diff --git a/.gitignore b/.gitignore
index 869e1a3..51bd99d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -49,6 +49,7 @@
 include/linux/version.h
 include/linux/utsrelease.h
 include/linux/bounds.h
+include/generated
 
 # stgit generated dirs
 patches-*
diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index e8ffc70..4f9ba3c 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -69,9 +69,13 @@
 		gpe1F:	     0	invalid
 		gpe_all:    1192
 		sci:	1194
+		sci_not:     0	
 
-		sci - The total number of times the ACPI SCI
-		has claimed an interrupt.
+		sci - The number of times the ACPI SCI
+		has been called and claimed an interrupt.
+
+		sci_not - The number of times the ACPI SCI
+		has been called and NOT claimed an interrupt.
 
 		gpe_all - count of SCI caused by GPEs.
 
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index ecad6ee..6fab97e 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -1040,23 +1040,21 @@
 iii. Plugging the queue to batch requests in anticipation of opportunities for
      merge/sort optimizations
 
-This is just the same as in 2.4 so far, though per-device unplugging
-support is anticipated for 2.5. Also with a priority-based i/o scheduler,
-such decisions could be based on request priorities.
-
 Plugging is an approach that the current i/o scheduling algorithm resorts to so
 that it collects up enough requests in the queue to be able to take
 advantage of the sorting/merging logic in the elevator. If the
 queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bottom of a vessel to get fluid to build up)
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
 till it fills up with a few more requests, before starting to service
 the requests. This provides an opportunity to merge/sort the requests before
 passing them down to the device. There are various conditions when the queue is
 unplugged (to open up the flow again), either through a scheduled task or
 could be on demand. For example wait_on_buffer sets the unplugging going
-(by running tq_disk) so the read gets satisfied soon. So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion,
-in fact all queues get unplugged as a side-effect.
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
 
 Aside:
   This is kind of controversial territory, as it's not clear if plugging is
@@ -1067,11 +1065,6 @@
   multi-page bios being queued in one shot, we may not need to wait to merge
   a big request from the broken up pieces coming by.
 
-  Per-queue granularity unplugging (still a Todo) may help reduce some of the
-  concerns with just a single tq_disk flush approach. Something like
-  blk_kick_queue() to unplug a specific queue (right away ?)
-  or optionally, all queues, is in the plan.
-
 4.4 I/O contexts
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,
diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 83009fdc..2e2c2ea 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -169,3 +169,62 @@
       be probed later if another device registers.  (Which is OK, since
       this interface is only for use with non-hotpluggable devices.)
 
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.
diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt
index c78a49b..748a1ae 100644
--- a/Documentation/filesystems/caching/cachefiles.txt
+++ b/Documentation/filesystems/caching/cachefiles.txt
@@ -407,7 +407,7 @@
 ==================
 
 CacheFiles makes use of the split security in the task_struct.  It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
 when it acts on behalf of another process, in that process's context.
 
 The reason it does this is that it calls vfs_mkdir() and suchlike rather than
@@ -429,9 +429,9 @@
 the process looks like in /proc.
 
 So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as).  The
-objective security holds the intrinsic security properties of a process and is
-never overridden.  This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden.  This is what appears in /proc, and is what is used when a
 process is the target of an operation by some other process (SIGKILL for
 example).
 
diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt
index 6d6db60..dcf8335 100644
--- a/Documentation/filesystems/pohmelfs/design_notes.txt
+++ b/Documentation/filesystems/pohmelfs/design_notes.txt
@@ -56,9 +56,10 @@
 data transfers.
 
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode
diff --git a/Documentation/filesystems/pohmelfs/info.txt b/Documentation/filesystems/pohmelfs/info.txt
index 4e3d501..db2e413 100644
--- a/Documentation/filesystems/pohmelfs/info.txt
+++ b/Documentation/filesystems/pohmelfs/info.txt
@@ -1,6 +1,8 @@
 POHMELFS usage information.
 
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
 idx=%u
  Each mountpoint is associated with a special index via this option.
  Administrator can add or remove servers from the given index, so all mounts,
@@ -52,16 +54,27 @@
 
 Usage examples.
 
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
 with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
 
 Mount filesystem with given index $idx to /mnt mountpoint.
 Client will connect to all servers specified in the working set via previous command:
 mount -t pohmel -o idx=$idx q /mnt
 
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
 
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
+
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
 
 Server installation.
 
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index deeeed0..f49eecf 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -277,8 +277,7 @@
   unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
   	again.
 
-  statfs: called when the VFS needs to get filesystem statistics. This
-	is called with the kernel lock held
+  statfs: called when the VFS needs to get filesystem statistics.
 
   remount_fs: called when the filesystem is remounted. This is called
 	with the kernel lock held
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index d4b0567..d76cfd8 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -316,6 +316,16 @@
 		#arch/m68k/fpsp040/Makefile
 		ldflags-y := -x
 
+    subdir-ccflags-y, subdir-asflags-y
+	The two flags listed above are similar to ccflags-y and as-falgs-y.
+	The difference is that the subdir- variants has effect for the kbuild
+	file where tey are present and all subdirectories.
+	Options specified using subdir-* are added to the commandline before
+	the options specified using the non-subdir variants.
+
+	Example:
+		subdir-ccflags-y := -Werror
+
     CFLAGS_$@, AFLAGS_$@
 
 	CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6172e43..90b3924 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -134,7 +134,7 @@
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
 
-	acpi=		[HW,ACPI,X86-64,i386]
+	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
 			Format: { force | off | ht | strict | noirq | rsdt }
 			force -- enable ACPI if default was off
@@ -218,7 +218,7 @@
 			acpi_osi="!string2"	# remove built-in string2
 			acpi_osi=		# disable all strings
 
-	acpi_pm_good	[X86-32,X86-64]
+	acpi_pm_good	[X86]
 			Override the pmtimer bug detection: force the kernel
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
@@ -231,6 +231,35 @@
  			power state again in power transition.
  			1 : disable the power state check
 
+	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
+			Format: { level | edge | high | low }
+
+	acpi_serialize	[HW,ACPI] force serialization of AML methods
+
+	acpi_skip_timer_override [HW,ACPI]
+			Recognize and ignore IRQ0/pin2 Interrupt Override.
+			For broken nForce2 BIOS resulting in XT-PIC timer.
+
+	acpi_sleep=	[HW,ACPI] Sleep options
+			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
+				  old_ordering, s4_nonvs }
+			See Documentation/power/video.txt for information on
+			s3_bios and s3_mode.
+			s3_beep is for debugging; it makes the PC's speaker beep
+			as soon as the kernel's real-mode entry point is called.
+			s4_nohwsig prevents ACPI hardware signature from being
+			used during resume from hibernation.
+			old_ordering causes the ACPI 1.0 ordering of the _PTS
+			control method, with respect to putting devices into
+			low power states, to be enforced (the ACPI 2.0 ordering
+			of _PTS is used by default).
+			s4_nonvs prevents the kernel from saving/restoring the
+			ACPI NVS memory during hibernation.
+
+	acpi_use_timer_override [HW,ACPI]
+			Use timer override. For some broken Nvidia NF5 boards
+			that require a timer override, but don't have HPET
+
 	acpi_enforce_resources=	[ACPI]
 			{ strict | lax | no }
 			Check for resource conflicts between native drivers
@@ -250,6 +279,9 @@
 	ad1848=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>,<type>
 
+	add_efi_memmap	[EFI; X86] Include EFI memory map in
+			kernel's map of available physical RAM.
+
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
@@ -459,7 +491,7 @@
 			Also note the kernel might malfunction if you disable
 			some critical bits.
 
-	code_bytes	[IA32/X86_64] How many bytes of object code to print
+	code_bytes	[X86] How many bytes of object code to print
 			in an oops report.
 			Range: 0 - 8192
 			Default: 64
@@ -592,7 +624,7 @@
 			MTRR settings.  This parameter disables that behavior,
 			possibly causing your machine to run very slowly.
 
-	disable_timer_pin_1 [i386,x86-64]
+	disable_timer_pin_1 [X86]
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
@@ -624,7 +656,7 @@
 			UART at the specified I/O port or MMIO address.
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86-32,X86-64,SH,BLACKFIN]
+	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=dbgp
@@ -659,7 +691,7 @@
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
-	elfcorehdr=	[IA64,PPC,SH,X86-32,X86_64]
+	elfcorehdr=	[IA64,PPC,SH,X86]
 			Specifies physical address of start of kernel core
 			image elf header. Generally kexec loader will
 			pass this option to capture kernel.
@@ -938,7 +970,7 @@
 			See comment before marvel_specify_io7 in
 			arch/alpha/kernel/core_marvel.c.
 
-	io_delay=	[X86-32,X86-64] I/O delay method
+	io_delay=	[X86] I/O delay method
 		0x80
 			Standard port 0x80 based delay
 		0xed
@@ -1000,7 +1032,7 @@
 
 	keepinitrd	[HW,ARM]
 
-	kernelcore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	kernelcore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			specifies the amount of memory usable by the kernel
 			for non-movable allocations.  The requested amount is
 			spread evenly throughout all nodes in the system. The
@@ -1034,7 +1066,7 @@
 			Configure the RouterBoard 532 series on-chip
 			Ethernet adapter MAC address.
 
-	kstack=N	[X86-32,X86-64] Print N words from the kernel stack
+	kstack=N	[X86] Print N words from the kernel stack
 			in oops dumps.
 
 	l2cr=		[PPC]
@@ -1044,7 +1076,7 @@
 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
 			disabled it.
 
-	lapic_timer_c2_ok	[X86-32,x86-64,APIC] trust the local apic timer
+	lapic_timer_c2_ok	[X86,APIC] trust the local apic timer
 			in C2 power state.
 
 	libata.dma=	[LIBATA] DMA control
@@ -1229,7 +1261,7 @@
 			[KNL,SH] Allow user to override the default size for
 			per-device physically contiguous DMA buffers.
 
-	memmap=exactmap	[KNL,X86-32,X86_64] Enable setting of an exact
+	memmap=exactmap	[KNL,X86] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
 			BIOS output or other requirements. See the memmap=nn@ss
@@ -1320,7 +1352,7 @@
 	mousedev.yres=	[MOUSE] Vertical screen resolution, used for devices
 			reporting absolute coordinates, such as tablets
 
-	movablecore=nn[KMG]	[KNL,X86-32,IA-64,PPC,X86-64] This parameter
+	movablecore=nn[KMG]	[KNL,X86,IA-64,PPC] This parameter
 			is similar to kernelcore except it specifies the
 			amount of memory used for migratable allocations.
 			If both kernelcore and movablecore is specified,
@@ -1422,7 +1454,7 @@
 			when a NMI is triggered.
 			Format: [state][,regs][,debounce][,die]
 
-	nmi_watchdog=	[KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
 			Format: [panic,][num]
 			Valid num: 0,1,2
 			0 - turn nmi_watchdog off
@@ -1475,11 +1507,11 @@
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
-	noefi		[X86-32,X86-64] Disable EFI runtime services support.
+	noefi		[X86] Disable EFI runtime services support.
 
 	noexec		[IA-64]
 
-	noexec		[X86-32,X86-64]
+	noexec		[X86]
 			On X86-32 available only on PAE configured kernels.
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
@@ -1525,7 +1557,7 @@
 	noirqdebug	[X86-32] Disables the code which attempts to detect and
 			disable unhandled interrupt sources.
 
-	no_timer_check	[X86-32,X86_64,APIC] Disables the code which tests for
+	no_timer_check	[X86,APIC] Disables the code which tests for
 			broken timer IRQ sources.
 
 	noisapnp	[ISAPNP] Disables ISA PnP code.
@@ -1588,6 +1620,8 @@
 
 	nowb		[ARM]
 
+	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
+
 	nptcg=		[IA64] Override max number of concurrent global TLB
 			purges which is reported from either PAL_VM_SUMMARY or
 			SAL PALO.
@@ -1689,7 +1723,7 @@
 				disable the use of PCIE advanced error reporting.
 		nodomains	[PCI] Disable support for multiple PCI
 				root domains (aka PCI segments, in ACPI-speak).
-		nommconf	[X86-32,X86_64] Disable use of MMCONFIG for PCI
+		nommconf	[X86] Disable use of MMCONFIG for PCI
 				Configuration
 		nomsi		[MSI] If the PCI_MSI kernel config parameter is
 				enabled, this kernel boot option can be used to
@@ -1838,6 +1872,12 @@
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
+	ports=		[IP_VS_FTP] IPVS ftp helper module
+			Default is 21.
+			Up to 8 (IP_VS_APP_MAX_PORTS) ports
+			may be specified.
+			Format: <port>,<port>....
+
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to
@@ -2380,7 +2420,7 @@
 			reported either.
 
 	unknown_nmi_panic
-			[X86-32,X86-64]
+			[X86]
 			Set unknown_nmi_panic=1 early on boot.
 
 	usbcore.autosuspend=
@@ -2447,12 +2487,12 @@
 					medium is write-protected).
 			Example: quirks=0419:aaf5:rl,0421:0433:rc
 
-	vdso=		[X86-32,SH,x86-64]
+	vdso=		[X86,SH]
 			vdso=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso=1: enable VDSO (default)
 			vdso=0: disable VDSO mapping
 
-	vdso32=		[X86-32,X86-64]
+	vdso32=		[X86]
 			vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
 			vdso32=1: enable 32-bit VDSO (default)
 			vdso32=0: disable 32-bit VDSO mapping
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 3d76507..e7e9a690 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.22
-                        November 23rd,  2008
+                            Version 0.23
+                          April 10th, 2009
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
diff --git a/Documentation/lguest/.gitignore b/Documentation/lguest/.gitignore
new file mode 100644
index 0000000..115587f
--- /dev/null
+++ b/Documentation/lguest/.gitignore
@@ -0,0 +1 @@
+lguest
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index 29510dc..28c7473 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -3,11 +3,11 @@
  /,    /`      - or, A Young Coder's Illustrated Hypervisor
  \\"--\\    http://lguest.ozlabs.org
 
-Lguest is designed to be a minimal hypervisor for the Linux kernel, for
-Linux developers and users to experiment with virtualization with the
-minimum of complexity.  Nonetheless, it should have sufficient
-features to make it useful for specific tasks, and, of course, you are
-encouraged to fork and enhance it (see drivers/lguest/README).
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity.  Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
 
 Features:
 
@@ -37,6 +37,7 @@
      "Paravirtualized guest support" = Y
         "Lguest guest support" = Y
      "High Memory Support" = off/4GB
+     "PAE (Physical Address Extension) Support" = N
      "Alignment value to which kernel should be aligned" = 0x100000
         (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
          CONFIG_PHYSICAL_ALIGN=0x100000)
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 5ede747..0876275 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1242,7 +1242,7 @@
 To add ARP targets:
 # echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
 # echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
-	NOTE:  up to 10 target addresses may be specified.
+	NOTE:  up to 16 target addresses may be specified.
 
 To remove an ARP target:
 # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 0ab0230..d16b7a1 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -43,12 +43,11 @@
     2) Representing devices without a current OF specification
       a) PHY nodes
       b) Interrupt controllers
-      c) CFI or JEDEC memory-mapped NOR flash
-      d) 4xx/Axon EMAC ethernet nodes
-      e) Xilinx IP cores
-      f) USB EHCI controllers
-      g) MDIO on GPIOs
-      h) SPI busses
+      c) 4xx/Axon EMAC ethernet nodes
+      d) Xilinx IP cores
+      e) USB EHCI controllers
+      f) MDIO on GPIOs
+      g) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -999,7 +998,7 @@
       translation of SOC addresses for memory mapped SOC registers.
     - bus-frequency: Contains the bus frequency for the SOC node.
       Typically, the value of this field is filled in by the boot
-      loader. 
+      loader.
 
 
   Recommended properties:
@@ -1287,71 +1286,7 @@
 		device_type = "open-pic";
 	};
 
-   c) CFI or JEDEC memory-mapped NOR flash
-
-    Flash chips (Memory Technology Devices) are often used for solid state
-    file systems on embedded devices.
-
-     - compatible : should contain the specific model of flash chip(s)
-       used, if known, followed by either "cfi-flash" or "jedec-flash"
-     - reg : Address range of the flash chip
-     - bank-width : Width (in bytes) of the flash bank.  Equal to the
-       device width times the number of interleaved chips.
-     - device-width : (optional) Width of a single flash chip.  If
-       omitted, assumed to be equal to 'bank-width'.
-     - #address-cells, #size-cells : Must be present if the flash has
-       sub-nodes representing partitions (see below).  In this case
-       both #address-cells and #size-cells must be equal to 1.
-
-    For JEDEC compatible devices, the following additional properties
-    are defined:
-
-     - vendor-id : Contains the flash chip's vendor id (1 byte).
-     - device-id : Contains the flash chip's device id (1 byte).
-
-    In addition to the information on the flash bank itself, the
-    device tree may optionally contain additional information
-    describing partitions of the flash address space.  This can be
-    used on platforms which have strong conventions about which
-    portions of the flash are used for what purposes, but which don't
-    use an on-flash partition table such as RedBoot.
-
-    Each partition is represented as a sub-node of the flash device.
-    Each node's name represents the name of the corresponding
-    partition of the flash device.
-
-    Flash partitions
-     - reg : The partition's offset and size within the flash bank.
-     - label : (optional) The label / name for this flash partition.
-       If omitted, the label is taken from the node name (excluding
-       the unit address).
-     - read-only : (optional) This parameter, if present, is a hint to
-       Linux that this flash partition should only be mounted
-       read-only.  This is usually used for flash partitions
-       containing early-boot firmware images or data which should not
-       be clobbered.
-
-    Example:
-
-	flash@ff000000 {
-		compatible = "amd,am29lv128ml", "cfi-flash";
-		reg = <ff000000 01000000>;
-		bank-width = <4>;
-		device-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		fs@0 {
-			label = "fs";
-			reg = <0 f80000>;
-		};
-		firmware@f80000 {
-			label ="firmware";
-			reg = <f80000 80000>;
-			read-only;
-		};
-	};
-
-    d) 4xx/Axon EMAC ethernet nodes
+    c) 4xx/Axon EMAC ethernet nodes
 
     The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
     the Axon bridge.  To operate this needs to interact with a ths
@@ -1499,7 +1434,7 @@
 			   available.
 			   For Axon: 0x0000012a
 
-   e) Xilinx IP cores
+   d) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -1761,7 +1696,7 @@
       listed above, nodes for these devices should include a phy-handle
       property, and may include other common network device properties
       like local-mac-address.
-      
+
       iv) Xilinx Uartlite
 
       Xilinx uartlite devices are simple fixed speed serial ports.
@@ -1793,7 +1728,7 @@
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
-    f) USB EHCI controllers
+    e) USB EHCI controllers
 
     Required properties:
       - compatible : should be "usb-ehci".
@@ -1819,7 +1754,7 @@
 		   big-endian;
 	   };
 
-   g) MDIO on GPIOs
+   f) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1839,7 +1774,7 @@
 			 &qe_pio_c 6>;
 	};
 
-    h) SPI (Serial Peripheral Interface) busses
+    g) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index d0ab33e..b6d2e21 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -7,8 +7,10 @@
 
 Recommended properties :
 
- - compatible : Should be "fsl-i2c" for parts compatible with
-   Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+   be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+   should be "fsl-i2c".
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -16,17 +18,31 @@
    controller you have.
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
-   a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
-   uses the FSL 5200 clocking mechanism.
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+   from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
 
-Example :
-	i2c@3000 {
-		interrupt-parent = <40000>;
-		interrupts = <1b 3>;
-		reg = <3000 18>;
-		device_type = "i2c";
-		compatible  = "fsl-i2c";
-		dfsrr;
+Examples :
+
+	i2c@3d00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+		cell-index = <0>;
+		reg = <0x3d00 0x40>;
+		interrupts = <2 15 0>;
+		interrupt-parent = <&mpc5200_pic>;
+		fsl,preserve-clocking;
 	};
+
+	i2c@3100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cell-index = <1>;
+		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+		reg = <0x3100 0x100>;
+		interrupts = <43 2>;
+		interrupt-parent = <&mpic>;
+		clock-frequency = <400000>;
+	};
+
diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
new file mode 100644
index 0000000..667c9bd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -0,0 +1,80 @@
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+   used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+   It's possible to (optionally) define multiple "reg" tuples so that
+   non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip.  If
+   omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+   sub-nodes representing partitions (see below).  In this case
+   both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space.  This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+   If omitted, the label is taken from the node name (excluding
+   the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+   Linux that this flash partition should only be mounted
+   read-only.  This is usually used for flash partitions
+   containing early-boot firmware images or data which should not
+   be clobbered.
+
+Example:
+
+	flash@ff000000 {
+		compatible = "amd,am29lv128ml", "cfi-flash";
+		reg = <ff000000 01000000>;
+		bank-width = <4>;
+		device-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		fs@0 {
+			label = "fs";
+			reg = <0 f80000>;
+		};
+		firmware@f80000 {
+			label ="firmware";
+			reg = <f80000 80000>;
+			read-only;
+		};
+	};
+
+Here an example with multiple "reg" tuples:
+
+	flash@f0000000,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "intel,PC48F4400P0VB", "cfi-flash";
+		reg = <0 0x00000000 0x02000000
+		       0 0x02000000 0x02000000>;
+		bank-width = <2>;
+		partition@0 {
+			label = "test-part1";
+			reg = <0 0x04000000>;
+		};
+	};
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index c5948f2..88b7433 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -169,7 +169,7 @@
 What `model` option values are available depends on the codec chip.
 Check your codec chip from the codec proc file (see "Codec Proc-File"
 section below).  It will show the vendor/product name of your codec
-chip.  Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+chip.  Then, see Documentation/sound/alsa/HD-Audio-Models.txt file,
 the section of HD-audio driver.  You can find a list of codecs
 and `model` options belonging to each codec.  For example, for Realtek
 ALC262 codec chip, pass `model=ultra` for devices that are compatible
@@ -177,7 +177,7 @@
 
 Thus, the first thing you can do for any brand-new, unsupported and
 non-working HD-audio hardware is to check HD-audio codec and several
-different `model` option values.  If you have a luck, some of them
+different `model` option values.  If you have any luck, some of them
 might suit with your device well.
 
 Some codecs such as ALC880 have a special model option `model=test`.
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 0f5122e..4a02d25 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -511,10 +511,16 @@
 	This sets up the device clock rate, SPI mode, and word sizes.
 	Drivers may change the defaults provided by board_info, and then
 	call spi_setup(spi) to invoke this routine.  It may sleep.
+
 	Unless each SPI slave has its own configuration registers, don't
 	change them right away ... otherwise drivers could corrupt I/O
 	that's in progress for other SPI devices.
 
+		** BUG ALERT:  for some reason the first version of
+		** many spi_master drivers seems to get this wrong.
+		** When you code setup(), ASSUME that the controller
+		** is actively processing transfers for another device.
+
     master->transfer(struct spi_device *spi, struct spi_message *message)
     	This must not sleep.  Its responsibility is arrange that the
 	transfer happens and its complete() callback is issued.  The two
diff --git a/MAINTAINERS b/MAINTAINERS
index 0cb20d8..ef03abe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -543,6 +543,14 @@
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:	Orphan
 F:	drivers/mmc/host/mmci.*
@@ -592,6 +600,13 @@
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/CLKDEV SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+F:	arch/arm/common/clkdev.c
+F:	arch/arm/include/asm/clkdev.h
+
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
 P:	Mike Rapoport
 M:	mike@compulab.co.il
@@ -610,6 +625,15 @@
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 
+ARM/EBSA110 MACHINE SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/mach-ebsa110/
+F:	drivers/net/arm/am79c961a.*
+
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
 P:	Daniel Ribeiro
 M:	drwyrm@gmail.com
@@ -627,6 +651,15 @@
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/FOOTBRIDGE ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/include/asm/hardware/dec21285.h
+F:	arch/arm/mach-footbridge/
+
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 P:	Sascha Hauer
 M:	kernel@pengutronix.de
@@ -767,19 +800,27 @@
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/RISCPC ARCHITECTURE
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/common/time-acorn.c
+F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
+F:	arch/arm/include/asm/hardware/ioc.h
+F:	arch/arm/include/asm/hardware/iomd.h
+F:	arch/arm/include/asm/hardware/memc.h
+F:	arch/arm/mach-rpc/
+F:	drivers/net/arm/ether*
+F:	drivers/scsi/arm/
+
 ARM/SHARK MACHINE SUPPORT
 P:	Alexander Schulz
 M:	alex@shark-linux.de
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
-ARM/STRONGARM110 PORT
-P:	Russell King
-M:	rmk@arm.linux.org.uk
-L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
-W:	http://www.arm.linux.org.uk/
-S:	Maintained
-
 ARM/S3C2410 ARM ARCHITECTURE
 P:	Ben Dooks
 M:	ben-linux@fluff.org
@@ -813,6 +854,14 @@
 W:	http://www.mcuos.com
 S:	Maintained
 
+ARM/VFP SUPPORT
+P:	Russell King
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
+W:	http://www.arm.linux.org.uk/
+S:	Maintained
+F:	arch/arm/vfp/
+
 ARPD SUPPORT
 P:	Jonathan Layes
 L:	netdev@vger.kernel.org
@@ -1238,6 +1287,14 @@
 F:	Documentation/video4linux/bttv/
 F:	drivers/media/video/bt8xx/bttv*
 
+CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
+P:	David Howells
+M:	dhowells@redhat.com
+L:	linux-cachefs@redhat.com
+S:	Supported
+F:	Documentation/filesystems/caching/cachefiles.txt
+F:	fs/cachefiles/
+
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
 P:	Jonathan Corbet
 M:	corbet@lwn.net
@@ -1280,12 +1337,9 @@
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
-F:	arch/powerpc/include/asm/lv1call.h
-F:	arch/powerpc/include/asm/ps3*.h
 F:	arch/powerpc/include/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
-F:	arch/powerpc/platforms/ps3/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
 P:	David Vrabel
@@ -1372,6 +1426,11 @@
 F:	Documentation/input/cs461x.txt
 F:	sound/pci/cs46xx/
 
+CLK API
+P:	Russell King
+M:	linux@arm.linux.org.uk
+F:	include/linux/clk.h
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1576,7 +1635,8 @@
 
 CYBERPRO FB DRIVER
 P:	Russell King
-M:	rmk@arm.linux.org.uk
+M:	linux@arm.linux.org.uk
+L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
@@ -2002,6 +2062,8 @@
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
+P:	Matt Mackall
+M:	mpm@selenic.com
 P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
@@ -2270,6 +2332,15 @@
 F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
+FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
+P:	David Howells
+M:	dhowells@redhat.com
+L:	linux-cachefs@redhat.com
+S:	Supported
+F:	Documentation/filesystems/caching/
+F:	fs/fscache/
+F:	include/linux/fscache*.h
+
 FTRACE
 P:	Steven Rostedt
 M:	rostedt@goodmis.org
@@ -2490,7 +2561,6 @@
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend*.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
@@ -2688,7 +2758,7 @@
 P:	Bartlomiej Zolnierkiewicz
 M:	bzolnier@gmail.com
 L:	linux-ide@vger.kernel.org
-T:	quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
 S:	Maintained
 F:	Documentation/ide/
 F:	drivers/ide/
@@ -3268,7 +3338,7 @@
 M:	eduard.munteanu@linux360.ro
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
-F:	Documentation/vm/kmemtrace.txt
+F:	Documentation/trace/kmemtrace.txt
 F:	include/trace/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
@@ -3917,19 +3987,12 @@
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
-NETWORK DEVICE DRIVERS
-P:	Jeff Garzik
-M:	jgarzik@pobox.com
-L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-S:	Maintained
-F:	drivers/net/
-
 NETWORKING [GENERAL]
-P:	Networking Team
-M:	netdev@vger.kernel.org
+P:	David S. Miller
+M:	davem@davemloft.net
 L:	netdev@vger.kernel.org
-W:	http://linux-net.osdl.org/
+W:	http://www.linuxfoundation.org/en/Net
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -3970,6 +4033,13 @@
 F:	include/net/ieee80211*
 F:	include/net/wireless.h
 
+NETWORKING DRIVERS
+L:	netdev@vger.kernel.org
+W:	http://www.linuxfoundation.org/en/Net
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+S:	Odd Fixes
+F:	drivers/net/
+
 NETXEN (1/10) GbE SUPPORT
 P:	Dhananjay Phadke
 M:	dhananjay@netxen.com
@@ -4441,7 +4511,9 @@
 F:	arch/powerpc/platforms/ps3/
 F:	drivers/*/ps3*
 F:	drivers/ps3/
+F:	drivers/rtc/rtc-ps3.c
 F:	drivers/usb/host/*ps3.c
+F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
 P:	Jim Paris
@@ -5187,7 +5259,12 @@
 P:	Takashi Iwai
 M:	tiwai@suse.de
 L:	alsa-devel@alsa-project.org (subscribers-only)
+W:	http://www.alsa-project.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
+F:	Documentation/sound/
+F:	include/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
@@ -5334,7 +5411,6 @@
 F:	include/linux/suspend.h
 F:	include/linux/freezer.h
 F:	include/linux/pm.h
-F:	include/asm-*/suspend.h
 
 SVGA HANDLING
 P:	Martin Mares
@@ -5568,7 +5644,7 @@
 S:	Maintained
 F:	arch/m68knommu/
 
-UCLINUX FOR RENESAS H8/300
+UCLINUX FOR RENESAS H8/300 (H8300)
 P:	Yoshinori Sato
 M:	ysato@users.sourceforge.jp
 W:	http://uclinux-h8.sourceforge.jp/
diff --git a/Makefile b/Makefile
index bfdef56..9e5dc8f 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Temporary Tasmanian Devil
 
 # *DOCUMENTATION*
@@ -1200,7 +1200,7 @@
                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config include2 usr/include
+MRPROPER_DIRS  += include/config include2 usr/include include/generated
 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h      \
                   include/linux/utsrelease.h                            \
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 3495e8e..e9e0bb5 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -73,6 +73,6 @@
 
 #endif /* SMP */
 
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+#include <asm-generic/percpu.h>
 
 #endif /* __ALPHA_PERCPU_H */
diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S
index 7ac1f13..4bdd1d2 100644
--- a/arch/alpha/kernel/head.S
+++ b/arch/alpha/kernel/head.S
@@ -7,10 +7,11 @@
  * the kernel global pointer and jump to the kernel entry-point.
  */
 
+#include <linux/init.h>
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 
-.section .text.head, "ax"
+__HEAD
 .globl swapper_pg_dir
 .globl _stext
 swapper_pg_dir=SWAPPER_PGD
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index ef37fc1..b9d6568 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -16,7 +16,7 @@
 
 	_text = .;	/* Text and read-only data */
 	.text : {
-	*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ecf0bfb..b2a781d 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -85,12 +85,11 @@
 	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 
 	for (i = 0; i < 32; i++) {
-		unsigned int irq = irq_start + i;
-
-		set_irq_chip(irq, &vic_chip);
-		set_irq_chip_data(irq, base);
-
 		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
 			set_irq_handler(irq, handle_level_irq);
 			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 		}
diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig
deleted file mode 100644
index bcd95b8..0000000
--- a/arch/arm/configs/imx27ads_defconfig
+++ /dev/null
@@ -1,826 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:29:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-CONFIG_MACH_MX27ADS=y
-# CONFIG_MACH_PCM038 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_FEC_OLD is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_IMX is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx1_defconfig
similarity index 60%
rename from arch/arm/configs/mx31ads_defconfig
rename to arch/arm/configs/mx1_defconfig
index e052717..0200d67 100644
--- a/arch/arm/configs/mx31ads_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:21:11 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 11:11:33 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,15 +43,24 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -59,26 +68,26 @@
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -88,11 +97,10 @@
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +108,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +125,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +135,10 @@
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,55 +150,55 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_MX1ADS=y
 
 #
 # Freescale MXC Implementations
 #
+CONFIG_ARCH_MX1=y
 # CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MX3 is not set
 
 #
-# MX3 Options
+# MX1 platforms:
 #
-CONFIG_MACH_MX31ADS=y
-# CONFIG_MACH_PCM037 is not set
+CONFIG_MACH_MXLADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MXC_IRQ_PRIOR=y
+# CONFIG_MXC_PWM is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -203,7 +208,7 @@
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_OUTER_CACHE is not set
 
 #
@@ -220,25 +225,32 @@
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -251,30 +263,41 @@
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
 #
 # At least one emulation must be selected
 #
-CONFIG_VFP=y
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -283,11 +306,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -306,12 +324,11 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -324,6 +341,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -333,7 +351,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -344,14 +364,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,16 +380,16 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -399,36 +413,31 @@
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -446,17 +455,15 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -476,23 +483,51 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -502,7 +537,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -542,46 +580,124 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# GPIO Support
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
 
 #
 # SPI GPIO expanders:
 #
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -604,36 +720,131 @@
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# Sound
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_IMX=y
+CONFIG_USB_IMX=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -643,6 +854,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -660,15 +876,13 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -687,25 +901,30 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -724,9 +943,9 @@
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -734,8 +953,31 @@
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -743,15 +985,28 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -766,7 +1021,7 @@
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
 # CONFIG_CRYPTO_ECB is not set
@@ -785,8 +1040,12 @@
 #
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -803,7 +1062,7 @@
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -816,24 +1075,31 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/mx27_defconfig
similarity index 77%
rename from arch/arm/configs/pcm038_defconfig
rename to arch/arm/configs/mx27_defconfig
index 41429a0..083516c 100644
--- a/arch/arm/configs/pcm038_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:38:36 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 10:18:06 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -40,47 +40,58 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -88,11 +99,10 @@
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +110,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +127,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +137,10 @@
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,46 +152,44 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
 #
+# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
 # CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
+# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
 
 #
-# MX2 Platforms
+# MX2 platforms:
 #
-# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 
 #
 # Processor Type
@@ -209,6 +214,7 @@
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -224,25 +230,32 @@
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -255,30 +268,44 @@
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
 #
 # At least one emulation must be selected
 #
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
 # CONFIG_VFP is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -293,7 +320,7 @@
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
@@ -323,6 +350,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -332,26 +360,23 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -366,12 +391,15 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -426,9 +454,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -452,6 +478,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -477,7 +508,7 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -491,12 +522,20 @@
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_FEC_OLD=y
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -505,7 +544,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -541,12 +583,15 @@
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -559,6 +604,7 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -573,42 +619,55 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -622,47 +681,83 @@
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -683,7 +778,7 @@
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=y
 CONFIG_MEDIA_TUNER_TDA8290=y
 CONFIG_MEDIA_TUNER_TDA9887=y
@@ -692,16 +787,17 @@
 CONFIG_MEDIA_TUNER_MT20XX=y
 CONFIG_MEDIA_TUNER_XC2028=y
 CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEO_V4L1=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
 # CONFIG_SOC_CAMERA is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -714,9 +810,10 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -732,8 +829,12 @@
 #
 # Frame buffer hardware drivers
 #
+CONFIG_FB_IMX=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -761,14 +862,29 @@
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -800,42 +916,56 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -844,6 +974,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -861,15 +996,13 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -889,25 +1022,27 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -972,12 +1107,41 @@
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -985,24 +1149,26 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx3_defconfig
similarity index 61%
rename from arch/arm/configs/mx31litekit_defconfig
rename to arch/arm/configs/mx3_defconfig
index 4f41c41..72a8201 100644
--- a/arch/arm/configs/mx31litekit_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,17 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 14:23:39 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr  8 11:06:37 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,9 +22,8 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,11 +43,24 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -55,27 +68,26 @@
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -85,11 +97,10 @@
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -97,12 +108,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -116,7 +125,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -126,11 +135,10 @@
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -142,46 +150,54 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
 #
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
 CONFIG_ARCH_MX3=y
+CONFIG_ARCH_MX31=y
 
 #
-# MX3 Options
+# MX3 platforms:
 #
-# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31ADS=y
+CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_PCM037=y
 CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y
@@ -200,45 +216,50 @@
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
 #
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# PC-card bridges
-#
+# CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -251,33 +272,42 @@
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
 #
 # At least one emulation must be selected
 #
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -286,11 +316,6 @@
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,12 +334,11 @@
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -327,6 +351,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -336,7 +361,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,14 +374,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -369,18 +390,16 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -404,36 +423,31 @@
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -451,18 +465,15 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -476,63 +487,58 @@
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -541,16 +547,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# USB Network Adapters
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -562,43 +562,7 @@
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -609,10 +573,7 @@
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -624,45 +585,132 @@
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-# CONFIG_W1 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=y
+CONFIG_MFD_WM8350_CONFIG_MODE_0=y
+CONFIG_MFD_WM8352_CONFIG_MODE_0=y
+CONFIG_MFD_WM8350_I2C=y
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -673,7 +721,7 @@
 #
 CONFIG_VIDEO_DEV=y
 CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
 CONFIG_VIDEO_MEDIA=y
@@ -682,34 +730,38 @@
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
 CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_MX3=y
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -719,9 +771,10 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -739,131 +792,79 @@
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_FB_MX3=y
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# Miscellaneous USB options
+# MMC/SD/SDIO Card Drivers
 #
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MX3_IPU=y
+CONFIG_MX3_IPU_IRQS=4
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_WM8350=y
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -873,6 +874,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -890,15 +896,13 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -917,25 +921,30 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -954,65 +963,70 @@
 #
 # Kernel hacking
 #
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1027,7 +1041,7 @@
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
 # CONFIG_CRYPTO_ECB is not set
@@ -1046,8 +1060,12 @@
 #
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1064,7 +1082,7 @@
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -1077,24 +1095,31 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
deleted file mode 100644
index 6e37c77..0000000
--- a/arch/arm/configs/pcm037_defconfig
+++ /dev/null
@@ -1,769 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 25 11:52:42 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_PCM037=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 65a583e..2d58b8f 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,9 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul  7 16:59:23 2008
+# Linux kernel version: 2.6.30-rc2
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
@@ -12,6 +12,7 @@
 CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -21,8 +22,7 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -41,11 +41,20 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -54,31 +63,36 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -88,11 +102,11 @@
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,12 +114,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -119,7 +131,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -129,11 +141,10 @@
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -145,26 +156,38 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C24XX_DCLK=y
 CONFIG_CPU_S3C244X=y
-# CONFIG_S3C24XX_PWM is not set
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=128
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C24XX_GPIO_EXTRA128=y
 CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C24XX_ADC=y
 CONFIG_MACH_SMDK=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -174,7 +197,8 @@
 # Boot options
 #
 # CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 
 #
 # Power management
@@ -182,6 +206,8 @@
 # CONFIG_S3C2410_PM_DEBUG is not set
 # CONFIG_S3C2410_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_DEV_HSMMC=y
 
 #
 # S3C2400 Machines
@@ -190,7 +216,6 @@
 CONFIG_CPU_S3C2410_DMA=y
 CONFIG_S3C2410_PM=y
 CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
 CONFIG_SIMTEC_NOR=y
 CONFIG_MACH_BAST_IDE=y
 
@@ -205,7 +230,7 @@
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
 CONFIG_BAST_PC104_IRQ=y
-# CONFIG_MACH_TCT_HAMMER is not set
+CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
 CONFIG_CPU_S3C2412=y
@@ -215,10 +240,11 @@
 #
 # S3C2412 Machines
 #
-# CONFIG_MACH_JIVE is not set
+CONFIG_MACH_JIVE=y
+# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
 CONFIG_MACH_SMDK2413=y
 CONFIG_MACH_S3C2413=y
-# CONFIG_MACH_SMDK2412 is not set
+CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
 CONFIG_S3C2440_DMA=y
@@ -232,7 +258,7 @@
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
 
 #
@@ -286,25 +312,31 @@
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -317,6 +349,11 @@
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -332,6 +369,8 @@
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -346,10 +385,6 @@
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,11 +394,13 @@
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -372,15 +409,16 @@
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
 # CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
@@ -388,8 +426,25 @@
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
 CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=m
@@ -413,12 +468,181 @@
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -428,8 +652,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -451,8 +677,8 @@
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -462,35 +688,26 @@
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -504,7 +721,9 @@
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -513,6 +732,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -545,7 +765,7 @@
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
@@ -566,8 +786,6 @@
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -590,6 +808,7 @@
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_DEBUG is not set
@@ -602,6 +821,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -620,7 +844,7 @@
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -628,32 +852,40 @@
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_93CX6=m
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_PLATFORM=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -699,6 +931,8 @@
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -711,11 +945,13 @@
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_HAVE_PATA_PLATFORM=y
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -731,9 +967,14 @@
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_ENC28J60 is not set
 CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -742,11 +983,14 @@
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
 # CONFIG_NET_POCKET is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 
@@ -755,7 +999,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -778,7 +1025,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -789,7 +1036,7 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -808,20 +1055,88 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 
 #
 # Hardware I/O ports
@@ -831,12 +1146,15 @@
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -877,14 +1195,17 @@
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2412=y
 CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
@@ -892,7 +1213,7 @@
 CONFIG_PPDEV=y
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -901,33 +1222,44 @@
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ELEKTOR is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
 # CONFIG_I2C_PCA_ISA is not set
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -943,6 +1275,7 @@
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_GPIO=m
 # CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
@@ -950,44 +1283,56 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_TLE62X0=m
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# GPIO Support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_DEBUG_GPIO is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -1003,10 +1348,16 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -1022,7 +1373,10 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1043,20 +1397,33 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1065,14 +1432,189 @@
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
-# CONFIG_DAB is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_AU0828=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+# CONFIG_DVB_USB_A800 is not set
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+# CONFIG_DVB_USB_GL861 is not set
+# CONFIG_DVB_USB_AU6610 is not set
+# CONFIG_DVB_USB_DIGITV is not set
+# CONFIG_DVB_USB_VP7045 is not set
+# CONFIG_DVB_USB_VP702X is not set
+# CONFIG_DVB_USB_GP8PSK is not set
+# CONFIG_DVB_USB_NOVA_T_USB2 is not set
+# CONFIG_DVB_USB_TTUSB2 is not set
+# CONFIG_DVB_USB_DTT200U is not set
+# CONFIG_DVB_USB_OPERA1 is not set
+CONFIG_DVB_USB_AF9005=m
+# CONFIG_DVB_USB_AF9005_REMOTE is not set
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
 
 #
 # Graphics support
@@ -1082,6 +1624,7 @@
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1105,7 +1648,19 @@
 # CONFIG_FB_S3C2410_DEBUG is not set
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
 
 #
 # Display device support
@@ -1125,11 +1680,54 @@
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C_I2SV2_SOC=m
+CONFIG_SND_S3C2412_SOC_I2S=m
+CONFIG_SND_S3C2443_SOC_AC97=m
+CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
+CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
+CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
+CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_WM8750=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1139,12 +1737,12 @@
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB HID Boot Protocol drivers
+# Special HID drivers
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_HID_APPLE=m
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1161,19 +1759,26 @@
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_U132_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1181,53 +1786,51 @@
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
 
 #
 # USB port drivers
 #
-# CONFIG_USB_USS720 is not set
+CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
 # CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1251,42 +1854,71 @@
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
 CONFIG_USB_LD=m
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SPI=m
+CONFIG_MMC_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
@@ -1295,7 +1927,14 @@
 #
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2802=m
 
 #
 # LED Triggers
@@ -1304,7 +1943,13 @@
 CONFIG_LEDS_TRIGGER_TIMER=m
 # CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1335,31 +1980,43 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1370,27 +2027,40 @@
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+CONFIG_JBD2=m
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1416,15 +2086,13 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1444,27 +2112,49 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1546,6 +2236,11 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1565,14 +2260,39 @@
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1586,19 +2306,29 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -1630,10 +2360,14 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1663,23 +2397,37 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 857f1df..321c83e 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -36,6 +36,8 @@
 struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
+	unsigned long		range_start;
+	unsigned long		range_end;
 };
 
 DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -63,7 +65,19 @@
 	put_cpu_var(mmu_gathers);
 }
 
-#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+	if (!tlb->fullmm) {
+		if (addr < tlb->range_start)
+			tlb->range_start = addr;
+		if (addr + PAGE_SIZE > tlb->range_end)
+			tlb->range_end = addr + PAGE_SIZE;
+	}
+}
 
 /*
  * In the case of tlb vma handling, we can optimise these away in the
@@ -73,15 +87,18 @@
 static inline void
 tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
+	if (!tlb->fullmm) {
 		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+		tlb->range_start = TASK_SIZE;
+		tlb->range_end = 0;
+	}
 }
 
 static inline void
 tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 {
-	if (!tlb->fullmm)
-		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+	if (!tlb->fullmm && tlb->range_end > 0)
+		flush_tlb_range(vma, tlb->range_start, tlb->range_end);
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0106184..94cc58e 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -387,6 +387,8 @@
 #define __NR_dup3			(__NR_SYSCALL_BASE+358)
 #define __NR_pipe2			(__NR_SYSCALL_BASE+359)
 #define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+#define __NR_preadv			(__NR_SYSCALL_BASE+361)
+#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 9ca8d13..1680e9e 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -370,6 +370,8 @@
 		CALL(sys_dup3)
 		CALL(sys_pipe2)
 /* 360 */	CALL(sys_inotify_init1)
+		CALL(sys_preadv)
+		CALL(sys_pwritev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 42623db..d59a0cd 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -83,6 +83,7 @@
 #include <linux/net.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 struct oldabi_stat64 {
 	unsigned long long st_dev;
@@ -176,21 +177,12 @@
 				   int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-	error = cp_oldabi_stat64(&stat, statbuf);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_oldabi_stat64(&stat, statbuf);
 }
 
 struct oabi_flock64 {
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 1ff1bda..309f351 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -85,7 +85,7 @@
 	.handler	= at91rm9200_timer_interrupt
 };
 
-static cycle_t read_clk32k(void)
+static cycle_t read_clk32k(struct clocksource *cs)
 {
 	return read_CRTR();
 }
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index b63e1d5..4bd56ae 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -31,7 +31,7 @@
  * Clocksource:  just a monotonic counter of MCK/16 cycles.
  * We don't care whether or not PIT irqs are enabled.
  */
-static cycle_t read_pit_clk(void)
+static cycle_t read_pit_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 elapsed;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index f8bcd29..6c227d4 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -238,7 +238,7 @@
 /*
  * clocksource
  */
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
 {
 	struct timer_s *t = &timers[TID_CLOCKSOURCE];
 
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6d9152d..ae24486 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -100,7 +100,7 @@
 
 #define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
 
-static int ep93xx_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
 	__raw_writel(1, EP93XX_TIMER1_CLEAR);
 	while ((signed long)
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
index 502d5aa..6c2942f 100644
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -1,6 +1,7 @@
 #ifndef _IMX_GPIO_H
 
 #include <linux/kernel.h>
+#include <mach/hardware.h>
 #include <mach/imx-regs.h>
 
 #define IMX_GPIO_ALLOC_MODE_NORMAL	0
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index aff0ebc..5aef18b 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -73,7 +73,7 @@
 	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
 }
 
-cycle_t imx_get_cycles(void)
+cycle_t imx_get_cycles(struct clocksource *cs)
 {
 	return IMX_TCN(TIMER_BASE);
 }
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index f4656d2..1e93dfe 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -401,7 +401,7 @@
 /*
  * clocksource
  */
-cycle_t ixp4xx_get_cycles(void)
+cycle_t ixp4xx_get_cycles(struct clocksource *cs)
 {
 	return *IXP4XX_OSTS;
 }
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 16dc9ea..eeb0024 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -23,6 +23,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/mvsdio.h>
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
new file mode 100644
index 0000000..4f7029f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET		0x00000002
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH		0x00000010
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index c0cc5b5..a4a55c1 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
 */
 
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
index 83e0cba..8939d36 100644
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 38c9868..b3e1395 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -44,44 +44,6 @@
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
 /*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   CPU_RESET		0x00000002
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_LOW_OFF	0x0000
-#define   IRQ_MASK_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
-#define   L2_WRITETHROUGH	0x00000010
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID	0x6281
-#define MV88F6281_REV_Z0	0
-#define MV88F6281_REV_A0	2
-
-#define MV88F6192_DEV_ID	0x6192
-#define MV88F6192_REV_Z0	0
-#define MV88F6192_REV_A0	2
-
-#define MV88F6180_DEV_ID	0x6180
-#define MV88F6180_REV_A0	2
-
-/*
  * Register Map
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
@@ -99,6 +61,8 @@
 #define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
@@ -119,5 +83,18 @@
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID	0x6281
+#define MV88F6281_REV_Z0	0
+#define MV88F6281_REV_A0	2
+
+#define MV88F6192_DEV_ID	0x6192
+#define MV88F6192_REV_Z0	0
+#define MV88F6192_REV_A0	2
+
+#define MV88F6180_DEV_ID	0x6180
+#define MV88F6180_REV_A0	2
 
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
index 23a1914..7568e95 100644
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 06083b2..28020ab 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include <asm/gpio.h>
 #include "common.h"
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index 0332d8f..b9537c9 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -38,6 +38,7 @@
 /*
  * CPU Address Decode Windows registers
  */
+#define BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
 #define CPU_WIN_CTRL(n)		BRIDGE_REG(0x000 | ((n) << 4))
 #define CPU_WIN_BASE(n)		BRIDGE_REG(0x004 | ((n) << 4))
 #define CPU_WIN_REMAP_LO(n)	BRIDGE_REG(0x008 | ((n) << 4))
diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h
new file mode 100644
index 0000000..a3fabf7
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/bridge-regs.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-loki/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/loki.h>
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	0x0004
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF		0x0000
+#define IRQ_MASK_OFF		0x0004
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
index 332af38..bc917ed 100644
--- a/arch/arm/mach-loki/include/mach/entry-macro.S
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h
index c00af6b..bfca7c2 100644
--- a/arch/arm/mach-loki/include/mach/loki.h
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -58,20 +58,6 @@
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
 #define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
-#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	0x0004
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_OFF		0x0000
-#define   IRQ_MASK_OFF		0x0004
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
 
 #define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
 
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
index c1de36f..7189519 100644
--- a/arch/arm/mach-loki/include/mach/system.h
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c
index e1f9733..76b211b 100644
--- a/arch/arm/mach-loki/irq.c
+++ b/arch/arm/mach-loki/irq.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 444d9c0..4855b8c 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -57,12 +57,12 @@
 	return IRQ_HANDLED;
 }
 
-static cycle_t msm_gpt_read(void)
+static cycle_t msm_gpt_read(struct clocksource *cs)
 {
 	return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
 }
 
-static cycle_t msm_dgt_read(void)
+static cycle_t msm_dgt_read(struct clocksource *cs)
 {
 	return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
 }
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index a575daa..9ba5950 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -20,6 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/orion_nand.h>
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
new file mode 100644
index 0000000..2d14c4f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/mv78xx0.h>
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH		0x00020000
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_ERR_OFF	0x0000
+#define IRQ_CAUSE_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0008
+#define IRQ_MASK_ERR_OFF	0x000c
+#define IRQ_MASK_LOW_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index fbfb269..66ae2d2 100644
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 582cffc..d715b92 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -59,37 +59,6 @@
  * Core-specific peripheral registers.
  */
 #define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
-#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define   L2_WRITETHROUGH	0x00020000
-#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define   SOFT_RESET_OUT_EN	0x00000004
-#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define   SOFT_RESET		0x00000001
-#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
-#define   BRIDGE_INT_TIMER0	0x0002
-#define   BRIDGE_INT_TIMER1	0x0004
-#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define   IRQ_CAUSE_ERR_OFF	0x0000
-#define   IRQ_CAUSE_LOW_OFF	0x0004
-#define   IRQ_CAUSE_HIGH_OFF	0x0008
-#define   IRQ_MASK_ERR_OFF	0x000c
-#define   IRQ_MASK_LOW_OFF	0x0010
-#define   IRQ_MASK_HIGH_OFF	0x0014
-#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Supported devices and revisions.
- */
-#define MV78X00_Z0_DEV_ID	0x6381
-#define MV78X00_REV_Z0		1
-
-#define MV78100_DEV_ID		0x7810
-#define MV78100_REV_A0		1
-
-#define MV78200_DEV_ID		0x7820
-#define MV78200_REV_A0		1
 
 /*
  * Register Map
@@ -135,5 +104,16 @@
 
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
 
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID	0x6381
+#define MV78X00_REV_Z0		1
+
+#define MV78100_DEV_ID		0x7810
+#define MV78100_REV_A0		1
+
+#define MV78200_DEV_ID		0x7820
+#define MV78200_REV_A0		1
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
index 1d6350b..66e7ce4 100644
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -9,8 +9,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 30b7e4b..f289b0e 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -13,7 +13,7 @@
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <asm/gpio.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 7ae229b..e54057f 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -28,9 +28,7 @@
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
-#ifdef CONFIG_I2C_IMX
 #include <mach/i2c.h>
-#endif
 #include <mach/iomux.h>
 #include "devices.h"
 
@@ -114,7 +112,6 @@
  * I2C
  */
 
-#ifdef CONFIG_I2C_IMX
 static int i2c_pins[] = {
 	PA15_PF_I2C_SDA,
 	PA16_PF_I2C_SCL,
@@ -157,7 +154,6 @@
 		.platform_data = &pcf857x_data[1],
 	},
 };
-#endif
 
 /*
  * Board init
@@ -172,12 +168,10 @@
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
 
 	/* I2C */
-#ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
 	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-#endif
 }
 
 static void __init mx1ads_timer_init(void)
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 2dee5c8..999d013 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -919,19 +919,19 @@
 	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
 	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
 	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
-	_REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
 	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
 	_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
 	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
 	_REGISTER_CLOCK(NULL, "brom", brom_clk)
 	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK(NULL, "owire", owire_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index d623558..194b842 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -19,6 +19,8 @@
 config MACH_MX31ADS_WM1133_EV1
 	bool "Support Wolfson Microelectronics 1133-EV1 module"
 	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8352_CONFIG_MODE_0
 	help
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 83e5e8e..a6d6efe 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -102,7 +102,7 @@
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
@@ -452,6 +452,8 @@
 
 	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
 
+	regulator_has_full_constraints();
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c3648ef..b5227d8 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -226,10 +226,10 @@
 	mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
-	/* SMSC9215 IRQ pin */
+	/* LAN9217 IRQ pin */
 	if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
 				"pcm037-eth"))
-		gpio_direction_input(MX31_PIN_GPIO3_1);
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
 
 #ifdef CONFIG_I2C_IMX
 	i2c_register_board_info(1, pcm037_i2c_devices,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 6c4283c..5a01e48 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -251,32 +251,6 @@
 }
 
 /*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc qong_io_desc[] __initdata = {
-	{
-		.virtual = AIPS1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length = AIPS1_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
-		.virtual = AIPS2_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length = AIPS2_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init qong_map_io(void)
-{
-	mxc_map_io();
-	iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
-}
-
-/*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
@@ -305,7 +279,7 @@
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
-	.map_io         = qong_map_io,
+	.map_io         = mxc_map_io,
 	.init_irq       = mxc_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index f201fdd..82801db 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -104,7 +104,7 @@
 	.handler	= netx_timer_interrupt,
 };
 
-cycle_t netx_get_cycles(void)
+cycle_t netx_get_cycles(struct clocksource *cs)
 {
 	return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
 }
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 41df697..7728126 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -25,7 +25,7 @@
 #define TIMER_CLOCKEVENT 1
 static u32 latch;
 
-static cycle_t ns9360_clocksource_read(void)
+static cycle_t ns9360_clocksource_read(struct clocksource *cs)
 {
 	return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
 }
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 495a32c..4d56408 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -198,7 +198,7 @@
 	.handler	= omap_mpu_timer2_interrupt,
 };
 
-static cycle_t mpu_read(void)
+static cycle_t mpu_read(struct clocksource *cs)
 {
 	return ~omap_mpu_timer_read(1);
 }
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 9fc13a2..1cb2c09 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -138,7 +138,7 @@
  * clocksource
  */
 static struct omap_dm_timer *gpt_clocksource;
-static cycle_t clocksource_read_cycles(void)
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
 	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
 }
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 719957e..c14d121 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -57,12 +57,14 @@
 /*
  * Helpers to get DDR bank info
  */
+#define ORION5X_DDR_REG(x)	(ORION5X_DDR_VIRT_BASE | (x))
 #define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) << 3))
 #define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) << 3))
 
 /*
  * CPU Address Decode Windows registers
  */
+#define ORION5X_BRIDGE_REG(x)	(ORION5X_BRIDGE_VIRT_BASE | (x))
 #define CPU_WIN_CTRL(n)		ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
 #define CPU_WIN_BASE(n)		ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
 #define CPU_WIN_REMAP_LO(n)	ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
new file mode 100644
index 0000000..be896e5
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/bridge-regs.h
+ *
+ * Orion CPU Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/orion5x.h>
+
+#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE | 0x100)
+
+#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
+
+#define CPU_RESET_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET		0x0002
+
+#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+
+#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+
+#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define WDT_INT_REQ		0x0008
+
+#define BRIDGE_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x114)
+#define BRIDGE_INT_TIMER0	0x0002
+#define BRIDGE_INT_TIMER1	0x0004
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x200)
+
+#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
+
+#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
index 4351937..d658992 100644
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 
 	.macro  disable_fiq
 	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 67bda31..377a773 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -61,6 +61,59 @@
 #define ORION5X_PCI_MEM_SIZE		SZ_128M
 
 /*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
+
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
+
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
+#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
+
+/*******************************************************************************
  * Supported Devices & Revisions
  ******************************************************************************/
 /* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
@@ -80,85 +133,4 @@
 #define MV88F6183_DEV_ID	0x6183
 #define MV88F6183_REV_B0	3
 
-/*******************************************************************************
- * Orion Registers Map
- ******************************************************************************/
-#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
-
-#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
-#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
-
-#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
-#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
-#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
-
-#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
-
-#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
-
-#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
-#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
-#define ORION5X_XOR_REG(x)		(ORION5X_XOR_VIRT_BASE | (x))
-
-#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
-
-#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
-
-#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
-
-/*******************************************************************************
- * Device Bus Registers
- ******************************************************************************/
-#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
-#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
-
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
-#define  WDT_RESET		0x0002
-#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
-#define  WDT_INT_REQ		0x0008
-#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
-#define  BRIDGE_INT_TIMER0	0x0002
-#define  BRIDGE_INT_TIMER1	0x0004
-#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
-#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
-
-
 #endif
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 9b8db1d..e912490 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -11,8 +11,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 
 static inline void arch_idle(void)
 {
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e03f7b4..d7512b9 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/gpio.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 68acca9..41e6d50 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -26,6 +26,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index d0a785a..36dc541 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -196,6 +196,7 @@
 /*****************************************************************************
  * PCI controller
  ****************************************************************************/
+#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE | (x))
 #define PCI_MODE		ORION5X_PCI_REG(0xd00)
 #define PCI_CMD			ORION5X_PCI_REG(0xc00)
 #define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 67611da..bc0f73f 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -28,7 +28,6 @@
 #include <linux/spi/libertas_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
-#include <linux/delay.h>
 
 #include <media/soc_camera.h>
 
@@ -644,8 +643,9 @@
 };
 
 static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
-	.rx_threshold = 1,
-	.tx_threshold = 1,
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.gpio_cs	= -1,
 };
 
 static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 3465268..485fede 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -15,6 +15,9 @@
 extern void __init pxa_init_irq(int irq_nr,
 				int (*set_wake)(unsigned int, unsigned int));
 extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index f82f96d..16eb025 100644
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -4,12 +4,22 @@
 #include <sound/core.h>
 #include <sound/pcm.h>
 
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ *              a -1 value means no gpio will be used for reset
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
 typedef struct {
 	int (*startup)(struct snd_pcm_substream *, void *);
 	void (*shutdown)(struct snd_pcm_substream *, void *);
 	void (*suspend)(void *);
 	void (*resume)(void *);
 	void *priv;
+	int reset_gpio;
 } pxa2xx_audio_ops_t;
 
 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 90230c6..a88d7ca 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -10,13 +10,13 @@
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
 #else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
 #endif
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 extern void colibri_pxa3xx_init_lcd(int bl_pin);
 #else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 #endif
 
 #if defined(CONFIG_AX88796)
diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
index 6c4b1f7..58afb30 100644
--- a/arch/arm/mach-pxa/include/mach/palmasoc.h
+++ b/arch/arm/mach-pxa/include/mach/palmasoc.h
@@ -1,13 +1,8 @@
 #ifndef _INCLUDE_PALMASOC_H_
 #define _INCLUDE_PALMASOC_H_
+
 struct palm27x_asoc_info {
 	int	jack_gpio;
 };
 
-#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
-#else
-static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
-#endif
-
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 052bfe7..d15662a 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -37,7 +37,6 @@
 
 /* USB */
 #define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_POWER		95
 #define GPIO_NR_PALMT5_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 9f7d62f..e74082c 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -38,7 +38,6 @@
 
 /* USB */
 #define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_POWER		95
 #define GPIO_NR_PALMTX_USB_PULLUP		93
 
 /* LCD/BACKLIGHT */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 9203b06..ff8052c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -742,6 +742,10 @@
 	.fast_mode = 1,
 };
 
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+	.reset_gpio = 95,
+};
+
 /*
  * Mio global
  */
@@ -815,7 +819,7 @@
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
 	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ecf5910..1cec180 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -477,10 +477,22 @@
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmld_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmld_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmld_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmld_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -544,6 +556,7 @@
 	&palmld_backlight,
 	&palmld_leds,
 	&power_supply,
+	&palmld_asoc,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
@@ -573,11 +586,10 @@
 
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmld_ac97_pdata);
 	pxa_set_ficp_info(&palmld_ficp_platform_data);
 	pxa_set_keypad_info(&palmld_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 0680f1a..3066236 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -64,6 +64,7 @@
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -72,7 +73,7 @@
 
 	/* USB */
 	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* MATRIX KEYPAD */
 	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
@@ -344,7 +345,7 @@
 static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMT5_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -419,10 +420,22 @@
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmt5_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
 };
 
+static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmt5_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmt5_asoc_pdata,
+	},
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -485,14 +498,15 @@
 #endif
 	&palmt5_backlight,
 	&power_supply,
+	&palmt5_asoc,
 };
 
 /* setup udc GPIOs initial state */
 static void __init palmt5_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMT5_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
 	}
 }
 
@@ -503,12 +517,11 @@
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
 	palmt5_udc_init();
+	pxa_set_ac97_info(&palmt5_ac97_pdata);
 	pxa_set_udc_info(&palmt5_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmt5_ficp_platform_data);
 	pxa_set_keypad_info(&palmt5_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-	palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 59d0c1c..e2d44b1 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -40,6 +40,7 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -64,6 +65,7 @@
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO40_GPIO,	/* ir disable */
@@ -75,7 +77,7 @@
 
 	/* USB */
 	GPIO13_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb power */
+	GPIO93_GPIO,	/* usb power */
 
 	/* PCMCIA */
 	GPIO48_nPOE,
@@ -359,7 +361,7 @@
 static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
 	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTX_USB_POWER,
+	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
 	.gpio_pullup_inverted	= 0,
 };
 
@@ -433,6 +435,25 @@
 };
 
 /******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmtx_asoc_pdata = {
+	.jack_gpio	= GPIO_NR_PALMTX_EARPHONE_DETECT,
+};
+
+static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct platform_device palmtx_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palmtx_asoc_pdata,
+	},
+};
+
+/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 static struct pxafb_mode_info palmtx_lcd_modes[] = {
@@ -494,6 +515,7 @@
 #endif
 	&palmtx_backlight,
 	&power_supply,
+	&palmtx_asoc,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -514,9 +536,9 @@
 /* setup udc GPIOs initial state */
 static void __init palmtx_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
-		gpio_free(GPIO_NR_PALMTX_USB_POWER);
+	if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
 	}
 }
 
@@ -528,8 +550,8 @@
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
 	palmtx_udc_init();
+	pxa_set_ac97_info(&palmtx_ac97_pdata);
 	pxa_set_udc_info(&palmtx_udc_info);
-	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmtx_ficp_platform_data);
 	pxa_set_keypad_info(&palmtx_keypad_platform_data);
 	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6112740..6c12b5a 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -377,7 +377,7 @@
 #include <linux/i2c/pca953x.h>
 
 static struct pca953x_platform_data pca9536_data = {
-	.gpio_base	= NR_BUILTIN_GPIO + 1,
+	.gpio_base	= NR_BUILTIN_GPIO,
 };
 
 static int gpio_bus_switch;
@@ -405,9 +405,9 @@
 	int ret;
 
 	if (!gpio_bus_switch) {
-		ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
+		ret = gpio_request(NR_BUILTIN_GPIO, "camera");
 		if (!ret) {
-			gpio_bus_switch = NR_BUILTIN_GPIO + 1;
+			gpio_bus_switch = NR_BUILTIN_GPIO;
 			gpio_direction_output(gpio_bus_switch, 0);
 		} else
 			gpio_bus_switch = -EINVAL;
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 8eb3830..750c448 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -125,7 +125,7 @@
 	.set_mode	= pxa_osmr0_set_mode,
 };
 
-static cycle_t pxa_read_oscr(void)
+static cycle_t pxa_read_oscr(struct clocksource *cs)
 {
 	return OSCR;
 }
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ab947c..942e1a7 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -715,7 +715,7 @@
 	.handler	= realview_timer_interrupt,
 };
 
-static cycle_t realview_get_cycles(void)
+static cycle_t realview_get_cycles(struct clocksource *cs)
 {
 	return ~readl(timer3_va_base + TIMER_VALUE);
 }
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 332bd32..8f0d37d 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -52,7 +52,6 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/udc.h>
-#include <plat/iic.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };
@@ -278,7 +277,7 @@
 #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
 #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
 
-struct s3c2410fb_display jive_vgg2432a4_display[] = {
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
 	[0] = {
 		.width		= LCD_XRES,
 		.height		= LCD_YRES,
@@ -311,7 +310,7 @@
 #define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
 #define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
 
-struct s3c2410fb_mach_info jive_lcd_config = {
+static struct s3c2410fb_mach_info jive_lcd_config = {
 	.displays	 = jive_vgg2432a4_display,
 	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
 	.default_display = 0,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index b05d56e..9c6abf9 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -243,7 +243,7 @@
 
 /* IDE channels */
 
-struct pata_platform_info anubis_ide_platdata = {
+static struct pata_platform_info anubis_ide_platdata = {
 	.ioport_shift	= 5,
 };
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 41a00f5..c8a4668 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -413,7 +413,6 @@
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= osiris_map_io,
-	.init_machine	= osiris_init,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 25f7935..7f473e4 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -166,6 +166,10 @@
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	gpio_request(S3C64XX_GPN(5), "LCD power");
+	gpio_request(S3C64XX_GPF(13), "LCD power");
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 5657766..1f929c3 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -948,7 +948,7 @@
 	.handler	= versatile_timer_interrupt,
 };
 
-static cycle_t versatile_get_cycles(void)
+static cycle_t versatile_get_cycles(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
index 83fb72c4..599217b 100644
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -27,6 +27,4 @@
 	unsigned int flags;
 };
 
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
-
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index ab838cf..57e927a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -518,6 +518,8 @@
  */
 #define MX31_PIN_CSPI3_MOSI__RXD3	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI3_MISO__TXD3	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SCLK__RTS3	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SPI_RDY__CTS3	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
@@ -558,6 +560,16 @@
 #define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_LD0__LD0		IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LD1__LD1		IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LD2__LD2		IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
@@ -585,6 +597,42 @@
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3    IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4    IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5    IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6    IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7    IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK        IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index c02b8fc..518a365 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -45,7 +45,7 @@
 
 #define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
-extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
+extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 /* all normal IRQs can be FIQs */
 #define FIQ_START	0
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index e8c4cf5..8b070a0 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -54,9 +54,6 @@
 
 #define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(6*32 + 16)
-
 /* fixed interrupt numbers */
 #define MXC_INT_USBCTRL         58
 #define MXC_INT_USBCTRL         58
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 6e7578a..0fb68a5 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -50,23 +50,27 @@
 #define IIM_PROD_REV_SH		3
 #define IIM_PROD_REV_LEN	5
 
-#ifdef CONFIG_MXC_IRQ_PRIOR
-void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
+#ifdef CONFIG_MXC_IRQ_PRIOR
 	unsigned int temp;
 	unsigned int mask = 0x0F << irq % 8 * 4;
 
-	if (irq > 63)
-		return;
+	if (irq >= MXC_INTERNAL_IRQS)
+		return -EINVAL;;
 
 	temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
 	temp &= ~mask;
 	temp |= prio & mask;
 
 	__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+
+	return 0;
+#else
+	return -ENOSYS;
+#endif
 }
 EXPORT_SYMBOL(imx_irq_set_priority);
-#endif
 
 #ifdef CONFIG_FIQ
 int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index ef1b3cd..dab3357 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -36,7 +36,7 @@
 
 /* clock source */
 
-static cycle_t mxc_get_cycles(void)
+static cycle_t mxc_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(TIMER_BASE + MXC_TCN);
 }
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index d179714..433021f 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -185,7 +185,7 @@
 
 #include <linux/clocksource.h>
 
-static cycle_t omap_32k_read(void)
+static cycle_t omap_32k_read(struct clocksource *cs)
 {
 	return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
@@ -207,7 +207,7 @@
 {
 	unsigned long long ret;
 
-	ret = (unsigned long long)omap_32k_read();
+	ret = (unsigned long long)omap_32k_read(&clocksource_32k);
 	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
 	return ret;
 }
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 6fa2923..de8a001 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
 
 /*
  * Number of timer ticks per jiffy.
@@ -41,7 +41,7 @@
 /*
  * Clocksource handling.
  */
-static cycle_t orion_clksrc_read(void)
+static cycle_t orion_clksrc_read(struct clocksource *cs)
 {
 	return 0xffffffff - readl(TIMER0_VAL);
 }
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
index 7642b97..08044de 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -13,6 +13,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
 
@@ -38,6 +39,7 @@
 
 	return ret;
 }
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
 
 int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
 {
@@ -56,6 +58,7 @@
 
 	return ret;
 }
+EXPORT_SYMBOL(s3c_gpio_setpull);
 
 #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
 int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 6b1b523..26f0cec 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -34,6 +34,7 @@
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 9a5c767..91adfa7 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -100,7 +100,7 @@
 		readl(adc->regs + S3C2410_ADCDLY));
 }
 
-void s3c_adc_try(struct adc_device *adc)
+static void s3c_adc_try(struct adc_device *adc)
 {
 	struct s3c_adc_client *next = adc->ts_pend;
 
@@ -190,6 +190,23 @@
 void s3c_adc_release(struct s3c_adc_client *client)
 {
 	/* We should really check that nothing is in progress. */
+	if (adc_dev->cur == client)
+		adc_dev->cur = NULL;
+	if (adc_dev->ts_pend == client)
+		adc_dev->ts_pend = NULL;
+	else {
+		struct list_head *p, *n;
+		struct s3c_adc_client *tmp;
+
+		list_for_each_safe(p, n, &adc_pending) {
+			tmp = list_entry(p, struct s3c_adc_client, pend);
+			if (tmp == client)
+				list_del(&tmp->pend);
+		}
+	}
+
+	if (adc_dev->cur == NULL)
+		s3c_adc_try(adc_dev);
 	kfree(client);
 }
 EXPORT_SYMBOL_GPL(s3c_adc_release);
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 94a341a..5c0491b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,7 +19,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 0ff46bf..f27aa3b 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -18,7 +18,7 @@
 #include <mach/pm.h>
 
