V4L/DVB (11085): au0828/au8522: Codingstyle fixes

Take a pass over all of the au0828/au8522 files and cleanup all the codingstyle
issues.  This patch does not make *any* functional change to the code.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 5646363..2ad84c2 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -67,39 +67,40 @@
    0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13"
 */
 struct au8522_register_config filter_coef[] = {
-	{AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00}},
-	{AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40}},
-	{AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09}},
-	{AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38}},
-	{AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff}},
-	{AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7}},
-	{AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf}},
-	{AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06}},
-	{AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30}},
-	{AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01}},
-	{AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd}},
-	{AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf}},
-	{AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7}},
-	{AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb}},
-	{AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0}},
-	{AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f}},
-	{AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8}},
-	{AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb}},
-	{AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5}},
-	{AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e}},
-	{AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15}},
-	{AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34}},
+	{AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} },
+	{AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} },
+	{AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} },
+	{AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} },
+	{AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} },
+	{AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} },
+	{AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} },
+	{AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} },
+	{AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} },
+	{AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} },
+	{AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} },
+	{AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} },
+	{AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} },
+	{AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} },
+	{AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} },
+	{AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} },
+	{AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} },
+	{AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} },
+	{AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} },
+	{AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} },
+	{AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} },
 
 };
-#define NUM_FILTER_COEF (sizeof (filter_coef) / sizeof(struct au8522_register_config))
+#define NUM_FILTER_COEF (sizeof(filter_coef)\
+			 / sizeof(struct au8522_register_config))
 
