diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt
new file mode 100644
index 0000000..9aef710
--- /dev/null
+++ b/Documentation/sh/clk.txt
@@ -0,0 +1,32 @@
+Clock framework on SuperH architecture
+
+The framework on SH extends existing API by the function clk_set_rate_ex,
+which prototype is as follows:
+
+    clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
+
+The algo_id parameter is used to specify algorithm used to recalculate clocks,
+adjanced to clock, specified as first argument. It is assumed that algo_id==0
+means no changes to adjanced clock
+
+Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
+if it is present in ops structure. The method should set the clock rate and adjust
+all needed clocks according to the passed algo_id.
+Exact values for algo_id are machine-dependend. For the sh7722, the following
+values are defined:
+
+	NO_CHANGE	= 0,
+	IUS_N1_N1,	/* I:U = N:1, U:Sh = N:1 */
+	IUS_322,	/* I:U:Sh = 3:2:2	 */
+	IUS_522,	/* I:U:Sh = 5:2:2 	 */
+	IUS_N11,	/* I:U:Sh = N:1:1	 */
+	SB_N1,		/* Sh:B = N:1		 */
+	SB3_N1,		/* Sh:B3 = N:1		 */
+	SB3_32,		/* Sh:B3 = 3:2		 */
+	SB3_43,		/* Sh:B3 = 4:3		 */
+	SB3_54,		/* Sh:B3 = 5:4		 */
+	BP_N1,		/* B:P	 = N:1		 */
+	IP_N1		/* I:P	 = N:1		 */
+
+Each of these constants means relation between clocks that can be set via the FRQCR
+register
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index d43aa9d..ba328f2 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -1,6 +1,6 @@
 Linux Magic System Request Key Hacks
 Documentation for sysrq.c
-Last update: 2007-JAN-06
+Last update: 2007-MAR-14
 
 *  What is the magic SysRq key?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -75,7 +75,7 @@
 
 'f'	- Will call oom_kill to kill a memory hog process.
 
-'g'	- Used by kgdb on ppc platforms.
+'g'	- Used by kgdb on ppc and sh platforms.
 
 'h'     - Will display help (actually any other key than those listed
           above will display help. but 'h' is easy to remember :-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 4d16d89..d74eb12 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -22,6 +22,10 @@
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
 config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
@@ -88,6 +92,14 @@
 	  Select SolutionEngine if configuring for a Hitachi SH7709
 	  or SH7750 evaluation board.
 
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	select CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
 config SH_7751_SOLUTION_ENGINE
 	bool "SolutionEngine7751"
 	select SOLUTION_ENGINE
@@ -95,6 +107,14 @@
 	help
 	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
 	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
 
 config SH_7300_SOLUTION_ENGINE
 	bool "SolutionEngine7300"
@@ -193,12 +213,8 @@
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
-config SH_R7780RP
-	bool "R7780RP-1"
-	select CPU_SUBTYPE_SH7780
-	help
-	  Select R7780RP-1 if configuring for a Renesas Solutions
-	  HIGHLANDER board.
+config SH_HIGHLANDER
+	bool "Highlander"
 
 config SH_EDOSK7705
 	bool "EDOSK7705"
@@ -243,6 +259,12 @@
 	help
 	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 	  evaluation board.
+	
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	select CPU_SUBTYPE_SH7751R
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 
 config SH_UNKNOWN
 	bool "BareCPU"
@@ -258,6 +280,10 @@
 
 endchoice
 
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
+
 source "arch/sh/mm/Kconfig"
 
 config CF_ENABLER
@@ -366,6 +392,16 @@
 	  Selecting this option will enable an in-kernel API for manipulating
 	  the store queues integrated in the SH-4 processors.
 
+config SPECULATIVE_EXECUTION
+	bool "Speculative subroutine return"
+	depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL
+	help
+	  This enables support for a speculative instruction fetch for
+	  subroutine return. There are various pitfalls associated with
+	  this, as outlined in the SH7780 hardware manual.
+
+	  If unsure, say N.
+
 config CPU_HAS_INTEVT
 	bool
 
@@ -398,8 +434,9 @@
 
 endmenu
 
-menu "Timer support"
-depends on !GENERIC_TIME
+menu "Timer and clock configuration"
+
+if !GENERIC_TIME
 
 config SH_TMU
 	bool "TMU timer support"
@@ -422,17 +459,11 @@
 	help
 	  This enables the use of the MTU2 as the system timer.
 
-endmenu
-
-source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
+endif
 
 config SH_TIMER_IRQ
 	int
-	default "28" if CPU_SUBTYPE_SH7780
+	default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
 	default "16"
@@ -462,7 +493,8 @@
 	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7206
-	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
+	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
+			      CPU_SUBTYPE_SH7785
 	default "60000000" if CPU_SUBTYPE_SH7751
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	help
@@ -477,6 +509,8 @@
 	help
 	  MD2 - MD0 pin setting.
 
+endmenu
+
 menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
@@ -495,21 +529,6 @@
 
 endmenu
 
-source "arch/sh/drivers/dma/Kconfig"
-
-source "arch/sh/cchips/Kconfig"
-
-config HEARTBEAT
-	bool "Heartbeat LED"
-	depends on SH_MPC1211 || SH_SH03 || \
-		   SOLUTION_ENGINE || \
-		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
-		   SH_R7780RP
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
 source "arch/sh/drivers/Kconfig"
 
 endmenu
@@ -540,6 +559,20 @@
 	  support.  As of this writing the exact hardware interface is
 	  strongly in flux, so no good recommendation can be made.
 
+config CRASH_DUMP
+	bool "kernel crash dumps (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  Generate crash dump after being started by kexec.
+	  This should be normally only set in special crash dump kernels
+	  which are loaded in the main kernel with kexec-tools into
+	  a specially reserved region and then later executed after
+	  a crash by kdump/kexec. The crash dump kernel must be compiled
+	  to a memory address not used by the main kernel using
+	  MEMORY_START.
+
+	  For more details see Documentation/kdump/kdump.txt
+
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 87902e0..b563072 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -33,6 +33,7 @@
 	default "0xffe00000" if CPU_SUBTYPE_SH7780
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206
 	default "0xf8420000" if CPU_SUBTYPE_SH7619
+	default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
 	default "0xffe80000" if CPU_SH4
 
 config EARLY_PRINTK
@@ -77,16 +78,17 @@
 	  on the VM subsystem for higher order allocations. This option
 	  will also use IRQ stacks to compensate for the reduced stackspace.
 
-config KGDB
+config SH_KGDB
 	bool "Include KGDB kernel debugger"
 	select FRAME_POINTER
+	select DEBUG_INFO
 	help
 	  Include in-kernel hooks for kgdb, the Linux kernel source level
 	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
 	  Unless you are intending to debug the kernel, say N here.
 
 menu "KGDB configuration options"
-	depends on KGDB
+	depends on SH_KGDB
 
 config MORE_COMPILE_OPTIONS
 	bool "Add any additional compile options"
@@ -103,22 +105,16 @@
 	bool "Enter KGDB on NMI"
 	default n
 
-config KGDB_THREAD
-	bool "Include KGDB thread support"
-	default y
-
 config SH_KGDB_CONSOLE
 	bool "Console messages through GDB"
+	depends on !SERIAL_SH_SCI_CONSOLE
+	select SERIAL_CORE_CONSOLE
 	default n
 
 config KGDB_SYSRQ
 	bool "Allow SysRq 'G' to enter KGDB"
 	default y
 
-config KGDB_KERNEL_ASSERTS
-	bool "Include KGDB kernel assertions"
-	default n
-
 comment "Serial port setup"
 
 config KGDB_DEFPORT
@@ -131,7 +127,7 @@
 
 choice
 	prompt "Parity"
-	depends on KGDB
+	depends on SH_KGDB
 	default KGDB_DEFPARITY_N
 
 config KGDB_DEFPARITY_N
@@ -147,7 +143,7 @@
 
 choice
 	prompt "Data bits"
-	depends on KGDB
+	depends on SH_KGDB
 	default KGDB_DEFBITS_8
 
 config KGDB_DEFBITS_8
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index bd9b172..7b11224 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -47,7 +47,6 @@
 cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
 
 cflags-$(CONFIG_SH_DSP)			+= -Wa,-dsp
-cflags-$(CONFIG_SH_KGDB)		+= -g
 
 cflags-$(CONFIG_MORE_COMPILE_OPTIONS)	+= \
 	$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
@@ -89,7 +88,9 @@
 
 # Boards
 machdir-$(CONFIG_SH_SOLUTION_ENGINE)		:= se/770x
+machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	:= se/7722
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	:= se/7751
+machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	:= se/7780
 machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	:= se/7343
 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180
@@ -103,7 +104,7 @@
 machdir-$(CONFIG_SH_RTS7751R2D)			:= renesas/rts7751r2d
 machdir-$(CONFIG_SH_7751_SYSTEMH)		:= renesas/systemh
 machdir-$(CONFIG_SH_EDOSK7705)			:= renesas/edosk7705
-machdir-$(CONFIG_SH_R7780RP)			:= renesas/r7780rp
+machdir-$(CONFIG_SH_HIGHLANDER)			:= renesas/r7780rp
 machdir-$(CONFIG_SH_7710VOIPGW)			:= renesas/sh7710voipgw
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		:= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			:= landisk
@@ -111,6 +112,7 @@
 machdir-$(CONFIG_SH_SHMIN)			:= shmin
 machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= se/7206
 machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= se/7619
+machdir-$(CONFIG_SH_LBOX_RE2)			:= lboxre2
 machdir-$(CONFIG_SH_UNKNOWN)			:= unknown
 
 incdir-y			:= $(notdir $(machdir-y))
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile
index ff1b7f5..b312427 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/hp6xx/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the HP6xx specific parts of the kernel
 #
 
-obj-y	 		:= setup.o
+obj-y			:= setup.o
 obj-$(CONFIG_PM)	+= pm.o pm_wakeup.o
-obj-$(CONFIG_APM)	+= hp6xx_apm.o
+obj-$(CONFIG_APM_EMULATION)	+= hp6xx_apm.o
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
index b5a9664..6aeee85 100644
--- a/arch/sh/boards/hp6xx/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -2,6 +2,7 @@
  * linux/arch/sh/boards/hp6xx/setup.c
  *
  * Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
  *
  * May be copied or modified under the terms of the GNU General Public
  * License.  See linux/COPYING for more information.
@@ -10,6 +11,7 @@
  */
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/hd64461.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -19,6 +21,40 @@
 #define	SCPCR	0xa4000116
 #define SCPDR	0xa4000136
 
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start = 0x15000000 + 0x1f0,
+		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 0x15000000 + 0x1fe,
+		.end   = 0x15000000 + 0x1fe + 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = 93,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		=  "pata_platform",
+	.id		=  -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+       &cf_ide_device,
+};
+
+static int __init hp6xx_devices_setup(void)
+{
+	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
 static void __init hp6xx_setup(char **cmdline_p)
 {
 	u8 v8;
@@ -60,41 +96,12 @@
 	v |= SCPCR_TS_ENABLE;
 	ctrl_outw(v, SCPCR);
 }
+device_initcall(hp6xx_devices_setup);
 
-/*
- * XXX: This is stupid, we should have a generic machine vector for the cchips
- * and just wrap the platform setup code in to this, as it's the only thing
- * that ends up being different.
- */
 struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_name = "hp6xx",
 	.mv_setup = hp6xx_setup,
 	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
-
-	.mv_inb = hd64461_inb,
-	.mv_inw = hd64461_inw,
-	.mv_inl = hd64461_inl,
-	.mv_outb = hd64461_outb,
-	.mv_outw = hd64461_outw,
-	.mv_outl = hd64461_outl,
-
-	.mv_inb_p = hd64461_inb_p,
-	.mv_inw_p = hd64461_inw,
-	.mv_inl_p = hd64461_inl,
-	.mv_outb_p = hd64461_outb_p,
-	.mv_outw_p = hd64461_outw,
-	.mv_outl_p = hd64461_outl,
-
-	.mv_insb = hd64461_insb,
-	.mv_insw = hd64461_insw,
-	.mv_insl = hd64461_insl,
-	.mv_outsb = hd64461_outsb,
-	.mv_outsw = hd64461_outsw,
-	.mv_outsl = hd64461_outsl,
-
-	.mv_readw = hd64461_readw,
-	.mv_writew = hd64461_writew,
-
 	.mv_irq_demux = hd64461_irq_demux,
 };
 ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/landisk/Makefile
index 89e4beb..a696b42 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/landisk/Makefile
@@ -2,4 +2,4 @@
 # Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
 #
 
-obj-y	 := setup.o io.o irq.o rtc.o landisk_pwb.o
+obj-y	 := setup.o irq.o psw.o gio.o
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
new file mode 100644
index 0000000..50d38be
--- /dev/null
+++ b/arch/sh/boards/landisk/gio.c
@@ -0,0 +1,167 @@
+/*
+ * arch/sh/boards/landisk/gio.c - driver for landisk
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ * LANDISK and USL-5P Button, LED and GIO driver drive function.
+ *
+ *   Copylight (C) 2006 kogiidena
+ *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kdev_t.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/landisk/gio.h>
+#include <asm/landisk/iodata_landisk.h>
+
+#define DEVCOUNT                4
+#define GIO_MINOR	        2	/* GIO minor no. */
+
+static dev_t dev;
+static struct cdev *cdev_p;
+static int openCnt;
+
+static int gio_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		if (openCnt > 0) {
+			return -EALREADY;
+		} else {
+			openCnt++;
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+static int gio_close(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		openCnt--;
+	}
+	return 0;
+}
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+			     unsigned int cmd, unsigned long arg)
+{
+	unsigned int data;
+	static unsigned int addr = 0;
+
+	if (cmd & 0x01) {	/* write */
+		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+
+	switch (cmd) {
+	case GIODRV_IOCSGIOSETADDR:	/* addres set */
+		addr = data;
+		break;
+
+	case GIODRV_IOCSGIODATA1:	/* write byte */
+		ctrl_outb((unsigned char)(0x0ff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA2:	/* write word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA4:	/* write long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		ctrl_outl(data, addr);
+		break;
+
+	case GIODRV_IOCGGIODATA1:	/* read byte */
+		data = ctrl_inb(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA2:	/* read word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		data = ctrl_inw(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA4:	/* read long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		data = ctrl_inl(addr);
+		break;
+	default:
+		return -EFAULT;
+		break;
+	}
+
+	if ((cmd & 0x01) == 0) {	/* read */
+		if (copy_to_user((int *)arg, &data, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+static struct file_operations gio_fops = {
+	.owner = THIS_MODULE,
+	.open = gio_open,	/* open */
+	.release = gio_close,	/* release */
+	.ioctl = gio_ioctl,	/* ioctl */
+};
+
+static int __init gio_init(void)
+{
+	int error;
+
+	printk(KERN_INFO "gio: driver initialized\n");
+
+	openCnt = 0;
+
+	if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
+		printk(KERN_ERR
+		       "gio: Couldn't alloc_chrdev_region, error=%d\n",
+		       error);
+		return 1;
+	}
+
+	cdev_p = cdev_alloc();
+	cdev_p->ops = &gio_fops;
+	error = cdev_add(cdev_p, dev, DEVCOUNT);
+	if (error) {
+		printk(KERN_ERR
+		       "gio: Couldn't cdev_add, error=%d\n", error);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __exit gio_exit(void)
+{
+	cdev_del(cdev_p);
+	unregister_chrdev_region(dev, DEVCOUNT);
+}
+
+module_init(gio_init);
+module_exit(gio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/landisk/io.c b/arch/sh/boards/landisk/io.c
deleted file mode 100644
index 92498b4..0000000
--- a/arch/sh/boards/landisk/io.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * arch/sh/boards/landisk/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for I-O Data Device, Inc. LANDISK.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_landisk.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-/*
- * modifed by kogiidena
- * 2005.03.03
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-extern void *area5_io_base;	/* Area 5 I/O Base address */
-extern void *area6_io_base;	/* Area 6 I/O Base address */
-
-static inline unsigned long port2adr(unsigned int port)
-{
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		if (port == 0x3f6)
-			return ((unsigned long)area5_io_base + 0x2c);
-		else
-			return ((unsigned long)area5_io_base + PA_PIDE_OFFSET +
-				((port - 0x1f0) << 1));
-	else if ((0x170 <= port && port < 0x178) || port == 0x376)
-		if (port == 0x376)
-			return ((unsigned long)area6_io_base + 0x2c);
-		else
-			return ((unsigned long)area6_io_base + PA_SIDE_OFFSET +
-				((port - 0x170) << 1));
-	else
-		maybebadio((unsigned long)port);
-
-	return port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-u8 landisk_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return ctrl_inb(port);
-	else if (is_pci_ioaddr(port))
-		return ctrl_inb(pci_ioaddr(port));
-
-	return ctrl_inw(port2adr(port)) & 0xff;
-}
-
-u8 landisk_inb_p(unsigned long port)
-{
-	u8 v;
-
-	if (PXSEG(port))
-		v = ctrl_inb(port);
-	else if (is_pci_ioaddr(port))
-		v = ctrl_inb(pci_ioaddr(port));
-	else
-		v = ctrl_inw(port2adr(port)) & 0xff;
-
-	ctrl_delay();
-
-	return v;
-}
-
-u16 landisk_inw(unsigned long port)
-{
-	if (PXSEG(port))
-		return ctrl_inw(port);
-	else if (is_pci_ioaddr(port))
-		return ctrl_inw(pci_ioaddr(port));
-	else
-		maybebadio(port);
-
-	return 0;
-}
-
-u32 landisk_inl(unsigned long port)
-{
-	if (PXSEG(port))
-		return ctrl_inl(port);
-	else if (is_pci_ioaddr(port))
-		return ctrl_inl(pci_ioaddr(port));
-	else
-		maybebadio(port);
-
-	return 0;
-}
-
-void landisk_outb(u8 value, unsigned long port)
-{
-	if (PXSEG(port))
-		ctrl_outb(value, port);
-	else if (is_pci_ioaddr(port))
-		ctrl_outb(value, pci_ioaddr(port));
-	else
-		ctrl_outw(value, port2adr(port));
-}
-
-void landisk_outb_p(u8 value, unsigned long port)
-{
-	if (PXSEG(port))
-		ctrl_outb(value, port);
-	else if (is_pci_ioaddr(port))
-		ctrl_outb(value, pci_ioaddr(port));
-	else
-		ctrl_outw(value, port2adr(port));
-	ctrl_delay();
-}
-
-void landisk_outw(u16 value, unsigned long port)
-{
-	if (PXSEG(port))
-		ctrl_outw(value, port);
-	else if (is_pci_ioaddr(port))
-		ctrl_outw(value, pci_ioaddr(port));
-	else
-		maybebadio(port);
-}
-
-void landisk_outl(u32 value, unsigned long port)
-{
-	if (PXSEG(port))
-		ctrl_outl(value, port);
-	else if (is_pci_ioaddr(port))
-		ctrl_outl(value, pci_ioaddr(port));
-	else
-		maybebadio(port);
-}
-
-void landisk_insb(unsigned long port, void *dst, unsigned long count)
-{
-        volatile u16 *p;
-        u8 *buf = dst;
-
-        if (PXSEG(port)) {
-                while (count--)
-                        *buf++ = *(volatile u8 *)port;
-	} else if (is_pci_ioaddr(port)) {
-                volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
-                while (count--)
-                        *buf++ = *bp;
-	} else {
-                p = (volatile u16 *)port2adr(port);
-                while (count--)
-                        *buf++ = *p & 0xff;
-	}
-}
-
-void landisk_insw(unsigned long port, void *dst, unsigned long count)
-{
-        volatile u16 *p;
-        u16 *buf = dst;
-
-	if (PXSEG(port))
-		p = (volatile u16 *)port;
-	else if (is_pci_ioaddr(port))
-		p = (volatile u16 *)pci_ioaddr(port);
-	else
-		p = (volatile u16 *)port2adr(port);
-	while (count--)
-		*buf++ = *p;
-}
-
-void landisk_insl(unsigned long port, void *dst, unsigned long count)
-{
-        u32 *buf = dst;
-
-	if (is_pci_ioaddr(port)) {
-                volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-
-                while (count--)
-                        *buf++ = *p;
-	} else
-		maybebadio(port);
-}
-
-void landisk_outsb(unsigned long port, const void *src, unsigned long count)
-{
-        volatile u16 *p;
-        const u8 *buf = src;
-
-	if (PXSEG(port))
-                while (count--)
-                        ctrl_outb(*buf++, port);
-	else if (is_pci_ioaddr(port)) {
-                volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
-                while (count--)
-                        *bp = *buf++;
-	} else {
-                p = (volatile u16 *)port2adr(port);
-                while (count--)
-                        *p = *buf++;
-	}
-}
-
-void landisk_outsw(unsigned long port, const void *src, unsigned long count)
-{
-        volatile u16 *p;
-        const u16 *buf = src;
-
-	if (PXSEG(port))
-                p = (volatile u16 *)port;
-	else if (is_pci_ioaddr(port))
-                p = (volatile u16 *)pci_ioaddr(port);
-	else
-                p = (volatile u16 *)port2adr(port);
-
-        while (count--)
-                *p = *buf++;
-}
-
-void landisk_outsl(unsigned long port, const void *src, unsigned long count)
-{
-        const u32 *buf = src;
-
-	if (is_pci_ioaddr(port)) {
-                volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-
-                while (count--)
-                        *p = *buf++;
-	} else
-		maybebadio(port);
-}
-
-void __iomem *landisk_ioport_map(unsigned long port, unsigned int size)
-{
-        if (PXSEG(port))
-                return (void __iomem *)port;
-        else if (is_pci_ioaddr(port))
-                return (void __iomem *)pci_ioaddr(port);
-
-        return (void __iomem *)port2adr(port);
-}
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
index 3eba6d0..2586494 100644
--- a/arch/sh/boards/landisk/irq.c
+++ b/arch/sh/boards/landisk/irq.c
@@ -1,18 +1,16 @@
 /*
  * arch/sh/boards/landisk/irq.c
  *
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ *
  * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
  * Based largely on io_se.c.
  *
- * I/O routine for I-O Data Device, Inc. LANDISK.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_landisk.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-/*
- * modified by kogiidena
- * 2005.03.03
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/init.h>
 #include <linux/irq.h>
@@ -20,71 +18,27 @@
 #include <linux/io.h>
 #include <asm/landisk/iodata_landisk.h>
 
-static void enable_landisk_irq(unsigned int irq);
-static void disable_landisk_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_landisk_irq disable_landisk_irq
-
-static void ack_landisk_irq(unsigned int irq);
-static void end_landisk_irq(unsigned int irq);
-
-static unsigned int startup_landisk_irq(unsigned int irq)
-{
-	enable_landisk_irq(irq);
-	return 0;		/* never anything pending */
-}
-
 static void disable_landisk_irq(unsigned int irq)
 {
-	unsigned char val;
 	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
 
-	/* Set the priority in IPR to 0 */
-	val = ctrl_inb(PA_IMASK);
-	val &= mask;
-	ctrl_outb(val, PA_IMASK);
+	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
 }
 
 static void enable_landisk_irq(unsigned int irq)
 {
-	unsigned char val;
 	unsigned char value = (0x01 << (irq - 5));
 
-	/* Set priority in IPR back to original value */
-	val = ctrl_inb(PA_IMASK);
-	val |= value;
-	ctrl_outb(val, PA_IMASK);
+	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
 }
 
-static void ack_landisk_irq(unsigned int irq)
-{
-	disable_landisk_irq(irq);
-}
-
-static void end_landisk_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_landisk_irq(irq);
-}
-
-static struct hw_interrupt_type landisk_irq_type = {
-	.typename = "LANDISK IRQ",
-	.startup = startup_landisk_irq,
-	.shutdown = shutdown_landisk_irq,
-	.enable = enable_landisk_irq,
-	.disable = disable_landisk_irq,
-	.ack = ack_landisk_irq,
-	.end = end_landisk_irq
+static struct irq_chip landisk_irq_chip __read_mostly = {
+	.name		= "LANDISK",
+	.mask		= disable_landisk_irq,
+	.unmask		= enable_landisk_irq,
+	.mask_ack	= disable_landisk_irq,
 };
 
-static void make_landisk_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &landisk_irq_type;
-	disable_landisk_irq(irq);
-}
-
 /*
  * Initialize IRQ setting
  */
@@ -92,6 +46,11 @@
 {
 	int i;
 
