[SCSI] mpt2sas v00.100.11.15
* This is new scsi lld device driver from LSI supporting the SAS 2.0
standard. I have split patchs by filename.
* Here is list of new 6gb host controllers:
LSI SAS2004
LSI SAS2008
LSI SAS2108
LSI SAS2116
* Here are the changes in the 4th posting of this patch set:
(1) fix compile errors when SCSI_MPT2SAS_LOGGING is not enabled
(2) add mpt2sas to the SCSI Mid Layer Makefile
(3) append mpt2sas_ to the naming of all non-static functions
(4) fix oops for SMP_PASSTHRU
(5) doorbell algorithm imported changes from windows driver
* Here are the changes in the 3rd posting of this patch set:
(1) add readl following writel from the function that disables interrupts
(2) replace 0xFFFFFFFFFFFFFFFFULL with ~0ULL
(3) when calling pci_enable_msix, only pass one msix entry (instead of 15).
(4) remove the "current HW implementation uses..... " comment in the sources
(5) merged bug fix for SIGIO/POLLIN notifcation; reported by the storlib team.
* Here are the changes in the 2nd posting of this patch set:
(1) use little endian types in the mpi headers
(2) merged in bug fix's from inhouse drivers.
Signed-off-by: Eric Moore <eric.moore@lsi.com>
Tested-by: peter Bogdanovic <pbog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
new file mode 100644
index 0000000..50865a8
--- /dev/null
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -0,0 +1,5687 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
+ * Copyright (C) 2007-2008 LSI Corporation
+ * (mailto:DL-MPTFusionLinux@lsi.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+ * USA.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/blkdev.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include "mpt2sas_base.h"
+
+MODULE_AUTHOR(MPT2SAS_AUTHOR);
+MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MPT2SAS_DRIVER_VERSION);
+
+#define RAID_CHANNEL 1
+
+/* forward proto's */
+static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_node *sas_expander);
+static void _firmware_event_work(struct work_struct *work);
+
+/* global parameters */
+LIST_HEAD(ioc_list);
+
+/* local parameters */
+static u32 logging_level;
+static u8 scsi_io_cb_idx = -1;
+static u8 tm_cb_idx = -1;
+static u8 ctl_cb_idx = -1;
+static u8 base_cb_idx = -1;
+static u8 transport_cb_idx = -1;
+static u8 config_cb_idx = -1;
+static int mpt_ids;
+
+/* command line options */
+MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info "
+ "(default=0)");
+
+/* scsi-mid layer global parmeter is max_report_luns, which is 511 */
+#define MPT2SAS_MAX_LUN (16895)
+static int max_lun = MPT2SAS_MAX_LUN;
+module_param(max_lun, int, 0);
+MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
+
+/**
+ * struct sense_info - common structure for obtaining sense keys
+ * @skey: sense key
+ * @asc: additional sense code
+ * @ascq: additional sense code qualifier
+ */
+struct sense_info {
+ u8 skey;
+ u8 asc;
+ u8 ascq;
+};
+
+
+#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
+/**
+ * struct fw_event_work - firmware event struct
+ * @list: link list framework
+ * @work: work object (ioc->fault_reset_work_q)
+ * @ioc: per adapter object
+ * @VF_ID: virtual function id
+ * @host_reset_handling: handling events during host reset
+ * @ignore: flag meaning this event has been marked to ignore
+ * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
+ * @event_data: reply event data payload follows
+ *
+ * This object stored on ioc->fw_event_list.
+ */
+struct fw_event_work {
+ struct list_head list;
+ struct delayed_work work;
+ struct MPT2SAS_ADAPTER *ioc;
+ u8 VF_ID;
+ u8 host_reset_handling;
+ u8 ignore;
+ u16 event;
+ void *event_data;
+};
+
+/**
+ * struct _scsi_io_transfer - scsi io transfer
+ * @handle: sas device handle (assigned by firmware)
+ * @is_raid: flag set for hidden raid components
+ * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
+ * @data_length: data transfer length
+ * @data_dma: dma pointer to data
+ * @sense: sense data
+ * @lun: lun number
+ * @cdb_length: cdb length
+ * @cdb: cdb contents
+ * @valid_reply: flag set for reply message
+ * @timeout: timeout for this command
+ * @sense_length: sense length
+ * @ioc_status: ioc status
+ * @scsi_state: scsi state
+ * @scsi_status: scsi staus
+ * @log_info: log information
+ * @transfer_length: data length transfer when there is a reply message
+ *
+ * Used for sending internal scsi commands to devices within this module.
+ * Refer to _scsi_send_scsi_io().
+ */
+struct _scsi_io_transfer {
+ u16 handle;
+ u8 is_raid;
+ enum dma_data_direction dir;
+ u32 data_length;
+ dma_addr_t data_dma;
+ u8 sense[SCSI_SENSE_BUFFERSIZE];
+ u32 lun;
+ u8 cdb_length;
+ u8 cdb[32];
+ u8 timeout;
+ u8 valid_reply;
+ /* the following bits are only valid when 'valid_reply = 1' */
+ u32 sense_length;
+ u16 ioc_status;
+ u8 scsi_state;
+ u8 scsi_status;
+ u32 log_info;
+ u32 transfer_length;
+};
+
+/*
+ * The pci device ids are defined in mpi/mpi2_cnfg.h.
+ */
+static struct pci_device_id scsih_pci_table[] = {
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Falcon ~ 2008*/
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
+ PCI_ANY_ID, PCI_ANY_ID },
+ /* Liberator ~ 2108 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ {0} /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, scsih_pci_table);
+
+/**
+ * scsih_set_debug_level - global setting of ioc->logging_level.
+ *
+ * Note: The logging levels are defined in mpt2sas_debug.h.
+ */
+static int
+scsih_set_debug_level(const char *val, struct kernel_param *kp)
+{
+ int ret = param_set_int(val, kp);
+ struct MPT2SAS_ADAPTER *ioc;
+
+ if (ret)
+ return ret;
+
+ printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level);
+ list_for_each_entry(ioc, &ioc_list, list)
+ ioc->logging_level = logging_level;
+ return 0;
+}
+module_param_call(logging_level, scsih_set_debug_level, param_get_int,
+ &logging_level, 0644);
+
+/**
+ * _scsih_srch_boot_sas_address - search based on sas_address
+ * @sas_address: sas address
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_sas_address(u64 sas_address,
+ Mpi2BootDeviceSasWwid_t *boot_device)
+{
+ return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_device_name - search based on device name
+ * @device_name: device name specified in INDENTIFY fram
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_device_name(u64 device_name,
+ Mpi2BootDeviceDeviceName_t *boot_device)
+{
+ return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
+}
+
+/**
+ * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
+ * @enclosure_logical_id: enclosure logical id
+ * @slot_number: slot number
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static inline int
+_scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
+ Mpi2BootDeviceEnclosureSlot_t *boot_device)
+{
+ return (enclosure_logical_id == le64_to_cpu(boot_device->
+ EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
+ SlotNumber)) ? 1 : 0;
+}
+
+/**
+ * _scsih_is_boot_device - search for matching boot device.
+ * @sas_address: sas address
+ * @device_name: device name specified in INDENTIFY fram
+ * @enclosure_logical_id: enclosure logical id
+ * @slot_number: slot number
+ * @form: specifies boot device form
+ * @boot_device: boot device object from bios page 2
+ *
+ * Returns 1 when there's a match, 0 means no match.
+ */
+static int
+_scsih_is_boot_device(u64 sas_address, u64 device_name,
+ u64 enclosure_logical_id, u16 slot, u8 form,
+ Mpi2BiosPage2BootDevice_t *boot_device)
+{
+ int rc = 0;
+
+ switch (form) {
+ case MPI2_BIOSPAGE2_FORM_SAS_WWID:
+ if (!sas_address)
+ break;
+ rc = _scsih_srch_boot_sas_address(
+ sas_address, &boot_device->SasWwid);
+ break;
+ case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
+ if (!enclosure_logical_id)
+ break;
+ rc = _scsih_srch_boot_encl_slot(
+ enclosure_logical_id,
+ slot, &boot_device->EnclosureSlot);
+ break;
+ case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
+ if (!device_name)
+ break;
+ rc = _scsih_srch_boot_device_name(
+ device_name, &boot_device->DeviceName);
+ break;
+ case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
+ break;
+ }
+
+ return rc;
+}
+
+/**
+ * _scsih_determine_boot_device - determine boot device.
+ * @ioc: per adapter object
+ * @device: either sas_device or raid_device object
+ * @is_raid: [flag] 1 = raid object, 0 = sas object
+ *
+ * Determines whether this device should be first reported device to
+ * to scsi-ml or sas transport, this purpose is for persistant boot device.
+ * There are primary, alternate, and current entries in bios page 2. The order
+ * priority is primary, alternate, then current. This routine saves
+ * the corresponding device object and is_raid flag in the ioc object.
+ * The saved data to be used later in _scsih_probe_boot_devices().
+ */
+static void
+_scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc,
+ void *device, u8 is_raid)
+{
+ struct _sas_device *sas_device;
+ struct _raid_device *raid_device;
+ u64 sas_address;
+ u64 device_name;
+ u64 enclosure_logical_id;
+ u16 slot;
+
+ /* only process this function when driver loads */
+ if (!ioc->wait_for_port_enable_to_complete)
+ return;
+
+ if (!is_raid) {
+ sas_device = device;
+ sas_address = sas_device->sas_address;
+ device_name = sas_device->device_name;
+ enclosure_logical_id = sas_device->enclosure_logical_id;
+ slot = sas_device->slot;
+ } else {
+ raid_device = device;
+ sas_address = raid_device->wwid;
+ device_name = 0;
+ enclosure_logical_id = 0;
+ slot = 0;
+ }
+
+ if (!ioc->req_boot_device.device) {
+ if (_scsih_is_boot_device(sas_address, device_name,
+ enclosure_logical_id, slot,
+ (ioc->bios_pg2.ReqBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK),
+ &ioc->bios_pg2.RequestedBootDevice)) {
+ dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ "%s: req_boot_device(0x%016llx)\n",
+ ioc->name, __func__,
+ (unsigned long long)sas_address));
+ ioc->req_boot_device.device = device;
+ ioc->req_boot_device.is_raid = is_raid;
+ }
+ }
+
+ if (!ioc->req_alt_boot_device.device) {
+ if (_scsih_is_boot_device(sas_address, device_name,
+ enclosure_logical_id, slot,
+ (ioc->bios_pg2.ReqAltBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK),
+ &ioc->bios_pg2.RequestedAltBootDevice)) {
+ dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ "%s: req_alt_boot_device(0x%016llx)\n",
+ ioc->name, __func__,
+ (unsigned long long)sas_address));
+ ioc->req_alt_boot_device.device = device;
+ ioc->req_alt_boot_device.is_raid = is_raid;
+ }
+ }
+
+ if (!ioc->current_boot_device.device) {
+ if (_scsih_is_boot_device(sas_address, device_name,
+ enclosure_logical_id, slot,
+ (ioc->bios_pg2.CurrentBootDeviceForm &
+ MPI2_BIOSPAGE2_FORM_MASK),
+ &ioc->bios_pg2.CurrentBootDevice)) {
+ dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ "%s: current_boot_device(0x%016llx)\n",
+ ioc->name, __func__,
+ (unsigned long long)sas_address));
+ ioc->current_boot_device.device = device;
+ ioc->current_boot_device.is_raid = is_raid;
+ }
+ }
+}
+
+/**
+ * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+struct _sas_device *
+mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
+ u64 sas_address)
+{
+ struct _sas_device *sas_device, *r;
+
+ r = NULL;
+ /* check the sas_device_init_list */
+ list_for_each_entry(sas_device, &ioc->sas_device_init_list,
+ list) {
+ if (sas_device->sas_address != sas_address)
+ continue;
+ r = sas_device;
+ goto out;
+ }
+
+ /* then check the sas_device_list */
+ list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+ if (sas_device->sas_address != sas_address)
+ continue;
+ r = sas_device;
+ goto out;
+ }
+ out:
+ return r;
+}
+
+/**
+ * _scsih_sas_device_find_by_handle - sas device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for sas_device based on sas_address, then return sas_device
+ * object.
+ */
+static struct _sas_device *
+_scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _sas_device *sas_device, *r;
+
+ r = NULL;
+ if (ioc->wait_for_port_enable_to_complete) {
+ list_for_each_entry(sas_device, &ioc->sas_device_init_list,
+ list) {
+ if (sas_device->handle != handle)
+ continue;
+ r = sas_device;
+ goto out;
+ }
+ } else {
+ list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+ if (sas_device->handle != handle)
+ continue;
+ r = sas_device;
+ goto out;
+ }
+ }
+
+ out:
+ return r;
+}
+
+/**
+ * _scsih_sas_device_remove - remove sas_device from list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Removing object and freeing associated memory from the ioc->sas_device_list.
+ */
+static void
+_scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_device *sas_device)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_del(&sas_device->list);
+ memset(sas_device, 0, sizeof(struct _sas_device));
+ kfree(sas_device);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_sas_device_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object to the ioc->sas_device_list.
+ */
+static void
+_scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_device *sas_device)
+{
+ unsigned long flags;
+ u16 handle, parent_handle;
+ u64 sas_address;
+
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
+ "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
+ sas_device->handle, (unsigned long long)sas_device->sas_address));
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_add_tail(&sas_device->list, &ioc->sas_device_list);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ handle = sas_device->handle;
+ parent_handle = sas_device->parent_handle;
+ sas_address = sas_device->sas_address;
+ if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ _scsih_sas_device_remove(ioc, sas_device);
+ } else if (!sas_device->starget) {
+ mpt2sas_transport_port_remove(ioc, sas_address, parent_handle);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
+}
+
+/**
+ * _scsih_sas_device_init_add - insert sas_device to the list.
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * Context: This function will acquire ioc->sas_device_lock.
+ *
+ * Adding new object at driver load time to the ioc->sas_device_init_list.
+ */
+static void
+_scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_device *sas_device)
+{
+ unsigned long flags;
+
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
+ "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
+ sas_device->handle, (unsigned long long)sas_device->sas_address));
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ _scsih_determine_boot_device(ioc, sas_device, 0);
+}
+
+/**
+ * mpt2sas_scsih_expander_find_by_handle - expander device search
+ * @ioc: per adapter object
+ * @handle: expander handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for expander device based on handle, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _sas_node *sas_expander, *r;
+
+ r = NULL;
+ list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+ if (sas_expander->handle != handle)
+ continue;
+ r = sas_expander;
+ goto out;
+ }
+ out:
+ return r;
+}
+
+/**
+ * _scsih_raid_device_find_by_id - raid device search
+ * @ioc: per adapter object
+ * @id: sas device target id
+ * @channel: sas device channel
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on target id, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel)
+{
+ struct _raid_device *raid_device, *r;
+
+ r = NULL;
+ list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+ if (raid_device->id == id && raid_device->channel == channel) {
+ r = raid_device;
+ goto out;
+ }
+ }
+
+ out:
+ return r;
+}
+
+/**
+ * _scsih_raid_device_find_by_handle - raid device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on handle, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _raid_device *raid_device, *r;
+
+ r = NULL;
+ list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+ if (raid_device->handle != handle)
+ continue;
+ r = raid_device;
+ goto out;
+ }
+
+ out:
+ return r;
+}
+
+/**
+ * _scsih_raid_device_find_by_wwid - raid device search
+ * @ioc: per adapter object
+ * @handle: sas device handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->raid_device_lock
+ *
+ * This searches for raid_device based on wwid, then return raid_device
+ * object.
+ */
+static struct _raid_device *
+_scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid)
+{
+ struct _raid_device *raid_device, *r;
+
+ r = NULL;
+ list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+ if (raid_device->wwid != wwid)
+ continue;
+ r = raid_device;
+ goto out;
+ }
+
+ out:
+ return r;
+}
+
+/**
+ * _scsih_raid_device_add - add raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ * This is added to the raid_device_list link list.
+ */
+static void
+_scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device)
+{
+ unsigned long flags;
+
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
+ "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
+ raid_device->handle, (unsigned long long)raid_device->wwid));
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ list_add_tail(&raid_device->list, &ioc->raid_device_list);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_raid_device_remove - delete raid_device object
+ * @ioc: per adapter object
+ * @raid_device: raid_device object
+ *
+ * This is removed from the raid_device_list link list.
