/*
 * Reference Device Tree Source for the Bock-W board
 *
 * Copyright (C) 2013  Renesas Solutions Corp.
 * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 *
 * based on r8a7779
 *
 * Copyright (C) 2013 Renesas Solutions Corp.
 * Copyright (C) 2013 Simon Horman
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

/dts-v1/;
#include "r8a7778.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "bockw";
	compatible = "renesas,bockw-reference", "renesas,r8a7778";

	chosen {
		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
	};

	memory {
		device_type = "memory";
		reg = <0x60000000 0x10000000>;
	};

	fixedregulator3v3: fixedregulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};

	ethernet@18300000 {
		compatible = "smsc,lan9220", "smsc,lan9115";
		reg = <0x18300000 0x1000>;

		phy-mode = "mii";
		interrupt-parent = <&irqpin>;
		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
		reg-io-width = <4>;
		vddvario-supply = <&fixedregulator3v3>;
		vdd33a-supply = <&fixedregulator3v3>;
	};

};

&mmcif {
	pinctrl-0 = <&mmc_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&fixedregulator3v3>;
	bus-width = <8>;
	broken-cd;
	status = "okay";
};

&irqpin {
	status = "okay";
};

&pfc {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	scif0_pins: serial0 {
		renesas,groups = "scif0_data_a", "scif0_ctrl";
		renesas,function = "scif0";
	};

	mmc_pins: mmc {
		renesas,groups = "mmc_data8", "mmc_ctrl";
		renesas,function = "mmc";
	};

	sdhi0_pins: sd0 {
		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
				  "sdhi0_cd";
		renesas,function = "sdhi0";
	};

	hspi0_pins: hspi0 {
		renesas,groups = "hspi0_a";
		renesas,function = "hspi0";
	};
};

&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&fixedregulator3v3>;
	bus-width = <4>;
	status = "okay";
	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
};

&hspi0 {
	pinctrl-0 = <&hspi0_pins>;
	pinctrl-names = "default";
	status = "okay";
};