-	for (i = 5; i < 14; i++)
-		make_landisk_irq(i);
+	for (i = 5; i < 14; i++) {
+		disable_irq_nosync(i);
+		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
+					      handle_level_irq, "level");
+		enable_landisk_irq(i);
+	}
+	ctrl_outb(0x00, PA_PWRINT_CLR);
 }
diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c
deleted file mode 100644
index 47a63c6..0000000
--- a/arch/sh/boards/landisk/landisk_pwb.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * arch/sh/boards/landisk/landisk_pwb.c -- driver for the Power control switch.
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- *
- * LED control drive function added by kogiidena
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/major.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/landisk/iodata_landisk.h>
-
-#define SHUTDOWN_BTN_MINOR	1	/* Shutdown button device minor no. */
-#define LED_MINOR	       21	/* LED minor no. */
-#define BTN_MINOR	       22	/* BUTTON minor no. */
-#define GIO_MINOR	       40	/* GIO minor no. */
-
-static int openCnt;
-static int openCntLED;
-static int openCntGio;
-static int openCntBtn;
-static int landisk_btn;
-static int landisk_btnctrlpid;
-/*
- * Functions prototypes
- */
-
-static int gio_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-		     unsigned long arg);
-
-static int swdrv_open(struct inode *inode, struct file *filp)
-{
-	int minor;
-
-	minor = MINOR(inode->i_rdev);
-	filp->private_data = (void *)minor;
-
-	if (minor == SHUTDOWN_BTN_MINOR) {
-		if (openCnt > 0) {
-			return -EALREADY;
-		} else {
-			openCnt++;
-			return 0;
-		}
-	} else if (minor == LED_MINOR) {
-		if (openCntLED > 0) {
-			return -EALREADY;
-		} else {
-			openCntLED++;
-			return 0;
-		}
-	} else if (minor == BTN_MINOR) {
-		if (openCntBtn > 0) {
-			return -EALREADY;
-		} else {
-			openCntBtn++;
-			return 0;
-		}
-	} else if (minor == GIO_MINOR) {
-		if (openCntGio > 0) {
-			return -EALREADY;
-		} else {
-			openCntGio++;
-			return 0;
-		}
-	}
-	return -ENOENT;
-
-}
-
-static int swdrv_close(struct inode *inode, struct file *filp)
-{
-	int minor;
-
-	minor = MINOR(inode->i_rdev);
-	if (minor == SHUTDOWN_BTN_MINOR) {
-		openCnt--;
-	} else if (minor == LED_MINOR) {
-		openCntLED--;
-	} else if (minor == BTN_MINOR) {
-		openCntBtn--;
-	} else if (minor == GIO_MINOR) {
-		openCntGio--;
-	}
-	return 0;
-}
-
-static int swdrv_read(struct file *filp, char *buff, size_t count,
-		      loff_t * ppos)
-{
-	int minor;
-	minor = (int)(filp->private_data);
-
-	if (!access_ok(VERIFY_WRITE, (void *)buff, count))
-		return -EFAULT;
-
-	if (minor == SHUTDOWN_BTN_MINOR) {
-		if (landisk_btn & 0x10) {
-			put_user(1, buff);
-			return 1;
-		} else {
-			return 0;
-		}
-	}
-	return 0;
-}
-
-static int swdrv_write(struct file *filp, const char *buff, size_t count,
-		       loff_t * ppos)
-{
-	int minor;
-	minor = (int)(filp->private_data);
-
-	if (minor == SHUTDOWN_BTN_MINOR) {
-		return count;
-	}
-	return count;
-}
-
-static irqreturn_t sw_interrupt(int irq, void *dev_id)
-{
-	landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS)));
-	disable_irq(IRQ_BUTTON);
-	disable_irq(IRQ_POWER);
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-
-	if (landisk_btnctrlpid != 0) {
-		kill_proc(landisk_btnctrlpid, SIGUSR1, 1);
-		landisk_btnctrlpid = 0;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static const struct file_operations swdrv_fops = {
-	.read = swdrv_read,	/* read */
-	.write = swdrv_write,	/* write */
-	.open = swdrv_open,	/* open */
-	.release = swdrv_close,	/* release */
-	.ioctl = gio_ioctl,	/* ioctl */
-
-};
-
-static char banner[] __initdata =
-    KERN_INFO "LANDISK and USL-5P Button, LED and GIO driver initialized\n";
-
-int __init swdrv_init(void)
-{
-	int error;
-
-	printk("%s", banner);
-
-	openCnt = 0;
-	openCntLED = 0;
-	openCntBtn = 0;
-	openCntGio = 0;
-	landisk_btn = 0;
-	landisk_btnctrlpid = 0;
-
-	if ((error = register_chrdev(SHUTDOWN_BTN_MAJOR, "swdrv", &swdrv_fops))) {
-		printk(KERN_ERR
-		       "Button, LED and GIO driver:Couldn't register driver, error=%d\n",
-		       error);
-		return 1;
-	}
-
-	if (request_irq(IRQ_POWER, sw_interrupt, 0, "SHUTDOWNSWITCH", NULL)) {
-		printk(KERN_ERR "Unable to get IRQ 11.\n");
-		return 1;
-	}
-	if (request_irq(IRQ_BUTTON, sw_interrupt, 0, "USL-5P BUTTON", NULL)) {
-		printk(KERN_ERR "Unable to get IRQ 12.\n");
-		return 1;
-	}
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-
-	return 0;
-}
-
-module_init(swdrv_init);
-
-/*
- * gio driver
- *
- */
-
-#include <asm/landisk/gio.h>
-
-static int gio_ioctl(struct inode *inode, struct file *filp,
-		     unsigned int cmd, unsigned long arg)
-{
-	int minor;
-	unsigned int data, mask;
-	static unsigned int addr = 0;
-
-	minor = (int)(filp->private_data);
-
-	/* access control */
-	if (minor == GIO_MINOR) {
-		;
-	} else if (minor == LED_MINOR) {
-		if (((cmd & 0x0ff) >= 9) && ((cmd & 0x0ff) < 20)) {
-			;
-		} else {
-			return -EINVAL;
-		}
-	} else if (minor == BTN_MINOR) {
-		if (((cmd & 0x0ff) >= 20) && ((cmd & 0x0ff) < 30)) {
-			;
-		} else {
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-	if (cmd & 0x01) {	/* write */
-		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
-			return -EFAULT;
-		}
-	}
-
-	switch (cmd) {
-	case GIODRV_IOCSGIOSETADDR:	/* addres set */
-		addr = data;
-		break;
-
-	case GIODRV_IOCSGIODATA1:	/* write byte */
-		ctrl_outb((unsigned char)(0x0ff & data), addr);
-		break;
-
-	case GIODRV_IOCSGIODATA2:	/* write word */
-		if (addr & 0x01) {
-			return -EFAULT;
-		}
-		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
-		break;
-
-	case GIODRV_IOCSGIODATA4:	/* write long */
-		if (addr & 0x03) {
-			return -EFAULT;
-		}
-		ctrl_outl(data, addr);
-		break;
-
-	case GIODRV_IOCGGIODATA1:	/* read byte */
-		data = ctrl_inb(addr);
-		break;
-
-	case GIODRV_IOCGGIODATA2:	/* read word */
-		if (addr & 0x01) {
-			return -EFAULT;
-		}
-		data = ctrl_inw(addr);
-		break;
-
-	case GIODRV_IOCGGIODATA4:	/* read long */
-		if (addr & 0x03) {
-			return -EFAULT;
-		}
-		data = ctrl_inl(addr);
-		break;
-	case GIODRV_IOCSGIO_LED:	/* write */
-		mask = ((data & 0x00ffffff) << 8)
-		    | ((data & 0x0000ffff) << 16)
-		    | ((data & 0x000000ff) << 24);
-		landisk_ledparam = data & (~mask);
-		if (landisk_arch == 0) {	/* arch == landisk */
-			landisk_ledparam &= 0x03030303;
-			mask = (~(landisk_ledparam >> 22)) & 0x000c;
-			landisk_ledparam |= mask;
-		} else {	                /* arch == usl-5p */
-			mask = (landisk_ledparam >> 24) & 0x0001;
-			landisk_ledparam |= mask;
-			landisk_ledparam &= 0x007f7f7f;
-		}
-		landisk_ledparam |= 0x80;
-		break;
-	case GIODRV_IOCGGIO_LED:	/* read */
-		data = landisk_ledparam;
-		if (landisk_arch == 0) {	/* arch == landisk */
-			data &= 0x03030303;
-		} else {	                /* arch == usl-5p */
-			;
-		}
-		data &= (~0x080);
-		break;
-	case GIODRV_IOCSGIO_BUZZER:	/* write */
-		landisk_buzzerparam = data;
-		landisk_ledparam |= 0x80;
-		break;
-	case GIODRV_IOCGGIO_LANDISK:	/* read */
-		data = landisk_arch & 0x01;
-		break;
-	case GIODRV_IOCGGIO_BTN:	/* read */
-		data = (0x0ff & ctrl_inb(PA_PWRINT_CLR));
-		data <<= 8;
-		data |= (0x0ff & ctrl_inb(PA_IMASK));
-		data <<= 8;
-		data |= (0x0ff & landisk_btn);
-		data <<= 8;
-		data |= (0x0ff & (~ctrl_inb(PA_STATUS)));
-		break;
-	case GIODRV_IOCSGIO_BTNPID:	/* write */
-		landisk_btnctrlpid = data;
-		landisk_btn = 0;
-		if (irq_desc[IRQ_BUTTON].depth) {
-			enable_irq(IRQ_BUTTON);
-		}
-		if (irq_desc[IRQ_POWER].depth) {
-			enable_irq(IRQ_POWER);
-		}
-		break;
-	case GIODRV_IOCGGIO_BTNPID:	/* read */
-		data = landisk_btnctrlpid;
-		break;
-	default:
-		return -EFAULT;
-		break;
-	}
-
-	if ((cmd & 0x01) == 0) {	/* read */
-		if (copy_to_user((int *)arg, &data, sizeof(int))) {
-			return -EFAULT;
-		}
-	}
-	return 0;
-}
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c
new file mode 100644
index 0000000..5a9b70b
--- /dev/null
+++ b/arch/sh/boards/landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007  Paul Mundt
+ * Copyright (C) 2007  kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/landisk/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int sw_value;
+	int ret = 0;
+
+	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	/* Figure out who raised it */
+	if (sw_value & (1 << psw_info->bit)) {
+		psw->state = 1;
+		mod_timer(&psw->debounce, jiffies + 50);
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+	[0] = {
+		.start = IRQ_POWER,
+		.flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource psw_usl5p_resources[] = {
+	[0] = {
+		.start = IRQ_BUTTON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+	.name		= "psw_power",
+	.bit		= 4,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+	.name		= "psw1",
+	.bit		= 0,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+	.name		= "psw2",
+	.bit		= 2,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+	.name		= "psw3",
+	.bit		= 1,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_power_resources),
+	.resource	= psw_power_resources,
+	.dev		= {
+		.platform_data = &psw_power_platform_data,
+	},
+};
+
+static struct platform_device psw1_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw1_platform_data,
+	},
+};
+
+static struct platform_device psw2_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw2_platform_data,
+	},
+};
+
+static struct platform_device psw3_switch_device = {
+	.name		= "push-switch",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev = {
+		.platform_data = &psw3_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&psw_power_switch_device,
+	&psw1_switch_device,
+	&psw2_switch_device,
+	&psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/landisk/rtc.c b/arch/sh/boards/landisk/rtc.c
deleted file mode 100644
index 0a9a2a2..0000000
--- a/arch/sh/boards/landisk/rtc.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/sh/boards/landisk/rtc.c --  RTC support
- *
- *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- */
-/*
- * modifed by kogiidena
- * 2005.09.16
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/bcd.h>
-#include <asm/rtc.h>
-
-extern spinlock_t rtc_lock;
-
-extern void
-rs5c313_set_cmos_time(unsigned int BCD_yr, unsigned int BCD_mon,
-		      unsigned int BCD_day, unsigned int BCD_hr,
-		      unsigned int BCD_min, unsigned int BCD_sec);
-
-extern unsigned long
-rs5c313_get_cmos_time(unsigned int *BCD_yr, unsigned int *BCD_mon,
-		      unsigned int *BCD_day, unsigned int *BCD_hr,
-		      unsigned int *BCD_min, unsigned int *BCD_sec);
-
-void landisk_rtc_gettimeofday(struct timespec *tv)
-{
-	unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	tv->tv_sec = rs5c313_get_cmos_time
-	    (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
-	tv->tv_nsec = 0;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-}
-
-int landisk_rtc_settimeofday(const time_t secs)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned long flags;
-	unsigned long nowtime = secs;
-	unsigned int BCD_yr, BCD_mon, BCD_day, BCD_hr, BCD_min, BCD_sec;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-
-	rs5c313_get_cmos_time
-	  (&BCD_yr, &BCD_mon, &BCD_day, &BCD_hr, &BCD_min, &BCD_sec);
-	cmos_minutes = BCD_min;
-	BCD_TO_BIN(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
-		real_minutes += 30;	/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		BIN_TO_BCD(real_seconds);
-		BIN_TO_BCD(real_minutes);
-		rs5c313_set_cmos_time(BCD_yr, BCD_mon, BCD_day, BCD_hr,
-				      real_minutes, real_seconds);
-	} else {
-		printk(KERN_WARNING
-		       "set_rtc_time: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	return retval;
-}
-
-void landisk_time_init(void)
-{
-	rtc_sh_get_time = landisk_rtc_gettimeofday;
-	rtc_sh_set_time = landisk_rtc_settimeofday;
-}
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
index 122d699..a83a5d9 100644
--- a/arch/sh/boards/landisk/setup.c
+++ b/arch/sh/boards/landisk/setup.c
@@ -1,144 +1,90 @@
 /*
  * arch/sh/boards/landisk/setup.c
  *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- *
  * I-O DATA Device, Inc. LANDISK Support.
  *
- * Modified for LANDISK by
- * Atom Create Engineering Co., Ltd. 2002.
- *
- * modifed by kogiidena
- * 2005.09.16
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
 #include <linux/pm.h>
 #include <linux/mm.h>
 #include <asm/machvec.h>
-#include <asm/rtc.h>
 #include <asm/landisk/iodata_landisk.h>
 #include <asm/io.h>
 
-void landisk_time_init(void);
 void init_landisk_IRQ(void);
 
-int landisk_ledparam;
-int landisk_buzzerparam;
-int landisk_arch;
-
-/* cycle the led's in the clasic knightrider/sun pattern */
-static void heartbeat_landisk(void)
-{
-	static unsigned int cnt = 0, blink = 0x00, period = 25;
-        volatile u8 *p = (volatile u8 *)PA_LED;
-	char data;
-
-        if ((landisk_ledparam & 0x080) == 0)
-		return;
-
-	cnt += 1;
-
-        if (cnt < period)
-		return;
-
-	cnt = 0;
-	blink++;
-
-	data = (blink & 0x01) ? (landisk_ledparam >> 16) : 0;
-	data |= (blink & 0x02) ? (landisk_ledparam >> 8) : 0;
-	data |= landisk_ledparam;
-
-	/* buzzer */
-	if (landisk_buzzerparam & 0x1) {
-		data |= 0x80;
-	} else {
-		data &= 0x7f;
-	}
-	*p = data;
-
-        if (((landisk_ledparam & 0x007f7f00) == 0) &&
-             (landisk_buzzerparam == 0))
-		landisk_ledparam &= (~0x0080);
-
-	landisk_buzzerparam >>= 1;
-}
-
 static void landisk_power_off(void)
 {
         ctrl_outb(0x01, PA_SHUTDOWN);
 }
 
-static void check_usl5p(void)
-{
-        volatile u8 *p = (volatile u8 *)PA_LED;
-        u8 tmp1, tmp2;
+static struct resource cf_ide_resources[3];
 
-        tmp1 = *p;
-        *p = 0x40;
-        tmp2 = *p;
-        *p = tmp1;
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
 
-        landisk_arch = (tmp2 == 0x40);
-        if (landisk_arch == 1) {
-                /* arch == usl-5p */
-                landisk_ledparam = 0x00000380;
-                landisk_ledparam |= (tmp1 & 0x07c);
-        } else {
-                /* arch == landisk */
-                landisk_ledparam = 0x02000180;
-                landisk_ledparam |= 0x04;
-        }
-}
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev		= {
+		.platform_data = &pata_info,
+	},
+};
 
-void *area5_io_base;
-void *area6_io_base;
+static struct platform_device *landisk_devices[] __initdata = {
+	&cf_ide_device,
+};
 
-static int __init landisk_cf_init(void)
+static int __init landisk_devices_setup(void)
 {
 	pgprot_t prot;
-	unsigned long paddrbase, psize;
+	unsigned long paddrbase;
+	void *cf_ide_base;
 
 	/* open I/O area window */
 	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
-	psize = PAGE_SIZE;
 	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
-	area5_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
-	if (!area5_io_base) {
+	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	if (!cf_ide_base) {
 		printk("allocate_cf_area : can't open CF I/O window!\n");
 		return -ENOMEM;
 	}
 
-	paddrbase = virt_to_phys((void *)PA_AREA6_IO);
-	psize = PAGE_SIZE;
-	prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16);
-	area6_io_base = p3_ioremap(paddrbase, psize, prot.pgprot);
-	if (!area6_io_base) {
-		printk("allocate_cf_area : can't open HDD I/O window!\n");
-		return -ENOMEM;
-	}
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+	cf_ide_resources[0].flags = IORESOURCE_IO;
+	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
+	cf_ide_resources[1].flags = IORESOURCE_IO;
+	cf_ide_resources[2].start = IRQ_FATA;
+	cf_ide_resources[2].flags = IORESOURCE_IRQ;
 
-	printk(KERN_INFO "Allocate Area5/6 success.\n");
-
-	/* XXX : do we need attribute and common-memory area also? */
-
-	return 0;
+	return platform_add_devices(landisk_devices,
+				    ARRAY_SIZE(landisk_devices));
 }
 
+__initcall(landisk_devices_setup);
+
 static void __init landisk_setup(char **cmdline_p)
 {
-	device_initcall(landisk_cf_init);
-
-	landisk_buzzerparam = 0;
-	check_usl5p();
+        /* LED ON */
+	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
 
 	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
-
-	board_time_init = landisk_time_init;
 	pm_power_off = landisk_power_off;
 }
 
@@ -148,29 +94,6 @@
 struct sh_machine_vector mv_landisk __initmv = {
 	.mv_name = "LANDISK",
 	.mv_setup = landisk_setup,
-	.mv_nr_irqs = 72,
-	.mv_inb = landisk_inb,
-	.mv_inw = landisk_inw,
-	.mv_inl = landisk_inl,
-	.mv_outb = landisk_outb,
-	.mv_outw = landisk_outw,
-	.mv_outl = landisk_outl,
-	.mv_inb_p = landisk_inb_p,
-	.mv_inw_p = landisk_inw,
-	.mv_inl_p = landisk_inl,
-	.mv_outb_p = landisk_outb_p,
-	.mv_outw_p = landisk_outw,
-	.mv_outl_p = landisk_outl,
-	.mv_insb = landisk_insb,
-	.mv_insw = landisk_insw,
-	.mv_insl = landisk_insl,
-	.mv_outsb = landisk_outsb,
-	.mv_outsw = landisk_outsw,
-	.mv_outsl = landisk_outsl,
-	.mv_ioport_map = landisk_ioport_map,
 	.mv_init_irq = init_landisk_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat = heartbeat_landisk,
-#endif
 };
 ALIAS_MV(landisk)
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/lboxre2/Makefile
new file mode 100644
index 0000000..e9ed140
--- /dev/null
+++ b/arch/sh/boards/lboxre2/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the L-BOX RE2 specific parts of the kernel
+# Copyright (c) 2007 Nobuhiro Iwamatsu
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/lboxre2/irq.c
new file mode 100644
index 0000000..5a1c3bb
--- /dev/null
+++ b/arch/sh/boards/lboxre2/irq.c
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/sh/boards/lboxre2/irq.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/lboxre2.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_lboxre2_IRQ(void)
+{
+	make_imask_irq(IRQ_CF1);
+	make_imask_irq(IRQ_CF0);
+	make_imask_irq(IRQ_INTD);
+	make_imask_irq(IRQ_ETH1);
+	make_imask_irq(IRQ_ETH0);
+	make_imask_irq(IRQ_INTA);
+}
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/lboxre2/setup.c
new file mode 100644
index 0000000..4e20f7c
--- /dev/null
+++ b/arch/sh/boards/lboxre2/setup.c
@@ -0,0 +1,85 @@
+/*
+ * linux/arch/sh/boards/lbox/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
+#include <asm/machvec.h>
+#include <asm/addrspace.h>
+#include <asm/lboxre2.h>
+#include <asm/io.h>
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = 0x1f0,
+		.end    = 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = 0x1f0 + 0x206,
+		.end    = 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = IRQ_CF0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct platform_device *lboxre2_devices[] __initdata = {
+       &cf_ide_device,
+};
+
+static int __init lboxre2_devices_setup(void)
+{
+	u32 cf0_io_base;	/* Boot CF base address */
+	pgprot_t prot;
+	unsigned long paddrbase, psize;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void*)PA_AREA5_IO);
+	psize = PAGE_SIZE;
+	prot = PAGE_KERNEL_PCC( 1 , _PAGE_PCC_IO16);
+	cf0_io_base = (u32)p3_ioremap(paddrbase, psize, prot.pgprot);
+	if (!cf0_io_base) {
+		printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
+		return -ENOMEM;
+	}
+
+	cf_ide_resources[0].start += cf0_io_base ;
+	cf_ide_resources[0].end   += cf0_io_base ;
+	cf_ide_resources[1].start += cf0_io_base ;
+	cf_ide_resources[1].end   += cf0_io_base ;
+
+	return platform_add_devices(lboxre2_devices,
+			ARRAY_SIZE(lboxre2_devices));
+
+}
+device_initcall(lboxre2_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_lboxre2 __initmv = {
+	.mv_name		= "L-BOX RE2",
+	.mv_nr_irqs		= 72,
+	.mv_init_irq		= init_lboxre2_IRQ,
+};
+ALIAS_MV(lboxre2)
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/renesas/r7780rp/Kconfig
index c26d981..9fb1164 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/renesas/r7780rp/Kconfig
@@ -1,14 +1,24 @@
-if SH_R7780RP
+if SH_HIGHLANDER
 
-menu "R7780RP options"
+choice
+	prompt "Highlander options"
+	default SH_R7780MP
+
+config SH_R7780RP
+	bool "R7780RP-1 board support"
+	select CPU_SUBTYPE_SH7780
 
 config SH_R7780MP
 	bool "R7780MP board support"
-	default y
+	select CPU_SUBTYPE_SH7780
 	help
 	  Selecting this option will enable support for the mass-production
 	  version of the R7780RP. If in doubt, say Y.
 
-endmenu
+config SH_R7785RP
+	bool "R7785RP board support"
+	select CPU_SUBTYPE_SH7785
+
+endchoice
 
 endif
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
index ed5f5a9..609e5d5 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the R7780RP-1 specific parts of the kernel
 #
-
-obj-y	 := setup.o irq.o
-
+irqinit-y			:= irq-r7780rp.o
+irqinit-$(CONFIG_SH_R7785RP)	:= irq-r7785rp.o
 obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
+obj-y	 			:= setup.o irq.o $(irqinit-y)
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
new file mode 100644
index 0000000..f5f3587
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
@@ -0,0 +1,21 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/r7780rp.h>
+
+void __init highlander_init_irq(void)
+{
+	int i;
+
+	for (i = 0; i < 15; i++)
+		make_r7780rp_irq(i);
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
new file mode 100644
index 0000000..dd6ec4c
--- /dev/null
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
@@ -0,0 +1,29 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/r7780rp.h>
+
+void __init highlander_init_irq(void)
+{
+	ctrl_outw(0x0000, PA_IRLSSR1);	/* FPGA IRLSSR1(CF_CD clear) */
+
+	/* Setup the FPGA IRL */
+	ctrl_outw(0x0000, PA_IRLPRA);	/* FPGA IRLA */
+	ctrl_outw(0xe598, PA_IRLPRB);	/* FPGA IRLB */
+	ctrl_outw(0x7060, PA_IRLPRC);	/* FPGA IRLC */
+	ctrl_outw(0x0000, PA_IRLPRD);	/* FPGA IRLD */
+	ctrl_outw(0x4321, PA_IRLPRE);	/* FPGA IRLE */
+	ctrl_outw(0x0000, PA_IRLPRF);	/* FPGA IRLF */
+
+	make_r7780rp_irq(1);	/* CF card */
+	make_r7780rp_irq(10);	/* On-board ethernet */
+}
diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c
index cc381e1..e0b8eb5 100644
--- a/arch/sh/boards/renesas/r7780rp/irq.c
+++ b/arch/sh/boards/renesas/r7780rp/irq.c
@@ -14,10 +14,12 @@
 #include <linux/io.h>
 #include <asm/r7780rp.h>
 
-#ifdef CONFIG_SH_R7780MP
-static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
-#else
+#ifdef CONFIG_SH_R7780RP
 static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0};
+#elif defined(CONFIG_SH_R7780MP)
+static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};
+#elif defined(CONFIG_SH_R7785RP)
+static int mask_pos[] = {2, 11, 2, 2, 2, 2, 9, 8, 7, 5, 10, 2, 2, 2, 2, 2};
 #endif
 
 static void enable_r7780rp_irq(unsigned int irq)
@@ -40,17 +42,10 @@
 	.mask_ack	= disable_r7780rp_irq,
 };
 
-/*
- * Initialize IRQ setting
- */
-void __init init_r7780rp_IRQ(void)
+void make_r7780rp_irq(unsigned int irq)
 {
-	int i;
-
-	for (i = 0; i < 15; i++) {
-		disable_irq_nosync(i);
-		set_irq_chip_and_handler_name(i, &r7780rp_irq_chip,
-					      handle_level_irq, "level");
-		enable_r7780rp_irq(i);
-	}
+	disable_irq_nosync(irq);
+	set_irq_chip_and_handler_name(irq, &r7780rp_irq_chip,
+				      handle_level_irq, "level");
+	enable_r7780rp_irq(irq);
 }
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 2faba66..0727ef9 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -1,10 +1,13 @@
 /*
  * arch/sh/boards/renesas/r7780rp/setup.c
  *
+ * Renesas Solutions Highlander Support.
+ *
  * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
  * Copyright (C) 2005 - 2007 Paul Mundt
  *
- * Renesas Solutions Highlander R7780RP-1 Support.
+ * This contains support for the R7780RP-1, R7780MP, and R7785RP
+ * Highlander modules.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,32 +21,6 @@
 #include <asm/clock.h>
 #include <asm/io.h>
 
-extern void init_r7780rp_IRQ(void);
-
-static struct resource m66596_usb_host_resources[] = {
-	[0] = {
-		.start	= 0xa4800000,
-		.end	= 0xa4ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 6,		/* irq number */
-		.end	= 6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device m66596_usb_host_device = {
-	.name		= "m66596-hcd",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= NULL,		/* don't use dma */
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(m66596_usb_host_resources),
-	.resource	= m66596_usb_host_resources,
-};
-
 static struct resource cf_ide_resources[] = {
 	[0] = {
 		.start	= PA_AREA5_IO + 0x1000,
@@ -56,10 +33,10 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
-#ifdef CONFIG_SH_R7780MP
-		.start	= 1,
-#else
+#ifdef CONFIG_SH_R7780RP
 		.start	= 4,
+#else
+		.start	= 1,
 #endif
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -92,15 +69,18 @@
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
+
+	/* R7785RP has a slightly more sensible FPGA.. */
+#ifndef CONFIG_SH_R7785RP
 	.dev	= {
 		.platform_data	= heartbeat_bit_pos,
 	},
+#endif
 	.num_resources	= ARRAY_SIZE(heartbeat_resources),
 	.resource	= heartbeat_resources,
 };
 
 static struct platform_device *r7780rp_devices[] __initdata = {
-	&m66596_usb_host_device,
 	&cf_ide_device,
 	&heartbeat_device,
 };
@@ -110,18 +90,19 @@
 	return platform_add_devices(r7780rp_devices,
 				    ARRAY_SIZE(r7780rp_devices));
 }
+device_initcall(r7780rp_devices_setup);
 
 /*
  * Platform specific clocks
  */
 static void ivdr_clk_enable(struct clk *clk)
 {
-	ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << 8), PA_IVDRCTL);
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
 }
 
 static void ivdr_clk_disable(struct clk *clk)
 {
-	ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << 8), PA_IVDRCTL);
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
 }
 
 static struct clk_ops ivdr_clk_ops = {
@@ -140,22 +121,22 @@
 
 static void r7780rp_power_off(void)
 {
-#ifdef CONFIG_SH_R7780MP
-	ctrl_outw(0x0001, PA_POFF);
-#endif
+	if (mach_is_r7780mp() || mach_is_r7785rp())
+		ctrl_outw(0x0001, PA_POFF);
 }
 
 /*
  * Initialize the board
  */
-static void __init r7780rp_setup(char **cmdline_p)
+static void __init highlander_setup(char **cmdline_p)
 {
 	u16 ver = ctrl_inw(PA_VERREG);
 	int i;
 
-	device_initcall(r7780rp_devices_setup);
-
-	printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
+	printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
+			 mach_is_r7780rp() ? "R7780RP-1" :
+			 mach_is_r7780mp() ? "R7780MP"	 :
+					     "R7785RP");
 
 	printk(KERN_INFO "Board version: %d (revision %d), "
 			 "FPGA version: %d (revision %d)\n",
@@ -173,9 +154,10 @@
 	}
 
 	ctrl_outw(0x0000, PA_OBLED);	/* Clear LED. */
-#ifndef CONFIG_SH_R7780MP
-	ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
-#endif
+
+	if (mach_is_r7780rp())
+		ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
+
 	ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);	/* Si13112 */
 
 	pm_power_off = r7780rp_power_off;
@@ -184,10 +166,10 @@
 /*
  * The Machine Vector
  */
-struct sh_machine_vector mv_r7780rp __initmv = {
-	.mv_name		= "Highlander R7780RP-1",
-	.mv_setup		= r7780rp_setup,
+struct sh_machine_vector mv_highlander __initmv = {
+	.mv_name		= "Highlander",
 	.mv_nr_irqs		= 109,
-	.mv_init_irq		= init_r7780rp_IRQ,
+	.mv_setup		= highlander_setup,
+	.mv_init_irq		= highlander_init_irq,
 };
-ALIAS_MV(r7780rp)
+ALIAS_MV(highlander)
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
index 9941949..c455047 100644
--- a/arch/sh/boards/se/770x/io.c
+++ b/arch/sh/boards/se/770x/io.c
@@ -27,6 +27,8 @@
 static inline volatile __u16 *
 port2adr(unsigned int port)
 {
+	if (port & 0xff000000)
+		return ( volatile __u16 *) port;
 	if (port >= 0x2000)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
 	else if (port >= 0x1000)
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
index 307ca5d..c8eccff 100644
--- a/arch/sh/boards/se/770x/irq.c
+++ b/arch/sh/boards/se/770x/irq.c
@@ -55,23 +55,34 @@
 }
 
 static struct ipr_data se770x_ipr_map[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* This is default value */
-	{ 0xf-0x2, 0, 8,  0x2 , BCR_ILCRA},
-	{ 0xf-0xa, 0, 4,  0xa , BCR_ILCRA},
-	{ 0xf-0x5, 0, 0,  0x5 , BCR_ILCRB},
-	{ 0xf-0x8, 0, 4,  0x8 , BCR_ILCRC},
-	{ 0xf-0xc, 0, 0,  0xc , BCR_ILCRC},
-	{ 0xf-0xe, 0, 12, 0xe , BCR_ILCRD},
-	{ 0xf-0x3, 0, 4,  0x3 , BCR_ILCRD}, /* LAN */
-	{ 0xf-0xd, 0, 8,  0xd , BCR_ILCRE},
-	{ 0xf-0x9, 0, 4,  0x9 , BCR_ILCRE},
-	{ 0xf-0x1, 0, 0,  0x1 , BCR_ILCRE},
-	{ 0xf-0xf, 0, 12, 0xf , BCR_ILCRF},
-	{ 0xf-0xb, 0, 4,  0xb , BCR_ILCRF},
-	{ 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG},
-	{ 0xf-0x6, 0, 8,  0x6 , BCR_ILCRG},
-	{ 0xf-0x4, 0, 4,  0x4 , BCR_ILCRG},
+	{ 13, 0, 8,  0x0f-13 ,BCR_ILCRA},
+	{ 5 , 0, 4,  0x0f- 5 ,BCR_ILCRA},
+	{ 10, 0, 0,  0x0f-10, BCR_ILCRB},
+	{ 7 , 0, 4,  0x0f- 7, BCR_ILCRC},
+	{ 3 , 0, 0,  0x0f- 3, BCR_ILCRC},
+	{ 1 , 0, 12, 0x0f- 1, BCR_ILCRD},
+	{ 12, 0, 4,  0x0f-12, BCR_ILCRD}, /* LAN */
+	{ 2 , 0, 8,  0x0f- 2, BCR_ILCRE}, /* PCIRQ2 */
+	{ 6 , 0, 4,  0x0f- 6, BCR_ILCRE}, /* PCIRQ1 */
+	{ 14, 0, 0,  0x0f-14, BCR_ILCRE}, /* PCIRQ0 */
+	{ 0 , 0, 12, 0x0f   , BCR_ILCRF}, 
+	{ 4 , 0, 4,  0x0f- 4, BCR_ILCRF},
+	{ 8 , 0, 12, 0x0f- 8, BCR_ILCRG},
+	{ 9 , 0, 8,  0x0f- 9, BCR_ILCRG},
+	{ 11, 0, 4,  0x0f-11, BCR_ILCRG},
 #else
 	{ 14, 0,  8, 0x0f-14 ,BCR_ILCRA},
 	{ 12, 0,  4, 0x0f-12 ,BCR_ILCRA},
@@ -81,8 +92,10 @@
 	{  4, 0,  4, 0x0f- 4 ,BCR_ILCRC},
 	{  3, 0,  0, 0x0f- 3 ,BCR_ILCRC},
 	{  1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
+#if defined(CONFIG_STNIC)
 	/* ST NIC */
 	{ 10, 0,  4, 0x0f-10 ,BCR_ILCRD}, 	/* LAN */
+#endif
 	/* MRSHPC IRQs setting */
 	{  0, 0, 12, 0x0f- 0 ,BCR_ILCRE},	/* PCIRQ3 */
 	{ 11, 0,  8, 0x0f-11 ,BCR_ILCRE}, 	/* PCIRQ2 */
@@ -100,18 +113,6 @@
  */
 void __init init_se_IRQ(void)
 {
-        /*
-         * Super I/O (Just mimic PC):
-         *  1: keyboard
-         *  3: serial 0
-         *  4: serial 1
-         *  5: printer
-         *  6: floppy
-         *  8: rtc
-         * 12: mouse
-         * 14: ide0
-         */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* Disable all interrupts */
 	ctrl_outw(0, BCR_ILCRA);
 	ctrl_outw(0, BCR_ILCRB);
@@ -120,6 +121,6 @@
 	ctrl_outw(0, BCR_ILCRE);
 	ctrl_outw(0, BCR_ILCRF);
 	ctrl_outw(0, BCR_ILCRG);
-#endif
+
 	make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
 }
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
index 45cbc36..17a2631 100644
--- a/arch/sh/boards/se/770x/setup.c
+++ b/arch/sh/boards/se/770x/setup.c
@@ -63,6 +63,31 @@
 	outb_p(CONFIG_EXIT, CONFIG_PORT);
 }
 
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
 static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
 
 static struct resource heartbeat_resources[] = {
@@ -85,13 +110,14 @@
 
 static struct platform_device *se_devices[] __initdata = {
 	&heartbeat_device,
+	&cf_ide_device,
 };
 
 static int __init se_devices_setup(void)
 {
 	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
 }
-__initcall(se_devices_setup);
+device_initcall(se_devices_setup);
 
 /*
  * The Machine Vector
@@ -107,6 +133,8 @@
 	.mv_nr_irqs		= 61,
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 	.mv_nr_irqs		= 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+	.mv_nr_irqs             = 104,
 #endif
 