+ */
+static void
+_scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ list_del(&raid_device->list);
+ memset(raid_device, 0, sizeof(struct _raid_device));
+ kfree(raid_device);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * mpt2sas_scsih_expander_find_by_sas_address - expander device search
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * This searches for expander device based on sas_address, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
+ u64 sas_address)
+{
+ struct _sas_node *sas_expander, *r;
+
+ r = NULL;
+ list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+ if (sas_expander->sas_address != sas_address)
+ continue;
+ r = sas_expander;
+ goto out;
+ }
+ out:
+ return r;
+}
+
+/**
+ * _scsih_expander_node_add - insert expander device to the list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ * Context: This function will acquire ioc->sas_node_lock.
+ *
+ * Adding new object to the ioc->sas_expander_list.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_node *sas_expander)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_is_end_device - determines if device is an end device
+ * @device_info: bitfield providing information about the device.
+ * Context: none
+ *
+ * Returns 1 if end device.
+ */
+static int
+_scsih_is_end_device(u32 device_info)
+{
+ if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
+ ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
+ (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
+ (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * _scsih_scsi_lookup_get - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * Returns the smid stored scmd pointer.
+ */
+static struct scsi_cmnd *
+_scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+ unsigned long flags;
+ struct scsi_cmnd *scmd;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ scmd = ioc->scsi_lookup[smid - 1].scmd;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return scmd;
+}
+
+/**
+ * mptscsih_getclear_scsi_lookup - returns scmd entry
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * Returns the smid stored scmd pointer, as well as clearing the scmd pointer.
+ */
+static struct scsi_cmnd *
+_scsih_scsi_lookup_getclear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+ unsigned long flags;
+ struct scsi_cmnd *scmd;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ scmd = ioc->scsi_lookup[smid - 1].scmd;
+ ioc->scsi_lookup[smid - 1].scmd = NULL;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return scmd;
+}
+
+/**
+ * _scsih_scsi_lookup_set - updates scmd entry in lookup
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @scmd: pointer to scsi command object
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will save scmd pointer in the scsi_lookup array.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_scsi_lookup_set(struct MPT2SAS_ADAPTER *ioc, u16 smid,
+ struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ ioc->scsi_lookup[smid - 1].scmd = scmd;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+}
+
+/**
+ * _scsih_scsi_lookup_find_by_scmd - scmd lookup
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @scmd: pointer to scsi command object
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a scmd pointer in the scsi_lookup array,
+ * returning the revelent smid. A returned value of zero means invalid.
+ */
+static u16
+_scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd
+ *scmd)
+{
+ u16 smid;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ smid = 0;
+ for (i = 0; i < ioc->request_depth; i++) {
+ if (ioc->scsi_lookup[i].scmd == scmd) {
+ smid = i + 1;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+/**
+ * _scsih_scsi_lookup_find_by_target - search for matching channel:id
+ * @ioc: per adapter object
+ * @id: target id
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
+ int channel)
+{
+ u8 found;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ found = 0;
+ for (i = 0 ; i < ioc->request_depth; i++) {
+ if (ioc->scsi_lookup[i].scmd &&
+ (ioc->scsi_lookup[i].scmd->device->id == id &&
+ ioc->scsi_lookup[i].scmd->device->channel == channel)) {
+ found = 1;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return found;
+}
+
+/**
+ * _scsih_get_chain_buffer_dma - obtain block of chains (dma address)
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns phys pointer to chain buffer.
+ */
+static dma_addr_t
+_scsih_get_chain_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+ return ioc->chain_dma + ((smid - 1) * (ioc->request_sz *
+ ioc->chains_needed_per_io));
+}
+
+/**
+ * _scsih_get_chain_buffer - obtain block of chains assigned to a mf request
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns virt pointer to chain buffer.
+ */
+static void *
+_scsih_get_chain_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+ return (void *)(ioc->chain + ((smid - 1) * (ioc->request_sz *
+ ioc->chains_needed_per_io)));
+}
+
+/**
+ * _scsih_build_scatter_gather - main sg creation routine
+ * @ioc: per adapter object
+ * @scmd: scsi command
+ * @smid: system request message index
+ * Context: none.
+ *
+ * The main routine that builds scatter gather table from a given
+ * scsi request sent via the .queuecommand main handler.
+ *
+ * Returns 0 success, anything else error
+ */
+static int
+_scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
+ struct scsi_cmnd *scmd, u16 smid)
+{
+ Mpi2SCSIIORequest_t *mpi_request;
+ dma_addr_t chain_dma;
+ struct scatterlist *sg_scmd;
+ void *sg_local, *chain;
+ u32 chain_offset;
+ u32 chain_length;
+ u32 chain_flags;
+ u32 sges_left;
+ u32 sges_in_segment;
+ u32 sgl_flags;
+ u32 sgl_flags_last_element;
+ u32 sgl_flags_end_buffer;
+
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+
+ /* init scatter gather flags */
+ sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
+ if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
+ sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
+ MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
+ << MPI2_SGE_FLAGS_SHIFT;
+ sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
+
+ sg_scmd = scsi_sglist(scmd);
+ sges_left = scsi_dma_map(scmd);
+ if (!sges_left) {
+ sdev_printk(KERN_ERR, scmd->device, "pci_map_sg"
+ " failed: request for %d bytes!\n", scsi_bufflen(scmd));
+ return -ENOMEM;
+ }
+
+ sg_local = &mpi_request->SGL;
+ sges_in_segment = ioc->max_sges_in_main_message;
+ if (sges_left <= sges_in_segment)
+ goto fill_in_last_segment;
+
+ mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
+ (sges_in_segment * ioc->sge_size))/4;
+
+ /* fill in main message segment when there is a chain following */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element | sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ /* initializing the chain flags and pointers */
+ chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
+ chain = _scsih_get_chain_buffer(ioc, smid);
+ chain_dma = _scsih_get_chain_buffer_dma(ioc, smid);
+ do {
+ sges_in_segment = (sges_left <=
+ ioc->max_sges_in_chain_message) ? sges_left :
+ ioc->max_sges_in_chain_message;
+ chain_offset = (sges_left == sges_in_segment) ?
+ 0 : (sges_in_segment * ioc->sge_size)/4;
+ chain_length = sges_in_segment * ioc->sge_size;
+ if (chain_offset) {
+ chain_offset = chain_offset <<
+ MPI2_SGE_CHAIN_OFFSET_SHIFT;
+ chain_length += ioc->sge_size;
+ }
+ ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
+ chain_length, chain_dma);
+ sg_local = chain;
+ if (!chain_offset)
+ goto fill_in_last_segment;
+
+ /* fill in chain segments */
+ while (sges_in_segment) {
+ if (sges_in_segment == 1)
+ ioc->base_add_sg_single(sg_local,
+ sgl_flags_last_element |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd),
+ sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ sges_in_segment--;
+ }
+
+ chain_dma += ioc->request_sz;
+ chain += ioc->request_sz;
+ } while (1);
+
+
+ fill_in_last_segment:
+
+ /* fill the last segment */
+ while (sges_left) {
+ if (sges_left == 1)
+ ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ else
+ ioc->base_add_sg_single(sg_local, sgl_flags |
+ sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
+ sg_scmd = sg_next(sg_scmd);
+ sg_local += ioc->sge_size;
+ sges_left--;
+ }
+
+ return 0;
+}
+
+/**
+ * scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ *
+ * Returns queue depth.
+ */
+static int
+scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+{
+ struct Scsi_Host *shost = sdev->host;
+ int max_depth;
+ int tag_type;
+
+ max_depth = shost->can_queue;
+ if (!sdev->tagged_supported)
+ max_depth = 1;
+ if (qdepth > max_depth)
+ qdepth = max_depth;
+ tag_type = (qdepth == 1) ? 0 : MSG_SIMPLE_TAG;
+ scsi_adjust_queue_depth(sdev, tag_type, qdepth);
+
+ if (sdev->inquiry_len > 7)
+ sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), "
+ "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
+ sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags,
+ sdev->ordered_tags, sdev->scsi_level,
+ (sdev->inquiry[7] & 2) >> 1);
+
+ return sdev->queue_depth;
+}
+
+/**
+ * scsih_change_queue_depth - changing device queue tag type
+ * @sdev: scsi device struct
+ * @tag_type: requested tag type
+ *
+ * Returns queue tag type.
+ */
+static int
+scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
+{
+ if (sdev->tagged_supported) {
+ scsi_set_tag_type(sdev, tag_type);
+ if (tag_type)
+ scsi_activate_tcq(sdev, sdev->queue_depth);
+ else
+ scsi_deactivate_tcq(sdev, sdev->queue_depth);
+ } else
+ tag_type = 0;
+
+ return tag_type;
+}
+
+/**
+ * scsih_target_alloc - target add routine
+ * @starget: scsi target struct
+ *
+ * Returns 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_target_alloc(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _sas_device *sas_device;
+ struct _raid_device *raid_device;
+ unsigned long flags;
+ struct sas_rphy *rphy;
+
+ sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL);
+ if (!sas_target_priv_data)
+ return -ENOMEM;
+
+ starget->hostdata = sas_target_priv_data;
+ sas_target_priv_data->starget = starget;
+ sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
+
+ /* RAID volumes */
+ if (starget->channel == RAID_CHANNEL) {
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+ starget->channel);
+ if (raid_device) {
+ sas_target_priv_data->handle = raid_device->handle;
+ sas_target_priv_data->sas_address = raid_device->wwid;
+ sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
+ raid_device->starget = starget;
+ }
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ return 0;
+ }
+
+ /* sas/sata devices */
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ rphy = dev_to_rphy(starget->dev.parent);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ rphy->identify.sas_address);
+
+ if (sas_device) {
+ sas_target_priv_data->handle = sas_device->handle;
+ sas_target_priv_data->sas_address = sas_device->sas_address;
+ sas_device->starget = starget;
+ sas_device->id = starget->id;
+ sas_device->channel = starget->channel;
+ if (sas_device->hidden_raid_component)
+ sas_target_priv_data->flags |=
+ MPT_TARGET_FLAGS_RAID_COMPONENT;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ return 0;
+}
+
+/**
+ * scsih_target_destroy - target destroy routine
+ * @starget: scsi target struct
+ *
+ * Returns nothing.
+ */
+static void
+scsih_target_destroy(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _sas_device *sas_device;
+ struct _raid_device *raid_device;
+ unsigned long flags;
+ struct sas_rphy *rphy;
+
+ sas_target_priv_data = starget->hostdata;
+ if (!sas_target_priv_data)
+ return;
+
+ if (starget->channel == RAID_CHANNEL) {
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
+ starget->channel);
+ if (raid_device) {
+ raid_device->starget = NULL;
+ raid_device->sdev = NULL;
+ }
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ goto out;
+ }
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ rphy = dev_to_rphy(starget->dev.parent);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ rphy->identify.sas_address);
+ if (sas_device)
+ sas_device->starget = NULL;
+
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ out:
+ kfree(sas_target_priv_data);
+ starget->hostdata = NULL;
+}
+
+/**
+ * scsih_slave_alloc - device add routine
+ * @sdev: scsi device struct
+ *
+ * Returns 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_slave_alloc(struct scsi_device *sdev)
+{
+ struct Scsi_Host *shost;
+ struct MPT2SAS_ADAPTER *ioc;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct scsi_target *starget;
+ struct _raid_device *raid_device;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+
+ sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL);
+ if (!sas_device_priv_data)
+ return -ENOMEM;
+
+ sas_device_priv_data->lun = sdev->lun;
+ sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
+
+ starget = scsi_target(sdev);
+ sas_target_priv_data = starget->hostdata;
+ sas_target_priv_data->num_luns++;
+ sas_device_priv_data->sas_target = sas_target_priv_data;
+ sdev->hostdata = sas_device_priv_data;
+ if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
+ sdev->no_uld_attach = 1;
+
+ shost = dev_to_shost(&starget->dev);
+ ioc = shost_priv(shost);
+ if (starget->channel == RAID_CHANNEL) {
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_id(ioc,
+ starget->id, starget->channel);
+ if (raid_device)
+ raid_device->sdev = sdev; /* raid is single lun */
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ } else {
+ /* set TLR bit for SSP devices */
+ if (!(ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_TLR))
+ goto out;
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device_priv_data->sas_target->sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_device && sas_device->device_info &
+ MPI2_SAS_DEVICE_INFO_SSP_TARGET)
+ sas_device_priv_data->flags |= MPT_DEVICE_TLR_ON;
+ }
+
+ out:
+ return 0;
+}
+
+/**
+ * scsih_slave_destroy - device destroy routine
+ * @sdev: scsi device struct
+ *
+ * Returns nothing.
+ */
+static void
+scsih_slave_destroy(struct scsi_device *sdev)
+{
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct scsi_target *starget;
+
+ if (!sdev->hostdata)
+ return;
+
+ starget = scsi_target(sdev);
+ sas_target_priv_data = starget->hostdata;
+ sas_target_priv_data->num_luns--;
+ kfree(sdev->hostdata);
+ sdev->hostdata = NULL;
+}
+
+/**
+ * scsih_display_sata_capabilities - sata capabilities
+ * @ioc: per adapter object
+ * @sas_device: the sas_device object
+ * @sdev: scsi device struct
+ */
+static void
+scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_device *sas_device, struct scsi_device *sdev)
+{
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ u32 ioc_status;
+ u16 flags;
+ u32 device_info;
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, sas_device->handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ flags = le16_to_cpu(sas_device_pg0.Flags);
+ device_info = le16_to_cpu(sas_device_pg0.DeviceInfo);
+
+ sdev_printk(KERN_INFO, sdev,
+ "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
+ "sw_preserve(%s)\n",
+ (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
+ (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
+ (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
+ "n",
+ (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
+ (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
+ (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
+}
+
+/**
+ * _scsih_get_volume_capabilities - volume capabilities
+ * @ioc: per adapter object
+ * @sas_device: the raid_device object
+ */
+static void
+_scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device)
+{
+ Mpi2RaidVolPage0_t *vol_pg0;
+ Mpi2RaidPhysDiskPage0_t pd_pg0;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 sz;
+ u8 num_pds;
+
+ if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
+ &num_pds)) || !num_pds) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ raid_device->num_pds = num_pds;
+ sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+ sizeof(Mpi2RaidVol0PhysDisk_t));
+ vol_pg0 = kzalloc(sz, GFP_KERNEL);
+ if (!vol_pg0) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+ MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ kfree(vol_pg0);
+ return;
+ }
+
+ raid_device->volume_type = vol_pg0->VolumeType;
+
+ /* figure out what the underlying devices are by
+ * obtaining the device_info bits for the 1st device
+ */
+ if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+ &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+ vol_pg0->PhysDisk[0].PhysDiskNum))) {
+ if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+ le16_to_cpu(pd_pg0.DevHandle)))) {
+ raid_device->device_info =
+ le32_to_cpu(sas_device_pg0.DeviceInfo);
+ }
+ }
+
+ kfree(vol_pg0);
+}
+
+/**
+ * scsih_slave_configure - device configure routine.
+ * @sdev: scsi device struct
+ *
+ * Returns 0 if ok. Any other return is assumed to be an error and
+ * the device is ignored.
