Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c: Fix OMAP clock prescaler to match the comment
i2c: Refactor a kfree in i2c-dev
i2c: Fix return value check in i2c-dev
i2c: Enable PEC on more i2c-i801 devices
i2c: Discard the i2c algo del_bus wrappers
i2c: New ARM Versatile/Realview bus driver
i2c: fix broken ds1337 initialization
i2c: i2c-i801 documentation update
i2c: Use the __ATTR macro where possible
i2c: Whitespace cleanups
i2c: Use put_user instead of copy_to_user where possible
i2c: New Atmel AT91 bus driver
i2c: Add support for nested i2c bus locking
i2c: Cleanups to the i2c-nforce2 bus driver
i2c: Add request/release_mem_region to i2c-ibm_iic bus driver
i2c: New Philips PNX bus driver
i2c: Delete the broken i2c-ite bus driver
i2c: Update the list of driver IDs
i2c: Fix documentation typos
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 46f2a55..031029e 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -216,17 +216,6 @@
---------------------------
-What: i2c-ite and i2c-algo-ite drivers
-When: September 2006
-Why: These drivers never compiled since they were added to the kernel
- tree 5 years ago. This feature removal can be reevaluated if
- someone shows interest in the drivers, fixes them and takes over
- maintenance.
- http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: Bridge netfilter deferred IPv4/IPv6 output hook calling
When: January 2007
Why: The deferred output hooks are a layering violation causing unusual
diff --git a/Documentation/i2c/busses/i2c-amd8111 b/Documentation/i2c/busses/i2c-amd8111
index db294ee..460dd66 100644
--- a/Documentation/i2c/busses/i2c-amd8111
+++ b/Documentation/i2c/busses/i2c-amd8111
@@ -5,7 +5,7 @@
Datasheets:
AMD datasheet not yet available, but almost everything can be found
- in publically available ACPI 2.0 specification, which the adapter
+ in the publicly available ACPI 2.0 specification, which the adapter
follows.
Author: Vojtech Pavlik <vojtech@suse.cz>
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index e46c234..3db69a0 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -9,7 +9,10 @@
* Intel 82801EB/ER (ICH5) (HW PEC supported, 32 byte buffer not supported)
* Intel 6300ESB
* Intel 82801FB/FR/FW/FRW (ICH6)
- * Intel ICH7
+ * Intel 82801G (ICH7)
+ * Intel 631xESB/632xESB (ESB2)
+ * Intel 82801H (ICH8)
+ * Intel ICH9
Datasheets: Publicly available at the Intel website
Authors:
diff --git a/Documentation/i2c/busses/i2c-nforce2 b/Documentation/i2c/busses/i2c-nforce2
index cd49c42..7f61fbc 100644
--- a/Documentation/i2c/busses/i2c-nforce2
+++ b/Documentation/i2c/busses/i2c-nforce2
@@ -10,11 +10,11 @@
* nForce4 MCP51 10de:0264
* nForce4 MCP55 10de:0368
-Datasheet: not publically available, but seems to be similar to the
+Datasheet: not publicly available, but seems to be similar to the
AMD-8111 SMBus 2.0 adapter.
Authors:
- Hans-Frieder Vogt <hfvogt@arcor.de>,
+ Hans-Frieder Vogt <hfvogt@gmx.net>,
Thomas Leibold <thomas@plx.com>,
Patrick Dreker <patrick@dreker.de>
@@ -38,7 +38,7 @@
-----
The SMBus adapter in the nForce2 chipset seems to be very similar to the
-SMBus 2.0 adapter in the AMD-8111 southbridge. However, I could only get
+SMBus 2.0 adapter in the AMD-8111 south bridge. However, I could only get
the driver to work with direct I/O access, which is different to the EC
interface of the AMD-8111. Tested on Asus A7N8X. The ACPI DSDT table of the
Asus A7N8X lists two SMBuses, both of which are supported by this driver.
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
index b457ca0..777564c 100644
--- a/arch/arm/mach-pnx4008/Makefile
+++ b/arch/arm/mach-pnx4008/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o
+obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
new file mode 100644
index 0000000..6f30882
--- /dev/null
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -0,0 +1,167 @@
+/*
+ * I2C initialization for PNX4008.
+ *
+ * Author: Vitaly Wool <vitalywool@gmail.com>
+ *
+ * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pnx.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/i2c.h>
+
+static int set_clock_run(struct platform_device *pdev)
+{
+ struct clk *clk;
+ char name[10];
+ int retval = 0;
+
+ snprintf(name, 10, "i2c%d_ck", pdev->id);
+ clk = clk_get(&pdev->dev, name);
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 1);
+ clk_put(clk);
+ } else
+ retval = -ENOENT;
+
+ return retval;
+}
+
+static int set_clock_stop(struct platform_device *pdev)
+{
+ struct clk *clk;
+ char name[10];
+ int retval = 0;
+
+ snprintf(name, 10, "i2c%d_ck", pdev->id);
+ clk = clk_get(&pdev->dev, name);
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 0);
+ clk_put(clk);
+ } else
+ retval = -ENOENT;
+
+ return retval;
+}
+
+static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int retval = 0;
+#ifdef CONFIG_PM
+ retval = set_clock_run(pdev);
+#endif
+ return retval;
+}
+
+static int i2c_pnx_resume(struct platform_device *pdev)
+{
+ int retval = 0;
+#ifdef CONFIG_PM
+ retval = set_clock_run(pdev);
+#endif
+ return retval;
+}
+
+static u32 calculate_input_freq(struct platform_device *pdev)
+{
+ return HCLK_MHZ;
+}
+
+
+static struct i2c_pnx_algo_data pnx_algo_data0 = {
+ .base = PNX4008_I2C1_BASE,
+ .irq = I2C_1_INT,
+};
+
+static struct i2c_pnx_algo_data pnx_algo_data1 = {
+ .base = PNX4008_I2C2_BASE,
+ .irq = I2C_2_INT,
+};
+
+static struct i2c_pnx_algo_data pnx_algo_data2 = {
+ .base = (PNX4008_USB_CONFIG_BASE + 0x300),
+ .irq = USB_I2C_INT,
+};
+
+static struct i2c_adapter pnx_adapter0 = {
+ .name = I2C_CHIP_NAME "0",
+ .algo_data = &pnx_algo_data0,
+};
+static struct i2c_adapter pnx_adapter1 = {
+ .name = I2C_CHIP_NAME "1",
+ .algo_data = &pnx_algo_data1,
+};
+
+static struct i2c_adapter pnx_adapter2 = {
+ .name = "USB-I2C",
+ .algo_data = &pnx_algo_data2,
+};
+
+static struct i2c_pnx_data i2c0_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter0,
+};
+
+static struct i2c_pnx_data i2c1_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter1,
+};
+
+static struct i2c_pnx_data i2c2_data = {
+ .suspend = i2c_pnx_suspend,
+ .resume = i2c_pnx_resume,
+ .calculate_input_freq = calculate_input_freq,
+ .set_clock_run = set_clock_run,
+ .set_clock_stop = set_clock_stop,
+ .adapter = &pnx_adapter2,
+};
+
+static struct platform_device i2c0_device = {
+ .name = "pnx-i2c",
+ .id = 0,
+ .dev = {
+ .platform_data = &i2c0_data,
+ },
+};
+
+static struct platform_device i2c1_device = {
+ .name = "pnx-i2c",
+ .id = 1,
+ .dev = {
+ .platform_data = &i2c1_data,
+ },
+};
+
+static struct platform_device i2c2_device = {
+ .name = "pnx-i2c",
+ .id = 2,
+ .dev = {
+ .platform_data = &i2c2_data,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &i2c0_device,
+ &i2c1_device,
+ &i2c2_device,
+};
+
+void __init pnx4008_register_i2c_devices(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 68c6705..84d3fe7 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -141,6 +141,19 @@
.resource = realview_smc91x_resources,
};
+static struct resource realview_i2c_resource = {
+ .start = REALVIEW_I2C_BASE,
+ .end = REALVIEW_I2C_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device realview_i2c_device = {
+ .name = "versatile-i2c",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &realview_i2c_resource,
+};
+
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 93e86d9..2b53420 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -108,6 +108,7 @@
extern struct platform_device realview_flash_device;
extern struct platform_device realview_smc91x_device;
+extern struct platform_device realview_i2c_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clk realview_clcd_clk;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 84a9595..9741b4d 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -155,6 +155,7 @@
platform_device_register(&realview_flash_device);
platform_device_register(&realview_smc91x_device);
+ platform_device_register(&realview_i2c_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 5719694..bf71507 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -325,6 +325,19 @@
.resource = smc91x_resources,
};
+static struct resource versatile_i2c_resource = {
+ .start = VERSATILE_I2C_BASE,
+ .end = VERSATILE_I2C_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device versatile_i2c_device = {
+ .name = "versatile-i2c",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &versatile_i2c_resource,
+};
+
#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
unsigned int mmc_status(struct device *dev)
@@ -775,6 +788,7 @@
clk_register(&versatile_clcd_clk);
platform_device_register(&versatile_flash_device);
+ platform_device_register(&versatile_i2c_device);
platform_device_register(&smc91x_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
diff --git a/drivers/acorn/char/i2c.c b/drivers/acorn/char/i2c.c
index bdb9c8b..9e584a7 100644
--- a/drivers/acorn/char/i2c.c
+++ b/drivers/acorn/char/i2c.c
@@ -360,7 +360,7 @@
if (ret >= 0){
ret = misc_register(&rtc_dev);
if(ret < 0)
- i2c_bit_del_bus(&ioc_ops);
+ i2c_del_adapter(&ioc_ops);
}
return ret;
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index c034820..af02034 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -38,17 +38,6 @@
This support is also available as a module. If so, the module
will be called i2c-algo-pca.
-config I2C_ALGOITE
- tristate "ITE I2C Algorithm"
- depends on MIPS_ITE8172 && I2C
- help
- This supports the use of the ITE8172 I2C interface found on some MIPS
- systems. Say Y if you have one of these. You should also say Y for
- the ITE I2C peripheral driver support below.
-
- This support is also available as a module. If so, the module
- will be called i2c-algo-ite.
-
config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 208be04..cac1051 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o
-obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o
ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 21c36bf..95aa539 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -540,15 +540,7 @@
return i2c_add_adapter(adap);
}
-
-
-int i2c_bit_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_bit_add_bus);
-EXPORT_SYMBOL(i2c_bit_del_bus);
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm");
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c
deleted file mode 100644
index 70d8eef..0000000
--- a/drivers/i2c/algos/i2c-algo-ite.c
+++ /dev/null
@@ -1,806 +0,0 @@
-/*
- -------------------------------------------------------------------------
- i2c-algo-ite.c i2c driver algorithms for ITE adapters
-
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2000 MontaVista Software Inc.
-
- ---------------------------------------------------------------------------
- This file was highly leveraged from i2c-algo-pcf.c, which was created
- by Simon G. Vogl and Hans Berglund:
-
-
- Copyright (C) 1995-1997 Simon G. Vogl
- 1998-2000 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
- Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
- <mbailey@littlefeet-inc.com> */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include "i2c-algo-ite.h"
-
-#define PM_DSR IT8172_PCI_IO_BASE + IT_PM_DSR
-#define PM_IBSR IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04
-#define GPIO_CCR IT8172_PCI_IO_BASE + IT_GPCCR
-
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEF_TIMEOUT 16
-
-
-/* module parameters:
- */
-static int i2c_debug;
-static int iic_test; /* see if the line-setting functions work */
-
-/* --- setting states on the bus with the right timing: --------------- */
-
-#define get_clock(adap) adap->getclock(adap->data)
-#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val)
-#define iic_inw(adap, reg) adap->getiic(adap->data, reg)
-
-
-/* --- other auxiliary functions -------------------------------------- */
-
-static void iic_start(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap,ITE_I2CHCR,ITE_CMD);
-}
-
-static void iic_stop(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap,ITE_I2CHCR,0);
- iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI);
-}
-
-static void iic_reset(struct i2c_algo_iic_data *adap)
-{
- iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80);
-}
-
-
-static int wait_for_bb(struct i2c_algo_iic_data *adap)
-{
- int timeout = DEF_TIMEOUT;
- short status;
-
- status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
- while (timeout-- && (status & ITE_I2CHSR_HB)) {
- udelay(1000); /* How much is this? */
- status = iic_inw(adap, ITE_I2CHSR);
- }
-#endif
- if (timeout<=0) {
- printk(KERN_ERR "Timeout, host is busy\n");
- iic_reset(adap);
- }
- return(timeout<=0);
-}
-
-/* After we issue a transaction on the IIC bus, this function
- * is called. It puts this process to sleep until we get an interrupt from
- * from the controller telling us that the transaction we requested in complete.
- */
-static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) {
-
- int timeout = DEF_TIMEOUT;
-
- timeout = wait_for_bb(adap);
- if (timeout) {
- DEB2(printk("Timeout waiting for host not busy\n");)
- return -EIO;
- }
- timeout = DEF_TIMEOUT;
-
- *status = iic_inw(adap, ITE_I2CHSR);
-#ifndef STUB_I2C
- while (timeout-- && !(*status & ITE_I2CHSR_TDI)) {
- adap->waitforpin();
- *status = iic_inw(adap, ITE_I2CHSR);
- }
-#endif
- if (timeout <= 0)
- return(-1);
- else
- return(0);
-}
-
-static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status)
-{
- int timeout = DEF_TIMEOUT;
-
- *status = iic_inw(adap, ITE_I2CFSR);
-#ifndef STUB_I2C
- while (timeout-- && (*status & ITE_I2CFSR_FE)) {
- udelay(1000);
- iic_inw(adap, ITE_I2CFSR);
- }
-#endif
- if (timeout <= 0)
- return(-1);
- else
- return(0);
-}
-
-static int iic_init (struct i2c_algo_iic_data *adap)
-{
- short i;
-
- /* Clear bit 7 to set I2C to normal operation mode */
- i=iic_inw(adap, PM_DSR)& 0xff7f;
- iic_outw(adap, PM_DSR, i);
-
- /* set IT_GPCCR port C bit 2&3 as function 2 */
- i = iic_inw(adap, GPIO_CCR) & 0xfc0f;
- iic_outw(adap,GPIO_CCR,i);
-
- /* Clear slave address/sub-address */
- iic_outw(adap,ITE_I2CSAR, 0);
- iic_outw(adap,ITE_I2CSSAR, 0);
-
- /* Set clock counter register */
- iic_outw(adap,ITE_I2CCKCNT, get_clock(adap));
-
- /* Set START/reSTART/STOP time registers */
- iic_outw(adap,ITE_I2CSHDR, 0x0a);
- iic_outw(adap,ITE_I2CRSUR, 0x0a);
- iic_outw(adap,ITE_I2CPSUR, 0x0a);
-
- /* Enable interrupts on completing the current transaction */
- iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE);
-
- /* Clear transfer count */
- iic_outw(adap,ITE_I2CFBCR, 0x0);
-
- DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n",
- iic_inw(adap, ITE_I2CHSR)));
- return 0;
-}
-
-
-/*
- * Sanity check for the adapter hardware - check the reaction of
- * the bus lines only if it seems to be idle.
