7 +7753,7 @@
{
QETH_DBF_TEXT(setup ,2, "startag");
- if (recovery_mode &&
+ if (recovery_mode &&
card->info.type != QETH_CARD_TYPE_OSN) {
qeth_open(card->dev);
} else {
diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h
index 011c410..0477c47 100644
--- a/drivers/s390/net/qeth_mpc.h
+++ b/drivers/s390/net/qeth_mpc.h
@@ -445,7 +445,7 @@
/* Helper functions */
#define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \
(cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY))
-
+
/*****************************************************************************/
/* END OF IP Assist related definitions */
/*****************************************************************************/
@@ -490,7 +490,7 @@
/* Layer 2 defintions */
#define QETH_PROT_LAYER2 0x08
#define QETH_PROT_TCPIP 0x03
-#define QETH_PROT_OSN2 0x0a
+#define QETH_PROT_OSN2 0x0a
#define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer+0x50)
#define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer+0x19)
diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c
index 360d782..66f2da1 100644
--- a/drivers/s390/net/qeth_proc.c
+++ b/drivers/s390/net/qeth_proc.c
@@ -36,7 +36,7 @@
{
struct device *dev = NULL;
loff_t nr = 0;
-
+
down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
if (*offset == 0)
return SEQ_START_TOKEN;
@@ -60,8 +60,8 @@
qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
{
struct device *prev, *next;
-
- if (it == SEQ_START_TOKEN)
+
+ if (it == SEQ_START_TOKEN)
prev = NULL;
else
prev = (struct device *) it;
@@ -180,7 +180,7 @@
struct device *device;
struct qeth_card *card;
-
+
if (it == SEQ_START_TOKEN)
return 0;
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index 882d419..185a9cf 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -785,7 +785,7 @@
}
if (card->options.large_send == type)
return count;
- if ((rc = qeth_set_large_send(card, type)))
+ if ((rc = qeth_set_large_send(card, type)))
return rc;
return count;
}
@@ -1682,7 +1682,7 @@
if (card->info.type == QETH_CARD_TYPE_OSN)
return sysfs_create_group(&dev->kobj,
&qeth_osn_device_attr_group);
-
+
if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group)))
return ret;
if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group))){
@@ -1713,7 +1713,7 @@
if (card->info.type == QETH_CARD_TYPE_OSN)
return sysfs_remove_group(&dev->kobj,
&qeth_osn_device_attr_group);
-
+
sysfs_remove_group(&dev->kobj, &qeth_device_attr_group);
sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group);
sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group);
diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h
index 1286dde..24ef40c 100644
--- a/drivers/s390/net/qeth_tso.h
+++ b/drivers/s390/net/qeth_tso.h
@@ -117,11 +117,11 @@
int fragno;
unsigned long addr;
int element, cnt, dlen;
-
+
fragno = skb_shinfo(skb)->nr_frags;
element = *next_element_to_fill;
dlen = 0;
-
+
if (is_tso)
buffer->element[element].flags =
SBAL_FLAGS_MIDDLE_FRAG;
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index bd14720..b046ffa 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -864,6 +864,9 @@
/**
* ata_port_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
+ * @fn: workqueue function to be scheduled
+ * @data: data value to pass to workqueue function
+ * @delay: delay time for workqueue function
*
* Schedule @fn(@data) for execution after @delay jiffies using
* port_task. There is one port_task per port and it's the
@@ -2739,6 +2742,8 @@
* ata_dev_init_params - Issue INIT DEV PARAMS command
* @ap: Port associated with device @dev
* @dev: Device to which command will be sent
+ * @heads: Number of heads (taskfile parameter)
+ * @sectors: Number of sectors (taskfile parameter)
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -3638,6 +3643,8 @@
ata_pio_sector(qc);
}
+
+ ata_altstatus(ap); /* flush */
}
static void ata_pio_error(struct ata_port *ap)
@@ -3754,11 +3761,14 @@
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->flags &= ~ATA_FLAG_NOINTR;
ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+ ata_altstatus(ap); /* flush */
+
if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
ap->ops->bmdma_start(qc); /* initiate bmdma */
spin_unlock_irqrestore(&ap->host_set->lock, flags);
} else {
ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+ ata_altstatus(ap); /* flush */
/* PIO commands are handled by polling */
ap->hsm_task_state = HSM_ST;
@@ -4287,6 +4297,7 @@
int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
{
if (ap->flags & ATA_FLAG_SUSPENDED) {
+ ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000);
ap->flags &= ~ATA_FLAG_SUSPENDED;
ata_set_mode(ap);
}
@@ -4302,6 +4313,7 @@
* ata_device_suspend - prepare a device for suspend
* @ap: port the device is connected to
* @dev: the device to suspend
+ * @state: target power management state
*
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index d5fdcb9..9b8bca1 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.6"
+#define DRV_VERSION "0.7"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -50,6 +50,12 @@
MV_PCI_REG_BASE = 0,
MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */
+ MV_IRQ_COAL_CAUSE = (MV_IRQ_COAL_REG_BASE + 0x08),
+ MV_IRQ_COAL_CAUSE_LO = (MV_IRQ_COAL_REG_BASE + 0x88),
+ MV_IRQ_COAL_CAUSE_HI = (MV_IRQ_COAL_REG_BASE + 0x8c),
+ MV_IRQ_COAL_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xcc),
+ MV_IRQ_COAL_TIME_THRESHOLD = (MV_IRQ_COAL_REG_BASE + 0xd0),
+
MV_SATAHC0_REG_BASE = 0x20000,
MV_FLASH_CTL = 0x1046c,
MV_GPIO_PORT_CTL = 0x104f0,
@@ -302,9 +308,6 @@
dma_addr_t crpb_dma;
struct mv_sg *sg_tbl;
dma_addr_t sg_tbl_dma;
-
- unsigned req_producer; /* cp of req_in_ptr */
- unsigned rsp_consumer; /* cp of rsp_out_ptr */
u32 pp_flags;
};
@@ -937,8 +940,6 @@
writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
- pp->req_producer = pp->rsp_consumer = 0;
-
/* Don't turn on EDMA here...do it before DMA commands only. Else
* we'll be unable to send non-data, PIO, etc due to restricted access
* to shadow regs.
@@ -1022,16 +1023,16 @@
}
}
-static inline unsigned mv_inc_q_index(unsigned *index)
+static inline unsigned mv_inc_q_index(unsigned index)
{
- *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
- return *index;
+ return (index + 1) & MV_MAX_Q_DEPTH_MASK;
}
static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
{
- *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+ u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
(last ? CRQB_CMD_LAST : 0);
+ *cmdw = cpu_to_le16(tmp);
}
/**
@@ -1053,15 +1054,11 @@
u16 *cw;
struct ata_taskfile *tf;
u16 flags = 0;
+ unsigned in_index;
if (ATA_PROT_DMA != qc->tf.protocol)
return;
- /* the req producer index should be the same as we remember it */
- WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->req_producer);
-
/* Fill in command request block
*/
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1069,13 +1066,17 @@
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- pp->crqb[pp->req_producer].sg_addr =
- cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
- pp->crqb[pp->req_producer].sg_addr_hi =
- cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
- pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+ /* get current queue index from hardware */
+ in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
- cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+ pp->crqb[in_index].sg_addr =
+ cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ pp->crqb[in_index].sg_addr_hi =
+ cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
+
+ cw = &pp->crqb[in_index].ata_cmd[0];
tf = &qc->tf;
/* Sadly, the CRQB cannot accomodate all registers--there are
@@ -1144,16 +1145,12 @@
struct mv_port_priv *pp = ap->private_data;
struct mv_crqb_iie *crqb;
struct ata_taskfile *tf;
+ unsigned in_index;
u32 flags = 0;
if (ATA_PROT_DMA != qc->tf.protocol)
return;
- /* the req producer index should be the same as we remember it */
- WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->req_producer);
-
/* Fill in Gen IIE command request block
*/
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1162,7 +1159,11 @@
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
- crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+ /* get current queue index from hardware */
+ in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+ crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
@@ -1210,6 +1211,7 @@
{
void __iomem *port_mmio = mv_ap_base(qc->ap);
struct mv_port_priv *pp = qc->ap->private_data;
+ unsigned in_index;
u32 in_ptr;
if (ATA_PROT_DMA != qc->tf.protocol) {
@@ -1221,23 +1223,20 @@
return ata_qc_issue_prot(qc);
}
- in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+ in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+ in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
- /* the req producer index should be the same as we remember it */
- WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->req_producer);
/* until we do queuing, the queue should be empty at this point */
- WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+ WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
- mv_inc_q_index(&pp->req_producer); /* now incr producer index */
+ in_index = mv_inc_q_index(in_index); /* now incr producer index */
mv_start_dma(port_mmio, pp);
/* and write the request in pointer to kick the EDMA to life */
in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
- in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+ in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
return 0;
@@ -1260,28 +1259,26 @@
{
void __iomem *port_mmio = mv_ap_base(ap);
struct mv_port_priv *pp = ap->private_data;
+ unsigned out_index;
u32 out_ptr;
u8 ata_status;
- out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+ out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+ out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
- /* the response consumer index should be the same as we remember it */
- WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->rsp_consumer);
-
- ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+ ata_status = le16_to_cpu(pp->crpb[out_index].flags)
+ >> CRPB_FLAG_STATUS_SHIFT;
/* increment our consumer index... */
- pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+ out_index = mv_inc_q_index(out_index);
/* and, until we do NCQ, there should only be 1 CRPB waiting */
- WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
- EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
- pp->rsp_consumer);
+ WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+ >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
/* write out our inc'd consumer index so EDMA knows we're caught up */
out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
- out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+ out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
/* Return ATA status register for completed CRPB */
@@ -1291,6 +1288,7 @@
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
+ * @reset_allowed: bool: 0 == don't trigger from reset here
*
* In most cases, just clear the interrupt and move on. However,
* some cases require an eDMA reset, which is done right before
@@ -1301,7 +1299,7 @@
* LOCKING:
* Inherited from caller.
*/
-static void mv_err_intr(struct ata_port *ap)
+static void mv_err_intr(struct ata_port *ap, int reset_allowed)
{
void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, serr = 0;
@@ -1323,9 +1321,8 @@
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
/* check for fatal here and recover if needed */
- if (EDMA_ERR_FATAL & edma_err_cause) {
+ if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
mv_stop_and_reset(ap);
- }
}
/**
@@ -1374,12 +1371,12 @@
struct ata_port *ap = host_set->ports[port];
struct mv_port_priv *pp = ap->private_data;
- hard_port = port & MV_PORT_MASK; /* range 0-3 */
+ hard_port = mv_hardport_from_port(port); /* range 0..3 */
handled = 0; /* ensure ata_status is set if handled++ */
/* Note that DEV_IRQ might happen spuriously during EDMA,
- * and should be ignored in such cases. We could mask it,
- * but it's pretty rare and may not be worth the overhead.
+ * and should be ignored in such cases.
+ * The cause of this is still under investigation.
*/
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
/* EDMA: check for response queue interrupt */
@@ -1393,6 +1390,11 @@
ata_status = readb((void __iomem *)
ap->ioaddr.status_addr);
handled = 1;
+ /* ignore spurious intr if drive still BUSY */
+ if (ata_status & ATA_BUSY) {
+ ata_status = 0;
+ handled = 0;
+ }
}
}
@@ -1406,7 +1408,7 @@
shift++; /* skip bit 8 in the HC Main IRQ reg */
}
if ((PORT0_ERR << shift) & relevant) {
- mv_err_intr(ap);
+ mv_err_intr(ap, 1);
err_mask |= AC_ERR_OTHER;
handled = 1;
}
@@ -1448,6 +1450,7 @@
struct ata_host_set *host_set = dev_instance;
unsigned int hc, handled = 0, n_hcs;
void __iomem *mmio = host_set->mmio_base;
+ struct mv_host_priv *hpriv;
u32 irq_stat;
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
@@ -1469,6 +1472,17 @@
handled++;
}
}
+
+ hpriv = host_set->private_data;
+ if (IS_60XX(hpriv)) {
+ /* deal with the interrupt coalescing bits */
+ if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
+ writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
+ writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
+ writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+ }
+ }
+
if (PCI_ERR & irq_stat) {
printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
readl(mmio + PCI_IRQ_CAUSE_OFS));
@@ -1867,7 +1881,8 @@
if (IS_60XX(hpriv)) {
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 12) | (1 << 7);
+ ifctl |= (1 << 7); /* enable gen2i speed */
+ ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
}
@@ -2031,11 +2046,14 @@
ap->host_set->mmio_base, ap, qc, qc->scsicmd,
&qc->scsicmd->cmnd);
- mv_err_intr(ap);
+ mv_err_intr(ap, 0);
mv_stop_and_reset(ap);
- qc->err_mask |= AC_ERR_TIMEOUT;
- ata_eh_qc_complete(qc);
+ WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ if (qc->flags & ATA_QCFLAG_ACTIVE) {
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ata_eh_qc_complete(qc);
+ }
}
/**
@@ -2229,7 +2247,8 @@
void __iomem *port_mmio = mv_port_base(mmio, port);
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 12);
+ ifctl |= (1 << 7); /* enable gen2i speed */
+ ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
}
@@ -2330,6 +2349,7 @@
if (rc) {
return rc;
}
+ pci_set_master(pdev);
rc = pci_request_regions(pdev, DRV_NAME);
if (rc) {
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index d40e7c8..56cb490 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4054,7 +4054,7 @@
}
sdev_printk(KERN_WARNING, SDp,
- "Attached scsi tape %s", tape_name(tpnt));
+ "Attached scsi tape %s\n", tape_name(tpnt));
printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n",
tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
queue_dma_alignment(SDp->request_queue) + 1);
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 969f949..5cba59a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -1164,14 +1164,16 @@
struct fs_uart_platform_info *pdata;
struct platform_device* pdev = early_uart_get_pdev(co->index);
- port =
- (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
- pinfo = (struct uart_cpm_port *)port;
if (!pdev) {
pr_info("cpm_uart: console: compat mode\n");
/* compatibility - will be cleaned up */
cpm_uart_init_portdesc();
+ }
+ port =
+ (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
+ pinfo = (struct uart_cpm_port *)port;
+ if (!pdev) {
if (pinfo->set_lineif)
pinfo->set_lineif(pinfo);
} else {
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 4b2de08..cdba128 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -213,7 +213,7 @@
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
mem_addr = alloc_bootmem(memsz);
- dma_addr = mem_addr;
+ dma_addr = virt_to_bus(mem_addr);
}
else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 1c4396c..2b4f965 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1730,3 +1730,4 @@
module_init(sunsu_probe);
module_exit(sunsu_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9ce1d01..23334c8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,6 +75,18 @@
inexpensive battery powered microcontroller evaluation board.
This same cable can be used to flash new firmware.
+config SPI_MPC83xx
+ tristate "Freescale MPC83xx SPI controller"
+ depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+ select SPI_BITBANG
+ help
+ This enables using the Freescale MPC83xx SPI controller in master
+ mode.
+
+ Note, this driver uniquely supports the SPI controller on the MPC83xx
+ family of PowerPC processors. The MPC83xx uses a simple set of shift
+ registers for data (opposed to the CPM based descriptor model).
+
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
@@ -83,11 +95,25 @@
The driver can be configured to use any SSP port and additional
documentation can be found a Documentation/spi/pxa2xx.
+config SPI_S3C24XX_GPIO
+ tristate "Samsung S3C24XX series SPI by GPIO"
+ depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs using
+ GPIO lines to provide the SPI bus. This can be used where
+ the inbuilt hardware cannot provide the transfer mode, or
+ where the board is using non hardware connected pins.
#
# Add new SPI master controllers in alphabetical order above this line
#
+config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+ help
+ SPI driver for Samsung S3C24XX series ARM SoCs
+
#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 1bca5f9..8f4cb67 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -14,6 +14,9 @@
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
+obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
+obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
+obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 596bf82..29aec77 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -363,25 +363,30 @@
}
/* caller already set message->status; dma and pio irqs are blocked */
-static void giveback(struct spi_message *message, struct driver_data *drv_data)
+static void giveback(struct driver_data *drv_data)
{
struct spi_transfer* last_transfer;
+ unsigned long flags;
+ struct spi_message *msg;
- last_transfer = list_entry(message->transfers.prev,
+ spin_lock_irqsave(&drv_data->lock, flags);
+ msg = drv_data->cur_msg;
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ last_transfer = list_entry(msg->transfers.prev,
struct spi_transfer,
transfer_list);
if (!last_transfer->cs_change)
drv_data->cs_control(PXA2XX_CS_DEASSERT);
- message->state = NULL;
- if (message->complete)
- message->complete(message->context);
-
- drv_data->cur_msg = NULL;
- drv_data->cur_transfer = NULL;
- drv_data->cur_chip = NULL;
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
+ msg->state = NULL;
+ if (msg->complete)
+ msg->complete(msg->context);
}
static int wait_ssp_rx_stall(void *ioaddr)
@@ -415,10 +420,11 @@
if (irq_status & DCSR_BUSERR) {
/* Disable interrupts, clear status and reset DMA */
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
@@ -454,8 +460,8 @@
"dma_handler: ssp rx stall failed\n");
/* Clear and disable interrupts on SSP and DMA channels*/
- write_SSSR(drv_data->clear_sr, reg);
write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+ write_SSSR(drv_data->clear_sr, reg);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
@@ -497,10 +503,11 @@
irq_status = read_SSSR(reg) & drv_data->mask_sr;
if (irq_status & SSSR_ROR) {
/* Clear and disable interrupts on SSP and DMA channels*/
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
unmap_dma_buffers(drv_data);
@@ -526,10 +533,10 @@
if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
/* Clear and disable interrupts on SSP and DMA channels*/
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
@@ -572,26 +579,30 @@
static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
{
- u32 irq_status;
struct spi_message *msg = drv_data->cur_msg;
void *reg = drv_data->ioaddr;
- irqreturn_t handled = IRQ_NONE;
unsigned long limit = loops_per_jiffy << 1;
+ u32 irq_status;
+ u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
+ drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
- while ((irq_status = (read_SSSR(reg) & drv_data->mask_sr))) {
+ while ((irq_status = read_SSSR(reg) & irq_mask)) {
if (irq_status & SSSR_ROR) {
/* Clear and disable interrupts */
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
if (flush(drv_data) == 0)
dev_err(&drv_data->pdev->dev,
"interrupt_transfer: flush fail\n");
+ /* Stop the SSP */
+
dev_warn(&drv_data->pdev->dev,
"interrupt_transfer: fifo overun\n");
@@ -613,6 +624,7 @@
if (drv_data->tx == drv_data->tx_end) {
/* Disable tx interrupt */
write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+ irq_mask = drv_data->mask_sr & ~SSSR_TFS;
/* PXA25x_SSP has no timeout, read trailing bytes */
if (drv_data->ssp_type == PXA25x_SSP) {
@@ -630,10 +642,10 @@
|| (drv_data->rx == drv_data->rx_end)) {
/* Clear timeout */
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
if (drv_data->ssp_type != PXA25x_SSP)
write_SSTO(0, reg);
write_SSSR(drv_data->clear_sr, reg);
- write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
/* Update total byte transfered */
msg->actual_length += drv_data->len;
@@ -648,24 +660,29 @@
/* Schedule transfer tasklet */
tasklet_schedule(&drv_data->pump_transfers);
-
- return IRQ_HANDLED;
}
-
- /* We did something */
- handled = IRQ_HANDLED;
}
- return handled;
+ /* We did something */
+ return IRQ_HANDLED;
}
static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs)
{
struct driver_data *drv_data = (struct driver_data *)dev_id;
+ void *reg = drv_data->ioaddr;
if (!drv_data->cur_msg) {
+
+ write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+ write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+ if (drv_data->ssp_type != PXA25x_SSP)
+ write_SSTO(0, reg);
+ write_SSSR(drv_data->clear_sr, reg);
+
dev_err(&drv_data->pdev->dev, "bad message state "
- "in interrupt handler\n");
+ "in interrupt handler");
+
/* Never fail */
return IRQ_HANDLED;
}
@@ -694,14 +711,14 @@
/* Handle for abort */
if (message->state == ERROR_STATE) {
message->status = -EIO;
- giveback(message, drv_data);
+ giveback(drv_data);
return;
}
/* Handle end of message */
if (message->state == DONE_STATE) {
message->status = 0;
- giveback(message, drv_data);
+ giveback(drv_data);
return;
}
@@ -718,7 +735,7 @@
if (flush(drv_data) == 0) {
dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
message->status = -EIO;
- giveback(message, drv_data);
+ giveback(drv_data);
return;
}
drv_data->n_bytes = chip->n_bytes;
@@ -782,7 +799,7 @@
cr0 = clk_div
| SSCR0_Motorola
- | SSCR0_DataSize(bits & 0x0f)
+ | SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
| SSCR0_SSE
| (bits > 16 ? SSCR0_EDSS : 0);
@@ -890,8 +907,6 @@
drv_data->cur_msg = list_entry(drv_data->queue.next,
struct spi_message, queue);
list_del_init(&drv_data->cur_msg->queue);
- drv_data->busy = 1;
- spin_unlock_irqrestore(&drv_data->lock, flags);
/* Initial message state*/
drv_data->cur_msg->state = START_STATE;
@@ -905,6 +920,9 @@
/* Mark as busy and launch transfers */
tasklet_schedule(&drv_data->pump_transfers);
+
+ drv_data->busy = 1;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
}
static int transfer(struct spi_device *spi, struct spi_message *msg)
@@ -958,7 +976,7 @@
chip->cs_control = null_cs_control;
chip->enable_dma = 0;
- chip->timeout = 5;
+ chip->timeout = SSP_TIMEOUT(1000);
chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
chip->dma_burst_size = drv_data->master_info->enable_dma ?