 
 /* Registers 0x060b through 0x0652 are the LP Filter coefficients
@@ -108,80 +109,81 @@
    Note: the "ATVRF/ATVRF13" mode has never been tested
 */
 struct au8522_register_config lpfilter_coef[] = {
-	{0x060b, {0x21, 0x0b}},
-	{0x060c, {0xad, 0xad}},
-	{0x060d, {0x70, 0xf0}},
-	{0x060e, {0xea, 0xe9}},
-	{0x060f, {0xdd, 0xdd}},
-	{0x0610, {0x08, 0x64}},
-	{0x0611, {0x60, 0x60}},
-	{0x0612, {0xf8, 0xb2}},
-	{0x0613, {0x01, 0x02}},
-	{0x0614, {0xe4, 0xb4}},
-	{0x0615, {0x19, 0x02}},
-	{0x0616, {0xae, 0x2e}},
-	{0x0617, {0xee, 0xc5}},
-	{0x0618, {0x56, 0x56}},
-	{0x0619, {0x30, 0x58}},
-	{0x061a, {0xf9, 0xf8}},
-	{0x061b, {0x24, 0x64}},
-	{0x061c, {0x07, 0x07}},
-	{0x061d, {0x30, 0x30}},
-	{0x061e, {0xa9, 0xed}},
-	{0x061f, {0x09, 0x0b}},
-	{0x0620, {0x42, 0xc2}},
-	{0x0621, {0x1d, 0x2a}},
-	{0x0622, {0xd6, 0x56}},
-	{0x0623, {0x95, 0x8b}},
-	{0x0624, {0x2b, 0x2b}},
-	{0x0625, {0x30, 0x24}},
-	{0x0626, {0x3e, 0x3e}},
-	{0x0627, {0x62, 0xe2}},
-	{0x0628, {0xe9, 0xf5}},
-	{0x0629, {0x99, 0x19}},
-	{0x062a, {0xd4, 0x11}},
-	{0x062b, {0x03, 0x04}},
-	{0x062c, {0xb5, 0x85}},
-	{0x062d, {0x1e, 0x20}},
-	{0x062e, {0x2a, 0xea}},
-	{0x062f, {0xd7, 0xd2}},
-	{0x0630, {0x15, 0x15}},
-	{0x0631, {0xa3, 0xa9}},
-	{0x0632, {0x1f, 0x1f}},
-	{0x0633, {0xf9, 0xd1}},
-	{0x0634, {0xc0, 0xc3}},
-	{0x0635, {0x4d, 0x8d}},
-	{0x0636, {0x21, 0x31}},
-	{0x0637, {0x83, 0x83}},
-	{0x0638, {0x08, 0x8c}},
-	{0x0639, {0x19, 0x19}},
-	{0x063a, {0x45, 0xa5}},
-	{0x063b, {0xef, 0xec}},
-	{0x063c, {0x8a, 0x8a}},
-	{0x063d, {0xf4, 0xf6}},
-	{0x063e, {0x8f, 0x8f}},
-	{0x063f, {0x44, 0x0c}},
-	{0x0640, {0xef, 0xf0}},
-	{0x0641, {0x66, 0x66}},
-	{0x0642, {0xcc, 0xd2}},
-	{0x0643, {0x41, 0x41}},
-	{0x0644, {0x63, 0x93}},
-	{0x0645, {0x8e, 0x8e}},
-	{0x0646, {0xa2, 0x42}},
-	{0x0647, {0x7b, 0x7b}},
-	{0x0648, {0x04, 0x04}},
-	{0x0649, {0x00, 0x00}},
-	{0x064a, {0x40, 0x40}},
-	{0x064b, {0x8c, 0x98}},
-	{0x064c, {0x00, 0x00}},
-	{0x064d, {0x63, 0xc3}},
-	{0x064e, {0x04, 0x04}},
-	{0x064f, {0x20, 0x20}},
-	{0x0650, {0x00, 0x00}},
-	{0x0651, {0x40 ,0x40}},
-	{0x0652, {0x01, 0x01}},
+	{0x060b, {0x21, 0x0b} },
+	{0x060c, {0xad, 0xad} },
+	{0x060d, {0x70, 0xf0} },
+	{0x060e, {0xea, 0xe9} },
+	{0x060f, {0xdd, 0xdd} },
+	{0x0610, {0x08, 0x64} },
+	{0x0611, {0x60, 0x60} },
+	{0x0612, {0xf8, 0xb2} },
+	{0x0613, {0x01, 0x02} },
+	{0x0614, {0xe4, 0xb4} },
+	{0x0615, {0x19, 0x02} },
+	{0x0616, {0xae, 0x2e} },
+	{0x0617, {0xee, 0xc5} },
+	{0x0618, {0x56, 0x56} },
+	{0x0619, {0x30, 0x58} },
+	{0x061a, {0xf9, 0xf8} },
+	{0x061b, {0x24, 0x64} },
+	{0x061c, {0x07, 0x07} },
+	{0x061d, {0x30, 0x30} },
+	{0x061e, {0xa9, 0xed} },
+	{0x061f, {0x09, 0x0b} },
+	{0x0620, {0x42, 0xc2} },
+	{0x0621, {0x1d, 0x2a} },
+	{0x0622, {0xd6, 0x56} },
+	{0x0623, {0x95, 0x8b} },
+	{0x0624, {0x2b, 0x2b} },
+	{0x0625, {0x30, 0x24} },
+	{0x0626, {0x3e, 0x3e} },
+	{0x0627, {0x62, 0xe2} },
+	{0x0628, {0xe9, 0xf5} },
+	{0x0629, {0x99, 0x19} },
+	{0x062a, {0xd4, 0x11} },
+	{0x062b, {0x03, 0x04} },
+	{0x062c, {0xb5, 0x85} },
+	{0x062d, {0x1e, 0x20} },
+	{0x062e, {0x2a, 0xea} },
+	{0x062f, {0xd7, 0xd2} },
+	{0x0630, {0x15, 0x15} },
+	{0x0631, {0xa3, 0xa9} },
+	{0x0632, {0x1f, 0x1f} },
+	{0x0633, {0xf9, 0xd1} },
+	{0x0634, {0xc0, 0xc3} },
+	{0x0635, {0x4d, 0x8d} },
+	{0x0636, {0x21, 0x31} },
+	{0x0637, {0x83, 0x83} },
+	{0x0638, {0x08, 0x8c} },
+	{0x0639, {0x19, 0x19} },
+	{0x063a, {0x45, 0xa5} },
+	{0x063b, {0xef, 0xec} },
+	{0x063c, {0x8a, 0x8a} },
+	{0x063d, {0xf4, 0xf6} },
+	{0x063e, {0x8f, 0x8f} },
+	{0x063f, {0x44, 0x0c} },
+	{0x0640, {0xef, 0xf0} },
+	{0x0641, {0x66, 0x66} },
+	{0x0642, {0xcc, 0xd2} },
+	{0x0643, {0x41, 0x41} },
+	{0x0644, {0x63, 0x93} },
+	{0x0645, {0x8e, 0x8e} },
+	{0x0646, {0xa2, 0x42} },
+	{0x0647, {0x7b, 0x7b} },
+	{0x0648, {0x04, 0x04} },
+	{0x0649, {0x00, 0x00} },
+	{0x064a, {0x40, 0x40} },
+	{0x064b, {0x8c, 0x98} },
+	{0x064c, {0x00, 0x00} },
+	{0x064d, {0x63, 0xc3} },
+	{0x064e, {0x04, 0x04} },
+	{0x064f, {0x20, 0x20} },
+	{0x0650, {0x00, 0x00} },
+	{0x0651, {0x40, 0x40} },
+	{0x0652, {0x01, 0x01} },
 };
-#define NUM_LPFILTER_COEF (sizeof (lpfilter_coef) / sizeof(struct au8522_register_config))
+#define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\
+			   / sizeof(struct au8522_register_config))
 