- */
-static int test_bus(struct i2c_algo_iic_data *adap, char *name) {
-#if 0
- int scl,sda;
- sda=getsda(adap);
- if (adap->getscl==NULL) {
- printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n");
- return 0;
- }
- scl=getscl(adap);
- printk("test_bus: Adapter: %s scl: %d sda: %d -- testing...\n",
- name,getscl(adap),getsda(adap));
- if (!scl || !sda ) {
- printk("test_bus: %s seems to be busy.\n",adap->name);
- goto bailout;
- }
- sdalo(adap);
- printk("test_bus:1 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 != getsda(adap) ) {
- printk("test_bus: %s SDA stuck high!\n",name);
- sdahi(adap);
- goto bailout;
- }
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL unexpected low while pulling SDA low!\n",
- name);
- goto bailout;
- }
- sdahi(adap);
- printk("test_bus:2 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA stuck low!\n",name);
- sdahi(adap);
- goto bailout;
- }
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL unexpected low while SDA high!\n",
- adap->name);
- goto bailout;
- }
- scllo(adap);
- printk("test_bus:3 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 != getscl(adap) ) {
-
- sclhi(adap);
- goto bailout;
- }
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA unexpected low while pulling SCL low!\n",
- name);
- goto bailout;
- }
- sclhi(adap);
- printk("test_bus:4 scl: %d sda: %d\n", getscl(adap),
- getsda(adap));
- if ( 0 == getscl(adap) ) {
- printk("test_bus: %s SCL stuck low!\n",name);
- sclhi(adap);
- goto bailout;
- }
- if ( 0 == getsda(adap) ) {
- printk("test_bus: %s SDA unexpected low while SCL high!\n",
- name);
- goto bailout;
- }
- printk("test_bus: %s passed test.\n",name);
- return 0;
-bailout:
- sdahi(adap);
- sclhi(adap);
- return -ENODEV;
-#endif
- return (0);
-}
-
-/* ----- Utility functions
- */
-
-
-/* Verify the device we want to talk to on the IIC bus really exists. */
-static inline int try_address(struct i2c_algo_iic_data *adap,
- unsigned int addr, int retries)
-{
- int i, ret = -1;
- short status;
-
- for (i=0;i<retries;i++) {
- iic_outw(adap, ITE_I2CSAR, addr);
- iic_start(adap);
- if (wait_for_pin(adap, &status) == 0) {
- if ((status & ITE_I2CHSR_DNE) == 0) {
- iic_stop(adap);
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
- ret=1;
- break; /* success! */
- }
- }
- iic_stop(adap);
- udelay(adap->udelay);
- }
- DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i,
- addr));
- return ret;
-}
-
-
-static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf,
- int count)
-{
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- int wrcount=0, timeout;
- short status;
- int loops, remainder, i, j;
- union {
- char byte[2];
- unsigned short word;
- } tmp;
-
- iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]);
- count--;
- if (count == 0)
- return -EIO;
-
- loops = count / 32; /* 32-byte FIFO */
- remainder = count % 32;
-
- if(loops) {
- for(i=0; i<loops; i++) {
-
- iic_outw(adap, ITE_I2CFBCR, 32);
- for(j=0; j<32/2; j++) {
- tmp.byte[1] = buf[wrcount++];
- tmp.byte[0] = buf[wrcount++];
- iic_outw(adap, ITE_I2CFDR, tmp.word);
- }
-
- /* status FIFO overrun */
- iic_inw(adap, ITE_I2CFSR);
- iic_inw(adap, ITE_I2CFBCR);
-
- iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */
-
- /* Wait for transmission to complete */
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
- }
- }
- if(remainder) {
- iic_outw(adap, ITE_I2CFBCR, remainder);
- for(i=0; i<remainder/2; i++) {
- tmp.byte[1] = buf[wrcount++];
- tmp.byte[0] = buf[wrcount++];
- iic_outw(adap, ITE_I2CFDR, tmp.word);
- }
-
- /* status FIFO overrun */
- iic_inw(adap, ITE_I2CFSR);
- iic_inw(adap, ITE_I2CFBCR);
-
- iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name);
- return -EREMOTEIO; /* got a better one ?? */
- }
-#endif
- }
- iic_stop(adap);
- return wrcount;
-}
-
-
-static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count,
- int sread)
-{
- int rdcount=0, i, timeout;
- short status;
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- int loops, remainder, j;
- union {
- char byte[2];
- unsigned short word;
- } tmp;
-
- loops = count / 32; /* 32-byte FIFO */
- remainder = count % 32;
-
- if(loops) {
- for(i=0; i<loops; i++) {
- iic_outw(adap, ITE_I2CFBCR, 32);
- if (sread)
- iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
- else
- iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s read timeout.\n", i2c_adap->name);
- return (-1);
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
- return (-1);
- }
-#endif
-
- timeout = wait_for_fe(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name);
- return (-1);
- }
-
- for(j=0; j<32/2; j++) {
- tmp.word = iic_inw(adap, ITE_I2CFDR);
- buf[rdcount++] = tmp.byte[1];
- buf[rdcount++] = tmp.byte[0];
- }
-
- /* status FIFO underrun */
- iic_inw(adap, ITE_I2CFSR);
-
- }
- }
-
-
- if(remainder) {
- remainder=(remainder+1)/2 * 2;
- iic_outw(adap, ITE_I2CFBCR, remainder);
- if (sread)
- iic_outw(adap, ITE_I2CHCR, ITE_SREAD);
- else
- iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */
-
- timeout = wait_for_pin(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s read timeout.\n", i2c_adap->name);
- return (-1);
- }
-#ifndef STUB_I2C
- if (status & ITE_I2CHSR_DB) {
- iic_stop(adap);
- printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name);
- return (-1);
- }
-#endif
- timeout = wait_for_fe(adap, &status);
- if(timeout) {
- iic_stop(adap);
- printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name);
- return (-1);
- }
-
- for(i=0; i<(remainder+1)/2; i++) {
- tmp.word = iic_inw(adap, ITE_I2CFDR);
- buf[rdcount++] = tmp.byte[1];
- buf[rdcount++] = tmp.byte[0];
- }
-
- /* status FIFO underrun */
- iic_inw(adap, ITE_I2CFSR);
-
- }
-
- iic_stop(adap);
- return rdcount;
-}
-
-
-/* This function implements combined transactions. Combined
- * transactions consist of combinations of reading and writing blocks of data.
- * Each transfer (i.e. a read or a write) is separated by a repeated start
- * condition.
- */
-#if 0
-static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
-{
- int i;
- struct i2c_msg *pmsg;
- int ret;
-
- DEB2(printk("Beginning combined transaction\n"));
-
- for(i=0; i<(num-1); i++) {
- pmsg = &msgs[i];
- if(pmsg->flags & I2C_M_RD) {
- DEB2(printk(" This one is a read\n"));
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
- }
- else if(!(pmsg->flags & I2C_M_RD)) {
- DEB2(printk("This one is a write\n"));
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER);
- }
- }
- /* Last read or write segment needs to be terminated with a stop */
- pmsg = &msgs[i];
-
- if(pmsg->flags & I2C_M_RD) {
- DEB2(printk("Doing the last read\n"));
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
- }
- else if(!(pmsg->flags & I2C_M_RD)) {
- DEB2(printk("Doing the last write\n"));
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER);
- }
-
- return ret;
-}
-#endif
-
-
-/* Whenever we initiate a transaction, the first byte clocked
- * onto the bus after the start condition is the address (7 bit) of the
- * device we want to talk to. This function manipulates the address specified
- * so that it makes sense to the hardware when written to the IIC peripheral.
- *
- * Note: 10 bit addresses are not supported in this driver, although they are
- * supported by the hardware. This functionality needs to be implemented.
- */
-static inline int iic_doAddress(struct i2c_algo_iic_data *adap,
- struct i2c_msg *msg, int retries)
-{
- unsigned short flags = msg->flags;
- unsigned int addr;
- int ret;
-
-/* Ten bit addresses not supported right now */
- if ( (flags & I2C_M_TEN) ) {
-#if 0
- addr = 0xf0 | (( msg->addr >> 7) & 0x03);
- DEB2(printk("addr0: %d\n",addr));
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at extended address code.\n");
- return -EREMOTEIO;
- }
- iic_outw(adap,msg->addr & 0x7f);
- if (ret != 1) {
- printk("iic_doAddress: died at 2nd address code.\n");
- return -EREMOTEIO;
- }
- if ( flags & I2C_M_RD ) {
- i2c_repstart(adap);
- addr |= 0x01;
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at extended address code.\n");
- return -EREMOTEIO;
- }
- }
-#endif
- } else {
-
- addr = ( msg->addr << 1 );
-
-#if 0
- if (flags & I2C_M_RD )
- addr |= 1;
- if (flags & I2C_M_REV_DIR_ADDR )
- addr ^= 1;
-#endif
-
- if (iic_inw(adap, ITE_I2CSAR) != addr) {
- iic_outw(adap, ITE_I2CSAR, addr);
- ret = try_address(adap, addr, retries);
- if (ret!=1) {
- printk("iic_doAddress: died at address code.\n");
- return -EREMOTEIO;
- }
- }
-
- }
-
- return 0;
-}
-
-
-/* Description: Prepares the controller for a transaction (clearing status
- * registers, data buffers, etc), and then calls either iic_readbytes or
- * iic_sendbytes to do the actual transaction.
- *
- * still to be done: Before we issue a transaction, we should
- * verify that the bus is not busy or in some unknown state.
- */
-static int iic_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct i2c_algo_iic_data *adap = i2c_adap->algo_data;
- struct i2c_msg *pmsg;
- int i = 0;
- int ret, timeout;
-
- pmsg = &msgs[i];
-
- if(!pmsg->len) {
- DEB2(printk("iic_xfer: read/write length is 0\n");)
- return -EIO;
- }
- if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) {
- DEB2(printk("iic_xfer: write buffer length is not odd\n");)
- return -EIO;
- }
-
- /* Wait for any pending transfers to complete */
- timeout = wait_for_bb(adap);
- if (timeout) {
- DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");)
- return -EIO;
- }
-
- /* Flush FIFO */
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
- /* Load address */
- ret = iic_doAddress(adap, pmsg, i2c_adap->retries);
- if (ret)
- return -EIO;
-
-#if 0
- /* Combined transaction (read and write) */
- if(num > 1) {
- DEB2(printk("iic_xfer: Call combined transaction\n"));
- ret = iic_combined_transaction(i2c_adap, msgs, num);
- }
-#endif
-
- DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
- i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-
- if(pmsg->flags & I2C_M_RD) /* Read */
- ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0);
- else { /* Write */
- udelay(1000);
- ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len);
- }
-
- if (ret != pmsg->len)
- DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret));
- else
- DEB3(printk("iic_xfer: read/write %d bytes.\n",ret));
-
- return ret;
-}
-
-
-/* Implements device specific ioctls. Higher level ioctls can
- * be found in i2c-core.c and are typical of any i2c controller (specifying
- * slave address, timeouts, etc). These ioctls take advantage of any hardware
- * features built into the controller for which this algorithm-adapter set
- * was written. These ioctls allow you to take control of the data and clock
- * lines and set the either high or low,
- * similar to a GPIO pin.
- */
-static int algo_control(struct i2c_adapter *adapter,
- unsigned int cmd, unsigned long arg)
-{
-
- struct i2c_algo_iic_data *adap = adapter->algo_data;
- struct i2c_iic_msg s_msg;
- char *buf;
- int ret;
-
- if (cmd == I2C_SREAD) {
- if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg,
- sizeof(struct i2c_iic_msg)))
- return -EFAULT;
- buf = kmalloc(s_msg.len, GFP_KERNEL);
- if (buf== NULL)
- return -ENOMEM;
-
- /* Flush FIFO */
- iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH);
-
- /* Load address */
- iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1);
- iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff);
-
- ret = iic_readbytes(adapter, buf, s_msg.len, 1);
- if (ret>=0) {
- if(copy_to_user( s_msg.buf, buf, s_msg.len) )
- ret = -EFAULT;
- }
- kfree(buf);
- }
- return 0;
-}
-
-
-static u32 iic_func(struct i2c_adapter *adap)
-{
- return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_PROTOCOL_MANGLING;
-}
-
-/* -----exported algorithm data: ------------------------------------- */
-
-static struct i2c_algorithm iic_algo = {
- .master_xfer = iic_xfer,
- .algo_control = algo_control, /* ioctl */
- .functionality = iic_func,
-};
-
-
-/*
- * registering functions to load algorithms at runtime
- */
-int i2c_iic_add_bus(struct i2c_adapter *adap)
-{
- struct i2c_algo_iic_data *iic_adap = adap->algo_data;
-
- if (iic_test) {
- int ret = test_bus(iic_adap, adap->name);
- if (ret<0)
- return -ENODEV;
- }
-
- DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n",
- adap->name));
-
- /* register new adapter to i2c module... */
- adap->algo = &iic_algo;
-
- adap->timeout = 100; /* default values, should */
- adap->retries = 3; /* be replaced by defines */
- adap->flags = 0;
-
- iic_init(iic_adap);
- return i2c_add_adapter(adap);
-}
-
-
-int i2c_iic_del_bus(struct i2c_adapter *adap)
-{
- int res;
- if ((res = i2c_del_adapter(adap)) < 0)
- return res;
- DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name));
-
- return 0;
-}
-
-
-int __init i2c_algo_iic_init (void)
-{
- printk(KERN_INFO "ITE iic (i2c) algorithm module\n");
- return 0;
-}
-
-
-void i2c_algo_iic_exit(void)
-{
- return;
-}
-
-
-EXPORT_SYMBOL(i2c_iic_add_bus);
-EXPORT_SYMBOL(i2c_iic_del_bus);
-
-/* The MODULE_* macros resolve to nothing if MODULES is not defined
- * when this file is compiled.