+ */
+static int
+scsih_slave_configure(struct scsi_device *sdev)
+{
+ struct Scsi_Host *shost = sdev->host;
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _sas_device *sas_device;
+ struct _raid_device *raid_device;
+ unsigned long flags;
+ int qdepth;
+ u8 ssp_target = 0;
+ char *ds = "";
+ char *r_level = "";
+
+ qdepth = 1;
+ sas_device_priv_data = sdev->hostdata;
+ sas_device_priv_data->configured_lun = 1;
+ sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
+ sas_target_priv_data = sas_device_priv_data->sas_target;
+
+ /* raid volume handling */
+ if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_handle(ioc,
+ sas_target_priv_data->handle);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ if (!raid_device) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return 0;
+ }
+
+ _scsih_get_volume_capabilities(ioc, raid_device);
+
+ /* RAID Queue Depth Support
+ * IS volume = underlying qdepth of drive type, either
+ * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH
+ * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH)
+ */
+ if (raid_device->device_info &
+ MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+ qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
+ ds = "SSP";
+ } else {
+ qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
+ if (raid_device->device_info &
+ MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "SATA";
+ else
+ ds = "STP";
+ }
+
+ switch (raid_device->volume_type) {
+ case MPI2_RAID_VOL_TYPE_RAID0:
+ r_level = "RAID0";
+ break;
+ case MPI2_RAID_VOL_TYPE_RAID1E:
+ qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
+ r_level = "RAID1E";
+ break;
+ case MPI2_RAID_VOL_TYPE_RAID1:
+ qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
+ r_level = "RAID1";
+ break;
+ case MPI2_RAID_VOL_TYPE_RAID10:
+ qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
+ r_level = "RAID10";
+ break;
+ case MPI2_RAID_VOL_TYPE_UNKNOWN:
+ default:
+ qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
+ r_level = "RAIDX";
+ break;
+ }
+
+ sdev_printk(KERN_INFO, sdev, "%s: "
+ "handle(0x%04x), wwid(0x%016llx), pd_count(%d), type(%s)\n",
+ r_level, raid_device->handle,
+ (unsigned long long)raid_device->wwid,
+ raid_device->num_pds, ds);
+ scsih_change_queue_depth(sdev, qdepth);
+ return 0;
+ }
+
+ /* non-raid handling */
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device_priv_data->sas_target->sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_device) {
+ if (sas_target_priv_data->flags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT) {
+ mpt2sas_config_get_volume_handle(ioc,
+ sas_device->handle, &sas_device->volume_handle);
+ mpt2sas_config_get_volume_wwid(ioc,
+ sas_device->volume_handle,
+ &sas_device->volume_wwid);
+ }
+ if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
+ qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
+ ssp_target = 1;
+ ds = "SSP";
+ } else {
+ qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
+ if (sas_device->device_info &
+ MPI2_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "STP";
+ else if (sas_device->device_info &
+ MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "SATA";
+ }
+
+ sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
+ "sas_addr(0x%016llx), device_name(0x%016llx)\n",
+ ds, sas_device->handle,
+ (unsigned long long)sas_device->sas_address,
+ (unsigned long long)sas_device->device_name);
+ sdev_printk(KERN_INFO, sdev, "%s: "
+ "enclosure_logical_id(0x%016llx), slot(%d)\n", ds,
+ (unsigned long long) sas_device->enclosure_logical_id,
+ sas_device->slot);
+
+ if (!ssp_target)
+ scsih_display_sata_capabilities(ioc, sas_device, sdev);
+ }
+
+ scsih_change_queue_depth(sdev, qdepth);
+
+ if (ssp_target)
+ sas_read_port_mode_page(sdev);
+ return 0;
+}
+
+/**
+ * scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * @sdev: scsi device struct
+ * @bdev: pointer to block device context
+ * @capacity: device size (in 512 byte sectors)
+ * @params: three element array to place output:
+ * params[0] number of heads (max 255)
+ * params[1] number of sectors (max 63)
+ * params[2] number of cylinders
+ *
+ * Return nothing.
+ */
+static int
+scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int params[])
+{
+ int heads;
+ int sectors;
+ sector_t cylinders;
+ ulong dummy;
+
+ heads = 64;
+ sectors = 32;
+
+ dummy = heads * sectors;
+ cylinders = capacity;
+ sector_div(cylinders, dummy);
+
+ /*
+ * Handle extended translation size for logical drives
+ * > 1Gb
+ */
+ if ((ulong)capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ dummy = heads * sectors;
+ cylinders = capacity;
+ sector_div(cylinders, dummy);
+ }
+
+ /* return result */
+ params[0] = heads;
+ params[1] = sectors;
+ params[2] = cylinders;
+
+ return 0;
+}
+
+/**
+ * _scsih_response_code - translation of device response code
+ * @ioc: per adapter object
+ * @response_code: response code returned by the device
+ *
+ * Return nothing.
+ */
+static void
+_scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
+{
+ char *desc;
+
+ switch (response_code) {
+ case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
+ desc = "task management request completed";
+ break;
+ case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
+ desc = "invalid frame";
+ break;
+ case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
+ desc = "task management request not supported";
+ break;
+ case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
+ desc = "task management request failed";
+ break;
+ case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
+ desc = "task management request succeeded";
+ break;
+ case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
+ desc = "invalid lun";
+ break;
+ case 0xA:
+ desc = "overlapped tag attempted";
+ break;
+ case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
+ desc = "task queued, however not sent to target";
+ break;
+ default:
+ desc = "unknown";
+ break;
+ }
+ printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n",
+ ioc->name, response_code, desc);
+}
+
+/**
+ * scsih_tm_done - tm completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @VF_ID: virtual function id
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: none.
+ *
+ * The callback handler when using scsih_issue_tm.
+ *
+ * Return nothing.
+ */
+static void
+scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+
+ if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED)
+ return;
+ if (ioc->tm_cmds.smid != smid)
+ return;
+ ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ if (mpi_reply) {
+ memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
+ ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID;
+ }
+ ioc->tm_cmds.status &= ~MPT2_CMD_PENDING;
+ complete(&ioc->tm_cmds.done);
+}
+
+/**
+ * mpt2sas_scsih_set_tm_flag - set per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct scsi_device *sdev;
+ u8 skip = 0;
+
+ shost_for_each_device(sdev, ioc->shost) {
+ if (skip)
+ continue;
+ sas_device_priv_data = sdev->hostdata;
+ if (!sas_device_priv_data)
+ continue;
+ if (sas_device_priv_data->sas_target->handle == handle) {
+ sas_device_priv_data->sas_target->tm_busy = 1;
+ skip = 1;
+ ioc->ignore_loginfos = 1;
+ }
+ }
+}
+
+/**
+ * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During taskmangement request, we need to freeze the device queue.
+ */
+void
+mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct scsi_device *sdev;
+ u8 skip = 0;
+
+ shost_for_each_device(sdev, ioc->shost) {
+ if (skip)
+ continue;
+ sas_device_priv_data = sdev->hostdata;
+ if (!sas_device_priv_data)
+ continue;
+ if (sas_device_priv_data->sas_target->handle == handle) {
+ sas_device_priv_data->sas_target->tm_busy = 0;
+ skip = 1;
+ ioc->ignore_loginfos = 0;
+ }
+ }
+}
+
+/**
+ * mpt2sas_scsih_issue_tm - main routine for sending tm requests
+ * @ioc: per adapter struct
+ * @device_handle: device handle
+ * @lun: lun number
+ * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
+ * @smid_task: smid assigned to the task
+ * @timeout: timeout in seconds
+ * Context: The calling function needs to acquire the tm_cmds.mutex
+ *
+ * A generic API for sending task management requests to firmware.
+ *
+ * The ioc->tm_cmds.status flag should be MPT2_CMD_NOT_USED before calling
+ * this API.
+ *
+ * The callback index is set inside `ioc->tm_cb_idx`.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
+ u8 type, u16 smid_task, ulong timeout)
+{
+ Mpi2SCSITaskManagementRequest_t *mpi_request;
+ Mpi2SCSITaskManagementReply_t *mpi_reply;
+ u16 smid = 0;
+ u32 ioc_state;
+ unsigned long timeleft;
+ u8 VF_ID = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED ||
+ ioc->shost_recovery) {
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
+ __func__, ioc->name);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
+ if (ioc_state & MPI2_DOORBELL_USED) {
+ dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell "
+ "active!\n", ioc->name));
+ goto issue_host_reset;
+ }
+
+ if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
+ mpt2sas_base_fault_info(ioc, ioc_state &
+ MPI2_DOORBELL_DATA_MASK);
+ goto issue_host_reset;
+ }
+
+ smid = mpt2sas_base_get_smid(ioc, ioc->tm_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return;
+ }
+
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x),"
+ " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid));
+ ioc->tm_cmds.status = MPT2_CMD_PENDING;
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ ioc->tm_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+ mpi_request->DevHandle = cpu_to_le16(handle);
+ mpi_request->TaskType = type;
+ mpi_request->TaskMID = cpu_to_le16(smid_task);
+ int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
+ mpt2sas_scsih_set_tm_flag(ioc, handle);
+ mpt2sas_base_put_smid_hi_priority(ioc, smid, VF_ID);
+ timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
+ mpt2sas_scsih_clear_tm_flag(ioc, handle);
+ if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) {
+ printk(MPT2SAS_ERR_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ _debug_dump_mf(mpi_request,
+ sizeof(Mpi2SCSITaskManagementRequest_t)/4);
+ if (!(ioc->tm_cmds.status & MPT2_CMD_RESET))
+ goto issue_host_reset;
+ }
+
+ if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) {
+ mpi_reply = ioc->tm_cmds.reply;
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: "
+ "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
+ ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo),
+ le32_to_cpu(mpi_reply->TerminationCount)));
+ if (ioc->logging_level & MPT_DEBUG_TM)
+ _scsih_response_code(ioc, mpi_reply->ResponseCode);
+ }
+ return;
+ issue_host_reset:
+ mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER);
+}
+
+/**
+ * scsih_abort - eh threads main abort routine
+ * @sdev: scsi device struct
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_abort(struct scsi_cmnd *scmd)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ u16 smid;
+ u16 handle;
+ int r;
+ struct scsi_cmnd *scmd_lookup;
+
+ printk(MPT2SAS_INFO_FMT "attempting task abort! scmd(%p)\n",
+ ioc->name, scmd);
+ scsi_print_command(scmd);
+
+ sas_device_priv_data = scmd->device->hostdata;
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+ printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+ ioc->name, scmd);
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ r = SUCCESS;
+ goto out;
+ }
+
+ /* search for the command */
+ smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd);
+ if (!smid) {
+ scmd->result = DID_RESET << 16;
+ r = SUCCESS;
+ goto out;
+ }
+
+ /* for hidden raid components and volumes this is not supported */
+ if (sas_device_priv_data->sas_target->flags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT ||
+ sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
+ scmd->result = DID_RESET << 16;
+ r = FAILED;
+ goto out;
+ }
+
+ mutex_lock(&ioc->tm_cmds.mutex);
+ handle = sas_device_priv_data->sas_target->handle;
+ mpt2sas_scsih_issue_tm(ioc, handle, sas_device_priv_data->lun,
+ MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30);
+
+ /* sanity check - see whether command actually completed */
+ scmd_lookup = _scsih_scsi_lookup_get(ioc, smid);
+ if (scmd_lookup && (scmd_lookup->serial_number == scmd->serial_number))
+ r = FAILED;
+ else
+ r = SUCCESS;
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->tm_cmds.mutex);
+
+ out:
+ printk(MPT2SAS_INFO_FMT "task abort: %s scmd(%p)\n",
+ ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+ return r;
+}
+
+
+/**
+ * scsih_dev_reset - eh threads main device reset routine
+ * @sdev: scsi device struct
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ u16 handle;
+ int r;
+
+ printk(MPT2SAS_INFO_FMT "attempting target reset! scmd(%p)\n",
+ ioc->name, scmd);
+ scsi_print_command(scmd);
+
+ sas_device_priv_data = scmd->device->hostdata;
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+ printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+ ioc->name, scmd);
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ r = SUCCESS;
+ goto out;
+ }
+
+ /* for hidden raid components obtain the volume_handle */
+ handle = 0;
+ if (sas_device_priv_data->sas_target->flags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc,
+ sas_device_priv_data->sas_target->handle);
+ if (sas_device)
+ handle = sas_device->volume_handle;
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ } else
+ handle = sas_device_priv_data->sas_target->handle;
+
+ if (!handle) {
+ scmd->result = DID_RESET << 16;
+ r = FAILED;
+ goto out;
+ }
+
+ mutex_lock(&ioc->tm_cmds.mutex);
+ mpt2sas_scsih_issue_tm(ioc, handle, 0,
+ MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 30);
+
+ /*
+ * sanity check see whether all commands to this target been
+ * completed
+ */
+ if (_scsih_scsi_lookup_find_by_target(ioc, scmd->device->id,
+ scmd->device->channel))
+ r = FAILED;
+ else
+ r = SUCCESS;
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->tm_cmds.mutex);
+
+ out:
+ printk(MPT2SAS_INFO_FMT "target reset: %s scmd(%p)\n",
+ ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+ return r;
+}
+
+/**
+ * scsih_abort - eh threads main host reset routine
+ * @sdev: scsi device struct
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+scsih_host_reset(struct scsi_cmnd *scmd)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+ int r, retval;
+
+ printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n",
+ ioc->name, scmd);
+ scsi_print_command(scmd);
+
+ retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
+ FORCE_BIG_HAMMER);
+ r = (retval < 0) ? FAILED : SUCCESS;
+ printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
+ ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+
+ return r;
+}
+
+/**
+ * _scsih_fw_event_add - insert and queue up fw_event
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * This adds the firmware event object into link list, then queues it up to
+ * be processed from user context.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+ unsigned long flags;
+
+ if (ioc->firmware_event_thread == NULL)
+ return;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ list_add_tail(&fw_event->list, &ioc->fw_event_list);
+ INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work);
+ queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1);
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_fw_event_free - delete fw_event
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * This removes firmware event object from link list, frees associated memory.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
+ *fw_event)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ list_del(&fw_event->list);
+ kfree(fw_event->event_data);
+ kfree(fw_event);
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_fw_event_add - requeue an event
+ * @ioc: per adapter object
+ * @fw_event: object describing the event
+ * Context: This function will acquire ioc->fw_event_lock.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
+ *fw_event, unsigned long delay)
+{
+ unsigned long flags;
+ if (ioc->firmware_event_thread == NULL)
+ return;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay);
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_fw_event_off - turn flag off preventing event handling
+ * @ioc: per adapter object
+ *
+ * Used to prevent handling of firmware events during adapter reset
+ * driver unload.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_fw_event_off(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ ioc->fw_events_off = 1;
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+}
+
+/**
+ * _scsih_fw_event_on - turn flag on allowing firmware event handling
+ * @ioc: per adapter object
+ *
+ * Returns nothing.
+ */
+static void
+_scsih_fw_event_on(struct MPT2SAS_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ ioc->fw_events_off = 0;
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_ublock_io_device - set the device state to SDEV_RUNNING
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During device pull we need to appropiately set the sdev state.
+ */
+static void
+_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct scsi_device *sdev;
+
+ shost_for_each_device(sdev, ioc->shost) {
+ sas_device_priv_data = sdev->hostdata;
+ if (!sas_device_priv_data)
+ continue;
+ if (!sas_device_priv_data->block)
+ continue;
+ if (sas_device_priv_data->sas_target->handle == handle) {
+ dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
+ MPT2SAS_INFO_FMT "SDEV_RUNNING: "
+ "handle(0x%04x)\n", ioc->name, handle));
+ sas_device_priv_data->block = 0;
+ scsi_device_set_state(sdev, SDEV_RUNNING);
+ }
+ }
+}
+
+/**
+ * _scsih_block_io_device - set the device state to SDEV_BLOCK
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * During device pull we need to appropiately set the sdev state.
+ */
+static void
+_scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct scsi_device *sdev;
+
+ shost_for_each_device(sdev, ioc->shost) {
+ sas_device_priv_data = sdev->hostdata;
+ if (!sas_device_priv_data)
+ continue;
+ if (sas_device_priv_data->block)
+ continue;
+ if (sas_device_priv_data->sas_target->handle == handle) {
+ dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
+ MPT2SAS_INFO_FMT "SDEV_BLOCK: "
+ "handle(0x%04x)\n", ioc->name, handle));
+ sas_device_priv_data->block = 1;
+ scsi_device_set_state(sdev, SDEV_BLOCK);
+ }
+ }
+}
+
+/**
+ * _scsih_block_io_to_children_attached_to_ex
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * attached to this expander. This function called when expander is
+ * pulled.
