Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize
diff --git a/MAINTAINERS b/MAINTAINERS
index 51d42fb..5b368cc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -117,20 +117,20 @@
M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/3c505*
+F: drivers/net/ethernet/i825xx/3c505*
3C59X NETWORK DRIVER
M: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
L: netdev@vger.kernel.org
S: Maintained
F: Documentation/networking/vortex.txt
-F: drivers/net/3c59x.c
+F: drivers/net/ethernet/3com/3c59x.c
3CR990 NETWORK DRIVER
M: David Dillow <dave@thedillows.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/typhoon*
+F: drivers/net/ethernet/3com/typhoon*
3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS)
M: Adam Radford <linuxraid@lsi.com>
@@ -170,8 +170,7 @@
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
L: netdev@vger.kernel.org
S: Orphan / Obsolete
-F: drivers/net/*8390*
-F: drivers/net/ax88796.c
+F: drivers/net/ethernet/8390/
9P FILE SYSTEM
M: Eric Van Hensbergen <ericvh@gmail.com>
@@ -214,7 +213,7 @@
M: Jes Sorensen <jes@trained-monkey.org>
L: linux-acenic@sunsite.dk
S: Maintained
-F: drivers/net/acenic*
+F: drivers/net/ethernet/3com/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Feuerer <peter@piie.net>
@@ -746,7 +745,7 @@
W: http://www.arm.linux.org.uk/
S: Maintained
F: arch/arm/mach-ebsa110/
-F: drivers/net/arm/am79c961a.*
+F: drivers/net/ethernet/amd/am79c961a.*
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
M: Daniel Ribeiro <drwyrm@gmail.com>
@@ -1015,7 +1014,7 @@
F: arch/arm/include/asm/hardware/iomd.h
F: arch/arm/include/asm/hardware/memc.h
F: arch/arm/mach-rpc/
-F: drivers/net/arm/ether*
+F: drivers/net/arm/ether3*
F: drivers/scsi/arm/
ARM/SHARK MACHINE SUPPORT
@@ -1527,27 +1526,27 @@
M: Gary Zambrano <zambrano@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/b44.*
+F: drivers/net/ethernet/broadcom/b44.*
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/bnx2.*
-F: drivers/net/bnx2_*
+F: drivers/net/ethernet/broadcom/bnx2.*
+F: drivers/net/ethernet/broadcom/bnx2_*
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
M: Eilon Greenstein <eilong@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/bnx2x/
+F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Matt Carlson <mcarlson@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/tg3.*
+F: drivers/net/ethernet/broadcom/tg3.*
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
M: Brett Rudley <brudley@broadcom.com>
@@ -1995,7 +1994,7 @@
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
-F: drivers/net/cxgb3/
+F: drivers/net/ethernet/chelsio/cxgb3/
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
M: Steve Wise <swise@chelsio.com>
@@ -2009,7 +2008,7 @@
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
-F: drivers/net/cxgb4/
+F: drivers/net/ethernet/chelsio/cxgb4/
CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
M: Steve Wise <swise@chelsio.com>
@@ -2023,7 +2022,7 @@
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
-F: drivers/net/cxgb4vf/
+F: drivers/net/ethernet/chelsio/cxgb4vf/
STMMAC ETHERNET DRIVER
M: Giuseppe Cavallaro <peppe.cavallaro@st.com>
@@ -2511,7 +2510,7 @@
M: Philip Blundell <philb@gnu.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/eexpress.*
+F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@linux-foundation.org>
@@ -3341,13 +3340,13 @@
M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
-M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-2.6.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
S: Supported
F: Documentation/networking/e100.txt
F: Documentation/networking/e1000.txt
@@ -3357,14 +3356,7 @@
F: Documentation/networking/ixgb.txt
F: Documentation/networking/ixgbe.txt
F: Documentation/networking/ixgbevf.txt
-F: drivers/net/e100.c
-F: drivers/net/e1000/
-F: drivers/net/e1000e/
-F: drivers/net/igb/
-F: drivers/net/igbvf/
-F: drivers/net/ixgb/
-F: drivers/net/ixgbe/
-F: drivers/net/ixgbevf/
+F: drivers/net/ethernet/intel/
INTEL MRST PMU DRIVER
M: Len Brown <len.brown@intel.com>
@@ -4507,7 +4499,7 @@
L: netdev@vger.kernel.org
W: http://www.qlogic.com
S: Supported
-F: drivers/net/netxen/
+F: drivers/net/ethernet/qlogic/netxen/
NFS, SUNRPC, AND LOCKD CLIENTS
M: Trond Myklebust <Trond.Myklebust@netapp.com>
@@ -4941,7 +4933,7 @@
M: Don Fry <pcnet32@frontier.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/pcnet32.c
+F: drivers/net/ethernet/amd/pcnet32.c
PCRYPT PARALLEL CRYPTO ENGINE
M: Steffen Klassert <steffen.klassert@secunet.com>
@@ -5253,7 +5245,7 @@
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/LICENSE.qla3xxx
-F: drivers/net/qla3xxx.*
+F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Amit Kumar Salecha <amit.salecha@qlogic.com>
@@ -5261,7 +5253,7 @@
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/qlcnic/
+F: drivers/net/ethernet/qlogic/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
@@ -5269,7 +5261,7 @@
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/qlge/
+F: drivers/net/ethernet/qlogic/qlge/
QNX4 FILESYSTEM
M: Anders Larsen <al@alarsen.net>
@@ -5877,7 +5869,7 @@
SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Odd Fixes
-F: drivers/net/smc91x.*
+F: drivers/net/ethernet/smsc/smc91x.*
SMM665 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
@@ -5912,13 +5904,13 @@
L: netdev@vger.kernel.org
S: Supported
F: include/linux/smsc911x.h
-F: drivers/net/smsc911x.*
+F: drivers/net/ethernet/smsc/smsc911x.*
SMSC9420 PCI ETHERNET DRIVER
M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/smsc9420.*
+F: drivers/net/ethernet/smsc/smsc9420.*
SN-IA64 (Itanium) SUB-PLATFORM
M: Jes Sorensen <jes@sgi.com>
@@ -6568,7 +6560,7 @@
S: Supported
F: arch/h8300/
F: drivers/ide/ide-h8300.c
-F: drivers/net/ne-h8300.c
+F: drivers/net/ethernet/8390/ne-h8300.c
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
diff --git a/drivers/infiniband/hw/cxgb3/Makefile b/drivers/infiniband/hw/cxgb3/Makefile
index 621619c..2761364 100644
--- a/drivers/infiniband/hw/cxgb3/Makefile
+++ b/drivers/infiniband/hw/cxgb3/Makefile
@@ -1,4 +1,4 @@
-ccflags-y := -Idrivers/net/cxgb3
+ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb3
obj-$(CONFIG_INFINIBAND_CXGB3) += iw_cxgb3.o
diff --git a/drivers/infiniband/hw/cxgb4/Makefile b/drivers/infiniband/hw/cxgb4/Makefile
index cd20b13..46b878c 100644
--- a/drivers/infiniband/hw/cxgb4/Makefile
+++ b/drivers/infiniband/hw/cxgb4/Makefile
@@ -1,4 +1,4 @@
-ccflags-y := -Idrivers/net/cxgb4
+ccflags-y := -Idrivers/net/ethernet/chelsio/cxgb4
obj-$(CONFIG_INFINIBAND_CXGB4) += iw_cxgb4.o
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8d0314d..d7d0b35 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -193,6 +193,8 @@
# Ethernet
#
+source "drivers/net/ethernet/Kconfig"
+
menuconfig NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
depends on !UML
@@ -235,22 +237,6 @@
source "drivers/net/arm/Kconfig"
-config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS || SUPERH
- select PHYLIB
- select MDIO_BITBANG
- help
- AX88796 driver, using platform bus to provide
- chip detection and resources
-
-config AX88796_93CX6
- bool "ASIX AX88796 external 93CX6 eeprom support"
- depends on AX88796
- select EEPROM_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
@@ -285,71 +271,6 @@
To compile this driver as a module, choose M here: the module
will be called bmac.
-config ARIADNE
- tristate "Ariadne support"
- depends on ZORRO
- help
- If you have a Village Tronic Ariadne Ethernet adapter, say Y.
- Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called ariadne.
-
-config A2065
- tristate "A2065 support"
- depends on ZORRO
- select CRC32
- help
- If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the module
- will be called a2065.
-
-config HYDRA
- tristate "Hydra support"
- depends on ZORRO
- select CRC32
- help
- If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called hydra.
-
-config ZORRO8390
- tristate "Zorro NS8390-based Ethernet support"
- depends on ZORRO
- select CRC32
- help
- This driver is for Zorro Ethernet cards using an NS8390-compatible
- chipset, like the Village Tronic Ariadne II and the Individual
- Computers X-Surf Ethernet cards. If you have such a card, say Y.
- Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called zorro8390.
-
-config APNE
- tristate "PCMCIA NE2000 support"
- depends on AMIGA_PCMCIA
- select CRC32
- help
- If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the module
- will be called apne.
-
-config MAC8390
- bool "Macintosh NS 8390 based ethernet cards"
- depends on MAC
- select CRC32
- help
- If you want to include a driver to support Nubus or LC-PDS
- Ethernet cards using an NS8390 chipset or its equivalent, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on MAC
@@ -385,86 +306,6 @@
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
-config MVME147_NET
- tristate "MVME147 (Lance) Ethernet support"
- depends on MVME147
- select CRC32
- help
- Support for the on-board Ethernet interface on the Motorola MVME147
- single-board computer. Say Y here to include the
- driver for this chip in your kernel.
- To compile this driver as a module, choose M here.
-
-config MVME16x_NET
- tristate "MVME16x Ethernet support"
- depends on MVME16x
- help
- This is the driver for the Ethernet interface on the Motorola
- MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
- driver for this chip in your kernel.
- To compile this driver as a module, choose M here.
-
-config BVME6000_NET
- tristate "BVME6000 Ethernet support"
- depends on BVME6000
- help
- This is the driver for the Ethernet interface on BVME4000 and
- BVME6000 VME boards. Say Y here to include the driver for this chip
- in your kernel.
- To compile this driver as a module, choose M here.
-
-config ATARILANCE
- tristate "Atari Lance support"
- depends on ATARI
- help
- Say Y to include support for several Atari Ethernet adapters based
- on the AMD Lance chipset: RieblCard (with or without battery), or
- PAMCard VME (also the version by Rhotron, with different addresses).
-
-config SUN3LANCE
- tristate "Sun3/Sun3x on-board LANCE support"
- depends on SUN3 || SUN3X
- help
- Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
- featured an AMD Lance 10Mbit Ethernet controller on board; say Y
- here to compile in the Linux driver for this and enable Ethernet.
- General Linux information on the Sun 3 and 3x series (now
- discontinued) is at
- <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
- If you're not building a kernel for a Sun 3, say N.
-
-config SUN3_82586
- bool "Sun3 on-board Intel 82586 support"
- depends on SUN3
- help
- This driver enables support for the on-board Intel 82586 based
- Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
- that this driver does not support 82586-based adapters on additional
- VME boards.
-
-config HPLANCE
- bool "HP on-board LANCE support"
- depends on DIO
- select CRC32
- help
- If you want to use the builtin "LANCE" Ethernet controller on an
- HP300 machine, say Y here.
-
-config LASI_82596
- tristate "Lasi ethernet"
- depends on GSC
- help
- Say Y here to support the builtin Intel 82596 ethernet controller
- found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
-
-config SNI_82596
- tristate "SNI RM ethernet"
- depends on NET_ETHERNET && SNI_RM
- help
- Say Y here to support the on-board Intel 82596 ethernet controller
- built into SNI RM machines.
-
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on NET_ETHERNET && MIKROTIK_RB532
@@ -485,15 +326,6 @@
help
This is the driver for the onboard card of the Xtensa XT2000 board.
-config MIPS_AU1X00_ENET
- tristate "MIPS AU1000 Ethernet support"
- depends on MIPS_ALCHEMY
- select PHYLIB
- select CRC32
- help
- If you have an Alchemy Semi AU1X00 based system
- say Y. Otherwise, say N.
-
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
@@ -516,18 +348,6 @@
tristate "SGI O2 MACE Fast Ethernet support"
depends on SGI_IP32=y
-config STNIC
- tristate "National DP83902AV support"
- depends on SUPERH
- select CRC32
- help
- Support for cards based on the National Semiconductor DP83902AV
- ST-NIC Serial Network Interface Controller for Twisted Pair. This
- is a 10Mbit/sec Ethernet controller. Product overview and specs at
- <http://www.national.com/pf/DP/DP83902A.html>.
-
- If unsure, say N.
-
config SH_ETH
tristate "Renesas SuperH Ethernet support"
depends on SUPERH && \
@@ -543,19 +363,6 @@
This driver supporting CPUs are:
- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
-config SUNLANCE
- tristate "Sun LANCE support"
- depends on SBUS
- select CRC32
- help
- This driver supports the "le" interface present on all 32-bit Sparc
- systems, on some older Ultra systems and as an Sbus option. These
- cards are based on the AMD Lance chipset, which is better known
- via the NE2100 cards.
-
- To compile this driver as a module, choose M here: the module
- will be called sunlance.
-
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on SBUS || PCI
@@ -614,236 +421,6 @@
help
Support for virtual network devices under Sun Logical Domains.
-config NET_VENDOR_3COM
- bool "3COM cards"
- depends on ISA || EISA || MCA || PCI
- help
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about 3COM cards. If you say Y, you will be asked for
- your specific card in the following questions.
-
-config EL1
- tristate "3c501 \"EtherLink\" support"
- depends on NET_VENDOR_3COM && ISA
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Also, consider buying a
- new card, since the 3c501 is slow, broken, and obsolete: you will
- have problems. Some people suggest to ping ("man ping") a nearby
- machine every minute ("man cron") when using this card.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c501.
-
-config EL2
- tristate "3c503 \"EtherLink II\" support"
- depends on NET_VENDOR_3COM && ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c503.
-
-config ELPLUS
- tristate "3c505 \"EtherLink Plus\" support"
- depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
- ---help---
- Information about this network (Ethernet) card can be found in
- <file:Documentation/networking/3c505.txt>. If you have a card of
- this type, say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c505.
-
-config EL16
- tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c507.
-
-config EL3
- tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
- depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
- ---help---
- If you have a network (Ethernet) card belonging to the 3Com
- EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
- from <http://www.tldp.org/docs.html#howto>.
-
- If your card is not working you may need to use the DOS
- setup disk to disable Plug & Play mode, and to select the default
- media type.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c509.
-
-config 3C515
- tristate "3c515 ISA \"Fast EtherLink\""
- depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
- help
- If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
- network card, say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c515.
-
-config ELMC
- tristate "3c523 \"EtherLink/MC\" support"
- depends on NET_VENDOR_3COM && MCA_LEGACY
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c523.
-
-config ELMC_II
- tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c527.
-
-config VORTEX
- tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
- depends on NET_VENDOR_3COM && (PCI || EISA)
- select MII
- ---help---
- This option enables driver support for a large number of 10Mbps and
- 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
-
- "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
- "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
- "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
- "Tornado" (3c905) PCI
- "Hurricane" (3c555/3cSOHO) PCI
-
- If you have such a card, say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>. More
- specific information is in
- <file:Documentation/networking/vortex.txt> and in the comments at
- the beginning of <file:drivers/net/3c59x.c>.
-
- To compile this support as a module, choose M here.
-
-config TYPHOON
- tristate "3cr990 series \"Typhoon\" support"
- depends on NET_VENDOR_3COM && PCI
- select CRC32
- ---help---
- This option enables driver support for the 3cr990 series of cards:
-
- 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
- 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
- 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
-
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called typhoon.
-
-config LANCE
- tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
- depends on ISA && ISA_DMA_API
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
- of this type.
-
- To compile this driver as a module, choose M here: the module
- will be called lance. This is recommended.
-
-config NET_VENDOR_SMC
- bool "Western Digital/SMC cards"
- depends on ISA || MCA || EISA || MAC
- help
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Western Digital cards. If you say Y, you will be
- asked for your specific card in the following questions.
-
-config WD80x3
- tristate "WD80*3 support"
- depends on NET_VENDOR_SMC && ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called wd.
-
-config ULTRAMCA
- tristate "SMC Ultra MCA support"
- depends on NET_VENDOR_SMC && MCA
- select CRC32
- help
- If you have a network (Ethernet) card of this type and are running
- an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-mca.
-
-config ULTRA
- tristate "SMC Ultra support"
- depends on NET_VENDOR_SMC && ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Important: There have been many reports that, with some motherboards
- mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
- such as some BusLogic models) causes corruption problems with many
- operating systems. The Linux smc-ultra driver has a work-around for
- this but keep it in mind if you have such a SCSI card and have
- problems.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-ultra.
-
-config ULTRA32
- tristate "SMC Ultra32 EISA support"
- depends on NET_VENDOR_SMC && EISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-ultra32.
-
config BFIN_MAC
tristate "Blackfin on-chip MAC support"
depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
@@ -890,39 +467,6 @@
help
To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-config SMC9194
- tristate "SMC 9194 support"
- depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
- select CRC32
- ---help---
- This is support for the SMC9xxx based Ethernet cards. Choose this
- option if you have a DELL laptop with the docking station, or
- another SMC9192/9194 based chipset. Say Y if you want it compiled
- into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc9194.