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("ITE iic algorithm");
-MODULE_LICENSE("GPL");
-
-module_param(iic_test, bool, 0);
-module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
-
-MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available");
-MODULE_PARM_DESC(i2c_debug,
- "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
-
-
-/* This function resolves to init_module (the function invoked when a module
- * is loaded via insmod) when this file is compiled with MODULES defined.
- * Otherwise (i.e. if you want this driver statically linked to the kernel),
- * a pointer to this function is stored in a table and called
- * during the initialization of the kernel (in do_basic_setup in /init/main.c)
- *
- * All this functionality is complements of the macros defined in linux/init.h
- */
-module_init(i2c_algo_iic_init);
-
-
-/* If MODULES is defined when this file is compiled, then this function will
- * resolved to cleanup_module.
- */
-module_exit(i2c_algo_iic_exit);
diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h
deleted file mode 100644
index a8ca3c9..0000000
--- a/drivers/i2c/algos/i2c-algo-ite.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- --------------------------------------------------------------------
- i2c-ite.h: Global defines for the I2C controller on board the
- ITE MIPS processor.
- --------------------------------------------------------------------
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2001 MontaVista Software Inc.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef I2C_ITE_H
-#define I2C_ITE_H 1
-
-#include <asm/it8172/it8172.h>
-
-/* I2C Registers */
-#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30
-#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34
-#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38
-#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c
-#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48
-#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c
-#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50
-#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54
-
-#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70
-#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74
-#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78
-#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c
-
-
-/* Host Control Register ITE_I2CHCR */
-#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */
-#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing
- the current transaction */
-#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */
-#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */
-#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */
-#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute
- the command and send the data programmed in
- all required registers to I2C bus */
-#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST
-#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W
-#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R
-#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S
-
-/* Host Status Register ITE_I2CHSR */
-#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except
- in the first and last bytes */
-#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */
-#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */
-#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */
-#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */
-
-/* Slave Address Register ITE_I2CSAR */
-#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */
-#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the
- next slave address is addressed */
-
-/* Slave Sub-address Register ITE_I2CSSAR */
-#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */
-
-/* Clock Counter Register ITE_I2CCKCNT */
-#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */
-#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */
-#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */
-
-/* START Hold Time Register ITE_I2CSHDR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */
-#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */
-
-/* (Repeated) START Setup Time Register ITE_I2CRSUR */
-/* value is counted based on 16 MHz internal clock */
-#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */
-#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */
-
-/* STOP setup Time Register ITE_I2CPSUR */
-
-/* FIFO Data Register ITE_I2CFDR */
-#define ITE_I2CFDR_MASK 0xff
-
-/* FIFO Byte Count Register ITE_I2CFBCR */
-#define ITE_I2CFBCR_MASK 0x3f
-
-/* FIFO Control Register ITE_I2CFCR */
-#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point
- and I2CFSR */
-/* FIFO Status Register ITE_I2CFSR */
-#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */
-#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */
-#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */
-#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */
-
-#endif /* I2C_ITE_H */
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 9081c9f..36fdf97 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -381,14 +381,7 @@
return rval;
}
-
-int i2c_pca_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_pca_add_bus);
-EXPORT_SYMBOL(i2c_pca_del_bus);
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm");
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3b20033..ecb2c2d 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -486,15 +486,7 @@
return rval;
}
-
-
-int i2c_pcf_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_pcf_add_bus);
-EXPORT_SYMBOL(i2c_pcf_del_bus);
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm");
diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c
index 490d999..ac2d505 100644
--- a/drivers/i2c/algos/i2c-algo-sgi.c
+++ b/drivers/i2c/algos/i2c-algo-sgi.c
@@ -171,15 +171,7 @@
return i2c_add_adapter(adap);
}
-
-
-int i2c_sgi_del_bus(struct i2c_adapter *adap)
-{
- return i2c_del_adapter(adap);
-}
-
EXPORT_SYMBOL(i2c_sgi_add_bus);
-EXPORT_SYMBOL(i2c_sgi_del_bus);
MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>");
MODULE_DESCRIPTION("I2C-Bus SGI algorithm");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 90f91d0..e1989f3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -74,6 +74,13 @@
This driver can also be built as a module. If so, the module
will be called i2c-amd8111.
+config I2C_AT91
+ tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
+ depends on I2C && ARCH_AT91 && EXPERIMENTAL
+ help
+ This supports the use of the I2C interface on Atmel AT91
+ processors.
+
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
depends on I2C && (SOC_AU1550 || SOC_AU1200)
@@ -209,18 +216,6 @@
tristate
depends on I2C
-config I2C_ITE
- tristate "ITE I2C Adapter"
- depends on I2C && MIPS_ITE8172
- select I2C_ALGOITE
- help
- This supports the ITE8172 I2C peripheral found on some MIPS
- systems. Say Y if you have one of these. You should also say Y for
- the ITE I2C driver algorithm support above.
-
- This support is also available as a module. If so, the module
- will be called i2c-ite.
-
config I2C_IXP4XX
tristate "IXP4xx GPIO-Based I2C Interface"
depends on I2C && ARCH_IXP4XX
@@ -481,6 +476,17 @@
If you don't know what to do here, definitely say N.
+config I2C_VERSATILE
+ tristate "ARM Versatile/Realview I2C bus support"
+ depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW)
+ select I2C_ALGOBIT
+ help
+ Say yes if you want to support the I2C serial bus on ARMs Versatile
+ range of platforms.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-versatile.
+
config I2C_VIA
tristate "VIA 82C586B"
depends on I2C && PCI && EXPERIMENTAL
@@ -548,4 +554,23 @@
This driver can also be built as a module. If so, the module
will be called i2c-mv64xxx.
+config I2C_PNX
+ tristate "I2C bus support for Philips PNX targets"
+ depends on ARCH_PNX4008 && I2C
+ help
+ This driver supports the Philips IP3204 I2C IP block master and/or
+ slave controller
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-pnx.
+
+config I2C_PNX_EARLY
+ bool "Early initialization for I2C on PNXxxxx"
+ depends on I2C_PNX=y
+ help
+ Under certain circumstances one may need to make sure I2C on PNXxxxx
+ is initialized earlier than some other driver that depends on it
+ (for instance, that might be USB in case of PNX4008). With this
+ option turned on you can guarantee that.
+
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 493c872..37196c1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o
obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o
obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
+obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
@@ -16,7 +17,6 @@
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_ISA) += i2c-isa.o
-obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
@@ -29,6 +29,7 @@
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o
@@ -39,6 +40,7 @@
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_VIA) += i2c-via.o
obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
new file mode 100644
index 0000000..67f91bd
--- /dev/null
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -0,0 +1,325 @@
+/*
+ i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
+
+ Copyright (C) 2004 Rick Bronson
+ Converted to 2.6 by Andrew Victor <andrew@sanpeople.com>
+
+ Borrowed heavily from original work by:
+ Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+*/
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/at91_twi.h>
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+
+#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */
+
+
+static struct clk *twi_clk;
+static void __iomem *twi_base;
+
+#define at91_twi_read(reg) __raw_readl(twi_base + (reg))
+#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg))
+
+
+/*
+ * Initialize the TWI hardware registers.
+ */
+static void __devinit at91_twi_hwinit(void)
+{
+ unsigned long cdiv, ckdiv;
+
+ at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */
+
+ /* Calcuate clock dividers */
+ cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
+ cdiv = cdiv + 1; /* round up */
+ ckdiv = 0;
+ while (cdiv > 255) {
+ ckdiv++;
+ cdiv = cdiv >> 1;
+ }
+
+ if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */
+ if (ckdiv > 5) {
+ printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
+ ckdiv = 5;
+ }
+ }
+
+ at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
+}
+
+/*
+ * Poll the i2c status register until the specified bit is set.
+ * Returns 0 if timed out (100 msec).
+ */
+static short at91_poll_status(unsigned long bit)
+{
+ int loop_cntr = 10000;
+
+ do {
+ udelay(10);
+ } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0));
+
+ return (loop_cntr > 0);
+}
+
+static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ /* Send Start */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
+
+ /* Read data */
+ while (length--) {
+ if (!length) /* need to send Stop before reading last byte */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
+ if (!at91_poll_status(AT91_TWI_RXRDY)) {
+ dev_dbg(&adap->dev, "RXRDY timeout\n");
+ return -ETIMEDOUT;
+ }
+ *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff);
+ }
+
+ return 0;
+}
+
+static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length)
+{
+ /* Load first byte into transmitter */
+ at91_twi_write(AT91_TWI_THR, *buf++);
+
+ /* Send Start */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_START);
+
+ do {
+ if (!at91_poll_status(AT91_TWI_TXRDY)) {
+ dev_dbg(&adap->dev, "TXRDY timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ length--; /* byte was transmitted */
+
+ if (length > 0) /* more data to send? */
+ at91_twi_write(AT91_TWI_THR, *buf++);
+ } while (length);
+
+ /* Send Stop */
+ at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP);
+
+ return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ *
+ * Note: We do not use Atmel's feature of storing the "internal device address".
+ * Instead the "internal device address" has to be written using a seperate
+ * i2c message.
+ * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html
+ */
+static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
+{
+ int i, ret;
+
+ dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
+
+ for (i = 0; i < num; i++) {
+ dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i,
+ pmsg->flags & I2C_M_RD ? "read" : "writ",
+ pmsg->len, pmsg->len > 1 ? "s" : "",
+ pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
+ at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16)
+ | ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0));
+
+ if (pmsg->len && pmsg->buf) { /* sanity check */
+ if (pmsg->flags & I2C_M_RD)
+ ret = xfer_read(adap, pmsg->buf, pmsg->len);
+ else
+ ret = xfer_write(adap, pmsg->buf, pmsg->len);
+
+ if (ret)
+ return ret;
+
+ /* Wait until transfer is finished */
+ if (!at91_poll_status(AT91_TWI_TXCOMP)) {
+ dev_dbg(&adap->dev, "TXCOMP timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ dev_dbg(&adap->dev, "transfer complete\n");
+ pmsg++; /* next message */
+ }
+ return i;
+}
+
+/*
+ * Return list of supported functionality.