+ */
+static void
+_scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_node *sas_expander)
+{
+ struct _sas_port *mpt2sas_port;
+ struct _sas_device *sas_device;
+ struct _sas_node *expander_sibling;
+ unsigned long flags;
+
+ if (!sas_expander)
+ return;
+
+ list_for_each_entry(mpt2sas_port,
+ &sas_expander->sas_port_list, port_list) {
+ if (mpt2sas_port->remote_identify.device_type ==
+ SAS_END_DEVICE) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device =
+ mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ mpt2sas_port->remote_identify.sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device)
+ continue;
+ _scsih_block_io_device(ioc, sas_device->handle);
+ }
+ }
+
+ list_for_each_entry(mpt2sas_port,
+ &sas_expander->sas_port_list, port_list) {
+
+ if (mpt2sas_port->remote_identify.device_type ==
+ MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+ mpt2sas_port->remote_identify.device_type ==
+ MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ expander_sibling =
+ mpt2sas_scsih_expander_find_by_sas_address(
+ ioc, mpt2sas_port->remote_identify.sas_address);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ _scsih_block_io_to_children_attached_to_ex(ioc,
+ expander_sibling);
+ }
+ }
+}
+
+/**
+ * _scsih_block_io_to_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull.
+ */
+static void
+_scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+ u8 phy_number;
+
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ phy_number = event_data->StartPhyNum + i;
+ reason_code = event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_RC_MASK;
+ if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
+ _scsih_block_io_device(ioc, handle);
+ }
+}
+
+/**
+ * _scsih_check_topo_delete_events - sanity check on topo events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This routine added to better handle cable breaker.
+ *
+ * This handles the case where driver recieves multiple expander
+ * add and delete events in a single shot. When there is a delete event
+ * the routine will void any pending add events waiting in the event queue.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+ struct fw_event_work *fw_event;
+ Mpi2EventDataSasTopologyChangeList_t *local_event_data;
+ u16 expander_handle;
+ struct _sas_node *sas_expander;
+ unsigned long flags;
+
+ expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+ if (expander_handle < ioc->sas_hba.num_phys) {
+ _scsih_block_io_to_children_attached_directly(ioc, event_data);
+ return;
+ }
+
+ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING
+ || event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) {
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
+ expander_handle);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
+ } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
+ _scsih_block_io_to_children_attached_directly(ioc, event_data);
+
+ if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+ return;
+
+ /* mark ignore flag for pending events */
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+ if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
+ fw_event->ignore)
+ continue;
+ local_event_data = fw_event->event_data;
+ if (local_event_data->ExpStatus ==
+ MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+ local_event_data->ExpStatus ==
+ MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+ if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
+ expander_handle) {
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ "setting ignoring flag\n", ioc->name));
+ fw_event->ignore = 1;
+ }
+ }
+ }
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
+ * _scsih_queue_rescan - queue a topology rescan from user context
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct fw_event_work *fw_event;
+
+ if (ioc->wait_for_port_enable_to_complete)
+ return;
+ fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ if (!fw_event)
+ return;
+ fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
+ fw_event->ioc = ioc;
+ _scsih_fw_event_add(ioc, fw_event);
+}
+
+/**
+ * _scsih_flush_running_cmds - completing outstanding commands.
+ * @ioc: per adapter object
+ *
+ * The flushing out of all pending scmd commands following host reset,
+ * where all IO is dropped to the floor.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct scsi_cmnd *scmd;
+ u16 smid;
+ u16 count = 0;
+
+ for (smid = 1; smid <= ioc->request_depth; smid++) {
+ scmd = _scsih_scsi_lookup_getclear(ioc, smid);
+ if (!scmd)
+ continue;
+ count++;
+ mpt2sas_base_free_smid(ioc, smid);
+ scsi_dma_unmap(scmd);
+ scmd->result = DID_RESET << 16;
+ scmd->scsi_done(scmd);
+ }
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n",
+ ioc->name, count));
+}
+
+/**
+ * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
+ * MPT2_IOC_DONE_RESET
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
+{
+ switch (reset_phase) {
+ case MPT2_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+ _scsih_fw_event_off(ioc);
+ break;
+ case MPT2_IOC_AFTER_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
+ if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
+ ioc->tm_cmds.status |= MPT2_CMD_RESET;
+ mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
+ complete(&ioc->tm_cmds.done);
+ }
+ _scsih_fw_event_on(ioc);
+ _scsih_flush_running_cmds(ioc);
+ break;
+ case MPT2_IOC_DONE_RESET:
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+ _scsih_queue_rescan(ioc);
+ break;
+ }
+}
+
+/**
+ * scsih_qcmd - main scsi request entry point
+ * @scmd: pointer to scsi command object
+ * @done: function pointer to be invoked on completion
+ *
+ * The callback index is set inside `ioc->scsi_io_cb_idx`.
+ *
+ * Returns 0 on success. If there's a failure, return either:
+ * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
+ * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
+ */
+static int
+scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ Mpi2SCSIIORequest_t *mpi_request;
+ u32 mpi_control;
+ u16 smid;
+ unsigned long flags;
+
+ scmd->scsi_done = done;
+ sas_device_priv_data = scmd->device->hostdata;
+ if (!sas_device_priv_data) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+
+ sas_target_priv_data = sas_device_priv_data->sas_target;
+ if (!sas_target_priv_data || sas_target_priv_data->handle ==
+ MPT2SAS_INVALID_DEVICE_HANDLE || sas_target_priv_data->deleted) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+
+ /* see if we are busy with task managment stuff */
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (sas_target_priv_data->tm_busy ||
+ ioc->shost_recovery || ioc->ioc_link_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ if (scmd->sc_data_direction == DMA_FROM_DEVICE)
+ mpi_control = MPI2_SCSIIO_CONTROL_READ;
+ else if (scmd->sc_data_direction == DMA_TO_DEVICE)
+ mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
+ else
+ mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
+
+ /* set tags */
+ if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) {
+ if (scmd->device->tagged_supported) {
+ if (scmd->device->ordered_tags)
+ mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
+ else
+ mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+ } else
+/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */
+/* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED;
+ */
+ mpi_control |= (0x500);
+
+ } else
+ mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+
+ if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON))
+ mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
+
+ smid = mpt2sas_base_get_smid(ioc, ioc->scsi_io_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ goto out;
+ }
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+ mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+ if (sas_device_priv_data->sas_target->flags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT)
+ mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
+ else
+ mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+ mpi_request->DevHandle =
+ cpu_to_le16(sas_device_priv_data->sas_target->handle);
+ mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
+ mpi_request->Control = cpu_to_le32(mpi_control);
+ mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
+ mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
+ mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+ mpi_request->SenseBufferLowAddress =
+ (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid);
+ mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
+ mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
+ MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
+
+ int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
+ mpi_request->LUN);
+ memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
+
+ if (!mpi_request->DataLength) {
+ mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL);
+ } else {
+ if (_scsih_build_scatter_gather(ioc, scmd, smid)) {
+ mpt2sas_base_free_smid(ioc, smid);
+ goto out;
+ }
+ }
+
+ _scsih_scsi_lookup_set(ioc, smid, scmd);
+ mpt2sas_base_put_smid_scsi_io(ioc, smid, 0,
+ sas_device_priv_data->sas_target->handle);
+ return 0;
+
+ out:
+ return SCSI_MLQUEUE_HOST_BUSY;
+}
+
+/**
+ * _scsih_normalize_sense - normalize descriptor and fixed format sense data
+ * @sense_buffer: sense data returned by target
+ * @data: normalized skey/asc/ascq
+ *
+ * Return nothing.
+ */
+static void
+_scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
+{
+ if ((sense_buffer[0] & 0x7F) >= 0x72) {
+ /* descriptor format */
+ data->skey = sense_buffer[1] & 0x0F;
+ data->asc = sense_buffer[2];
+ data->ascq = sense_buffer[3];
+ } else {
+ /* fixed format */
+ data->skey = sense_buffer[2] & 0x0F;
+ data->asc = sense_buffer[12];
+ data->ascq = sense_buffer[13];
+ }
+}
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+/**
+ * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @mpi_reply: reply mf payload returned from firmware
+ *
+ * scsi_status - SCSI Status code returned from target device
+ * scsi_state - state info associated with SCSI_IO determined by ioc
+ * ioc_status - ioc supplied status info
+ *
+ * Return nothing.
+ */
+static void
+_scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+ Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
+{
+ u32 response_info;
+ u8 *response_bytes;
+ u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ u8 scsi_state = mpi_reply->SCSIState;
+ u8 scsi_status = mpi_reply->SCSIStatus;
+ char *desc_ioc_state = NULL;
+ char *desc_scsi_status = NULL;
+ char *desc_scsi_state = ioc->tmp_string;
+
+ switch (ioc_status) {
+ case MPI2_IOCSTATUS_SUCCESS:
+ desc_ioc_state = "success";
+ break;
+ case MPI2_IOCSTATUS_INVALID_FUNCTION:
+ desc_ioc_state = "invalid function";
+ break;
+ case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+ desc_ioc_state = "scsi recovered error";
+ break;
+ case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
+ desc_ioc_state = "scsi invalid dev handle";
+ break;
+ case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+ desc_ioc_state = "scsi device not there";
+ break;
+ case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+ desc_ioc_state = "scsi data overrun";
+ break;
+ case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+ desc_ioc_state = "scsi data underrun";
+ break;
+ case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+ desc_ioc_state = "scsi io data error";
+ break;
+ case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+ desc_ioc_state = "scsi protocol error";
+ break;
+ case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+ desc_ioc_state = "scsi task terminated";
+ break;
+ case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+ desc_ioc_state = "scsi residual mismatch";
+ break;
+ case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+ desc_ioc_state = "scsi task mgmt failed";
+ break;
+ case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+ desc_ioc_state = "scsi ioc terminated";
+ break;
+ case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+ desc_ioc_state = "scsi ext terminated";
+ break;
+ default:
+ desc_ioc_state = "unknown";
+ break;
+ }
+
+ switch (scsi_status) {
+ case MPI2_SCSI_STATUS_GOOD:
+ desc_scsi_status = "good";
+ break;
+ case MPI2_SCSI_STATUS_CHECK_CONDITION:
+ desc_scsi_status = "check condition";
+ break;
+ case MPI2_SCSI_STATUS_CONDITION_MET:
+ desc_scsi_status = "condition met";
+ break;
+ case MPI2_SCSI_STATUS_BUSY:
+ desc_scsi_status = "busy";
+ break;
+ case MPI2_SCSI_STATUS_INTERMEDIATE:
+ desc_scsi_status = "intermediate";
+ break;
+ case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
+ desc_scsi_status = "intermediate condmet";
+ break;
+ case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
+ desc_scsi_status = "reservation conflict";
+ break;
+ case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
+ desc_scsi_status = "command terminated";
+ break;
+ case MPI2_SCSI_STATUS_TASK_SET_FULL:
+ desc_scsi_status = "task set full";
+ break;
+ case MPI2_SCSI_STATUS_ACA_ACTIVE:
+ desc_scsi_status = "aca active";
+ break;
+ case MPI2_SCSI_STATUS_TASK_ABORTED:
+ desc_scsi_status = "task aborted";
+ break;
+ default:
+ desc_scsi_status = "unknown";
+ break;
+ }
+
+ desc_scsi_state[0] = '\0';
+ if (!scsi_state)
+ desc_scsi_state = " ";
+ if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+ strcat(desc_scsi_state, "response info ");
+ if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+ strcat(desc_scsi_state, "state terminated ");
+ if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
+ strcat(desc_scsi_state, "no status ");
+ if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
+ strcat(desc_scsi_state, "autosense failed ");
+ if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
+ strcat(desc_scsi_state, "autosense valid ");
+
+ scsi_print_command(scmd);
+ printk(MPT2SAS_WARN_FMT "\tdev handle(0x%04x), "
+ "ioc_status(%s)(0x%04x), smid(%d)\n", ioc->name,
+ le16_to_cpu(mpi_reply->DevHandle), desc_ioc_state,
+ ioc_status, smid);
+ printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), "
+ "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow,
+ scsi_get_resid(scmd));
+ printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), "
+ "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag),
+ le32_to_cpu(mpi_reply->TransferCount), scmd->result);
+ printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), "
+ "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status,
+ scsi_status, desc_scsi_state, scsi_state);
+
+ if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+ struct sense_info data;
+ _scsih_normalize_sense(scmd->sense_buffer, &data);
+ printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: "
+ "[0x%02x,0x%02x,0x%02x]\n", ioc->name, data.skey,
+ data.asc, data.ascq);
+ }
+
+ if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
+ response_info = le32_to_cpu(mpi_reply->ResponseInfo);
+ response_bytes = (u8 *)&response_info;
+ _scsih_response_code(ioc, response_bytes[3]);
+ }
+}
+#endif
+
+/**
+ * _scsih_smart_predicted_fault - illuminate Fault LED
+ * @ioc: per adapter object
+ * @handle: device handle
+ *
+ * Return nothing.
+ */
+static void
+_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ Mpi2SepReply_t mpi_reply;
+ Mpi2SepRequest_t mpi_request;
+ struct scsi_target *starget;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ Mpi2EventNotificationReply_t *event_reply;
+ Mpi2EventDataSasDeviceStatusChange_t *event_data;
+ struct _sas_device *sas_device;
+ ssize_t sz;
+ unsigned long flags;
+
+ /* only handle non-raid devices */
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ return;
+ }
+ starget = sas_device->starget;
+ sas_target_priv_data = starget->hostdata;
+
+ if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
+ ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ return;
+ }
+ starget_printk(KERN_WARNING, starget, "predicted fault\n");
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) {
+ memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
+ mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
+ mpi_request.SlotStatus =
+ MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT;
+ mpi_request.DevHandle = cpu_to_le16(handle);
+ mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
+ if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
+ &mpi_request)) != 0) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "enclosure_processor: ioc_status (0x%04x), "
+ "loginfo(0x%08x)\n", ioc->name,
+ le16_to_cpu(mpi_reply.IOCStatus),
+ le32_to_cpu(mpi_reply.IOCLogInfo)));
+ return;
+ }
+ }
+
+ /* insert into event log */
+ sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
+ sizeof(Mpi2EventDataSasDeviceStatusChange_t);
+ event_reply = kzalloc(sz, GFP_KERNEL);
+ if (!event_reply) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
+ event_reply->Event =
+ cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
+ event_reply->MsgLength = sz/4;
+ event_reply->EventDataLength =
+ cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
+ event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
+ event_reply->EventData;
+ event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
+ event_data->ASC = 0x5D;
+ event_data->DevHandle = cpu_to_le16(handle);
+ event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
+ mpt2sas_ctl_add_to_event_log(ioc, event_reply);
+ kfree(event_reply);
+}
+
+/**
+ * scsih_io_done - scsi request callback
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @VF_ID: virtual function id
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when using scsih_qcmd.
+ *
+ * Return nothing.
