cirrus: Move the Cirrus network driver
Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/
and make the necessary Kconfig and Makefile changes
CC: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 96a2d47..ee4ebb4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1768,7 +1768,7 @@
M: Hartley Sweeten <hsweeten@visionengravers.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/arm/ep93xx_eth.c
+F: drivers/net/ethernet/cirrus/ep93xx_eth.c
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
M: Lennert Buytenhek <kernel@wantstofly.org>
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 4f748cc..fc94b4bd 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -11,14 +11,6 @@
If you wish to compile a kernel for the AT91RM9200 and enable
ethernet support, then you should always answer Y to this.
-config EP93XX_ETH
- tristate "EP93xx Ethernet support"
- depends on ARM && ARCH_EP93XX
- select MII
- help
- This is a driver for the ethernet hardware included in EP93xx CPUs.
- Say Y if you are building a kernel for EP93xx based devices.
-
config W90P910_ETH
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 316b06c..462b3a4 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -4,5 +4,4 @@
#
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
-obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index b15b1e2..ff07408 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -18,6 +18,7 @@
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
source "drivers/net/ethernet/dec/Kconfig"
source "drivers/net/ethernet/dlink/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 1f45ec9..3a17413 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
obj-$(CONFIG_NET_VENDOR_DEC) += dec/
obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
new file mode 100644
index 0000000..53ebe78
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -0,0 +1,28 @@
+#
+# Cirrus network device configuration
+#
+
+config NET_VENDOR_CIRRUS
+ bool "Cirrus devices"
+ depends on ARM && ARCH_EP93XX
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Cirrus cards. If you say Y, you will be asked
+ for your specific card in the following questions.
+
+if NET_VENDOR_CIRRUS
+
+config EP93XX_ETH
+ tristate "EP93xx Ethernet support"
+ depends on ARM && ARCH_EP93XX
+ select MII
+ help
+ This is a driver for the ethernet hardware included in EP93xx CPUs.
+ Say Y if you are building a kernel for EP93xx based devices.
+
+endif # NET_VENDOR_CIRRUS
diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile
new file mode 100644
index 0000000..9905ea2
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Cirrus network device drivers.
+#
+
+obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c
similarity index 100%
rename from drivers/net/arm/ep93xx_eth.c
rename to drivers/net/ethernet/cirrus/ep93xx_eth.c