DCMD_BURST8 : 0;
@@ -971,7 +989,7 @@
if (chip_info->cs_control)
chip->cs_control = chip_info->cs_control;
- chip->timeout = (chip_info->timeout_microsecs * 10000) / 2712;
+ chip->timeout = SSP_TIMEOUT(chip_info->timeout_microsecs);
chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
| SSCR1_TxTresh(chip_info->tx_threshold);
@@ -1013,7 +1031,8 @@
chip->cr0 = clk_div
| SSCR0_Motorola
- | SSCR0_DataSize(spi->bits_per_word & 0x0f)
+ | SSCR0_DataSize(spi->bits_per_word > 16 ?
+ spi->bits_per_word - 16 : spi->bits_per_word)
| SSCR0_SSE
| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
@@ -1196,7 +1215,7 @@
goto out_error_master_alloc;
}
- drv_data->ioaddr = (void *)io_p2v(memory_resource->start);
+ drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
drv_data->ssdr_physical = memory_resource->start + 0x00000010;
if (platform_info->ssp_type == PXA25x_SSP) {
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
@@ -1218,7 +1237,7 @@
goto out_error_master_alloc;
}
- status = request_irq(irq, ssp_int, SA_INTERRUPT, dev->bus_id, drv_data);
+ status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
if (status < 0) {
dev_err(&pdev->dev, "can not get IRQ\n");
goto out_error_master_alloc;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 7a3f733..1cea4a6 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -338,18 +338,18 @@
* spi_alloc_master - allocate SPI master controller
* @dev: the controller, possibly using the platform_bus
* @size: how much driver-private data to preallocate; the pointer to this
- * memory is in the class_data field of the returned class_device,
+ * memory is in the class_data field of the returned class_device,
* accessible with spi_master_get_devdata().
*
* This call is used only by SPI master controller drivers, which are the
* only ones directly touching chip registers. It's how they allocate
- * an spi_master structure, prior to calling spi_add_master().
+ * an spi_master structure, prior to calling spi_register_master().
*
* This must be called from context that can sleep. It returns the SPI
* master structure on success, else NULL.
*
* The caller is responsible for assigning the bus number and initializing
- * the master's methods before calling spi_add_master(); and (after errors
+ * the master's methods before calling spi_register_master(); and (after errors
* adding the device) calling spi_master_put() to prevent a memory leak.
*/
struct spi_master * __init_or_module
diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c
index ff9e5fa..a006a1e 100644
--- a/drivers/spi/spi_butterfly.c
+++ b/drivers/spi/spi_butterfly.c
@@ -321,6 +321,7 @@
* (firmware resets at45, acts as spi slave) or neither (we ignore
* both, AVR uses AT45). Here we expect firmware for the first option.
*/
+
pp->info[0].max_speed_hz = 15 * 1000 * 1000;
strcpy(pp->info[0].modalias, "mtd_dataflash");
pp->info[0].platform_data = &flash;
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
new file mode 100644
index 0000000..5d92a7e
--- /dev/null
+++ b/drivers/spi/spi_mpc83xx.c
@@ -0,0 +1,483 @@
+/*
+ * MPC83xx SPI controller driver.
+ *
+ * Maintainer: Kumar Gala
+ *
+ * Copyright (C) 2006 Polycom, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+/* SPI Controller registers */
+struct mpc83xx_spi_reg {
+ u8 res1[0x20];
+ __be32 mode;
+ __be32 event;
+ __be32 mask;
+ __be32 command;
+ __be32 transmit;
+ __be32 receive;
+};
+
+/* SPI Controller mode register definitions */
+#define SPMODE_CI_INACTIVEHIGH (1 << 29)
+#define SPMODE_CP_BEGIN_EDGECLK (1 << 28)
+#define SPMODE_DIV16 (1 << 27)
+#define SPMODE_REV (1 << 26)
+#define SPMODE_MS (1 << 25)
+#define SPMODE_ENABLE (1 << 24)
+#define SPMODE_LEN(x) ((x) << 20)
+#define SPMODE_PM(x) ((x) << 16)
+
+/*
+ * Default for SPI Mode:
+ * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk
+ */
+#define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \
+ SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf))
+
+/* SPIE register values */
+#define SPIE_NE 0x00000200 /* Not empty */
+#define SPIE_NF 0x00000100 /* Not full */
+
+/* SPIM register values */
+#define SPIM_NE 0x00000200 /* Not empty */
+#define SPIM_NF 0x00000100 /* Not full */
+
+/* SPI Controller driver's private data. */
+struct mpc83xx_spi {
+ /* bitbang has to be first */
+ struct spi_bitbang bitbang;
+ struct completion done;
+
+ struct mpc83xx_spi_reg __iomem *base;
+
+ /* rx & tx bufs from the spi_transfer */
+ const void *tx;
+ void *rx;
+
+ /* functions to deal with different sized buffers */
+ void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
+ u32(*get_tx) (struct mpc83xx_spi *);
+
+ unsigned int count;
+ u32 irq;
+
+ unsigned nsecs; /* (clock cycle time)/2 */
+
+ u32 sysclk;
+ void (*activate_cs) (u8 cs, u8 polarity);
+ void (*deactivate_cs) (u8 cs, u8 polarity);
+};
+
+static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+{
+ out_be32(reg, val);
+}
+
+static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
+{
+ return in_be32(reg);
+}
+
+#define MPC83XX_SPI_RX_BUF(type) \
+void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
+{ \
+ type * rx = mpc83xx_spi->rx; \
+ *rx++ = (type)data; \
+ mpc83xx_spi->rx = rx; \
+}
+
+#define MPC83XX_SPI_TX_BUF(type) \
+u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi) \
+{ \
+ u32 data; \
+ const type * tx = mpc83xx_spi->tx; \
+ data = *tx++; \
+ mpc83xx_spi->tx = tx; \
+ return data; \
+}
+
+MPC83XX_SPI_RX_BUF(u8)
+MPC83XX_SPI_RX_BUF(u16)
+MPC83XX_SPI_RX_BUF(u32)
+MPC83XX_SPI_TX_BUF(u8)
+MPC83XX_SPI_TX_BUF(u16)
+MPC83XX_SPI_TX_BUF(u32)
+
+static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (value == BITBANG_CS_INACTIVE) {
+ if (mpc83xx_spi->deactivate_cs)
+ mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
+ }
+
+ if (value == BITBANG_CS_ACTIVE) {
+ u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ u32 len = spi->bits_per_word;
+ if (len == 32)
+ len = 0;
+ else
+ len = len - 1;
+
+ /* mask out bits we are going to set */
+ regval &= ~0x38ff0000;
+
+ if (spi->mode & SPI_CPHA)
+ regval |= SPMODE_CP_BEGIN_EDGECLK;
+ if (spi->mode & SPI_CPOL)
+ regval |= SPMODE_CI_INACTIVEHIGH;
+
+ regval |= SPMODE_LEN(len);
+
+ if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
+ u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+ regval |= SPMODE_PM(pm) | SPMODE_DIV16;
+ } else {
+ u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
+ regval |= SPMODE_PM(pm);
+ }
+
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+ if (mpc83xx_spi->activate_cs)
+ mpc83xx_spi->activate_cs(spi->chip_select, pol);
+ }
+}
+
+static
+int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ u32 regval;
+ u8 bits_per_word;
+ u32 hz;
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (t) {
+ bits_per_word = t->bits_per_word;
+ hz = t->speed_hz;
+ } else {
+ bits_per_word = 0;
+ hz = 0;
+ }
+
+ /* spi_transfer level calls that work per-word */
+ if (!bits_per_word)
+ bits_per_word = spi->bits_per_word;
+
+ /* Make sure its a bit width we support [4..16, 32] */
+ if ((bits_per_word < 4)
+ || ((bits_per_word > 16) && (bits_per_word != 32)))
+ return -EINVAL;
+
+ if (bits_per_word <= 8) {
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ } else if (bits_per_word <= 16) {
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+ } else if (bits_per_word <= 32) {
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
+ } else
+ return -EINVAL;
+
+ /* nsecs = (clock period)/2 */
+ if (!hz)
+ hz = spi->max_speed_hz;
+ mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
+ if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
+ return -EINVAL;
+
+ if (bits_per_word == 32)
+ bits_per_word = 0;
+ else
+ bits_per_word = bits_per_word - 1;
+
+ regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+
+ /* Mask out bits_per_wordgth */
+ regval &= 0xff0fffff;
+ regval |= SPMODE_LEN(bits_per_word);
+
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+ return 0;
+}
+
+static int mpc83xx_spi_setup(struct spi_device *spi)
+{
+ struct spi_bitbang *bitbang;
+ struct mpc83xx_spi *mpc83xx_spi;
+ int retval;
+
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ bitbang = spi_master_get_devdata(spi->master);
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ retval = mpc83xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0)
+ return retval;
+
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+ __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
+
+ /* NOTE we _need_ to call chipselect() early, ideally with adapter
+ * setup, unless the hardware defaults cooperate to avoid confusion
+ * between normal (active low) and inverted chipselects.
+ */
+
+ /* deselect chip (low or high) */
+ spin_lock(&bitbang->lock);
+ if (!bitbang->busy) {
+ bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(mpc83xx_spi->nsecs);
+ }
+ spin_unlock(&bitbang->lock);
+
+ return 0;
+}
+
+static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ u32 word;
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ mpc83xx_spi->tx = t->tx_buf;
+ mpc83xx_spi->rx = t->rx_buf;
+ mpc83xx_spi->count = t->len;
+ INIT_COMPLETION(mpc83xx_spi->done);
+
+ /* enable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+
+ /* transmit word */
+ word = mpc83xx_spi->get_tx(mpc83xx_spi);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+
+ wait_for_completion(&mpc83xx_spi->done);
+
+ /* disable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+
+ return t->len - mpc83xx_spi->count;
+}
+
+irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data,
+ struct pt_regs * ptregs)
+{
+ struct mpc83xx_spi *mpc83xx_spi = context_data;
+ u32 event;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* Get interrupt events(tx/rx) */
+ event = mpc83xx_spi_read_reg(&mpc83xx_spi->base->event);
+
+ /* We need handle RX first */
+ if (event & SPIE_NE) {
+ u32 rx_data = mpc83xx_spi_read_reg(&mpc83xx_spi->base->receive);
+
+ if (mpc83xx_spi->rx)
+ mpc83xx_spi->get_rx(rx_data, mpc83xx_spi);
+
+ ret = IRQ_HANDLED;
+ }
+
+ if ((event & SPIE_NF) == 0)
+ /* spin until TX is done */
+ while (((event =
+ mpc83xx_spi_read_reg(&mpc83xx_spi->base->event)) &
+ SPIE_NF) == 0)
+ cpu_relax();
+
+ mpc83xx_spi->count -= 1;
+ if (mpc83xx_spi->count) {
+ if (mpc83xx_spi->tx) {
+ u32 word = mpc83xx_spi->get_tx(mpc83xx_spi);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit,
+ word);
+ }
+ } else {
+ complete(&mpc83xx_spi->done);
+ }
+
+ /* Clear the events */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, event);
+
+ return ret;
+}
+
+static int __init mpc83xx_spi_probe(struct platform_device *dev)
+{
+ struct spi_master *master;
+ struct mpc83xx_spi *mpc83xx_spi;
+ struct fsl_spi_platform_data *pdata;
+ struct resource *r;
+ u32 regval;
+ int ret = 0;
+
+ /* Get resources(memory, IRQ) associated with the device */
+ master = spi_alloc_master(&dev->dev, sizeof(struct mpc83xx_spi));
+
+ if (master == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ platform_set_drvdata(dev, master);
+ pdata = dev->dev.platform_data;
+
+ if (pdata == NULL) {
+ ret = -ENODEV;
+ goto free_master;
+ }
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ ret = -ENODEV;
+ goto free_master;
+ }
+
+ mpc83xx_spi = spi_master_get_devdata(master);
+ mpc83xx_spi->bitbang.master = spi_master_get(master);
+ mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
+ mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
+ mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
+ mpc83xx_spi->sysclk = pdata->sysclk;
+ mpc83xx_spi->activate_cs = pdata->activate_cs;
+ mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
+ mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+ mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+
+ mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
+ init_completion(&mpc83xx_spi->done);
+
+ mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
+ if (mpc83xx_spi->base == NULL) {
+ ret = -ENOMEM;
+ goto put_master;
+ }
+
+ mpc83xx_spi->irq = platform_get_irq(dev, 0);
+
+ if (mpc83xx_spi->irq < 0) {
+ ret = -ENXIO;
+ goto unmap_io;
+ }
+
+ /* Register for SPI Interrupt */
+ ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
+ 0, "mpc83xx_spi", mpc83xx_spi);
+
+ if (ret != 0)
+ goto unmap_io;
+
+ master->bus_num = pdata->bus_num;
+ master->num_chipselect = pdata->max_chipselect;
+
+ /* SPI controller initializations */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->command, 0);
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, 0xffffffff);
+
+ /* Enable SPI interface */
+ regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+ ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
+
+ if (ret != 0)
+ goto free_irq;
+
+ printk(KERN_INFO
+ "%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
+ dev->dev.bus_id, mpc83xx_spi->base, mpc83xx_spi->irq);
+
+ return ret;
+
+free_irq:
+ free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+unmap_io:
+ iounmap(mpc83xx_spi->base);
+put_master:
+ spi_master_put(master);
+free_master:
+ kfree(master);
+err:
+ return ret;
+}
+
+static int __devexit mpc83xx_spi_remove(struct platform_device *dev)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ struct spi_master *master;
+
+ master = platform_get_drvdata(dev);
+ mpc83xx_spi = spi_master_get_devdata(master);
+
+ spi_bitbang_stop(&mpc83xx_spi->bitbang);
+ free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+ iounmap(mpc83xx_spi->base);
+ spi_master_put(mpc83xx_spi->bitbang.master);
+
+ return 0;
+}
+
+static struct platform_driver mpc83xx_spi_driver = {
+ .probe = mpc83xx_spi_probe,
+ .remove = __devexit_p(mpc83xx_spi_remove),
+ .driver = {
+ .name = "mpc83xx_spi",
+ },
+};
+
+static int __init mpc83xx_spi_init(void)
+{
+ return platform_driver_register(&mpc83xx_spi_driver);
+}
+
+static void __exit mpc83xx_spi_exit(void)
+{
+ platform_driver_unregister(&mpc83xx_spi_driver);
+}
+
+module_init(mpc83xx_spi_init);
+module_exit(mpc83xx_spi_exit);
+
+MODULE_AUTHOR("Kumar Gala");
+MODULE_DESCRIPTION("Simple MPC83xx SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
new file mode 100644
index 0000000..5fc1456
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx.c
@@ -0,0 +1,453 @@
+/* linux/drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-spi.h>
+#include <asm/arch/spi.h>
+
+struct s3c24xx_spi {
+ /* bitbang has to be first */
+ struct spi_bitbang bitbang;
+ struct completion done;
+
+ void __iomem *regs;
+ int irq;
+ int len;
+ int count;
+
+ /* data buffers */
+ const unsigned char *tx;
+ unsigned char *rx;
+
+ struct clk *clk;
+ struct resource *ioarea;
+ struct spi_master *master;
+ struct spi_device *curdev;
+ struct device *dev;
+ struct s3c2410_spi_info *pdata;
+};
+
+#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
+#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
+
+static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
+{
+ return spi_master_get_devdata(sdev->master);
+}
+
+static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
+{
+ struct s3c24xx_spi *hw = to_hw(spi);
+ unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+ unsigned int spcon;
+
+ switch (value) {
+ case BITBANG_CS_INACTIVE:
+ if (hw->pdata->set_cs)
+ hw->pdata->set_cs(hw->pdata, value, cspol);
+ else
+ s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+ break;
+
+ case BITBANG_CS_ACTIVE:
+ spcon = readb(hw->regs + S3C2410_SPCON);
+
+ if (spi->mode & SPI_CPHA)
+ spcon |= S3C2410_SPCON_CPHA_FMTB;
+ else
+ spcon &= ~S3C2410_SPCON_CPHA_FMTB;
+
+ if (spi->mode & SPI_CPOL)
+ spcon |= S3C2410_SPCON_CPOL_HIGH;
+ else
+ spcon &= ~S3C2410_SPCON_CPOL_HIGH;
+
+ spcon |= S3C2410_SPCON_ENSCK;
+
+ /* write new configration */
+
+ writeb(spcon, hw->regs + S3C2410_SPCON);
+
+ if (hw->pdata->set_cs)
+ hw->pdata->set_cs(hw->pdata, value, cspol);
+ else
+ s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+
+ break;
+
+ }
+}
+
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct s3c24xx_spi *hw = to_hw(spi);
+ unsigned int bpw;
+ unsigned int hz;
+ unsigned int div;
+
+ bpw = t ? t->bits_per_word : spi->bits_per_word;
+ hz = t ? t->speed_hz : spi->max_speed_hz;
+
+ if (bpw != 8) {
+ dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+ return -EINVAL;
+ }
+
+ div = clk_get_rate(hw->clk) / hz;
+
+ /* is clk = pclk / (2 * (pre+1)), or is it
+ * clk = (pclk * 2) / ( pre + 1) */
+
+ div = (div / 2) - 1;
+
+ if (div < 0)
+ div = 1;
+
+ if (div > 255)
+ div = 255;
+
+ dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+ writeb(div, hw->regs + S3C2410_SPPRE);
+
+ spin_lock(&hw->bitbang.lock);
+ if (!hw->bitbang.busy) {
+ hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+ /* need to ndelay for 0.5 clocktick ? */
+ }
+ spin_unlock(&hw->bitbang.lock);
+
+ return 0;
+}
+
+static int s3c24xx_spi_setup(struct spi_device *spi)
+{
+ int ret;
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ if ((spi->mode & SPI_LSB_FIRST) != 0)
+ return -EINVAL;
+
+ ret = s3c24xx_spi_setupxfer(spi, NULL);
+ if (ret < 0) {
+ dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+ return ret;
+ }
+
+ dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
+ __FUNCTION__, spi->mode, spi->bits_per_word,
+ spi->max_speed_hz);
+
+ return 0;
+}
+
+static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
+{
+ return hw->tx ? hw->tx[count] : 0xff;
+}
+
+static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct s3c24xx_spi *hw = to_hw(spi);
+
+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+ t->tx_buf, t->rx_buf, t->len);
+
+ hw->tx = t->tx_buf;
+ hw->rx = t->rx_buf;
+ hw->len = t->len;
+ hw->count = 0;
+
+ /* send the first byte */
+ writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
+ wait_for_completion(&hw->done);
+
+ return hw->count;
+}
+
+static irqreturn_t s3c24xx_spi_irq(int irq, void *dev, struct pt_regs *regs)
+{
+ struct s3c24xx_spi *hw = dev;
+ unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
+ unsigned int count = hw->count;
+
+ if (spsta & S3C2410_SPSTA_DCOL) {
+ dev_dbg(hw->dev, "data-collision\n");
+ complete(&hw->done);
+ goto irq_done;
+ }
+
+ if (!(spsta & S3C2410_SPSTA_READY)) {
+ dev_dbg(hw->dev, "spi not ready for tx?\n");
+ complete(&hw->done);
+ goto irq_done;
+ }
+
+ hw->count++;
+
+ if (hw->rx)
+ hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
+
+ count++;
+
+ if (count < hw->len)
+ writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
+ else
+ complete(&hw->done);
+
+ irq_done:
+ return IRQ_HANDLED;
+}
+
+static int s3c24xx_spi_probe(struct platform_device *pdev)
+{
+ struct s3c24xx_spi *hw;
+ struct spi_master *master;
+ struct spi_board_info *bi;
+ struct resource *res;
+ int err = 0;
+ int i;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "No memory for spi_master\n");
+ err = -ENOMEM;
+ goto err_nomem;
+ }
+
+ hw = spi_master_get_devdata(master);
+ memset(hw, 0, sizeof(struct s3c24xx_spi));
+
+ hw->master = spi_master_get(master);
+ hw->pdata = pdev->dev.platform_data;
+ hw->dev = &pdev->dev;
+
+ if (hw->pdata == NULL) {
+ dev_err(&pdev->dev, "No platform data supplied\n");
+ err = -ENOENT;
+ goto err_no_pdata;
+ }
+
+ platform_set_drvdata(pdev, hw);
+ init_completion(&hw->done);
+
+ /* setup the state for the bitbang driver */
+
+ hw->bitbang.master = hw->master;
+ hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
+ hw->bitbang.chipselect = s3c24xx_spi_chipsel;
+ hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
+ hw->bitbang.master->setup = s3c24xx_spi_setup;
+
+ dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
+
+ /* find and map our resources */
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+ err = -ENOENT;
+ goto err_no_iores;
+ }
+
+ hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
+ pdev->name);
+
+ if (hw->ioarea == NULL) {
+ dev_err(&pdev->dev, "Cannot reserve region\n");
+ err = -ENXIO;
+ goto err_no_iores;
+ }
+
+ hw->regs = ioremap(res->start, (res->end - res->start)+1);
+ if (hw->regs == NULL) {
+ dev_err(&pdev->dev, "Cannot map IO\n");
+ err = -ENXIO;
+ goto err_no_iomap;
+ }
+
+ hw->irq = platform_get_irq(pdev, 0);
+ if (hw->irq < 0) {
+ dev_err(&pdev->dev, "No IRQ specified\n");
+ err = -ENOENT;
+ goto err_no_irq;
+ }
+
+ err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto err_no_irq;
+ }
+
+ hw->clk = clk_get(&pdev->dev, "spi");
+ if (IS_ERR(hw->clk)) {
+ dev_err(&pdev->dev, "No clock for device\n");
+ err = PTR_ERR(hw->clk);
+ goto err_no_clk;
+ }
+
+ /* for the moment, permanently enable the clock */
+
+ clk_enable(hw->clk);
+
+ /* program defaults into the registers */
+
+ writeb(0xff, hw->regs + S3C2410_SPPRE);
+ writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+ writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+ /* setup any gpio we can */
+
+ if (!hw->pdata->set_cs) {
+ s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
+ s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+ }
+
+ /* register our spi controller */
+
+ err = spi_bitbang_start(&hw->bitbang);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to register SPI master\n");
+ goto err_register;
+ }
+
+ dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
+
+ /* register all the devices associated */
+
+ bi = &hw->pdata->board_info[0];
+ for (i = 0; i < hw->pdata->board_size; i++, bi++) {
+ dev_info(hw->dev, "registering %s\n", bi->modalias);
+
+ bi->controller_data = hw;
+ spi_new_device(master, bi);
+ }
+
+ return 0;
+
+ err_register:
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+
+ err_no_clk:
+ free_irq(hw->irq, hw);
+
+ err_no_irq:
+ iounmap(hw->regs);
+
+ err_no_iomap:
+ release_resource(hw->ioarea);
+ kfree(hw->ioarea);
+
+ err_no_iores:
+ err_no_pdata:
+ spi_master_put(hw->master);;
+
+ err_nomem:
+ return err;
+}
+
+static int s3c24xx_spi_remove(struct platform_device *dev)
+{
+ struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ spi_unregister_master(hw->master);
+
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+
+ free_irq(hw->irq, hw);
+ iounmap(hw->regs);
+
+ release_resource(hw->ioarea);
+ kfree(hw->ioarea);
+
+ spi_master_put(hw->master);
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+ struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+
+ clk_disable(hw->clk);
+ return 0;
+}
+
+static int s3c24xx_spi_resume(struct platform_device *pdev)
+{
+ struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+
+ clk_enable(hw->clk);
+ return 0;
+}
+
+#else
+#define s3c24xx_spi_suspend NULL
+#define s3c24xx_spi_resume NULL
+#endif
+
+static struct platform_driver s3c24xx_spidrv = {
+ .probe = s3c24xx_spi_probe,
+ .remove = s3c24xx_spi_remove,
+ .suspend = s3c24xx_spi_suspend,
+ .resume = s3c24xx_spi_resume,
+ .driver = {
+ .name = "s3c2410-spi",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s3c24xx_spi_init(void)
+{
+ return platform_driver_register(&s3c24xx_spidrv);
+}
+
+static void __exit s3c24xx_spi_exit(void)
+{
+ platform_driver_unregister(&s3c24xx_spidrv);
+}
+
+module_init(s3c24xx_spi_init);
+module_exit(s3c24xx_spi_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
new file mode 100644
index 0000000..aacdceb
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -0,0 +1,188 @@
+/* linux/drivers/spi/spi_s3c24xx_gpio.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *
+ * S3C24XX GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/hardware.h>
+
+struct s3c2410_spigpio {
+ struct spi_bitbang bitbang;
+
+ struct s3c2410_spigpio_info *info;
+ struct platform_device *dev;
+};
+
+static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
+{
+ return spi->controller_data;
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+ s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+ s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+ return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+
+static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
+ unsigned nsecs, u32 word, u8 bits)
+{
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
+{
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+
+ if (sg->info && sg->info->chip_select)
+ (sg->info->chip_select)(sg->info, value);
+}
+
+static int s3c2410_spigpio_probe(struct platform_device *dev)
+{
+ struct spi_master *master;
+ struct s3c2410_spigpio *sp;
+ int ret;
+ int i;
+
+ master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio));
+ if (master == NULL) {
+ dev_err(&dev->dev, "failed to allocate spi master\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ sp = spi_master_get_devdata(master);
+
+ platform_set_drvdata(dev, sp);
+
+ /* copy in the plkatform data */
+ sp->info = dev->dev.platform_data;
+
+ /* setup spi bitbang adaptor */
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
+
+ sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+ sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+
+ /* set state of spi pins */
+ s3c2410_gpio_setpin(sp->info->pin_clk, 0);
+ s3c2410_gpio_setpin(sp->info->pin_mosi, 0);
+
+ s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT);
+
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (ret)
+ goto err_no_bitbang;
+
+ /* register the chips to go with the board */
+
+ for (i = 0; i < sp->info->board_size; i++) {
+ dev_info(&dev->dev, "registering %p: %s\n",
+ &sp->info->board_info[i],
+ sp->info->board_info[i].modalias);
+
+ sp->info->board_info[i].controller_data = sp;
+ spi_new_device(master, sp->info->board_info + i);
+ }
+
+ return 0;
+
+ err_no_bitbang:
+ spi_master_put(sp->bitbang.master);
+ err:
+ return ret;
+
+}
+
+static int s3c2410_spigpio_remove(struct platform_device *dev)
+{
+ struct s3c2410_spigpio *sp = platform_get_drvdata(dev);
+
+ spi_bitbang_stop(&sp->bitbang);
+ spi_master_put(sp->bitbang.master);
+
+ return 0;
+}
+
+/* all gpio should be held over suspend/resume, so we should
+ * not need to deal with this
+*/
+
+#define s3c2410_spigpio_suspend NULL
+#define s3c2410_spigpio_resume NULL
+
+
+static struct platform_driver s3c2410_spigpio_drv = {
+ .probe = s3c2410_spigpio_probe,
+ .remove = s3c2410_spigpio_remove,
+ .suspend = s3c2410_spigpio_suspend,
+ .resume = s3c2410_spigpio_resume,
+ .driver = {
+ .name = "s3c24xx-spi-gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s3c2410_spigpio_init(void)
+{
+ return platform_driver_register(&s3c2410_spigpio_drv);
+}
+
+static void __exit s3c2410_spigpio_exit(void)
+{
+ platform_driver_unregister(&s3c2410_spigpio_drv);
+}
+
+module_init(s3c2410_spigpio_init);
+module_exit(s3c2410_spigpio_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 6dd6666..c4670e1 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -317,6 +317,7 @@
}
schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 3d04b2d..789450b 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -214,10 +214,13 @@
*/
int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
- u32 *palette = fbdev->regs->lcd_pallettebase;
+ struct au1100fb_device *fbdev;
+ u32 *palette;
u32 value;
+ fbdev = to_au1100fb_device(fbi);
+ palette = fbdev->regs->lcd_pallettebase;
+
if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
return -EINVAL;
@@ -316,9 +319,11 @@
*/
int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ struct au1100fb_device *fbdev;
int dy;
+ fbdev = to_au1100fb_device(fbi);
+
print_dbg("fb_pan_display %p %p", var, fbi);
if (!var || !fbdev) {
@@ -382,10 +387,12 @@
*/
int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
{
- struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+ struct au1100fb_device *fbdev;
unsigned int len;
unsigned long start=0, off;
+ fbdev = to_au1100fb_device(fbi);
+
if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
return -EINVAL;
}
@@ -467,7 +474,7 @@
if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
DRIVER_NAME)) {
- print_err("fail to lock memory region at 0x%08x",
+ print_err("fail to lock memory region at 0x%08lx",
au1100fb_fix.mmio_start);
return -EBUSY;
}
@@ -595,13 +602,13 @@
return 0;
}
-int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+int au1100fb_drv_suspend(struct device *dev, pm_message_t state)
{
/* TODO */
return 0;
}
-int au1100fb_drv_resume(struct device *dev, u32 level)
+int au1100fb_drv_resume(struct device *dev)
{
/* TODO */
return 0;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index ca020719..953eb8c 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2631,7 +2631,7 @@
scr_memcpyw((u16 *) q, (u16 *) p,
vc->vc_size_row);
}
- softback_in = p;
+ softback_in = softback_curr = p;
update_region(vc, vc->vc_origin,
logo_lines * vc->vc_cols);
}
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 788297e..44aa2ff 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -76,8 +76,8 @@
*
* Experiment with v_offset to find out which works best for you.
*/
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset __initdata = 0;
+static u32 v_offset_default __devinitdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset __devinitdata;
static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
static int __devinit i810fb_init_pci (struct pci_dev *dev,
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c
index 8073a73..440272a 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/matrox/g450_pll.c
@@ -316,14 +316,24 @@
case M_PIXEL_PLL_B:
case M_PIXEL_PLL_C:
{
- u_int8_t tmp;
+ u_int8_t tmp, xpwrctrl;
unsigned long flags;
matroxfb_DAC_lock_irqsave(flags);
+
+ xpwrctrl = matroxfb_DAC_in(PMINFO M1064_XPWRCTRL);
+ matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl & ~M1064_XPWRCTRL_PANELPDN);
+ mga_outb(M_SEQ_INDEX, M_SEQ1);
+ mga_outb(M_SEQ_DATA, mga_inb(M_SEQ_DATA) | M_SEQ1_SCROFF);
tmp = matroxfb_DAC_in(PMINFO M1064_XPIXCLKCTRL);
+ tmp |= M1064_XPIXCLKCTRL_DIS;
if (!(tmp & M1064_XPIXCLKCTRL_PLL_UP)) {
- matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp | M1064_XPIXCLKCTRL_PLL_UP);
+ tmp |= M1064_XPIXCLKCTRL_PLL_UP;
}
+ matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
+ matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
+ matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
+
matroxfb_DAC_unlock_irqrestore(flags);
}
{
@@ -418,6 +428,15 @@
frequency to higher - with <= lowest wins, while
with < highest one wins */
if (delta <= deltaarray[idx-1]) {
+ /* all else being equal except VCO,
+ * choose VCO not near (within 1/16th or so) VCOmin
+ * (freqs near VCOmin aren't as stable)
+ */
+ if (delta == deltaarray[idx-1]
+ && vco != g450_mnp2vco(PMINFO mnparray[idx-1])
+ && vco < (pi->vcomin * 17 / 16)) {
+ break;
+ }
mnparray[idx] = mnparray[idx-1];
deltaarray[idx] = deltaarray[idx-1];
} else {
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index 2e7238a..56513a5 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -40,6 +40,7 @@
#define M1064_XCURCOL1RED 0x0C
#define M1064_XCURCOL1GREEN 0x0D
#define M1064_XCURCOL1BLUE 0x0E
+#define M1064_XDVICLKCTRL 0x0F
#define M1064_XCURCOL2RED 0x10
#define M1064_XCURCOL2GREEN 0x11
#define M1064_XCURCOL2BLUE 0x12
@@ -144,6 +145,7 @@
#define M1064_XVIDPLLN 0x8F
#define M1064_XPWRCTRL 0xA0
+#define M1064_XPWRCTRL_PANELPDN 0x04
#define M1064_XPANMODE 0xA2
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index 3a3e180..b717371 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -672,6 +672,8 @@
#define M_SEQ_INDEX 0x1FC4
#define M_SEQ_DATA 0x1FC5
+#define M_SEQ1 0x01
+#define M_SEQ1_SCROFF 0x20
#define M_MISC_REG_READ 0x1FCC
diff --git a/drivers/video/maxinefb.c b/drivers/video/maxinefb.c
index 743e7ad..f85421b 100644
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/maxinefb.c
@@ -55,7 +55,7 @@
};
static struct fb_fix_screeninfo maxinefb_fix = {
- .id = "Maxine onboard graphics 1024x768x8",
+ .id = "Maxine",
.smem_len = (1024*768),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
@@ -107,8 +107,6 @@
static struct fb_ops maxinefb_ops = {
.owner = THIS_MODULE,
- .fb_get_fix = gen_get_fix,
- .fb_get_var = gen_get_var,
.fb_setcolreg = maxinefb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index d4c2d63..a42143c 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -416,10 +416,9 @@
return retval;
}
- retval = -EIO;
bh = affs_bread(sb, old_dentry->d_inode->i_ino);
if (!bh)
- goto done;
+ return -EIO;
/* Remove header from its parent directory. */
affs_lock_dir(old_dir);
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 69f44dc..b1c902e 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -428,7 +428,6 @@
loff_t fpos;
unsigned long start_code, end_code;
int ret;
- int exec_fileno;
hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */
inode = bprm->file->f_dentry->d_inode;
@@ -502,21 +501,12 @@
goto err;
}
- /* check file descriptor */
- exec_fileno = get_unused_fd();
- if (exec_fileno < 0) {
- ret = -EMFILE;
- goto err;
- }
- get_file(bprm->file);
- fd_install(exec_fileno, bprm->file);
-
/* Flush all traces of the currently running executable */
if (id == 0) {
result = flush_old_exec(bprm);
if (result) {
ret = result;
- goto err_close;
+ goto err;
}
/* OK, This is the point of no return */
@@ -548,7 +538,7 @@
textpos = (unsigned long) -ENOMEM;
printk("Unable to mmap process text, errno %d\n", (int)-textpos);
ret = textpos;
- goto err_close;
+ goto err;
}
down_write(¤t->mm->mmap_sem);
@@ -564,7 +554,7 @@
(int)-datapos);
do_munmap(current->mm, textpos, text_len);
ret = realdatastart;
- goto err_close;
+ goto err;
}
datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
@@ -587,7 +577,7 @@
do_munmap(current->mm, textpos, text_len);
do_munmap(current->mm, realdatastart, data_len + extra);
ret = result;
- goto err_close;
+ goto err;
}
reloc = (unsigned long *) (datapos+(ntohl(hdr->reloc_start)-text_len));
@@ -606,7 +596,7 @@
printk("Unable to allocate RAM for process text/data, errno %d\n",
(int)-textpos);
ret = textpos;
- goto err_close;
+ goto err;
}
realdatastart = textpos + ntohl(hdr->data_start);
@@ -652,7 +642,7 @@
do_munmap(current->mm, textpos, text_len + data_len + extra +
MAX_SHARED_LIBS * sizeof(unsigned long));
ret = result;
- goto err_close;
+ goto err;
}
}
@@ -717,7 +707,7 @@
addr = calc_reloc(*rp, libinfo, id, 0);
if (addr == RELOC_FAILED) {
ret = -ENOEXEC;
- goto err_close;
+ goto err;
}
*rp = addr;
}
@@ -747,7 +737,7 @@
rp = (unsigned long *) calc_reloc(addr, libinfo, id, 1);
if (rp == (unsigned long *)RELOC_FAILED) {
ret = -ENOEXEC;
- goto err_close;
+ goto err;
}
/* Get the pointer's value. */
@@ -762,7 +752,7 @@
addr = calc_reloc(addr, libinfo, id, 0);
if (addr == RELOC_FAILED) {
ret = -ENOEXEC;
- goto err_close;
+ goto err;
}
/* Write back the relocated pointer. */
@@ -783,8 +773,6 @@
stack_len);
return 0;
-err_close:
- sys_close(exec_fileno);
err:
return ret;
}
diff --git a/fs/bio.c b/fs/bio.c
index eb8fbc5..098c12b 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1116,6 +1116,9 @@
bp->bio1.bi_io_vec = &bp->bv1;
bp->bio2.bi_io_vec = &bp->bv2;
+ bp->bio1.bi_max_vecs = 1;
+ bp->bio2.bi_max_vecs = 1;
+
bp->bio1.bi_end_io = bio_pair_end_1;
bp->bio2.bi_end_io = bio_pair_end_2;
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 1a27ecb..7271bb0 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,10 @@
+Version 1.43
+------------
+POSIX locking to servers which support CIFS POSIX Extensions
+(disabled by default controlled by proc/fs/cifs/Experimental).
+Handle conversion of long share names (especially Asian languages)
+to Unicode during mount.