 static inline struct au8522_state *to_state(struct v4l2_subdev *sd)
 {
@@ -202,14 +204,17 @@
 	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH, 0x00);
 	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH, 0x00);
 	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H, 0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H,0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H,0x00);
-	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H,0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H,
+			0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H,
+			0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H,
+			0x00);
 
 	/* Setup the VBI registers */
-	for (i = 0x30; i < 0x60; i++) {
+	for (i = 0x30; i < 0x60; i++)
 		au8522_writereg(state, i, 0x40);
-	}
+
 	/* For some reason, every register is 0x40 except register 0x44
 	   (confirmed via the HVR-950q USB capture) */
 	au8522_writereg(state, 0x44, 0x60);
@@ -448,7 +453,7 @@
 
 	if (aud_input != AU8522_AUDIO_SIF) {
 		/* The caller asked for a mode we don't currently support */
-		printk("Unsupported audio mode requested! mode=%d\n",
+		printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n",
 		       aud_input);
 		return;
 	}
@@ -668,7 +673,7 @@
 	} else if (route->input == AU8522_COMPOSITE_CH4_SIF) {
 		au8522_setup_cvbs_tuner_mode(state);
 	} else {
-		printk("au8522 mode not currently supported\n");
+		printk(KERN_ERR "au8522 mode not currently supported\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -782,15 +787,15 @@
 	instance = au8522_get_state(&state, client->adapter, client->addr);
 	switch (instance) {
 	case 0:
-		printk("au8522_decoder allocation failed\n");
+		printk(KERN_ERR "au8522_decoder allocation failed\n");
 		return -EIO;
 	case 1:
 		/* new demod instance */
-		printk("au8522_decoder creating new instance...\n");
+		printk(KERN_INFO "au8522_decoder creating new instance...\n");
 		break;
 	default:
 		/* existing demod instance */
-		printk("au8522_decoder attaching to existing instance...\n");
+		printk(KERN_INFO "au8522_decoder attach existing instance.\n");
 		break;
 	}
 
diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c
index 7e24b91..3573125 100644
--- a/drivers/media/dvb/frontends/au8522_dig.c
+++ b/drivers/media/dvb/frontends/au8522_dig.c
@@ -36,16 +36,16 @@
 static LIST_HEAD(hybrid_tuner_instance_list);
 static DEFINE_MUTEX(au8522_list_mutex);
 
-#define dprintk(arg...) do {		\
-	if (debug) 			\
-		 printk(arg); 		\
+#define dprintk(arg...)\
+	do { if (debug)\
+		printk(arg);\
 	} while (0)
 
 /* 16 bit registers, 8 bit values */
 int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)
 {
 	int ret;
-	u8 buf [] = { (reg >> 8) | 0x80, reg & 0xff, data };
+	u8 buf[] = { (reg >> 8) | 0x80, reg & 0xff, data };
 
 	struct i2c_msg msg = { .addr = state->config->demod_address,
 			       .flags = 0, .buf = buf, .len = 3 };
@@ -62,10 +62,10 @@
 u8 au8522_readreg(struct au8522_state *state, u16 reg)
 {
 	int ret;
-	u8 b0 [] = { (reg >> 8) | 0x40, reg & 0xff };
-	u8 b1 [] = { 0 };
+	u8 b0[] = { (reg >> 8) | 0x40, reg & 0xff };
+	u8 b1[] = { 0 };
 
-	struct i2c_msg msg [] = {
+	struct i2c_msg msg[] = {
 		{ .addr = state->config->demod_address, .flags = 0,
 		  .buf = b0, .len = 2 },
 		{ .addr = state->config->demod_address, .flags = I2C_M_RD,
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index a12c92c..1b48eb5 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -150,13 +150,13 @@
 	/* Make sure we support the board model */
 	switch (tv.model) {
 	case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
-	case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
-	case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
-	case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
-	case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */
-	case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */
-	case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */
-	case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */
+	case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
+	case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
+	case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
 	case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
 		break;
 	default:
@@ -202,9 +202,8 @@
 		   demod) */
 		sd = v4l2_i2c_new_subdev(&dev->i2c_adap, "au8522", "au8522",
 					 0x8e >> 1);
-		if (sd == NULL) {
-			printk("analog subdev registration failure\n");
-		}
+		if (sd == NULL)
+			printk(KERN_ERR "analog subdev registration failed\n");
 	}
 
