Pull misc-for-upstream into release branch
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9141193..856c8b1 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -126,7 +126,8 @@
See header of drivers/scsi/53c7xx.c.
See also Documentation/scsi/ncr53c7xx.txt.
- acpi= [HW,ACPI] Advanced Configuration and Power Interface
+ acpi= [HW,ACPI,X86-64,i386]
+ Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 4a3220b..e2ce4a9 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -7,6 +7,7 @@
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
+ depends on PM
config ACPI
bool "ACPI Support"
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index f289fd4..3ec110c 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -79,11 +79,17 @@
{
int year = dmi_get_year(DMI_BIOS_DATE);
/* Doesn't exist? Likely an old system */
- if (year == -1)
+ if (year == -1) {
+ printk(KERN_ERR PREFIX "no DMI BIOS year, "
+ "acpi=force is required to enable ACPI\n" );
return 1;
+ }
/* 0? Likely a buggy new BIOS */
- if (year == 0)
+ if (year == 0) {
+ printk(KERN_ERR PREFIX "DMI BIOS year==0, "
+ "assuming ACPI-capable machine\n" );
return 0;
+ }
if (year < CONFIG_ACPI_BLACKLIST_YEAR) {
printk(KERN_ERR PREFIX "BIOS age (%d) fails cutoff (%d), "
"acpi=force is required to enable ACPI\n",
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 547eee7..4ffecd1 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -688,13 +688,6 @@
return result;
mutex_lock(&resource->resource_lock);
- if ((resource->state == ACPI_POWER_RESOURCE_STATE_ON) &&
- list_empty(&resource->reference)) {
- mutex_unlock(&resource->resource_lock);
- result = acpi_power_off_device(device->handle, NULL);
- return result;
- }
-
if ((resource->state == ACPI_POWER_RESOURCE_STATE_OFF) &&
!list_empty(&resource->reference)) {
ref = container_of(resource->reference.next, struct acpi_power_reference, node);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 0771b43..00d25b3 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -102,9 +102,9 @@
struct acpi_video_device_attrib {
u32 display_index:4; /* A zero-based instance of the Display */
- u32 display_port_attachment:4; /*This field differenates displays type */
+ u32 display_port_attachment:4; /*This field differentiates the display type */
u32 display_type:4; /*Describe the specific type in use */
- u32 vendor_specific:4; /*Chipset Vendor Specifi */
+ u32 vendor_specific:4; /*Chipset Vendor Specific */
u32 bios_can_detect:1; /*BIOS can detect the device */
u32 depend_on_vga:1; /*Non-VGA output device whose power is related to
the VGA device. */
@@ -484,16 +484,16 @@
* 0. The system BIOS should NOT automatically switch(toggle)
* the active display output.
* 1. The system BIOS should automatically switch (toggle) the
- * active display output. No swich event.
+ * active display output. No switch event.
* 2. The _DGS value should be locked.
* 3. The system BIOS should not automatically switch (toggle) the
* active display output, but instead generate the display switch
* event notify code.
* lcd_flag :
* 0. The system BIOS should automatically control the brightness level
- * of the LCD, when the power changes from AC to DC
+ * of the LCD when the power changes from AC to DC
* 1. The system BIOS should NOT automatically control the brightness
- * level of the LCD, when the power changes from AC to DC.
+ * level of the LCD when the power changes from AC to DC.
* Return Value:
* -1 wrong arg.
*/
@@ -525,7 +525,7 @@
* Return Value:
* None
*
- * Find out all required AML method defined under the output
+ * Find out all required AML methods defined under the output
* device.
*/
@@ -636,7 +636,7 @@
* Return Value:
* None
*
- * Find out all required AML method defined under the video bus device.
+ * Find out all required AML methods defined under the video bus device.
*/
static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
@@ -681,19 +681,19 @@
* to check well known required nodes.
*/
- /* Does this device able to support video switching ? */
+ /* Does this device support video switching? */
if (video->cap._DOS) {
video->flags.multihead = 1;
status = 0;
}
- /* Does this device able to retrieve a retrieve a video ROM ? */
+ /* Does this device support retrieving a video ROM? */
if (video->cap._ROM) {
video->flags.rom = 1;
status = 0;
}
- /* Does this device able to configure which video device to POST ? */
+ /* Does this device support configuring which video device to POST? */
if (video->cap._GPD && video->cap._SPD && video->cap._VPO) {
video->flags.post = 1;
status = 0;
@@ -860,7 +860,7 @@
if (level > 100)
return -EFAULT;
- /* validate though the list of available levels */
+ /* validate through the list of available levels */
for (i = 0; i < dev->brightness->count; i++)
if (level == dev->brightness->levels[i]) {
if (ACPI_SUCCESS
@@ -1065,10 +1065,10 @@
printk(KERN_WARNING PREFIX
"The motherboard VGA device is not listed as a possible POST device.\n");
printk(KERN_WARNING PREFIX
- "This indicate a BIOS bug. Please contact the manufacturer.\n");
+ "This indicates a BIOS bug. Please contact the manufacturer.\n");
}
printk("%lx\n", options);
- seq_printf(seq, "can POST: <intgrated video>");
+ seq_printf(seq, "can POST: <integrated video>");
if (options & 2)
seq_printf(seq, " <PCI video>");
if (options & 4)
@@ -1102,7 +1102,7 @@
seq_printf(seq, "<not supported>\n");
goto end;
}
- seq_printf(seq, "device posted is <%s>\n", device_decode[id & 3]);
+ seq_printf(seq, "device POSTed is <%s>\n", device_decode[id & 3]);
end:
return 0;
@@ -1156,7 +1156,7 @@
if (opt > 3)
return -EFAULT;
- /* just in case an OEM 'forget' the motherboard... */
+ /* just in case an OEM 'forgot' the motherboard... */
options |= 1;
if (options & (1ul << opt)) {
@@ -1527,13 +1527,13 @@
/*
* Arg:
* video : video bus device
- * event : Nontify Event
+ * event : notify event
*
* Return:
* < 0 : error
*
* 1. Find out the current active output device.
- * 2. Identify the next output device to switch
+ * 2. Identify the next output device to switch to.
* 3. call _DSS to do actual switch.
*/
@@ -1723,12 +1723,12 @@
device = video->device;
switch (event) {
- case ACPI_VIDEO_NOTIFY_SWITCH: /* User request that a switch occur,
+ case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch,
* most likely via hotkey. */
acpi_bus_generate_event(device, event, 0);
break;
- case ACPI_VIDEO_NOTIFY_PROBE: /* User plug or remove a video
+ case ACPI_VIDEO_NOTIFY_PROBE: /* User plugged in or removed a video
* connector. */
acpi_video_device_enumerate(video);
acpi_video_device_rebind(video);
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index 295e931..4b23212 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -211,7 +211,7 @@
enum led_brightness value); \
static void object##_led_update(struct work_struct *ignored); \
static int object##_led_wk; \
- DECLARE_WORK(object##_led_work, object##_led_update); \
+ static DECLARE_WORK(object##_led_work, object##_led_update); \
static struct led_classdev object##_led = { \
.name = "asus:" ledname, \
.brightness_set = object##_led_set, \
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
index 2ebe240..ac708bc 100644
--- a/drivers/misc/sony-laptop.c
+++ b/drivers/misc/sony-laptop.c
@@ -453,7 +453,7 @@
static int sony_acpi_add(struct acpi_device *device)
{
acpi_status status;
- int result;
+ int result = 0;
acpi_handle handle;
sony_acpi_acpi_device = device;