+
Version 1.42
------------
Fix slow oplock break when mounted to different servers at the same time and
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 4e829dc..c98755d 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -99,5 +99,5 @@
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
extern int cifs_ioctl (struct inode * inode, struct file * filep,
unsigned int command, unsigned long arg);
-#define CIFS_VERSION "1.42"
+#define CIFS_VERSION "1.43"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 2879ba3..310ea2f 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -267,7 +267,7 @@
const int waitFlag);
extern int CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
const __u16 smb_file_id, const int get_flag,
- const __u64 len, const __u64 offset,
+ const __u64 len, struct file_lock *,
const __u16 lock_type, const int waitFlag);
extern int CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon);
extern int CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index fd36892..925881e 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1355,7 +1355,8 @@
int
CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
const __u16 smb_file_id, const int get_flag, const __u64 len,
- const __u64 lkoffset, const __u16 lock_type, const int waitFlag)
+ struct file_lock *pLockData, const __u16 lock_type,
+ const int waitFlag)
{
struct smb_com_transaction2_sfi_req *pSMB = NULL;
struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
@@ -1366,6 +1367,10 @@
__u16 params, param_offset, offset, byte_count, count;
cFYI(1, ("Posix Lock"));
+
+ if(pLockData == NULL)
+ return EINVAL;
+
rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
if (rc)
@@ -1404,10 +1409,10 @@
parm_data->lock_type = cpu_to_le16(lock_type);
if(waitFlag)
- parm_data->lock_flags = 1;
+ parm_data->lock_flags = cpu_to_le16(1);
parm_data->pid = cpu_to_le32(current->tgid);
- parm_data->start = lkoffset;
- parm_data->length = len; /* normalize negative numbers */
+ parm_data->start = cpu_to_le64(pLockData->fl_start);
+ parm_data->length = cpu_to_le64(len); /* normalize negative numbers */
pSMB->DataOffset = cpu_to_le16(offset);
pSMB->Fid = smb_file_id;
@@ -1419,8 +1424,33 @@
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
if (rc) {
cFYI(1, ("Send error in Posix Lock = %d", rc));
- }
+ } else if (get_flag) {
+ /* lock structure can be returned on get */
+ __u16 data_offset;
+ __u16 data_count;
+ rc = validate_t2((struct smb_t2_rsp *)pSMBr);
+ if (rc || (pSMBr->ByteCount < sizeof(struct cifs_posix_lock))) {
+ rc = -EIO; /* bad smb */
+ goto plk_err_exit;
+ }
+ if(pLockData == NULL) {
+ rc = -EINVAL;
+ goto plk_err_exit;
+ }
+ data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
+ data_count = le16_to_cpu(pSMBr->t2.DataCount);
+ if(data_count < sizeof(struct cifs_posix_lock)) {
+ rc = -EIO;
+ goto plk_err_exit;
+ }
+ parm_data = (struct cifs_posix_lock *)
+ ((char *)&pSMBr->hdr.Protocol + data_offset);
+ if(parm_data->lock_type == cpu_to_le16(CIFS_UNLCK))
+ pLockData->fl_type = F_UNLCK;
+ }
+
+plk_err_exit:
if (pSMB)
cifs_small_buf_release(pSMB);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index d2ec806..bae1479 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2148,6 +2148,8 @@
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(2 * (len + 1), GFP_KERNEL);
if(ses->serverOS == NULL)
goto sesssetup_nomem;
@@ -2160,6 +2162,8 @@
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *)bcc_ptr,
remaining_words-1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(2 * (len + 1),GFP_KERNEL);
if(ses->serverNOS == NULL)
goto sesssetup_nomem;
@@ -2177,6 +2181,8 @@
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2*(len+1),GFP_KERNEL);
if(ses->serverDomain == NULL)
@@ -2187,15 +2193,22 @@
ses->serverDomain[2*len] = 0;
ses->serverDomain[1+(2*len)] = 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2, GFP_KERNEL);
+ }
} else { /* no room so create dummy domain and NOS string */
/* if these kcallocs fail not much we
can do, but better to not fail the
sesssetup itself */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2, GFP_KERNEL);
}
@@ -2204,6 +2217,8 @@
if (((long) bcc_ptr + len) - (long)
pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(len + 1,GFP_KERNEL);
if(ses->serverOS == NULL)
goto sesssetup_nomem;
@@ -2214,6 +2229,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(len + 1,GFP_KERNEL);
if(ses->serverNOS == NULL)
goto sesssetup_nomem;
@@ -2223,6 +2240,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(len + 1,GFP_KERNEL);
if(ses->serverDomain == NULL)
goto sesssetup_nomem;
@@ -2427,6 +2446,8 @@
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
@@ -2441,6 +2462,8 @@
len = UniStrnlen((wchar_t *)bcc_ptr,
remaining_words
- 1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2 * (len + 1),
GFP_KERNEL);
@@ -2454,7 +2477,9 @@
remaining_words -= len + 1;
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+ /* last string not null terminated (e.g.Windows XP/2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2*(len+1),GFP_KERNEL);
cifs_strfromUCS_le(ses->serverDomain,
(__le16 *)bcc_ptr,
@@ -2463,11 +2488,18 @@
ses->serverDomain[2*len] = 0;
ses->serverDomain[1+(2*len)] = 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2,GFP_KERNEL);
- } else { /* no room so create dummy domain and NOS string */
+ }
+ } else {/* no room use dummy domain&NOS */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(2, GFP_KERNEL);
}
} else { /* ASCII */
@@ -2476,6 +2508,8 @@
if (((long) bcc_ptr + len) - (long)
pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
strncpy(ses->serverOS, bcc_ptr, len);
@@ -2484,6 +2518,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(len + 1,GFP_KERNEL);
strncpy(ses->serverNOS, bcc_ptr, len);
bcc_ptr += len;
@@ -2491,6 +2527,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(len + 1, GFP_KERNEL);
strncpy(ses->serverDomain, bcc_ptr, len);
bcc_ptr += len;
@@ -2728,6 +2766,8 @@
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
@@ -2743,6 +2783,8 @@
bcc_ptr,
remaining_words
- 1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2 * (len + 1),
GFP_KERNEL);
@@ -2760,6 +2802,8 @@
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2 *
(len +
@@ -2777,13 +2821,20 @@
[1 + (2 * len)]
= 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2,
GFP_KERNEL);
+ }
} else { /* no room so create dummy domain and NOS string */
+ if(ses->serverDomain);
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2, GFP_KERNEL);
}
@@ -2792,6 +2843,8 @@
if (((long) bcc_ptr + len) - (long)
pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(len + 1,
GFP_KERNEL);
@@ -2803,6 +2856,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(len + 1,
GFP_KERNEL);
@@ -2812,6 +2867,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(len + 1,
GFP_KERNEL);
@@ -3116,6 +3173,8 @@
/* We look for obvious messed up bcc or strings in response so we do not go off
the end since (at least) WIN2K and Windows XP have a major bug in not null
terminating last Unicode string in response */
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS =
kzalloc(2 * (len + 1), GFP_KERNEL);
cifs_strfromUCS_le(ses->serverOS,
@@ -3131,6 +3190,8 @@
bcc_ptr,
remaining_words
- 1);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS =
kzalloc(2 * (len + 1),
GFP_KERNEL);
@@ -3147,6 +3208,8 @@
if (remaining_words > 0) {
len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
/* last string not always null terminated (e.g. for Windows XP & 2000) */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain =
kzalloc(2 *
(len +
@@ -3172,10 +3235,17 @@
len)]
= 0;
} /* else no more room so create dummy domain string */
- else
+ else {
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2,GFP_KERNEL);
+ }
} else { /* no room so create dummy domain and NOS string */
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(2, GFP_KERNEL);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(2, GFP_KERNEL);
}
} else { /* ASCII */
@@ -3183,6 +3253,8 @@
if (((long) bcc_ptr + len) -
(long) pByteArea(smb_buffer_response)
<= BCC(smb_buffer_response)) {
+ if(ses->serverOS)
+ kfree(ses->serverOS);
ses->serverOS = kzalloc(len + 1,GFP_KERNEL);
strncpy(ses->serverOS,bcc_ptr, len);
@@ -3191,6 +3263,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverNOS)
+ kfree(ses->serverNOS);
ses->serverNOS = kzalloc(len+1,GFP_KERNEL);
strncpy(ses->serverNOS, bcc_ptr, len);
bcc_ptr += len;
@@ -3198,6 +3272,8 @@
bcc_ptr++;
len = strnlen(bcc_ptr, 1024);
+ if(ses->serverDomain)
+ kfree(ses->serverDomain);
ses->serverDomain = kzalloc(len+1,GFP_KERNEL);
strncpy(ses->serverDomain, bcc_ptr, len);
bcc_ptr += len;
@@ -3282,7 +3358,8 @@
bcc_ptr++; /* align */
}
- if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ if(ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
if (ses->capabilities & CAP_STATUS32) {
@@ -3294,8 +3371,10 @@
if (ses->capabilities & CAP_UNICODE) {
smb_buffer->Flags2 |= SMBFLG2_UNICODE;
length =
- cifs_strtoUCS((__le16 *) bcc_ptr, tree, 100, nls_codepage);
- bcc_ptr += 2 * length; /* convert num of 16 bit words to bytes */
+ cifs_strtoUCS((__le16 *) bcc_ptr, tree,
+ 6 /* max utf8 char length in bytes */ *
+ (/* server len*/ + 256 /* share len */), nls_codepage);
+ bcc_ptr += 2 * length; /* convert num 16 bit words to bytes */
bcc_ptr += 2; /* skip trailing null */
} else { /* ASCII */
strcpy(bcc_ptr, tree);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index e152bf6..e2b4ce1 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -84,6 +84,8 @@
return FILE_OVERWRITE_IF;
else if ((flags & O_CREAT) == O_CREAT)
return FILE_OPEN_IF;
+ else if ((flags & O_TRUNC) == O_TRUNC)
+ return FILE_OVERWRITE;
else
return FILE_OPEN;
}
@@ -656,7 +658,7 @@
else
posix_lock_type = CIFS_WRLCK;
rc = CIFSSMBPosixLock(xid, pTcon, netfid, 1 /* get */,
- length, pfLock->fl_start,
+ length, pfLock,
posix_lock_type, wait_flag);
FreeXid(xid);
return rc;
@@ -704,7 +706,7 @@
return -EOPNOTSUPP;
}
rc = CIFSSMBPosixLock(xid, pTcon, netfid, 0 /* set */,
- length, pfLock->fl_start,
+ length, pfLock,
posix_lock_type, wait_flag);
} else
rc = CIFSSMBLock(xid, pTcon, netfid, length, pfLock->fl_start,
@@ -904,8 +906,10 @@
if (rc != 0)
break;
}
- if(experimEnabled || (pTcon->ses->server->secMode &
- (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) == 0) {
+ if(experimEnabled || (pTcon->ses->server &&
+ ((pTcon->ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ == 0))) {
struct kvec iov[2];
unsigned int len;
diff --git a/fs/compat.c b/fs/compat.c
index 01f39f8..b1f6478 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -2030,109 +2030,115 @@
struct knfsd_fh cr32_getfs;
};
-static int compat_nfs_svc_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_svc_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
-
- err = access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port);
- err |= __get_user(karg->ca_svc.svc_nthreads, &arg->ca32_svc.svc32_nthreads);
- return (err) ? -EFAULT : 0;
+ if (!access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port) ||
+ __get_user(karg->ca_svc.svc_nthreads,
+ &arg->ca32_svc.svc32_nthreads))
+ return -EFAULT;
+ return 0;
}
-static int compat_nfs_clnt_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_clnt_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
+ if (!access_ok(VERIFY_READ, &arg->ca32_client,
+ sizeof(arg->ca32_client)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_client.cl_ident[0],
+ &arg->ca32_client.cl32_ident[0],
+ NFSCLNT_IDMAX) ||
+ __get_user(karg->ca_client.cl_naddr,
+ &arg->ca32_client.cl32_naddr) ||
+ __copy_from_user(&karg->ca_client.cl_addrlist[0],
+ &arg->ca32_client.cl32_addrlist[0],
+ (sizeof(struct in_addr) * NFSCLNT_ADDRMAX)) ||
+ __get_user(karg->ca_client.cl_fhkeytype,
+ &arg->ca32_client.cl32_fhkeytype) ||
+ __get_user(karg->ca_client.cl_fhkeylen,
+ &arg->ca32_client.cl32_fhkeylen) ||
+ __copy_from_user(&karg->ca_client.cl_fhkey[0],
+ &arg->ca32_client.cl32_fhkey[0],
+ NFSCLNT_KEYMAX))
+ return -EFAULT;
- err = access_ok(VERIFY_READ, &arg->ca32_client, sizeof(arg->ca32_client));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_client.cl_ident[0],
- &arg->ca32_client.cl32_ident[0],
- NFSCLNT_IDMAX);
- err |= __get_user(karg->ca_client.cl_naddr, &arg->ca32_client.cl32_naddr);
- err |= __copy_from_user(&karg->ca_client.cl_addrlist[0],
- &arg->ca32_client.cl32_addrlist[0],
- (sizeof(struct in_addr) * NFSCLNT_ADDRMAX));
- err |= __get_user(karg->ca_client.cl_fhkeytype,
- &arg->ca32_client.cl32_fhkeytype);
- err |= __get_user(karg->ca_client.cl_fhkeylen,
- &arg->ca32_client.cl32_fhkeylen);
- err |= __copy_from_user(&karg->ca_client.cl_fhkey[0],
- &arg->ca32_client.cl32_fhkey[0],
- NFSCLNT_KEYMAX);
-
- return (err) ? -EFAULT : 0;
+ return 0;
}
-static int compat_nfs_exp_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_exp_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
-
- err = access_ok(VERIFY_READ, &arg->ca32_export, sizeof(arg->ca32_export));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_export.ex_client[0],
- &arg->ca32_export.ex32_client[0],
- NFSCLNT_IDMAX);
- err |= __copy_from_user(&karg->ca_export.ex_path[0],
- &arg->ca32_export.ex32_path[0],
- NFS_MAXPATHLEN);
- err |= __get_user(karg->ca_export.ex_dev,
- &arg->ca32_export.ex32_dev);
- err |= __get_user(karg->ca_export.ex_ino,
- &arg->ca32_export.ex32_ino);
- err |= __get_user(karg->ca_export.ex_flags,
- &arg->ca32_export.ex32_flags);
- err |= __get_user(karg->ca_export.ex_anon_uid,
- &arg->ca32_export.ex32_anon_uid);
- err |= __get_user(karg->ca_export.ex_anon_gid,
- &arg->ca32_export.ex32_anon_gid);
+ if (!access_ok(VERIFY_READ, &arg->ca32_export,
+ sizeof(arg->ca32_export)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_export.ex_client[0],
+ &arg->ca32_export.ex32_client[0],
+ NFSCLNT_IDMAX) ||
+ __copy_from_user(&karg->ca_export.ex_path[0],
+ &arg->ca32_export.ex32_path[0],
+ NFS_MAXPATHLEN) ||
+ __get_user(karg->ca_export.ex_dev,
+ &arg->ca32_export.ex32_dev) ||
+ __get_user(karg->ca_export.ex_ino,
+ &arg->ca32_export.ex32_ino) ||
+ __get_user(karg->ca_export.ex_flags,
+ &arg->ca32_export.ex32_flags) ||
+ __get_user(karg->ca_export.ex_anon_uid,
+ &arg->ca32_export.ex32_anon_uid) ||
+ __get_user(karg->ca_export.ex_anon_gid,
+ &arg->ca32_export.ex32_anon_gid))
+ return -EFAULT;
SET_UID(karg->ca_export.ex_anon_uid, karg->ca_export.ex_anon_uid);
SET_GID(karg->ca_export.ex_anon_gid, karg->ca_export.ex_anon_gid);
- return (err) ? -EFAULT : 0;
+ return 0;
}
-static int compat_nfs_getfd_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_getfd_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
+ if (!access_ok(VERIFY_READ, &arg->ca32_getfd,
+ sizeof(arg->ca32_getfd)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_getfd.gd_addr,
+ &arg->ca32_getfd.gd32_addr,
+ (sizeof(struct sockaddr))) ||
+ __copy_from_user(&karg->ca_getfd.gd_path,
+ &arg->ca32_getfd.gd32_path,
+ (NFS_MAXPATHLEN+1)) ||
+ __get_user(karg->ca_getfd.gd_version,
+ &arg->ca32_getfd.gd32_version))
+ return -EFAULT;
- err = access_ok(VERIFY_READ, &arg->ca32_getfd, sizeof(arg->ca32_getfd));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_getfd.gd_addr,
- &arg->ca32_getfd.gd32_addr,
- (sizeof(struct sockaddr)));
- err |= __copy_from_user(&karg->ca_getfd.gd_path,
- &arg->ca32_getfd.gd32_path,
- (NFS_MAXPATHLEN+1));
- err |= __get_user(karg->ca_getfd.gd_version,
- &arg->ca32_getfd.gd32_version);
-
- return (err) ? -EFAULT : 0;
+ return 0;
}
-static int compat_nfs_getfs_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_getfs_trans(struct nfsctl_arg *karg,
+ struct compat_nfsctl_arg __user *arg)
{
- int err;
+ if (!access_ok(VERIFY_READ,&arg->ca32_getfs,sizeof(arg->ca32_getfs)) ||
+ get_user(karg->ca_version, &arg->ca32_version) ||
+ __copy_from_user(&karg->ca_getfs.gd_addr,
+ &arg->ca32_getfs.gd32_addr,
+ (sizeof(struct sockaddr))) ||
+ __copy_from_user(&karg->ca_getfs.gd_path,
+ &arg->ca32_getfs.gd32_path,
+ (NFS_MAXPATHLEN+1)) ||
+ __get_user(karg->ca_getfs.gd_maxlen,
+ &arg->ca32_getfs.gd32_maxlen))
+ return -EFAULT;
- err = access_ok(VERIFY_READ, &arg->ca32_getfs, sizeof(arg->ca32_getfs));
- err |= get_user(karg->ca_version, &arg->ca32_version);
- err |= __copy_from_user(&karg->ca_getfs.gd_addr,
- &arg->ca32_getfs.gd32_addr,
- (sizeof(struct sockaddr)));
- err |= __copy_from_user(&karg->ca_getfs.gd_path,
- &arg->ca32_getfs.gd32_path,
- (NFS_MAXPATHLEN+1));
- err |= __get_user(karg->ca_getfs.gd_maxlen,
- &arg->ca32_getfs.gd32_maxlen);
-
- return (err) ? -EFAULT : 0;
+ return 0;
}
/* This really doesn't need translations, we are only passing
* back a union which contains opaque nfs file handle data.