+ */
+static u32 at91_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm at91_algorithm = {
+ .master_xfer = at91_xfer,
+ .functionality = at91_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int __devinit at91_i2c_probe(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter;
+ struct resource *res;
+ int rc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1, "at91_i2c"))
+ return -EBUSY;
+
+ twi_base = ioremap(res->start, res->end - res->start + 1);
+ if (!twi_base) {
+ rc = -ENOMEM;
+ goto fail0;
+ }
+
+ twi_clk = clk_get(NULL, "twi_clk");
+ if (IS_ERR(twi_clk)) {
+ dev_err(&pdev->dev, "no clock defined\n");
+ rc = -ENODEV;
+ goto fail1;
+ }
+
+ adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (adapter == NULL) {
+ dev_err(&pdev->dev, "can't allocate inteface!\n");
+ rc = -ENOMEM;
+ goto fail2;
+ }
+ sprintf(adapter->name, "AT91");
+ adapter->algo = &at91_algorithm;
+ adapter->class = I2C_CLASS_HWMON;
+ adapter->dev.parent = &pdev->dev;
+
+ platform_set_drvdata(pdev, adapter);
+
+ clk_enable(twi_clk); /* enable peripheral clock */
+ at91_twi_hwinit(); /* initialize TWI controller */
+
+ rc = i2c_add_adapter(adapter);
+ if (rc) {
+ dev_err(&pdev->dev, "Adapter %s registration failed\n",
+ adapter->name);
+ goto fail3;
+ }
+
+ dev_info(&pdev->dev, "AT91 i2c bus driver.\n");
+ return 0;
+
+fail3:
+ platform_set_drvdata(pdev, NULL);
+ kfree(adapter);
+ clk_disable(twi_clk);
+fail2:
+ clk_put(twi_clk);
+fail1:
+ iounmap(twi_base);
+fail0:
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ return rc;
+}
+
+static int __devexit at91_i2c_remove(struct platform_device *pdev)
+{
+ struct i2c_adapter *adapter = platform_get_drvdata(pdev);
+ struct resource *res;
+ int rc;
+
+ rc = i2c_del_adapter(adapter);
+ platform_set_drvdata(pdev, NULL);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iounmap(twi_base);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ clk_disable(twi_clk); /* disable peripheral clock */
+ clk_put(twi_clk);
+
+ return rc;
+}
+
+#ifdef CONFIG_PM
+
+/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */
+
+static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ clk_disable(twi_clk);
+ return 0;
+}
+
+static int at91_i2c_resume(struct platform_device *pdev)
+{
+ return clk_enable(twi_clk);
+}
+
+#else
+#define at91_i2c_suspend NULL
+#define at91_i2c_resume NULL
+#endif
+
+static struct platform_driver at91_i2c_driver = {
+ .probe = at91_i2c_probe,
+ .remove = __devexit_p(at91_i2c_remove),
+ .suspend = at91_i2c_suspend,
+ .resume = at91_i2c_resume,
+ .driver = {
+ .name = "at91_i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_i2c_init(void)
+{
+ return platform_driver_register(&at91_i2c_driver);
+}
+
+static void __exit at91_i2c_exit(void)
+{
+ platform_driver_unregister(&at91_i2c_driver);
+}
+
+module_init(at91_i2c_init);
+module_exit(at91_i2c_exit);
+
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index a591fe6..8349674 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -293,7 +293,7 @@
static void i2c_pcfisa_exit(void)
{
- i2c_pcf_del_bus(&pcf_isa_ops);
+ i2c_del_adapter(&pcf_isa_ops);
if (irq > 0) {
disable_irq(irq);
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 457d48a..9832f77 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -146,7 +146,7 @@
static void __devexit hydra_remove(struct pci_dev *dev)
{
pdregw(hydra_bit_data.data, 0); /* clear SCLK_OE and SDAT_OE */
- i2c_bit_del_bus(&hydra_adap);
+ i2c_del_adapter(&hydra_adap);
iounmap(hydra_bit_data.data);
release_mem_region(pci_resource_start(dev, 0)+
offsetof(struct Hydra, CachePD), 4);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index c7be2fd..ae625b8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -470,12 +470,20 @@
int err;
I801_dev = dev;
- if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) ||
- (dev->device == PCI_DEVICE_ID_INTEL_ESB_4))
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_82801DB_3:
+ case PCI_DEVICE_ID_INTEL_82801EB_3:
+ case PCI_DEVICE_ID_INTEL_ESB_4:
+ case PCI_DEVICE_ID_INTEL_ICH6_16:
+ case PCI_DEVICE_ID_INTEL_ICH7_17:
+ case PCI_DEVICE_ID_INTEL_ESB2_17:
+ case PCI_DEVICE_ID_INTEL_ICH8_5:
+ case PCI_DEVICE_ID_INTEL_ICH9_6:
isich4 = 1;
- else
+ break;
+ default:
isich4 = 0;
+ }
err = pci_enable_device(dev);
if (err) {
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
index b66fb6b..10c98bc 100644
--- a/drivers/i2c/busses/i2c-i810.c
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -219,14 +219,14 @@
return retval;
retval = i2c_bit_add_bus(&i810_ddc_adapter);
if (retval)
- i2c_bit_del_bus(&i810_i2c_adapter);
+ i2c_del_adapter(&i810_i2c_adapter);
return retval;
}
static void __devexit i810_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&i810_ddc_adapter);
- i2c_bit_del_bus(&i810_i2c_adapter);
+ i2c_del_adapter(&i810_ddc_adapter);
+ i2c_del_adapter(&i810_i2c_adapter);
iounmap(ioaddr);
}
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 781a99c..1898e99 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -680,6 +680,12 @@
dev->idx = ocp->def->index;
ocp_set_drvdata(ocp, dev);
+ if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs),
+ "ibm_iic")) {
+ ret = -EBUSY;
+ goto fail1;
+ }
+
if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
dev->idx);
@@ -750,6 +756,8 @@
iounmap(dev->vaddr);
fail2:
+ release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
+fail1:
ocp_set_drvdata(ocp, NULL);
kfree(dev);
return ret;
@@ -777,6 +785,7 @@
free_irq(dev->irq, dev);
}
iounmap(dev->vaddr);
+ release_mem_region(ocp->def->paddr, sizeof(struct iic_regs));
kfree(dev);
}
}
diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
deleted file mode 100644
index f7d7186..0000000
--- a/drivers/i2c/busses/i2c-ite.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- -------------------------------------------------------------------------
- i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system
- -------------------------------------------------------------------------
- Hai-Pao Fan, MontaVista Software, Inc.
- hpfan@mvista.com or source@mvista.com
-
- Copyright 2001 MontaVista Software Inc.
-
- ----------------------------------------------------------------------------
- This file was highly leveraged from i2c-elektor.c, which was created
- by Simon G. Vogl and Hans Berglund:
-
-
- Copyright (C) 1995-97 Simon G. Vogl
- 1998-99 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl> */
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-ite.h>
-#include <linux/i2c-adap-ite.h>
-#include "../i2c-ite.h"
-
-#define DEFAULT_BASE 0x14014030
-#define ITE_IIC_IO_SIZE 0x40
-#define DEFAULT_IRQ 0
-#define DEFAULT_CLOCK 0x1b0e /* default 16MHz/(27+14) = 400KHz */
-#define DEFAULT_OWN 0x55
-
-static int base;
-static int irq;
-static int clock;
-static int own;
-
-static struct iic_ite gpi;
-static wait_queue_head_t iic_wait;
-static int iic_pending;
-static spinlock_t lock;
-
-/* ----- local functions ---------------------------------------------- */
-
-static void iic_ite_setiic(void *data, int ctl, short val)
-{
- unsigned long j = jiffies + 10;
-
- pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff);
-#ifdef DEBUG
- while (time_before(jiffies, j))
- schedule();
-#endif
- outw(val,ctl);
-}
-
-static short iic_ite_getiic(void *data, int ctl)
-{
- short val;
-
- val = inw(ctl);
- pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff);
- return (val);
-}
-
-/* Return our slave address. This is the address
- * put on the I2C bus when another master on the bus wants to address us
- * as a slave
- */
-static int iic_ite_getown(void *data)
-{
- return (gpi.iic_own);
-}
-
-
-static int iic_ite_getclock(void *data)
-{
- return (gpi.iic_clock);
-}
-
-
-/* Put this process to sleep. We will wake up when the
- * IIC controller interrupts.
- */
-static void iic_ite_waitforpin(void) {
- DEFINE_WAIT(wait);
- int timeout = 2;
- unsigned long flags;
-
- /* If interrupts are enabled (which they are), then put the process to
- * sleep. This process will be awakened by two events -- either the
- * the IIC peripheral interrupts or the timeout expires.
- * If interrupts are not enabled then delay for a reasonable amount
- * of time and return.
- */
- if (gpi.iic_irq > 0) {
- spin_lock_irqsave(&lock, flags);
- if (iic_pending == 0) {
- spin_unlock_irqrestore(&lock, flags);
- prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE);
- if (schedule_timeout(timeout*HZ)) {
- spin_lock_irqsave(&lock, flags);
- if (iic_pending == 1) {
- iic_pending = 0;
- }
- spin_unlock_irqrestore(&lock, flags);
- }
- finish_wait(&iic_wait, &wait);
- } else {
- iic_pending = 0;
- spin_unlock_irqrestore(&lock, flags);
- }
- } else {
- udelay(100);
- }
-}
-
-
-static irqreturn_t iic_ite_handler(int this_irq, void *dev_id)
-{
- spin_lock(&lock);
- iic_pending = 1;
- spin_unlock(&lock);
-
- wake_up_interruptible(&iic_wait);
-
- return IRQ_HANDLED;
-}
-
-
-/* Lock the region of memory where I/O registers exist. Request our
- * interrupt line and register its associated handler.
- */
-static int iic_hw_resrc_init(void)
-{
- if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
- return -ENODEV;
-
- if (gpi.iic_irq <= 0)
- return 0;
-
- if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
- gpi.iic_irq = 0;
- else
- enable_irq(gpi.iic_irq);
-
- return 0;
-}
-
-
-static void iic_ite_release(void)
-{
- if (gpi.iic_irq > 0) {
- disable_irq(gpi.iic_irq);
- free_irq(gpi.iic_irq, 0);
- }
- release_region(gpi.iic_base , 2);
-}
-
-/* ------------------------------------------------------------------------
- * Encapsulate the above functions in the correct operations structure.
- * This is only done when more than one hardware adapter is supported.
- */
-static struct i2c_algo_iic_data iic_ite_data = {
- NULL,
- iic_ite_setiic,
- iic_ite_getiic,
- iic_ite_getown,
- iic_ite_getclock,
- iic_ite_waitforpin,
- 80, 80, 100, /* waits, timeout */
-};
-
-static struct i2c_adapter iic_ite_ops = {
- .owner = THIS_MODULE,
- .id = I2C_HW_I_IIC,
- .algo_data = &iic_ite_data,
- .name = "ITE IIC adapter",
-};
-
-/* Called when the module is loaded. This function starts the
- * cascade of calls up through the hierarchy of i2c modules (i.e. up to the
- * algorithm layer and into to the core layer)
- */
-static int __init iic_ite_init(void)
-{
-
- struct iic_ite *piic = &gpi;
-
- printk(KERN_INFO "Initialize ITE IIC adapter module\n");
- if (base == 0)
- piic->iic_base = DEFAULT_BASE;
- else
- piic->iic_base = base;
-
- if (irq == 0)
- piic->iic_irq = DEFAULT_IRQ;
- else
- piic->iic_irq = irq;
-
- if (clock == 0)
- piic->iic_clock = DEFAULT_CLOCK;
- else
- piic->iic_clock = clock;
-
- if (own == 0)
- piic->iic_own = DEFAULT_OWN;
- else
- piic->iic_own = own;
-
- iic_ite_data.data = (void *)piic;
- init_waitqueue_head(&iic_wait);
- spin_lock_init(&lock);
- if (iic_hw_resrc_init() == 0) {
- if (i2c_iic_add_bus(&iic_ite_ops) < 0)
- return -ENODEV;
- } else {
- return -ENODEV;
- }
- printk(KERN_INFO " found device at %#x irq %d.\n",
- piic->iic_base, piic->iic_irq);
- return 0;
-}
-
-
-static void iic_ite_exit(void)
-{
- i2c_iic_del_bus(&iic_ite_ops);
- iic_ite_release();
-}
-
-/* If modules is NOT defined when this file is compiled, then the MODULE_*
- * macros will resolve to nothing
- */
-MODULE_AUTHOR("MontaVista Software <www.mvista.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter");
-MODULE_LICENSE("GPL");
-
-module_param(base, int, 0);
-module_param(irq, int, 0);
-module_param(clock, int, 0);
-module_param(own, int, 0);
-
-
-/* Called when module is loaded or when kernel is initialized.
- * If MODULES is defined when this file is compiled, then this function will
- * resolve to init_module (the function called when insmod is invoked for a
- * module). Otherwise, this function is called early in the boot, when the
- * kernel is intialized. Check out /include/init.h to see how this works.
- */
-module_init(iic_ite_init);
-
-/* Resolves to module_cleanup when MODULES is defined. */
-module_exit(iic_ite_exit);
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index dd3f4cd..efa3ecc 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -90,7 +90,7 @@
platform_set_drvdata(plat_dev, NULL);
- i2c_bit_del_bus(&drv_data->adapter);
+ i2c_del_adapter(&drv_data->adapter);
kfree(drv_data);
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index 68fe863..08e89b8 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -91,7 +91,7 @@
platform_set_drvdata(plat_dev, NULL);
- i2c_bit_del_bus(&drv_data->adapter);
+ i2c_del_adapter(&drv_data->adapter);
kfree(drv_data);
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index e0292e4..ad37c10 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -35,7 +35,7 @@
nForce4 MCP55 0368
This driver supports the 2 SMBuses that are included in the MCP of the
- nForce2/3/4 chipsets.
+ nForce2/3/4/5xx chipsets.
*/
/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
@@ -52,8 +52,8 @@
#include <asm/io.h>
MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
-MODULE_DESCRIPTION("nForce2 SMBus driver");
+MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@gmx.net>");
+MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver");
struct nforce2_smbus {
@@ -80,9 +80,6 @@
#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */
#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */
#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */
-#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */
-#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */
-#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */
#define NVIDIA_SMB_STS_DONE 0x80
#define NVIDIA_SMB_STS_ALRM 0x40
@@ -95,40 +92,17 @@
#define NVIDIA_SMB_PRTCL_BYTE 0x04
#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06
#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08
-#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a
-#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c
-#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d
-#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
#define NVIDIA_SMB_PRTCL_PEC 0x80
static struct pci_driver nforce2_driver;
-static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data *data);
-static u32 nforce2_func(struct i2c_adapter *adapter);
-
-
-static const struct i2c_algorithm smbus_algorithm = {
- .smbus_xfer = nforce2_access,
- .functionality = nforce2_func,
-};
-
-static struct i2c_adapter nforce2_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON,
- .algo = &smbus_algorithm,
-};
-
-/* Return -1 on error. See smbus.h for more information */
+/* Return -1 on error */
static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data)
{
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec, temp;
- unsigned char len = 0; /* to keep the compiler quiet */
- int i;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
NVIDIA_SMB_PRTCL_WRITE;
@@ -163,35 +137,6 @@
protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
break;
- case I2C_SMBUS_BLOCK_DATA:
- outb_p(command, NVIDIA_SMB_CMD);
- if (read_write == I2C_SMBUS_WRITE) {
- len = min_t(u8, data->block[0], 32);
- outb_p(len, NVIDIA_SMB_BCNT);
- for (i = 0; i < len; i++)
- outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
- }
- protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
- break;
-
- case I2C_SMBUS_I2C_BLOCK_DATA:
- len = min_t(u8, data->block[0], 32);
- outb_p(command, NVIDIA_SMB_CMD);
- outb_p(len, NVIDIA_SMB_BCNT);
- if (read_write == I2C_SMBUS_WRITE)
- for (i = 0; i < len; i++)
- outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
- protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA;
- break;
-
- case I2C_SMBUS_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
-
- case I2C_SMBUS_BLOCK_PROC_CALL:
- dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
- return -1;
-
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -227,19 +172,8 @@
break;
case I2C_SMBUS_WORD_DATA:
- /* case I2C_SMBUS_PROC_CALL: not supported */
data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
break;
-
- case I2C_SMBUS_BLOCK_DATA:
- /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */
- len = inb_p(NVIDIA_SMB_BCNT);
- len = min_t(u8, len, 32);
- case I2C_SMBUS_I2C_BLOCK_DATA:
- for (i = 0; i < len; i++)
- data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
- data->block[0] = len;
- break;
}
return 0;
@@ -250,10 +184,14 @@
{
/* other functionality might be possible, but is not tested */
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* |
- I2C_FUNC_SMBUS_BLOCK_DATA */;
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
}
+static struct i2c_algorithm smbus_algorithm = {
+ .smbus_xfer = nforce2_access,
+ .functionality = nforce2_func,
+};
+
static struct pci_device_id nforce2_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
@@ -267,7 +205,6 @@
{ 0 }
};
-
MODULE_DEVICE_TABLE (pci, nforce2_ids);
@@ -291,7 +228,7 @@
}
smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK;
- smbus->size = 8;
+ smbus->size = 64;
}
smbus->dev = dev;
@@ -300,7 +237,9 @@
smbus->base, smbus->base+smbus->size-1, name);
return -1;
}
- smbus->adapter = nforce2_adapter;
+ smbus->adapter.owner = THIS_MODULE;
+ smbus->adapter.class = I2C_CLASS_HWMON;
+ smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
smbus->adapter.dev.parent = &dev->dev;
snprintf(smbus->adapter.name, I2C_NAME_SIZE,
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index dec04da..bcd8367 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -231,8 +231,8 @@
* 13 2 1
* 19.2 2 1
*/
- if (fclk_rate > 16000000)
- psc = (fclk_rate + 8000000) / 12000000;
+ if (fclk_rate > 12000000)
+ psc = fclk_rate / 12000000;
}
/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 5eb2bd2..4bc4281 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -163,7 +163,7 @@
if (adapter_parm[type].init.val)
line_set(0, &adapter_parm[type].init);
- i2c_bit_del_bus(&parport_adapter);
+ i2c_del_adapter(&parport_adapter);
release_region(base, 3);
}
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 48a8294..66696a4 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -218,7 +218,7 @@
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
- i2c_bit_del_bus(&adapter->adapter);
+ i2c_del_adapter(&adapter->adapter);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 407840b..cc6536a 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -156,7 +156,7 @@
static void pca_isa_exit(void)
{
- i2c_pca_del_bus(&pca_isa_ops);
+ i2c_del_adapter(&pca_isa_ops);
if (irq > 0) {
disable_irq(irq);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
new file mode 100644
index 0000000..de0bca7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -0,0 +1,708 @@
+/*
+ * Provides I2C support for Philips PNX010x/PNX4008 boards.