 	/* Setup tuners */
@@ -212,9 +211,8 @@
 		/* Load the tuner module, which does the attach */
 		sd = v4l2_i2c_new_subdev(&dev->i2c_adap, "tuner", "tuner",
 					 dev->board.tuner_addr);
-		if (sd == NULL) {
-			printk("analog tuner subdev registration failure\n");
-		}
+		if (sd == NULL)
+			printk(KERN_ERR "tuner subdev registration fail\n");
 
 		tun_setup.mode_mask      = mode_mask;
 		tun_setup.type           = dev->board.tuner_type;
diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/video/au0828/au0828-i2c.c
index e841ba5..1b110f3 100644
--- a/drivers/media/video/au0828/au0828-i2c.c
+++ b/drivers/media/video/au0828/au0828-i2c.c
@@ -145,11 +145,10 @@
 	   requires us to slow down the i2c clock until we have a better
 	   strategy (such as using the secondary i2c bus to do firmware
 	   loading */
-	if ((msg->addr << 1) == 0xc2) {
+	if ((msg->addr << 1) == 0xc2)
 		au0828_write(dev, REG_202, 0x40);
-	} else {
+	else
 		au0828_write(dev, REG_202, 0x07);
-	}
 
 	/* Hardware needs 8 bit addresses */
 	au0828_write(dev, REG_203, msg->addr << 1);
@@ -223,11 +222,10 @@
 	   requires us to slow down the i2c clock until we have a better
 	   strategy (such as using the secondary i2c bus to do firmware
 	   loading */
-	if ((msg->addr << 1) == 0xc2) {
+	if ((msg->addr << 1) == 0xc2)
 		au0828_write(dev, REG_202, 0x40);
-	} else {
+	else
 		au0828_write(dev, REG_202, 0x07);
-	}
 
 	/* Hardware needs 8 bit addresses */
 	au0828_write(dev, REG_203, msg->addr << 1);
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 800345c..0574964 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -33,7 +33,6 @@
 #include <linux/device.h>
 #include <linux/suspend.h>
 #include <linux/version.h>
-#include <linux/videodev.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
@@ -46,9 +45,6 @@
 
 #define AU0828_VERSION_CODE KERNEL_VERSION(0, 0, 1)
 
-/* Forward declarations */
-void au0828_analog_stream_reset(struct au0828_dev *dev);
-
 /* ------------------------------------------------------------------
 	Videobuf operations
    ------------------------------------------------------------------*/
@@ -107,12 +103,12 @@
 static int check_dev(struct au0828_dev *dev)
 {
 	if (dev->dev_state & DEV_DISCONNECTED) {
-		printk("v4l2 ioctl: device not present\n");
+		printk(KERN_INFO "v4l2 ioctl: device not present\n");
 		return -ENODEV;
 	}
 
 	if (dev->dev_state & DEV_MISCONFIGURED) {
-		printk("v4l2 ioctl: device is misconfigured; "
+		printk(KERN_INFO "v4l2 ioctl: device is misconfigured; "
 		       "close and open it again\n");
 		return -EIO;
 	}
@@ -373,7 +369,7 @@
 
 		if ((char *)startwrite + lencopy > (char *)outp +
 		    buf->vb.size) {
-			au0828_isocdbg("Overflow of %zi bytes past buffer end (2)\n",
+			au0828_isocdbg("Overflow %zi bytes past buf end (2)\n",
 				       ((char *)startwrite + lencopy) -
 				       ((char *)outp + buf->vb.size));
 			lencopy = remain = (char *)outp + buf->vb.size -
@@ -389,9 +385,8 @@
 
 	if (offset > 1440) {
 		/* We have enough data to check for greenscreen */
-		if (outp[0] < 0x60 && outp[1440] < 0x60) {
+		if (outp[0] < 0x60 && outp[1440] < 0x60)
 			dev->greenscreen_detected = 1;
-		}
 	}
 