+ */
+static void
+scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+{
+ Mpi2SCSIIORequest_t *mpi_request;
+ Mpi2SCSIIOReply_t *mpi_reply;
+ struct scsi_cmnd *scmd;
+ u16 ioc_status;
+ u32 xfer_cnt;
+ u8 scsi_state;
+ u8 scsi_status;
+ u32 log_info;
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ u32 response_code;
+
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ scmd = _scsih_scsi_lookup_getclear(ioc, smid);
+ if (scmd == NULL)
+ return;
+
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+
+ if (mpi_reply == NULL) {
+ scmd->result = DID_OK << 16;
+ goto out;
+ }
+
+ sas_device_priv_data = scmd->device->hostdata;
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
+ sas_device_priv_data->sas_target->deleted) {
+ scmd->result = DID_NO_CONNECT << 16;
+ goto out;
+ }
+
+ /* turning off TLR */
+ if (!sas_device_priv_data->tlr_snoop_check) {
+ sas_device_priv_data->tlr_snoop_check++;
+ if (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) {
+ response_code = (le32_to_cpu(mpi_reply->ResponseInfo)
+ >> 24);
+ if (response_code ==
+ MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
+ sas_device_priv_data->flags &=
+ ~MPT_DEVICE_TLR_ON;
+ }
+ }
+
+ xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
+ scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
+ if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
+ log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+ else
+ log_info = 0;
+ ioc_status &= MPI2_IOCSTATUS_MASK;
+ scsi_state = mpi_reply->SCSIState;
+ scsi_status = mpi_reply->SCSIStatus;
+
+ if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
+ (scsi_status == MPI2_SCSI_STATUS_BUSY ||
+ scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
+ scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
+ ioc_status = MPI2_IOCSTATUS_SUCCESS;
+ }
+
+ if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
+ struct sense_info data;
+ const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
+ smid);
+ memcpy(scmd->sense_buffer, sense_data,
+ le32_to_cpu(mpi_reply->SenseCount));
+ _scsih_normalize_sense(scmd->sense_buffer, &data);
+ /* failure prediction threshold exceeded */
+ if (data.asc == 0x5D)
+ _scsih_smart_predicted_fault(ioc,
+ le16_to_cpu(mpi_reply->DevHandle));
+ }
+
+ switch (ioc_status) {
+ case MPI2_IOCSTATUS_BUSY:
+ case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
+ scmd->result = SAM_STAT_BUSY;
+ break;
+
+ case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+ scmd->result = DID_NO_CONNECT << 16;
+ break;
+
+ case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
+ if (sas_device_priv_data->block) {
+ scmd->result = (DID_BUS_BUSY << 16);
+ break;
+ }
+
+ case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
+ case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
+ scmd->result = DID_RESET << 16;
+ break;
+
+ case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+ if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
+ scmd->result = DID_SOFT_ERROR << 16;
+ else
+ scmd->result = (DID_OK << 16) | scsi_status;
+ break;
+
+ case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
+ scmd->result = (DID_OK << 16) | scsi_status;
+
+ if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
+ break;
+
+ if (xfer_cnt < scmd->underflow) {
+ if (scsi_status == SAM_STAT_BUSY)
+ scmd->result = SAM_STAT_BUSY;
+ else
+ scmd->result = DID_SOFT_ERROR << 16;
+ } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+ MPI2_SCSI_STATE_NO_SCSI_STATUS))
+ scmd->result = DID_SOFT_ERROR << 16;
+ else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+ scmd->result = DID_RESET << 16;
+ else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
+ mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
+ mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
+ scmd->result = (DRIVER_SENSE << 24) |
+ SAM_STAT_CHECK_CONDITION;
+ scmd->sense_buffer[0] = 0x70;
+ scmd->sense_buffer[2] = ILLEGAL_REQUEST;
+ scmd->sense_buffer[12] = 0x20;
+ scmd->sense_buffer[13] = 0;
+ }
+ break;
+
+ case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
+ scsi_set_resid(scmd, 0);
+ case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
+ case MPI2_IOCSTATUS_SUCCESS:
+ scmd->result = (DID_OK << 16) | scsi_status;
+ if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+ MPI2_SCSI_STATE_NO_SCSI_STATUS))
+ scmd->result = DID_SOFT_ERROR << 16;
+ else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
+ scmd->result = DID_RESET << 16;
+ break;
+
+ case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+ case MPI2_IOCSTATUS_INVALID_FUNCTION:
+ case MPI2_IOCSTATUS_INVALID_SGL:
+ case MPI2_IOCSTATUS_INTERNAL_ERROR:
+ case MPI2_IOCSTATUS_INVALID_FIELD:
+ case MPI2_IOCSTATUS_INVALID_STATE:
+ case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
+ case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+ default:
+ scmd->result = DID_SOFT_ERROR << 16;
+ break;
+
+ }
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
+ _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
+#endif
+
+ out:
+ scsi_dma_unmap(scmd);
+ scmd->scsi_done(scmd);
+}
+
+/**
+ * _scsih_link_change - process phy link changes
+ * @ioc: per adapter object
+ * @handle: phy handle
+ * @attached_handle: valid for devices attached to link
+ * @phy_number: phy number
+ * @link_rate: new link rate
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_link_change(struct MPT2SAS_ADAPTER *ioc, u16 handle, u16 attached_handle,
+ u8 phy_number, u8 link_rate)
+{
+ mpt2sas_transport_update_phy_link_change(ioc, handle, attached_handle,
+ phy_number, link_rate);
+}
+
+/**
+ * _scsih_sas_host_refresh - refreshing sas host object contents
+ * @ioc: per adapter object
+ * @update: update link information
+ * Context: user
+ *
+ * During port enable, fw will send topology events for every device. Its
+ * possible that the handles may change from the previous setting, so this
+ * code keeping handles updating if changed.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update)
+{
+ u16 sz;
+ u16 ioc_status;
+ int i;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "updating handles for sas_host(0x%016llx)\n",
+ ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
+
+ sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
+ * sizeof(Mpi2SasIOUnit0PhyData_t));
+ sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg0) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+ if (!(mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+ sas_iounit_pg0, sz))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ goto out;
+ for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+ ioc->sas_hba.phy[i].handle =
+ le16_to_cpu(sas_iounit_pg0->PhyData[i].
+ ControllerDevHandle);
+ if (update)
+ _scsih_link_change(ioc,
+ ioc->sas_hba.phy[i].handle,
+ le16_to_cpu(sas_iounit_pg0->PhyData[i].
+ AttachedDevHandle), i,
+ sas_iounit_pg0->PhyData[i].
+ NegotiatedLinkRate >> 4);
+ }
+ }
+
+ out:
+ kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_sas_host_add - create sas host object
+ * @ioc: per adapter object
+ *
+ * Creating host side data object, stored in ioc->sas_hba
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc)
+{
+ int i;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+ Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+ Mpi2SasPhyPage0_t phy_pg0;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2SasEnclosurePage0_t enclosure_pg0;
+ u16 ioc_status;
+ u16 sz;
+ u16 device_missing_delay;
+
+ mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys);
+ if (!ioc->sas_hba.num_phys) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ /* sas_iounit page 0 */
+ sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
+ sizeof(Mpi2SasIOUnit0PhyData_t));
+ sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg0) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+ if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+ sas_iounit_pg0, sz))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+
+ /* sas_iounit page 1 */
+ sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
+ sizeof(Mpi2SasIOUnit1PhyData_t));
+ sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+ if (!sas_iounit_pg1) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+ sas_iounit_pg1, sz))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+
+ ioc->io_missing_delay =
+ le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay);
+ device_missing_delay =
+ le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay);
+ if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+ ioc->device_missing_delay = (device_missing_delay &
+ MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+ else
+ ioc->device_missing_delay = device_missing_delay &
+ MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+
+ ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
+ ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys,
+ sizeof(struct _sas_phy), GFP_KERNEL);
+ if (!ioc->sas_hba.phy) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+ if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
+ i))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ ioc->sas_hba.phy[i].handle =
+ le16_to_cpu(sas_iounit_pg0->PhyData[i].ControllerDevHandle);
+ ioc->sas_hba.phy[i].phy_id = i;
+ mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
+ phy_pg0, ioc->sas_hba.parent_dev);
+ }
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.phy[0].handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out;
+ }
+ ioc->sas_hba.handle = le16_to_cpu(sas_device_pg0.DevHandle);
+ ioc->sas_hba.enclosure_handle =
+ le16_to_cpu(sas_device_pg0.EnclosureHandle);
+ ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), "
+ "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle,
+ (unsigned long long) ioc->sas_hba.sas_address,
+ ioc->sas_hba.num_phys) ;
+
+ if (ioc->sas_hba.enclosure_handle) {
+ if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+ &enclosure_pg0,
+ MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ ioc->sas_hba.enclosure_handle))) {
+ ioc->sas_hba.enclosure_logical_id =
+ le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+ }
+ }
+
+ out:
+ kfree(sas_iounit_pg1);
+ kfree(sas_iounit_pg0);
+}
+
+/**
+ * _scsih_expander_add - creating expander object
+ * @ioc: per adapter object
+ * @handle: expander handle
+ *
+ * Creating expander object, stored in ioc->sas_expander_list.
+ *
+ * Return 0 for success, else error.
+ */
+static int
+_scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _sas_node *sas_expander;
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2ExpanderPage0_t expander_pg0;
+ Mpi2ExpanderPage1_t expander_pg1;
+ Mpi2SasEnclosurePage0_t enclosure_pg0;
+ u32 ioc_status;
+ u16 parent_handle;
+ __le64 sas_address;
+ int i;
+ unsigned long flags;
+ struct _sas_port *mpt2sas_port;
+ int rc = 0;
+
+ if (!handle)
+ return -1;
+
+ if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+ MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+
+ /* handle out of order topology events */
+ parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
+ if (parent_handle >= ioc->sas_hba.num_phys) {
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
+ parent_handle);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ if (!sas_expander) {
+ rc = _scsih_expander_add(ioc, parent_handle);
+ if (rc != 0)
+ return rc;
+ }
+ }
+
+ sas_address = le64_to_cpu(expander_pg0.SASAddress);
+
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ sas_address);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+
+ if (sas_expander)
+ return 0;
+
+ sas_expander = kzalloc(sizeof(struct _sas_node),
+ GFP_KERNEL);
+ if (!sas_expander) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+
+ sas_expander->handle = handle;
+ sas_expander->num_phys = expander_pg0.NumPhys;
+ sas_expander->parent_handle = parent_handle;
+ sas_expander->enclosure_handle =
+ le16_to_cpu(expander_pg0.EnclosureHandle);
+ sas_expander->sas_address = sas_address;
+
+ printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x),"
+ " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
+ handle, sas_expander->parent_handle, (unsigned long long)
+ sas_expander->sas_address, sas_expander->num_phys);
+
+ if (!sas_expander->num_phys)
+ goto out_fail;
+ sas_expander->phy = kcalloc(sas_expander->num_phys,
+ sizeof(struct _sas_phy), GFP_KERNEL);
+ if (!sas_expander->phy) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -1;
+ goto out_fail;
+ }
+
+ INIT_LIST_HEAD(&sas_expander->sas_port_list);
+ mpt2sas_port = mpt2sas_transport_port_add(ioc, handle,
+ sas_expander->parent_handle);
+ if (!mpt2sas_port) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ rc = -1;
+ goto out_fail;
+ }
+ sas_expander->parent_dev = &mpt2sas_port->rphy->dev;
+
+ for (i = 0 ; i < sas_expander->num_phys ; i++) {
+ if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
+ &expander_pg1, i, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ continue;
+ }
+ sas_expander->phy[i].handle = handle;
+ sas_expander->phy[i].phy_id = i;
+ mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i],
+ expander_pg1, sas_expander->parent_dev);
+ }
+
+ if (sas_expander->enclosure_handle) {
+ if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
+ &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ sas_expander->enclosure_handle))) {
+ sas_expander->enclosure_logical_id =
+ le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+ }
+ }
+
+ _scsih_expander_node_add(ioc, sas_expander);
+ return 0;
+
+ out_fail:
+
+ if (sas_expander)
+ kfree(sas_expander->phy);
+ kfree(sas_expander);
+ return rc;
+}
+
+/**
+ * _scsih_expander_remove - removing expander object
+ * @ioc: per adapter object
+ * @handle: expander handle
+ *
+ * Return nothing.
+ */
+static void
+_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _sas_node *sas_expander;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ _scsih_expander_node_remove(ioc, sas_expander);
+}
+
+/**
+ * _scsih_add_device - creating sas device object
+ * @ioc: per adapter object
+ * @handle: sas device handle
+ * @phy_num: phy number end device attached to
+ * @is_pd: is this hidden raid component
+ *
+ * Creating end device object, stored in ioc->sas_device_list.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
+{
+ Mpi2ConfigReply_t mpi_reply;
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2SasEnclosurePage0_t enclosure_pg0;
+ struct _sas_device *sas_device;
+ u32 ioc_status;
+ __le64 sas_address;
+ u32 device_info;
+ unsigned long flags;
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+
+ /* check if device is present */
+ if (!(le16_to_cpu(sas_device_pg0.Flags) &
+ MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n",
+ ioc->name, le16_to_cpu(sas_device_pg0.Flags));
+ return -1;
+ }
+
+ /* check if there were any issus with discovery */
+ if (sas_device_pg0.AccessStatus ==
+ MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ printk(MPT2SAS_ERR_FMT "AccessStatus = 0x%02x\n",
+ ioc->name, sas_device_pg0.AccessStatus);
+ return -1;
+ }
+
+ /* check if this is end device */
+ device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+ if (!(_scsih_is_end_device(device_info))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+
+ sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (sas_device) {
+ _scsih_ublock_io_device(ioc, handle);
+ return 0;
+ }
+
+ sas_device = kzalloc(sizeof(struct _sas_device),
+ GFP_KERNEL);
+ if (!sas_device) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+
+ sas_device->handle = handle;
+ sas_device->parent_handle =
+ le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ sas_device->enclosure_handle =
+ le16_to_cpu(sas_device_pg0.EnclosureHandle);
+ sas_device->slot =
+ le16_to_cpu(sas_device_pg0.Slot);
+ sas_device->device_info = device_info;
+ sas_device->sas_address = sas_address;
+ sas_device->hidden_raid_component = is_pd;
+
+ /* get enclosure_logical_id */
+ if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0,
+ MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+ sas_device->enclosure_handle))) {
+ sas_device->enclosure_logical_id =
+ le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
+ }
+
+ /* get device name */
+ sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
+
+ if (ioc->wait_for_port_enable_to_complete)
+ _scsih_sas_device_init_add(ioc, sas_device);
+ else
+ _scsih_sas_device_add(ioc, sas_device);
+
+ return 0;
+}
+
+/**
+ * _scsih_remove_device - removing sas device object
+ * @ioc: per adapter object
+ * @handle: sas device handle
+ *
+ * Return nothing.
+ */
+static void
+_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ Mpi2SasIoUnitControlReply_t mpi_reply;
+ Mpi2SasIoUnitControlRequest_t mpi_request;
+ u16 device_handle;
+
+ /* lookup sas_device */
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ return;
+ }
+
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle"
+ "(0x%04x)\n", ioc->name, __func__, handle));
+
+ if (sas_device->starget && sas_device->starget->hostdata) {
+ sas_target_priv_data = sas_device->starget->hostdata;
+ sas_target_priv_data->deleted = 1;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (ioc->remove_host)
+ goto out;
+
+ /* Target Reset to flush out all the outstanding IO */
+ device_handle = (sas_device->hidden_raid_component) ?
+ sas_device->volume_handle : handle;
+ if (device_handle) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset: "
+ "handle(0x%04x)\n", ioc->name, device_handle));
+ mutex_lock(&ioc->tm_cmds.mutex);
+ mpt2sas_scsih_issue_tm(ioc, device_handle, 0,
+ MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->tm_cmds.mutex);
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset "
+ "done: handle(0x%04x)\n", ioc->name, device_handle));
+ }
+
+ /* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: handle"
+ "(0x%04x)\n", ioc->name, handle));
+ memset(&mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+ mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+ mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+ mpi_request.DevHandle = handle;
+ mpi_request.VF_ID = 0;
+ if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply,
+ &mpi_request)) != 0) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ }
+
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: ioc_status"
+ "(0x%04x), loginfo(0x%08x)\n", ioc->name,
+ le16_to_cpu(mpi_reply.IOCStatus),
+ le32_to_cpu(mpi_reply.IOCLogInfo)));
+
+ out:
+ mpt2sas_transport_port_remove(ioc, sas_device->sas_address,
+ sas_device->parent_handle);
+
+ printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
+ "(0x%016llx)\n", ioc->name, sas_device->handle,
+ (unsigned long long) sas_device->sas_address);
+ _scsih_sas_device_remove(ioc, sas_device);
+
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: handle"
+ "(0x%04x)\n", ioc->name, __func__, handle));
+}
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+/**
+ * _scsih_sas_topology_change_event_debug - debug for topology event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataSasTopologyChangeList_t *event_data)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+ u8 phy_number;
+ char *status_str = NULL;
+ char link_rate[25];
+
+ switch (event_data->ExpStatus) {
+ case MPI2_EVENT_SAS_TOPO_ES_ADDED:
+ status_str = "add";
+ break;
+ case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
+ status_str = "remove";
+ break;
+ case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
+ status_str = "responding";
+ break;
+ case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
+ status_str = "remove delay";
+ break;
+ default:
+ status_str = "unknown status";
+ break;
+ }
+ printk(MPT2SAS_DEBUG_FMT "sas topology change: (%s)\n",
+ ioc->name, status_str);
+ printk(KERN_DEBUG "\thandle(0x%04x), enclosure_handle(0x%04x) "
+ "start_phy(%02d), count(%d)\n",
+ le16_to_cpu(event_data->ExpanderDevHandle),
+ le16_to_cpu(event_data->EnclosureHandle),
+ event_data->StartPhyNum, event_data->NumEntries);
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ phy_number = event_data->StartPhyNum + i;
+ reason_code = event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_RC_MASK;
+ switch (reason_code) {
+ case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+ snprintf(link_rate, 25, ": add, link(0x%02x)",
+ (event_data->PHY[i].LinkRate >> 4));
+ status_str = link_rate;
+ break;
+ case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+ status_str = ": remove";
+ break;
+ case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
+ status_str = ": remove_delay";
+ break;
+ case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+ snprintf(link_rate, 25, ": link(0x%02x)",
+ (event_data->PHY[i].LinkRate >> 4));
+ status_str = link_rate;
+ break;
+ case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
+ status_str = ": responding";
+ break;
+ default:
+ status_str = ": unknown";
+ break;
+ }
+ printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x)%s\n",
+ phy_number, handle, status_str);
+ }
+}
+#endif
+
+/**
+ * _scsih_sas_topology_change_event - handle topology changes
+ * @ioc: per adapter object
+ * @VF_ID:
+ * @event_data: event data payload
+ * fw_event:
+ * Context: user.