+ *
+ * Authors: Dennis Kovalev <dkovalev@ru.mvista.com>
+ * Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-pnx.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define I2C_PNX_TIMEOUT 10 /* msec */
+#define I2C_PNX_SPEED_KHZ 100
+#define I2C_PNX_REGION_SIZE 0x100
+#define PNX_DEFAULT_FREQ 13 /* MHz */
+
+static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data)
+{
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_STS(data)) & mstatus_active)) {
+ mdelay(1);
+ timeout--;
+ }
+ return (timeout <= 0);
+}
+
+static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
+{
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) {
+ mdelay(1);
+ timeout--;
+ }
+ return (timeout <= 0);
+}
+
+static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *data = adap->algo_data;
+ struct timer_list *timer = &data->mif.timer;
+ int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+
+ del_timer_sync(timer);
+
+ dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
+ jiffies, expires);
+
+ timer->expires = jiffies + expires;
+ timer->data = (unsigned long)adap;
+
+ add_timer(timer);
+}
+
+/**
+ * i2c_pnx_start - start a device
+ * @slave_addr: slave address
+ * @adap: pointer to adapter structure
+ *
+ * Generate a START signal in the desired mode.
+ */
+static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__,
+ slave_addr, alg_data->mif.mode);
+
+ /* Check for 7 bit slave addresses only */
+ if (slave_addr & ~0x7f) {
+ dev_err(&adap->dev, "%s: Invalid slave address %x. "
+ "Only 7-bit addresses are supported\n",
+ adap->name, slave_addr);
+ return -EINVAL;
+ }
+
+ /* First, make sure bus is idle */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
+ /* Somebody else is monopolizing the bus */
+ dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
+ "cntrl = %x, stat = %x\n",
+ adap->name, slave_addr,
+ ioread32(I2C_REG_CTL(alg_data)),
+ ioread32(I2C_REG_STS(alg_data)));
+ return -EBUSY;
+ } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
+ /* Sorry, we lost the bus */
+ dev_err(&adap->dev, "%s: Arbitration failure. "
+ "Slave addr = %02x\n", adap->name, slave_addr);
+ return -EIO;
+ }
+
+ /*
+ * OK, I2C is enabled and we have the bus.
+ * Clear the current TDI and AFI status flags.
+ */
+ iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
+ I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__,
+ (slave_addr << 1) | start_bit | alg_data->mif.mode);
+
+ /* Write the slave address, START bit and R/W bit */
+ iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
+ I2C_REG_TX(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__);
+
+ return 0;
+}
+
+/**
+ * i2c_pnx_stop - stop a device
+ * @adap: pointer to I2C adapter structure
+ *
+ * Generate a STOP signal to terminate the master transaction.
+ */
+static void i2c_pnx_stop(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ /* Only 1 msec max timeout due to interrupt context */
+ long timeout = 1000;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ /* Write a STOP bit to TX FIFO */
+ iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data));
+
+ /* Wait until the STOP is seen. */
+ while (timeout > 0 &&
+ (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) {
+ /* may be called from interrupt context */
+ udelay(1);
+ timeout--;
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+}
+
+/**
+ * i2c_pnx_master_xmit - transmit data to slave
+ * @adap: pointer to I2C adapter structure
+ *
+ * Sends one byte of data to the slave
+ */
+static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 val;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ if (alg_data->mif.len > 0) {
+ /* We still have something to talk about... */
+ val = *alg_data->mif.buf++;
+
+ if (alg_data->mif.len == 1) {
+ val |= stop_bit;
+ if (!alg_data->last)
+ val |= start_bit;
+ }
+
+ alg_data->mif.len--;
+ iowrite32(val, I2C_REG_TX(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__,
+ val, alg_data->mif.len + 1);
+
+ if (alg_data->mif.len == 0) {
+ if (alg_data->last) {
+ /* Wait until the STOP is seen. */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ dev_err(&adap->dev, "The bus is still "
+ "active after timeout\n");
+ }
+ /* Disable master interrupts */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+ ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+ I2C_REG_CTL(alg_data));
+
+ del_timer_sync(&alg_data->mif.timer);
+
+ dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
+ __FUNCTION__);
+
+ complete(&alg_data->mif.complete);
+ }
+ } else if (alg_data->mif.len == 0) {
+ /* zero-sized transfer */
+ i2c_pnx_stop(adap);
+
+ /* Disable master interrupts. */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
+ ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie),
+ I2C_REG_CTL(alg_data));
+
+ /* Stop timer. */
+ del_timer_sync(&alg_data->mif.timer);
+ dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
+ "zero-xfer.\n", __FUNCTION__);
+
+ complete(&alg_data->mif.complete);
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ return 0;
+}
+
+/**
+ * i2c_pnx_master_rcv - receive data from slave
+ * @adap: pointer to I2C adapter structure
+ *
+ * Reads one byte data from the slave
+ */
+static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ unsigned int val = 0;
+ u32 ctl = 0;
+
+ dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ /* Check, whether there is already data,
+ * or we didn't 'ask' for it yet.
+ */
+ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
+ dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
+ "Rx-fifo...\n", __FUNCTION__);
+
+ if (alg_data->mif.len == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+ if (!alg_data->last)
+ val |= start_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
+
+ /*
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
+ */
+ iowrite32(val, I2C_REG_TX(alg_data));
+
+ return 0;
+ }
+
+ /* Handle data. */
+ if (alg_data->mif.len > 0) {
+ val = ioread32(I2C_REG_RX(alg_data));
+ *alg_data->mif.buf++ = (u8) (val & 0xff);
+ dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val,
+ alg_data->mif.len);
+
+ alg_data->mif.len--;
+ if (alg_data->mif.len == 0) {
+ if (alg_data->last)
+ /* Wait until the STOP is seen. */
+ if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
+ dev_err(&adap->dev, "The bus is still "
+ "active after timeout\n");
+
+ /* Disable master interrupts */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie | mcntrl_daie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Kill timer. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ }
+ }
+
+ dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ return 0;
+}
+
+static irqreturn_t
+i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ u32 stat, ctl;
+ struct i2c_adapter *adap = dev_id;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
+ __FUNCTION__,
+ ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)),
+ alg_data->mif.mode);
+ stat = ioread32(I2C_REG_STS(alg_data));
+
+ /* let's see what kind of event this is */
+ if (stat & mstatus_afi) {
+ /* We lost arbitration in the midst of a transfer */
+ alg_data->mif.ret = -EIO;
+
+ /* Disable master interrupts. */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Stop timer, to prevent timeout. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ } else if (stat & mstatus_nai) {
+ /* Slave did not acknowledge, generate a STOP */
+ dev_dbg(&adap->dev, "%s(): "
+ "Slave did not acknowledge, generating a STOP.\n",
+ __FUNCTION__);
+ i2c_pnx_stop(adap);
+
+ /* Disable master interrupts. */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie |
+ mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ /* Our return value. */
+ alg_data->mif.ret = -EIO;
+
+ /* Stop timer, to prevent timeout. */
+ del_timer_sync(&alg_data->mif.timer);
+ complete(&alg_data->mif.complete);
+ } else {
+ /*
+ * Two options:
+ * - Master Tx needs data.
+ * - There is data in the Rx-fifo
+ * The latter is only the case if we have requested for data,
+ * via a dummy write. (See 'i2c_pnx_master_rcv'.)
+ * We therefore check, as a sanity check, whether that interrupt
+ * has been enabled.
+ */
+ if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
+ if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
+ i2c_pnx_master_xmit(adap);
+ } else if (alg_data->mif.mode == I2C_SMBUS_READ) {
+ i2c_pnx_master_rcv(adap);
+ }
+ }
+ }
+
+ /* Clear TDI and AFI bits */
+ stat = ioread32(I2C_REG_STS(alg_data));
+ iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)));
+
+ return IRQ_HANDLED;
+}
+
+static void i2c_pnx_timeout(unsigned long data)
+{
+ struct i2c_adapter *adap = (struct i2c_adapter *)data;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 ctl;
+
+ dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
+ "Resetting master...\n",
+ ioread32(I2C_REG_STS(alg_data)),
+ ioread32(I2C_REG_CTL(alg_data)));
+
+ /* Reset master and disable interrupts */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie);
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+
+ ctl |= mcntrl_reset;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ alg_data->mif.ret = -EIO;
+ complete(&alg_data->mif.complete);
+}
+
+static inline void bus_reset_if_active(struct i2c_adapter *adap)
+{
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 stat;
+
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
+ dev_err(&adap->dev,
+ "%s: Bus is still active after xfer. Reset it...\n",
+ adap->name);
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ } else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) {
+ /* If there is data in the fifo's after transfer,
+ * flush fifo's by reset.
+ */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ } else if (stat & mstatus_nai) {
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
+ I2C_REG_CTL(alg_data));
+ wait_reset(I2C_PNX_TIMEOUT, alg_data);
+ }
+}
+
+/**
+ * i2c_pnx_xfer - generic transfer entry point
+ * @adap: pointer to I2C adapter structure
+ * @msgs: array of messages
+ * @num: number of messages
+ *
+ * Initiates the transfer
+ */
+static int
+i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct i2c_msg *pmsg;
+ int rc = 0, completed = 0, i;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+ u32 stat = ioread32(I2C_REG_STS(alg_data));
+
+ dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
+ __FUNCTION__, num, ioread32(I2C_REG_STS(alg_data)));
+
+ bus_reset_if_active(adap);
+
+ /* Process transactions in a loop. */
+ for (i = 0; rc >= 0 && i < num; i++) {
+ u8 addr;
+
+ pmsg = &msgs[i];
+ addr = pmsg->addr;
+
+ if (pmsg->flags & I2C_M_TEN) {
+ dev_err(&adap->dev,
+ "%s: 10 bits addr not supported!\n",
+ adap->name);
+ rc = -EINVAL;
+ break;
+ }
+
+ alg_data->mif.buf = pmsg->buf;
+ alg_data->mif.len = pmsg->len;
+ alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
+ I2C_SMBUS_READ : I2C_SMBUS_WRITE;
+ alg_data->mif.ret = 0;
+ alg_data->last = (i == num - 1);
+
+ dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__,
+ alg_data->mif.mode,
+ alg_data->mif.len);
+
+ i2c_pnx_arm_timer(adap);
+
+ /* initialize the completion var */
+ init_completion(&alg_data->mif.complete);
+
+ /* Enable master interrupt */
+ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie |
+ mcntrl_naie | mcntrl_drmie,
+ I2C_REG_CTL(alg_data));
+
+ /* Put start-code and slave-address on the bus. */
+ rc = i2c_pnx_start(addr, adap);
+ if (rc < 0)
+ break;
+
+ /* Wait for completion */
+ wait_for_completion(&alg_data->mif.complete);
+
+ if (!(rc = alg_data->mif.ret))
+ completed++;
+ dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
+ __FUNCTION__, rc);
+
+ /* Clear TDI and AFI bits in case they are set. */
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
+ dev_dbg(&adap->dev,
+ "%s: TDI still set... clearing now.\n",
+ adap->name);
+ iowrite32(stat, I2C_REG_STS(alg_data));
+ }
+ if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
+ dev_dbg(&adap->dev,
+ "%s: AFI still set... clearing now.\n",
+ adap->name);
+ iowrite32(stat, I2C_REG_STS(alg_data));
+ }
+ }
+
+ bus_reset_if_active(adap);
+
+ /* Cleanup to be sure... */
+ alg_data->mif.buf = NULL;
+ alg_data->mif.len = 0;
+
+ dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
+ __FUNCTION__, ioread32(I2C_REG_STS(alg_data)));
+
+ if (completed != num)
+ return ((rc < 0) ? rc : -EREMOTEIO);
+
+ return num;
+}
+
+static u32 i2c_pnx_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm pnx_algorithm = {
+ .master_xfer = i2c_pnx_xfer,
+ .functionality = i2c_pnx_func,
+};
+
+static int i2c_pnx_controller_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ return i2c_pnx->suspend(pdev, state);
+}
+
+static int i2c_pnx_controller_resume(struct platform_device *pdev)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ return i2c_pnx->resume(pdev);
+}
+
+static int __devinit i2c_pnx_probe(struct platform_device *pdev)
+{
+ unsigned long tmp;
+ int ret = 0;
+ struct i2c_pnx_algo_data *alg_data;
+ int freq_mhz;
+ struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data;
+
+ if (!i2c_pnx || !i2c_pnx->adapter) {
+ dev_err(&pdev->dev, "%s: no platform data supplied\n",
+ __FUNCTION__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ platform_set_drvdata(pdev, i2c_pnx);
+
+ if (i2c_pnx->calculate_input_freq)
+ freq_mhz = i2c_pnx->calculate_input_freq(pdev);
+ else {
+ freq_mhz = PNX_DEFAULT_FREQ;
+ dev_info(&pdev->dev, "Setting bus frequency to default value: "
+ "%d MHz", freq_mhz);
+ }
+
+ i2c_pnx->adapter->algo = &pnx_algorithm;
+
+ alg_data = i2c_pnx->adapter->algo_data;
+ init_timer(&alg_data->mif.timer);
+ alg_data->mif.timer.function = i2c_pnx_timeout;
+ alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter;
+
+ /* Register I/O resource */
+ if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) {
+ dev_err(&pdev->dev,
+ "I/O region 0x%08x for I2C already in use.\n",
+ alg_data->base);
+ ret = -ENODEV;
+ goto out_drvdata;
+ }
+
+ if (!(alg_data->ioaddr =
+ (u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) {
+ dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n");
+ ret = -ENOMEM;
+ goto out_release;
+ }
+
+ i2c_pnx->set_clock_run(pdev);
+
+ /*
+ * Clock Divisor High This value is the number of system clocks
+ * the serial clock (SCL) will be high.