 
-static cycle_t read_cycle_count(void)
+static cycle_t read_cycle_count(struct clocksource *cs)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 0ed2bad..2764612 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -58,16 +58,11 @@
 	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
 }
 
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
 {
 	return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
 }
 
-unsigned long long sched_clock(void)
-{
-	return cycles_2_ns(read_cycles());
-}
-
 static struct clocksource clocksource_bfin = {
 	.name		= "bfin_cycles",
 	.rating		= 350,
@@ -77,6 +72,11 @@
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+unsigned long long sched_clock(void)
+{
+	return cycles_2_ns(read_cycles(&clocksource_bfin));
+}
+
 static int __init bfin_clocksource_init(void)
 {
 	set_cyc2ns_scale(get_cclk() / 1000);
diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h
index 6b1b44d..2e05450 100644
--- a/arch/frv/include/asm/bug.h
+++ b/arch/frv/include/asm/bug.h
@@ -30,7 +30,7 @@
 do {						\
 	__debug_bug_trap(signr);		\
 	asm volatile("nop");			\
-} while(0)
+} while(1)
 
 #define HAVE_ARCH_BUG
 #define BUG()					\
@@ -46,7 +46,8 @@
 #define HAVE_ARCH_KGDB_BAD_PAGE
 #define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
 #endif
-#endif
+
+#endif /* CONFIG_BUG */
 
 #include <asm-generic/bug.h>
 
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index edcfaf5..96d78d5 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -339,10 +339,12 @@
 #define __NR_dup3		330
 #define __NR_pipe2		331
 #define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 333
+#define NR_syscalls 335
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 99060ab..1da523b 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1525,5 +1525,7 @@
 	.long sys_dup3			/* 330 */
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S
index fecf751..b825ef3 100644
--- a/arch/frv/kernel/head.S
+++ b/arch/frv/kernel/head.S
@@ -9,6 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
@@ -27,7 +28,7 @@
 #   command line string
 #
 ###############################################################################
-	.section	.text.head,"ax"
+	__HEAD
 	.balign		4
 
 	.globl		_boot, __head_reference
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index 0669e13..55e4fab 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 
 #ifdef CONFIG_BLK_DEV_INITRD
-#include <linux/blk.h>
 #include <asm/pgtable.h>
 #endif
 
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index b95c4ea..22d9787 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -26,7 +26,7 @@
 
   _sinittext = .;
   .init.text : {
-	*(.text.head)
+	HEAD_TEXT
 #ifndef CONFIG_DEBUG_INFO
 	INIT_TEXT
 	EXIT_TEXT
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index 0f41c3a..c0dcec6 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -31,6 +31,29 @@
 struct pci_ops *__nongpreldata pci_root_ops;
 
 /*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+	.name	= "PCI IO",
+	.start	= 0,
+	.end	= IO_SPACE_LIMIT,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+	.name	= "PCI mem",
+	.start	= 0,
+	.end	= -1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/*
  * Functions for accessing PCI configuration space
  */
 
@@ -304,6 +327,12 @@
 #if 0
 	printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
 #endif
+
+	if (bus->number == 0) {
+		bus->resource[0] = &pci_ioport_resource;
+		bus->resource[1] = &pci_iomem_resource;
+	}
+
 	pci_read_bridge_bases(bus);
 
 	if (bus->number == 0) {
@@ -350,28 +379,36 @@
 	/* enable PCI arbitration */
 	__reg_MB86943_pci_arbiter	= MB86943_PCIARB_EN;
 
-	ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
-	ioport_resource.end	= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
-	ioport_resource.end	+= ioport_resource.start;
+	pci_ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+	pci_ioport_resource.end		= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+	pci_ioport_resource.end		+= pci_ioport_resource.start;
 
 	printk("PCI IO window:  %08llx-%08llx\n",
-	       (unsigned long long) ioport_resource.start,
-	       (unsigned long long) ioport_resource.end);
+	       (unsigned long long) pci_ioport_resource.start,
+	       (unsigned long long) pci_ioport_resource.end);
 
-	iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+	pci_iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+	pci_iomem_resource.end		= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+	pci_iomem_resource.end		+= pci_iomem_resource.start;
 
-	/* Reserve somewhere to write to flush posted writes. */
-	iomem_resource.start += 0x400;
-
-	iomem_resource.end	= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
-	iomem_resource.end	+= iomem_resource.start;
+	/* Reserve somewhere to write to flush posted writes.  This is used by
+	 * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
+	 * CPU-PCI bridge to flush as this doesn't happen automatically when a
+	 * read is performed on the MB93090 development kit motherboard.
+	 */
+	pci_iomem_resource.start	+= 0x400;
 
 	printk("PCI MEM window: %08llx-%08llx\n",
-	       (unsigned long long) iomem_resource.start,
-	       (unsigned long long) iomem_resource.end);
+	       (unsigned long long) pci_iomem_resource.start,
+	       (unsigned long long) pci_iomem_resource.end);
 	printk("PCI DMA memory: %08lx-%08lx\n",
 	       dma_coherent_mem_start, dma_coherent_mem_end);
 
+	if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+		panic("Unable to insert PCI IOMEM resource\n");
+	if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+		panic("Unable to insert PCI IOPORT resource\n");
+
 	if (!pci_probe)
 		return -ENXIO;
 
diff --git a/include/asm-h8300/timer.h b/arch/h8300/include/asm/timer.h
similarity index 100%
rename from include/asm-h8300/timer.h
rename to arch/h8300/include/asm/timer.h
diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
index 3d29511..8f6cb11 100644
--- a/arch/ia64/include/asm/paravirt_privop.h
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -445,7 +445,6 @@
 		register unsigned long ia64_intri_res asm ("r8");	\
 		register unsigned long __reg asm ("r8") = (reg);	\
 									\
-		BUILD_BUG_ON(!__builtin_constant_p(reg));		\
 		asm volatile (paravirt_alt_bundle(__PARAVIRT_BR,	\
 						  PARAVIRT_TYPE(GETREG) \
 						  + (reg))		\
@@ -464,7 +463,6 @@
 		register unsigned long ia64_clobber1 asm ("r8");	\
 		register unsigned long ia64_clobber2 asm ("r9");	\
 									\
-		BUILD_BUG_ON(!__builtin_constant_p(reg));		\
 		asm volatile (paravirt_alt_bundle(__PARAVIRT_BR,	\
 						  PARAVIRT_TYPE(SETREG) \
 						  + (reg))		\
diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h
index 5984083..d217d1d 100644
--- a/arch/ia64/include/asm/smp.h
+++ b/arch/ia64/include/asm/smp.h
@@ -58,7 +58,7 @@
 extern char no_int_routing __devinitdata;
 
 extern cpumask_t cpu_core_map[NR_CPUS];
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
 extern int smp_num_siblings;
 extern void __iomem *ipi_base_addr;
 extern unsigned char smp_int_redirect;
diff --git a/arch/ia64/kernel/cyclone.c b/arch/ia64/kernel/cyclone.c
index 790ef0d8..71e3586 100644
--- a/arch/ia64/kernel/cyclone.c
+++ b/arch/ia64/kernel/cyclone.c
@@ -21,7 +21,7 @@
 
 static void __iomem *cyclone_mc;
 
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
 {
 	return (cycle_t)readq((void __iomem *)cyclone_mc);
 }
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 2ea4199..5230eaa 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -225,6 +225,7 @@
 {
 	platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
 }
+EXPORT_SYMBOL_GPL(smp_send_reschedule);
 
 /*
  * Called with preemption disabled.
@@ -300,15 +301,12 @@
 		return;
 	}
 
+	smp_call_function_mask(mm->cpu_vm_mask,
+		(void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
+	local_irq_disable();
+	local_finish_flush_tlb_mm(mm);
+	local_irq_enable();
 	preempt_enable();
-	/*
-	 * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
-	 * have been running in the address space.  It's not clear that this is worth the
-	 * trouble though: to avoid races, we have to raise the IPI on the target CPU
-	 * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
-	 * rather trivial.
-	 */
-	on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 641c8b6..604c1a3 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -33,7 +33,7 @@
 
 #include "fsyscall_gtod_data.h"
 
-static cycle_t itc_get_cycles(void);
+static cycle_t itc_get_cycles(struct clocksource *cs);
 
 struct fsyscall_gtod_data_t fsyscall_gtod_data = {
 	.lock = SEQLOCK_UNLOCKED,
@@ -383,7 +383,7 @@
 	}
 }
 
-static cycle_t itc_get_cycles(void)
+static cycle_t itc_get_cycles(struct clocksource *cs)
 {
 	u64 lcycle, now, ret;
 
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 28af6a7..d20a5db 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -610,20 +610,22 @@
 	int r;
 
 again:
-	preempt_disable();
-	local_irq_disable();
-
 	if (signal_pending(current)) {
-		local_irq_enable();
-		preempt_enable();
 		r = -EINTR;
 		kvm_run->exit_reason = KVM_EXIT_INTR;
 		goto out;
 	}
 
+	/*
+	 * down_read() may sleep and return with interrupts enabled
+	 */
+	down_read(&vcpu->kvm->slots_lock);
+
+	preempt_disable();
+	local_irq_disable();
+
 	vcpu->guest_mode = 1;
 	kvm_guest_enter();
-	down_read(&vcpu->kvm->slots_lock);
 	r = vti_vcpu_run(vcpu, kvm_run);
 	if (r < 0) {
 		local_irq_enable();
diff --git a/arch/ia64/sn/kernel/sn2/timer.c b/arch/ia64/sn/kernel/sn2/timer.c
index cf67fc5..21d6f09 100644
--- a/arch/ia64/sn/kernel/sn2/timer.c
+++ b/arch/ia64/sn/kernel/sn2/timer.c
@@ -23,7 +23,7 @@
 
 extern unsigned long sn_rtc_cycles_per_second;
 
-static cycle_t read_sn2(void)
+static cycle_t read_sn2(struct clocksource *cs)
 {
 	return (cycle_t)readq(RTC_COUNTER_ADDR);
 }
diff --git a/include/asm-m32r/Kbuild b/arch/m32r/include/asm/Kbuild
similarity index 100%
rename from include/asm-m32r/Kbuild
rename to arch/m32r/include/asm/Kbuild
diff --git a/include/asm-m32r/addrspace.h b/arch/m32r/include/asm/addrspace.h
similarity index 100%
rename from include/asm-m32r/addrspace.h
rename to arch/m32r/include/asm/addrspace.h
diff --git a/include/asm-m32r/assembler.h b/arch/m32r/include/asm/assembler.h
similarity index 100%
rename from include/asm-m32r/assembler.h
rename to arch/m32r/include/asm/assembler.h
diff --git a/include/asm-m32r/atomic.h b/arch/m32r/include/asm/atomic.h
similarity index 100%
rename from include/asm-m32r/atomic.h
rename to arch/m32r/include/asm/atomic.h
diff --git a/include/asm-m32r/auxvec.h b/arch/m32r/include/asm/auxvec.h
similarity index 100%
rename from include/asm-m32r/auxvec.h
rename to arch/m32r/include/asm/auxvec.h
diff --git a/include/asm-m32r/bitops.h b/arch/m32r/include/asm/bitops.h
similarity index 100%
rename from include/asm-m32r/bitops.h
rename to arch/m32r/include/asm/bitops.h
diff --git a/include/asm-m32r/bug.h b/arch/m32r/include/asm/bug.h
similarity index 100%
rename from include/asm-m32r/bug.h
rename to arch/m32r/include/asm/bug.h
diff --git a/include/asm-m32r/bugs.h b/arch/m32r/include/asm/bugs.h
similarity index 100%
rename from include/asm-m32r/bugs.h
rename to arch/m32r/include/asm/bugs.h
diff --git a/include/asm-m32r/byteorder.h b/arch/m32r/include/asm/byteorder.h
similarity index 100%
rename from include/asm-m32r/byteorder.h
rename to arch/m32r/include/asm/byteorder.h
diff --git a/include/asm-m32r/cache.h b/arch/m32r/include/asm/cache.h
similarity index 100%
rename from include/asm-m32r/cache.h
rename to arch/m32r/include/asm/cache.h
diff --git a/include/asm-m32r/cachectl.h b/arch/m32r/include/asm/cachectl.h
similarity index 100%
rename from include/asm-m32r/cachectl.h
rename to arch/m32r/include/asm/cachectl.h
diff --git a/include/asm-m32r/cacheflush.h b/arch/m32r/include/asm/cacheflush.h
similarity index 100%
rename from include/asm-m32r/cacheflush.h
rename to arch/m32r/include/asm/cacheflush.h
diff --git a/include/asm-m32r/checksum.h b/arch/m32r/include/asm/checksum.h
similarity index 100%
rename from include/asm-m32r/checksum.h
rename to arch/m32r/include/asm/checksum.h
diff --git a/include/asm-m32r/cputime.h b/arch/m32r/include/asm/cputime.h
similarity index 100%
rename from include/asm-m32r/cputime.h
rename to arch/m32r/include/asm/cputime.h
diff --git a/include/asm-m32r/current.h b/arch/m32r/include/asm/current.h
similarity index 100%
rename from include/asm-m32r/current.h
rename to arch/m32r/include/asm/current.h
diff --git a/include/asm-m32r/delay.h b/arch/m32r/include/asm/delay.h
similarity index 100%
rename from include/asm-m32r/delay.h
rename to arch/m32r/include/asm/delay.h
diff --git a/include/asm-m32r/device.h b/arch/m32r/include/asm/device.h
similarity index 100%
rename from include/asm-m32r/device.h
rename to arch/m32r/include/asm/device.h
diff --git a/include/asm-m32r/div64.h b/arch/m32r/include/asm/div64.h
similarity index 100%
rename from include/asm-m32r/div64.h
rename to arch/m32r/include/asm/div64.h
diff --git a/include/asm-m32r/dma.h b/arch/m32r/include/asm/dma.h
similarity index 100%
rename from include/asm-m32r/dma.h
rename to arch/m32r/include/asm/dma.h
diff --git a/include/asm-m32r/elf.h b/arch/m32r/include/asm/elf.h
similarity index 100%
rename from include/asm-m32r/elf.h
rename to arch/m32r/include/asm/elf.h
diff --git a/include/asm-m32r/emergency-restart.h b/arch/m32r/include/asm/emergency-restart.h
similarity index 100%
rename from include/asm-m32r/emergency-restart.h
rename to arch/m32r/include/asm/emergency-restart.h
diff --git a/include/asm-m32r/errno.h b/arch/m32r/include/asm/errno.h
similarity index 100%
rename from include/asm-m32r/errno.h
rename to arch/m32r/include/asm/errno.h
diff --git a/include/asm-m32r/fb.h b/arch/m32r/include/asm/fb.h
similarity index 100%
rename from include/asm-m32r/fb.h
rename to arch/m32r/include/asm/fb.h
diff --git a/include/asm-m32r/fcntl.h b/arch/m32r/include/asm/fcntl.h
similarity index 100%
rename from include/asm-m32r/fcntl.h
rename to arch/m32r/include/asm/fcntl.h
diff --git a/include/asm-m32r/flat.h b/arch/m32r/include/asm/flat.h
similarity index 100%
rename from include/asm-m32r/flat.h
rename to arch/m32r/include/asm/flat.h
diff --git a/include/asm-m32r/ftrace.h b/arch/m32r/include/asm/ftrace.h
similarity index 100%
rename from include/asm-m32r/ftrace.h
rename to arch/m32r/include/asm/ftrace.h
diff --git a/include/asm-m32r/futex.h b/arch/m32r/include/asm/futex.h
similarity index 100%
rename from include/asm-m32r/futex.h
rename to arch/m32r/include/asm/futex.h
diff --git a/include/asm-m32r/hardirq.h b/arch/m32r/include/asm/hardirq.h
similarity index 100%
rename from include/asm-m32r/hardirq.h
rename to arch/m32r/include/asm/hardirq.h
diff --git a/include/asm-m32r/hw_irq.h b/arch/m32r/include/asm/hw_irq.h
similarity index 100%
rename from include/asm-m32r/hw_irq.h
rename to arch/m32r/include/asm/hw_irq.h
diff --git a/include/asm-m32r/io.h b/arch/m32r/include/asm/io.h
similarity index 100%
rename from include/asm-m32r/io.h
rename to arch/m32r/include/asm/io.h
diff --git a/include/asm-m32r/ioctl.h b/arch/m32r/include/asm/ioctl.h
similarity index 100%
rename from include/asm-m32r/ioctl.h
rename to arch/m32r/include/asm/ioctl.h
diff --git a/include/asm-m32r/ioctls.h b/arch/m32r/include/asm/ioctls.h
similarity index 100%
rename from include/asm-m32r/ioctls.h
rename to arch/m32r/include/asm/ioctls.h
diff --git a/include/asm-m32r/ipcbuf.h b/arch/m32r/include/asm/ipcbuf.h
similarity index 100%
rename from include/asm-m32r/ipcbuf.h
rename to arch/m32r/include/asm/ipcbuf.h
diff --git a/include/asm-m32r/irq.h b/arch/m32r/include/asm/irq.h
similarity index 100%
rename from include/asm-m32r/irq.h
rename to arch/m32r/include/asm/irq.h
diff --git a/include/asm-m32r/irq_regs.h b/arch/m32r/include/asm/irq_regs.h
similarity index 100%
rename from include/asm-m32r/irq_regs.h
rename to arch/m32r/include/asm/irq_regs.h
diff --git a/include/asm-m32r/kdebug.h b/arch/m32r/include/asm/kdebug.h
similarity index 100%
rename from include/asm-m32r/kdebug.h
rename to arch/m32r/include/asm/kdebug.h
diff --git a/include/asm-m32r/kmap_types.h b/arch/m32r/include/asm/kmap_types.h
similarity index 100%
rename from include/asm-m32r/kmap_types.h
rename to arch/m32r/include/asm/kmap_types.h
diff --git a/include/asm-m32r/linkage.h b/arch/m32r/include/asm/linkage.h
similarity index 100%
rename from include/asm-m32r/linkage.h
rename to arch/m32r/include/asm/linkage.h
diff --git a/include/asm-m32r/local.h b/arch/m32r/include/asm/local.h
similarity index 100%
rename from include/asm-m32r/local.h
rename to arch/m32r/include/asm/local.h
diff --git a/include/asm-m32r/m32102.h b/arch/m32r/include/asm/m32102.h
similarity index 100%
rename from include/asm-m32r/m32102.h
rename to arch/m32r/include/asm/m32102.h
diff --git a/include/asm-m32r/m32104ut/m32104ut_pld.h b/arch/m32r/include/asm/m32104ut/m32104ut_pld.h
similarity index 100%
rename from include/asm-m32r/m32104ut/m32104ut_pld.h
rename to arch/m32r/include/asm/m32104ut/m32104ut_pld.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lan.h b/arch/m32r/include/asm/m32700ut/m32700ut_lan.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_lan.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_lan.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_lcd.h b/arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_lcd.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_lcd.h
diff --git a/include/asm-m32r/m32700ut/m32700ut_pld.h b/arch/m32r/include/asm/m32700ut/m32700ut_pld.h
similarity index 100%
rename from include/asm-m32r/m32700ut/m32700ut_pld.h
rename to arch/m32r/include/asm/m32700ut/m32700ut_pld.h
diff --git a/include/asm-m32r/m32r.h b/arch/m32r/include/asm/m32r.h
similarity index 100%
rename from include/asm-m32r/m32r.h
rename to arch/m32r/include/asm/m32r.h
diff --git a/include/asm-m32r/m32r_mp_fpga.h b/arch/m32r/include/asm/m32r_mp_fpga.h
similarity index 100%
rename from include/asm-m32r/m32r_mp_fpga.h
rename to arch/m32r/include/asm/m32r_mp_fpga.h
diff --git a/include/asm-m32r/mappi2/mappi2_pld.h b/arch/m32r/include/asm/mappi2/mappi2_pld.h
similarity index 100%
rename from include/asm-m32r/mappi2/mappi2_pld.h
rename to arch/m32r/include/asm/mappi2/mappi2_pld.h
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/arch/m32r/include/asm/mappi3/mappi3_pld.h
similarity index 100%
rename from include/asm-m32r/mappi3/mappi3_pld.h
rename to arch/m32r/include/asm/mappi3/mappi3_pld.h
diff --git a/include/asm-m32r/mc146818rtc.h b/arch/m32r/include/asm/mc146818rtc.h
similarity index 100%
rename from include/asm-m32r/mc146818rtc.h
rename to arch/m32r/include/asm/mc146818rtc.h
diff --git a/include/asm-m32r/mman.h b/arch/m32r/include/asm/mman.h
similarity index 100%
rename from include/asm-m32r/mman.h
rename to arch/m32r/include/asm/mman.h
diff --git a/include/asm-m32r/mmu.h b/arch/m32r/include/asm/mmu.h
similarity index 100%
rename from include/asm-m32r/mmu.h
rename to arch/m32r/include/asm/mmu.h
diff --git a/include/asm-m32r/mmu_context.h b/arch/m32r/include/asm/mmu_context.h
similarity index 100%
rename from include/asm-m32r/mmu_context.h
rename to arch/m32r/include/asm/mmu_context.h
diff --git a/include/asm-m32r/mmzone.h b/arch/m32r/include/asm/mmzone.h
similarity index 100%
rename from include/asm-m32r/mmzone.h
rename to arch/m32r/include/asm/mmzone.h
diff --git a/include/asm-m32r/module.h b/arch/m32r/include/asm/module.h
similarity index 100%
rename from include/asm-m32r/module.h
rename to arch/m32r/include/asm/module.h
diff --git a/include/asm-m32r/msgbuf.h b/arch/m32r/include/asm/msgbuf.h
similarity index 100%
rename from include/asm-m32r/msgbuf.h
rename to arch/m32r/include/asm/msgbuf.h
diff --git a/include/asm-m32r/mutex.h b/arch/m32r/include/asm/mutex.h
similarity index 100%
rename from include/asm-m32r/mutex.h
rename to arch/m32r/include/asm/mutex.h
diff --git a/include/asm-m32r/opsput/opsput_lan.h b/arch/m32r/include/asm/opsput/opsput_lan.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_lan.h
rename to arch/m32r/include/asm/opsput/opsput_lan.h
diff --git a/include/asm-m32r/opsput/opsput_lcd.h b/arch/m32r/include/asm/opsput/opsput_lcd.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_lcd.h
rename to arch/m32r/include/asm/opsput/opsput_lcd.h
diff --git a/include/asm-m32r/opsput/opsput_pld.h b/arch/m32r/include/asm/opsput/opsput_pld.h
similarity index 100%
rename from include/asm-m32r/opsput/opsput_pld.h
rename to arch/m32r/include/asm/opsput/opsput_pld.h
diff --git a/include/asm-m32r/page.h b/arch/m32r/include/asm/page.h
similarity index 100%
rename from include/asm-m32r/page.h
rename to arch/m32r/include/asm/page.h
diff --git a/include/asm-m32r/param.h b/arch/m32r/include/asm/param.h
similarity index 100%
rename from include/asm-m32r/param.h
rename to arch/m32r/include/asm/param.h
diff --git a/include/asm-m32r/pci.h b/arch/m32r/include/asm/pci.h
similarity index 100%
rename from include/asm-m32r/pci.h
rename to arch/m32r/include/asm/pci.h
diff --git a/include/asm-m32r/percpu.h b/arch/m32r/include/asm/percpu.h
similarity index 100%
rename from include/asm-m32r/percpu.h
rename to arch/m32r/include/asm/percpu.h
diff --git a/include/asm-m32r/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
similarity index 100%
rename from include/asm-m32r/pgalloc.h
rename to arch/m32r/include/asm/pgalloc.h
diff --git a/include/asm-m32r/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h
similarity index 100%
rename from include/asm-m32r/pgtable-2level.h
rename to arch/m32r/include/asm/pgtable-2level.h
diff --git a/include/asm-m32r/pgtable.h b/arch/m32r/include/asm/pgtable.h
similarity index 100%
rename from include/asm-m32r/pgtable.h
rename to arch/m32r/include/asm/pgtable.h
diff --git a/include/asm-m32r/poll.h b/arch/m32r/include/asm/poll.h
similarity index 100%
rename from include/asm-m32r/poll.h
rename to arch/m32r/include/asm/poll.h
diff --git a/include/asm-m32r/posix_types.h b/arch/m32r/include/asm/posix_types.h
similarity index 100%
rename from include/asm-m32r/posix_types.h
rename to arch/m32r/include/asm/posix_types.h
diff --git a/include/asm-m32r/processor.h b/arch/m32r/include/asm/processor.h
similarity index 100%
rename from include/asm-m32r/processor.h
rename to arch/m32r/include/asm/processor.h
diff --git a/include/asm-m32r/ptrace.h b/arch/m32r/include/asm/ptrace.h
similarity index 100%
rename from include/asm-m32r/ptrace.h
rename to arch/m32r/include/asm/ptrace.h
diff --git a/include/asm-m32r/resource.h b/arch/m32r/include/asm/resource.h
similarity index 100%
rename from include/asm-m32r/resource.h
rename to arch/m32r/include/asm/resource.h
diff --git a/include/asm-m32r/rtc.h b/arch/m32r/include/asm/rtc.h
similarity index 100%
rename from include/asm-m32r/rtc.h
rename to arch/m32r/include/asm/rtc.h
diff --git a/include/asm-m32r/s1d13806.h b/arch/m32r/include/asm/s1d13806.h
similarity index 100%
rename from include/asm-m32r/s1d13806.h
rename to arch/m32r/include/asm/s1d13806.h
diff --git a/include/asm-m32r/scatterlist.h b/arch/m32r/include/asm/scatterlist.h
similarity index 100%
rename from include/asm-m32r/scatterlist.h
rename to arch/m32r/include/asm/scatterlist.h
diff --git a/include/asm-m32r/sections.h b/arch/m32r/include/asm/sections.h
similarity index 100%
rename from include/asm-m32r/sections.h
rename to arch/m32r/include/asm/sections.h
diff --git a/include/asm-m32r/segment.h b/arch/m32r/include/asm/segment.h
similarity index 100%
rename from include/asm-m32r/segment.h
rename to arch/m32r/include/asm/segment.h
diff --git a/include/asm-m32r/sembuf.h b/arch/m32r/include/asm/sembuf.h
similarity index 100%
rename from include/asm-m32r/sembuf.h
rename to arch/m32r/include/asm/sembuf.h
diff --git a/include/asm-m32r/serial.h b/arch/m32r/include/asm/serial.h
similarity index 100%
rename from include/asm-m32r/serial.h
rename to arch/m32r/include/asm/serial.h
diff --git a/include/asm-m32r/setup.h b/arch/m32r/include/asm/setup.h
similarity index 100%
rename from include/asm-m32r/setup.h
rename to arch/m32r/include/asm/setup.h
diff --git a/include/asm-m32r/shmbuf.h b/arch/m32r/include/asm/shmbuf.h
similarity index 100%
rename from include/asm-m32r/shmbuf.h
rename to arch/m32r/include/asm/shmbuf.h
diff --git a/include/asm-m32r/shmparam.h b/arch/m32r/include/asm/shmparam.h
similarity index 100%
rename from include/asm-m32r/shmparam.h
rename to arch/m32r/include/asm/shmparam.h
diff --git a/include/asm-m32r/sigcontext.h b/arch/m32r/include/asm/sigcontext.h
similarity index 100%
rename from include/asm-m32r/sigcontext.h
rename to arch/m32r/include/asm/sigcontext.h
diff --git a/include/asm-m32r/siginfo.h b/arch/m32r/include/asm/siginfo.h
similarity index 100%
rename from include/asm-m32r/siginfo.h
rename to arch/m32r/include/asm/siginfo.h
diff --git a/include/asm-m32r/signal.h b/arch/m32r/include/asm/signal.h
similarity index 100%
rename from include/asm-m32r/signal.h
rename to arch/m32r/include/asm/signal.h
diff --git a/include/asm-m32r/smp.h b/arch/m32r/include/asm/smp.h
similarity index 100%
rename from include/asm-m32r/smp.h
rename to arch/m32r/include/asm/smp.h
diff --git a/include/asm-m32r/socket.h b/arch/m32r/include/asm/socket.h
similarity index 100%
rename from include/asm-m32r/socket.h
rename to arch/m32r/include/asm/socket.h
diff --git a/include/asm-m32r/sockios.h b/arch/m32r/include/asm/sockios.h
similarity index 100%
rename from include/asm-m32r/sockios.h
rename to arch/m32r/include/asm/sockios.h
diff --git a/include/asm-m32r/spinlock.h b/arch/m32r/include/asm/spinlock.h
similarity index 100%
rename from include/asm-m32r/spinlock.h
rename to arch/m32r/include/asm/spinlock.h
diff --git a/include/asm-m32r/spinlock_types.h b/arch/m32r/include/asm/spinlock_types.h
similarity index 100%
rename from include/asm-m32r/spinlock_types.h
rename to arch/m32r/include/asm/spinlock_types.h
diff --git a/include/asm-m32r/stat.h b/arch/m32r/include/asm/stat.h
similarity index 100%
rename from include/asm-m32r/stat.h
rename to arch/m32r/include/asm/stat.h
diff --git a/include/asm-m32r/statfs.h b/arch/m32r/include/asm/statfs.h
similarity index 100%
rename from include/asm-m32r/statfs.h
rename to arch/m32r/include/asm/statfs.h
diff --git a/include/asm-m32r/string.h b/arch/m32r/include/asm/string.h
similarity index 100%
rename from include/asm-m32r/string.h
rename to arch/m32r/include/asm/string.h
diff --git a/include/asm-m32r/swab.h b/arch/m32r/include/asm/swab.h
similarity index 100%
rename from include/asm-m32r/swab.h
rename to arch/m32r/include/asm/swab.h
diff --git a/include/asm-m32r/syscall.h b/arch/m32r/include/asm/syscall.h
similarity index 100%
rename from include/asm-m32r/syscall.h
rename to arch/m32r/include/asm/syscall.h
diff --git a/include/asm-m32r/system.h b/arch/m32r/include/asm/system.h
similarity index 100%
rename from include/asm-m32r/system.h
rename to arch/m32r/include/asm/system.h
diff --git a/include/asm-m32r/termbits.h b/arch/m32r/include/asm/termbits.h
similarity index 100%
rename from include/asm-m32r/termbits.h
rename to arch/m32r/include/asm/termbits.h
diff --git a/include/asm-m32r/termios.h b/arch/m32r/include/asm/termios.h
similarity index 100%
rename from include/asm-m32r/termios.h
rename to arch/m32r/include/asm/termios.h
diff --git a/include/asm-m32r/thread_info.h b/arch/m32r/include/asm/thread_info.h
similarity index 100%
rename from include/asm-m32r/thread_info.h
rename to arch/m32r/include/asm/thread_info.h
diff --git a/include/asm-m32r/timex.h b/arch/m32r/include/asm/timex.h
similarity index 100%
rename from include/asm-m32r/timex.h
rename to arch/m32r/include/asm/timex.h
diff --git a/include/asm-m32r/tlb.h b/arch/m32r/include/asm/tlb.h
similarity index 100%
rename from include/asm-m32r/tlb.h
rename to arch/m32r/include/asm/tlb.h
diff --git a/include/asm-m32r/tlbflush.h b/arch/m32r/include/asm/tlbflush.h
similarity index 100%
rename from include/asm-m32r/tlbflush.h
rename to arch/m32r/include/asm/tlbflush.h
diff --git a/include/asm-m32r/topology.h b/arch/m32r/include/asm/topology.h
similarity index 100%
rename from include/asm-m32r/topology.h
rename to arch/m32r/include/asm/topology.h
diff --git a/include/asm-m32r/types.h b/arch/m32r/include/asm/types.h
similarity index 100%
rename from include/asm-m32r/types.h
rename to arch/m32r/include/asm/types.h
diff --git a/include/asm-m32r/uaccess.h b/arch/m32r/include/asm/uaccess.h
similarity index 100%
rename from include/asm-m32r/uaccess.h
rename to arch/m32r/include/asm/uaccess.h
diff --git a/include/asm-m32r/ucontext.h b/arch/m32r/include/asm/ucontext.h
similarity index 100%
rename from include/asm-m32r/ucontext.h
rename to arch/m32r/include/asm/ucontext.h
diff --git a/include/asm-m32r/unaligned.h b/arch/m32r/include/asm/unaligned.h
similarity index 100%
rename from include/asm-m32r/unaligned.h
rename to arch/m32r/include/asm/unaligned.h
diff --git a/include/asm-m32r/unistd.h b/arch/m32r/include/asm/unistd.h
similarity index 100%
rename from include/asm-m32r/unistd.h
rename to arch/m32r/include/asm/unistd.h
diff --git a/include/asm-m32r/user.h b/arch/m32r/include/asm/user.h
similarity index 100%
rename from include/asm-m32r/user.h
rename to arch/m32r/include/asm/user.h
diff --git a/include/asm-m32r/vga.h b/arch/m32r/include/asm/vga.h
similarity index 100%
rename from include/asm-m32r/vga.h
rename to arch/m32r/include/asm/vga.h
diff --git a/include/asm-m32r/xor.h b/arch/m32r/include/asm/xor.h
similarity index 100%
rename from include/asm-m32r/xor.h
rename to arch/m32r/include/asm/xor.h
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index 9091606..0a71944 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -23,7 +23,7 @@
 /*
  * References to members of the boot_cpu_data structure.
  */
-.section .text.head, "ax"
+__HEAD
 	.global	start_kernel
 	.global __bss_start
 	.global _end
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 9db05df..4179adf 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -27,7 +27,7 @@
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
-	*(.text.head)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 23597be..0f69fa5 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:42 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:52 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -157,7 +169,7 @@
 CONFIG_BINFMT_MISC=m
 CONFIG_ZORRO=y
 CONFIG_AMIGA_PCMCIA=y
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
@@ -184,7 +196,10 @@
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 # CONFIG_ARPD is not set
@@ -258,6 +273,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +282,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +293,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +372,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +407,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +421,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,15 +468,20 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -469,7 +489,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -478,7 +497,6 @@
 #
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
 
@@ -530,6 +548,8 @@
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -547,6 +567,7 @@
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -554,7 +575,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -567,6 +588,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -577,14 +599,16 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -609,7 +633,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -719,7 +746,7 @@
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
 
 #
 # Serial drivers
@@ -730,6 +757,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -821,6 +849,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -856,7 +885,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -867,14 +895,13 @@
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
 #
 CONFIG_AMIGA_BUILTIN_SERIAL=y
 CONFIG_MULTIFACE_III_TTY=m
-# CONFIG_SERIAL_CONSOLE is not set
+CONFIG_SERIAL_CONSOLE=y
 
 #
 # File systems
@@ -883,6 +910,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -909,13 +937,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -924,6 +954,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -935,8 +970,8 @@
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -954,10 +989,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -966,6 +998,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -976,23 +1011,24 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1067,11 +1103,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1092,13 +1123,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1113,7 +1152,7 @@
 #
 # Block modes
 #
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
@@ -1132,7 +1171,7 @@
 #
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -1154,7 +1193,7 @@
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -1168,6 +1207,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1175,11 +1215,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1191,10 +1233,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 935108d..5fff581 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:43 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:54 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -256,6 +268,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -264,6 +277,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -274,6 +288,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -352,25 +367,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -392,8 +402,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -404,8 +416,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -441,9 +453,13 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -491,8 +507,11 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -500,7 +519,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -513,6 +532,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -522,6 +542,8 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -538,7 +560,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -596,7 +621,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -636,6 +660,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -718,6 +743,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -749,7 +775,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -757,9 +782,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -774,6 +799,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -800,13 +826,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -815,6 +843,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -845,10 +878,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -857,6 +887,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -867,6 +900,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -883,7 +917,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -958,11 +991,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -983,13 +1011,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1059,6 +1095,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1066,11 +1103,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1082,10 +1121,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index a594a1d..d92a90e 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:44 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:56 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -180,7 +192,10 @@
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 # CONFIG_ARPD is not set
@@ -254,6 +269,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -262,6 +278,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -272,6 +289,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -350,25 +368,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -390,8 +403,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -402,8 +417,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -445,15 +460,20 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -461,7 +481,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -516,11 +535,14 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATARI_SCSI=y
 # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
 # CONFIG_ATARI_SCSI_RESET_BOOT is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -528,7 +550,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -541,6 +563,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -550,7 +573,9 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -568,7 +593,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -625,11 +653,10 @@
 CONFIG_ATARI_KBD_CORE=y
 CONFIG_KEYBOARD_ATARI=y
 CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -649,7 +676,7 @@
 CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -673,6 +700,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -760,6 +788,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -794,7 +823,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -805,14 +833,14 @@
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
 #
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
+CONFIG_SERIAL_CONSOLE=y
 
 #
 # File systems
@@ -821,6 +849,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -847,13 +876,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -862,6 +893,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -892,10 +928,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -904,6 +937,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -914,22 +950,24 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
@@ -1004,11 +1042,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1029,13 +1062,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1050,7 +1091,7 @@
 #
 # Block modes
 #
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
@@ -1069,7 +1110,7 @@
 #
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -1091,7 +1132,7 @@
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -1105,6 +1146,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1112,11 +1154,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
@@ -1128,10 +1172,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index d3d9814..6e6b1aa 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:45 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:59 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -143,12 +154,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -258,6 +270,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +279,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +290,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +369,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,9 +455,13 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,10 +509,13 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_BVME6000_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -504,7 +523,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -517,6 +536,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,6 +547,8 @@
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_BVME6000_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -543,7 +565,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -601,7 +626,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -641,6 +665,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -717,7 +742,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -725,9 +749,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -742,6 +766,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -768,13 +793,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -783,6 +810,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -813,10 +845,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -825,6 +854,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -835,6 +867,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -851,7 +884,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -927,11 +959,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -952,13 +979,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1028,6 +1063,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1035,11 +1071,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1051,10 +1089,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 5556ef0..bc0565f 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:46 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:01 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -141,12 +152,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -257,6 +269,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -265,6 +278,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -275,6 +289,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -353,25 +368,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -393,8 +403,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -405,8 +417,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,9 +454,13 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -492,8 +508,11 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -501,7 +520,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -514,6 +533,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -524,6 +544,8 @@
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_HPLANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -540,7 +562,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -600,7 +625,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -646,6 +670,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -728,6 +753,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -759,7 +785,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -767,9 +792,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -782,6 +807,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -808,13 +834,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -823,6 +851,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -853,10 +886,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -865,6 +895,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -875,6 +908,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -891,7 +925,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -966,11 +999,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -991,13 +1019,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1067,6 +1103,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1074,11 +1111,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1090,10 +1129,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index c6de257..9991b64 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:47 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:03 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -142,12 +153,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -255,6 +267,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -263,6 +276,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -273,6 +287,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -351,25 +366,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -429,6 +441,7 @@
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_SWIM=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -443,15 +456,20 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -459,7 +477,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -514,10 +531,13 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -525,7 +545,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -547,6 +567,7 @@
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -561,6 +582,8 @@
 CONFIG_MACSONIC=m
 CONFIG_MACMACE=y
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -577,7 +600,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -635,7 +661,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -677,6 +702,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -760,6 +786,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -793,7 +820,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -801,9 +827,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -819,6 +845,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -845,13 +872,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -860,6 +889,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -890,10 +924,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=y
@@ -902,6 +933,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -912,6 +946,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -927,7 +962,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1003,11 +1037,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1028,13 +1057,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1104,6 +1141,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1111,11 +1149,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1127,10 +1167,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 7069358..69c43e2 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:48 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:06 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -146,12 +157,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -268,6 +280,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -276,6 +289,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -286,6 +300,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -364,25 +379,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -408,8 +418,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -420,8 +432,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -454,6 +466,7 @@
 CONFIG_BLK_DEV=y
 CONFIG_AMIGA_FLOPPY=y
 CONFIG_ATARI_FLOPPY=y
+CONFIG_BLK_DEV_SWIM=y
 CONFIG_AMIGA_Z2RAM=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -469,15 +482,20 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -485,7 +503,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -494,7 +511,6 @@
 #
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_BLK_DEV_MAC_IDE=y
@@ -549,6 +565,8 @@
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -575,6 +593,7 @@
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -582,7 +601,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -604,6 +623,7 @@
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -614,24 +634,26 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
 CONFIG_MAC8390=y
-CONFIG_MAC89x0=m
-CONFIG_MACSONIC=m
+CONFIG_MAC89x0=y
+CONFIG_MACSONIC=y
 CONFIG_MACMACE=y
 CONFIG_MVME147_NET=y
 CONFIG_MVME16x_NET=y
 CONFIG_BVME6000_NET=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
 CONFIG_SUN3LANCE=y
 CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -657,7 +679,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -717,11 +742,10 @@
 CONFIG_KEYBOARD_HIL_OLD=y
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -732,7 +756,7 @@
 CONFIG_MOUSE_AMIGA=m
 CONFIG_MOUSE_ATARI=m
 # CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=m
+CONFIG_MOUSE_HIL=y
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
 # CONFIG_JOYSTICK_A3D is not set
@@ -763,18 +787,18 @@
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
 # CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=m
+CONFIG_HP_SDC_RTC=y
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_Q40KBD=m
+CONFIG_SERIO_Q40KBD=y
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_HP_SDC=y
 CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -788,7 +812,7 @@
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
 
 #
 # Serial drivers
@@ -799,6 +823,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -807,7 +832,7 @@
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC=y
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -898,6 +923,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -937,7 +963,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -948,13 +973,12 @@
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
 #
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
 CONFIG_MULTIFACE_III_TTY=m
@@ -974,6 +998,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -1000,13 +1025,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -1015,6 +1042,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -1045,10 +1077,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=y
@@ -1057,6 +1086,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -1067,6 +1099,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1083,7 +1116,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1163,11 +1195,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1188,13 +1215,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1264,6 +1299,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1271,11 +1307,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
@@ -1287,10 +1325,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 52d4271..7dceb5d 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:50 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:08 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -143,12 +154,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -258,6 +270,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +279,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +290,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +369,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,9 +455,13 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,9 +509,12 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME147_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -503,7 +522,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -516,6 +535,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -526,6 +546,8 @@
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MVME147_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -542,7 +564,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -600,7 +625,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -640,6 +664,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -716,7 +741,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -724,9 +748,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -741,6 +765,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -767,13 +792,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -782,6 +809,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -812,10 +844,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -824,6 +853,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -834,6 +866,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -850,7 +883,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -926,11 +958,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -951,13 +978,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1027,6 +1062,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1034,11 +1070,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1050,10 +1088,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 3403ed2..890594f 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:51 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:10 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -143,12 +154,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -258,6 +270,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -266,6 +279,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -276,6 +290,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -354,25 +369,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -394,8 +404,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -406,8 +418,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,9 +455,13 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,10 +509,13 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME16x_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -504,7 +523,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -517,6 +536,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -527,6 +547,8 @@
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_MVME16x_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -543,7 +565,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -601,7 +626,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -641,6 +665,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -717,7 +742,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -725,9 +749,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -743,6 +767,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -769,13 +794,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -784,6 +811,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -814,10 +846,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -826,6 +855,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -836,6 +868,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -852,7 +885,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -928,11 +960,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -953,13 +980,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1029,6 +1064,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1036,11 +1072,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1052,10 +1090,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 3459c59..7cf58c2 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:52 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:13 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -255,6 +267,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -263,6 +276,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -273,6 +287,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -351,25 +366,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -391,8 +401,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -403,8 +415,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -441,15 +453,20 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -457,7 +474,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -516,6 +532,8 @@
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -527,6 +545,7 @@
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -534,7 +553,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -547,6 +566,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -559,7 +579,9 @@
 # CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
 # CONFIG_AT1700 is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
@@ -584,7 +606,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -642,7 +667,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -688,6 +712,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -771,6 +796,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -805,7 +831,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -813,9 +838,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -828,6 +853,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -854,13 +880,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -869,6 +897,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -899,10 +932,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -911,6 +941,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -921,6 +954,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -936,7 +970,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1011,11 +1044,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1036,13 +1064,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1112,6 +1148,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1119,11 +1156,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1135,10 +1174,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index f404917..f27c1a4 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:53 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:16 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -138,12 +149,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -253,6 +265,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -261,6 +274,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -271,6 +285,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -349,25 +364,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -389,8 +399,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -401,8 +413,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,9 +450,13 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -488,9 +504,12 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3_SCSI=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -498,7 +517,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -511,6 +530,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -522,6 +542,8 @@
 # CONFIG_MII is not set
 CONFIG_SUN3LANCE=y
 CONFIG_SUN3_82586=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -537,7 +559,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -595,7 +620,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -635,6 +659,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -710,6 +735,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -741,16 +767,15 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -763,6 +788,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -789,13 +815,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -804,6 +832,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -834,10 +867,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -846,6 +876,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -856,6 +889,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -872,7 +906,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -948,11 +981,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -973,13 +1001,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1049,6 +1085,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1056,11 +1093,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1072,9 +1111,12 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 4d8a1e8..c40edb9 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec  2 20:27:54 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:20 2009
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -29,14 +29,24 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -44,23 +54,27 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -68,15 +82,16 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -84,11 +99,8 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -104,7 +116,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
@@ -140,12 +151,13 @@
 CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # General setup
@@ -255,6 +267,7 @@
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
@@ -263,6 +276,7 @@
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -273,6 +287,7 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -351,25 +366,20 @@
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
@@ -391,8 +401,10 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -403,8 +415,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -440,9 +452,13 @@
 CONFIG_ATA_OVER_ETH=m
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,9 +506,12 @@
 CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3X_ESP=y
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -500,7 +519,7 @@
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -513,6 +532,7 @@
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@@ -523,6 +543,8 @@
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -539,7 +561,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -597,7 +622,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -637,6 +661,7 @@
 # Non-8250 serial port support
 #
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -718,6 +743,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -749,7 +775,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -757,9 +782,9 @@
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # Character devices
@@ -772,6 +797,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -798,13 +824,15 @@
 # CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
@@ -813,6 +841,11 @@
 CONFIG_FUSE_FS=m
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
@@ -843,10 +876,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
@@ -855,6 +885,9 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
 # CONFIG_OMFS_FS is not set
@@ -865,6 +898,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -881,7 +915,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -957,11 +990,6 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -982,13 +1010,21 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1058,6 +1094,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -1065,11 +1102,13 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
@@ -1081,10 +1120,13 @@
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 3c19027..aa29a86 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -332,10 +332,12 @@
 #define __NR_dup3		326
 #define __NR_pipe2		327
 #define __NR_inotify_init1	328
+#define __NR_preadv		329
+#define __NR_pwritev		330
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		329
+#define NR_syscalls		331
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 5c332f2..8744f60 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -753,4 +753,6 @@
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev		/* 330 */
 
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index f513f53..86edb5f 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -577,7 +577,7 @@
 #endif
 .endm
 
-.section ".text.head","ax"
+__HEAD
 ENTRY(_stext)
 /*
  * Version numbers of the bootinfo interface
diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S
index aad0159..9e5c3e5 100644
--- a/arch/m68k/kernel/sun3-head.S
+++ b/arch/m68k/kernel/sun3-head.S
@@ -29,7 +29,7 @@
 .globl kernel_pg_dir
 .equ    kernel_pg_dir,kernel_pmd_table
 
-	.section .text.head
+	__HEAD
 ENTRY(_stext)
 ENTRY(_start)
 
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index f846d4e..01d212b 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -12,7 +12,7 @@
   . = 0x1000;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(.text.head)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index d9368c0..c192f77 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -12,7 +12,7 @@
   . = 0xE002000;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(.text.head)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 4beb59d..5343762 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -16,6 +16,7 @@
 
 config NO_DMA
 	bool
+	depends on !COLDFIRE
 	default y
 
 config FPU
diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig
index 6fae33a..854a4f3 100644
--- a/arch/m68knommu/configs/m5208evb_defconfig
+++ b/arch/m68knommu/configs/m5208evb_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +15,10 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,53 +34,55 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,7 +96,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -145,44 +148,39 @@
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -223,6 +221,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -232,7 +231,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -243,14 +244,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -289,10 +284,8 @@
 #
 # RAM/ROM/Flash chip drivers
 #
-CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI is not set
 # CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -303,10 +296,6 @@
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -315,7 +304,6 @@
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_PLATRAM is not set
 
@@ -337,6 +325,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -351,6 +344,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -364,7 +358,7 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -374,10 +368,15 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
@@ -389,8 +388,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -415,7 +416,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -428,7 +429,6 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=115200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -447,19 +447,23 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -470,11 +474,12 @@
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
-# CONFIG_DAB is not set
+CONFIG_DAB=y
 
 #
 # Graphics support
@@ -488,10 +493,6 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -499,7 +500,10 @@
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -507,11 +511,13 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -520,6 +526,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -540,10 +551,7 @@
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -553,13 +561,20 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -581,10 +596,14 @@
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 CONFIG_FULLDEBUG=y
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -592,19 +611,23 @@
 # Security options
 #
 # CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig
index cc64583..2efba32 100644
--- a/arch/m68knommu/configs/m5249evb_defconfig
+++ b/arch/m68knommu/configs/m5249evb_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:32:41 2009
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +16,10 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -29,11 +31,23 @@
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -41,44 +55,37 @@
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -92,7 +99,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -144,45 +151,103 @@
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_NET=y
 
 #
-# Networking
+# Networking options
 #
-# CONFIG_NET is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -194,6 +259,7 @@
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -259,6 +325,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -266,14 +337,15 @@
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -285,6 +357,56 @@
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
@@ -302,7 +424,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -315,7 +437,6 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -323,7 +444,8 @@
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -334,19 +456,23 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -356,11 +482,13 @@
 # Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
-# CONFIG_DAB is not set
+CONFIG_DAB=y
 
 #
 # Graphics support
@@ -374,10 +502,6 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -385,7 +509,10 @@
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -393,19 +520,28 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -427,10 +563,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -440,13 +573,21 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
@@ -454,6 +595,7 @@
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
@@ -468,10 +610,14 @@
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -480,18 +626,22 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68knommu/configs/m5272c3_defconfig b/arch/m68knommu/configs/m5272c3_defconfig
new file mode 100644
index 0000000..f37852a
--- /dev/null
+++ b/arch/m68knommu/configs/m5272c3_defconfig
@@ -0,0 +1,645 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:17:30 2009
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_NO_IOPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+CONFIG_M5272=y
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=66666666
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+# CONFIG_UC5272 is not set
+CONFIG_M5272C3=y
+# CONFIG_COBRA5272 is not set
+# CONFIG_CANCam is not set
+# CONFIG_SCALES is not set
+# CONFIG_NETtel is not set
+# CONFIG_CPU16B is not set
+# CONFIG_MOD5272 is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig
index 0d1256f..dc5c621 100644
--- a/arch/m68knommu/configs/m5275evb_defconfig
+++ b/arch/m68knommu/configs/m5275evb_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 23:29:01 2009
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +16,10 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,10 +35,19 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -44,44 +55,37 @@
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,7 +99,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -148,44 +152,39 @@
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -226,6 +225,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -235,7 +235,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -246,14 +248,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -333,6 +329,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -347,6 +348,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -360,7 +362,7 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -370,10 +372,15 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 CONFIG_FEC=y
 CONFIG_FEC2=y
@@ -385,8 +392,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -421,7 +430,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -434,7 +443,6 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -442,7 +450,8 @@
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -453,19 +462,23 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -476,6 +489,7 @@
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -494,10 +508,6 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -505,7 +515,10 @@
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -513,12 +526,14 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -527,6 +542,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -548,10 +568,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -561,21 +578,21 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
@@ -598,10 +615,14 @@
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -610,18 +631,22 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig
index fe2acdf..3a3f673 100644
--- a/arch/m68knommu/configs/m5307c3_defconfig
+++ b/arch/m68knommu/configs/m5307c3_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,9 +15,10 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,10 +34,21 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -44,44 +56,37 @@
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,7 +100,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -127,12 +132,11 @@
 #
 # CONFIG_ARN5307 is not set
 CONFIG_M5307C3=y
-# CONFIG_eLIA is not set
 # CONFIG_SECUREEDGEMP3 is not set
 # CONFIG_CLEOPATRA is not set
 # CONFIG_NETtel is not set
 CONFIG_FREESCALE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
 CONFIG_HZ=100
 
 #
@@ -153,45 +157,36 @@
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -232,6 +227,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -241,7 +237,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -252,14 +250,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -274,7 +266,79 @@
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -286,6 +350,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -299,7 +364,7 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -309,10 +374,15 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -322,8 +392,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -381,7 +453,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -394,13 +466,12 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
@@ -413,19 +484,23 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -436,6 +511,7 @@
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -454,10 +530,6 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -466,7 +538,10 @@
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -474,12 +549,14 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -488,6 +565,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -509,10 +591,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -520,14 +599,22 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -551,10 +638,14 @@
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 CONFIG_FULLDEBUG=y
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -563,18 +654,22 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig
index 1118936..97b6cde 100644
--- a/arch/m68knommu/configs/m5407c3_defconfig
+++ b/arch/m68knommu/configs/m5407c3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Wed May  7 10:25:16 2008
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 09:21:40 2009
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -16,9 +16,10 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,10 +35,19 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -45,44 +55,43 @@
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -96,7 +105,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # Processor type and features
@@ -149,45 +158,36 @@
 # CONFIG_ROM is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
 # CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -228,6 +228,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -237,7 +238,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -248,14 +251,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -274,6 +271,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -335,6 +333,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -349,6 +352,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -362,7 +366,7 @@
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -372,10 +376,15 @@
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -385,8 +394,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -409,39 +420,22 @@
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -454,7 +448,6 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
 CONFIG_SERIAL_MCF=y
 CONFIG_SERIAL_MCF_BAUDRATE=19200
 CONFIG_SERIAL_MCF_CONSOLE=y
@@ -473,19 +466,23 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -496,6 +493,7 @@
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -514,19 +512,17 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -534,12 +530,14 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -548,6 +546,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -569,10 +572,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -582,13 +582,20 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -611,11 +618,17 @@
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
 
@@ -624,18 +637,22 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c
index c785d07..f500dd6 100644
--- a/arch/m68knommu/kernel/asm-offsets.c
+++ b/arch/m68knommu/kernel/asm-offsets.c
@@ -30,9 +30,6 @@
 	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
 	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
 
-	/* offsets into the kernel_stat struct */
-	DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
 	/* offsets into the irq_cpustat_t struct */
 	DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
 
@@ -69,9 +66,6 @@
 	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
 #endif
 
-	/* offsets into the kernel_stat struct */
-	DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
 	/* signal defines */
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(SEGV_MAPERR, SEGV_MAPERR);
diff --git a/arch/m68knommu/kernel/dma.c b/arch/m68knommu/kernel/dma.c
index 9361258..aaf38bb 100644
--- a/arch/m68knommu/kernel/dma.c
+++ b/arch/m68knommu/kernel/dma.c
@@ -7,10 +7,9 @@
 
 #include <linux/types.h>
 #include <linux/mm.h>
-#include <linux/string.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
-#include <asm/io.h>
+#include <asm/cacheflush.h>
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
@@ -36,7 +35,39 @@
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir)
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+				size_t size, enum dma_data_direction dir)
 {
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		flush_dcache_range(handle, size);
+		break;
+	case DMA_FROM_DEVICE:
+		/* Should be clear already */
+		break;
+	default:
+		if (printk_ratelimit())
+			printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
+		break;
+	}
 }
 
+EXPORT_SYMBOL(dma_sync_single_for_device);
+dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
+			  enum dma_data_direction dir)
+{
+	dma_addr_t handle = virt_to_phys(addr);
+	flush_dcache_range(handle, size);
+	return handle;
+}
+EXPORT_SYMBOL(dma_map_single);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			unsigned long offset, size_t size,
+			enum dma_data_direction dir)
+{
+	dma_addr_t handle = page_to_phys(page) + offset;
+	dma_sync_single_for_device(dev, handle, size, dir);
+	return handle;
+}
+EXPORT_SYMBOL(dma_map_page);
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 1017e76..c0b8782 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -347,6 +347,8 @@
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev		/* 330 */
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 69ba9b1..b7fe505 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -147,6 +147,8 @@
 		. = ALIGN(4);
 		_sdata = . ;
 		DATA_DATA
+		. = ALIGN(32);
+		*(.data.cacheline_aligned)
 		. = ALIGN(8192) ;
 		*(.data.init_task)
 		_edata = . ;
diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index 49343fb..428b159 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -189,10 +189,15 @@
 	m527x_fec_irq_init(0);
 
 	/* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+	v = readb(MCF_IPSBAR + 0x100047);
+	writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
 	par = readw(MCF_IPSBAR + 0x100082);
 	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
 	v = readb(MCF_IPSBAR + 0x100078);
 	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+#endif
 
 #ifdef CONFIG_FEC2
 	m527x_fec_irq_init(1);
diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c
index 6bafefa..309f725 100644
--- a/arch/m68knommu/platform/68328/timers.c
+++ b/arch/m68knommu/platform/68328/timers.c
@@ -75,7 +75,7 @@
 
 /***************************************************************************/
 
-static cycle_t m68328_read_clk(void)
+static cycle_t m68328_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 cycles;
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
index 772578b..a5f5628 100644
--- a/arch/m68knommu/platform/coldfire/dma_timer.c
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -34,7 +34,7 @@
 #define DMA_DTMR_CLK_DIV_16	(2 << 1)
 #define DMA_DTMR_ENABLE		(1 << 0)
 
-static cycle_t cf_dt_get_cycles(void)
+static cycle_t cf_dt_get_cycles(struct clocksource *cs)
 {
 	return __raw_readl(DTCN0);
 }
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 2a12e7f..61b9621 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -125,7 +125,7 @@
 
 /***************************************************************************/
 
-static cycle_t pit_read_clk(void)
+static cycle_t pit_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 cycles;
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index 454f254..1ba8a37 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -78,7 +78,7 @@
 
 /***************************************************************************/
 
-static cycle_t mcftmr_read_clk(void)
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
 {
 	unsigned long flags;
 	u32 cycles;
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 0dcbb98..aaadfa7 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -26,21 +26,19 @@
 endif
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
 CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
 # The various CONFIG_XILINX cpu features options are integers 0/1/2...
 # rather than bools y/n
-CFLAGS += $(CPUFLAGS-1)
-CFLAGS += $(CPUFLAGS-2)
 
 # r31 holds current when in kernel mode
-CFLAGS += -ffixed-r31
+CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
-LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
 
 head-y		:= arch/microblaze/kernel/head.o
 libs-y		+= arch/microblaze/lib/ $(LIBGCC)
diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h
index c4c64b4..c209c47 100644
--- a/arch/microblaze/include/asm/cache.h
+++ b/arch/microblaze/include/asm/cache.h
@@ -37,9 +37,4 @@
 #define __disable_dcache()		_disable_dcache()
 #define __invalidate_dcache(addr)	_invalidate_dcache(addr)
 
-/* FIXME - I don't think this is right */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
-#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE)
-#endif
-
 #endif /* _ASM_MICROBLAZE_CACHE_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index 7f57e42..e4c3aef 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -29,7 +29,9 @@
 DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
 DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
-DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */
 # endif /* __ASSEMBLY__ */
 
+/* noMMU hasn't any space for args */
+# define STATE_SAVE_ARG_SPACE	(0)
+
 #endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 4cdd215..24ca540 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -61,6 +61,9 @@
 asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 							int fsr, int addr);
 
+void die(const char *str, struct pt_regs *fp, long err);
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+
 #if defined(CONFIG_XMON)
 extern void xmon(struct pt_regs *regs);
 extern int xmon_bpt(struct pt_regs *regs);
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index d8e1543..9329029 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -15,6 +15,8 @@
 #include <asm/setup.h>
 #include <asm/registers.h>
 #include <asm/segment.h>
+#include <asm/entry.h>
+#include <asm/current.h>
 
 # ifndef __ASSEMBLY__
 /* from kernel/cpu/mb.c */
@@ -26,6 +28,12 @@
 
 # endif /* __ASSEMBLY__ */
 
+#define task_pt_regs(tsk) \
+		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+
 /*
  * User space process size: memory size
  *
@@ -55,16 +63,6 @@
 struct thread_struct { };
 # define INIT_THREAD	{ }
 
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread(struct pt_regs *regs,
-				unsigned long pc,
-				unsigned long usp)
-{
-	regs->pc = pc;
-	regs->r1 = usp;
-	regs->kernel_mode = 0;
-}
-
 /* Free all resources held by a thread. */
 static inline void release_thread(struct task_struct *dead_task)
 {
@@ -84,9 +82,6 @@
  */
 extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
 
-# define task_pt_regs(tsk) \
-		(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
-
 # define KSTK_EIP(tsk)	(0)
 # define KSTK_ESP(tsk)	(0)
 
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index f1f0348..55015bc 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -52,10 +52,10 @@
 	microblaze_reg_t ear;
 	microblaze_reg_t esr;
 	microblaze_reg_t fsr;
-	int kernel_mode;
+	int pt_mode;
 };
 
-#define kernel_mode(regs)		((regs)->kernel_mode)
+#define kernel_mode(regs)		((regs)->pt_mode)
 #define user_mode(regs)			(!kernel_mode(regs))
 
 #define instruction_pointer(regs)	((regs)->pc)
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index d9d3903..b5e2f5f 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -378,8 +378,10 @@
 #define __NR_sendmsg		360 /* new */
 #define __NR_recvmsg		361 /* new */
 #define __NR_accept04		362 /* new */
+#define __NR_preadv		363 /* new */
+#define __NR_pwritev		364 /* new */
 
-#define __NR_syscalls		363
+#define __NR_syscalls		365
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index 38e1a2e..aabd9e9 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -57,7 +57,7 @@
 	DEFINE(PT_R29, offsetof(struct pt_regs, r29));
 	DEFINE(PT_R30, offsetof(struct pt_regs, r30));
 	DEFINE(PT_R31, offsetof(struct pt_regs, r31));
-	DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode));
+	DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode));
 	BLANK();
 
 	/* Magic offsets for PTRACE PEEK/POKE etc */
diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c
index be9fecc..af866a4 100644
--- a/arch/microblaze/kernel/cpu/cache.c
+++ b/arch/microblaze/kernel/cpu/cache.c
@@ -100,7 +100,6 @@
 
 void _disable_dcache(void)
 {
-	if (cpuinfo.use_dcache) {
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 		__asm__ __volatile__ ("					\
 				msrclr	r0, %0;				\
@@ -119,12 +118,10 @@
 				: "i" (MSR_DCE)			\
 				: "memory", "r12");
 #endif
-	}
 }
 
 void _invalidate_dcache(unsigned int addr)
 {
-	if (cpuinfo.use_dcache)
 		__asm__ __volatile__ ("					\
 				wdc	%0, r0"				\
 				:					\
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index cf7424a..153f57c 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -30,6 +30,13 @@
 	int temp; /* for saving temp value */
 	get_pvr(&pvr);
 
+	CI(ver_code, VERSION);
+	if (!ci->ver_code) {
+		printk(KERN_ERR "ERROR: MB has broken PVR regs "
+						"-> use DTS setting\n");
+		return;
+	}
+
 	temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\
 		PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
 	if (ci->use_instr != temp)
@@ -60,8 +67,6 @@
 
 	CI(mmu, USE_MMU);
 
-	CI(ver_code, VERSION);
-
 	CI(use_icache, USE_ICACHE);
 	CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
 	CI(icache_write, ICACHE_ALLOW_WR);
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index 4a740df..a10bea1 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -71,7 +71,7 @@
 			__func__);
 		set_cpuinfo_static(&cpuinfo, cpu);
 		break;
-/* FIXME I found weird behavior with MB 7.00.a/b
+/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a
  * please do not use FULL PVR with MMU */
 	case 1:
 		printk(KERN_INFO "%s: Using full CPU PVR support\n",
diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
index 3b6212b..4dcfccd 100644
--- a/arch/microblaze/kernel/cpu/mb.c
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -115,8 +115,8 @@
 			cpuinfo.hw_debug ? "yes" : "no");
 
 	count += seq_printf(m,
-			"PVR-USR1:\t%x\n"
-			"PVR-USR2:\t%x\n",
+			"PVR-USR1:\t%02x\n"
+			"PVR-USR2:\t%08x\n",
 			cpuinfo.pvr_user1,
 			cpuinfo.pvr_user2);
 
diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c
index 62cc789..4b0f0fd 100644
--- a/arch/microblaze/kernel/early_printk.c
+++ b/arch/microblaze/kernel/early_printk.c
@@ -36,7 +36,7 @@
 
 	unsigned retries = 10000;
 	/* read status bit - 0x8 offset */
-	while (retries-- && (in_be32(base_addr + 8) & (1 << 3)))
+	while (--retries && (in_be32(base_addr + 8) & (1 << 3)))
 		;
 
 	/* Only attempt the iowrite if we didn't timeout */
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 436f26c..07d4fa3 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -18,7 +18,7 @@
 
 void show_regs(struct pt_regs *regs)
 {
-	printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode);
+	printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode);
 	printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
 				regs->r1, regs->r2, regs->r3, regs->r4);
 	printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
@@ -37,8 +37,6 @@
 				regs->r29, regs->r30, regs->r31, regs->pc);
 	printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
 				regs->msr, regs->ear, regs->esr, regs->fsr);
-	while (1)
-		;
 }
 
 void (*pm_idle)(void);
@@ -163,7 +161,6 @@
 int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 {
 	struct pt_regs regs;
-	int ret;
 
 	memset(&regs, 0, sizeof(regs));
 	/* store them in non-volatile registers */
@@ -171,12 +168,10 @@
 	regs.r6 = (unsigned long)arg;
 	local_save_flags(regs.msr);
 	regs.pc = (unsigned long)kernel_thread_helper;
-	regs.kernel_mode = 1;
+	regs.pt_mode = 1;
 
-	ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
 			&regs, 0, NULL, NULL);
-
-	return ret;
 }
 
 unsigned long get_wchan(struct task_struct *p)
@@ -184,3 +179,12 @@
 /* TBD (used by procfs) */
 	return 0;
 }
+
+/* Set up a thread for executing a new program */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+	set_fs(USER_DS);
+	regs->pc = pc;
+	regs->r1 = usp;
+	regs->pt_mode = 0;
+}
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 3889cf4..40d3693 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -178,7 +178,9 @@
 
 asmlinkage int sys_sigreturn(struct pt_regs *regs)
 {
-	struct sigframe *frame = (struct sigframe *)regs->r1;
+	struct sigframe *frame =
+			(struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
 	sigset_t set;
 	int rval;
 
@@ -209,7 +211,9 @@
 
 asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 {
-	struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1;
+	struct rt_sigframe *frame =
+			(struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
 	sigset_t set;
 	stack_t st;
 	int rval;
@@ -336,7 +340,8 @@
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->r1 = (unsigned long) frame;
+	regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
 	/* Signal handler args: */
 	regs->r5 = signal; /* Arg 0: signum */
 	regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
@@ -414,7 +419,8 @@
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->r1 = (unsigned long) frame;
+	regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
 	/* Signal handler args: */
 	regs->r5 = signal; /* arg 0: signum */
 	regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 529b0db..3bb42ec 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -363,3 +363,5 @@
 	.long sys_sendmsg		/* 360 */
 	.long sys_recvmsg
 	.long sys_ni_syscall
+	.long sys_ni_syscall
+	.long sys_ni_syscall
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 05a497e..bdfa2f9 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -176,7 +176,7 @@
 	clockevents_register_device(&clockevent_microblaze_timer);
 }
 
-static cycle_t microblaze_read(void)
+static cycle_t microblaze_read(struct clocksource *cs)
 {
 	/* reading actual value of timer 1 */
 	return (cycle_t) (in_be32(TIMER_BASE + TCR1));
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index fbdc533..293ef48 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -34,7 +34,7 @@
 
 static int __init kstack_setup(char *s)
 {
-	kstack_depth_to_print = strict_strtoul(s, 0, 0);
+	kstack_depth_to_print = strict_strtoul(s, 0, NULL);
 
 	return 1;
 }
diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c
index eccf7d6..2e911e3 100644
--- a/arch/mips/kernel/cevt-txx9.c
+++ b/arch/mips/kernel/cevt-txx9.c
@@ -22,7 +22,7 @@
 
 static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr;
 
-static cycle_t txx9_cs_read(void)
+static cycle_t txx9_cs_read(struct clocksource *cs)
 {
 	return __raw_readl(&txx9_cs_tmrptr->trr);
 }
diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c
index 868745e..51489f8 100644
--- a/arch/mips/kernel/csrc-bcm1480.c
+++ b/arch/mips/kernel/csrc-bcm1480.c
@@ -28,7 +28,7 @@
 
 #include <asm/sibyte/sb1250.h>
 
-static cycle_t bcm1480_hpt_read(void)
+static cycle_t bcm1480_hpt_read(struct clocksource *cs)
 {
 	return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
 }
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index 1d5f63c..b551f48 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -25,7 +25,7 @@
 #include <asm/dec/ioasic.h>
 #include <asm/dec/ioasic_addrs.h>
 
-static cycle_t dec_ioasic_hpt_read(void)
+static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
 {
 	return ioasic_read(IO_REG_FCTR);
 }
@@ -47,13 +47,13 @@
 	while (!ds1287_timer_state())
 		;
 
-	start = dec_ioasic_hpt_read();
+	start = dec_ioasic_hpt_read(&clocksource_dec);
 
 	while (i--)
 		while (!ds1287_timer_state())
 			;
 
-	end = dec_ioasic_hpt_read();
+	end = dec_ioasic_hpt_read(&clocksource_dec);
 
 	freq = (end - start) * 10;
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index f1a2893..e95a3cd 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -10,7 +10,7 @@
 
 #include <asm/time.h>
 
-static cycle_t c0_hpt_read(void)
+static cycle_t c0_hpt_read(struct clocksource *cs)
 {
 	return read_c0_count();
 }
diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c
index 92212bb..d14d3d1 100644
--- a/arch/mips/kernel/csrc-sb1250.c
+++ b/arch/mips/kernel/csrc-sb1250.c
@@ -33,7 +33,7 @@
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
  */
-static cycle_t sb1250_hpt_read(void)
+static cycle_t sb1250_hpt_read(struct clocksource *cs)
 {
 	unsigned int count;
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 689719e..ed20e7f 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -128,7 +128,7 @@
  * to just read by itself. So use jiffies to emulate a free
  * running counter:
  */
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
 {
 	unsigned long flags;
 	int count;
diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c
index cf293b2..8df43e9 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/nxp/pnx8550/common/time.c
@@ -35,7 +35,7 @@
 
 static unsigned long cpj;
 
-static cycle_t hpt_read(void)
+static cycle_t hpt_read(struct clocksource *cs)
 {
 	return read_c0_count2();
 }
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index f024057..f10a7cd 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -159,7 +159,7 @@
 	setup_irq(irq, &hub_rt_irqaction);
 }
 
-static cycle_t hub_rt_read(void)
+static cycle_t hub_rt_read(struct clocksource *cs)
 {
 	return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
 }
diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig
index 3aa8906..3acce23 100644
--- a/arch/mn10300/configs/asb2303_defconfig
+++ b/arch/mn10300/configs/asb2303_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Tue Feb 19 18:52:24 2008
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 11:13:22 2009
 #
 CONFIG_MN10300=y
 CONFIG_AM33=y
@@ -18,7 +18,6 @@
 CONFIG_GENERIC_BUG=y
 CONFIG_QUICKLIST=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_SUPPORTS_AOUT is not set
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HOTPLUG_CPU is not set
 CONFIG_HZ=1000
@@ -40,52 +39,58 @@
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
 
 #
 # Matsushita MN10300 system setup
@@ -107,7 +112,6 @@
 CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
 CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
 CONFIG_MN10300_CURRENT_IN_E2=y
 CONFIG_MN10300_USING_JTAG=y
 CONFIG_MN10300_RTC=y
@@ -135,13 +139,15 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=1
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # Power management options
@@ -152,11 +158,9 @@
 # Executable formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -194,8 +198,6 @@
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -203,6 +205,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -212,7 +215,9 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -223,14 +228,8 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -255,6 +254,7 @@
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -297,9 +297,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -319,14 +317,23 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 
 #
 # SCSI device support
@@ -334,7 +341,7 @@
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -345,10 +352,15 @@
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -358,6 +370,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -382,6 +398,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -403,6 +420,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -411,34 +429,43 @@
 # CONFIG_R3964 is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -453,21 +480,17 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -481,20 +504,23 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -506,19 +532,17 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -535,12 +559,16 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -548,26 +576,26 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-
-#
-# Profiling support
-#
+CONFIG_NLATTR=y
diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h
index 4fcf338..aa6a388 100644
--- a/arch/mn10300/include/asm/bug.h
+++ b/arch/mn10300/include/asm/bug.h
@@ -11,10 +11,12 @@
 #ifndef _ASM_BUG_H
 #define _ASM_BUG_H
 
+#ifdef CONFIG_BUG
+
 /*
  * Tell the user there is some problem.
  */
-#define _debug_bug_trap()					\
+#define BUG()							\
 do {								\
 	asm volatile(						\
 		"	syscall 15			\n"	\
@@ -25,11 +27,11 @@
 		:						\
 		: "i"(__FILE__), "i"(__LINE__)			\
 		);						\
-} while (0)
-
-#define BUG() _debug_bug_trap()
+} while (1)
 
 #define HAVE_ARCH_BUG
+#endif /* CONFIG_BUG */
+
 #include <asm-generic/bug.h>
 
 #endif /* _ASM_BUG_H */
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index 543a4f9..fef5b43 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -344,6 +344,8 @@
 #define __NR_dup3		331
 #define __NR_pipe2		332
 #define __NR_inotify_init1	333
+#define __NR_preadv		334
+#define __NR_pwritev		335
 
 #ifdef __KERNEL__
 
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 34ab5a2..3dc3e46 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -723,6 +723,8 @@
 	.long sys_dup3
 	.long sys_pipe2
 	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev		/* 335 */
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S
index 8a8309f..14f27f3 100644
--- a/arch/mn10300/kernel/head.S
+++ b/arch/mn10300/kernel/head.S
@@ -9,6 +9,7 @@
  * 2 of the Licence, or (at your option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <linux/linkage.h>
 #include <linux/serial_reg.h>
@@ -19,7 +20,7 @@
 #include <asm/param.h>
 #include <unit/serial.h>
 
-	.section .text.head,"ax"
+	__HEAD
 
 ###############################################################################
 #
diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 71414e1..79890ed 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -136,10 +136,6 @@
 	data_resource.start = virt_to_bus(&_etext);
 	data_resource.end = virt_to_bus(&_edata)-1;
 
-#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)	((x) << PAGE_SHIFT)
-
 	start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
 	kstart_pfn = PFN_UP(__pa(&_text));
 	free_pfn = PFN_UP(__pa(&_end));
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index b825966..24de6b9 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -27,10 +27,7 @@
   _stext = .;
   _text = .;			/* Text and read-only data */
   .text : {
-	*(
-	.text.head
-	.text
-	)
+	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5b50e1a..4c78045 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -462,7 +462,7 @@
 
 config PPC_256K_PAGES
 	bool "256k page size" if 44x
-	depends on !STDBINUTILS && (!SHMEM || BROKEN)
+	depends on !STDBINUTILS
 	help
 	  Make the page size 256k.
 