-
-config SMC91X
- tristate "SMC 91C9x/91C1xxx support"
- select CRC32
- select MII
- depends on ARM || M32R || SUPERH || \
- MIPS || BLACKFIN || MN10300 || COLDFIRE
- help
- This is a driver for SMC's 91x series of Ethernet chipsets,
- including the SMC91C94 and the SMC91C111. Say Y if you want it
- compiled into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc91x. If you want to compile it as a
- module, say M here and read <file:Documentation/kbuild/modules.txt>.
-
config PXA168_ETH
tristate "Marvell pxa168 ethernet support"
depends on CPU_PXA168
@@ -1037,50 +581,12 @@
help
Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
-config SMC911X
- tristate "SMSC LAN911[5678] support"
- select CRC32
- select MII
- depends on ARM || SUPERH || MN10300
- help
- This is a driver for SMSC's LAN911x series of Ethernet chipsets
- including the new LAN9115, LAN9116, LAN9117, and LAN9118.
- Say Y if you want it compiled into the kernel,
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver is also available as a module. The module will be
- called smc911x. If you want to compile it as a module, say M
- here and read <file:Documentation/kbuild/modules.txt>
-
-config SMSC911X
- tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
- depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300
- select CRC32
- select MII
- select PHYLIB
- ---help---
- Say Y here if you want support for SMSC LAN911x and LAN921x families
- of ethernet controllers.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called smsc911x.
-
-config SMSC911X_ARCH_HOOKS
- def_bool n
- depends on SMSC911X
- help
- If the arch enables this, it allows the arch to implement various
- hooks for more comprehensive interrupt control and also to override
- the source of the MAC address.
-
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on ISA
help
If you have a network (Ethernet) card belonging to this class, such
- as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+ as the NI5010, say Y and read the Ethernet-HOWTO,
available from <http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
@@ -1100,28 +606,6 @@
To compile this driver as a module, choose M here. The module
will be called ni5010.
-config NI52
- tristate "NI5210 support"
- depends on NET_VENDOR_RACAL && ISA
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ni52.
-
-config NI65
- tristate "NI6510 support"
- depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ni65.
-
config DNET
tristate "Dave ethernet support (DNET)"
depends on NET_ETHERNET && HAS_IOMEM
@@ -1147,19 +631,6 @@
To compile this driver as a module, choose M here. The module
will be called at1700.
-config DEPCA
- tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
- depends on ISA || EISA || MCA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto> as well as
- <file:drivers/net/depca.c>.
-
- To compile this driver as a module, choose M here. The module
- will be called depca.
-
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
@@ -1188,18 +659,6 @@
the remaining ISA network card questions. If you say Y, you will be
asked for your specific card in the following questions.
-config E2100
- tristate "Cabletron E21xx support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called e2100.
-
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on NET_ISA
@@ -1214,65 +673,6 @@
To compile this driver as a module, choose M here. The module
will be called ewrk3.
-config EEXPRESS
- tristate "EtherExpress 16 support"
- depends on NET_ISA
- ---help---
- If you have an EtherExpress16 network (Ethernet) card, say Y and
- read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Note that the Intel
- EtherExpress16 card used to be regarded as a very poor choice
- because the driver was very unreliable. We now have a new driver
- that should do better.
-
- To compile this driver as a module, choose M here. The module
- will be called eexpress.
-
-config EEXPRESS_PRO
- tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
- depends on NET_ISA
- ---help---
- If you have a network (Ethernet) card of this type, say Y. This
- driver supports Intel i82595{FX,TX} based boards. Note however
- that the EtherExpress PRO/100 Ethernet card has its own separate
- driver. Please read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called eepro.
-
-config HPLAN_PLUS
- tristate "HP PCLAN+ (27247B and 27252A) support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp-plus.
-
-config HPLAN
- tristate "HP PCLAN (27245 and other 27xxx series) support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp.
-
-config LP486E
- tristate "LP486E on board Ethernet"
- depends on NET_ISA
- help
- Say Y here to support the 82596-based on-board Ethernet controller
- for the Panther motherboard, which is one of the two shipped in the
- Intel Professional Workstation.
-
config ETH16I
tristate "ICL EtherTeam 16i/32 support"
depends on NET_ISA
@@ -1284,36 +684,6 @@
To compile this driver as a module, choose M here. The module
will be called eth16i.
-config NE2000
- tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
- without a specific driver are compatible with NE2000.
-
- If you have a PCI NE2000 card however, say N here and Y to "PCI
- NE2000 and clone support" under "EISA, VLB, PCI and on board
- controllers" below. If you have a NE2000 card and are running on
- an MCA system (a bus system used on some IBM PS/2 computers and
- laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
- below.
-
- To compile this driver as a module, choose M here. The module
- will be called ne.
-
-config ZNET
- tristate "Zenith Z-Note support (EXPERIMENTAL)"
- depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
- help
- The Zenith Z-Note notebook computer has a built-in network
- (Ethernet) card, and this is the Linux driver for it. Note that the
- IBM Thinkpad 300 is compatible with the Z-Note and is also supported
- by this driver. Read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config SEEQ8005
tristate "SEEQ8005 support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL
@@ -1325,18 +695,6 @@
To compile this driver as a module, choose M here. The module
will be called seeq8005.
-config NE2_MCA
- tristate "NE/2 (ne2000 MCA version) support"
- depends on MCA_LEGACY
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ne2.
-
config IBMLANA
tristate "IBM LAN Adapter/A support"
depends on MCA
@@ -1378,32 +736,6 @@
will be asked for your specific card in the following questions. If
you are unsure, say Y.
-config PCNET32
- tristate "AMD PCnet32 PCI support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
- answer Y here and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called pcnet32.
-
-config AMD8111_ETH
- tristate "AMD 8111 (new PCI lance) support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- If you have an AMD 8111-based PCI lance ethernet card,
- answer Y here and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called amd8111e.
-
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
depends on NET_PCI && PCI
@@ -1418,18 +750,6 @@
To compile this driver as a module, choose M here: the module
will be called starfire. This is recommended.
-config AC3200
- tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
- depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ac3200.
-
config KSZ884X_PCI
tristate "Micrel KSZ8841/2 PCI"
depends on NET_PCI && PCI
@@ -1441,49 +761,6 @@
To compile this driver as a module, choose M here. The module
will be called ksz884x.
-config APRICOT
- tristate "Apricot Xen-II on board Ethernet"
- depends on NET_PCI && ISA
- help
- If you have a network (Ethernet) controller of this type, say Y and
- read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called apricot.
-
-config B44
- tristate "Broadcom 440x/47xx ethernet support"
- depends on SSB_POSSIBLE && HAS_DMA
- select SSB
- select MII
- help
- If you have a network (Ethernet) controller of this type, say Y
- or M and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called b44.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B44_PCI_AUTOSELECT
- bool
- depends on B44 && SSB_PCIHOST_POSSIBLE
- select SSB_PCIHOST
- default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B44_PCICORE_AUTOSELECT
- bool
- depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
- select SSB_DRIVER_PCICORE
- default y
-
-config B44_PCI
- bool
- depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- default y
-
config FORCEDETH
tristate "nForce Ethernet support"
depends on NET_PCI && PCI
@@ -1519,44 +796,6 @@
depends on NET_PCI && PCI && MIPS
select PHYLIB
-config E100
- tristate "Intel(R) PRO/100+ support"
- depends on NET_PCI && PCI
- select MII
- ---help---
- This driver supports Intel(R) PRO/100 family of adapters.
- To verify that your adapter is supported, find the board ID number
- on the adapter. Look for a label that has a barcode and a number
- in the format 123456-001 (six digits hyphen three digits).
-
- Use the above information and the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- to identify the adapter.
-
- For the latest Intel PRO/100 network driver for Linux, see:
-
- <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e100.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called e100.
-
-config LNE390
- tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called lne390.
-
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
@@ -1577,50 +816,6 @@
More specific information and updates are available from
<http://www.scyld.com/network/natsemi.html>.
-config NE2K_PCI
- tristate "PCI NE2000 and clones support (see help)"
- depends on NET_PCI && PCI
- select CRC32
- ---help---
- This driver is for NE2000 compatible PCI cards. It will not work
- with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
- support" below). If you have a PCI NE2000 network (Ethernet) card,
- say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver also works for the following NE2000 clone cards:
- RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
- NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
- Holtek HT80232 Holtek HT80229
-
- To compile this driver as a module, choose M here. The module
- will be called ne2k-pci.
-
-config NE3210
- tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Note that this driver
- will NOT WORK for NE3200 cards as they are completely different.
-
- To compile this driver as a module, choose M here. The module
- will be called ne3210.
-
-config ES3210
- tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called es3210.
-
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
@@ -1717,33 +912,6 @@
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
-config EPIC100
- tristate "SMC EtherPower II"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
- which is based on the SMC83c17x (EPIC/100).
- More specific information and updates are available from
- <http://www.scyld.com/network/epic100.html>.
-
-config SMSC9420
- tristate "SMSC LAN9420 PCI ethernet adapter support"
- depends on NET_PCI && PCI
- select CRC32
- select PHYLIB
- select SMSC_PHY
- help
- This is a driver for SMSC's LAN9420 PCI ethernet adapter.
- Say Y if you want it compiled into the kernel,
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver is also available as a module. The module will be
- called smsc9420. If you want to compile it as a module, say M
- here and read <file:Documentation/kbuild/modules.txt>
-
config SUNDANCE
tristate "Sundance Alta support"
depends on NET_PCI && PCI
@@ -1925,15 +1093,6 @@
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
-config DECLANCE
- tristate "DEC LANCE ethernet controller support"
- depends on MACH_DECSTATION
- select CRC32
- help
- This driver is for the series of Ethernet controllers produced by
- DEC (now Compaq) based on the AMD Lance chipset, including the
- DEPCA series. (This chipset is better known via the NE2100 cards.)
-
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
@@ -1967,13 +1126,6 @@
If not sure, enable.
If compiled as module, it will be called fec_mpc52xx_phy.
-config NE_H8300
- tristate "NE2000 compatible support for H8/300"
- depends on H8300
- help
- Say Y here if you want to use the NE2000 compatible
- controller on the Renesas H8/300 processor.
-
config ATL2
tristate "Atheros L2 Fast Ethernet support"
depends on PCI
@@ -1992,15 +1144,6 @@
help
This driver supports the 10/100 Ethernet Lite from Xilinx.
-config BCM63XX_ENET
- tristate "Broadcom 63xx internal mac support"
- depends on BCM63XX
- select MII
- select PHYLIB
- help
- This driver supports the ethernet MACs in the Broadcom 63xx
- MIPS chipset family (BCM63XX).
-
config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM
@@ -2044,33 +1187,6 @@
if NETDEV_1000
-config ACENIC
- tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
- depends on PCI
- ---help---
- Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
- GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
- adapter. The driver allows for using the Jumbo Frame option (9000
- bytes/frame) however it requires that your switches can handle this
- as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
- line.
-
- To compile this driver as a module, choose M here: the
- module will be called acenic.
-
-config ACENIC_OMIT_TIGON_I
- bool "Omit support for old Tigon I based AceNICs"
- depends on ACENIC
- help
- Say Y here if you only have Tigon II based AceNICs and want to leave
- out support for the older Tigon I based cards which are no longer
- being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
- version)). This will reduce the size of the driver object by
- app. 100KB. If you are not sure whether your card is a Tigon I or a
- Tigon II, say N here.
-
- The safe and default value for this is N.
-
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
@@ -2085,47 +1201,6 @@
To compile this driver as a module, choose M here: the
module will be called dl2k.
-config E1000
- tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) PRO/1000 gigabit ethernet family of
- adapters. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called e1000.
-
-config E1000E
- tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
- depends on PCI && (!SPARC32 || BROKEN)
- select CRC32
- ---help---
- This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
- ethernet family of adapters. For PCI or PCI-X e1000 adapters,
- use the regular e1000 driver For more information on how to
- identify your adapter, go to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- To compile this driver as a module, choose M here. The module
- will be called e1000e.
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
@@ -2136,57 +1211,6 @@
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
-config IGB
- tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) 82575/82576 gigabit ethernet family of
- adapters. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called igb.
-
-config IGB_DCA
- bool "Direct Cache Access (DCA) Support"
- default y
- depends on IGB && DCA && !(IGB=y && DCA=m)
- ---help---
- Say Y here if you want to use Direct Cache Access (DCA) in the
- driver. DCA is a method for warming the CPU cache before data
- is used, with the intent of lessening the impact of cache misses.
-
-config IGBVF
- tristate "Intel(R) 82576 Virtual Function Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) 82576 virtual functions. For more
- information on how to identify your adapter, go to the Adapter &
- Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called igbvf.
-
source "drivers/net/ixp2000/Kconfig"
config NS83820
@@ -2237,19 +1261,6 @@
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
-config SB1250_MAC
- tristate "SB1250 Gigabit Ethernet support"
- depends on SIBYTE_SB1xxx_SOC
- select PHYLIB
- ---help---
- This driver supports Gigabit Ethernet interfaces based on the
- Broadcom SiByte family of System-On-a-Chip parts. They include
- the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
- and BCM1480 chips.
-
- To compile this driver as a module, choose M here: the module
- will be called sb1250-mac.
-
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
@@ -2343,39 +1354,6 @@
To compile this driver as a module, choose M here. The module
will be called via-velocity.
-config TIGON3
- tristate "Broadcom Tigon3 support"
- depends on PCI
- select PHYLIB
- help
- This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called tg3. This is recommended.
-
-config BNX2
- tristate "Broadcom NetXtremeII support"
- depends on PCI
- select CRC32
- select FW_LOADER
- help
- This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called bnx2. This is recommended.
-
-config CNIC
- tristate "Broadcom CNIC support"
- depends on PCI
- select BNX2
- select UIO
- help
- This driver supports offload features of Broadcom NetXtremeII
- gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called cnic. This is recommended.
-
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
@@ -2466,15 +1444,6 @@
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
-config QLA3XXX
- tristate "QLogic QLA3XXX Network Driver Support"
- depends on PCI
- help
- This driver supports QLogic ISP3XXX gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called qla3xxx.
-
config ATL1
tristate "Atheros/Attansic L1 Gigabit Ethernet support"
depends on PCI
@@ -2583,92 +1552,6 @@
config MDIO
tristate
-config CHELSIO_T1
- tristate "Chelsio 10Gb Ethernet support"
- depends on PCI
- select CRC32
- select MDIO
- help
- This driver supports Chelsio gigabit and 10-gigabit
- Ethernet cards. More information about adapter features and
- performance tuning is in <file:Documentation/networking/cxgb.txt>.
-
- For general information about Chelsio and our products, visit
- our website at <http://www.chelsio.com>.
-
- For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.html>.
-
- Please send feedback to <linux-bugs@chelsio.com>.
-
- To compile this driver as a module, choose M here: the module
- will be called cxgb.
-
-config CHELSIO_T1_1G
- bool "Chelsio gigabit Ethernet support"
- depends on CHELSIO_T1
- help
- Enables support for Chelsio's gigabit Ethernet PCI cards. If you
- are using only 10G cards say 'N' here.
-
-config CHELSIO_T3
- tristate "Chelsio Communications T3 10Gb Ethernet support"
- depends on PCI && INET
- select FW_LOADER
- select MDIO
- help
- This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
- adapters.
-
- For general information about Chelsio and our products, visit
- our website at <http://www.chelsio.com>.
-
- For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.html>.
-
- Please send feedback to <linux-bugs@chelsio.com>.
-
- To compile this driver as a module, choose M here: the module
- will be called cxgb3.
-
-config CHELSIO_T4
- tristate "Chelsio Communications T4 Ethernet support"
- depends on PCI
- select FW_LOADER
- select MDIO
- help
- This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
- adapters.
-
- For general information about Chelsio and our products, visit
- our website at <http://www.chelsio.com>.
-
- For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.html>.
-
- Please send feedback to <linux-bugs@chelsio.com>.
-
- To compile this driver as a module choose M here; the module
- will be called cxgb4.
-
-config CHELSIO_T4VF
- tristate "Chelsio Communications T4 Virtual Function Ethernet support"
- depends on PCI
- help
- This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
- adapters with PCI-E SR-IOV Virtual Functions.
-
- For general information about Chelsio and our products, visit
- our website at <http://www.chelsio.com>.
-
- For customer support, please visit our customer support page at
- <http://www.chelsio.com/support.html>.
-
- Please send feedback to <linux-bugs@chelsio.com>.
-
- To compile this driver as a module choose M here; the module
- will be called cxgb4vf.
-
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && INET && SPARSEMEM
@@ -2685,88 +1568,6 @@
help
This enables the support for the Cisco VIC Ethernet card.
-config IXGBE
- tristate "Intel(R) 10GbE PCI Express adapters support"
- depends on PCI && INET
- select MDIO
- ---help---
- This driver supports Intel(R) 10GbE PCI Express family of
- adapters. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- To compile this driver as a module, choose M here. The module
- will be called ixgbe.
-
-config IXGBE_DCA
- bool "Direct Cache Access (DCA) Support"
- default y
- depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
- ---help---
- Say Y here if you want to use Direct Cache Access (DCA) in the
- driver. DCA is a method for warming the CPU cache before data
- is used, with the intent of lessening the impact of cache misses.