+ * For example, if the system clock period is 50 ns and the maximum
+ * desired serial period is 10000 ns (100 kHz), then CLKHI would be
+ * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value
+ * programmed into CLKHI will vary from this slightly due to
+ * variations in the output pad's rise and fall times as well as
+ * the deglitching filter length.
+ */
+
+ tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ iowrite32(tmp, I2C_REG_CKH(alg_data));
+ iowrite32(tmp, I2C_REG_CKL(alg_data));
+
+ iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data));
+ if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) {
+ ret = -ENODEV;
+ goto out_unmap;
+ }
+ init_completion(&alg_data->mif.complete);
+
+ ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
+ 0, pdev->name, i2c_pnx->adapter);
+ if (ret)
+ goto out_clock;
+
+ /* Register this adapter with the I2C subsystem */
+ i2c_pnx->adapter->dev.parent = &pdev->dev;
+ ret = i2c_add_adapter(i2c_pnx->adapter);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "I2C: Failed to add bus\n");
+ goto out_irq;
+ }
+
+ dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
+ i2c_pnx->adapter->name, alg_data->base, alg_data->irq);
+
+ return 0;
+
+out_irq:
+ free_irq(alg_data->irq, alg_data);
+out_clock:
+ i2c_pnx->set_clock_stop(pdev);
+out_unmap:
+ iounmap((void *)alg_data->ioaddr);
+out_release:
+ release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+out_drvdata:
+ platform_set_drvdata(pdev, NULL);
+out:
+ return ret;
+}
+
+static int __devexit i2c_pnx_remove(struct platform_device *pdev)
+{
+ struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev);
+ struct i2c_adapter *adap = i2c_pnx->adapter;
+ struct i2c_pnx_algo_data *alg_data = adap->algo_data;
+
+ free_irq(alg_data->irq, alg_data);
+ i2c_del_adapter(adap);
+ i2c_pnx->set_clock_stop(pdev);
+ iounmap((void *)alg_data->ioaddr);
+ release_region(alg_data->base, I2C_PNX_REGION_SIZE);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver i2c_pnx_driver = {
+ .driver = {
+ .name = "pnx-i2c",
+ .owner = THIS_MODULE,
+ },
+ .probe = i2c_pnx_probe,
+ .remove = __devexit_p(i2c_pnx_remove),
+ .suspend = i2c_pnx_controller_suspend,
+ .resume = i2c_pnx_controller_resume,
+};
+
+static int __init i2c_adap_pnx_init(void)
+{
+ return platform_driver_register(&i2c_pnx_driver);
+}
+
+static void __exit i2c_adap_pnx_exit(void)
+{
+ platform_driver_unregister(&i2c_pnx_driver);
+}
+
+MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
+MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_I2C_PNX_EARLY
+/* We need to make sure I2C is initialized before USB */
+subsys_initcall(i2c_adap_pnx_init);
+#else
+mudule_init(i2c_adap_pnx_init);
+#endif
+module_exit(i2c_adap_pnx_exit);
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
index 7745e21..07c1f1e 100644
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -212,7 +212,7 @@
if (chip->i2c_bus[i].adap_ok == 0)
continue;
- ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap);
+ ret = i2c_del_adapter(&chip->i2c_bus[i].adap);
if (ret) {
dev_err(&dev->dev, "%s not removed\n",
chip->i2c_bus[i].adap.name);
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index 209f47e..844b4ff 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -173,7 +173,7 @@
static void __devexit savage4_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&savage4_i2c_adapter);
+ i2c_del_adapter(&savage4_i2c_adapter);
iounmap(ioaddr);
}
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
new file mode 100644
index 0000000..081d957
--- /dev/null
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -0,0 +1,153 @@
+/*
+ * i2c-versatile.c
+ *
+ * Copyright (C) 2006 ARM Ltd.
+ * written by Russell King, Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#define I2C_CONTROL 0x00
+#define I2C_CONTROLS 0x00
+#define I2C_CONTROLC 0x04
+#define SCL (1 << 0)
+#define SDA (1 << 1)
+
+struct i2c_versatile {
+ struct i2c_adapter adap;
+ struct i2c_algo_bit_data algo;
+ void __iomem *base;
+};
+
+static void i2c_versatile_setsda(void *data, int state)
+{
+ struct i2c_versatile *i2c = data;
+
+ writel(SDA, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static void i2c_versatile_setscl(void *data, int state)
+{
+ struct i2c_versatile *i2c = data;
+
+ writel(SCL, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC));
+}
+
+static int i2c_versatile_getsda(void *data)
+{
+ struct i2c_versatile *i2c = data;
+ return !!(readl(i2c->base + I2C_CONTROL) & SDA);
+}
+
+static int i2c_versatile_getscl(void *data)
+{
+ struct i2c_versatile *i2c = data;
+ return !!(readl(i2c->base + I2C_CONTROL) & SCL);
+}
+
+static struct i2c_algo_bit_data i2c_versatile_algo = {
+ .setsda = i2c_versatile_setsda,
+ .setscl = i2c_versatile_setscl,
+ .getsda = i2c_versatile_getsda,
+ .getscl = i2c_versatile_getscl,
+ .udelay = 30,
+ .timeout = HZ,
+};
+
+static int i2c_versatile_probe(struct platform_device *dev)
+{
+ struct i2c_versatile *i2c;
+ struct resource *r;
+ int ret;
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!r) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ if (!request_mem_region(r->start, r->end - r->start + 1, "versatile-i2c")) {
+ ret = -EBUSY;
+ goto err_out;
+ }
+
+ i2c = kzalloc(sizeof(struct i2c_versatile), GFP_KERNEL);
+ if (!i2c) {
+ ret = -ENOMEM;
+ goto err_release;
+ }
+
+ i2c->base = ioremap(r->start, r->end - r->start + 1);
+ if (!i2c->base) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ writel(SCL | SDA, i2c->base + I2C_CONTROLS);
+
+ i2c->adap.owner = THIS_MODULE;
+ strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name));
+ i2c->adap.algo_data = &i2c->algo;
+ i2c->adap.dev.parent = &dev->dev;
+ i2c->algo = i2c_versatile_algo;
+ i2c->algo.data = i2c;
+
+ ret = i2c_bit_add_bus(&i2c->adap);
+ if (ret >= 0) {
+ platform_set_drvdata(dev, i2c);
+ return 0;
+ }
+
+ iounmap(i2c->base);
+ err_free:
+ kfree(i2c);
+ err_release:
+ release_mem_region(r->start, r->end - r->start + 1);
+ err_out:
+ return ret;
+}
+
+static int i2c_versatile_remove(struct platform_device *dev)
+{
+ struct i2c_versatile *i2c = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ i2c_del_adapter(&i2c->adap);
+ return 0;
+}
+
+static struct platform_driver i2c_versatile_driver = {
+ .probe = i2c_versatile_probe,
+ .remove = i2c_versatile_remove,
+ .driver = {
+ .name = "versatile-i2c",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init i2c_versatile_init(void)
+{
+ return platform_driver_register(&i2c_versatile_driver);
+}
+
+static void __exit i2c_versatile_exit(void)
+{
+ platform_driver_unregister(&i2c_versatile_driver);
+}
+
+module_init(i2c_versatile_init);
+module_exit(i2c_versatile_exit);
+
+MODULE_DESCRIPTION("ARM Versatile I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 910e200..15d7e00 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -151,7 +151,7 @@
static void __devexit vt586b_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&vt586b_adapter);
+ i2c_del_adapter(&vt586b_adapter);
release_region(I2C_DIR, IOSPACE);
pm_io_base = 0;
}
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 6c8d251..b0377b8 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -211,14 +211,14 @@
return retval;
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
if (retval)
- i2c_bit_del_bus(&voodoo3_i2c_adapter);
+ i2c_del_adapter(&voodoo3_i2c_adapter);
return retval;
}
static void __devexit voodoo3_remove(struct pci_dev *dev)
{
- i2c_bit_del_bus(&voodoo3_i2c_adapter);
- i2c_bit_del_bus(&voodoo3_ddc_adapter);
+ i2c_del_adapter(&voodoo3_i2c_adapter);
+ i2c_del_adapter(&voodoo3_ddc_adapter);
iounmap(ioaddr);
}
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index 8ddbae4..6cd96e4 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -116,7 +116,7 @@
static void scx200_i2c_cleanup(void)
{
- i2c_bit_del_bus(&scx200_i2c_ops);
+ i2c_del_adapter(&scx200_i2c_ops);
}
module_init(scx200_i2c_init);
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 93d483b..ec17d6b 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -347,13 +347,19 @@
if ((status & 0x80) || (control & 0x80)) {
/* RTC not running */
- u8 buf[16];
+ u8 buf[1+16]; /* First byte is interpreted as address */
struct i2c_msg msg[1];
dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__);
/* Initialize all, including STATUS and CONTROL to zero */
memset(buf, 0, sizeof(buf));
+
+ /* Write valid values in the date/time registers */
+ buf[1+DS1337_REG_DAY] = 1;
+ buf[1+DS1337_REG_DATE] = 1;
+ buf[1+DS1337_REG_MONTH] = 1;
+
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].len = sizeof(buf);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 7ca81f4..3e31f1d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -127,20 +127,17 @@
return sprintf(buf, "%s\n", client->name);
}
-/*
- * We can't use the DEVICE_ATTR() macro here as we want the same filename for a
- * different type of a device. So beware if the DEVICE_ATTR() macro ever
- * changes, this definition will also have to change.
+/*
+ * We can't use the DEVICE_ATTR() macro here, as we used the same name for
+ * an i2c adapter attribute (above).
*/
-static struct device_attribute dev_attr_client_name = {
- .attr = {.name = "name", .mode = S_IRUGO, .owner = THIS_MODULE },
- .show = &show_client_name,
-};
+static struct device_attribute dev_attr_client_name =
+ __ATTR(name, S_IRUGO, &show_client_name, NULL);
/* ---------------------------------------------------
- * registering functions
- * ---------------------------------------------------
+ * registering functions
+ * ---------------------------------------------------
*/
/* -----
@@ -314,7 +311,7 @@
res = driver_register(&driver->driver);
if (res)
return res;
-
+
mutex_lock(&core_lists);
list_add_tail(&driver->list,&drivers);
@@ -338,13 +335,13 @@
struct list_head *item1, *item2, *_n;
struct i2c_client *client;
struct i2c_adapter *adap;
-
+
int res = 0;
mutex_lock(&core_lists);
/* Have a look at each adapter, if clients of this driver are still
- * attached. If so, detach them to be able to kill the driver
+ * attached. If so, detach them to be able to kill the driver
* afterwards.