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index c63e356..d13cb11 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -293,4 +293,43 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xfe000000 0x02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <1>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "rootfs";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "u-boot";
+				reg = <0x01f00000 0x00060000>;
+			};
+			partition@1f60000 {
+				label = "u-boot-env";
+				reg = <0x01f60000 0x00020000>;
+			};
+			partition@1f80000 {
+				label = "dtb";
+				reg = <0x01f80000 0x00080000>;
+			};
+		};
+	};
+
 };
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 231bae7..b6f1fc6 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -84,9 +84,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 4356a1f..fa6a3d5 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -83,9 +83,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 19aa723..00f7ed7 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
@@ -247,7 +247,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 
 			mdio@520 {
 				#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 49145a0..673e4a7 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
@@ -247,7 +247,7 @@
 			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
+			phy-handle = <&phy4>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -275,7 +275,7 @@
 			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
-			phy-handle = <&phy4>;
+			phy-handle = <&phy5>;
 
 			mdio@520 {
 				#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 06d366e..6a99f1e 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -83,9 +83,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index feff915..b6c2d71 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -85,9 +85,9 @@
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
-			dtt@50 {
+			dtt@48 {
 				compatible = "national,lm75";
-				reg = <0x50>;
+				reg = <0x48>;
 			};
 
 			rtc@68 {
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 1239c61..3838b77 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:47:44 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -94,19 +96,22 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +141,6 @@
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,8 +161,6 @@
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -163,6 +168,7 @@
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -173,6 +179,8 @@
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -232,9 +240,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,7 +286,6 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +341,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -343,7 +354,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -440,7 +450,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -505,10 +514,12 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +548,8 @@
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -555,7 +568,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -657,7 +669,6 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -786,11 +797,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -831,7 +842,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -846,6 +856,7 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -853,6 +864,7 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -863,6 +875,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -885,6 +898,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -941,6 +959,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -953,7 +972,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1024,6 +1042,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1039,11 +1058,12 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1061,6 +1081,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1089,9 +1112,12 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1099,17 +1125,19 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1140,10 +1168,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1211,6 +1241,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index b7b8805..29b0f34 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:14 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:04 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -95,19 +97,22 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -117,10 +122,12 @@
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -128,6 +135,7 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -140,7 +148,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -161,8 +168,6 @@
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -170,6 +175,7 @@
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -180,6 +186,8 @@
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -241,9 +249,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +283,7 @@
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +306,6 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +361,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +374,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -412,6 +423,7 @@
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -477,9 +489,11 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -502,6 +516,7 @@
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -578,6 +593,7 @@
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -611,6 +627,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -632,6 +650,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -642,10 +661,10 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -655,6 +674,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -664,6 +684,7 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -671,7 +692,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -795,7 +815,6 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -876,7 +895,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -892,6 +911,7 @@
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -902,6 +922,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -924,6 +945,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -966,6 +992,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -978,7 +1005,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -994,6 +1020,7 @@
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1007,11 +1034,13 @@
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1029,6 +1058,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1057,9 +1089,12 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1067,17 +1102,19 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1108,10 +1145,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1180,6 +1219,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index fb10f22..07b6b26 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:29 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -94,19 +96,22 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +141,6 @@
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,8 +161,6 @@
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -163,6 +168,7 @@
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -173,6 +179,8 @@
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -233,9 +241,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -276,7 +287,6 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +342,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -344,7 +355,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -441,7 +451,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -466,6 +475,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -516,8 +526,10 @@
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -528,6 +540,7 @@
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -556,6 +569,8 @@
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -574,7 +589,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -665,7 +679,6 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -696,6 +709,7 @@
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -710,11 +724,14 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -800,7 +817,9 @@
 #
 # LED drivers
 #
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -810,6 +829,10 @@
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -866,8 +889,9 @@
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -878,6 +902,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -900,6 +925,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -956,6 +986,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -968,7 +999,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1039,6 +1069,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1054,11 +1085,12 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1076,6 +1108,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1104,9 +1139,12 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1114,17 +1152,19 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1155,10 +1195,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 
@@ -1226,6 +1268,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 00944c0..afb1a3d 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:33 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:42 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -69,6 +71,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -97,18 +100,18 @@
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -117,10 +120,12 @@
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,6 +134,7 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -141,7 +147,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,8 +167,6 @@
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -171,6 +174,7 @@
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 # CONFIG_PPC_MPC5200_BUGFIX is not set
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -181,6 +185,8 @@
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -242,9 +248,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +277,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -290,7 +300,6 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -340,6 +349,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -352,7 +362,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -451,7 +460,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -504,6 +512,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -580,6 +589,7 @@
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -613,6 +623,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -636,7 +648,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -702,6 +713,7 @@
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -767,7 +779,6 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -889,11 +900,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -934,7 +945,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -949,6 +959,7 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1007,8 +1018,9 @@
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1019,6 +1031,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1040,6 +1053,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1096,6 +1114,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1107,7 +1126,6 @@
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1162,6 +1180,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1177,11 +1196,11 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1200,13 +1219,25 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
 #
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_PRINT_STACK_DEPTH=64
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index 65237ad..8585c7c 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:57 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -94,19 +96,22 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -115,10 +120,12 @@
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -126,6 +133,7 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -138,7 +146,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,8 +166,6 @@
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -168,6 +173,7 @@
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_EFIKA is not set
 # CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_MPC5200_GPIO is not set
 # CONFIG_PPC_PMAC is not set
@@ -178,6 +184,8 @@
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -238,9 +246,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -281,7 +292,6 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -337,6 +347,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -349,7 +360,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -447,7 +457,6 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -514,8 +523,10 @@
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -527,6 +538,7 @@
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -555,6 +567,8 @@
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -573,7 +587,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -675,7 +688,6 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -706,6 +718,7 @@
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -720,11 +733,14 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -857,11 +873,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -902,7 +918,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -917,6 +932,7 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -976,8 +992,9 @@
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -988,6 +1005,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1010,6 +1028,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1066,6 +1089,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1078,7 +1102,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1149,6 +1172,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1164,11 +1188,12 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1186,6 +1211,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1214,9 +1242,12 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1224,17 +1255,19 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1265,10 +1298,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1337,6 +1372,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
deleted file mode 100644
index f6fa0b7..0000000
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ /dev/null
@@ -1,1802 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:07 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
deleted file mode 100644
index 186c101..0000000
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ /dev/null
@@ -1,1309 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:10 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
deleted file mode 100644
index 813223a..0000000
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ /dev/null
@@ -1,1794 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:12 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 0bc4597..43030fe 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.29-rc7
+# Mon Mar 16 09:03:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -75,6 +76,15 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -152,11 +162,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -202,7 +207,7 @@
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -244,6 +249,7 @@
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +265,7 @@
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
 CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
@@ -284,10 +291,11 @@
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
@@ -363,12 +371,7 @@
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,27 +474,18 @@
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
+CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
@@ -515,69 +509,21 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
@@ -650,7 +596,7 @@
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
-CONFIG_E1000=y
+# CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
@@ -668,6 +614,7 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -835,8 +782,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -975,26 +920,7 @@
 # Special HID drivers
 #
 CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1064,16 +990,9 @@
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
 # CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -1122,8 +1041,17 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1184,6 +1112,8 @@
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
@@ -1219,6 +1149,7 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
@@ -1236,6 +1167,7 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index af0cd55..aaa4416 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Feb  6 09:48:53 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon Apr 20 11:06:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -14,6 +14,7 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
@@ -39,6 +40,7 @@
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -55,6 +57,7 @@
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -91,19 +94,22 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -113,10 +119,12 @@
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,6 +132,7 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -136,7 +145,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,8 +165,6 @@
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -166,8 +172,9 @@
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_EFIKA=y
 CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MEDIA5200=y
 CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_MPC5200_GPIO is not set
+CONFIG_PPC_MPC5200_GPIO=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -176,7 +183,9 @@
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
 CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -241,9 +250,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +284,7 @@
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +307,6 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +362,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -362,7 +375,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -388,12 +400,9 @@
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -447,6 +456,8 @@
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -465,14 +476,23 @@
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -500,12 +520,14 @@
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
 # EEPROM support
 #
 CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
@@ -564,9 +586,11 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -589,6 +613,7 @@
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -666,6 +691,7 @@
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -699,6 +725,9 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -722,7 +751,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -802,6 +830,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
@@ -854,6 +883,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -883,22 +913,63 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MPC52xx_PSC=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -915,10 +986,12 @@
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -929,11 +1002,16 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -952,6 +1030,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -989,6 +1068,7 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
@@ -1084,9 +1164,13 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_GENERIC=y
@@ -1127,15 +1211,17 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 # CONFIG_HID_APPLE is not set
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 # CONFIG_HID_CHICONY is not set
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
@@ -1204,11 +1290,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1250,7 +1336,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1265,6 +1350,8 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1317,6 +1404,13 @@
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1336,8 +1430,9 @@
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1348,6 +1443,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1370,6 +1466,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1416,6 +1517,12 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1426,6 +1533,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1438,7 +1546,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1493,6 +1600,7 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1500,7 +1608,7 @@
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1508,11 +1616,14 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1530,6 +1641,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1558,9 +1672,12 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1568,17 +1685,19 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1609,10 +1728,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1680,8 +1801,9 @@
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
 
 #
 # Random Number Generation
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index fb08819..c162724 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:37 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:40:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,6 +22,7 @@
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
@@ -59,6 +60,7 @@
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -73,11 +75,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,22 +105,24 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -118,10 +132,12 @@
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,6 +146,7 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -142,7 +159,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,11 +174,6 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -178,8 +189,9 @@
 CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
-# CONFIG_STX_GP3 is not set
+CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
 CONFIG_TQM8548=y
@@ -200,11 +212,11 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
+CONFIG_QE_GPIO=y
 CONFIG_CPM2=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_MPC8xxx_GPIO=y
 # CONFIG_SIMPLE_GPIO is not set
 
 #
@@ -249,9 +261,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -278,6 +293,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -291,17 +307,17 @@
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -389,6 +405,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -401,7 +418,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -456,13 +472,20 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -521,9 +544,11 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -546,6 +571,7 @@
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -622,6 +648,7 @@
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -634,11 +661,11 @@
 #
 # MII PHY device drivers
 #
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
@@ -647,7 +674,7 @@
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -655,6 +682,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -667,7 +696,10 @@
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_ATL2 is not set
-# CONFIG_FS_ENET is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -675,6 +707,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -685,11 +718,15 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -699,6 +736,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -708,6 +746,7 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -715,7 +754,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,14 +851,15 @@
 # CONFIG_SERIAL_CPM is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
+CONFIG_SERIAL_QE=m
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -857,7 +896,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_I2C_CPM is not set
+CONFIG_I2C_CPM=m
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -885,12 +924,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -969,7 +1005,7 @@
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -978,6 +1014,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -1017,103 +1054,7 @@
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1193,6 +1134,8 @@
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1247,15 +1190,17 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1314,6 +1259,7 @@
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
@@ -1329,11 +1275,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1375,7 +1321,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1392,6 +1337,7 @@
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1406,6 +1352,8 @@
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1460,7 +1408,7 @@
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
 
 #
@@ -1473,7 +1421,9 @@
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1484,6 +1434,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1508,6 +1459,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1562,6 +1518,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1577,7 +1534,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1648,6 +1604,10 @@
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1662,11 +1622,12 @@
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1684,6 +1645,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1714,9 +1678,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1724,17 +1691,20 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1759,18 +1729,21 @@
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1837,6 +1810,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1845,7 +1819,7 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
similarity index 90%
rename from arch/powerpc/configs/85xx/mpc8536_ds_defconfig
rename to arch/powerpc/configs/mpc85xx_smp_defconfig
index e31b6a4..1aa1c50 100644
--- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:04 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:41:18 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -22,8 +22,10 @@
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -43,6 +45,7 @@
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -52,19 +55,20 @@
 CONFIG_PPC_OF=y
 CONFIG_OF=y
 CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
@@ -72,11 +76,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,22 +106,24 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -117,10 +133,12 @@
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +146,9 @@
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -138,9 +159,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,11 +177,6 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -170,25 +186,27 @@
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8560_ADS=y
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
+CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
+CONFIG_KSI8560=y
+CONFIG_STX_GP3=y
+CONFIG_TQM8540=y
+CONFIG_TQM8541=y
+CONFIG_TQM8548=y
+CONFIG_TQM8555=y
+CONFIG_TQM8560=y
+CONFIG_SBC8548=y
 # CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_I8259=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 # CONFIG_PPC_MPC106 is not set
@@ -196,10 +214,12 @@
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_MPC8xxx_GPIO=y
 # CONFIG_SIMPLE_GPIO is not set
 
 #
@@ -228,6 +248,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -244,9 +265,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +283,7 @@
 # Bus options
 #
 CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
@@ -272,6 +297,7 @@
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -285,17 +311,17 @@
 # Default settings for advanced configuration options are used
 #
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -383,6 +409,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -395,7 +422,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
@@ -426,6 +452,7 @@
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -442,20 +469,27 @@
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=524288
+CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -514,9 +548,11 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
@@ -539,11 +575,12 @@
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
@@ -554,13 +591,13 @@
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
+CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
@@ -615,6 +652,7 @@
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -627,11 +665,11 @@
 #
 # MII PHY device drivers
 #
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
@@ -640,7 +678,7 @@
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -648,6 +686,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -660,6 +700,10 @@
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -667,22 +711,26 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -692,6 +740,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -701,6 +750,7 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -708,7 +758,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -803,8 +852,10 @@
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=m
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -812,7 +863,8 @@
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -848,6 +900,8 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+CONFIG_I2C_CPM=m
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -874,12 +928,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -888,11 +939,36 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-CONFIG_THERMAL=y
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -907,6 +983,8 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
@@ -931,7 +1009,7 @@
 #
 # CONFIG_MEDIA_ATTACH is not set
 CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
 CONFIG_MEDIA_TUNER_TDA9887=m
@@ -940,6 +1018,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 # CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
@@ -979,103 +1058,7 @@
 #
 # Supported DVB Frontends
 #
-
-#
-# Customise DVB Frontends
-#
 # CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -1101,16 +1084,18 @@
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
@@ -1153,6 +1138,8 @@
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1207,15 +1194,17 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1274,10 +1263,12 @@
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1288,11 +1279,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1334,7 +1325,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1350,13 +1340,24 @@
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1411,7 +1412,7 @@
 #
 # on-CPU RTC drivers
 #
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
 
 #
@@ -1424,7 +1425,9 @@
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1435,6 +1438,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1459,6 +1463,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1513,6 +1522,7 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1528,7 +1538,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1599,6 +1608,10 @@
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1613,11 +1626,12 @@
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
@@ -1635,6 +1649,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1665,9 +1682,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1675,23 +1695,26 @@
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRQ_DEBUG=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1717,10 +1740,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1789,6 +1814,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1798,5 +1824,6 @@
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 1a856b1..087c22f 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -258,7 +258,8 @@
 # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
 		(exec_stk != EXSTACK_DISABLE_X) : 0)
 #else 
-# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+# define SET_PERSONALITY(ex) \
+  set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 #endif /* __powerpc64__ */
 
 extern int dcache_bsize;
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 6d406c5..9696cc3 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -27,7 +27,7 @@
 	PPC_LONG "1b,4b,2b,4b\n" \
 	".previous" \
 	: "=&r" (oldval), "=&r" (ret) \
-	: "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+	: "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
 	: "cr0", "memory")
 
 static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
@@ -47,19 +47,19 @@
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index cbf1543..86d2366 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -52,6 +52,12 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
+/* This indicates that the processor uses the wrong opcode for tlbilx
+ * instructions.  During the ISA 2.06 development the opcode for tlbilx
+ * changed and some early implementations used to old opcode
+ */
+#define MMU_FTR_TLBILX_EARLY_OPCODE	ASM_CONST(0x00400000)
+
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index f4a4db8..ef4da37 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -43,7 +43,8 @@
 
 #define PPC_INST_STSWI			0x7c0005aa
 #define PPC_INST_STSWX			0x7c00052a
-#define PPC_INST_TLBILX			0x7c000626
+#define PPC_INST_TLBILX			0x7c000024
+#define PPC_INST_TLBILX_EARLY		0x7c000626
 #define PPC_INST_WAIT			0x7c00007c
 
 /* macros to insert fields into opcodes */
@@ -63,10 +64,18 @@
 #define PPC_RFDI		stringify_in_c(.long PPC_INST_RFDI)
 #define PPC_RFMCI		stringify_in_c(.long PPC_INST_RFMCI)
 #define PPC_TLBILX(t, a, b)	stringify_in_c(.long PPC_INST_TLBILX | \
-					__PPC_T_TLB(t) | __PPC_RA(a) | __PPC_RB(b))
+					__PPC_T_TLB(t) | \
+					__PPC_RA(a) | __PPC_RB(b))
 #define PPC_TLBILX_ALL(a, b)	PPC_TLBILX(0, a, b)
 #define PPC_TLBILX_PID(a, b)	PPC_TLBILX(1, a, b)
 #define PPC_TLBILX_VA(a, b)	PPC_TLBILX(3, a, b)
+
+#define PPC_TLBILX_EARLY(t, a, b) stringify_in_c(.long PPC_INST_TLBILX_EARLY | \
+						__PPC_T_TLB(t) | \
+						__PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBILX_ALL_EARLY(a, b)	PPC_TLBILX_EARLY(0, a, b)
+#define PPC_TLBILX_PID_EARLY(a, b)	PPC_TLBILX_EARLY(1, a, b)
+#define PPC_TLBILX_VA_EARLY(a, b)	PPC_TLBILX_EARLY(3, a, b)
 #define PPC_WAIT(w)		stringify_in_c(.long PPC_INST_WAIT | \
 					__PPC_WC(w))
 
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cd1b687..57db50f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1766,7 +1766,7 @@
 		.cpu_features		= CPU_FTRS_E500MC,
 		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
 		.mmu_features		= MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
-			MMU_FTR_USE_TLBILX,
+			MMU_FTR_USE_TLBILX | MMU_FTR_TLBILX_EARLY_OPCODE,
 		.icache_bsize		= 64,
 		.dcache_bsize		= 64,
 		.num_pmcs		= 4,
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 54e68c1..c01467f 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -21,6 +21,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/reg.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -50,7 +51,7 @@
 	mtspr	SPRN_DBAT##n##L,RB;	\
 1:
 
-	.section	.text.head, "ax"
+	__HEAD
 	.stabs	"arch/powerpc/kernel/",N_SO,0,0,0f
 	.stabs	"head_32.S",N_SO,0,0,0f
 0:
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 56d8e5d..0c96911 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -31,6 +31,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -52,7 +53,7 @@
  *
  * This is all going to change RSN when we add bi_recs.......  -- Dan
  */
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b56fecc..18d8a16 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -28,6 +28,7 @@
  * option) any later version.
  */
 
+#include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -50,7 +51,7 @@
  *   r7 - End of kernel command line string
  *
  */
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 	/*
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 3c9452d..52ff8c5 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -19,6 +19,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
@@ -38,7 +39,7 @@
 #else
 #define DO_8xx_CPU6(val, reg)
 #endif
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 4c22620..5bdcc06 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -30,6 +30,7 @@
  * option) any later version.
  */
 
+#include <linux/init.h>
 #include <linux/threads.h>
 #include <asm/processor.h>
 #include <asm/page.h>
@@ -53,7 +54,7 @@
  *   r7 - End of kernel command line string
  *
  */
-	.section	.text.head, "ax"
+	__HEAD
 _ENTRY(_stext);
 _ENTRY(_start);
 	/*
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 8f0856f..8362620 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -971,7 +971,7 @@
 	struct device_node *p;
 	const u32 *intspec, *tmp, *addr;
 	u32 intsize, intlen;
-	int res;
+	int res = -EINVAL;
 
 	DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
 
@@ -995,21 +995,20 @@
 
 	/* Get size of interrupt specifier */
 	tmp = of_get_property(p, "#interrupt-cells", NULL);
-	if (tmp == NULL) {
-		of_node_put(p);
-		return -EINVAL;
-	}
+	if (tmp == NULL)
+		goto out;
 	intsize = *tmp;
 
 	DBG(" intsize=%d intlen=%d\n", intsize, intlen);
 
 	/* Check index */
 	if ((index + 1) * intsize > intlen)
-		return -EINVAL;
+		goto out;
 
 	/* Get new specifier and map it */
 	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
 			     addr, out_irq);
+out:
 	of_node_put(p);
 	return res;
 }
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 926ea86..48571ac 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -77,7 +77,7 @@
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
 
-static cycle_t rtc_read(void);
+static cycle_t rtc_read(struct clocksource *);
 static struct clocksource clocksource_rtc = {
 	.name         = "rtc",
 	.rating       = 400,
@@ -88,7 +88,7 @@
 	.read         = rtc_read,
 };
 
-static cycle_t timebase_read(void);
+static cycle_t timebase_read(struct clocksource *);
 static struct clocksource clocksource_timebase = {
 	.name         = "timebase",
 	.rating       = 400,
@@ -766,12 +766,12 @@
 }
 
 /* clocksource code */
-static cycle_t rtc_read(void)
+static cycle_t rtc_read(struct clocksource *cs)
 {
 	return (cycle_t)get_rtc();
 }
 
-static cycle_t timebase_read(void)
+static cycle_t timebase_read(struct clocksource *cs)
 {
 	return (cycle_t)get_tb();
 }
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index b9ef164..d7425ff 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -52,7 +52,7 @@
 	/* Text and gots */
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		ALIGN_FUNCTION();
-		*(.text.head)
+		HEAD_TEXT
 		_text = .;
 		*(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
 		SCHED_TEXT
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index db556d2..1ade7eb 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -753,7 +753,7 @@
 }
 
 #ifdef CONFIG_SMP
-void __init early_init_mmu_secondary(void)
+void __cpuinit early_init_mmu_secondary(void)
 {
 	/* Initialize hash table for that CPU */
 	if (!firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 7af7297..ad2eb4d 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -125,7 +125,6 @@
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t cpu_mask;
 	unsigned int pid;
 
 	preempt_disable();
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 788b87c..45fed36 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -138,7 +138,11 @@
 	andi.	r3,r3,MMUCSR0_TLBFI@l
 	bne	1b
 MMU_FTR_SECTION_ELSE
-	PPC_TLBILX_ALL(0,0)
+  BEGIN_MMU_FTR_SECTION_NESTED(96)
+	PPC_TLBILX_ALL(0,r3)
+  MMU_FTR_SECTION_ELSE_NESTED(96)
+	PPC_TLBILX_ALL_EARLY(0,r3)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
@@ -151,7 +155,11 @@
 	wrteei	0
 	mfspr	r4,SPRN_MAS6	/* save MAS6 */
 	mtspr	SPRN_MAS6,r3
+  BEGIN_MMU_FTR_SECTION_NESTED(96)
 	PPC_TLBILX_PID(0,0)
+  MMU_FTR_SECTION_ELSE_NESTED(96)
+	PPC_TLBILX_PID_EARLY(0,0)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 	mtspr	SPRN_MAS6,r4	/* restore MAS6 */
 	wrtee	r10
 MMU_FTR_SECTION_ELSE
@@ -185,7 +193,11 @@
 	mtspr	SPRN_MAS1,r4
 	tlbwe
 MMU_FTR_SECTION_ELSE
+  BEGIN_MMU_FTR_SECTION_NESTED(96)
 	PPC_TLBILX_VA(0,r3)
+  MMU_FTR_SECTION_ELSE_NESTED(96)
+	PPC_TLBILX_VA_EARLY(0,r3)
+  ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_TLBILX_EARLY_OPCODE, 96)
 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	msync
 	isync
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 1db6b9e..65a35f3 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -275,11 +275,6 @@
 	if (!machine_is(mpc86xx_hpcd))
 		return;
 
-	/* Interrupt Disable, Needed when SATA disabled */
-	pci_read_config_word(dev, PCI_COMMAND, &temp);
-	temp |= 1<<10;
-	pci_write_config_word(dev, PCI_COMMAND, temp);
-
 	pci_read_config_byte(dev, 0x83, &c);
 	c |= 0x80;
 	pci_write_config_byte(dev, 0x83, c);
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index c64fb5b..153051e 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -44,10 +44,6 @@
 
 #include "pasemi.h"
 
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
 /* SDC reset register, must be pre-mapped at reset time */
 static void __iomem *reset_reg;
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index 86e392b1..cf1cd0f 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -578,7 +578,7 @@
  *
  */
 
-static void update_flash_db(void)
+static void __maybe_unused update_flash_db(void)
 {
 	int result;
 	int file;
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index fafcaa0..ab69925 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -25,6 +25,7 @@
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/firmware.h>
 
 #include "plpar_wrappers.h"
 
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 380420f..9a2a6e3 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -182,6 +182,8 @@
 	if (!driver)
 		return;
 
+	dev->error_state = pci_channel_io_normal;
+
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index a0fa4eb..abdb124 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -18,6 +18,7 @@
 #include <linux/types.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include <linux/rio.h>
 #include <linux/rio_drv.h>
 #include <linux/of_platform.h>
@@ -159,6 +160,7 @@
 };
 
 struct rio_priv {
+	struct device *dev;
 	void __iomem *regs_win;
 	struct rio_atmu_regs __iomem *atmu_regs;
 	struct rio_atmu_regs __iomem *maint_atmu_regs;
@@ -484,13 +486,13 @@
 
 	for (i = 0; i < priv->msg_tx_ring.size; i++) {
 		priv->msg_tx_ring.virt_buffer[i] =
-			dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+			dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
 		if (!priv->msg_tx_ring.virt_buffer[i]) {
 			rc = -ENOMEM;
 			for (j = 0; j < priv->msg_tx_ring.size; j++)
 				if (priv->msg_tx_ring.virt_buffer[j])
-					dma_free_coherent(NULL,
+					dma_free_coherent(priv->dev,
 							RIO_MSG_BUFFER_SIZE,
 							priv->msg_tx_ring.
 							virt_buffer[j],
@@ -501,7 +503,7 @@
 	}
 
 	/* Initialize outbound message descriptor ring */
-	priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+	priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
 				priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 				&priv->msg_tx_ring.phys, GFP_KERNEL);
 	if (!priv->msg_tx_ring.virt) {
@@ -549,12 +551,13 @@
 	return rc;
 
       out_irq:
-	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+	dma_free_coherent(priv->dev,
+			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
 
       out_dma:
 	for (i = 0; i < priv->msg_tx_ring.size; i++)
-		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				  priv->msg_tx_ring.virt_buffer[i],
 				  priv->msg_tx_ring.phys_buffer[i]);
 
@@ -576,7 +579,8 @@
 	out_be32(&priv->msg_regs->omr, 0);
 
 	/* Free ring */
-	dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+	dma_free_coherent(priv->dev,
+			  priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
 			  priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
 
 	/* Free interrupt */
@@ -654,7 +658,7 @@
 		priv->msg_rx_ring.virt_buffer[i] = NULL;
 
 	/* Initialize inbound message ring */
-	priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+	priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
 				priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
 				&priv->msg_rx_ring.phys, GFP_KERNEL);
 	if (!priv->msg_rx_ring.virt) {
@@ -673,7 +677,7 @@
 	rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
 			 "msg_rx", (void *)mport);
 	if (rc < 0) {
-		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+		dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
 				  priv->msg_tx_ring.virt_buffer[i],
 				  priv->msg_tx_ring.phys_buffer[i]);
 		goto out;
@@ -713,7 +717,7 @@
 	out_be32(&priv->msg_regs->imr, 0);
 
 	/* Free ring */
-	dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+	dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
 			  priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
 
 	/* Free interrupt */
@@ -890,7 +894,7 @@
 	}
 
 	/* Initialize inbound doorbells */
-	priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+	priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
 		    DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
 	if (!priv->dbell_ring.virt) {
 		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
@@ -911,7 +915,7 @@
 			 "dbell_rx", (void *)mport);
 	if (rc < 0) {
 		iounmap(priv->dbell_win);
-		dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+		dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
 				  priv->dbell_ring.virt, priv->dbell_ring.phys);
 		printk(KERN_ERR
 		       "MPC85xx RIO: unable to request inbound doorbell irq");
@@ -1087,6 +1091,8 @@
 	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
 	strcpy(port->name, "RIO0 mport");
 
+	priv->dev = &dev->dev;
+
 	port->ops = ops;
 	port->host_deviceid = fsl_rio_get_hdid(port->id);
 
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 27b70d8..1dfc710 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -98,7 +98,7 @@
 /*
  * Ops list
  */
-static DEFINE_SPINLOCK(appldata_ops_lock);
+static DEFINE_MUTEX(appldata_ops_mutex);
 static LIST_HEAD(appldata_ops_list);
 
 
@@ -129,14 +129,14 @@
 
 	i = 0;
 	get_online_cpus();
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_for_each(lh, &appldata_ops_list) {
 		ops = list_entry(lh, struct appldata_ops, list);
 		if (ops->active == 1) {
 			ops->callback(ops->data);
 		}
 	}
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 	put_online_cpus();
 }
 
@@ -176,7 +176,7 @@
 		struct vtimer_list *timer;
 		u64    expires;
 	} *args = p;
-	mod_virt_timer(args->timer, args->expires);
+	mod_virt_timer_periodic(args->timer, args->expires);
 }
 
 #define APPLDATA_ADD_TIMER	0
@@ -338,7 +338,7 @@
 	struct list_head *lh;
 
 	found = 0;
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_for_each(lh, &appldata_ops_list) {
 		tmp_ops = list_entry(lh, struct appldata_ops, list);
 		if (&tmp_ops->ctl_table[2] == ctl) {
@@ -346,15 +346,15 @@
 		}
 	}
 	if (!found) {
-		spin_unlock(&appldata_ops_lock);
+		mutex_unlock(&appldata_ops_mutex);
 		return -ENODEV;
 	}
 	ops = ctl->data;
 	if (!try_module_get(ops->owner)) {	// protect this function
-		spin_unlock(&appldata_ops_lock);
+		mutex_unlock(&appldata_ops_mutex);
 		return -ENODEV;
 	}
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 
 	if (!*lenp || *ppos) {
 		*lenp = 0;
@@ -378,11 +378,11 @@
 		return -EFAULT;
 	}
 
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	if ((buf[0] == '1') && (ops->active == 0)) {
 		// protect work queue callback
 		if (!try_module_get(ops->owner)) {
-			spin_unlock(&appldata_ops_lock);
+			mutex_unlock(&appldata_ops_mutex);
 			module_put(ops->owner);
 			return -ENODEV;
 		}
@@ -407,7 +407,7 @@
 			       "failed with rc=%d\n", ops->name, rc);
 		module_put(ops->owner);
 	}
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 out:
 	*lenp = len;
 	*ppos += len;
@@ -433,9 +433,9 @@
 	if (!ops->ctl_table)
 		return -ENOMEM;
 
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_add(&ops->list, &appldata_ops_list);
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 
 	ops->ctl_table[0].procname = appldata_proc_name;
 	ops->ctl_table[0].maxlen   = 0;
@@ -452,9 +452,9 @@
 		goto out;
 	return 0;
 out:
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_del(&ops->list);
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 	kfree(ops->ctl_table);
 	return -ENOMEM;
 }
@@ -466,9 +466,9 @@
  */
 void appldata_unregister_ops(struct appldata_ops *ops)
 {
-	spin_lock(&appldata_ops_lock);
+	mutex_lock(&appldata_ops_mutex);
 	list_del(&ops->list);
-	spin_unlock(&appldata_ops_lock);
+	mutex_unlock(&appldata_ops_mutex);
 	unregister_sysctl_table(ops->sysctl_header);
 	kfree(ops->ctl_table);
 }
diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c
index 3ed56b7..4188cbe 100644
--- a/arch/s390/appldata/appldata_mem.c
+++ b/arch/s390/appldata/appldata_mem.c
@@ -78,7 +78,7 @@
 {
 	/*
 	 * don't put large structures on the stack, we are
-	 * serialized through the appldata_ops_lock and can use static
+	 * serialized through the appldata_ops_mutex and can use static
 	 */
 	static struct sysinfo val;
 	unsigned long ev[NR_VM_EVENT_ITEMS];
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 31e809c..d401d56 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Wed Feb 11 10:07:16 2009
+# Linux kernel version: 2.6.30-rc3
+# Thu Apr 23 09:29:52 2009
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -22,6 +22,7 @@
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_PGSTE=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_S390=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -37,6 +38,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
@@ -77,21 +79,24 @@
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -99,10 +104,12 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_HAVE_SYSCALL_WRAPPERS=y
@@ -111,6 +118,8 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +133,6 @@
 CONFIG_INIT_ALL_POSSIBLE=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -211,11 +219,12 @@
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 
 #
 # I/O subsystem configuration
 #
-CONFIG_MACHCHK_WARNING=y
 CONFIG_QDIO=y
 CONFIG_CHSC_SCH=m
 
@@ -247,12 +256,12 @@
 CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
 CONFIG_S390_GUEST=y
+CONFIG_SECCOMP=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -374,6 +383,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -438,7 +448,6 @@
 CONFIG_CAN_VCAN=m
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -537,6 +546,7 @@
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
 CONFIG_SCSI_DH=m
@@ -544,6 +554,10 @@
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m
 CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_AUTODETECT=y
@@ -564,6 +578,7 @@
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -667,6 +682,7 @@
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_ACCESSIBILITY=y
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_STAGING is not set
 
 #
@@ -676,6 +692,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -701,6 +718,11 @@
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -744,6 +766,8 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_EXOFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -758,7 +782,6 @@
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -806,6 +829,7 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -830,7 +854,6 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -840,7 +863,9 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -850,14 +875,17 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 
 #
 # Security options
@@ -882,10 +910,12 @@
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG=m
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_TEST is not set
@@ -954,6 +984,7 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 
 #
@@ -969,6 +1000,7 @@
 # CONFIG_CRYPTO_DES_S390 is not set
 # CONFIG_CRYPTO_AES_S390 is not set
 CONFIG_S390_PRNG=m
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -982,9 +1014,14 @@
 CONFIG_CRC32=m
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_NLATTR=y
 CONFIG_HAVE_KVM=y
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h
new file mode 100644
index 0000000..07836a2
--- /dev/null
+++ b/arch/s390/include/asm/cpuid.h
@@ -0,0 +1,25 @@
+/*
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Hartmut Penner <hp@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		 Christian Ehrhardt <ehrhardt@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPUID_H_
+#define _ASM_S390_CPUID_H_
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+typedef struct
+{
+	unsigned int version :	8;
+	unsigned int ident   : 24;
+	unsigned int machine : 16;
+	unsigned int unused  : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+#endif /* _ASM_S390_CPUID_H_ */
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 95b0f7d..941384f 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -174,4 +174,8 @@
        return __div(cputime, 4096000000ULL / USER_HZ);
 }
 
+cputime64_t s390_get_idle_time(int cpu);
+
+#define arch_idle_time(cpu) s390_get_idle_time(cpu)
+
 #endif /* _S390_CPUTIME_H */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index c6e674f..54ea39f 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -15,6 +15,7 @@
 #define ASM_KVM_HOST_H
 #include <linux/kvm_host.h>
 #include <asm/debug.h>
+#include <asm/cpuid.h>
 
 #define KVM_MAX_VCPUS 64
 #define KVM_MEMORY_SLOTS 32
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index b349f1c..3aeca49 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -66,6 +66,7 @@
 #define __LC_USER_EXEC_ASCE		0x02ac
 #define __LC_CPUID			0x02b0
 #define __LC_INT_CLOCK			0x02c8
+#define __LC_MACHINE_FLAGS		0x02d8
 #define __LC_IRB			0x0300
 #define __LC_PFAULT_INTPARM		0x0080
 #define __LC_CPU_TIMER_SAVE_AREA	0x00d8
@@ -110,6 +111,7 @@
 #define __LC_CPUID			0x0320
 #define __LC_INT_CLOCK			0x0340
 #define __LC_VDSO_PER_CPU		0x0350
+#define __LC_MACHINE_FLAGS		0x0358
 #define __LC_IRB			0x0380
 #define __LC_PASTE			0x03c0
 #define __LC_PFAULT_INTPARM		0x11b8
@@ -127,9 +129,9 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/processor.h>
+#include <asm/cpuid.h>
+#include <asm/ptrace.h>
 #include <linux/types.h>
-#include <asm/sigp.h>
 
 void restart_int_handler(void);
 void ext_int_handler(void);
@@ -277,7 +279,8 @@
 	__u32	ext_call_fast;			/* 0x02c4 */
 	__u64	int_clock;			/* 0x02c8 */
 	__u64	clock_comparator;		/* 0x02d0 */
-	__u8	pad_0x02d8[0x0300-0x02d8];	/* 0x02d8 */
+	__u32	machine_flags;			/* 0x02d8 */
+	__u8	pad_0x02dc[0x0300-0x02dc];	/* 0x02dc */
 
 	/* Interrupt response block */
 	__u8	irb[64];			/* 0x0300 */
@@ -381,7 +384,8 @@
 	__u64	int_clock;			/* 0x0340 */
 	__u64	clock_comparator;		/* 0x0348 */
 	__u64	vdso_per_cpu_data;		/* 0x0350 */
-	__u8	pad_0x0358[0x0380-0x0358];	/* 0x0358 */
+	__u64	machine_flags;			/* 0x0358 */
+	__u8	pad_0x0360[0x0380-0x0360];	/* 0x0360 */
 
 	/* Interrupt response block. */
 	__u8	irb[64];			/* 0x0380 */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 61862b3..c139fa7 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -14,7 +14,10 @@
 #define __ASM_S390_PROCESSOR_H
 
 #include <linux/linkage.h>
+#include <asm/cpuid.h>
+#include <asm/page.h>
 #include <asm/ptrace.h>
+#include <asm/setup.h>
 
 #ifdef __KERNEL__
 /*
@@ -23,20 +26,6 @@
  */
 #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
 
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-typedef struct
-{
-        unsigned int version :  8;
-        unsigned int ident   : 24;
-        unsigned int machine : 16;
-        unsigned int unused  : 16;
-} __attribute__ ((packed)) cpuid_t;
-
 static inline void get_cpu_id(cpuid_t *ptr)
 {
 	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index f1b0516..539263f 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -313,8 +313,6 @@
 
 
 #ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
 
 /*
  * The pt_regs struct defines the way the registers are stored on
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index e8bd6ac..38b0fc2 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -14,6 +14,7 @@
 
 #ifdef __KERNEL__
 
+#include <asm/lowcore.h>
 #include <asm/types.h>
 
 #define PARMAREA		0x10400
@@ -63,7 +64,6 @@
 /*
  * Machine features detected in head.S
  */
-extern unsigned long machine_flags;
 
 #define MACHINE_FLAG_VM		(1UL << 0)
 #define MACHINE_FLAG_IEEE	(1UL << 1)
@@ -77,28 +77,28 @@
 #define MACHINE_FLAG_HPAGE	(1UL << 10)
 #define MACHINE_FLAG_PFMF	(1UL << 11)
 
-#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
+#define MACHINE_IS_VM		(S390_lowcore.machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM		(S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C	(S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
 
 #ifndef __s390x__
-#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IEEE	(S390_lowcore.machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP		(S390_lowcore.machine_flags & MACHINE_FLAG_CSP)
 #define MACHINE_HAS_IDTE	(0)
 #define MACHINE_HAS_DIAG44	(1)
-#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVPG	(S390_lowcore.machine_flags & MACHINE_FLAG_MVPG)
 #define MACHINE_HAS_MVCOS	(0)
 #define MACHINE_HAS_HPAGE	(0)
 #define MACHINE_HAS_PFMF	(0)
 #else /* __s390x__ */
 #define MACHINE_HAS_IEEE	(1)
 #define MACHINE_HAS_CSP		(1)
-#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_IDTE	(S390_lowcore.machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44	(S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44)
 #define MACHINE_HAS_MVPG	(1)
-#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
+#define MACHINE_HAS_MVCOS	(S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE	(S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF	(S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
 #endif /* __s390x__ */
 
 #define ZFCPDUMP_HSA_SIZE	(32UL<<20)
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index c544aa5..461f2ab 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -31,8 +31,9 @@
 #define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
 
 #ifndef __ASSEMBLY__
-#include <asm/processor.h>
 #include <asm/lowcore.h>
+#include <asm/page.h>
+#include <asm/processor.h>
 
 /*
  * low level task data that entry.S needs immediate access to
diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h
index e4bcab7..814243c 100644
--- a/arch/s390/include/asm/timer.h
+++ b/arch/s390/include/asm/timer.h
@@ -41,6 +41,7 @@
 extern void add_virt_timer(void *new);
 extern void add_virt_timer_periodic(void *new);
 extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires);
 extern int del_virt_timer(struct vtimer_list *timer);
 
 extern void init_cpu_vtimer(void);
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index d744c3d..cc21e3e 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -11,6 +11,9 @@
 #ifndef _ASM_S390_TIMEX_H
 #define _ASM_S390_TIMEX_H
 
+/* The value of the TOD clock for 1.1.1970. */
+#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+
 /* Inline functions for clock register access. */
 static inline int set_clock(__u64 time)
 {
@@ -85,4 +88,6 @@
 void init_cpu_timer(void);
 unsigned long long monotonic_clock(void);
 
+extern u64 sched_clock_base_cc;
+
 #endif
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index c8ad350..f0f19e6 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -265,7 +265,9 @@
 #define __NR_pipe2		325
 #define __NR_dup3		326
 #define __NR_epoll_create1	327
-#define NR_syscalls 328
+#define	__NR_preadv		328
+#define	__NR_pwritev		329
+#define NR_syscalls 330
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 67a6001..fa9905c 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -27,6 +27,8 @@
 	DEFINE(__TI_flags, offsetof(struct thread_info, flags));
 	DEFINE(__TI_cpu, offsetof(struct thread_info, cpu));
 	DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
+	DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
+	DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
 	BLANK();
 	DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
 	DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 6cc87d8..002c70d 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -702,20 +702,12 @@
 				struct stat64_emu31 __user* statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_stat64(statbuf, &stat);
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_stat64(statbuf, &stat);
 }
 
 /*
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 87cf5a7..fb38af6 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1805,3 +1805,21 @@
 	llgfr	%r5,%r5			# u32
 	llgfr	%r6,%r6			# u32
 	jg	compat_sys_keyctl	# branch to system call
+
+	.globl	compat_sys_preadv_wrapper
+compat_sys_preadv_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned long
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_preadv	# branch to system call
+
+	.globl	compat_sys_pwritev_wrapper
+compat_sys_pwritev_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned long
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_pwritev	# branch to system call
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 4d221c8..cf09948 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -34,8 +34,25 @@
 
 char kernel_nss_name[NSS_NAME_SIZE + 1];
 
+static unsigned long machine_flags;
+
 static void __init setup_boot_command_line(void);
 
+/*
+ * Get the TOD clock running.
+ */
+static void __init reset_tod_clock(void)
+{
+	u64 time;
+
+	if (store_clock(&time) == 0)
+		return;
+	/* TOD clock not running. Set the clock to Unix Epoch. */
+	if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
+		disabled_wait(0);
+
+	sched_clock_base_cc = TOD_UNIX_EPOCH;
+}
 
 #ifdef CONFIG_SHARED_KERNEL
 int __init savesys_ipl_nss(char *cmd, const int cmdlen);
@@ -370,6 +387,7 @@
  */
 void __init startup_init(void)
 {
+	reset_tod_clock();
 	ipl_save_parameters();
 	rescue_initrd();
 	clear_bss_section();
@@ -391,5 +409,6 @@
 	setup_hpage();
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
+	S390_lowcore.machine_flags = machine_flags;
 	lockdep_on();
 }
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 1268aa2..f3e2759 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -837,16 +837,29 @@
 	__CPUINIT
 	.globl restart_int_handler
 restart_int_handler:
+	basr	%r1,0
+restart_base:
+	spt	restart_vtime-restart_base(%r1)
+	stck	__LC_LAST_UPDATE_CLOCK
+	mvc	__LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+	mvc	__LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
 	l	%r15,__LC_SAVE_AREA+60	# load ksp
 	lctl	%c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs
 	lam	%a0,%a15,__LC_AREGS_SAVE_AREA
 	lm	%r6,%r15,__SF_GPRS(%r15) # load registers from clone
+	l	%r1,__LC_THREAD_INFO
+	mvc	__LC_USER_TIMER(8),__TI_user_timer(%r1)
+	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
 	basr	%r14,0
 	l	%r14,restart_addr-.(%r14)
 	br	%r14			# branch to start_secondary
 restart_addr:
 	.long	start_secondary
+	.align	8
+restart_vtime:
+	.long	0x7fffffff,0xffffffff
 	.previous
 #else
 /*
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index c6fbde1..84a1058 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -831,14 +831,27 @@
 	__CPUINIT
 	.globl restart_int_handler
 restart_int_handler:
+	basr	%r1,0
+restart_base:
+	spt	restart_vtime-restart_base(%r1)
+	stck	__LC_LAST_UPDATE_CLOCK
+	mvc	__LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+	mvc	__LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
 	lg	%r15,__LC_SAVE_AREA+120 # load ksp
 	lghi	%r10,__LC_CREGS_SAVE_AREA
 	lctlg	%c0,%c15,0(%r10) # get new ctl regs
 	lghi	%r10,__LC_AREGS_SAVE_AREA
 	lam	%a0,%a15,0(%r10)
 	lmg	%r6,%r15,__SF_GPRS(%r15) # load registers from clone
+	lg	%r1,__LC_THREAD_INFO
+	mvc	__LC_USER_TIMER(8),__TI_user_timer(%r1)
+	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
 	stosm	__SF_EMPTY(%r15),0x04	# now we can turn dat on
 	jg	start_secondary
+	.align	8
+restart_vtime:
+	.long	0x7fffffff,0xffffffff
 	.previous
 #else
 /*
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 1046c2c..22596d7 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -23,6 +23,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <asm/setup.h>
 #include <asm/lowcore.h>
 #include <asm/asm-offsets.h>
@@ -35,7 +36,7 @@
 #define ARCH_OFFSET	0
 #endif
 
-.section ".text.head","ax"
+__HEAD
 #ifndef CONFIG_IPL
 	.org   0
 	.long  0x00080000,0x80000000+startup	# Just a restart PSW
@@ -471,7 +472,12 @@
 .LPG0:
 	xc	0x200(256),0x200	# partially clear lowcore
 	xc	0x300(256),0x300
-
+	l	%r1,5f-.LPG0(%r13)
+	stck	0(%r1)
+	spt	6f-.LPG0(%r13)
+	mvc	__LC_LAST_UPDATE_CLOCK(8),0(%r1)
+	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
+	mvc	__LC_EXIT_TIMER(8),5f-.LPG0(%r13)
 #ifndef CONFIG_MARCH_G5
 	# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
 	stidp	__LC_CPUID		# store cpuid
@@ -496,9 +502,13 @@
 	brct	%r0,0b
 #endif
 
-	l	%r13,0f-.LPG0(%r13)
+	l	%r13,4f-.LPG0(%r13)
 	b	0(%r13)
-0:	.long	startup_continue
+	.align	4
+4:	.long	startup_continue
+5:	.long	sched_clock_base_cc
+	.align	8
+6:	.long	0x7fffffff,0xffffffff
 
 #
 # params at 10400 (setup.h)
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 6f3711a..b8bf4b1 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -23,6 +23,7 @@
 #include <asm/ebcdic.h>
 #include <asm/reset.h>
 #include <asm/sclp.h>
+#include <asm/sigp.h>
 #include <asm/checksum.h>
 
 #define IPL_PARM_BLOCK_VERSION 0
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 4bfdc42..28cf196 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -10,6 +10,7 @@
 
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/hardirq.h>
 #include <linux/time.h>
 #include <linux/module.h>
 #include <asm/lowcore.h>
@@ -253,7 +254,7 @@
 	struct mci *mci;
 	int umode;
 
-	lockdep_off();
+	nmi_enter();
 	s390_idle_check();
 
 	mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
@@ -363,7 +364,7 @@
 		mcck->warning = 1;
 		set_thread_flag(TIF_MCCK_PENDING);
 	}
-	lockdep_on();
+	nmi_exit();
 }
 
 static int __init machine_check_init(void)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 06201b9..7402b6a 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -82,9 +82,6 @@
 unsigned int console_irq = -1;
 EXPORT_SYMBOL(console_irq);
 
-unsigned long machine_flags;
-EXPORT_SYMBOL(machine_flags);
-
 unsigned long elf_hwcap = 0;
 char elf_platform[ELF_PLATFORM_SIZE];
 
@@ -426,6 +423,7 @@
 		__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
 	lc->current_task = (unsigned long) init_thread_union.thread_info.task;
 	lc->thread_info = (unsigned long) &init_thread_union;
+	lc->machine_flags = S390_lowcore.machine_flags;
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE) {
 		lc->extended_save_area_addr = (__u32)
@@ -436,6 +434,14 @@
 #else
 	lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
 #endif
+	lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
+	lc->async_enter_timer = S390_lowcore.async_enter_timer;
+	lc->exit_timer = S390_lowcore.exit_timer;
+	lc->user_timer = S390_lowcore.user_timer;
+	lc->system_timer = S390_lowcore.system_timer;
+	lc->steal_timer = S390_lowcore.steal_timer;
+	lc->last_update_timer = S390_lowcore.last_update_timer;
+	lc->last_update_clock = S390_lowcore.last_update_clock;
 	set_prefix((u32)(unsigned long) lc);
 	lowcore_ptr[0] = lc;
 }
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 006ed50..a985a3b 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -571,6 +571,7 @@
 	cpu_lowcore->current_task = (unsigned long) idle;
 	cpu_lowcore->cpu_nr = cpu;
 	cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
+	cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
 	eieio();
 
 	while (signal_processor(cpu, sigp_restart) == sigp_busy)
@@ -590,7 +591,8 @@
 	int pcpus, cpu;
 
 	pcpus = simple_strtoul(s, NULL, 0);
-	for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
+	init_cpu_possible(cpumask_of(0));
+	for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
 		set_cpu_possible(cpu, true);
 	return 0;
 }
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index fe5b25a..2c7739f 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -336,3 +336,5 @@
 SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
 SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
 SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
+SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
+SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f72d410..ef596d0 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -52,9 +52,6 @@
 #define USECS_PER_JIFFY     ((unsigned long) 1000000/HZ)
 #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
 
-/* The value of the TOD clock for 1.1.1970. */
-#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
-
 /*
  * Create a small time difference between the timer interrupts
  * on the different cpus to avoid lock contention.
@@ -63,9 +60,10 @@
 
 #define TICK_SIZE tick
 
+u64 sched_clock_base_cc = -1;	/* Force to data section. */
+
 static ext_int_info_t ext_int_info_cc;
 static ext_int_info_t ext_int_etr_cc;
-static u64 sched_clock_base_cc;
 
 static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
@@ -195,25 +193,15 @@
 static void etr_reset(void);
 static void stp_reset(void);
 
-/*
- * Get the TOD clock running.
- */
-static u64 __init reset_tod_clock(void)
+unsigned long read_persistent_clock(void)
 {
-	u64 time;
+	struct timespec ts;
 
-	etr_reset();
-	stp_reset();
-	if (store_clock(&time) == 0)
-		return time;
-	/* TOD clock not running. Set the clock to Unix Epoch. */
-	if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
-		panic("TOD clock not operational.");
-
-	return TOD_UNIX_EPOCH;
+	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
+	return ts.tv_sec;
 }
 
-static cycle_t read_tod_clock(void)
+static cycle_t read_tod_clock(struct clocksource *cs)
 {
 	return get_clock();
 }
@@ -265,12 +253,13 @@
  */
 void __init time_init(void)
 {
-	sched_clock_base_cc = reset_tod_clock();
+	struct timespec ts;
+	unsigned long flags;
+	cycle_t now;
 
-	/* set xtime */
-	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
+	/* Reset time synchronization interfaces. */
+	etr_reset();
+	stp_reset();
 
 	/* request the clock comparator external interrupt */
 	if (register_early_external_interrupt(0x1004,
@@ -278,17 +267,38 @@
 					      &ext_int_info_cc) != 0)
                 panic("Couldn't request external interrupt 0x1004");
 
-	if (clocksource_register(&clocksource_tod) != 0)
-		panic("Could not register TOD clock source");
-
 	/* request the timing alert external interrupt */
 	if (register_early_external_interrupt(0x1406,
 					      timing_alert_interrupt,
 					      &ext_int_etr_cc) != 0)
 		panic("Couldn't request external interrupt 0x1406");
 
+	if (clocksource_register(&clocksource_tod) != 0)
+		panic("Could not register TOD clock source");
+
+	/*
+	 * The TOD clock is an accurate clock. The xtime should be
+	 * initialized in a way that the difference between TOD and
+	 * xtime is reasonably small. Too bad that timekeeping_init
+	 * sets xtime.tv_nsec to zero. In addition the clock source
+	 * change from the jiffies clock source to the TOD clock
+	 * source add another error of up to 1/HZ second. The same
+	 * function sets wall_to_monotonic to a value that is too
+	 * small for /proc/uptime to be accurate.
+	 * Reset xtime and wall_to_monotonic to sane values.
+	 */
+	write_seqlock_irqsave(&xtime_lock, flags);
+	now = get_clock();
+	tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
+	clocksource_tod.cycle_last = now;
+	clocksource_tod.raw_time = xtime;
+	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
+	set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
+	write_sequnlock_irqrestore(&xtime_lock, flags);
+
 	/* Enable TOD clock interrupts on the boot cpu. */
 	init_cpu_timer();
+
 	/* Enable cpu timer interrupts on the boot cpu. */
 	vtime_init();
 }
@@ -1423,6 +1433,7 @@
 static void stp_work_fn(struct work_struct *work);
 static DEFINE_MUTEX(stp_work_mutex);
 static DECLARE_WORK(stp_work, stp_work_fn);
+static struct timer_list stp_timer;
 
 static int __init early_parse_stp(char *p)
 {
@@ -1454,10 +1465,16 @@
 	}
 }
 
+static void stp_timeout(unsigned long dummy)
+{
+	queue_work(time_sync_wq, &stp_work);
+}
+
 static int __init stp_init(void)
 {
 	if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
 		return 0;
+	setup_timer(&stp_timer, stp_timeout, 0UL);
 	time_init_wq();
 	if (!stp_online)
 		return 0;
@@ -1565,6 +1582,7 @@
 
 	if (!stp_online) {
 		chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+		del_timer_sync(&stp_timer);
 		goto out_unlock;
 	}
 
@@ -1586,6 +1604,13 @@
 	stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
 	put_online_cpus();
 
+	if (!check_sync_clock())
+		/*
+		 * There is a usable clock but the synchonization failed.
+		 * Retry after a second.
+		 */
+		mod_timer(&stp_timer, jiffies + HZ);
+
 out_unlock:
 	mutex_unlock(&stp_work_mutex);
 }
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 7a2063e..89399b8 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -29,8 +29,8 @@
 	. = 0x00000000;
 	.text : {
 	_text = .;		/* Text and read-only data */
-		*(.text.head)
-	TEXT_TEXT
+		HEAD_TEXT
+		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index ecf0304..c87f59b 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -134,6 +134,8 @@
 	/* Account time spent with enabled wait psw loaded as idle time. */
 	idle_time = S390_lowcore.int_clock - idle->idle_enter;
 	account_idle_time(idle_time);
+	S390_lowcore.steal_timer +=
+		idle->idle_enter - S390_lowcore.last_update_clock;
 	S390_lowcore.last_update_clock = S390_lowcore.int_clock;
 
 	/* Account system time spent going idle. */
@@ -238,6 +240,22 @@
 	}
 }
 
+cputime64_t s390_get_idle_time(int cpu)
+{
+	struct s390_idle_data *idle;
+	unsigned long long now, idle_time, idle_enter;
+
+	idle = &per_cpu(s390_idle, cpu);
+	spin_lock(&idle->lock);
+	now = get_clock();
+	idle_time = 0;
+	idle_enter = idle->idle_enter;
+	if (idle_enter != 0ULL && idle_enter < now)
+		idle_time = now - idle_enter;
+	spin_unlock(&idle->lock);
+	return idle_time;
+}
+
 /*
  * Sorted add to a list. List is linear searched until first bigger
  * element is found.
@@ -425,17 +443,7 @@
 }
 EXPORT_SYMBOL(add_virt_timer_periodic);
 
-/*
- * If we change a pending timer the function must be called on the CPU
- * where the timer is running on, e.g. by smp_call_function_single()
- *
- * The original mod_timer adds the timer if it is not pending. For
- * compatibility we do the same. The timer will be added on the current
- * CPU as a oneshot timer.
- *
- * returns whether it has modified a pending timer (1) or not (0)
- */
-int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic)
 {
 	struct vtimer_queue *vq;
 	unsigned long flags;
@@ -444,39 +452,35 @@
 	BUG_ON(!timer->function);
 	BUG_ON(!expires || expires > VTIMER_MAX_SLICE);
 
-	/*
-	 * This is a common optimization triggered by the
-	 * networking code - if the timer is re-modified
-	 * to be the same thing then just return:
-	 */
 	if (timer->expires == expires && vtimer_pending(timer))
 		return 1;
 
 	cpu = get_cpu();
 	vq = &per_cpu(virt_cpu_timer, cpu);
 
-	/* check if we run on the right CPU */
-	BUG_ON(timer->cpu != cpu);
-
 	/* disable interrupts before test if timer is pending */
 	spin_lock_irqsave(&vq->lock, flags);
 
 	/* if timer isn't pending add it on the current CPU */
 	if (!vtimer_pending(timer)) {
 		spin_unlock_irqrestore(&vq->lock, flags);
-		/* we do not activate an interval timer with mod_virt_timer */
-		timer->interval = 0;
+
+		if (periodic)
+			timer->interval = expires;
+		else
+			timer->interval = 0;
 		timer->expires = expires;
 		timer->cpu = cpu;
 		internal_add_vtimer(timer);
 		return 0;
 	}
 
+	/* check if we run on the right CPU */
+	BUG_ON(timer->cpu != cpu);
+
 	list_del_init(&timer->entry);
 	timer->expires = expires;
-
-	/* also change the interval if we have an interval timer */
-	if (timer->interval)
+	if (periodic)
 		timer->interval = expires;
 
 	/* the timer can't expire anymore so we can release the lock */
@@ -484,9 +488,32 @@
 	internal_add_vtimer(timer);
 	return 1;
 }
+
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+{
+	return __mod_vtimer(timer, expires, 0);
+}
 EXPORT_SYMBOL(mod_virt_timer);
 
 /*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires)
+{
+	return __mod_vtimer(timer, expires, 1);
+}
+EXPORT_SYMBOL(mod_virt_timer_periodic);
+
+/*
  * delete a virtual timer
  *
  * returns whether the deleted timer was pending (1) or not (0)
@@ -516,16 +543,8 @@
  */
 void init_cpu_vtimer(void)
 {
-	struct thread_info *ti = current_thread_info();
 	struct vtimer_queue *vq;
 
-	S390_lowcore.user_timer = ti->user_timer;
-	S390_lowcore.system_timer = ti->system_timer;
-
-	/* kick the virtual timer */
-	asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
-	asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
-
 	/* initialize per cpu vtimer structure */
 	vq = &__get_cpu_var(virt_cpu_timer);
 	INIT_LIST_HEAD(&vq->list);
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 8a42bbe..e4fac2e 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr  2 19:15:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 19:17:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
 CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
@@ -79,6 +80,7 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -98,6 +100,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -106,6 +109,8 @@
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,7 +123,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +170,7 @@
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -175,8 +180,6 @@
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
 # CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -186,38 +189,31 @@
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
-# CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
+CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
 # CONFIG_X2TLB is not set
 CONFIG_VSYSCALL=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_MAX_ACTIVE_REGIONS=1
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -249,6 +245,7 @@
 #
 # CONFIG_SH_HIGHLANDER is not set
 CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
 
 #
 # Timer and clock configuration
@@ -672,6 +669,7 @@
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -1009,15 +1007,17 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1218,6 +1218,7 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
@@ -1240,6 +1241,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1289,6 +1295,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1377,6 +1384,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1413,6 +1423,7 @@
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1422,9 +1433,14 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1542,6 +1558,7 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index d3f6caa..68e20ff 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -9,7 +9,7 @@
 struct pt_regs {
 	unsigned long long pc;
 	unsigned long long sr;
-	unsigned long long syscall_nr;
+	long long syscall_nr;
 	unsigned long long regs[63];
 	unsigned long long tregs[8];
 	unsigned long long pad[2];
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 0e5d204..406747f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -256,7 +256,6 @@
 {
 	clk_always_enable("uram0"); /* URAM */
 	clk_always_enable("xymem0"); /* XYMEM */
-	clk_always_enable("rtc0"); /* RTC */
 	clk_always_enable("veu0"); /* VEU */
 	clk_always_enable("vpu0"); /* VPU */
 	clk_always_enable("jpu0"); /* JPU */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 5338dac..a800466 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -267,7 +267,6 @@
 static int __init sh7723_devices_setup(void)
 {
 	clk_always_enable("meram0"); /* MERAM */
-	clk_always_enable("rtc0"); /* RTC */
 	clk_always_enable("veu1"); /* VEU2H1 */
 	clk_always_enable("veu0"); /* VEU2H0 */
 	clk_always_enable("vpu0"); /* VPU */
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 788605f..a78be74 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -10,6 +10,7 @@
  *
  * Head.S contains the SH exception handlers and startup code.
  */
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 
@@ -40,7 +41,7 @@
 1:
 	.skip	PAGE_SIZE - empty_zero_page - 1b
 
-	.section	.text.head, "ax"
+	__HEAD
 
 /*
  * Condition at the entry of _stext:
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index 7ccfb99..3ea7658 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -8,6 +8,9 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+
+#include <linux/init.h>
+
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
@@ -110,7 +113,7 @@
 fpu_in_use:	.quad	0
 
 
-	.section	.text.head, "ax"
+	__HEAD
 	.balign L1_CACHE_BYTES
 /*
  * Condition at the entry of __stext:
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 58dfc02..e3a7e36 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -63,6 +63,15 @@
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)
 {
+	/*
+	 * The shift for mmap2 is constant, regardless of PAGE_SIZE
+	 * setting.
+	 */
+	if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+		return -EINVAL;
+
+	pgoff >>= PAGE_SHIFT - 12;
+
 	return do_mmap2(addr, len, prot, flags, fd, pgoff);
 }
 
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index c34e1e0..1700d24 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -208,7 +208,7 @@
 	if (!clocksource_sh.rating)
 		return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
 
-	cycles = clocksource_sh.read();
+	cycles = clocksource_sh.read(&clocksource_sh);
 	return cyc2ns(&clocksource_sh, cycles);
 }
 #endif
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index c5d3396..fe8d893 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -81,7 +81,7 @@
  */
 static int tmus_are_scaled;
 
-static cycle_t tmu_timer_read(void)
+static cycle_t tmu_timer_read(struct clocksource *cs)
 {
 	return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
 }
diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S
index d0b2a71..dd9b2ee 100644
--- a/arch/sh/kernel/vmlinux_32.lds.S
+++ b/arch/sh/kernel/vmlinux_32.lds.S
@@ -31,7 +31,7 @@
 	} = 0
 
 	.text : {
-		*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S
index 33fa464..6966446 100644
--- a/arch/sh/kernel/vmlinux_64.lds.S
+++ b/arch/sh/kernel/vmlinux_64.lds.S
@@ -42,7 +42,7 @@
 	} = 0
 
 	.text : C_PHYS(.text) {
-		*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		*(.text64)
 		*(.text..SHmedia32)
diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 09ab46e..8bcd27a 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Thu Jan  8 16:45:44 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 04:04:46 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -30,17 +30,27 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -49,24 +59,28 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -75,12 +89,15 @@
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -93,7 +110,6 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -109,11 +125,6 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -144,6 +155,8 @@
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_SUN_PM=y
 # CONFIG_SPARC_LED is not set
 CONFIG_SERIAL_CONSOLE=y
@@ -159,6 +172,7 @@
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 CONFIG_SUN_OPENPROMFS=m
 CONFIG_SPARC32_PCI=y
@@ -175,8 +189,6 @@
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -251,6 +263,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -263,7 +276,6 @@
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -313,12 +325,16 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -375,8 +391,10 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -398,6 +416,7 @@
 CONFIG_SCSI_SUNESP=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -413,6 +432,7 @@
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -430,6 +450,8 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -448,6 +470,7 @@
 # CONFIG_E1000 is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_MYRI_SBUS is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -462,6 +485,7 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -471,6 +495,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -480,6 +505,7 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -487,7 +513,6 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -537,7 +562,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -597,6 +621,7 @@
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -688,7 +713,6 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -700,7 +724,7 @@
 #
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
@@ -750,6 +774,7 @@
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -777,6 +802,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -786,6 +812,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -820,14 +851,20 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -838,7 +875,6 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -911,6 +947,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -939,15 +978,7 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_KGDB=y
@@ -979,10 +1010,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -1052,6 +1085,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1059,6 +1093,7 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1074,7 +1109,10 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index ade4994..b5d63bd 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan  2 18:14:26 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 02:03:07 2009
 #
+CONFIG_64BIT=y
 CONFIG_SPARC=y
+# CONFIG_SPARC32 is not set
 CONFIG_SPARC64=y
 CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
 CONFIG_BITS=64
-CONFIG_64BIT=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -22,6 +23,7 @@
 CONFIG_MMU=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +38,27 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -55,24 +67,28 @@
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -82,6 +98,7 @@
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -91,15 +108,16 @@
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -107,10 +125,8 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -127,11 +143,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,11 +196,12 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=1
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
@@ -210,6 +222,8 @@
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 CONFIG_SUN_OPENPROMFS=m
 CONFIG_SPARC64_PCI=y
@@ -229,8 +243,6 @@
 #
 # Networking options
 #
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -292,25 +304,7 @@
 # CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID2=m
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+# CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
@@ -326,6 +320,7 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -334,18 +329,19 @@
 #
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -389,19 +385,27 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_XFER_MODE=y
 CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
@@ -439,6 +443,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -506,8 +511,10 @@
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -528,6 +535,7 @@
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -536,7 +544,7 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=m
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -561,6 +569,7 @@
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -589,14 +598,16 @@
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNLANCE=m
+CONFIG_HAPPYMEAL=m
 # CONFIG_SUNBMAC is not set
 # CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_CASSINI=m
+CONFIG_SUNGEM=m
+# CONFIG_CASSINI is not set
 CONFIG_SUNVNET=m
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -631,9 +642,10 @@
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_MYRI_SBUS is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -648,6 +660,7 @@
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -657,6 +670,7 @@
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 CONFIG_NIU=m
@@ -666,6 +680,7 @@
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -673,7 +688,10 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -738,7 +756,6 @@
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -805,6 +822,7 @@
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_HW_RANDOM_N2RNG=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -867,12 +885,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -897,12 +912,14 @@
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -917,10 +934,14 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -957,10 +978,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -1053,6 +1076,7 @@
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1141,6 +1165,8 @@
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1197,28 +1223,31 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1247,6 +1276,7 @@
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1268,18 +1298,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1315,7 +1344,6 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1327,6 +1355,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1390,6 +1423,7 @@
 CONFIG_RTC_DRV_SUN4V=y
 CONFIG_RTC_DRV_STARFIRE=y
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -1412,6 +1446,7 @@
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -1426,6 +1461,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1435,6 +1471,11 @@
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1460,10 +1501,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1473,6 +1511,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1481,6 +1520,7 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1555,6 +1595,9 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1590,10 +1633,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1602,18 +1647,21 @@
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
 # CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 
 #
 # Security options
@@ -1642,10 +1690,12 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 CONFIG_CRYPTO_TEST=m
@@ -1715,6 +1765,7 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1723,11 +1774,13 @@
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
@@ -1737,8 +1790,11 @@
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index ce46597..bb91b12 100644
--- a/arch/sparc/include/asm/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -15,6 +15,8 @@
 