+ *
+ */
+static void
+_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataSasTopologyChangeList_t *event_data,
+ struct fw_event_work *fw_event)
+{
+ int i;
+ u16 parent_handle, handle;
+ u16 reason_code;
+ u8 phy_number;
+ struct _sas_node *sas_expander;
+ unsigned long flags;
+ u8 link_rate_;
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_sas_topology_change_event_debug(ioc, event_data);
+#endif
+
+ if (!ioc->sas_hba.num_phys)
+ _scsih_sas_host_add(ioc);
+ else
+ _scsih_sas_host_refresh(ioc, 0);
+
+ if (fw_event->ignore) {
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring expander "
+ "event\n", ioc->name));
+ return;
+ }
+
+ parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
+
+ /* handle expander add */
+ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
+ if (_scsih_expander_add(ioc, parent_handle) != 0)
+ return;
+
+ /* handle siblings events */
+ for (i = 0; i < event_data->NumEntries; i++) {
+ if (fw_event->ignore) {
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring "
+ "expander event\n", ioc->name));
+ return;
+ }
+ if (event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
+ continue;
+ handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ phy_number = event_data->StartPhyNum + i;
+ reason_code = event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_RC_MASK;
+ link_rate_ = event_data->PHY[i].LinkRate >> 4;
+ switch (reason_code) {
+ case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+ case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
+ if (!parent_handle) {
+ if (phy_number < ioc->sas_hba.num_phys)
+ _scsih_link_change(ioc,
+ ioc->sas_hba.phy[phy_number].handle,
+ handle, phy_number, link_rate_);
+ } else {
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_expander =
+ mpt2sas_scsih_expander_find_by_handle(ioc,
+ parent_handle);
+ spin_unlock_irqrestore(&ioc->sas_node_lock,
+ flags);
+ if (sas_expander) {
+ if (phy_number < sas_expander->num_phys)
+ _scsih_link_change(ioc,
+ sas_expander->
+ phy[phy_number].handle,
+ handle, phy_number,
+ link_rate_);
+ }
+ }
+ if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) {
+ if (link_rate_ >= MPI2_SAS_NEG_LINK_RATE_1_5)
+ _scsih_ublock_io_device(ioc, handle);
+ }
+ if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) {
+ if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5)
+ break;
+ _scsih_add_device(ioc, handle, phy_number, 0);
+ }
+ break;
+ case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
+ _scsih_remove_device(ioc, handle);
+ break;
+ }
+ }
+
+ /* handle expander removal */
+ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+ _scsih_expander_remove(ioc, parent_handle);
+
+}
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+/**
+ * _scsih_sas_device_status_change_event_debug - debug for device event
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataSasDeviceStatusChange_t *event_data)
+{
+ char *reason_str = NULL;
+
+ switch (event_data->ReasonCode) {
+ case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
+ reason_str = "smart data";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+ reason_str = "unsupported device discovered";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
+ reason_str = "internal device reset";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
+ reason_str = "internal task abort";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+ reason_str = "internal task abort set";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+ reason_str = "internal clear task set";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+ reason_str = "internal query task";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
+ reason_str = "sata init failure";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+ reason_str = "internal device reset complete";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+ reason_str = "internal task abort complete";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
+ reason_str = "internal async notification";
+ break;
+ default:
+ reason_str = "unknown reason";
+ break;
+ }
+ printk(MPT2SAS_DEBUG_FMT "device status change: (%s)\n"
+ "\thandle(0x%04x), sas address(0x%016llx)", ioc->name,
+ reason_str, le16_to_cpu(event_data->DevHandle),
+ (unsigned long long)le64_to_cpu(event_data->SASAddress));
+ if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
+ printk(MPT2SAS_DEBUG_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
+ event_data->ASC, event_data->ASCQ);
+ printk(KERN_INFO "\n");
+}
+#endif
+
+/**
+ * _scsih_sas_device_status_change_event - handle device status change
+ * @ioc: per adapter object
+ * @VF_ID:
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataSasDeviceStatusChange_t *event_data)
+{
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_sas_device_status_change_event_debug(ioc, event_data);
+#endif
+}
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+/**
+ * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataSasEnclDevStatusChange_t *event_data)
+{
+ char *reason_str = NULL;
+
+ switch (event_data->ReasonCode) {
+ case MPI2_EVENT_SAS_ENCL_RC_ADDED:
+ reason_str = "enclosure add";
+ break;
+ case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
+ reason_str = "enclosure remove";
+ break;
+ default:
+ reason_str = "unknown reason";
+ break;
+ }
+
+ printk(MPT2SAS_DEBUG_FMT "enclosure status change: (%s)\n"
+ "\thandle(0x%04x), enclosure logical id(0x%016llx)"
+ " number slots(%d)\n", ioc->name, reason_str,
+ le16_to_cpu(event_data->EnclosureHandle),
+ (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
+ le16_to_cpu(event_data->StartSlot));
+}
+#endif
+
+/**
+ * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
+ * @ioc: per adapter object
+ * @VF_ID:
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc,
+ u8 VF_ID, Mpi2EventDataSasEnclDevStatusChange_t *event_data)
+{
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_sas_enclosure_dev_status_change_event_debug(ioc,
+ event_data);
+#endif
+}
+
+/**
+ * _scsih_sas_broadcast_primative_event - handle broadcast events
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataSasBroadcastPrimitive_t *event_data)
+{
+ struct scsi_cmnd *scmd;
+ u16 smid, handle;
+ u32 lun;
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ u32 termination_count;
+ u32 query_count;
+ Mpi2SCSITaskManagementReply_t *mpi_reply;
+
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: "
+ "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
+ event_data->PortWidth));
+
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ __func__));
+
+ mutex_lock(&ioc->tm_cmds.mutex);
+ termination_count = 0;
+ query_count = 0;
+ mpi_reply = ioc->tm_cmds.reply;
+ for (smid = 1; smid <= ioc->request_depth; smid++) {
+ scmd = _scsih_scsi_lookup_get(ioc, smid);
+ if (!scmd)
+ continue;
+ sas_device_priv_data = scmd->device->hostdata;
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
+ continue;
+ /* skip hidden raid components */
+ if (sas_device_priv_data->sas_target->flags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT)
+ continue;
+ /* skip volumes */
+ if (sas_device_priv_data->sas_target->flags &
+ MPT_TARGET_FLAGS_VOLUME)
+ continue;
+
+ handle = sas_device_priv_data->sas_target->handle;
+ lun = sas_device_priv_data->lun;
+ query_count++;
+
+ mpt2sas_scsih_issue_tm(ioc, handle, lun,
+ MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
+ termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+
+ if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
+ (mpi_reply->ResponseCode ==
+ MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+ mpi_reply->ResponseCode ==
+ MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
+ continue;
+
+ mpt2sas_scsih_issue_tm(ioc, handle, lun,
+ MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30);
+ termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+ }
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+ ioc->broadcast_aen_busy = 0;
+ mutex_unlock(&ioc->tm_cmds.mutex);
+
+ dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ "%s - exit, query_count = %d termination_count = %d\n",
+ ioc->name, __func__, query_count, termination_count));
+}
+
+/**
+ * _scsih_sas_discovery_event - handle discovery events
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataSasDiscovery_t *event_data)
+{
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
+ printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name,
+ (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
+ "start" : "stop");
+ if (event_data->DiscoveryStatus)
+ printk(MPT2SAS_DEBUG_FMT ", discovery_status(0x%08x)",
+ ioc->name, le32_to_cpu(event_data->DiscoveryStatus));
+ printk("\n");
+ }
+#endif
+
+ if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
+ !ioc->sas_hba.num_phys)
+ _scsih_sas_host_add(ioc);
+}
+
+/**
+ * _scsih_reprobe_lun - reprobing lun
+ * @sdev: scsi device struct
+ * @no_uld_attach: sdev->no_uld_attach flag setting
+ *
+ **/
+static void
+_scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
+{
+ int rc;
+
+ sdev->no_uld_attach = no_uld_attach ? 1 : 0;
+ sdev_printk(KERN_INFO, sdev, "%s raid component\n",
+ sdev->no_uld_attach ? "hidding" : "exposing");
+ rc = scsi_device_reprobe(sdev);
+}
+
+/**
+ * _scsih_reprobe_target - reprobing target
+ * @starget: scsi target struct
+ * @no_uld_attach: sdev->no_uld_attach flag setting
+ *
+ * Note: no_uld_attach flag determines whether the disk device is attached
+ * to block layer. A value of `1` means to not attach.
+ **/
+static void
+_scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach)
+{
+ struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata;
+
+ if (no_uld_attach)
+ sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+ else
+ sas_target_priv_data->flags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+
+ starget_for_each_device(starget, no_uld_attach ? (void *)1 : NULL,
+ _scsih_reprobe_lun);
+}
+/**
+ * _scsih_sas_volume_add - add new volume
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventIrConfigElement_t *element)
+{
+ struct _raid_device *raid_device;
+ unsigned long flags;
+ u64 wwid;
+ u16 handle = le16_to_cpu(element->VolDevHandle);
+ int rc;
+
+#if 0 /* RAID_HACKS */
+ if (le32_to_cpu(event_data->Flags) &
+ MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+ return;
+#endif
+
+ mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
+ if (!wwid) {
+ printk(MPT2SAS_ERR_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+ if (raid_device)
+ return;
+
+ raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+ if (!raid_device) {
+ printk(MPT2SAS_ERR_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__);
+ return;
+ }
+
+ raid_device->id = ioc->sas_id++;
+ raid_device->channel = RAID_CHANNEL;
+ raid_device->handle = handle;
+ raid_device->wwid = wwid;
+ _scsih_raid_device_add(ioc, raid_device);
+ if (!ioc->wait_for_port_enable_to_complete) {
+ rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+ raid_device->id, 0);
+ if (rc)
+ _scsih_raid_device_remove(ioc, raid_device);
+ } else
+ _scsih_determine_boot_device(ioc, raid_device, 1);
+}
+
+/**
+ * _scsih_sas_volume_delete - delete volume
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventIrConfigElement_t *element)
+{
+ struct _raid_device *raid_device;
+ u16 handle = le16_to_cpu(element->VolDevHandle);
+ unsigned long flags;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+
+#if 0 /* RAID_HACKS */
+ if (le32_to_cpu(event_data->Flags) &
+ MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
+ return;
+#endif
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ if (!raid_device)
+ return;
+ if (raid_device->starget) {
+ sas_target_priv_data = raid_device->starget->hostdata;
+ sas_target_priv_data->deleted = 1;
+ scsi_remove_target(&raid_device->starget->dev);
+ }
+ _scsih_raid_device_remove(ioc, raid_device);
+}
+
+/**
+ * _scsih_sas_pd_expose - expose pd component to /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventIrConfigElement_t *element)
+{
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device)
+ return;
+
+ /* exposing raid component */
+ sas_device->volume_handle = 0;
+ sas_device->volume_wwid = 0;
+ sas_device->hidden_raid_component = 0;
+ _scsih_reprobe_target(sas_device->starget, 0);
+}
+
+/**
+ * _scsih_sas_pd_hide - hide pd component from /dev/sdX
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventIrConfigElement_t *element)
+{
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device)
+ return;
+
+ /* hiding raid component */
+ mpt2sas_config_get_volume_handle(ioc, handle,
+ &sas_device->volume_handle);
+ mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle,
+ &sas_device->volume_wwid);
+ sas_device->hidden_raid_component = 1;
+ _scsih_reprobe_target(sas_device->starget, 1);
+}
+
+/**
+ * _scsih_sas_pd_delete - delete pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventIrConfigElement_t *element)
+{
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device)
+ return;
+ _scsih_remove_device(ioc, handle);
+}
+
+/**
+ * _scsih_sas_pd_add - remove pd component
+ * @ioc: per adapter object
+ * @element: IR config element data
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventIrConfigElement_t *element)
+{
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_device)
+ sas_device->hidden_raid_component = 1;
+ else
+ _scsih_add_device(ioc, handle, 0, 1);
+}
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+/**
+ * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+ Mpi2EventIrConfigElement_t *element;
+ u8 element_type;
+ int i;
+ char *reason_str = NULL, *element_str = NULL;
+
+ element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+
+ printk(MPT2SAS_DEBUG_FMT "raid config change: (%s), elements(%d)\n",
+ ioc->name, (le32_to_cpu(event_data->Flags) &
+ MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
+ "foreign" : "native", event_data->NumElements);
+ for (i = 0; i < event_data->NumElements; i++, element++) {
+ switch (element->ReasonCode) {
+ case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+ reason_str = "add";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+ reason_str = "remove";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
+ reason_str = "no change";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+ reason_str = "hide";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+ reason_str = "unhide";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+ reason_str = "volume_created";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+ reason_str = "volume_deleted";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+ reason_str = "pd_created";
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+ reason_str = "pd_deleted";
+ break;
+ default:
+ reason_str = "unknown reason";
+ break;
+ }
+ element_type = le16_to_cpu(element->ElementFlags) &
+ MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
+ switch (element_type) {
+ case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
+ element_str = "volume";
+ break;
+ case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
+ element_str = "phys disk";
+ break;
+ case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
+ element_str = "hot spare";
+ break;
+ default:
+ element_str = "unknown element";
+ break;
+ }
+ printk(KERN_DEBUG "\t(%s:%s), vol handle(0x%04x), "
+ "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
+ reason_str, le16_to_cpu(element->VolDevHandle),
+ le16_to_cpu(element->PhysDiskDevHandle),
+ element->PhysDiskNum);
+ }
+}
+#endif
+
+/**
+ * _scsih_sas_ir_config_change_event - handle ir configuration change events
+ * @ioc: per adapter object
+ * @VF_ID:
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataIrConfigChangeList_t *event_data)
+{
+ Mpi2EventIrConfigElement_t *element;
+ int i;
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_sas_ir_config_change_event_debug(ioc, event_data);
+
+#endif
+
+ element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
+ for (i = 0; i < event_data->NumElements; i++, element++) {
+
+ switch (element->ReasonCode) {
+ case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
+ case MPI2_EVENT_IR_CHANGE_RC_ADDED:
+ _scsih_sas_volume_add(ioc, element);
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
+ case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
+ _scsih_sas_volume_delete(ioc, element);
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
+ _scsih_sas_pd_hide(ioc, element);
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
+ _scsih_sas_pd_expose(ioc, element);
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_HIDE:
+ _scsih_sas_pd_add(ioc, element);
+ break;
+ case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
+ _scsih_sas_pd_delete(ioc, element);
+ break;
+ }
+ }
+}
+
+/**
+ * _scsih_sas_ir_volume_event - IR volume event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataIrVolume_t *event_data)
+{
+ u64 wwid;
+ unsigned long flags;
+ struct _raid_device *raid_device;
+ u16 handle;
+ u32 state;
+ int rc;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+
+ if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
+ return;
+
+ handle = le16_to_cpu(event_data->VolDevHandle);
+ state = le32_to_cpu(event_data->NewValue);
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), "
+ "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
+ le32_to_cpu(event_data->PreviousValue), state));
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+
+ switch (state) {
+ case MPI2_RAID_VOL_STATE_MISSING:
+ case MPI2_RAID_VOL_STATE_FAILED:
+ if (!raid_device)
+ break;
+ if (raid_device->starget) {
+ sas_target_priv_data = raid_device->starget->hostdata;
+ sas_target_priv_data->deleted = 1;
+ scsi_remove_target(&raid_device->starget->dev);
+ }
+ _scsih_raid_device_remove(ioc, raid_device);
+ break;
+
+ case MPI2_RAID_VOL_STATE_ONLINE:
+ case MPI2_RAID_VOL_STATE_DEGRADED:
+ case MPI2_RAID_VOL_STATE_OPTIMAL:
+ if (raid_device)
+ break;
+
+ mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
+ if (!wwid) {
+ printk(MPT2SAS_ERR_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__);
+ break;
+ }
+
+ raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
+ if (!raid_device) {
+ printk(MPT2SAS_ERR_FMT
+ "failure at %s:%d/%s()!\n", ioc->name,
+ __FILE__, __LINE__, __func__);
+ break;
+ }
+
+ raid_device->id = ioc->sas_id++;
+ raid_device->channel = RAID_CHANNEL;
+ raid_device->handle = handle;
+ raid_device->wwid = wwid;
+ _scsih_raid_device_add(ioc, raid_device);
+ rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+ raid_device->id, 0);
+ if (rc)
+ _scsih_raid_device_remove(ioc, raid_device);
+ break;
+
+ case MPI2_RAID_VOL_STATE_INITIALIZING:
+ default:
+ break;
+ }
+}
+
+/**
+ * _scsih_sas_ir_physical_disk_event - PD event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataIrPhysicalDisk_t *event_data)
+{
+ u16 handle;
+ u32 state;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+
+ if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
+ return;
+
+ handle = le16_to_cpu(event_data->PhysDiskDevHandle);
+ state = le32_to_cpu(event_data->NewValue);
+
+ dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle(0x%04x), "
+ "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle,
+ le32_to_cpu(event_data->PreviousValue), state));
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ switch (state) {
+#if 0
+ case MPI2_RAID_PD_STATE_OFFLINE:
+ if (sas_device)
+ _scsih_remove_device(ioc, handle);
+ break;
+#endif
+ case MPI2_RAID_PD_STATE_ONLINE:
+ case MPI2_RAID_PD_STATE_DEGRADED:
+ case MPI2_RAID_PD_STATE_REBUILDING:
+ case MPI2_RAID_PD_STATE_OPTIMAL:
+ if (sas_device)
+ sas_device->hidden_raid_component = 1;
+ else
+ _scsih_add_device(ioc, handle, 0, 1);
+ break;
+
+ case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
+ case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
+ case MPI2_RAID_PD_STATE_HOT_SPARE:
+ default:
+ break;
+ }
+}
+
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+/**
+ * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc,
+ Mpi2EventDataIrOperationStatus_t *event_data)
+{
+ char *reason_str = NULL;
+
+ switch (event_data->RAIDOperation) {
+ case MPI2_EVENT_IR_RAIDOP_RESYNC:
+ reason_str = "resync";
+ break;
+ case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
+ reason_str = "online capacity expansion";
+ break;
+ case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
+ reason_str = "consistency check";
+ break;
+ default:
+ reason_str = "unknown reason";
+ break;
+ }
+
+ printk(MPT2SAS_INFO_FMT "raid operational status: (%s)"
+ "\thandle(0x%04x), percent complete(%d)\n",
+ ioc->name, reason_str,
+ le16_to_cpu(event_data->VolDevHandle),
+ event_data->PercentComplete);
+}
+#endif
+
+/**
+ * _scsih_sas_ir_operation_status_event - handle RAID operation events
+ * @ioc: per adapter object
+ * @VF_ID:
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataIrOperationStatus_t *event_data)
+{
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_sas_ir_operation_status_event_debug(ioc, event_data);
+#endif
+}
+
+/**
+ * _scsih_task_set_full - handle task set full
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Throttle back qdepth.