 	.mv_inb			= se_inb,
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/se/7722/Makefile
new file mode 100644
index 0000000..8694373
--- /dev/null
+++ b/arch/sh/boards/se/7722/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
new file mode 100644
index 0000000..099e5de
--- /dev/null
+++ b/arch/sh/boards/se/7722/irq.c
@@ -0,0 +1,101 @@
+/*
+ * linux/arch/sh/boards/se/7722/irq.c
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/se7722.h>
+
+#define INTC_INTMSK0             0xFFD00044
+#define INTC_INTMSKCLR0          0xFFD00064
+
+static void disable_se7722_irq(unsigned int irq)
+{
+	struct ipr_data *p = get_irq_chip_data(irq);
+	ctrl_outw( ctrl_inw( p->addr ) | p->priority , p->addr );
+}
+
+static void enable_se7722_irq(unsigned int irq)
+{
+	struct ipr_data *p = get_irq_chip_data(irq);
+	ctrl_outw( ctrl_inw( p->addr ) & ~p->priority , p->addr );
+}
+
+static struct irq_chip se7722_irq_chip __read_mostly = {
+	.name           = "SE7722",
+	.mask           = disable_se7722_irq,
+	.unmask         = enable_se7722_irq,
+	.mask_ack       = disable_se7722_irq,
+};
+
+static struct ipr_data ipr_irq_table[] = {
+	/* irq        ,idx,sft, priority     , addr   */
+	{ MRSHPC_IRQ0 , 0 , 0 , MRSHPC_BIT0 , IRQ01_MASK } ,
+	{ MRSHPC_IRQ1 , 0 , 0 , MRSHPC_BIT1 , IRQ01_MASK } ,
+	{ MRSHPC_IRQ2 , 0 , 0 , MRSHPC_BIT2 , IRQ01_MASK } ,
+	{ MRSHPC_IRQ3 , 0 , 0 , MRSHPC_BIT3 , IRQ01_MASK } ,
+	{ SMC_IRQ     , 0 , 0 , SMC_BIT     , IRQ01_MASK } ,
+	{ EXT_IRQ     , 0 , 0 , EXT_BIT     , IRQ01_MASK } ,
+};
+
+int se7722_irq_demux(int irq)
+{
+
+	if ((irq == IRQ0_IRQ)||(irq == IRQ1_IRQ)) {
+		volatile unsigned short intv =
+			*(volatile unsigned short *)IRQ01_STS;
+		if (irq == IRQ0_IRQ){
+			if(intv & SMC_BIT ) {
+				return SMC_IRQ;
+			} else if(intv & USB_BIT) {
+				return USB_IRQ;
+			} else {
+				printk("intv =%04x\n", intv);
+				return SMC_IRQ;
+			}
+		} else if(irq == IRQ1_IRQ){
+			if(intv & MRSHPC_BIT0) {
+				return MRSHPC_IRQ0;
+			} else if(intv & MRSHPC_BIT1) {
+				return MRSHPC_IRQ1;
+			} else if(intv & MRSHPC_BIT2) {
+				return MRSHPC_IRQ2;
+			} else if(intv & MRSHPC_BIT3) {
+				return MRSHPC_IRQ3;
+			} else {
+				printk("BIT_EXTENTION =%04x\n", intv);
+				return EXT_IRQ;
+			}
+		}
+	}
+	return irq;
+
+}
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7722_IRQ(void)
+{
+	int i = 0;
+	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+	ctrl_outl((3 << ((7 - 0) * 4))|(3 << ((7 - 1) * 4)), INTC_INTPRI0);     /* irq0 pri=3,irq1,pri=3 */
+	ctrl_outw((2 << ((7 - 0) * 2))|(2 << ((7 - 1) * 2)), INTC_ICR1);        /* irq0,1 low-level irq */
+
+	for (i = 0; i < ARRAY_SIZE(ipr_irq_table); i++) {
+		disable_irq_nosync(ipr_irq_table[i].irq);
+		set_irq_chip_and_handler_name( ipr_irq_table[i].irq, &se7722_irq_chip,
+			handle_level_irq, "level");
+		set_irq_chip_data( ipr_irq_table[i].irq, &ipr_irq_table[i] );
+		disable_se7722_irq(ipr_irq_table[i].irq);
+	}
+}
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
new file mode 100644
index 0000000..636ca6c
--- /dev/null
+++ b/arch/sh/boards/se/7722/setup.c
@@ -0,0 +1,148 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pata_platform.h>
+#include <asm/machvec.h>
+#include <asm/se7722.h>
+#include <asm/io.h>
+
+/* Heartbeat */
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev    = {
+		.platform_data  = heartbeat_bit_pos,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&cf_ide_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+	return platform_add_devices(se7722_devices,
+		ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
+
+	ctrl_outl(0x00051001, MSTPCR0);
+	ctrl_outl(0x00000000, MSTPCR1);
+	/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */
+	ctrl_outl(0xffffbfC0, MSTPCR2); 
+
+	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+	/* LCDC I/O */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	/* SIOF1*/
+	ctrl_outw(0x0003, PORT_PSELB);
+	ctrl_outw(0xe000, PORT_PSELC);
+	ctrl_outw(0x0000, PORT_PKCR);
+
+	/* LCDC */
+	ctrl_outw(0x4020, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(0x0002, PORT_PRCR);
+	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+	/* KEYSC */
+	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	ctrl_outw(0x0000, PORT_PYCR);
+	ctrl_outw(0x0000, PORT_PZCR);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7722 __initmv = {
+	.mv_name                = "Solution Engine 7722" ,
+	.mv_setup               = se7722_setup ,
+	.mv_nr_irqs		= 109 ,
+	.mv_init_irq		= init_se7722_IRQ,
+	.mv_irq_demux           = se7722_irq_demux,
+
+};
+ALIAS_MV(se7722)
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index e3feae6..770defe 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -14,153 +14,6 @@
 #include <asm/se7751.h>
 #include <asm/io.h>
 
-void init_7751se_IRQ(void);
-
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_uart_setup(void);
-static struct kgdb_sermap kgdb_uart_sermap = 
-{ "ttyS", 0, kgdb_uart_setup, NULL };
-#endif
- 
-/*
- * Initialize the board
- */
-static void __init sh7751se_setup(char **cmdline_p)
-{
-	/* Call init_smsc() replacement to set up SuperIO. */
-	/* XXX: RTC setting comes here */
-#ifdef CONFIG_SH_KGDB
-	kgdb_register_sermap(&kgdb_uart_sermap);
-#endif
-}
-
-/*********************************************************************
- * Currently a hack (e.g. does not interact well w/serial.c, lots of *
- * hardcoded stuff) but may be useful if SCI/F needs debugging.      *
- * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and  *
- * arch/i386/lib/kgdb_serial.c).                                     *
- *********************************************************************/
-
-#ifdef CONFIG_SH_KGDB
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#define COM1_PORT 0x3f8  /* Base I/O address */
-#define COM1_IRQ  4      /* IRQ not used yet */
-#define COM2_PORT 0x2f8  /* Base I/O address */
-#define COM2_IRQ  3      /* IRQ not used yet */
-
-#define SB_CLOCK 1843200 /* Serial baud clock */
-#define SB_BASE (SB_CLOCK/16)
-#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
-
-struct uart_port {
-	int base;
-};
-#define UART_NPORTS 2
-struct uart_port uart_ports[] = {
-	{ COM1_PORT },
-	{ COM2_PORT },
-};
-struct uart_port *kgdb_uart_port;
-
-#define UART_IN(reg)	inb_p(kgdb_uart_port->base + reg)
-#define UART_OUT(reg,v)	outb_p((v), kgdb_uart_port->base + reg)
-
-/* Basic read/write functions for the UART */
-#define UART_LSR_RXCERR    (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE)
-static int kgdb_uart_getchar(void)
-{
-	int lsr;
-	int c = -1;
-
-	while (c == -1) {
-		lsr = UART_IN(UART_LSR);
-		if (lsr & UART_LSR_DR) 
-			c = UART_IN(UART_RX);
-		if ((lsr & UART_LSR_RXCERR))
-			c = -1;
-	}
-	return c;
-}
-
-static void kgdb_uart_putchar(int c)
-{
-	while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0)
-		;
-	UART_OUT(UART_TX, c);
-}
-
-/*
- * Initialize UART to configured/requested values.
- * (But we don't interrupts yet, or interact w/serial.c)
- */
-static int kgdb_uart_setup(void)
-{
-	int port;
-	int lcr = 0;
-	int bdiv = 0;
-
-	if (kgdb_portnum >= UART_NPORTS) {
-		KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum);
-		return -1;
-	}
-
-	kgdb_uart_port = &uart_ports[kgdb_portnum];
-
-	/* Init sequence from gdb_hook_interrupt */
-	UART_IN(UART_RX);
-	UART_OUT(UART_IER, 0);
-
-	UART_IN(UART_RX);	/* Serial driver comments say */
-	UART_IN(UART_IIR);	/* this clears interrupt regs */
-	UART_IN(UART_MSR);
-
-	/* Figure basic LCR values */
-	switch (kgdb_bits) {
-	case '7':
-		lcr |= UART_LCR_WLEN7;
-		break;
-	default: case '8': 
-		lcr |= UART_LCR_WLEN8;
-		break;
-	}
-	switch (kgdb_parity) {
-	case 'O':
-		lcr |= UART_LCR_PARITY;
-		break;
-	case 'E':
-		lcr |= (UART_LCR_PARITY | UART_LCR_EPAR);
-		break;
-	default: break;
-	}
-
-	/* Figure the baud rate divisor */
-	bdiv = (SB_BASE/kgdb_baud);
-	
-	/* Set the baud rate and LCR values */
-	UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB));
-	UART_OUT(UART_DLL, (bdiv & 0xff));
-	UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff));
-	UART_OUT(UART_LCR, lcr);
-
-	/* Set the MCR */
-	UART_OUT(UART_MCR, SB_MCR);
-
-	/* Turn off FIFOs for now */
-	UART_OUT(UART_FCR, 0);
-
-	/* Setup complete: initialize function pointers */
-	kgdb_getchar = kgdb_uart_getchar;
-	kgdb_putchar = kgdb_uart_putchar;
-
-	return 0;
-}
-#endif /* CONFIG_SH_KGDB */
-
 static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
 
 static struct resource heartbeat_resources[] = {
@@ -197,7 +50,6 @@
  */
 struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
-	.mv_setup		= sh7751se_setup,
 	.mv_nr_irqs		= 72,
 
 	.mv_inb			= sh7751se_inb,
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/se/7780/Makefile
new file mode 100644
index 0000000..6b88ada
--- /dev/null
+++ b/arch/sh/boards/se/7780/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
new file mode 100644
index 0000000..3d0625c
--- /dev/null
+++ b/arch/sh/boards/se/7780/irq.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/se7780.h>
+
+#define INTC_INTMSK0             0xFFD00044
+#define INTC_INTMSKCLR0          0xFFD00064
+
+static void disable_se7780_irq(unsigned int irq)
+{
+	struct intc2_data *p = get_irq_chip_data(irq);
+	ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
+}
+
+static void enable_se7780_irq(unsigned int irq)
+{
+	struct intc2_data *p = get_irq_chip_data(irq);
+	ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
+}
+
+static struct irq_chip se7780_irq_chip __read_mostly = {
+	.name           = "SE7780",
+	.mask           = disable_se7780_irq,
+	.unmask         = enable_se7780_irq,
+	.mask_ack       = disable_se7780_irq,
+};
+
+static struct intc2_data intc2_irq_table[] = {
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
+	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
+	{ 6,  0, 29, 0, 29, 3 }, /* daughter board EXTINT3 */
+	{ 8,  0, 28, 0, 28, 3 }, /* SMC 91C111 (LAN) */
+	{ 10, 0, 27, 0, 27, 3 }, /* daughter board EXTINT4 */
+	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT5 */
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT6 */
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT7 */
+	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT8 */
+	{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	int i ;
+
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
+		disable_irq_nosync(intc2_irq_table[i].irq);
+		set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
+			handle_level_irq, "level");
+		set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
+		disable_se7780_irq(intc2_irq_table[i].irq);
+	}
+}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
new file mode 100644
index 0000000..df7d08a
--- /dev/null
+++ b/arch/sh/boards/se/7780/setup.c
@@ -0,0 +1,122 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/se7780.h>
+#include <asm/io.h>
+
+/* Heartbeat */
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev    = {
+		.platform_data  = heartbeat_bit_pos,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	ctrl_outw(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	ctrl_outw(0x0000, GPIO_PECR);
+	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	ctrl_outw(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	ctrl_outw(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_nr_irqs		= 111 ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
+ALIAS_MV(se7780)
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
new file mode 100644
index 0000000..be86414
--- /dev/null
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -0,0 +1,1271 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc4
+# Sat Mar 24 22:04:27 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+CONFIG_SH_LBOX_RE2=y
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+CONFIG_CPU_SUBTYPE_SH7751=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=40000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_DEBUG=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=y
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig
index 2b75b48..48c6a21 100644
--- a/arch/sh/configs/r7780rp_defconfig
+++ b/arch/sh/configs/r7780rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Wed Dec  6 11:59:38 2006
+# Linux kernel version: 2.6.21-rc7
+# Tue May  1 12:28:39 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -13,6 +14,8 @@
 # CONFIG_GENERIC_TIME is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -31,6 +34,7 @@
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -41,7 +45,7 @@
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -99,23 +103,23 @@
 # System type
 #
 # CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7722_SOLUTION_ENGINE is not set
 # CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
 # CONFIG_SH_7300_SOLUTION_ENGINE is not set
 # CONFIG_SH_7343_SOLUTION_ENGINE is not set
 # CONFIG_SH_73180_SOLUTION_ENGINE is not set
 # CONFIG_SH_7751_SYSTEMH is not set
 # CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
 # CONFIG_SH_SATURN is not set
 # CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
 # CONFIG_SH_MPC1211 is not set
 # CONFIG_SH_SH03 is not set
 # CONFIG_SH_SECUREEDGE5410 is not set
 # CONFIG_SH_HS7751RVOIP is not set
 # CONFIG_SH_7710VOIPGW is not set
 # CONFIG_SH_RTS7751R2D is not set
-CONFIG_SH_R7780RP=y
+CONFIG_SH_HIGHLANDER=y
 # CONFIG_SH_EDOSK7705 is not set
 # CONFIG_SH_SH4202_MICRODEV is not set
 # CONFIG_SH_LANDISK is not set
@@ -123,7 +127,11 @@
 # CONFIG_SH_SHMIN is not set
 # CONFIG_SH_7206_SOLUTION_ENGINE is not set
 # CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
 # CONFIG_SH_UNKNOWN is not set
+CONFIG_SH_R7780RP=y
+# CONFIG_SH_R7780MP is not set
+# CONFIG_SH_R7785RP is not set
 
 #
 # Processor selection
@@ -152,6 +160,7 @@
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
 
 #
 # SH-4 Processor Support
@@ -183,6 +192,7 @@
 #
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
 
 #
 # Memory management options
@@ -193,6 +203,8 @@
 CONFIG_MEMORY_SIZE=0x08000000
 # CONFIG_32BIT is not set
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
@@ -210,6 +222,7 @@
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 
 #
 # Cache configuration
@@ -226,20 +239,15 @@
 CONFIG_SH_FPU=y
 # CONFIG_SH_DSP is not set
 CONFIG_SH_STORE_QUEUES=y
+CONFIG_SPECULATIVE_EXECUTION=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_INTC2_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
-CONFIG_CPU_HAS_PTEA=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
-
-#
-# R7780RP options
-#
-CONFIG_SH_R7780MP=y
 CONFIG_SH_TIMER_IRQ=28
 CONFIG_NO_IDLE_HZ=y
 CONFIG_SH_PCLK_FREQ=32000000
@@ -262,6 +270,7 @@
 #
 # Additional SuperH Device Drivers
 #
+# CONFIG_HEARTBEAT is not set
 CONFIG_PUSH_SWITCH=y
 
 #
@@ -269,9 +278,11 @@
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_SMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
@@ -294,7 +305,6 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -334,6 +344,7 @@
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -425,6 +436,7 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -445,6 +457,7 @@
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -461,7 +474,6 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -481,6 +493,7 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -500,6 +513,7 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
 # SCSI Transports
@@ -544,11 +558,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
 #
 CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
@@ -564,6 +580,7 @@
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -579,6 +596,7 @@
 # CONFIG_PATA_HPT3X2N is not set
 # CONFIG_PATA_HPT3X3 is not set
 # CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
@@ -685,6 +703,7 @@
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
 # CONFIG_VIA_RHINE_NAPI is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -707,11 +726,13 @@
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
@@ -889,10 +910,16 @@
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -905,9 +932,8 @@
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
 
 #
 # Sound
@@ -923,9 +949,8 @@
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
+# CONFIG_OBSOLETE_OSS is not set
 # CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
 # CONFIG_SOUND_ICH is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
@@ -933,6 +958,12 @@
 # CONFIG_SOUND_VIA82CXXX is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1017,6 +1048,14 @@
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1175,6 +1214,11 @@
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 CONFIG_PROFILING=y
@@ -1184,19 +1228,22 @@
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
+# CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1204,19 +1251,19 @@
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_FRAME_POINTER is not set
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
@@ -1233,6 +1280,7 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1241,9 +1289,13 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1257,6 +1309,7 @@
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1266,7 +1319,10 @@
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
new file mode 100644
index 0000000..0f5ec64
--- /dev/null
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -0,0 +1,1334 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc3
+# Mon Mar 12 14:26:33 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_UNKNOWN is not set
+# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_R7780MP is not set
+CONFIG_SH_R7785RP=y
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_32BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+CONFIG_HUGETLB_PAGE_SIZE_1MB=y
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_NO_IDLE_HZ=y
+CONFIG_SH_PCLK_FREQ=50000000
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+CONFIG_PUSH_SWITCH=y
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_OBSOLETE_OSS is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 06ebd6e..87ae5c1 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,15 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:03:04 2006
+# Linux kernel version: 2.6.21-rc5
+# Thu Apr 26 09:16:31 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,7 +39,9 @@
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -91,27 +99,30 @@
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_SOLUTION_ENGINE=y
 # CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
 # CONFIG_SH_7300_SOLUTION_ENGINE is not set
 # CONFIG_SH_7343_SOLUTION_ENGINE is not set
 # CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7722_SOLUTION_ENGINE is not set
 # CONFIG_SH_7751_SYSTEMH is not set
 # CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
 # CONFIG_SH_SATURN is not set
 # CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
 # CONFIG_SH_MPC1211 is not set
 # CONFIG_SH_SH03 is not set
 # CONFIG_SH_SECUREEDGE5410 is not set
 # CONFIG_SH_HS7751RVOIP is not set
 # CONFIG_SH_7710VOIPGW is not set
 # CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
+# CONFIG_SH_HIGHLANDER is not set
 # CONFIG_SH_EDOSK7705 is not set
 # CONFIG_SH_SH4202_MICRODEV is not set
 # CONFIG_SH_LANDISK is not set
 # CONFIG_SH_TITAN is not set
 # CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
 # CONFIG_SH_UNKNOWN is not set
 
 #
@@ -123,6 +134,12 @@
 # SH-2 Processor Support
 #
 # CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
 
 #
 # SH-3 Processor Support
@@ -134,6 +151,7 @@
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
 
 #
 # SH-4 Processor Support
@@ -158,12 +176,14 @@
 #
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
 
 #
 # SH4AL-DSP Processor Support
 #
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
 
 #
 # Memory management options
@@ -173,6 +193,11 @@
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -182,6 +207,7 @@
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 
 #
 # Cache configuration
@@ -190,23 +216,31 @@
 # CONFIG_SH_DIRECT_MAPPED is not set
 # CONFIG_SH_WRITETHROUGH is not set
 # CONFIG_SH_OCRAM is not set
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+# CONFIG_CF_AREA4 is not set
+CONFIG_CF_BASE_ADDR=0xb8000000
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 # CONFIG_SH_DSP is not set
 # CONFIG_SH_ADC is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_PINT_IRQ=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=33333333
 
 #
@@ -223,13 +257,19 @@
 # Companion Chips
 #
 # CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 # CONFIG_KEXEC is not set
@@ -287,6 +327,7 @@
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -307,11 +348,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -388,6 +431,7 @@
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -461,6 +505,7 @@
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -472,11 +517,14 @@
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -649,17 +697,12 @@
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -675,6 +718,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -683,18 +727,19 @@
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -704,7 +749,7 @@
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_FB is not set
 
 #
@@ -713,6 +758,12 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -773,16 +824,26 @@
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -828,7 +889,6 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -878,6 +938,10 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -885,15 +949,18 @@
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_KGDB is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
@@ -908,6 +975,7 @@
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -915,3 +983,5 @@
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
new file mode 100644
index 0000000..a5e37db
--- /dev/null
+++ b/arch/sh/configs/se7712_defconfig
@@ -0,0 +1,1088 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc4
+# Wed Mar 28 10:19:02 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH3=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+CONFIG_CPU_SUBTYPE_SH7712=y
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_SCH_DSMARK=y
+CONFIG_NET_SCH_NETEM=y
+CONFIG_NET_SCH_INGRESS=y
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=y
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_POLICE is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
new file mode 100644
index 0000000..ca4c663
--- /dev/null
+++ b/arch/sh/configs/se7722_defconfig
@@ -0,0 +1,980 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc7
+# Fri Apr 27 16:30:30 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+# CONFIG_SH_SOLUTION_ENGINE is not set
+CONFIG_SH_7722_SOLUTION_ENGINE=y
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SH4AL_DSP=y
+CONFIG_CPU_SHX2=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+CONFIG_CPU_SUBTYPE_SH7722=y
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+# CONFIG_32BIT is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_NO_IDLE_HZ=y
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_PLATFORM=y
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
new file mode 100644
index 0000000..538661e
--- /dev/null
+++ b/arch/sh/configs/se7780_defconfig
@@ -0,0 +1,1309 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar 15 14:06:20 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System type
+#
+CONFIG_SOLUTION_ENGINE=y
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+CONFIG_SH_7780_SOLUTION_ENGINE=y
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_UNKNOWN is not set
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_32BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC2_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=33333333
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00810000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig
index c54c758..420c6b2 100644
--- a/arch/sh/drivers/Kconfig
+++ b/arch/sh/drivers/Kconfig
@@ -1,5 +1,15 @@
+source "arch/sh/drivers/dma/Kconfig"
+source "arch/sh/cchips/Kconfig"
+
 menu "Additional SuperH Device Drivers"
 
+config HEARTBEAT
+	bool "Heartbeat LED"
+	help
+	  Use the power-on LED on your machine as a load meter.  The exact
+	  behavior is platform-dependent, but normally the flash frequency is
+	  a hyperbolic function of the 5-minute load average.
+
 config PUSH_SWITCH
 	tristate "Push switch support"
 	help
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index bc59cb6..23dd608 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -40,16 +40,9 @@
 	static unsigned bit = 0, up = 1;
 
 	ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base);
-	if (up)
-		if (bit == (ARRAY_SIZE(hd->bit_pos) - 1)) {
-			bit--;
-			up = 0;
-		} else
-			bit++;
-	else if (bit == 0)
-		up = 1;
-	else
-		bit--;
+	bit += up;
+	if ((bit == 0) || (bit == ARRAY_SIZE(hd->bit_pos)-1))
+		up = -up;
 
 	mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
 			((avenrun[0] / 5) + (3 << FSHIFT)))));
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index cc8d0d0..0e9b532 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -8,12 +8,15 @@
 obj-$(CONFIG_CPU_SUBTYPE_ST40STB1)	+= pci-st40.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
 
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
 					   dma-dreamcast.o
 obj-$(CONFIG_SH_SECUREEDGE5410)		+= ops-snapgear.o
 obj-$(CONFIG_SH_RTS7751R2D)		+= ops-rts7751r2d.o fixups-rts7751r2d.o
 obj-$(CONFIG_SH_SH03)			+= ops-sh03.o fixups-sh03.o
-obj-$(CONFIG_SH_R7780RP)		+= ops-r7780rp.o fixups-r7780rp.o
+obj-$(CONFIG_SH_HIGHLANDER)		+= ops-r7780rp.o fixups-r7780rp.o
 obj-$(CONFIG_SH_TITAN)			+= ops-titan.o
 obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
+obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c
new file mode 100644
index 0000000..40b19bd
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-lboxre2.c
@@ -0,0 +1,41 @@
+/*
+ * arch/sh/drivers/pci/fixups-lboxre2.c
+ *
+ * L-BOX RE2 PCI fixups
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include "pci-sh4.h"
+
+#define PCIMCR_MRSET_OFF	0xBFFFFFFF
+#define PCIMCR_RFSH_OFF		0xFFFFFFFB
+
+int pci_fixup_pcic(void)
+{
+	unsigned long bcr1, mcr;
+
+	bcr1 = inl(SH7751_BCR1);
+	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
+	pci_write_reg(bcr1, SH4_PCIBCR1);
+
+	/* Enable all interrupts, so we known what to fix */
+	pci_write_reg(0x0000c3ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+	pci_write_reg(0xfb900047, SH7751_PCICONF1);
+	pci_write_reg(0xab000001, SH7751_PCICONF4);
+
+	mcr = inl(SH7751_MCR);
+	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+	pci_write_reg(mcr, SH4_PCIMCR);
+
+	pci_write_reg(0x0c000000, SH7751_PCICONF5);
+	pci_write_reg(0xd0000000, SH7751_PCICONF6);
+	pci_write_reg(0x0c000000, SH4_PCILAR0);
+	pci_write_reg(0x00000000, SH4_PCILAR1);
+
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c
new file mode 100644
index 0000000..880cea1
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-se7780.c
@@ -0,0 +1,60 @@
+/*
+ * arch/sh/drivers/pci/fixups-se7780.c
+ *
+ * HITACHI UL Solution Engine 7780  PCI fixups
+ *
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+#include <asm/io.h>
+
+int pci_fixup_pcic(void)
+{
+	ctrl_outl(0x00000001, SH7780_PCI_VCR2);
+
+	/* Enable all interrupts, so we know what to fix */
+	pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
+	pci_write_reg(0x0000380F, SH7780_PCIAINTM);
+
+	/* Set up standard PCI config registers */
+	ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS));
+	ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD));
+	ctrl_outb(  0x00, PCI_REG(SH7780_PCIPIF));
+	ctrl_outb(  0x00, PCI_REG(SH7780_PCISUB));
+	ctrl_outb(  0x06, PCI_REG(SH7780_PCIBCC));
+	ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID));
+	ctrl_outw(0x0001, PCI_REG(SH7780_PCISID));
+
+	pci_write_reg(0x08000000, SH7780_PCIMBAR0);     /* PCI */
+	pci_write_reg(0x08000000, SH7780_PCILAR0);     /* SHwy */
+	pci_write_reg(0x07F00001, SH7780_PCILSR);      /* size 128M w/ MBAR */
+
+	pci_write_reg(0x00000000, SH7780_PCIMBAR1);
+	pci_write_reg(0x00000000, SH7780_PCILAR1);
+	pci_write_reg(0x00000000, SH7780_PCILSR1);
+
+	pci_write_reg(0xAB000801, SH7780_PCIIBAR);
+
+	/*
+	 * Set the MBR so PCI address is one-to-one with window,
+	 * meaning all calls go straight through... use ifdef to
+	 * catch erroneous assumption.
+	 */
+	pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
+	pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0);    /* 16M */
+
+	/* Set IOBR for window containing area specified in pci.h */
+	pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
+	pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
+
+	pci_write_reg(0xA5000C01, SH7780_PCICR);
+
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c
index d060308..bff09ec 100644
--- a/arch/sh/drivers/pci/ops-landisk.c
+++ b/arch/sh/drivers/pci/ops-landisk.c
@@ -17,8 +17,8 @@
 
 static struct resource sh7751_io_resource = {
 	.name = "SH7751 IO",
-	.start = 0x4000,
-	.end = 0x4000 + SH7751_PCI_IO_SIZE - 1,
+	.start = SH7751_PCI_IO_BASE,
+	.end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
 	.flags = IORESOURCE_IO
 };
 
diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c
new file mode 100644
index 0000000..a13cb76
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-lboxre2.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/sh/drivers/pci/ops-lboxre2.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * PCI initialization for the NTT COMWARE L-BOX RE2
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <asm/lboxre2.h>
+#include "pci-sh4.h"
+
+static char lboxre2_irq_tab[] __initdata = {
+	IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return lboxre2_irq_tab[slot];
+}
+
+static struct resource sh7751_io_resource = {
+	.name	= "SH7751_IO",
+	.start	= SH7751_PCI_IO_BASE ,
+	.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+	.name	= "SH7751_mem",
+	.start	= SH7751_PCI_MEMORY_BASE,
+	.end	= SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+extern struct pci_ops sh7751_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+	.window0	= {
+		.base	= SH7751_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+	.window1	= {
+		.base	= 0x00000000,	/* Unused */
+		.size	= 0x00000000,	/* Unused */
+	},
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7751_pcic_init(&sh7751_pci_map);
+}
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
index eeea157..f221608 100644
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -17,18 +17,25 @@
 #include <asm/io.h>
 #include "pci-sh4.h"
 
+static char r7780rp_irq_tab[] __initdata = {
+	0, 1, 2, 3,
+};
+
+static char r7780mp_irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
 int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
-        switch (slot) {
-	case 0: return IRQ_PCISLOT1;		/* PCI Interrupt #1 */
-	case 1: return IRQ_PCISLOT2;		/* PCI Interrupt #2 */
-	case 2: return IRQ_PCISLOT3;		/* PCI Interrupt #3 */
-	case 3: return IRQ_PCISLOT4;		/* PCI Interrupt E4 */
-	default:
-		printk(KERN_ERR "PCI: Bad IRQ mapping "
-		       "request for slot %d, func %d\n", slot, pin-1);
-		return -1;
-	}
+	if (mach_is_r7780rp())
+		return r7780rp_irq_tab[slot];
+	if (mach_is_r7780mp() || mach_is_r7785rp())
+		return r7780mp_irq_tab[slot];
+
+	printk(KERN_ERR "PCI: Bad IRQ mapping "
+	       "request for slot %d, func %d\n", slot, pin-1);
+
+	return -1;
 }
 
 static struct resource sh7780_io_resource = {
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
new file mode 100644
index 0000000..212674df
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/sh/drivers/pci/ops-se7780.c
+ *
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * PCI initialization for the Hitachi UL Solution Engine 7780SE03
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/se7780.h>
+#include <asm/io.h>
+#include "pci-sh4.h"
+
+/*
+ * IDSEL = AD16  PCI slot
+ * IDSEL = AD17  PCI slot
+ * IDSEL = AD18  Serial ATA Controller (Silicon Image SiL3512A)
+ * IDSEL = AD19  USB Host Controller (NEC uPD7210100A)
+ */
+
+/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
+static char se7780_irq_tab[4][16] __initdata = {
+	/* INTA */
+	{ 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+	/* INTB */
+	{ 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+	/* INTC */
+	{ 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+	/* INTD */
+	{ 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+       return se7780_irq_tab[pin-1][slot];
+}
+
+static struct resource se7780_io_resource = {
+	.name	= "SH7780_IO",
+	.start	= 0x2000,
+	.end	= 0x2000 + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource se7780_mem_resource = {
+	.name	= "SH7780_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+extern struct pci_ops se7780_pci_ops;
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map se7780_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+	.flags  = SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	printk("SH7780 PCI: Finished initialization of the PCI controller\n");
+
+	/*
+	 * FPGA PCISEL register initialize
+	 *
+	 *  CPU  || SLOT1 | SLOT2 | S-ATA | USB
+	 *  -------------------------------------
+	 *  INTA || INTA  | INTD  |  --   | INTB
+	 *  -------------------------------------
+	 *  INTB || INTB  | INTA  |  --   | INTC
+	 *  -------------------------------------
+	 *  INTC || INTC  | INTB  | INTA  |  --
+	 *  -------------------------------------
+	 *  INTD || INTD  | INTC  |  --   | INTA
+	 *  -------------------------------------
+	 */
+	ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
+	ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
+
+	return sh7780_pcic_init(&se7780_pci_map);
+}
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 2d437100..54232f1 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -162,3 +162,9 @@
 
 	return str;
 }
+
+int __attribute__((weak)) pci_fixup_pcic(void)
+{
+	/* Nothing to do. */
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 5a61d60..1901c33 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -1,7 +1,7 @@
 #ifndef __PCI_SH4_H
 #define __PCI_SH4_H
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
 #include "pci-sh7780.h"
 #else
 #include "pci-sh7751.h"
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 9ddff76..1aca7fe 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -12,7 +12,6 @@
  *  License.  See linux/COPYING for more information.
  *
  */
-
 #undef DEBUG
 