*/
-static int compat_nfs_getfh_res_trans(union nfsctl_res *kres, union compat_nfsctl_res __user *res)
+static int compat_nfs_getfh_res_trans(union nfsctl_res *kres,
+ union compat_nfsctl_res __user *res)
{
int err;
@@ -2141,8 +2147,9 @@
return (err) ? -EFAULT : 0;
}
-asmlinkage long compat_sys_nfsservctl(int cmd, struct compat_nfsctl_arg __user *arg,
- union compat_nfsctl_res __user *res)
+asmlinkage long compat_sys_nfsservctl(int cmd,
+ struct compat_nfsctl_arg __user *arg,
+ union compat_nfsctl_res __user *res)
{
struct nfsctl_arg *karg;
union nfsctl_res *kres;
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index b06b54f..4c39009 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -102,7 +102,7 @@
if (acceptable(context, result))
return result;
if (S_ISDIR(result->d_inode->i_mode)) {
- /* there is no other dentry, so fail */
+ err = -EACCES;
goto err_result;
}
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 8aac533..34b39e9 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -767,7 +767,6 @@
if (input->group != sbi->s_groups_count) {
ext3_warning(sb, __FUNCTION__,
"multiple resizers run on filesystem!");
- unlock_super(sb);
err = -EBUSY;
goto exit_journal;
}
diff --git a/fs/inotify.c b/fs/inotify.c
index 1f50302..732ec4b 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -848,7 +848,11 @@
inode = watch->inode;
mutex_lock(&inode->inotify_mutex);
mutex_lock(&dev->mutex);
- remove_watch_no_event(watch, dev);
+
+ /* make sure we didn't race with another list removal */
+ if (likely(idr_find(&dev->idr, watch->wd)))
+ remove_watch_no_event(watch, dev);
+
mutex_unlock(&dev->mutex);
mutex_unlock(&inode->inotify_mutex);
put_inotify_watch(watch);
@@ -890,8 +894,7 @@
mutex_lock(&dev->mutex);
/* make sure that we did not race */
- watch = idr_find(&dev->idr, wd);
- if (likely(watch))
+ if (likely(idr_find(&dev->idr, wd) == watch))
remove_watch(watch, dev);
mutex_unlock(&dev->mutex);
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index f28696f..2b220dd 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -542,7 +542,7 @@
static int metapage_releasepage(struct page *page, gfp_t gfp_mask)
{
struct metapage *mp;
- int busy = 0;
+ int ret = 1;
unsigned int offset;
for (offset = 0; offset < PAGE_CACHE_SIZE; offset += PSIZE) {
@@ -552,30 +552,20 @@
continue;
jfs_info("metapage_releasepage: mp = 0x%p", mp);
- if (mp->count || mp->nohomeok) {
+ if (mp->count || mp->nohomeok ||
+ test_bit(META_dirty, &mp->flag)) {
jfs_info("count = %ld, nohomeok = %d", mp->count,
mp->nohomeok);
- busy = 1;
+ ret = 0;
continue;
}
- wait_on_page_writeback(page);
- //WARN_ON(test_bit(META_dirty, &mp->flag));
- if (test_bit(META_dirty, &mp->flag)) {
- dump_mem("dirty mp in metapage_releasepage", mp,
- sizeof(struct metapage));
- dump_mem("page", page, sizeof(struct page));
- dump_stack();
- }
if (mp->lsn)
remove_from_logsync(mp);
remove_metapage(page, mp);
INCREMENT(mpStat.pagefree);
free_metapage(mp);
}
- if (busy)
- return -1;
-
- return 0;
+ return ret;
}
static void metapage_invalidatepage(struct page *page, unsigned long offset)
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 4e05781..3eec300 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -1066,9 +1066,11 @@
rv = nfserr_perm;
else if (IS_ERR(exp))
rv = nfserrno(PTR_ERR(exp));
- else
+ else {
rv = fh_compose(fhp, exp,
fsid_key->ek_dentry, NULL);
+ exp_put(exp);
+ }
cache_put(&fsid_key->h, &svc_expkey_cache);
return rv;
}
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 6aa92d0..1d65f13 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1922,11 +1922,10 @@
value = kmalloc(size, GFP_KERNEL);
if (!value)
return -ENOMEM;
- size = posix_acl_to_xattr(acl, value, size);
- if (size < 0) {
- error = size;
+ error = posix_acl_to_xattr(acl, value, size);
+ if (error < 0)
goto getout;
- }
+ size = error;
} else
size = 0;
diff --git a/include/asm-alpha/termbits.h b/include/asm-alpha/termbits.h
index f4837fa..5541101 100644
--- a/include/asm-alpha/termbits.h
+++ b/include/asm-alpha/termbits.h
@@ -148,6 +148,7 @@
#define HUPCL 00040000
#define CLOCAL 00100000
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
/* c_lflag bits */
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h
index 6e19f46..c85fc06 100644
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ b/include/asm-arm/arch-ixp23xx/memory.h
@@ -49,7 +49,7 @@
{
extern unsigned int processor_id;
- if (((processor_id & 15) >= 2) || machine_is_roadrunner())
+ if (((processor_id & 15) >= 4) || machine_is_roadrunner())
return 1;
return 0;
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
index 1e70908..915590c3 100644
--- a/include/asm-arm/arch-pxa/pxa2xx_spi.h
+++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h
@@ -27,13 +27,16 @@
#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (2712)
#elif defined(CONFIG_PXA27x)
#define CLOCK_SPEED_HZ 13000000
#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (769)
#endif
+#define SSP_TIMEOUT(x) ((x*10000)/SSP_TIMEOUT_SCALE)
#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
new file mode 100644
index 0000000..258c00b
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi-gpio.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info;
+struct spi_board_info;
+
+struct s3c2410_spigpio_info {
+ unsigned long pin_clk;
+ unsigned long pin_mosi;
+ unsigned long pin_miso;
+
+ unsigned long board_size;
+ struct spi_board_info *board_info;
+
+ void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
new file mode 100644
index 0000000..4029a1a
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info;
+struct spi_board_info;
+
+struct s3c2410_spi_info {
+ unsigned long pin_cs; /* simple gpio cs */
+
+ unsigned long board_size;
+ struct spi_board_info *board_info;
+
+ void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 43ad4e5..406ca97 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,6 +142,9 @@
: "cc");
}
+/* write_can_lock - would write_trylock() succeed? */
+#define __raw_write_can_lock(x) ((x)->lock == 0x80000000)
+
/*
* Read locks are a bit more hairy:
* - Exclusively load the lock value.
@@ -198,4 +201,7 @@
#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
+/* read_can_lock - would read_trylock() succeed? */
+#define __raw_read_can_lock(x) ((x)->lock < 0x80000000)
+
#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 95b3abf..7c9568d 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -127,6 +127,12 @@
}
#endif
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
+#define cpu_is_xscale() 0
+#else
+#define cpu_is_xscale() 1
+#endif
+
#define set_cr(x) \
__asm__ __volatile__( \
"mcr p15, 0, %0, c1, c0, 0 @ set CR" \
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 358e4d3..c2059a3 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -159,17 +159,8 @@
#define lazy_mmu_prot_update(pte) do { } while (0)
#endif
-#ifndef __HAVE_ARCH_MULTIPLE_ZERO_PAGE
+#ifndef __HAVE_ARCH_MOVE_PTE
#define move_pte(pte, prot, old_addr, new_addr) (pte)
-#else
-#define move_pte(pte, prot, old_addr, new_addr) \
-({ \
- pte_t newpte = (pte); \
- if (pte_present(pte) && pfn_valid(pte_pfn(pte)) && \
- pte_page(pte) == ZERO_PAGE(old_addr)) \
- newpte = mk_pte(ZERO_PAGE(new_addr), (prot)); \
- newpte; \
-})
#endif
/*
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index 818b9a9..dff2a0a 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -51,6 +51,7 @@
#define PRID_IMP_R4300 0x0b00
#define PRID_IMP_VR41XX 0x0c00
#define PRID_IMP_R12000 0x0e00
+#define PRID_IMP_R14000 0x0f00
#define PRID_IMP_R8000 0x1000
#define PRID_IMP_PR4450 0x1200
#define PRID_IMP_R4600 0x2000
@@ -87,6 +88,7 @@
#define PRID_IMP_24K 0x9300
#define PRID_IMP_34K 0x9500
#define PRID_IMP_24KE 0x9600
+#define PRID_IMP_74K 0x9700
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -196,7 +198,9 @@
#define CPU_34K 60
#define CPU_PR4450 61
#define CPU_SB1A 62
-#define CPU_LAST 62
+#define CPU_74K 63
+#define CPU_R14000 64
+#define CPU_LAST 64
/*
* ISA Level encodings
diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h
index a554089..12d118f 100644
--- a/include/asm-mips/futex.h
+++ b/include/asm-mips/futex.h
@@ -7,6 +7,7 @@
#include <linux/futex.h>
#include <asm/errno.h>
#include <asm/uaccess.h>
+#include <asm/war.h>
#ifdef CONFIG_SMP
#define __FUTEX_SMP_SYNC " sync \n"
@@ -16,30 +17,58 @@
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
{ \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set noat \n" \
- " .set mips3 \n" \
- "1: ll %1, (%3) # __futex_atomic_op1 \n" \
- " .set mips0 \n" \
- " " insn " \n" \
- " .set mips3 \n" \
- "2: sc $1, (%3) \n" \
- " beqzl $1, 1b \n" \
- __FUTEX_SMP_SYNC \
- "3: \n" \
- " .set pop \n" \
- " .set mips0 \n" \
- " .section .fixup,\"ax\" \n" \
- "4: li %0, %5 \n" \
- " j 2b \n" \
- " .previous \n" \
- " .section __ex_table,\"a\" \n" \
- " "__UA_ADDR "\t1b, 4b \n" \
- " "__UA_ADDR "\t2b, 4b \n" \
- " .previous \n" \
- : "=r" (ret), "=r" (oldval) \
- : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+ if (cpu_has_llsc && R10000_LLSC_WAR) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, (%3) # __futex_atomic_op \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, (%3) \n" \
+ " beqzl $1, 1b \n" \
+ __FUTEX_SMP_SYNC \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %5 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=r" (oldval) \
+ : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+ } else if (cpu_has_llsc) { \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set mips3 \n" \
+ "1: ll %1, (%3) # __futex_atomic_op \n" \
+ " .set mips0 \n" \
+ " " insn " \n" \
+ " .set mips3 \n" \
+ "2: sc $1, (%3) \n" \
+ " beqz $1, 1b \n" \
+ __FUTEX_SMP_SYNC \
+ "3: \n" \
+ " .set pop \n" \
+ " .set mips0 \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: li %0, %5 \n" \
+ " j 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "__UA_ADDR "\t1b, 4b \n" \
+ " "__UA_ADDR "\t2b, 4b \n" \
+ " .previous \n" \
+ : "=r" (ret), "=r" (oldval) \
+ : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \
+ } else \
+ ret = -ENOSYS; \
}
static inline int
@@ -102,7 +131,69 @@
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
- return -ENOSYS;
+ int retval;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ if (cpu_has_llsc && R10000_LLSC_WAR) {
+ __asm__ __volatile__(
+ "# futex_atomic_cmpxchg_inatomic \n"
+ " .set push \n"
+ " .set noat \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 \n"
+ " bne %0, %z3, 3f \n"
+ " .set mips0 \n"
+ " move $1, %z4 \n"
+ " .set mips3 \n"
+ "2: sc $1, %1 \n"
+ " beqzl $1, 1b \n"
+ __FUTEX_SMP_SYNC
+ "3: \n"
+ " .set pop \n"
+ " .section .fixup,\"ax\" \n"
+ "4: li %0, %5 \n"
+ " j 3b \n"
+ " .previous \n"
+ " .section __ex_table,\"a\" \n"
+ " "__UA_ADDR "\t1b, 4b \n"
+ " "__UA_ADDR "\t2b, 4b \n"
+ " .previous \n"
+ : "=&r" (retval), "=R" (*uaddr)
+ : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "memory");
+ } else if (cpu_has_llsc) {
+ __asm__ __volatile__(
+ "# futex_atomic_cmpxchg_inatomic \n"
+ " .set push \n"
+ " .set noat \n"
+ " .set mips3 \n"
+ "1: ll %0, %2 \n"
+ " bne %0, %z3, 3f \n"
+ " .set mips0 \n"
+ " move $1, %z4 \n"
+ " .set mips3 \n"
+ "2: sc $1, %1 \n"
+ " beqz $1, 1b \n"
+ __FUTEX_SMP_SYNC
+ "3: \n"
+ " .set pop \n"
+ " .section .fixup,\"ax\" \n"
+ "4: li %0, %5 \n"
+ " j 3b \n"
+ " .previous \n"
+ " .section __ex_table,\"a\" \n"
+ " "__UA_ADDR "\t1b, 4b \n"
+ " "__UA_ADDR "\t2b, 4b \n"
+ " .previous \n"
+ : "=&r" (retval), "=R" (*uaddr)
+ : "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+ : "memory");
+ } else
+ return -ENOSYS;
+
+ return retval;
}
#endif
diff --git a/include/asm-mips/inst.h b/include/asm-mips/inst.h
index e0745f4..1ed8d0f 100644
--- a/include/asm-mips/inst.h
+++ b/include/asm-mips/inst.h
@@ -6,6 +6,7 @@
* for more details.
*
* Copyright (C) 1996, 2000 by Ralf Baechle
+ * Copyright (C) 2006 by Thiemo Seufer
*/
#ifndef _ASM_INST_H
#define _ASM_INST_H
@@ -21,14 +22,14 @@
cop0_op, cop1_op, cop2_op, cop1x_op,
beql_op, bnel_op, blezl_op, bgtzl_op,
daddi_op, daddiu_op, ldl_op, ldr_op,
- major_1c_op, jalx_op, major_1e_op, major_1f_op,
+ spec2_op, jalx_op, mdmx_op, spec3_op,
lb_op, lh_op, lwl_op, lw_op,
lbu_op, lhu_op, lwr_op, lwu_op,
sb_op, sh_op, swl_op, sw_op,
sdl_op, sdr_op, swr_op, cache_op,
ll_op, lwc1_op, lwc2_op, pref_op,
lld_op, ldc1_op, ldc2_op, ld_op,
- sc_op, swc1_op, swc2_op, rdhwr_op,
+ sc_op, swc1_op, swc2_op, major_3b_op,
scd_op, sdc1_op, sdc2_op, sd_op
};
@@ -37,7 +38,7 @@
*/
enum spec_op {
sll_op, movc_op, srl_op, sra_op,
- sllv_op, srlv_op, srav_op, spec1_unused_op, /* Opcode 0x07 is unused */
+ sllv_op, pmon_op, srlv_op, srav_op,
jr_op, jalr_op, movz_op, movn_op,
syscall_op, break_op, spim_op, sync_op,
mfhi_op, mthi_op, mflo_op, mtlo_op,
@@ -55,6 +56,28 @@
};
/*
+ * func field of spec2 opcode.
+ */
+enum spec2_op {
+ madd_op, maddu_op, mul_op, spec2_3_unused_op,
+ msub_op, msubu_op, /* more unused ops */
+ clz_op = 0x20, clo_op,
+ dclz_op = 0x24, dclo_op,
+ sdbpp_op = 0x3f
+};
+
+/*
+ * func field of spec3 opcode.
+ */
+enum spec3_op {
+ ext_op, dextm_op, dextu_op, dext_op,
+ ins_op, dinsm_op, dinsu_op, dins_op,
+ bshfl_op = 0x20,
+ dbshfl_op = 0x24,
+ rdhwr_op = 0x3f
+};
+
+/*
* rt field of bcond opcodes.
*/
enum rt_op {
@@ -151,8 +174,8 @@
* func field for mad opcodes (MIPS IV).
*/
enum mad_func {
- madd_op = 0x08, msub_op = 0x0a,
- nmadd_op = 0x0c, nmsub_op = 0x0e
+ madd_fp_op = 0x08, msub_fp_op = 0x0a,
+ nmadd_fp_op = 0x0c, nmsub_fp_op = 0x0e
};
/*
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index a2ef579..5af7517 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -291,7 +291,7 @@
#define ST0_DL (_ULCAST_(1) << 24)
/*
- * Enable the MIPS DSP ASE
+ * Enable the MIPS MDMX and DSP ASEs
*/
#define ST0_MX 0x01000000
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index 702a28f..f80fe75 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -70,7 +70,15 @@
#define ZERO_PAGE(vaddr) \
(virt_to_page(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))
-#define __HAVE_ARCH_MULTIPLE_ZERO_PAGE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr) \
+({ \
+ pte_t newpte = (pte); \
+ if (pte_present(pte) && pfn_valid(pte_pfn(pte)) && \
+ pte_page(pte) == ZERO_PAGE(old_addr)) \
+ newpte = mk_pte(ZERO_PAGE(new_addr), (prot)); \
+ newpte; \
+})
extern void paging_init(void);
@@ -82,10 +90,11 @@
#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
#define pmd_page_kernel(pmd) pmd_val(pmd)
-#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
-#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
-
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+
+#define pte_none(pte) (!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
+#define pte_present(pte) ((pte).pte_low & _PAGE_PRESENT)
+
static inline void set_pte(pte_t *ptep, pte_t pte)
{
ptep->pte_high = pte.pte_high;
@@ -93,27 +102,35 @@
ptep->pte_low = pte.pte_low;
//printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
- if (pte_val(pte) & _PAGE_GLOBAL) {
+ if (pte.pte_low & _PAGE_GLOBAL) {
pte_t *buddy = ptep_buddy(ptep);
/*
* Make sure the buddy is global too (if it's !none,
* it better already be global)
*/
- if (pte_none(*buddy))
- buddy->pte_low |= _PAGE_GLOBAL;
+ if (pte_none(*buddy)) {
+ buddy->pte_low |= _PAGE_GLOBAL;
+ buddy->pte_high |= _PAGE_GLOBAL;
+ }
}
}
#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
+ pte_t null = __pte(0);
+
/* Preserve global status for the pair */
- if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
- set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
- else
- set_pte_at(mm, addr, ptep, __pte(0));
+ if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
+ null.pte_low = null.pte_high = _PAGE_GLOBAL;
+
+ set_pte_at(mm, addr, ptep, null);
}
#else
+
+#define pte_none(pte) (!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+
/*
* Certain architectures need to do special things when pte's
* within a page table are directly modified. Thus, the following
@@ -174,75 +191,76 @@
*/
static inline int pte_user(pte_t pte) { BUG(); return 0; }
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
-static inline int pte_read(pte_t pte) { return (pte).pte_low & _PAGE_READ; }
-static inline int pte_write(pte_t pte) { return (pte).pte_low & _PAGE_WRITE; }
-static inline int pte_dirty(pte_t pte) { return (pte).pte_low & _PAGE_MODIFIED; }
-static inline int pte_young(pte_t pte) { return (pte).pte_low & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte) { return (pte).pte_low & _PAGE_FILE; }
+static inline int pte_read(pte_t pte) { return pte.pte_low & _PAGE_READ; }
+static inline int pte_write(pte_t pte) { return pte.pte_low & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte) { return pte.pte_low & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte) { return pte.pte_low & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) { return pte.pte_low & _PAGE_FILE; }
+
static inline pte_t pte_wrprotect(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
- (pte).pte_high &= ~_PAGE_SILENT_WRITE;
+ pte.pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+ pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_rdprotect(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
- (pte).pte_high &= ~_PAGE_SILENT_READ;
+ pte.pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
+ pte.pte_high &= ~_PAGE_SILENT_READ;
return pte;
}
static inline pte_t pte_mkclean(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
- (pte).pte_high &= ~_PAGE_SILENT_WRITE;
+ pte.pte_low &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
+ pte.pte_high &= ~_PAGE_SILENT_WRITE;
return pte;
}
static inline pte_t pte_mkold(pte_t pte)
{
- (pte).pte_low &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
- (pte).pte_high &= ~_PAGE_SILENT_READ;
+ pte.pte_low &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+ pte.pte_high &= ~_PAGE_SILENT_READ;
return pte;
}
static inline pte_t pte_mkwrite(pte_t pte)
{
- (pte).pte_low |= _PAGE_WRITE;
- if ((pte).pte_low & _PAGE_MODIFIED) {
- (pte).pte_low |= _PAGE_SILENT_WRITE;
- (pte).pte_high |= _PAGE_SILENT_WRITE;
+ pte.pte_low |= _PAGE_WRITE;
+ if (pte.pte_low & _PAGE_MODIFIED) {
+ pte.pte_low |= _PAGE_SILENT_WRITE;
+ pte.pte_high |= _PAGE_SILENT_WRITE;
}
return pte;
}
static inline pte_t pte_mkread(pte_t pte)
{
- (pte).pte_low |= _PAGE_READ;
- if ((pte).pte_low & _PAGE_ACCESSED) {
- (pte).pte_low |= _PAGE_SILENT_READ;
- (pte).pte_high |= _PAGE_SILENT_READ;
+ pte.pte_low |= _PAGE_READ;
+ if (pte.pte_low & _PAGE_ACCESSED) {
+ pte.pte_low |= _PAGE_SILENT_READ;
+ pte.pte_high |= _PAGE_SILENT_READ;
}
return pte;
}
static inline pte_t pte_mkdirty(pte_t pte)
{
- (pte).pte_low |= _PAGE_MODIFIED;
- if ((pte).pte_low & _PAGE_WRITE) {
- (pte).pte_low |= _PAGE_SILENT_WRITE;
- (pte).pte_high |= _PAGE_SILENT_WRITE;
+ pte.pte_low |= _PAGE_MODIFIED;
+ if (pte.pte_low & _PAGE_WRITE) {
+ pte.pte_low |= _PAGE_SILENT_WRITE;
+ pte.pte_high |= _PAGE_SILENT_WRITE;
}
return pte;
}
static inline pte_t pte_mkyoung(pte_t pte)
{
- (pte).pte_low |= _PAGE_ACCESSED;
- if ((pte).pte_low & _PAGE_READ)
- (pte).pte_low |= _PAGE_SILENT_READ;
- (pte).pte_high |= _PAGE_SILENT_READ;
+ pte.pte_low |= _PAGE_ACCESSED;
+ if (pte.pte_low & _PAGE_READ)
+ pte.pte_low |= _PAGE_SILENT_READ;
+ pte.pte_high |= _PAGE_SILENT_READ;
return pte;
}
#else
diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h
index 8edabb0..cefa657 100644
--- a/include/asm-mips/sigcontext.h
+++ b/include/asm-mips/sigcontext.h
@@ -55,8 +55,14 @@
struct sigcontext {
unsigned long sc_regs[32];
unsigned long sc_fpregs[32];
- unsigned long sc_hi[4];
- unsigned long sc_lo[4];
+ unsigned long sc_mdhi;
+ unsigned long sc_hi1;
+ unsigned long sc_hi2;
+ unsigned long sc_hi3;
+ unsigned long sc_mdlo;
+ unsigned long sc_lo1;
+ unsigned long sc_lo2;
+ unsigned long sc_lo3;
unsigned long sc_pc;
unsigned int sc_fpc_csr;
unsigned int sc_used_math;
diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h
index ebf6055..6d533b0 100644
--- a/include/asm-powerpc/termbits.h
+++ b/include/asm-powerpc/termbits.h
@@ -153,6 +153,7 @@
#define HUPCL 00040000
#define CLOCAL 00100000
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
/* c_lflag bits */
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 908acb4..edde246 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -321,8 +321,10 @@
#define __NR_readlinkat 296
#define __NR_fchmodat 297
#define __NR_faccessat 298
+#define __NR_get_robust_list 299
+#define __NR_set_robust_list 300
-#define __NR_syscalls 299
+#define __NR_syscalls 301
#ifdef __KERNEL__
#define __NR__exit __NR_exit
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index f5611a7..45a5765 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -316,11 +316,13 @@
#define __NR_pselect6 297
#define __NR_ppoll 298
#define __NR_unshare 299
+#define __NR_set_robust_list 300
+#define __NR_get_robust_list 301
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 299 entries (starting at zero). Therefore
- * find a free slot in the 0-299 range.
