sh: Kill off unused SE7619 I/O ops.
This can use the generic routines, so kill off the board-specific ones.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
index 3666eca..d21775c 100644
--- a/arch/sh/boards/se/7619/Makefile
+++ b/arch/sh/boards/se/7619/Makefile
@@ -2,4 +2,4 @@
# Makefile for the 7619 SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o
+obj-y := setup.o
diff --git a/arch/sh/boards/se/7619/io.c b/arch/sh/boards/se/7619/io.c
deleted file mode 100644
index 2f105c3..0000000
--- a/arch/sh/boards/se/7619/io.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *
- * linux/arch/sh/boards/se/7619/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7619 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7619.h>
-#include <asm/irq.h>
-
-/* FIXME: M3A-ZAB7 Compact Flash Slot support */
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000); /* Uncached ROM area (P2) */
-}
-
-#define badio(name,port) \
- printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-unsigned char se7619_inb(unsigned long port)
-{
- badio(inb, port);
- return 0;
-}
-
-unsigned char se7619_inb_p(unsigned long port)
-{
- badio(inb_p, port);
- delay();
- return 0;
-}
-
-unsigned short se7619_inw(unsigned long port)
-{
- badio(inw, port);
- return 0;
-}
-
-unsigned int se7619_inl(unsigned long port)
-{
- badio(inl, port);
- return 0;
-}
-
-void se7619_outb(unsigned char value, unsigned long port)
-{
- badio(outb, port);
-}
-
-void se7619_outb_p(unsigned char value, unsigned long port)
-{
- badio(outb_p, port);
- delay();
-}
-
-void se7619_outw(unsigned short value, unsigned long port)
-{
- badio(outw, port);
-}
-
-void se7619_outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void se7619_insb(unsigned long port, void *addr, unsigned long count)
-{
- badio(inw, port);
-}
-
-void se7619_insw(unsigned long port, void *addr, unsigned long count)
-{
- badio(inw, port);
-}
-
-void se7619_insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void se7619_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void se7619_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void se7619_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c
index d1b516e..52d2c4d 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/se/7619/setup.c
@@ -8,7 +8,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/se7619.h>
#include <asm/io.h>
#include <asm/machvec.h>
@@ -19,25 +18,5 @@
struct sh_machine_vector mv_se __initmv = {
.mv_name = "SolutionEngine",
.mv_nr_irqs = 108,
- .mv_inb = se7619_inb,
- .mv_inw = se7619_inw,
- .mv_inl = se7619_inl,
- .mv_outb = se7619_outb,
- .mv_outw = se7619_outw,
- .mv_outl = se7619_outl,
-
- .mv_inb_p = se7619_inb_p,
- .mv_inw_p = se7619_inw,
- .mv_inl_p = se7619_inl,
- .mv_outb_p = se7619_outb_p,
- .mv_outw_p = se7619_outw,
- .mv_outl_p = se7619_outl,
-
- .mv_insb = se7619_insb,
- .mv_insw = se7619_insw,
- .mv_insl = se7619_insl,
- .mv_outsb = se7619_outsb,
- .mv_outsw = se7619_outsw,
- .mv_outsl = se7619_outsl,
};
ALIAS_MV(se)