 #include <linux/init.h>
@@ -28,7 +27,7 @@
  * Initialization. Try all known PCI access methods. Note that we support
  * using both PCI BIOS and direct access: in such cases, we use I/O ports
  * to access config space.
- * 
+ *
  * Note that the platform specific initialization (BSC registers, and memory
  * space mapping) will be called via the platform defined function
  * pcibios_init_platform().
@@ -115,7 +114,7 @@
 	 * Wait Cycle Control + Parity Enable + Bus Master +
 	 * Mem space enable
 	 */
-	word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | 
+	word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
 	       SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
 	pci_write_reg(word, SH7751_PCICONF1);
 
@@ -123,10 +122,10 @@
 	word = PCI_BASE_CLASS_BRIDGE << 24;
 	pci_write_reg(word, SH7751_PCICONF2);
 
-	/* Set IO and Mem windows to local address 
-	 * Make PCI and local address the same for easy 1 to 1 mapping 
+	/* Set IO and Mem windows to local address
+	 * Make PCI and local address the same for easy 1 to 1 mapping
 	 * Window0 = map->window0.size @ non-cached area base = SDRAM
-	 * Window1 = map->window1.size @ cached area base = SDRAM 
+	 * Window1 = map->window1.size @ cached area base = SDRAM
 	 */
 	word = map->window0.size - 1;
 	pci_write_reg(word, SH4_PCILSR0);
@@ -175,7 +174,7 @@
 	case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break;
 	case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break;
 	}
-	
+
 	if (!word)
 		return 0;
 
@@ -194,9 +193,7 @@
 	 * DMA interrupts...
 	 */
 
-#ifdef CONFIG_SH_RTS7751R2D
 	pci_fixup_pcic();
-#endif
 
 	/* SH7751 init done, set central function init complete */
 	/* use round robin mode to stop a device starving/overruning */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 602b644..5508e45 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -48,7 +48,7 @@
 static int __init sh7780_pci_init(void)
 {
 	unsigned int id;
-	int ret;
+	int ret, match = 0;
 
 	pr_debug("PCI: Starting intialization.\n");
 
@@ -56,19 +56,43 @@
 
 	/* check for SH7780/SH7780R hardware */
 	id = pci_read_reg(SH7780_PCIVID);
-	if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
-	    (id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
+	if ((id & 0xffff) == SH7780_VENDOR_ID) {
+		switch ((id >> 16) & 0xffff) {
+		case SH7780_DEVICE_ID:
+		case SH7781_DEVICE_ID:
+		case SH7785_DEVICE_ID:
+			match = 1;
+			break;
+		}
+	}
+
+	if (unlikely(!match)) {
 		printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
 		return -ENODEV;
 	}
 
 	/* Setup the INTC */
-	ctrl_outl(0x00200000, INTC_ICR0);	/* INTC SH-4 Mode */
-	ctrl_outl(0x00078000, INTC_INT2MSKCR);	/* enable PCIINTA - PCIINTD */
-	ctrl_outl(0x40000000, INTC_INTMSK1);	/* disable IRL4-7 Interrupt */
-	ctrl_outl(0x0000fffe, INTC_INTMSK2);	/* disable IRL4-7 Interrupt */
-	ctrl_outl(0x80000000, INTC_INTMSKCLR1);	/* enable IRL0-3 Interrupt */
-	ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);	/* enable IRL0-3 Interrupt */
+	if (mach_is_7780se()) {
+		/* ICR0: IRL=use separately */
+		ctrl_outl(0x00C00020, INTC_ICR0);
+		/* ICR1: detect low level(for 2ndcut) */
+		ctrl_outl(0xAAAA0000, INTC_ICR1);
+		/* INTPRI: priority=3(all) */
+		ctrl_outl(0x33333333, INTC_INTPRI);
+	} else {
+		/* INTC SH-4 Mode */
+		ctrl_outl(0x00200000, INTC_ICR0);
+		/* enable PCIINTA - PCIINTD */
+		ctrl_outl(0x00078000, INTC_INT2MSKCR);
+		/* disable IRL4-7 Interrupt */
+		ctrl_outl(0x40000000, INTC_INTMSK1);
+		/* disable IRL4-7 Interrupt */
+		ctrl_outl(0x0000fffe, INTC_INTMSK2);
+		/* enable IRL0-3 Interrupt */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		/* enable IRL0-3 Interrupt */
+		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+	}
 
 	if ((ret = sh4_pci_check_direct()) != 0)
 		return ret;
@@ -138,9 +162,8 @@
 	 * DMA interrupts...
 	 */
 
-#ifdef CONFIG_SH_R7780RP
+	/* Apply any last-minute PCIC fixups */
 	pci_fixup_pcic();
-#endif
 
 	/* SH7780 init done, set central function init complete */
 	/* use round robin mode to stop a device starving/overruning */
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index f02d218..00d12d0 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -14,8 +14,9 @@
 
 /* Platform Specific Values */
 #define SH7780_VENDOR_ID	0x1912
-#define SH7780_DEVICE_ID	0x0002
 #define SH7781_DEVICE_ID	0x0001
+#define SH7780_DEVICE_ID	0x0002
+#define SH7785_DEVICE_ID	0x0007
 
 /* SH7780 Control Registers */
 #define	SH7780_PCI_VCR0		0xFE000000
@@ -65,6 +66,22 @@
 #define SH7780_PCIPMCSR_BSE	0x046
 #define SH7780_PCICDD		0x047
 
+#define SH7780_PCICR		0x100		/* PCI Control Register */
+#define SH7780_PCILSR		0x104		/* PCI Local Space Register0 */
+#define SH7780_PCILSR1		0x108		/* PCI Local Space Register1 */
+#define SH7780_PCILAR0		0x10C		/* PCI Local Address Register1 */
+#define SH7780_PCILAR1		0x110		/* PCI Local Address Register1 */
+#define SH7780_PCIIR		0x114		/* PCI Interrupt Register */
+#define SH7780_PCIIMR		0x118		/* PCI Interrupt Mask Register */
+#define SH7780_PCIAIR		0x11C		/* Error Address Register */
+#define SH7780_PCICIR		0x120		/* Error Command/Data Register */
+#define SH7780_PCIAINT		0x130		/* Arbiter Interrupt Register */
+#define SH7780_PCIAINTM		0x134		/* Arbiter Int. Mask Register */
+#define SH7780_PCIBMIR		0x138		/* Error Bus Master Register */
+#define SH7780_PCIPAR		0x1C0		/* PIO Address Register */
+#define SH7780_PCIPINT		0x1CC		/* Power Mgmnt Int. Register */
+#define SH7780_PCIPINTM		0x1D0		/* Power Mgmnt Mask Register */
+
 #define SH7780_PCIMBR0		0x1E0
 #define SH7780_PCIMBMR0		0x1E4
 #define SH7780_PCIMBR2		0x1F0
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index ff30d7f..9104b62 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -20,5 +20,6 @@
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 3e5fa1e..0758d48 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -29,7 +29,7 @@
  * 0xB8001000 : Common Memory
  * 0xBA000000 : I/O
  */
-#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
 /* SH4 can't access PCMCIA interface through P2 area.
  * we must remap it with appropreate attribute bit of the page set.
  * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */
@@ -71,7 +71,7 @@
 /* You must have enabled the card, and set the level interrupt
  * before reaching this point. Possibly in boot ROM or boot loader.
  */
-#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
 	allocate_cf_area();
 #endif
 #if defined(CONFIG_SH_UNKNOWN)
@@ -84,15 +84,25 @@
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
 #include <asm/se.h>
+#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
+#include <asm/se7722.h>
+#endif
 
 /*
- * SolutionEngine
+ * SolutionEngine Seriese
  *
+ * about MS770xSE
  * 0xB8400000 : Common Memory
  * 0xB8500000 : Attribute
  * 0xB8600000 : I/O
+ *
+ * about MS7722SE
+ * 0xB0400000 : Common Memory
+ * 0xB0500000 : Attribute
+ * 0xB0600000 : I/O
  */
 
+#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE) 
 static int __init cf_init_se(void)
 {
 	if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
@@ -109,7 +119,7 @@
 	 *  flag == COMMON/ATTRIBUTE/IO
 	 */
 	/* common window open */
-	ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */
+	ctrl_outw(0x8a84, MRSHPC_MW0CR1);
 	if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
 		/* common mode & bus width 16bit SWAP = 1*/
 		ctrl_outw(0x0b00, MRSHPC_MW0CR2);
@@ -118,7 +128,7 @@
 		ctrl_outw(0x0300, MRSHPC_MW0CR2); 
 
 	/* attribute window open */
-	ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */
+	ctrl_outw(0x8a85, MRSHPC_MW1CR1);
 	if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
 		/* attribute mode & bus width 16bit SWAP = 1*/
 		ctrl_outw(0x0a00, MRSHPC_MW1CR2);
@@ -127,7 +137,7 @@
 		ctrl_outw(0x0200, MRSHPC_MW1CR2);
 
 	/* I/O window open */
-	ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */
+	ctrl_outw(0x8a86, MRSHPC_IOWCR1);
 	ctrl_outw(0x0008, MRSHPC_CDCR);	 /* I/O card mode */
 	if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0)
 		ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/
@@ -143,10 +153,10 @@
 
 int __init cf_init(void)
 {
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
-	if (MACH_SE)
+	if( mach_is_se() || mach_is_7722se() ){
 		return cf_init_se();
-#endif
+	}
+	
 	return cf_init_default();
 }
 
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index abb586b1..014f318 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/clock.c - SuperH clock framework
  *
- *  Copyright (C) 2005, 2006  Paul Mundt
+ *  Copyright (C) 2005, 2006, 2007  Paul Mundt
  *
  * This clock framework is derived from the OMAP version by:
  *
@@ -23,6 +23,7 @@
 #include <linux/seq_file.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/proc_fs.h>
 #include <asm/clock.h>
 #include <asm/timer.h>
 
@@ -98,15 +99,17 @@
 		if (clk->ops && clk->ops->init)
 			clk->ops->init(clk);
 
+	kref_get(&clk->kref);
+
 	if (clk->flags & CLK_ALWAYS_ENABLED)
 		return 0;
 
 	if (likely(clk->ops && clk->ops->enable))
 		clk->ops->enable(clk);
 
-	kref_get(&clk->kref);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -119,6 +122,7 @@
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(clk_enable);
 
 static void clk_kref_release(struct kref *kref)
 {
@@ -127,11 +131,17 @@
 
 void __clk_disable(struct clk *clk)
 {
+	int count = kref_put(&clk->kref, clk_kref_release);
+
 	if (clk->flags & CLK_ALWAYS_ENABLED)
 		return;
 
-	kref_put(&clk->kref, clk_kref_release);
+	if (!count) {	/* count reaches zero, disable the clock */
+		if (likely(clk->ops && clk->ops->disable))
+			clk->ops->disable(clk);
+	}
 }
+EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -141,6 +151,7 @@
 	__clk_disable(clk);
 	spin_unlock_irqrestore(&clock_lock, flags);
 }
+EXPORT_SYMBOL_GPL(clk_disable);
 
 int clk_register(struct clk *clk)
 {
@@ -151,8 +162,18 @@
 
 	mutex_unlock(&clock_list_sem);
 
+	if (clk->flags & CLK_ALWAYS_ENABLED) {
+		pr_debug( "Clock '%s' is ALWAYS_ENABLED\n", clk->name);
+		if (clk->ops && clk->ops->init)
+			clk->ops->init(clk);
+		if (clk->ops && clk->ops->enable)
+			clk->ops->enable(clk);
+		pr_debug( "Enabled.");
+	}
+
 	return 0;
 }
+EXPORT_SYMBOL_GPL(clk_register);
 
 void clk_unregister(struct clk *clk)
 {
@@ -160,21 +181,29 @@
 	list_del(&clk->node);
 	mutex_unlock(&clock_list_sem);
 }
+EXPORT_SYMBOL_GPL(clk_unregister);
 
-inline unsigned long clk_get_rate(struct clk *clk)
+unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->rate;
 }
+EXPORT_SYMBOL_GPL(clk_get_rate);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	return clk_set_rate_ex(clk, rate, 0);
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
+{
 	int ret = -EOPNOTSUPP;
 
 	if (likely(clk->ops && clk->ops->set_rate)) {
 		unsigned long flags;
 
 		spin_lock_irqsave(&clock_lock, flags);
-		ret = clk->ops->set_rate(clk, rate);
+		ret = clk->ops->set_rate(clk, rate, algo_id);
 		spin_unlock_irqrestore(&clock_lock, flags);
 	}
 
@@ -183,6 +212,7 @@
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(clk_set_rate_ex);
 
 void clk_recalc_rate(struct clk *clk)
 {
@@ -197,6 +227,7 @@
 	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
 		propagate_rate(clk);
 }
+EXPORT_SYMBOL_GPL(clk_recalc_rate);
 
 /*
  * Returns a clock. Note that we first try to use device id on the bus
@@ -233,18 +264,43 @@
 
 	return clk;
 }
+EXPORT_SYMBOL_GPL(clk_get);
 
 void clk_put(struct clk *clk)
 {
 	if (clk && !IS_ERR(clk))
 		module_put(clk->owner);
 }
+EXPORT_SYMBOL_GPL(clk_put);
 
 void __init __attribute__ ((weak))
 arch_init_clk_ops(struct clk_ops **ops, int type)
 {
 }
 
+static int show_clocks(char *buf, char **start, off_t off,
+		       int len, int *eof, void *data)
+{
+	struct clk *clk;
+	char *p = buf;
+
+	list_for_each_entry_reverse(clk, &clock_list, node) {
+		unsigned long rate = clk_get_rate(clk);
+
+		/*
+		 * Don't bother listing dummy clocks with no ancestry
+		 * that only support enable and disable ops.
+		 */
+		if (unlikely(!rate && !clk->parent))
+			continue;
+
+		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
+			     rate / 1000000, (rate % 1000000) / 10000);
+	}
+
+	return p - buf;
+}
+
 int __init clk_init(void)
 {
 	int i, ret = 0;
@@ -256,7 +312,6 @@
 
 		arch_init_clk_ops(&clk->ops, i);
 		ret |= clk_register(clk);
-		clk_enable(clk);
 	}
 
 	/* Kick the child clocks.. */
@@ -266,35 +321,14 @@
 	return ret;
 }
 
-int show_clocks(struct seq_file *m)
+static int __init clk_proc_init(void)
 {
-	struct clk *clk;
-
-	list_for_each_entry_reverse(clk, &clock_list, node) {
-		unsigned long rate = clk_get_rate(clk);
-
-		/*
-		 * Don't bother listing dummy clocks with no ancestry
-		 * that only support enable and disable ops.
-		 */
-		if (unlikely(!rate && !clk->parent))
-			continue;
-
-		seq_printf(m, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-			   rate / 1000000, (rate % 1000000) / 10000);
-	}
+	struct proc_dir_entry *p;
+	p = create_proc_read_entry("clocks", S_IRUSR, NULL,
+				   show_clocks, NULL);
+	if (unlikely(!p))
+		return -EINVAL;
 
 	return 0;
 }
-
-EXPORT_SYMBOL_GPL(clk_register);
-EXPORT_SYMBOL_GPL(clk_unregister);
-EXPORT_SYMBOL_GPL(clk_get);
-EXPORT_SYMBOL_GPL(clk_put);
-EXPORT_SYMBOL_GPL(clk_enable);
-EXPORT_SYMBOL_GPL(clk_disable);
-EXPORT_SYMBOL_GPL(__clk_enable);
-EXPORT_SYMBOL_GPL(__clk_disable);
-EXPORT_SYMBOL_GPL(clk_get_rate);
-EXPORT_SYMBOL_GPL(clk_set_rate);
-EXPORT_SYMBOL_GPL(clk_recalc_rate);
+subsys_initcall(clk_proc_init);
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 726acfc..6451ad6 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -41,6 +41,23 @@
 onchip_setup(fpu);
 onchip_setup(dsp);
 
+#ifdef CONFIG_SPECULATIVE_EXECUTION
+#define CPUOPM		0xff2f0000
+#define CPUOPM_RABD	(1 << 5)
+
+static void __init speculative_execution_init(void)
+{
+	/* Clear RABD */
+	ctrl_outl(ctrl_inl(CPUOPM) & ~CPUOPM_RABD, CPUOPM);
+
+	/* Flush the update */
+	(void)ctrl_inl(CPUOPM);
+	ctrl_barrier();
+}
+#else
+#define speculative_execution_init()	do { } while (0)
+#endif
+
 /*
  * Generic first-level cache init
  */
@@ -261,4 +278,6 @@
 	 */
 	ubc_wakeup();
 #endif
+
+	speculative_execution_init();
 }
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 0049d21..1c23308 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -4,6 +4,6 @@
 obj-y	+= imask.o
 
 obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
-obj-$(CONFIG_CPU_HAS_PINT_IRQ)		+= pint.o
+obj-$(CONFIG_CPU_HAS_PINT_IRQ)		+= pint.o 
 obj-$(CONFIG_CPU_HAS_MASKREG_IRQ)	+= maskreg.o
 obj-$(CONFIG_CPU_HAS_INTC2_IRQ)		+= intc2.o
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
index 74defe7..d8e22f4 100644
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -18,7 +18,8 @@
 #define INTC2_BASE	0xfe080000
 #define INTC2_INTMSK	(INTC2_BASE + 0x40)
 #define INTC2_INTMSKCLR	(INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define INTC2_BASE	0xffd40000
 #define INTC2_INTMSK	(INTC2_BASE + 0x38)
 #define INTC2_INTMSKCLR	(INTC2_BASE + 0x3c)
diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c
index f600077..6760268 100644
--- a/arch/sh/kernel/cpu/irq/pint.c
+++ b/arch/sh/kernel/cpu/irq/pint.c
@@ -18,6 +18,58 @@
 #include <asm/io.h>
 #include <asm/machvec.h>
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define INTC_INTER      0xA4000014UL
+#define INTC_IPRD       0xA4000018UL
+#define INTC_ICR2       0xA4000012UL
+
+/* PFC */
+#define PORT_PACR       0xA4000100UL
+#define PORT_PBCR       0xA4000102UL
+#define PORT_PCCR       0xA4000104UL
+#define PORT_PDCR       0xA4000106UL
+#define PORT_PECR       0xA4000108UL
+#define PORT_PFCR       0xA400010AUL
+#define PORT_PGCR       0xA400010CUL
+#define PORT_PHCR       0xA400010EUL
+#define PORT_PJCR       0xA4000110UL
+#define PORT_PKCR       0xA4000112UL
+#define PORT_PLCR       0xA4000114UL
+#define PORT_PMCR       0xA4000118UL
+#define PORT_PNCR       0xA400011AUL
+#define PORT_PECR2      0xA4050148UL
+#define PORT_PFCR2      0xA405014AUL
+#define PORT_PNCR2      0xA405015AUL
+
+/* I/O port */
+#define PORT_PADR       0xA4000120UL
+#define PORT_PBDR       0xA4000122UL
+#define PORT_PCDR       0xA4000124UL
+#define PORT_PDDR       0xA4000126UL
+#define PORT_PEDR       0xA4000128UL
+#define PORT_PFDR       0xA400012AUL
+#define PORT_PGDR       0xA400012CUL
+#define PORT_PHDR       0xA400012EUL
+#define PORT_PJDR       0xA4000130UL
+#define PORT_PKDR       0xA4000132UL
+#define PORT_PLDR       0xA4000134UL
+#define PORT_PMDR       0xA4000138UL
+#define PORT_PNDR       0xA400013AUL
+
+#define PINT0_IRQ       40
+#define PINT8_IRQ       41
+#define PINT_IRQ_BASE   86
+
+#define PINT0_IPR_ADDR          INTC_IPRD
+#define PINT0_IPR_POS           3
+#define PINT0_PRIORITY      2
+
+#define PINT8_IPR_ADDR          INTC_IPRD
+#define PINT8_IPR_POS           2
+#define PINT8_PRIORITY      2
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7705 */
+
 static unsigned char pint_map[256];
 static unsigned long portcr_mask;
 
@@ -126,7 +178,7 @@
 	unsigned long creg, dreg, d, sav;
 
 	if (irq == PINT0_IRQ) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
 		creg = PORT_PACR;
 		dreg = PORT_PADR;
 #else
@@ -144,7 +196,7 @@
 
 		return PINT_IRQ_BASE + pint_map[d];
 	} else if (irq == PINT8_IRQ) {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707)
 		creg = PORT_PBCR;
 		dreg = PORT_PBDR;
 #else
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index 83905e4..09faa05 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -12,6 +12,7 @@
 obj-$(CONFIG_CPU_SUBTYPE_SH7709)	+= setup-sh7709.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7300)	+= setup-sh7300.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7710)	+= setup-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7712)	+= setup-sh7710.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH3)			:= clock-sh3.o
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index 821b0ab..647623b 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -78,6 +78,9 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7710)
 		current_cpu_data.type = CPU_SH7710;
 #endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7712)
+		current_cpu_data.type = CPU_SH7712;
+#endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 		current_cpu_data.type = CPU_SH7705;
 
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index a8e41c5..1983fb7 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -2,6 +2,7 @@
  * SH7705 Setup
  *
  *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -14,15 +15,15 @@
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
-		.mapbase	= 0xa4400000,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.type		= PORT_SCIF,
-		.irqs		= { 52, 53, 55, 54 },
-	}, {
 		.mapbase	= 0xa4410000,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.type		= PORT_SCIF,
-		.irqs		= { 56, 57, 59, 58 },
+		.irqs		= { 56, 57, 59 },
+	}, {
+		.mapbase	= 0xa4400000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 52, 53, 55 },
 	}, {
 		.flags = 0,
 	}
@@ -46,3 +47,48 @@
 				    ARRAY_SIZE(sh7705_devices));
 }
 __initcall(sh7705_devices_setup);
+
+static struct ipr_data sh7705_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, priority */
+	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
+	{ 17, 0,  8, 2 }, /* TMU1 TUNI */
+	{ 18, 0,  4, 2 }, /* TMU2 TUNI */
+	{ 27, 1, 12, 2 }, /* WDT ITI */
+	{ 20, 0,  0, 2 }, /* RTC ATI (alarm) */
+	{ 21, 0,  0, 2 }, /* RTC PRI (period) */
+	{ 22, 0,  0, 2 }, /* RTC CUI (carry) */
+	{ 48, 4, 12, 7 }, /* DMAC DMTE0 */
+	{ 49, 4, 12, 7 }, /* DMAC DMTE1 */
+	{ 50, 4, 12, 7 }, /* DMAC DMTE2 */
+	{ 51, 4, 12, 7 }, /* DMAC DMTE3 */
+	{ 52, 4,  8, 3 }, /* SCIF0 ERI */
+	{ 53, 4,  8, 3 }, /* SCIF0 RXI */
+	{ 55, 4,  8, 3 }, /* SCIF0 TXI */
+	{ 56, 4,  4, 3 }, /* SCIF1 ERI */
+	{ 57, 4,  4, 3 }, /* SCIF1 RXI */
+	{ 59, 4,  4, 3 }, /* SCIF1 TXI */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xFFFFFEE2	/* 0: IPRA */
+,	0xFFFFFEE4	/* 1: IPRB */
+,	0xA4000016	/* 2: IPRC */
+,	0xA4000018	/* 3: IPRD */
+,	0xA400001A	/* 4: IPRE */
+,	0xA4080000	/* 5: IPRF */
+,	0xA4080002	/* 6: IPRG */
+,	0xA4080004	/* 7: IPRH */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (idx >= ARRAY_SIZE(ipr_offsets))
+		return 0;
+	return ipr_offsets[idx];
+}
+
+void __init init_IRQ_ipr()
+{
+	make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map));
+}
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
index dc9b211..c7d7c35 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c
@@ -48,24 +48,33 @@
 static int __init sh7709_devices_setup(void)
 {
 	return platform_add_devices(sh7709_devices,
-				    ARRAY_SIZE(sh7709_devices));
+		ARRAY_SIZE(sh7709_devices));
 }
 __initcall(sh7709_devices_setup);
 
-#define IPRx(A,N) .addr=A, .shift=0*N*-1
+#define IPRx(A,N)	.addr=A, .shift=N
 #define IPRA(N)	IPRx(0xfffffee2UL,N)
 #define IPRB(N)	IPRx(0xfffffee4UL,N)
+#define IPRC(N)	IPRx(0xa4000016UL,N)
+#define IPRD(N)	IPRx(0xa4000018UL,N)
 #define IPRE(N)	IPRx(0xa400001aUL,N)
 
 static struct ipr_data sh7709_ipr_map[] = {
-	[16]		= { IPRA(15-12), 2 }, /* TMU TUNI0 */
-	[17]		= { IPRA(11-8),  4 }, /* TMU TUNI1 */
-	[22]		= { IPRA(3-0),   2 }, /* RTC CUI */
-	[23 ... 26]	= { IPRB(7-4),   3 }, /* SCI */
-	[27]		= { IPRB(15-12), 2 }, /* WDT ITI */
-	[48 ... 51]	= { IPRE(15-12), 7 }, /* DMA */
-	[52 ... 55]	= { IPRE(11-8),  3 }, /* IRDA */
-	[56 ... 59]	= { IPRE(7-4),   3 }, /* SCIF */
+	[16]		= { IPRA(12), 2 }, /* TMU TUNI0 */
+	[17]		= { IPRA(8),  4 }, /* TMU TUNI1 */
+	[18 ... 19]	= { IPRA(4),  1 }, /* TMU TUNI1 */
+	[20 ... 22]	= { IPRA(0),  2 }, /* RTC CUI */
+	[23 ... 26]	= { IPRB(4),  3 }, /* SCI */
+	[27]		= { IPRB(12), 2 }, /* WDT ITI */
+	[32]		= { IPRC(0),  1 }, /* IRQ 0 */
+	[33]		= { IPRC(4),  1 }, /* IRQ 1 */
+	[34]		= { IPRC(8),  1 }, /* IRQ 2 APM */
+	[35]		= { IPRC(12), 1 }, /* IRQ 3 TOUCHSCREEN */
+	[36]		= { IPRD(0),  1 }, /* IRQ 4 */
+	[37]		= { IPRD(4),  1 }, /* IRQ 5 */
+	[48 ... 51]	= { IPRE(12), 7 }, /* DMA */
+	[52 ... 55]	= { IPRE(8),  3 }, /* IRDA */
+	[56 ... 59]	= { IPRE(4),  3 }, /* SCIF */
 };
 
 void __init init_IRQ_ipr()
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 895f99e..51760a7 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -2,6 +2,7 @@
  * SH7710 Setup
  *
  *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -19,6 +20,12 @@
 		.type		= PORT_SCIF,
 		.irqs		= { 52, 53, 55, 54 },
 	}, {
+		.mapbase	= 0xa4420000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs           = { 56, 57, 59, 58 },
+	}, {
+
 		.flags = 0,
 	}
 };
@@ -41,3 +48,56 @@
 				    ARRAY_SIZE(sh7710_devices));
 }
 __initcall(sh7710_devices_setup);
+
+static struct ipr_data sh7710_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, priority */
+	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
+	{ 17, 0,  8, 2 }, /* TMU1 TUNI */
+	{ 18, 0,  4, 2 }, /* TMU2 TUNI */
+	{ 27, 1, 12, 2 }, /* WDT ITI */
+	{ 20, 0,  0, 2 }, /* RTC ATI (alarm) */
+	{ 21, 0,  0, 2 }, /* RTC PRI (period) */
+	{ 22, 0,  0, 2 }, /* RTC CUI (carry) */
+	{ 48, 4, 12, 7 }, /* DMAC DMTE0 */
+	{ 49, 4, 12, 7 }, /* DMAC DMTE1 */
+	{ 50, 4, 12, 7 }, /* DMAC DMTE2 */
+	{ 51, 4, 12, 7 }, /* DMAC DMTE3 */
+	{ 52, 4,  8, 3 }, /* SCIF0 ERI */
+	{ 53, 4,  8, 3 }, /* SCIF0 RXI */
+	{ 54, 4,  8, 3 }, /* SCIF0 BRI */
+	{ 55, 4,  8, 3 }, /* SCIF0 TXI */
+	{ 56, 4,  4, 3 }, /* SCIF1 ERI */
+	{ 57, 4,  4, 3 }, /* SCIF1 RXI */
+	{ 58, 4,  4, 3 }, /* SCIF1 BRI */
+	{ 59, 4,  4, 3 }, /* SCIF1 TXI */
+	{ 76, 5,  8, 7 }, /* DMAC DMTE4 */
+	{ 77, 5,  8, 7 }, /* DMAC DMTE5 */
+	{ 80, 6, 12, 5 }, /* EDMAC EINT0 */
+	{ 81, 6,  8, 5 }, /* EDMAC EINT1 */
+	{ 82, 6,  4, 5 }, /* EDMAC EINT2 */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xA414FEE2	/* 0: IPRA */
+,	0xA414FEE4	/* 1: IPRB */
+,	0xA4140016	/* 2: IPRC */
+,	0xA4140018	/* 3: IPRD */
+,	0xA414001A	/* 4: IPRE */
+,	0xA4080000	/* 5: IPRF */
+,	0xA4080002	/* 6: IPRG */
+,	0xA4080004	/* 7: IPRH */
+,	0xA4080006	/* 8: IPRI */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (idx >= ARRAY_SIZE(ipr_offsets))
+		return 0;
+	return ipr_offsets[idx];
+}
+
+void __init init_IRQ_ipr()
+{
+	make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map));
+}
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index fa2019a..fcb2c41b 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -82,7 +82,8 @@
 	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
 		int divisor = frqcr3_divisors[i];
 
-		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
+		if (clk->ops->set_rate(clk, clk->parent->rate /
+						divisor, 0) == 0)
 			break;
 	}
 