 #ifdef __KERNEL__
 
+#include <asm/system.h>
+
 #define ATOMIC_INIT(i)  { (i) }
 
 extern int __atomic_add_return(int, atomic_t *);
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index f0b4b51..e91f01a 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -72,7 +72,7 @@
 	.align 4
 
 	/* The Sparc trap table, bootloader gives us control at _start. */
-	.section .text.head,"ax"
+	__HEAD
 	.globl	start, _stext, _start, __stext
 	.globl  trapbase
 _start:   /* danger danger */
diff --git a/arch/sparc/kernel/ldc.c b/arch/sparc/kernel/ldc.c
index 6ce5d25..adf5f27 100644
--- a/arch/sparc/kernel/ldc.c
+++ b/arch/sparc/kernel/ldc.c
@@ -1183,8 +1183,7 @@
 	free_queue(lp->tx_num_entries, lp->tx_base);
 
 out_free_mssbuf:
-	if (mssbuf)
-		kfree(mssbuf);
+	kfree(mssbuf);
 
 out_free_iommu:
 	ldc_iommu_release(lp);
@@ -1217,8 +1216,7 @@
 
 	hlist_del(&lp->list);
 
-	if (lp->mssbuf)
-		kfree(lp->mssbuf);
+	kfree(lp->mssbuf);
 
 	ldc_iommu_release(lp);
 
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 0a83bd7..c8f14c1 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -246,8 +246,25 @@
 
 static int of_bus_sbus_match(struct device_node *np)
 {
-	return !strcmp(np->name, "sbus") ||
-		!strcmp(np->name, "sbi");
+	struct device_node *dp = np;
+
+	while (dp) {
+		if (!strcmp(dp->name, "sbus") ||
+		    !strcmp(dp->name, "sbi"))
+			return 1;
+
+		/* Have a look at use_1to1_mapping().  We're trying
+		 * to match SBUS if that's the top-level bus and we
+		 * don't have some intervening real bus that provides
+		 * ranges based translations.
+		 */
+		if (of_find_property(dp, "ranges", NULL) != NULL)
+			break;
+
+		dp = dp->parent;
+	}
+
+	return 0;
 }
 
 static void of_bus_sbus_count_cells(struct device_node *child,
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 27381f1..5ac287a 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -300,8 +300,25 @@
 
 static int of_bus_sbus_match(struct device_node *np)
 {
-	return !strcmp(np->name, "sbus") ||
-		!strcmp(np->name, "sbi");
+	struct device_node *dp = np;
+
+	while (dp) {
+		if (!strcmp(dp->name, "sbus") ||
+		    !strcmp(dp->name, "sbi"))
+			return 1;
+
+		/* Have a look at use_1to1_mapping().  We're trying
+		 * to match SBUS if that's the top-level bus and we
+		 * don't have some intervening real bus that provides
+		 * ranges based translations.
+		 */
+		if (of_find_property(dp, "ranges", NULL) != NULL)
+			break;
+
+		dp = dp->parent;
+	}
+
+	return 0;
 }
 
 static void of_bus_sbus_count_cells(struct device_node *child,
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 708e12a..f7642e5 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -118,9 +118,9 @@
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
-	ipi_call_lock();
+	ipi_call_lock_irq();
 	cpu_set(cpuid, cpu_online_map);
-	ipi_call_unlock();
+	ipi_call_unlock_irq();
 
 	/* idle thread is expected to have preempt disabled */
 	preempt_disable();
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index e800503..f5000a4 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -206,21 +206,12 @@
 		struct compat_stat64 __user * statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_compat_stat64(&stat, statbuf);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_compat_stat64(&stat, statbuf);
 }
 
 asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index db310aa..5c12e79 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -814,6 +814,11 @@
 }
 EXPORT_SYMBOL(udelay);
 
+static cycle_t clocksource_tick_read(struct clocksource *cs)
+{
+	return tick_ops->get_tick();
+}
+
 void __init time_init(void)
 {
 	unsigned long freq = sparc64_init_timers();
@@ -827,7 +832,7 @@
 	clocksource_tick.mult =
 		clocksource_hz2mult(freq,
 				    clocksource_tick.shift);
-	clocksource_tick.read = tick_ops->get_tick;
+	clocksource_tick.read = clocksource_tick_read;
 
 	printk("clocksource: mult[%x] shift[%d]\n",
 	       clocksource_tick.mult, clocksource_tick.shift);
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index 7626708..fcbbd00 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -41,7 +41,7 @@
 	.text TEXTSTART :
 	{
 		_text = .;
-		*(.text.head)
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
index 7b5cea7..0ccad0f 100644
--- a/arch/um/Kconfig.rest
+++ b/arch/um/Kconfig.rest
@@ -36,7 +36,7 @@
 
 #This is just to shut up some Kconfig warnings, so no prompt.
 config INPUT
-	bool
+	tristate
 	default n
 
 source "arch/um/Kconfig.debug"
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index b13a87a..c8b9c46 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -65,7 +65,7 @@
 	return IRQ_HANDLED;
 }
 
-static cycle_t itimer_read(void)
+static cycle_t itimer_read(struct clocksource *cs)
 {
 	return os_nsecs() / 1000;
 }
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index bc25b9f..df9e885 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -277,6 +277,7 @@
 config NUMA_MIGRATE_IRQ_DESC
 	bool "Move irq desc when changing irq smp_affinity"
 	depends on SPARSE_IRQ && NUMA
+	depends on BROKEN
 	default n
 	---help---
 	  This enables moving irq_desc to cpu/node that irq will use handled.
@@ -353,6 +354,7 @@
 	bool "SGI Ultraviolet"
 	depends on X86_64
 	depends on X86_EXTENDED_PLATFORM
+	depends on NUMA
 	select X86_X2APIC
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
@@ -663,6 +665,7 @@
 
 config NR_CPUS
 	int "Maximum number of CPUs" if SMP && !MAXSMP
+	range 2 8 if SMP && X86_32 && !X86_BIGSMP
 	range 2 512 if SMP && !MAXSMP
 	default "1" if !SMP
 	default "4096" if MAXSMP
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 924e156..8130334 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -506,6 +506,7 @@
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
+	depends on BROKEN
 	---help---
 	  This adds a ptrace interface to the hardware's branch trace store.
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f05d8c9..8c86b72 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -153,7 +153,7 @@
 
 boot := arch/x86/boot
 
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install
+BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
 
 PHONY += bzImage $(BOOT_TARGETS)
 
@@ -171,6 +171,10 @@
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
+PHONY += install
+install:
+	$(Q)$(MAKE) $(build)=$(boot) $@
+
 PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/x86/vdso $@
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index efac92f..085a8c3 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -129,21 +129,12 @@
 			      struct stat64 __user *statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_stat64(statbuf, &stat);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_stat64(statbuf, &stat);
 }
 
 /*
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 5623c50..c45f415 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -37,7 +37,7 @@
 struct gdt_page {
 	struct desc_struct gdt[GDT_ENTRIES];
 } __attribute__((aligned(PAGE_SIZE)));
-DECLARE_PER_CPU(struct gdt_page, gdt_page);
+DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page);
 
 static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
 {
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 039db6a..37555e5 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -26,7 +26,7 @@
 #endif
 } ____cacheline_aligned irq_cpustat_t;
 
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
 /* We can have at most NR_VECTORS irqs routed to a cpu at a time */
 #define MAX_HARDIRQS_PER_CPU NR_VECTORS
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index 0f4ee71..faae199 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -5,7 +5,6 @@
 #define LHCALL_FLUSH_ASYNC	0
 #define LHCALL_LGUEST_INIT	1
 #define LHCALL_SHUTDOWN		2
-#define LHCALL_LOAD_GDT		3
 #define LHCALL_NEW_PGTABLE	4
 #define LHCALL_FLUSH_TLB	5
 #define LHCALL_LOAD_IDT_ENTRY	6
@@ -17,6 +16,7 @@
 #define LHCALL_SET_PMD		15
 #define LHCALL_LOAD_TLS		16
 #define LHCALL_NOTIFY		17
+#define LHCALL_LOAD_GDT_ENTRY	18
 
 #define LGUEST_TRAP_ENTRY 0x1F
 
diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 2cd07b9..7af14e5 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -18,9 +18,5 @@
 
 extern int kernel_map_sync_memtype(u64 base, unsigned long size,
 		unsigned long flag);
-extern void map_devmem(unsigned long pfn, unsigned long size,
-		       struct pgprot vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
-			 struct pgprot vma_prot);
 
 #endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index fcf4d92..c2cceae 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -138,7 +138,7 @@
 extern __u32			cleared_cpu_caps[NCAPINTS];
 
 #ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
 #define cpu_data(cpu)		per_cpu(cpu_info, cpu)
 #define current_cpu_data	__get_cpu_var(cpu_info)
 #else
@@ -270,7 +270,7 @@
 
 } ____cacheline_aligned;
 
-DECLARE_PER_CPU(struct tss_struct, init_tss);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss);
 
 /*
  * Save the original ist values for checking stack pointers during debugging
@@ -393,7 +393,7 @@
 	};
 };
 
-DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
+DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union);
 DECLARE_INIT_PER_CPU(irq_stack_union);
 
 DECLARE_PER_CPU(char *, irq_stack_ptr);
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index d3539f9..16a5c84 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -152,7 +152,7 @@
 	struct mm_struct *active_mm;
 	int state;
 };
-DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
 
 static inline void reset_lazy_tlbstate(void)
 {
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index db68ac8..2cae46c 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -17,6 +17,11 @@
 /* ========================================================================= */
 /*                           UVH_BAU_DATA_CONFIG                             */
 /* ========================================================================= */
+#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
+/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */
 #define UVH_BAU_DATA_CONFIG 0x61680UL
 #define UVH_BAU_DATA_CONFIG_32 0x0438
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index a2789e4..30da617 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3670,12 +3670,14 @@
 {
 	int ret;
 	struct msi_msg msg;
+	struct irq_desc *desc = irq_to_desc(irq);
 
 	ret = msi_compose_msg(NULL, irq, &msg);
 	if (ret < 0)
 		return ret;
 
 	hpet_msi_write(irq, &msg);
+	desc->status |= IRQ_MOVE_PCNTXT;
 	set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
 		"edge");
 
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index d6bd624..ce4fbfa 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -138,7 +138,7 @@
 	if (!prev_nmi_count)
 		goto error;
 
-	alloc_cpumask_var(&backtrace_mask, GFP_KERNEL);
+	alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
 #ifdef CONFIG_SMP
@@ -414,7 +414,8 @@
 		touched = 1;
 	}
 
-	if (cpumask_test_cpu(cpu, backtrace_mask)) {
+	/* We can be called before check_nmi_watchdog, hence NULL check. */
+	if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 1248318..2bda693 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -19,6 +19,7 @@
 #include <linux/timer.h>
 #include <linux/cpu.h>
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
@@ -34,6 +35,17 @@
 
 static enum uv_system_type uv_system_type;
 
+static int early_get_nodeid(void)
+{
+	union uvh_node_id_u node_id;
+	unsigned long *mmr;
+
+	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
+	node_id.v = *mmr;
+	early_iounmap(mmr, sizeof(*mmr));
+	return node_id.s.node_id;
+}
+
 static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
@@ -42,6 +54,8 @@
 		else if (!strcmp(oem_table_id, "UVX"))
 			uv_system_type = UV_X2APIC;
 		else if (!strcmp(oem_table_id, "UVH")) {
+			__get_cpu_var(x2apic_extra_bits) =
+				early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
 			return 1;
 		}
@@ -549,7 +563,8 @@
 	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
 	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
 	int max_pnode = 0;
-	unsigned long mmr_base, present;
+	unsigned long mmr_base, present, paddr;
+	unsigned short pnode_mask;
 
 	map_low_mmrs();
 
@@ -592,6 +607,7 @@
 		}
 	}
 
+	pnode_mask = (1 << n_val) - 1;
 	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
@@ -615,7 +631,7 @@
 		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
 		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
 		uv_cpu_hub_info(cpu)->pnode = pnode;
-		uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
@@ -631,6 +647,17 @@
 			lcpu, blade);
 	}
 
+	/* Add blade/pnode info for nodes without cpus */
+	for_each_online_node(nid) {
+		if (uv_node_to_blade[nid] >= 0)
+			continue;
+		paddr = node_start_pfn(nid) << PAGE_SHIFT;
+		paddr = uv_soc_phys_ram_to_gpa(paddr);
+		pnode = (paddr >> m_val) & pnode_mask;
+		blade = boot_pnode_to_blade(pnode);
+		uv_node_to_blade[nid] = blade;
+	}
+
 	map_gru_high(max_pnode);
 	map_mmr_high(max_pnode);
 	map_config_high(max_pnode);
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
index f638827..63a88e1 100644
--- a/arch/x86/kernel/bios_uv.c
+++ b/arch/x86/kernel/bios_uv.c
@@ -182,7 +182,8 @@
 	memcpy(&uv_systab, tab, sizeof(struct uv_systab));
 	iounmap(tab);
 
-	printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision);
+	printk(KERN_INFO "EFI UV System Table Revision %d\n",
+					uv_systab.revision);
 }
 #else	/* !CONFIG_EFI */
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 837c2c4..208ecf6 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -65,14 +65,18 @@
 struct acpi_cpufreq_data {
 	struct acpi_processor_performance *acpi_data;
 	struct cpufreq_frequency_table *freq_table;
-	unsigned int max_freq;
 	unsigned int resume;
 	unsigned int cpu_feature;
-	u64 saved_aperf, saved_mperf;
 };
 
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
 
+struct acpi_msr_data {
+	u64 saved_aperf, saved_mperf;
+};
+
+static DEFINE_PER_CPU(struct acpi_msr_data, msr_data);
+
 DEFINE_TRACE(power_mark);
 
 /* acpi_perf_data is a pointer to percpu data. */
@@ -204,7 +208,13 @@
 
 static void drv_write(struct drv_cmd *cmd)
 {
+	int this_cpu;
+
+	this_cpu = get_cpu();
+	if (cpumask_test_cpu(this_cpu, cmd->mask))
+		do_drv_write(cmd);
 	smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
+	put_cpu();
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -281,11 +291,11 @@
 		return 0;
 
 	cur.aperf.whole = readin.aperf.whole -
-				per_cpu(drv_data, cpu)->saved_aperf;
+				per_cpu(msr_data, cpu).saved_aperf;
 	cur.mperf.whole = readin.mperf.whole -
-				per_cpu(drv_data, cpu)->saved_mperf;
-	per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole;
-	per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole;
+				per_cpu(msr_data, cpu).saved_mperf;
+	per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole;
+	per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole;
 
 #ifdef __i386__
 	/*
@@ -329,7 +339,7 @@
 
 #endif
 
-	retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100;
+	retval = (policy->cpuinfo.max_freq * perf_percent) / 100;
 
 	return retval;
 }
@@ -682,16 +692,11 @@
 	/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
 	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
 	    policy->cpuinfo.transition_latency > 20 * 1000) {
-		static int print_once;
 		policy->cpuinfo.transition_latency = 20 * 1000;
-		if (!print_once) {
-			print_once = 1;
-			printk(KERN_INFO "Capping off P-state tranision latency"
-				" at 20 uS\n");
-		}
+			printk_once(KERN_INFO "Capping off P-state tranision"
+				    " latency at 20 uS\n");
 	}
 
-	data->max_freq = perf->states[0].core_frequency * 1000;
 	/* table init */
 	for (i = 0; i < perf->state_count; i++) {
 		if (i > 0 && perf->states[i].core_frequency >=
@@ -710,6 +715,9 @@
 	if (result)
 		goto err_freqfree;
 
+	if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
+		printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+
 	switch (perf->control_register.space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
 		/* Current speed is unknown and not detectable by IO port */
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index a331ec3..38946c6 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1410,7 +1410,10 @@
 paranoid_swapgs:
 	TRACE_IRQS_IRETQ 0
 	SWAPGS_UNSAFE_STACK
+	RESTORE_ALL 8
+	jmp irq_return
 paranoid_restore:
+	TRACE_IRQS_IRETQ 0
 	RESTORE_ALL 8
 	jmp irq_return
 paranoid_userspace:
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 648b3a2..81408b9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -236,6 +236,10 @@
 	unsigned long cfg = hpet_readl(HPET_CFG);
 	cfg &= ~HPET_CFG_ENABLE;
 	hpet_writel(cfg, HPET_CFG);
+}
+
+static void hpet_reset_counter(void)
+{
 	hpet_writel(0, HPET_COUNTER);
 	hpet_writel(0, HPET_COUNTER + 4);
 }
@@ -250,6 +254,7 @@
 static void hpet_restart_counter(void)
 {
 	hpet_stop_counter();
+	hpet_reset_counter();
 	hpet_start_counter();
 }
 
@@ -309,7 +314,7 @@
 static void hpet_set_mode(enum clock_event_mode mode,
 			  struct clock_event_device *evt, int timer)
 {
-	unsigned long cfg;
+	unsigned long cfg, cmp, now;
 	uint64_t delta;
 
 	switch (mode) {
@@ -317,12 +322,23 @@
 		hpet_stop_counter();
 		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
 		delta >>= evt->shift;
+		now = hpet_readl(HPET_COUNTER);
+		cmp = now + (unsigned long) delta;
 		cfg = hpet_readl(HPET_Tn_CFG(timer));
 		/* Make sure we use edge triggered interrupts */
 		cfg &= ~HPET_TN_LEVEL;
 		cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 		       HPET_TN_SETVAL | HPET_TN_32BIT;
 		hpet_writel(cfg, HPET_Tn_CFG(timer));
+		hpet_writel(cmp, HPET_Tn_CMP(timer));
+		udelay(1);
+		/*
+		 * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
+		 * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
+		 * bit is automatically cleared after the first write.
+		 * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
+		 * Publication # 24674)
+		 */
 		hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
 		hpet_start_counter();
 		hpet_print_config();
@@ -722,7 +738,7 @@
 /*
  * Clock source related code
  */
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
 {
 	return (cycle_t)hpet_readl(HPET_COUNTER);
 }
@@ -756,7 +772,7 @@
 	hpet_restart_counter();
 
 	/* Verify whether hpet counter works */
-	t1 = read_hpet();
+	t1 = hpet_readl(HPET_COUNTER);
 	rdtscll(start);
 
 	/*
@@ -770,7 +786,7 @@
 		rdtscll(now);
 	} while ((now - start) < 200000UL);
 
-	if (t1 == read_hpet()) {
+	if (t1 == hpet_readl(HPET_COUNTER)) {
 		printk(KERN_WARNING
 		       "HPET counter not counting. HPET disabled\n");
 		return -ENODEV;
diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 3475440..c2e0bb0 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -129,7 +129,7 @@
  * to just read by itself. So use jiffies to emulate a free
  * running counter:
  */
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
 {
 	static int old_count;
 	static u32 old_jifs;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 137f2e8..223af43 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -77,6 +77,11 @@
 	return ret;
 }
 
+static cycle_t kvm_clock_get_cycles(struct clocksource *cs)
+{
+	return kvm_clock_read();
+}
+
 /*
  * If we don't do that, there is the possibility that the guest
  * will calibrate under heavy load - thus, getting a lower lpj -
@@ -107,7 +112,7 @@
 
 static struct clocksource kvm_clock = {
 	.name = "kvm-clock",
-	.read = kvm_clock_read,
+	.read = kvm_clock_get_cycles,
 	.rating = 400,
 	.mask = CLOCKSOURCE_MASK(64),
 	.mult = 1 << KVM_SCALE,
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 2e0eb41..98c470c 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -380,8 +380,6 @@
 		return err;
 
 	err = microcode_init_cpu(cpu);
-	if (err)
-		sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 
 	return err;
 }
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 34f12e9..221a385 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -50,7 +50,7 @@
 	return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags);
 }
 
-struct dma_map_ops swiotlb_dma_ops = {
+static struct dma_map_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = x86_swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index e95022e..7563b31 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -261,8 +261,6 @@
 {
 	if (hpet_force_user)
 		old_ich_force_enable_hpet(dev);
-	else
-		hpet_print_force_info();
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index deb5ebb..ed0c337 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -25,6 +25,8 @@
 
 /* position of pnode (which is nasid>>1): */
 static int			uv_nshift __read_mostly;
+/* base pnode in this partition */
+static int			uv_partition_base_pnode __read_mostly;
 
 static unsigned long		uv_mmask __read_mostly;
 
@@ -32,6 +34,34 @@
 static DEFINE_PER_CPU(struct bau_control, bau_control);
 
 /*
+ * Determine the first node on a blade.
+ */
+static int __init blade_to_first_node(int blade)
+{
+	int node, b;
+
+	for_each_online_node(node) {
+		b = uv_node_to_blade_id(node);
+		if (blade == b)
+			return node;
+	}
+	return -1; /* shouldn't happen */
+}
+
+/*
+ * Determine the apicid of the first cpu on a blade.
+ */
+static int __init blade_to_first_apicid(int blade)
+{
+	int cpu;
+
+	for_each_present_cpu(cpu)
+		if (blade == uv_cpu_to_blade_id(cpu))
+			return per_cpu(x86_cpu_to_apicid, cpu);
+	return -1;
+}
+
+/*
  * Free a software acknowledge hardware resource by clearing its Pending
  * bit. This will return a reply to the sender.
  * If the message has timed out, a reply has already been sent by the
@@ -67,7 +97,7 @@
 	msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
 	cpu = uv_blade_processor_id();
 	msg->number_of_cpus =
-	    uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+		uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
 	this_cpu_mask = 1UL << cpu;
 	if (msp->seen_by.bits & this_cpu_mask)
 		return;
@@ -215,14 +245,14 @@
  * Returns @flush_mask if some remote flushing remains to be done. The
  * mask will have some bits still set.
  */
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
 					     struct bau_desc *bau_desc,
 					     struct cpumask *flush_mask)
 {
 	int completion_status = 0;
 	int right_shift;
 	int tries = 0;
-	int blade;
+	int pnode;
 	int bit;
 	unsigned long mmr_offset;
 	unsigned long index;
@@ -265,8 +295,8 @@
 	 * use the IPI method of shootdown on them.
 	 */
 	for_each_cpu(bit, flush_mask) {
-		blade = uv_cpu_to_blade_id(bit);
-		if (blade == this_blade)
+		pnode = uv_cpu_to_pnode(bit);
+		if (pnode == this_pnode)
 			continue;
 		cpumask_clear_cpu(bit, flush_mask);
 	}
@@ -309,16 +339,16 @@
 	struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask);
 	int i;
 	int bit;
-	int blade;
+	int pnode;
 	int uv_cpu;
-	int this_blade;
+	int this_pnode;
 	int locals = 0;
 	struct bau_desc *bau_desc;
 
 	cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
 
 	uv_cpu = uv_blade_processor_id();
-	this_blade = uv_numa_blade_id();
+	this_pnode = uv_hub_info->pnode;
 	bau_desc = __get_cpu_var(bau_control).descriptor_base;
 	bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
 
@@ -326,13 +356,14 @@
 
 	i = 0;
 	for_each_cpu(bit, flush_mask) {
-		blade = uv_cpu_to_blade_id(bit);
-		BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
-		if (blade == this_blade) {
+		pnode = uv_cpu_to_pnode(bit);
+		BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
+		if (pnode == this_pnode) {
 			locals++;
 			continue;
 		}
-		bau_node_set(blade, &bau_desc->distribution);
+		bau_node_set(pnode - uv_partition_base_pnode,
+				&bau_desc->distribution);
 		i++;
 	}
 	if (i == 0) {
@@ -350,7 +381,7 @@
 	bau_desc->payload.address = va;
 	bau_desc->payload.sending_cpu = cpu;
 
-	return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
+	return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
 }
 
 /*
@@ -418,24 +449,58 @@
 	set_irq_regs(old_regs);
 }
 
+/*
+ * uv_enable_timeouts
+ *
+ * Each target blade (i.e. blades that have cpu's) needs to have
+ * shootdown message timeouts enabled.  The timeout does not cause
+ * an interrupt, but causes an error message to be returned to
+ * the sender.
+ */
 static void uv_enable_timeouts(void)
 {
-	int i;
 	int blade;
-	int last_blade;
+	int nblades;
 	int pnode;
-	int cur_cpu = 0;
-	unsigned long apicid;
+	unsigned long mmr_image;
 
-	last_blade = -1;
-	for_each_online_node(i) {
-		blade = uv_node_to_blade_id(i);
-		if (blade == last_blade)
+	nblades = uv_num_possible_blades();
+
+	for (blade = 0; blade < nblades; blade++) {
+		if (!uv_blade_nr_possible_cpus(blade))
 			continue;
-		last_blade = blade;
-		apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+
 		pnode = uv_blade_to_pnode(blade);
-		cur_cpu += uv_blade_nr_possible_cpus(i);
+		mmr_image =
+		    uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL);
+		/*
+		 * Set the timeout period and then lock it in, in three
+		 * steps; captures and locks in the period.
+		 *
+		 * To program the period, the SOFT_ACK_MODE must be off.
+		 */
+		mmr_image &= ~((unsigned long)1 <<
+			       UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+		uv_write_global_mmr64
+		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+		/*
+		 * Set the 4-bit period.
+		 */
+		mmr_image &= ~((unsigned long)0xf <<
+			UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+		mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD <<
+			     UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+		uv_write_global_mmr64
+		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+		/*
+		 * Subsequent reversals of the timebase bit (3) cause an
+		 * immediate timeout of one or all INTD resources as
+		 * indicated in bits 2:0 (7 causes all of them to timeout).
+		 */
+		mmr_image |= ((unsigned long)1 <<
+			      UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+		uv_write_global_mmr64
+		    (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
 	}
 }
 
@@ -482,8 +547,7 @@
 			   stat->requestee, stat->onetlb, stat->alltlb,
 			   stat->s_retry, stat->d_retry, stat->ptc_i);
 		seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
-			   uv_read_global_mmr64(uv_blade_to_pnode
-					(uv_cpu_to_blade_id(cpu)),
+			   uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
 					UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
 			   stat->sflush, stat->dflush,
 			   stat->retriesok, stat->nomsg,
@@ -617,16 +681,18 @@
  * finish the initialization of the per-blade control structures
  */
 static void __init
-uv_table_bases_finish(int blade, int node, int cur_cpu,
+uv_table_bases_finish(int blade,
 		      struct bau_control *bau_tablesp,
 		      struct bau_desc *adp)
 {
 	struct bau_control *bcp;
-	int i;
+	int cpu;
 
-	for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
-		bcp = (struct bau_control *)&per_cpu(bau_control, i);
+	for_each_present_cpu(cpu) {
+		if (blade != uv_cpu_to_blade_id(cpu))
+			continue;
 
+		bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
 		bcp->bau_msg_head	= bau_tablesp->va_queue_first;
 		bcp->va_queue_first	= bau_tablesp->va_queue_first;
 		bcp->va_queue_last	= bau_tablesp->va_queue_last;
@@ -649,11 +715,10 @@
 	struct bau_desc *adp;
 	struct bau_desc *ad2;
 
-	adp = (struct bau_desc *)
-	    kmalloc_node(16384, GFP_KERNEL, node);
+	adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
 	BUG_ON(!adp);
 
-	pa = __pa((unsigned long)adp);
+	pa = uv_gpa(adp); /* need the real nasid*/
 	n = pa >> uv_nshift;
 	m = pa & uv_mmask;
 
@@ -667,8 +732,12 @@
 	for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
 		memset(ad2, 0, sizeof(struct bau_desc));
 		ad2->header.sw_ack_flag = 1;
-		ad2->header.base_dest_nodeid =
-		    uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+		/*
+		 * base_dest_nodeid is the first node in the partition, so
+		 * the bit map will indicate partition-relative node numbers.
+		 * note that base_dest_nodeid is actually a nasid.
+		 */
+		ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
 		ad2->header.command = UV_NET_ENDPOINT_INTD;
 		ad2->header.int_both = 1;
 		/*
@@ -686,6 +755,8 @@
 uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
 {
 	struct bau_payload_queue_entry *pqp;
+	unsigned long pa;
+	int pn;
 	char *cp;
 
 	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
@@ -696,10 +767,14 @@
 	cp = (char *)pqp + 31;
 	pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
 	bau_tablesp->va_queue_first = pqp;
+	/*
+	 * need the pnode of where the memory was really allocated
+	 */
+	pa = uv_gpa(pqp);
+	pn = pa >> uv_nshift;
 	uv_write_global_mmr64(pnode,
 			      UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
-			      ((unsigned long)pnode <<
-			       UV_PAYLOADQ_PNODE_SHIFT) |
+			      ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
 			      uv_physnodeaddr(pqp));
 	uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
 			      uv_physnodeaddr(pqp));
@@ -715,8 +790,9 @@
 /*
  * Initialization of each UV blade's structures
  */
-static int __init uv_init_blade(int blade, int node, int cur_cpu)
+static int __init uv_init_blade(int blade)
 {
+	int node;
 	int pnode;
 	unsigned long pa;
 	unsigned long apicid;
@@ -724,16 +800,17 @@
 	struct bau_payload_queue_entry *pqp;
 	struct bau_control *bau_tablesp;
 
+	node = blade_to_first_node(blade);
 	bau_tablesp = uv_table_bases_init(blade, node);
 	pnode = uv_blade_to_pnode(blade);
 	adp = uv_activation_descriptor_init(node, pnode);
 	pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
-	uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+	uv_table_bases_finish(blade, bau_tablesp, adp);
 	/*
 	 * the below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS
 	 */
-	apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+	apicid = blade_to_first_apicid(blade);
 	pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
 	if ((pa & 0xff) != UV_BAU_MESSAGE) {
 		uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
@@ -748,9 +825,7 @@
 static int __init uv_bau_init(void)
 {
 	int blade;
-	int node;
 	int nblades;
-	int last_blade;
 	int cur_cpu;
 
 	if (!is_uv_system())
@@ -763,29 +838,21 @@
 	uv_bau_retry_limit = 1;
 	uv_nshift = uv_hub_info->n_val;
 	uv_mmask = (1UL << uv_hub_info->n_val) - 1;
-	nblades = 0;
-	last_blade = -1;
-	cur_cpu = 0;
-	for_each_online_node(node) {
-		blade = uv_node_to_blade_id(node);
-		if (blade == last_blade)
-			continue;
-		last_blade = blade;
-		nblades++;
-	}
+	nblades = uv_num_possible_blades();
+
 	uv_bau_table_bases = (struct bau_control **)
 	    kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
 	BUG_ON(!uv_bau_table_bases);
 
-	last_blade = -1;
-	for_each_online_node(node) {
-		blade = uv_node_to_blade_id(node);
-		if (blade == last_blade)
-			continue;
-		last_blade = blade;
-		uv_init_blade(blade, node, cur_cpu);
-		cur_cpu += uv_blade_nr_possible_cpus(blade);
-	}
+	uv_partition_base_pnode = 0x7fffffff;
+	for (blade = 0; blade < nblades; blade++)
+		if (uv_blade_nr_possible_cpus(blade) &&
+			(uv_blade_to_pnode(blade) < uv_partition_base_pnode))
+			uv_partition_base_pnode = uv_blade_to_pnode(blade);
+	for (blade = 0; blade < nblades; blade++)
+		if (uv_blade_nr_possible_cpus(blade))
+			uv_init_blade(blade);
+
 	alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
 	uv_enable_timeouts();
 
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 7a567eb..d57de05 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -699,7 +699,7 @@
  * code, which is necessary to support wrapping clocksources like pm
  * timer.
  */
-static cycle_t read_tsc(void)
+static cycle_t read_tsc(struct clocksource *cs)
 {
 	cycle_t ret = (cycle_t)get_cycles();
 
diff --git a/arch/x86/kernel/uv_sysfs.c b/arch/x86/kernel/uv_sysfs.c
index 67f9b9d..36afb98 100644
--- a/arch/x86/kernel/uv_sysfs.c
+++ b/arch/x86/kernel/uv_sysfs.c
@@ -21,6 +21,7 @@
 
 #include <linux/sysdev.h>
 #include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
 
 struct kobject *sgi_uv_kobj;
 
@@ -47,6 +48,9 @@
 {
 	unsigned long ret;
 
+	if (!is_uv_system())
+		return -ENODEV;
+
 	if (!sgi_uv_kobj)
 		sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj);
 	if (!sgi_uv_kobj) {
diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c
index 2ffb6c5..583f11d 100644
--- a/arch/x86/kernel/uv_time.c
+++ b/arch/x86/kernel/uv_time.c
@@ -29,7 +29,7 @@
 
 #define RTC_NAME		"sgi_rtc"
 
-static cycle_t uv_read_rtc(void);
+static cycle_t uv_read_rtc(struct clocksource *cs);
 static int uv_rtc_next_event(unsigned long, struct clock_event_device *);
 static void uv_rtc_timer_setup(enum clock_event_mode,
 				struct clock_event_device *);
@@ -123,7 +123,7 @@
 	/* Initialize comparator value */
 	uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires);
 
-	return (expires < uv_read_rtc() && !uv_intr_pending(pnode));
+	return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode));
 }
 
 /*
@@ -256,7 +256,7 @@
 
 	spin_lock_irqsave(&head->lock, flags);
 
-	if (head->next_cpu == bcpu && uv_read_rtc() >= *t)
+	if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t)
 		rc = 1;
 
 	*t = ULLONG_MAX;
@@ -278,7 +278,7 @@
 /*
  * Read the RTC.
  */
-static cycle_t uv_read_rtc(void)
+static cycle_t uv_read_rtc(struct clocksource *cs)
 {
 	return (cycle_t)uv_read_local_mmr(UVH_RTC);
 }
@@ -291,7 +291,7 @@
 {
 	int ced_cpu = cpumask_first(ced->cpumask);
 
-	return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc());
+	return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL));
 }
 
 /*
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index d303369..2b3eb82 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -283,7 +283,7 @@
 /** vmi clocksource */
 static struct clocksource clocksource_vmi;
 
-static cycle_t read_real_cycles(void)
+static cycle_t read_real_cycles(struct clocksource *cs)
 {
 	cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
 	return max(ret, clocksource_vmi.cycle_last);
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 0a5b04a..c5ee17e 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -89,7 +89,7 @@
 
 	if (!used_math())
 		return 0;
-	clear_used_math(); /* trigger finit */
+
 	if (task_thread_info(tsk)->status & TS_USEDFPU) {
 		/*
 	 	 * Start with clearing the user buffer. This will present a
@@ -114,6 +114,8 @@
 			return -1;
 	}
 
+	clear_used_math(); /* trigger finit */
+
 	if (task_thread_info(tsk)->status & TS_XSAVE) {
 		struct _fpstate __user *fx = buf;
 		struct _xstate __user *x = buf;
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 2a36f7f..b6caf13 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1248,7 +1248,7 @@
 	pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
 	sp->gfn = gfn;
 	sp->role = role;
-	sp->global = role.cr4_pge;
+	sp->global = 0;
 	hlist_add_head(&sp->hash_link, bucket);
 	if (!direct) {
 		if (rmap_write_protect(vcpu->kvm, gfn))
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 8ca100a..7c1ce5a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2775,6 +2775,9 @@
 
 void kvm_arch_exit(void)
 {
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block,
+					    CPUFREQ_TRANSITION_NOTIFIER);
 	kvm_x86_ops = NULL;
 	kvm_mmu_module_exit();
 }
@@ -4159,6 +4162,11 @@
 
 void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 {
+	if (vcpu->arch.time_page) {
+		kvm_release_page_dirty(vcpu->arch.time_page);
+		vcpu->arch.time_page = NULL;
+	}
+
 	kvm_x86_ops->vcpu_free(vcpu);
 }
 
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index e94a11e..ca7ec44 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -273,15 +273,15 @@
  * controls the entire thing and the Guest asks it to make changes using the
  * LOAD_GDT hypercall.
  *
- * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
- * hypercall and use that repeatedly to load a new IDT.  I don't think it
- * really matters, but wouldn't it be nice if they were the same?  Wouldn't
- * it be even better if you were the one to send the patch to fix it?
+ * This is the exactly like the IDT code.
  */
 static void lguest_load_gdt(const struct desc_ptr *desc)
 {
-	BUG_ON((desc->size + 1) / 8 != GDT_ENTRIES);
-	kvm_hypercall2(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES);
+	unsigned int i;
+	struct desc_struct *gdt = (void *)desc->address;
+
+	for (i = 0; i < (desc->size+1)/8; i++)
+		kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
 }
 
 /* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
@@ -291,7 +291,9 @@
 				   const void *desc, int type)
 {
 	native_write_gdt_entry(dt, entrynum, desc, type);
-	kvm_hypercall2(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES);
+	/* Tell Host about this new entry. */
+	kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum,
+		       dt[entrynum].a, dt[entrynum].b);
 }
 
 /* OK, I lied.  There are three "thread local storage" GDT entries which change
@@ -661,7 +663,7 @@
 
 /* If we can't use the TSC, the kernel falls back to our lower-priority
  * "lguest_clock", where we read the time value given to us by the Host. */
-static cycle_t lguest_clock_read(void)
+static cycle_t lguest_clock_read(struct clocksource *cs)
 {
 	unsigned long sec, nsec;
 
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 09daebf..8a45093 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -280,15 +280,16 @@
 		return NULL;
 	area->phys_addr = phys_addr;
 	vaddr = (unsigned long) area->addr;
-	if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+
+	if (kernel_map_sync_memtype(phys_addr, size, prot_val)) {
 		free_memtype(phys_addr, phys_addr + size);
 		free_vm_area(area);
 		return NULL;
 	}
 
-	if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+	if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
 		free_memtype(phys_addr, phys_addr + size);
-		vunmap(area->addr);
+		free_vm_area(area);
 		return NULL;
 	}
 
@@ -374,7 +375,8 @@
 	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
 	 * - Inherit from confliting mappings otherwise
 	 */
-	err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+	err = reserve_memtype(phys_addr, phys_addr + size,
+				_PAGE_CACHE_WB, &flags);
 	if (err < 0)
 		return NULL;
 
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index 3daefa0..d253006 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -257,7 +257,7 @@
 }
 #endif
 
-static unsigned long calculate_numa_remap_pages(void)
+static __init unsigned long calculate_numa_remap_pages(void)
 {
 	int nid;
 	unsigned long size, reserve_pages = 0;
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index d73aaa8..2d05a12 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -188,6 +188,9 @@
 	const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
 	int nid;
 
+	if (!end)
+		return;
+
 	start = roundup(start, ZONE_ALIGN);
 
 	printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index d71e1b6..797f9f1 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -945,71 +945,94 @@
 
 int set_memory_uc(unsigned long addr, int numpages)
 {
+	int ret;
+
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
-			    _PAGE_CACHE_UC_MINUS, NULL))
-		return -EINVAL;
+	ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+			    _PAGE_CACHE_UC_MINUS, NULL);
+	if (ret)
+		goto out_err;
 
-	return _set_memory_uc(addr, numpages);
+	ret = _set_memory_uc(addr, numpages);
+	if (ret)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_uc);
 
 int set_memory_array_uc(unsigned long *addr, int addrinarray)
 {
-	unsigned long start;
-	unsigned long end;
-	int i;
+	int i, j;
+	int ret;
+
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
 	for (i = 0; i < addrinarray; i++) {
-		start = __pa(addr[i]);
-		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
-			goto out;
+		ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
+					_PAGE_CACHE_UC_MINUS, NULL);
+		if (ret)
+			goto out_free;
 	}
 
-	return change_page_attr_set(addr, addrinarray,
+	ret = change_page_attr_set(addr, addrinarray,
 				    __pgprot(_PAGE_CACHE_UC_MINUS), 1);
-out:
-	for (i = 0; i < addrinarray; i++) {
-		unsigned long tmp = __pa(addr[i]);
+	if (ret)
+		goto out_free;
 
-		if (tmp == start)
-			break;
-		for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		free_memtype(tmp, end);
-	}
-	return -EINVAL;
+	return 0;
+
+out_free:
+	for (j = 0; j < i; j++)
+		free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE);
+
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_array_uc);
 
 int _set_memory_wc(unsigned long addr, int numpages)
 {
-	return change_page_attr_set(&addr, numpages,
+	int ret;
+	ret = change_page_attr_set(&addr, numpages,
+				    __pgprot(_PAGE_CACHE_UC_MINUS), 0);
+
+	if (!ret) {
+		ret = change_page_attr_set(&addr, numpages,
 				    __pgprot(_PAGE_CACHE_WC), 0);
+	}
+	return ret;
 }
 
 int set_memory_wc(unsigned long addr, int numpages)
 {
+	int ret;
+
 	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
-	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
-		_PAGE_CACHE_WC, NULL))
-		return -EINVAL;
+	ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+		_PAGE_CACHE_WC, NULL);
+	if (ret)
+		goto out_err;
 
-	return _set_memory_wc(addr, numpages);
+	ret = _set_memory_wc(addr, numpages);
+	if (ret)
+		goto out_free;
+
+	return 0;
+
+out_free:
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+	return ret;
 }
 EXPORT_SYMBOL(set_memory_wc);
 
@@ -1021,29 +1044,31 @@
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
-	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+	int ret;
 
-	return _set_memory_wb(addr, numpages);
+	ret = _set_memory_wb(addr, numpages);
+	if (ret)
+		return ret;
+
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+	return 0;
 }
 EXPORT_SYMBOL(set_memory_wb);
 
 int set_memory_array_wb(unsigned long *addr, int addrinarray)
 {
 	int i;
+	int ret;
 
-	for (i = 0; i < addrinarray; i++) {
-		unsigned long start = __pa(addr[i]);
-		unsigned long end;
-
-		for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
-			if (end != __pa(addr[i + 1]))
-				break;
-			i++;
-		}
-		free_memtype(start, end);
-	}
-	return change_page_attr_clear(addr, addrinarray,
+	ret = change_page_attr_clear(addr, addrinarray,
 				      __pgprot(_PAGE_CACHE_MASK), 1);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < addrinarray; i++)
+		free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE);
+
+	return 0;
 }
 EXPORT_SYMBOL(set_memory_array_wb);
 
@@ -1136,6 +1161,8 @@
 
 	retval = cpa_clear_pages_array(pages, addrinarray,
 			__pgprot(_PAGE_CACHE_MASK));
+	if (retval)
+		return retval;
 
 	for (i = 0; i < addrinarray; i++) {
 		start = (unsigned long)page_address(pages[i]);
@@ -1143,7 +1170,7 @@
 		free_memtype(start, end);
 	}
 
-	return retval;
+	return 0;
 }
 EXPORT_SYMBOL(set_pages_array_wb);
 
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index c009a24..e6718bb 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -182,10 +182,10 @@
 		u8 mtrr_type;
 
 		mtrr_type = mtrr_type_lookup(start, end);
-		if (mtrr_type == MTRR_TYPE_UNCACHABLE)
-			return _PAGE_CACHE_UC;
-		if (mtrr_type == MTRR_TYPE_WRCOMB)
-			return _PAGE_CACHE_WC;
+		if (mtrr_type != MTRR_TYPE_WRBACK)
+			return _PAGE_CACHE_UC_MINUS;
+
+		return _PAGE_CACHE_WB;
 	}
 
 	return req_type;
@@ -352,23 +352,13 @@
 		return 0;
 	}
 
-	if (req_type == -1) {
-		/*
-		 * Call mtrr_lookup to get the type hint. This is an
-		 * optimization for /dev/mem mmap'ers into WB memory (BIOS
-		 * tools and ACPI tools). Use WB request for WB memory and use
-		 * UC_MINUS otherwise.
-		 */
-		u8 mtrr_type = mtrr_type_lookup(start, end);
-
-		if (mtrr_type == MTRR_TYPE_WRBACK)
-			actual_type = _PAGE_CACHE_WB;
-		else
-			actual_type = _PAGE_CACHE_UC_MINUS;
-	} else {
-		actual_type = pat_x_mtrr_type(start, end,
-					      req_type & _PAGE_CACHE_MASK);
-	}
+	/*
+	 * Call mtrr_lookup to get the type hint. This is an
+	 * optimization for /dev/mem mmap'ers into WB memory (BIOS
+	 * tools and ACPI tools). Use WB request for WB memory and use
+	 * UC_MINUS otherwise.
+	 */
+	actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK);
 
 	if (new_type)
 		*new_type = actual_type;
@@ -546,9 +536,7 @@
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
-	u64 offset = ((u64) pfn) << PAGE_SHIFT;
-	unsigned long flags = -1;
-	int retval;
+	unsigned long flags = _PAGE_CACHE_WB;
 
 	if (!range_is_allowed(pfn, size))
 		return 0;
@@ -576,64 +564,11 @@
 	}
 #endif
 
-	/*
-	 * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
-	 *
-	 * Without O_SYNC, we want to get
-	 * - WB for WB-able memory and no other conflicting mappings
-	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
-	 * - Inherit from confliting mappings otherwise
-	 */
-	if (flags != -1) {
-		retval = reserve_memtype(offset, offset + size, flags, NULL);
-	} else {
-		retval = reserve_memtype(offset, offset + size, -1, &flags);
-	}
-
-	if (retval < 0)
-		return 0;
-
-	if (((pfn < max_low_pfn_mapped) ||
-	     (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
-	    ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
-		free_memtype(offset, offset + size);
-		printk(KERN_INFO
-		"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
-			current->comm, current->pid,
-			cattr_name(flags),
-			offset, (unsigned long long)(offset + size));
-		return 0;
-	}
-
 	*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
 			     flags);
 	return 1;
 }
 
-void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
-	unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
-	u64 addr = (u64)pfn << PAGE_SHIFT;
-	unsigned long flags;
-
-	reserve_memtype(addr, addr + size, want_flags, &flags);
-	if (flags != want_flags) {
-		printk(KERN_INFO
-		"%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
-			current->comm, current->pid,
-			cattr_name(want_flags),
-			addr, (unsigned long long)(addr + size),
-			cattr_name(flags));
-	}
-}
-
-void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
-	u64 addr = (u64)pfn << PAGE_SHIFT;
-
-	free_memtype(addr, addr + size);
-}
-
 /*
  * Change the memory type for the physial address range in kernel identity
  * mapping space if that range is a part of identity map.
@@ -671,8 +606,8 @@
 {
 	int is_ram = 0;
 	int ret;
-	unsigned long flags;
 	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
+	unsigned long flags = want_flags;
 
 	is_ram = pat_pagerange_is_ram(paddr, paddr + size);
 
@@ -734,29 +669,28 @@
  *
  * If the vma has a linear pfn mapping for the entire range, we get the prot
  * from pte and reserve the entire vma range with single reserve_pfn_range call.
- * Otherwise, we reserve the entire vma range, my ging through the PTEs page
- * by page to get physical address and protection.
  */
 int track_pfn_vma_copy(struct vm_area_struct *vma)
 {
-	int retval = 0;
-	unsigned long i, j;
 	resource_size_t paddr;
 	unsigned long prot;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 	pgprot_t pgprot;
 
 	if (!pat_enabled)
 		return 0;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/*
 		 * reserve the whole chunk covered by vma. We need the
 		 * starting address and protection from pte.
 		 */
-		if (follow_phys(vma, vma_start, 0, &prot, &paddr)) {
+		if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
 			WARN_ON_ONCE(1);
 			return -EINVAL;
 		}
@@ -764,28 +698,7 @@
 		return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
 	}
 
-	/* reserve entire vma page by page, using pfn and prot from pte */
-	for (i = 0; i < vma_size; i += PAGE_SIZE) {
-		if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
-			continue;
-
-		pgprot = __pgprot(prot);
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
-		if (retval)
-			goto cleanup_ret;
-	}
 	return 0;
-
-cleanup_ret:
-	/* Reserve error: Cleanup partial reservation and return error */
-	for (j = 0; j < i; j += PAGE_SIZE) {
-		if (follow_phys(vma, vma_start + j, 0, &prot, &paddr))
-			continue;
-
-		free_pfn_range(paddr, PAGE_SIZE);
-	}
-
-	return retval;
 }
 
 /*
@@ -795,50 +708,28 @@
  * prot is passed in as a parameter for the new mapping. If the vma has a
  * linear pfn mapping for the entire range reserve the entire vma range with
  * single reserve_pfn_range call.
- * Otherwise, we look t the pfn and size and reserve only the specified range
- * page by page.
- *
- * Note that this function can be called with caller trying to map only a
- * subrange/page inside the vma.
  */
 int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 			unsigned long pfn, unsigned long size)
 {
-	int retval = 0;
-	unsigned long i, j;
-	resource_size_t base_paddr;
 	resource_size_t paddr;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
 	if (!pat_enabled)
 		return 0;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		return reserve_pfn_range(paddr, vma_size, prot, 0);
 	}
 
-	/* reserve page by page using pfn and size */
-	base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
-	for (i = 0; i < size; i += PAGE_SIZE) {
-		paddr = base_paddr + i;
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
-		if (retval)
-			goto cleanup_ret;
-	}
 	return 0;
-
-cleanup_ret:
-	/* Reserve error: Cleanup partial reservation and return error */
-	for (j = 0; j < i; j += PAGE_SIZE) {
-		paddr = base_paddr + j;
-		free_pfn_range(paddr, PAGE_SIZE);
-	}
-
-	return retval;
 }
 
 /*
@@ -849,39 +740,23 @@
 void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
 			unsigned long size)
 {
-	unsigned long i;
 	resource_size_t paddr;
-	unsigned long prot;
-	unsigned long vma_start = vma->vm_start;
-	unsigned long vma_end = vma->vm_end;
-	unsigned long vma_size = vma_end - vma_start;
+	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
 	if (!pat_enabled)
 		return;
 
+	/*
+	 * For now, only handle remap_pfn_range() vmas where
+	 * is_linear_pfn_mapping() == TRUE. Handling of
+	 * vm_insert_pfn() is TBD.
+	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* free the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		free_pfn_range(paddr, vma_size);
 		return;
 	}
-
-	if (size != 0 && size != vma_size) {
-		/* free page by page, using pfn and size */
-		paddr = (resource_size_t)pfn << PAGE_SHIFT;
-		for (i = 0; i < size; i += PAGE_SIZE) {
-			paddr = paddr + i;
-			free_pfn_range(paddr, PAGE_SIZE);
-		}
-	} else {
-		/* free entire vma, page by page, using the pfn from pte */
-		for (i = 0; i < vma_size; i += PAGE_SIZE) {
-			if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
-				continue;
-
-			free_pfn_range(paddr, PAGE_SIZE);
-		}
-	}
 }
 
 pgprot_t pgprot_writecombine(pgprot_t prot)
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index c7d272b..33c5fa5 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -28,6 +28,7 @@
 static struct acpi_table_slit *acpi_slit;
 
 static nodemask_t nodes_parsed __initdata;
+static nodemask_t cpu_nodes_parsed __initdata;
 static struct bootnode nodes[MAX_NUMNODES] __initdata;
 static struct bootnode nodes_add[MAX_NUMNODES];
 static int found_add_area __initdata;
@@ -141,6 +142,7 @@
 
 	apic_id = pa->apic_id;
 	apicid_to_node[apic_id] = node;
+	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
 	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
 	       pxm, apic_id, node);
@@ -174,6 +176,7 @@
 	else
 		apic_id = pa->apic_id;
 	apicid_to_node[apic_id] = node;
+	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
 	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
 	       pxm, apic_id, node);
@@ -402,7 +405,8 @@
 		return -1;
 	}
 
-	node_possible_map = nodes_parsed;
+	/* Account for nodes with cpus and no memory */
+	nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
 
 	/* Finally register nodes */
 	for_each_node_mask(i, node_possible_map)
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 14f2406..0a5aa44 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -213,6 +213,11 @@
 	return ret;
 }
 
+static cycle_t xen_clocksource_get_cycles(struct clocksource *cs)
+{
+	return xen_clocksource_read();
+}
+
 static void xen_read_wallclock(struct timespec *ts)
 {
 	struct shared_info *s = HYPERVISOR_shared_info;
@@ -241,7 +246,7 @@
 static struct clocksource xen_clocksource __read_mostly = {
 	.name = "xen",
 	.rating = 400,
-	.read = xen_clocksource_read,
+	.read = xen_clocksource_get_cycles,
 	.mask = ~0,
 	.mult = 1<<XEN_SHIFT,		/* time directly in nanoseconds */
 	.shift = XEN_SHIFT,
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 0817f9d..d9ddc1b 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -19,6 +19,7 @@
 #include <asm/page.h>
 #include <asm/cacheasm.h>
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 
 /*
@@ -45,7 +46,7 @@
 	 * instruction.
 	 */
 
-	.section .head.text, "ax"
+	__HEAD
 	.globl _start
 _start:	_j	2f
 	.align	4
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index c1be9a4..5accf51 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -85,8 +85,8 @@
 
   .text :
   {
-    /* The .head.text section must be the first section! */
-    *(.head.text)
+    /* The HEAD_TEXT section must be the first section! */
+    HEAD_TEXT
     *(.literal .text)
     VMLINUX_SYMBOL(__sched_text_start) = .;
     *(.sched.literal .sched.text)
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 631f6f4..c48fa67 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -17,9 +17,6 @@
 #include <linux/rbtree.h>
 #include <linux/interrupt.h>
 
-#define REQ_SYNC	1
-#define REQ_ASYNC	0
-
 /*
  * See Documentation/block/as-iosched.txt
  */
@@ -93,7 +90,7 @@
 	struct list_head fifo_list[2];
 
 	struct request *next_rq[2];	/* next in sort order */
-	sector_t last_sector[2];	/* last REQ_SYNC & REQ_ASYNC sectors */
+	sector_t last_sector[2];	/* last SYNC & ASYNC sectors */
 
 	unsigned long exit_prob;	/* probability a task will exit while
 					   being waited on */
@@ -109,7 +106,7 @@
 	unsigned long last_check_fifo[2];
 	int changed_batch;		/* 1: waiting for old batch to end */
 	int new_batch;			/* 1: waiting on first read complete */
-	int batch_data_dir;		/* current batch REQ_SYNC / REQ_ASYNC */
+	int batch_data_dir;		/* current batch SYNC / ASYNC */
 	int write_batch_count;		/* max # of reqs in a write batch */
 	int current_write_count;	/* how many requests left this batch */
 	int write_batch_idled;		/* has the write batch gone idle? */
@@ -554,7 +551,7 @@
 	if (aic == NULL)
 		return;
 
-	if (data_dir == REQ_SYNC) {
+	if (data_dir == BLK_RW_SYNC) {
 		unsigned long in_flight = atomic_read(&aic->nr_queued)
 					+ atomic_read(&aic->nr_dispatched);
 		spin_lock(&aic->lock);
@@ -811,7 +808,7 @@
  */
 static void update_write_batch(struct as_data *ad)
 {
-	unsigned long batch = ad->batch_expire[REQ_ASYNC];
+	unsigned long batch = ad->batch_expire[BLK_RW_ASYNC];
 	long write_time;
 
 	write_time = (jiffies - ad->current_batch_expires) + batch;
@@ -855,7 +852,7 @@
 		kblockd_schedule_work(q, &ad->antic_work);
 		ad->changed_batch = 0;
 
-		if (ad->batch_data_dir == REQ_SYNC)
+		if (ad->batch_data_dir == BLK_RW_SYNC)
 			ad->new_batch = 1;
 	}
 	WARN_ON(ad->nr_dispatched == 0);
@@ -869,7 +866,7 @@
 	if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) {
 		update_write_batch(ad);
 		ad->current_batch_expires = jiffies +
-				ad->batch_expire[REQ_SYNC];
+				ad->batch_expire[BLK_RW_SYNC];
 		ad->new_batch = 0;
 	}
 
@@ -960,7 +957,7 @@
 	if (ad->changed_batch || ad->new_batch)
 		return 0;
 
-	if (ad->batch_data_dir == REQ_SYNC)
+	if (ad->batch_data_dir == BLK_RW_SYNC)
 		/* TODO! add a check so a complete fifo gets written? */
 		return time_after(jiffies, ad->current_batch_expires);
 
@@ -986,7 +983,7 @@
 	 */
 	ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
 
-	if (data_dir == REQ_SYNC) {
+	if (data_dir == BLK_RW_SYNC) {
 		struct io_context *ioc = RQ_IOC(rq);
 		/* In case we have to anticipate after this */
 		copy_io_context(&ad->io_context, &ioc);
@@ -1025,41 +1022,41 @@
 static int as_dispatch_request(struct request_queue *q, int force)
 {
 	struct as_data *ad = q->elevator->elevator_data;
-	const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]);
-	const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]);
+	const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]);
+	const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]);
 	struct request *rq;
 
 	if (unlikely(force)) {
 		/*
 		 * Forced dispatch, accounting is useless.  Reset
 		 * accounting states and dump fifo_lists.  Note that
-		 * batch_data_dir is reset to REQ_SYNC to avoid
+		 * batch_data_dir is reset to BLK_RW_SYNC to avoid
 		 * screwing write batch accounting as write batch
 		 * accounting occurs on W->R transition.
 		 */
 		int dispatched = 0;
 
-		ad->batch_data_dir = REQ_SYNC;
+		ad->batch_data_dir = BLK_RW_SYNC;
 		ad->changed_batch = 0;
 		ad->new_batch = 0;
 
-		while (ad->next_rq[REQ_SYNC]) {
-			as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]);
+		while (ad->next_rq[BLK_RW_SYNC]) {
+			as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]);
 			dispatched++;
 		}
-		ad->last_check_fifo[REQ_SYNC] = jiffies;
+		ad->last_check_fifo[BLK_RW_SYNC] = jiffies;
 
-		while (ad->next_rq[REQ_ASYNC]) {
-			as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]);
+		while (ad->next_rq[BLK_RW_ASYNC]) {
+			as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]);
 			dispatched++;
 		}
-		ad->last_check_fifo[REQ_ASYNC] = jiffies;
+		ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
 
 		return dispatched;
 	}
 
 	/* Signal that the write batch was uncontended, so we can't time it */
-	if (ad->batch_data_dir == REQ_ASYNC && !reads) {
+	if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) {
 		if (ad->current_write_count == 0 || !writes)
 			ad->write_batch_idled = 1;
 	}
@@ -1076,8 +1073,8 @@
 		 */
 		rq = ad->next_rq[ad->batch_data_dir];
 
-		if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) {
-			if (as_fifo_expired(ad, REQ_SYNC))
+		if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) {
+			if (as_fifo_expired(ad, BLK_RW_SYNC))
 				goto fifo_expired;
 
 			if (as_can_anticipate(ad, rq)) {
@@ -1090,7 +1087,7 @@
 			/* we have a "next request" */
 			if (reads && !writes)
 				ad->current_batch_expires =
-					jiffies + ad->batch_expire[REQ_SYNC];
+					jiffies + ad->batch_expire[BLK_RW_SYNC];
 			goto dispatch_request;
 		}
 	}
@@ -1101,20 +1098,20 @@
 	 */
 
 	if (reads) {
-		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC]));
+		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC]));
 
-		if (writes && ad->batch_data_dir == REQ_SYNC)
+		if (writes && ad->batch_data_dir == BLK_RW_SYNC)
 			/*
 			 * Last batch was a read, switch to writes
 			 */
 			goto dispatch_writes;
 
-		if (ad->batch_data_dir == REQ_ASYNC) {
+		if (ad->batch_data_dir == BLK_RW_ASYNC) {
 			WARN_ON(ad->new_batch);
 			ad->changed_batch = 1;
 		}
-		ad->batch_data_dir = REQ_SYNC;
-		rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next);
+		ad->batch_data_dir = BLK_RW_SYNC;
+		rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next);
 		ad->last_check_fifo[ad->batch_data_dir] = jiffies;
 		goto dispatch_request;
 	}
@@ -1125,9 +1122,9 @@
 
 	if (writes) {
 dispatch_writes:
-		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC]));
+		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC]));
 
-		if (ad->batch_data_dir == REQ_SYNC) {
+		if (ad->batch_data_dir == BLK_RW_SYNC) {
 			ad->changed_batch = 1;
 
 			/*
@@ -1137,11 +1134,11 @@
 			 */
 			ad->new_batch = 0;
 		}
-		ad->batch_data_dir = REQ_ASYNC;
+		ad->batch_data_dir = BLK_RW_ASYNC;
 		ad->current_write_count = ad->write_batch_count;
 		ad->write_batch_idled = 0;
-		rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next);
-		ad->last_check_fifo[REQ_ASYNC] = jiffies;
+		rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next);
+		ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
 		goto dispatch_request;
 	}
 
@@ -1164,9 +1161,9 @@
 		if (ad->nr_dispatched)
 			return 0;
 
-		if (ad->batch_data_dir == REQ_ASYNC)
+		if (ad->batch_data_dir == BLK_RW_ASYNC)
 			ad->current_batch_expires = jiffies +
-					ad->batch_expire[REQ_ASYNC];
+					ad->batch_expire[BLK_RW_ASYNC];
 		else
 			ad->new_batch = 1;
 
@@ -1238,8 +1235,8 @@
 {
 	struct as_data *ad = q->elevator->elevator_data;
 
-	return list_empty(&ad->fifo_list[REQ_ASYNC])
-		&& list_empty(&ad->fifo_list[REQ_SYNC]);
+	return list_empty(&ad->fifo_list[BLK_RW_ASYNC])
+		&& list_empty(&ad->fifo_list[BLK_RW_SYNC]);
 }
 
 static int
@@ -1346,8 +1343,8 @@
 	del_timer_sync(&ad->antic_timer);
 	cancel_work_sync(&ad->antic_work);
 
-	BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC]));
-	BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC]));
+	BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC]));
+	BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC]));
 
 	put_io_context(ad->io_context);
 	kfree(ad);
@@ -1372,18 +1369,18 @@
 	init_timer(&ad->antic_timer);
 	INIT_WORK(&ad->antic_work, as_work_handler);
 
-	INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]);
-	INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]);
-	ad->sort_list[REQ_SYNC] = RB_ROOT;
-	ad->sort_list[REQ_ASYNC] = RB_ROOT;
-	ad->fifo_expire[REQ_SYNC] = default_read_expire;
-	ad->fifo_expire[REQ_ASYNC] = default_write_expire;
+	INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]);
+	INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]);
+	ad->sort_list[BLK_RW_SYNC] = RB_ROOT;
+	ad->sort_list[BLK_RW_ASYNC] = RB_ROOT;
+	ad->fifo_expire[BLK_RW_SYNC] = default_read_expire;
+	ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire;
 	ad->antic_expire = default_antic_expire;
-	ad->batch_expire[REQ_SYNC] = default_read_batch_expire;
-	ad->batch_expire[REQ_ASYNC] = default_write_batch_expire;
+	ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire;
+	ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire;
 
-	ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC];
-	ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10;
+	ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC];
+	ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10;
 	if (ad->write_batch_count < 2)
 		ad->write_batch_count = 2;
 
@@ -1432,11 +1429,11 @@
 	struct as_data *ad = e->elevator_data;			\
 	return as_var_show(jiffies_to_msecs((__VAR)), (page));	\
 }
-SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]);
 SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire);
-SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]);
 #undef SHOW_FUNCTION
 
 #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX)				\
@@ -1451,13 +1448,14 @@
 	*(__PTR) = msecs_to_jiffies(*(__PTR));				\
 	return ret;							\
 }
-STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX);
-STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX);
+STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX);
+STORE_FUNCTION(as_write_expire_store,
+			&ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX);
 STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX);
 STORE_FUNCTION(as_read_batch_expire_store,
-			&ad->batch_expire[REQ_SYNC], 0, INT_MAX);
+			&ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX);
 STORE_FUNCTION(as_write_batch_expire_store,
-			&ad->batch_expire[REQ_ASYNC], 0, INT_MAX);
+			&ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX);
 #undef STORE_FUNCTION
 
 #define AS_ATTR(name) \
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index f7dae57..20b4111 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -319,9 +319,6 @@
 		return -ENXIO;
 
 	bio = bio_alloc(GFP_KERNEL, 0);
-	if (!bio)
-		return -ENOMEM;
-
 	bio->bi_end_io = bio_end_empty_barrier;
 	bio->bi_private = &wait;
 	bio->bi_bdev = bdev;
diff --git a/block/blk-core.c b/block/blk-core.c
index 07ab754..2998fe3 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -643,7 +643,7 @@
 }
 
 static struct request *
-blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask)
+blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
 {
 	struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
 
@@ -652,7 +652,7 @@
 
 	blk_rq_init(q, rq);
 
-	rq->cmd_flags = rw | REQ_ALLOCED;
+	rq->cmd_flags = flags | REQ_ALLOCED;
 
 	if (priv) {
 		if (unlikely(elv_set_request(q, rq, gfp_mask))) {
@@ -792,6 +792,8 @@
 	if (priv)
 		rl->elvpriv++;
 
+	if (blk_queue_io_stat(q))
+		rw_flags |= REQ_IO_STAT;
 	spin_unlock_irq(q->queue_lock);
 
 	rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 63760ca..23d2a6f 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -402,7 +402,10 @@
 
 	elv_merge_requests(q, req, next);
 
-	blk_account_io_merge(req);
+	/*
+	 * 'next' is going away, so update stats accordingly
+	 */
+	blk_account_io_merge(next);
 
 	req->ioprio = ioprio_best(req->ioprio, next->ioprio);
 	if (blk_rq_cpu_valid(next))
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 69c42ad..57af728 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -156,26 +156,28 @@
 
 /**
  * blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q:  the request queue for the device
- * @dma_addr:   bus address limit
+ * @q: the request queue for the device
+ * @dma_mask: the maximum address the device can handle
  *
  * Description:
  *    Different hardware can have different requirements as to what pages
  *    it can do I/O directly to. A low level driver can call
  *    blk_queue_bounce_limit to have lower memory pages allocated as bounce
- *    buffers for doing I/O to pages residing above @dma_addr.
+ *    buffers for doing I/O to pages residing above @dma_mask.
  **/
-void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr)
+void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
 {
-	unsigned long b_pfn = dma_addr >> PAGE_SHIFT;
+	unsigned long b_pfn = dma_mask >> PAGE_SHIFT;
 	int dma = 0;
 
 	q->bounce_gfp = GFP_NOIO;
 #if BITS_PER_LONG == 64
-	/* Assume anything <= 4GB can be handled by IOMMU.
-	   Actually some IOMMUs can handle everything, but I don't
-	   know of a way to test this here. */
-	if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+	/*
+	 * Assume anything <= 4GB can be handled by IOMMU.  Actually
+	 * some IOMMUs can handle everything, but I don't know of a
+	 * way to test this here.
+	 */
+	if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
 		dma = 1;
 	q->bounce_pfn = max_low_pfn;
 #else
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 73f36be..3ff9bba 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -209,14 +209,10 @@
 	ssize_t ret = queue_var_store(&stats, page, count);
 
 	spin_lock_irq(q->queue_lock);
-	elv_quisce_start(q);
-
 	if (stats)
 		queue_flag_set(QUEUE_FLAG_IO_STAT, q);
 	else
 		queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
-
-	elv_quisce_end(q);
 	spin_unlock_irq(q->queue_lock);
 
 	return ret;
diff --git a/block/blk-timeout.c b/block/blk-timeout.c
index bbbdc4b..1ec0d50 100644
--- a/block/blk-timeout.c
+++ b/block/blk-timeout.c
@@ -211,6 +211,12 @@
 	struct request *rq, *tmp;
 	LIST_HEAD(list);
 
+	/*
+	 * Not a request based block device, nothing to abort
+	 */
+	if (!q->request_fn)
+		return;
+
 	spin_lock_irqsave(q->queue_lock, flags);
 
 	elv_abort_queue(q);
@@ -224,6 +230,13 @@
 	list_for_each_entry_safe(rq, tmp, &list, timeout_list)
 		blk_abort_request(rq);
 
+	/*
+	 * Occasionally, blk_abort_request() will return without
+	 * deleting the element from the list. Make sure we add those back
+	 * instead of leaving them on the local stack list.
+	 */
+	list_splice(&list, &q->timeout_list);
+
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 }
diff --git a/block/blk.h b/block/blk.h
index 24fcaee..79c85f7 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -70,8 +70,8 @@
 
 int blk_dev_init(void);
 
-void elv_quisce_start(struct request_queue *q);
-void elv_quisce_end(struct request_queue *q);
+void elv_quiesce_start(struct request_queue *q);
+void elv_quiesce_end(struct request_queue *q);
 
 
 /*
@@ -114,12 +114,7 @@
 
 static inline int blk_do_io_stat(struct request *rq)
 {
-	struct gendisk *disk = rq->rq_disk;
-
-	if (!disk || !disk->queue)
-		return 0;
-
-	return blk_queue_io_stat(disk->queue) && (rq->cmd_flags & REQ_ELVPRIV);
+	return rq->rq_disk && blk_rq_io_stat(rq);
 }
 
 #endif
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index a4809de..a55a9bd 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -56,9 +56,6 @@
 #define cfq_class_idle(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
 #define cfq_class_rt(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
 
-#define ASYNC			(0)
-#define SYNC			(1)
-
 #define sample_valid(samples)	((samples) > 80)
 
 /*
@@ -83,6 +80,14 @@
 	 * rr list of queues with requests and the count of them
 	 */
 	struct cfq_rb_root service_tree;
+
+	/*
+	 * Each priority tree is sorted by next_request position.  These
+	 * trees are used when determining if two or more queues are
+	 * interleaving requests (see cfq_close_cooperator).
+	 */
+	struct rb_root prio_trees[CFQ_PRIO_LISTS];
+
 	unsigned int busy_queues;
 	/*
 	 * Used to track any pending rt requests so we can pre-empt current
@@ -147,6 +152,10 @@
 	struct rb_node rb_node;
 	/* service_tree key */
 	unsigned long rb_key;
+	/* prio tree member */
+	struct rb_node p_node;
+	/* prio tree root we belong to, if any */
+	struct rb_root *p_root;
 	/* sorted list of pending requests */
 	struct rb_root sort_list;
 	/* if fifo isn't expired, next request to serve */
@@ -185,6 +194,7 @@
 	CFQ_CFQQ_FLAG_prio_changed,	/* task priority has changed */
 	CFQ_CFQQ_FLAG_slice_new,	/* no requests dispatched in slice */
 	CFQ_CFQQ_FLAG_sync,		/* synchronous queue */
+	CFQ_CFQQ_FLAG_coop,		/* has done a coop jump of the queue */
 };
 