 	dma_q->pos += len;
@@ -457,9 +452,9 @@
 				continue;
 		}
 
-		if (urb->iso_frame_desc[i].actual_length <= 0) {
+		if (urb->iso_frame_desc[i].actual_length <= 0)
 			continue;
-		}
+
 		if (urb->iso_frame_desc[i].actual_length >
 						dev->max_pkt_size) {
 			au0828_isocdbg("packet bigger than packet size");
@@ -480,25 +475,23 @@
 				if (buf != NULL)
 					buffer_filled(dev, dma_q, buf);
 				get_next_buf(dma_q, &buf);
-				if (buf == NULL) {
+				if (buf == NULL)
 					outp = NULL;
-				} else
+				else
 					outp = videobuf_to_vmalloc(&buf->vb);
 			}
 
 			if (buf != NULL) {
-				if (fbyte & 0x40) {
+				if (fbyte & 0x40)
 					buf->top_field = 1;
-				} else {
+				else
 					buf->top_field = 0;
-				}
 			}
 
 			dma_q->pos = 0;
 		}
-		if (buf != NULL) {
+		if (buf != NULL)
 			au0828_copy_video(dev, dma_q, buf, p, outp, len);
-		}
 	}
 	return rc;
 }
@@ -566,7 +559,7 @@
 	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
 		rc = videobuf_iolock(vq, &buf->vb, NULL);
 		if (rc < 0) {
-			printk("videobuf_iolock failed\n");
+			printk(KERN_INFO "videobuf_iolock failed\n");
 			goto fail;
 		}
 	}
@@ -579,7 +572,7 @@
 				      AU0828_MAX_ISO_BUFS, dev->max_pkt_size,
 				      au0828_isoc_copy);
 		if (rc < 0) {
-			printk("au0828_init_isoc failed\n");
+			printk(KERN_INFO "au0828_init_isoc failed\n");
 			goto fail;
 		}
 	}
@@ -681,11 +674,11 @@
 	int ret = 0;
 
 	dev->stream_state = STREAM_INTERRUPT;
-	if(dev->dev_state == DEV_DISCONNECTED)
+	if (dev->dev_state == DEV_DISCONNECTED)
 		return -ENODEV;
-	else if(ret) {
+	else if (ret) {
 		dev->dev_state = DEV_MISCONFIGURED;
-		dprintk(1, "%s device is misconfigured!\n", __FUNCTION__);
+		dprintk(1, "%s device is misconfigured!\n", __func__);
 		return ret;
 	}
 	return 0;
@@ -753,23 +746,23 @@
 
 	list_for_each(list, &au0828_devlist) {
 		h = list_entry(list, struct au0828_dev, au0828list);
-		if(h->vdev->minor == minor) {
+		if (h->vdev->minor == minor) {
 			dev = h;
 			type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 		}
 #ifdef VBI_NOT_YET_WORKING
-		if(h->vbi_dev->minor == minor) {
+		if (h->vbi_dev->minor == minor) {
 			dev = h;
 			type = V4L2_BUF_TYPE_VBI_CAPTURE;
 		}
 #endif
 	}
 
-	if(NULL == dev)
+	if (NULL == dev)
 		return -ENODEV;
 
 	fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL);
-	if(NULL == fh) {
+	if (NULL == fh) {
 		dprintk(1, "Failed allocate au0828_fh struct!\n");
 		return -ENOMEM;
 	}
@@ -778,11 +771,11 @@
 	fh->dev = dev;
 	filp->private_data = fh;
 
-	if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
 		/* set au0828 interface0 to AS5 here again */
 		ret = usb_set_interface(dev->usbdev, 0, 5);
-		if(ret < 0) {
-			printk("Au0828 can't set alt setting to 5!\n");
+		if (ret < 0) {
+			printk(KERN_INFO "Au0828 can't set alternate to 5!\n");
 			return -EBUSY;
 		}
 		dev->width = NTSC_STD_W;
@@ -821,11 +814,11 @@
 	if (res_check(fh))
 		res_free(fh);
 
-	if(dev->users == 1) {
+	if (dev->users == 1) {
 		videobuf_stop(&fh->vb_vidq);
 		videobuf_mmap_free(&fh->vb_vidq);
 