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 58950de..8cd0490 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -124,6 +124,14 @@
 		current_cpu_data.dcache.ways = 4;
 		current_cpu_data.flags |= CPU_HAS_LLSC;
 		break;
+	case 0x3004:
+	case 0x3007:
+		current_cpu_data.type = CPU_SH7785;
+		current_cpu_data.icache.ways = 4;
+		current_cpu_data.dcache.ways = 4;
+		current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+					  CPU_HAS_LLSC;
+		break;
 	case 0x3008:
 		if (prr == 0xa0) {
 			current_cpu_data.type = CPU_SH7722;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a8f493f..ab7422f 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -5,6 +5,7 @@
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
@@ -13,7 +14,8 @@
 clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
 
 obj-y	+= $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
new file mode 100644
index 0000000..2909003
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -0,0 +1,600 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+ *
+ * SH7722 support for the clock framework
+ *
+ * Copyright (c) 2006-2007 Nomad Global Solutions Inc
+ * Based on code for sh7343 by Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+#define SH7722_PLL_FREQ (32000000/8)
+#define N  (-1)
+#define NM (-2)
+#define ROUND_NEAREST 0
+#define ROUND_DOWN -1
+#define ROUND_UP   +1
+
+static int adjust_algos[][3] = {
+	{},	/* NO_CHANGE */
+	{ NM, N, 1 },   /* N:1, N:1 */
+	{ 3, 2, 2 },	/* 3:2:2 */
+	{ 5, 2, 2 },    /* 5:2:2 */
+	{ N, 1, 1 },	/* N:1:1 */
+
+	{ N, 1 },	/* N:1 */
+
+	{ N, 1 },	/* N:1 */
+	{ 3, 2 },
+	{ 4, 3 },
+	{ 5, 4 },
+
+	{ N, 1 }
+};
+
+static unsigned long adjust_pair_of_clocks(unsigned long r1, unsigned long r2,
+			int m1, int m2, int round_flag)
+{
+	unsigned long rem, div;
+	int the_one = 0;
+
+	pr_debug( "Actual values: r1 = %ld\n", r1);
+	pr_debug( "...............r2 = %ld\n", r2);
+
+	if (m1 == m2) {
+		r2 = r1;
+		pr_debug( "setting equal rates: r2 now %ld\n", r2);
+	} else if ((m2 == N  && m1 == 1) ||
+		   (m2 == NM && m1 == N)) { /* N:1 or NM:N */
+		pr_debug( "Setting rates as 1:N (N:N*M)\n");
+		rem = r2 % r1;
+		pr_debug( "...remainder = %ld\n", rem);
+		if (rem) {
+			div = r2 / r1;
+			pr_debug( "...div = %ld\n", div);
+			switch (round_flag) {
+			case ROUND_NEAREST:
+				the_one = rem >= r1/2 ? 1 : 0; break;
+			case ROUND_UP:
+				the_one = 1; break;
+			case ROUND_DOWN:
+				the_one = 0; break;
+			}
+
+			r2 = r1 * (div + the_one);
+			pr_debug( "...setting r2 to %ld\n", r2);
+		}
+	} else if ((m2 == 1  && m1 == N) ||
+		   (m2 == N && m1 == NM)) { /* 1:N or N:NM */
+		pr_debug( "Setting rates as N:1 (N*M:N)\n");
+		rem = r1 % r2;
+		pr_debug( "...remainder = %ld\n", rem);
+		if (rem) {
+			div = r1 / r2;
+			pr_debug( "...div = %ld\n", div);
+			switch (round_flag) {
+			case ROUND_NEAREST:
+				the_one = rem > r2/2 ? 1 : 0; break;
+			case ROUND_UP:
+				the_one = 0; break;
+			case ROUND_DOWN:
+				the_one = 1; break;
+			}
+
+			r2 = r1 / (div + the_one);
+			pr_debug( "...setting r2 to %ld\n", r2);
+		}
+	} else { /* value:value */
+		pr_debug( "Setting rates as %d:%d\n", m1, m2);
+		div = r1 / m1;
+		r2 = div * m2;
+		pr_debug( "...div = %ld\n", div);
+		pr_debug( "...setting r2 to %ld\n", r2);
+	}
+
+	return r2;
+}
+
+static void adjust_clocks(int originate, int *l, unsigned long v[],
+			  int n_in_line)
+{
+	int x;
+
+	pr_debug( "Go down from %d...\n", originate);
+	/* go up recalculation clocks */
+	for (x = originate; x>0; x -- )
+		v[x-1] = adjust_pair_of_clocks(v[x], v[x-1],
+					l[x], l[x-1],
+					ROUND_UP);
+
+	pr_debug( "Go up from %d...\n", originate);
+	/* go down recalculation clocks */
+	for (x = originate; x<n_in_line - 1; x ++ )
+		v[x+1] = adjust_pair_of_clocks(v[x], v[x+1],
+					l[x], l[x+1],
+					ROUND_UP);
+}
+
+
+/*
+ * SH7722 uses a common set of multipliers and divisors, so this
+ * is quite simple..
+ */
+
+/*
+ * Instead of having two separate multipliers/divisors set, like this:
+ *
+ * static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
+ * static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
+ *
+ * I created the divisors2 array, which is used to calculate rate like
+ *   rate = parent * 2 / divisors2[ divisor ];
+*/
+static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk_set_rate(clk, clk_get_rate(clk));
+}
+
+static void master_clk_recalc(struct clk *clk)
+{
+	unsigned long frqcr = ctrl_inl(FRQCR);
+
+	clk->rate = CONFIG_SH_PCLK_FREQ * (1 + (frqcr >> 24 & 0xF));
+}
+
+static int master_clk_setrate(struct clk *clk, unsigned long rate, int id)
+{
+	int div = rate / SH7722_PLL_FREQ;
+	int master_divs[] = { 2, 3, 4, 6, 8, 16 };
+	int index;
+	unsigned long frqcr;
+
+	if (rate < SH7722_PLL_FREQ * 2)
+		return -EINVAL;
+
+	for (index = 1; index < ARRAY_SIZE(master_divs); index++)
+		if (div >= master_divs[index - 1] && div < master_divs[index])
+			break;
+
+	if (index >= ARRAY_SIZE(master_divs))
+		index = ARRAY_SIZE(master_divs);
+	div = master_divs[index - 1];
+
+	frqcr = ctrl_inl(FRQCR);
+	frqcr &= ~(0xF << 24);
+	frqcr |= ( (div-1) << 24);
+	ctrl_outl(frqcr, FRQCR);
+
+	return 0;
+}
+
+static struct clk_ops sh7722_master_clk_ops = {
+	.init = master_clk_init,
+	.recalc = master_clk_recalc,
+	.set_rate = master_clk_setrate,
+};
+
+struct frqcr_context {
+	unsigned mask;
+	unsigned shift;
+};
+
+struct frqcr_context sh7722_get_clk_context(const char *name)
+{
+	struct frqcr_context ctx = { 0, };
+
+	if (!strcmp(name, "peripheral_clk")) {
+		ctx.shift = 0;
+		ctx.mask = 0xF;
+	} else if (!strcmp(name, "sdram_clk")) {
+		ctx.shift = 4;
+		ctx.mask = 0xF;
+	} else if (!strcmp(name, "bus_clk")) {
+		ctx.shift = 8;
+		ctx.mask = 0xF;
+	} else if (!strcmp(name, "sh_clk")) {
+		ctx.shift = 12;
+		ctx.mask = 0xF;
+	} else if (!strcmp(name, "umem_clk")) {
+		ctx.shift = 16;
+		ctx.mask = 0xF;
+	} else if (!strcmp(name, "cpu_clk")) {
+		ctx.shift = 20;
+		ctx.mask = 7;
+	}
+	return ctx;
+}
+
+/**
+ * sh7722_find_divisors - find divisor for setting rate
+ *
+ * All sh7722 clocks use the same set of multipliers/divisors. This function
+ * chooses correct divisor to set the rate of clock with parent clock that
+ * generates frequency of 'parent_rate'
+ *
+ * @parent_rate: rate of parent clock
+ * @rate: requested rate to be set
+ */
+static int sh7722_find_divisors(unsigned long parent_rate, unsigned rate)
+{
+	unsigned div2 = parent_rate * 2 / rate;
+	int index;
+
+	if (rate > parent_rate)
+		return -EINVAL;
+
+	for (index = 1; index < ARRAY_SIZE(divisors2); index++) {
+		if (div2 > divisors2[index] && div2 <= divisors2[index])
+			break;
+	}
+	if (index >= ARRAY_SIZE(divisors2))
+		index = ARRAY_SIZE(divisors2) - 1;
+	return divisors2[index];
+}
+
+static void sh7722_frqcr_recalc(struct clk *clk)
+{
+	struct frqcr_context ctx = sh7722_get_clk_context(clk->name);
+	unsigned long frqcr = ctrl_inl(FRQCR);
+	int index;
+
+	index = (frqcr >> ctx.shift) & ctx.mask;
+	clk->rate = clk->parent->rate * 2 / divisors2[index];
+}
+
+static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate,
+				 int algo_id)
+{
+	struct frqcr_context ctx = sh7722_get_clk_context(clk->name);
+	unsigned long parent_rate = clk->parent->rate;
+	int div;
+	unsigned long frqcr;
+	int err = 0;
+
+	/* pretty invalid */
+	if (parent_rate < rate)
+		return -EINVAL;
+
+	/* look for multiplier/divisor pair */
+	div = sh7722_find_divisors(parent_rate, rate);
+	if (div<0)
+		return div;
+
+	/* calculate new value of clock rate */
+	clk->rate = parent_rate * 2 / div;
+	frqcr = ctrl_inl(FRQCR);
+
+	/* FIXME: adjust as algo_id specifies */
+	if (algo_id != NO_CHANGE) {
+		int originator;
+		char *algo_group_1[] = { "cpu_clk", "umem_clk", "sh_clk" };
+		char *algo_group_2[] = { "sh_clk", "bus_clk" };
+		char *algo_group_3[] = { "sh_clk", "sdram_clk" };
+		char *algo_group_4[] = { "bus_clk", "peripheral_clk" };
+		char *algo_group_5[] = { "cpu_clk", "peripheral_clk" };
+		char **algo_current = NULL;
+		/* 3 is the maximum number of clocks in relation */
+		struct clk *ck[3];
+		unsigned long values[3]; /* the same comment as above */
+		int part_length = -1;
+		int i;
+
+		/*
+		 * all the steps below only required if adjustion was
+		 * requested
+		 */
+		if (algo_id == IUS_N1_N1 ||
+		    algo_id == IUS_322 ||
+		    algo_id == IUS_522 ||
+		    algo_id == IUS_N11) {
+			algo_current = algo_group_1;
+			part_length = 3;
+		}
+		if (algo_id == SB_N1) {
+			algo_current = algo_group_2;
+			part_length = 2;
+		}
+		if (algo_id == SB3_N1 ||
+		    algo_id == SB3_32 ||
+		    algo_id == SB3_43 ||
+		    algo_id == SB3_54) {
+			algo_current = algo_group_3;
+			part_length = 2;
+		}
+		if (algo_id == BP_N1) {
+			algo_current = algo_group_4;
+			part_length = 2;
+		}
+		if (algo_id == IP_N1) {
+			algo_current = algo_group_5;
+			part_length = 2;
+		}
+		if (!algo_current)
+			goto incorrect_algo_id;
+
+		originator = -1;
+		for (i = 0; i < part_length; i ++ ) {
+			if (originator >= 0 && !strcmp(clk->name,
+						       algo_current[i]))
+				originator = i;
+			ck[i] = clk_get(NULL, algo_current[i]);
+			values[i] = clk_get_rate(ck[i]);
+		}
+
+		if (originator >= 0)
+			adjust_clocks(originator, adjust_algos[algo_id],
+				      values, part_length);
+
+		for (i = 0; i < part_length; i ++ ) {
+			struct frqcr_context part_ctx;
+			int part_div;
+
+			if (likely(!err)) {
+				part_div = sh7722_find_divisors(parent_rate,
+								rate);
+				if (part_div > 0) {
+					part_ctx = sh7722_get_clk_context(
+								ck[i]->name);
+					frqcr &= ~(part_ctx.mask <<
+						   part_ctx.shift);
+					frqcr |= part_div << part_ctx.shift;
+				} else
+					err = part_div;
+			}
+
+			ck[i]->ops->recalc(ck[i]);
+			clk_put(ck[i]);
+		}
+	}
+
+	/* was there any error during recalculation ? If so, bail out.. */
+	if (unlikely(err!=0))
+		goto out_err;
+
+	/* clear FRQCR bits */
+	frqcr &= ~(ctx.mask << ctx.shift);
+	frqcr |= div << ctx.shift;
+
+	/* ...and perform actual change */
+	ctrl_outl(frqcr, FRQCR);
+	return 0;
+
+incorrect_algo_id:
+	return -EINVAL;
+out_err:
+	return err;
+}
+
+static struct clk_ops sh7722_frqcr_clk_ops = {
+	.recalc = sh7722_frqcr_recalc,
+	.set_rate = sh7722_frqcr_set_rate,
+};
+
+/*
+ * clock ops methods for SIU A/B and IrDA clock
+ *
+ */
+static int sh7722_siu_which(struct clk *clk)
+{
+	if (!strcmp(clk->name, "siu_a_clk"))
+		return 0;
+	if (!strcmp(clk->name, "siu_b_clk"))
+		return 1;
+	if (!strcmp(clk->name, "irda_clk"))
+		return 2;
+	return -EINVAL;
+}
+
+static unsigned long sh7722_siu_regs[] = {
+	[0] = SCLKACR,
+	[1] = SCLKBCR,
+	[2] = IrDACLKCR,
+};
+
+static int sh7722_siu_start_stop(struct clk *clk, int enable)
+{
+	int siu = sh7722_siu_which(clk);
+	unsigned long r;
+
+	if (siu < 0)
+		return siu;
+	BUG_ON(siu > 2);
+	r = ctrl_inl(sh7722_siu_regs[siu]);
+	if (enable)
+		ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+	else
+		ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+	return 0;
+}
+
+static void sh7722_siu_enable(struct clk *clk)
+{
+	sh7722_siu_start_stop(clk, 1);
+}
+
+static void sh7722_siu_disable(struct clk *clk)
+{
+	sh7722_siu_start_stop(clk, 0);
+}
+
+static void sh7722_video_enable(struct clk *clk)
+{
+	unsigned long r;
+
+	r = ctrl_inl(VCLKCR);
+	ctrl_outl( r & ~(1<<8), VCLKCR);
+}
+
+static void sh7722_video_disable(struct clk *clk)
+{
+	unsigned long r;
+
+	r = ctrl_inl(VCLKCR);
+	ctrl_outl( r | (1<<8), VCLKCR);
+}
+
+static int sh7722_video_set_rate(struct clk *clk, unsigned long rate,
+				 int algo_id)
+{
+	unsigned long r;
+
+	r = ctrl_inl(VCLKCR);
+	r &= ~0x3F;
+	r |= ((clk->parent->rate / rate - 1) & 0x3F);
+	ctrl_outl(r, VCLKCR);
+	return 0;
+}
+
+static void sh7722_video_recalc(struct clk *clk)
+{
+	unsigned long r;
+
+	r = ctrl_inl(VCLKCR);
+	clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
+}
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+{
+	int siu = sh7722_siu_which(clk);
+	unsigned long r;
+	int div;
+
+	if (siu < 0)
+		return siu;
+	BUG_ON(siu > 2);
+	r = ctrl_inl(sh7722_siu_regs[siu]);
+	div = sh7722_find_divisors(clk->parent->rate, rate);
+	if (div < 0)
+		return div;
+	r = (r & ~0xF) | div;
+	ctrl_outl(r, sh7722_siu_regs[siu]);
+	return 0;
+}
+
+static void sh7722_siu_recalc(struct clk *clk)
+{
+	int siu = sh7722_siu_which(clk);
+	unsigned long r;
+
+	if (siu < 0)
+		return /* siu */ ;
+	BUG_ON(siu > 1);
+	r = ctrl_inl(sh7722_siu_regs[siu]);
+	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
+
+static struct clk_ops sh7722_siu_clk_ops = {
+	.recalc = sh7722_siu_recalc,
+	.set_rate = sh7722_siu_set_rate,
+	.enable = sh7722_siu_enable,
+	.disable = sh7722_siu_disable,
+};
+
+static struct clk_ops sh7722_video_clk_ops = {
+	.recalc = sh7722_video_recalc,
+	.set_rate = sh7722_video_set_rate,
+	.enable = sh7722_video_enable,
+	.disable = sh7722_video_disable,
+};
+/*
+ * and at last, clock definitions themselves
+ */
+static struct clk sh7722_umem_clock = {
+	.name = "umem_clk",
+	.ops = &sh7722_frqcr_clk_ops,
+};
+
+static struct clk sh7722_sh_clock = {
+	.name = "sh_clk",
+	.ops = &sh7722_frqcr_clk_ops,
+};
+
+static struct clk sh7722_peripheral_clock = {
+	.name = "peripheral_clk",
+	.ops = &sh7722_frqcr_clk_ops,
+};
+
+static struct clk sh7722_sdram_clock = {
+	.name = "sdram_clk",
+	.ops = &sh7722_frqcr_clk_ops,
+};
+
+/*
+ * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
+ * methods of clk_ops determine which register they should access by
+ * examining clk->name field
+ */
+static struct clk sh7722_siu_a_clock = {
+	.name = "siu_a_clk",
+	.ops = &sh7722_siu_clk_ops,
+};
+
+static struct clk sh7722_siu_b_clock = {
+	.name = "siu_b_clk",
+	.ops = &sh7722_siu_clk_ops,
+};
+
+static struct clk sh7722_irda_clock = {
+	.name = "irda_clk",
+	.ops = &sh7722_siu_clk_ops,
+};
+
+static struct clk sh7722_video_clock = {
+	.name = "video_clk",
+	.ops = &sh7722_video_clk_ops,
+};
+
+static struct clk *sh7722_clocks[] = {
+	&sh7722_umem_clock,
+	&sh7722_sh_clock,
+	&sh7722_peripheral_clock,
+	&sh7722_sdram_clock,
+	&sh7722_siu_a_clock,
+	&sh7722_siu_b_clock,
+	&sh7722_irda_clock,
+	&sh7722_video_clock,
+};
+
+/*
+ * init in order: master, module, bus, cpu
+ */
+struct clk_ops *onchip_ops[] = {
+	&sh7722_master_clk_ops,
+	&sh7722_frqcr_clk_ops,
+	&sh7722_frqcr_clk_ops,
+	&sh7722_frqcr_clk_ops,
+};
+
+void __init
+arch_init_clk_ops(struct clk_ops **ops, int type)
+{
+	BUG_ON(type < 0 || type > ARRAY_SIZE(onchip_ops));
+	*ops = onchip_ops[type];
+}
+
+int __init sh7722_clock_init(void)
+{
+	struct clk *master;
+	int i;
+
+	master = clk_get(NULL, "master_clk");
+	for (i = 0; i < ARRAY_SIZE(sh7722_clocks); i++) {
+		pr_debug( "Registering clock '%s'\n", sh7722_clocks[i]->name);
+		sh7722_clocks[i]->parent = master;
+		clk_register(sh7722_clocks[i]);
+	}
+	clk_put(master);
+	return 0;
+}
+arch_initcall(sh7722_clock_init);
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
new file mode 100644
index 0000000..805535a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -0,0 +1,162 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+ *
+ * SH7785 support for the clock framework
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4, 6 };
+static int ufc_divisors[] = { 1, 1, 4, 6 };
+static int sfc_divisors[] = { 1, 1, 4, 6 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18,
+			     24, 32, 36, 48, 1, 1, 1, 1 };
+static int mfc_divisors[] = { 1, 1, 4, 6 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18,
+			      24, 32, 36, 48, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= 36;
+}
+
+static struct clk_ops sh7785_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQMR1) & 0x000f);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
+	clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7785_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7785_clk_ops[] = {
+	&sh7785_master_clk_ops,
+	&sh7785_module_clk_ops,
+	&sh7785_bus_clk_ops,
+	&sh7785_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7785_clk_ops))
+		*ops = sh7785_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
+	clk->rate = clk->parent->rate / sfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk sh7785_shyway_clk = {
+	.name		= "shyway_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &sh7785_shyway_clk_ops,
+};
+
+static void ddr_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
+	clk->rate = clk->parent->rate / mfc_divisors[idx];
+}
+
+static struct clk_ops sh7785_ddr_clk_ops = {
+	.recalc		= ddr_clk_recalc,
+};
+
+static struct clk sh7785_ddr_clk = {
+	.name		= "ddr_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &sh7785_ddr_clk_ops,
+};
+
+static void ram_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQMR1) >> 24) & 0x0003);
+	clk->rate = clk->parent->rate / ufc_divisors[idx];
+}
+
+static struct clk_ops sh7785_ram_clk_ops = {
+	.recalc		= ram_clk_recalc,
+};
+
+static struct clk sh7785_ram_clk = {
+	.name		= "ram_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &sh7785_ram_clk_ops,
+};
+
+/*
+ * Additional SH7785-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7785_onchip_clocks[] = {
+	&sh7785_shyway_clk,
+	&sh7785_ddr_clk,
+	&sh7785_ram_clk,
+};
+
+static int __init sh7785_clk_init(void)
+{
+	struct clk *clk = clk_get(NULL, "master_clk");
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sh7785_onchip_clocks); i++) {
+		struct clk *clkp = sh7785_onchip_clocks[i];
+
+		clkp->parent = clk;
+		clk_register(clkp);
+		clk_enable(clkp);
+	}
+
+	/*
+	 * Now that we have the rest of the clocks registered, we need to
+	 * force the parent clock to propagate so that these clocks will
+	 * automatically figure out their rate. We cheat by handing the
+	 * parent clock its current rate and forcing child propagation.
+	 */
+	clk_set_rate(clk, clk_get_rate(clk));
+
+	clk_put(clk);
+
+	return 0;
+}
+arch_initcall(sh7785_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
new file mode 100644
index 0000000..07b0de8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -0,0 +1,103 @@
+/*
+ * SH7785 Setup
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffea0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	}, {
+		.mapbase	= 0xffeb0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 44, 45, 47, 46 },
+	},
+
+	/*
+	 * The rest of these all have multiplexed IRQs
+	 */
+	{
+		.mapbase	= 0xffec0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 60, 60, 60, 60 },
+	}, {
+		.mapbase	= 0xffed0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 61, 61, 61, 61 },
+	}, {
+		.mapbase	= 0xffee0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 62, 62, 62, 62 },
+	}, {
+		.mapbase	= 0xffef0000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 63, 63, 63, 63 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7785_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh7785_devices_setup(void)
+{
+	return platform_add_devices(sh7785_devices,
+				    ARRAY_SIZE(sh7785_devices));
+}
+__initcall(sh7785_devices_setup);
+
+static struct intc2_data intc2_irq_table[] = {
+	{ 28, 0, 24, 0, 0, 2 },		/* TMU0 */
+
+	{ 40, 8, 24, 0, 2, 3 },		/* SCIF0 ERI */
+	{ 41, 8, 24, 0, 2, 3 },		/* SCIF0 RXI */
+	{ 42, 8, 24, 0, 2, 3 },		/* SCIF0 BRI */
+	{ 43, 8, 24, 0, 2, 3 },		/* SCIF0 TXI */
+
+	{ 44, 8, 16, 0, 3, 3 },		/* SCIF1 ERI */
+	{ 45, 8, 16, 0, 3, 3 },		/* SCIF1 RXI */
+	{ 46, 8, 16, 0, 3, 3 },		/* SCIF1 BRI */
+	{ 47, 8, 16, 0, 3, 3 },		/* SCIF1 TXI */
+
+	{ 64, 0x14,  8, 0, 14, 2 },	/* PCIC0 */
+	{ 65, 0x14,  0, 0, 15, 2 },	/* PCIC1 */
+	{ 66, 0x18, 24, 0, 16, 2 },	/* PCIC2 */
+	{ 67, 0x18, 16, 0, 17, 2 },	/* PCIC3 */
+	{ 68, 0x18,  8, 0, 18, 2 },	/* PCIC4 */
+
+	{ 60,  8,  8, 0, 4, 3 },	/* SCIF2 ERI, RXI, BRI, TXI */
+	{ 60,  8,  0, 0, 5, 3 },	/* SCIF3 ERI, RXI, BRI, TXI */
+	{ 60, 12, 24, 0, 6, 3 },	/* SCIF4 ERI, RXI, BRI, TXI */
+	{ 60, 12, 16, 0, 7, 3 },	/* SCIF5 ERI, RXI, BRI, TXI */
+};
+
+void __init init_IRQ_intc2(void)
+{
+	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+}
diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c
new file mode 100644
index 0000000..4a2ecbe
--- /dev/null
+++ b/arch/sh/kernel/crash_dump.c
@@ -0,0 +1,46 @@
+/*
+ *	crash_dump.c - Memory preserving reboot related code.
+ *
+ *	Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ *	Copyright (C) IBM Corporation, 2004. All rights reserved
+ */
+
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/io.h>
+#include <asm/uaccess.h>
+
+/**
+ * copy_oldmem_page - copy one page from "oldmem"
+ * @pfn: page frame number to be copied
+ * @buf: target memory address for the copy; this can be in kernel address
+ *	space or user address space (see @userbuf)
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page (based on pfn) to begin the copy
+ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
+ *	otherwise @buf is in kernel address space, use memcpy().
+ *
+ * Copy a page from "oldmem". For this page, there is no pte mapped
+ * in the current kernel. We stitch up a pte, similar to kmap_atomic.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+                               size_t csize, unsigned long offset, int userbuf)
+{
+	void  *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+
+	if (userbuf) {
+		if (copy_to_user(buf, (vaddr + offset), csize)) {
+			iounmap(vaddr);
+			return -EFAULT;
+		}
+	} else
+	memcpy(buf, (vaddr + offset), csize);
+
+	iounmap(vaddr);
+	return csize;
+}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 9bdd8a0..27b923c 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -13,6 +13,7 @@
 #include <linux/seq_file.h>
 #include <linux/irq.h>
 #include <asm/processor.h>
+#include <asm/machvec.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
 #include <asm/cpu/mmu_context.h>
@@ -44,7 +45,7 @@
 		seq_putc(p, '\n');
 	}
 
-	if (i < NR_IRQS) {
+	if (i < sh_mv.mv_nr_irqs) {
 		spin_lock_irqsave(&irq_desc[i].lock, flags);
 		action = irq_desc[i].action;
 		if (!action)
@@ -61,7 +62,7 @@
 		seq_putc(p, '\n');
 unlock:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS)
+	} else if (i == sh_mv.mv_nr_irqs)
 		seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
 
 	return 0;
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d8927d8..a532336 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -6,11 +6,11 @@
  * David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>,
  * Amit S. Kale <akale@veritas.com>,  William Gatliff <bgat@open-widgets.com>,
  * Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>.
- * 
+ *
  * This version by Henry Bell <henry.bell@st.com>
  * Minor modifications by Jeremy Siegel <jsiegel@mvista.com>
- * 
- * Contains low-level support for remote debug using GDB. 
+ *
+ * Contains low-level support for remote debug using GDB.
  *
  * To enable debugger support, two things need to happen. A call to
  * set_debug_traps() is necessary in order to allow any breakpoints
@@ -48,7 +48,7 @@
  *    k             kill (Detach GDB)
  *
  *    d             Toggle debug flag
- *    D             Detach GDB 
+ *    D             Detach GDB
  *
  *    Hct           Set thread t for operations,           OK or ENN
  *                  c = 'c' (step, cont), c = 'g' (other
@@ -58,7 +58,7 @@
  *    qfThreadInfo  Get list of current threads (first)    m<id>
  *    qsThreadInfo   "    "  "     "      "   (subsequent)
  *    qOffsets      Get section offsets                  Text=x;Data=y;Bss=z
- * 
+ *
  *    TXX           Find if thread XX is alive             OK or ENN
  *    ?             What was the last sigval ?             SNN   (signal NN)
  *    O             Output to GDB console
@@ -74,7 +74,7 @@
  *       '$' or '#'.  If <data> starts with two characters followed by
  *       ':', then the existing stubs interpret this as a sequence number.
  *
- *       CSUM1 and CSUM2 are ascii hex representation of an 8-bit 
+ *       CSUM1 and CSUM2 are ascii hex representation of an 8-bit
  *       checksum of <data>, the most significant nibble is sent first.
  *       the hex digits 0-9,a-f are used.
  *
@@ -86,8 +86,8 @@
  * Responses can be run-length encoded to save space.  A '*' means that
  * the next character is an ASCII encoding giving a repeat count which
  * stands for that many repititions of the character preceding the '*'.
- * The encoding is n+29, yielding a printable character where n >=3 
- * (which is where RLE starts to win).  Don't use an n > 126. 
+ * The encoding is n+29, yielding a printable character where n >=3
+ * (which is where RLE starts to win).  Don't use an n > 126.
  *
  * So "0* " means the same as "0000".
  */
@@ -100,12 +100,10 @@
 #include <linux/delay.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
-
-#ifdef CONFIG_SH_KGDB_CONSOLE
 #include <linux/console.h>
-#endif
-
+#include <linux/sysrq.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 #include <asm/current.h>
 #include <asm/signal.h>
 #include <asm/pgtable.h>
@@ -153,7 +151,6 @@
 char in_nmi;			/* Set during NMI to prevent reentry */
 int kgdb_nofault;		/* Boolean to ignore bus errs (i.e. in GDB) */
 int kgdb_enabled = 1;		/* Default to enabled, cmdline can disable */
-int kgdb_halt;
 
 /* Exposed for user access */
 struct task_struct *kgdb_current;
@@ -246,14 +243,6 @@
 
 static void kgdb_to_gdb(const char *s);
 
-#ifdef CONFIG_KGDB_THREAD
-static struct task_struct *trapped_thread;
-static struct task_struct *current_thread;
-typedef unsigned char threadref[8];
-#define BUF_THREAD_ID_SIZE 16
-#endif
-
-
 /* Convert ch to hex */
 static int hex(const char ch)
 {
@@ -328,7 +317,7 @@
 }
 
 /*  Copy the binary array pointed to by buf into mem.  Fix $, #,
-    and 0x7d escaped with 0x7d.  Return a pointer to the character 
+    and 0x7d escaped with 0x7d.  Return a pointer to the character
     after the last byte written. */
 static char *ebin_to_mem(const char *buf, char *mem, int count)
 {
@@ -349,66 +338,6 @@
 	return pkt;
 }
 
-#ifdef CONFIG_KGDB_THREAD
-
-/* Pack a thread ID */
-static char *pack_threadid(char *pkt, threadref * id)
-{
-	char *limit;
-	unsigned char *altid;
-
-	altid = (unsigned char *) id;
-
-	limit = pkt + BUF_THREAD_ID_SIZE;
-	while (pkt < limit)
-		pkt = pack_hex_byte(pkt, *altid++);
-	return pkt;
-}
-
-/* Convert an integer into our threadref */
-static void int_to_threadref(threadref * id, const int value)
-{
-	unsigned char *scan = (unsigned char *) id;
-	int i = 4;
-
-	while (i--)
-		*scan++ = 0;
-
-	*scan++ = (value >> 24) & 0xff;
-	*scan++ = (value >> 16) & 0xff;
-	*scan++ = (value >> 8) & 0xff;
-	*scan++ = (value & 0xff);
-}
-
-/* Return a task structure ptr for a particular pid */
-static struct task_struct *get_thread(int pid)
-{
-	struct task_struct *thread;
-
-	/* Use PID_MAX w/gdb for pid 0 */
-	if (pid == PID_MAX) pid = 0;
-
-	/* First check via PID */
-	thread = find_task_by_pid(pid);
-
-	if (thread)
-		return thread;
-
-	/* Start at the start */
-	thread = init_tasks[0];
-
-	/* Walk along the linked list of tasks */
-	do {
-		if (thread->pid == pid)
-			return thread;
-		thread = thread->next_task;
-	} while (thread != init_tasks[0]);
-
-	return NULL;
-}
-
-#endif /* CONFIG_KGDB_THREAD */
-
 /* Scan for the start char '$', read the packet and check the checksum */
 static void get_packet(char *buffer, int buflen)
 {
@@ -452,7 +381,7 @@
 				/* Ack successful transfer */
 				put_debug_char('+');
 
-				/* If a sequence char is present, reply 
+				/* If a sequence char is present, reply
 				   the sequence ID */
 				if (buffer[2] == ':') {
 					put_debug_char(buffer[0]);
@@ -611,74 +540,6 @@
 	regs->vbr = gdb_regs[VBR];
 }
 