 #define CFQ_CFQQ_FNS(name)						\
@@ -211,6 +221,7 @@
 CFQ_CFQQ_FNS(prio_changed);
 CFQ_CFQQ_FNS(slice_new);
 CFQ_CFQQ_FNS(sync);
+CFQ_CFQQ_FNS(coop);
 #undef CFQ_CFQQ_FNS
 
 #define cfq_log_cfqq(cfqd, cfqq, fmt, args...)	\
@@ -419,13 +430,17 @@
 	return NULL;
 }
 
+static void rb_erase_init(struct rb_node *n, struct rb_root *root)
+{
+	rb_erase(n, root);
+	RB_CLEAR_NODE(n);
+}
+
 static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root)
 {
 	if (root->left == n)
 		root->left = NULL;
-
-	rb_erase(n, &root->rb);
-	RB_CLEAR_NODE(n);
+	rb_erase_init(n, &root->rb);
 }
 
 /*
@@ -470,8 +485,8 @@
  * requests waiting to be processed. It is sorted in the order that
  * we will service the queues.
  */
-static void cfq_service_tree_add(struct cfq_data *cfqd,
-				    struct cfq_queue *cfqq, int add_front)
+static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+				 int add_front)
 {
 	struct rb_node **p, *parent;
 	struct cfq_queue *__cfqq;
@@ -544,6 +559,67 @@
 	rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb);
 }
 
+static struct cfq_queue *
+cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
+		     sector_t sector, struct rb_node **ret_parent,
+		     struct rb_node ***rb_link)
+{
+	struct rb_node **p, *parent;
+	struct cfq_queue *cfqq = NULL;
+
+	parent = NULL;
+	p = &root->rb_node;
+	while (*p) {
+		struct rb_node **n;
+
+		parent = *p;
+		cfqq = rb_entry(parent, struct cfq_queue, p_node);
+
+		/*
+		 * Sort strictly based on sector.  Smallest to the left,
+		 * largest to the right.
+		 */
+		if (sector > cfqq->next_rq->sector)
+			n = &(*p)->rb_right;
+		else if (sector < cfqq->next_rq->sector)
+			n = &(*p)->rb_left;
+		else
+			break;
+		p = n;
+		cfqq = NULL;
+	}
+
+	*ret_parent = parent;
+	if (rb_link)
+		*rb_link = p;
+	return cfqq;
+}
+
+static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+	struct rb_node **p, *parent;
+	struct cfq_queue *__cfqq;
+
+	if (cfqq->p_root) {
+		rb_erase(&cfqq->p_node, cfqq->p_root);
+		cfqq->p_root = NULL;
+	}
+
+	if (cfq_class_idle(cfqq))
+		return;
+	if (!cfqq->next_rq)
+		return;
+
+	cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
+	__cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
+					 &parent, &p);
+	if (!__cfqq) {
+		rb_link_node(&cfqq->p_node, parent, p);
+		rb_insert_color(&cfqq->p_node, cfqq->p_root);
+	} else
+		cfqq->p_root = NULL;
+}
+
 /*
  * Update cfqq's position in the service tree.
  */
@@ -552,8 +628,10 @@
 	/*
 	 * Resorting requires the cfqq to be on the RR list already.
 	 */
-	if (cfq_cfqq_on_rr(cfqq))
+	if (cfq_cfqq_on_rr(cfqq)) {
 		cfq_service_tree_add(cfqd, cfqq, 0);
+		cfq_prio_tree_add(cfqd, cfqq);
+	}
 }
 
 /*
@@ -584,6 +662,10 @@
 
 	if (!RB_EMPTY_NODE(&cfqq->rb_node))
 		cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
+	if (cfqq->p_root) {
+		rb_erase(&cfqq->p_node, cfqq->p_root);
+		cfqq->p_root = NULL;
+	}
 
 	BUG_ON(!cfqd->busy_queues);
 	cfqd->busy_queues--;
@@ -613,7 +695,7 @@
 {
 	struct cfq_queue *cfqq = RQ_CFQQ(rq);
 	struct cfq_data *cfqd = cfqq->cfqd;
-	struct request *__alias;
+	struct request *__alias, *prev;
 
 	cfqq->queued[rq_is_sync(rq)]++;
 
@@ -630,7 +712,15 @@
 	/*
 	 * check if this request is a better next-serve candidate
 	 */
+	prev = cfqq->next_rq;
 	cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
+
+	/*
+	 * adjust priority tree position, if ->next_rq changes
+	 */
+	if (prev != cfqq->next_rq)
+		cfq_prio_tree_add(cfqd, cfqq);
+
 	BUG_ON(!cfqq->next_rq);
 }
 
@@ -843,11 +933,15 @@
 /*
  * Get and set a new active queue for service.
  */
-static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
+static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
+					      struct cfq_queue *cfqq)
 {
-	struct cfq_queue *cfqq;
+	if (!cfqq) {
+		cfqq = cfq_get_next_queue(cfqd);
+		if (cfqq)
+			cfq_clear_cfqq_coop(cfqq);
+	}
 
-	cfqq = cfq_get_next_queue(cfqd);
 	__cfq_set_active_queue(cfqd, cfqq);
 	return cfqq;
 }
@@ -861,28 +955,100 @@
 		return cfqd->last_position - rq->sector;
 }
 
+#define CIC_SEEK_THR	8 * 1024
+#define CIC_SEEKY(cic)	((cic)->seek_mean > CIC_SEEK_THR)
+
 static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
 {
 	struct cfq_io_context *cic = cfqd->active_cic;
+	sector_t sdist = cic->seek_mean;
 
 	if (!sample_valid(cic->seek_samples))
-		return 0;
+		sdist = CIC_SEEK_THR;
 
-	return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean;
+	return cfq_dist_from_last(cfqd, rq) <= sdist;
 }
 
-static int cfq_close_cooperator(struct cfq_data *cfq_data,
-				struct cfq_queue *cfqq)
+static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
+				    struct cfq_queue *cur_cfqq)
 {
+	struct rb_root *root = &cfqd->prio_trees[cur_cfqq->org_ioprio];
+	struct rb_node *parent, *node;
+	struct cfq_queue *__cfqq;
+	sector_t sector = cfqd->last_position;
+
+	if (RB_EMPTY_ROOT(root))
+		return NULL;
+
+	/*
+	 * First, if we find a request starting at the end of the last
+	 * request, choose it.
+	 */
+	__cfqq = cfq_prio_tree_lookup(cfqd, root, sector, &parent, NULL);
+	if (__cfqq)
+		return __cfqq;
+
+	/*
+	 * If the exact sector wasn't found, the parent of the NULL leaf
+	 * will contain the closest sector.
+	 */
+	__cfqq = rb_entry(parent, struct cfq_queue, p_node);
+	if (cfq_rq_close(cfqd, __cfqq->next_rq))
+		return __cfqq;
+
+	if (__cfqq->next_rq->sector < sector)
+		node = rb_next(&__cfqq->p_node);
+	else
+		node = rb_prev(&__cfqq->p_node);
+	if (!node)
+		return NULL;
+
+	__cfqq = rb_entry(node, struct cfq_queue, p_node);
+	if (cfq_rq_close(cfqd, __cfqq->next_rq))
+		return __cfqq;
+
+	return NULL;
+}
+
+/*
+ * cfqd - obvious
+ * cur_cfqq - passed in so that we don't decide that the current queue is
+ * 	      closely cooperating with itself.
+ *
+ * So, basically we're assuming that that cur_cfqq has dispatched at least
+ * one request, and that cfqd->last_position reflects a position on the disk
+ * associated with the I/O issued by cur_cfqq.  I'm not sure this is a valid
+ * assumption.
+ */
+static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
+					      struct cfq_queue *cur_cfqq,
+					      int probe)
+{
+	struct cfq_queue *cfqq;
+
+	/*
+	 * A valid cfq_io_context is necessary to compare requests against
+	 * the seek_mean of the current cfqq.
+	 */
+	if (!cfqd->active_cic)
+		return NULL;
+
 	/*
 	 * We should notice if some of the queues are cooperating, eg
 	 * working closely on the same area of the disk. In that case,
 	 * we can group them together and don't waste time idling.
 	 */
-	return 0;
-}
+	cfqq = cfqq_close(cfqd, cur_cfqq);
+	if (!cfqq)
+		return NULL;
 
-#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024))
+	if (cfq_cfqq_coop(cfqq))
+		return NULL;
+
+	if (!probe)
+		cfq_mark_cfqq_coop(cfqq);
+	return cfqq;
+}
 
 static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 {
@@ -920,13 +1086,6 @@
 	if (!cic || !atomic_read(&cic->ioc->nr_tasks))
 		return;
 
-	/*
-	 * See if this prio level has a good candidate
-	 */
-	if (cfq_close_cooperator(cfqd, cfqq) &&
-	    (sample_valid(cic->ttime_samples) && cic->ttime_mean > 2))
-		return;
-
 	cfq_mark_cfqq_wait_request(cfqq);
 
 	/*
@@ -939,7 +1098,7 @@
 		sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT));
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
-	cfq_log(cfqd, "arm_idle: %lu", sl);
+	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
 }
 
 /*
@@ -1003,7 +1162,7 @@
  */
 static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 {
-	struct cfq_queue *cfqq;
+	struct cfq_queue *cfqq, *new_cfqq = NULL;
 
 	cfqq = cfqd->active_queue;
 	if (!cfqq)
@@ -1037,6 +1196,16 @@
 		goto keep_queue;
 
 	/*
+	 * If another queue has a request waiting within our mean seek
+	 * distance, let it run.  The expire code will check for close
+	 * cooperators and put the close queue at the front of the service
+	 * tree.
+	 */
+	new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0);
+	if (new_cfqq)
+		goto expire;
+
+	/*
 	 * No requests pending. If the active queue still has requests in
 	 * flight or is idling for a new request, allow either of these
 	 * conditions to happen (or time out) before selecting a new queue.
@@ -1050,7 +1219,7 @@
 expire:
 	cfq_slice_expired(cfqd, 0);
 new_queue:
-	cfqq = cfq_set_active_queue(cfqd);
+	cfqq = cfq_set_active_queue(cfqd, new_cfqq);
 keep_queue:
 	return cfqq;
 }
@@ -1333,14 +1502,14 @@
 	if (ioc->ioc_data == cic)
 		rcu_assign_pointer(ioc->ioc_data, NULL);
 
-	if (cic->cfqq[ASYNC]) {
-		cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
-		cic->cfqq[ASYNC] = NULL;
+	if (cic->cfqq[BLK_RW_ASYNC]) {
+		cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
+		cic->cfqq[BLK_RW_ASYNC] = NULL;
 	}
 
-	if (cic->cfqq[SYNC]) {
-		cfq_exit_cfqq(cfqd, cic->cfqq[SYNC]);
-		cic->cfqq[SYNC] = NULL;
+	if (cic->cfqq[BLK_RW_SYNC]) {
+		cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_SYNC]);
+		cic->cfqq[BLK_RW_SYNC] = NULL;
 	}
 }
 
@@ -1449,17 +1618,18 @@
 
 	spin_lock_irqsave(cfqd->queue->queue_lock, flags);
 
-	cfqq = cic->cfqq[ASYNC];
+	cfqq = cic->cfqq[BLK_RW_ASYNC];
 	if (cfqq) {
 		struct cfq_queue *new_cfqq;
-		new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC);
+		new_cfqq = cfq_get_queue(cfqd, BLK_RW_ASYNC, cic->ioc,
+						GFP_ATOMIC);
 		if (new_cfqq) {
-			cic->cfqq[ASYNC] = new_cfqq;
+			cic->cfqq[BLK_RW_ASYNC] = new_cfqq;
 			cfq_put_queue(cfqq);
 		}
 	}
 
-	cfqq = cic->cfqq[SYNC];
+	cfqq = cic->cfqq[BLK_RW_SYNC];
 	if (cfqq)
 		cfq_mark_cfqq_prio_changed(cfqq);
 
@@ -1510,6 +1680,7 @@
 		}
 
 		RB_CLEAR_NODE(&cfqq->rb_node);
+		RB_CLEAR_NODE(&cfqq->p_node);
 		INIT_LIST_HEAD(&cfqq->fifo);
 
 		atomic_set(&cfqq->ref, 0);
@@ -1745,7 +1916,9 @@
 	sector_t sdist;
 	u64 total;
 
-	if (cic->last_request_pos < rq->sector)
+	if (!cic->last_request_pos)
+		sdist = 0;
+	else if (cic->last_request_pos < rq->sector)
 		sdist = rq->sector - cic->last_request_pos;
 	else
 		sdist = cic->last_request_pos - rq->sector;
@@ -1905,10 +2078,20 @@
 		 * Remember that we saw a request from this process, but
 		 * don't start queuing just yet. Otherwise we risk seeing lots
 		 * of tiny requests, because we disrupt the normal plugging
-		 * and merging.
+		 * and merging. If the request is already larger than a single
+		 * page, let it rip immediately. For that case we assume that
+		 * merging is already done. Ditto for a busy system that
+		 * has other work pending, don't risk delaying until the
+		 * idle timer unplug to continue working.
 		 */
-		if (cfq_cfqq_wait_request(cfqq))
+		if (cfq_cfqq_wait_request(cfqq)) {
+			if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
+			    cfqd->busy_queues > 1) {
+				del_timer(&cfqd->idle_slice_timer);
+				blk_start_queueing(cfqd->queue);
+			}
 			cfq_mark_cfqq_must_dispatch(cfqq);
+		}
 	} else if (cfq_should_preempt(cfqd, cfqq, rq)) {
 		/*
 		 * not the active queue - expire current slice if it is
@@ -1992,16 +2175,24 @@
 	 * or if we want to idle in case it has no pending requests.
 	 */
 	if (cfqd->active_queue == cfqq) {
+		const bool cfqq_empty = RB_EMPTY_ROOT(&cfqq->sort_list);
+
 		if (cfq_cfqq_slice_new(cfqq)) {
 			cfq_set_prio_slice(cfqd, cfqq);
 			cfq_clear_cfqq_slice_new(cfqq);
 		}
+		/*
+		 * If there are no requests waiting in this queue, and
+		 * there are other queues ready to issue requests, AND
+		 * those other queues are issuing requests within our
+		 * mean seek distance, give them a chance to run instead
+		 * of idling.
+		 */
 		if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
 			cfq_slice_expired(cfqd, 1);
-		else if (sync && !rq_noidle(rq) &&
-			 RB_EMPTY_ROOT(&cfqq->sort_list)) {
+		else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) &&
+			 sync && !rq_noidle(rq))
 			cfq_arm_slice_timer(cfqd);
-		}
 	}
 
 	if (!cfqd->rq_in_driver)
@@ -2062,7 +2253,7 @@
 	if (!cic)
 		return ELV_MQUEUE_MAY;
 
-	cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC);
+	cfqq = cic_to_cfqq(cic, rw_is_sync(rw));
 	if (cfqq) {
 		cfq_init_prio_data(cfqq, cic->ioc);
 		cfq_prio_boost(cfqq);
@@ -2152,11 +2343,10 @@
 	struct cfq_data *cfqd =
 		container_of(work, struct cfq_data, unplug_work);
 	struct request_queue *q = cfqd->queue;
-	unsigned long flags;
 
-	spin_lock_irqsave(q->queue_lock, flags);
+	spin_lock_irq(q->queue_lock);
 	blk_start_queueing(q);
-	spin_unlock_irqrestore(q->queue_lock, flags);
+	spin_unlock_irq(q->queue_lock);
 }
 
 /*
@@ -2263,12 +2453,22 @@
 static void *cfq_init_queue(struct request_queue *q)
 {
 	struct cfq_data *cfqd;
+	int i;
 
 	cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
 	if (!cfqd)
 		return NULL;
 
 	cfqd->service_tree = CFQ_RB_ROOT;
+
+	/*
+	 * Not strictly needed (since RB_ROOT just clears the node and we
+	 * zeroed cfqd on alloc), but better be safe in case someone decides
+	 * to add magic to the rb code
+	 */
+	for (i = 0; i < CFQ_PRIO_LISTS; i++)
+		cfqd->prio_trees[i] = RB_ROOT;
+
 	INIT_LIST_HEAD(&cfqd->cic_list);
 
 	cfqd->queue = q;
diff --git a/block/elevator.c b/block/elevator.c
index fb81bcc..7073a90 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -590,7 +590,7 @@
 /*
  * Call with queue lock held, interrupts disabled
  */
-void elv_quisce_start(struct request_queue *q)
+void elv_quiesce_start(struct request_queue *q)
 {
 	queue_flag_set(QUEUE_FLAG_ELVSWITCH, q);
 
@@ -607,7 +607,7 @@
 	}
 }
 
-void elv_quisce_end(struct request_queue *q)
+void elv_quiesce_end(struct request_queue *q)
 {
 	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
 }
@@ -1126,7 +1126,7 @@
 	 * Turn on BYPASS and drain all requests w/ elevator private data
 	 */
 	spin_lock_irq(q->queue_lock);
-	elv_quisce_start(q);
+	elv_quiesce_start(q);
 
 	/*
 	 * Remember old elevator.
@@ -1150,7 +1150,7 @@
 	 */
 	elevator_exit(old_elevator);
 	spin_lock_irq(q->queue_lock);
-	elv_quisce_end(q);
+	elv_quiesce_end(q);
 	spin_unlock_irq(q->queue_lock);
 
 	blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
diff --git a/block/genhd.c b/block/genhd.c
index a9ec910..1a4916e 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -98,7 +98,7 @@
 
 	if (flags & DISK_PITER_REVERSE)
 		piter->idx = ptbl->len - 1;
-	else if (flags & DISK_PITER_INCL_PART0)
+	else if (flags & (DISK_PITER_INCL_PART0 | DISK_PITER_INCL_EMPTY_PART0))
 		piter->idx = 0;
 	else
 		piter->idx = 1;
@@ -134,7 +134,8 @@
 	/* determine iteration parameters */
 	if (piter->flags & DISK_PITER_REVERSE) {
 		inc = -1;
-		if (piter->flags & DISK_PITER_INCL_PART0)
+		if (piter->flags & (DISK_PITER_INCL_PART0 |
+				    DISK_PITER_INCL_EMPTY_PART0))
 			end = -1;
 		else
 			end = 0;
@@ -150,7 +151,10 @@
 		part = rcu_dereference(ptbl->part[piter->idx]);
 		if (!part)
 			continue;
-		if (!(piter->flags & DISK_PITER_INCL_EMPTY) && !part->nr_sects)
+		if (!part->nr_sects &&
+		    !(piter->flags & DISK_PITER_INCL_EMPTY) &&
+		    !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 &&
+		      piter->idx == 0))
 			continue;
 
 		get_device(part_to_dev(part));
@@ -1011,7 +1015,7 @@
 				"\n\n");
 	*/
  
-	disk_part_iter_init(&piter, gp, DISK_PITER_INCL_PART0);
+	disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0);
 	while ((hd = disk_part_iter_next(&piter))) {
 		cpu = part_stat_lock();
 		part_round_stats(cpu, hd);
diff --git a/block/ioctl.c b/block/ioctl.c
index 0f22e62..ad474d4 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -146,8 +146,6 @@
 		struct bio *bio;
 
 		bio = bio_alloc(GFP_KERNEL, 0);
-		if (!bio)
-			return -ENOMEM;
 
 		bio->bi_end_io = blk_ioc_discard_endio;
 		bio->bi_bdev = bdev;
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 626ee27..82a0ca2 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -217,7 +217,7 @@
 static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
 				 struct bio *bio)
 {
-	int ret = 0;
+	int r, ret = 0;
 
 	/*
 	 * fill in all the output members
@@ -242,7 +242,9 @@
 			ret = -EFAULT;
 	}
 
-	blk_rq_unmap_user(bio);
+	r = blk_rq_unmap_user(bio);
+	if (!ret)
+		ret = r;
 	blk_put_request(rq);
 
 	return ret;
@@ -288,6 +290,7 @@
 
 	if (hdr->iovec_count) {
 		const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
+		size_t iov_data_len;
 		struct sg_iovec *iov;
 
 		iov = kmalloc(size, GFP_KERNEL);
@@ -302,8 +305,18 @@
 			goto out;
 		}
 
+		/* SG_IO howto says that the shorter of the two wins */
+		iov_data_len = iov_length((struct iovec *)iov,
+					  hdr->iovec_count);
+		if (hdr->dxfer_len < iov_data_len) {
+			hdr->iovec_count = iov_shorten((struct iovec *)iov,
+						       hdr->iovec_count,
+						       hdr->dxfer_len);
+			iov_data_len = hdr->dxfer_len;
+		}
+
 		ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
-					  hdr->dxfer_len, GFP_KERNEL);
+					  iov_data_len, GFP_KERNEL);
 		kfree(iov);
 	} else if (hdr->dxfer_len)
 		ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index baa5fc0..db307a3 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -211,6 +211,12 @@
 
 ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
 
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_enter_sleep_state
@@ -278,16 +284,18 @@
 		return_ACPI_STATUS(status);
 	}
 
-	/* Execute the _GTS method */
+	if (gts) {
+		/* Execute the _GTS method */
 
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = sleep_state;
+		arg_list.count = 1;
+		arg_list.pointer = &arg;
+		arg.type = ACPI_TYPE_INTEGER;
+		arg.integer.value = sleep_state;
 
-	status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		return_ACPI_STATUS(status);
+		status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
+		if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+			return_ACPI_STATUS(status);
+		}
 	}
 
 	/* Get current value of PM1A control */
@@ -513,18 +521,19 @@
 		}
 	}
 
-	/* Execute the _BFS method */
+	if (bfs) {
+		/* Execute the _BFS method */
 
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = sleep_state;
+		arg_list.count = 1;
+		arg_list.pointer = &arg;
+		arg.type = ACPI_TYPE_INTEGER;
+		arg.integer.value = sleep_state;
 
-	status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+		status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
+		if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+			ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+		}
 	}
-
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index 7737afb..ec33f27 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -90,6 +90,7 @@
 	{"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
 	{"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
 	{"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
+	{"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
 	{"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
 	{"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
 	{"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
@@ -151,7 +152,7 @@
 		ACPI_ERROR((AE_INFO,
 			    "Illegal I/O port address/length above 64K: 0x%p/%X",
 			    ACPI_CAST_PTR(void, address), byte_width));
-		return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+		return_ACPI_STATUS(AE_LIMIT);
 	}
 
 	/* Exit if requested address is not within the protected port table */
@@ -178,11 +179,12 @@
 			/* Port illegality may depend on the _OSI calls made by the BIOS */
 
 			if (acpi_gbl_osi_data >= port_info->osi_dependency) {
-				ACPI_ERROR((AE_INFO,
-					    "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
-					    ACPI_CAST_PTR(void, address),
-					    byte_width, port_info->name,
-					    port_info->start, port_info->end));
+				ACPI_DEBUG_PRINT((ACPI_DB_IO,
+						  "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
+						  ACPI_CAST_PTR(void, address),
+						  byte_width, port_info->name,
+						  port_info->start,
+						  port_info->end));
 
 				return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
 			}
@@ -206,7 +208,7 @@
  *              Value               Where value is placed
  *              Width               Number of bits
  *
- * RETURN:      Value read from port
+ * RETURN:      Status and value read from port
  *
  * DESCRIPTION: Read data from an I/O port or register. This is a front-end
  *              to acpi_os_read_port that performs validation on both the port
@@ -217,14 +219,43 @@
 acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
 {
 	acpi_status status;
+	u32 one_byte;
+	u32 i;
+
+	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
-	if (ACPI_FAILURE(status)) {
+	if (ACPI_SUCCESS(status)) {
+		status = acpi_os_read_port(address, value, width);
 		return status;
 	}
 
-	status = acpi_os_read_port(address, value, width);
-	return status;
+	if (status != AE_AML_ILLEGAL_ADDRESS) {
+		return status;
+	}
+
+	/*
+	 * There has been a protection violation within the request. Fall
+	 * back to byte granularity port I/O and ignore the failing bytes.
+	 * This provides Windows compatibility.
+	 */
+	for (i = 0, *value = 0; i < width; i += 8) {
+
+		/* Validate and read one byte */
+
+		if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+			status = acpi_os_read_port(address, &one_byte, 8);
+			if (ACPI_FAILURE(status)) {
+				return status;
+			}
+
+			*value |= (one_byte << i);
+		}
+
+		address++;
+	}
+
+	return AE_OK;
 }
 
 /******************************************************************************
@@ -235,7 +266,7 @@
  *              Value               Value to write
  *              Width               Number of bits
  *
- * RETURN:      None
+ * RETURN:      Status
  *
  * DESCRIPTION: Write data to an I/O port or register. This is a front-end
  *              to acpi_os_write_port that performs validation on both the port
@@ -246,12 +277,39 @@
 acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
 {
 	acpi_status status;
+	u32 i;
+
+	/* Validate the entire request and perform the I/O */
 
 	status = acpi_hw_validate_io_request(address, width);
-	if (ACPI_FAILURE(status)) {
+	if (ACPI_SUCCESS(status)) {
+		status = acpi_os_write_port(address, value, width);
 		return status;
 	}
 
-	status = acpi_os_write_port(address, value, width);
-	return status;
+	if (status != AE_AML_ILLEGAL_ADDRESS) {
+		return status;
+	}
+
+	/*
+	 * There has been a protection violation within the request. Fall
+	 * back to byte granularity port I/O and ignore the failing bytes.
+	 * This provides Windows compatibility.
+	 */
+	for (i = 0; i < width; i += 8) {
+
+		/* Validate and write one byte */
+
+		if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+			status =
+			    acpi_os_write_port(address, (value >> i) & 0xFF, 8);
+			if (ACPI_FAILURE(status)) {
+				return status;
+			}
+		}
+
+		address++;
+	}
+
+	return AE_OK;
 }
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index 663f692..a3c23d6 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -191,8 +191,6 @@
 	user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
 
 	for (index = 0; index < number_of_elements; index++) {
-		int source_name_index = 2;
-		int source_index_index = 3;
 
 		/*
 		 * Point user_prt past this current structure
@@ -261,27 +259,6 @@
 			return_ACPI_STATUS(AE_BAD_DATA);
 		}
 
-		/*
-		 * If BIOS erroneously reversed the _PRT source_name and source_index,
-		 * then reverse them back.
-		 */
-		if ((sub_object_list[3])->common.type !=
-		    ACPI_TYPE_INTEGER) {
-			if (acpi_gbl_enable_interpreter_slack) {
-				source_name_index = 3;
-				source_index_index = 2;
-				printk(KERN_WARNING
-				       "ACPI: Handling Garbled _PRT entry\n");
-			} else {
-				ACPI_ERROR((AE_INFO,
-					    "(PRT[%X].source_index) Need Integer, found %s",
-					    index,
-					    acpi_ut_get_object_type_name
-					    (sub_object_list[3])));
-				return_ACPI_STATUS(AE_BAD_DATA);
-			}
-		}
-
 		user_prt->pin = (u32) obj_desc->integer.value;
 
 		/*
@@ -304,7 +281,7 @@
 		 * 3) Third subobject: Dereference the PRT.source_name
 		 * The name may be unresolved (slack mode), so allow a null object
 		 */
-		obj_desc = sub_object_list[source_name_index];
+		obj_desc = sub_object_list[2];
 		if (obj_desc) {
 			switch (obj_desc->common.type) {
 			case ACPI_TYPE_LOCAL_REFERENCE:
@@ -378,7 +355,7 @@
 
 		/* 4) Fourth subobject: Dereference the PRT.source_index */
 
-		obj_desc = sub_object_list[source_index_index];
+		obj_desc = sub_object_list[3];
 		if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
 			ACPI_ERROR((AE_INFO,
 				    "(PRT[%X].SourceIndex) Need Integer, found %s",
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index d73c94b..9195deb 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -1,5 +1,5 @@
 /*
- *  acpi_button.c - ACPI Button Driver ($Revision: 30 $)
+ *  button.c - ACPI Button Driver
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -41,17 +41,13 @@
 
 #define ACPI_BUTTON_SUBCLASS_POWER	"power"
 #define ACPI_BUTTON_HID_POWER		"PNP0C0C"
-#define ACPI_BUTTON_DEVICE_NAME_POWER	"Power Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_POWERF	"Power Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_POWER	"Power Button"
 #define ACPI_BUTTON_TYPE_POWER		0x01
-#define ACPI_BUTTON_TYPE_POWERF		0x02
 
 #define ACPI_BUTTON_SUBCLASS_SLEEP	"sleep"
 #define ACPI_BUTTON_HID_SLEEP		"PNP0C0E"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEP	"Sleep Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEPF	"Sleep Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEP	"Sleep Button"
 #define ACPI_BUTTON_TYPE_SLEEP		0x03
-#define ACPI_BUTTON_TYPE_SLEEPF		0x04
 
 #define ACPI_BUTTON_SUBCLASS_LID	"lid"
 #define ACPI_BUTTON_HID_LID		"PNP0C0D"
@@ -95,7 +91,6 @@
 };
 
 struct acpi_button {
-	struct acpi_device *device;	/* Fixed button kludge */
 	unsigned int type;
 	struct input_dev *input;
 	char phys[32];			/* for input device */
@@ -126,14 +121,10 @@
 
 static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
 {
-	struct acpi_button *button = seq->private;
-
-	if (!button || !button->device)
-		return 0;
+	struct acpi_device *device = seq->private;
 
 	seq_printf(seq, "type:                    %s\n",
-		   acpi_device_name(button->device));
-
+		   acpi_device_name(device));
 	return 0;
 }
 
@@ -144,14 +135,11 @@
 
 static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
 {
-	struct acpi_button *button = seq->private;
+	struct acpi_device *device = seq->private;
 	acpi_status status;
 	unsigned long long state;
 
-	if (!button || !button->device)
-		return 0;
-
-	status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
+	status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
 	seq_printf(seq, "state:      %s\n",
 		   ACPI_FAILURE(status) ? "unsupported" :
 			(state ? "open" : "closed"));
@@ -169,24 +157,17 @@
 
 static int acpi_button_add_fs(struct acpi_device *device)
 {
+	struct acpi_button *button = acpi_driver_data(device);
 	struct proc_dir_entry *entry = NULL;
-	struct acpi_button *button;
-
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
-	button = acpi_driver_data(device);
 
 	switch (button->type) {
 	case ACPI_BUTTON_TYPE_POWER:
-	case ACPI_BUTTON_TYPE_POWERF:
 		if (!acpi_power_dir)
 			acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER,
 						    acpi_button_dir);
 		entry = acpi_power_dir;
 		break;
 	case ACPI_BUTTON_TYPE_SLEEP:
-	case ACPI_BUTTON_TYPE_SLEEPF:
 		if (!acpi_sleep_dir)
 			acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP,
 						    acpi_button_dir);
@@ -210,8 +191,7 @@
 	/* 'info' [R] */
 	entry = proc_create_data(ACPI_BUTTON_FILE_INFO,
 				 S_IRUGO, acpi_device_dir(device),
-				 &acpi_button_info_fops,
-				 acpi_driver_data(device));
+				 &acpi_button_info_fops, device);
 	if (!entry)
 		return -ENODEV;
 
@@ -219,8 +199,7 @@
 	if (button->type == ACPI_BUTTON_TYPE_LID) {
 		entry = proc_create_data(ACPI_BUTTON_FILE_STATE,
 					 S_IRUGO, acpi_device_dir(device),
-					 &acpi_button_state_fops,
-					 acpi_driver_data(device));
+					 &acpi_button_state_fops, device);
 		if (!entry)
 			return -ENODEV;
 	}
@@ -250,15 +229,16 @@
 /* --------------------------------------------------------------------------
                                 Driver Interface
    -------------------------------------------------------------------------- */
-static int acpi_lid_send_state(struct acpi_button *button)
+static int acpi_lid_send_state(struct acpi_device *device)
 {
+	struct acpi_button *button = acpi_driver_data(device);
 	unsigned long long state;
 	acpi_status status;
 
-	status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
-					&state);
+	status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
+
 	/* input layer checks if event is redundant */
 	input_report_switch(button->input, SW_LID, !state);
 	input_sync(button->input);
@@ -270,9 +250,6 @@
 	struct acpi_button *button = acpi_driver_data(device);
 	struct input_dev *input;
 
-	if (!button || !button->device)
-		return;
-
 	switch (event) {
 	case ACPI_FIXED_HARDWARE_EVENT:
 		event = ACPI_BUTTON_NOTIFY_STATUS;
@@ -280,7 +257,7 @@
 	case ACPI_BUTTON_NOTIFY_STATUS:
 		input = button->input;
 		if (button->type == ACPI_BUTTON_TYPE_LID) {
-			acpi_lid_send_state(button);
+			acpi_lid_send_state(device);
 		} else {
 			int keycode = test_bit(KEY_SLEEP, input->keybit) ?
 						KEY_SLEEP : KEY_POWER;
@@ -291,43 +268,35 @@
 			input_sync(input);
 		}
 
-		acpi_bus_generate_proc_event(button->device, event,
-					++button->pushed);
+		acpi_bus_generate_proc_event(device, event, ++button->pushed);
 		break;
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Unsupported event [0x%x]\n", event));
 		break;
 	}
-
-	return;
 }
 
 static int acpi_button_resume(struct acpi_device *device)
 {
-	struct acpi_button *button;
-	if (!device)
-		return -EINVAL;
-	button = acpi_driver_data(device);
-	if (button && button->type == ACPI_BUTTON_TYPE_LID)
-		return acpi_lid_send_state(button);
+	struct acpi_button *button = acpi_driver_data(device);
+
+	if (button->type == ACPI_BUTTON_TYPE_LID)
+		return acpi_lid_send_state(device);
 	return 0;
 }
 
 static int acpi_button_add(struct acpi_device *device)
 {
-	int error;
 	struct acpi_button *button;
 	struct input_dev *input;
-
-	if (!device)
-		return -EINVAL;
+	char *hid, *name, *class;
+	int error;
 
 	button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
 	if (!button)
 		return -ENOMEM;
 
-	button->device = device;
 	device->driver_data = button;
 
 	button->input = input = input_allocate_device();
@@ -336,40 +305,29 @@
 		goto err_free_button;
 	}
 
-	/*
-	 * Determine the button type (via hid), as fixed-feature buttons
-	 * need to be handled a bit differently than generic-space.
-	 */
-	if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
+	hid = acpi_device_hid(device);
+	name = acpi_device_name(device);
+	class = acpi_device_class(device);
+
+	if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
+	    !strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
 		button->type = ACPI_BUTTON_TYPE_POWER;
-		strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
-		button->type = ACPI_BUTTON_TYPE_POWERF;
-		strcpy(acpi_device_name(device),
-		       ACPI_BUTTON_DEVICE_NAME_POWERF);
-		sprintf(acpi_device_class(device), "%s/%s",
-			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) {
+	} else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) ||
+		   !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
 		button->type = ACPI_BUTTON_TYPE_SLEEP;
-		strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
-		button->type = ACPI_BUTTON_TYPE_SLEEPF;
-		strcpy(acpi_device_name(device),
-		       ACPI_BUTTON_DEVICE_NAME_SLEEPF);
-		sprintf(acpi_device_class(device), "%s/%s",
-			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
-	} else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) {
+	} else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
 		button->type = ACPI_BUTTON_TYPE_LID;
-		strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID);
-		sprintf(acpi_device_class(device), "%s/%s",
+		strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
+		sprintf(class, "%s/%s",
 			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 	} else {
-		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
-			    acpi_device_hid(device));
+		printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
 		error = -ENODEV;
 		goto err_free_input;
 	}
@@ -378,10 +336,9 @@
 	if (error)
 		goto err_free_input;
 
-	snprintf(button->phys, sizeof(button->phys),
-		 "%s/button/input0", acpi_device_hid(device));
+	snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
 
-	input->name = acpi_device_name(device);
+	input->name = name;
 	input->phys = button->phys;
 	input->id.bustype = BUS_HOST;
 	input->id.product = button->type;
@@ -389,13 +346,11 @@
 
 	switch (button->type) {
 	case ACPI_BUTTON_TYPE_POWER:
-	case ACPI_BUTTON_TYPE_POWERF:
 		input->evbit[0] = BIT_MASK(EV_KEY);
 		set_bit(KEY_POWER, input->keybit);
 		break;
 
 	case ACPI_BUTTON_TYPE_SLEEP:
-	case ACPI_BUTTON_TYPE_SLEEPF:
 		input->evbit[0] = BIT_MASK(EV_KEY);
 		set_bit(KEY_SLEEP, input->keybit);
 		break;
@@ -410,7 +365,7 @@
 	if (error)
 		goto err_remove_fs;
 	if (button->type == ACPI_BUTTON_TYPE_LID)
-		acpi_lid_send_state(button);
+		acpi_lid_send_state(device);
 
 	if (device->wakeup.flags.valid) {
 		/* Button's GPE is run-wake GPE */
@@ -422,9 +377,7 @@
 		device->wakeup.state.enabled = 1;
 	}
 
-	printk(KERN_INFO PREFIX "%s [%s]\n",
-	       acpi_device_name(device), acpi_device_bid(device));
-
+	printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
 	return 0;
 
  err_remove_fs:
@@ -438,17 +391,11 @@
 
 static int acpi_button_remove(struct acpi_device *device, int type)
 {
-	struct acpi_button *button;
-
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
-	button = acpi_driver_data(device);
+	struct acpi_button *button = acpi_driver_data(device);
 
 	acpi_button_remove_fs(device);
 	input_unregister_device(button->input);
 	kfree(button);
-
 	return 0;
 }
 
@@ -459,6 +406,7 @@
 	acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
 	if (!acpi_button_dir)
 		return -ENODEV;
+
 	result = acpi_bus_register_driver(&acpi_button_driver);
 	if (result < 0) {
 		remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 04e9044..391f331 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -1065,6 +1065,7 @@
 	struct acpi_ec *ec = acpi_driver_data(device);
 	/* Enable use of GPE back */
 	clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
+	set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
 	acpi_enable_gpe(NULL, ec->gpe);
 	return 0;
 }
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index d59f08e..d916bea 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -353,8 +353,10 @@
 	if (handled) {
 		acpi_irq_handled++;
 		return IRQ_HANDLED;
-	} else
+	} else {
+		acpi_irq_not_handled++;
 		return IRQ_NONE;
+	}
 }
 
 acpi_status
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6fe1214..f7ca8c5 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -581,6 +581,11 @@
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+		/* TSC could halt in idle, so notify users */
+		if (tsc_halts_in_c(cx->type))
+			mark_tsc_unstable("TSC halts in idle");;
+#endif
 		switch (cx->type) {
 		case ACPI_STATE_C1:
 			cx->valid = 1;
@@ -657,11 +662,9 @@
 
 	seq_printf(seq, "active state:            C%zd\n"
 		   "max_cstate:              C%d\n"
-		   "bus master activity:     %08x\n"
 		   "maximum allowed latency: %d usec\n",
 		   pr->power.state ? pr->power.state - pr->power.states : 0,
-		   max_cstate, (unsigned)pr->power.bm_activity,
-		   pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
+		   max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
 
 	seq_puts(seq, "states:\n");
 
@@ -871,11 +874,6 @@
 	kt2 = ktime_get_real();
 	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-	/* TSC could halt in idle, so notify users */
-	if (tsc_halts_in_c(cx->type))
-		mark_tsc_unstable("TSC halts in idle");;
-#endif
 	sleep_ticks = us_to_pm_timer_ticks(idle_time);
 
 	/* Tell the scheduler how much we idled: */
@@ -955,6 +953,7 @@
 	 */
 	acpi_state_timer_broadcast(pr, cx, 1);
 
+	kt1 = ktime_get_real();
 	/*
 	 * disable bus master
 	 * bm_check implies we need ARB_DIS
@@ -976,10 +975,7 @@
 		ACPI_FLUSH_CPU_CACHE();
 	}
 
-	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
-	kt2 = ktime_get_real();
-	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
 	/* Re-enable bus master arbitration */
 	if (pr->flags.bm_check && pr->flags.bm_control) {
@@ -988,12 +984,9 @@
 		c3_cpu_count--;
 		spin_unlock(&c3_lock);
 	}
+	kt2 = ktime_get_real();
+	idle_time =  ktime_to_us(ktime_sub(kt2, kt1));
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-	/* TSC could halt in idle, so notify users */
-	if (tsc_halts_in_c(ACPI_STATE_C3))
-		mark_tsc_unstable("TSC halts in idle");
-#endif
 	sleep_ticks = us_to_pm_timer_ticks(idle_time);
 	/* Tell the scheduler how much we idled: */
 	sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
@@ -1037,6 +1030,9 @@
 		dev->states[i].desc[0] = '\0';
 	}
 
+	if (max_cstate == 0)
+		max_cstate = 1;
+
 	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 		cx = &pr->power.states[i];
 		state = &dev->states[count];
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 779e4e5..01574a0 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -300,9 +300,9 @@
 static struct platform_suspend_ops acpi_suspend_ops = {
 	.valid = acpi_suspend_state_valid,
 	.begin = acpi_suspend_begin,
-	.prepare = acpi_pm_prepare,
+	.prepare_late = acpi_pm_prepare,
 	.enter = acpi_suspend_enter,
-	.finish = acpi_pm_finish,
+	.wake = acpi_pm_finish,
 	.end = acpi_pm_end,
 };
 
@@ -328,9 +328,9 @@
 static struct platform_suspend_ops acpi_suspend_ops_old = {
 	.valid = acpi_suspend_state_valid,
 	.begin = acpi_suspend_begin_old,
-	.prepare = acpi_pm_disable_gpes,
+	.prepare_late = acpi_pm_disable_gpes,
 	.enter = acpi_suspend_enter,
-	.finish = acpi_pm_finish,
+	.wake = acpi_pm_finish,
 	.end = acpi_pm_end,
 	.recover = acpi_pm_finish,
 };
@@ -713,6 +713,32 @@
 	acpi_enter_sleep_state(ACPI_STATE_S5);
 }
 
+/*
+ * ACPI 2.0 created the optional _GTS and _BFS,
+ * but industry adoption has been neither rapid nor broad.
+ *
+ * Linux gets into trouble when it executes poorly validated
+ * paths through the BIOS, so disable _GTS and _BFS by default,
+ * but do speak up and offer the option to enable them.
+ */
+void __init acpi_gts_bfs_check(void)
+{
+	acpi_handle dummy;
+
+	if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
+	{
+		printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
+		printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
+			"please notify linux-acpi@vger.kernel.org\n");
+	}
+	if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
+	{
+		printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
+		printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
+			"please notify linux-acpi@vger.kernel.org\n");
+	}
+}
+
 int __init acpi_sleep_init(void)
 {
 	acpi_status status;
@@ -771,5 +797,6 @@
 	 * object can also be evaluated when the system enters S5.
 	 */
 	register_reboot_notifier(&tts_notifier);
+	acpi_gts_bfs_check();
 	return 0;
 }
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index da51f05..0944dae 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -38,6 +38,7 @@
 #define ACPI_SYSTEM_DEVICE_NAME		"System"
 
 u32 acpi_irq_handled;
+u32 acpi_irq_not_handled;
 
 /*
  * Make ACPICA version work as module param
@@ -214,8 +215,9 @@
 
 #define COUNT_GPE 0
 #define COUNT_SCI 1	/* acpi_irq_handled */
-#define COUNT_ERROR 2	/* other */
-#define NUM_COUNTERS_EXTRA 3
+#define COUNT_SCI_NOT 2	/* acpi_irq_not_handled */
+#define COUNT_ERROR 3	/* other */
+#define NUM_COUNTERS_EXTRA 4
 
 struct event_counter {
 	u32 count;
@@ -317,6 +319,8 @@
 
 	all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
 		acpi_irq_handled;
+	all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
+		acpi_irq_not_handled;
 	all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
 		acpi_gpe_count;
 
@@ -363,6 +367,7 @@
 			all_counters[i].count = 0;
 		acpi_gpe_count = 0;
 		acpi_irq_handled = 0;
+		acpi_irq_not_handled = 0;
 		goto end;
 	}
 
@@ -456,6 +461,8 @@
 			sprintf(buffer, "gpe_all");
 		else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
 			sprintf(buffer, "sci");
+		else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
+			sprintf(buffer, "sci_not");
 		else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
 			sprintf(buffer, "error");
 		else
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9cd15e8..564ea14 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -909,7 +909,7 @@
 			thermal_zone_device_register("acpitz", trips, tz,
 						     &acpi_thermal_zone_ops,
 						     0, 0, 0,
-						     tz->polling_frequency);
+						     tz->polling_frequency*100);
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
 
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index cd4fb75..1705d94 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -770,10 +770,12 @@
 	 * In this case, the first two elements in _BCL packages
 	 * are also supported brightness levels that OS should take care of.
 	 */
-	for (i = 2; i < count; i++)
-		if (br->levels[i] == br->levels[0] ||
-		    br->levels[i] == br->levels[1])
+	for (i = 2; i < count; i++) {
+		if (br->levels[i] == br->levels[0])
 			level_ac_battery++;
+		if (br->levels[i] == br->levels[1])
+			level_ac_battery++;
+	}
 
 	if (level_ac_battery < 2) {
 		level_ac_battery = 2 - level_ac_battery;
@@ -807,12 +809,19 @@
 	br->flags._BCM_use_index = br->flags._BCL_use_index;
 
 	/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
-	br->curr = max_level;
+	br->curr = level_old = max_level;
+
+	if (!device->cap._BQC)
+		goto set_level;
+
 	result = acpi_video_device_lcd_get_level_current(device, &level_old);
 	if (result)
 		goto out_free_levels;
 
-	result = acpi_video_device_lcd_set_level(device, br->curr);
+	/*
+	 * Set the level to maximum and check if _BQC uses indexed value
+	 */
+	result = acpi_video_device_lcd_set_level(device, max_level);
 	if (result)
 		goto out_free_levels;
 
@@ -820,25 +829,19 @@
 	if (result)
 		goto out_free_levels;
 
-	if ((level != level_old) && !br->flags._BCM_use_index) {
-		/* Note:
-		 * This piece of code does not work correctly if the current
-		 * brightness levels is 0.
-		 * But I guess boxes that boot with such a dark screen are rare
-		 * and no more code is needed to cover this specifial case.
-		 */
+	br->flags._BQC_use_index = (level == max_level ? 0 : 1);
 
-		if (level_ac_battery != 2) {
-			/*
-			 * For now, we don't support the _BCL like this:
-			 * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16
-			 * because we may mess up the index returned by _BQC.
-			 * Plus: we have not got a box like this.
-			 */
-			ACPI_ERROR((AE_INFO, "_BCL not supported\n"));
-		}
-		br->flags._BQC_use_index = 1;
-	}
+	if (!br->flags._BQC_use_index)
+		goto set_level;
+
+	if (br->flags._BCL_reversed)
+		level_old = (br->count - 1) - level_old;
+	level_old = br->levels[level_old];
+
+set_level:
+	result = acpi_video_device_lcd_set_level(device, level_old);
+	if (result)
+		goto out_free_levels;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "found %d brightness levels\n", count - 2));
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 065507c..17c5d48 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1231,6 +1231,9 @@
 	 *
 	 * We follow the current spec and consider that 0x69/0x96
 	 * identifies a port multiplier and 0x3c/0xc3 a SEMB device.
+	 * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
+	 * SEMB signature.  This is worked around in
+	 * ata_dev_read_id().
 	 */
 	if ((tf->lbam == 0) && (tf->lbah == 0)) {
 		DPRINTK("found ATA device by sig\n");
@@ -1248,8 +1251,8 @@
 	}
 
 	if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
-		printk(KERN_INFO "ata: SEMB device ignored\n");
-		return ATA_DEV_SEMB_UNSUP; /* not yet */
+		DPRINTK("found SEMB device by sig (could be ATA device)\n");
+		return ATA_DEV_SEMB;
 	}
 
 	DPRINTK("unknown device\n");
@@ -1653,8 +1656,8 @@
 		/*
 		 *	Process compact flash extended modes
 		 */
-		int pio = id[163] & 0x7;
-		int dma = (id[163] >> 3) & 7;
+		int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
+		int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
 
 		if (pio)
 			pio_mask |= (1 << 5);
@@ -2080,6 +2083,7 @@
 	struct ata_taskfile tf;
 	unsigned int err_mask = 0;
 	const char *reason;
+	bool is_semb = class == ATA_DEV_SEMB;
 	int may_fallback = 1, tried_spinup = 0;
 	int rc;
 
@@ -2090,6 +2094,8 @@
 	ata_tf_init(dev, &tf);
 
 	switch (class) {
+	case ATA_DEV_SEMB:
+		class = ATA_DEV_ATA;	/* some hard drives report SEMB sig */
 	case ATA_DEV_ATA:
 		tf.command = ATA_CMD_ID_ATA;
 		break;
@@ -2126,6 +2132,14 @@
 			return -ENOENT;
 		}
 
+		if (is_semb) {
+			ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
+				       "device w/ SEMB sig, disabled\n");
+			/* SEMB is not supported yet */
+			*p_class = ATA_DEV_SEMB_UNSUP;
+			return 0;
+		}
+
 		if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
 			/* Device or controller might have reported
 			 * the wrong device class.  Give a shot at the
@@ -2412,7 +2426,8 @@
 	/* ATA-specific feature tests */
 	if (dev->class == ATA_DEV_ATA) {
 		if (ata_id_is_cfa(id)) {
-			if (id[162] & 1) /* CPRM may make this media unusable */
+			/* CPRM may make this media unusable */
+			if (id[ATA_ID_CFA_KEY_MGMT] & 1)
 				ata_dev_printk(dev, KERN_WARNING,
 					       "supports DRM functions and may "
 					       "not be fully accessable.\n");
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b9747fa..2733b0c 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -647,23 +647,45 @@
 	return rc;
 }
 
+static int ata_ioc32(struct ata_port *ap)
+{
+	if (ap->flags & ATA_FLAG_PIO_DMA)
+		return 1;
+	if (ap->pflags & ATA_PFLAG_PIO32)
+		return 1;
+	return 0;
+}
+
 int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
 		     int cmd, void __user *arg)
 {
 	int val = -EINVAL, rc = -EINVAL;
+	unsigned long flags;
 
 	switch (cmd) {
 	case ATA_IOC_GET_IO32:
-		val = 0;
+		spin_lock_irqsave(ap->lock, flags);
+		val = ata_ioc32(ap);
+		spin_unlock_irqrestore(ap->lock, flags);
 		if (copy_to_user(arg, &val, 1))
 			return -EFAULT;
 		return 0;
 
 	case ATA_IOC_SET_IO32:
 		val = (unsigned long) arg;
-		if (val != 0)
-			return -EINVAL;
-		return 0;
+		rc = 0;
+		spin_lock_irqsave(ap->lock, flags);
+		if (ap->pflags & ATA_PFLAG_PIO32CHANGE) {
+			if (val)
+				ap->pflags |= ATA_PFLAG_PIO32;
+			else
+				ap->pflags &= ~ATA_PFLAG_PIO32;
+		} else {
+			if (val != ata_ioc32(ap))
+				rc = -EINVAL;
+		}
+		spin_unlock_irqrestore(ap->lock, flags);
+		return rc;
 
 	case HDIO_GET_IDENTITY:
 		return ata_get_identity(ap, scsidev, arg);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 8332e97..bb18415 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -87,6 +87,7 @@
 	.inherits		= &ata_bmdma_port_ops,
 
 	.sff_data_xfer		= ata_sff_data_xfer32,
+	.port_start		= ata_sff_port_start32,
 };
 EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
 
@@ -769,6 +770,9 @@
 	void __iomem *data_addr = ap->ioaddr.data_addr;
 	unsigned int words = buflen >> 2;
 	int slop = buflen & 3;
+	
+	if (!(ap->pflags & ATA_PFLAG_PIO32))
+		return ata_sff_data_xfer(dev, buf, buflen, rw);
 
 	/* Transfer multiple of 4 bytes */
 	if (rw == READ)
@@ -2402,6 +2406,29 @@
 EXPORT_SYMBOL_GPL(ata_sff_port_start);
 
 /**
+ *	ata_sff_port_start32 - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Called just after data structures for each port are
+ *	initialized.  Allocates space for PRD table if the device
+ *	is DMA capable SFF.
+ *
+ *	May be used as the port_start() entry in ata_port_operations for
+ *	devices that are capable of 32bit PIO.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+int ata_sff_port_start32(struct ata_port *ap)
+{
+	ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+	if (ap->ioaddr.bmdma_addr)
+		return ata_port_start(ap);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_start32);
+
+/**
  *	ata_sff_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
  *
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 81ab5700..122c786 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -8,7 +8,7 @@
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
- * Portions Copyright (C) 2005-2007	MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009	MontaVista Software, Inc.
  *
  * TODO
  *	Look into engine reset on timeout errors. Should not be	required.
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.11"
+#define DRV_VERSION	"0.6.12"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -445,23 +445,6 @@
 }
 
 /**
- *	hpt370_bmdma_start		-	DMA engine begin
- *	@qc: ATA command
- *
- *	The 370 and 370A want us to reset the DMA engine each time we
- *	use it. The 372 and later are fine.
- */
-
-static void hpt370_bmdma_start(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
-	udelay(10);
-	ata_bmdma_start(qc);
-}
-
-/**
  *	hpt370_bmdma_end		-	DMA engine stop
  *	@qc: ATA command
  *
@@ -598,7 +581,6 @@
 static struct ata_port_operations hpt370_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
-	.bmdma_start 	= hpt370_bmdma_start,
 	.bmdma_stop	= hpt370_bmdma_stop,
 
 	.mode_filter	= hpt370_filter,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 3f830f0..f72c6c5 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -108,6 +108,7 @@
 	struct ata_port_operations *ops;
 	unsigned int pio_mask;
 	unsigned int flags;
+	unsigned int pflags;
 	int (*setup)(struct platform_device *, struct legacy_probe *probe,
 		struct legacy_data *data);
 };
@@ -284,9 +285,11 @@
 			unsigned char *buf, unsigned int buflen, int rw)
 {
 	int slop = buflen & 3;
+	struct ata_port *ap = dev->link->ap;
+
 	/* 32bit I/O capable *and* we need to write a whole number of dwords */
-	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
-		struct ata_port *ap = dev->link->ap;
+	if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
+					&& (ap->pflags & ATA_PFLAG_PIO32)) {
 		unsigned long flags;
 
 		local_irq_save(flags);
@@ -736,7 +739,8 @@
 	struct ata_port *ap = adev->link->ap;
 	int slop = buflen & 3;
 
-	if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
+	if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)
+					&& (ap->pflags & ATA_PFLAG_PIO32)) {
 		if (rw == WRITE)
 			iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
 		else
@@ -858,27 +862,30 @@
 
 static struct legacy_controller controllers[] = {
 	{"BIOS",	&legacy_port_ops, 	0x1F,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,	0,			NULL },
 	{"Snooping", 	&simple_port_ops, 	0x1F,
-						0	       ,	NULL },
+			0,			0,			NULL },
 	{"PDC20230",	&pdc20230_port_ops,	0x7,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,
+			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,	NULL },
 	{"HT6560A",	&ht6560a_port_ops,	0x07,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,	0,			NULL },
 	{"HT6560B",	&ht6560b_port_ops,	0x1F,
-						ATA_FLAG_NO_IORDY,	NULL },
+			ATA_FLAG_NO_IORDY,	0,			NULL },
 	{"OPTI82C611A",	&opti82c611a_port_ops,	0x0F,
-						0	       ,	NULL },
+			0,			0,			NULL },
 	{"OPTI82C46X",	&opti82c46x_port_ops,	0x0F,
-						0	       ,	NULL },
+			0,			0,			NULL },
 	{"QDI6500",	&qdi6500_port_ops,	0x07,
-					ATA_FLAG_NO_IORDY,	qdi_port },
+			ATA_FLAG_NO_IORDY,
+			ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,    qdi_port },
 	{"QDI6580",	&qdi6580_port_ops,	0x1F,
-					0	       ,	qdi_port },
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
 	{"QDI6580DP",	&qdi6580dp_port_ops,	0x1F,
-					0	       ,	qdi_port },
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
 	{"W83759A",	&winbond_port_ops,	0x1F,
-					0	       ,	winbond_port }
+			0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
+								winbond_port }
 };
 
 /**
@@ -1008,6 +1015,7 @@
 	ap->ops = ops;
 	ap->pio_mask = pio_modes;
 	ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+	ap->pflags |= controller->pflags;
 	ap->ioaddr.cmd_addr = io_addr;
 	ap->ioaddr.altstatus_addr = ctrl_addr;
 	ap->ioaddr.ctl_addr = ctrl_addr;
@@ -1032,6 +1040,7 @@
 			return 0;
 		}
 	}
+	ata_host_detach(host);
 fail:
 	platform_device_unregister(pdev);
 	return ret;
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 0fb6b1b..dd53a66 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.3"
+#define DRV_VERSION "0.1.5"
 
 
 /**
@@ -86,6 +86,7 @@
 	.sff_dev_select = ninja32_dev_select,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= ninja32_set_piomode,
+	.sff_data_xfer	= ata_sff_data_xfer32
 };
 
 static void ninja32_program(void __iomem *base)
@@ -144,6 +145,7 @@
 	ap->ioaddr.altstatus_addr = base + 0x1E;
 	ap->ioaddr.bmdma_addr = base;
 	ata_sff_std_ports(&ap->ioaddr);
+	ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
 
 	ninja32_program(base);
 	/* FIXME: Should we disable them at remove ? */
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index b08e6e0..45657ca 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -62,7 +62,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
 
 /*
  *	The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
@@ -136,6 +136,9 @@
 	{ NULL }
 };
 
+struct via_port {
+	u8 cached_device;
+};
 
 /*
  *	Cable special cases
@@ -346,14 +349,70 @@
  */
 static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
-	struct ata_taskfile tmp_tf;
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	struct via_port *vp = ap->private_data;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+	int newctl = 0;
 
-	if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
-		tmp_tf = *tf;
-		tmp_tf.flags |= ATA_TFLAG_DEVICE;
-		tf = &tmp_tf;
+	if (tf->ctl != ap->last_ctl) {
+		iowrite8(tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+		newctl = 1;
 	}
-	ata_sff_tf_load(ap, tf);
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		iowrite8(tf->device, ioaddr->device_addr);
+		vp->cached_device = tf->device;
+	} else if (newctl)
+		iowrite8(vp->cached_device, ioaddr->device_addr);
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		WARN_ON_ONCE(!ioaddr->ctl_addr);
+		iowrite8(tf->hob_feature, ioaddr->feature_addr);
+		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->hob_feature,
+			tf->hob_nsect,
+			tf->hob_lbal,
+			tf->hob_lbam,
+			tf->hob_lbah);
+	}
+
+	if (is_addr) {
+		iowrite8(tf->feature, ioaddr->feature_addr);
+		iowrite8(tf->nsect, ioaddr->nsect_addr);
+		iowrite8(tf->lbal, ioaddr->lbal_addr);
+		iowrite8(tf->lbam, ioaddr->lbam_addr);
+		iowrite8(tf->lbah, ioaddr->lbah_addr);
+		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
+	}
+
+	ata_wait_idle(ap);
+}
+
+static int via_port_start(struct ata_port *ap)
+{
+	struct via_port *vp;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	int ret = ata_sff_port_start(ap);
+	if (ret < 0)
+		return ret;
+
+	vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL);
+	if (vp == NULL)
+		return -ENOMEM;
+	ap->private_data = vp;
+	return 0;
 }
 
 static struct scsi_host_template via_sht = {
@@ -367,6 +426,7 @@
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
 	.sff_tf_load	= via_tf_load,
+	.port_start	= via_port_start,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 37ae5dc..870dcfd 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1881,6 +1881,39 @@
 	return status;
 }
 
+static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc)
+{
+	struct ata_taskfile *tf = &qc->tf;
+	/*
+	 * Workaround for 88SX60x1 FEr SATA#24.
+	 *
+	 * Chip may corrupt WRITEs if multi_count >= 4kB.
+	 * Note that READs are unaffected.
+	 *
+	 * It's not clear if this errata really means "4K bytes",
+	 * or if it always happens for multi_count > 7
+	 * regardless of device sector_size.
+	 *
+	 * So, for safety, any write with multi_count > 7
+	 * gets converted here into a regular PIO write instead:
+	 */
+	if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) {
+		if (qc->dev->multi_count > 7) {
+			switch (tf->command) {
+			case ATA_CMD_WRITE_MULTI:
+				tf->command = ATA_CMD_PIO_WRITE;
+				break;
+			case ATA_CMD_WRITE_MULTI_FUA_EXT:
+				tf->flags &= ~ATA_TFLAG_FUA; /* ugh */
+				/* fall through */
+			case ATA_CMD_WRITE_MULTI_EXT:
+				tf->command = ATA_CMD_PIO_WRITE_EXT;
+				break;
+			}
+		}
+	}
+}
+
 /**
  *      mv_qc_prep - Host specific command preparation.
  *      @qc: queued command to prepare
@@ -1898,17 +1931,24 @@
 	struct ata_port *ap = qc->ap;
 	struct mv_port_priv *pp = ap->private_data;
 	__le16 *cw;
-	struct ata_taskfile *tf;
+	struct ata_taskfile *tf = &qc->tf;
 	u16 flags = 0;
 	unsigned in_index;
 
-	if ((qc->tf.protocol != ATA_PROT_DMA) &&
-	    (qc->tf.protocol != ATA_PROT_NCQ))
+	switch (tf->protocol) {
+	case ATA_PROT_DMA:
+	case ATA_PROT_NCQ:
+		break;	/* continue below */
+	case ATA_PROT_PIO:
+		mv_rw_multi_errata_sata24(qc);
 		return;
+	default:
+		return;
+	}
 
 	/* Fill in command request block
 	 */
-	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+	if (!(tf->flags & ATA_TFLAG_WRITE))
 		flags |= CRQB_FLAG_READ;
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
@@ -1924,7 +1964,6 @@
 	pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
 
 	cw = &pp->crqb[in_index].ata_cmd[0];
-	tf = &qc->tf;
 
 	/* Sadly, the CRQB cannot accomodate all registers--there are
 	 * only 11 bytes...so we must pick and choose required
@@ -1990,16 +2029,16 @@
 	struct ata_port *ap = qc->ap;
 	struct mv_port_priv *pp = ap->private_data;
 	struct mv_crqb_iie *crqb;
-	struct ata_taskfile *tf;
+	struct ata_taskfile *tf = &qc->tf;
 	unsigned in_index;
 	u32 flags = 0;
 
-	if ((qc->tf.protocol != ATA_PROT_DMA) &&
-	    (qc->tf.protocol != ATA_PROT_NCQ))
+	if ((tf->protocol != ATA_PROT_DMA) &&
+	    (tf->protocol != ATA_PROT_NCQ))
 		return;
 
 	/* Fill in Gen IIE command request block */
-	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+	if (!(tf->flags & ATA_TFLAG_WRITE))
 		flags |= CRQB_FLAG_READ;
 
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
@@ -2015,7 +2054,6 @@
 	crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
 	crqb->flags = cpu_to_le32(flags);
 
-	tf = &qc->tf;
 	crqb->ata_cmd[0] = cpu_to_le32(
 			(tf->command << 16) |
 			(tf->feature << 24)
diff --git a/drivers/base/base.h b/drivers/base/base.h
index ddc9749..b528145 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -115,7 +115,7 @@
 static inline int driver_match_device(struct device_driver *drv,
 				      struct device *dev)
 {
-	return drv->bus->match && drv->bus->match(dev, drv);
+	return drv->bus->match ? drv->bus->match(dev, drv) : 1;
 }
 
 extern void sysdev_shutdown(void);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index e73c92d..4aa527b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -891,7 +891,8 @@
 		set_dev_node(dev, dev_to_node(parent));
 
 	/* first, register with generic layer. */
-	error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
+	/* we require the name to be set before, and pass NULL */
+	error = kobject_add(&dev->kobj, dev->kobj.parent, NULL);
 	if (error)
 		goto Error;
 
@@ -1142,6 +1143,9 @@
 	struct device *child;
 	int error = 0;
 
+	if (!parent->p)
+		return 0;
+
 	klist_iter_init(&parent->p->klist_children, &i);
 	while ((child = next_device(&i)) && !error)
 		error = fn(child, data);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index f17c326..742cbe6 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -179,6 +179,7 @@
 	wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
 	async_synchronize_full();
 }
+EXPORT_SYMBOL_GPL(wait_for_device_probe);
 
 /**
  * driver_probe_device - attempt to bind device & driver together
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index d2198f6..b5b6c97 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -990,6 +990,8 @@
 {
 	int error;
 
+	early_platform_cleanup();
+
 	error = device_register(&platform_bus);
 	if (error)
 		return error;
@@ -1020,3 +1022,240 @@
 }
 EXPORT_SYMBOL_GPL(dma_get_required_mask);
 #endif
+
+static __initdata LIST_HEAD(early_platform_driver_list);
+static __initdata LIST_HEAD(early_platform_device_list);
+
+/**
+ * early_platform_driver_register
+ * @edrv: early_platform driver structure
+ * @buf: string passed from early_param()
+ */
+int __init early_platform_driver_register(struct early_platform_driver *epdrv,
+					  char *buf)
+{
+	unsigned long index;
+	int n;
+
+	/* Simply add the driver to the end of the global list.
+	 * Drivers will by default be put on the list in compiled-in order.
+	 */
+	if (!epdrv->list.next) {
+		INIT_LIST_HEAD(&epdrv->list);
+		list_add_tail(&epdrv->list, &early_platform_driver_list);
+	}
+
+	/* If the user has specified device then make sure the driver
+	 * gets prioritized. The driver of the last device specified on
+	 * command line will be put first on the list.
+	 */
+	n = strlen(epdrv->pdrv->driver.name);
+	if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
+		list_move(&epdrv->list, &early_platform_driver_list);
+
+		if (!strcmp(buf, epdrv->pdrv->driver.name))
+			epdrv->requested_id = -1;
+		else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10,
+							 &index) == 0)
+			epdrv->requested_id = index;
+		else
+			epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
+	}
+
+	return 0;
+}
+
+/**
+ * early_platform_add_devices - add a numbers of early platform devices
+ * @devs: array of early platform devices to add
+ * @num: number of early platform devices in array
+ */
+void __init early_platform_add_devices(struct platform_device **devs, int num)
+{
+	struct device *dev;
+	int i;
+
+	/* simply add the devices to list */
+	for (i = 0; i < num; i++) {
+		dev = &devs[i]->dev;
+
+		if (!dev->devres_head.next) {
+			INIT_LIST_HEAD(&dev->devres_head);
+			list_add_tail(&dev->devres_head,
+				      &early_platform_device_list);
+		}
+	}
+}
+
+/**
+ * early_platform_driver_register_all
+ * @class_str: string to identify early platform driver class
+ */
+void __init early_platform_driver_register_all(char *class_str)
+{
+	/* The "class_str" parameter may or may not be present on the kernel
+	 * command line. If it is present then there may be more than one
+	 * matching parameter.
+	 *
+	 * Since we register our early platform drivers using early_param()
+	 * we need to make sure that they also get registered in the case
+	 * when the parameter is missing from the kernel command line.
+	 *
+	 * We use parse_early_options() to make sure the early_param() gets
+	 * called at least once. The early_param() may be called more than
+	 * once since the name of the preferred device may be specified on
+	 * the kernel command line. early_platform_driver_register() handles
+	 * this case for us.
+	 */
+	parse_early_options(class_str);
+}
+
+/**
+ * early_platform_match
+ * @edrv: early platform driver structure
+ * @id: id to match against
+ */
+static  __init struct platform_device *
+early_platform_match(struct early_platform_driver *epdrv, int id)
+{
+	struct platform_device *pd;
+
+	list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+		if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+			if (pd->id == id)
+				return pd;
+
+	return NULL;
+}
+
+/**
+ * early_platform_left
+ * @edrv: early platform driver structure
+ * @id: return true if id or above exists
+ */
+static  __init int early_platform_left(struct early_platform_driver *epdrv,
+				       int id)
+{
+	struct platform_device *pd;
+
+	list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+		if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+			if (pd->id >= id)
+				return 1;
+
+	return 0;
+}
+
+/**
+ * early_platform_driver_probe_id
+ * @class_str: string to identify early platform driver class
+ * @id: id to match against
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ */
+static int __init early_platform_driver_probe_id(char *class_str,
+						 int id,
+						 int nr_probe)
+{
+	struct early_platform_driver *epdrv;
+	struct platform_device *match;
+	int match_id;
+	int n = 0;
+	int left = 0;
+
+	list_for_each_entry(epdrv, &early_platform_driver_list, list) {
+		/* only use drivers matching our class_str */
+		if (strcmp(class_str, epdrv->class_str))
+			continue;
+
+		if (id == -2) {
+			match_id = epdrv->requested_id;
+			left = 1;
+
+		} else {
+			match_id = id;
+			left += early_platform_left(epdrv, id);
+
+			/* skip requested id */
+			switch (epdrv->requested_id) {
+			case EARLY_PLATFORM_ID_ERROR:
+			case EARLY_PLATFORM_ID_UNSET:
+				break;
+			default:
+				if (epdrv->requested_id == id)
+					match_id = EARLY_PLATFORM_ID_UNSET;
+			}
+		}
+
+		switch (match_id) {
+		case EARLY_PLATFORM_ID_ERROR:
+			pr_warning("%s: unable to parse %s parameter\n",
+				   class_str, epdrv->pdrv->driver.name);
+			/* fall-through */
+		case EARLY_PLATFORM_ID_UNSET:
+			match = NULL;
+			break;
+		default:
+			match = early_platform_match(epdrv, match_id);
+		}
+
+		if (match) {
+			if (epdrv->pdrv->probe(match))
+				pr_warning("%s: unable to probe %s early.\n",
+					   class_str, match->name);
+			else
+				n++;
+		}
+
+		if (n >= nr_probe)
+			break;
+	}
+
+	if (left)
+		return n;
+	else
+		return -ENODEV;
+}
+
+/**
+ * early_platform_driver_probe
+ * @class_str: string to identify early platform driver class
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ * @user_only: only probe user specified early platform devices
+ */
+int __init early_platform_driver_probe(char *class_str,
+				       int nr_probe,
+				       int user_only)
+{
+	int k, n, i;
+
+	n = 0;
+	for (i = -2; n < nr_probe; i++) {
+		k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
+
+		if (k < 0)
+			break;
+
+		n += k;
+
+		if (user_only)
+			break;
+	}
+
+	return n;
+}
+
+/**
+ * early_platform_cleanup - clean up early platform code
+ */
+void __init early_platform_cleanup(void)
+{
+	struct platform_device *pd, *pd2;
+
+	/* clean up the devres list used to chain devices */
+	list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
+				 dev.devres_head) {
+		list_del(&pd->dev.devres_head);
+		memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
+	}
+}
+
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index bdd4f5f..5f7e64b 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -275,8 +275,10 @@
 	if (rw == READ) {
 		copy_from_brd(mem + off, brd, sector, len);
 		flush_dcache_page(page);
-	} else
+	} else {
+		flush_dcache_page(page);
 		copy_to_brd(brd, mem + off, sector, len);
+	}
 	kunmap_atomic(mem, KM_USER0);
 
 out:
@@ -436,6 +438,7 @@
 	if (!brd->brd_queue)
 		goto out_free_dev;
 	blk_queue_make_request(brd->brd_queue, brd_make_request);
+	blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
 	blk_queue_max_sectors(brd->brd_queue, 1024);
 	blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
 