-		if(dev->dev_state & DEV_DISCONNECTED) {
+		if (dev->dev_state & DEV_DISCONNECTED) {
 			au0828_analog_unregister(dev);
 			mutex_unlock(&dev->lock);
 			kfree(dev);
@@ -839,8 +832,8 @@
 		/* When close the device, set the usb intf0 into alt0 to free
 		   USB bandwidth */
 		ret = usb_set_interface(dev->usbdev, 0, 0);
-		if(ret < 0)
-			printk("Au0828 can't set alt setting to 0!\n");
+		if (ret < 0)
+			printk(KERN_INFO "Au0828 can't set alternate to 0!\n");
 	}
 
 	kfree(fh);
@@ -861,7 +854,7 @@
 	if (rc < 0)
 		return rc;
 
-	if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		mutex_lock(&dev->lock);
 		rc = res_get(fh);
 		mutex_unlock(&dev->lock);
@@ -937,28 +930,25 @@
 	maxheight = 480;
 
 #ifdef VBI_NOT_YET_WORKING
-	if(format->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
+	if (format->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
 		dprintk(1, "VBI format set: to be supported!\n");
 		return 0;
 	}
-	if(format->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+	if (format->type == V4L2_BUF_TYPE_VBI_CAPTURE)
 		return 0;
-	}
 #endif
-	if(format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+	if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
-	}
 
 	/* If they are demanding a format other than the one we support,
 	   bail out (tvtime asks for UYVY and then retries with YUYV) */
-	if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY) {
+	if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY)
 		return -EINVAL;
-	}
 
 	/* format->fmt.pix.width only support 720 and height 480 */
-	if(width != 720)
+	if (width != 720)
 		width = 720;
-	if(height != 480)
+	if (height != 480)
 		height = 480;
 
 	format->fmt.pix.width = width;
@@ -969,7 +959,7 @@
 	format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
 	format->fmt.pix.field = V4L2_FIELD_INTERLACED;
 
-	if(cmd == VIDIOC_TRY_FMT)
+	if (cmd == VIDIOC_TRY_FMT)
 		return 0;
 
 	/* maybe set new image format, driver current only support 720*480 */
@@ -979,9 +969,10 @@
 	dev->field_size = width * height;
 	dev->bytesperline = width * 2;
 
-	if(dev->stream_state == STREAM_ON) {
+	if (dev->stream_state == STREAM_ON) {
 		dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n");
-		if((ret = au0828_stream_interrupt(dev))) {
+		ret = au0828_stream_interrupt(dev);
+		if (ret != 0) {
 			dprintk(1, "error interrupting video stream!\n");
 			return ret;
 		}
@@ -989,8 +980,8 @@
 
 	/* set au0828 interface0 to AS5 here again */
 	ret = usb_set_interface(dev->usbdev, 0, 5);
-	if(ret < 0) {
-		printk("Au0828 can't set alt setting to 5!\n");
+	if (ret < 0) {
+		printk(KERN_INFO "Au0828 can't set alt setting to 5!\n");
 		return -EBUSY;
 	}
 
@@ -1039,7 +1030,7 @@
 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 					struct v4l2_fmtdesc *f)
 {
-	if(f->index)
+	if (f->index)
 		return -EINVAL;
 
 	f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -1084,13 +1075,13 @@
 	int rc;
 
 	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
-		printk("%s queue busy\n", __func__);
+		printk(KERN_INFO "%s queue busy\n", __func__);
 		rc = -EBUSY;
 		goto out;
 	}
 
 	if (dev->stream_on && !fh->stream_on) {
-		printk("%s device in use by another fh\n", __func__);
+		printk(KERN_INFO "%s device in use by another fh\n", __func__);
 		rc = -EBUSY;
 		goto out;
 	}
@@ -1132,15 +1123,15 @@
 
 	tmp = input->index;
 
-	if(tmp > AU0828_MAX_INPUT)
+	if (tmp > AU0828_MAX_INPUT)
 		return -EINVAL;
-	if(AUVI_INPUT(tmp).type == 0)
+	if (AUVI_INPUT(tmp).type == 0)
 		return -EINVAL;
 
 	input->index = tmp;
 	strcpy(input->name, inames[AUVI_INPUT(tmp).type]);
-	if((AUVI_INPUT(tmp).type == AU0828_VMUX_TELEVISION) ||
-	   (AUVI_INPUT(tmp).type == AU0828_VMUX_CABLE))
+	if ((AUVI_INPUT(tmp).type == AU0828_VMUX_TELEVISION) ||
+	    (AUVI_INPUT(tmp).type == AU0828_VMUX_CABLE))
 		input->type |= V4L2_INPUT_TYPE_TUNER;
 	else
 		input->type |= V4L2_INPUT_TYPE_CAMERA;
@@ -1165,15 +1156,15 @@
 	int i;
 	struct v4l2_routing route;
 