-#ifdef CONFIG_KGDB_THREAD
-/* Make a local copy of registers from the specified thread */
-asmlinkage void ret_from_fork(void);
-static void thread_regs_to_gdb_regs(const struct task_struct *thread,
-				    int *gdb_regs)
-{
-	int regno;
-	int *tregs;
-
-	/* Initialize to zero */
-	for (regno = 0; regno < MAXREG; regno++)
-		gdb_regs[regno] = 0;
-
-	/* Just making sure... */
-	if (thread == NULL)
-		return;
-
-	/* A new fork has pt_regs on the stack from a fork() call */
-	if (thread->thread.pc == (unsigned long)ret_from_fork) {
-
-		int vbr_val;
-		struct pt_regs *kregs;
-		kregs = (struct pt_regs*)thread->thread.sp;
-
-		gdb_regs[R0] = kregs->regs[R0];
-		gdb_regs[R1] = kregs->regs[R1];
-		gdb_regs[R2] = kregs->regs[R2];
-		gdb_regs[R3] = kregs->regs[R3];
-		gdb_regs[R4] = kregs->regs[R4];
-		gdb_regs[R5] = kregs->regs[R5];
-		gdb_regs[R6] = kregs->regs[R6];
-		gdb_regs[R7] = kregs->regs[R7];
-		gdb_regs[R8] = kregs->regs[R8];
-		gdb_regs[R9] = kregs->regs[R9];
-		gdb_regs[R10] = kregs->regs[R10];
-		gdb_regs[R11] = kregs->regs[R11];
-		gdb_regs[R12] = kregs->regs[R12];
-		gdb_regs[R13] = kregs->regs[R13];
-		gdb_regs[R14] = kregs->regs[R14];
-		gdb_regs[R15] = kregs->regs[R15];
-		gdb_regs[PC] = kregs->pc;
-		gdb_regs[PR] = kregs->pr;
-		gdb_regs[GBR] = kregs->gbr;
-		gdb_regs[MACH] = kregs->mach;
-		gdb_regs[MACL] = kregs->macl;
-		gdb_regs[SR] = kregs->sr;
-
-		asm("stc vbr, %0":"=r"(vbr_val));
-		gdb_regs[VBR] = vbr_val;
-		return;
-	}
-
-	/* Otherwise, we have only some registers from switch_to() */
-	tregs = (int *)thread->thread.sp;
-	gdb_regs[R15] = (int)tregs;
-	gdb_regs[R14] = *tregs++;
-	gdb_regs[R13] = *tregs++;
-	gdb_regs[R12] = *tregs++;
-	gdb_regs[R11] = *tregs++;
-	gdb_regs[R10] = *tregs++;
-	gdb_regs[R9] = *tregs++;
-	gdb_regs[R8] = *tregs++;
-	gdb_regs[PR] = *tregs++;
-	gdb_regs[GBR] = *tregs++;
-	gdb_regs[PC] = thread->thread.pc;
-}
-#endif /* CONFIG_KGDB_THREAD */
-
 /* Calculate the new address for after a step */
 static short *get_step_address(void)
 {
@@ -759,7 +620,7 @@
 	return (short *) addr;
 }
 
-/* Set up a single-step.  Replace the instruction immediately after the 
+/* Set up a single-step.  Replace the instruction immediately after the
    current instruction (i.e. next in the expected flow of control) with a
    trap instruction, so that returning will cause only a single instruction
    to be executed. Note that this model is slightly broken for instructions
@@ -797,37 +658,11 @@
 /* Send a signal message */
 static void send_signal_msg(const int signum)
 {
-#ifndef CONFIG_KGDB_THREAD
 	out_buffer[0] = 'S';
 	out_buffer[1] = highhex(signum);
 	out_buffer[2] = lowhex(signum);
 	out_buffer[3] = 0;
 	put_packet(out_buffer);
-#else /* CONFIG_KGDB_THREAD */
-	int threadid;
-	threadref thref;
-	char *out = out_buffer;
-	const char *tstring = "thread";
-
-	*out++ = 'T';
-	*out++ = highhex(signum);
-	*out++ = lowhex(signum);
-
-	while (*tstring) {
-		*out++ = *tstring++;
-	}
-	*out++ = ':';
-
-	threadid = trapped_thread->pid;
-	if (threadid == 0) threadid = PID_MAX;
-	int_to_threadref(&thref, threadid);
-	pack_threadid(out, &thref);
-	out += BUF_THREAD_ID_SIZE;
-	*out++ = ';';
-
-	*out = 0;
-	put_packet(out_buffer);
-#endif /* CONFIG_KGDB_THREAD */
 }
 
 /* Reply that all was well */
@@ -962,15 +797,7 @@
 /* Send register contents */
 static void send_regs_msg(void)
 {
-#ifdef CONFIG_KGDB_THREAD
-	if (!current_thread)
-		kgdb_regs_to_gdb_regs(&trap_registers, registers);
-	else
-		thread_regs_to_gdb_regs(current_thread, registers);
-#else
 	kgdb_regs_to_gdb_regs(&trap_registers, registers);
-#endif
-
 	mem_to_hex((char *) registers, out_buffer, NUMREGBYTES);
 	put_packet(out_buffer);
 }
@@ -978,201 +805,13 @@
 /* Set register contents - currently can't set other thread's registers */
 static void set_regs_msg(void)
 {
-#ifdef CONFIG_KGDB_THREAD
-	if (!current_thread) {
-#endif
-		kgdb_regs_to_gdb_regs(&trap_registers, registers);
-		hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
-		gdb_regs_to_kgdb_regs(registers, &trap_registers);
-		send_ok_msg();
-#ifdef CONFIG_KGDB_THREAD
-	} else
-		send_err_msg();
-#endif
+	kgdb_regs_to_gdb_regs(&trap_registers, registers);
+	hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES);
+	gdb_regs_to_kgdb_regs(registers, &trap_registers);
+	send_ok_msg();
 }
 
-
-#ifdef CONFIG_KGDB_THREAD
-
-/* Set the status for a thread */
-void set_thread_msg(void)
-{
-	int threadid;
-	struct task_struct *thread = NULL;
-	char *ptr;
-
-	switch (in_buffer[1]) {
-
-       	/* To select which thread for gG etc messages, i.e. supported */
-	case 'g':
-
-		ptr = &in_buffer[2];
-		hex_to_int(&ptr, &threadid);
-		thread = get_thread(threadid);
-
-		/* If we haven't found it */
-		if (!thread) {
-			send_err_msg();
-			break;
-		}
-
-		/* Set current_thread (or not) */
-		if (thread == trapped_thread)
-			current_thread = NULL;
-		else
-			current_thread = thread;
-		send_ok_msg();
-		break;
-
-	/* To select which thread for cCsS messages, i.e. unsupported */
-	case 'c':
-		send_ok_msg();
-		break;
-
-	default:
-		send_empty_msg();
-		break;
-	}
-}
-
-/* Is a thread alive? */
-static void thread_status_msg(void)
-{
-	char *ptr;
-	int threadid;
-	struct task_struct *thread = NULL;
-
-	ptr = &in_buffer[1];
-	hex_to_int(&ptr, &threadid);
-	thread = get_thread(threadid);
-	if (thread)
-		send_ok_msg();
-	else
-		send_err_msg();
-}
-/* Send the current thread ID */
-static void thread_id_msg(void)
-{
-	int threadid;
-	threadref thref;
-
-	out_buffer[0] = 'Q';
-	out_buffer[1] = 'C';
-
-	if (current_thread)
-		threadid = current_thread->pid;
-	else if (trapped_thread)
-		threadid = trapped_thread->pid;
-	else /* Impossible, but just in case! */
-	{
-		send_err_msg();
-		return;
-	}
-
-	/* Translate pid 0 to PID_MAX for gdb */
-	if (threadid == 0) threadid = PID_MAX;
-
-	int_to_threadref(&thref, threadid);
-	pack_threadid(out_buffer + 2, &thref);
-	out_buffer[2 + BUF_THREAD_ID_SIZE] = '\0';
-	put_packet(out_buffer);
-}
-
-/* Send thread info */
-static void thread_info_msg(void)
-{
-	struct task_struct *thread = NULL;
-	int threadid;
-	char *pos;
-	threadref thref;
-
-	/* Start with 'm' */
-	out_buffer[0] = 'm';
-	pos = &out_buffer[1];
-
-	/* For all possible thread IDs - this will overrun if > 44 threads! */
-	/* Start at 1 and include PID_MAX (since GDB won't use pid 0...) */
-	for (threadid = 1; threadid <= PID_MAX; threadid++) {
-
-		read_lock(&tasklist_lock);
-		thread = get_thread(threadid);
-		read_unlock(&tasklist_lock);
-
-		/* If it's a valid thread */
-		if (thread) {
-			int_to_threadref(&thref, threadid);
-			pack_threadid(pos, &thref);
-			pos += BUF_THREAD_ID_SIZE;
-			*pos++ = ',';
-		}
-	}
-	*--pos = 0;		/* Lose final comma */
-	put_packet(out_buffer);
-
-}
-
-/* Return printable info for gdb's 'info threads' command */
-static void thread_extra_info_msg(void)
-{
-	int threadid;
-	struct task_struct *thread = NULL;
-	char buffer[20], *ptr;
-	int i;
-
-	/* Extract thread ID */
-	ptr = &in_buffer[17];
-	hex_to_int(&ptr, &threadid);
-	thread = get_thread(threadid);
-
-	/* If we don't recognise it, say so */
-	if (thread == NULL)
-		strcpy(buffer, "(unknown)");
-	else
-		strcpy(buffer, thread->comm);
-
-	/* Construct packet */
-	for (i = 0, ptr = out_buffer; buffer[i]; i++)
-		ptr = pack_hex_byte(ptr, buffer[i]);
-
-	if (thread->thread.pc == (unsigned long)ret_from_fork) {
-		strcpy(buffer, "<new fork>");
-		for (i = 0; buffer[i]; i++)
-			ptr = pack_hex_byte(ptr, buffer[i]);
-	}
-
-	*ptr = '\0';
-	put_packet(out_buffer);
-}
-
-/* Handle all qFooBarBaz messages - have to use an if statement as
-   opposed to a switch because q messages can have > 1 char id. */
-static void query_msg(void)
-{
-	const char *q_start = &in_buffer[1];
-
-	/* qC = return current thread ID */
-	if (strncmp(q_start, "C", 1) == 0)
-		thread_id_msg();
-
-	/* qfThreadInfo = query all threads (first) */
-	else if (strncmp(q_start, "fThreadInfo", 11) == 0)
-		thread_info_msg();
-
-	/* qsThreadInfo = query all threads (subsequent). We know we have sent
-	   them all after the qfThreadInfo message, so there are no to send */
-	else if (strncmp(q_start, "sThreadInfo", 11) == 0)
-		put_packet("l");	/* el = last */
-
-	/* qThreadExtraInfo = supply printable information per thread */
-	else if (strncmp(q_start, "ThreadExtraInfo", 15) == 0)
-		thread_extra_info_msg();
-
-	/* Unsupported - empty message as per spec */
-	else
-		send_empty_msg();
-}
-#endif /* CONFIG_KGDB_THREAD */
-
+#ifdef CONFIG_SH_KGDB_CONSOLE
 /*
  * Bring up the ports..
  */
@@ -1185,6 +824,9 @@
 
 	return 0;
 }
+#else
+#define kgdb_serial_setup()	0
+#endif
 
 /* The command loop, read and act on requests */
 static void kgdb_command_loop(const int excep_code, const int trapa_value)
@@ -1193,7 +835,7 @@
 
 	if (excep_code == NMI_VEC) {
 #ifndef CONFIG_KGDB_NMI
-		KGDB_PRINTK("Ignoring unexpected NMI?\n");
+		printk(KERN_NOTICE "KGDB: Ignoring unexpected NMI?\n");
 		return;
 #else /* CONFIG_KGDB_NMI */
 		if (!kgdb_enabled) {
@@ -1207,19 +849,10 @@
 	if (!kgdb_enabled)
 		return;
 
-#ifdef CONFIG_KGDB_THREAD
-	/* Until GDB specifies a thread */
-	current_thread = NULL;
-	trapped_thread = current;
-#endif
-
 	/* Enter GDB mode (e.g. after detach) */
 	if (!kgdb_in_gdb_mode) {
 		/* Do serial setup, notify user, issue preemptive ack */
-		kgdb_serial_setup();
-		KGDB_PRINTK("Waiting for GDB (on %s%d at %d baud)\n",
-			    (kgdb_porttype ? kgdb_porttype->name : ""),
-			    kgdb_portnum, kgdb_baud);
+		printk(KERN_NOTICE "KGDB: Waiting for GDB\n");
 		kgdb_in_gdb_mode = 1;
 		put_debug_char('+');
 	}
@@ -1233,21 +866,18 @@
 	   will later be replaced by its original one.  Do NOT do this for
 	   trap 0xff, since that indicates a compiled-in breakpoint which
 	   will not be replaced (and we would retake the trap forever) */
-	if ((excep_code == TRAP_VEC) && (trapa_value != (0xff << 2))) {
+	if ((excep_code == TRAP_VEC) && (trapa_value != (0x3c << 2)))
 		trap_registers.pc -= 2;
-	}
 
 	/* Undo any stepping we may have done */
 	undo_single_step();
 
 	while (1) {
-
 		out_buffer[0] = 0;
 		get_packet(in_buffer, BUFMAX);
 
 		/* Examine first char of buffer to see what we need to do */
 		switch (in_buffer[0]) {
-
 		case '?':	/* Send which signal we've received */
 			send_signal_msg(sigval);
 			break;
@@ -1291,21 +921,6 @@
 			step_msg();
 			return;
 
-#ifdef CONFIG_KGDB_THREAD
-
-		case 'H':	/* Task related */
-			set_thread_msg();
-			break;
-
-		case 'T':	/* Query thread status */
-			thread_status_msg();
-			break;
-
-		case 'q':	/* Handle query - currently thread-related */
-			query_msg();
-			break;
-#endif
-
 		case 'k':	/* 'Kill the program' with a kernel ? */
 			break;
 
@@ -1323,11 +938,8 @@
 }
 
 /* There has been an exception, most likely a breakpoint. */
-asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
-				      unsigned long r6, unsigned long r7,
-				      struct pt_regs __regs)
+static void handle_exception(struct pt_regs *regs)
 {
-	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	int excep_code, vbr_val;
 	int count;
 	int trapa_value = ctrl_inl(TRA);
@@ -1355,7 +967,7 @@
 	kgdb_trapa_val = trapa_value;
 
 	/* Act on the exception */
-	kgdb_command_loop(excep_code >> 5, trapa_value);
+	kgdb_command_loop(excep_code, trapa_value);
 
 	kgdb_current = NULL;
 
@@ -1373,14 +985,12 @@
 	asm("ldc %0, vbr": :"r"(vbr_val));
 }
 
-/* Trigger a breakpoint by function */
-void breakpoint(void)
+asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5,
+				      unsigned long r6, unsigned long r7,
+				      struct pt_regs __regs)
 {
-	if (!kgdb_enabled) {
-		kgdb_enabled = 1;
-		kgdb_init();
-	}
-	BREAKPOINT();
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
+	handle_exception(regs);
 }
 
 /* Initialise the KGDB data structures and serial configuration */
@@ -1395,24 +1005,16 @@
 	kgdb_in_gdb_mode = 0;
 
 	if (kgdb_serial_setup() != 0) {
-		KGDB_PRINTK("serial setup error\n");
+		printk(KERN_NOTICE "KGDB: serial setup error\n");
 		return -1;
 	}
 
 	/* Init ptr to exception handler */
-	kgdb_debug_hook = kgdb_handle_exception;
+	kgdb_debug_hook = handle_exception;
 	kgdb_bus_err_hook = kgdb_handle_bus_error;
 
 	/* Enter kgdb now if requested, or just report init done */
-	if (kgdb_halt) {
-		kgdb_in_gdb_mode = 1;
-		put_debug_char('+');
-		breakpoint();
-	}
-	else
-	{
-		KGDB_PRINTK("stub is initialized.\n");
-	}
+	printk(KERN_NOTICE "KGDB: stub is initialized.\n");
 
 	return 0;
 }
@@ -1437,7 +1039,7 @@
 
 		/* Calculate how many this time */
 		wcount = (count > MAXOUT) ? MAXOUT : count;
-		
+
 		/* Pack in hex chars */
 		for (i = 0; i < wcount; i++)
 			bufptr = pack_hex_byte(bufptr, s[i]);
@@ -1467,3 +1069,25 @@
 	kgdb_msg_write(s, count);
 }
 #endif
+
+#ifdef CONFIG_KGDB_SYSRQ
+static void sysrq_handle_gdb(int key, struct tty_struct *tty)
+{
+	printk("Entering GDB stub\n");
+	breakpoint();
+}
+
+static struct sysrq_key_op sysrq_gdb_op = {
+        .handler        = sysrq_handle_gdb,
+        .help_msg       = "Gdb",
+        .action_msg     = "GDB",
+};
+
+static int gdb_register_sysrq(void)
+{
+	printk("Registering GDB sysrq handler\n");
+	register_sysrq_key('g', &sysrq_gdb_op);
+	return 0;
+}
+module_init(gdb_register_sysrq);
+#endif
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 08587cd..790ed69 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -59,13 +59,13 @@
 	        printk("  segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
 		       i,
 		       (unsigned int)image->segment[i].mem,
-		       (unsigned int)image->segment[i].mem + image->segment[i].memsz,
+		       (unsigned int)image->segment[i].mem +
+				     image->segment[i].memsz,
 		       (unsigned int)image->segment[i].memsz);
- 	}
+	}
 	printk("  start     : 0x%08x\n\n", (unsigned int)image->start);
 }
 
-
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
@@ -101,6 +101,27 @@
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-       	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
 }
 
+/* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel.  By reserving this memory we guarantee
+ * that linux never sets it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+static int __init parse_crashkernel(char *arg)
+{
+	unsigned long size, base;
+	size = memparse(arg, &arg);
+	if (*arg == '@') {
+		base = memparse(arg+1, &arg);
+		/* FIXME: Do I want a sanity check
+		 * to validate the memory range?
+		 */
+		crashk_res.start = base;
+		crashk_res.end   = base + size - 1;
+	}
+	return 0;
+}
+early_param("crashkernel", parse_crashkernel);
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index e760736..329b3f3 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -7,7 +7,7 @@
  *
  *  SuperH version:  Copyright (C) 1999, 2000  Niibe Yutaka & Kaz Kojima
  *		     Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
- *		     Copyright (C) 2002 - 2006  Paul Mundt
+ *		     Copyright (C) 2002 - 2007  Paul Mundt
  */
 #include <linux/module.h>
 #include <linux/mm.h>
@@ -15,6 +15,7 @@
 #include <linux/pm.h>
 #include <linux/kallsyms.h>
 #include <linux/kexec.h>
+#include <asm/kdebug.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
 #include <asm/ubc.h>
@@ -299,7 +300,8 @@
 	ctrl_outl(0, UBC_BAMRA);
 
 	if (current_cpu_data.type == CPU_SH7729 ||
-	    current_cpu_data.type == CPU_SH7710) {
+	    current_cpu_data.type == CPU_SH7710 ||
+	    current_cpu_data.type == CPU_SH7712) {
 		ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
 		ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
 	} else {
@@ -495,6 +497,10 @@
 	/* Rewind */
 	regs->pc -= 2;
 
+	if (notify_die(DIE_TRAP, regs, regs->tra & 0xff,
+		       SIGTRAP) == NOTIFY_STOP)
+		return;
+
 	force_sig(SIGTRAP, current);
 }
 
@@ -510,6 +516,10 @@
 	/* Rewind */
 	regs->pc -= 2;
 
+	if (notify_die(DIE_TRAP, regs, TRAPA_BUG_OPCODE & 0xff,
+		       SIGTRAP) == NOTIFY_STOP)
+		return;
+
 #ifdef CONFIG_BUG
 	if (__kernel_text_address(instruction_pointer(regs))) {
 		u16 insn = *(u16 *)instruction_pointer(regs);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 98802ab..477d2a8 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -4,7 +4,7 @@
  * This file handles the architecture-dependent parts of initialization
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2002 - 2006 Paul Mundt
+ *  Copyright (C) 2002 - 2007 Paul Mundt
  */
 #include <linux/screen_info.h>
 #include <linux/ioport.h>
@@ -15,21 +15,22 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/utsname.h>
+#include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/pfn.h>
 #include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/kexec.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/sections.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/clock.h>
+#include <asm/mmu_context.h>
 
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_parse_options(char *options);
-#endif
 extern void * __rd_start, * __rd_end;
+
 /*
  * Machine setup..
  */
@@ -205,13 +206,117 @@
 	return 0;
 }
 
-void __init setup_arch(char **cmdline_p)
+/*
+ * Register fully available low RAM pages with the bootmem allocator.
+ */
+static void __init register_bootmem_low_pages(void)
+{
+	unsigned long curr_pfn, last_pfn, pages;
+
+	/*
+	 * We are rounding up the start address of usable memory:
+	 */
+	curr_pfn = PFN_UP(__MEMORY_START);
+
+	/*
+	 * ... and at the end of the usable range downwards:
+	 */
+	last_pfn = PFN_DOWN(__pa(memory_end));
+
+	if (last_pfn > max_low_pfn)
+		last_pfn = max_low_pfn;
+
+	pages = last_pfn - curr_pfn;
+	free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages));
+}
+
+void __init setup_bootmem_allocator(unsigned long start_pfn)
 {
 	unsigned long bootmap_size;
-	unsigned long start_pfn, max_pfn, max_low_pfn;
+
+	/*
+	 * Find a proper area for the bootmem bitmap. After this
+	 * bootstrap step all allocations (until the page allocator
+	 * is intact) must be done via bootmem_alloc().
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
+					 min_low_pfn, max_low_pfn);
+
+	register_bootmem_low_pages();
+
+	node_set_online(0);
+
+	/*
+	 * Reserve the kernel text and
+	 * Reserve the bootmem bitmap. We do this in two steps (first step
+	 * was init_bootmem()), because this catches the (definitely buggy)
+	 * case of us accidentally initializing the bootmem allocator with
+	 * an invalid RAM area.
+	 */
+	reserve_bootmem(__MEMORY_START+PAGE_SIZE,
+		(PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
+
+	/*
+	 * reserve physical page 0 - it's a special BIOS page on many boxes,
+	 * enabling clean reboots, SMP operation, laptop functions.
+	 */
+	reserve_bootmem(__MEMORY_START, PAGE_SIZE);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
+	if (&__rd_start != &__rd_end) {
+		LOADER_TYPE = 1;
+		INITRD_START = PHYSADDR((unsigned long)&__rd_start) -
+					__MEMORY_START;
+		INITRD_SIZE = (unsigned long)&__rd_end -
+			      (unsigned long)&__rd_start;
+	}
+
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
+			reserve_bootmem(INITRD_START + __MEMORY_START,
+					INITRD_SIZE);
+			initrd_start = INITRD_START + PAGE_OFFSET +
+					__MEMORY_START;
+			initrd_end = initrd_start + INITRD_SIZE;
+		} else {
+			printk("initrd extends beyond end of memory "
+			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+				    INITRD_START + INITRD_SIZE,
+				    max_low_pfn << PAGE_SHIFT);
+			initrd_start = 0;
+		}
+	}
+#endif
+#ifdef CONFIG_KEXEC
+	if (crashk_res.start != crashk_res.end)
+		reserve_bootmem(crashk_res.start,
+			crashk_res.end - crashk_res.start + 1);
+#endif
+}
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+static void __init setup_memory(void)
+{
+	unsigned long start_pfn;
+
+	/*
+	 * Partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	start_pfn = PFN_UP(__pa(_end));
+	setup_bootmem_allocator(start_pfn);
+}
+#else
+extern void __init setup_memory(void);
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+	enable_mmu();
 
 #ifdef CONFIG_CMDLINE_BOOL
-        strcpy(COMMAND_LINE, CONFIG_CMDLINE);
+	strcpy(COMMAND_LINE, CONFIG_CMDLINE);
 #endif
 
 	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
@@ -229,14 +334,15 @@
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = (unsigned long) _end;
 
-	code_resource.start = (unsigned long)virt_to_phys(_text);
-	code_resource.end = (unsigned long)virt_to_phys(_etext)-1;
-	data_resource.start = (unsigned long)virt_to_phys(_etext);
-	data_resource.end = (unsigned long)virt_to_phys(_edata)-1;
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+
+	parse_early_param();
 
 	sh_mv_setup(cmdline_p);
 
-
 	/*
 	 * Find the highest page frame number we have available
 	 */
@@ -246,87 +352,12 @@
 	 * Determine low and high memory ranges:
 	 */
 	max_low_pfn = max_pfn;
+	min_low_pfn = __MEMORY_START >> PAGE_SHIFT;
 
-	/*
-	 * Partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	start_pfn = PFN_UP(__pa(_end));
-
-	/*
-	 * Find a proper area for the bootmem bitmap. After this
-	 * bootstrap step all allocations (until the page allocator
-	 * is intact) must be done via bootmem_alloc().
-	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
-					 __MEMORY_START>>PAGE_SHIFT,
-					 max_low_pfn);
-	/*
-	 * Register fully available low RAM pages with the bootmem allocator.
-	 */
-	{
-		unsigned long curr_pfn, last_pfn, pages;
-
-		/*
-		 * We are rounding up the start address of usable memory:
-		 */
-		curr_pfn = PFN_UP(__MEMORY_START);
-		/*
-		 * ... and at the end of the usable range downwards:
-		 */
-		last_pfn = PFN_DOWN(__pa(memory_end));
-
-		if (last_pfn > max_low_pfn)
-			last_pfn = max_low_pfn;
-
-		pages = last_pfn - curr_pfn;
-		free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
-				  PFN_PHYS(pages));
-	}
-
-
-	/*
-	 * Reserve the kernel text and
-	 * Reserve the bootmem bitmap. We do this in two steps (first step
-	 * was init_bootmem()), because this catches the (definitely buggy)
-	 * case of us accidentally initializing the bootmem allocator with
-	 * an invalid RAM area.
-	 */
-	reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE,
-		(PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);
-
-	/*
-	 * reserve physical page 0 - it's a special BIOS page on many boxes,
-	 * enabling clean reboots, SMP operation, laptop functions.
-	 */
-	reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
-	if (&__rd_start != &__rd_end) {
-		LOADER_TYPE = 1;
-		INITRD_START = PHYSADDR((unsigned long)&__rd_start) -
-					__MEMORY_START;
-		INITRD_SIZE = (unsigned long)&__rd_end -
-			      (unsigned long)&__rd_start;
-	}
-
-	if (LOADER_TYPE && INITRD_START) {
-		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
-			reserve_bootmem_node(NODE_DATA(0), INITRD_START +
-						__MEMORY_START, INITRD_SIZE);
-			initrd_start = INITRD_START + PAGE_OFFSET +
-					__MEMORY_START;
-			initrd_end = initrd_start + INITRD_SIZE;
-		} else {
-			printk("initrd extends beyond end of memory "
-			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-				    INITRD_START + INITRD_SIZE,
-				    max_low_pfn << PAGE_SHIFT);
-			initrd_start = 0;
-		}
-	}
-#endif
+	nodes_clear(node_online_map);
+	setup_memory();
+	paging_init();
+	sparse_init();
 
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
@@ -335,8 +366,6 @@
 	/* Perform the machine specific initialisation */
 	if (likely(sh_mv.mv_setup))
 		sh_mv.mv_setup(cmdline_p);
-
-	paging_init();
 }
 
 struct sh_machine_vector* __init get_mv_byname(const char* name)
@@ -380,6 +409,7 @@
 	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
 	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
 	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
+	[CPU_SH7712]	= "SH7712",
 	[CPU_SH7729]	= "SH7729",	[CPU_SH7750]	= "SH7750",
 	[CPU_SH7750S]	= "SH7750S",	[CPU_SH7750R]	= "SH7750R",
 	[CPU_SH7751]	= "SH7751",	[CPU_SH7751R]	= "SH7751R",
@@ -477,7 +507,7 @@
 		     c->loops_per_jiffy/(500000/HZ),
 		     (c->loops_per_jiffy/(5000/HZ)) % 100);
 
-	return show_clocks(m);
+	return 0;
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
@@ -499,92 +529,3 @@
 	.show	= show_cpuinfo,
 };
 #endif /* CONFIG_PROC_FS */
-
-#ifdef CONFIG_SH_KGDB
-/*
- * Parse command-line kgdb options.  By default KGDB is enabled,
- * entered on error (or other action) using default serial info.
- * The command-line option can include a serial port specification
- * and an action to override default or configured behavior.
- */
-struct kgdb_sermap kgdb_sci_sermap =
-{ "ttySC", 5, kgdb_sci_setup, NULL };
-
-struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap;
-struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap;
-
-void kgdb_register_sermap(struct kgdb_sermap *map)
-{
-	struct kgdb_sermap *last;
-
-	for (last = kgdb_serlist; last->next; last = last->next)
-		;
-	last->next = map;
-	if (!map->namelen) {
-		map->namelen = strlen(map->name);
-	}
-}
-
-static int __init kgdb_parse_options(char *options)
-{
-	char c;
-	int baud;
-
-	/* Check for port spec (or use default) */
-
-	/* Determine port type and instance */
-	if (!memcmp(options, "tty", 3)) {
-		struct kgdb_sermap *map = kgdb_serlist;
-
-		while (map && memcmp(options, map->name, map->namelen))
-			map = map->next;
-
-		if (!map) {
-			KGDB_PRINTK("unknown port spec in %s\n", options);
-			return -1;
-		}
-
-		kgdb_porttype = map;
-		kgdb_serial_setup = map->setup_fn;
-		kgdb_portnum = options[map->namelen] - '0';
-		options += map->namelen + 1;
-
-		options = (*options == ',') ? options+1 : options;
-
-		/* Read optional parameters (baud/parity/bits) */
-		baud = simple_strtoul(options, &options, 10);
-		if (baud != 0) {
-			kgdb_baud = baud;
-
-			c = toupper(*options);
-			if (c == 'E' || c == 'O' || c == 'N') {
-				kgdb_parity = c;
-				options++;
-			}
-
-			c = *options;
-			if (c == '7' || c == '8') {
-				kgdb_bits = c;
-				options++;
-			}
-			options = (*options == ',') ? options+1 : options;
-		}
-	}
-
-	/* Check for action specification */
-	if (!memcmp(options, "halt", 4)) {
-		kgdb_halt = 1;
-		options += 4;
-	} else if (!memcmp(options, "disabled", 8)) {
-		kgdb_enabled = 0;
-		options += 8;
-	}
-
-	if (*options) {
-                KGDB_PRINTK("ignored unknown options: %s\n", options);
-		return 0;
-	}
-	return 1;
-}
-__setup("kgdb=", kgdb_parse_options);
-#endif /* CONFIG_SH_KGDB */
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index 6e0d10f..17f0b50 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -65,7 +65,6 @@
 