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 69b7f8e..689cd27 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1025,6 +1025,7 @@
 {
 	struct urb *urb = &sc->work_urb;
 	struct bulk_cs_wrap *bcs;
+	int endp;
 	int len;
 	int rc;
 
@@ -1033,6 +1034,10 @@
 		return;
 	}
 
+	endp = usb_pipeendpoint(sc->last_pipe);
+	if (usb_pipein(sc->last_pipe))
+		endp |= USB_DIR_IN;
+
 	if (cmd->state == UB_CMDST_CLEAR) {
 		if (urb->status == -EPIPE) {
 			/*
@@ -1048,9 +1053,7 @@
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_sense(sc, cmd);
 
@@ -1065,9 +1068,7 @@
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_stat(sc, cmd);
 
@@ -1082,9 +1083,7 @@
 		 * We ignore the result for the halt clear.
 		 */
 
-		/* reset the endpoint toggle */
-		usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
-			usb_pipeout(sc->last_pipe), 0);
+		usb_reset_endpoint(sc->dev, endp);
 
 		ub_state_stat_counted(sc, cmd);
 
@@ -2119,8 +2118,7 @@
 	del_timer_sync(&timer);
 	usb_kill_urb(&sc->work_urb);
 
-	/* reset the endpoint toggle */
-	usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
+	usb_reset_endpoint(sc->dev, endp);
 
 	return 0;
 }
diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 9744d59..858c34d 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -906,6 +906,7 @@
 		goto failed_alloc;
 
 	blk_queue_make_request(card->queue, mm_make_request);
+	card->queue->queue_lock = &card->lock;
 	card->queue->queuedata = card;
 	card->queue->unplug_fn = mm_unplug_device;
 
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index 10d6cbd..2224b76 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -1226,7 +1226,7 @@
 	int i, ret = -ENOMEM;
 
 	for (i = 0; i < num_pages; i++) {
-		page = alloc_page(GFP_KERNEL | GFP_DMA32);
+		page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
 		/* agp_free_memory() needs gart address */
 		if (page == NULL)
 			goto out;
@@ -1257,7 +1257,7 @@
 {
 	struct page * page;
 
-	page = alloc_page(GFP_KERNEL | GFP_DMA32);
+	page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
 	if (page == NULL)
 		return NULL;
 
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 50dfa3b..340ba4f 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -72,7 +72,7 @@
 #ifdef CONFIG_IA64
 static void __iomem *hpet_mctr;
 
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
 {
 	return (cycle_t)read_counter((void __iomem *)hpet_mctr);
 }
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index d0e563e..86e83f8 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -37,9 +37,9 @@
 {
 	int len;
 
-	/* We never get spurious callbacks. */
+	/* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
 	if (!vq->vq_ops->get_buf(vq, &len))
-		BUG();
+		return;
 
 	data_left = len / sizeof(random_data[0]);
 	complete(&have_data);
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index e93fc8d..aa83a08 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -285,6 +285,11 @@
 	/* Events that were received with the proper format. */
 	IPMI_STAT_events,
 
+	/* Retransmissions on IPMB that failed. */
+	IPMI_STAT_dropped_rexmit_ipmb_commands,
+
+	/* Retransmissions on LAN that failed. */
+	IPMI_STAT_dropped_rexmit_lan_commands,
 
 	/* This *must* remain last, add new values above this. */
 	IPMI_NUM_STATS
@@ -445,6 +450,20 @@
 #define ipmi_get_stat(intf, stat) \
 	((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat]))
 
+static int is_lan_addr(struct ipmi_addr *addr)
+{
+	return addr->addr_type == IPMI_LAN_ADDR_TYPE;
+}
+
+static int is_ipmb_addr(struct ipmi_addr *addr)
+{
+	return addr->addr_type == IPMI_IPMB_ADDR_TYPE;
+}
+
+static int is_ipmb_bcast_addr(struct ipmi_addr *addr)
+{
+	return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE;
+}
 
 static void free_recv_msg_list(struct list_head *q)
 {
@@ -601,8 +620,7 @@
 		return (smi_addr1->lun == smi_addr2->lun);
 	}
 
-	if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
-	    || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+	if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) {
 		struct ipmi_ipmb_addr *ipmb_addr1
 		    = (struct ipmi_ipmb_addr *) addr1;
 		struct ipmi_ipmb_addr *ipmb_addr2
@@ -612,7 +630,7 @@
 			&& (ipmb_addr1->lun == ipmb_addr2->lun));
 	}
 
-	if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) {
+	if (is_lan_addr(addr1)) {
 		struct ipmi_lan_addr *lan_addr1
 			= (struct ipmi_lan_addr *) addr1;
 		struct ipmi_lan_addr *lan_addr2
@@ -644,14 +662,13 @@
 	    || (addr->channel < 0))
 		return -EINVAL;
 
-	if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
-	    || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+	if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
 		if (len < sizeof(struct ipmi_ipmb_addr))
 			return -EINVAL;
 		return 0;
 	}
 
-	if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+	if (is_lan_addr(addr)) {
 		if (len < sizeof(struct ipmi_lan_addr))
 			return -EINVAL;
 		return 0;
@@ -1503,8 +1520,7 @@
 			memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
 		smi_msg->data_size = msg->data_len + 2;
 		ipmi_inc_stat(intf, sent_local_commands);
-	} else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
-		   || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+	} else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
 		struct ipmi_ipmb_addr *ipmb_addr;
 		unsigned char         ipmb_seq;
 		long                  seqid;
@@ -1583,8 +1599,6 @@
 
 			spin_lock_irqsave(&(intf->seq_lock), flags);
 
-			ipmi_inc_stat(intf, sent_ipmb_commands);
-
 			/*
 			 * Create a sequence number with a 1 second
 			 * timeout and 4 retries.
@@ -1606,6 +1620,8 @@
 				goto out_err;
 			}
 
+			ipmi_inc_stat(intf, sent_ipmb_commands);
+
 			/*
 			 * Store the sequence number in the message,
 			 * so that when the send message response
@@ -1635,7 +1651,7 @@
 			 */
 			spin_unlock_irqrestore(&(intf->seq_lock), flags);
 		}
-	} else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+	} else if (is_lan_addr(addr)) {
 		struct ipmi_lan_addr  *lan_addr;
 		unsigned char         ipmb_seq;
 		long                  seqid;
@@ -1696,8 +1712,6 @@
 
 			spin_lock_irqsave(&(intf->seq_lock), flags);
 
-			ipmi_inc_stat(intf, sent_lan_commands);
-
 			/*
 			 * Create a sequence number with a 1 second
 			 * timeout and 4 retries.
@@ -1719,6 +1733,8 @@
 				goto out_err;
 			}
 
+			ipmi_inc_stat(intf, sent_lan_commands);
+
 			/*
 			 * Store the sequence number in the message,
 			 * so that when the send message response
@@ -1937,6 +1953,10 @@
 		       ipmi_get_stat(intf, invalid_events));
 	out += sprintf(out, "events:                      %u\n",
 		       ipmi_get_stat(intf, events));
+	out += sprintf(out, "failed rexmit LAN msgs:      %u\n",
+		       ipmi_get_stat(intf, dropped_rexmit_lan_commands));
+	out += sprintf(out, "failed rexmit IPMB msgs:     %u\n",
+		       ipmi_get_stat(intf, dropped_rexmit_ipmb_commands));
 
 	return (out - ((char *) page));
 }
@@ -3264,6 +3284,114 @@
 	return rv;
 }
 
+/*
+ * This routine will handle "Get Message" command responses with
+ * channels that use an OEM Medium. The message format belongs to
+ * the OEM.  See IPMI 2.0 specification, Chapter 6 and
+ * Chapter 22, sections 22.6 and 22.24 for more details.
+ */
+static int handle_oem_get_msg_cmd(ipmi_smi_t          intf,
+				  struct ipmi_smi_msg *msg)
+{
+	struct cmd_rcvr       *rcvr;
+	int                   rv = 0;
+	unsigned char         netfn;
+	unsigned char         cmd;
+	unsigned char         chan;
+	ipmi_user_t           user = NULL;
+	struct ipmi_system_interface_addr *smi_addr;
+	struct ipmi_recv_msg  *recv_msg;
+
+	/*
+	 * We expect the OEM SW to perform error checking
+	 * so we just do some basic sanity checks
+	 */
+	if (msg->rsp_size < 4) {
+		/* Message not big enough, just ignore it. */
+		ipmi_inc_stat(intf, invalid_commands);
+		return 0;
+	}
+
+	if (msg->rsp[2] != 0) {
+		/* An error getting the response, just ignore it. */
+		return 0;
+	}
+
+	/*
+	 * This is an OEM Message so the OEM needs to know how
+	 * handle the message. We do no interpretation.
+	 */
+	netfn = msg->rsp[0] >> 2;
+	cmd = msg->rsp[1];
+	chan = msg->rsp[3] & 0xf;
+
+	rcu_read_lock();
+	rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
+	if (rcvr) {
+		user = rcvr->user;
+		kref_get(&user->refcount);
+	} else
+		user = NULL;
+	rcu_read_unlock();
+
+	if (user == NULL) {
+		/* We didn't find a user, just give up. */
+		ipmi_inc_stat(intf, unhandled_commands);
+
+		/*
+		 * Don't do anything with these messages, just allow
+		 * them to be freed.
+		 */
+
+		rv = 0;
+	} else {
+		/* Deliver the message to the user. */
+		ipmi_inc_stat(intf, handled_commands);
+
+		recv_msg = ipmi_alloc_recv_msg();
+		if (!recv_msg) {
+			/*
+			 * We couldn't allocate memory for the
+			 * message, so requeue it for handling
+			 * later.
+			 */
+			rv = 1;
+			kref_put(&user->refcount, free_user);
+		} else {
+			/*
+			 * OEM Messages are expected to be delivered via
+			 * the system interface to SMS software.  We might
+			 * need to visit this again depending on OEM
+			 * requirements
+			 */
+			smi_addr = ((struct ipmi_system_interface_addr *)
+				    &(recv_msg->addr));
+			smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+			smi_addr->channel = IPMI_BMC_CHANNEL;
+			smi_addr->lun = msg->rsp[0] & 3;
+
+			recv_msg->user = user;
+			recv_msg->user_msg_data = NULL;
+			recv_msg->recv_type = IPMI_OEM_RECV_TYPE;
+			recv_msg->msg.netfn = msg->rsp[0] >> 2;
+			recv_msg->msg.cmd = msg->rsp[1];
+			recv_msg->msg.data = recv_msg->msg_data;
+
+			/*
+			 * The message starts at byte 4 which follows the
+			 * the Channel Byte in the "GET MESSAGE" command
+			 */
+			recv_msg->msg.data_len = msg->rsp_size - 4;
+			memcpy(recv_msg->msg_data,
+			       &(msg->rsp[4]),
+			       msg->rsp_size - 4);
+			deliver_response(recv_msg);
+		}
+	}
+
+	return rv;
+}
+
 static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
 				     struct ipmi_smi_msg  *msg)
 {
@@ -3519,6 +3647,17 @@
 			goto out;
 		}
 
+		/*
+		** We need to make sure the channels have been initialized.
+		** The channel_handler routine will set the "curr_channel"
+		** equal to or greater than IPMI_MAX_CHANNELS when all the
+		** channels for this interface have been initialized.
+		*/
+		if (intf->curr_channel < IPMI_MAX_CHANNELS) {
+			requeue = 1;     /* Just put the message back for now */
+			goto out;
+		}
+
 		switch (intf->channels[chan].medium) {
 		case IPMI_CHANNEL_MEDIUM_IPMB:
 			if (msg->rsp[4] & 0x04) {
@@ -3554,11 +3693,20 @@
 			break;
 
 		default:
-			/*
-			 * We don't handle the channel type, so just
-			 * free the message.
-			 */
-			requeue = 0;
+			/* Check for OEM Channels.  Clients had better
+			   register for these commands. */
+			if ((intf->channels[chan].medium
+			     >= IPMI_CHANNEL_MEDIUM_OEM_MIN)
+			    && (intf->channels[chan].medium
+				<= IPMI_CHANNEL_MEDIUM_OEM_MAX)) {
+				requeue = handle_oem_get_msg_cmd(intf, msg);
+			} else {
+				/*
+				 * We don't handle the channel type, so just
+				 * free the message.
+				 */
+				requeue = 0;
+			}
 		}
 
 	} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
@@ -3730,7 +3878,7 @@
 		list_add_tail(&msg->link, timeouts);
 		if (ent->broadcast)
 			ipmi_inc_stat(intf, timed_out_ipmb_broadcasts);
-		else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
+		else if (is_lan_addr(&ent->recv_msg->addr))
 			ipmi_inc_stat(intf, timed_out_lan_commands);
 		else
 			ipmi_inc_stat(intf, timed_out_ipmb_commands);
@@ -3744,15 +3892,17 @@
 		 */
 		ent->timeout = MAX_MSG_TIMEOUT;
 		ent->retries_left--;
-		if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
-			ipmi_inc_stat(intf, retransmitted_lan_commands);
-		else
-			ipmi_inc_stat(intf, retransmitted_ipmb_commands);
-
 		smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
 					    ent->seqid);
-		if (!smi_msg)
+		if (!smi_msg) {
+			if (is_lan_addr(&ent->recv_msg->addr))
+				ipmi_inc_stat(intf,
+					      dropped_rexmit_lan_commands);
+			else
+				ipmi_inc_stat(intf,
+					      dropped_rexmit_ipmb_commands);
 			return;
+		}
 
 		spin_unlock_irqrestore(&intf->seq_lock, *flags);
 
@@ -3764,10 +3914,17 @@
 		 * resent.
 		 */
 		handlers = intf->handlers;
-		if (handlers)
+		if (handlers) {
+			if (is_lan_addr(&ent->recv_msg->addr))
+				ipmi_inc_stat(intf,
+					      retransmitted_lan_commands);
+			else
+				ipmi_inc_stat(intf,
+					      retransmitted_ipmb_commands);
+
 			intf->handlers->sender(intf->send_info,
 					       smi_msg, 0);
-		else
+		} else
 			ipmi_free_smi_msg(smi_msg);
 
 		spin_lock_irqsave(&intf->seq_lock, *flags);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e58ea4c..2596446 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -82,12 +82,6 @@
 #define SI_SHORT_TIMEOUT_USEC  250 /* .25ms when the SM request a
 				      short timeout */
 
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR     0x01
-#define IPMI_BMC_EVT_MSG_INTR     0x02
-#define IPMI_BMC_EVT_MSG_BUFF     0x04
-#define IPMI_BMC_SYS_LOG          0x08
-
 enum si_intf_state {
 	SI_NORMAL,
 	SI_GETTING_FLAGS,
@@ -220,6 +214,9 @@
 			     OEM2_DATA_AVAIL)
 	unsigned char       msg_flags;
 
+	/* Does the BMC have an event buffer? */
+	char		    has_event_buffer;
+
 	/*
 	 * If set to true, this will request events the next time the
 	 * state machine is idle.
@@ -968,7 +965,8 @@
 {
 	struct smi_info *smi_info = send_info;
 
-	if (atomic_read(&smi_info->stop_operation))
+	if (atomic_read(&smi_info->stop_operation) ||
+				!smi_info->has_event_buffer)
 		return;
 
 	atomic_set(&smi_info->req_events, 1);
@@ -2407,26 +2405,9 @@
 };
 #endif /* CONFIG_PPC_OF */
 
-
-static int try_get_dev_id(struct smi_info *smi_info)
+static int wait_for_msg_done(struct smi_info *smi_info)
 {
-	unsigned char         msg[2];
-	unsigned char         *resp;
-	unsigned long         resp_len;
 	enum si_sm_result     smi_result;
-	int                   rv = 0;
-
-	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
-	if (!resp)
-		return -ENOMEM;
-
-	/*
-	 * Do a Get Device ID command, since it comes back with some
-	 * useful info.
-	 */
-	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
-	msg[1] = IPMI_GET_DEVICE_ID_CMD;
-	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 
 	smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
 	for (;;) {
@@ -2441,16 +2422,39 @@
 		} else
 			break;
 	}
-	if (smi_result == SI_SM_HOSED) {
+	if (smi_result == SI_SM_HOSED)
 		/*
 		 * We couldn't get the state machine to run, so whatever's at
 		 * the port is probably not an IPMI SMI interface.
 		 */
-		rv = -ENODEV;
-		goto out;
-	}
+		return -ENODEV;
 
-	/* Otherwise, we got some data. */
+	return 0;
+}
+
+static int try_get_dev_id(struct smi_info *smi_info)
+{
+	unsigned char         msg[2];
+	unsigned char         *resp;
+	unsigned long         resp_len;
+	int                   rv = 0;
+
+	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
+
+	/*
+	 * Do a Get Device ID command, since it comes back with some
+	 * useful info.
+	 */
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_GET_DEVICE_ID_CMD;
+	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+	rv = wait_for_msg_done(smi_info);
+	if (rv)
+		goto out;
+
 	resp_len = smi_info->handlers->get_result(smi_info->si_sm,
 						  resp, IPMI_MAX_MSG_LENGTH);
 
@@ -2462,6 +2466,88 @@
 	return rv;
 }
 
+static int try_enable_event_buffer(struct smi_info *smi_info)
+{
+	unsigned char         msg[3];
+	unsigned char         *resp;
+	unsigned long         resp_len;
+	int                   rv = 0;
+
+	resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+	if (!resp)
+		return -ENOMEM;
+
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+	rv = wait_for_msg_done(smi_info);
+	if (rv) {
+		printk(KERN_WARNING
+		       "ipmi_si: Error getting response from get global,"
+		       " enables command, the event buffer is not"
+		       " enabled.\n");
+		goto out;
+	}
+
+	resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+						  resp, IPMI_MAX_MSG_LENGTH);
+
+	if (resp_len < 4 ||
+			resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+			resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD   ||
+			resp[2] != 0) {
+		printk(KERN_WARNING
+		       "ipmi_si: Invalid return from get global"
+		       " enables command, cannot enable the event"
+		       " buffer.\n");
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
+		/* buffer is already enabled, nothing to do. */
+		goto out;
+
+	msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+	msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+	msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+	smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+	rv = wait_for_msg_done(smi_info);
+	if (rv) {
+		printk(KERN_WARNING
+		       "ipmi_si: Error getting response from set global,"
+		       " enables command, the event buffer is not"
+		       " enabled.\n");
+		goto out;
+	}
+
+	resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+						  resp, IPMI_MAX_MSG_LENGTH);
+
+	if (resp_len < 3 ||
+			resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+			resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+		printk(KERN_WARNING
+		       "ipmi_si: Invalid return from get global,"
+		       "enables command, not enable the event"
+		       " buffer.\n");
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (resp[2] != 0)
+		/*
+		 * An error when setting the event buffer bit means
+		 * that the event buffer is not supported.
+		 */
+		rv = -ENOENT;
+ out:
+	kfree(resp);
+	return rv;
+}
+
 static int type_file_read_proc(char *page, char **start, off_t off,
 			       int count, int *eof, void *data)
 {
@@ -2847,6 +2933,10 @@
 	new_smi->intf_num = smi_num;
 	smi_num++;
 
+	rv = try_enable_event_buffer(new_smi);
+	if (rv == 0)
+		new_smi->has_event_buffer = 1;
+
 	/*
 	 * Start clearing the flags before we enable interrupts or the
 	 * timer to avoid racing with the timer.
@@ -2863,7 +2953,7 @@
 		 */
 		new_smi->pdev = platform_device_alloc("ipmi_si",
 						      new_smi->intf_num);
-		if (rv) {
+		if (!new_smi->pdev) {
 			printk(KERN_ERR
 			       "ipmi_si_intf:"
 			       " Unable to allocate platform device\n");
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 3586b3b..8f05c38 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -301,33 +301,7 @@
 }
 #endif
 
-void __attribute__((weak))
-map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
-	/* nothing. architectures can override. */
-}
-
-void __attribute__((weak))
-unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
-	/* nothing. architectures can override. */
-}
-
-static void mmap_mem_open(struct vm_area_struct *vma)
-{
-	map_devmem(vma->vm_pgoff,  vma->vm_end - vma->vm_start,
-			vma->vm_page_prot);
-}
-
-static void mmap_mem_close(struct vm_area_struct *vma)
-{
-	unmap_devmem(vma->vm_pgoff,  vma->vm_end - vma->vm_start,
-			vma->vm_page_prot);
-}
-
 static struct vm_operations_struct mmap_mem_ops = {
-	.open  = mmap_mem_open,
-	.close = mmap_mem_close,
 #ifdef CONFIG_HAVE_IOREMAP_PROT
 	.access = generic_access_phys
 #endif
@@ -362,7 +336,6 @@
 			    vma->vm_pgoff,
 			    size,
 			    vma->vm_page_prot)) {
-		unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot);
 		return -EAGAIN;
 	}
 	return 0;
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 2c1d133..08151d4 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -2274,7 +2274,7 @@
 				    continue; /* nothing to display */
 				}
 				/* Glyph not found */
-				if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
+				if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
 				    /* In legacy mode use the glyph we get by a 1:1 mapping.
 				       This would make absolutely no sense with Unicode in mind,
 				       but do this for ASCII characters since a font may lack
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index ee19b6e..40bd8c6 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -57,7 +57,7 @@
 	return v2;
 }
 
-static cycle_t acpi_pm_read(void)
+static cycle_t acpi_pm_read(struct clocksource *cs)
 {
 	return (cycle_t)read_pmtmr();
 }
@@ -83,7 +83,7 @@
 }
 __setup("acpi_pm_good", acpi_pm_good_setup);
 
-static cycle_t acpi_pm_read_slow(void)
+static cycle_t acpi_pm_read_slow(struct clocksource *cs)
 {
 	return (cycle_t)acpi_pm_read_verified();
 }
@@ -156,9 +156,9 @@
 	unsigned long count, delta;
 
 	mach_prepare_counter();
-	value1 = clocksource_acpi_pm.read();
+	value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 	mach_countup(&count);
-	value2 = clocksource_acpi_pm.read();
+	value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 	delta = (value2 - value1) & ACPI_PM_MASK;
 
 	/* Check that the PMTMR delta is within 5% of what we expect */
@@ -195,9 +195,9 @@
 	/* "verify" this timing source: */
 	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
 		udelay(100 * j);
-		value1 = clocksource_acpi_pm.read();
+		value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 		for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
-			value2 = clocksource_acpi_pm.read();
+			value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
 			if (value2 == value1)
 				continue;
 			if (value2 > value1)
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
index 8615059..64e528e 100644
--- a/drivers/clocksource/cyclone.c
+++ b/drivers/clocksource/cyclone.c
@@ -19,7 +19,7 @@
 int use_cyclone = 0;
 static void __iomem *cyclone_ptr;
 
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
 {
 	return (cycle_t)readl(cyclone_ptr);
 }
diff --git a/drivers/clocksource/scx200_hrt.c b/drivers/clocksource/scx200_hrt.c
index b92da67..27f4d96 100644
--- a/drivers/clocksource/scx200_hrt.c
+++ b/drivers/clocksource/scx200_hrt.c
@@ -43,7 +43,7 @@
 /* The base timer frequency, * 27 if selected */
 #define HRT_FREQ   1000000
 
-static cycle_t read_hrt(void)
+static cycle_t read_hrt(struct clocksource *cs)
 {
 	/* Read the timer value */
 	return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 254f106..01b886e 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -39,7 +39,7 @@
 
 static void __iomem *tcaddr;
 
-static cycle_t tc_get_cycles(void)
+static cycle_t tc_get_cycles(struct clocksource *cs)
 {
 	unsigned long	flags;
 	u32		lower, upper;
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 4637a4a..7c8c2d7 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -674,7 +674,7 @@
 	int row_index;
 
 	err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
-	if (err_detect)
+	if (!err_detect)
 		return;
 
 	mpc85xx_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n",
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index d009661..ef87861 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -159,6 +159,9 @@
 int drm_setmaster_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file_priv)
 {
+	if (file_priv->is_master)
+		return 0;
+
 	if (file_priv->minor->master && file_priv->minor->master != file_priv->master)
 		return -EINVAL;
 
@@ -169,6 +172,7 @@
 	    file_priv->minor->master != file_priv->master) {
 		mutex_lock(&dev->struct_mutex);
 		file_priv->minor->master = drm_master_get(file_priv->master);
+		file_priv->is_master = 1;
 		mutex_unlock(&dev->struct_mutex);
 	}
 
@@ -178,10 +182,15 @@
 int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv)
 {
-	if (!file_priv->master)
+	if (!file_priv->is_master)
 		return -EINVAL;
+
+	if (!file_priv->minor->master)
+		return -EINVAL;
+
 	mutex_lock(&dev->struct_mutex);
 	drm_master_put(&file_priv->minor->master);
+	file_priv->is_master = 0;
 	mutex_unlock(&dev->struct_mutex);
 	return 0;
 }
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index bc0c684..022876a 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -132,6 +132,7 @@
  */
 static void drm_sysfs_device_release(struct device *dev)
 {
+	memset(dev, 0, sizeof(struct device));
 	return;
 }
 
diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c
index 6942772..8dc1fd3 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -370,11 +370,8 @@
 	if (mboxes & MBOX_ACPI) {
 		DRM_DEBUG("Public ACPI methods supported\n");
 		opregion->acpi = base + OPREGION_ACPI_OFFSET;
-		if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
 			intel_didl_outputs(dev);
-			if (!resume)
-				acpi_video_register();
-		}
 	} else {
 		DRM_DEBUG("Public ACPI methods not supported\n");
 		err = -ENOTSUPP;
@@ -391,6 +388,10 @@
 		opregion->asle = base + OPREGION_ASLE_OFFSET;
 	}
 
+	if (!resume)
+		acpi_video_register();
+
+
 	/* Notify BIOS we are ready to handle ACPI video ext notifs.
 	 * Right now, all the events are handled by the ACPI video module.
 	 * We don't actually need to do anything with them. */
diff --git a/drivers/gpu/drm/via/via_dma.c b/drivers/gpu/drm/via/via_dma.c
index 7a339db..bfb92d2 100644
--- a/drivers/gpu/drm/via/via_dma.c
+++ b/drivers/gpu/drm/via/via_dma.c
@@ -481,11 +481,13 @@
 {
 	int count = 10000000;
 
-	while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && count--);
+	while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count)
+		;
 
-	while (count-- && (VIA_READ(VIA_REG_STATUS) &
+	while (count && (VIA_READ(VIA_REG_STATUS) &
 			   (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY |
-			    VIA_3D_ENG_BUSY))) ;
+			    VIA_3D_ENG_BUSY)))
+		--count;
 	return count;
 }
 
@@ -705,7 +707,7 @@
 	switch (d_siz->func) {
 	case VIA_CMDBUF_SPACE:
 		while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size)
-		       && count--) {
+		       && --count) {
 			if (!d_siz->wait) {
 				break;
 			}
@@ -717,7 +719,7 @@
 		break;
 	case VIA_CMDBUF_LAG:
 		while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size)
-		       && count--) {
+		       && --count) {
 			if (!d_siz->wait) {
 				break;
 			}
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
index 353a35b..0332a95 100644
--- a/drivers/ide/cs5536.c
+++ b/drivers/ide/cs5536.c
@@ -236,6 +236,7 @@
 	.dma_test_irq		= ide_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
+	.dma_sff_read_status	= ide_dma_sff_read_status,
 };
 
 static const struct ide_port_info cs5536_info = {
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index a0eb87f..0feb66c 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -3,7 +3,7 @@
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
  * Portions Copyright (C) 2007		Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2008	MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009	MontaVista Software, Inc.
  *
  * Thanks to HighPoint Technologies for their assistance, and hardware.
  * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
@@ -114,6 +114,8 @@
  *   the register setting lists into the table indexed by the clock selected
  * - set the correct hwif->ultra_mask for each individual chip
  * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
+ * - stop resetting HPT370's state machine before each DMA transfer as that has
+ *   caused more harm than good
  *	Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
  */
 
@@ -133,7 +135,7 @@
 #define DRV_NAME "hpt366"
 
 /* various tuning parameters */
-#define HPT_RESET_STATE_ENGINE
+#undef	HPT_RESET_STATE_ENGINE
 #undef	HPT_DELAY_INTERRUPT
 
 static const char *quirk_drives[] = {
@@ -808,7 +810,7 @@
 	/* get DMA command mode */
 	dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
 	/* stop DMA */
-	outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
+	outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
 	hpt370_clear_engine(drive);
 }
 
@@ -825,11 +827,11 @@
 	ide_hwif_t *hwif	= drive->hwif;
 	u8  dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
 
-	if (dma_stat & 0x01) {
+	if (dma_stat & ATA_DMA_ACTIVE) {
 		/* wait a little */
 		udelay(20);
 		dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-		if (dma_stat & 0x01)
+		if (dma_stat & ATA_DMA_ACTIVE)
 			hpt370_irq_timeout(drive);
 	}
 	return ide_dma_end(drive);
@@ -851,7 +853,7 @@
 
 	dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
 	/* return 1 if INTR asserted */
-	if (dma_stat & 4)
+	if (dma_stat & ATA_DMA_INTR)
 		return 1;
 
 	return 0;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 3aec19d..3d4e099 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -609,7 +609,7 @@
 	struct request *rq = hwif->rq;
 	ide_expiry_t *expiry = NULL;
 	int dma_error = 0, dma, thislen, uptodate = 0;
-	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors;
+	int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
 	int sense = blk_sense_request(rq);
 	unsigned int timeout;
 	u16 len;
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 1aebdf1..4b6b71e 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -7,6 +7,7 @@
 #include <linux/mutex.h>
 #include <linux/ide.h>
 #include <linux/hdreg.h>
+#include <linux/dmi.h>
 
 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
 #define IDE_DISK_MINORS		(1 << PARTN_BITS)
@@ -99,6 +100,19 @@
 		(void)drive->disk_ops->get_capacity(drive);
 }
 
+static const struct dmi_system_id ide_coldreboot_table[] = {
+	{
+		/* Acer TravelMate 66x cuts power during reboot */
+		.ident   = "Acer TravelMate 660",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+		},
+	},
+
+	{ }	/* terminate list */
+};
+
 static void ide_gd_shutdown(ide_drive_t *drive)
 {
 #ifdef	CONFIG_ALPHA
@@ -115,7 +129,8 @@
 	   the disk to expire its write cache. */
 	if (system_state != SYSTEM_POWER_OFF) {
 #else
-	if (system_state == SYSTEM_RESTART) {
+	if (system_state == SYSTEM_RESTART &&
+		!dmi_check_system(ide_coldreboot_table)) {
 #endif
 		drive->disk_ops->flush(drive);
 		return;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 2ae02b8..35dc38d 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -102,11 +102,14 @@
 			drive->dev_flags |= IDE_DFLAG_PARKED;
 	}
 
-	if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
-		memcpy(rq->special, cmd, sizeof(*cmd));
+	if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+		struct ide_cmd *orig_cmd = rq->special;
 
-	if (cmd->tf_flags & IDE_TFLAG_DYN)
-		kfree(cmd);
+		if (cmd->tf_flags & IDE_TFLAG_DYN)
+			kfree(orig_cmd);
+		else
+			memcpy(orig_cmd, cmd, sizeof(*cmd));
+	}
 }
 
 /* obsolete, blk_rq_bytes() should be used instead */
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index c7acca0..09d813d 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -39,27 +39,12 @@
 /* Primary Control Offset */
 #define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
 
-/*
- * PalmChip 3710 IDE Controller UDMA timing structure Definition
- */
-struct palm_bk3710_udmatiming {
-	unsigned int rptime;	/* Ready to pause time  */
-	unsigned int cycletime;	/* Cycle Time           */
-};
-
 #define BK3710_BMICP		0x00
 #define BK3710_BMISP		0x02
 #define BK3710_BMIDTP		0x04
-#define BK3710_BMICS		0x08
-#define BK3710_BMISS		0x0A
-#define BK3710_BMIDTS		0x0C
 #define BK3710_IDETIMP		0x40
-#define BK3710_IDETIMS		0x42
-#define BK3710_SIDETIM		0x44
-#define BK3710_SLEWCTL		0x45
 #define BK3710_IDESTATUS	0x47
 #define BK3710_UDMACTL		0x48
-#define BK3710_UDMATIM		0x4A
 #define BK3710_MISCCTL		0x50
 #define BK3710_REGSTB		0x54
 #define BK3710_REGRCVR		0x58
@@ -71,17 +56,22 @@
 #define BK3710_UDMATRP		0x70
 #define BK3710_UDMAENV		0x74
 #define BK3710_IORDYTMP		0x78
-#define BK3710_IORDYTMS		0x7C
 
 static unsigned ideclk_period; /* in nanoseconds */
 
+struct palm_bk3710_udmatiming {
+	unsigned int rptime;	/* tRP -- Ready to pause time (nsec) */
+	unsigned int cycletime;	/* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+				/* tENV is always a minimum of 20 nsec */
+};
+
 static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
-	{160, 240},		/* UDMA Mode 0 */
-	{125, 160},		/* UDMA Mode 1 */
-	{100, 120},		/* UDMA Mode 2 */
-	{100, 90},		/* UDMA Mode 3 */
-	{100, 60},		/* UDMA Mode 4 */
-	{85,  40},		/* UDMA Mode 5 */
+	{ 160, 240 / 2 },	/* UDMA Mode 0 */
+	{ 125, 160 / 2 },	/* UDMA Mode 1 */
+	{ 100, 120 / 2 },	/* UDMA Mode 2 */
+	{ 100,  90 / 2 },	/* UDMA Mode 3 */
+	{ 100,  60 / 2 },	/* UDMA Mode 4 */
+	{  85,  40 / 2 },	/* UDMA Mode 5 */
 };
 
 static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
@@ -98,11 +88,6 @@
 	trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
 			   ideclk_period) - 1;
 
-	/* udmatim Register */
-	val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
-	val16 |= (mode << (dev ? 4 : 0));
-	writew(val16, base + BK3710_UDMATIM);
-
 	/* udmastb Ultra DMA Access Strobe Width */
 	val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
 	val32 |= (t0 << (dev ? 8 : 0));
@@ -163,10 +148,11 @@
 	u32 val32;
 	struct ide_timing *t;
 
+	t = ide_timing_find_mode(XFER_PIO_0 + mode);
+
 	/* PIO Data Setup */
 	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
-	t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
-			  ideclk_period);
+	t2 = DIV_ROUND_UP(t->active, ideclk_period);
 
 	t2i = t0 - t2 - 1;
 	t2 -= 1;
@@ -187,7 +173,6 @@
 	}
 
 	/* TASKFILE Setup */
-	t = ide_timing_find_mode(XFER_PIO_0 + mode);
 	t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
 	t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
 
@@ -236,42 +221,23 @@
 static void __devinit palm_bk3710_chipinit(void __iomem *base)
 {
 	/*
-	 * enable the reset_en of ATA controller so that when ata signals
-	 * are brought out, by writing into device config. at that
-	 * time por_n signal should not be 'Z' and have a stable value.
+	 * REVISIT:  the ATA reset signal needs to be managed through a
+	 * GPIO, which means it should come from platform_data.  Until
+	 * we get and use such information, we have to trust that things
+	 * have been reset before we get here.
 	 */
-	writel(0x0300, base + BK3710_MISCCTL);
-
-	/* wait for some time and deassert the reset of ATA Device. */
-	mdelay(100);
-
-	/* Deassert the Reset */
-	writel(0x0200, base + BK3710_MISCCTL);
 
 	/*
 	 * Program the IDETIMP Register Value based on the following assumptions
 	 *
 	 * (ATA_IDETIMP_IDEEN		, ENABLE ) |
-	 * (ATA_IDETIMP_SLVTIMEN	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSMPL		, 70NS)    |
-	 * (ATA_IDETIMP_RDYRCVRY	, 50NS)    |
-	 * (ATA_IDETIMP_DMAFTIM1	, PIOCOMP) |
 	 * (ATA_IDETIMP_PREPOST1	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSEN1		, DISABLE) |
-	 * (ATA_IDETIMP_PIOFTIM1	, DISABLE) |
-	 * (ATA_IDETIMP_DMAFTIM0	, PIOCOMP) |
 	 * (ATA_IDETIMP_PREPOST0	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSEN0		, DISABLE) |
-	 * (ATA_IDETIMP_PIOFTIM0	, DISABLE)
+	 *
+	 * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+	 * from enabling prefetch/postwrite.
 	 */
-	writew(0xB388, base + BK3710_IDETIMP);
-
-	/*
-	 * Configure  SIDETIM  Register
-	 * (ATA_SIDETIM_RDYSMPS1	,120NS ) |
-	 * (ATA_SIDETIM_RDYRCYS1	,120NS )
-	 */
-	writeb(0, base + BK3710_SIDETIM);
+	writew(BIT(15), base + BK3710_IDETIMP);
 
 	/*
 	 * UDMACTL Ultra-ATA DMA Control
@@ -283,11 +249,11 @@
 
 	/*
 	 * MISCCTL Miscellaneous Conrol Register
-	 * (ATA_MISCCTL_RSTMODEP	, 1) |
-	 * (ATA_MISCCTL_RESETP		, 0) |
+	 * (ATA_MISCCTL_HWNHLD1P	, 1 cycle)
+	 * (ATA_MISCCTL_HWNHLD0P	, 1 cycle)
 	 * (ATA_MISCCTL_TIMORIDE	, 1)
 	 */
-	writel(0x201, base + BK3710_MISCCTL);
+	writel(0x001, base + BK3710_MISCCTL);
 
 	/*
 	 * IORDYTMP IORDY Timer for Primary Register
@@ -357,10 +323,9 @@
 
 	clk_enable(clk);
 	rate = clk_get_rate(clk);
-	ideclk_period = 1000000000UL / rate;
 
-	/* Register the IDE interface with Linux ATA Interface */
-	memset(&hw, 0, sizeof(hw));
+	/* NOTE:  round *down* to meet minimum timings; we count in clocks */
+	ideclk_period = 1000000000UL / rate;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (mem == NULL) {
@@ -390,6 +355,7 @@
 	/* Configure the Palm Chip controller */
 	palm_bk3710_chipinit(base);
 
+	memset(&hw, 0, sizeof(hw));
 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
 		hw.io_ports_array[i] = (unsigned long)
 				(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
@@ -402,6 +368,7 @@
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
 							     ATA_UDMA5;
 
+	/* Register the IDE interface with Linux */
 	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
 	if (rc)
 		goto out;
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 052b9bf..f76e4e6 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1682,7 +1682,7 @@
 	 * The +2 is +1 for the stop command and +1 to allow for
 	 * aligning the start address to a multiple of 16 bytes.
 	 */
-	pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
+	pmif->dma_table_cpu = pci_alloc_consistent(
 		dev,
 		(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
 		&hwif->dmatable_dma);
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index ebf4be5..2d175b5 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -50,9 +50,8 @@
 
 static struct bus_type gameport_bus;
 
-static void gameport_add_driver(struct gameport_driver *drv);
 static void gameport_add_port(struct gameport *gameport);
-static void gameport_destroy_port(struct gameport *gameport);
+static void gameport_attach_driver(struct gameport_driver *drv);
 static void gameport_reconnect_port(struct gameport *gameport);
 static void gameport_disconnect_port(struct gameport *gameport);
 
@@ -230,7 +229,6 @@
 
 enum gameport_event_type {
 	GAMEPORT_REGISTER_PORT,
-	GAMEPORT_REGISTER_DRIVER,
 	GAMEPORT_ATTACH_DRIVER,
 };
 
@@ -374,8 +372,8 @@
 				gameport_add_port(event->object);
 				break;
 
-			case GAMEPORT_REGISTER_DRIVER:
-				gameport_add_driver(event->object);
+			case GAMEPORT_ATTACH_DRIVER:
+				gameport_attach_driver(event->object);
 				break;
 
 			default:
@@ -706,14 +704,14 @@
 	return 0;
 }
 
-static void gameport_add_driver(struct gameport_driver *drv)
+static void gameport_attach_driver(struct gameport_driver *drv)
 {
 	int error;
 
-	error = driver_register(&drv->driver);
+	error = driver_attach(&drv->driver);
 	if (error)
 		printk(KERN_ERR
-			"gameport: driver_register() failed for %s, error: %d\n",
+			"gameport: driver_attach() failed for %s, error: %d\n",
 			drv->driver.name, error);
 }
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index d44065d..935a1835 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1549,7 +1549,6 @@
 		return error;
 	list_add_tail_rcu(&handle->d_node, &dev->h_list);
 	mutex_unlock(&dev->mutex);
-	synchronize_rcu();
 
 	/*
 	 * Since we are supposed to be called from ->connect()
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index f999dc6..444dec0 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -880,7 +880,7 @@
 };
 
 /*
- * Samsung NC10 with Fn+F? key release not working
+ * Samsung NC10,NC20 with Fn+F? key release not working
  */
 static unsigned int atkbd_samsung_forced_release_keys[] = {
 	0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
@@ -1534,6 +1534,24 @@
 		.driver_data = atkbd_samsung_forced_release_keys,
 	},
 	{
+		.ident = "Samsung NC20",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
+		.ident = "Samsung SQ45S70S",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+		},
+		.callback = atkbd_setup_forced_release,
+		.driver_data = atkbd_samsung_forced_release_keys,
+	},
+	{
 		.ident = "Fujitsu Amilo PA 1510",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index e94b7d7..d427f32 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -252,7 +252,7 @@
 	}
 
 	error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
-				 IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
+				0, DRV_NAME, pdev);
 	if (error) {
 		printk(KERN_ERR DRV_NAME
 			": unable to claim irq %d; error %d\n",
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 203abac..5c0a631 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -214,7 +214,7 @@
 
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
-	depends on GSC || HP300
+	depends on (GSC || HP300) && SERIO
 	select HP_SDC
 	help
 	  Say Y here if you want to support the built-in real time clock
diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c
index d196abf..5f27817 100644
--- a/drivers/input/mouse/maplemouse.c
+++ b/drivers/input/mouse/maplemouse.c
@@ -2,8 +2,8 @@
  *	SEGA Dreamcast mouse driver
  *	Based on drivers/usb/usbmouse.c
  *
- *	Copyright Yaegashi Takeshi, 2001
- *	Adrian McMenamin, 2008
+ *	Copyright (c) Yaegashi Takeshi, 2001
+ *	Copyright (c) Adrian McMenamin, 2008 - 2009
  */
 
 #include <linux/kernel.h>
@@ -29,7 +29,7 @@
 	struct maple_device *mapledev = mq->dev;
 	struct dc_mouse *mse = maple_get_drvdata(mapledev);
 	struct input_dev *dev = mse->dev;
-	unsigned char *res = mq->recvbuf;
+	unsigned char *res = mq->recvbuf->buf;
 
 	buttons = ~res[8];
 	relx = *(unsigned short *)(res + 12) - 512;
@@ -47,7 +47,7 @@
 
 static int dc_mouse_open(struct input_dev *dev)
 {
-	struct dc_mouse *mse = dev->dev.platform_data;
+	struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
 
 	maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50,
 		MAPLE_FUNC_MOUSE);
@@ -57,29 +57,33 @@
 
 static void dc_mouse_close(struct input_dev *dev)
 {
-	struct dc_mouse *mse = dev->dev.platform_data;
+	struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
 
 	maple_getcond_callback(mse->mdev, dc_mouse_callback, 0,
 		MAPLE_FUNC_MOUSE);
 }
 
-
+/* allow the mouse to be used */
 static int __devinit probe_maple_mouse(struct device *dev)
 {
 	struct maple_device *mdev = to_maple_dev(dev);
 	struct maple_driver *mdrv = to_maple_driver(dev->driver);
+	int error;
 	struct input_dev *input_dev;
 	struct dc_mouse *mse;
-	int error;
 
 	mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL);
-	input_dev = input_allocate_device();
-
-	if (!mse || !input_dev) {
+	if (!mse) {
 		error = -ENOMEM;
 		goto fail;
 	}
 
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		error = -ENOMEM;
+		goto fail_nomem;
+	}
+
 	mse->dev = input_dev;
 	mse->mdev = mdev;
 
@@ -89,25 +93,24 @@
 		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
 	input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
 		BIT_MASK(REL_WHEEL);
-	input_dev->name = mdev->product_name;
-	input_dev->id.bustype = BUS_HOST;
 	input_dev->open = dc_mouse_open;
 	input_dev->close = dc_mouse_close;
+	input_dev->name = mdev->product_name;
+	input_dev->id.bustype = BUS_HOST;
+	error =	input_register_device(input_dev);
+	if (error)
+		goto fail_register;
 
 	mdev->driver = mdrv;
 	maple_set_drvdata(mdev, mse);
 
-	error =	input_register_device(input_dev);
-	if (error)
-		goto fail;
+	return error;
 
-	return 0;
-
-fail:
+fail_register:
 	input_free_device(input_dev);
-	maple_set_drvdata(mdev, NULL);
+fail_nomem:
 	kfree(mse);
-	mdev->driver = NULL;
+fail:
 	return error;
 }
 
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index f63995f..3941f97 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -108,7 +108,6 @@
  */
 static int __init pc110pad_init(void)
 {
-	struct pci_dev *dev;
 	int err;
 
 	if (!no_pci_devices())
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index bfe4924..1c9410d 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -819,6 +819,7 @@
 MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
 
 static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
 
 static struct parisc_driver hp_sdc_driver = {
 	.name =		"hp_sdc",
@@ -930,8 +931,15 @@
 
 #if defined(__hppa__)
 
+static void request_module_delayed(struct work_struct *work)
+{
+	request_module("hp_sdc_mlc");
+}
+
 static int __init hp_sdc_init_hppa(struct parisc_device *d)
 {
+	int ret;
+
 	if (!d)
 		return 1;
 	if (hp_sdc.dev != NULL)
@@ -944,13 +952,26 @@
 	hp_sdc.data_io		= d->hpa.start + 0x800;
 	hp_sdc.status_io	= d->hpa.start + 0x801;
 
-	return hp_sdc_init();
+	INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+	ret = hp_sdc_init();
+	/* after sucessfull initialization give SDC some time to settle
+	 * and then load the hp_sdc_mlc upper layer driver */
+	if (!ret)
+		schedule_delayed_work(&moduleloader_work,
+			msecs_to_jiffies(2000));
+
+	return ret;
 }
 
 #endif /* __hppa__ */
 
 static void hp_sdc_exit(void)
 {
+	/* do nothing if we don't have a SDC */
+	if (!hp_sdc.dev)
+		return;
+
 	write_lock_irq(&hp_sdc.lock);
 
 	/* Turn off all maskable "sub-function" irq's. */
@@ -969,6 +990,7 @@
 	tasklet_kill(&hp_sdc.task);
 
 #if defined(__hppa__)
+	cancel_delayed_work_sync(&moduleloader_work);
 	if (unregister_parisc_driver(&hp_sdc_driver))
 		printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
 #endif
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 83ed2d5..fb8a3cd 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -377,6 +377,24 @@
 	{ }
 };
 
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
+	{
+		.ident = "LG Electronics X110",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "X110"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+		},
+	},
+	{ }
+};
+
 #ifdef CONFIG_PNP
 static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
 	{
@@ -386,6 +404,13 @@
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 		},
 	},
+	{
+		.ident = "MSI Wind U-100",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+		},
+	},
 	{ }
 };
 #endif
@@ -698,6 +723,9 @@
 #endif
 
 #ifdef CONFIG_X86
+	if (dmi_check_system(i8042_dmi_reset_table))
+		i8042_reset = 1;
+
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = 1;
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 170f71e..3cffb70 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -712,22 +712,43 @@
 static int i8042_controller_selftest(void)
 {
 	unsigned char param;
+	int i = 0;
 
 	if (!i8042_reset)
 		return 0;
 
-	if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-		printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
-		return -ENODEV;
-	}
+	/*
+	 * We try this 5 times; on some really fragile systems this does not
+	 * take the first time...
+	 */
+	do {
 
-	if (param != I8042_RET_CTL_TEST) {
+		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
+			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			return -ENODEV;
+		}
+
+		if (param == I8042_RET_CTL_TEST)
+			return 0;
+
 		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			 param, I8042_RET_CTL_TEST);
-		return -EIO;
-	}
+			param, I8042_RET_CTL_TEST);
+		msleep(50);
+	} while (i++ < 5);
 
+#ifdef CONFIG_X86
+	/*
+	 * On x86, we don't fail entire i8042 initialization if controller
+	 * reset fails in hopes that keyboard port will still be functional
+	 * and user will still get a working keyboard. This is especially
+	 * important on netbooks. On other arches we trust hardware more.
+	 */
+	printk(KERN_INFO
+		"i8042: giving up on controller selftest, continuing anyway...\n");
 	return 0;
+#else
+	return -EIO;
+#endif
 }
 
 /*
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index e4728a2..ecaeb7e 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -736,8 +736,8 @@
 
 	/* Request AD7877 /DAV GPIO interrupt */
 
-	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING |
-			IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts);
+	err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
+			spi->dev.driver->name, ts);
 	if (err) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		goto err_free_mem;
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index ea4c61d..5d8a703 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -448,8 +448,7 @@
 	ad7879_setup(ts);
 
 	err = request_irq(bus->irq, ad7879_irq,
-			  IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM,
-			  bus->dev.driver->name, ts);
+			  IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
 
 	if (err) {
 		dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 056ac77..2b01e56 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -127,6 +127,8 @@
 	void			(*filter_cleanup)(void *data);
 	int			(*get_pendown_state)(void);
 	int			gpio_pendown;
+
+	void			(*wait_for_sync)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -511,6 +513,10 @@
 	return !gpio_get_value(ts->gpio_pendown);
 }
 
+static void null_wait_for_sync(void)
+{
+}
+
 /*
  * PENIRQ only kicks the timer.  The timer only reissues the SPI transfer,
  * to retrieve touchscreen status.
@@ -686,6 +692,7 @@
 	default:
 		BUG();
 	}
+	ts->wait_for_sync();
 	status = spi_async(ts->spi, m);
 	if (status)
 		dev_err(&ts->spi->dev, "spi_async --> %d\n",
@@ -723,6 +730,7 @@
 	} else {
 		/* pen is still down, continue with the measurement */
 		ts->msg_idx = 0;
+		ts->wait_for_sync();
 		status = spi_async(ts->spi, &ts->msg[0]);
 		if (status)
 			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
@@ -746,7 +754,7 @@
 			 * that here.  (The "generic irq" framework may help...)
 			 */
 			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
+			disable_irq_nosync(ts->spi->irq);
 			ts->pending = 1;
 			hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
 					HRTIMER_MODE_REL);
@@ -947,6 +955,8 @@
 		ts->penirq_recheck_delay_usecs =
 				pdata->penirq_recheck_delay_usecs;
 
+	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
 
 	input_dev->name = "ADS784x Touchscreen";
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index fa67d78..3ffd4c4 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
  *	Fengwei Yin <fengwei.yin@marvell.com>
+ *	Bin Yang  <bin.yang@marvell.com>
  *	Eric Miao <eric.miao@marvell.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -175,6 +176,16 @@
 			goto err_reset;
 
 		touch->state = STATE_STOP;
+
+		/* FIXME: PEN_{UP/DOWN} events are expected to be
+		 * available by stopping TSI, but this is found not
+		 * always true, delay and simulate such an event
+		 * here is more reliable
+		 */
+		mdelay(1);
+		da9034_event_handler(touch,
+				     is_pen_down(touch) ? EVENT_PEN_DOWN :
+							  EVENT_PEN_UP);
 		break;
 
 	case STATE_STOP:
@@ -189,8 +200,6 @@
 			report_pen_up(touch);
 			touch->state = STATE_IDLE;
 		}
-
-		input_sync(touch->input_dev);
 		break;
 
 	case STATE_WAIT:
@@ -200,8 +209,10 @@
 		if (is_pen_down(touch)) {
 			start_tsi(touch);
 			touch->state = STATE_BUSY;
-		} else
+		} else {
+			report_pen_up(touch);
 			touch->state = STATE_IDLE;
+		}
 		break;
 	}
 	return;
@@ -226,16 +237,12 @@
 	struct da9034_touch *touch =
 		container_of(nb, struct da9034_touch, notifier);
 
-	if (event & DA9034_EVENT_PEN_DOWN) {
-		if (is_pen_down(touch))
-			da9034_event_handler(touch, EVENT_PEN_DOWN);
-		else
-			da9034_event_handler(touch, EVENT_PEN_UP);
-	}
-
 	if (event & DA9034_EVENT_TSI_READY)
 		da9034_event_handler(touch, EVENT_TSI_READY);
 
+	if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+		da9034_event_handler(touch, EVENT_PEN_DOWN);
+
 	return 0;
 }
 
@@ -385,6 +392,6 @@
 module_exit(da9034_touch_exit);
 
 MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:da9034-touch");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index dfa6a84..4cc047a 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -111,13 +111,12 @@
 #else
 static void wm97xx_acc_pen_up(struct wm97xx *wm)
 {
-	int count = 16;
+	unsigned int count;
+
 	schedule_timeout_uninterruptible(1);
 
-	while (count < 16) {
+	for (count = 0; count < 16; count++)
 		MODR;
-		count--;
-	}
 }
 #endif
 
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cec480b..69af838 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -370,8 +370,7 @@
 	 * provided. */
 	BUG_ON(!wm->mach_ops->irq_enable);
 
-	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
-			IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
 			"wm97xx-pen", wm)) {
 		dev_err(wm->dev,
 			"Failed to register pen down interrupt, polling");
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index ec3c0e5..2b3a055 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -149,14 +149,7 @@
 	if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
 	        /* Special case handling for pipe reset */
 		le16_to_cpus(&ctrl_msg->dr.wIndex);
-
-		/* toggle is reset on clear */
-		usb_settoggle(adapter->usb_dev, 
-			      ctrl_msg->dr.wIndex & ~USB_DIR_IN, 
-			      (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
-			      0);
-
-
+		usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
 	}
 	
 	if (ctrl_msg->complete)
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index ac8a4a3..af92a17 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -158,7 +158,8 @@
 /* segments.c: */
 void setup_default_gdt_entries(struct lguest_ro_state *state);
 void setup_guest_gdt(struct lg_cpu *cpu);
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num);
+void load_guest_gdt_entry(struct lg_cpu *cpu, unsigned int i,
+			  u32 low, u32 hi);
 void guest_load_tls(struct lg_cpu *cpu, unsigned long tls_array);
 void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt);
 void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt);
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 4f15439..7ede64f 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -144,18 +144,19 @@
 			gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT).
- * We copy it from the Guest and tweak the entries. */
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num)
+/*H:620 This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in. */
+void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 {
 	/* We assume the Guest has the same number of GDT entries as the
 	 * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
 	if (num > ARRAY_SIZE(cpu->arch.gdt))
 		kill_guest(cpu, "too many gdt entries %i", num);
 
-	/* We read the whole thing in, then fix it up. */
-	__lgread(cpu, cpu->arch.gdt, table, num * sizeof(cpu->arch.gdt[0]));
-	fixup_gdt_table(cpu, 0, ARRAY_SIZE(cpu->arch.gdt));
+	/* Set it up, then fix it. */
+	cpu->arch.gdt[num].a = lo;
+	cpu->arch.gdt[num].b = hi;
+	fixup_gdt_table(cpu, num, num+1);
 	/* Mark that the GDT changed so the core knows it has to copy it again,
 	 * even if the Guest is run on the same CPU. */
 	cpu->changed |= CHANGED_GDT;
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index a6b7176..1a83910 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -324,6 +324,11 @@
 	u8 insn[3] = {0xcd, 0x1f, 0x90};
 
 	__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
+	/* The above write might have caused a copy of that page to be made
+	 * (if it was read-only).  We need to make sure the Guest has
+	 * up-to-date pagetables.  As this doesn't happen often, we can just
+	 * drop them all. */
+	guest_pagetable_clear_all(cpu);
 }
 
 static bool is_hypercall(struct lg_cpu *cpu)
@@ -563,8 +568,8 @@
 int lguest_arch_do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 {
 	switch (args->arg0) {
-	case LHCALL_LOAD_GDT:
-		load_guest_gdt(cpu, args->arg1, args->arg2);
+	case LHCALL_LOAD_GDT_ENTRY:
+		load_guest_gdt_entry(cpu, args->arg1, args->arg2, args->arg3);
 		break;
 	case LHCALL_LOAD_IDT_ENTRY:
 		load_guest_idt_entry(cpu, args->arg1, args->arg2, args->arg3);
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 173cf55..3d90683 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -123,7 +123,7 @@
 
 config PMAC_MEDIABAY
 	bool "Support PowerBook hotswap media bay"
-	depends on PPC_PMAC && PPC32
+	depends on PPC_PMAC && PPC32 && BLOCK
 	help
 	  This option adds support for older PowerBook's hotswap media bay
 	  that can contains batteries, floppy drives, or IDE devices. PCI
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index d7e46d3..029ad8c 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -18,7 +18,6 @@
 #include <linux/timer.h>
 #include <linux/stddef.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <asm/prom.h>
@@ -447,6 +446,7 @@
 
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(check_media_bay_by_base);
 
 int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
 			    int irq, ide_hwif_t *hwif)
@@ -486,6 +486,7 @@
 
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
 #endif /* CONFIG_BLK_DEV_IDE_PMAC */
 
 static void media_bay_step(int i)
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index f8a9f7a..1fb91ed 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -1479,6 +1479,7 @@
 		s += blocks;
 	}
 	bitmap->last_end_sync = jiffies;
+	sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed");
 }
 
 static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed)
@@ -1589,7 +1590,7 @@
 int bitmap_create(mddev_t *mddev)
 {
 	struct bitmap *bitmap;
-	unsigned long blocks = mddev->resync_max_sectors;
+	sector_t blocks = mddev->resync_max_sectors;
 	unsigned long chunks;
 	unsigned long pages;
 	struct file *file = mddev->bitmap_file;
@@ -1631,8 +1632,8 @@
 	bitmap->chunkshift = ffz(~bitmap->chunksize);
 
 	/* now that chunksize and chunkshift are set, we can use these macros */
- 	chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) /
-			CHUNK_BLOCK_RATIO(bitmap);
+ 	chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
+			CHUNK_BLOCK_SHIFT(bitmap);
  	pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
 
 	BUG_ON(!pages);
diff --git a/drivers/md/dm-bio-list.h b/drivers/md/dm-bio-list.h
deleted file mode 100644
index 345098b..0000000
--- a/drivers/md/dm-bio-list.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2004 Red Hat UK Ltd.
- *
- * This file is released under the GPL.
- */
-
-#ifndef DM_BIO_LIST_H
-#define DM_BIO_LIST_H
-
-#include <linux/bio.h>
-
-#ifdef CONFIG_BLOCK
-
-struct bio_list {
-	struct bio *head;
-	struct bio *tail;
-};
-
-static inline int bio_list_empty(const struct bio_list *bl)
-{
-	return bl->head == NULL;
-}
-
-static inline void bio_list_init(struct bio_list *bl)
-{
-	bl->head = bl->tail = NULL;
-}
-
-#define bio_list_for_each(bio, bl) \
-	for (bio = (bl)->head; bio; bio = bio->bi_next)
-
-static inline unsigned bio_list_size(const struct bio_list *bl)
-{
-	unsigned sz = 0;
-	struct bio *bio;
-
-	bio_list_for_each(bio, bl)
-		sz++;
-
-	return sz;
-}
-
-static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
-{
-	bio->bi_next = NULL;
-
-	if (bl->tail)
-		bl->tail->bi_next = bio;
-	else
-		bl->head = bio;
-
-	bl->tail = bio;
-}
-
-static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
-{
-	bio->bi_next = bl->head;
-
-	bl->head = bio;
-
-	if (!bl->tail)
-		bl->tail = bio;
-}
-
-static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
-{
-	if (!bl2->head)
-		return;
-
-	if (bl->tail)
-		bl->tail->bi_next = bl2->head;
-	else
-		bl->head = bl2->head;
-
-	bl->tail = bl2->tail;
-}
-
-static inline void bio_list_merge_head(struct bio_list *bl,
-				       struct bio_list *bl2)
-{
-	if (!bl2->head)
-		return;
-
-	if (bl->head)
-		bl2->tail->bi_next = bl->head;
-	else
-		bl->tail = bl2->tail;
-
-	bl->head = bl2->head;
-}
-
-static inline struct bio *bio_list_pop(struct bio_list *bl)
-{
-	struct bio *bio = bl->head;
-
-	if (bio) {
-		bl->head = bl->head->bi_next;
-		if (!bl->head)
-			bl->tail = NULL;
-
-		bio->bi_next = NULL;
-	}
-
-	return bio;
-}
-
-static inline struct bio *bio_list_get(struct bio_list *bl)
-{
-	struct bio *bio = bl->head;
-
-	bl->head = bl->tail = NULL;
-
-	return bio;
-}
-
-#endif /* CONFIG_BLOCK */
-#endif
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 59ee1b0..559dbb5 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -15,8 +15,6 @@
 
 #include <linux/device-mapper.h>
 
-#include "dm-bio-list.h"
-
 #define DM_MSG_PREFIX "delay"
 
 struct delay_c {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 095f77b..6a386ab 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -8,7 +8,6 @@
 #include <linux/device-mapper.h>
 
 #include "dm-path-selector.h"
-#include "dm-bio-list.h"
 #include "dm-bio-record.h"
 #include "dm-uevent.h"
 
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index 536ef0b..076fbb4 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -5,7 +5,6 @@
  * This file is released under the GPL.
  */
 
-#include "dm-bio-list.h"
 #include "dm-bio-record.h"
 
 #include <linux/init.h>
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index 59f8d9d..7b899be 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -14,7 +14,6 @@
 #include <linux/vmalloc.h>
 
 #include "dm.h"
-#include "dm-bio-list.h"
 
 #define	DM_MSG_PREFIX	"region hash"
 
diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index 981a041..d73f17f 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -22,7 +22,6 @@
 #include <linux/workqueue.h>
 
 #include "dm-exception-store.h"
-#include "dm-bio-list.h"
 
 #define DM_MSG_PREFIX "snapshots"
 
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 8a994be..424f7b0 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -6,7 +6,6 @@
  */
 
 #include "dm.h"
-#include "dm-bio-list.h"
 #include "dm-uevent.h"
 
 #include <linux/init.h>
diff --git a/drivers/md/md.c b/drivers/md/md.c
index ed5727c..612343f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2017,6 +2017,8 @@
 	clear_bit(MD_CHANGE_PENDING, &mddev->flags);
 	spin_unlock_irq(&mddev->write_lock);
 	wake_up(&mddev->sb_wait);
+	if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+		sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 
 }
 
@@ -2086,6 +2088,7 @@
 	 *  -writemostly - clears write_mostly
 	 *  blocked - sets the Blocked flag
 	 *  -blocked - clears the Blocked flag
+	 *  insync - sets Insync providing device isn't active
 	 */
 	int err = -EINVAL;
 	if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
@@ -2118,6 +2121,9 @@
 		md_wakeup_thread(rdev->mddev->thread);
 
 		err = 0;
+	} else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) {
+		set_bit(In_sync, &rdev->flags);
+		err = 0;
 	}
 	if (!err && rdev->sysfs_state)
 		sysfs_notify_dirent(rdev->sysfs_state);
@@ -2190,7 +2196,7 @@
 	} else if (rdev->mddev->pers) {
 		mdk_rdev_t *rdev2;
 		/* Activating a spare .. or possibly reactivating
-		 * if we every get bitmaps working here.
+		 * if we ever get bitmaps working here.
 		 */
 
 		if (rdev->raid_disk != -1)
@@ -3482,12 +3488,15 @@
 {
 	unsigned long max_sectors, resync;
 
+	if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+		return sprintf(page, "none\n");
+
 	if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
 		max_sectors = mddev->resync_max_sectors;
 	else
 		max_sectors = mddev->dev_sectors;
 
-	resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+	resync = mddev->curr_resync_completed;
 	return sprintf(page, "%lu / %lu\n", resync, max_sectors);
 }
 
@@ -6334,18 +6343,13 @@
 		sector_t sectors;
 
 		skipped = 0;
-		if (j >= mddev->resync_max) {
-			sysfs_notify(&mddev->kobj, NULL, "sync_completed");
-			wait_event(mddev->recovery_wait,
-				   mddev->resync_max > j
-				   || kthread_should_stop());
-		}
-		if (kthread_should_stop())
-			goto interrupted;
 
-		if (mddev->curr_resync > mddev->curr_resync_completed &&
-		    (mddev->curr_resync - mddev->curr_resync_completed)
-		    > (max_sectors >> 4)) {
+		if ((mddev->curr_resync > mddev->curr_resync_completed &&
+		     (mddev->curr_resync - mddev->curr_resync_completed)
+		    > (max_sectors >> 4)) ||
+		    (j - mddev->curr_resync_completed)*2
+		    >= mddev->resync_max - mddev->curr_resync_completed
+			) {
 			/* time to update curr_resync_completed */
 			blk_unplug(mddev->queue);
 			wait_event(mddev->recovery_wait,
@@ -6353,7 +6357,17 @@
 			mddev->curr_resync_completed =
 				mddev->curr_resync;
 			set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+			sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 		}
+
+		if (j >= mddev->resync_max)
+			wait_event(mddev->recovery_wait,
+				   mddev->resync_max > j
+				   || kthread_should_stop());
+
+		if (kthread_should_stop())
+			goto interrupted;
+
 		sectors = mddev->pers->sync_request(mddev, j, &skipped,
 						  currspeed < speed_min(mddev));
 		if (sectors == 0) {
@@ -6461,6 +6475,7 @@
 
  skip:
 	mddev->curr_resync = 0;
+	mddev->curr_resync_completed = 0;
 	mddev->resync_min = 0;
 	mddev->resync_max = MaxSector;
 	sysfs_notify(&mddev->kobj, NULL, "sync_completed");
diff --git a/drivers/md/md.h b/drivers/md/md.h
index e9b7f54..8227ab9 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -12,10 +12,17 @@
    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
 */
 
-#ifndef _MD_K_H
-#define _MD_K_H
+#ifndef _MD_MD_H
+#define _MD_MD_H
 
-#ifdef CONFIG_BLOCK
+#include <linux/blkdev.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
 
 #define MaxSector (~(sector_t)0)
 
@@ -408,10 +415,6 @@
 	if (p) put_page(p);
 }
 
-#endif /* CONFIG_BLOCK */
-#endif
-
-
 extern int register_md_personality(struct mdk_personality *p);
 extern int unregister_md_personality(struct mdk_personality *p);
 extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev),
@@ -434,3 +437,5 @@
 extern int md_allow_write(mddev_t *mddev);
 extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
 extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
+
+#endif /* _MD_MD_H */
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 274b491..36df910 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -35,7 +35,6 @@
 #include <linux/blkdev.h>
 #include <linux/seq_file.h>
 #include "md.h"
-#include "dm-bio-list.h"
 #include "raid1.h"
 #include "bitmap.h"
 
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e293d92..81a54f1 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -22,7 +22,6 @@
 #include <linux/blkdev.h>
 #include <linux/seq_file.h>
 #include "md.h"
-#include "dm-bio-list.h"
 #include "raid10.h"
 #include "bitmap.h"
 
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 3bbc6d6..4616bc3 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3845,6 +3845,7 @@
 		wait_event(conf->wait_for_overlap,
 			   atomic_read(&conf->reshape_stripes)==0);
 		mddev->reshape_position = conf->reshape_progress;
+		mddev->curr_resync_completed = mddev->curr_resync;
 		conf->reshape_checkpoint = jiffies;
 		set_bit(MD_CHANGE_DEVS, &mddev->flags);
 		md_wakeup_thread(mddev->thread);
@@ -3854,6 +3855,7 @@
 		conf->reshape_safe = mddev->reshape_position;
 		spin_unlock_irq(&conf->device_lock);
 		wake_up(&conf->wait_for_overlap);
+		sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 	}
 
 	if (mddev->delta_disks < 0) {
@@ -3938,11 +3940,13 @@
 	 * then we need to write out the superblock.
 	 */
 	sector_nr += reshape_sectors;
-	if (sector_nr >= mddev->resync_max) {
+	if ((sector_nr - mddev->curr_resync_completed) * 2
+	    >= mddev->resync_max - mddev->curr_resync_completed) {
 		/* Cannot proceed until we've updated the superblock... */
 		wait_event(conf->wait_for_overlap,
 			   atomic_read(&conf->reshape_stripes) == 0);
 		mddev->reshape_position = conf->reshape_progress;
+		mddev->curr_resync_completed = mddev->curr_resync;
 		conf->reshape_checkpoint = jiffies;
 		set_bit(MD_CHANGE_DEVS, &mddev->flags);
 		md_wakeup_thread(mddev->thread);
@@ -3953,6 +3957,7 @@
 		conf->reshape_safe = mddev->reshape_position;
 		spin_unlock_irq(&conf->device_lock);
 		wake_up(&conf->wait_for_overlap);
+		sysfs_notify(&mddev->kobj, NULL, "sync_completed");
 	}
 	return reshape_sectors;
 }
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 92c2977..bd945d0 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -1200,7 +1200,7 @@
 			video_unregister_device(radio->videodev);
 			kfree(radio->buffer);
 			kfree(radio);
-			goto unlock;
+			goto done;
 		}
 
 		/* stop rds reception */
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index d9d974a..add3395 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -1461,7 +1461,6 @@
 		return ret;
 	}
 
-	usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0);
 	usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
 
 	pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index f9fbe02..50b415e 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -159,35 +159,67 @@
 
 /****************************************************************************/
 
-
-#define SendControlMsg(request, value, buflen) \
-	usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
-		request, \
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
-		value, \
-		pdev->vcinterface, \
-		&buf, buflen, 500)
-
-#define RecvControlMsg(request, value, buflen) \
-	usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
-		request, \
-		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
-		value, \
-		pdev->vcinterface, \
-		&buf, buflen, 500)
-
-
-static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen)
+static int _send_control_msg(struct pwc_device *pdev,
+	u8 request, u16 value, int index, void *buf, int buflen, int timeout)
 {
-	return usb_control_msg(udev,
-		usb_sndctrlpipe(udev, 0),
-		SET_EP_STREAM_CTL,
+	int rc;
+	void *kbuf = NULL;
+
+	if (buflen) {
+		kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+		if (kbuf == NULL)
+			return -ENOMEM;
+		memcpy(kbuf, buf, buflen);
+	}
+
+	rc = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+		request,
 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		index,
+		kbuf, buflen, timeout);
+
+	kfree(kbuf);
+	return rc;
+}
+
+static int recv_control_msg(struct pwc_device *pdev,
+	u8 request, u16 value, void *buf, int buflen)
+{
+	int rc;
+	void *kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+
+	if (kbuf == NULL)
+		return -ENOMEM;
+
+	rc = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+		request,
+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		value,
+		pdev->vcinterface,
+		kbuf, buflen, 500);
+	memcpy(buf, kbuf, buflen);
+	kfree(kbuf);
+	return rc;
+}
+
+static inline int send_video_command(struct pwc_device *pdev,
+	int index, void *buf, int buflen)
+{
+	return _send_control_msg(pdev,
+		SET_EP_STREAM_CTL,
 		VIDEO_OUTPUT_CONTROL_FORMATTER,
 		index,
 		buf, buflen, 1000);
 }
 