+ * sized to have 301 entries (starting at zero). Therefore
+ * find a free slot in the 0-301 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
index c7d5804..a8d39f2 100644
--- a/include/asm-sparc64/dma-mapping.h
+++ b/include/asm-sparc64/dma-mapping.h
@@ -4,7 +4,146 @@
#include <linux/config.h>
#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
+
+/* we implement the API below in terms of the existing PCI one,
+ * so include it */
+#include <linux/pci.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_dma_supported(to_pci_dev(dev), mask);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+ gfp_t flag)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_iommu_ops->alloc_consistent(to_pci_dev(dev), size, dma_handle, flag);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+ size, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+ size, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ BUG_ON(dev->bus != &pci_bus_type);
+
+ pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline int
+dma_mapping_error(dma_addr_t dma_addr)
+{
+ return pci_dma_mapping_error(dma_addr);
+}
+
#else
struct device;
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
index 7c5a589..e1ea67b 100644
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -42,7 +42,7 @@
struct pci_dev;
struct pci_iommu_ops {
- void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *);
+ void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *, gfp_t);
void (*free_consistent)(struct pci_dev *, size_t, void *, dma_addr_t);
dma_addr_t (*map_single)(struct pci_dev *, void *, size_t, int);
void (*unmap_single)(struct pci_dev *, dma_addr_t, size_t, int);
@@ -59,7 +59,7 @@
*/
static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
{
- return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle);
+ return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle, GFP_ATOMIC);
}
/* Free and unmap a consistent DMA buffer.
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index c44e746..cd464f4 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -689,6 +689,23 @@
#define pte_clear(mm,addr,ptep) \
set_pte_at((mm), (addr), (ptep), __pte(0UL))
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr) \
+({ \
+ pte_t newpte = (pte); \
+ if (tlb_type != hypervisor && pte_present(pte)) { \
+ unsigned long this_pfn = pte_pfn(pte); \
+ \
+ if (pfn_valid(this_pfn) && \
+ (((old_addr) ^ (new_addr)) & (1 << 13))) \
+ flush_dcache_page_all(current->mm, \
+ pfn_to_page(this_pfn)); \
+ } \
+ newpte; \
+})
+#endif
+
extern pgd_t swapper_pg_dir[2048];
extern pmd_t swapper_low_pmd_dir[2048];
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index 6870574..998ef4a 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -318,11 +318,13 @@
#define __NR_pselect6 297
#define __NR_ppoll 298
#define __NR_unshare 299
+#define __NR_set_robust_list 300
+#define __NR_get_robust_list 301
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
* all of the syscall tables in the Sparc kernel are
- * sized to have 299 entries (starting at zero). Therefore
- * find a free slot in the 0-299 range.
+ * sized to have 301 entries (starting at zero). Therefore
+ * find a free slot in the 0-301 range.
*/
#define _syscall0(type,name) \
diff --git a/include/asm-x86_64/elf.h b/include/asm-x86_64/elf.h
index c98633a..b4f8f4a 100644
--- a/include/asm-x86_64/elf.h
+++ b/include/asm-x86_64/elf.h
@@ -159,7 +159,7 @@
#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
/* 1GB for 64bit, 8MB for 32bit */
-#define STACK_RND_MASK (is_compat_task() ? 0x7ff : 0x3fffff)
+#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
#endif
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 2d71608..33d8f20 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -19,5 +19,4 @@
void (*cont)(const struct firmware *fw, void *context));
void release_firmware(const struct firmware *fw);
-void register_firmware(const char *name, const u8 *data, size_t size);
#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3de2bfb..f813bc8 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -213,6 +213,10 @@
#define FIBMAP _IO(0x00,1) /* bmap access */
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+
#ifdef __KERNEL__
#include <linux/linkage.h>
@@ -758,9 +762,6 @@
extern int fcntl_getlease(struct file *filp);
/* fs/sync.c */
-#define SYNC_FILE_RANGE_WAIT_BEFORE 1
-#define SYNC_FILE_RANGE_WRITE 2
-#define SYNC_FILE_RANGE_WAIT_AFTER 4
extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
unsigned int flags);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a3a0e07..16fbe59 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -110,5 +110,16 @@
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
+struct fsl_spi_platform_data {
+ u32 initial_spmode; /* initial SPMODE value */
+ u16 bus_num;
+
+ /* board specific information */
+ u16 max_chipselect;
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
+ u32 sysclk;
+};
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
diff --git a/include/linux/input.h b/include/linux/input.h
index 50e338d..ce1a756 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -345,6 +345,8 @@
#define KEY_SAVE 234
#define KEY_DOCUMENTS 235
+#define KEY_BATTERY 236
+
#define KEY_UNKNOWN 240
#define BTN_MISC 0x100
@@ -577,14 +579,9 @@
* Switch events
*/
-#define SW_0 0x00
-#define SW_1 0x01
-#define SW_2 0x02
-#define SW_3 0x03
-#define SW_4 0x04
-#define SW_5 0x05
-#define SW_6 0x06
-#define SW_7 0x07
+#define SW_LID 0x00 /* set = lid shut */
+#define SW_TABLET_MODE 0x01 /* set = tablet mode */
+#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_MAX 0x0f
/*
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index bdc556d..03a14a3 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -69,6 +69,7 @@
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz_bits; /* data block size */
+ unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
unsigned int error; /* data error */
unsigned int flags;
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index b5c2112..3674035 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -22,6 +22,7 @@
#else
#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
#endif
+#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
struct free_area {
struct list_head free_list;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d6fe048..590dc6d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1231,6 +1231,7 @@
#define PCI_DEVICE_ID_VIA_8380_0 0x0204
#define PCI_DEVICE_ID_VIA_3238_0 0x0238
#define PCI_DEVICE_ID_VIA_PT880 0x0258
+#define PCI_DEVICE_ID_VIA_PT880ULTRA 0x0308
#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259
#define PCI_DEVICE_ID_VIA_3269_0 0x0269
#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 3996960..60d49e5 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -52,6 +52,7 @@
struct mq_attr;
struct compat_stat;
struct compat_timeval;
+struct robust_list_head;
#include <linux/config.h>
#include <linux/types.h>
@@ -581,5 +582,10 @@
asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
unsigned int flags);
+asmlinkage long sys_get_robust_list(int pid,
+ struct robust_list_head __user **head_ptr,
+ size_t __user *len_ptr);
+asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
+ size_t len);
#endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d7670ec..ad7fa9c 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1141,8 +1141,13 @@
/* Compatibility layer interface -- v4l1-compat module */
typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
unsigned int cmd, void *arg);
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
+#endif
/* 32 Bits compatibility layer for 64 bits processors */
extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 530ae3f..fab5aed 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -73,11 +73,6 @@
int vt_waitactive(int vt);
void change_console(struct vc_data *new_vc);
void reset_vc(struct vc_data *vc);
-#ifdef CONFIG_VT
-int is_console_suspend_safe(void);
-#else
-static inline int is_console_suspend_safe(void) { return 1; }
-#endif
/*
* vc_screen.c shares this temporary buffer with the console write code so that
diff --git a/include/net/compat.h b/include/net/compat.h
index 8662b8f..e65cbed 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -3,6 +3,8 @@
#include <linux/config.h>
+struct sock;
+
#if defined(CONFIG_COMPAT)
#include <linux/compat.h>
@@ -23,7 +25,6 @@
compat_int_t cmsg_type;
};
-struct sock;
extern int compat_sock_get_timestamp(struct sock *, struct timeval __user *);
#else /* defined(CONFIG_COMPAT) */
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
index 86aefb1..c0c895d 100644
--- a/include/net/irda/irlmp.h
+++ b/include/net/irda/irlmp.h
@@ -112,7 +112,7 @@
struct timer_list watchdog_timer;
- IRLMP_STATE lsap_state; /* Connection state */
+ LSAP_STATE lsap_state; /* Connection state */
notify_t notify; /* Indication/Confirm entry points */
struct qos_info qos; /* QoS for this connection */
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 34a1a09..807d6f1 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -99,6 +99,7 @@
SCTP_CMD_DEL_NON_PRIMARY, /* Removes non-primary peer transports. */
SCTP_CMD_T3_RTX_TIMERS_STOP, /* Stops T3-rtx pending timers */
SCTP_CMD_FORCE_PRIM_RETRAN, /* Forces retrans. over primary path. */
+ SCTP_CMD_SET_SK_ERR, /* Set sk_err */
SCTP_CMD_LAST
} sctp_verb_t;
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index e673b2c..aa6033c 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -461,12 +461,12 @@
* there is room for a param header too.
*/
#define sctp_walk_params(pos, chunk, member)\
-_sctp_walk_params((pos), (chunk), WORD_ROUND(ntohs((chunk)->chunk_hdr.length)), member)
+_sctp_walk_params((pos), (chunk), ntohs((chunk)->chunk_hdr.length), member)
#define _sctp_walk_params(pos, chunk, end, member)\
for (pos.v = chunk->member;\
pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) &&\
- pos.v <= (void *)chunk + end - WORD_ROUND(ntohs(pos.p->length)) &&\
+ pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\
pos.v += WORD_ROUND(ntohs(pos.p->length)))
@@ -477,7 +477,7 @@
for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
sizeof(sctp_chunkhdr_t));\
(void *)err <= (void *)chunk_hdr + end - sizeof(sctp_errhdr_t) &&\
- (void *)err <= (void *)chunk_hdr + end - WORD_ROUND(ntohs(err->length)) &&\
+ (void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
ntohs(err->length) >= sizeof(sctp_errhdr_t); \
err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length))))
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 72248d1..ab81fdd 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2231,19 +2231,25 @@
* So only GFP_KERNEL allocations, if all nodes in the cpuset are
* short of memory, might require taking the callback_mutex mutex.
*
- * The first loop over the zonelist in mm/page_alloc.c:__alloc_pages()
- * calls here with __GFP_HARDWALL always set in gfp_mask, enforcing
- * hardwall cpusets - no allocation on a node outside the cpuset is
- * allowed (unless in interrupt, of course).
+ * The first call here from mm/page_alloc:get_page_from_freelist()
+ * has __GFP_HARDWALL set in gfp_mask, enforcing hardwall cpusets, so
+ * no allocation on a node outside the cpuset is allowed (unless in
+ * interrupt, of course).
*
- * The second loop doesn't even call here for GFP_ATOMIC requests
- * (if the __alloc_pages() local variable 'wait' is set). That check
- * and the checks below have the combined affect in the second loop of
- * the __alloc_pages() routine that:
+ * The second pass through get_page_from_freelist() doesn't even call
+ * here for GFP_ATOMIC calls. For those calls, the __alloc_pages()
+ * variable 'wait' is not set, and the bit ALLOC_CPUSET is not set
+ * in alloc_flags. That logic and the checks below have the combined
+ * affect that:
* in_interrupt - any node ok (current task context irrelevant)
* GFP_ATOMIC - any node ok
* GFP_KERNEL - any node in enclosing mem_exclusive cpuset ok
* GFP_USER - only nodes in current tasks mems allowed ok.
+ *
+ * Rule:
+ * Don't call cpuset_zone_allowed() if you can't sleep, unless you
+ * pass in the __GFP_HARDWALL flag set in gfp_flag, which disables
+ * the code that might scan up ancestor cpusets and sleep.
**/
int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
@@ -2255,6 +2261,7 @@
if (in_interrupt())
return 1;
node = z->zone_pgdat->node_id;
+ might_sleep_if(!(gfp_mask & __GFP_HARDWALL));
if (node_isset(node, current->mems_allowed))
return 1;
if (gfp_mask & __GFP_HARDWALL) /* If hardwall request, stop here */
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index b7f0388..01fa2ae 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -456,6 +456,7 @@
return ret;
}
+EXPORT_SYMBOL_GPL(hrtimer_start);
/**
* hrtimer_try_to_cancel - try to deactivate a timer
@@ -484,6 +485,7 @@
return ret;
}
+EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
/**
* hrtimer_cancel - cancel a timer and wait for the handler to finish.
@@ -504,6 +506,7 @@
cpu_relax();
}
}
+EXPORT_SYMBOL_GPL(hrtimer_cancel);
/**
* hrtimer_get_remaining - get remaining time for the timer
@@ -522,6 +525,7 @@
return rem;
}
+EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
#ifdef CONFIG_NO_IDLE_HZ
/**
@@ -580,6 +584,7 @@
timer->base = &bases[clock_id];
timer->node.rb_parent = HRTIMER_INACTIVE;
}
+EXPORT_SYMBOL_GPL(hrtimer_init);
/**
* hrtimer_get_res - get the timer resolution for a clock
@@ -599,6 +604,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(hrtimer_get_res);
/*
* Expire the per base hrtimer-queue:
diff --git a/kernel/sched.c b/kernel/sched.c
index 4c64f85..c13f1bd 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -665,55 +665,13 @@
}
/*
- * We place interactive tasks back into the active array, if possible.
- *
- * To guarantee that this does not starve expired tasks we ignore the
- * interactivity of a task if the first expired task had to wait more
- * than a 'reasonable' amount of time. This deadline timeout is
- * load-dependent, as the frequency of array switched decreases with
- * increasing number of running tasks. We also ignore the interactivity
- * if a better static_prio task has expired, and switch periodically
- * regardless, to ensure that highly interactive tasks do not starve
- * the less fortunate for unreasonably long periods.
- */
-static inline int expired_starving(runqueue_t *rq)
-{
- int limit;
-
- /*
- * Arrays were recently switched, all is well
- */
- if (!rq->expired_timestamp)
- return 0;
-
- limit = STARVATION_LIMIT * rq->nr_running;
-
- /*
- * It's time to switch arrays
- */
- if (jiffies - rq->expired_timestamp >= limit)
- return 1;
-
- /*
- * There's a better selection in the expired array
- */
- if (rq->curr->static_prio > rq->best_expired_prio)
- return 1;
-
- /*
- * All is well
- */
- return 0;
-}
-
-/*
* __activate_task - move a task to the runqueue.
*/
static void __activate_task(task_t *p, runqueue_t *rq)
{
prio_array_t *target = rq->active;
- if (unlikely(batch_task(p) || (expired_starving(rq) && !rt_task(p))))
+ if (batch_task(p))
target = rq->expired;
enqueue_task(p, target);
rq->nr_running++;
@@ -2532,6 +2490,22 @@
}
/*
+ * We place interactive tasks back into the active array, if possible.
+ *
+ * To guarantee that this does not starve expired tasks we ignore the
+ * interactivity of a task if the first expired task had to wait more
+ * than a 'reasonable' amount of time. This deadline timeout is
+ * load-dependent, as the frequency of array switched decreases with
+ * increasing number of running tasks. We also ignore the interactivity
+ * if a better static_prio task has expired:
+ */
+#define EXPIRED_STARVING(rq) \
+ ((STARVATION_LIMIT && ((rq)->expired_timestamp && \
+ (jiffies - (rq)->expired_timestamp >= \
+ STARVATION_LIMIT * ((rq)->nr_running) + 1))) || \
+ ((rq)->curr->static_prio > (rq)->best_expired_prio))
+
+/*
* Account user cpu time to a process.
* @p: the process that the cpu time gets accounted to
* @hardirq_offset: the offset to subtract from hardirq_count()
@@ -2666,7 +2640,7 @@
if (!rq->expired_timestamp)
rq->expired_timestamp = jiffies;
- if (!TASK_INTERACTIVE(p) || expired_starving(rq)) {
+ if (!TASK_INTERACTIVE(p) || EXPIRED_STARVING(rq)) {
enqueue_task(p, rq->expired);
if (p->static_prio < rq->best_expired_prio)
rq->best_expired_prio = p->static_prio;
diff --git a/kernel/timer.c b/kernel/timer.c
index 67eaf0f..9e49dee 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -541,6 +541,22 @@
}
spin_unlock(&base->lock);
+ /*
+ * It can happen that other CPUs service timer IRQs and increment
+ * jiffies, but we have not yet got a local timer tick to process
+ * the timer wheels. In that case, the expiry time can be before
+ * jiffies, but since the high-resolution timer here is relative to
+ * jiffies, the default expression when high-resolution timers are
+ * not active,
+ *
+ * time_before(MAX_JIFFY_OFFSET + jiffies, expires)
+ *
+ * would falsely evaluate to true. If that is the case, just
+ * return jiffies so that we can immediately fire the local timer
+ */
+ if (time_before(expires, jiffies))
+ return jiffies;
+
if (time_before(hr_expires, expires))
return hr_expires;
diff --git a/lib/kobject.c b/lib/kobject.c
index b46350c..687ab41 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -198,14 +198,14 @@
/* be noisy on error issues */
if (error == -EEXIST)
- printk("kobject_add failed for %s with -EEXIST, "
+ pr_debug("kobject_add failed for %s with -EEXIST, "
"don't try to register things with the "
"same name in the same directory.\n",
kobject_name(kobj));
else
- printk("kobject_add failed for %s (%d)\n",
+ pr_debug("kobject_add failed for %s (%d)\n",
kobject_name(kobj), error);
- dump_stack();
+ /* dump_stack(); */
}
return error;
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 1ae2b2c..70df5c0 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -91,8 +91,8 @@
if (start_pfn < zone->zone_start_pfn)
zone->zone_start_pfn = start_pfn;
- if (end_pfn > old_zone_end_pfn)
- zone->spanned_pages = end_pfn - zone->zone_start_pfn;
+ zone->spanned_pages = max(old_zone_end_pfn, end_pfn) -
+ zone->zone_start_pfn;
zone_span_writeunlock(zone);
}
@@ -106,8 +106,8 @@
if (start_pfn < pgdat->node_start_pfn)
pgdat->node_start_pfn = start_pfn;
- if (end_pfn > old_pgdat_end_pfn)
- pgdat->node_spanned_pages = end_pfn - pgdat->node_start_pfn;
+ pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
+ pgdat->node_start_pfn;
}
int online_pages(unsigned long pfn, unsigned long nr_pages)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 813b4ec..253a450 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -951,7 +951,7 @@
goto got_pg;
do {
- if (cpuset_zone_allowed(*z, gfp_mask))
+ if (cpuset_zone_allowed(*z, gfp_mask|__GFP_HARDWALL))
wakeup_kswapd(*z, order);
} while (*(++z));
@@ -970,7 +970,8 @@
alloc_flags |= ALLOC_HARDER;
if (gfp_mask & __GFP_HIGH)
alloc_flags |= ALLOC_HIGH;
- alloc_flags |= ALLOC_CPUSET;
+ if (wait)
+ alloc_flags |= ALLOC_CPUSET;
/*
* Go through the zonelist again. Let __GFP_HIGH and allocations
@@ -2124,14 +2125,22 @@
#ifdef CONFIG_FLAT_NODE_MEM_MAP
/* ia64 gets its own node_mem_map, before this, without bootmem */
if (!pgdat->node_mem_map) {
- unsigned long size;
+ unsigned long size, start, end;
struct page *map;
- size = (pgdat->node_spanned_pages + 1) * sizeof(struct page);
+ /*
+ * The zone's endpoints aren't required to be MAX_ORDER
+ * aligned but the node_mem_map endpoints must be in order
+ * for the buddy allocator to function correctly.