 /* These symbols are generated by the compiler itself */
 DECLARE_EXPORT(__udivsi3);
-DECLARE_EXPORT(__udivdi3);
 DECLARE_EXPORT(__sdivsi3);
 DECLARE_EXPORT(__ashrdi3);
 DECLARE_EXPORT(__ashldi3);
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index e060e71..ad1ede5 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -148,7 +148,9 @@
 
 	/* Start TMU0 */
 	tmu_timer_stop();
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
+    !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
+    !defined(CONFIG_CPU_SUBTYPE_SH7785)
 	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
 #endif
 
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index e9f168f..7b40f0f 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -5,7 +5,7 @@
  *  SuperH version: Copyright (C) 1999 Niibe Yutaka
  *                  Copyright (C) 2000 Philipp Rumpf
  *                  Copyright (C) 2000 David Howells
- *                  Copyright (C) 2002 - 2006 Paul Mundt
+ *                  Copyright (C) 2002 - 2007 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,10 +18,12 @@
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 #include <linux/debug_locks.h>
 #include <linux/limits.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/kdebug.h>
 
 #ifdef CONFIG_SH_KGDB
 #include <asm/kgdb.h>
@@ -74,7 +76,21 @@
 	}
 }
 
-DEFINE_SPINLOCK(die_lock);
+ATOMIC_NOTIFIER_HEAD(shdie_chain);
+
+int register_die_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&shdie_chain, nb);
+}
+EXPORT_SYMBOL(register_die_notifier);
+
+int unregister_die_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(&shdie_chain, nb);
+}
+EXPORT_SYMBOL(unregister_die_notifier);
+
+static DEFINE_SPINLOCK(die_lock);
 
 void die(const char * str, struct pt_regs * regs, long err)
 {
@@ -130,40 +146,6 @@
 	return -EFAULT;
 }
 
-#ifdef CONFIG_BUG
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-static inline void do_bug_verbose(struct pt_regs *regs)
-{
-	struct bug_frame f;
-	long len;
-
-	if (__copy_from_user(&f, (const void __user *)regs->pc,
-			     sizeof(struct bug_frame)))
-		return;
-
-	len = __strnlen_user(f.file, PATH_MAX) - 1;
-	if (unlikely(len < 0 || len >= PATH_MAX))
-		f.file = "<bad filename>";
-	len = __strnlen_user(f.func, PATH_MAX) - 1;
-	if (unlikely(len < 0 || len >= PATH_MAX))
-		f.func = "<bad function>";
-
-	printk(KERN_ALERT "kernel BUG in %s() at %s:%d!\n",
-	       f.func, f.file, f.line);
-}
-#else
-static inline void do_bug_verbose(struct pt_regs *regs)
-{
-}
-#endif /* CONFIG_DEBUG_BUGVERBOSE */
-
-void handle_BUG(struct pt_regs *regs)
-{
-	do_bug_verbose(regs);
-	die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
-}
-#endif /* CONFIG_BUG */
-
 /*
  * handle an instruction that does an unaligned memory access by emulating the
  * desired behaviour
@@ -888,6 +870,25 @@
 	per_cpu_trap_init();
 }
 
+#ifdef CONFIG_BUG
+void handle_BUG(struct pt_regs *regs)
+{
+	enum bug_trap_type tt;
+	tt = report_bug(regs->pc);
+	if (tt == BUG_TRAP_TYPE_WARN) {
+		regs->pc += 2;
+		return;
+	}
+
+	die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
+}
+
+int is_valid_bugaddr(unsigned long addr)
+{
+	return addr >= PAGE_OFFSET;
+}
+#endif
+
 void show_trace(struct task_struct *tsk, unsigned long *sp,
 		struct pt_regs *regs)
 {
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 2f606d0..d83143c 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -34,9 +34,11 @@
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
 
+  _etext = .;			/* End of text section */
+
   RODATA
 
-  _etext = .;			/* End of text section */
+  BUG_TABLE
 
   .data : {			/* Data */
 	*(.data)
@@ -53,6 +55,10 @@
 
   . = ALIGN(PAGE_SIZE);
   .data.page_aligned : { *(.data.page_aligned) }
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(PAGE_SIZE);
+  __nosave_end = .;
 
   . = ALIGN(PAGE_SIZE);
   __per_cpu_start = .;
@@ -110,43 +116,10 @@
    * it's a module.
    */
   /DISCARD/ : {
-	*(.exit.text)
-	*(.exit.data)
 	*(.exitcall.exit)
 	}
 
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging section are relative to the beginning
-     of the section so we begin .debug at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
+  STABS_DEBUG
+
+  DWARF_DEBUG
 }
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index 0b9cca5..e23dd1a 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -3,11 +3,9 @@
 #
 
 lib-y  = delay.o memset.o memmove.o memchr.o \
-	 checksum.o strlen.o div64.o udivdi3.o \
-	 div64-generic.o
+	 checksum.o strlen.o div64.o div64-generic.o
 
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
 lib-y	+= $(memcpy-y)
-
diff --git a/arch/sh/lib/udivdi3.c b/arch/sh/lib/udivdi3.c
deleted file mode 100644
index 68f038b..0000000
--- a/arch/sh/lib/udivdi3.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Simple __udivdi3 function which doesn't use FPU.
- */
-
-#include <linux/types.h>
-
-extern u64 __xdiv64_32(u64 n, u32 d);
-extern void panic(const char * fmt, ...);
-
-u64 __udivdi3(u64 n, u64 d)
-{
-	if (d & ~0xffffffff)
-		panic("Need true 64-bit/64-bit division");
-	return __xdiv64_32(n, (u32)d);
-}
-
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 6b0d28a..12f3d39 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -67,6 +67,7 @@
 config CPU_SUBTYPE_SH7705
 	bool "Support SH7705 processor"
 	select CPU_SH3
+	select CPU_HAS_IPR_IRQ
 	select CPU_HAS_PINT_IRQ
 
 config CPU_SUBTYPE_SH7706
@@ -101,9 +102,17 @@
 config CPU_SUBTYPE_SH7710
 	bool "Support SH7710 processor"
 	select CPU_SH3
+	select CPU_HAS_IPR_IRQ
 	help
 	  Select SH7710 if you have a SH3-DSP SH7710 CPU.
 
+config CPU_SUBTYPE_SH7712
+	bool "Support SH7712 processor"
+	select CPU_SH3
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SH7712 if you have a SH3-DSP SH7712 CPU.
+
 comment "SH-4 Processor Support"
 
 config CPU_SUBTYPE_SH7750
@@ -283,6 +292,17 @@
 	  For systems with an MMU that can afford to give up a page,
 	  (the default value) say Y.
 
+config NODES_SHIFT
+	int
+	default "1"
+	depends on NEED_MULTIPLE_NODES
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config ARCH_POPULATES_NODE_MAP
+	def_bool y
+
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB
diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c
index fa5d7f0..0ecc117 100644
--- a/arch/sh/mm/fault.c
+++ b/arch/sh/mm/fault.c
@@ -2,7 +2,7 @@
  * Page fault handler for SH with an MMU.
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2003  Paul Mundt
+ *  Copyright (C) 2003 - 2007  Paul Mundt
  *
  *  Based on linux/arch/i386/mm/fault.c:
  *   Copyright (C) 1995  Linus Torvalds
@@ -15,12 +15,42 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
+#include <asm/kdebug.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 #include <asm/kgdb.h>
 
-extern void die(const char *,struct pt_regs *,long);
+#ifdef CONFIG_KPROBES
+ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
+
+/* Hook to register for page fault notifications */
+int register_page_fault_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&notify_page_fault_chain, nb);
+}
+
+int unregister_page_fault_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
+}
+
+static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
+				    int trap, int sig)
+{
+	struct die_args args = {
+		.regs = regs,
+		.trapnr = trap,
+	};
+	return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
+}
+#else
+static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
+				    int trap, int sig)
+{
+	return NOTIFY_DONE;
+}
+#endif
 
 /*
  * This routine handles page faults.  It determines the address,
@@ -39,6 +69,11 @@
 	siginfo_t info;
 
 	trace_hardirqs_on();
+
+	if (notify_page_fault(DIE_PAGE_FAULT, regs,
+			      writeaccess, SIGSEGV) == NOTIFY_STOP)
+		return;
+
 	local_irq_enable();
 
 #ifdef CONFIG_SH_KGDB
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ae957a9..4d03098 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -1,37 +1,20 @@
-/* $Id: init.c,v 1.19 2004/02/21 04:42:16 kkojima Exp $
- *
- *  linux/arch/sh/mm/init.c
+/*
+ * linux/arch/sh/mm/init.c
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2002, 2004  Paul Mundt
+ *  Copyright (C) 2002 - 2007  Paul Mundt
  *
  *  Based on linux/arch/i386/mm/init.c:
  *   Copyright (C) 1995  Linus Torvalds
  */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
-#include <linux/smp.h>
 #include <linux/init.h>
-#include <linux/highmem.h>
 #include <linux/bootmem.h>
-#include <linux/pagemap.h>
 #include <linux/proc_fs.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
+#include <linux/percpu.h>
+#include <linux/io.h>
 #include <asm/mmu_context.h>
-#include <asm/io.h>
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
 #include <asm/cache.h>
@@ -39,37 +22,51 @@
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-#ifdef CONFIG_MMU
-/* It'd be good if these lines were in the standard header file. */
-#define START_PFN	(NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-#define MAX_LOW_PFN	(NODE_DATA(0)->bdata->node_low_pfn)
-#endif
-
 void (*copy_page)(void *from, void *to);
 void (*clear_page)(void *to);
 
 void show_mem(void)
 {
-	int i, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
+	int total = 0, reserved = 0, free = 0;
+	int shared = 0, cached = 0, slab = 0;
+	pg_data_t *pgdat;
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (page_count(mem_map+i))
-			shared += page_count(mem_map+i) - 1;
+
+	for_each_online_pgdat(pgdat) {
+		struct page *page, *end;
+		unsigned long flags;
+
+		pgdat_resize_lock(pgdat, &flags);
+		page = pgdat->node_mem_map;
+		end = page + pgdat->node_spanned_pages;
+
+		do {
+			total++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (PageSlab(page))
+				slab++;
+			else if (!page_count(page))
+				free++;
+			else
+				shared += page_count(page) - 1;
+			page++;
+		} while (page < end);
+
+		pgdat_resize_unlock(pgdat, &flags);
 	}
-	printk("%d pages of RAM\n",total);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
+
+	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+	printk("%d pages of RAM\n", total);
+	printk("%d free pages\n", free);
+	printk("%d reserved pages\n", reserved);
+	printk("%d slab pages\n", slab);
+	printk("%d pages shared\n", shared);
+	printk("%d pages swap cached\n", cached);
 }
 
 #ifdef CONFIG_MMU
@@ -147,52 +144,38 @@
  */
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+	int nid;
 
-	/*
-	 * Setup some defaults for the zone sizes.. these should be safe
-	 * regardless of distcontiguous memory or MMU settings.
-	 */
-	zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT;
-#ifdef CONFIG_HIGHMEM
-	zones_size[ZONE_HIGHMEM] = 0 >> PAGE_SHIFT;
-#endif
-
-#ifdef CONFIG_MMU
-	/*
-	 * If we have an MMU, and want to be using it .. we need to adjust
-	 * the zone sizes accordingly, in addition to turning it on.
-	 */
-	{
-		/* We don't need to map the kernel through the TLB, as
-		 * it is permanatly mapped using P1. So clear the
-		 * entire pgd. */
-		memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-
-		/* Turn on the MMU */
-		enable_mmu();
-		zones_size[ZONE_NORMAL] = MAX_LOW_PFN - START_PFN;
-	}
+	/* We don't need to map the kernel through the TLB, as
+	 * it is permanatly mapped using P1. So clear the
+	 * entire pgd. */
+	memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
 
 	/* Set an initial value for the MMU.TTB so we don't have to
 	 * check for a null value. */
 	set_TTB(swapper_pg_dir);
 
-#elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
-	/*
-	 * If we don't have CONFIG_MMU set and the processor in question
-	 * still has an MMU, care needs to be taken to make sure it doesn't
-	 * stay on.. Since the boot loader could have potentially already
-	 * turned it on, and we clearly don't want it, we simply turn it off.
-	 *
-	 * We don't need to do anything special for the zone sizes, since the
-	 * default values that were already configured up above should be
-	 * satisfactory.
-	 */
-	disable_mmu();
-#endif
-	NODE_DATA(0)->node_mem_map = NULL;
-	free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
+	for_each_online_node(nid) {
+		pg_data_t *pgdat = NODE_DATA(nid);
+		unsigned long max_zone_pfns[MAX_NR_ZONES];
+		unsigned long low, start_pfn;
+
+		memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+
+		start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+		low = pgdat->bdata->node_low_pfn;
+
+		max_zone_pfns[ZONE_NORMAL] = low;
+		add_active_range(nid, start_pfn, low);
+
+		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
+		       nid, start_pfn, low);
+
+		free_area_init_nodes(max_zone_pfns);
+
+		printk("Node %u: mem_map starts at %p\n",
+		       pgdat->node_id, pgdat->node_mem_map);
+	}
 }
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
@@ -200,18 +183,33 @@
 void __init mem_init(void)
 {
 	int codesize, reservedpages, datasize, initsize;
-	int tmp;
-	extern unsigned long memory_start;
+	int nid;
 
-#ifdef CONFIG_MMU
-	high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
-#else
-	extern unsigned long memory_end;
+	reservedpages = 0;
 
-	high_memory = (void *)(memory_end & PAGE_MASK);
-#endif
+	for_each_online_node(nid) {
+		pg_data_t *pgdat = NODE_DATA(nid);
+		unsigned long node_pages = 0;
+		void *node_high_memory;
+		int i;
 
-	max_mapnr = num_physpages = MAP_NR(high_memory) - MAP_NR(memory_start);
+		num_physpages += pgdat->node_present_pages;
+
+		if (pgdat->node_spanned_pages)
+			node_pages = free_all_bootmem_node(pgdat);
+
+		totalram_pages += node_pages;
+
+		for (i = 0; i < node_pages; i++)
+			if (PageReserved(pgdat->node_mem_map + i))
+				reservedpages++;
+
+		node_high_memory = (void *)((pgdat->node_start_pfn +
+					     pgdat->node_spanned_pages) <<
+						PAGE_SHIFT);
+		if (node_high_memory > high_memory)
+			high_memory = node_high_memory;
+	}
 
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);
@@ -229,16 +227,6 @@
 	clear_page = clear_page_nommu;
 #endif
 
-	/* this will put all low memory onto the freelists */
-	totalram_pages += free_all_bootmem_node(NODE_DATA(0));
-	reservedpages = 0;
-	for (tmp = 0; tmp < num_physpages; tmp++)
-		/*
-		 * Only count reserved RAM pages
-		 */
-		if (PageReserved(mem_map+tmp))
-			reservedpages++;
-
 	codesize =  (unsigned long) &_etext - (unsigned long) &_text;
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
@@ -250,7 +238,7 @@
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 	       "%dk reserved, %dk data, %dk init)\n",
 		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		max_mapnr << (PAGE_SHIFT-10),
+		totalram_pages << (PAGE_SHIFT-10),
 		codesize >> 10,
 		reservedpages << (PAGE_SHIFT-10),
 		datasize >> 10,
@@ -289,4 +277,3 @@
 	printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
-
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 4fe0f94..554f801 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -9,6 +9,7 @@
 7751SE			SH_7751_SOLUTION_ENGINE		
 7300SE			SH_7300_SOLUTION_ENGINE
 7343SE			SH_7343_SOLUTION_ENGINE
+7780SE			SH_7780_SOLUTION_ENGINE
 73180SE			SH_73180_SOLUTION_ENGINE
 7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX
@@ -26,6 +27,7 @@
 LANDISK			SH_LANDISK
 R7780RP			SH_R7780RP
 R7780MP			SH_R7780MP
+R7785RP			SH_R7785RP
 TITAN			SH_TITAN
 SHMIN			SH_SHMIN
 7710VOIPGW		SH_7710VOIPGW
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index 2490874..61c1502 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -21,7 +21,7 @@
 static void do_softint(void *data);
 
 static struct input_dev *hp680_ts_dev;
-static DECLARE_WORK(work, do_softint, 0);
+static DECLARE_WORK(work, do_softint);
 
 static void do_softint(void *data)
 {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 46c40bb..1f89496 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -46,6 +46,7 @@
 #endif
 
 #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <linux/ctype.h>
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
 #include <asm/kgdb.h>
@@ -61,7 +62,7 @@
 	unsigned int		type;
 
 	/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
-	unsigned int		irqs[SCIx_NR_IRQS]; 
+	unsigned int		irqs[SCIx_NR_IRQS];
 
 	/* Port pin configuration */
 	void			(*init_pins)(struct uart_port *port,
@@ -76,6 +77,11 @@
 	/* Break timer */
 	struct timer_list	break_timer;
 	int			break_flag;
+
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+	/* Port clock */
+	struct clk		*clk;
+#endif
 };
 
 #ifdef CONFIG_SH_KGDB
@@ -163,7 +169,7 @@
 	usegdb |= sh_bios_in_gdb_mode();
 #endif
 #ifdef CONFIG_SH_KGDB
-	usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port));
+	usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port));
 #endif
 
 	if (usegdb) {
@@ -204,7 +210,7 @@
         int c;
 
         /* Keep trying to read a character, this could be neater */
-        while ((c = get_char(kgdb_sci_port)) < 0)
+        while ((c = get_char(&kgdb_sci_port->port)) < 0)
 		cpu_relax();
 
         return c;
@@ -212,7 +218,7 @@
 
 static inline void kgdb_sci_putchar(int c)
 {
-        put_char(kgdb_sci_port, c);
+        put_char(&kgdb_sci_port->port, c);
 }
 #endif /* CONFIG_SH_KGDB */
 
@@ -283,12 +289,23 @@
 #endif
 
 #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) 
 /* SH7300 doesn't use RTS/CTS */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 {
 	sci_out(port, SCFCR, 0);
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
+{
+	unsigned int fcr_val = 0;
+
+	set_sh771x_scif_pfc(port);
+	if (cflag & CRTSCTS) {
+		fcr_val |= SCFCR_MCE;
+	}
+	sci_out(port, SCFCR, fcr_val);
+}
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
@@ -350,7 +367,7 @@
 	} else {
 #ifdef CONFIG_CPU_SUBTYPE_SH7343
 		/* Nothing */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
 		ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
 #else
 		ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
@@ -360,7 +377,9 @@
 }
 #endif
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7785)
 static inline int scif_txroom(struct uart_port *port)
 {
 	return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
@@ -735,12 +754,6 @@
 
 	/* Handle BREAKs */
 	sci_handle_breaks(port);
-
-#ifdef CONFIG_SH_KGDB
-	/* Break into the debugger if a break is detected */
-	BREAKPOINT();
-#endif
-
 	sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
 
 	return IRQ_HANDLED;
@@ -947,6 +960,10 @@
 	if (s->enable)
 		s->enable(port);
 
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+	s->clk = clk_get(NULL, "module_clk");
+#endif
+
 	sci_request_irq(s);
 	sci_start_tx(port);
 	sci_start_rx(port, 1);
@@ -964,6 +981,11 @@
 
 	if (s->disable)
 		s->disable(port);
+
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+	clk_put(s->clk);
+	s->clk = NULL;
+#endif
 }
 
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -971,7 +993,6 @@
 {
 	struct sci_port *s = &sci_ports[port->line];
 	unsigned int status, baud, smr_val;
-	unsigned long flags;
 	int t;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
@@ -983,18 +1004,14 @@
 		default:
 		{
 #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
-			struct clk *clk = clk_get(NULL, "module_clk");
-			t = SCBRR_VALUE(baud, clk_get_rate(clk));
-			clk_put(clk);
+			t = SCBRR_VALUE(baud, clk_get_rate(s->clk));
 #else
 			t = SCBRR_VALUE(baud);
 #endif
-		}
 			break;
+		}
 	}
 
-	spin_lock_irqsave(&port->lock, flags);
-
 	do {
 		status = sci_in(port, SCxSR);
 	} while (!(status & SCxSR_TEND(port)));
@@ -1038,8 +1055,6 @@
 
 	if ((termios->c_cflag & CREAD) != 0)
               sci_start_rx(port,0);
-
-	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static const char *sci_type(struct uart_port *port)
@@ -1220,10 +1235,13 @@
 	if (!port->membase || !port->mapbase)
 		return -ENODEV;
 
-	spin_lock_init(&port->lock);
-
 	port->type = serial_console_port->type;
 
+#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+	if (!serial_console_port->clk)
+		serial_console_port->clk = clk_get(NULL, "module_clk");
+#endif
+
 	if (port->flags & UPF_IOREMAP)
 		sci_config_port(port, 0);
 
@@ -1247,7 +1265,7 @@
 	.device		= uart_console_device,
 	.write		= serial_console_write,
 	.setup		= serial_console_setup,
-	.flags		= CON_PRINTBUFFER, 
+	.flags		= CON_PRINTBUFFER,
 	.index		= -1,
 	.data		= &sci_uart_driver,
 };
@@ -1292,11 +1310,23 @@
 	int parity = 'n';
 	int flow = 'n';
 
-	spin_lock_init(&port->lock);
-
 	if (co->index != kgdb_portnum)
 		co->index = kgdb_portnum;
 
+	kgdb_sci_port = &sci_ports[co->index];
+	port = &kgdb_sci_port->port;
+
+	/*
+	 * Also need to check port->type, we don't actually have any
+	 * UPIO_PORT ports, but uart_report_port() handily misreports
+	 * it anyways if we don't have a port available by the time this is
+	 * called.
+	 */
+	if (!port->type)
+		return -ENODEV;
+	if (!port->membase || !port->mapbase)
+		return -ENODEV;
+
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	else
@@ -1311,11 +1341,12 @@
 
 #ifdef CONFIG_SH_KGDB_CONSOLE
 static struct console kgdb_console = {
-        .name		= "ttySC",
-        .write		= kgdb_console_write,
-        .setup		= kgdb_console_setup,
-        .flags		= CON_PRINTBUFFER | CON_ENABLED,
-        .index		= -1,
+	.name		= "ttySC",
+	.device		= uart_console_device,
+	.write		= kgdb_console_write,
+	.setup		= kgdb_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
 	.data		= &sci_uart_driver,
 };
 
@@ -1361,9 +1392,19 @@
 	struct plat_sci_port *p = dev->dev.platform_data;
 	int i;
 
-	for (i = 0; p && p->flags != 0 && i < SCI_NPORTS; p++, i++) {
+	for (i = 0; p && p->flags != 0; p++, i++) {
 		struct sci_port *sciport = &sci_ports[i];
 
+		/* Sanity check */
+		if (unlikely(i == SCI_NPORTS)) {
+			dev_notice(&dev->dev, "Attempting to register port "
+				   "%d when only %d are available.\n",
+				   i+1, SCI_NPORTS);
+			dev_notice(&dev->dev, "Consider bumping "
+				   "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+			break;
+		}
+
 		sciport->port.mapbase	= p->mapbase;
 
 		/*
@@ -1386,6 +1427,12 @@
 		uart_add_one_port(&sci_uart_driver, &sciport->port);
 	}
 
+#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE)
+	kgdb_sci_port	= &sci_ports[kgdb_portnum];
+	kgdb_getchar	= kgdb_sci_getchar;
+	kgdb_putchar	= kgdb_sci_putchar;
+#endif
+
 #ifdef CONFIG_CPU_FREQ
 	cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
 	dev_info(&dev->dev, "sci: CPU frequency notifier registered\n");
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 77f7d63..fb04fb5 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -73,9 +73,13 @@
 # define SCPDR  0xA4050136        /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) 
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
-# define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_NPORTS 2
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define PACR 0xa4050100
+# define PBCR 0xa4050102
+# define SCSCR_INIT(port)          0x3B
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH73180)
 # define SCPDR  0xA4050138        /* 16 bit SCIF */
@@ -140,6 +144,16 @@
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+# define SCSPTR0	0xffea0024	/* 16 bit SCIF */
+# define SCSPTR1	0xffeb0024	/* 16 bit SCIF */
+# define SCSPTR2	0xffec0024	/* 16 bit SCIF */
+# define SCSPTR3	0xffed0024	/* 16 bit SCIF */
+# define SCSPTR4	0xffee0024	/* 16 bit SCIF */
+# define SCSPTR5	0xffef0024	/* 16 bit SCIF */
+# define SCIF_OPER	0x0001		/* Overrun error bit */
+# define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7206)
 # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
 # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
@@ -163,7 +177,10 @@
 #define SCI_CTRL_FLAGS_RIE  0x40 /* all */
 #define SCI_CTRL_FLAGS_TE   0x20 /* all */
 #define SCI_CTRL_FLAGS_RE   0x10 /* all */
-#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
 #else
 #define SCI_CTRL_FLAGS_REIE 0
@@ -333,9 +350,15 @@
   }
 
 #ifdef CONFIG_CPU_SH3
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+		                sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+		                 h8_sci_offset, h8_sci_size) \
+  CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7705) 
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -362,8 +385,8 @@
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7710)
+    defined(CONFIG_CPU_SUBTYPE_SH7705) 
+
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
 SCIF_FNS(SCSCR,  0x08, 16)
@@ -385,7 +408,9 @@
 SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
-#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7785)
 SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCTFDR,		     0x0e, 16, 0x1C, 16)
 SCIF_FNS(SCRFDR,		     0x0e, 16, 0x20, 16)
@@ -471,13 +496,24 @@
 		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
 	return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-	if (port->mapbase == SCSPTR0)
-		return ctrl_inw(SCSPTR0 + 0x10) & 0x01 ? 1 : 0;
-	return 1;
+	  return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
 }
+static inline void set_sh771x_scif_pfc(struct uart_port *port)
+{
+	if (port->mapbase == 0xA4400000){
+		ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR);
+		ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR);
+		return;
+	}
+	if (port->mapbase == 0xA4410000){
+		ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR);
+		return;
+	}
+}
+
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
       defined(CONFIG_CPU_SUBTYPE_SH7751) || \
       defined(CONFIG_CPU_SUBTYPE_SH4_202)
@@ -576,6 +612,23 @@
 		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffea0000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffeb0000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffec0000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffed0000)
+		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffee0000)
+		return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffef0000)
+		return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7206)
 static inline int sci_rxd_in(struct uart_port *port)
 {
@@ -634,7 +687,9 @@
  * -- Mitch Davis - 15 Jul 2000
  */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h
index 2f89dd0..794c36d 100644
--- a/include/asm-sh/bug.h
+++ b/include/asm-sh/bug.h
@@ -2,50 +2,80 @@
 #define __ASM_SH_BUG_H
 
 #ifdef CONFIG_BUG
-
-struct bug_frame {
-	unsigned short	opcode;
-	unsigned short	line;
-	const char	*file;
-	const char	*func;
-};
-
-struct pt_regs;
-
-extern void handle_BUG(struct pt_regs *);
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
 
 #define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
 
+/**
+ * _EMIT_BUG_ENTRY
+ * %1 - __FILE__
+ * %2 - __LINE__
+ * %3 - trap type
+ * %4 - sizeof(struct bug_entry)
+ *
+ * The trapa opcode itself sits in %0.
+ * The %O notation is used to avoid # generation.
+ *
+ * The offending file and line are encoded in the __bug_table section.
+ */
 #ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"a\"\n"	\
+	"2:\t.long 1b, %O1\n"			\
+	"\t.short %O2, %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"a\"\n"	\
+	"2:\t.long 1b\n"			\
+	"\t.short %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#endif
 
 #define BUG()						\
 do {							\
 	__asm__ __volatile__ (				\
-		".align	2\n\t"				\
-		".short	%O0\n\t"			\
-		".short	%O1\n\t"			\
-		".long	%O2\n\t"			\
-		".long	%O3\n\t"			\
-		:					\
-		: "n" (TRAPA_BUG_OPCODE),		\
-		  "i" (__LINE__), "X" (__FILE__),	\
-		  "X" (__FUNCTION__));			\
+		"1:\t.short %O0\n"			\
+		_EMIT_BUG_ENTRY				\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__), "i" (0),		\
+		   "i" (sizeof(struct bug_entry)));	\
 } while (0)
 
-#else
-
-#define BUG()					\
-do {						\
-	__asm__ __volatile__ (			\
-		".align	2\n\t"			\
-		".short	%O0\n\t"		\
-		:				\
-		: "n" (TRAPA_BUG_OPCODE));	\
+#define __WARN()					\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		 _EMIT_BUG_ENTRY			\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__),			\
+		   "i" (BUGFLAG_WARNING),		\
+		   "i" (sizeof(struct bug_entry)));	\
 } while (0)
 
-#endif /* CONFIG_DEBUG_BUGVERBOSE */
+#define WARN_ON(x) ({						\
+	typeof(x) __ret_warn_on = (x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		if (unlikely(__ret_warn_on))			\
+			__WARN();				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
 
-#define HAVE_ARCH_BUG
+struct pt_regs;
+
+/* arch/sh/kernel/traps.c */
+void handle_BUG(struct pt_regs *);
 
 #endif /* CONFIG_BUG */
 
diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h
index 1df9280..386d797 100644
--- a/include/asm-sh/clock.h
+++ b/include/asm-sh/clock.h
@@ -13,7 +13,7 @@
 	void (*enable)(struct clk *clk);
 	void (*disable)(struct clk *clk);
 	void (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate);
+	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
 };
 
 struct clk {
@@ -48,6 +48,34 @@
 int clk_register(struct clk *);
 void clk_unregister(struct clk *);
 
-int show_clocks(struct seq_file *m);
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
 
+enum clk_sh_algo_id {
+	NO_CHANGE = 0,
+
+	IUS_N1_N1,
+	IUS_322,
+	IUS_522,
+	IUS_N11,
+
+	SB_N1,
+
+	SB3_N1,
+	SB3_32,
+	SB3_43,
+	SB3_54,
+
+	BP_N1,
+
+	IP_N1,
+};
 #endif /* __ASM_SH_CLOCK_H */
diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/include/asm-sh/cpu-sh3/mmu_context.h
index bccb7dd..4704e86 100644
--- a/include/asm-sh/cpu-sh3/mmu_context.h
+++ b/include/asm-sh/cpu-sh3/mmu_context.h
@@ -32,6 +32,7 @@
     defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7300) || \
     defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7712) || \
     defined(CONFIG_CPU_SUBTYPE_SH7710)
 #define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
 #else
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
index 602d061..86564e7 100644
--- a/include/asm-sh/cpu-sh4/freq.h
+++ b/include/asm-sh/cpu-sh4/freq.h
@@ -12,8 +12,16 @@
 
 #if defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7722)
 #define FRQCR		        0xa4150000
+#define VCLKCR			0xa4150004
+#define SCLKACR			0xa4150008
+#define SCLKBCR			0xa415000c
+#define IrDACLKCR		0xa4150010
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define	FRQCR			0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define FRQCR0			0xffc80000
+#define FRQCR1			0xffc80004
+#define FRQMR1			0xffc80014
 #else
 #define FRQCR			0xffc00000
 #endif
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index afe188f..e81bf21 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -2,94 +2,13 @@
 #define __ASM_SH_IRQ_H
 