+static inline int send_control_msg(struct pwc_device *pdev,
+	u8 request, u16 value, void *buf, int buflen)
+{
+	return _send_control_msg(pdev,
+		request, value, pdev->vcinterface, buf, buflen, 500);
+}
+
 
 
 static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
@@ -224,7 +256,7 @@
 		return -EINVAL;
 
 	memcpy(buf, pEntry->mode, 3);
-	ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
+	ret = send_video_command(pdev, pdev->vendpoint, buf, 3);
 	if (ret < 0) {
 		PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret);
 		return ret;
@@ -285,7 +317,7 @@
 	memcpy(buf, pChoose->mode, 13);
 	if (snapshot)
 		buf[0] |= 0x80;
-	ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13);
+	ret = send_video_command(pdev, pdev->vendpoint, buf, 13);
 	if (ret < 0)
 		return ret;
 
@@ -358,7 +390,7 @@
 		buf[0] |= 0x80;
 
 	/* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */
-	ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12);
+	ret = send_video_command(pdev, 4 /* pdev->vendpoint */, buf, 12);
 	if (ret < 0)
 		return ret;
 
@@ -530,7 +562,8 @@
 	char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return buf;
@@ -545,7 +578,8 @@
 	if (value > 0xffff)
 		value = 0xffff;
 	buf = (value >> 9) & 0x7f;
-	return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
 }
 
 /* CONTRAST */
@@ -555,7 +589,8 @@
 	char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return buf;
@@ -570,7 +605,8 @@
 	if (value > 0xffff)
 		value = 0xffff;
 	buf = (value >> 10) & 0x3f;
-	return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
 }
 
 /* GAMMA */
@@ -580,7 +616,8 @@
 	char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return buf;
@@ -595,7 +632,8 @@
 	if (value > 0xffff)
 		value = 0xffff;
 	buf = (value >> 11) & 0x1f;
-	return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
 }
 
 
@@ -613,7 +651,8 @@
 		saturation_register = SATURATION_MODE_FORMATTER2;
 	else
 		saturation_register = SATURATION_MODE_FORMATTER1;
-	ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = (signed)buf;
@@ -636,7 +675,8 @@
 		saturation_register = SATURATION_MODE_FORMATTER2;
 	else
 		saturation_register = SATURATION_MODE_FORMATTER1;
-	return SendControlMsg(SET_CHROM_CTL, saturation_register, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
 }
 
 /* AGC */
@@ -651,7 +691,8 @@
 	else
 		buf = 0xff; /* fixed */
 
-	ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (!mode && ret >= 0) {
 		if (value < 0)
@@ -659,7 +700,8 @@
 		if (value > 0xffff)
 			value = 0xffff;
 		buf = (value >> 10) & 0x3F;
-		ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+		ret = send_control_msg(pdev,
+			SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
 	}
 	if (ret < 0)
 		return ret;
@@ -671,12 +713,14 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
 	if (buf != 0) { /* fixed */
-		ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+		ret = recv_control_msg(pdev,
+			GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
 		if (ret < 0)
 			return ret;
 		if (buf > 0x3F)
@@ -684,7 +728,8 @@
 		*value = (buf << 10);
 	}
 	else { /* auto */
-		ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
+		ret = recv_control_msg(pdev,
+			GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf));
 		if (ret < 0)
 			return ret;
 		/* Gah... this value ranges from 0x00 ... 0x9F */
@@ -707,7 +752,8 @@
 	else
 		buf[0] = 0xff; /* fixed */
 
-	ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (!mode && ret >= 0) {
 		if (value < 0)
@@ -726,7 +772,9 @@
 			buf[0] = value >> 8;
 		}
 
-		ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
+		ret = send_control_msg(pdev,
+			SET_LUM_CTL, PRESET_SHUTTER_FORMATTER,
+			&buf, sizeof(buf));
 	}
 	return ret;
 }
@@ -737,7 +785,8 @@
 	unsigned char buf[2];
 	int ret;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf[0] + (buf[1] << 8);
@@ -764,7 +813,9 @@
 		buf = 0x00; /* active */
 	else
 		buf = 0xFF; /* power save */
-	return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 
@@ -773,20 +824,20 @@
 
 int pwc_restore_user(struct pwc_device *pdev)
 {
-	char buf; /* dummy */
-	return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0);
 }
 
 int pwc_save_user(struct pwc_device *pdev)
 {
-	char buf; /* dummy */
-	return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0);
 }
 
 int pwc_restore_factory(struct pwc_device *pdev)
 {
-	char buf; /* dummy */
-	return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0);
 }
 
  /* ************************************************* */
@@ -814,7 +865,8 @@
 
 	buf = mode & 0x07; /* just the lowest three bits */
 
-	ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (ret < 0)
 		return ret;
@@ -826,7 +878,8 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
 
 	if (ret < 0)
 		return ret;
@@ -843,7 +896,9 @@
 		value = 0xffff;
 	/* only the msb is considered */
 	buf = value >> 8;
-	return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_red_gain(struct pwc_device *pdev, int *value)
@@ -851,7 +906,9 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 	    return ret;
 	*value = buf << 8;
@@ -869,7 +926,9 @@
 		value = 0xffff;
 	/* only the msb is considered */
 	buf = value >> 8;
-	return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
@@ -877,7 +936,9 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 	    return ret;
 	*value = buf << 8;
@@ -894,7 +955,8 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf << 8;
@@ -906,7 +968,8 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf << 8;
@@ -920,7 +983,8 @@
 
 	/* useful range is 0x01..0x20 */
 	buf = speed / 0x7f0;
-	return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
 }
 
 static int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
@@ -928,7 +992,8 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf * 0x7f0;
@@ -942,7 +1007,8 @@
 
 	/* useful range is 0x01..0x3F */
 	buf = (delay >> 10);
-	return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
 }
 
 static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
@@ -950,7 +1016,8 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*value = buf << 10;
@@ -978,7 +1045,8 @@
 	buf[0] = on_value;
 	buf[1] = off_value;
 
-	return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
+	return send_control_msg(pdev,
+		SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
 }
 
 static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
@@ -992,7 +1060,8 @@
 		return 0;
 	}
 
-	ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*on_value = buf[0] * 100;
@@ -1009,7 +1078,8 @@
 		buf = 0xff; /* auto contour on */
 	else
 		buf = 0x0; /* auto contour off */
-	ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
@@ -1019,7 +1089,8 @@
 		contour = 0xffff;
 
 	buf = (contour >> 10); /* contour preset is [0..3f] */
-	ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+	ret = send_control_msg(pdev,
+		SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	return 0;
@@ -1030,13 +1101,16 @@
 	unsigned char buf;
 	int ret;
 
-	ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 
 	if (buf == 0) {
 		/* auto mode off, query current preset value */
-		ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+		ret = recv_control_msg(pdev,
+			GET_LUM_CTL, PRESET_CONTOUR_FORMATTER,
+			&buf, sizeof(buf));
 		if (ret < 0)
 			return ret;
 		*contour = buf << 10;
@@ -1055,7 +1129,9 @@
 		buf = 0xff;
 	else
 		buf = 0x0;
-	return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
@@ -1063,7 +1139,9 @@
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*backlight = !!buf;
@@ -1078,7 +1156,8 @@
 		buf = 0xff;
 	else
 		buf = 0x0;
-	return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
@@ -1086,7 +1165,8 @@
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*colour = !!buf;
@@ -1102,7 +1182,8 @@
 		buf = 0xff;
 	else
 		buf = 0x0;
-	return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
@@ -1110,7 +1191,8 @@
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*flicker = !!buf;
@@ -1126,7 +1208,9 @@
 	if (noise > 3)
 		noise = 3;
 	buf = noise;
-	return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+		&buf, sizeof(buf));
 }
 
 int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
@@ -1134,7 +1218,9 @@
 	int ret;
 	unsigned char buf;
 
-	ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+	ret = recv_control_msg(pdev,
+		GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+		&buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	*noise = buf;
@@ -1146,7 +1232,8 @@
 	unsigned char buf;
 
 	buf = flags & 0x03; // only lower two bits are currently used
-	return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
+	return send_control_msg(pdev,
+		SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_mpt_reset(struct pwc_device *pdev, int flags)
@@ -1175,7 +1262,8 @@
 	buf[1] = (pan >> 8) & 0xFF;
 	buf[2] = tilt & 0xFF;
 	buf[3] = (tilt >> 8) & 0xFF;
-	return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4);
+	return send_control_msg(pdev,
+		SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf));
 }
 
 int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
@@ -1211,7 +1299,8 @@
 	int ret;
 	unsigned char buf[5];
 
-	ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
+	ret = recv_control_msg(pdev,
+		GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	status->status = buf[0] & 0x7; // 3 bits are used for reporting
@@ -1233,7 +1322,8 @@
 	else
 		request = SENSOR_TYPE_FORMATTER2;
 
-	ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
+	ret = recv_control_msg(pdev,
+		GET_STATUS_CTL, request, &buf, sizeof(buf));
 	if (ret < 0)
 		return ret;
 	if (pdev->type < 675)
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index d0d126c..5d496a9 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -5934,7 +5934,7 @@
 
 	/* Initalize the timer
 	 */
-	init_timer(&pCfg->timer);
+	init_timer_on_stack(&pCfg->timer);
 	pCfg->timer.data = (unsigned long) ioc;
 	pCfg->timer.function = mpt_timer_expired;
 	pCfg->wait_done = 0;
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 3e6e42d..bbefe77 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -375,7 +375,7 @@
 	void *gru_start_vaddr;
 
 	if (!is_uv_system())
-		return -ENODEV;
+		return 0;
 
 #if defined CONFIG_IA64
 	gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 16f8dca..7896849 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -248,19 +248,19 @@
 	enum xp_retval ret;
 	int ch_number;
 
+	/* initialize the connection registration mutex */
+	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
+		mutex_init(&xpc_registrations[ch_number].mutex);
+
 	if (is_shub())
 		ret = xp_init_sn2();
 	else if (is_uv())
 		ret = xp_init_uv();
 	else
-		ret = xpUnsupported;
+		ret = 0;
 
 	if (ret != xpSuccess)
-		return -ENODEV;
-
-	/* initialize the connection registration mutex */
-	for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
-		mutex_init(&xpc_registrations[ch_number].mutex);
+		return ret;
 
 	return 0;
 }
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 7c5b257..29acd06 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -332,7 +332,7 @@
 		cafe->ctl1 &= ~CTRL1_CHIPSELECT;
 }
 
-static int cafe_nand_interrupt(int irq, void *id)
+static irqreturn_t cafe_nand_interrupt(int irq, void *id)
 {
 	struct mtd_info *mtd = id;
 	struct cafe_priv *cafe = mtd->priv;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 29df398..1fc4543 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -1383,6 +1383,11 @@
 	RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
 	RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
 
+	tp->cur_rx = 0;
+
+	/* init Rx ring buffer DMA address */
+	RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
 	/* Must enable Tx/Rx before setting transfer thresholds! */
 	RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
 
@@ -1390,8 +1395,6 @@
 	RTL_W32 (RxConfig, tp->rx_config);
 	RTL_W32 (TxConfig, rtl8139_tx_config);
 
-	tp->cur_rx = 0;
-
 	rtl_check_media (dev, 1);
 
 	if (tp->chipset >= CH_8139B) {
@@ -1406,9 +1409,6 @@
 	/* Lock Config[01234] and BMCR register writes */
 	RTL_W8 (Cfg9346, Cfg9346_Lock);
 
-	/* init Rx ring buffer DMA address */
-	RTL_W32_F (RxBuf, tp->rx_ring_dma);
-
 	/* init Tx buffer DMA addresses */
 	for (i = 0; i < NUM_TX_DESC; i++)
 		RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9e92154..214a92d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -28,9 +28,9 @@
 
 config COMPAT_NET_DEV_OPS
        default y
-       bool "Enable older network device API compatiablity"
+       bool "Enable older network device API compatibility"
        ---help---
-          This option enables kernel compatiability with older network devices
+          This option enables kernel compatibility with older network devices
           that do not use net_device_ops interface.
 
 	  If unsure, say Y.
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index d0d0c2f..02f64d5 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -692,6 +692,17 @@
 	.remove		= __devexit_p(a2065_remove_one),
 };
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open		= lance_open,
+	.ndo_stop		= lance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_tx_timeout		= lance_tx_timeout,
+	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __devinit a2065_init_one(struct zorro_dev *z,
 				    const struct zorro_device_id *ent)
 {
@@ -753,12 +764,8 @@
 	priv->rx_ring_mod_mask = RX_RING_MOD_MASK;
 	priv->tx_ring_mod_mask = TX_RING_MOD_MASK;
 
-	dev->open = &lance_open;
-	dev->stop = &lance_close;
-	dev->hard_start_xmit = &lance_start_xmit;
-	dev->tx_timeout = &lance_tx_timeout;
+	dev->netdev_ops = &lance_netdev_ops;
 	dev->watchdog_timeo = 5*HZ;
-	dev->set_multicast_list = &lance_set_multicast;
 	dev->dma = 0;
 
 	init_timer(&priv->multicast_timer);
diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c
index e1d72e0..58e8d52 100644
--- a/drivers/net/ariadne.c
+++ b/drivers/net/ariadne.c
@@ -155,6 +155,18 @@
     .remove	= __devexit_p(ariadne_remove_one),
 };
 
+static const struct net_device_ops ariadne_netdev_ops = {
+	.ndo_open		= ariadne_open,
+	.ndo_stop		= ariadne_close,
+	.ndo_start_xmit		= ariadne_start_xmit,
+	.ndo_tx_timeout		= ariadne_tx_timeout,
+	.ndo_get_stats		= ariadne_get_stats,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __devinit ariadne_init_one(struct zorro_dev *z,
 				      const struct zorro_device_id *ent)
 {
@@ -197,13 +209,8 @@
     dev->mem_start = ZTWO_VADDR(mem_start);
     dev->mem_end = dev->mem_start+ARIADNE_RAM_SIZE;
 
-    dev->open = &ariadne_open;
-    dev->stop = &ariadne_close;
-    dev->hard_start_xmit = &ariadne_start_xmit;
-    dev->tx_timeout = &ariadne_tx_timeout;
+    dev->netdev_ops = &ariadne_netdev_ops;
     dev->watchdog_timeo = 5*HZ;
-    dev->get_stats = &ariadne_get_stats;
-    dev->set_multicast_list = &set_multicast_list;
 
     err = register_netdev(dev);
     if (err) {
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 4bc6901..627bc75 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -665,6 +665,20 @@
 	if (net_debug && version_printed++ == 0)
 		printk(KERN_INFO "%s", version);
 }
+static const struct net_device_ops am79c961_netdev_ops = {
+	.ndo_open		= am79c961_open,
+	.ndo_stop		= am79c961_close,
+	.ndo_start_xmit		= am79c961_sendpacket,
+	.ndo_get_stats		= am79c961_getstats,
+	.ndo_set_multicast_list	= am79c961_setmulticastlist,
+	.ndo_tx_timeout		= am79c961_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= am79c961_poll_controller,
+#endif
+};
 
 static int __init am79c961_probe(struct platform_device *pdev)
 {
@@ -732,15 +746,7 @@
 	if (am79c961_hw_init(dev))
 		goto release;
 
-	dev->open		= am79c961_open;
-	dev->stop		= am79c961_close;
-	dev->hard_start_xmit	= am79c961_sendpacket;
-	dev->get_stats		= am79c961_getstats;
-	dev->set_multicast_list	= am79c961_setmulticastlist;
-	dev->tx_timeout		= am79c961_timeout;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller	= am79c961_poll_controller;
-#endif
+	dev->netdev_ops = &am79c961_netdev_ops;
 
 	ret = register_netdev(dev);
 	if (ret == 0) {
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 442938d..7f4bc8a 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -577,7 +577,7 @@
 /*
  * Enable/Disable promiscuous and multicast modes.
  */
-static void at91ether_set_rx_mode(struct net_device *dev)
+static void at91ether_set_multicast_list(struct net_device *dev)
 {
 	unsigned long cfg;
 
@@ -808,7 +808,7 @@
 /*
  * Transmit packet.
  */
-static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
+static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct at91_private *lp = netdev_priv(dev);
 
@@ -828,7 +828,7 @@
 
 		dev->trans_start = jiffies;
 	} else {
-		printk(KERN_ERR "at91_ether.c: at91ether_tx() called, but device is busy!\n");
+		printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
 		return 1;	/* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
 				on this skb, he also reports -ENETDOWN and printk's, so either
 				we free and return(0) or don't free and return 1 */
@@ -965,6 +965,21 @@
 }
 #endif
 
+static const struct net_device_ops at91ether_netdev_ops = {
+	.ndo_open		= at91ether_open,
+	.ndo_stop		= at91ether_close,
+	.ndo_start_xmit		= at91ether_start_xmit,
+	.ndo_get_stats		= at91ether_stats,
+	.ndo_set_multicast_list	= at91ether_set_multicast_list,
+	.ndo_set_mac_address	= set_mac_address,
+	.ndo_do_ioctl		= at91ether_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= at91ether_poll_controller,
+#endif
+};
+
 /*
  * Initialize the ethernet interface
  */
@@ -1005,17 +1020,8 @@
 	spin_lock_init(&lp->lock);
 
 	ether_setup(dev);
-	dev->open = at91ether_open;
-	dev->stop = at91ether_close;
-	dev->hard_start_xmit = at91ether_tx;
-	dev->get_stats = at91ether_stats;
-	dev->set_multicast_list = at91ether_set_rx_mode;
-	dev->set_mac_address = set_mac_address;
+	dev->netdev_ops = &at91ether_netdev_ops;
 	dev->ethtool_ops = &at91ether_ethtool_ops;
-	dev->do_ioctl = at91ether_ioctl;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = at91ether_poll_controller;
-#endif
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index cc77087..b72b3d6 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -153,7 +153,7 @@
 struct ep93xx_priv
 {
 	struct resource		*res;
-	void			*base_addr;
+	void __iomem		*base_addr;
 	int			irq;
 
 	struct ep93xx_descs	*descs;
@@ -770,7 +770,18 @@
 	.get_link		= ep93xx_get_link,
 };
 
-struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data)
+static const struct net_device_ops ep93xx_netdev_ops = {
+	.ndo_open		= ep93xx_open,
+	.ndo_stop		= ep93xx_close,
+	.ndo_start_xmit		= ep93xx_xmit,
+	.ndo_get_stats		= ep93xx_get_stats,
+	.ndo_do_ioctl		= ep93xx_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+static struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data)
 {
 	struct net_device *dev;
 
@@ -780,12 +791,8 @@
 
 	memcpy(dev->dev_addr, data->dev_addr, ETH_ALEN);
 
-	dev->get_stats = ep93xx_get_stats;
 	dev->ethtool_ops = &ep93xx_ethtool_ops;
-	dev->hard_start_xmit = ep93xx_xmit;
-	dev->open = ep93xx_open;
-	dev->stop = ep93xx_close;
-	dev->do_ioctl = ep93xx_ioctl;
+	dev->netdev_ops = &ep93xx_netdev_ops;
 
 	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
 
diff --git a/drivers/net/arm/ether1.c b/drivers/net/arm/ether1.c
index e380de4..edf770f 100644
--- a/drivers/net/arm/ether1.c
+++ b/drivers/net/arm/ether1.c
@@ -991,6 +991,18 @@
 		printk(KERN_INFO "%s", version);
 }
 
+static const struct net_device_ops ether1_netdev_ops = {
+	.ndo_open		= ether1_open,
+	.ndo_stop		= ether1_close,
+	.ndo_start_xmit		= ether1_sendpacket,
+	.ndo_get_stats		= ether1_getstats,
+	.ndo_set_multicast_list	= ether1_setmulticastlist,
+	.ndo_tx_timeout		= ether1_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __devinit
 ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
@@ -1031,12 +1043,7 @@
 		goto free;
 	}
 
-	dev->open		= ether1_open;
-	dev->stop		= ether1_close;
-	dev->hard_start_xmit    = ether1_sendpacket;
-	dev->get_stats		= ether1_getstats;
-	dev->set_multicast_list = ether1_setmulticastlist;
-	dev->tx_timeout		= ether1_timeout;
+	dev->netdev_ops		= &ether1_netdev_ops;
 	dev->watchdog_timeo	= 5 * HZ / 100;
 
 	ret = register_netdev(dev);
diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c
index 21a7bef..ec8a1ae 100644
--- a/drivers/net/arm/ether3.c
+++ b/drivers/net/arm/ether3.c
@@ -770,6 +770,18 @@
 		printk(KERN_INFO "%s", version);
 }
 
+static const struct net_device_ops ether3_netdev_ops = {
+	.ndo_open		= ether3_open,
+	.ndo_stop		= ether3_close,
+	.ndo_start_xmit		= ether3_sendpacket,
+	.ndo_get_stats		= ether3_getstats,
+	.ndo_set_multicast_list	= ether3_setmulticastlist,
+	.ndo_tx_timeout		= ether3_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __devinit
 ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
 {
@@ -846,12 +858,7 @@
 		goto free;
 	}
 
-	dev->open		= ether3_open;
-	dev->stop		= ether3_close;
-	dev->hard_start_xmit	= ether3_sendpacket;
-	dev->get_stats		= ether3_getstats;
-	dev->set_multicast_list	= ether3_setmulticastlist;
-	dev->tx_timeout		= ether3_timeout;
+	dev->netdev_ops		= &ether3_netdev_ops;
 	dev->watchdog_timeo	= 5 * HZ / 100;
 
 	ret = register_netdev(dev);
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index 2d81f6a..5425ab0 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -453,6 +453,16 @@
 	return( ret );
 }
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open		= lance_open,
+	.ndo_stop		= lance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_mac_address	= lance_set_mac_address,
+	.ndo_tx_timeout		= lance_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
 
 static unsigned long __init lance_probe1( struct net_device *dev,
 					   struct lance_addr *init_rec )
@@ -623,15 +633,9 @@
 	if (did_version++ == 0)
 		DPRINTK( 1, ( version ));
 
-	/* The LANCE-specific entries in the device structure. */
-	dev->open = &lance_open;
-	dev->hard_start_xmit = &lance_start_xmit;
-	dev->stop = &lance_close;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->set_mac_address = &lance_set_mac_address;
+	dev->netdev_ops = &lance_netdev_ops;
 
 	/* XXX MSch */
-	dev->tx_timeout = lance_tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	return( 1 );
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 4274e4a..d58c105 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1004,12 +1004,12 @@
 	netif_wake_queue(dev);
 }
 
-static void set_rx_mode(struct net_device *dev)
+static void au1000_multicast_list(struct net_device *dev)
 {
 	struct au1000_private *aup = netdev_priv(dev);
 
 	if (au1000_debug > 4)
-		printk("%s: set_rx_mode: flags=%x\n", dev->name, dev->flags);
+		printk("%s: au1000_multicast_list: flags=%x\n", dev->name, dev->flags);
 
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		aup->mac->control |= MAC_PROMISCUOUS;
@@ -1047,6 +1047,18 @@
 	return phy_mii_ioctl(aup->phy_dev, if_mii(rq), cmd);
 }
 
+static const struct net_device_ops au1000_netdev_ops = {
+	.ndo_open		= au1000_open,
+	.ndo_stop		= au1000_close,
+	.ndo_start_xmit		= au1000_tx,
+	.ndo_set_multicast_list	= au1000_multicast_list,
+	.ndo_do_ioctl		= au1000_ioctl,
+	.ndo_tx_timeout		= au1000_tx_timeout,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static struct net_device * au1000_probe(int port_num)
 {
 	static unsigned version_printed = 0;
@@ -1197,13 +1209,8 @@
 
 	dev->base_addr = base;
 	dev->irq = irq;
-	dev->open = au1000_open;
-	dev->hard_start_xmit = au1000_tx;
-	dev->stop = au1000_close;
-	dev->set_multicast_list = &set_rx_mode;
-	dev->do_ioctl = &au1000_ioctl;
+	dev->netdev_ops = &au1000_netdev_ops;
 	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
-	dev->tx_timeout = au1000_tx_timeout;
 	dev->watchdog_timeo = ETH_TX_TIMEOUT;
 
 	/*
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 04f4b73..9592f22 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -319,7 +319,7 @@
 
 	be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause,
 		&ecmd->rx_pause);
-	ecmd->autoneg = AUTONEG_ENABLE;
+	ecmd->autoneg = 0;
 }
 
 static int
@@ -328,7 +328,7 @@
 	struct be_adapter *adapter = netdev_priv(netdev);
 	int status;
 
-	if (ecmd->autoneg != AUTONEG_ENABLE)
+	if (ecmd->autoneg != 0)
 		return -EINVAL;
 
 	status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause,
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 9afe809..9f971ed 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -979,6 +979,20 @@
 	return 0;
 }
 
+static const struct net_device_ops bfin_mac_netdev_ops = {
+	.ndo_open		= bfin_mac_open,
+	.ndo_stop		= bfin_mac_close,
+	.ndo_start_xmit		= bfin_mac_hard_start_xmit,
+	.ndo_set_mac_address	= bfin_mac_set_mac_address,
+	.ndo_tx_timeout		= bfin_mac_timeout,
+	.ndo_set_multicast_list	= bfin_mac_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= bfin_mac_poll,
+#endif
+};
+
 /*
  *
  * this makes the board clean up everything that it can
@@ -1086,15 +1100,7 @@
 	/* Fill in the fields of the device structure with ethernet values. */
 	ether_setup(ndev);
 
-	ndev->open = bfin_mac_open;
-	ndev->stop = bfin_mac_close;
-	ndev->hard_start_xmit = bfin_mac_hard_start_xmit;
-	ndev->set_mac_address = bfin_mac_set_mac_address;
-	ndev->tx_timeout = bfin_mac_timeout;
-	ndev->set_multicast_list = bfin_mac_set_multicast_list;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller = bfin_mac_poll;
-#endif
+	ndev->netdev_ops = &bfin_mac_netdev_ops;
 	ndev->ethtool_ops = &bfin_mac_ethtool_ops;
 
 	spin_lock_init(&lp->lock);
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 8dc6fbb..553a899 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -370,8 +370,6 @@
 
 	if (arp->op_code == htons(ARPOP_REPLY)) {
 		/* update rx hash table for this ARP */
-		printk("rar: update orig %s bond_dev %s\n", orig_dev->name,
-		       bond_dev->name);
 		bond = netdev_priv(bond_dev);
 		rlb_update_entry_from_arp(bond, arp);
 		pr_debug("Server received an ARP Reply from client\n");
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 99610f3..63369b6 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2570,7 +2570,7 @@
 
 	for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
 		if (!targets[i])
-			continue;
+			break;
 		pr_debug("basa: target %x\n", targets[i]);
 		if (list_empty(&bond->vlan_list)) {
 			pr_debug("basa: empty vlan: arp_send\n");
@@ -2677,7 +2677,6 @@
 	int i;
 	__be32 *targets = bond->params.arp_targets;
 
-	targets = bond->params.arp_targets;
 	for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
 		pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
 			&sip, &tip, i, &targets[i], bond_has_this_ip(bond, tip));
@@ -3303,7 +3302,7 @@
 
 		for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
 			if (!bond->params.arp_targets[i])
-				continue;
+				break;
 			if (printed)
 				seq_printf(seq, ",");
 			seq_printf(seq, " %pI4", &bond->params.arp_targets[i]);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 18cf478..d287315 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -684,17 +684,15 @@
 			goto out;
 		}
 		/* look for an empty slot to put the target in, and check for dupes */
-		for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
 			if (targets[i] == newtarget) { /* duplicate */
 				printk(KERN_ERR DRV_NAME
 				       ": %s: ARP target %pI4 is already present\n",
 				       bond->dev->name, &newtarget);
-				if (done)
-					targets[i] = 0;
 				ret = -EINVAL;
 				goto out;
 			}
-			if (targets[i] == 0 && !done) {
+			if (targets[i] == 0) {
 				printk(KERN_INFO DRV_NAME
 				       ": %s: adding ARP target %pI4.\n",
 				       bond->dev->name, &newtarget);
@@ -720,12 +718,16 @@
 			goto out;
 		}
 
-		for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+		for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
 			if (targets[i] == newtarget) {
+				int j;
 				printk(KERN_INFO DRV_NAME
 				       ": %s: removing ARP target %pI4.\n",
 				       bond->dev->name, &newtarget);
-				targets[i] = 0;
+				for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
+					targets[j] = targets[j+1];
+
+				targets[j] = 0;
 				done = 1;
 			}
 		}
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index c9806c5..7a18dc7 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -257,6 +257,23 @@
 
 struct transceiver_ops* transceiver = &transceivers[0];
 
+static const struct net_device_ops e100_netdev_ops = {
+	.ndo_open		= e100_open,
+	.ndo_stop		= e100_close,
+	.ndo_start_xmit		= e100_send_packet,
+	.ndo_tx_timeout		= e100_tx_timeout,
+	.ndo_get_stats		= e100_get_stats,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_do_ioctl		= e100_ioctl,
+	.ndo_set_mac_address	= e100_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_config		= e100_set_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= e100_netpoll,
+#endif
+};
+
 #define tx_done(dev) (*R_DMA_CH0_CMD == 0)
 
 /*
@@ -300,19 +317,8 @@
 
 	/* fill in our handlers so the network layer can talk to us in the future */
 
-	dev->open               = e100_open;
-	dev->hard_start_xmit    = e100_send_packet;
-	dev->stop               = e100_close;
-	dev->get_stats          = e100_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-	dev->set_mac_address    = e100_set_mac_address;
 	dev->ethtool_ops	= &e100_ethtool_ops;
-	dev->do_ioctl           = e100_ioctl;
-	dev->set_config		= e100_set_config;
-	dev->tx_timeout         = e100_tx_timeout;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = e100_netpoll;
-#endif
+	dev->netdev_ops		= &e100_netdev_ops;
 
 	spin_lock_init(&np->lock);
 	spin_lock_init(&np->led_lock);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index ab0e5fe..7ea4841 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1117,8 +1117,8 @@
 	spin_unlock_irq(&adapter->work_lock);
 
 	free_irq_resources(adapter);
-	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */
 	quiesce_rx(adapter);
+	flush_workqueue(cxgb3_wq);	/* wait for external IRQ handler */
 }
 
 static void schedule_chk_task(struct adapter *adap)
@@ -1187,6 +1187,9 @@
 
 	sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group);
 
+	/* Flush work scheduled while releasing TIDs */
+	flush_scheduled_work();
+
 	tdev->lldev = NULL;
 	cxgb3_set_dummy_ops(tdev);
 	t3_tp_set_offload_mode(adapter, 0);
@@ -1232,6 +1235,10 @@
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
 
+	
+	if (!adapter->open_device_map)
+		return 0;
+
 	/* Stop link fault interrupts */
 	t3_xgm_intr_disable(adapter, pi->port_id);
 	t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset);
@@ -1247,8 +1254,7 @@
 	spin_unlock_irq(&adapter->work_lock);
 
 	if (!(adapter->open_device_map & PORT_MASK))
-		cancel_rearming_delayed_workqueue(cxgb3_wq,
-						  &adapter->adap_check_task);
+		cancel_delayed_work_sync(&adapter->adap_check_task);
 
 	if (!adapter->open_device_map)
 		cxgb_down(adapter);
@@ -2493,6 +2499,7 @@
 
 		spin_lock_irq(&adapter->work_lock);
 		if (p->link_fault) {
+			t3_link_fault(adapter, i);
 			spin_unlock_irq(&adapter->work_lock);
 			continue;
 		}
@@ -2554,9 +2561,7 @@
 
 	adapter->check_task_cnt++;
 
-	/* Check link status for PHYs without interrupts */
-	if (p->linkpoll_period)
-		check_link_status(adapter);
+	check_link_status(adapter);
 
 	/* Accumulate MAC stats if needed */
 	if (!p->linkpoll_period ||
@@ -2680,21 +2685,6 @@
 	spin_unlock(&adapter->work_lock);
 }
 
-static void link_fault_task(struct work_struct *work)
-{
-	struct adapter *adapter = container_of(work, struct adapter,
-					       link_fault_handler_task);
-	int i;
-
-	for_each_port(adapter, i) {
-		struct net_device *netdev = adapter->port[i];
-		struct port_info *pi = netdev_priv(netdev);
-
-		if (pi->link_fault)
-			t3_link_fault(adapter, i);
-	}
-}
-
 void t3_os_link_fault_handler(struct adapter *adapter, int port_id)
 {
 	struct net_device *netdev = adapter->port[port_id];
@@ -2702,7 +2692,6 @@
 
 	spin_lock(&adapter->work_lock);
 	pi->link_fault = 1;
-	queue_work(cxgb3_wq, &adapter->link_fault_handler_task);
 	spin_unlock(&adapter->work_lock);
 }
 
@@ -2838,6 +2827,9 @@
 	struct adapter *adapter = pci_get_drvdata(pdev);
 	int ret;
 
+	if (state == pci_channel_io_perm_failure)
+		return PCI_ERS_RESULT_DISCONNECT;
+
 	ret = t3_adapter_error(adapter, 0);
 
 	/* Request a slot reset. */
@@ -2932,8 +2924,13 @@
 	while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
 		vectors = err;
 
-	if (!err && vectors < (adap->params.nports + 1))
+	if (err < 0)
+		pci_disable_msix(adap->pdev);
+
+	if (!err && vectors < (adap->params.nports + 1)) {
+		pci_disable_msix(adap->pdev);
 		err = -1;
+	}
 
 	if (!err) {
 		for (i = 0; i < vectors; ++i)
@@ -3082,7 +3079,6 @@
 
 	INIT_LIST_HEAD(&adapter->adapter_list);
 	INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task);
-	INIT_WORK(&adapter->link_fault_handler_task, link_fault_task);
 	INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task);
 	INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task);
 
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 31ed31a..e1bd690 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1202,7 +1202,6 @@
 	struct cphy *phy = &pi->phy;
 	struct cmac *mac = &pi->mac;
 	struct link_config *lc = &pi->link_config;
-	int force_link_down = 0;
 
 	phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
 
@@ -1218,14 +1217,9 @@
 		status = t3_read_reg(adapter, A_XGM_INT_STATUS + mac->offset);
 		if (status & F_LINKFAULTCHANGE) {
 			mac->stats.link_faults++;
-			force_link_down = 1;
+			pi->link_fault = 1;
 		}
 		t3_open_rx_traffic(mac, rx_cfg, rx_hash_high, rx_hash_low);
-
-		if (force_link_down) {
-			t3_os_link_fault_handler(adapter, port_id);
-			return;
-		}
 	}
 
 	if (lc->requested_fc & PAUSE_AUTONEG)
@@ -1292,9 +1286,6 @@
 		/* Account link faults only when the phy reports a link up */
 		if (link_ok)
 			mac->stats.link_faults++;
-
-		msleep(1000);
-		t3_os_link_fault_handler(adapter, port_id);
 	} else {
 		if (link_ok)
 			t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset,
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index 861c867..b62405a 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -1010,6 +1010,17 @@
 	lance_set_multicast(dev);
 }
 
+static const struct net_device_ops lance_netdev_ops = {
+	.ndo_open		= lance_open,
+	.ndo_stop		= lance_close,
+	.ndo_start_xmit		= lance_start_xmit,
+	.ndo_tx_timeout		= lance_tx_timeout,
+	.ndo_set_multicast_list	= lance_set_multicast,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init dec_lance_probe(struct device *bdev, const int type)
 {
 	static unsigned version_printed;
@@ -1223,12 +1234,8 @@
 
 	printk(", addr = %pM, irq = %d\n", dev->dev_addr, dev->irq);
 
-	dev->open = &lance_open;
-	dev->stop = &lance_close;
-	dev->hard_start_xmit = &lance_start_xmit;
-	dev->tx_timeout = &lance_tx_timeout;
+	dev->netdev_ops = &lance_netdev_ops;
 	dev->watchdog_timeo = 5*HZ;
-	dev->set_multicast_list = &lance_set_multicast;
 
 	/* lp->ll is the location of the registers for lance card */
 	lp->ll = ll;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index ddc5c53..6a46cee 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -156,8 +156,8 @@
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 #ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 static int e1000_resume(struct pci_dev *pdev);
 #endif
 static void e1000_shutdown(struct pci_dev *pdev);
@@ -3834,7 +3834,6 @@
 	struct e1000_buffer *buffer_info;
 	unsigned int i, eop;
 	unsigned int count = 0;
-	bool cleaned;
 	unsigned int total_tx_bytes=0, total_tx_packets=0;
 
 	i = tx_ring->next_to_clean;
@@ -3843,7 +3842,8 @@
 
 	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
-		for (cleaned = false; !cleaned; count++) {
+		bool cleaned = false;
+		for ( ; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
 			cleaned = (i == eop);
@@ -3871,7 +3871,7 @@
 	tx_ring->next_to_clean = i;
 
 #define TX_WAKE_THRESHOLD 32
-	if (unlikely(cleaned && netif_carrier_ok(netdev) &&
+	if (unlikely(count && netif_carrier_ok(netdev) &&
 		     E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
 		/* Make sure that anybody stopping the queue after this
 		 * sees the new next_to_clean.
@@ -4601,7 +4601,7 @@
 	return 0;
 }
 
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -4664,22 +4664,18 @@
 
 		ew32(WUC, E1000_WUC_PME_EN);
 		ew32(WUFC, wufc);
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
 	} else {
 		ew32(WUC, 0);
 		ew32(WUFC, 0);
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
 	e1000_release_manageability(adapter);
 
+	*enable_wake = !!wufc;
+
 	/* make sure adapter isn't asleep if manageability is enabled */
-	if (adapter->en_mng_pt) {
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
-	}
+	if (adapter->en_mng_pt)
+		*enable_wake = true;
 
 	if (hw->phy_type == e1000_phy_igp_3)
 		e1000_phy_powerdown_workaround(hw);
@@ -4693,12 +4689,29 @@
 
 	pci_disable_device(pdev);
 
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
 	return 0;
 }
 
 #ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int retval;
+	bool wake;
+
+	retval = __e1000_shutdown(pdev, &wake);
+	if (retval)
+		return retval;
+
+	if (wake) {
+		pci_prepare_to_sleep(pdev);
+	} else {
+		pci_wake_from_d3(pdev, false);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+
+	return 0;
+}
+
 static int e1000_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4753,7 +4766,14 @@
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
-	e1000_suspend(pdev, PMSG_SUSPEND);
+	bool wake;
+
+	__e1000_shutdown(pdev, &wake);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, wake);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 409b58c..ca82f19 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -621,7 +621,6 @@
 	struct e1000_buffer *buffer_info;
 	unsigned int i, eop;
 	unsigned int count = 0;
-	bool cleaned;
 	unsigned int total_tx_bytes = 0, total_tx_packets = 0;
 
 	i = tx_ring->next_to_clean;
@@ -630,7 +629,8 @@
 
 	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
-		for (cleaned = 0; !cleaned; count++) {
+		bool cleaned = false;
+		for (; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
 			cleaned = (i == eop);
@@ -661,8 +661,8 @@
 	tx_ring->next_to_clean = i;
 
 #define TX_WAKE_THRESHOLD 32
-	if (cleaned && netif_carrier_ok(netdev) &&
-		     e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
+	if (count && netif_carrier_ok(netdev) &&
+	    e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
 		/* Make sure that anybody stopping the queue after this
 		 * sees the new next_to_clean.
 		 */
@@ -4346,7 +4346,7 @@
 	}
 }
 
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -4409,20 +4409,16 @@
 
 		ew32(WUC, E1000_WUC_PME_EN);
 		ew32(WUFC, wufc);
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
 	} else {
 		ew32(WUC, 0);
 		ew32(WUFC, 0);
-		pci_enable_wake(pdev, PCI_D3hot, 0);
-		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
+	*enable_wake = !!wufc;
+
 	/* make sure adapter isn't asleep if manageability is enabled */
-	if (adapter->flags & FLAG_MNG_PT_ENABLED) {
-		pci_enable_wake(pdev, PCI_D3hot, 1);
-		pci_enable_wake(pdev, PCI_D3cold, 1);
-	}
+	if (adapter->flags & FLAG_MNG_PT_ENABLED)
+		*enable_wake = true;
 
 	if (adapter->hw.phy.type == e1000_phy_igp_3)
 		e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
@@ -4435,6 +4431,26 @@
 
 	pci_disable_device(pdev);
 
+	return 0;
+}
+
+static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
+{
+	if (sleep && wake) {
+		pci_prepare_to_sleep(pdev);
+		return;
+	}
+
+	pci_wake_from_d3(pdev, wake);
+	pci_set_power_state(pdev, PCI_D3hot);
+}
+
+static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
+                                    bool wake)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+
 	/*
 	 * The pci-e switch on some quad port adapters will report a
 	 * correctable error when the MAC transitions from D0 to D3.  To
@@ -4450,14 +4466,12 @@
 		pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
 		                      (devctl & ~PCI_EXP_DEVCTL_CERE));
 
-		pci_set_power_state(pdev, pci_choose_state(pdev, state));
+		e1000_power_off(pdev, sleep, wake);
 
 		pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
 	} else {
-		pci_set_power_state(pdev, pci_choose_state(pdev, state));
+		e1000_power_off(pdev, sleep, wake);
 	}
-
-	return 0;
 }
 
 static void e1000e_disable_l1aspm(struct pci_dev *pdev)
@@ -4486,6 +4500,18 @@
 }
 
 #ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int retval;
+	bool wake;
+
+	retval = __e1000_shutdown(pdev, &wake);
+	if (!retval)
+		e1000_complete_shutdown(pdev, true, wake);
+
+	return retval;
+}
+
 static int e1000_resume(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4549,7 +4575,12 @@
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
-	e1000_suspend(pdev, PMSG_SUSPEND);
+	bool wake = false;
+
+	__e1000_shutdown(pdev, &wake);
+
+	if (system_state == SYSTEM_POWER_OFF)
+		e1000_complete_shutdown(pdev, false, wake);
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index ac0c5b4..604c844 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3080,7 +3080,8 @@
 	.ndo_change_mtu		= ehea_change_mtu,
 	.ndo_vlan_rx_register	= ehea_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= ehea_vlan_rx_add_vid,
-	.ndo_vlan_rx_kill_vid	= ehea_vlan_rx_kill_vid
+	.ndo_vlan_rx_kill_vid	= ehea_vlan_rx_kill_vid,
+	.ndo_tx_timeout		= ehea_tx_watchdog,
 };
 
 struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
@@ -3142,7 +3143,6 @@
 		      | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX
 		      | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER
 		      | NETIF_F_LLTX;
-	dev->tx_timeout = &ehea_tx_watchdog;
 	dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
 
 	INIT_WORK(&port->reset_task, ehea_reset_port);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index d374650..11d5db1 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3745,14 +3745,14 @@
 			mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 		}
 		spin_unlock_irqrestore(&np->lock, flags);
-		__napi_complete(napi);
+		napi_complete(napi);
 		return rx_work;
 	}
 
 	if (rx_work < budget) {
 		/* re-enable interrupts
 		   (msix not enabled in napi) */
-		__napi_complete(napi);
+		napi_complete(napi);
 
 		writel(np->irqmask, base + NvRegIrqMask);
 	}
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index b037ce9..a9cbc31 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1019,6 +1019,22 @@
 #define IS_FEC(match) 0
 #endif
 
+static const struct net_device_ops fs_enet_netdev_ops = {
+	.ndo_open		= fs_enet_open,
+	.ndo_stop		= fs_enet_close,
+	.ndo_get_stats		= fs_enet_get_stats,
+	.ndo_start_xmit		= fs_enet_start_xmit,
+	.ndo_tx_timeout		= fs_timeout,
+	.ndo_set_multicast_list	= fs_set_multicast_list,
+	.ndo_do_ioctl		= fs_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= fs_enet_netpoll,
+#endif
+};
+
 static int __devinit fs_enet_probe(struct of_device *ofdev,
                                    const struct of_device_id *match)
 {
@@ -1093,22 +1109,13 @@
 	fep->tx_ring = fpi->tx_ring;
 	fep->rx_ring = fpi->rx_ring;
 
-	ndev->open = fs_enet_open;
-	ndev->hard_start_xmit = fs_enet_start_xmit;
-	ndev->tx_timeout = fs_timeout;
+	ndev->netdev_ops = &fs_enet_netdev_ops;
 	ndev->watchdog_timeo = 2 * HZ;
-	ndev->stop = fs_enet_close;
-	ndev->get_stats = fs_enet_get_stats;
-	ndev->set_multicast_list = fs_set_multicast_list;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	ndev->poll_controller = fs_enet_netpoll;
-#endif
 	if (fpi->use_napi)
 		netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi,
 		               fpi->napi_weight);
 
 	ndev->ethtool_ops = &fs_ethtool_ops;
-	ndev->do_ioctl = fs_ioctl;
 
 	init_timer(&fep->phy_timer_list);
 
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 65f5587..b2c4967 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1583,8 +1583,10 @@
 	struct net_device *dev = priv->ndev;
 
 	if (dev->flags & IFF_UP) {
+		netif_stop_queue(dev);
 		stop_gfar(dev);
 		startup_gfar(dev);
+		netif_start_queue(dev);
 	}
 
 	netif_tx_schedule_all(dev);
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 77e4b5b..806533c 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2686,6 +2686,32 @@
 	return 0;
 }
 
+static const struct net_device_ops emac_netdev_ops = {
+	.ndo_open		= emac_open,
+	.ndo_stop		= emac_close,
+	.ndo_get_stats		= emac_stats,
+	.ndo_set_multicast_list	= emac_set_multicast_list,
+	.ndo_do_ioctl		= emac_ioctl,
+	.ndo_tx_timeout		= emac_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_start_xmit		= emac_start_xmit,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
+static const struct net_device_ops emac_gige_netdev_ops = {
+	.ndo_open		= emac_open,
+	.ndo_stop		= emac_close,
+	.ndo_get_stats		= emac_stats,
+	.ndo_set_multicast_list	= emac_set_multicast_list,
+	.ndo_do_ioctl		= emac_ioctl,
+	.ndo_tx_timeout		= emac_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_start_xmit		= emac_start_xmit_sg,
+	.ndo_change_mtu		= emac_change_mtu,
+};
+
 static int __devinit emac_probe(struct of_device *ofdev,
 				const struct of_device_id *match)
 {
@@ -2827,23 +2853,14 @@
 	if (err != 0)
 		goto err_detach_tah;
 
-	/* Fill in the driver function table */
-	ndev->open = &emac_open;
 	if (dev->tah_dev)
 		ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
-	ndev->tx_timeout = &emac_tx_timeout;
 	ndev->watchdog_timeo = 5 * HZ;
-	ndev->stop = &emac_close;
-	ndev->get_stats = &emac_stats;
-	ndev->set_multicast_list = &emac_set_multicast_list;
-	ndev->do_ioctl = &emac_ioctl;
 	if (emac_phy_supports_gige(dev->phy_mode)) {
-		ndev->hard_start_xmit = &emac_start_xmit_sg;
-		ndev->change_mtu = &emac_change_mtu;
+		ndev->netdev_ops = &emac_gige_netdev_ops;
 		dev->commac.ops = &emac_commac_sg_ops;
-	} else {
-		ndev->hard_start_xmit = &emac_start_xmit;
-	}
+	} else
+		ndev->netdev_ops = &emac_netdev_ops;
 	SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
 
 	netif_carrier_off(ndev);
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index f4c315b..472f3f1 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -111,7 +111,7 @@
  *  Writes value at the given offset in the register array which stores
  *  the VLAN filter table.
  **/
-void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
 {
 	array_wr32(E1000_VFTA, offset, value);
 	wrfl();
diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h
index a34de52..1d690b4 100644
--- a/drivers/net/igb/e1000_mac.h
+++ b/drivers/net/igb/e1000_mac.h
@@ -66,7 +66,6 @@
 s32  igb_check_alt_mac_addr(struct e1000_hw *hw);
 void igb_reset_adaptive(struct e1000_hw *hw);
 void igb_update_adaptive(struct e1000_hw *hw);
-void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
 
 bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
 
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index fe71c7d..840782f 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -188,7 +188,7 @@
  *  returns SUCCESS if it successfully received a message notification and
  *  copied it into the receive buffer.
  **/
-s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
 	struct e1000_mbx_info *mbx = &hw->mbx;
 	s32 ret_val = -E1000_ERR_MBX;
@@ -214,7 +214,7 @@
  *  returns SUCCESS if it successfully copied message into the buffer and
  *  received an ack to that message within delay * timeout period
  **/
-s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
 	struct e1000_mbx_info *mbx = &hw->mbx;
 	s32 ret_val = 0;
@@ -232,19 +232,6 @@
 	return ret_val;
 }
 
-/**
- *  e1000_init_mbx_ops_generic - Initialize NVM function pointers
- *  @hw: pointer to the HW structure
- *
- *  Setups up the function pointers to no-op functions
- **/
-void e1000_init_mbx_ops_generic(struct e1000_hw *hw)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	mbx->ops.read_posted = igb_read_posted_mbx;
-	mbx->ops.write_posted = igb_write_posted_mbx;
-}
-
 static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
 {
 	u32 mbvficr = rd32(E1000_MBVFICR);
diff --git a/drivers/net/igb/e1000_mbx.h b/drivers/net/igb/e1000_mbx.h
index 6ec9890..ebc02ea 100644
--- a/drivers/net/igb/e1000_mbx.h
+++ b/drivers/net/igb/e1000_mbx.h
@@ -67,8 +67,6 @@
 
 s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
 s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 igb_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 igb_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
 s32 igb_check_for_msg(struct e1000_hw *, u16);
 s32 igb_check_for_ack(struct e1000_hw *, u16);
 s32 igb_check_for_rst(struct e1000_hw *, u16);
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index db7274e..08c8014 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1261,25 +1261,32 @@
 		int i;
 		unsigned char mac_addr[ETH_ALEN];
 
-		if (num_vfs)
+		if (num_vfs) {
 			adapter->vf_data = kcalloc(num_vfs,
 						sizeof(struct vf_data_storage),
 						GFP_KERNEL);
-		if (!adapter->vf_data) {
-			dev_err(&pdev->dev, "Could not allocate VF private "
-				"data - IOV enable failed\n");
-		} else {
-			err = pci_enable_sriov(pdev, num_vfs);
-			if (!err) {
-				adapter->vfs_allocated_count = num_vfs;
-				dev_info(&pdev->dev, "%d vfs allocated\n", num_vfs);
-				for (i = 0; i < adapter->vfs_allocated_count; i++) {
-					random_ether_addr(mac_addr);
-					igb_set_vf_mac(adapter, i, mac_addr);
-				}
+			if (!adapter->vf_data) {
+				dev_err(&pdev->dev,
+				        "Could not allocate VF private data - "
+					"IOV enable failed\n");
 			} else {
-				kfree(adapter->vf_data);
-				adapter->vf_data = NULL;
+				err = pci_enable_sriov(pdev, num_vfs);
+				if (!err) {
+					adapter->vfs_allocated_count = num_vfs;
+					dev_info(&pdev->dev,
+					         "%d vfs allocated\n",
+					         num_vfs);
+					for (i = 0;
+					     i < adapter->vfs_allocated_count;
+					     i++) {
+						random_ether_addr(mac_addr);
+						igb_set_vf_mac(adapter, i,
+						               mac_addr);
+					}
+				} else {
+					kfree(adapter->vf_data);
+					adapter->vf_data = NULL;
+				}
 			}
 		}
 	}
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 936ed2a..4bff35e 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -321,14 +321,11 @@
 extern int igbvf_up(struct igbvf_adapter *);
 extern void igbvf_down(struct igbvf_adapter *);
 extern void igbvf_reinit_locked(struct igbvf_adapter *);
-extern void igbvf_reset(struct igbvf_adapter *);
 extern int igbvf_setup_rx_resources(struct igbvf_adapter *, struct igbvf_ring *);
 extern int igbvf_setup_tx_resources(struct igbvf_adapter *, struct igbvf_ring *);
 extern void igbvf_free_rx_resources(struct igbvf_ring *);
 extern void igbvf_free_tx_resources(struct igbvf_ring *);
 extern void igbvf_update_stats(struct igbvf_adapter *);
-extern void igbvf_set_interrupt_capability(struct igbvf_adapter *);
-extern void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
 
 extern unsigned int copybreak;
 
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index c564842..b774666 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -52,6 +52,9 @@
 static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation.";
 
 static int igbvf_poll(struct napi_struct *napi, int budget);
+static void igbvf_reset(struct igbvf_adapter *);
+static void igbvf_set_interrupt_capability(struct igbvf_adapter *);
+static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
 
 static struct igbvf_info igbvf_vf_info = {
 	.mac                    = e1000_vfadapt,
@@ -990,7 +993,7 @@
 	e1e_flush();
 }
 
-void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter)
+static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter)
 {
 	if (adapter->msix_entries) {
 		pci_disable_msix(adapter->pdev);
@@ -1005,7 +1008,7 @@
  * Attempt to configure interrupts using the best available
  * capabilities of the hardware and kernel.
  **/
-void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter)
+static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter)
 {
 	int err = -ENOMEM;
 	int i;
@@ -1447,7 +1450,7 @@
  * set/changed during runtime. After reset the device needs to be
  * properly configured for Rx, Tx etc.
  */
-void igbvf_reset(struct igbvf_adapter *adapter)
+static void igbvf_reset(struct igbvf_adapter *adapter)
 {
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 	struct net_device *netdev = adapter->netdev;
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c
index aa246c9..2a4faf9 100644
--- a/drivers/net/igbvf/vf.c
+++ b/drivers/net/igbvf/vf.c
@@ -44,7 +44,7 @@
  *  e1000_init_mac_params_vf - Inits MAC params
  *  @hw: pointer to the HW structure
  **/
-s32 e1000_init_mac_params_vf(struct e1000_hw *hw)
+static s32 e1000_init_mac_params_vf(struct e1000_hw *hw)
 {
 	struct e1000_mac_info *mac = &hw->mac;
 
diff --git a/drivers/net/igbvf/vf.h b/drivers/net/igbvf/vf.h
index ec07228..1e8ce37 100644
--- a/drivers/net/igbvf/vf.h
+++ b/drivers/net/igbvf/vf.h
@@ -259,7 +259,6 @@
 /* These functions must be implemented by drivers */
 void e1000_rlpml_set_vf(struct e1000_hw *, u16);
 void e1000_init_function_pointers_vf(struct e1000_hw *hw);
-s32  e1000_init_mac_params_vf(struct e1000_hw *hw);
 
 
 #endif /* _E1000_VF_H_ */
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index cbc63ff..c5593f4 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1214,6 +1214,19 @@
 }
 #endif
 
+static const struct net_device_ops ioc3_netdev_ops = {
+	.ndo_open		= ioc3_open,
+	.ndo_stop		= ioc3_close,
+	.ndo_start_xmit		= ioc3_start_xmit,
+	.ndo_tx_timeout		= ioc3_timeout,
+	.ndo_get_stats		= ioc3_get_stats,
+	.ndo_set_multicast_list	= ioc3_set_multicast_list,
+	.ndo_do_ioctl		= ioc3_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= ioc3_set_mac_address,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int __devinit ioc3_probe(struct pci_dev *pdev,
 	const struct pci_device_id *ent)
 {
@@ -1310,15 +1323,8 @@
 	ioc3_get_eaddr(ip);
 
 	/* The IOC3-specific entries in the device structure. */
-	dev->open		= ioc3_open;
-	dev->hard_start_xmit	= ioc3_start_xmit;
-	dev->tx_timeout		= ioc3_timeout;
 	dev->watchdog_timeo	= 5 * HZ;
-	dev->stop		= ioc3_close;
-	dev->get_stats		= ioc3_get_stats;
-	dev->do_ioctl		= ioc3_ioctl;
-	dev->set_multicast_list	= ioc3_set_multicast_list;
-	dev->set_mac_address	= ioc3_set_mac_address;
+	dev->netdev_ops		= &ioc3_netdev_ops;
 	dev->ethtool_ops	= &ioc3_ethtool_ops;
 	dev->features		= NETIF_F_IP_CSUM;
 
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index 3126678..73585fd 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -181,6 +181,18 @@
 }
 #endif
 
+static const struct net_device_ops netcard_netdev_ops = {
+	.ndo_open		= net_open,
+	.ndo_stop		= net_close,
+	.ndo_start_xmit		= net_send_packet,
+	.ndo_get_stats		= net_get_stats,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_tx_timeout		= net_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 /*
  * This is the real probe routine. Linux has a history of friendly device
  * probes on the ISA bus. A good device probes avoids doing writes, and
@@ -303,13 +315,7 @@
 	np = netdev_priv(dev);
 	spin_lock_init(&np->lock);
 
-	dev->open		= net_open;
-	dev->stop		= net_close;
-	dev->hard_start_xmit	= net_send_packet;
-	dev->get_stats		= net_get_stats;
-	dev->set_multicast_list = &set_multicast_list;
-
-        dev->tx_timeout		= &net_tx_timeout;
+        dev->netdev_ops		= &netcard_netdev_ops;
         dev->watchdog_timeo	= MY_TX_TIMEOUT;
 
 	err = register_netdev(dev);
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index de4db0d..4791238 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -885,61 +885,6 @@
 }
 
 /**
- *  ixgbe_blink_led_start_82598 - Blink LED based on index.
- *  @hw: pointer to hardware structure
- *  @index: led number to blink
- **/
-static s32 ixgbe_blink_led_start_82598(struct ixgbe_hw *hw, u32 index)
-{
-	ixgbe_link_speed speed = 0;
-	bool link_up = 0;
-	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
-	/*
-	 * Link must be up to auto-blink the LEDs on the 82598EB MAC;
-	 * force it if link is down.
-	 */
-	hw->mac.ops.check_link(hw, &speed, &link_up, false);
-
-	if (!link_up) {
-		autoc_reg |= IXGBE_AUTOC_FLU;
-		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-		msleep(10);
-	}
-
-	led_reg &= ~IXGBE_LED_MODE_MASK(index);
-	led_reg |= IXGBE_LED_BLINK(index);
-	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
-	IXGBE_WRITE_FLUSH(hw);
-
-	return 0;
-}
-
-/**
- *  ixgbe_blink_led_stop_82598 - Stop blinking LED based on index.
- *  @hw: pointer to hardware structure
- *  @index: led number to stop blinking
- **/
-static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index)
-{
-	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
-	autoc_reg &= ~IXGBE_AUTOC_FLU;
-	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
-	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-
-	led_reg &= ~IXGBE_LED_MODE_MASK(index);
-	led_reg &= ~IXGBE_LED_BLINK(index);
-	led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
-	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
-	IXGBE_WRITE_FLUSH(hw);
-
-	return 0;
-}
-
-/**
  *  ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
  *  @hw: pointer to hardware structure
  *  @reg: analog register to read
@@ -1128,8 +1073,8 @@
 	.get_link_capabilities	= &ixgbe_get_link_capabilities_82598,
 	.led_on			= &ixgbe_led_on_generic,
 	.led_off		= &ixgbe_led_off_generic,
-	.blink_led_start	= &ixgbe_blink_led_start_82598,
-	.blink_led_stop		= &ixgbe_blink_led_stop_82598,
+	.blink_led_start	= &ixgbe_blink_led_start_generic,
+	.blink_led_stop		= &ixgbe_blink_led_stop_generic,
 	.set_rar		= &ixgbe_set_rar_generic,
 	.clear_rar		= &ixgbe_clear_rar_generic,
 	.set_vmdq		= &ixgbe_set_vmdq_82598,
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index beae7e0..29771fb 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -68,8 +68,6 @@
 s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan,
                          u32 vind, bool vlan_on);
 s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
-s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index);
-s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
 s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
 s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
@@ -991,40 +989,6 @@
 }
 
 /**
- *  ixgbe_blink_led_start_82599 - Blink LED based on index.
- *  @hw: pointer to hardware structure
- *  @index: led number to blink
- **/
-s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index)
-{
-	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
-	led_reg &= ~IXGBE_LED_MODE_MASK(index);
-	led_reg |= IXGBE_LED_BLINK(index);
-	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
-	IXGBE_WRITE_FLUSH(hw);
-
-	return 0;
-}
-
-/**
- *  ixgbe_blink_led_stop_82599 - Stop blinking LED based on index.
- *  @hw: pointer to hardware structure
- *  @index: led number to stop blinking
- **/
-s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index)
-{
-	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
-	led_reg &= ~IXGBE_LED_MODE_MASK(index);
-	led_reg &= ~IXGBE_LED_BLINK(index);
-	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
-	IXGBE_WRITE_FLUSH(hw);
-
-	return 0;
-}
-
-/**
  *  ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array
  *  @hw: pointer to hardware structure
  **/
@@ -1243,8 +1207,8 @@
 	.get_link_capabilities  = &ixgbe_get_link_capabilities_82599,
 	.led_on                 = &ixgbe_led_on_generic,
 	.led_off                = &ixgbe_led_off_generic,
-	.blink_led_start        = &ixgbe_blink_led_start_82599,
-	.blink_led_stop         = &ixgbe_blink_led_stop_82599,
+	.blink_led_start        = &ixgbe_blink_led_start_generic,
+	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
 	.set_rar                = &ixgbe_set_rar_generic,
 	.clear_rar              = &ixgbe_clear_rar_generic,
 	.set_vmdq               = &ixgbe_set_vmdq_82599,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 63ab667..5567519 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -2071,3 +2071,58 @@
 
 	return 0;
 }
+
+/**
+ *  ixgbe_blink_led_start_generic - Blink LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
+{
+	ixgbe_link_speed speed = 0;
+	bool link_up = 0;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/*
+	 * Link must be up to auto-blink the LEDs;
+	 * Force it if link is down.
+	 */
+	hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+	if (!link_up) {
+		autoc_reg |= IXGBE_AUTOC_FLU;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+		msleep(10);
+	}
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	autoc_reg &= ~IXGBE_AUTOC_FLU;
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg &= ~IXGBE_LED_BLINK(index);
+	led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 24f73e7..dd26089 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -76,6 +76,9 @@
 s32 ixgbe_read_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 *val);
 s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val);
 
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+
 #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
 
 #ifndef writeq
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index 470b676..f4417fc 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -290,7 +290,7 @@
 s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw,
                                struct ixgbe_dcb_config *dcb_config)
 {
-	u32 i, reg;
+	u32 i, reg, rx_pba_size;
 
 	/* If PFC is disabled globally then fall back to LFC. */
 	if (!dcb_config->pfc_mode_enable) {
@@ -301,17 +301,23 @@
 
 	/* Configure PFC Tx thresholds per TC */
 	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
-		/* Config and remember Tx */
+		if (dcb_config->rx_pba_cfg == pba_equal)
+			rx_pba_size = IXGBE_RXPBSIZE_64KB;
+		else
+			rx_pba_size = (i < 4) ? IXGBE_RXPBSIZE_80KB
+			                      : IXGBE_RXPBSIZE_48KB;
+
+		reg = ((rx_pba_size >> 5) & 0xFFE0);
 		if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
-		    dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) {
-			reg = hw->fc.high_water | IXGBE_FCRTH_FCEN;
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
-			reg = hw->fc.low_water | IXGBE_FCRTL_XONE;
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
-		} else {
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0);
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
-		}
+		    dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
+			reg |= IXGBE_FCRTL_XONE;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
+
+		reg = ((rx_pba_size >> 2) & 0xFFE0);
+		if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
+		    dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
+			reg |= IXGBE_FCRTH_FCEN;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
 	}
 
 	/* Configure pause time (2 TCs per register) */
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index aafc120..f0a20fa 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -943,6 +943,24 @@
 }
 
 
+static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
+                               struct ethtool_wolinfo *wol)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int retval = 1;
+
+	switch(hw->device_id) {
+	case IXGBE_DEV_ID_82599_KX4:
+		retval = 0;
+		break;
+	default:
+		wol->supported = 0;
+		retval = 0;
+	}
+
+	return retval;
+}
+
 static void ixgbe_get_wol(struct net_device *netdev,
                           struct ethtool_wolinfo *wol)
 {
@@ -952,7 +970,8 @@
 	                 WAKE_BCAST | WAKE_MAGIC;
 	wol->wolopts = 0;
 
-	if (!device_can_wakeup(&adapter->pdev->dev))
+	if (ixgbe_wol_exclusion(adapter, wol) ||
+	    !device_can_wakeup(&adapter->pdev->dev))
 		return;
 
 	if (adapter->wol & IXGBE_WUFC_EX)
@@ -974,6 +993,9 @@
 	if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
 		return -EOPNOTSUPP;
 
+	if (ixgbe_wol_exclusion(adapter, wol))
+		return wol->wolopts ? -EOPNOTSUPP : 0;
+
 	adapter->wol = 0;
 
 	if (wol->wolopts & WAKE_UCAST)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 9ef128a..0188425 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2723,17 +2723,21 @@
  **/
 static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
 {
-	/* Start with base case */
-	adapter->num_rx_queues = 1;
-	adapter->num_tx_queues = 1;
-
 #ifdef CONFIG_IXGBE_DCB
 	if (ixgbe_set_dcb_queues(adapter))
-		return;
+		goto done;
 
 #endif
 	if (ixgbe_set_rss_queues(adapter))
-		return;
+		goto done;
+
+	/* fallback to base case */
+	adapter->num_rx_queues = 1;
+	adapter->num_tx_queues = 1;
+
+done:
+	/* Notify the stack of the (possibly) reduced Tx Queue count. */
+	adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
 }
 
 static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
@@ -2837,11 +2841,55 @@
 			}
 			ret = true;
 		} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-			for (i = 0; i < dcb_i; i++) {
-				adapter->rx_ring[i].reg_idx = i << 4;
-				adapter->tx_ring[i].reg_idx = i << 4;
+			if (dcb_i == 8) {
+				/*
+				 * Tx TC0 starts at: descriptor queue 0
+				 * Tx TC1 starts at: descriptor queue 32
+				 * Tx TC2 starts at: descriptor queue 64
+				 * Tx TC3 starts at: descriptor queue 80
+				 * Tx TC4 starts at: descriptor queue 96
+				 * Tx TC5 starts at: descriptor queue 104
+				 * Tx TC6 starts at: descriptor queue 112
+				 * Tx TC7 starts at: descriptor queue 120
+				 *
+				 * Rx TC0-TC7 are offset by 16 queues each
+				 */
+				for (i = 0; i < 3; i++) {
+					adapter->tx_ring[i].reg_idx = i << 5;
+					adapter->rx_ring[i].reg_idx = i << 4;
+				}
+				for ( ; i < 5; i++) {
+					adapter->tx_ring[i].reg_idx =
+					                         ((i + 2) << 4);
+					adapter->rx_ring[i].reg_idx = i << 4;
+				}
+				for ( ; i < dcb_i; i++) {
+					adapter->tx_ring[i].reg_idx =
+					                         ((i + 8) << 3);
+					adapter->rx_ring[i].reg_idx = i << 4;
+				}
+
+				ret = true;
+			} else if (dcb_i == 4) {
+				/*
+				 * Tx TC0 starts at: descriptor queue 0
+				 * Tx TC1 starts at: descriptor queue 64
+				 * Tx TC2 starts at: descriptor queue 96
+				 * Tx TC3 starts at: descriptor queue 112
+				 *
+				 * Rx TC0-TC3 are offset by 32 queues each
+				 */
+				adapter->tx_ring[0].reg_idx = 0;
+				adapter->tx_ring[1].reg_idx = 64;
+				adapter->tx_ring[2].reg_idx = 96;
+				adapter->tx_ring[3].reg_idx = 112;
+				for (i = 0 ; i < dcb_i; i++)
+					adapter->rx_ring[i].reg_idx = i << 5;
+
+				ret = true;
+			} else {
+				ret = false;
 			}
-			ret = true;
 		} else {
 			ret = false;
 		}
@@ -2992,9 +3040,6 @@
 	}
 
 out:
-	/* Notify the stack of the (possibly) reduced Tx Queue count. */
-	adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
-
 	return err;
 }
 
@@ -3611,9 +3656,9 @@
 
 	return 0;
 }
-
 #endif /* CONFIG_PM */
-static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
+
+static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
@@ -3672,18 +3717,46 @@
 		pci_enable_wake(pdev, PCI_D3cold, 0);
 	}
 
+	*enable_wake = !!wufc;
+
 	ixgbe_release_hw_control(adapter);
 
 	pci_disable_device(pdev);
 
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	int retval;
+	bool wake;
+
+	retval = __ixgbe_shutdown(pdev, &wake);
+	if (retval)
+		return retval;
+
+	if (wake) {
+		pci_prepare_to_sleep(pdev);
+	} else {
+		pci_wake_from_d3(pdev, false);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
 static void ixgbe_shutdown(struct pci_dev *pdev)
 {
-	ixgbe_suspend(pdev, PMSG_SUSPEND);
+	bool wake;
+
+	__ixgbe_shutdown(pdev, &wake);
+
+	if (system_state == SYSTEM_POWER_OFF) {
+		pci_wake_from_d3(pdev, wake);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
 }
 
 /**
@@ -3917,7 +3990,7 @@
 	}
 	hw->mac.ops.setup_sfp(hw);
 
-	if (!adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)
+	if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
 		/* This will also work for DA Twinax connections */
 		schedule_work(&adapter->multispeed_fiber_task);
 	adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK;
@@ -4342,7 +4415,7 @@
 	int count = 0;
 	unsigned int f;
 
-	r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping;
+	r_idx = skb->queue_mapping;
 	tx_ring = &adapter->tx_ring[r_idx];
 
 	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
index 380a1a5..384e072 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/mac89x0.c
@@ -168,6 +168,17 @@
 	nubus_writew(swab16(value), dev->mem_start + portno);
 }
 
+static const struct net_device_ops mac89x0_netdev_ops = {
+	.ndo_open		= net_open,
+	.ndo_stop		= net_close,
+	.ndo_start_xmit		= net_send_packet,
+	.ndo_get_stats		= net_get_stats,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_set_mac_address	= set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 /* Probe for the CS8900 card in slot E.  We won't bother looking
    anywhere else until we have a really good reason to do so. */
 struct net_device * __init mac89x0_probe(int unit)
@@ -280,12 +291,7 @@
 
 	printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
 
-	dev->open		= net_open;
-	dev->stop		= net_close;
-	dev->hard_start_xmit = net_send_packet;
-	dev->get_stats	= net_get_stats;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->set_mac_address = &set_mac_address;
+	dev->netdev_ops		= &mac89x0_netdev_ops;
 
 	err = register_netdev(dev);
 	if (err)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index f505010..e82aee4 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -316,10 +316,11 @@
 	dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
 		(unsigned long)status);
 