+ */
+ start = pgdat->node_start_pfn & ~(MAX_ORDER_NR_PAGES - 1);
+ end = pgdat->node_start_pfn + pgdat->node_spanned_pages;
+ end = ALIGN(end, MAX_ORDER_NR_PAGES);
+ size = (end - start) * sizeof(struct page);
map = alloc_remap(pgdat->node_id, size);
if (!map)
map = alloc_bootmem_node(pgdat, size);
- pgdat->node_mem_map = map;
+ pgdat->node_mem_map = map + (pgdat->node_start_pfn - start);
}
#ifdef CONFIG_FLATMEM
/*
diff --git a/mm/slab.c b/mm/slab.c
index d31a06b..f1b644e 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -207,11 +207,6 @@
#define BUFCTL_ACTIVE (((kmem_bufctl_t)(~0U))-2)
#define SLAB_LIMIT (((kmem_bufctl_t)(~0U))-3)
-/* Max number of objs-per-slab for caches which use off-slab slabs.
- * Needed to avoid a possible looping condition in cache_grow().
- */
-static unsigned long offslab_limit;
-
/*
* struct slab
*
@@ -1356,12 +1351,6 @@
NULL, NULL);
}
- /* Inc off-slab bufctl limit until the ceiling is hit. */
- if (!(OFF_SLAB(sizes->cs_cachep))) {
- offslab_limit = sizes->cs_size - sizeof(struct slab);
- offslab_limit /= sizeof(kmem_bufctl_t);
- }
-
sizes->cs_dmacachep = kmem_cache_create(names->name_dma,
sizes->cs_size,
ARCH_KMALLOC_MINALIGN,
@@ -1780,6 +1769,7 @@
static size_t calculate_slab_order(struct kmem_cache *cachep,
size_t size, size_t align, unsigned long flags)
{
+ unsigned long offslab_limit;
size_t left_over = 0;
int gfporder;
@@ -1791,9 +1781,18 @@
if (!num)
continue;
- /* More than offslab_limit objects will cause problems */
- if ((flags & CFLGS_OFF_SLAB) && num > offslab_limit)
- break;
+ if (flags & CFLGS_OFF_SLAB) {
+ /*
+ * Max number of objs-per-slab for caches which
+ * use off-slab slabs. Needed to avoid a possible
+ * looping condition in cache_grow().
+ */
+ offslab_limit = size - sizeof(struct slab);
+ offslab_limit /= sizeof(kmem_bufctl_t);
+
+ if (num > offslab_limit)
+ break;
+ }
/* Found something acceptable - save it away */
cachep->num = num;
diff --git a/mm/sparse.c b/mm/sparse.c
index c5e89eb..100040c 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -87,11 +87,8 @@
unsigned long root_nr;
struct mem_section* root;
- for (root_nr = 0;
- root_nr < NR_MEM_SECTIONS;
- root_nr += SECTIONS_PER_ROOT) {
- root = __nr_to_section(root_nr);
-
+ for (root_nr = 0; root_nr < NR_SECTION_ROOTS; root_nr++) {
+ root = __nr_to_section(root_nr * SECTIONS_PER_ROOT);
if (!root)
continue;
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 22d806c..12da21a 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -55,7 +55,7 @@
static void __exit br_deinit(void)
{
- llc_sap_close(br_stp_sap);
+ rcu_assign_pointer(br_stp_sap->rcv_func, NULL);
#ifdef CONFIG_BRIDGE_NETFILTER
br_netfilter_fini();
@@ -67,6 +67,7 @@
synchronize_net();
+ llc_sap_put(br_stp_sap);
br_fdb_get_hook = NULL;
br_fdb_put_hook = NULL;
diff --git a/net/core/dev.c b/net/core/dev.c
index 2dce673..4fba549 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -127,7 +127,7 @@
* sure which should go first, but I bet it won't make much
* difference if we are running VLANs. The good news is that
* this protocol won't be in the list unless compiled in, so
- * the average user (w/out VLANs) will not be adversly affected.
+ * the average user (w/out VLANs) will not be adversely affected.
* --BLG
*
* 0800 IP
@@ -149,7 +149,7 @@
static struct list_head ptype_all; /* Taps */
/*
- * The @dev_base list is protected by @dev_base_lock and the rtln
+ * The @dev_base list is protected by @dev_base_lock and the rtnl
* semaphore.
*
* Pure readers hold dev_base_lock for reading.
@@ -641,10 +641,12 @@
* @name: name format string
*
* Passed a format string - eg "lt%d" it will try and find a suitable
- * id. Not efficient for many devices, not called a lot. The caller
- * must hold the dev_base or rtnl lock while allocating the name and
- * adding the device in order to avoid duplicates. Returns the number
- * of the unit assigned or a negative errno code.
+ * id. It scans list of devices to build up a free map, then chooses
+ * the first empty slot. The caller must hold the dev_base or rtnl lock
+ * while allocating the name and adding the device in order to avoid
+ * duplicates.
+ * Limited to bits_per_byte * page size devices (ie 32K on most platforms).
+ * Returns the number of the unit assigned or a negative errno code.
*/
int dev_alloc_name(struct net_device *dev, const char *name)
@@ -744,7 +746,7 @@
}
/**
- * netdev_features_change - device changes fatures
+ * netdev_features_change - device changes features
* @dev: device to cause notification
*
* Called to indicate a device has changed features.
@@ -2196,7 +2198,7 @@
* @dev: device
* @inc: modifier
*
- * Add or remove promsicuity from a device. While the count in the device
+ * Add or remove promiscuity from a device. While the count in the device
* remains above zero the interface remains promiscuous. Once it hits zero
* the device reverts back to normal filtering operation. A negative inc
* value is used to drop promiscuity on the device.
@@ -3122,7 +3124,7 @@
void free_netdev(struct net_device *dev)
{
#ifdef CONFIG_SYSFS
- /* Compatiablity with error handling in drivers */
+ /* Compatibility with error handling in drivers */
if (dev->reg_state == NETREG_UNINITIALIZED) {
kfree((char *)dev - dev->padded);
return;
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index cd810f41..95278b2 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -210,7 +210,7 @@
skb->h.icmph->code != ICMP_FRAG_NEEDED)
return;
- spi = ntohl(ntohs(ipch->cpi));
+ spi = htonl(ntohs(ipch->cpi));
x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr,
spi, IPPROTO_COMP, AF_INET);
if (!x)
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 3d560de..d407253 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -170,8 +170,8 @@
Documentation/modules.txt. If unsure, say `N'.
config IP_NF_H323
- tristate 'H.323 protocol support'
- depends on IP_NF_CONNTRACK
+ tristate 'H.323 protocol support (EXPERIMENTAL)'
+ depends on IP_NF_CONNTRACK && EXPERIMENTAL
help
H.323 is a VoIP signalling protocol from ITU-T. As one of the most
important VoIP protocols, it is widely used by voice hardware and
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index 979a2ea..a297da7 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++ b/net/ipv4/netfilter/ip_conntrack_core.c
@@ -1318,6 +1318,7 @@
.tuple.dst.u.tcp.port;
sin.sin_addr.s_addr = ct->tuplehash[IP_CT_DIR_ORIGINAL]
.tuple.dst.ip;
+ memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
DEBUGP("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
index 355a53a..26dfeca 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
@@ -528,14 +528,15 @@
/* Decode */
if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
} else if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)))
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
}
@@ -554,7 +555,7 @@
/* Decode the extension components */
for (opt = 0; opt < bmp2_len; opt++, i++, son++) {
- if (son->attr & STOP) {
+ if (i < f->ub && son->attr & STOP) {
PRINT("%*.s%s\n", (level + 1) * TAB_SIZE, " ",
son->name);
return H323_ERROR_STOP;
@@ -584,8 +585,8 @@
beg = bs->cur;
if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
@@ -660,18 +661,20 @@
i <
effective_count ?
base : NULL,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
} else
- if ((err = (Decoders[son->type]) (bs, son,
- i < effective_count ?
- base : NULL,
- level + 1)))
- return err;
+ if ((err = (Decoders[son->type]) (bs, son,
+ i <
+ effective_count ?
+ base : NULL,
+ level + 1)) <
+ H323_ERROR_NONE)
+ return err;
if (base)
base += son->offset;
@@ -735,13 +738,14 @@
}
beg = bs->cur;
- if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) >
- H323_ERROR_STOP)
+ if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
- } else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)))
+ } else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+ H323_ERROR_NONE)
return err;
return H323_ERROR_NONE;
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
index 7d3ba43..8ccfe17 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
@@ -469,8 +469,8 @@
DEBUGP("%s but no session\n", pptp_msg_name[msg]);
break;
}
- if (info->sstate != PPTP_CALL_IN_REP
- && info->sstate != PPTP_CALL_IN_CONF) {
+ if (info->cstate != PPTP_CALL_IN_REP
+ && info->cstate != PPTP_CALL_IN_CONF) {
DEBUGP("%s but never sent IN_CALL_REPLY\n",
pptp_msg_name[msg]);
break;
diff --git a/net/ipv4/netfilter/ip_nat_snmp_basic.c b/net/ipv4/netfilter/ip_nat_snmp_basic.c
index c622538..c332442 100644
--- a/net/ipv4/netfilter/ip_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/ip_nat_snmp_basic.c
@@ -768,6 +768,7 @@
len *= sizeof(unsigned long);
*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
if (*obj == NULL) {
+ kfree(lp);
kfree(id);
if (net_ratelimit())
printk("OOM in bsalg (%d)\n", __LINE__);
@@ -1003,12 +1004,12 @@
return 1;
+err_addr_free:
+ kfree((unsigned long *)trap->ip_address);
+
err_id_free:
kfree(trap->id);
-err_addr_free:
- kfree((unsigned long *)trap->ip_address);
-
return 0;
}
@@ -1126,11 +1127,10 @@
struct snmp_v1_trap trap;
unsigned char ret = snmp_trap_decode(&ctx, &trap, map, check);
- /* Discard trap allocations regardless */
- kfree(trap.id);
- kfree((unsigned long *)trap.ip_address);
-
- if (!ret)
+ if (ret) {
+ kfree(trap.id);
+ kfree((unsigned long *)trap.ip_address);
+ } else
return ret;
} else {
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index 5bc9f64..77d9744 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -348,6 +348,7 @@
.tuple.dst.u.tcp.port;
sin.sin_addr.s_addr = ct->tuplehash[IP_CT_DIR_ORIGINAL]
.tuple.dst.u3.ip;
+ memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
DEBUGP("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
diff --git a/net/ipv4/tcp_highspeed.c b/net/ipv4/tcp_highspeed.c
index b72fa55..ba7c63c 100644
--- a/net/ipv4/tcp_highspeed.c
+++ b/net/ipv4/tcp_highspeed.c
@@ -135,7 +135,8 @@
/* Do additive increase */
if (tp->snd_cwnd < tp->snd_cwnd_clamp) {
- tp->snd_cwnd_cnt += ca->ai;
+ /* cwnd = cwnd + a(w) / cwnd */
+ tp->snd_cwnd_cnt += ca->ai + 1;
if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
tp->snd_cwnd_cnt -= tp->snd_cwnd;
tp->snd_cwnd++;
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index f285bbf..8604c74 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -221,7 +221,7 @@
if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
u16 *ipcomp_hdr = (u16 *)xprth;
- fl->fl_ipsec_spi = ntohl(ntohs(ipcomp_hdr[1]));
+ fl->fl_ipsec_spi = htonl(ntohs(ipcomp_hdr[1]));
}
break;
default:
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 05eb67d..4863643 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -208,7 +208,7 @@
if (type != ICMPV6_DEST_UNREACH && type != ICMPV6_PKT_TOOBIG)
return;
- spi = ntohl(ntohs(ipcomph->cpi));
+ spi = htonl(ntohs(ipcomph->cpi));
x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, IPPROTO_COMP, AF_INET6);
if (!x)
return;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 0190e39..8a77793 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -280,10 +280,13 @@
{
struct neighbour *neigh = rt->rt6i_nexthop;
int m = 0;
- if (neigh) {
+ if (rt->rt6i_flags & RTF_NONEXTHOP ||
+ !(rt->rt6i_flags & RTF_GATEWAY))
+ m = 1;
+ else if (neigh) {
read_lock_bh(&neigh->lock);
if (neigh->nud_state & NUD_VALID)
- m = 1;
+ m = 2;
read_unlock_bh(&neigh->lock);
}
return m;
@@ -292,15 +295,18 @@
static int rt6_score_route(struct rt6_info *rt, int oif,
int strict)
{
- int m = rt6_check_dev(rt, oif);
+ int m, n;
+
+ m = rt6_check_dev(rt, oif);
if (!m && (strict & RT6_SELECT_F_IFACE))
return -1;
#ifdef CONFIG_IPV6_ROUTER_PREF
m |= IPV6_DECODE_PREF(IPV6_EXTRACT_PREF(rt->rt6i_flags)) << 2;
#endif
- if (rt6_check_neigh(rt))
+ n = rt6_check_neigh(rt);
+ if (n > 1)
m |= 16;
- else if (strict & RT6_SELECT_F_REACHABLE)
+ else if (!n && strict & RT6_SELECT_F_REACHABLE)
return -1;
return m;
}
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
index 254f907..2d2e2b1 100644
--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -544,7 +544,8 @@
{
struct sk_buff *tx_skb;
int n;
- __u32 tmp_be32, tmp_be16;
+ __u32 tmp_be32;
+ __be16 tmp_be16;
__u8 *fp;
IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
diff --git a/net/sctp/input.c b/net/sctp/input.c
index d117ebc..1662f9c 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -73,6 +73,8 @@
const union sctp_addr *peer,
struct sctp_transport **pt);
+static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
+
/* Calculate the SCTP checksum of an SCTP packet. */
static inline int sctp_rcv_checksum(struct sk_buff *skb)
@@ -186,7 +188,6 @@
*/
if (sk->sk_bound_dev_if && (sk->sk_bound_dev_if != af->skb_iif(skb)))
{
- sock_put(sk);
if (asoc) {
sctp_association_put(asoc);
asoc = NULL;
@@ -197,7 +198,6 @@
sk = sctp_get_ctl_sock();
ep = sctp_sk(sk)->ep;
sctp_endpoint_hold(ep);
- sock_hold(sk);
rcvr = &ep->base;
}
@@ -253,25 +253,18 @@
*/
sctp_bh_lock_sock(sk);
- /* It is possible that the association could have moved to a different
- * socket if it is peeled off. If so, update the sk.
- */
- if (sk != rcvr->sk) {
- sctp_bh_lock_sock(rcvr->sk);
- sctp_bh_unlock_sock(sk);
- sk = rcvr->sk;
- }
-
if (sock_owned_by_user(sk))
- sk_add_backlog(sk, skb);
+ sctp_add_backlog(sk, skb);
else
- sctp_backlog_rcv(sk, skb);
+ sctp_inq_push(&chunk->rcvr->inqueue, chunk);
- /* Release the sock and the sock ref we took in the lookup calls.
- * The asoc/ep ref will be released in sctp_backlog_rcv.
- */
sctp_bh_unlock_sock(sk);
- sock_put(sk);
+
+ /* Release the asoc/ep ref we took in the lookup calls. */
+ if (asoc)
+ sctp_association_put(asoc);
+ else
+ sctp_endpoint_put(ep);
return 0;
@@ -280,8 +273,7 @@
return 0;
discard_release:
- /* Release any structures we may be holding. */
- sock_put(sk);
+ /* Release the asoc/ep ref we took in the lookup calls. */
if (asoc)
sctp_association_put(asoc);
else
@@ -290,56 +282,87 @@
goto discard_it;
}
-/* Handle second half of inbound skb processing. If the sock was busy,
- * we may have need to delay processing until later when the sock is
- * released (on the backlog). If not busy, we call this routine
- * directly from the bottom half.
+/* Process the backlog queue of the socket. Every skb on
+ * the backlog holds a ref on an association or endpoint.
+ * We hold this ref throughout the state machine to make
+ * sure that the structure we need is still around.
*/
int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb)
{
struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
- struct sctp_inq *inqueue = NULL;
+ struct sctp_inq *inqueue = &chunk->rcvr->inqueue;
struct sctp_ep_common *rcvr = NULL;
+ int backloged = 0;
rcvr = chunk->rcvr;
- BUG_TRAP(rcvr->sk == sk);
+ /* If the rcvr is dead then the association or endpoint
+ * has been deleted and we can safely drop the chunk
+ * and refs that we are holding.
+ */
+ if (rcvr->dead) {
+ sctp_chunk_free(chunk);
+ goto done;
+ }
- if (rcvr->dead) {
- sctp_chunk_free(chunk);
- } else {
- inqueue = &chunk->rcvr->inqueue;
- sctp_inq_push(inqueue, chunk);
- }
+ if (unlikely(rcvr->sk != sk)) {
+ /* In this case, the association moved from one socket to
+ * another. We are currently sitting on the backlog of the
+ * old socket, so we need to move.
+ * However, since we are here in the process context we
+ * need to take make sure that the user doesn't own
+ * the new socket when we process the packet.
+ * If the new socket is user-owned, queue the chunk to the
+ * backlog of the new socket without dropping any refs.
+ * Otherwise, we can safely push the chunk on the inqueue.
+ */
- /* Release the asoc/ep ref we took in the lookup calls in sctp_rcv. */
- if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
- sctp_association_put(sctp_assoc(rcvr));
- else
- sctp_endpoint_put(sctp_ep(rcvr));
-
+ sk = rcvr->sk;
+ sctp_bh_lock_sock(sk);
+
+ if (sock_owned_by_user(sk)) {
+ sk_add_backlog(sk, skb);
+ backloged = 1;
+ } else
+ sctp_inq_push(inqueue, chunk);
+
+ sctp_bh_unlock_sock(sk);
+
+ /* If the chunk was backloged again, don't drop refs */
+ if (backloged)
+ return 0;
+ } else {
+ sctp_inq_push(inqueue, chunk);
+ }
+
+done:
+ /* Release the refs we took in sctp_add_backlog */
+ if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+ sctp_association_put(sctp_assoc(rcvr));
+ else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+ sctp_endpoint_put(sctp_ep(rcvr));
+ else
+ BUG();
+
return 0;
}
-void sctp_backlog_migrate(struct sctp_association *assoc,
- struct sock *oldsk, struct sock *newsk)
+static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb)
{
- struct sk_buff *skb;
- struct sctp_chunk *chunk;
+ struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
+ struct sctp_ep_common *rcvr = chunk->rcvr;
- skb = oldsk->sk_backlog.head;
- oldsk->sk_backlog.head = oldsk->sk_backlog.tail = NULL;
- while (skb != NULL) {
- struct sk_buff *next = skb->next;
+ /* Hold the assoc/ep while hanging on the backlog queue.