+ */
+static void
+_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
+ Mpi2EventDataTaskSetFull_t *event_data)
+{
+ unsigned long flags;
+ struct _sas_device *sas_device;
+ static struct _raid_device *raid_device;
+ struct scsi_device *sdev;
+ int depth;
+ u16 current_depth;
+ u16 handle;
+ int id, channel;
+ u64 sas_address;
+
+ current_depth = le16_to_cpu(event_data->CurrentDepth);
+ handle = le16_to_cpu(event_data->DevHandle);
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ id = sas_device->id;
+ channel = sas_device->channel;
+ sas_address = sas_device->sas_address;
+
+ /* if hidden raid component, then change to volume characteristics */
+ if (sas_device->hidden_raid_component && sas_device->volume_handle) {
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = _scsih_raid_device_find_by_handle(
+ ioc, sas_device->volume_handle);
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ if (raid_device) {
+ id = raid_device->id;
+ channel = raid_device->channel;
+ handle = raid_device->handle;
+ sas_address = raid_device->wwid;
+ }
+ }
+
+ if (ioc->logging_level & MPT_DEBUG_TASK_SET_FULL)
+ starget_printk(KERN_DEBUG, sas_device->starget, "task set "
+ "full: handle(0x%04x), sas_addr(0x%016llx), depth(%d)\n",
+ handle, (unsigned long long)sas_address, current_depth);
+
+ shost_for_each_device(sdev, ioc->shost) {
+ if (sdev->id == id && sdev->channel == channel) {
+ if (current_depth > sdev->queue_depth) {
+ if (ioc->logging_level &
+ MPT_DEBUG_TASK_SET_FULL)
+ sdev_printk(KERN_INFO, sdev, "strange "
+ "observation, the queue depth is"
+ " (%d) meanwhile fw queue depth "
+ "is (%d)\n", sdev->queue_depth,
+ current_depth);
+ continue;
+ }
+ depth = scsi_track_queue_full(sdev,
+ current_depth - 1);
+ if (depth > 0)
+ sdev_printk(KERN_INFO, sdev, "Queue depth "
+ "reduced to (%d)\n", depth);
+ else if (depth < 0)
+ sdev_printk(KERN_INFO, sdev, "Tagged Command "
+ "Queueing is being disabled\n");
+ else if (depth == 0)
+ if (ioc->logging_level &
+ MPT_DEBUG_TASK_SET_FULL)
+ sdev_printk(KERN_INFO, sdev,
+ "Queue depth not changed yet\n");
+ }
+ }
+}
+
+/**
+ * _scsih_mark_responding_sas_device - mark a sas_devices as responding
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @slot: enclosure slot id
+ * @handle: device handle
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsi_remove_unresponsive_sas_devices.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
+ u16 slot, u16 handle)
+{
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct scsi_target *starget;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
+ if (sas_device->sas_address == sas_address &&
+ sas_device->slot == slot && sas_device->starget) {
+ sas_device->responding = 1;
+ starget_printk(KERN_INFO, sas_device->starget,
+ "handle(0x%04x), sas_addr(0x%016llx), enclosure "
+ "logical id(0x%016llx), slot(%d)\n", handle,
+ (unsigned long long)sas_device->sas_address,
+ (unsigned long long)
+ sas_device->enclosure_logical_id,
+ sas_device->slot);
+ if (sas_device->handle == handle)
+ goto out;
+ printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
+ sas_device->handle);
+ sas_device->handle = handle;
+ starget = sas_device->starget;
+ sas_target_priv_data = starget->hostdata;
+ sas_target_priv_data->handle = handle;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_sas_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ __le64 sas_address;
+ u16 handle;
+ u32 device_info;
+ u16 slot;
+
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+
+ if (list_empty(&ioc->sas_device_list))
+ return;
+
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+ &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
+ handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(sas_device_pg0.DevHandle);
+ device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
+ if (!(_scsih_is_end_device(device_info)))
+ continue;
+ sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ slot = le16_to_cpu(sas_device_pg0.Slot);
+ _scsih_mark_responding_sas_device(ioc, sas_address, slot,
+ handle);
+ }
+}
+
+/**
+ * _scsih_mark_responding_raid_device - mark a raid_device as responding
+ * @ioc: per adapter object
+ * @wwid: world wide identifier for raid volume
+ * @handle: device handle
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsi_remove_unresponsive_raid_devices.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid,
+ u16 handle)
+{
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct scsi_target *starget;
+ struct _raid_device *raid_device;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
+ if (raid_device->wwid == wwid && raid_device->starget) {
+ raid_device->responding = 1;
+ starget_printk(KERN_INFO, raid_device->starget,
+ "handle(0x%04x), wwid(0x%016llx)\n", handle,
+ (unsigned long long)raid_device->wwid);
+ if (raid_device->handle == handle)
+ goto out;
+ printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
+ raid_device->handle);
+ raid_device->handle = handle;
+ starget = raid_device->starget;
+ sas_target_priv_data = starget->hostdata;
+ sas_target_priv_data->handle = handle;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_raid_devices -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2RaidVolPage1_t volume_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ u16 handle;
+
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+
+ if (list_empty(&ioc->raid_device_list))
+ return;
+
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(volume_pg1.DevHandle);
+ _scsih_mark_responding_raid_device(ioc,
+ le64_to_cpu(volume_pg1.WWID), handle);
+ }
+}
+
+/**
+ * _scsih_mark_responding_expander - mark a expander as responding
+ * @ioc: per adapter object
+ * @sas_address: sas address
+ * @handle:
+ *
+ * After host reset, find out whether devices are still responding.
+ * Used in _scsi_remove_unresponsive_expanders.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
+ u16 handle)
+{
+ struct _sas_node *sas_expander;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+ if (sas_expander->sas_address == sas_address) {
+ sas_expander->responding = 1;
+ if (sas_expander->handle != handle) {
+ printk(KERN_INFO "old handle(0x%04x)\n",
+ sas_expander->handle);
+ sas_expander->handle = handle;
+ }
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+}
+
+/**
+ * _scsih_search_responding_expanders -
+ * @ioc: per adapter object
+ *
+ * After host reset, find out whether devices are still responding.
+ * If not remove.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2ExpanderPage0_t expander_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 ioc_status;
+ __le64 sas_address;
+ u16 handle;
+
+ printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
+
+ if (list_empty(&ioc->sas_expander_list))
+ return;
+
+ handle = 0xFFFF;
+ while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
+ MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+
+ handle = le16_to_cpu(expander_pg0.DevHandle);
+ sas_address = le64_to_cpu(expander_pg0.SASAddress);
+ printk(KERN_INFO "\texpander present: handle(0x%04x), "
+ "sas_addr(0x%016llx)\n", handle,
+ (unsigned long long)sas_address);
+ _scsih_mark_responding_expander(ioc, sas_address, handle);
+ }
+
+}
+
+/**
+ * _scsih_remove_unresponding_devices - removing unresponding devices
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct _sas_device *sas_device, *sas_device_next;
+ struct _sas_node *sas_expander, *sas_expander_next;
+ struct _raid_device *raid_device, *raid_device_next;
+ unsigned long flags;
+
+ _scsih_search_responding_sas_devices(ioc);
+ _scsih_search_responding_raid_devices(ioc);
+ _scsih_search_responding_expanders(ioc);
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ ioc->shost_recovery = 0;
+ if (ioc->shost->shost_state == SHOST_RECOVERY) {
+ printk(MPT2SAS_INFO_FMT "putting controller into "
+ "SHOST_RUNNING\n", ioc->name);
+ scsi_host_set_state(ioc->shost, SHOST_RUNNING);
+ }
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ list_for_each_entry_safe(sas_device, sas_device_next,
+ &ioc->sas_device_list, list) {
+ if (sas_device->responding) {
+ sas_device->responding = 0;
+ continue;
+ }
+ if (sas_device->starget)
+ starget_printk(KERN_INFO, sas_device->starget,
+ "removing: handle(0x%04x), sas_addr(0x%016llx), "
+ "enclosure logical id(0x%016llx), slot(%d)\n",
+ sas_device->handle,
+ (unsigned long long)sas_device->sas_address,
+ (unsigned long long)
+ sas_device->enclosure_logical_id,
+ sas_device->slot);
+ _scsih_remove_device(ioc, sas_device->handle);
+ }
+
+ list_for_each_entry_safe(raid_device, raid_device_next,
+ &ioc->raid_device_list, list) {
+ if (raid_device->responding) {
+ raid_device->responding = 0;
+ continue;
+ }
+ if (raid_device->starget) {
+ starget_printk(KERN_INFO, raid_device->starget,
+ "removing: handle(0x%04x), wwid(0x%016llx)\n",
+ raid_device->handle,
+ (unsigned long long)raid_device->wwid);
+ scsi_remove_target(&raid_device->starget->dev);
+ }
+ _scsih_raid_device_remove(ioc, raid_device);
+ }
+
+ list_for_each_entry_safe(sas_expander, sas_expander_next,
+ &ioc->sas_expander_list, list) {
+ if (sas_expander->responding) {
+ sas_expander->responding = 0;
+ continue;
+ }
+ printk("\tremoving expander: handle(0x%04x), "
+ " sas_addr(0x%016llx)\n", sas_expander->handle,
+ (unsigned long long)sas_expander->sas_address);
+ _scsih_expander_remove(ioc, sas_expander->handle);
+ }
+}
+
+/**
+ * _firmware_event_work - delayed task for processing firmware events
+ * @ioc: per adapter object
+ * @work: equal to the fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_firmware_event_work(struct work_struct *work)
+{
+ struct fw_event_work *fw_event = container_of(work,
+ struct fw_event_work, work.work);
+ unsigned long flags;
+ struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
+
+ /* This is invoked by calling _scsih_queue_rescan(). */
+ if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
+ _scsih_fw_event_free(ioc, fw_event);
+ _scsih_sas_host_refresh(ioc, 1);
+ _scsih_remove_unresponding_devices(ioc);
+ return;
+ }
+
+ /* the queue is being flushed so ignore this event */
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ if (ioc->fw_events_off || ioc->remove_host) {
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+ _scsih_fw_event_free(ioc, fw_event);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+ spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+ if (ioc->shost_recovery) {
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+ _scsih_fw_event_requeue(ioc, fw_event, 1000);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+
+ switch (fw_event->event) {
+ case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+ _scsih_sas_topology_change_event(ioc, fw_event->VF_ID,
+ fw_event->event_data, fw_event);
+ break;
+ case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ _scsih_sas_device_status_change_event(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ case MPI2_EVENT_SAS_DISCOVERY:
+ _scsih_sas_discovery_event(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+ _scsih_sas_broadcast_primative_event(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+ _scsih_sas_enclosure_dev_status_change_event(ioc,
+ fw_event->VF_ID, fw_event->event_data);
+ break;
+ case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+ _scsih_sas_ir_config_change_event(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ case MPI2_EVENT_IR_VOLUME:
+ _scsih_sas_ir_volume_event(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ case MPI2_EVENT_IR_PHYSICAL_DISK:
+ _scsih_sas_ir_physical_disk_event(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ case MPI2_EVENT_IR_OPERATION_STATUS:
+ _scsih_sas_ir_operation_status_event(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ case MPI2_EVENT_TASK_SET_FULL:
+ _scsih_task_set_full(ioc, fw_event->VF_ID,
+ fw_event->event_data);
+ break;
+ }
+ _scsih_fw_event_free(ioc, fw_event);
+}
+
+/**
+ * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time)
+ * @ioc: per adapter object
+ * @VF_ID: virtual function id
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt.
+ *
+ * This function merely adds a new work task into ioc->firmware_event_thread.