-
-config IXGBE_DCB
- bool "Data Center Bridging (DCB) Support"
- default n
- depends on IXGBE && DCB
- ---help---
- Say Y here if you want to use Data Center Bridging (DCB) in the
- driver.
-
- If unsure, say N.
-
-config IXGBEVF
- tristate "Intel(R) 82599 Virtual Function Ethernet support"
- depends on PCI_MSI
- ---help---
- This driver supports Intel(R) 82599 virtual functions. For more
- information on how to identify your adapter, go to the Adapter &
- Driver ID Guide at:
-
- <http://support.intel.com/support/network/sb/CS-008441.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/ixgbevf.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called ixgbevf. MSI-X interrupt support is required
- for this driver to work correctly.
-
-config IXGB
- tristate "Intel(R) PRO/10GbE support"
- depends on PCI
- ---help---
- This driver supports Intel(R) PRO/10GbE family of adapters for
- PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
- instead. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/ixgb.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called ixgb.
-
config S2IO
tristate "Exar Xframe 10Gb Ethernet Adapter"
depends on PCI
@@ -2827,13 +1628,6 @@
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
-config NETXEN_NIC
- tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
- depends on PCI
- select FW_LOADER
- help
- This enables the support for NetXen's Gigabit Ethernet card.
-
config NIU
tristate "Sun Neptune 10Gbit Ethernet support"
depends on PCI
@@ -2881,35 +1675,6 @@
help
Tehuti Networks 10G Ethernet NIC
-config BNX2X
- tristate "Broadcom NetXtremeII 10Gb support"
- depends on PCI
- select FW_LOADER
- select ZLIB_INFLATE
- select LIBCRC32C
- select MDIO
- help
- This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
- To compile this driver as a module, choose M here: the module
- will be called bnx2x. This is recommended.
-
-config QLCNIC
- tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
- depends on PCI
- select FW_LOADER
- help
- This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
- devices.
-
-config QLGE
- tristate "QLogic QLGE 10Gb Ethernet Driver Support"
- depends on PCI
- help
- This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called qlge.
-
config BNA
tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e1eca2a..49b3e87 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -1,5 +1,5 @@
#
-# Makefile for the Linux network (ethercard) device drivers.
+# Makefile for the Linux network device drivers.
#
obj-$(CONFIG_MII) += mii.o
@@ -10,19 +10,8 @@
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-obj-$(CONFIG_E1000) += e1000/
-obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
-obj-$(CONFIG_IGB) += igb/
-obj-$(CONFIG_IGBVF) += igbvf/
-obj-$(CONFIG_IXGBE) += ixgbe/
-obj-$(CONFIG_IXGBEVF) += ixgbevf/
-obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
-obj-$(CONFIG_CHELSIO_T1) += chelsio/
-obj-$(CONFIG_CHELSIO_T3) += cxgb3/
-obj-$(CONFIG_CHELSIO_T4) += cxgb4/
-obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
@@ -56,7 +45,6 @@
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-obj-$(CONFIG_SUNLANCE) += sunlance.o
obj-$(CONFIG_SUNQE) += sunqe.o
obj-$(CONFIG_SUNBMAC) += sunbmac.o
obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
@@ -66,28 +54,15 @@
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
-obj-$(CONFIG_VORTEX) += 3c59x.o
-obj-$(CONFIG_TYPHOON) += typhoon.o
-obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_PCNET32) += pcnet32.o
-obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_EPIC100) += epic100.o
-obj-$(CONFIG_SMSC9420) += smsc9420.o
obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_ACENIC) += acenic.o
obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_NS83820) += ns83820.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_FEALNX) += fealnx.o
-obj-$(CONFIG_TIGON3) += tg3.o
-obj-$(CONFIG_BNX2) += bnx2.o
-obj-$(CONFIG_CNIC) += cnic.o
-obj-$(CONFIG_BNX2X) += bnx2x/
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
@@ -117,35 +92,13 @@
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o
-obj-$(CONFIG_APNE) += apne.o 8390.o
-obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_HP100) += hp100.o
-obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
endif
-obj-$(CONFIG_WD80x3) += wd.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_NE2000) += ne.o 8390p.o
-obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
-obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
-obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_ES3210) += es3210.o 8390.o
-obj-$(CONFIG_LNE390) += lne390.o 8390.o
-obj-$(CONFIG_NE3210) += ne3210.o 8390.o
-obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
-obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o
-obj-$(CONFIG_AX88796) += ax88796.o
-obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
@@ -154,9 +107,6 @@
ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-obj-$(CONFIG_QLA3XXX) += qla3xxx.o
-obj-$(CONFIG_QLCNIC) += qlcnic/
-obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
@@ -180,59 +130,25 @@
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DE600) += de600.o
obj-$(CONFIG_DE620) += de620.o
-obj-$(CONFIG_LANCE) += lance.o
-obj-$(CONFIG_SUN3_82586) += sun3_82586.o
-obj-$(CONFIG_SUN3LANCE) += sun3lance.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_EL1) += 3c501.o
-obj-$(CONFIG_EL16) += 3c507.o
-obj-$(CONFIG_ELMC) += 3c523.o
obj-$(CONFIG_IBMLANA) += ibmlana.o
-obj-$(CONFIG_ELMC_II) += 3c527.o
-obj-$(CONFIG_EL3) += 3c509.o
-obj-$(CONFIG_3C515) += 3c515.o
-obj-$(CONFIG_EEXPRESS) += eexpress.o
-obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
-obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_CPMAC) += cpmac.o
-obj-$(CONFIG_DEPCA) += depca.o
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_NI5010) += ni5010.o
-obj-$(CONFIG_NI52) += ni52.o
-obj-$(CONFIG_NI65) += ni65.o
-obj-$(CONFIG_ELPLUS) += 3c505.o
-obj-$(CONFIG_AC3200) += ac3200.o 8390.o
-obj-$(CONFIG_APRICOT) += 82596.o
-obj-$(CONFIG_LASI_82596) += lasi_82596.o
-obj-$(CONFIG_SNI_82596) += sni_82596.o
-obj-$(CONFIG_MVME16x_NET) += 82596.o
-obj-$(CONFIG_BVME6000_NET) += 82596.o
obj-$(CONFIG_SC92031) += sc92031.o
-# This is also a 82596 and should probably be merged
-obj-$(CONFIG_LP486E) += lp486e.o
-
obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o
-obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
-obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
-obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_DECLANCE) += declance.o
-obj-$(CONFIG_ATARILANCE) += atarilance.o
-obj-$(CONFIG_A2065) += a2065.o
-obj-$(CONFIG_HYDRA) += hydra.o
-obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
obj-$(CONFIG_MACMACE) += macmace.o
@@ -242,14 +158,10 @@
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_VXGE) += vxge/
obj-$(CONFIG_MYRI10GE) += myri10ge/
-obj-$(CONFIG_SMC91X) += smc91x.o
-obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_SMSC911X) += smsc911x.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
@@ -269,6 +181,7 @@
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
@@ -295,7 +208,6 @@
obj-$(CONFIG_FS_ENET) += fs_enet/
-obj-$(CONFIG_NETXEN_NIC) += netxen/
obj-$(CONFIG_NIU) += niu.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_SFC) += sfc/
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 39e1c0d..7848b5f 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -2,20 +2,6 @@
# Acorn Network device configuration
# These are for Acorn's Expansion card network interfaces
#
-config ARM_AM79C961A
- bool "ARM EBSA110 AM79C961A support"
- depends on ARM && ARCH_EBSA110
- select CRC32
- help
- If you wish to compile a kernel for the EBSA-110, then you should
- always answer Y to this.
-
-config ARM_ETHER1
- tristate "Acorn Ether1 support"
- depends on ARM && ARCH_ACORN
- help
- If you have an Acorn system with one of these (AKA25) network cards,
- you should say Y to this option if you wish to use it with Linux.
config ARM_ETHER3
tristate "Acorn/ANT Ether3 support"
@@ -24,14 +10,6 @@
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
-config ARM_ETHERH
- tristate "I-cubed EtherH/ANT EtherM support"
- depends on ARM && ARCH_ACORN
- select CRC32
- help
- If you have an Acorn system with one of these network cards, you
- should say Y to this option if you wish to use it with Linux.
-
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on ARM && ARCH_AT91RM9200
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 303171f..6cca728 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -3,10 +3,7 @@
# Makefile for the ARM network device drivers
#
-obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
-obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
-obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
diff --git a/drivers/net/3c501.c b/drivers/net/ethernet/3com/3c501.c
similarity index 100%
rename from drivers/net/3c501.c
rename to drivers/net/ethernet/3com/3c501.c
diff --git a/drivers/net/3c501.h b/drivers/net/ethernet/3com/3c501.h
similarity index 100%
rename from drivers/net/3c501.h
rename to drivers/net/ethernet/3com/3c501.h
diff --git a/drivers/net/3c509.c b/drivers/net/ethernet/3com/3c509.c
similarity index 100%
rename from drivers/net/3c509.c
rename to drivers/net/ethernet/3com/3c509.c
diff --git a/drivers/net/3c515.c b/drivers/net/ethernet/3com/3c515.c
similarity index 100%
rename from drivers/net/3c515.c
rename to drivers/net/ethernet/3com/3c515.c
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c
similarity index 100%
rename from drivers/net/pcmcia/3c574_cs.c
rename to drivers/net/ethernet/3com/3c574_cs.c
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
similarity index 100%
rename from drivers/net/pcmcia/3c589_cs.c
rename to drivers/net/ethernet/3com/3c589_cs.c
diff --git a/drivers/net/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
similarity index 100%
rename from drivers/net/3c59x.c
rename to drivers/net/ethernet/3com/3c59x.c
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
new file mode 100644
index 0000000..497f038
--- /dev/null
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -0,0 +1,147 @@
+#
+# 3Com Ethernet device configuration
+#
+
+config NET_VENDOR_3COM
+ bool "3Com devices"
+ depends on ISA || EISA || MCA || PCI || PCMCIA
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about 3Com cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_3COM
+
+config EL1
+ tristate "3c501 \"EtherLink\" support"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Also, consider buying a
+ new card, since the 3c501 is slow, broken, and obsolete: you will
+ have problems. Some people suggest to ping ("man ping") a nearby
+ machine every minute ("man cron") when using this card.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c501.
+
+config EL3
+ tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+ depends on (ISA || EISA || MCA)
+ ---help---
+ If you have a network (Ethernet) card belonging to the 3Com
+ EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+ from <http://www.tldp.org/docs.html#howto>.
+
+ If your card is not working you may need to use the DOS
+ setup disk to disable Plug & Play mode, and to select the default
+ media type.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c509.
+
+config 3C515
+ tristate "3c515 ISA \"Fast EtherLink\""
+ depends on (ISA || EISA) && ISA_DMA_API
+ ---help---
+ If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+ network card, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c515.
+
+config PCMCIA_3C574
+ tristate "3Com 3c574 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+ (PC-card) Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c574_cs. If unsure, say N.
+
+config PCMCIA_3C589
+ tristate "3Com 3c589 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+ (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c589_cs. If unsure, say N.
+
+config VORTEX
+ tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+ depends on (PCI || EISA)
+ select MII
+ ---help---
+ This option enables driver support for a large number of 10Mbps and
+ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
+
+ "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+ "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
+ "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
+ "Tornado" (3c905) PCI
+ "Hurricane" (3c555/3cSOHO) PCI
+
+ If you have such a card, say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>. More
+ specific information is in
+ <file:Documentation/networking/vortex.txt> and in the comments at
+ the beginning of <file:drivers/net/3c59x.c>.
+
+ To compile this support as a module, choose M here.
+
+config TYPHOON
+ tristate "3cr990 series \"Typhoon\" support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This option enables driver support for the 3cr990 series of cards:
+
+ 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+ 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+ 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called typhoon.
+
+config ACENIC
+ tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
+ depends on PCI
+ ---help---
+ Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
+ GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
+ adapter. The driver allows for using the Jumbo Frame option (9000
+ bytes/frame) however it requires that your switches can handle this
+ as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
+ line.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acenic.
+
+config ACENIC_OMIT_TIGON_I
+ bool "Omit support for old Tigon I based AceNICs"
+ depends on ACENIC
+ ---help---
+ Say Y here if you only have Tigon II based AceNICs and want to leave
+ out support for the older Tigon I based cards which are no longer
+ being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
+ version)). This will reduce the size of the driver object by
+ app. 100KB. If you are not sure whether your card is a Tigon I or a
+ Tigon II, say N here.
+
+ The safe and default value for this is N.
+
+endif # NET_VENDOR_3COM
diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile
new file mode 100644
index 0000000..96d1d60
--- /dev/null
+++ b/drivers/net/ethernet/3com/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the 3Com Ethernet device drivers
+#
+
+obj-$(CONFIG_EL1) += 3c501.o
+obj-$(CONFIG_EL3) += 3c509.o
+obj-$(CONFIG_3C515) += 3c515.o
+obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
+obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
+obj-$(CONFIG_VORTEX) += 3c59x.o
+obj-$(CONFIG_ACENIC) += acenic.o
+obj-$(CONFIG_TYPHOON) += typhoon.o
diff --git a/drivers/net/acenic.c b/drivers/net/ethernet/3com/acenic.c
similarity index 100%
rename from drivers/net/acenic.c
rename to drivers/net/ethernet/3com/acenic.c
diff --git a/drivers/net/acenic.h b/drivers/net/ethernet/3com/acenic.h
similarity index 100%
rename from drivers/net/acenic.h
rename to drivers/net/ethernet/3com/acenic.h
diff --git a/drivers/net/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
similarity index 100%
rename from drivers/net/typhoon.c
rename to drivers/net/ethernet/3com/typhoon.c
diff --git a/drivers/net/typhoon.h b/drivers/net/ethernet/3com/typhoon.h
similarity index 100%
rename from drivers/net/typhoon.h
rename to drivers/net/ethernet/3com/typhoon.h
diff --git a/drivers/net/3c503.c b/drivers/net/ethernet/8390/3c503.c
similarity index 100%
rename from drivers/net/3c503.c
rename to drivers/net/ethernet/8390/3c503.c
diff --git a/drivers/net/3c503.h b/drivers/net/ethernet/8390/3c503.h
similarity index 100%
rename from drivers/net/3c503.h
rename to drivers/net/ethernet/8390/3c503.h
diff --git a/drivers/net/8390.c b/drivers/net/ethernet/8390/8390.c
similarity index 100%
rename from drivers/net/8390.c
rename to drivers/net/ethernet/8390/8390.c
diff --git a/drivers/net/8390.h b/drivers/net/ethernet/8390/8390.h
similarity index 100%
rename from drivers/net/8390.h
rename to drivers/net/ethernet/8390/8390.h
diff --git a/drivers/net/8390p.c b/drivers/net/ethernet/8390/8390p.c
similarity index 100%
rename from drivers/net/8390p.c
rename to drivers/net/ethernet/8390/8390p.c
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
new file mode 100644
index 0000000..f1b9bdd
--- /dev/null
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -0,0 +1,335 @@
+#
+# 8390 device configuration
+#
+
+config NET_VENDOR_8390
+ bool "National Semi-conductor 8390 devices"
+ depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \
+ MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \
+ ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Western Digital cards. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_VENDOR_8390
+
+config EL2
+ tristate "3c503 \"EtherLink II\" support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c503.
+
+config AC3200
+ tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
+ depends on PCI && (ISA || EISA) && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ac3200.
+
+config PCMCIA_AXNET
+ tristate "Asix AX88190 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach an Asix AX88190-based PCMCIA
+ (PC-card) Fast Ethernet card to your computer. These cards are
+ nearly NE2000 compatible but need a separate driver due to a few
+ misfeatures.
+
+ To compile this driver as a module, choose M here: the module will be
+ called axnet_cs. If unsure, say N.
+
+config AX88796
+ tristate "ASIX AX88796 NE2000 clone support"
+ depends on (ARM || MIPS || SUPERH)
+ select PHYLIB
+ select MDIO_BITBANG
+ ---help---
+ AX88796 driver, using platform bus to provide
+ chip detection and resources
+
+config AX88796_93CX6
+ bool "ASIX AX88796 external 93CX6 eeprom support"
+ depends on AX88796
+ select EEPROM_93CX6
+ ---help---
+ Select this if your platform comes with an external 93CX6 eeprom.
+
+config E2100
+ tristate "Cabletron E21xx support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e2100.
+
+config ES3210
+ tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
+ depends on PCI && EISA && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called es3210.
+
+config HPLAN_PLUS
+ tristate "HP PCLAN+ (27247B and 27252A) support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called hp-plus.
+
+config HPLAN
+ tristate "HP PCLAN (27245 and other 27xxx series) support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called hp.
+
+config HYDRA
+ tristate "Hydra support"
+ depends on ZORRO
+ select CRC32
+ ---help---
+ If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hydra.
+
+config ARM_ETHERH
+ tristate "I-cubed EtherH/ANT EtherM support"
+ depends on ARM && ARCH_ACORN
+ select CRC32
+ ---help---
+ If you have an Acorn system with one of these network cards, you
+ should say Y to this option if you wish to use it with Linux.
+
+config LNE390
+ tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
+ depends on PCI && EISA && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called lne390.