+ * This way, we know structures we need will not disappear from us
+ */
+ if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+ sctp_association_hold(sctp_assoc(rcvr));
+ else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+ sctp_endpoint_hold(sctp_ep(rcvr));
+ else
+ BUG();
- chunk = SCTP_INPUT_CB(skb)->chunk;
- skb->next = NULL;
- if (&assoc->base == chunk->rcvr)
- sk_add_backlog(newsk, skb);
- else
- sk_add_backlog(oldsk, skb);
- skb = next;
- }
+ sk_add_backlog(sk, skb);
}
/* Handle icmp frag needed error. */
@@ -412,7 +435,7 @@
union sctp_addr daddr;
struct sctp_af *af;
struct sock *sk = NULL;
- struct sctp_association *asoc = NULL;
+ struct sctp_association *asoc;
struct sctp_transport *transport = NULL;
*app = NULL; *tpp = NULL;
@@ -453,7 +476,6 @@
return sk;
out:
- sock_put(sk);
if (asoc)
sctp_association_put(asoc);
return NULL;
@@ -463,7 +485,6 @@
void sctp_err_finish(struct sock *sk, struct sctp_association *asoc)
{
sctp_bh_unlock_sock(sk);
- sock_put(sk);
if (asoc)
sctp_association_put(asoc);
}
@@ -490,7 +511,7 @@
int type = skb->h.icmph->type;
int code = skb->h.icmph->code;
struct sock *sk;
- struct sctp_association *asoc;
+ struct sctp_association *asoc = NULL;
struct sctp_transport *transport;
struct inet_sock *inet;
char *saveip, *savesctp;
@@ -716,7 +737,6 @@
hit:
sctp_endpoint_hold(ep);
- sock_hold(epb->sk);
read_unlock(&head->lock);
return ep;
}
@@ -818,7 +838,6 @@
hit:
*pt = transport;
sctp_association_hold(asoc);
- sock_hold(epb->sk);
read_unlock(&head->lock);
return asoc;
}
@@ -846,7 +865,6 @@
struct sctp_transport *transport;
if ((asoc = sctp_lookup_association(laddr, paddr, &transport))) {
- sock_put(asoc->base.sk);
sctp_association_put(asoc);
return 1;
}
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 8d1dc24..c5beb2a 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -498,10 +498,6 @@
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
SCTP_STATE(SCTP_STATE_CLOSED));
- /* Set sk_err to ECONNRESET on a 1-1 style socket. */
- if (!sctp_style(asoc->base.sk, UDP))
- asoc->base.sk->sk_err = ECONNRESET;
-
/* SEND_FAILED sent later when cleaning up the association. */
asoc->outqueue.error = error;
sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
@@ -838,6 +834,15 @@
return;
}
+/* Helper function to set sk_err on a 1-1 style socket. */
+static void sctp_cmd_set_sk_err(struct sctp_association *asoc, int error)
+{
+ struct sock *sk = asoc->base.sk;
+
+ if (!sctp_style(sk, UDP))
+ sk->sk_err = error;
+}
+
/* These three macros allow us to pull the debugging code out of the
* main flow of sctp_do_sm() to keep attention focused on the real
* functionality there.
@@ -1458,6 +1463,9 @@
local_cork = 0;
asoc->peer.retran_path = t;
break;
+ case SCTP_CMD_SET_SK_ERR:
+ sctp_cmd_set_sk_err(asoc, cmd->obj.error);
+ break;
default:
printk(KERN_WARNING "Impossible command: %u, %p\n",
cmd->verb, cmd->obj.ptr);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 8cdba51..8bc2792 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -93,7 +93,7 @@
static struct sctp_sackhdr *sctp_sm_pull_sack(struct sctp_chunk *chunk);
static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands,
- __u16 error,
+ __u16 error, int sk_err,
const struct sctp_association *asoc,
struct sctp_transport *transport);
@@ -448,7 +448,7 @@
__u32 init_tag;
struct sctp_chunk *err_chunk;
struct sctp_packet *packet;
- sctp_disposition_t ret;
+ __u16 error;
if (!sctp_vtag_verify(chunk, asoc))
return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -480,11 +480,9 @@
goto nomem;
sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
- SCTP_STATE(SCTP_STATE_CLOSED));
- SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
- sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
- return SCTP_DISPOSITION_DELETE_TCB;
+ return sctp_stop_t1_and_abort(commands, SCTP_ERROR_INV_PARAM,
+ ECONNREFUSED, asoc,
+ chunk->transport);
}
/* Verify the INIT chunk before processing it. */
@@ -511,27 +509,16 @@
sctp_add_cmd_sf(commands, SCTP_CMD_SEND_PKT,
SCTP_PACKET(packet));
SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS);
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
- SCTP_STATE(SCTP_STATE_CLOSED));
- sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
- SCTP_NULL());
- return SCTP_DISPOSITION_CONSUME;
+ error = SCTP_ERROR_INV_PARAM;
} else {
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
- SCTP_STATE(SCTP_STATE_CLOSED));
- sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
- SCTP_NULL());
- return SCTP_DISPOSITION_NOMEM;
+ error = SCTP_ERROR_NO_RESOURCE;
}
} else {
- ret = sctp_sf_tabort_8_4_8(ep, asoc, type, arg,
- commands);
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
- SCTP_STATE(SCTP_STATE_CLOSED));
- sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
- SCTP_NULL());
- return ret;
+ sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands);
+ error = SCTP_ERROR_INV_PARAM;
}
+ return sctp_stop_t1_and_abort(commands, error, ECONNREFUSED,
+ asoc, chunk->transport);
}
/* Tag the variable length parameters. Note that we never
@@ -886,6 +873,8 @@
struct sctp_transport *transport = (struct sctp_transport *) arg;
if (asoc->overall_error_count >= asoc->max_retrans) {
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -1030,6 +1019,12 @@
commands);
hbinfo = (sctp_sender_hb_info_t *) chunk->skb->data;
+ /* Make sure that the length of the parameter is what we expect */
+ if (ntohs(hbinfo->param_hdr.length) !=
+ sizeof(sctp_sender_hb_info_t)) {
+ return SCTP_DISPOSITION_DISCARD;
+ }
+
from_addr = hbinfo->daddr;
link = sctp_assoc_lookup_paddr(asoc, &from_addr);
@@ -2126,6 +2121,8 @@
int attempts = asoc->init_err_counter + 1;
if (attempts > asoc->max_init_attempts) {
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(SCTP_ERROR_STALE_COOKIE));
return SCTP_DISPOSITION_DELETE_TCB;
@@ -2262,6 +2259,7 @@
if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(ECONNRESET));
/* ASSOC_FAILED will DELETE_TCB. */
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, SCTP_U32(error));
SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -2306,7 +2304,8 @@
if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
- return sctp_stop_t1_and_abort(commands, error, asoc, chunk->transport);
+ return sctp_stop_t1_and_abort(commands, error, ECONNREFUSED, asoc,
+ chunk->transport);
}
/*
@@ -2318,7 +2317,8 @@
void *arg,
sctp_cmd_seq_t *commands)
{
- return sctp_stop_t1_and_abort(commands, SCTP_ERROR_NO_ERROR, asoc,
+ return sctp_stop_t1_and_abort(commands, SCTP_ERROR_NO_ERROR,
+ ENOPROTOOPT, asoc,
(struct sctp_transport *)arg);
}
@@ -2343,7 +2343,7 @@
* This is common code called by several sctp_sf_*_abort() functions above.
*/
static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands,
- __u16 error,
+ __u16 error, int sk_err,
const struct sctp_association *asoc,
struct sctp_transport *transport)
{
@@ -2353,6 +2353,7 @@
SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(sk_err));
/* CMD_INIT_FAILED will DELETE_TCB. */
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(error));
@@ -3336,6 +3337,8 @@
sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNABORTED));
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_ASCONF_ACK));
SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -3362,6 +3365,8 @@
* processing the rest of the chunks in the packet.
*/
sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNABORTED));
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_ASCONF_ACK));
SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -3714,9 +3719,13 @@
if (asoc->state <= SCTP_STATE_COOKIE_ECHOED) {
sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNREFUSED));
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(SCTP_ERROR_PROTO_VIOLATION));
} else {
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNABORTED));
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_PROTO_VIOLATION));
SCTP_DEC_STATS(SCTP_MIB_CURRESTAB);
@@ -4034,6 +4043,8 @@
* TCB. This is a departure from our typical NOMEM handling.
*/
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNABORTED));
/* Delete the established association. */
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_USER_ABORT));
@@ -4175,6 +4186,8 @@
* TCB. This is a departure from our typical NOMEM handling.
*/
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNREFUSED));
/* Delete the established association. */
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(SCTP_ERROR_USER_ABORT));
@@ -4543,6 +4556,8 @@
struct sctp_transport *transport = arg;
if (asoc->overall_error_count >= asoc->max_retrans) {
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -4662,6 +4677,8 @@
SCTP_DEBUG_PRINTK("Giving up on INIT, attempts: %d"
" max_init_attempts: %d\n",
attempts, asoc->max_init_attempts);
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
return SCTP_DISPOSITION_DELETE_TCB;
@@ -4711,6 +4728,8 @@
sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
} else {
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
return SCTP_DISPOSITION_DELETE_TCB;
@@ -4742,6 +4761,8 @@
SCTP_DEBUG_PRINTK("Timer T2 expired.\n");
if (asoc->overall_error_count >= asoc->max_retrans) {
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
/* Note: CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -4817,6 +4838,8 @@
if (asoc->overall_error_count >= asoc->max_retrans) {
sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -4870,6 +4893,8 @@
goto nomem;
sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -5309,6 +5334,8 @@
* processing the rest of the chunks in the packet.
*/
sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ECONNABORTED));
sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
SCTP_U32(SCTP_ERROR_NO_DATA));
SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index b6e4b89..174d4d3 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1057,6 +1057,7 @@
inet_sk(sk)->dport = htons(asoc->peer.port);
af = sctp_get_af_specific(to.sa.sa_family);
af->to_sk_daddr(&to, sk);
+ sk->sk_err = 0;
timeo = sock_sndtimeo(sk, sk->sk_socket->file->f_flags & O_NONBLOCK);
err = sctp_wait_for_connect(asoc, &timeo);
@@ -1228,7 +1229,7 @@
ep = sctp_sk(sk)->ep;
- /* Walk all associations on a socket, not on an endpoint. */
+ /* Walk all associations on an endpoint. */
list_for_each_safe(pos, temp, &ep->asocs) {
asoc = list_entry(pos, struct sctp_association, asocs);
@@ -1241,13 +1242,13 @@
if (sctp_state(asoc, CLOSED)) {
sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ continue;
+ }
+ }
- } else if (sock_flag(sk, SOCK_LINGER) &&
- !sk->sk_lingertime)
- sctp_primitive_ABORT(asoc, NULL);
- else
- sctp_primitive_SHUTDOWN(asoc, NULL);
- } else
+ if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)
+ sctp_primitive_ABORT(asoc, NULL);
+ else
sctp_primitive_SHUTDOWN(asoc, NULL);
}
@@ -5317,6 +5318,7 @@
*/
sctp_release_sock(sk);
current_timeo = schedule_timeout(current_timeo);
+ BUG_ON(sk != asoc->base.sk);
sctp_lock_sock(sk);
*timeo_p = current_timeo;
@@ -5604,12 +5606,14 @@
*/
newsp->type = type;
- spin_lock_bh(&oldsk->sk_lock.slock);
- /* Migrate the backlog from oldsk to newsk. */
- sctp_backlog_migrate(assoc, oldsk, newsk);
- /* Migrate the association to the new socket. */
+ /* Mark the new socket "in-use" by the user so that any packets
+ * that may arrive on the association after we've moved it are
+ * queued to the backlog. This prevents a potential race between
+ * backlog processing on the old socket and new-packet processing
+ * on the new socket.
+ */
+ sctp_lock_sock(newsk);
sctp_assoc_migrate(assoc, newsk);
- spin_unlock_bh(&oldsk->sk_lock.slock);
/* If the association on the newsk is already closed before accept()
* is called, set RCV_SHUTDOWN flag.
@@ -5618,6 +5622,7 @@
newsk->sk_shutdown |= RCV_SHUTDOWN;
newsk->sk_state = SCTP_SS_ESTABLISHED;
+ sctp_release_sock(newsk);
}
/* This proto struct describes the ULP interface for SCTP. */
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 3ac4193..7026b08 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -159,6 +159,7 @@
detail->update(tmp, new);
tmp->next = *head;
*head = tmp;
+ detail->entries++;
cache_get(tmp);
is_new = cache_fresh_locked(tmp, new->expiry_time);
cache_fresh_locked(old, 0);
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index b549710..891a609 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -62,7 +62,7 @@
case IPPROTO_COMP:
if (!pskb_may_pull(skb, sizeof(struct ip_comp_hdr)))
return -EINVAL;
- *spi = ntohl(ntohs(*(u16*)(skb->h.raw + 2)));
+ *spi = htonl(ntohs(*(u16*)(skb->h.raw + 2)));
*seq = 0;
return 0;
default:
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 6d04504..d0f86ed 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -697,29 +697,79 @@
/* Walk through all sections */
for (i = 0; i < hdr->e_shnum; i++) {
- Elf_Rela *rela;
- Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
- Elf_Rela *stop = (void*)start + sechdrs[i].sh_size;
- const char *name = secstrings + sechdrs[i].sh_name +
- strlen(".rela");
+ const char *name = secstrings + sechdrs[i].sh_name;
+ const char *secname;
+ Elf_Rela r;
+ unsigned int r_sym;
/* We want to process only relocation sections and not .init */
- if (section_ref_ok(name) || (sechdrs[i].sh_type != SHT_RELA))
- continue;
-
- for (rela = start; rela < stop; rela++) {
- Elf_Rela r;
- const char *secname;
- r.r_offset = TO_NATIVE(rela->r_offset);
- r.r_info = TO_NATIVE(rela->r_info);
- r.r_addend = TO_NATIVE(rela->r_addend);
- sym = elf->symtab_start + ELF_R_SYM(r.r_info);
- /* Skip special sections */
- if (sym->st_shndx >= SHN_LORESERVE)
+ if (sechdrs[i].sh_type == SHT_RELA) {
+ Elf_Rela *rela;
+ Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
+ Elf_Rela *stop = (void*)start + sechdrs[i].sh_size;
+ name += strlen(".rela");
+ if (section_ref_ok(name))
continue;
- secname = secstrings + sechdrs[sym->st_shndx].sh_name;
- if (section(secname))
- warn_sec_mismatch(modname, name, elf, sym, r);
+ for (rela = start; rela < stop; rela++) {
+ r.r_offset = TO_NATIVE(rela->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+ if (hdr->e_machine == EM_MIPS) {
+ r_sym = ELF64_MIPS_R_SYM(rela->r_info);
+ r_sym = TO_NATIVE(r_sym);
+ } else {
+ r.r_info = TO_NATIVE(rela->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+ }
+#else
+ r.r_info = TO_NATIVE(rela->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+#endif
+ r.r_addend = TO_NATIVE(rela->r_addend);
+ sym = elf->symtab_start + r_sym;
+ /* Skip special sections */
+ if (sym->st_shndx >= SHN_LORESERVE)
+ continue;
+
+ secname = secstrings +
+ sechdrs[sym->st_shndx].sh_name;
+ if (section(secname))
+ warn_sec_mismatch(modname, name,
+ elf, sym, r);
+ }
+ } else if (sechdrs[i].sh_type == SHT_REL) {
+ Elf_Rel *rel;
+ Elf_Rel *start = (void *)hdr + sechdrs[i].sh_offset;
+ Elf_Rel *stop = (void*)start + sechdrs[i].sh_size;
+ name += strlen(".rel");
+ if (section_ref_ok(name))
+ continue;
+
+ for (rel = start; rel < stop; rel++) {
+ r.r_offset = TO_NATIVE(rel->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+ if (hdr->e_machine == EM_MIPS) {
+ r_sym = ELF64_MIPS_R_SYM(rel->r_info);
+ r_sym = TO_NATIVE(r_sym);
+ } else {
+ r.r_info = TO_NATIVE(rel->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+ }
+#else
+ r.r_info = TO_NATIVE(rel->r_info);
+ r_sym = ELF_R_SYM(r.r_info);
+#endif
+ r.r_addend = 0;
+ sym = elf->symtab_start + r_sym;
+ /* Skip special sections */
+ if (sym->st_shndx >= SHN_LORESERVE)
+ continue;
+
+ secname = secstrings +
+ sechdrs[sym->st_shndx].sh_name;
+ if (section(secname))
+ warn_sec_mismatch(modname, name,
+ elf, sym, r);
+ }
}
}
}
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index b14255c..861d866 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -21,6 +21,7 @@
#define ELF_ST_BIND ELF32_ST_BIND
#define ELF_ST_TYPE ELF32_ST_TYPE
+#define Elf_Rel Elf32_Rel
#define Elf_Rela Elf32_Rela
#define ELF_R_SYM ELF32_R_SYM
#define ELF_R_TYPE ELF32_R_TYPE
@@ -34,11 +35,31 @@
#define ELF_ST_BIND ELF64_ST_BIND
#define ELF_ST_TYPE ELF64_ST_TYPE
+#define Elf_Rel Elf64_Rel
#define Elf_Rela Elf64_Rela
#define ELF_R_SYM ELF64_R_SYM
#define ELF_R_TYPE ELF64_R_TYPE
#endif
+/* The 64-bit MIPS ELF ABI uses an unusual reloc format. */
+typedef struct
+{
+ Elf32_Word r_sym; /* Symbol index */
+ unsigned char r_ssym; /* Special symbol for 2nd relocation */
+ unsigned char r_type3; /* 3rd relocation type */
+ unsigned char r_type2; /* 2nd relocation type */
+ unsigned char r_type1; /* 1st relocation type */
+} _Elf64_Mips_R_Info;
+
+typedef union
+{
+ Elf64_Xword r_info_number;
+ _Elf64_Mips_R_Info r_info_fields;
+} _Elf64_Mips_R_Info_union;
+
+#define ELF64_MIPS_R_SYM(i) \
+ ((__extension__ (_Elf64_Mips_R_Info_union)(i)).r_info_fields.r_sym)
+
#if KERNEL_ELFDATA != HOST_ELFDATA
static inline void __endian(const void *src, void *dest, unsigned int size)
@@ -48,8 +69,6 @@
((unsigned char*)dest)[i] = ((unsigned char*)src)[size - i-1];
}
-
-
#define TO_NATIVE(x) \
({ \
typeof(x) __x; \
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d987048..21dad41 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3231,7 +3231,7 @@
goto out;
/* Handle mapped IPv4 packets arriving via IPv6 sockets */
- if (family == PF_INET6 && skb->protocol == ntohs(ETH_P_IP))
+ if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP))
family = PF_INET;
read_lock_bh(&sk->sk_callback_lock);
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index da7ef26..77b0600 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -151,7 +151,7 @@
MODULE_DEVICE_TABLE(pnp, snd_mpu401_pnpids);
-static int __init snd_mpu401_pnp(int dev, struct pnp_dev *device,
+static int __devinit snd_mpu401_pnp(int dev, struct pnp_dev *device,
const struct pnp_device_id *id)
{
if (!pnp_port_valid(device, 0) ||
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index a36ec1d..e6945db 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -85,6 +85,8 @@
#include <linux/pnp.h>
#include <linux/isapnp.h>
#include <linux/moduleparam.h>
+#include <linux/delay.h>
+
#include <asm/io.h>
#include <asm/dma.h>
#include <sound/core.h>
diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c
index 49796be..e04fa49 100644
--- a/sound/oss/ad1848.c
+++ b/sound/oss/ad1848.c
@@ -2026,7 +2026,8 @@
if (irq > 0)
{
devc->dev_no = my_dev;
- if (request_irq(devc->irq, adintr, 0, devc->name, (void *)my_dev) < 0)
+ if (request_irq(devc->irq, adintr, 0, devc->name,
+ (void *)(long)my_dev) < 0)
{
printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
/* Don't free it either then.. */
@@ -2175,7 +2176,7 @@
if (!share_dma)
{
if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
- free_irq(devc->irq, (void *)devc->dev_no);
+ free_irq(devc->irq, (void *)(long)devc->dev_no);
sound_free_dma(dma_playback);
@@ -2204,7 +2205,7 @@
unsigned char c930_stat = 0;
int cnt = 0;
- dev = (int)dev_id;
+ dev = (long)dev_id;
devc = (ad1848_info *) audio_devs[dev]->devc;
interrupt_again: /* Jump back here if int status doesn't reset */
@@ -2900,7 +2901,8 @@
return(dev);
}
-static struct pnp_dev *ad1848_init_generic(struct pnp_card *bus, struct address_info *hw_config, int slot)
+static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus,
+ struct address_info *hw_config, int slot)
{
/* Configure Audio device */
diff --git a/sound/oss/nm256_audio.c b/sound/oss/nm256_audio.c
index 7de079b..6e662ac 100644
--- a/sound/oss/nm256_audio.c
+++ b/sound/oss/nm256_audio.c
@@ -960,7 +960,7 @@
/* Installs the AC97 mixer into CARD. */
-static int __init
+static int __devinit
nm256_install_mixer (struct nm256_info *card)
{
int mixer;
@@ -995,7 +995,7 @@
* RAM.
*/
-static void __init
+static void __devinit
nm256_peek_for_sig (struct nm256_info *card)
{
u32 port1offset
@@ -1056,7 +1056,7 @@
card->playing = 0;
card->recording = 0;
card->rev = rev;
- spin_lock_init(&card->lock);
+ spin_lock_init(&card->lock);
/* Init the memory port info. */
for (x = 0; x < 2; x++) {