*/
list_for_each(item1,&adapters) {
@@ -419,14 +416,14 @@
goto out_unlock;
}
list_add_tail(&client->list,&adapter->clients);
-
+
client->usage_count = 0;
client->dev.parent = &client->adapter->dev;
client->dev.driver = &client->driver->driver;
client->dev.bus = &i2c_bus_type;
client->dev.release = &i2c_client_release;
-
+
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
@@ -467,7 +464,7 @@
{
struct i2c_adapter *adapter = client->adapter;
int res = 0;
-
+
if (client->usage_count > 0) {
dev_warn(&client->dev, "Client [%s] still busy, "
"can't detach\n", client->name);
@@ -535,10 +532,10 @@
__FUNCTION__);
return -EPERM;
}
-
+
client->usage_count--;
i2c_dec_use_client(client);
-
+
return 0;
}
@@ -603,7 +600,7 @@
}
#endif
- mutex_lock(&adap->bus_lock);
+ mutex_lock_nested(&adap->bus_lock, adap->level);
ret = adap->algo->master_xfer(adap,msgs,num);
mutex_unlock(&adap->bus_lock);
@@ -624,7 +621,7 @@
msg.flags = client->flags & I2C_M_TEN;
msg.len = count;
msg.buf = (char *)buf;
-
+
ret = i2c_transfer(adap, &msg, 1);
/* If everything went ok (i.e. 1 msg transmitted), return #bytes
@@ -757,7 +754,7 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
if (address_data->probe[0] == I2C_CLIENT_END
&& address_data->normal_i2c[0] == I2C_CLIENT_END)
- return 0;
+ return 0;
dev_warn(&adapter->dev, "SMBus Quick command not supported, "
"can't probe for chips\n");
@@ -817,7 +814,7 @@
struct i2c_adapter* i2c_get_adapter(int id)
{
struct i2c_adapter *adapter;
-
+
mutex_lock(&core_lists);
adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id);
if (adapter && !try_module_get(adapter->owner))
@@ -834,14 +831,14 @@
/* The SMBus parts */
-#define POLY (0x1070U << 3)
+#define POLY (0x1070U << 3)
static u8
crc8(u16 data)
{
int i;
-
+
for(i = 0; i < 8; i++) {
- if (data & 0x8000)
+ if (data & 0x8000)
data = data ^ POLY;
data = data << 1;
}
@@ -891,13 +888,13 @@
rpec, cpec);
return -1;
}
- return 0;
+ return 0;
}
s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
- value,0,I2C_SMBUS_QUICK,NULL);
+ value,0,I2C_SMBUS_QUICK,NULL);
}
s32 i2c_smbus_read_byte(struct i2c_client *client)
@@ -996,11 +993,11 @@
I2C_SMBUS_I2C_BLOCK_DATA, &data);
}
-/* Simulate a SMBus command using the i2c protocol
+/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
/* So we need to generate a series of msgs. In the case of writing, we
@@ -1010,7 +1007,7 @@
unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
int num = read_write == I2C_SMBUS_READ?2:1;
- struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
+ struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
@@ -1103,14 +1100,14 @@
if (i) {
/* Compute PEC if first message is a write */
if (!(msg[0].flags & I2C_M_RD)) {
- if (num == 1) /* Write only */
+ if (num == 1) /* Write only */
i2c_smbus_add_pec(&msg[0]);
else /* Write followed by read */
partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
}
/* Ask for PEC if last message is a read */
if (msg[num-1].flags & I2C_M_RD)
- msg[num-1].len++;
+ msg[num-1].len++;
}
if (i2c_transfer(adapter, msg, num) < 0)
@@ -1130,7 +1127,7 @@
case I2C_SMBUS_BYTE_DATA:
data->byte = msgbuf1[0];
break;
- case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
data->word = msgbuf1[0] | (msgbuf1[1] << 8);
break;
@@ -1146,7 +1143,7 @@
s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
- char read_write, u8 command, int size,
+ char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
s32 res;
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 2e22a2f..ac5bd2a 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -1,5 +1,5 @@
/*
- i2c-dev.c - i2c-bus driver, char device interface
+ i2c-dev.c - i2c-bus driver, char device interface
Copyright (C) 1995-97 Simon G. Vogl
Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
@@ -90,6 +90,7 @@
spin_lock(&i2c_dev_list_lock);
list_del(&i2c_dev->list);
spin_unlock(&i2c_dev_list_lock);
+ kfree(i2c_dev);
}
static ssize_t show_adapter_name(struct device *dev,
@@ -172,7 +173,7 @@
switch ( cmd ) {
case I2C_SLAVE:
case I2C_SLAVE_FORCE:
- if ((arg > 0x3ff) ||
+ if ((arg > 0x3ff) ||
(((client->flags & I2C_M_TEN) == 0) && arg > 0x7f))
return -EINVAL;
if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg))
@@ -193,12 +194,11 @@
return 0;
case I2C_FUNCS:
funcs = i2c_get_functionality(client->adapter);
- return (copy_to_user((unsigned long __user *)arg, &funcs,
- sizeof(unsigned long)))?-EFAULT:0;
+ return put_user(funcs, (unsigned long __user *)arg);
case I2C_RDWR:
- if (copy_from_user(&rdwr_arg,
- (struct i2c_rdwr_ioctl_data __user *)arg,
+ if (copy_from_user(&rdwr_arg,
+ (struct i2c_rdwr_ioctl_data __user *)arg,
sizeof(rdwr_arg)))
return -EFAULT;
@@ -206,9 +206,9 @@
* be sent at once */
if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS)
return -EINVAL;
-
+
rdwr_pa = (struct i2c_msg *)
- kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
+ kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg),
GFP_KERNEL);
if (rdwr_pa == NULL) return -ENOMEM;
@@ -278,9 +278,9 @@
(struct i2c_smbus_ioctl_data __user *) arg,
sizeof(struct i2c_smbus_ioctl_data)))
return -EFAULT;
- if ((data_arg.size != I2C_SMBUS_BYTE) &&
+ if ((data_arg.size != I2C_SMBUS_BYTE) &&
(data_arg.size != I2C_SMBUS_QUICK) &&
- (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
+ (data_arg.size != I2C_SMBUS_BYTE_DATA) &&
(data_arg.size != I2C_SMBUS_WORD_DATA) &&
(data_arg.size != I2C_SMBUS_PROC_CALL) &&
(data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
@@ -291,11 +291,11 @@
data_arg.size);
return -EINVAL;
}
- /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
+ /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1,
so the check is valid if size==I2C_SMBUS_QUICK too. */
- if ((data_arg.read_write != I2C_SMBUS_READ) &&
+ if ((data_arg.read_write != I2C_SMBUS_READ) &&
(data_arg.read_write != I2C_SMBUS_WRITE)) {
- dev_dbg(&client->adapter->dev,
+ dev_dbg(&client->adapter->dev,
"read_write out of range (%x) in ioctl I2C_SMBUS.\n",
data_arg.read_write);
return -EINVAL;
@@ -304,7 +304,7 @@
/* Note that command values are always valid! */
if ((data_arg.size == I2C_SMBUS_QUICK) ||
- ((data_arg.size == I2C_SMBUS_BYTE) &&
+ ((data_arg.size == I2C_SMBUS_BYTE) &&
(data_arg.read_write == I2C_SMBUS_WRITE)))
/* These are special: we do not use data */
return i2c_smbus_xfer(client->adapter, client->addr,
@@ -322,14 +322,14 @@
if ((data_arg.size == I2C_SMBUS_BYTE_DATA) ||
(data_arg.size == I2C_SMBUS_BYTE))
datasize = sizeof(data_arg.data->byte);
- else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
+ else if ((data_arg.size == I2C_SMBUS_WORD_DATA) ||
(data_arg.size == I2C_SMBUS_PROC_CALL))
datasize = sizeof(data_arg.data->word);
else /* size == smbus block, i2c block, or block proc. call */
datasize = sizeof(data_arg.data->block);
- if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_WRITE)) {
if (copy_from_user(&temp, data_arg.data, datasize))
return -EFAULT;
@@ -337,8 +337,8 @@
res = i2c_smbus_xfer(client->adapter,client->addr,client->flags,
data_arg.read_write,
data_arg.command,data_arg.size,&temp);
- if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
- (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
(data_arg.read_write == I2C_SMBUS_READ))) {
if (copy_to_user(data_arg.data, &temp, datasize))
return -EFAULT;
@@ -417,8 +417,8 @@
i2c_dev->dev = device_create(i2c_dev_class, &adap->dev,
MKDEV(I2C_MAJOR, adap->nr),
"i2c-%d", adap->nr);
- if (!i2c_dev->dev) {
- res = -ENODEV;
+ if (IS_ERR(i2c_dev->dev)) {
+ res = PTR_ERR(i2c_dev->dev);
goto error;
}
res = device_create_file(i2c_dev->dev, &dev_attr_name);
@@ -432,7 +432,6 @@
device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
error:
return_i2c_dev(i2c_dev);
- kfree(i2c_dev);
return res;
}
@@ -447,7 +446,6 @@
device_remove_file(i2c_dev->dev, &dev_attr_name);
return_i2c_dev(i2c_dev);
device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
- kfree(i2c_dev);
pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name);
return 0;
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 13a6179..fbb7f14 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1485,7 +1485,7 @@
}
- i2c_bit_del_bus(i2c_ad);
+ i2c_del_adapter(i2c_ad);
kfree(i2c_ad);
}
}
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 8e4ce10..ffda71d 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -650,7 +650,7 @@
/* dvb */
ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE, &pdev->dev);
if (ret < 0)
- goto err_i2c_bit_del_bus;
+ goto err_i2c_del_adapter;
dvb_adapter = &pluto->dvb_adapter;
@@ -712,8 +712,8 @@
dvb_dmx_release(dvbdemux);
err_dvb_unregister_adapter:
dvb_unregister_adapter(dvb_adapter);
-err_i2c_bit_del_bus:
- i2c_bit_del_bus(&pluto->i2c_adap);
+err_i2c_del_adapter:
+ i2c_del_adapter(&pluto->i2c_adap);
err_pluto_hw_exit:
pluto_hw_exit(pluto);
err_free_irq:
@@ -748,7 +748,7 @@
dvb_dmxdev_release(&pluto->dmxdev);
dvb_dmx_release(dvbdemux);
dvb_unregister_adapter(dvb_adapter);
- i2c_bit_del_bus(&pluto->i2c_adap);
+ i2c_del_adapter(&pluto->i2c_adap);
pluto_hw_exit(pluto);
free_irq(pdev->irq, pluto);
pci_iounmap(pdev, pluto->io_mem);
diff --git a/drivers/media/video/bt8xx/bttv-i2c.c b/drivers/media/video/bt8xx/bttv-i2c.c
index 70de6c9..62b8730 100644
--- a/drivers/media/video/bt8xx/bttv-i2c.c
+++ b/drivers/media/video/bt8xx/bttv-i2c.c
@@ -479,11 +479,7 @@
if (0 != btv->i2c_rc)
return 0;
- if (btv->use_i2c_hw) {
- return i2c_del_adapter(&btv->c.i2c_adap);
- } else {
- return i2c_bit_del_bus(&btv->c.i2c_adap);
- }
+ return i2c_del_adapter(&btv->c.i2c_adap);
}
/*
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 4b655f2..453af5e 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -1153,7 +1153,7 @@
mutex_lock(&devlist);
cx88_ir_fini(core);
if (0 == core->i2c_rc)
- i2c_bit_del_bus(&core->i2c_adap);
+ i2c_del_adapter(&core->i2c_adap);
list_del(&core->devlist);
iounmap(core->lmmio);
cx88_devcount--;
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index 2b4f197..6068c9b 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -168,7 +168,7 @@
dev->core->board != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
return;
- i2c_bit_del_bus(&vp3054_i2c->adap);
+ i2c_del_adapter(&vp3054_i2c->adap);
kfree(vp3054_i2c);
}
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index 6b6dff4..a373c14 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -782,7 +782,7 @@
static int vino_i2c_del_bus(void)
{
- return i2c_sgi_del_bus(&vino_i2c_adapter);
+ return i2c_del_adapter(&vino_i2c_adapter);
}
static int i2c_camera_command(unsigned int cmd, void *arg)
diff --git a/drivers/media/video/zoran_card.c b/drivers/media/video/zoran_card.c
index 653822c..4d1eb2f 100644
--- a/drivers/media/video/zoran_card.c
+++ b/drivers/media/video/zoran_card.c
@@ -849,7 +849,7 @@
static void
zoran_unregister_i2c (struct zoran *zr)
{
- i2c_bit_del_bus((&zr->i2c_adapter));
+ i2c_del_adapter(&zr->i2c_adapter);
}
/* Check a zoran_params struct for correctness, insert default params */
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 869725a..e7c5b21 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -120,19 +120,19 @@
void radeon_delete_i2c_busses(struct radeonfb_info *rinfo)
{
if (rinfo->i2c[0].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[0].adapter);
+ i2c_del_adapter(&rinfo->i2c[0].adapter);
rinfo->i2c[0].rinfo = NULL;
if (rinfo->i2c[1].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[1].adapter);
+ i2c_del_adapter(&rinfo->i2c[1].adapter);
rinfo->i2c[1].rinfo = NULL;
if (rinfo->i2c[2].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[2].adapter);
+ i2c_del_adapter(&rinfo->i2c[2].adapter);
rinfo->i2c[2].rinfo = NULL;
if (rinfo->i2c[3].rinfo)
- i2c_bit_del_bus(&rinfo->i2c[3].adapter);
+ i2c_del_adapter(&rinfo->i2c[3].adapter);
rinfo->i2c[3].rinfo = NULL;
}
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index b952e45..961f4d4 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -137,15 +137,15 @@
void i810_delete_i2c_busses(struct i810fb_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index 5686e21..33bc41f 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -188,11 +188,11 @@
for (i = 0; i < MAX_OUTPUTS; i++) {
if (dinfo->output[i].i2c_bus.dinfo) {
- i2c_bit_del_bus(&dinfo->output[i].i2c_bus.adapter);
+ i2c_del_adapter(&dinfo->output[i].i2c_bus.adapter);
dinfo->output[i].i2c_bus.dinfo = NULL;
}
if (dinfo->output[i].ddc_bus.dinfo) {
- i2c_bit_del_bus(&dinfo->output[i].ddc_bus.adapter);
+ i2c_del_adapter(&dinfo->output[i].ddc_bus.adapter);
dinfo->output[i].ddc_bus.dinfo = NULL;
}
}
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c
index 795c1a9..797b423 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/matrox/i2c-matroxfb.c
@@ -124,7 +124,7 @@
static void i2c_bit_bus_del(struct i2c_bit_adapter* b) {
if (b->initialized) {
- i2c_bit_del_bus(&b->adapter);
+ i2c_del_adapter(&b->adapter);
b->initialized = 0;
}
}
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index 442e853..8454adf 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -147,15 +147,15 @@
void nvidia_delete_i2c_busses(struct nvidia_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c
index c15b259..01b85e3 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/riva/rivafb-i2c.c
@@ -144,15 +144,15 @@
void riva_delete_i2c_busses(struct riva_par *par)
{
if (par->chan[0].par)
- i2c_bit_del_bus(&par->chan[0].adapter);
+ i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
- i2c_bit_del_bus(&par->chan[1].adapter);
+ i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
- i2c_bit_del_bus(&par->chan[2].adapter);
+ i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index cef5bf5..1411f3b 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -208,7 +208,7 @@
struct savagefb_par *par = info->par;
if (par->chan.par)
- i2c_bit_del_bus(&par->chan.adapter);
+ i2c_del_adapter(&par->chan.adapter);
par->chan.par = NULL;
}
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h
new file mode 100644
index 0000000..92e8d65
--- /dev/null
+++ b/include/asm-arm/arch-pnx4008/i2c.h
@@ -0,0 +1,67 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+
+enum {
+ mstatus_tdi = 0x00000001,
+ mstatus_afi = 0x00000002,
+ mstatus_nai = 0x00000004,
+ mstatus_drmi = 0x00000008,
+ mstatus_active = 0x00000020,
+ mstatus_scl = 0x00000040,
+ mstatus_sda = 0x00000080,
+ mstatus_rff = 0x00000100,
+ mstatus_rfe = 0x00000200,
+ mstatus_tff = 0x00000400,
+ mstatus_tfe = 0x00000800,
+};
+
+enum {
+ mcntrl_tdie = 0x00000001,
+ mcntrl_afie = 0x00000002,
+ mcntrl_naie = 0x00000004,
+ mcntrl_drmie = 0x00000008,
+ mcntrl_daie = 0x00000020,
+ mcntrl_rffie = 0x00000040,
+ mcntrl_tffie = 0x00000080,
+ mcntrl_reset = 0x00000100,
+ mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+ rw_bit = 1 << 0,
+ start_bit = 1 << 8,
+ stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
+#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
+#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
+#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
+#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
+#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
+
+#define HCLK_MHZ 13
+#define I2C_CHIP_NAME "PNX4008-I2C"
+
+#endif /* __ASM_ARCH_I2C_H___ */
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
index c8f8df2..937da70 100644
--- a/include/linux/i2c-algo-bit.h
+++ b/include/linux/i2c-algo-bit.h
@@ -26,9 +26,9 @@
/* --- Defines for bit-adapters --------------------------------------- */
/*
- * This struct contains the hw-dependent functions of bit-style adapters to
+ * This struct contains the hw-dependent functions of bit-style adapters to
* manipulate the line states, and to init any hw-specific features. This is
- * only used if you have more than one hw-type of adapter running.
