[netdrvr] myri10ge, ixgbe: remove broken select INTEL_IOATDMA
We cannot select INTEL_IOATDMA in Kconfig as soon as MYRI10GE or IXGBE
is enabled since the former is not available on all architectures.
Just use a Kconfig bool {IXGBE,MYRI10GE}_DCA set to =y when DCA
support can actually be built.
[myri10ge portion written and signed-off-by] Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 6dce901..a9aebad 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -188,7 +188,7 @@
dma_addr_t fw_stats_bus;
int watchdog_tx_done;
int watchdog_tx_req;
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
int cached_dca_tag;
int cpu;
__be32 __iomem *dca_tag;
@@ -220,7 +220,7 @@
int msi_enabled;
int msix_enabled;
struct msix_entry *msix_vectors;
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
int dca_enabled;
#endif
u32 link_state;
@@ -902,7 +902,7 @@
struct myri10ge_slice_state *ss;
int i, status;
size_t bytes;
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
unsigned long dca_tag_off;
#endif
@@ -1012,7 +1012,7 @@
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
dca_tag_off = cmd.data0;
for (i = 0; i < mgp->num_slices; i++) {
@@ -1051,7 +1051,7 @@
return status;
}
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
static void
myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
{
@@ -1505,7 +1505,7 @@
struct net_device *netdev = ss->mgp->dev;
int work_done;
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
if (ss->mgp->dca_enabled)
myri10ge_update_dca(ss);
#endif
@@ -1736,7 +1736,7 @@
"tx_boundary", "WC", "irq", "MSI", "MSIX",
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
"serial_number", "watchdog_resets",
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
"dca_capable_firmware", "dca_device_present",
#endif
"link_changes", "link_up", "dropped_link_overflow",
@@ -1815,7 +1815,7 @@
data[i++] = (unsigned int)mgp->read_write_dma;
data[i++] = (unsigned int)mgp->serial_number;
data[i++] = (unsigned int)mgp->watchdog_resets;
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
data[i++] = (unsigned int)(mgp->dca_enabled);
#endif
@@ -3844,7 +3844,7 @@
dev_err(&pdev->dev, "failed reset\n");
goto abort_with_slices;
}
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
myri10ge_setup_dca(mgp);
#endif
pci_set_drvdata(pdev, mgp);
@@ -3948,7 +3948,7 @@
netdev = mgp->dev;
unregister_netdev(netdev);
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
myri10ge_teardown_dca(mgp);
#endif
myri10ge_dummy_rdma(mgp, 0);
@@ -3993,7 +3993,7 @@
#endif
};
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
static int
myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
{
@@ -4024,7 +4024,7 @@
myri10ge_driver.name, myri10ge_rss_hash);
myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
}
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
dca_register_notify(&myri10ge_dca_notifier);
#endif
if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
@@ -4037,7 +4037,7 @@
static __exit void myri10ge_cleanup_module(void)
{
-#if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
+#ifdef CONFIG_MYRI10GE_DCA
dca_unregister_notify(&myri10ge_dca_notifier);
#endif
pci_unregister_driver(&myri10ge_driver);