+ * The tasks are worked from _firmware_event_work in user context.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+{
+ struct fw_event_work *fw_event;
+ Mpi2EventNotificationReply_t *mpi_reply;
+ unsigned long flags;
+ u16 event;
+
+ /* events turned off due to host reset or driver unloading */
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ if (ioc->fw_events_off || ioc->remove_host) {
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ event = le16_to_cpu(mpi_reply->Event);
+
+ switch (event) {
+ /* handle these */
+ case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
+ {
+ Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
+ (Mpi2EventDataSasBroadcastPrimitive_t *)
+ mpi_reply->EventData;
+
+ if (baen_data->Primitive !=
+ MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT ||
+ ioc->broadcast_aen_busy)
+ return;
+ ioc->broadcast_aen_busy = 1;
+ break;
+ }
+
+ case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
+ _scsih_check_topo_delete_events(ioc,
+ (Mpi2EventDataSasTopologyChangeList_t *)
+ mpi_reply->EventData);
+ break;
+
+ case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ case MPI2_EVENT_IR_OPERATION_STATUS:
+ case MPI2_EVENT_SAS_DISCOVERY:
+ case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
+ case MPI2_EVENT_IR_VOLUME:
+ case MPI2_EVENT_IR_PHYSICAL_DISK:
+ case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
+ case MPI2_EVENT_TASK_SET_FULL:
+ break;
+
+ default: /* ignore the rest */
+ return;
+ }
+
+ fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
+ if (!fw_event) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return;
+ }
+ fw_event->event_data =
+ kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC);
+ if (!fw_event->event_data) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ kfree(fw_event);
+ return;
+ }
+
+ memcpy(fw_event->event_data, mpi_reply->EventData,
+ mpi_reply->EventDataLength*4);
+ fw_event->ioc = ioc;
+ fw_event->VF_ID = VF_ID;
+ fw_event->event = event;
+ _scsih_fw_event_add(ioc, fw_event);
+}
+
+/* shost template */
+static struct scsi_host_template scsih_driver_template = {
+ .module = THIS_MODULE,
+ .name = "Fusion MPT SAS Host",
+ .proc_name = MPT2SAS_DRIVER_NAME,
+ .queuecommand = scsih_qcmd,
+ .target_alloc = scsih_target_alloc,
+ .slave_alloc = scsih_slave_alloc,
+ .slave_configure = scsih_slave_configure,
+ .target_destroy = scsih_target_destroy,
+ .slave_destroy = scsih_slave_destroy,
+ .change_queue_depth = scsih_change_queue_depth,
+ .change_queue_type = scsih_change_queue_type,
+ .eh_abort_handler = scsih_abort,
+ .eh_device_reset_handler = scsih_dev_reset,
+ .eh_host_reset_handler = scsih_host_reset,
+ .bios_param = scsih_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = MPT2SAS_SG_DEPTH,
+ .max_sectors = 8192,
+ .cmd_per_lun = 7,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = mpt2sas_host_attrs,
+ .sdev_attrs = mpt2sas_dev_attrs,
+};
+
+/**
+ * _scsih_expander_node_remove - removing expander device from list.
+ * @ioc: per adapter object
+ * @sas_expander: the sas_device object
+ * Context: Calling function should acquire ioc->sas_node_lock.
+ *
+ * Removing object and freeing associated memory from the
+ * ioc->sas_expander_list.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
+ struct _sas_node *sas_expander)
+{
+ struct _sas_port *mpt2sas_port;
+ struct _sas_device *sas_device;
+ struct _sas_node *expander_sibling;
+ unsigned long flags;
+
+ if (!sas_expander)
+ return;
+
+ /* remove sibling ports attached to this expander */
+ retry_device_search:
+ list_for_each_entry(mpt2sas_port,
+ &sas_expander->sas_port_list, port_list) {
+ if (mpt2sas_port->remote_identify.device_type ==
+ SAS_END_DEVICE) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device =
+ mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ mpt2sas_port->remote_identify.sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device)
+ continue;
+ _scsih_remove_device(ioc, sas_device->handle);
+ goto retry_device_search;
+ }
+ }
+
+ retry_expander_search:
+ list_for_each_entry(mpt2sas_port,
+ &sas_expander->sas_port_list, port_list) {
+
+ if (mpt2sas_port->remote_identify.device_type ==
+ MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+ mpt2sas_port->remote_identify.device_type ==
+ MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ expander_sibling =
+ mpt2sas_scsih_expander_find_by_sas_address(
+ ioc, mpt2sas_port->remote_identify.sas_address);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ if (!expander_sibling)
+ continue;
+ _scsih_expander_remove(ioc, expander_sibling->handle);
+ goto retry_expander_search;
+ }
+ }
+
+ mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
+ sas_expander->parent_handle);
+
+ printk(MPT2SAS_INFO_FMT "expander_remove: handle"
+ "(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
+ sas_expander->handle, (unsigned long long)
+ sas_expander->sas_address);
+
+ list_del(&sas_expander->list);
+ kfree(sas_expander->phy);
+ kfree(sas_expander);
+}
+
+/**
+ * scsih_remove - detach and remove add host
+ * @pdev: PCI device struct
+ *
+ * Return nothing.
+ */
+static void __devexit
+scsih_remove(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ struct _sas_port *mpt2sas_port;
+ struct _sas_device *sas_device;
+ struct _sas_node *expander_sibling;
+ struct workqueue_struct *wq;
+ unsigned long flags;
+
+ ioc->remove_host = 1;
+ _scsih_fw_event_off(ioc);
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ wq = ioc->firmware_event_thread;
+ ioc->firmware_event_thread = NULL;
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+ if (wq)
+ destroy_workqueue(wq);
+
+ /* free ports attached to the sas_host */
+ retry_again:
+ list_for_each_entry(mpt2sas_port,
+ &ioc->sas_hba.sas_port_list, port_list) {
+ if (mpt2sas_port->remote_identify.device_type ==
+ SAS_END_DEVICE) {
+ sas_device =
+ mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ mpt2sas_port->remote_identify.sas_address);
+ if (sas_device) {
+ _scsih_remove_device(ioc, sas_device->handle);
+ goto retry_again;
+ }
+ } else {
+ expander_sibling =
+ mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ mpt2sas_port->remote_identify.sas_address);
+ if (expander_sibling) {
+ _scsih_expander_remove(ioc,
+ expander_sibling->handle);
+ goto retry_again;
+ }
+ }
+ }
+
+ /* free phys attached to the sas_host */
+ if (ioc->sas_hba.num_phys) {
+ kfree(ioc->sas_hba.phy);
+ ioc->sas_hba.phy = NULL;
+ ioc->sas_hba.num_phys = 0;
+ }
+
+ sas_remove_host(shost);
+ mpt2sas_base_detach(ioc);
+ list_del(&ioc->list);
+ scsi_remove_host(shost);
+ scsi_host_put(shost);
+}
+
+/**
+ * _scsih_probe_boot_devices - reports 1st device
+ * @ioc: per adapter object
+ *
+ * If specified in bios page 2, this routine reports the 1st
+ * device scsi-ml or sas transport for persistent boot device
+ * purposes. Please refer to function _scsih_determine_boot_device()
+ */
+static void
+_scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
+{
+ u8 is_raid;
+ void *device;
+ struct _sas_device *sas_device;
+ struct _raid_device *raid_device;
+ u16 handle, parent_handle;
+ u64 sas_address;
+ unsigned long flags;
+ int rc;
+
+ device = NULL;
+ if (ioc->req_boot_device.device) {
+ device = ioc->req_boot_device.device;
+ is_raid = ioc->req_boot_device.is_raid;
+ } else if (ioc->req_alt_boot_device.device) {
+ device = ioc->req_alt_boot_device.device;
+ is_raid = ioc->req_alt_boot_device.is_raid;
+ } else if (ioc->current_boot_device.device) {
+ device = ioc->current_boot_device.device;
+ is_raid = ioc->current_boot_device.is_raid;
+ }
+
+ if (!device)
+ return;
+
+ if (is_raid) {
+ raid_device = device;
+ rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+ raid_device->id, 0);
+ if (rc)
+ _scsih_raid_device_remove(ioc, raid_device);
+ } else {
+ sas_device = device;
+ handle = sas_device->handle;
+ parent_handle = sas_device->parent_handle;
+ sas_address = sas_device->sas_address;
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_move_tail(&sas_device->list, &ioc->sas_device_list);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+ sas_device->parent_handle)) {
+ _scsih_sas_device_remove(ioc, sas_device);
+ } else if (!sas_device->starget) {
+ mpt2sas_transport_port_remove(ioc, sas_address,
+ parent_handle);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
+ }
+}
+
+/**
+ * _scsih_probe_raid - reporting raid volumes to scsi-ml
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct _raid_device *raid_device, *raid_next;
+ int rc;
+
+ list_for_each_entry_safe(raid_device, raid_next,
+ &ioc->raid_device_list, list) {
+ if (raid_device->starget)
+ continue;
+ rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
+ raid_device->id, 0);
+ if (rc)
+ _scsih_raid_device_remove(ioc, raid_device);
+ }
+}
+
+/**
+ * _scsih_probe_sas - reporting raid volumes to sas transport
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
+{
+ struct _sas_device *sas_device, *next;
+ unsigned long flags;
+ u16 handle, parent_handle;
+ u64 sas_address;
+
+ /* SAS Device List */
+ list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
+ list) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ list_move_tail(&sas_device->list, &ioc->sas_device_list);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ handle = sas_device->handle;
+ parent_handle = sas_device->parent_handle;
+ sas_address = sas_device->sas_address;
+ if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ _scsih_sas_device_remove(ioc, sas_device);
+ } else if (!sas_device->starget) {
+ mpt2sas_transport_port_remove(ioc, sas_address,
+ parent_handle);
+ _scsih_sas_device_remove(ioc, sas_device);
+ }
+ }
+}
+
+/**
+ * _scsih_probe_devices - probing for devices
+ * @ioc: per adapter object
+ *
+ * Called during initial loading of the driver.
+ */
+static void
+_scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
+{
+ u16 volume_mapping_flags =
+ le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+ MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
+
+ if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
+ return; /* return when IOC doesn't support initiator mode */
+
+ _scsih_probe_boot_devices(ioc);
+
+ if (ioc->ir_firmware) {
+ if ((volume_mapping_flags &
+ MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) {
+ _scsih_probe_sas(ioc);
+ _scsih_probe_raid(ioc);
+ } else {
+ _scsih_probe_raid(ioc);
+ _scsih_probe_sas(ioc);
+ }
+ } else
+ _scsih_probe_sas(ioc);
+}
+
+/**
+ * scsih_probe - attach and add scsi host
+ * @pdev: PCI device struct
+ * @id: pci device id
+ *
+ * Returns 0 success, anything else error.
+ */
+static int
+scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct MPT2SAS_ADAPTER *ioc;
+ struct Scsi_Host *shost;
+
+ shost = scsi_host_alloc(&scsih_driver_template,
+ sizeof(struct MPT2SAS_ADAPTER));
+ if (!shost)
+ return -ENODEV;
+
+ /* init local params */
+ ioc = shost_priv(shost);
+ memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER));
+ INIT_LIST_HEAD(&ioc->list);
+ list_add_tail(&ioc->list, &ioc_list);
+ ioc->shost = shost;
+ ioc->id = mpt_ids++;
+ sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id);
+ ioc->pdev = pdev;
+ ioc->scsi_io_cb_idx = scsi_io_cb_idx;
+ ioc->tm_cb_idx = tm_cb_idx;
+ ioc->ctl_cb_idx = ctl_cb_idx;
+ ioc->base_cb_idx = base_cb_idx;
+ ioc->transport_cb_idx = transport_cb_idx;
+ ioc->config_cb_idx = config_cb_idx;
+ ioc->logging_level = logging_level;
+ /* misc semaphores and spin locks */
+ spin_lock_init(&ioc->ioc_reset_in_progress_lock);
+ spin_lock_init(&ioc->scsi_lookup_lock);
+ spin_lock_init(&ioc->sas_device_lock);
+ spin_lock_init(&ioc->sas_node_lock);
+ spin_lock_init(&ioc->fw_event_lock);
+ spin_lock_init(&ioc->raid_device_lock);
+
+ INIT_LIST_HEAD(&ioc->sas_device_list);
+ INIT_LIST_HEAD(&ioc->sas_device_init_list);
+ INIT_LIST_HEAD(&ioc->sas_expander_list);
+ INIT_LIST_HEAD(&ioc->fw_event_list);
+ INIT_LIST_HEAD(&ioc->raid_device_list);
+ INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
+
+ /* init shost parameters */
+ shost->max_cmd_len = 16;
+ shost->max_lun = max_lun;
+ shost->transportt = mpt2sas_transport_template;
+ shost->unique_id = ioc->id;
+
+ if ((scsi_add_host(shost, &pdev->dev))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ list_del(&ioc->list);
+ goto out_add_shost_fail;
+ }
+
+ /* event thread */
+ snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
+ "fw_event%d", ioc->id);
+ ioc->firmware_event_thread = create_singlethread_workqueue(
+ ioc->firmware_event_name);
+ if (!ioc->firmware_event_thread) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out_thread_fail;
+ }
+
+ ioc->wait_for_port_enable_to_complete = 1;
+ if ((mpt2sas_base_attach(ioc))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ goto out_attach_fail;
+ }
+
+ ioc->wait_for_port_enable_to_complete = 0;
+ _scsih_probe_devices(ioc);
+ return 0;
+
+ out_attach_fail:
+ destroy_workqueue(ioc->firmware_event_thread);
+ out_thread_fail:
+ list_del(&ioc->list);
+ scsi_remove_host(shost);
+ out_add_shost_fail:
+ return -ENODEV;
+}
+
+#ifdef CONFIG_PM
+/**
+ * scsih_suspend - power management suspend main entry point
+ * @pdev: PCI device struct
+ * @state: PM state change to (usually PCI_D3)
+ *
+ * Returns 0 success, anything else error.
+ */
+static int
+scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ u32 device_state;
+
+ flush_scheduled_work();
+ scsi_block_requests(shost);
+ device_state = pci_choose_state(pdev, state);
+ printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering "
+ "operating state [D%d]\n", ioc->name, pdev,
+ pci_name(pdev), device_state);
+
+ mpt2sas_base_free_resources(ioc);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, device_state);
+ return 0;
+}
+
+/**
+ * scsih_resume - power management resume main entry point
+ * @pdev: PCI device struct
+ *
+ * Returns 0 success, anything else error.
+ */
+static int
+scsih_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ u32 device_state = pdev->current_state;
+ int r;
+
+ printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous "
+ "operating state [D%d]\n", ioc->name, pdev,
+ pci_name(pdev), device_state);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+ ioc->pdev = pdev;
+ r = mpt2sas_base_map_resources(ioc);
+ if (r)
+ return r;
+
+ mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
+ scsi_unblock_requests(shost);
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+
+static struct pci_driver scsih_driver = {
+ .name = MPT2SAS_DRIVER_NAME,
+ .id_table = scsih_pci_table,
+ .probe = scsih_probe,
+ .remove = __devexit_p(scsih_remove),
+#ifdef CONFIG_PM
+ .suspend = scsih_suspend,
+ .resume = scsih_resume,
+#endif
+};
+
+
+/**
+ * scsih_init - main entry point for this driver.
+ *
+ * Returns 0 success, anything else error.
+ */
+static int __init
+scsih_init(void)
+{
+ int error;
+
+ mpt_ids = 0;
+ printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME,
+ MPT2SAS_DRIVER_VERSION);
+
+ mpt2sas_transport_template =
+ sas_attach_transport(&mpt2sas_transport_functions);
+ if (!mpt2sas_transport_template)
+ return -ENODEV;
+
+ mpt2sas_base_initialize_callback_handler();
+
+ /* queuecommand callback hander */
+ scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done);
+
+ /* task managment callback handler */
+ tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done);
+
+ /* base internal commands callback handler */
+ base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
+
+ /* transport internal commands callback handler */
+ transport_cb_idx = mpt2sas_base_register_callback_handler(
+ mpt2sas_transport_done);
+
+ /* configuration page API internal commands callback handler */
+ config_cb_idx = mpt2sas_base_register_callback_handler(
+ mpt2sas_config_done);
+
+ /* ctl module callback handler */
+ ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done);
+
+ mpt2sas_ctl_init();
+
+ error = pci_register_driver(&scsih_driver);
+ if (error)
+ sas_release_transport(mpt2sas_transport_template);
+
+ return error;
+}
+
+/**
+ * scsih_exit - exit point for this driver (when it is a module).
+ *
+ * Returns 0 success, anything else error.
+ */
+static void __exit
+scsih_exit(void)
+{
+ printk(KERN_INFO "mpt2sas version %s unloading\n",
+ MPT2SAS_DRIVER_VERSION);
+
+ pci_unregister_driver(&scsih_driver);
+
+ sas_release_transport(mpt2sas_transport_template);
+ mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
+ mpt2sas_base_release_callback_handler(tm_cb_idx);
+ mpt2sas_base_release_callback_handler(base_cb_idx);
+ mpt2sas_base_release_callback_handler(transport_cb_idx);
+ mpt2sas_base_release_callback_handler(config_cb_idx);
+ mpt2sas_base_release_callback_handler(ctl_cb_idx);
+
+ mpt2sas_ctl_exit();
+}
+
+module_init(scsih_init);
+module_exit(scsih_exit);