+ * only used if you have more than one hw-type of adapter running.
*/
struct i2c_algo_bit_data {
void *data; /* private data for lowlevel routines */
@@ -44,6 +44,5 @@
};
int i2c_bit_add_bus(struct i2c_adapter *);
-int i2c_bit_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_BIT_H */
diff --git a/include/linux/i2c-algo-ite.h b/include/linux/i2c-algo-ite.h
deleted file mode 100644
index 0073fe9..0000000
--- a/include/linux/i2c-algo-ite.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters */
-/* ------------------------------------------------------------------------- */
-/* Copyright (C) 1995-97 Simon G. Vogl
- 1998-99 Hans Berglund
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
- Frodo Looijaard <frodol@dds.nl> */
-
-/* Modifications by MontaVista Software, 2001
- Changes made to support the ITE IIC peripheral */
-
-
-#ifndef I2C_ALGO_ITE_H
-#define I2C_ALGO_ITE_H 1
-
-#include <linux/types.h>
-
-/* Example of a sequential read request:
- struct i2c_iic_msg s_msg;
-
- s_msg.addr=device_address;
- s_msg.len=length;
- s_msg.buf=buffer;
- s_msg.waddr=word_address;
- ioctl(file,I2C_SREAD, &s_msg);
- */
-#define I2C_SREAD 0x780 /* SREAD ioctl command */
-
-struct i2c_iic_msg {
- __u16 addr; /* device address */
- __u16 waddr; /* word address */
- short len; /* msg length */
- char *buf; /* pointer to msg data */
-};
-
-#ifdef __KERNEL__
-struct i2c_adapter;
-
-struct i2c_algo_iic_data {
- void *data; /* private data for lolevel routines */
- void (*setiic) (void *data, int ctl, int val);
- int (*getiic) (void *data, int ctl);
- int (*getown) (void *data);
- int (*getclock) (void *data);
- void (*waitforpin) (void);
-
- /* local settings */
- int udelay;
- int mdelay;
- int timeout;
-};
-
-int i2c_iic_add_bus(struct i2c_adapter *);
-int i2c_iic_del_bus(struct i2c_adapter *);
-#endif /* __KERNEL__ */
-#endif /* I2C_ALGO_ITE_H */
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h
index 226693e..fce47c0 100644
--- a/include/linux/i2c-algo-pca.h
+++ b/include/linux/i2c-algo-pca.h
@@ -10,6 +10,5 @@
};
int i2c_pca_add_bus(struct i2c_adapter *);
-int i2c_pca_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_PCA_H */
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 9908f3f..994eb86 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -31,7 +31,7 @@
int (*getpcf) (void *data, int ctl);
int (*getown) (void *data);
int (*getclock) (void *data);
- void (*waitforpin) (void);
+ void (*waitforpin) (void);
/* local settings */
int udelay;
@@ -39,6 +39,5 @@
};
int i2c_pcf_add_bus(struct i2c_adapter *);
-int i2c_pcf_del_bus(struct i2c_adapter *);
#endif /* _LINUX_I2C_ALGO_PCF_H */
diff --git a/include/linux/i2c-algo-sgi.h b/include/linux/i2c-algo-sgi.h
index 4a0113d..3b77150 100644
--- a/include/linux/i2c-algo-sgi.h
+++ b/include/linux/i2c-algo-sgi.h
@@ -22,6 +22,5 @@
};
int i2c_sgi_add_bus(struct i2c_adapter *);
-int i2c_sgi_del_bus(struct i2c_adapter *);
#endif /* I2C_ALGO_SGI_H */
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 0f4cf34..7ae3c332 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c-id.h - identifier values for i2c drivers and adapters */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-1999 Simon G. Vogl
@@ -40,10 +40,10 @@
#define I2C_DRIVERID_SAA7120 11 /* video encoder */
#define I2C_DRIVERID_SAA7121 12 /* video encoder */
#define I2C_DRIVERID_SAA7185B 13 /* video encoder */
-#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
+#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */
#define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */
#define I2C_DRIVERID_PCF8582C 16 /* eeprom */
-#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
+#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */
#define I2C_DRIVERID_TEA6300 18 /* audio mixer */
#define I2C_DRIVERID_BT829 19 /* pc to tv encoder */
#define I2C_DRIVERID_TDA9850 20 /* audio mixer */
@@ -82,9 +82,8 @@
#define I2C_DRIVERID_STM41T00 52 /* real time clock */
#define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */
#define I2C_DRIVERID_ADV7170 54 /* video encoder */
-#define I2C_DRIVERID_RADEON 55 /* I2C bus on Radeon boards */
#define I2C_DRIVERID_MAX1617 56 /* temp sensor */
-#define I2C_DRIVERID_SAA7191 57 /* video encoder */
+#define I2C_DRIVERID_SAA7191 57 /* video decoder */
#define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */
#define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */
#define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */
@@ -132,7 +131,6 @@
#define I2C_DRIVERID_ADM1021 1008
#define I2C_DRIVERID_ADM9240 1009
#define I2C_DRIVERID_LTC1710 1010
-#define I2C_DRIVERID_ICSPLL 1012
#define I2C_DRIVERID_BT869 1013
#define I2C_DRIVERID_MAXILIFE 1014
#define I2C_DRIVERID_MATORB 1015
@@ -165,7 +163,7 @@
* ---- Adapter types ----------------------------------------------------
*/
-/* --- Bit algorithm adapters */
+/* --- Bit algorithm adapters */
#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
#define I2C_HW_B_SER 0x010002 /* Serial line interface */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
@@ -213,9 +211,6 @@
/* --- MPC8xx PowerPC adapters */
#define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */
-/* --- ITE based algorithms */
-#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */
-
/* --- PowerPC on-chip adapters */
#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
new file mode 100644
index 0000000..e6e9c81
--- /dev/null
+++ b/include/linux/i2c-pnx.h
@@ -0,0 +1,43 @@
+/*
+ * Header file for I2C support on PNX010x/4008.
+ *
+ * Author: Dennis Kovalev <dkovalev@ru.mvista.com>
+ *
+ * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __I2C_PNX_H__
+#define __I2C_PNX_H__
+
+#include <asm/arch/i2c.h>
+
+struct i2c_pnx_mif {
+ int ret; /* Return value */
+ int mode; /* Interface mode */
+ struct completion complete; /* I/O completion */
+ struct timer_list timer; /* Timeout */
+ char * buf; /* Data buffer */
+ int len; /* Length of data buffer */
+};
+
+struct i2c_pnx_algo_data {
+ u32 base;
+ u32 ioaddr;
+ int irq;
+ struct i2c_pnx_mif mif;
+ int last;
+};
+
+struct i2c_pnx_data {
+ int (*suspend) (struct platform_device *pdev, pm_message_t state);
+ int (*resume) (struct platform_device *pdev);
+ u32 (*calculate_input_freq) (struct platform_device *pdev);
+ int (*set_clock_run) (struct platform_device *pdev);
+ int (*set_clock_stop) (struct platform_device *pdev);
+ struct i2c_adapter *adapter;
+};
+
+#endif /* __I2C_PNX_H__ */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 9b5d047..71e50d3 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------- */
-/* */
+/* */
/* i2c.h - definitions for the i2c-bus interface */
-/* */
+/* */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-2000 Simon G. Vogl
@@ -27,7 +27,7 @@
#define _LINUX_I2C_H
#include <linux/types.h>
-#ifdef __KERNEL__
+#ifdef __KERNEL__
#include <linux/module.h>
#include <linux/i2c-id.h>
#include <linux/mod_devicetable.h>
@@ -53,8 +53,8 @@
/*
* The master routines are the ones normally used to transmit data to devices
- * on a bus (or read from them). Apart from two basic transfer functions to
- * transmit one message at a time, a more complex version can be used to
+ * on a bus (or read from them). Apart from two basic transfer functions to
+ * transmit one message at a time, a more complex version can be used to
* transmit an arbitrary number of messages without interruption.
*/
extern int i2c_master_send(struct i2c_client *,const char* ,int);
@@ -67,10 +67,10 @@
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
- and probably just as fast.
+ and probably just as fast.
Note that we use i2c_adapter here, because you do not need a specific
smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
+extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data);
@@ -112,14 +112,14 @@
/* Notifies the driver that a new bus has appeared. This routine
* can be used by the driver to test if the bus meets its conditions
- * & seek for the presence of the chip(s) it supports. If found, it
+ * & seek for the presence of the chip(s) it supports. If found, it
* registers the client(s) that are on the bus to the i2c admin. via
* i2c_attach_client.
*/
int (*attach_adapter)(struct i2c_adapter *);
int (*detach_adapter)(struct i2c_adapter *);
- /* tells the driver that a client is about to be deleted & gives it
+ /* tells the driver that a client is about to be deleted & gives it
* the chance to remove its private data. Also, if the client struct
* has been dynamically allocated by the driver in the function above,
* it must be freed here.
@@ -139,13 +139,13 @@
#define I2C_NAME_SIZE 50
/*
- * i2c_client identifies a single device (i.e. chip) that is connected to an
+ * i2c_client identifies a single device (i.e. chip) that is connected to an
* i2c bus. The behaviour is defined by the routines of the driver. This
* function is mainly used for lookup & other admin. functions.
*/
struct i2c_client {
unsigned int flags; /* div., see below */
- unsigned short addr; /* chip address - NOTE: 7bit */
+ unsigned short addr; /* chip address - NOTE: 7bit */
/* addresses are stored in the */
/* _LOWER_ 7 bits */
struct i2c_adapter *adapter; /* the adapter we sit on */
@@ -182,14 +182,14 @@
*/
struct i2c_algorithm {
/* If an adapter algorithm can't do I2C-level access, set master_xfer
- to NULL. If an adapter algorithm can do SMBus access, set
+ to NULL. If an adapter algorithm can do SMBus access, set
smbus_xfer. If set to NULL, the SMBus protocol is simulated
using common I2C messages */
/* master_xfer should return the number of messages successfully
processed, or a negative value on error */
- int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
+ int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
int num);
- int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
+ int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data);
@@ -216,6 +216,7 @@
int (*client_unregister)(struct i2c_client *);
/* data fields that are valid for all devices */
+ u8 level; /* nesting level for lockdep */
struct mutex bus_lock;
struct mutex clist_lock;
@@ -316,7 +317,7 @@
* It will only call found_proc if some client is connected at the
* specific address (unless a 'force' matched);
*/
-extern int i2c_probe(struct i2c_adapter *adapter,
+extern int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int));
@@ -352,15 +353,15 @@
*/
struct i2c_msg {
__u16 addr; /* slave address */
- __u16 flags;
+ __u16 flags;
#define I2C_M_TEN 0x10 /* we have a ten bit chip address */
#define I2C_M_RD 0x01
#define I2C_M_NOSTART 0x4000
#define I2C_M_REV_DIR_ADDR 0x2000
#define I2C_M_IGNORE_NAK 0x1000
#define I2C_M_NO_RD_ACK 0x0800
- __u16 len; /* msg length */
- __u8 *buf; /* pointer to msg data */
+ __u16 len; /* msg length */
+ __u8 *buf; /* pointer to msg data */
};
/* To determine what functionality is present */
@@ -370,16 +371,16 @@
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK 0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_QUICK 0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
@@ -406,10 +407,10 @@
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
-/*
- * Data for SMBus Messages
+/*
+ * Data for SMBus Messages
*/
-#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
+#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
union i2c_smbus_data {
__u8 byte;
__u16 word;
@@ -421,11 +422,11 @@
#define I2C_SMBUS_READ 1
#define I2C_SMBUS_WRITE 0
-/* SMBus transaction types (size parameter in the above functions)
+/* SMBus transaction types (size parameter in the above functions)
Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
#define I2C_SMBUS_QUICK 0
#define I2C_SMBUS_BYTE 1
-#define I2C_SMBUS_BYTE_DATA 2
+#define I2C_SMBUS_BYTE_DATA 2
#define I2C_SMBUS_WORD_DATA 3
#define I2C_SMBUS_PROC_CALL 4
#define I2C_SMBUS_BLOCK_DATA 5
@@ -434,15 +435,15 @@
/* ----- commands for the ioctl like i2c_command call:
- * note that additional calls are defined in the algorithm and hw
- * dependent layers - these can be listed here, or see the
+ * note that additional calls are defined in the algorithm and hw
+ * dependent layers - these can be listed here, or see the
* corresponding header files.
*/
/* -> bit-adapter specific ioctls */
#define I2C_RETRIES 0x0701 /* number of times a device address */
/* should be polled when not */
- /* acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
+ /* acknowledging */
+#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
/* this is for i2c-dev.c */