+
+config MAC8390
+ bool "Macintosh NS 8390 based ethernet cards"
+ depends on MAC
+ select CRC32
+ ---help---
+ If you want to include a driver to support Nubus or LC-PDS
+ Ethernet cards using an NS8390 chipset or its equivalent, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config NE2000
+ tristate "NE2000/NE1000 support"
+ depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
+ without a specific driver are compatible with NE2000.
+
+ If you have a PCI NE2000 card however, say N here and Y to "PCI
+ NE2000 and clone support" under "EISA, VLB, PCI and on board
+ controllers" below. If you have a NE2000 card and are running on
+ an MCA system (a bus system used on some IBM PS/2 computers and
+ laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+ below.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne.
+
+config NE2_MCA
+ tristate "NE/2 (ne2000 MCA version) support"
+ depends on MCA_LEGACY
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne2.
+
+config NE2K_PCI
+ tristate "PCI NE2000 and clones support (see help)"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver is for NE2000 compatible PCI cards. It will not work
+ with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+ support" below). If you have a PCI NE2000 network (Ethernet) card,
+ say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver also works for the following NE2000 clone cards:
+ RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
+ NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
+ Holtek HT80232 Holtek HT80229
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne2k-pci.
+
+config APNE
+ tristate "PCMCIA NE2000 support"
+ depends on AMIGA_PCMCIA
+ select CRC32
+ ---help---
+ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called apne.
+
+config NE3210
+ tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
+ depends on PCI && EISA && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that this driver
+ will NOT WORK for NE3200 cards as they are completely different.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne3210.
+
+config PCMCIA_PCNET
+ tristate "NE2000 compatible PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ ---help---
+ Say Y here if you intend to attach an NE2000 compatible PCMCIA
+ (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcnet_cs. If unsure, say N.
+
+config NE_H8300
+ tristate "NE2000 compatible support for H8/300"
+ depends on H8300
+ ---help---
+ Say Y here if you want to use the NE2000 compatible
+ controller on the Renesas H8/300 processor.
+
+config STNIC
+ tristate "National DP83902AV support"
+ depends on SUPERH
+ select CRC32
+ ---help---
+ Support for cards based on the National Semiconductor DP83902AV
+ ST-NIC Serial Network Interface Controller for Twisted Pair. This
+ is a 10Mbit/sec Ethernet controller. Product overview and specs at
+ <http://www.national.com/pf/DP/DP83902A.html>.
+
+ If unsure, say N.
+
+config ULTRAMCA
+ tristate "SMC Ultra MCA support"
+ depends on MCA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type and are running
+ an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc-mca.
+
+config ULTRA
+ tristate "SMC Ultra support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Important: There have been many reports that, with some motherboards
+ mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+ such as some BusLogic models) causes corruption problems with many
+ operating systems. The Linux smc-ultra driver has a work-around for
+ this but keep it in mind if you have such a SCSI card and have
+ problems.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc-ultra.
+
+config ULTRA32
+ tristate "SMC Ultra32 EISA support"
+ depends on EISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc-ultra32.
+
+config WD80x3
+ tristate "WD80*3 support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called wd.
+
+config ZORRO8390
+ tristate "Zorro NS8390-based Ethernet support"
+ depends on ZORRO
+ select CRC32
+ ---help---
+ This driver is for Zorro Ethernet cards using an NS8390-compatible
+ chipset, like the Village Tronic Ariadne II and the Individual
+ Computers X-Surf Ethernet cards. If you have such a card, say Y.
+ Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called zorro8390.
+
+endif # NET_VENDOR_8390
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
new file mode 100644
index 0000000..3337d7f
--- /dev/null
+++ b/drivers/net/ethernet/8390/Makefile
@@ -0,0 +1,29 @@
+#
+# Makefile for the 8390 network device drivers.
+#
+
+obj-$(CONFIG_MAC8390) += mac8390.o
+obj-$(CONFIG_AC3200) += ac3200.o 8390.o
+obj-$(CONFIG_APNE) += apne.o 8390.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
+obj-$(CONFIG_AX88796) += ax88796.o
+obj-$(CONFIG_E2100) += e2100.o 8390.o
+obj-$(CONFIG_EL2) += 3c503.o 8390p.o
+obj-$(CONFIG_ES3210) += es3210.o 8390.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
+obj-$(CONFIG_HPLAN) += hp.o 8390p.o
+obj-$(CONFIG_HYDRA) += hydra.o 8390.o
+obj-$(CONFIG_LNE390) += lne390.o 8390.o
+obj-$(CONFIG_NE2000) += ne.o 8390p.o
+obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
+obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
+obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
+obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
+obj-$(CONFIG_STNIC) += stnic.o 8390.o
+obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
+obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
+obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
+obj-$(CONFIG_WD80x3) += wd.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
diff --git a/drivers/net/ac3200.c b/drivers/net/ethernet/8390/ac3200.c
similarity index 100%
rename from drivers/net/ac3200.c
rename to drivers/net/ethernet/8390/ac3200.c
diff --git a/drivers/net/apne.c b/drivers/net/ethernet/8390/apne.c
similarity index 100%
rename from drivers/net/apne.c
rename to drivers/net/ethernet/8390/apne.c
diff --git a/drivers/net/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
similarity index 100%
rename from drivers/net/ax88796.c
rename to drivers/net/ethernet/8390/ax88796.c
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c
similarity index 99%
rename from drivers/net/pcmcia/axnet_cs.c
rename to drivers/net/ethernet/8390/axnet_cs.c
index 9953db7..3e4b926 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/ethernet/8390/axnet_cs.c
@@ -38,7 +38,7 @@
#include <linux/etherdevice.h>
#include <linux/crc32.h>
#include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
diff --git a/drivers/net/e2100.c b/drivers/net/ethernet/8390/e2100.c
similarity index 100%
rename from drivers/net/e2100.c
rename to drivers/net/ethernet/8390/e2100.c
diff --git a/drivers/net/es3210.c b/drivers/net/ethernet/8390/es3210.c
similarity index 100%
rename from drivers/net/es3210.c
rename to drivers/net/ethernet/8390/es3210.c
diff --git a/drivers/net/arm/etherh.c b/drivers/net/ethernet/8390/etherh.c
similarity index 99%
rename from drivers/net/arm/etherh.c
rename to drivers/net/ethernet/8390/etherh.c
index 03e217a..cf851fa 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/ethernet/8390/etherh.c
@@ -65,7 +65,7 @@
static char version[] __initdata =
"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
-#include "../lib8390.c"
+#include "lib8390.c"
static unsigned int net_debug = NET_DEBUG;
diff --git a/drivers/net/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
similarity index 100%
rename from drivers/net/hp-plus.c
rename to drivers/net/ethernet/8390/hp-plus.c
diff --git a/drivers/net/hp.c b/drivers/net/ethernet/8390/hp.c
similarity index 100%
rename from drivers/net/hp.c
rename to drivers/net/ethernet/8390/hp.c
diff --git a/drivers/net/hydra.c b/drivers/net/ethernet/8390/hydra.c
similarity index 100%
rename from drivers/net/hydra.c
rename to drivers/net/ethernet/8390/hydra.c
diff --git a/drivers/net/lib8390.c b/drivers/net/ethernet/8390/lib8390.c
similarity index 100%
rename from drivers/net/lib8390.c
rename to drivers/net/ethernet/8390/lib8390.c
diff --git a/drivers/net/lne390.c b/drivers/net/ethernet/8390/lne390.c
similarity index 100%
rename from drivers/net/lne390.c
rename to drivers/net/ethernet/8390/lne390.c
diff --git a/drivers/net/mac8390.c b/drivers/net/ethernet/8390/mac8390.c
similarity index 100%
rename from drivers/net/mac8390.c
rename to drivers/net/ethernet/8390/mac8390.c
diff --git a/drivers/net/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c
similarity index 100%
rename from drivers/net/ne-h8300.c
rename to drivers/net/ethernet/8390/ne-h8300.c
diff --git a/drivers/net/ne.c b/drivers/net/ethernet/8390/ne.c
similarity index 100%
rename from drivers/net/ne.c
rename to drivers/net/ethernet/8390/ne.c
diff --git a/drivers/net/ne2.c b/drivers/net/ethernet/8390/ne2.c
similarity index 100%
rename from drivers/net/ne2.c
rename to drivers/net/ethernet/8390/ne2.c
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c
similarity index 100%
rename from drivers/net/ne2k-pci.c
rename to drivers/net/ethernet/8390/ne2k-pci.c
diff --git a/drivers/net/ne3210.c b/drivers/net/ethernet/8390/ne3210.c
similarity index 100%
rename from drivers/net/ne3210.c
rename to drivers/net/ethernet/8390/ne3210.c
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c
similarity index 99%
rename from drivers/net/pcmcia/pcnet_cs.c
rename to drivers/net/ethernet/8390/pcnet_cs.c
index b4fd7c3..4010761 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/ethernet/8390/pcnet_cs.c
@@ -41,7 +41,7 @@
#include <linux/log2.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
diff --git a/drivers/net/smc-mca.c b/drivers/net/ethernet/8390/smc-mca.c
similarity index 100%
rename from drivers/net/smc-mca.c
rename to drivers/net/ethernet/8390/smc-mca.c
diff --git a/drivers/net/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c
similarity index 100%
rename from drivers/net/smc-ultra.c
rename to drivers/net/ethernet/8390/smc-ultra.c
diff --git a/drivers/net/smc-ultra32.c b/drivers/net/ethernet/8390/smc-ultra32.c
similarity index 100%
rename from drivers/net/smc-ultra32.c
rename to drivers/net/ethernet/8390/smc-ultra32.c
diff --git a/drivers/net/stnic.c b/drivers/net/ethernet/8390/stnic.c
similarity index 100%
rename from drivers/net/stnic.c
rename to drivers/net/ethernet/8390/stnic.c
diff --git a/drivers/net/wd.c b/drivers/net/ethernet/8390/wd.c
similarity index 100%
rename from drivers/net/wd.c
rename to drivers/net/ethernet/8390/wd.c
diff --git a/drivers/net/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c
similarity index 100%
rename from drivers/net/zorro8390.c
rename to drivers/net/ethernet/8390/zorro8390.c
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
new file mode 100644
index 0000000..d0a8fa8
--- /dev/null
+++ b/drivers/net/ethernet/Kconfig
@@ -0,0 +1,24 @@
+#
+# Ethernet LAN device configuration
+#
+
+menuconfig ETHERNET
+ bool "Ethernet driver support"
+ depends on NET
+ default y
+ ---help---
+ This section contains all the Ethernet device drivers.
+
+if ETHERNET
+
+source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
+source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/broadcom/Kconfig"
+source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/intel/Kconfig"
+source "drivers/net/ethernet/i825xx/Kconfig"
+source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/smsc/Kconfig"
+
+endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
new file mode 100644
index 0000000..6d3276a
--- /dev/null
+++ b/drivers/net/ethernet/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the Linux network Ethernet device drivers.
+#
+
+obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
+obj-$(CONFIG_NET_VENDOR_8390) += 8390/
+obj-$(CONFIG_NET_VENDOR_AMD) += amd/
+obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
+obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
+obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
+obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
diff --git a/drivers/net/7990.c b/drivers/net/ethernet/amd/7990.c
similarity index 100%
rename from drivers/net/7990.c
rename to drivers/net/ethernet/amd/7990.c
diff --git a/drivers/net/7990.h b/drivers/net/ethernet/amd/7990.h
similarity index 100%
rename from drivers/net/7990.h
rename to drivers/net/ethernet/amd/7990.h
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
new file mode 100644
index 0000000..0513940
--- /dev/null
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -0,0 +1,192 @@
+#
+# AMD network device configuration
+#
+
+config NET_VENDOR_AMD
+ bool "AMD devices"
+ depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
+ SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
+ (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
+ ---help---
+ If you have a network (Ethernet) chipset belonging to this class,
+ say Y.
+
+ Note that the answer to this question does not directly affect
+ the kernel: saying N will just case the configurator to skip all
+ the questions regarding AMD chipsets. If you say Y, you will be asked
+ for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_AMD
+
+config A2065
+ tristate "A2065 support"
+ depends on ZORRO
+ select CRC32
+ ---help---
+ If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called a2065.
+
+config AMD8111_ETH
+ tristate "AMD 8111 (new PCI LANCE) support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ If you have an AMD 8111-based PCI LANCE ethernet card,
+ answer Y here and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called amd8111e.
+
+config LANCE
+ tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
+ depends on ISA && ISA_DMA_API
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
+ of this type.
+
+ To compile this driver as a module, choose M here: the module
+ will be called lance. This is recommended.
+
+config PCNET32
+ tristate "AMD PCnet32 PCI support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
+ answer Y here and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called pcnet32.
+
+config ARIADNE
+ tristate "Ariadne support"
+ depends on ZORRO
+ ---help---
+ If you have a Village Tronic Ariadne Ethernet adapter, say Y.
+ Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ariadne.
+
+config ARM_AM79C961A
+ bool "ARM EBSA110 AM79C961A support"
+ depends on ARM && ARCH_EBSA110
+ select CRC32
+ ---help---
+ If you wish to compile a kernel for the EBSA-110, then you should
+ always answer Y to this.
+
+config ATARILANCE
+ tristate "Atari LANCE support"
+ depends on ATARI
+ ---help---
+ Say Y to include support for several Atari Ethernet adapters based
+ on the AMD LANCE chipset: RieblCard (with or without battery), or
+ PAMCard VME (also the version by Rhotron, with different addresses).
+
+config DECLANCE
+ tristate "DEC LANCE ethernet controller support"
+ depends on MACH_DECSTATION
+ select CRC32
+ ---help---
+ This driver is for the series of Ethernet controllers produced by
+ DEC (now Compaq) based on the AMD LANCE chipset, including the
+ DEPCA series. (This chipset is better known via the NE2100 cards.)
+
+config DEPCA
+ tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+ depends on (ISA || EISA || MCA)
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto> as well as
+ <file:drivers/net/depca.c>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called depca.
+
+config HPLANCE
+ bool "HP on-board LANCE support"
+ depends on DIO
+ select CRC32
+ ---help---
+ If you want to use the builtin "LANCE" Ethernet controller on an
+ HP300 machine, say Y here.
+
+config MIPS_AU1X00_ENET
+ tristate "MIPS AU1000 Ethernet support"
+ depends on MIPS_ALCHEMY
+ select PHYLIB
+ select CRC32
+ ---help---
+ If you have an Alchemy Semi AU1X00 based system
+ say Y. Otherwise, say N.
+
+config MVME147_NET
+ tristate "MVME147 (LANCE) Ethernet support"
+ depends on MVME147
+ select CRC32
+ ---help---
+ Support for the on-board Ethernet interface on the Motorola MVME147
+ single-board computer. Say Y here to include the
+ driver for this chip in your kernel.
+ To compile this driver as a module, choose M here.
+
+config PCMCIA_NMCLAN
+ tristate "New Media PCMCIA support"
+ depends on PCMCIA
+ help
+ Say Y here if you intend to attach a New Media Ethernet or LiveWire
+ PCMCIA (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called nmclan_cs. If unsure, say N.
+
+config NI65
+ tristate "NI6510 support"
+ depends on ISA && ISA_DMA_API
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ni65.
+
+config SUN3LANCE
+ tristate "Sun3/Sun3x on-board LANCE support"
+ depends on (SUN3 || SUN3X)
+ ---help---
+ Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
+ featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
+ here to compile in the Linux driver for this and enable Ethernet.
+ General Linux information on the Sun 3 and 3x series (now
+ discontinued) is at
+ <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+ If you're not building a kernel for a Sun 3, say N.
+
+config SUNLANCE
+ tristate "Sun LANCE support"
+ depends on SBUS
+ select CRC32
+ ---help---
+ This driver supports the "le" interface present on all 32-bit Sparc
+ systems, on some older Ultra systems and as an Sbus option. These
+ cards are based on the AMD LANCE chipset, which is better known
+ via the NE2100 cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunlance.
+
+endif # NET_VENDOR_AMD
diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile
new file mode 100644
index 0000000..175caa5
--- /dev/null
+++ b/drivers/net/ethernet/amd/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the AMD network device drivers.