 #include <asm/machvec.h>
-#include <asm/ptrace.h>		/* for pt_regs */
 
-/* NR_IRQS is made from three components:
- *   1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules
- *   2. PINT_NR_IRQS   - number of PINT interrupts
- *   3. OFFCHIP_NR_IRQS - numbe of IRQs from off-chip peripherial modules
+/*
+ * A sane default based on a reasonable vector table size, platforms are
+ * advised to cap this at the hard limit that they're interested in
+ * through the machvec.
  */
-
-/* 1. ONCHIP_NR_IRQS */
-#if defined(CONFIG_CPU_SUBTYPE_SH7604)
-# define ONCHIP_NR_IRQS 24	// Actually 21
-#elif defined(CONFIG_CPU_SUBTYPE_SH7707)
-# define ONCHIP_NR_IRQS 64
-# define PINT_NR_IRQS   16
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-# define ONCHIP_NR_IRQS 32
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define ONCHIP_NR_IRQS 64	// Actually 61
-# define PINT_NR_IRQS   16
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
-# define ONCHIP_NR_IRQS 104
-#elif defined(CONFIG_CPU_SUBTYPE_SH7750)
-# define ONCHIP_NR_IRQS 48	// Actually 44
-#elif defined(CONFIG_CPU_SUBTYPE_SH7751)
-# define ONCHIP_NR_IRQS 72
-#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-# define ONCHIP_NR_IRQS 112	/* XXX */
-#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-# define ONCHIP_NR_IRQS 72
-#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-# define ONCHIP_NR_IRQS 144
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
-      defined(CONFIG_CPU_SUBTYPE_SH73180) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7343) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define ONCHIP_NR_IRQS 109
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-# define ONCHIP_NR_IRQS 111
-#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
-# define ONCHIP_NR_IRQS 256
-#elif defined(CONFIG_CPU_SUBTYPE_SH7619)
-# define ONCHIP_NR_IRQS 128
-#elif defined(CONFIG_SH_UNKNOWN)	/* Most be last */
-# define ONCHIP_NR_IRQS 144
-#endif
-
-/* 2. PINT_NR_IRQS */
-#ifdef CONFIG_SH_UNKNOWN
-# define PINT_NR_IRQS 16
-#else
-# ifndef PINT_NR_IRQS
-#  define PINT_NR_IRQS 0
-# endif
-#endif
-
-#if PINT_NR_IRQS > 0
-# define PINT_IRQ_BASE  ONCHIP_NR_IRQS
-#endif
-
-/* 3. OFFCHIP_NR_IRQS */
-#if defined(CONFIG_HD64461)
-# define OFFCHIP_NR_IRQS 18
-#elif defined(CONFIG_HD64465)
-# define OFFCHIP_NR_IRQS 16
-#elif defined (CONFIG_SH_DREAMCAST)
-# define OFFCHIP_NR_IRQS 96
-#elif defined (CONFIG_SH_TITAN)
-# define OFFCHIP_NR_IRQS 4
-#elif defined(CONFIG_SH_R7780RP)
-# define OFFCHIP_NR_IRQS 16
-#elif defined(CONFIG_SH_7343_SOLUTION_ENGINE)
-# define OFFCHIP_NR_IRQS 12
-#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-# define OFFCHIP_NR_IRQS 14
-#elif defined(CONFIG_SH_UNKNOWN)
-# define OFFCHIP_NR_IRQS 16	/* Must also be last */
-#else
-# define OFFCHIP_NR_IRQS 0
-#endif
-
-#if OFFCHIP_NR_IRQS > 0
-# define OFFCHIP_IRQ_BASE (ONCHIP_NR_IRQS + PINT_NR_IRQS)
-#endif
-
-/* NR_IRQS. 1+2+3 */
-#define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS)
+#define NR_IRQS 256
 
 /*
  * Convert back and forth between INTEVT and IRQ values.
diff --git a/include/asm-sh/kdebug.h b/include/asm-sh/kdebug.h
new file mode 100644
index 0000000..ef009ba
--- /dev/null
+++ b/include/asm-sh/kdebug.h
@@ -0,0 +1,35 @@
+#ifndef __ASM_SH_KDEBUG_H
+#define __ASM_SH_KDEBUG_H
+
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+struct die_args {
+	struct pt_regs *regs;
+	int trapnr;
+};
+
+int register_die_notifier(struct notifier_block *nb);
+int unregister_die_notifier(struct notifier_block *nb);
+int register_page_fault_notifier(struct notifier_block *nb);
+int unregister_page_fault_notifier(struct notifier_block *nb);
+extern struct atomic_notifier_head shdie_chain;
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_TRAP,
+	DIE_PAGE_FAULT,
+};
+
+static inline int notify_die(enum die_val val, struct pt_regs *regs,
+			     int trap, int sig)
+{
+	struct die_args args = {
+		.regs = regs,
+		.trapnr = trap,
+	};
+
+	return atomic_notifier_call_chain(&shdie_chain, val, &args);
+}
+#endif /* __ASM_SH_KDEBUG_H */
diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h
index 9d235af..da36a75 100644
--- a/include/asm-sh/kexec.h
+++ b/include/asm-sh/kexec.h
@@ -1,5 +1,8 @@
-#ifndef _SH_KEXEC_H
-#define _SH_KEXEC_H
+#ifndef __ASM_SH_KEXEC_H
+#define __ASM_SH_KEXEC_H
+
+#include <asm/ptrace.h>
+#include <asm/string.h>
 
 /*
  * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
@@ -25,8 +28,37 @@
 
 #define MAX_NOTE_BYTES 1024
 
-/* Provide a dummy definition to avoid build failures. */
 static inline void crash_setup_regs(struct pt_regs *newregs,
-					struct pt_regs *oldregs) { }
+				    struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		__asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
+		__asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
+		__asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
+		__asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
+		__asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
+		__asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
+		__asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
+		__asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
+		__asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
+		__asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
+		__asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
+		__asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
+		__asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
+		__asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
+		__asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
+		__asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
 
-#endif /* _SH_KEXEC_H */
+		__asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
+		__asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
+		__asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
+
+		__asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
+		__asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
+
+		newregs->pc = (unsigned long)current_text_addr();
+	}
+}
+#endif /* __ASM_SH_KEXEC_H */
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
index 0095c66..74bd095 100644
--- a/include/asm-sh/kgdb.h
+++ b/include/asm-sh/kgdb.h
@@ -17,6 +17,7 @@
 #define __KGDB_H
 
 #include <asm/ptrace.h>
+#include <asm/cacheflush.h>
 
 struct console;
 
@@ -45,35 +46,21 @@
 extern int kgdb_baud;
 extern char kgdb_parity;
 extern char kgdb_bits;
-extern int kgdb_console_setup(struct console *, char *);
 
 /* Init and interface stuff */
 extern int kgdb_init(void);
-extern int (*kgdb_serial_setup)(void);
 extern int (*kgdb_getchar)(void);
 extern void (*kgdb_putchar)(int);
 
-struct kgdb_sermap {
-	char *name;
-	int namelen;
-	int (*setup_fn)(struct console *, char *);
-	struct kgdb_sermap *next;
-};
-extern void kgdb_register_sermap(struct kgdb_sermap *map);
-extern struct kgdb_sermap *kgdb_porttype;
-
 /* Trap functions */
-typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); 
+typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
 typedef void (kgdb_bus_error_hook_t)(void);
 extern kgdb_debug_hook_t  *kgdb_debug_hook;
 extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
 
-extern void breakpoint(void);
-
 /* Console */
-struct console;
 void kgdb_console_write(struct console *co, const char *s, unsigned count);
-void kgdb_console_init(void);
+extern int kgdb_console_setup(struct console *, char *);
 
 /* Prototypes for jmp fns */
 #define _JBLEN 9
@@ -81,11 +68,8 @@
 extern void    longjmp(jmp_buf __jmpb, int __retval);
 extern int     setjmp(jmp_buf __jmpb);
 
-/* Variadic macro to print our own message to the console */
-#define KGDB_PRINTK(...) printk("KGDB: " __VA_ARGS__)
-
 /* Forced breakpoint */
-#define BREAKPOINT()					\
+#define breakpoint()					\
 do {							\
 	if (kgdb_enabled)				\
 		__asm__ __volatile__("trapa   #0x3c");	\
@@ -95,7 +79,6 @@
 #if defined(CONFIG_CPU_SH4)
 #define kgdb_flush_icache_range(start, end) \
 {									\
-	extern void __flush_purge_region(void *, int);			\
 	__flush_purge_region((void*)(start), (int)(end) - (int)(start));\
 	flush_icache_range((start), (end));				\
 }
@@ -103,31 +86,6 @@
 #define kgdb_flush_icache_range(start, end)	do { } while (0)
 #endif
 
-/* Kernel assert macros */
-#ifdef CONFIG_KGDB_KERNEL_ASSERTS
-
-/* Predefined conditions */
-#define KA_VALID_ERRNO(errno) ((errno) > 0 && (errno) <= EMEDIUMTYPE)
-#define KA_VALID_PTR_ERR(ptr) KA_VALID_ERRNO(-PTR_ERR(ptr))
-#define KA_VALID_KPTR(ptr)  (!(ptr) || \
-              ((void *)(ptr) >= (void *)PAGE_OFFSET &&  \
-               (void *)(ptr) < ERR_PTR(-EMEDIUMTYPE)))
-#define KA_VALID_PTRORERR(errptr) \
-               (KA_VALID_KPTR(errptr) || KA_VALID_PTR_ERR(errptr))
-#define KA_HELD_GKL()  (current->lock_depth >= 0)
-
-/* The actual assert */
-#define KGDB_ASSERT(condition, message) do {                   \
-       if (!(condition) && (kgdb_enabled)) {                   \
-               KGDB_PRINTK("Assertion failed at %s:%d: %s\n",  \
-                                  __FILE__, __LINE__, message);\
-               BREAKPOINT();                                   \
-       }                                                       \
-} while (0)
-#else
-#define KGDB_ASSERT(condition, message)
-#endif
-
 /* Taken from sh-stub.c of GDB 4.18 */
 static const char hexchars[] = "0123456789abcdef";
 
@@ -142,5 +100,4 @@
 {
 	return hexchars[x & 0xf];
 }
-
 #endif
diff --git a/include/asm-sh/lboxre2.h b/include/asm-sh/lboxre2.h
new file mode 100644
index 0000000..e6d1605
--- /dev/null
+++ b/include/asm-sh/lboxre2.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_LBOXRE2_H
+#define __ASM_SH_LBOXRE2_H
+
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#define IRQ_CF1		9	/* CF1 */
+#define IRQ_CF0		10	/* CF0 */
+#define IRQ_INTD	11	/* INTD */
+#define IRQ_ETH1	12	/* Ether1 */
+#define IRQ_ETH0	13	/* Ether0 */
+#define IRQ_INTA	14	/* INTA */
+
+void init_lboxre2_IRQ(void);
+
+#define __IO_PREFIX	lboxre2
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_LBOXRE2_H */
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
index 01acaaa..199662b 100644
--- a/include/asm-sh/mmu_context.h
+++ b/include/asm-sh/mmu_context.h
@@ -169,6 +169,8 @@
 #define destroy_context(mm)		do { } while (0)
 #define set_asid(asid)			do { } while (0)
 #define get_asid()			(0)
+#define set_TTB(pgd)			do { } while (0)
+#define get_TTB()			(0)
 #define activate_context(mm,cpu)	do { } while (0)
 #define switch_mm(prev,next,tsk)	do { } while (0)
 #define deactivate_mm(tsk,mm)		do { } while (0)
@@ -211,8 +213,8 @@
  * MMU control handlers for processors lacking memory
  * management hardware.
  */
-#define enable_mmu()	do { BUG(); } while (0)
-#define disable_mmu()	do { BUG(); } while (0)
+#define enable_mmu()	do { } while (0)
+#define disable_mmu()	do { } while (0)
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h
index ac4b467..7464de4 100644
--- a/include/asm-sh/page.h
+++ b/include/asm-sh/page.h
@@ -59,6 +59,7 @@
 extern void (*copy_page)(void *to, void *from);
 
 extern unsigned long shm_align_mask;
+extern unsigned long max_low_pfn, min_low_pfn;
 
 #ifdef CONFIG_MMU
 extern void clear_page_slow(void *to);
@@ -124,17 +125,16 @@
 #define PAGE_OFFSET		CONFIG_PAGE_OFFSET
 #define __pa(x)			((unsigned long)(x)-PAGE_OFFSET)
 #define __va(x)			((void *)((unsigned long)(x)+PAGE_OFFSET))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 
-#define MAP_NR(addr)		(((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-
-#define phys_to_page(phys)	(mem_map + (((phys)-__MEMORY_START) >> PAGE_SHIFT))
-#define page_to_phys(page)	(((page - mem_map) << PAGE_SHIFT) + __MEMORY_START)
+#define phys_to_page(phys)	(pfn_to_page(phys >> PAGE_SHIFT))
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
 
 /* PFN start number, because of __MEMORY_START */
 #define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
 #define ARCH_PFN_OFFSET		(PFN_START)
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_valid(pfn)		(((pfn) - PFN_START) < max_mapnr)
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
diff --git a/include/asm-sh/param.h b/include/asm-sh/param.h
index ce13064..1012296 100644
--- a/include/asm-sh/param.h
+++ b/include/asm-sh/param.h
@@ -5,7 +5,7 @@
 # ifdef CONFIG_SH_WDT
 #  define HZ		1000		/* Needed for high-res WOVF */
 # else
-#  define HZ		100
+#  define HZ		CONFIG_HZ
 # endif
 # define USER_HZ	100		/* User interfaces are in "ticks" */
 # define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index 6ccc948..b1f9a9e 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -35,7 +35,7 @@
 /*
  * I/O routine helpers
  */
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define PCI_IO_AREA		0xFE400000
 #define PCI_IO_SIZE		0x00400000
 #else
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 3e46a7a..d42f68e 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -44,7 +44,7 @@
 	/* SH-3 types */
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,
 	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
-	CPU_SH7709, CPU_SH7709A, CPU_SH7710,
+	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
 	CPU_SH7729, CPU_SH7300,
 
 	/* SH-4 types */
diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h
index c18f648..4083b59 100644
--- a/include/asm-sh/r7780rp.h
+++ b/include/asm-sh/r7780rp.h
@@ -1,17 +1,11 @@
 #ifndef __ASM_SH_RENESAS_R7780RP_H
 #define __ASM_SH_RENESAS_R7780RP_H
 
-/*
- * linux/include/asm-sh/r7780rp.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * Renesas Solutions Highlander R7780RP support
- */
-
 /* Box specific addresses.  */
 #if defined(CONFIG_SH_R7780MP)
 #define PA_BCR          0xa4000000      /* FPGA */
+#define PA_SDPOW	(-1)
+
 #define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
 #define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
 #define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
@@ -70,18 +64,12 @@
 #define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
 #define PA_PMR          (PA_BCR+0x0900) /*  */
 
-#define PA_AX88796L     0xa4100400      /* AX88796L Area */
-#define PA_SC1602BSLB   0xa6000000      /* SC1602BSLB Area */
-#define PA_IDE_OFFSET   0x1f0           /* CF IDE Offset */
-#define AX88796L_IO_BASE        0x1000  /* AX88796L IO Base Address */
-
 #define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
 
 #define IRQ_PCISLOT1    65              /* PCI Slot #1 IRQ */
 #define IRQ_PCISLOT2    66              /* PCI Slot #2 IRQ */
 #define IRQ_PCISLOT3    67              /* PCI Slot #3 IRQ */
 #define IRQ_PCISLOT4    68              /* PCI Slot #4 IRQ */
-// #define IRQ_CFINST   0               /* CF Card Insert IRQ */
 #define IRQ_TP          2               /* Touch Panel IRQ */
 #define IRQ_SCI1        3               /* SCI1 IRQ */
 #define IRQ_SCI0        4               /* SCI0 IRQ */
@@ -95,7 +83,10 @@
 #define IRQ_ONETH       13              /* On board Ethernet IRQ */
 #define IRQ_PSW         14              /* Push Switch IRQ */
 
-#else /* R7780RP */
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7780RP)
+#define PA_POFF		(-1)
 
 #define PA_BCR		0xa5000000	/* FPGA */
 #define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
@@ -163,7 +154,60 @@
 #define IRQ_PSW		13		/* Push Switch IRQ */
 #define IRQ_ZIGBEE	14		/* Ziggbee IO IRQ */
 
-#endif  /* CONFIG_SH_R7780MP */
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SDPOW	(-1)
+
+#define	PA_PCISCR	(PA_BCR+0x0000)
+#define PA_IRLPRA	(PA_BCR+0x0002)
+#define	PA_IRLPRB	(PA_BCR+0x0004)
+#define	PA_IRLPRC	(PA_BCR+0x0006)
+#define	PA_IRLPRD	(PA_BCR+0x0008)
+#define IRLCNTR1	(PA_BCR+0x0010)
+#define	PA_IRLPRE	(PA_BCR+0x000a)
+#define	PA_IRLPRF	(PA_BCR+0x000c)
+#define	PA_EXIRLCR	(PA_BCR+0x000e)
+#define	PA_IRLMCR1	(PA_BCR+0x0010)
+#define	PA_IRLMCR2	(PA_BCR+0x0012)
+#define	PA_IRLSSR1	(PA_BCR+0x0014)
+#define	PA_IRLSSR2	(PA_BCR+0x0016)
+#define PA_CFTCR	(PA_BCR+0x0100)
+#define PA_CFPCR	(PA_BCR+0x0102)
+#define PA_PCICR	(PA_BCR+0x0110)
+#define PA_IVDRCTL	(PA_BCR+0x0112)
+#define PA_IVDRSR	(PA_BCR+0x0114)
+#define PA_PDRSTCR	(PA_BCR+0x0116)
+#define PA_POFF		(PA_BCR+0x0120)
+#define PA_LCDCR	(PA_BCR+0x0130)
+#define PA_TPCR		(PA_BCR+0x0140)
+#define PA_TPCKCR	(PA_BCR+0x0142)
+#define PA_TPRSTR	(PA_BCR+0x0144)
+#define PA_TPXPDR	(PA_BCR+0x0146)
+#define PA_TPYPDR	(PA_BCR+0x0148)
+#define PA_GPIOPFR	(PA_BCR+0x0150)
+#define PA_GPIODR	(PA_BCR+0x0152)
+#define PA_OBLED	(PA_BCR+0x0154)
+#define PA_SWSR		(PA_BCR+0x0156)
+#define PA_VERREG	(PA_BCR+0x0158)
+#define PA_SMCR		(PA_BCR+0x0200)
+#define PA_SMSMADR	(PA_BCR+0x0202)
+#define PA_SMMR		(PA_BCR+0x0204)
+#define PA_SMSADR1	(PA_BCR+0x0206)
+#define PA_SMSADR32	(PA_BCR+0x0244)
+#define PA_SMTRDR1	(PA_BCR+0x0246)
+#define PA_SMTRDR16	(PA_BCR+0x0264)
+#define PA_CU3MDR	(PA_BCR+0x0300)
+#define PA_CU5MDR	(PA_BCR+0x0302)
+#define PA_MMSR		(PA_BCR+0x0400)
+
+#define IVDR_CK_ON	4		/* iVDR Clock ON */
+
+#endif
+
+void make_r7780rp_irq(unsigned int irq);
+void highlander_init_irq(void);
 
 #define __IO_PREFIX	r7780rp
 #include <asm/io_generic.h>
diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h
index a183215..bd2596c 100644
--- a/include/asm-sh/se.h
+++ b/include/asm-sh/se.h
@@ -69,9 +69,11 @@
 #define BCR_ILCRG	(PA_BCR + 12)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
-#define IRQ_STNIC   12
+#define IRQ_STNIC	12
+#define IRQ_CFCARD	14
 #else
 #define IRQ_STNIC	10
+#define IRQ_CFCARD	7
 #endif
 
 #define __IO_PREFIX	se
diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h
new file mode 100644
index 0000000..b3b31e4
--- /dev/null
+++ b/include/asm-sh/se7722.h
@@ -0,0 +1,118 @@
+#ifndef __ASM_SH_SE7722_H
+#define __ASM_SH_SE7722_H
+
+/*
+ * linux/include/asm-sh/se7722.h
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* DDR-SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB0000000
+
+#define PA_PCIC         PA_PERIPHERAL   		/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    (PA_PERIPHERAL + 0x00600000)    /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define PA_LED		(PA_PERIPHERAL + 0x00800000)	/* 8bit LED */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01800000) 	/* FPGA base address */
+
+#define PA_LAN		(PA_AREA6_IO + 0)		/* SMC LAN91C111 */
+/* GPIO */
+#define MSTPCR0         0xA4150030UL
+#define MSTPCR1         0xA4150034UL
+#define MSTPCR2         0xA4150038UL
+
+#define FPGA_IN         0xb1840000UL
+#define FPGA_OUT        0xb1840004UL
+
+#define PORT_PECR       0xA4050108UL
+#define PORT_PJCR       0xA4050110UL
+#define PORT_PSELD      0xA4050154UL
+#define PORT_PSELB      0xA4050150UL
+
+#define PORT_PSELC      0xA4050152UL
+#define PORT_PKCR       0xA4050112UL
+#define PORT_PHCR       0xA405010EUL
+#define PORT_PLCR       0xA4050114UL
+#define PORT_PMCR       0xA4050116UL
+#define PORT_PRCR       0xA405011CUL
+#define PORT_PXCR       0xA4050148UL
+#define PORT_PSELA      0xA405014EUL
+#define PORT_PYCR       0xA405014AUL
+#define PORT_PZCR       0xA405014CUL
+
+/* IRQ */
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+#define INTC_ICR0       0xA4140000UL
+#define INTC_ICR1       0xA414001CUL
+
+#define INTMSK0         0xa4140044
+#define INTMSKCLR0      0xa4140064
+#define INTC_INTPRI0    0xa4140010
+
+#define IRQ01_MODE      0xb1800000
+#define IRQ01_STS       0xb1800004
+#define IRQ01_MASK      0xb1800008
+#define EXT_BIT		(0x3fc0)        /* SH IRQ1 */
+#define MRSHPC_BIT0	(0x0004)        /* SH IRQ1 */
+#define MRSHPC_BIT1	(0x0008)        /* SH IRQ1 */
+#define MRSHPC_BIT2	(0x0010)        /* SH IRQ1 */
+#define MRSHPC_BIT3	(0x0020)        /* SH IRQ1 */
+#define SMC_BIT		(0x0002)        /* SH IRQ0 */
+#define USB_BIT		(0x0001)        /* SH IRQ0 */
+
+#define MRSHPC_IRQ3    	11
+#define MRSHPC_IRQ2    	12
+#define MRSHPC_IRQ1    	13
+#define MRSHPC_IRQ0    	14
+#define SMC_IRQ		10
+#define EXT_IRQ		5
+#define USB_IRQ		6
+
+
+/* arch/sh/boards/se/7722/irq.c */
+void init_se7722_IRQ(void);
+int se7722_irq_demux(int);
+
+#define __IO_PREFIX		se7722
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7722_H */
diff --git a/include/asm-sh/se7751.h b/include/asm-sh/se7751.h
index 88cd379..02ca934 100644
--- a/include/asm-sh/se7751.h
+++ b/include/asm-sh/se7751.h
@@ -65,6 +65,8 @@
 
 #define IRQ_79C973	13
 
+void init_7751se_IRQ(void);
+
 #define __IO_PREFIX	sh7751se
 #include <asm/io_generic.h>
 
diff --git a/include/asm-sh/se7780.h b/include/asm-sh/se7780.h
new file mode 100644
index 0000000..40e9b41
--- /dev/null
+++ b/include/asm-sh/se7780.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_SH_SE7780_H
+#define __ASM_SH_SE7780_H
+
+/*
+ * linux/include/asm-sh/se7780.h
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SM501	PA_EXT1		/* Graphic IC (SM501) */
+#define PA_SM501_SIZE	PA_EXT1_SIZE	/* Graphic IC (SM501) */
+#define PA_SDRAM	0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_FLASH	PA_EXT4		/* Expansion Flash-ROM */
+
+#define PA_PERIPHERAL	PA_AREA6_IO	/* SW6-6=ON */
+
+#define PA_LAN		(PA_PERIPHERAL + 0)		/* SMC LAN91C111 */
+#define PA_LED_DISP	(PA_PERIPHERAL + 0x02000000)	/* 8words LED Display */
+#define DISP_CHAR_RAM	(7 << 3)
+#define DISP_SEL0_ADDR	(DISP_CHAR_RAM + 0)
+#define DISP_SEL1_ADDR	(DISP_CHAR_RAM + 1)
+#define DISP_SEL2_ADDR	(DISP_CHAR_RAM + 2)
+#define DISP_SEL3_ADDR	(DISP_CHAR_RAM + 3)
+#define DISP_SEL4_ADDR	(DISP_CHAR_RAM + 4)
+#define DISP_SEL5_ADDR	(DISP_CHAR_RAM + 5)
+#define DISP_SEL6_ADDR	(DISP_CHAR_RAM + 6)
+#define DISP_SEL7_ADDR	(DISP_CHAR_RAM + 7)
+
+#define DISP_UDC_RAM	(5 << 3)
+#define PA_FPGA		(PA_PERIPHERAL + 0x03000000) /* FPGA base address */
+
+/* FPGA register address and bit */
+#define FPGA_SFTRST		(PA_FPGA + 0)	/* Soft reset register */
+#define FPGA_INTMSK1		(PA_FPGA + 2)	/* Interrupt Mask register 1 */
+#define FPGA_INTMSK2		(PA_FPGA + 4)	/* Interrupt Mask register 2 */
+#define FPGA_INTSEL1		(PA_FPGA + 6)	/* Interrupt select register 1 */
+#define FPGA_INTSEL2		(PA_FPGA + 8)	/* Interrupt select register 2 */
+#define FPGA_INTSEL3		(PA_FPGA + 10)	/* Interrupt select register 3 */
+#define FPGA_PCI_INTSEL1	(PA_FPGA + 12)	/* PCI Interrupt select register 1 */
+#define FPGA_PCI_INTSEL2	(PA_FPGA + 14)	/* PCI Interrupt select register 2 */
+#define FPGA_INTSET		(PA_FPGA + 16)	/* IRQ/IRL select register */
+#define FPGA_INTSTS1		(PA_FPGA + 18)	/* Interrupt status register 1 */
+#define FPGA_INTSTS2		(PA_FPGA + 20)	/* Interrupt status register 2 */
+#define FPGA_REQSEL		(PA_FPGA + 22)	/* REQ/GNT select register */
+#define FPGA_DBG_LED		(PA_FPGA + 32)	/* Debug LED(D-LED[8:1] */
+#define PA_LED			FPGA_DBG_LED
+#define FPGA_IVDRID		(PA_FPGA + 36)	/* iVDR ID Register */
+#define FPGA_IVDRPW		(PA_FPGA + 38)	/* iVDR Power ON Register */
+#define FPGA_MMCID		(PA_FPGA + 40)	/* MMC ID Register */
+
+/* FPGA INTSEL position */
+/* INTSEL1 */
+#define IRQPOS_SMC91CX          (0 * 4)
+#define IRQPOS_SM501            (1 * 4)
+/* INTSEL2 */
+#define IRQPOS_EXTINT1          (0 * 4)
+#define IRQPOS_EXTINT2          (1 * 4)
+#define IRQPOS_EXTINT3          (2 * 4)
+#define IRQPOS_EXTINT4          (3 * 4)
+/* INTSEL3 */
+#define IRQPOS_PCCPW            (0 * 4)
+
+/* IDE interrupt */
+#define IRQ_IDE0                67 /* iVDR */
+
+/* SMC interrupt */
+#define SMC_IRQ                 8
+
+/* SM501 interrupt */
+#define SM501_IRQ               0
+
+/* interrupt pin */
+#define IRQPIN_EXTINT1          0 /* IRQ0 pin */
+#define IRQPIN_EXTINT2          1 /* IRQ1 pin */
+#define IRQPIN_EXTINT3          2 /* IRQ2 pin */
+#define IRQPIN_SMC91CX          3 /* IRQ3 pin */
+#define IRQPIN_EXTINT4          4 /* IRQ4 pin */
+#define IRQPIN_PCC0             5 /* IRQ5 pin */
+#define IRQPIN_PCC2             6 /* IRQ6 pin */
+#define IRQPIN_SM501            7 /* IRQ7 pin */
+#define IRQPIN_PCCPW            7 /* IRQ7 pin */
+
+/* arch/sh/boards/se/7780/irq.c */
+void init_se7780_IRQ(void);
+
+#define __IO_PREFIX		se7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7780_H */
diff --git a/include/asm-sh/stat.h b/include/asm-sh/stat.h
index 6c41a60..6d6ad26 100644
--- a/include/asm-sh/stat.h
+++ b/include/asm-sh/stat.h
@@ -16,15 +16,13 @@
 };
 
 struct stat {
-	unsigned short st_dev;
-	unsigned short __pad1;
-	unsigned long st_ino;
+	unsigned long  st_dev;
+	unsigned long  st_ino;
 	unsigned short st_mode;
 	unsigned short st_nlink;
 	unsigned short st_uid;
 	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned short __pad2;
+	unsigned long  st_rdev;
 	unsigned long  st_size;
 	unsigned long  st_blksize;
 	unsigned long  st_blocks;
@@ -38,8 +36,6 @@
 	unsigned long  __unused5;
 };
 
-#define STAT_HAVE_NSEC 1
-
 /* This matches struct stat64 in glibc2.1, hence the absolutely
  * insane amounts of padding around dev_t's.
  */
@@ -47,7 +43,9 @@
 	unsigned long long	st_dev;
 	unsigned char	__pad0[4];
 
-	unsigned long	st_ino;
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
 	unsigned int	st_mode;
 	unsigned int	st_nlink;
 
@@ -71,8 +69,9 @@
 	unsigned long	st_ctime;
 	unsigned long	st_ctime_nsec; 
 
-	unsigned long	__unused1;
-	unsigned long	__unused2;
+	unsigned long long	st_ino;
 };
 
+#define STAT_HAVE_NSEC 1
+
 #endif /* __ASM_SH_STAT_H */
diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h
index 4a6a19f..127af30 100644
--- a/include/asm-sh/system.h
+++ b/include/asm-sh/system.h
@@ -9,6 +9,7 @@
 #include <linux/irqflags.h>
 #include <linux/compiler.h>
 #include <asm/types.h>
+#include <asm/ptrace.h>
 
 /*
  *	switch_to() should switch tasks to task nr n, first
@@ -255,6 +256,8 @@
 				    (unsigned long)_n_, sizeof(*(ptr))); \
   })
 
+extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+
 extern void *set_exception_table_vec(unsigned int vec, void *handler);
 
 static inline void *set_exception_table_evt(unsigned int evt, void *handler)
diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c
index 7ea9acc..b493660 100644
--- a/sound/oss/sh_dac_audio.c
+++ b/sound/oss/sh_dac_audio.c
@@ -104,7 +104,7 @@
 	unsigned long interval;
  	struct clk *clk;
 
- 	clk = clk_get("module_clk");
+ 	clk = clk_get(NULL, "module_clk");
  	interval = (clk_get_rate(clk) / 4) / rate;
  	clk_put(clk);
 	ctrl_outl(interval, TMU1_TCOR);