-	dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __FUNCTION__,
+	dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __func__,
 		index);
-	if(index >= AU0828_MAX_INPUT)
+	if (index >= AU0828_MAX_INPUT)
 		return -EINVAL;
-	if(AUVI_INPUT(index).type == 0)
+	if (AUVI_INPUT(index).type == 0)
 		return -EINVAL;
 	dev->ctrl_input = index;
 
-	switch(AUVI_INPUT(index).type) {
+	switch (AUVI_INPUT(index).type) {
 	case AU0828_VMUX_SVIDEO:
 		dev->input_type = AU0828_VMUX_SVIDEO;
 		break;
@@ -1195,9 +1186,8 @@
 
 	for (i = 0; i < AU0828_MAX_INPUT; i++) {
 		int enable = 0;
-		if (AUVI_INPUT(i).audio_setup == NULL) {
+		if (AUVI_INPUT(i).audio_setup == NULL)
 			continue;
-		}
 
 		if (i == index)
 			enable = 1;
@@ -1227,11 +1217,11 @@
 	struct au0828_dev *dev = fh->dev;
 	unsigned int index = a->index;
 
-	if(a->index > 1)
+	if (a->index > 1)
 		return -EINVAL;
 
 	index = dev->ctrl_ainput;
-	if(index == 0)
+	if (index == 0)
 		strcpy(a->name, "Television");
 	else
 		strcpy(a->name, "Line in");
@@ -1245,7 +1235,7 @@
 {
 	struct au0828_fh *fh = priv;
 	struct au0828_dev *dev = fh->dev;
-	if(a->index != dev->ctrl_ainput)
+	if (a->index != dev->ctrl_ainput)
 		return -EINVAL;
 	return 0;
 }
@@ -1275,7 +1265,7 @@
 	struct au0828_fh *fh = priv;
 	struct au0828_dev *dev = fh->dev;
 
-	if(t->index != 0)
+	if (t->index != 0)
 		return -EINVAL;
 
 	strcpy(t->name, "Auvitek tuner");
@@ -1290,7 +1280,7 @@
 	struct au0828_fh *fh = priv;
 	struct au0828_dev *dev = fh->dev;
 
-	if(t->index != 0)
+	if (t->index != 0)
 		return -EINVAL;
 
 	t->type = V4L2_TUNER_ANALOG_TV;
@@ -1318,9 +1308,9 @@
 	struct au0828_fh *fh = priv;
 	struct au0828_dev *dev = fh->dev;
 
-	if(freq->tuner != 0)
+	if (freq->tuner != 0)
 		return -EINVAL;
-	if(freq->type != V4L2_TUNER_ANALOG_TV)
+	if (freq->type != V4L2_TUNER_ANALOG_TV)
 		return -EINVAL;
 
 	dev->ctrl_freq = freq->frequency;
@@ -1358,7 +1348,7 @@
 	struct au0828_fh *fh = priv;
 	struct au0828_dev *dev = fh->dev;
 
-	if(cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
 	cc->bounds.left = 0;
@@ -1422,14 +1412,14 @@
 
 	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		au0828_call_i2c_clients(dev, VIDIOC_STREAMOFF, &b);
-		if((ret = au0828_stream_interrupt(dev)) != 0)
+		ret = au0828_stream_interrupt(dev);
+		if (ret != 0)
 			return ret;
 	}
 
 	for (i = 0; i < AU0828_MAX_INPUT; i++) {
-		if (AUVI_INPUT(i).audio_setup == NULL) {
+		if (AUVI_INPUT(i).audio_setup == NULL)
 			continue;
-		}
 		(AUVI_INPUT(i).audio_setup)(dev, 0);
 	}
 
@@ -1622,27 +1612,30 @@
 
 	/* set au0828 usb interface0 to as5 */
 	retval = usb_set_interface(dev->usbdev,
-				   interface->cur_altsetting->desc.bInterfaceNumber, 5);
+			interface->cur_altsetting->desc.bInterfaceNumber, 5);
 	if (retval != 0) {
-		printk("Failure setting usb interface0 to as5\n");
+		printk(KERN_INFO "Failure setting usb interface0 to as5\n");
 		return retval;
 	}
 
 	/* Figure out which endpoint has the isoc interface */
 	iface_desc = interface->cur_altsetting;
-	for(i = 0; i < iface_desc->desc.bNumEndpoints; i++){
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
 		endpoint = &iface_desc->endpoint[i].desc;
-		if(((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)	&&
-		   ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)){
+		if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		     == USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_ISOC)) {
 