+#
+
+obj-$(CONFIG_A2065) += a2065.o
+obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
+obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
+obj-$(CONFIG_ARIADNE) += ariadne.o
+obj-$(CONFIG_ATARILANCE) += atarilance.o
+obj-$(CONFIG_DECLANCE) += declance.o
+obj-$(CONFIG_DEPCA) += depca.o
+obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
+obj-$(CONFIG_LANCE) += lance.o
+obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
+obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
+obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
+obj-$(CONFIG_NI65) += ni65.o
+obj-$(CONFIG_PCNET32) += pcnet32.o
+obj-$(CONFIG_SUN3LANCE) += sun3lance.o
+obj-$(CONFIG_SUNLANCE) += sunlance.o
diff --git a/drivers/net/a2065.c b/drivers/net/ethernet/amd/a2065.c
similarity index 100%
rename from drivers/net/a2065.c
rename to drivers/net/ethernet/amd/a2065.c
diff --git a/drivers/net/a2065.h b/drivers/net/ethernet/amd/a2065.h
similarity index 100%
rename from drivers/net/a2065.h
rename to drivers/net/ethernet/amd/a2065.h
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
similarity index 100%
rename from drivers/net/arm/am79c961a.c
rename to drivers/net/ethernet/amd/am79c961a.c
diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h
similarity index 100%
rename from drivers/net/arm/am79c961a.h
rename to drivers/net/ethernet/amd/am79c961a.h
diff --git a/drivers/net/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
similarity index 100%
rename from drivers/net/amd8111e.c
rename to drivers/net/ethernet/amd/amd8111e.c
diff --git a/drivers/net/amd8111e.h b/drivers/net/ethernet/amd/amd8111e.h
similarity index 100%
rename from drivers/net/amd8111e.h
rename to drivers/net/ethernet/amd/amd8111e.h
diff --git a/drivers/net/ariadne.c b/drivers/net/ethernet/amd/ariadne.c
similarity index 100%
rename from drivers/net/ariadne.c
rename to drivers/net/ethernet/amd/ariadne.c
diff --git a/drivers/net/ariadne.h b/drivers/net/ethernet/amd/ariadne.h
similarity index 100%
rename from drivers/net/ariadne.h
rename to drivers/net/ethernet/amd/ariadne.h
diff --git a/drivers/net/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
similarity index 100%
rename from drivers/net/atarilance.c
rename to drivers/net/ethernet/amd/atarilance.c
diff --git a/drivers/net/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
similarity index 100%
rename from drivers/net/au1000_eth.c
rename to drivers/net/ethernet/amd/au1000_eth.c
diff --git a/drivers/net/au1000_eth.h b/drivers/net/ethernet/amd/au1000_eth.h
similarity index 100%
rename from drivers/net/au1000_eth.h
rename to drivers/net/ethernet/amd/au1000_eth.h
diff --git a/drivers/net/declance.c b/drivers/net/ethernet/amd/declance.c
similarity index 100%
rename from drivers/net/declance.c
rename to drivers/net/ethernet/amd/declance.c
diff --git a/drivers/net/depca.c b/drivers/net/ethernet/amd/depca.c
similarity index 100%
rename from drivers/net/depca.c
rename to drivers/net/ethernet/amd/depca.c
diff --git a/drivers/net/depca.h b/drivers/net/ethernet/amd/depca.h
similarity index 100%
rename from drivers/net/depca.h
rename to drivers/net/ethernet/amd/depca.h
diff --git a/drivers/net/hplance.c b/drivers/net/ethernet/amd/hplance.c
similarity index 100%
rename from drivers/net/hplance.c
rename to drivers/net/ethernet/amd/hplance.c
diff --git a/drivers/net/hplance.h b/drivers/net/ethernet/amd/hplance.h
similarity index 100%
rename from drivers/net/hplance.h
rename to drivers/net/ethernet/amd/hplance.h
diff --git a/drivers/net/lance.c b/drivers/net/ethernet/amd/lance.c
similarity index 100%
rename from drivers/net/lance.c
rename to drivers/net/ethernet/amd/lance.c
diff --git a/drivers/net/mvme147.c b/drivers/net/ethernet/amd/mvme147.c
similarity index 100%
rename from drivers/net/mvme147.c
rename to drivers/net/ethernet/amd/mvme147.c
diff --git a/drivers/net/ni65.c b/drivers/net/ethernet/amd/ni65.c
similarity index 100%
rename from drivers/net/ni65.c
rename to drivers/net/ethernet/amd/ni65.c
diff --git a/drivers/net/ni65.h b/drivers/net/ethernet/amd/ni65.h
similarity index 100%
rename from drivers/net/ni65.h
rename to drivers/net/ethernet/amd/ni65.h
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c
similarity index 100%
rename from drivers/net/pcmcia/nmclan_cs.c
rename to drivers/net/ethernet/amd/nmclan_cs.c
diff --git a/drivers/net/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
similarity index 100%
rename from drivers/net/pcnet32.c
rename to drivers/net/ethernet/amd/pcnet32.c
diff --git a/drivers/net/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c
similarity index 100%
rename from drivers/net/sun3lance.c
rename to drivers/net/ethernet/amd/sun3lance.c
diff --git a/drivers/net/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
similarity index 100%
rename from drivers/net/sunlance.c
rename to drivers/net/ethernet/amd/sunlance.c
diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig
new file mode 100644
index 0000000..8986e57
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -0,0 +1,119 @@
+#
+# Broadcom device configuration
+#
+
+config NET_VENDOR_BROADCOM
+ bool "Broadcom devices"
+ depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
+ SIBYTE_SB1xxx_SOC
+ ---help---
+ If you have a network (Ethernet) chipset belonging to this class,
+ say Y.
+
+ Note that the answer to this question does not directly affect
+ the kernel: saying N will just case the configurator to skip all
+ the questions regarding AMD chipsets. If you say Y, you will be asked
+ for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_BROADCOM
+
+config B44
+ tristate "Broadcom 440x/47xx ethernet support"
+ depends on SSB_POSSIBLE && HAS_DMA
+ select SSB
+ select MII
+ ---help---
+ If you have a network (Ethernet) controller of this type, say Y
+ or M and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called b44.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B44_PCI_AUTOSELECT
+ bool
+ depends on B44 && SSB_PCIHOST_POSSIBLE
+ select SSB_PCIHOST
+ default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B44_PCICORE_AUTOSELECT
+ bool
+ depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
+ select SSB_DRIVER_PCICORE
+ default y
+
+config B44_PCI
+ bool
+ depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+ default y
+
+config BCM63XX_ENET
+ tristate "Broadcom 63xx internal mac support"
+ depends on BCM63XX
+ select MII
+ select PHYLIB
+ help
+ This driver supports the ethernet MACs in the Broadcom 63xx
+ MIPS chipset family (BCM63XX).
+
+config BNX2
+ tristate "Broadcom NetXtremeII support"
+ depends on PCI
+ select CRC32
+ select FW_LOADER
+ ---help---
+ This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bnx2. This is recommended.
+
+config CNIC
+ tristate "Broadcom CNIC support"
+ depends on PCI
+ select BNX2
+ select UIO
+ ---help---
+ This driver supports offload features of Broadcom NetXtremeII
+ gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cnic. This is recommended.
+
+config SB1250_MAC
+ tristate "SB1250 Gigabit Ethernet support"
+ depends on SIBYTE_SB1xxx_SOC
+ select PHYLIB
+ ---help---
+ This driver supports Gigabit Ethernet interfaces based on the
+ Broadcom SiByte family of System-On-a-Chip parts. They include
+ the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+ and BCM1480 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sb1250-mac.
+
+config TIGON3
+ tristate "Broadcom Tigon3 support"
+ depends on PCI
+ select PHYLIB
+ ---help---
+ This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called tg3. This is recommended.
+
+config BNX2X
+ tristate "Broadcom NetXtremeII 10Gb support"
+ depends on PCI
+ select FW_LOADER
+ select ZLIB_INFLATE
+ select LIBCRC32C
+ select MDIO
+ ---help---
+ This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
+ To compile this driver as a module, choose M here: the module
+ will be called bnx2x. This is recommended.
+
+endif # NET_VENDOR_BROADCOM
diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile
new file mode 100644
index 0000000..b789605
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Broadcom network device drivers.
+#
+
+obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
+obj-$(CONFIG_BNX2X) += bnx2x/
+obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+obj-$(CONFIG_TIGON3) += tg3.o
diff --git a/drivers/net/b44.c b/drivers/net/ethernet/broadcom/b44.c
similarity index 100%
rename from drivers/net/b44.c
rename to drivers/net/ethernet/broadcom/b44.c
diff --git a/drivers/net/b44.h b/drivers/net/ethernet/broadcom/b44.h
similarity index 100%
rename from drivers/net/b44.h
rename to drivers/net/ethernet/broadcom/b44.h
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
similarity index 100%
rename from drivers/net/bcm63xx_enet.c
rename to drivers/net/ethernet/broadcom/bcm63xx_enet.c
diff --git a/drivers/net/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
similarity index 100%
rename from drivers/net/bcm63xx_enet.h
rename to drivers/net/ethernet/broadcom/bcm63xx_enet.h
diff --git a/drivers/net/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
similarity index 100%
rename from drivers/net/bnx2.c
rename to drivers/net/ethernet/broadcom/bnx2.c
diff --git a/drivers/net/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h
similarity index 100%
rename from drivers/net/bnx2.h
rename to drivers/net/ethernet/broadcom/bnx2.h
diff --git a/drivers/net/bnx2_fw.h b/drivers/net/ethernet/broadcom/bnx2_fw.h
similarity index 100%
rename from drivers/net/bnx2_fw.h
rename to drivers/net/ethernet/broadcom/bnx2_fw.h
diff --git a/drivers/net/bnx2x/Makefile b/drivers/net/ethernet/broadcom/bnx2x/Makefile
similarity index 100%
rename from drivers/net/bnx2x/Makefile
rename to drivers/net/ethernet/broadcom/bnx2x/Makefile
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_cmn.c
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_cmn.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_dcb.c
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
diff --git a/drivers/net/bnx2x/bnx2x_dcb.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_dcb.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
diff --git a/drivers/net/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_dump.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_ethtool.c
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
diff --git a/drivers/net/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_fw_defs.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
diff --git a/drivers/net/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_fw_file_hdr.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_hsi.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
diff --git a/drivers/net/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_init.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
diff --git a/drivers/net/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_init_ops.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_link.c
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_link.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_main.c
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_reg.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
diff --git a/drivers/net/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_sp.c
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
diff --git a/drivers/net/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_sp.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_stats.c
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
diff --git a/drivers/net/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
similarity index 100%
rename from drivers/net/bnx2x/bnx2x_stats.h
rename to drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
diff --git a/drivers/net/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
similarity index 99%
rename from drivers/net/cnic.c
rename to drivers/net/ethernet/broadcom/cnic.c
index 94a2e54..7698161 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -45,8 +45,8 @@
#include "bnx2x/bnx2x_reg.h"
#include "bnx2x/bnx2x_fw_defs.h"
#include "bnx2x/bnx2x_hsi.h"
-#include "../scsi/bnx2i/57xx_iscsi_constants.h"
-#include "../scsi/bnx2i/57xx_iscsi_hsi.h"
+#include "../../../scsi/bnx2i/57xx_iscsi_constants.h"
+#include "../../../scsi/bnx2i/57xx_iscsi_hsi.h"
#include "cnic.h"
#include "cnic_defs.h"
diff --git a/drivers/net/cnic.h b/drivers/net/ethernet/broadcom/cnic.h
similarity index 100%
rename from drivers/net/cnic.h
rename to drivers/net/ethernet/broadcom/cnic.h
diff --git a/drivers/net/cnic_defs.h b/drivers/net/ethernet/broadcom/cnic_defs.h
similarity index 100%
rename from drivers/net/cnic_defs.h
rename to drivers/net/ethernet/broadcom/cnic_defs.h
diff --git a/drivers/net/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h
similarity index 100%
rename from drivers/net/cnic_if.h
rename to drivers/net/ethernet/broadcom/cnic_if.h
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
similarity index 100%
rename from drivers/net/sb1250-mac.c
rename to drivers/net/ethernet/broadcom/sb1250-mac.c
diff --git a/drivers/net/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
similarity index 100%
rename from drivers/net/tg3.c
rename to drivers/net/ethernet/broadcom/tg3.c
diff --git a/drivers/net/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
similarity index 100%
rename from drivers/net/tg3.h
rename to drivers/net/ethernet/broadcom/tg3.h
diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig
new file mode 100644
index 0000000..7b54574
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/Kconfig
@@ -0,0 +1,106 @@
+#
+# Chelsio device configuration
+#
+
+config NET_VENDOR_CHELSIO
+ bool "Chelsio devices"
+ depends on PCI || INET
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Chelsio devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_CHELSIO
+
+config CHELSIO_T1
+ tristate "Chelsio 10Gb Ethernet support"
+ depends on PCI
+ select CRC32
+ select MDIO
+ ---help---
+ This driver supports Chelsio gigabit and 10-gigabit
+ Ethernet cards. More information about adapter features and
+ performance tuning is in <file:Documentation/networking/cxgb.txt>.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.html>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb.
+
+config CHELSIO_T1_1G
+ bool "Chelsio gigabit Ethernet support"
+ depends on CHELSIO_T1
+ ---help---
+ Enables support for Chelsio's gigabit Ethernet PCI cards. If you
+ are using only 10G cards say 'N' here.
+
+config CHELSIO_T3
+ tristate "Chelsio Communications T3 10Gb Ethernet support"
+ depends on PCI && INET
+ select FW_LOADER
+ select MDIO
+ ---help---
+ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+ adapters.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.html>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb3.
+
+config CHELSIO_T4
+ tristate "Chelsio Communications T4 Ethernet support"
+ depends on PCI
+ select FW_LOADER
+ select MDIO
+ ---help---
+ This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+ adapters.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.html>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module choose M here; the module
+ will be called cxgb4.
+
+config CHELSIO_T4VF
+ tristate "Chelsio Communications T4 Virtual Function Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+ adapters with PCI-E SR-IOV Virtual Functions.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.html>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module choose M here; the module
+ will be called cxgb4vf.
+
+endif # NET_VENDOR_CHELSIO
diff --git a/drivers/net/ethernet/chelsio/Makefile b/drivers/net/ethernet/chelsio/Makefile
new file mode 100644
index 0000000..390510b
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Chelsio network device drivers.
+#
+
+obj-$(CONFIG_CHELSIO_T1) += cxgb/
+obj-$(CONFIG_CHELSIO_T3) += cxgb3/
+obj-$(CONFIG_CHELSIO_T4) += cxgb4/
+obj-$(CONFIG_CHELSIO_T4VF) += cxgb4vf/
diff --git a/drivers/net/chelsio/Makefile b/drivers/net/ethernet/chelsio/cxgb/Makefile
similarity index 100%
rename from drivers/net/chelsio/Makefile
rename to drivers/net/ethernet/chelsio/cxgb/Makefile
diff --git a/drivers/net/chelsio/common.h b/drivers/net/ethernet/chelsio/cxgb/common.h
similarity index 100%
rename from drivers/net/chelsio/common.h
rename to drivers/net/ethernet/chelsio/cxgb/common.h
diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/ethernet/chelsio/cxgb/cphy.h
similarity index 100%
rename from drivers/net/chelsio/cphy.h
rename to drivers/net/ethernet/chelsio/cxgb/cphy.h
diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/ethernet/chelsio/cxgb/cpl5_cmd.h
similarity index 100%
rename from drivers/net/chelsio/cpl5_cmd.h
rename to drivers/net/ethernet/chelsio/cxgb/cpl5_cmd.h
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
similarity index 100%
rename from drivers/net/chelsio/cxgb2.c
rename to drivers/net/ethernet/chelsio/cxgb/cxgb2.c
diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/ethernet/chelsio/cxgb/elmer0.h
similarity index 100%
rename from drivers/net/chelsio/elmer0.h
rename to drivers/net/ethernet/chelsio/cxgb/elmer0.h
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/ethernet/chelsio/cxgb/espi.c
similarity index 100%
rename from drivers/net/chelsio/espi.c
rename to drivers/net/ethernet/chelsio/cxgb/espi.c
diff --git a/drivers/net/chelsio/espi.h b/drivers/net/ethernet/chelsio/cxgb/espi.h
similarity index 100%
rename from drivers/net/chelsio/espi.h
rename to drivers/net/ethernet/chelsio/cxgb/espi.h
diff --git a/drivers/net/chelsio/fpga_defs.h b/drivers/net/ethernet/chelsio/cxgb/fpga_defs.h
similarity index 100%
rename from drivers/net/chelsio/fpga_defs.h
rename to drivers/net/ethernet/chelsio/cxgb/fpga_defs.h
diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/ethernet/chelsio/cxgb/gmac.h
similarity index 100%
rename from drivers/net/chelsio/gmac.h
rename to drivers/net/ethernet/chelsio/cxgb/gmac.h
diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c
similarity index 100%
rename from drivers/net/chelsio/mv88e1xxx.c
rename to drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c
diff --git a/drivers/net/chelsio/mv88e1xxx.h b/drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h
similarity index 100%
rename from drivers/net/chelsio/mv88e1xxx.h
rename to drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/ethernet/chelsio/cxgb/mv88x201x.c
similarity index 100%
rename from drivers/net/chelsio/mv88x201x.c
rename to drivers/net/ethernet/chelsio/cxgb/mv88x201x.c
diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/ethernet/chelsio/cxgb/my3126.c
similarity index 100%
rename from drivers/net/chelsio/my3126.c
rename to drivers/net/ethernet/chelsio/cxgb/my3126.c
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/ethernet/chelsio/cxgb/pm3393.c
similarity index 100%
rename from drivers/net/chelsio/pm3393.c
rename to drivers/net/ethernet/chelsio/cxgb/pm3393.c
diff --git a/drivers/net/chelsio/regs.h b/drivers/net/ethernet/chelsio/cxgb/regs.h
similarity index 100%
rename from drivers/net/chelsio/regs.h
rename to drivers/net/ethernet/chelsio/cxgb/regs.h
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/ethernet/chelsio/cxgb/sge.c
similarity index 100%
rename from drivers/net/chelsio/sge.c
rename to drivers/net/ethernet/chelsio/cxgb/sge.c
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/ethernet/chelsio/cxgb/sge.h
similarity index 100%
rename from drivers/net/chelsio/sge.h
rename to drivers/net/ethernet/chelsio/cxgb/sge.h
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/ethernet/chelsio/cxgb/subr.c
similarity index 100%
rename from drivers/net/chelsio/subr.c
rename to drivers/net/ethernet/chelsio/cxgb/subr.c
diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/ethernet/chelsio/cxgb/suni1x10gexp_regs.h
similarity index 100%
rename from drivers/net/chelsio/suni1x10gexp_regs.h
rename to drivers/net/ethernet/chelsio/cxgb/suni1x10gexp_regs.h
diff --git a/drivers/net/chelsio/tp.c b/drivers/net/ethernet/chelsio/cxgb/tp.c
similarity index 100%
rename from drivers/net/chelsio/tp.c
rename to drivers/net/ethernet/chelsio/cxgb/tp.c
diff --git a/drivers/net/chelsio/tp.h b/drivers/net/ethernet/chelsio/cxgb/tp.h
similarity index 100%
rename from drivers/net/chelsio/tp.h
rename to drivers/net/ethernet/chelsio/cxgb/tp.h
diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/ethernet/chelsio/cxgb/vsc7326.c
similarity index 100%
rename from drivers/net/chelsio/vsc7326.c
rename to drivers/net/ethernet/chelsio/cxgb/vsc7326.c
diff --git a/drivers/net/chelsio/vsc7326_reg.h b/drivers/net/ethernet/chelsio/cxgb/vsc7326_reg.h
similarity index 100%
rename from drivers/net/chelsio/vsc7326_reg.h
rename to drivers/net/ethernet/chelsio/cxgb/vsc7326_reg.h
diff --git a/drivers/net/cxgb3/Makefile b/drivers/net/ethernet/chelsio/cxgb3/Makefile
similarity index 100%
rename from drivers/net/cxgb3/Makefile
rename to drivers/net/ethernet/chelsio/cxgb3/Makefile
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/ethernet/chelsio/cxgb3/adapter.h
similarity index 100%
rename from drivers/net/cxgb3/adapter.h
rename to drivers/net/ethernet/chelsio/cxgb3/adapter.h
diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/ethernet/chelsio/cxgb3/ael1002.c
similarity index 100%
rename from drivers/net/cxgb3/ael1002.c
rename to drivers/net/ethernet/chelsio/cxgb3/ael1002.c
diff --git a/drivers/net/cxgb3/aq100x.c b/drivers/net/ethernet/chelsio/cxgb3/aq100x.c
similarity index 100%
rename from drivers/net/cxgb3/aq100x.c
rename to drivers/net/ethernet/chelsio/cxgb3/aq100x.c
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/ethernet/chelsio/cxgb3/common.h
similarity index 100%
rename from drivers/net/cxgb3/common.h
rename to drivers/net/ethernet/chelsio/cxgb3/common.h
diff --git a/drivers/net/cxgb3/cxgb3_ctl_defs.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_ctl_defs.h
similarity index 100%
rename from drivers/net/cxgb3/cxgb3_ctl_defs.h
rename to drivers/net/ethernet/chelsio/cxgb3/cxgb3_ctl_defs.h
diff --git a/drivers/net/cxgb3/cxgb3_defs.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h
similarity index 100%
rename from drivers/net/cxgb3/cxgb3_defs.h
rename to drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h
diff --git a/drivers/net/cxgb3/cxgb3_ioctl.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_ioctl.h
similarity index 100%
rename from drivers/net/cxgb3/cxgb3_ioctl.h
rename to drivers/net/ethernet/chelsio/cxgb3/cxgb3_ioctl.h
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
similarity index 100%
rename from drivers/net/cxgb3/cxgb3_main.c
rename to drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
similarity index 100%
rename from drivers/net/cxgb3/cxgb3_offload.c
rename to drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
diff --git a/drivers/net/cxgb3/cxgb3_offload.h b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.h
similarity index 100%
rename from drivers/net/cxgb3/cxgb3_offload.h
rename to drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.h
diff --git a/drivers/net/cxgb3/firmware_exports.h b/drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h
similarity index 100%
rename from drivers/net/cxgb3/firmware_exports.h
rename to drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/ethernet/chelsio/cxgb3/l2t.c
similarity index 100%
rename from drivers/net/cxgb3/l2t.c
rename to drivers/net/ethernet/chelsio/cxgb3/l2t.c
diff --git a/drivers/net/cxgb3/l2t.h b/drivers/net/ethernet/chelsio/cxgb3/l2t.h
similarity index 100%
rename from drivers/net/cxgb3/l2t.h
rename to drivers/net/ethernet/chelsio/cxgb3/l2t.h
diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/ethernet/chelsio/cxgb3/mc5.c
similarity index 100%
rename from drivers/net/cxgb3/mc5.c
rename to drivers/net/ethernet/chelsio/cxgb3/mc5.c
diff --git a/drivers/net/cxgb3/regs.h b/drivers/net/ethernet/chelsio/cxgb3/regs.h
similarity index 100%
rename from drivers/net/cxgb3/regs.h
rename to drivers/net/ethernet/chelsio/cxgb3/regs.h
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
similarity index 100%
rename from drivers/net/cxgb3/sge.c
rename to drivers/net/ethernet/chelsio/cxgb3/sge.c
diff --git a/drivers/net/cxgb3/sge_defs.h b/drivers/net/ethernet/chelsio/cxgb3/sge_defs.h
similarity index 100%
rename from drivers/net/cxgb3/sge_defs.h
rename to drivers/net/ethernet/chelsio/cxgb3/sge_defs.h
diff --git a/drivers/net/cxgb3/t3_cpl.h b/drivers/net/ethernet/chelsio/cxgb3/t3_cpl.h
similarity index 100%
rename from drivers/net/cxgb3/t3_cpl.h
rename to drivers/net/ethernet/chelsio/cxgb3/t3_cpl.h
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
similarity index 100%
rename from drivers/net/cxgb3/t3_hw.c
rename to drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
diff --git a/drivers/net/cxgb3/t3cdev.h b/drivers/net/ethernet/chelsio/cxgb3/t3cdev.h
similarity index 100%
rename from drivers/net/cxgb3/t3cdev.h
rename to drivers/net/ethernet/chelsio/cxgb3/t3cdev.h
diff --git a/drivers/net/cxgb3/version.h b/drivers/net/ethernet/chelsio/cxgb3/version.h
similarity index 100%
rename from drivers/net/cxgb3/version.h
rename to drivers/net/ethernet/chelsio/cxgb3/version.h
diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/ethernet/chelsio/cxgb3/vsc8211.c
similarity index 100%
rename from drivers/net/cxgb3/vsc8211.c
rename to drivers/net/ethernet/chelsio/cxgb3/vsc8211.c
diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/ethernet/chelsio/cxgb3/xgmac.c
similarity index 100%
rename from drivers/net/cxgb3/xgmac.c
rename to drivers/net/ethernet/chelsio/cxgb3/xgmac.c
diff --git a/drivers/net/cxgb4/Makefile b/drivers/net/ethernet/chelsio/cxgb4/Makefile
similarity index 100%
rename from drivers/net/cxgb4/Makefile
rename to drivers/net/ethernet/chelsio/cxgb4/Makefile
diff --git a/drivers/net/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
similarity index 100%
rename from drivers/net/cxgb4/cxgb4.h
rename to drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
similarity index 100%
rename from drivers/net/cxgb4/cxgb4_main.c
rename to drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
diff --git a/drivers/net/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
similarity index 100%
rename from drivers/net/cxgb4/cxgb4_uld.h
rename to drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
diff --git a/drivers/net/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
similarity index 100%
rename from drivers/net/cxgb4/l2t.c
rename to drivers/net/ethernet/chelsio/cxgb4/l2t.c
diff --git a/drivers/net/cxgb4/l2t.h b/drivers/net/ethernet/chelsio/cxgb4/l2t.h
similarity index 100%
rename from drivers/net/cxgb4/l2t.h
rename to drivers/net/ethernet/chelsio/cxgb4/l2t.h
diff --git a/drivers/net/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
similarity index 100%
rename from drivers/net/cxgb4/sge.c
rename to drivers/net/ethernet/chelsio/cxgb4/sge.c
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
similarity index 100%
rename from drivers/net/cxgb4/t4_hw.c
rename to drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
diff --git a/drivers/net/cxgb4/t4_hw.h b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
similarity index 100%
rename from drivers/net/cxgb4/t4_hw.h
rename to drivers/net/ethernet/chelsio/cxgb4/t4_hw.h
diff --git a/drivers/net/cxgb4/t4_msg.h b/drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
similarity index 100%
rename from drivers/net/cxgb4/t4_msg.h
rename to drivers/net/ethernet/chelsio/cxgb4/t4_msg.h
diff --git a/drivers/net/cxgb4/t4_regs.h b/drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
similarity index 100%
rename from drivers/net/cxgb4/t4_regs.h
rename to drivers/net/ethernet/chelsio/cxgb4/t4_regs.h
diff --git a/drivers/net/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
similarity index 100%
rename from drivers/net/cxgb4/t4fw_api.h
rename to drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
diff --git a/drivers/net/cxgb4vf/Makefile b/drivers/net/ethernet/chelsio/cxgb4vf/Makefile
similarity index 100%
rename from drivers/net/cxgb4vf/Makefile
rename to drivers/net/ethernet/chelsio/cxgb4vf/Makefile
diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/ethernet/chelsio/cxgb4vf/adapter.h
similarity index 100%
rename from drivers/net/cxgb4vf/adapter.h
rename to drivers/net/ethernet/chelsio/cxgb4vf/adapter.h
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
similarity index 100%
rename from drivers/net/cxgb4vf/cxgb4vf_main.c
rename to drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c
similarity index 100%
rename from drivers/net/cxgb4vf/sge.c
rename to drivers/net/ethernet/chelsio/cxgb4vf/sge.c
diff --git a/drivers/net/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
similarity index 100%
rename from drivers/net/cxgb4vf/t4vf_common.h
rename to drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
diff --git a/drivers/net/cxgb4vf/t4vf_defs.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_defs.h
similarity index 100%
rename from drivers/net/cxgb4vf/t4vf_defs.h
rename to drivers/net/ethernet/chelsio/cxgb4vf/t4vf_defs.h
diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
similarity index 100%
rename from drivers/net/cxgb4vf/t4vf_hw.c
rename to drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c
diff --git a/drivers/net/3c505.c b/drivers/net/ethernet/i825xx/3c505.c
similarity index 100%
rename from drivers/net/3c505.c
rename to drivers/net/ethernet/i825xx/3c505.c
diff --git a/drivers/net/3c505.h b/drivers/net/ethernet/i825xx/3c505.h
similarity index 100%
rename from drivers/net/3c505.h
rename to drivers/net/ethernet/i825xx/3c505.h
diff --git a/drivers/net/3c507.c b/drivers/net/ethernet/i825xx/3c507.c
similarity index 100%
rename from drivers/net/3c507.c
rename to drivers/net/ethernet/i825xx/3c507.c
diff --git a/drivers/net/3c523.c b/drivers/net/ethernet/i825xx/3c523.c
similarity index 100%
rename from drivers/net/3c523.c
rename to drivers/net/ethernet/i825xx/3c523.c
diff --git a/drivers/net/3c523.h b/drivers/net/ethernet/i825xx/3c523.h
similarity index 100%
rename from drivers/net/3c523.h
rename to drivers/net/ethernet/i825xx/3c523.h
diff --git a/drivers/net/3c527.c b/drivers/net/ethernet/i825xx/3c527.c
similarity index 100%
rename from drivers/net/3c527.c
rename to drivers/net/ethernet/i825xx/3c527.c
diff --git a/drivers/net/3c527.h b/drivers/net/ethernet/i825xx/3c527.h
similarity index 100%
rename from drivers/net/3c527.h
rename to drivers/net/ethernet/i825xx/3c527.h
diff --git a/drivers/net/82596.c b/drivers/net/ethernet/i825xx/82596.c
similarity index 100%
rename from drivers/net/82596.c
rename to drivers/net/ethernet/i825xx/82596.c
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
new file mode 100644
index 0000000..5c30a5b
--- /dev/null
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -0,0 +1,182 @@
+#
+# Intel 82596/82593/82596 network device configuration
+#
+
+config NET_VENDOR_I825XX
+ bool "Intel (82586/82593/82596) devices"
+ depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
+ ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
+ GSC || BVME6000 || MVME16x || EXPERIMENTAL)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question does not directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about these devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_I825XX
+
+config ELPLUS
+ tristate "3c505 \"EtherLink Plus\" support"
+ depends on ISA && ISA_DMA_API
+ ---help---
+ Information about this network (Ethernet) card can be found in
+ <file:Documentation/networking/3c505.txt>. If you have a card of
+ this type, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c505.
+
+config EL16
+ tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
+ depends on ISA && EXPERIMENTAL
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c507.
+
+config ELMC
+ tristate "3c523 \"EtherLink/MC\" support"
+ depends on MCA_LEGACY
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c523.
+
+config ELMC_II
+ tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
+ depends on MCA && MCA_LEGACY
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c527.
+
+config ARM_ETHER1
+ tristate "Acorn Ether1 support"
+ depends on ARM && ARCH_ACORN
+ ---help---
+ If you have an Acorn system with one of these (AKA25) network cards,
+ you should say Y to this option if you wish to use it with Linux.
+
+config APRICOT
+ tristate "Apricot Xen-II on board Ethernet"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) controller of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called apricot.
+
+config BVME6000_NET
+ tristate "BVME6000 Ethernet support"
+ depends on BVME6000MVME16x
+ ---help---
+ This is the driver for the Ethernet interface on BVME4000 and
+ BVME6000 VME boards. Say Y here to include the driver for this chip
+ in your kernel.
+ To compile this driver as a module, choose M here.
+
+config EEXPRESS
+ tristate "EtherExpress 16 support"
+ depends on ISA
+ ---help---
+ If you have an EtherExpress16 network (Ethernet) card, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that the Intel
+ EtherExpress16 card used to be regarded as a very poor choice
+ because the driver was very unreliable. We now have a new driver
+ that should do better.
+
+ To compile this driver as a module, choose M here. The module
+ will be called eexpress.
+
+config EEXPRESS_PRO
+ tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y. This
+ driver supports Intel i82595{FX,TX} based boards. Note however
+ that the EtherExpress PRO/100 Ethernet card has its own separate
+ driver. Please read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called eepro.
+
+config LASI_82596
+ tristate "Lasi ethernet"
+ depends on GSC
+ ---help---
+ Say Y here to support the builtin Intel 82596 ethernet controller
+ found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
+
+config LP486E
+ tristate "LP486E on board Ethernet"
+ depends on ISA
+ ---help---
+ Say Y here to support the 82596-based on-board Ethernet controller
+ for the Panther motherboard, which is one of the two shipped in the
+ Intel Professional Workstation.
+
+config MVME16x_NET
+ tristate "MVME16x Ethernet support"
+ depends on MVME16x
+ ---help---
+ This is the driver for the Ethernet interface on the Motorola
+ MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
+ driver for this chip in your kernel.
+ To compile this driver as a module, choose M here.
+
+config NI52
+ tristate "NI5210 support"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ni52.
+
+config SNI_82596
+ tristate "SNI RM ethernet"
+ depends on SNI_RM
+ ---help---
+ Say Y here to support the on-board Intel 82596 ethernet controller
+ built into SNI RM machines.
+
+config SUN3_82586
+ bool "Sun3 on-board Intel 82586 support"
+ depends on SUN3
+ ---help---
+ This driver enables support for the on-board Intel 82586 based
+ Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
+ that this driver does not support 82586-based adapters on additional
+ VME boards.
+
+config ZNET
+ tristate "Zenith Z-Note support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && ISA_DMA_API
+ ---help---
+ The Zenith Z-Note notebook computer has a built-in network
+ (Ethernet) card, and this is the Linux driver for it. Note that the
+ IBM Thinkpad 300 is compatible with the Z-Note and is also supported
+ by this driver. Read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+endif # NET_VENDOR_I825XX
diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile
new file mode 100644
index 0000000..f68a369
--- /dev/null
+++ b/drivers/net/ethernet/i825xx/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the Intel 82586/82593/82596 chipset device drivers.