 			/* we find our isoc in endpoint */
 			u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize);
-			dev->max_pkt_size = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
+			dev->max_pkt_size = (tmp & 0x07ff) *
+				(((tmp & 0x1800) >> 11) + 1);
 			dev->isoc_in_endpointaddr = endpoint->bEndpointAddress;
 		}
 	}
-	if(!(dev->isoc_in_endpointaddr)) {
-		printk("Could not locate isoc endpoint\n");
+	if (!(dev->isoc_in_endpointaddr)) {
+		printk(KERN_INFO "Could not locate isoc endpoint\n");
 		kfree(dev);
 		return -ENODEV;
 	}
@@ -1663,14 +1656,14 @@
 
 	/* allocate and fill v4l2 video struct */
 	dev->vdev = video_device_alloc();
-	if(NULL == dev->vdev) {
+	if (NULL == dev->vdev) {
 		dprintk(1, "Can't allocate video_device.\n");
 		return -ENOMEM;
 	}
 
 #ifdef VBI_NOT_YET_WORKING
 	dev->vbi_dev = video_device_alloc();
-	if(NULL == dev->vbi_dev) {
+	if (NULL == dev->vbi_dev) {
 		dprintk(1, "Can't allocate vbi_device.\n");
 		kfree(dev->vdev);
 		return -ENOMEM;
@@ -1679,14 +1672,12 @@
 
 	/* Fill the video capture device struct */
 	*dev->vdev = au0828_video_template;
-	dev->vdev->vfl_type = VID_TYPE_CAPTURE | VID_TYPE_TUNER;
 	dev->vdev->parent = &dev->usbdev->dev;
 	strcpy(dev->vdev->name, "au0828a video");
 
 #ifdef VBI_NOT_YET_WORKING
 	/* Setup the VBI device */
 	*dev->vbi_dev = au0828_video_template;
-	dev->vbi_dev->vfl_type = VFL_TYPE_VBI;
 	dev->vbi_dev->parent = &dev->usbdev->dev;
 	strcpy(dev->vbi_dev->name, "au0828a vbi");
 #endif
@@ -1694,8 +1685,10 @@
 	list_add_tail(&dev->au0828list, &au0828_devlist);
 
 	/* Register the v4l2 device */
-	if((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1)) != 0) {
-		dprintk(1, "unable to register video device (error = %d).\n", retval);
+	retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1);
+	if (retval != 0) {
+		dprintk(1, "unable to register video device (error = %d).\n",
+			retval);
 		list_del(&dev->au0828list);
 		video_device_release(dev->vdev);
 		return -ENODEV;
@@ -1703,8 +1696,10 @@
 
 #ifdef VBI_NOT_YET_WORKING
 	/* Register the vbi device */
-	if((retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1)) != 0) {
-		dprintk(1, "unable to register vbi device (error = %d).\n", retval);
+	retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1);
+	if (retval != 0) {
+		dprintk(1, "unable to register vbi device (error = %d).\n",
+			retval);
 		list_del(&dev->au0828list);
 		video_device_release(dev->vbi_dev);
 		video_device_release(dev->vdev);
@@ -1712,7 +1707,7 @@
 	}
 #endif
 
-	dprintk(1, "%s completed!\n", __FUNCTION__);
+	dprintk(1, "%s completed!\n", __func__);
 
 	return 0;
 }
diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 876b18c..6d9bd454 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -54,16 +54,10 @@
 /* Defination for AU0828 USB transfer */
 #define AU0828_MAX_ISO_BUFS    12  /* maybe resize this value in the future */
 #define AU0828_ISO_PACKETS_PER_URB      10
-#define AU0828_ISO_MAX_FRAME_SIZE       (3 * 1024)
-#define AU0828_ISO_BUFFER_SIZE          (AU0828_ISO_PACKETS_PER_URB * AU0828_ISO_MAX_FRAME_SIZE)
 
 #define AU0828_MIN_BUF 4
 #define AU0828_DEF_BUF 8
 
-#define AU0828_MAX_IMAGES       10
-#define AU0828_FRAME_SIZE       (1028 * 1024 * 4)
-#define AU0828_URB_TIMEOUT      msecs_to_jiffies(AU0828_MAX_ISO_BUFS * AU0828_ISO_PACKETS_PER_URB)
-
 #define AU0828_MAX_INPUT        4
 
 enum au0828_itype {