+#
+
+obj-$(CONFIG_ARM_ETHER1) += ether1.o
+obj-$(CONFIG_EEXPRESS) += eexpress.o
+obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
+obj-$(CONFIG_ELPLUS) += 3c505.o
+obj-$(CONFIG_EL16) += 3c507.o
+obj-$(CONFIG_ELMC) += 3c523.o
+obj-$(CONFIG_ELMC_II) += 3c527.o
+obj-$(CONFIG_LP486E) += lp486e.o
+obj-$(CONFIG_NI52) += ni52.o
+obj-$(CONFIG_SUN3_82586) += sun3_82586.o
+obj-$(CONFIG_ZNET) += znet.o
+obj-$(CONFIG_APRICOT) += 82596.o
+obj-$(CONFIG_LASI_82596) += lasi_82596.o
+obj-$(CONFIG_SNI_82596) += sni_82596.o
+obj-$(CONFIG_MVME16x_NET) += 82596.o
+obj-$(CONFIG_BVME6000_NET) += 82596.o
diff --git a/drivers/net/eepro.c b/drivers/net/ethernet/i825xx/eepro.c
similarity index 100%
rename from drivers/net/eepro.c
rename to drivers/net/ethernet/i825xx/eepro.c
diff --git a/drivers/net/eexpress.c b/drivers/net/ethernet/i825xx/eexpress.c
similarity index 100%
rename from drivers/net/eexpress.c
rename to drivers/net/ethernet/i825xx/eexpress.c
diff --git a/drivers/net/eexpress.h b/drivers/net/ethernet/i825xx/eexpress.h
similarity index 100%
rename from drivers/net/eexpress.h
rename to drivers/net/ethernet/i825xx/eexpress.h
diff --git a/drivers/net/arm/ether1.c b/drivers/net/ethernet/i825xx/ether1.c
similarity index 100%
rename from drivers/net/arm/ether1.c
rename to drivers/net/ethernet/i825xx/ether1.c
diff --git a/drivers/net/arm/ether1.h b/drivers/net/ethernet/i825xx/ether1.h
similarity index 100%
rename from drivers/net/arm/ether1.h
rename to drivers/net/ethernet/i825xx/ether1.h
diff --git a/drivers/net/lasi_82596.c b/drivers/net/ethernet/i825xx/lasi_82596.c
similarity index 100%
rename from drivers/net/lasi_82596.c
rename to drivers/net/ethernet/i825xx/lasi_82596.c
diff --git a/drivers/net/lib82596.c b/drivers/net/ethernet/i825xx/lib82596.c
similarity index 100%
rename from drivers/net/lib82596.c
rename to drivers/net/ethernet/i825xx/lib82596.c
diff --git a/drivers/net/lp486e.c b/drivers/net/ethernet/i825xx/lp486e.c
similarity index 100%
rename from drivers/net/lp486e.c
rename to drivers/net/ethernet/i825xx/lp486e.c
diff --git a/drivers/net/ni52.c b/drivers/net/ethernet/i825xx/ni52.c
similarity index 100%
rename from drivers/net/ni52.c
rename to drivers/net/ethernet/i825xx/ni52.c
diff --git a/drivers/net/ni52.h b/drivers/net/ethernet/i825xx/ni52.h
similarity index 100%
rename from drivers/net/ni52.h
rename to drivers/net/ethernet/i825xx/ni52.h
diff --git a/drivers/net/sni_82596.c b/drivers/net/ethernet/i825xx/sni_82596.c
similarity index 100%
rename from drivers/net/sni_82596.c
rename to drivers/net/ethernet/i825xx/sni_82596.c
diff --git a/drivers/net/sun3_82586.c b/drivers/net/ethernet/i825xx/sun3_82586.c
similarity index 100%
rename from drivers/net/sun3_82586.c
rename to drivers/net/ethernet/i825xx/sun3_82586.c
diff --git a/drivers/net/sun3_82586.h b/drivers/net/ethernet/i825xx/sun3_82586.h
similarity index 100%
rename from drivers/net/sun3_82586.h
rename to drivers/net/ethernet/i825xx/sun3_82586.h
diff --git a/drivers/net/znet.c b/drivers/net/ethernet/i825xx/znet.c
similarity index 100%
rename from drivers/net/znet.c
rename to drivers/net/ethernet/i825xx/znet.c
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
new file mode 100644
index 0000000..5fe185b
--- /dev/null
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -0,0 +1,220 @@
+#
+# Intel network device configuration
+#
+
+config NET_VENDOR_INTEL
+ bool "Intel devices"
+ depends on PCI || PCI_MSI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_INTEL
+
+config E100
+ tristate "Intel(R) PRO/100+ support"
+ depends on PCI
+ select MII
+ ---help---
+ This driver supports Intel(R) PRO/100 family of adapters.
+ To verify that your adapter is supported, find the board ID number
+ on the adapter. Look for a label that has a barcode and a number
+ in the format 123456-001 (six digits hyphen three digits).
+
+ Use the above information and the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ to identify the adapter.
+
+ For the latest Intel PRO/100 network driver for Linux, see:
+
+ <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e100.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e100.
+
+config E1000
+ tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000.
+
+config E1000E
+ tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+ depends on PCI && (!SPARC32 || BROKEN)
+ select CRC32
+ ---help---
+ This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
+ ethernet family of adapters. For PCI or PCI-X e1000 adapters,
+ use the regular e1000 driver For more information on how to
+ identify your adapter, go to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000e.
+
+config IGB
+ tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igb.
+
+config IGB_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IGB && DCA && !(IGB=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IGBVF
+ tristate "Intel(R) 82576 Virtual Function Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82576 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igbvf.
+
+config IXGB
+ tristate "Intel(R) PRO/10GbE support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/10GbE family of adapters for
+ PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
+ instead. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgb.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgb.
+
+config IXGBE
+ tristate "Intel(R) 10GbE PCI Express adapters support"
+ depends on PCI && INET
+ select MDIO
+ ---help---
+ This driver supports Intel(R) 10GbE PCI Express family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbe.
+
+config IXGBE_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IXGBE_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on IXGBE && DCB
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
+
+ If unsure, say N.
+
+config IXGBEVF
+ tristate "Intel(R) 82599 Virtual Function Ethernet support"
+ depends on PCI_MSI
+ ---help---
+ This driver supports Intel(R) 82599 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
+
+ <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgbevf.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbevf. MSI-X interrupt support is required
+ for this driver to work correctly.
+
+endif # NET_VENDOR_INTEL
diff --git a/drivers/net/ethernet/intel/Makefile b/drivers/net/ethernet/intel/Makefile
new file mode 100644
index 0000000..c8210e6
--- /dev/null
+++ b/drivers/net/ethernet/intel/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the Intel network device drivers.
+#
+
+obj-$(CONFIG_E100) += e100.o
+obj-$(CONFIG_E1000) += e1000/
+obj-$(CONFIG_E1000E) += e1000e/
+obj-$(CONFIG_IGB) += igb/
+obj-$(CONFIG_IGBVF) += igbvf/
+obj-$(CONFIG_IXGBE) += ixgbe/
+obj-$(CONFIG_IXGBEVF) += ixgbevf/
+obj-$(CONFIG_IXGB) += ixgb/
diff --git a/drivers/net/e100.c b/drivers/net/ethernet/intel/e100.c
similarity index 100%
rename from drivers/net/e100.c
rename to drivers/net/ethernet/intel/e100.c
diff --git a/drivers/net/e1000/Makefile b/drivers/net/ethernet/intel/e1000/Makefile
similarity index 100%
rename from drivers/net/e1000/Makefile
rename to drivers/net/ethernet/intel/e1000/Makefile
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h
similarity index 100%
rename from drivers/net/e1000/e1000.h
rename to drivers/net/ethernet/intel/e1000/e1000.h
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
similarity index 100%
rename from drivers/net/e1000/e1000_ethtool.c
rename to drivers/net/ethernet/intel/e1000/e1000_ethtool.c
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c
similarity index 100%
rename from drivers/net/e1000/e1000_hw.c
rename to drivers/net/ethernet/intel/e1000/e1000_hw.c
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/ethernet/intel/e1000/e1000_hw.h
similarity index 100%
rename from drivers/net/e1000/e1000_hw.h
rename to drivers/net/ethernet/intel/e1000/e1000_hw.h
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
similarity index 100%
rename from drivers/net/e1000/e1000_main.c
rename to drivers/net/ethernet/intel/e1000/e1000_main.c
diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/ethernet/intel/e1000/e1000_osdep.h
similarity index 100%
rename from drivers/net/e1000/e1000_osdep.h
rename to drivers/net/ethernet/intel/e1000/e1000_osdep.h
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/ethernet/intel/e1000/e1000_param.c
similarity index 100%
rename from drivers/net/e1000/e1000_param.c
rename to drivers/net/ethernet/intel/e1000/e1000_param.c
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
similarity index 100%
rename from drivers/net/e1000e/es2lan.c
rename to drivers/net/ethernet/intel/e1000e/80003es2lan.c
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
similarity index 100%
rename from drivers/net/e1000e/82571.c
rename to drivers/net/ethernet/intel/e1000e/82571.c
diff --git a/drivers/net/e1000e/Makefile b/drivers/net/ethernet/intel/e1000e/Makefile
similarity index 96%
rename from drivers/net/e1000e/Makefile
rename to drivers/net/ethernet/intel/e1000e/Makefile
index 28519ac..948c05d 100644
--- a/drivers/net/e1000e/Makefile
+++ b/drivers/net/ethernet/intel/e1000e/Makefile
@@ -32,6 +32,6 @@
obj-$(CONFIG_E1000E) += e1000e.o
-e1000e-objs := 82571.o ich8lan.o es2lan.o \
+e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
lib.o phy.o param.o ethtool.o netdev.o
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
similarity index 100%
rename from drivers/net/e1000e/defines.h
rename to drivers/net/ethernet/intel/e1000e/defines.h
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
similarity index 100%
rename from drivers/net/e1000e/e1000.h
rename to drivers/net/ethernet/intel/e1000e/e1000.h
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
similarity index 100%
rename from drivers/net/e1000e/ethtool.c
rename to drivers/net/ethernet/intel/e1000e/ethtool.c
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
similarity index 100%
rename from drivers/net/e1000e/hw.h
rename to drivers/net/ethernet/intel/e1000e/hw.h
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
similarity index 100%
rename from drivers/net/e1000e/ich8lan.c
rename to drivers/net/ethernet/intel/e1000e/ich8lan.c
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/ethernet/intel/e1000e/lib.c
similarity index 100%
rename from drivers/net/e1000e/lib.c
rename to drivers/net/ethernet/intel/e1000e/lib.c
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
similarity index 100%
rename from drivers/net/e1000e/netdev.c
rename to drivers/net/ethernet/intel/e1000e/netdev.c
diff --git a/drivers/net/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
similarity index 100%
rename from drivers/net/e1000e/param.c
rename to drivers/net/ethernet/intel/e1000e/param.c
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
similarity index 100%
rename from drivers/net/e1000e/phy.c
rename to drivers/net/ethernet/intel/e1000e/phy.c
diff --git a/drivers/net/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile
similarity index 100%
rename from drivers/net/igb/Makefile
rename to drivers/net/ethernet/intel/igb/Makefile
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
similarity index 100%
rename from drivers/net/igb/e1000_82575.c
rename to drivers/net/ethernet/intel/igb/e1000_82575.c
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
similarity index 100%
rename from drivers/net/igb/e1000_82575.h
rename to drivers/net/ethernet/intel/igb/e1000_82575.h
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
similarity index 100%
rename from drivers/net/igb/e1000_defines.h
rename to drivers/net/ethernet/intel/igb/e1000_defines.h
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
similarity index 100%
rename from drivers/net/igb/e1000_hw.h
rename to drivers/net/ethernet/intel/igb/e1000_hw.h
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
similarity index 100%
rename from drivers/net/igb/e1000_mac.c
rename to drivers/net/ethernet/intel/igb/e1000_mac.c
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/ethernet/intel/igb/e1000_mac.h
similarity index 100%
rename from drivers/net/igb/e1000_mac.h
rename to drivers/net/ethernet/intel/igb/e1000_mac.h
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/ethernet/intel/igb/e1000_mbx.c
similarity index 100%
rename from drivers/net/igb/e1000_mbx.c
rename to drivers/net/ethernet/intel/igb/e1000_mbx.c
diff --git a/drivers/net/igb/e1000_mbx.h b/drivers/net/ethernet/intel/igb/e1000_mbx.h
similarity index 100%
rename from drivers/net/igb/e1000_mbx.h
rename to drivers/net/ethernet/intel/igb/e1000_mbx.h
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/ethernet/intel/igb/e1000_nvm.c
similarity index 100%
rename from drivers/net/igb/e1000_nvm.c
rename to drivers/net/ethernet/intel/igb/e1000_nvm.c
diff --git a/drivers/net/igb/e1000_nvm.h b/drivers/net/ethernet/intel/igb/e1000_nvm.h
similarity index 100%
rename from drivers/net/igb/e1000_nvm.h
rename to drivers/net/ethernet/intel/igb/e1000_nvm.h
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
similarity index 100%
rename from drivers/net/igb/e1000_phy.c
rename to drivers/net/ethernet/intel/igb/e1000_phy.c
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/ethernet/intel/igb/e1000_phy.h
similarity index 100%
rename from drivers/net/igb/e1000_phy.h
rename to drivers/net/ethernet/intel/igb/e1000_phy.h
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
similarity index 100%
rename from drivers/net/igb/e1000_regs.h
rename to drivers/net/ethernet/intel/igb/e1000_regs.h
diff --git a/drivers/net/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
similarity index 100%
rename from drivers/net/igb/igb.h
rename to drivers/net/ethernet/intel/igb/igb.h
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
similarity index 100%
rename from drivers/net/igb/igb_ethtool.c
rename to drivers/net/ethernet/intel/igb/igb_ethtool.c
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
similarity index 100%
rename from drivers/net/igb/igb_main.c
rename to drivers/net/ethernet/intel/igb/igb_main.c
diff --git a/drivers/net/igbvf/Makefile b/drivers/net/ethernet/intel/igbvf/Makefile
similarity index 100%
rename from drivers/net/igbvf/Makefile
rename to drivers/net/ethernet/intel/igbvf/Makefile
diff --git a/drivers/net/igbvf/defines.h b/drivers/net/ethernet/intel/igbvf/defines.h
similarity index 100%
rename from drivers/net/igbvf/defines.h
rename to drivers/net/ethernet/intel/igbvf/defines.h
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/ethernet/intel/igbvf/ethtool.c
similarity index 100%
rename from drivers/net/igbvf/ethtool.c
rename to drivers/net/ethernet/intel/igbvf/ethtool.c
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/ethernet/intel/igbvf/igbvf.h
similarity index 100%
rename from drivers/net/igbvf/igbvf.h
rename to drivers/net/ethernet/intel/igbvf/igbvf.h
diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/ethernet/intel/igbvf/mbx.c
similarity index 100%
rename from drivers/net/igbvf/mbx.c
rename to drivers/net/ethernet/intel/igbvf/mbx.c
diff --git a/drivers/net/igbvf/mbx.h b/drivers/net/ethernet/intel/igbvf/mbx.h
similarity index 100%
rename from drivers/net/igbvf/mbx.h
rename to drivers/net/ethernet/intel/igbvf/mbx.h
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
similarity index 100%
rename from drivers/net/igbvf/netdev.c
rename to drivers/net/ethernet/intel/igbvf/netdev.c
diff --git a/drivers/net/igbvf/regs.h b/drivers/net/ethernet/intel/igbvf/regs.h
similarity index 100%
rename from drivers/net/igbvf/regs.h
rename to drivers/net/ethernet/intel/igbvf/regs.h
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/ethernet/intel/igbvf/vf.c
similarity index 100%
rename from drivers/net/igbvf/vf.c
rename to drivers/net/ethernet/intel/igbvf/vf.c
diff --git a/drivers/net/igbvf/vf.h b/drivers/net/ethernet/intel/igbvf/vf.h
similarity index 100%
rename from drivers/net/igbvf/vf.h
rename to drivers/net/ethernet/intel/igbvf/vf.h
diff --git a/drivers/net/ixgb/Makefile b/drivers/net/ethernet/intel/ixgb/Makefile
similarity index 100%
rename from drivers/net/ixgb/Makefile
rename to drivers/net/ethernet/intel/ixgb/Makefile
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ethernet/intel/ixgb/ixgb.h
similarity index 100%
rename from drivers/net/ixgb/ixgb.h
rename to drivers/net/ethernet/intel/ixgb/ixgb.h
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ethernet/intel/ixgb/ixgb_ee.c
similarity index 100%
rename from drivers/net/ixgb/ixgb_ee.c
rename to drivers/net/ethernet/intel/ixgb/ixgb_ee.c
diff --git a/drivers/net/ixgb/ixgb_ee.h b/drivers/net/ethernet/intel/ixgb/ixgb_ee.h
similarity index 100%
rename from drivers/net/ixgb/ixgb_ee.h
rename to drivers/net/ethernet/intel/ixgb/ixgb_ee.h
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
similarity index 100%
rename from drivers/net/ixgb/ixgb_ethtool.c
rename to drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ethernet/intel/ixgb/ixgb_hw.c
similarity index 100%
rename from drivers/net/ixgb/ixgb_hw.c
rename to drivers/net/ethernet/intel/ixgb/ixgb_hw.c
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ethernet/intel/ixgb/ixgb_hw.h
similarity index 100%
rename from drivers/net/ixgb/ixgb_hw.h
rename to drivers/net/ethernet/intel/ixgb/ixgb_hw.h
diff --git a/drivers/net/ixgb/ixgb_ids.h b/drivers/net/ethernet/intel/ixgb/ixgb_ids.h
similarity index 100%
rename from drivers/net/ixgb/ixgb_ids.h
rename to drivers/net/ethernet/intel/ixgb/ixgb_ids.h
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c
similarity index 100%
rename from drivers/net/ixgb/ixgb_main.c
rename to drivers/net/ethernet/intel/ixgb/ixgb_main.c
diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
similarity index 100%
rename from drivers/net/ixgb/ixgb_osdep.h
rename to drivers/net/ethernet/intel/ixgb/ixgb_osdep.h
diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ethernet/intel/ixgb/ixgb_param.c
similarity index 100%
rename from drivers/net/ixgb/ixgb_param.c
rename to drivers/net/ethernet/intel/ixgb/ixgb_param.c
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile
similarity index 100%
rename from drivers/net/ixgbe/Makefile
rename to drivers/net/ethernet/intel/ixgbe/Makefile
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe.h
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_82598.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_82599.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_common.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_common.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_dcb.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c
diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_dcb.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_dcb_82598.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_dcb_82598.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_dcb_82599.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_dcb_82599.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_dcb_nl.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_ethtool.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_fcoe.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_fcoe.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_main.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_mbx.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c
diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_mbx.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_phy.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_phy.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_sriov.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
diff --git a/drivers/net/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_sriov.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_type.h
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
similarity index 100%
rename from drivers/net/ixgbe/ixgbe_x540.c
rename to drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
diff --git a/drivers/net/ixgbevf/Makefile b/drivers/net/ethernet/intel/ixgbevf/Makefile
similarity index 100%
rename from drivers/net/ixgbevf/Makefile
rename to drivers/net/ethernet/intel/ixgbevf/Makefile
diff --git a/drivers/net/ixgbevf/defines.h b/drivers/net/ethernet/intel/ixgbevf/defines.h
similarity index 100%
rename from drivers/net/ixgbevf/defines.h
rename to drivers/net/ethernet/intel/ixgbevf/defines.h
diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
similarity index 100%
rename from drivers/net/ixgbevf/ethtool.c
rename to drivers/net/ethernet/intel/ixgbevf/ethtool.c
diff --git a/drivers/net/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
similarity index 100%
rename from drivers/net/ixgbevf/ixgbevf.h
rename to drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
similarity index 100%
rename from drivers/net/ixgbevf/ixgbevf_main.c
rename to drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ethernet/intel/ixgbevf/mbx.c
similarity index 100%
rename from drivers/net/ixgbevf/mbx.c
rename to drivers/net/ethernet/intel/ixgbevf/mbx.c
diff --git a/drivers/net/ixgbevf/mbx.h b/drivers/net/ethernet/intel/ixgbevf/mbx.h
similarity index 100%
rename from drivers/net/ixgbevf/mbx.h
rename to drivers/net/ethernet/intel/ixgbevf/mbx.h
diff --git a/drivers/net/ixgbevf/regs.h b/drivers/net/ethernet/intel/ixgbevf/regs.h
similarity index 100%
rename from drivers/net/ixgbevf/regs.h
rename to drivers/net/ethernet/intel/ixgbevf/regs.h
diff --git a/drivers/net/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c
similarity index 100%
rename from drivers/net/ixgbevf/vf.c
rename to drivers/net/ethernet/intel/ixgbevf/vf.c
diff --git a/drivers/net/ixgbevf/vf.h b/drivers/net/ethernet/intel/ixgbevf/vf.h
similarity index 100%
rename from drivers/net/ixgbevf/vf.h
rename to drivers/net/ethernet/intel/ixgbevf/vf.h
diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig
new file mode 100644
index 0000000..a7c4424
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/Kconfig
@@ -0,0 +1,53 @@
+#
+# QLogic network device configuration
+#
+
+config NET_VENDOR_QLOGIC
+ bool "QLogic devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about QLogic cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_QLOGIC
+
+config QLA3XXX
+ tristate "QLogic QLA3XXX Network Driver Support"
+ depends on PCI
+ ---help---
+ This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called qla3xxx.
+
+config QLCNIC
+ tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+ depends on PCI
+ select FW_LOADER
+ ---help---
+ This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+ devices.
+
+config QLGE
+ tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+ depends on PCI
+ ---help---
+ This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called qlge.
+
+config NETXEN_NIC
+ tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+ depends on PCI
+ select FW_LOADER
+ ---help---
+ This enables the support for NetXen's Gigabit Ethernet card.
+
+endif # NET_VENDOR_QLOGIC
diff --git a/drivers/net/ethernet/qlogic/Makefile b/drivers/net/ethernet/qlogic/Makefile
new file mode 100644
index 0000000..b2a283d
--- /dev/null
+++ b/drivers/net/ethernet/qlogic/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the QLogic network device drivers.
+#
+
+obj-$(CONFIG_QLA3XXX) += qla3xxx.o
+obj-$(CONFIG_QLCNIC) += qlcnic/
+obj-$(CONFIG_QLGE) += qlge/
+obj-$(CONFIG_NETXEN_NIC) += netxen/
diff --git a/drivers/net/netxen/Makefile b/drivers/net/ethernet/qlogic/netxen/Makefile
similarity index 100%
rename from drivers/net/netxen/Makefile
rename to drivers/net/ethernet/qlogic/netxen/Makefile
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic.h
similarity index 100%
rename from drivers/net/netxen/netxen_nic.h
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic.h
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
similarity index 100%
rename from drivers/net/netxen/netxen_nic_ctx.c
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
similarity index 100%
rename from drivers/net/netxen/netxen_nic_ethtool.c
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
similarity index 100%
rename from drivers/net/netxen/netxen_nic_hdr.h
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
similarity index 100%
rename from drivers/net/netxen/netxen_nic_hw.c
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h
similarity index 100%
rename from drivers/net/netxen/netxen_nic_hw.h
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
similarity index 100%
rename from drivers/net/netxen/netxen_nic_init.c
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
similarity index 100%
rename from drivers/net/netxen/netxen_nic_main.c
rename to drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
diff --git a/drivers/net/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
similarity index 100%
rename from drivers/net/qla3xxx.c
rename to drivers/net/ethernet/qlogic/qla3xxx.c
diff --git a/drivers/net/qla3xxx.h b/drivers/net/ethernet/qlogic/qla3xxx.h
similarity index 100%
rename from drivers/net/qla3xxx.h
rename to drivers/net/ethernet/qlogic/qla3xxx.h
diff --git a/drivers/net/qlcnic/Makefile b/drivers/net/ethernet/qlogic/qlcnic/Makefile
similarity index 100%
rename from drivers/net/qlcnic/Makefile
rename to drivers/net/ethernet/qlogic/qlcnic/Makefile
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
similarity index 100%
rename from drivers/net/qlcnic/qlcnic.h
rename to drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
similarity index 100%
rename from drivers/net/qlcnic/qlcnic_ctx.c
rename to drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
similarity index 100%
rename from drivers/net/qlcnic/qlcnic_ethtool.c
rename to drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
similarity index 100%
rename from drivers/net/qlcnic/qlcnic_hdr.h
rename to drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
similarity index 100%
rename from drivers/net/qlcnic/qlcnic_hw.c
rename to drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
similarity index 100%
rename from drivers/net/qlcnic/qlcnic_init.c
rename to drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
similarity index 100%
rename from drivers/net/qlcnic/qlcnic_main.c
rename to drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
diff --git a/drivers/net/qlge/Makefile b/drivers/net/ethernet/qlogic/qlge/Makefile
similarity index 100%
rename from drivers/net/qlge/Makefile
rename to drivers/net/ethernet/qlogic/qlge/Makefile
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/ethernet/qlogic/qlge/qlge.h
similarity index 100%
rename from drivers/net/qlge/qlge.h
rename to drivers/net/ethernet/qlogic/qlge/qlge.h
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
similarity index 100%
rename from drivers/net/qlge/qlge_dbg.c
rename to drivers/net/ethernet/qlogic/qlge/qlge_dbg.c
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/ethernet/qlogic/qlge/qlge_ethtool.c
similarity index 100%
rename from drivers/net/qlge/qlge_ethtool.c
rename to drivers/net/ethernet/qlogic/qlge/qlge_ethtool.c
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
similarity index 100%
rename from drivers/net/qlge/qlge_main.c
rename to drivers/net/ethernet/qlogic/qlge/qlge_main.c
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/ethernet/qlogic/qlge/qlge_mpi.c
similarity index 100%
rename from drivers/net/qlge/qlge_mpi.c
rename to drivers/net/ethernet/qlogic/qlge/qlge_mpi.c
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
new file mode 100644
index 0000000..702efe6
--- /dev/null
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -0,0 +1,131 @@
+#
+# Western Digital/SMC network device configuration
+#
+
+config NET_VENDOR_SMSC
+ bool "SMC (SMSC)/Western Digital devices"
+ depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \
+ BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about SMC/Western Digital cards. If you say Y, you will
+ be asked for your specific card in the following questions.
+
+if NET_VENDOR_SMSC
+
+config SMC9194
+ tristate "SMC 9194 support"
+ depends on (ISA || MAC && BROKEN)
+ select CRC32
+ ---help---
+ This is support for the SMC9xxx based Ethernet cards. Choose this
+ option if you have a DELL laptop with the docking station, or
+ another SMC9192/9194 based chipset. Say Y if you want it compiled
+ into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc9194.
+
+config SMC91X
+ tristate "SMC 91C9x/91C1xxx support"
+ select CRC32
+ select MII
+ depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
+ MN10300 || COLDFIRE)
+ ---help---
+ This is a driver for SMC's 91x series of Ethernet chipsets,
+ including the SMC91C94 and the SMC91C111. Say Y if you want it
+ compiled into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called smc91x. If you want to compile it as a
+ module, say M here and read <file:Documentation/kbuild/modules.txt>.
+
+config PCMCIA_SMC91C92
+ tristate "SMC 91Cxx PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
+ (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called smc91c92_cs. If unsure, say N.
+
+config EPIC100
+ tristate "SMC EtherPower II"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+ which is based on the SMC83c17x (EPIC/100).
+ More specific information and updates are available from
+ <http://www.scyld.com/network/epic100.html>.
+
+config SMC911X
+ tristate "SMSC LAN911[5678] support"
+ select CRC32
+ select MII
+ depends on (ARM || SUPERH || MN10300)
+ ---help---
+ This is a driver for SMSC's LAN911x series of Ethernet chipsets
+ including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+ Say Y if you want it compiled into the kernel,
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver is also available as a module. The module will be
+ called smc911x. If you want to compile it as a module, say M
+ here and read <file:Documentation/kbuild/modules.txt>
+
+config SMSC911X
+ tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
+ depends on (ARM || SUPERH || BLACKFIN || MIPS || MN10300)
+ select CRC32
+ select MII
+ select PHYLIB
+ ---help---
+ Say Y here if you want support for SMSC LAN911x and LAN921x families
+ of ethernet controllers.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smsc911x.
+
+config SMSC911X_ARCH_HOOKS
+ def_bool n
+ depends on SMSC911X
+ ---help---
+ If the arch enables this, it allows the arch to implement various
+ hooks for more comprehensive interrupt control and also to override
+ the source of the MAC address.
+
+config SMSC9420
+ tristate "SMSC LAN9420 PCI ethernet adapter support"
+ depends on PCI
+ select CRC32
+ select PHYLIB
+ select SMSC_PHY
+ ---help---
+ This is a driver for SMSC's LAN9420 PCI ethernet adapter.
+ Say Y if you want it compiled into the kernel,
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver is also available as a module. The module will be
+ called smsc9420. If you want to compile it as a module, say M
+ here and read <file:Documentation/kbuild/modules.txt>
+
+endif # NET_VENDOR_SMSC
diff --git a/drivers/net/ethernet/smsc/Makefile b/drivers/net/ethernet/smsc/Makefile
new file mode 100644
index 0000000..f3438de
--- /dev/null
+++ b/drivers/net/ethernet/smsc/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the SMSC network device drivers.
+#
+
+obj-$(CONFIG_SMC9194) += smc9194.o
+obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
+obj-$(CONFIG_EPIC100) += epic100.o
+obj-$(CONFIG_SMSC9420) += smsc9420.o
+obj-$(CONFIG_SMC911X) += smc911x.o
+obj-$(CONFIG_SMSC911X) += smsc911x.o
diff --git a/drivers/net/epic100.c b/drivers/net/ethernet/smsc/epic100.c
similarity index 100%
rename from drivers/net/epic100.c
rename to drivers/net/ethernet/smsc/epic100.c
diff --git a/drivers/net/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
similarity index 100%
rename from drivers/net/smc911x.c
rename to drivers/net/ethernet/smsc/smc911x.c
diff --git a/drivers/net/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h
similarity index 100%
rename from drivers/net/smc911x.h
rename to drivers/net/ethernet/smsc/smc911x.h
diff --git a/drivers/net/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
similarity index 100%
rename from drivers/net/smc9194.c
rename to drivers/net/ethernet/smsc/smc9194.c
diff --git a/drivers/net/smc9194.h b/drivers/net/ethernet/smsc/smc9194.h
similarity index 100%
rename from drivers/net/smc9194.h
rename to drivers/net/ethernet/smsc/smc9194.h
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c
similarity index 100%
rename from drivers/net/pcmcia/smc91c92_cs.c
rename to drivers/net/ethernet/smsc/smc91c92_cs.c
diff --git a/drivers/net/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
similarity index 100%
rename from drivers/net/smc91x.c
rename to drivers/net/ethernet/smsc/smc91x.c
diff --git a/drivers/net/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
similarity index 100%
rename from drivers/net/smc91x.h
rename to drivers/net/ethernet/smsc/smc91x.h
diff --git a/drivers/net/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
similarity index 100%
rename from drivers/net/smsc911x.c
rename to drivers/net/ethernet/smsc/smsc911x.c
diff --git a/drivers/net/smsc911x.h b/drivers/net/ethernet/smsc/smsc911x.h
similarity index 100%
rename from drivers/net/smsc911x.h
rename to drivers/net/ethernet/smsc/smsc911x.h
diff --git a/drivers/net/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c
similarity index 100%
rename from drivers/net/smsc9420.c
rename to drivers/net/ethernet/smsc/smsc9420.c
diff --git a/drivers/net/smsc9420.h b/drivers/net/ethernet/smsc/smsc9420.h
similarity index 100%
rename from drivers/net/smsc9420.h
rename to drivers/net/ethernet/smsc/smsc9420.h
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 9b8f793..f5a738f 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -21,24 +21,6 @@
if NET_PCMCIA && PCMCIA
-config PCMCIA_3C589
- tristate "3Com 3c589 PCMCIA support"
- help
- Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
- (PC-card) Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called 3c589_cs. If unsure, say N.
-
-config PCMCIA_3C574
- tristate "3Com 3c574 PCMCIA support"
- help
- Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
- (PC-card) Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called 3c574_cs. If unsure, say N.
-
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
select CRC32
@@ -49,36 +31,6 @@
To compile this driver as a module, choose M here: the module will be
called fmvj18x_cs. If unsure, say N.
-config PCMCIA_PCNET
- tristate "NE2000 compatible PCMCIA support"
- select CRC32
- help
- Say Y here if you intend to attach an NE2000 compatible PCMCIA
- (PC-card) Ethernet or Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called pcnet_cs. If unsure, say N.
-
-config PCMCIA_NMCLAN
- tristate "New Media PCMCIA support"
- help
- Say Y here if you intend to attach a New Media Ethernet or LiveWire
- PCMCIA (PC-card) Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called nmclan_cs. If unsure, say N.
-
-config PCMCIA_SMC91C92
- tristate "SMC 91Cxx PCMCIA support"
- select CRC32
- select MII
- help
- Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
- (PC-card) Ethernet or Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called smc91c92_cs. If unsure, say N.
-
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
help
@@ -88,17 +40,6 @@
To compile this driver as a module, choose M here: the module will be
called xirc2ps_cs. If unsure, say N.
-config PCMCIA_AXNET
- tristate "Asix AX88190 PCMCIA support"
- ---help---
- Say Y here if you intend to attach an Asix AX88190-based PCMCIA
- (PC-card) Fast Ethernet card to your computer. These cards are
- nearly NE2000 compatible but need a separate driver due to a few
- misfeatures.
-
- To compile this driver as a module, choose M here: the module will be
- called axnet_cs. If unsure, say N.
-
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
depends on ARCNET_COM20020
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index 87d2d99..f9c9883 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -3,14 +3,8 @@
#
# 16-bit client drivers
-obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
-obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
-obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o
-obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o
-obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
-obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o
obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 42228ca..5613e8a 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -58,7 +58,7 @@
#include "57xx_hsi_bnx2fc.h"
#include "bnx2fc_debug.h"
-#include "../../net/cnic_if.h"
+#include "../../net/ethernet/broadcom/cnic_if.h"
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index dc57007..0bd70e8 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -40,7 +40,7 @@
#include <scsi/libiscsi.h>
#include <scsi/scsi_transport_iscsi.h>
-#include "../../net/cnic_if.h"
+#include "../../net/ethernet/broadcom/cnic_if.h"
#include "57xx_iscsi_hsi.h"
#include "57xx_iscsi_constants.h"
diff --git a/drivers/scsi/cxgbi/cxgb3i/Kbuild b/drivers/scsi/cxgbi/cxgb3i/Kbuild
index 09dbf9e..6f095e2 100644
--- a/drivers/scsi/cxgbi/cxgb3i/Kbuild
+++ b/drivers/scsi/cxgbi/cxgb3i/Kbuild
@@ -1,3 +1,3 @@
-EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb3
+EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb3
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += cxgb3i.o
diff --git a/drivers/scsi/cxgbi/cxgb4i/Kbuild b/drivers/scsi/cxgbi/cxgb4i/Kbuild
index b9f4af7..8290cda 100644
--- a/drivers/scsi/cxgbi/cxgb4i/Kbuild
+++ b/drivers/scsi/cxgbi/cxgb4i/Kbuild
@@ -1,3 +1,3 @@
-EXTRA_CFLAGS += -I$(srctree)/drivers/net/cxgb4
+EXTRA_CFLAGS += -I$(srctree)/drivers/net/ethernet/chelsio/cxgb4
obj-$(CONFIG_SCSI_CXGB4_ISCSI) += cxgb4i.o