-	if (status & MACB_BIT(UND)) {
+	if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
 		int i;
-		printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
-			bp->dev->name);
+		printk(KERN_ERR "%s: TX %s, resetting buffers\n",
+			bp->dev->name, status & MACB_BIT(UND) ?
+			"underrun" : "retry limit exceeded");
 
 		/* Transfer ongoing, disable transmitter, to avoid confusion */
 		if (status & MACB_BIT(TGO))
@@ -520,27 +521,10 @@
 	macb_writel(bp, RSR, status);
 
 	work_done = 0;
-	if (!status) {
-		/*
-		 * This may happen if an interrupt was pending before
-		 * this function was called last time, and no packets
-		 * have been received since.
-		 */
-		napi_complete(napi);
-		goto out;
-	}
 
 	dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
 		(unsigned long)status, budget);
 
-	if (!(status & MACB_BIT(REC))) {
-		dev_warn(&bp->pdev->dev,
-			 "No RX buffers complete, status = %02lx\n",
-			 (unsigned long)status);
-		napi_complete(napi);
-		goto out;
-	}
-
 	work_done = macb_rx(bp, budget);
 	if (work_done < budget)
 		napi_complete(napi);
@@ -549,7 +533,6 @@
 	 * We've done what we can to clean the buffers. Make sure we
 	 * get notified when new packets arrive.
 	 */
-out:
 	macb_writel(bp, IER, MACB_RX_INT_FLAGS);
 
 	/* TODO: Handle errors */
@@ -590,7 +573,8 @@
 			}
 		}
 
-		if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND)))
+		if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND) |
+			    MACB_BIT(ISR_RLE)))
 			macb_tx(bp);
 
 		/*
@@ -1100,6 +1084,18 @@
 	return phy_mii_ioctl(phydev, if_mii(rq), cmd);
 }
 
+static const struct net_device_ops macb_netdev_ops = {
+	.ndo_open		= macb_open,
+	.ndo_stop		= macb_close,
+	.ndo_start_xmit		= macb_start_xmit,
+	.ndo_set_multicast_list	= macb_set_rx_mode,
+	.ndo_get_stats		= macb_get_stats,
+	.ndo_do_ioctl		= macb_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init macb_probe(struct platform_device *pdev)
 {
 	struct eth_platform_data *pdata;
@@ -1175,12 +1171,7 @@
 		goto err_out_iounmap;
 	}
 
-	dev->open = macb_open;
-	dev->stop = macb_close;
-	dev->hard_start_xmit = macb_start_xmit;
-	dev->get_stats = macb_get_stats;
-	dev->set_multicast_list = macb_set_rx_mode;
-	dev->do_ioctl = macb_ioctl;
+	dev->netdev_ops = &macb_netdev_ops;
 	netif_napi_add(dev, &bp->napi, macb_poll, 64);
 	dev->ethtool_ops = &macb_ethtool_ops;
 
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index 527166e..acd143d 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -167,6 +167,18 @@
 	return err;
 }
 
+static const struct net_device_ops macsonic_netdev_ops = {
+	.ndo_open		= macsonic_open,
+	.ndo_stop		= macsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_set_multicast_list	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init macsonic_init(struct net_device *dev)
 {
 	struct sonic_local* lp = netdev_priv(dev);
@@ -198,12 +210,7 @@
 	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
 	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
 
-	dev->open = macsonic_open;
-	dev->stop = macsonic_close;
-	dev->hard_start_xmit = sonic_send_packet;
-	dev->get_stats = sonic_get_stats;
-	dev->set_multicast_list = &sonic_multicast_list;
-	dev->tx_timeout = sonic_tx_timeout;
+	dev->netdev_ops = &macsonic_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	/*
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 70d3ef4a..214a8cf 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -376,7 +376,8 @@
 	const struct macvlan_dev *vlan = netdev_priv(dev);
 	struct net_device *lowerdev = vlan->lowerdev;
 
-	if (lowerdev->ethtool_ops->get_rx_csum == NULL)
+	if (lowerdev->ethtool_ops == NULL ||
+	    lowerdev->ethtool_ops->get_rx_csum == NULL)
 		return 0;
 	return lowerdev->ethtool_ops->get_rx_csum(lowerdev);
 }
@@ -387,7 +388,8 @@
 	const struct macvlan_dev *vlan = netdev_priv(dev);
 	struct net_device *lowerdev = vlan->lowerdev;
 
-	if (!lowerdev->ethtool_ops->get_settings)
+	if (!lowerdev->ethtool_ops ||
+	    !lowerdev->ethtool_ops->get_settings)
 		return -EOPNOTSUPP;
 
 	return lowerdev->ethtool_ops->get_settings(lowerdev, cmd);
@@ -398,7 +400,8 @@
 	const struct macvlan_dev *vlan = netdev_priv(dev);
 	struct net_device *lowerdev = vlan->lowerdev;
 
-	if (!lowerdev->ethtool_ops->get_flags)
+	if (!lowerdev->ethtool_ops ||
+	    !lowerdev->ethtool_ops->get_flags)
 		return 0;
 	return lowerdev->ethtool_ops->get_flags(lowerdev);
 }
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index eda72dd..510633f 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -181,7 +181,7 @@
 	mdev->workqueue = create_singlethread_workqueue("mlx4_en");
 	if (!mdev->workqueue) {
 		err = -ENOMEM;
-		goto err_close_nic;
+		goto err_mr;
 	}
 
 	/* At this stage all non-port specific tasks are complete:
@@ -214,9 +214,8 @@
 	flush_workqueue(mdev->workqueue);
 
 	/* Stop event queue before we drop down to release shared SW state */
-
-err_close_nic:
 	destroy_workqueue(mdev->workqueue);
+
 err_mr:
 	mlx4_mr_free(dev, &mdev->mr);
 err_uar:
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 303c23d..438678a 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -348,11 +348,9 @@
 	if (netif_msg_timer(priv))
 		mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port);
 
-	if (netif_carrier_ok(dev)) {
-		priv->port_stats.tx_timeout++;
-		mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
-		queue_work(mdev->workqueue, &priv->watchdog_task);
-	}
+	priv->port_stats.tx_timeout++;
+	mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
+	queue_work(mdev->workqueue, &priv->watchdog_task);
 }
 
 
@@ -761,9 +759,14 @@
 	struct net_device *dev = priv->dev;
 
 	mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
-	mlx4_en_stop_port(dev);
-	if (mlx4_en_start_port(dev))
-	    mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+
+	mutex_lock(&mdev->state_lock);
+	if (priv->port_up) {
+		mlx4_en_stop_port(dev);
+		if (mlx4_en_start_port(dev))
+			mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+	}
+	mutex_unlock(&mdev->state_lock);
 }
 
 
@@ -1054,7 +1057,7 @@
 	 * Set driver features
 	 */
 	dev->features |= NETIF_F_SG;
-	dev->features |= NETIF_F_HW_CSUM;
+	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_HW_VLAN_TX |
 			 NETIF_F_HW_VLAN_RX |
diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c
index c5a4c03..a29abe8 100644
--- a/drivers/net/mlx4/en_port.c
+++ b/drivers/net/mlx4/en_port.c
@@ -151,6 +151,7 @@
 	struct mlx4_cmd_mailbox *mailbox;
 	u64 in_mod = reset << 8 | port;
 	int err;
+	int i;
 
 	mailbox = mlx4_alloc_cmd_mailbox(mdev->dev);
 	if (IS_ERR(mailbox))
@@ -165,38 +166,18 @@
 
 	spin_lock_bh(&priv->stats_lock);
 
-	stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) -
-			    be32_to_cpu(mlx4_en_stats->RDROP);
-	stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_prio_1) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_prio_2) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_prio_3) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_prio_4) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_prio_5) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_prio_6) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_prio_7) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_novlan) +
-			    be64_to_cpu(mlx4_en_stats->TTOT_loopbk);
-	stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_prio_1) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_prio_2) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_prio_3) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_prio_4) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_prio_5) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_prio_6) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_prio_7) +
-			  be64_to_cpu(mlx4_en_stats->ROCT_novlan);
-
-	stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) +
-			  be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk);
+	stats->rx_packets = 0;
+	stats->rx_bytes = 0;
+	for (i = 0; i < priv->rx_ring_num; i++) {
+		stats->rx_packets += priv->rx_ring[i].packets;
+		stats->rx_bytes += priv->rx_ring[i].bytes;
+	}
+	stats->tx_packets = 0;
+	stats->tx_bytes = 0;
+	for (i = 0; i <= priv->tx_ring_num; i++) {
+		stats->tx_packets += priv->tx_ring[i].packets;
+		stats->tx_bytes += priv->tx_ring[i].bytes;
+	}
 
 	stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) +
 			   be32_to_cpu(mlx4_en_stats->RdropLength) +
diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c
index a054520..65ca706 100644
--- a/drivers/net/mlx4/en_resources.c
+++ b/drivers/net/mlx4/en_resources.c
@@ -94,3 +94,9 @@
 
 	vunmap(buf->direct.buf);
 }
+
+void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event)
+{
+    return;
+}
+
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 7e40741..0cbb78c 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -436,8 +436,9 @@
 		/* Initialize page allocators */
 		err = mlx4_en_init_allocator(priv, ring);
 		if (err) {
-			 mlx4_err(mdev, "Failed initializing ring allocator\n");
-			 goto err_allocator;
+			mlx4_err(mdev, "Failed initializing ring allocator\n");
+			ring_ind--;
+			goto err_allocator;
 		}
 
 		/* Fill Rx buffers */
@@ -467,6 +468,7 @@
 				     ring->wqres.db.dma, &ring->srq);
 		if (err){
 			mlx4_err(mdev, "Failed to allocate srq\n");
+			ring_ind--;
 			goto err_srq;
 		}
 		ring->srq.event = mlx4_en_srq_event;
@@ -926,12 +928,6 @@
 	}
 }
 
-static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event)
-{
-    return;
-}
-
-
 static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
 				 int qpn, int srqn, int cqn,
 				 enum mlx4_qp_state *state,
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 4afd599..ac6fc49 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -112,6 +112,7 @@
 		mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn);
 		goto err_reserve;
 	}
+	ring->qp.event = mlx4_en_sqp_event;
 
 	return 0;
 
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index e9af32d..ef840ab 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -538,6 +538,7 @@
 void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
 			     int is_tx, int rss, int qpn, int cqn, int srqn,
 			     struct mlx4_qp_context *context);
+void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event);
 int mlx4_en_map_buffer(struct mlx4_buf *buf);
 void mlx4_en_unmap_buffer(struct mlx4_buf *buf);
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 9eed126..f2c4a66 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2447,6 +2447,7 @@
 		lro_mgr->lro_arr = ss->rx_done.lro_desc;
 		lro_mgr->get_frag_header = myri10ge_get_frag_header;
 		lro_mgr->max_aggr = myri10ge_lro_max_pkts;
+		lro_mgr->frag_align_pad = 2;
 		if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
 			lro_mgr->max_aggr = MAX_SKB_FRAGS;
 
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2fbf9f9..652a368 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1758,7 +1758,7 @@
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
 	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
-	PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"),
+	PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index cf24cc3..e707051 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -19,6 +19,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
+#include <linux/err.h>
 
 #define MII_REGS_NUM 29
 
@@ -207,8 +208,8 @@
 	int ret;
 
 	pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
-	if (!pdev) {
-		ret = -ENOMEM;
+	if (IS_ERR(pdev)) {
+		ret = PTR_ERR(pdev);
 		goto err_pdev;
 	}
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index eb6411c..7a3ec9d 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -69,6 +69,11 @@
 #define MII_M1111_COPPER		0
 #define MII_M1111_FIBER			1
 
+#define MII_88E1121_PHY_LED_CTRL	16
+#define MII_88E1121_PHY_LED_PAGE	3
+#define MII_88E1121_PHY_LED_DEF		0x0030
+#define MII_88E1121_PHY_PAGE		22
+
 #define MII_M1011_PHY_STATUS		0x11
 #define MII_M1011_PHY_STATUS_1000	0x8000
 #define MII_M1011_PHY_STATUS_100	0x4000
@@ -154,6 +159,30 @@
 	return err;
 }
 
+static int m88e1121_config_aneg(struct phy_device *phydev)
+{
+	int err, temp;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_M1011_PHY_SCR,
+			MII_M1011_PHY_SCR_AUTO_CROSS);
+	if (err < 0)
+		return err;
+
+	temp = phy_read(phydev, MII_88E1121_PHY_PAGE);
+
+	phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+	phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
+	phy_write(phydev, MII_88E1121_PHY_PAGE, temp);
+
+	err = genphy_config_aneg(phydev);
+
+	return err;
+}
+
 static int m88e1111_config_init(struct phy_device *phydev)
 {
 	int err;
@@ -429,6 +458,18 @@
 	return 0;
 }
 
+static int m88e1121_did_interrupt(struct phy_device *phydev)
+{
+	int imask;
+
+	imask = phy_read(phydev, MII_M1011_IEVENT);
+
+	if (imask & MII_M1011_IMASK_INIT)
+		return 1;
+
+	return 0;
+}
+
 static struct phy_driver marvell_drivers[] = {
 	{
 		.phy_id = 0x01410c60,
@@ -482,6 +523,19 @@
 		.driver = {.owner = THIS_MODULE,},
 	},
 	{
+		.phy_id = 0x01410cb0,
+		.phy_id_mask = 0xfffffff0,
+		.name = "Marvell 88E1121R",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_aneg = &m88e1121_config_aneg,
+		.read_status = &marvell_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.did_interrupt = &m88e1121_did_interrupt,
+		.driver = { .owner = THIS_MODULE },
+	},
+	{
 		.phy_id = 0x01410cd0,
 		.phy_id_mask = 0xfffffff0,
 		.name = "Marvell 88E1145",
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 3ff1f42..61755cb 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -434,7 +434,7 @@
 	phydev->adjust_state = handler;
 
 	INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine);
-	schedule_delayed_work(&phydev->state_queue, jiffies + HZ);
+	schedule_delayed_work(&phydev->state_queue, HZ);
 }
 
 /**
@@ -655,6 +655,10 @@
 	struct phy_device *phydev =
 		container_of(work, struct phy_device, phy_queue);
 
+	if (phydev->drv->did_interrupt &&
+	    !phydev->drv->did_interrupt(phydev))
+		goto ignore;
+
 	err = phy_disable_interrupts(phydev);
 
 	if (err)
@@ -681,6 +685,11 @@
 
 	return;
 
+ignore:
+	atomic_dec(&phydev->irq_disable);
+	enable_irq(phydev->irq);
+	return;
+
 irq_enable_err:
 	disable_irq(phydev->irq);
 	atomic_inc(&phydev->irq_disable);
@@ -937,6 +946,5 @@
 	if (err < 0)
 		phy_error(phydev);
 
-	schedule_delayed_work(&phydev->state_queue,
-				jiffies + PHY_STATE_TIME * HZ);
+	schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ);
 }
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index a5ac2bd..4f3ada6 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2101,6 +2101,9 @@
 	if (ret) {
 		pr_debug("%s: WEP/WPA setup failed %d\n", __func__,
 			 ret);
+		ret = -EPERM;
+		gelic_wl_send_iwap_event(wl, NULL);
+		goto out;
 	}
 
 	/* start association */
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index dee23b1..7269a42 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -448,9 +448,6 @@
 
 		WARN_ON(channel->rx_pkt != NULL);
 		efx_rx_strategy(channel);
-
-		netif_napi_add(channel->napi_dev, &channel->napi_str,
-			       efx_poll, napi_weight);
 	}
 }
 
@@ -1321,6 +1318,8 @@
 
 	efx_for_each_channel(channel, efx) {
 		channel->napi_dev = efx->net_dev;
+		netif_napi_add(channel->napi_dev, &channel->napi_str,
+			       efx_poll, napi_weight);
 	}
 	return 0;
 }
@@ -1330,6 +1329,8 @@
 	struct efx_channel *channel;
 
 	efx_for_each_channel(channel, efx) {
+		if (channel->napi_dev)
+			netif_napi_del(&channel->napi_str);
 		channel->napi_dev = NULL;
 	}
 }
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index d4629ab..466a8ab 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1176,9 +1176,9 @@
 
 	EFX_POPULATE_QWORD_1(phy_event, EV_CODE, GLOBAL_EV_DECODE);
 	if (EFX_IS10G(efx))
-		EFX_SET_OWORD_FIELD(phy_event, XG_PHY_INTR, 1);
+		EFX_SET_QWORD_FIELD(phy_event, XG_PHY_INTR, 1);
 	else
-		EFX_SET_OWORD_FIELD(phy_event, G_PHY0_INTR, 1);
+		EFX_SET_QWORD_FIELD(phy_event, G_PHY0_INTR, 1);
 
 	falcon_generate_event(&efx->channel[0], &phy_event);
 }
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 7b18827..3ab28bb 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1188,6 +1188,19 @@
 	return ret;
 }
 
+static const struct net_device_ops sh_eth_netdev_ops = {
+	.ndo_open		= sh_eth_open,
+	.ndo_stop		= sh_eth_close,
+	.ndo_start_xmit		= sh_eth_start_xmit,
+	.ndo_get_stats		= sh_eth_get_stats,
+	.ndo_set_multicast_list	= sh_eth_set_multicast_list,
+	.ndo_tx_timeout		= sh_eth_tx_timeout,
+	.ndo_do_ioctl		= sh_eth_do_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int sh_eth_drv_probe(struct platform_device *pdev)
 {
 	int ret, i, devno = 0;
@@ -1240,13 +1253,7 @@
 	mdp->edmac_endian = pd->edmac_endian;
 
 	/* set function */
-	ndev->open = sh_eth_open;
-	ndev->hard_start_xmit = sh_eth_start_xmit;
-	ndev->stop = sh_eth_close;
-	ndev->get_stats = sh_eth_get_stats;
-	ndev->set_multicast_list = sh_eth_set_multicast_list;
-	ndev->do_ioctl = sh_eth_do_ioctl;
-	ndev->tx_timeout = sh_eth_tx_timeout;
+	ndev->netdev_ops = &sh_eth_netdev_ops;
 	ndev->watchdog_timeo = TX_TIMEOUT;
 
 	mdp->post_rx = POST_RX >> (devno << 1);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index b8978d4..c11cdd0 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2674,7 +2674,7 @@
 	if (netif_msg_ifdown(skge))
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
-	netif_stop_queue(dev);
+	netif_tx_disable(dev);
 
 	if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
 		del_timer_sync(&skge->link_timer);
@@ -2881,7 +2881,6 @@
 	}
 
 	skge->tx_ring.to_clean = e;
-	netif_wake_queue(dev);
 }
 
 static void skge_tx_timeout(struct net_device *dev)
@@ -2893,6 +2892,7 @@
 
 	skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP);
 	skge_tx_clean(dev);
+	netif_wake_queue(dev);
 }
 
 static int skge_change_mtu(struct net_device *dev, int new_mtu)
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index e0d8477..a39c0b9 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -331,6 +331,18 @@
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops sun3_82586_netdev_ops = {
+	.ndo_open		= sun3_82586_open,
+	.ndo_stop		= sun3_82586_close,
+	.ndo_start_xmit		= sun3_82586_send_packet,
+	.ndo_set_multicast_list	= set_multicast_list,
+	.ndo_tx_timeout		= sun3_82586_timeout,
+	.ndo_get_stats		= sun3_82586_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int __init sun3_82586_probe1(struct net_device *dev,int ioaddr)
 {
 	int i, size, retval;
@@ -381,13 +393,8 @@
 
 	printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev->mem_start,size, dev->irq);
 
-	dev->open		= sun3_82586_open;
-	dev->stop		= sun3_82586_close;
-	dev->get_stats		= sun3_82586_get_stats;
-	dev->tx_timeout 	= sun3_82586_timeout;
+	dev->netdev_ops		= &sun3_82586_netdev_ops;
 	dev->watchdog_timeo	= HZ/20;
-	dev->hard_start_xmit 	= sun3_82586_send_packet;
-	dev->set_multicast_list = set_multicast_list;
 
 	dev->if_port 		= 0;
 	return 0;
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d91e95b..0ce2db6 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -862,6 +862,22 @@
 	return 0;
 }
 
+static const struct net_device_ops tc35815_netdev_ops = {
+	.ndo_open		= tc35815_open,
+	.ndo_stop		= tc35815_close,
+	.ndo_start_xmit		= tc35815_send_packet,
+	.ndo_get_stats		= tc35815_get_stats,
+	.ndo_set_multicast_list	= tc35815_set_multicast_list,
+	.ndo_tx_timeout		= tc35815_tx_timeout,
+	.ndo_do_ioctl		= tc35815_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= tc35815_poll_controller,
+#endif
+};
+
 static int __devinit tc35815_init_one(struct pci_dev *pdev,
 				      const struct pci_device_id *ent)
 {
@@ -904,21 +920,12 @@
 	ioaddr = pcim_iomap_table(pdev)[1];
 
 	/* Initialize the device structure. */
-	dev->open = tc35815_open;
-	dev->hard_start_xmit = tc35815_send_packet;
-	dev->stop = tc35815_close;
-	dev->get_stats = tc35815_get_stats;
-	dev->set_multicast_list = tc35815_set_multicast_list;
-	dev->do_ioctl = tc35815_ioctl;
+	dev->netdev_ops = &tc35815_netdev_ops;
 	dev->ethtool_ops = &tc35815_ethtool_ops;
-	dev->tx_timeout = tc35815_tx_timeout;
 	dev->watchdog_timeo = TC35815_TX_TIMEOUT;
 #ifdef TC35815_NAPI
 	netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT);
 #endif
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = tc35815_poll_controller;
-#endif
 
 	dev->irq = pdev->irq;
 	dev->base_addr = (unsigned long)ioaddr;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 6a736dd..201be42 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -2190,7 +2190,14 @@
 	if (!(tmp & EEPROM_ADDR_COMPLETE))
 		return -EBUSY;
 
-	*val = tr32(GRC_EEPROM_DATA);
+	tmp = tr32(GRC_EEPROM_DATA);
+
+	/*
+	 * The data will always be opposite the native endian
+	 * format.  Perform a blind byteswap to compensate.
+	 */
+	*val = swab32(tmp);
+
 	return 0;
 }
 
@@ -10663,7 +10670,13 @@
 
 		memcpy(&data, buf + i, 4);
 
-		tw32(GRC_EEPROM_DATA, be32_to_cpu(data));
+		/*
+		 * The SEEPROM interface expects the data to always be opposite
+		 * the native endian format.  We accomplish this by reversing
+		 * all the operations that would have been performed on the
+		 * data from a call to tg3_nvram_read_be32().
+		 */
+		tw32(GRC_EEPROM_DATA, swab32(be32_to_cpu(data)));
 
 		val = tr32(GRC_EEPROM_ADDR);
 		tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE);
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index bb43e7f..0f78f99 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -1561,6 +1561,18 @@
 	.set_settings	= tsi108_set_settings,
 };
 
+static const struct net_device_ops tsi108_netdev_ops = {
+	.ndo_open		= tsi108_open,
+	.ndo_stop		= tsi108_close,
+	.ndo_start_xmit		= tsi108_send_packet,
+	.ndo_set_multicast_list	= tsi108_set_rx_mode,
+	.ndo_get_stats		= tsi108_get_stats,
+	.ndo_do_ioctl		= tsi108_do_ioctl,
+	.ndo_set_mac_address	= tsi108_set_mac,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int
 tsi108_init_one(struct platform_device *pdev)
 {
@@ -1616,14 +1628,8 @@
 	data->phy_type = einfo->phy_type;
 	data->irq_num = einfo->irq_num;
 	data->id = pdev->id;
-	dev->open = tsi108_open;
-	dev->stop = tsi108_close;
-	dev->hard_start_xmit = tsi108_send_packet;
-	dev->set_mac_address = tsi108_set_mac;
-	dev->set_multicast_list = tsi108_set_rx_mode;
-	dev->get_stats = tsi108_get_stats;
 	netif_napi_add(dev, &data->napi, tsi108_poll, 64);
-	dev->do_ioctl = tsi108_do_ioctl;
+	dev->netdev_ops = &tsi108_netdev_ops;
 	dev->ethtool_ops = &tsi108_ethtool_ops;
 
 	/* Apparently, the Linux networking code won't use scatter-gather
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index a1b0697..735bf41 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -93,7 +93,6 @@
 	atomic_t count;
 	struct tun_struct *tun;
 	struct net *net;
-	wait_queue_head_t	read_wait;
 };
 
 struct tun_sock;
@@ -156,6 +155,7 @@
 	tfile->tun = tun;
 	tun->tfile = tfile;
 	dev_hold(tun->dev);
+	sock_hold(tun->sk);
 	atomic_inc(&tfile->count);
 
 out:
@@ -165,11 +165,8 @@
 
 static void __tun_detach(struct tun_struct *tun)
 {
-	struct tun_file *tfile = tun->tfile;
-
 	/* Detach from net device */
 	netif_tx_lock_bh(tun->dev);
-	tfile->tun = NULL;
 	tun->tfile = NULL;
 	netif_tx_unlock_bh(tun->dev);
 
@@ -333,12 +330,19 @@
 	/* Inform the methods they need to stop using the dev.
 	 */
 	if (tfile) {
-		wake_up_all(&tfile->read_wait);
+		wake_up_all(&tun->socket.wait);
 		if (atomic_dec_and_test(&tfile->count))
 			__tun_detach(tun);
 	}
 }
 
+static void tun_free_netdev(struct net_device *dev)
+{
+	struct tun_struct *tun = netdev_priv(dev);
+
+	sock_put(tun->sk);
+}
+
 /* Net device open. */
 static int tun_net_open(struct net_device *dev)
 {
@@ -393,7 +397,7 @@
 	/* Notify and wake up reader process */
 	if (tun->flags & TUN_FASYNC)
 		kill_fasync(&tun->fasync, SIGIO, POLL_IN);
-	wake_up_interruptible(&tun->tfile->read_wait);
+	wake_up_interruptible(&tun->socket.wait);
 	return 0;
 
 drop:
@@ -490,7 +494,7 @@
 
 	DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
 
-	poll_wait(file, &tfile->read_wait, wait);
+	poll_wait(file, &tun->socket.wait, wait);
 
 	if (!skb_queue_empty(&tun->readq))
 		mask |= POLLIN | POLLRDNORM;
@@ -518,7 +522,7 @@
 	int err;
 
 	/* Under a page?  Don't bother with paged skb. */
-	if (prepad + len < PAGE_SIZE)
+	if (prepad + len < PAGE_SIZE || !linear)
 		linear = len;
 
 	skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock,
@@ -565,7 +569,8 @@
 
 	if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) {
 		align = NET_IP_ALIGN;
-		if (unlikely(len < ETH_HLEN))
+		if (unlikely(len < ETH_HLEN ||
+			     (gso.hdr_len && gso.hdr_len < ETH_HLEN)))
 			return -EINVAL;
 	}
 
@@ -762,7 +767,7 @@
 		goto out;
 	}
 
-	add_wait_queue(&tfile->read_wait, &wait);
+	add_wait_queue(&tun->socket.wait, &wait);
 	while (len) {
 		current->state = TASK_INTERRUPTIBLE;
 
@@ -793,7 +798,7 @@
 	}
 
 	current->state = TASK_RUNNING;
-	remove_wait_queue(&tfile->read_wait, &wait);
+	remove_wait_queue(&tun->socket.wait, &wait);
 
 out:
 	tun_put(tun);
@@ -810,7 +815,7 @@
 	tun->group = -1;
 
 	dev->ethtool_ops = &tun_ethtool_ops;
-	dev->destructor = free_netdev;
+	dev->destructor = tun_free_netdev;
 }
 
 /* Trivial set of netlink ops to allow deleting tun or tap
@@ -847,7 +852,7 @@
 
 static void tun_sock_destruct(struct sock *sk)
 {
-	dev_put(container_of(sk, struct tun_sock, sk)->tun->dev);
+	free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev);
 }
 
 static struct proto tun_proto = {
@@ -861,7 +866,6 @@
 	struct sock *sk;
 	struct tun_struct *tun;
 	struct net_device *dev;
-	struct tun_file *tfile = file->private_data;
 	int err;
 
 	dev = __dev_get_by_name(net, ifr->ifr_name);
@@ -919,13 +923,10 @@
 		if (!sk)
 			goto err_free_dev;
 
-		/* This ref count is for tun->sk. */
-		dev_hold(dev);
+		init_waitqueue_head(&tun->socket.wait);
 		sock_init_data(&tun->socket, sk);
 		sk->sk_write_space = tun_sock_write_space;
-		sk->sk_destruct = tun_sock_destruct;
 		sk->sk_sndbuf = INT_MAX;
-		sk->sk_sleep = &tfile->read_wait;
 
 		tun->sk = sk;
 		container_of(sk, struct tun_sock, sk)->tun = tun;
@@ -941,11 +942,13 @@
 		err = -EINVAL;
 		err = register_netdevice(tun->dev);
 		if (err < 0)
-			goto err_free_dev;
+			goto err_free_sk;
+
+		sk->sk_destruct = tun_sock_destruct;
 
 		err = tun_attach(tun, file);
 		if (err < 0)
-			goto err_free_dev;
+			goto failed;
 	}
 
 	DBG(KERN_INFO "%s: tun_set_iff\n", tun->dev->name);
@@ -1265,7 +1268,6 @@
 	atomic_set(&tfile->count, 0);
 	tfile->tun = NULL;
 	tfile->net = get_net(current->nsproxy->net_ns);
-	init_waitqueue_head(&tfile->read_wait);
 	file->private_data = tfile;
 	return 0;
 }
@@ -1283,14 +1285,16 @@
 		__tun_detach(tun);
 
 		/* If desireable, unregister the netdevice. */
-		if (!(tun->flags & TUN_PERSIST)) {
-			sock_put(tun->sk);
+		if (!(tun->flags & TUN_PERSIST))
 			unregister_netdevice(tun->dev);
-		}
 
 		rtnl_unlock();
 	}
 
+	tun = tfile->tun;
+	if (tun)
+		sock_put(tun->sk);
+
 	put_net(tfile->net);
 	kfree(tfile);
 
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index d3f39e8..44f8392 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1394,7 +1394,8 @@
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
-		upsmr |= UCC_GETH_UPSMR_RPM;
+		if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII)
+			upsmr |= UCC_GETH_UPSMR_RPM;
 		switch (ugeth->max_speed) {
 		case SPEED_10:
 			upsmr |= UCC_GETH_UPSMR_R10M;
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index a8228d8..2138535 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -899,6 +899,7 @@
 			/* cleanup should already have been scheduled */
 			break;
 		case -ENODEV:		/* disconnect() upcoming */
+		case -EPERM:
 			netif_device_detach(pegasus->net);
 			break;
 		default:
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index fb53ef8..754a4b1 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -377,7 +377,7 @@
 static int velocity_open(struct net_device *dev);
 static int velocity_change_mtu(struct net_device *dev, int mtu);
 static int velocity_xmit(struct sk_buff *skb, struct net_device *dev);
-static int velocity_intr(int irq, void *dev_instance);
+static irqreturn_t velocity_intr(int irq, void *dev_instance);
 static void velocity_set_multi(struct net_device *dev);
 static struct net_device_stats *velocity_get_stats(struct net_device *dev);
 static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -2215,7 +2215,7 @@
  *	efficiently as possible.
  */
 
-static int velocity_intr(int irq, void *dev_instance)
+static irqreturn_t velocity_intr(int irq, void *dev_instance)
 {
 	struct net_device *dev = dev_instance;
 	struct velocity_info *vptr = netdev_priv(dev);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index f21a617..c36d3a3 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -6713,11 +6713,11 @@
 				local->config.authType = AUTH_ENCRYPT;
 			} else
 				return -EINVAL;
-			break;
 
 			/* Commit the changes to flags if needed */
 			if (local->config.authType != currentAuthType)
 				set_bit (FLAG_COMMIT, &local->flags);
+			break;
 		}
 
 	case IW_AUTH_WPA_ENABLED:
diff --git a/drivers/net/wireless/ar9170/hw.h b/drivers/net/wireless/ar9170/hw.h
index 13091bd..53e250a 100644
--- a/drivers/net/wireless/ar9170/hw.h
+++ b/drivers/net/wireless/ar9170/hw.h
@@ -310,7 +310,7 @@
 
 struct ar9170_rx_head {
 	u8 plcp[12];
-};
+} __packed;
 
 struct ar9170_rx_tail {
 	union {
@@ -318,16 +318,16 @@
 			u8 rssi_ant0, rssi_ant1, rssi_ant2,
 			   rssi_ant0x, rssi_ant1x, rssi_ant2x,
 			   rssi_combined;
-		};
+		} __packed;
 		u8 rssi[7];
-	};
+	} __packed;
 
 	u8 evm_stream0[6], evm_stream1[6];
 	u8 phy_err;
 	u8 SAidx, DAidx;
 	u8 error;
 	u8 status;
-};
+} __packed;
 
 #define AR9170_ENC_ALG_NONE			0x0
 #define AR9170_ENC_ALG_WEP64			0x1
diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c
index ad29684..fddda47 100644
--- a/drivers/net/wireless/ar9170/usb.c
+++ b/drivers/net/wireless/ar9170/usb.c
@@ -59,6 +59,8 @@
 	{ USB_DEVICE(0x0cf3, 0x9170) },
 	/* Atheros TG121N */
 	{ USB_DEVICE(0x0cf3, 0x1001) },
+	/* Cace Airpcap NX */
+	{ USB_DEVICE(0xcace, 0x0300) },
 	/* D-Link DWA 160A */
 	{ USB_DEVICE(0x07d1, 0x3c10) },
 	/* Netgear WNDA3100 */
@@ -67,6 +69,8 @@
 	{ USB_DEVICE(0x0846, 0x9001) },
 	/* Zydas ZD1221 */
 	{ USB_DEVICE(0x0ace, 0x1221) },
+	/* ZyXEL NWD271N */
+	{ USB_DEVICE(0x0586, 0x3417) },
 	/* Z-Com UB81 BG */
 	{ USB_DEVICE(0x0cde, 0x0023) },
 	/* Z-Com UB82 ABG */
@@ -619,6 +623,39 @@
 	return 0;
 }
 
+static int ar9170_usb_init_device(struct ar9170_usb *aru)
+{
+	int err;
+
+	err = ar9170_usb_alloc_rx_irq_urb(aru);
+	if (err)
+		goto err_out;
+
+	err = ar9170_usb_alloc_rx_bulk_urbs(aru);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_usb_upload_firmware(aru);
+	if (err) {
+		err = ar9170_echo_test(&aru->common, 0x60d43110);
+		if (err) {
+			/* force user invention, by disabling the device */
+			err = usb_driver_set_configuration(aru->udev, -1);
+			dev_err(&aru->udev->dev, "device is in a bad state. "
+						 "please reconnect it!\n");
+			goto err_unrx;
+		}
+	}
+
+	return 0;
+
+err_unrx:
+	ar9170_usb_cancel_urbs(aru);
+
+err_out:
+	return err;
+}
+
 static int ar9170_usb_probe(struct usb_interface *intf,
 			const struct usb_device_id *id)
 {
@@ -654,32 +691,16 @@
 
 	err = ar9170_usb_reset(aru);
 	if (err)
-		goto err_unlock;
+		goto err_freehw;
 
 	err = ar9170_usb_request_firmware(aru);
 	if (err)
-		goto err_unlock;
+		goto err_freehw;
 
-	err = ar9170_usb_alloc_rx_irq_urb(aru);
+	err = ar9170_usb_init_device(aru);
 	if (err)
 		goto err_freefw;
 
-	err = ar9170_usb_alloc_rx_bulk_urbs(aru);
-	if (err)
-		goto err_unrx;
-
-	err = ar9170_usb_upload_firmware(aru);
-	if (err) {
-		err = ar9170_echo_test(&aru->common, 0x60d43110);
-		if (err) {
-			/* force user invention, by disabling the device */
-			err = usb_driver_set_configuration(aru->udev, -1);
-			dev_err(&aru->udev->dev, "device is in a bad state. "
-						 "please reconnect it!\n");
-			goto err_unrx;
-		}
-	}
-
 	err = ar9170_usb_open(ar);
 	if (err)
 		goto err_unrx;
@@ -699,7 +720,7 @@
 	release_firmware(aru->init_values);
 	release_firmware(aru->firmware);
 
-err_unlock:
+err_freehw:
 	usb_set_intfdata(intf, NULL);
 	usb_put_dev(udev);
 	ieee80211_free_hw(ar->hw);
@@ -726,12 +747,65 @@
 	ieee80211_free_hw(aru->common.hw);
 }
 
+#ifdef CONFIG_PM
+static int ar9170_suspend(struct usb_interface *intf,
+			  pm_message_t  message)
+{
+	struct ar9170_usb *aru = usb_get_intfdata(intf);
+
+	if (!aru)
+		return -ENODEV;
+
+	aru->common.state = AR9170_IDLE;
+	ar9170_usb_cancel_urbs(aru);
+
+	return 0;
+}
+
+static int ar9170_resume(struct usb_interface *intf)
+{
+	struct ar9170_usb *aru = usb_get_intfdata(intf);
+	int err;
+
+	if (!aru)
+		return -ENODEV;
+
+	usb_unpoison_anchored_urbs(&aru->rx_submitted);
+	usb_unpoison_anchored_urbs(&aru->tx_submitted);
+
+	/*
+	 * FIXME: firmware upload will fail on resume.
+	 * but this is better than a hang!
+	 */
+
+	err = ar9170_usb_init_device(aru);
+	if (err)
+		goto err_unrx;
+
+	err = ar9170_usb_open(&aru->common);
+	if (err)
+		goto err_unrx;
+
+	return 0;
+
+err_unrx:
+	aru->common.state = AR9170_IDLE;
+	ar9170_usb_cancel_urbs(aru);
+
+	return err;
+}
+#endif /* CONFIG_PM */
+
 static struct usb_driver ar9170_driver = {
 	.name = "ar9170usb",
 	.probe = ar9170_usb_probe,
 	.disconnect = ar9170_usb_disconnect,
 	.id_table = ar9170_usb_ids,
 	.soft_unbind = 1,
+#ifdef CONFIG_PM
+	.suspend = ar9170_suspend,
+	.resume = ar9170_resume,
+#endif /* CONFIG_PM */
 };
 
 static int __init ar9170_init(void)
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 0c02f1c..744f4f4 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -250,6 +250,8 @@
 	{ USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
 	/* Siemens Gigaset USB WLAN Adapter 11 */
 	{ USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
+	/* OQO Model 01+ Internal Wi-Fi */
+	{ USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
 	/*
 	 * at76c505amx-rfmd
 	 */
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index 71cb18d..dd1f301 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -493,6 +493,7 @@
 	int hdrlen, padsize, retval;
 	bool decrypt_error = false;
 	u8 keyix;
+	__le16 fc;
 
 	spin_lock_bh(&sc->rx.rxbuflock);
 
@@ -606,6 +607,7 @@
 		/* see if any padding is done by the hw and remove it */
 		hdr = (struct ieee80211_hdr *)skb->data;
 		hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+		fc = hdr->frame_control;
 
 		/* The MAC header is padded to have 32-bit boundary if the
 		 * packet payload is non-zero. The general calculation for
@@ -690,7 +692,7 @@
 			sc->rx.rxotherant = 0;
 		}
 
-		if (ieee80211_is_beacon(hdr->frame_control) &&
+		if (ieee80211_is_beacon(fc) &&
 				(sc->sc_flags & SC_OP_WAIT_FOR_BEACON)) {
 			sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
 			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 857d841..27eef8f 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1502,7 +1502,6 @@
 	.ndo_set_mac_address 	= atmel_set_mac_address,
 	.ndo_start_xmit 	= start_tx,
 	.ndo_do_ioctl 		= atmel_ioctl,
-	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index e228c1d..eae680b 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -555,11 +555,32 @@
 	return 1;
 }
 
+static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
+{
+	unsigned char *f = skb->data + ring->frameoffset;
+
+	return ((f[0] & f[1] & f[2] & f[3] & f[4] & f[5] & f[6] & f[7]) == 0xFF);
+}
+
+static void b43_poison_rx_buffer(struct b43_dmaring *ring, struct sk_buff *skb)
+{
+	struct b43_rxhdr_fw4 *rxhdr;
+	unsigned char *frame;
+
+	/* This poisons the RX buffer to detect DMA failures. */
+
+	rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
+	rxhdr->frame_len = 0;
+
+	B43_WARN_ON(ring->rx_buffersize < ring->frameoffset + sizeof(struct b43_plcp_hdr6) + 2);
+	frame = skb->data + ring->frameoffset;
+	memset(frame, 0xFF, sizeof(struct b43_plcp_hdr6) + 2 /* padding */);
+}
+
 static int setup_rx_descbuffer(struct b43_dmaring *ring,
 			       struct b43_dmadesc_generic *desc,
 			       struct b43_dmadesc_meta *meta, gfp_t gfp_flags)
 {
-	struct b43_rxhdr_fw4 *rxhdr;
 	dma_addr_t dmaaddr;
 	struct sk_buff *skb;
 
@@ -568,6 +589,7 @@
 	skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
 	if (unlikely(!skb))
 		return -ENOMEM;
+	b43_poison_rx_buffer(ring, skb);
 	dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
 	if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
 		/* ugh. try to realloc in zone_dma */
@@ -578,6 +600,7 @@
 		skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
 		if (unlikely(!skb))
 			return -ENOMEM;
+		b43_poison_rx_buffer(ring, skb);
 		dmaaddr = map_descbuffer(ring, skb->data,
 					 ring->rx_buffersize, 0);
 		if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
@@ -592,9 +615,6 @@
 	ring->ops->fill_descriptor(ring, desc, dmaaddr,
 				   ring->rx_buffersize, 0, 0, 0);
 
-	rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
-	rxhdr->frame_len = 0;
-
 	return 0;
 }
 
@@ -1483,12 +1503,17 @@
 			len = le16_to_cpu(rxhdr->frame_len);
 		} while (len == 0 && i++ < 5);
 		if (unlikely(len == 0)) {
-			/* recycle the descriptor buffer. */
-			sync_descbuffer_for_device(ring, meta->dmaaddr,
-						   ring->rx_buffersize);
-			goto drop;
+			dmaaddr = meta->dmaaddr;
+			goto drop_recycle_buffer;
 		}
 	}
+	if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) {
+		/* Something went wrong with the DMA.
+		 * The device did not touch the buffer and did not overwrite the poison. */
+		b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n");
+		dmaaddr = meta->dmaaddr;
+		goto drop_recycle_buffer;
+	}
 	if (unlikely(len > ring->rx_buffersize)) {
 		/* The data did not fit into one descriptor buffer
 		 * and is split over multiple buffers.
@@ -1501,6 +1526,7 @@
 		while (1) {
 			desc = ops->idx2desc(ring, *slot, &meta);
 			/* recycle the descriptor buffer. */
+			b43_poison_rx_buffer(ring, meta->skb);
 			sync_descbuffer_for_device(ring, meta->dmaaddr,
 						   ring->rx_buffersize);
 			*slot = next_slot(ring, *slot);
@@ -1519,8 +1545,7 @@
 	err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC);
 	if (unlikely(err)) {
 		b43dbg(ring->dev->wl, "DMA RX: setup_rx_descbuffer() failed\n");
-		sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
-		goto drop;
+		goto drop_recycle_buffer;
 	}
 
 	unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
@@ -1530,6 +1555,11 @@
 	b43_rx(ring->dev, skb, rxhdr);
 drop:
 	return;
+
+drop_recycle_buffer:
+	/* Poison and recycle the RX buffer. */
+	b43_poison_rx_buffer(ring, skb);
+	sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
 }
 
 void b43_dma_rx(struct b43_dmaring *ring)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4896e08..79b685e 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3974,6 +3974,11 @@
 	phy->next_txpwr_check_time = jiffies;
 	/* PHY TX errors counter. */
 	atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
+
+#if B43_DEBUG
+	phy->phy_locked = 0;
+	phy->radio_locked = 0;
+#endif
 }
 
 static void setup_struct_wldev_for_init(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 026b61c..e176b6e 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -131,12 +131,16 @@
 {
 	u32 macctl;
 
+#if B43_DEBUG
+	B43_WARN_ON(dev->phy.radio_locked);
+	dev->phy.radio_locked = 1;
+#endif
+
 	macctl = b43_read32(dev, B43_MMIO_MACCTL);
-	B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK);
 	macctl |= B43_MACCTL_RADIOLOCK;
 	b43_write32(dev, B43_MMIO_MACCTL, macctl);
-	/* Commit the write and wait for the device
-	 * to exit any radio register access. */
+	/* Commit the write and wait for the firmware
+	 * to finish any radio register access. */
 	b43_read32(dev, B43_MMIO_MACCTL);
 	udelay(10);
 }
@@ -145,11 +149,15 @@
 {
 	u32 macctl;
 
+#if B43_DEBUG
+	B43_WARN_ON(!dev->phy.radio_locked);
+	dev->phy.radio_locked = 0;
+#endif
+
 	/* Commit any write */
 	b43_read16(dev, B43_MMIO_PHY_VER);
 	/* unlock */
 	macctl = b43_read32(dev, B43_MMIO_MACCTL);
-	B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK));
 	macctl &= ~B43_MACCTL_RADIOLOCK;
 	b43_write32(dev, B43_MMIO_MACCTL, macctl);
 }
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index c9f5430..b2d9910 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -245,8 +245,10 @@
 	atomic_t txerr_cnt;
 
 #ifdef CONFIG_B43_DEBUG
-	/* PHY registers locked by b43_phy_lock()? */
+	/* PHY registers locked (w.r.t. firmware) */
 	bool phy_locked;
+	/* Radio registers locked (w.r.t. firmware) */
+	bool radio_locked;
 #endif /* B43_DEBUG */
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 2399328..527525c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -1192,7 +1192,7 @@
 			return -ENOMEM;
 		}
 	} else
-		iwl_rx_queue_reset(priv, rxq);
+		iwl3945_rx_queue_reset(priv, rxq);
 
 	iwl3945_rx_replenish(priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index ab7aaf6..5518884 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -215,6 +215,7 @@
 extern int iwl3945_tx_queue_init(struct iwl_priv *priv,
 			     struct iwl_tx_queue *txq, int count, u32 id);
 extern void iwl3945_rx_replenish(void *data);
+extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
 extern void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq);
 extern int iwl3945_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len,
 			    const void *data);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 3889158..1ef4192 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -976,11 +976,9 @@
 
 		rxq->queue[i] = NULL;
 
-		dma_sync_single_range_for_cpu(
-				&priv->pci_dev->dev, rxb->real_dma_addr,
-				rxb->aligned_dma_addr - rxb->real_dma_addr,
-				priv->hw_params.rx_buf_size,
-				PCI_DMA_FROMDEVICE);
+		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+				 priv->hw_params.rx_buf_size + 256,
+				 PCI_DMA_FROMDEVICE);
 		pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
 		/* Reclaim a command buffer only if this packet is a response
@@ -1031,9 +1029,6 @@
 			rxb->skb = NULL;
 		}
 
-		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-				 priv->hw_params.rx_buf_size + 256,
-				 PCI_DMA_FROMDEVICE);
 		spin_lock_irqsave(&rxq->lock, flags);
 		list_add_tail(&rxb->list, &priv->rxq.rx_used);
 		spin_unlock_irqrestore(&rxq->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 2f12424..6e98314 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -223,7 +223,7 @@
 #define CSR_EEPROM_REG_MSK_DATA		(0xFFFF0000)
 
 /* EEPROM GP */
-#define CSR_EEPROM_GP_VALID_MSK		(0x00000006)
+#define CSR_EEPROM_GP_VALID_MSK		(0x00000007)
 #define CSR_EEPROM_GP_BAD_SIGNATURE	(0x00000000)
 #define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ec9a138..cf7f0db 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -360,12 +360,16 @@
 
 /**
  * struct iwl_rx_queue - Rx queue
+ * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
+ * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
  * @read: Shared index to newest available Rx buffer
  * @write: Shared index to oldest written Rx packet
  * @free_count: Number of pre-allocated buffers in rx_free
  * @rx_free: list of free SKBs for use
  * @rx_used: List of Rx buffers with no SKB
  * @need_update: flag to indicate we need to update read/write index
+ * @rb_stts: driver's pointer to receive buffer status
+ * @rb_stts_dma: bus address of receive buffer status
  *
  * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
  */
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 1f117a4..71d5b8a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -799,6 +799,22 @@
 	/* Copy MAC header from skb into command buffer */
 	memcpy(tx_cmd->hdr, hdr, hdr_len);
 
+
+	/* Total # bytes to be transmitted */
+	len = (u16)skb->len;
+	tx_cmd->len = cpu_to_le16(len);
+
+	if (info->control.hw_key)
+		iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+
+	/* TODO need this for burst mode later on */
+	iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
+
+	/* set is_hcca to 0; it probably will never be implemented */
+	iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
+
+	iwl_update_tx_stats(priv, le16_to_cpu(fc), len);
+
 	/*
 	 * Use the first empty entry in this queue's command buffer array
 	 * to contain the Tx command and MAC header concatenated together
@@ -819,21 +835,30 @@
 	else
 		len_org = 0;
 
+	/* Tell NIC about any 2-byte padding after MAC header */
+	if (len_org)
+		tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
+
 	/* Physical address of this Tx command's header (not MAC header!),
 	 * within command buffer array. */
 	txcmd_phys = pci_map_single(priv->pci_dev,
-				    out_cmd, sizeof(struct iwl_cmd),
+				    &out_cmd->hdr, len,
 				    PCI_DMA_BIDIRECTIONAL);
 	pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
-	pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
+	pci_unmap_len_set(&out_cmd->meta, len, len);
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
 	 * first entry */
-	txcmd_phys += offsetof(struct iwl_cmd, hdr);
 	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
 						   txcmd_phys, len, 1, 0);
 
-	if (info->control.hw_key)
-		iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+	if (!ieee80211_has_morefrags(hdr->frame_control)) {
+		txq->need_update = 1;
+		if (qc)
+			priv->stations[sta_id].tid[tid].seq_number = seq_number;
+	} else {
+		wait_write_ptr = 1;
+		txq->need_update = 0;
+	}
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
 	 * if any (802.11 null frames have no payload). */
@@ -846,41 +871,29 @@
 							   0, 0);
 	}
 
-	/* Tell NIC about any 2-byte padding after MAC header */
-	if (len_org)
-		tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
-
-	/* Total # bytes to be transmitted */
-	len = (u16)skb->len;
-	tx_cmd->len = cpu_to_le16(len);
-	/* TODO need this for burst mode later on */
-	iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
-
-	/* set is_hcca to 0; it probably will never be implemented */
-	iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
-
-	iwl_update_tx_stats(priv, le16_to_cpu(fc), len);
-
 	scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
-		offsetof(struct iwl_tx_cmd, scratch);
+				offsetof(struct iwl_tx_cmd, scratch);
+
+	len = sizeof(struct iwl_tx_cmd) +
+		sizeof(struct iwl_cmd_header) + hdr_len;
+	/* take back ownership of DMA buffer to enable update */
+	pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys,
+				    len, PCI_DMA_BIDIRECTIONAL);
 	tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
 	tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
 
-	if (!ieee80211_has_morefrags(hdr->frame_control)) {
-		txq->need_update = 1;
-		if (qc)
-			priv->stations[sta_id].tid[tid].seq_number = seq_number;
-	} else {
-		wait_write_ptr = 1;
-		txq->need_update = 0;
-	}
-
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+		     le16_to_cpu(out_cmd->hdr.sequence));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
-
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
 
 	/* Set up entry for this TFD in Tx byte-count array */
-	priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len);
+	priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+						     le16_to_cpu(tx_cmd->len));
+
+	pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
+				       len, PCI_DMA_BIDIRECTIONAL);
 
 	/* Tell device the write index *just past* this latest filled TFD */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
@@ -968,18 +981,9 @@
 			INDEX_TO_SEQ(q->write_ptr));
 	if (out_cmd->meta.flags & CMD_SIZE_HUGE)
 		out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
-	len = (idx == TFD_CMD_SLOTS) ?
-			IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
+	len = sizeof(struct iwl_cmd) - sizeof(struct iwl_cmd_meta);
+	len += (idx == TFD_CMD_SLOTS) ?  IWL_MAX_SCAN_SIZE : 0;
 
-	phys_addr = pci_map_single(priv->pci_dev, out_cmd,
-				   len, PCI_DMA_BIDIRECTIONAL);
-	pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
-	pci_unmap_len_set(&out_cmd->meta, len, len);
-	phys_addr += offsetof(struct iwl_cmd, hdr);
-
-	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
-						   phys_addr, fix_size, 1,
-						   U32_PAD(cmd->len));
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 	switch (out_cmd->hdr.cmd) {
@@ -1007,6 +1011,15 @@
 		/* Set up entry in queue's byte count circular buffer */
 		priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0);
 
+	phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+				   fix_size, PCI_DMA_BIDIRECTIONAL);
+	pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
+	pci_unmap_len_set(&out_cmd->meta, len, fix_size);
+
+	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
+						   phys_addr, fix_size, 1,
+						   U32_PAD(cmd->len));
+
 	/* Increment and update queue's write index */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
 	ret = iwl_txq_update_write_ptr(priv, txq);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index ce72928..617c423 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -972,7 +972,7 @@
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	int txq_id = skb_get_queue_mapping(skb);
-	u16 len, idx, len_org, hdr_len;
+	u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */
 	u8 id;
 	u8 unicast;
 	u8 sta_id;
@@ -1074,6 +1074,40 @@
 	/* Copy MAC header from skb into command buffer */
 	memcpy(tx->hdr, hdr, hdr_len);
 
+
+	if (info->control.hw_key)
+		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
+
+	/* TODO need this for burst mode later on */
+	iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
+
+	/* set is_hcca to 0; it probably will never be implemented */
+	iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
+
+	/* Total # bytes to be transmitted */
+	len = (u16)skb->len;
+	tx->len = cpu_to_le16(len);
+
+
+	tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+	tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+
+	if (!ieee80211_has_morefrags(hdr->frame_control)) {
+		txq->need_update = 1;
+		if (qc)
+			priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
+	} else {
+		wait_write_ptr = 1;
+		txq->need_update = 0;
+	}
+
+	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+		     le16_to_cpu(out_cmd->hdr.sequence));
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
+	iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
+	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
+			   ieee80211_hdrlen(fc));
+
 	/*
 	 * Use the first empty entry in this queue's command buffer array
 	 * to contain the Tx command and MAC header concatenated together
@@ -1096,22 +1130,18 @@
 
 	/* Physical address of this Tx command's header (not MAC header!),
 	 * within command buffer array. */
-	txcmd_phys = pci_map_single(priv->pci_dev,
-				    out_cmd, sizeof(struct iwl_cmd),
-				    PCI_DMA_TODEVICE);
+	txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+				    len, PCI_DMA_TODEVICE);
+	/* we do not map meta data ... so we can safely access address to
+	 * provide to unmap command*/
 	pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
-	pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
-	/* Add buffer containing Tx command and MAC(!) header to TFD's
-	 * first entry */
-	txcmd_phys += offsetof(struct iwl_cmd, hdr);
+	pci_unmap_len_set(&out_cmd->meta, len, len);
 
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
 	 * first entry */
 	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
 						   txcmd_phys, len, 1, 0);
 
-	if (info->control.hw_key)
-		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
 	 * if any (802.11 null frames have no payload). */
@@ -1124,32 +1154,6 @@
 							   0, U32_PAD(len));
 	}
 
-	/* Total # bytes to be transmitted */
-	len = (u16)skb->len;
-	tx->len = cpu_to_le16(len);
-
-	/* TODO need this for burst mode later on */
-	iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
-
-	/* set is_hcca to 0; it probably will never be implemented */
-	iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
-
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
-	if (!ieee80211_has_morefrags(hdr->frame_control)) {
-		txq->need_update = 1;
-		if (qc)
-			priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
-	} else {
-		wait_write_ptr = 1;
-		txq->need_update = 0;
-	}
-
-	iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
-
-	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
-			   ieee80211_hdrlen(fc));
 
 	/* Tell device the write index *just past* this latest filled TFD */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
@@ -1661,6 +1665,37 @@
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
+void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+	unsigned long flags;
+	int i;
+	spin_lock_irqsave(&rxq->lock, flags);
+	INIT_LIST_HEAD(&rxq->rx_free);
+	INIT_LIST_HEAD(&rxq->rx_used);
+	/* Fill the rx_used queue with _all_ of the Rx buffers */
+	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+		/* In the reset function, these buffers may have been allocated
+		 * to an SKB, so we need to unmap and free potential storage */
+		if (rxq->pool[i].skb != NULL) {
+			pci_unmap_single(priv->pci_dev,
+					 rxq->pool[i].real_dma_addr,
+					 priv->hw_params.rx_buf_size,
+					 PCI_DMA_FROMDEVICE);
+			priv->alloc_rxb_skb--;
+			dev_kfree_skb(rxq->pool[i].skb);
+			rxq->pool[i].skb = NULL;
+		}
+		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+	}
+
+	/* Set us so that we have processed and used all buffers, but have
+	 * not restocked the Rx queue with fresh buffers */
+	rxq->read = rxq->write = 0;
+	rxq->free_count = 0;
+	spin_unlock_irqrestore(&rxq->lock, flags);
+}
+EXPORT_SYMBOL(iwl3945_rx_queue_reset);
+
 /*
  * this should be called while priv->lock is locked
  */
@@ -1685,6 +1720,34 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+	int i;
+	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+		if (rxq->pool[i].skb != NULL) {
+			pci_unmap_single(priv->pci_dev,
+					 rxq->pool[i].real_dma_addr,
+					 priv->hw_params.rx_buf_size,
+					 PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(rxq->pool[i].skb);
+		}
+	}
+
+	pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			    rxq->dma_addr);
+	pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status),
+			    rxq->rb_stts, rxq->rb_stts_dma);
+	rxq->bd = NULL;
+	rxq->rb_stts  = NULL;
+}
+EXPORT_SYMBOL(iwl3945_rx_queue_free);
+
+
 /* Convert linear signal-to-noise ratio into dB */
 static u8 ratio2dB[100] = {
 /*	 0   1   2   3   4   5   6   7   8   9 */
@@ -1802,9 +1865,9 @@
 
 		rxq->queue[i] = NULL;
 
-		pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->real_dma_addr,
-					    priv->hw_params.rx_buf_size,
-					    PCI_DMA_FROMDEVICE);
+		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+				priv->hw_params.rx_buf_size,
+				PCI_DMA_FROMDEVICE);
 		pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
 		/* Reclaim a command buffer only if this packet is a response
@@ -1852,9 +1915,6 @@
 			rxb->skb = NULL;
 		}
 
-		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-				priv->hw_params.rx_buf_size,
-				PCI_DMA_FROMDEVICE);
 		spin_lock_irqsave(&rxq->lock, flags);
 		list_add_tail(&rxb->list, &priv->rxq.rx_used);
 		spin_unlock_irqrestore(&rxq->lock, flags);
@@ -4075,7 +4135,7 @@
 	if (!static_key) {
 		sta_id = iwl3945_hw_find_station(priv, addr);
 		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_MAC80211(priv, "leave - %pMnot in station map.\n",
+			IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
 					    addr);
 			return -EINVAL;
 		}
@@ -4913,6 +4973,8 @@
 
 	hw->wiphy->custom_regulatory = true;
 
+	hw->wiphy->max_scan_ssids = 1; /* WILL FIX */
+
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 
@@ -5194,12 +5256,12 @@
 	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
 
 	iwl_rfkill_unregister(priv);
-	cancel_delayed_work(&priv->rfkill_poll);
+	cancel_delayed_work_sync(&priv->rfkill_poll);
 
 	iwl3945_dealloc_ucode_pci(priv);
 
 	if (priv->rxq.bd)
-		iwl_rx_queue_free(priv, &priv->rxq);
+		iwl3945_rx_queue_free(priv, &priv->rxq);
 	iwl3945_hw_txq_ctx_free(priv);
 
 	iwl3945_unset_hw_params(priv);
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 63d7e19..8e66977 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -170,6 +170,7 @@
 		lbs_deb_rx("rx err: frame received with bad length\n");
 		dev->stats.rx_length_errors++;
 		ret = 0;
+		dev_kfree_skb(skb);
 		goto done;
 	}
 
@@ -181,6 +182,7 @@
 		lbs_pr_alert("rxpd not ok\n");
 		dev->stats.rx_errors++;
 		ret = 0;
+		dev_kfree_skb(skb);
 		goto done;
 	}
 
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 57a0268..a9a9704 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -893,8 +893,7 @@
 		rx_desc->next_rx_desc_phys_addr =
 			cpu_to_le32(rxq->rx_desc_dma
 						+ nexti * sizeof(*rx_desc));
-		rx_desc->rx_ctrl =
-			cpu_to_le32(MWL8K_RX_CTRL_OWNED_BY_HOST);
+		rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST;
 	}
 
 	return 0;
@@ -3720,12 +3719,12 @@
 	return rc;
 }
 
-static void __devexit mwl8k_remove(struct pci_dev *pdev)
+static void __devexit mwl8k_shutdown(struct pci_dev *pdev)
 {
 	printk(KERN_ERR "===>%s(%u)\n", __func__, __LINE__);
 }
 
-static void __devexit mwl8k_shutdown(struct pci_dev *pdev)
+static void __devexit mwl8k_remove(struct pci_dev *pdev)
 {
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct mwl8k_priv *priv;
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index 081428d..632fac8 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -372,15 +372,13 @@
 	}
 
 	/* Wait upto 100ms for tx queue to empty */
-	k = 100;
-	do {
-		k--;
+	for (k = 100; k > 0; k--) {
 		udelay(1000);
 		ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
 					  &xmitting);
-		if (ret)
+		if (ret || !xmitting)
 			break;
-	} while ((k > 0) && xmitting);
+	}
 
 	if (k == 0)
 		ret = -ETIMEDOUT;
diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h
index 2dda5fe..ecf8b6e 100644
--- a/drivers/net/wireless/p54/p54.h
+++ b/drivers/net/wireless/p54/p54.h
@@ -14,9 +14,9 @@
  * published by the Free Software Foundation.
  */
 
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 #include <linux/leds.h>
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 enum p54_control_frame_types {
 	P54_CONTROL_TYPE_SETUP = 0,
@@ -116,7 +116,7 @@
 	FW_STATE_RESETTING,
 };
 
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 
 #define P54_LED_MAX_NAME_LEN 31
 
@@ -129,7 +129,7 @@
 	unsigned int registered;
 };
 
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 
 struct p54_common {
 	struct ieee80211_hw *hw;
@@ -177,10 +177,10 @@
 	u8 privacy_caps;
 	u8 rx_keycache_size;
 	/* LED management */
-	#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
 	struct p54_led_dev assoc_led;
 	struct p54_led_dev tx_led;
-	#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
 	u16 softled_state;		/* bit field of glowing LEDs */
 };
 
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 0c1b057..c8f0232 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -2543,8 +2543,6 @@
 	priv->basic_rate_mask = 0x15f;
 	skb_queue_head_init(&priv->tx_queue);
 	dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		     IEEE80211_HW_SUPPORTS_PS |
-		     IEEE80211_HW_PS_NULLFUNC_STACK |
 		     IEEE80211_HW_SIGNAL_DBM |
 		     IEEE80211_HW_NOISE_DBM;
 
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 2b222aa..d1fe577 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -457,9 +457,10 @@
 	struct ieee80211_tx_info *info;
 	struct p54_tx_info *minfo;
 	struct p54s_tx_info *dinfo;
+	unsigned long flags;
 	int ret = 0;
 
-	spin_lock_bh(&priv->tx_lock);
+	spin_lock_irqsave(&priv->tx_lock, flags);
 
 	while (!list_empty(&priv->tx_pending)) {
 		entry = list_entry(priv->tx_pending.next,
@@ -467,7 +468,7 @@
 
 		list_del_init(&entry->tx_list);
 
-		spin_unlock_bh(&priv->tx_lock);
+		spin_unlock_irqrestore(&priv->tx_lock, flags);
 
 		dinfo = container_of((void *) entry, struct p54s_tx_info,
 				     tx_list);
@@ -479,16 +480,14 @@
 
 		ret = p54spi_tx_frame(priv, skb);
 
-		spin_lock_bh(&priv->tx_lock);
-
 		if (ret < 0) {
 			p54_free_skb(priv->hw, skb);
-			goto out;
+			return ret;
 		}
-	}
 
-out:
-	spin_unlock_bh(&priv->tx_lock);
+		spin_lock_irqsave(&priv->tx_lock, flags);
+	}
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	return ret;
 }
 
@@ -498,12 +497,13 @@
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
 	struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
+	unsigned long flags;
 
 	BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
 
-	spin_lock_bh(&priv->tx_lock);
+	spin_lock_irqsave(&priv->tx_lock, flags);
 	list_add_tail(&di->tx_list, &priv->tx_pending);
-	spin_unlock_bh(&priv->tx_lock);
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
 
 	queue_work(priv->hw->workqueue, &priv->work);
 }
@@ -604,6 +604,7 @@
 static void p54spi_op_stop(struct ieee80211_hw *dev)
 {
 	struct p54s_priv *priv = dev->priv;
+	unsigned long flags;
 
 	if (mutex_lock_interruptible(&priv->mutex)) {
 		/* FIXME: how to handle this error? */
@@ -615,9 +616,9 @@
 	cancel_work_sync(&priv->work);
 
 	p54spi_power_off(priv);
-	spin_lock_bh(&priv->tx_lock);
+	spin_lock_irqsave(&priv->tx_lock, flags);
 	INIT_LIST_HEAD(&priv->tx_pending);
-	spin_unlock_bh(&priv->tx_lock);
+	spin_unlock_irqrestore(&priv->tx_lock, flags);
 
 	priv->fw_state = FW_STATE_OFF;
 	mutex_unlock(&priv->mutex);
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index da6640a..6cc6cbc 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -71,6 +71,7 @@
 	{USB_DEVICE(0x1260, 0xee22)},	/* SMC 2862W-G version 2 */
 	{USB_DEVICE(0x13b1, 0x000a)},	/* Linksys WUSB54G ver 2 */
 	{USB_DEVICE(0x13B1, 0x000C)},	/* Linksys WUSB54AG */
+	{USB_DEVICE(0x1413, 0x5400)},   /* Telsey 802.11g USB2.0 Adapter */
 	{USB_DEVICE(0x1435, 0x0427)},	/* Inventel UR054G */
 	{USB_DEVICE(0x2001, 0x3704)},	/* DLink DWL-G122 rev A2 */
 	{USB_DEVICE(0x413c, 0x8102)},	/* Spinnaker DUT */
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 05f94e2..5752aaa 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -646,10 +646,8 @@
 	 * Register HW.
 	 */
 	status = ieee80211_register_hw(rt2x00dev->hw);
-	if (status) {
-		rt2x00lib_remove_hw(rt2x00dev);
+	if (status)
 		return status;
-	}
 
 	set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 43fa0f8..9730b4f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -369,8 +369,6 @@
 	if (retval)
 		return retval;
 
-	rt2x00pci_free_reg(rt2x00dev);
-
 	pci_save_state(pci_dev);
 	pci_disable_device(pci_dev);
 	return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
@@ -381,7 +379,6 @@
 {
 	struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	int retval;
 
 	if (pci_set_power_state(pci_dev, PCI_D0) ||
 	    pci_enable_device(pci_dev) ||
@@ -390,20 +387,7 @@
 		return -EIO;
 	}
 
-	retval = rt2x00pci_alloc_reg(rt2x00dev);
-	if (retval)
-		return retval;
-
-	retval = rt2x00lib_resume(rt2x00dev);
-	if (retval)
-		goto exit_free_reg;
-
-	return 0;
-
-exit_free_reg:
-	rt2x00pci_free_reg(rt2x00dev);
-
-	return retval;
+	return rt2x00lib_resume(rt2x00dev);
 }
 EXPORT_SYMBOL_GPL(rt2x00pci_resume);
 #endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 7d50ca8..5015448 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -702,8 +702,6 @@
 	if (retval)
 		return retval;
 
-	rt2x00usb_free_reg(rt2x00dev);
-
 	/*
 	 * Decrease usbdev refcount.
 	 */
@@ -717,24 +715,10 @@
 {
 	struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	int retval;
 
 	usb_get_dev(interface_to_usbdev(usb_intf));
 
-	retval = rt2x00usb_alloc_reg(rt2x00dev);
-	if (retval)
-		return retval;
-
-	retval = rt2x00lib_resume(rt2x00dev);
-	if (retval)
-		goto exit_free_reg;
-
-	return 0;
-
-exit_free_reg:
-	rt2x00usb_free_reg(rt2x00dev);
-
-	return retval;
+	return rt2x00lib_resume(rt2x00dev);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_resume);
 #endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 420fff4..853b2b2 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2369,6 +2369,8 @@
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c
index a12a721..5a4ad15 100644
--- a/drivers/net/xtsonic.c
+++ b/drivers/net/xtsonic.c
@@ -108,6 +108,18 @@
 	return err;
 }
 
+static const struct net_device_ops xtsonic_netdev_ops = {
+	.ndo_open		= xtsonic_open,
+	.ndo_stop		= xtsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_set_multicast_list	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
 static int __init sonic_probe1(struct net_device *dev)
 {
 	static unsigned version_printed = 0;
@@ -205,12 +217,7 @@
 	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
 					 * SONIC_BUS_SCALE(lp->dma_bitmode));
 
-	dev->open = xtsonic_open;
-	dev->stop = xtsonic_close;
-	dev->hard_start_xmit	= sonic_send_packet;
-	dev->get_stats		= sonic_get_stats;
-	dev->set_multicast_list	= &sonic_multicast_list;
-	dev->tx_timeout		= sonic_tx_timeout;
+	dev->netdev_ops		= &xtsonic_netdev_ops;
 	dev->watchdog_timeo	= TX_TIMEOUT;
 
 	/*
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 1cd02f5..bc43f78 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -255,6 +255,9 @@
 {
 	int ret;
 
+	if (!platform_scoop_config)
+		return -ENODEV;
+
 	sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs;
 	sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index d3c92d7..5529585 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -317,7 +317,8 @@
 	struct input_dev *key_dev = sony_laptop_input.key_dev;
 	struct sony_laptop_keypress kp = { NULL };
 
-	if (event == SONYPI_EVENT_FNKEY_RELEASED) {
+	if (event == SONYPI_EVENT_FNKEY_RELEASED ||
+			event == SONYPI_EVENT_ANYBUTTON_RELEASED) {
 		/* Nothing, not all VAIOs generate this event */
 		return;
 	}
@@ -905,7 +906,6 @@
 	{ 0x05, SONYPI_EVENT_ANYBUTTON_RELEASED },
 	{ 0x86, SONYPI_EVENT_PKEY_P5 },
 	{ 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
-	{ 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
 	{ 0x87, SONYPI_EVENT_SETTINGKEY_PRESSED },
 	{ 0x07, SONYPI_EVENT_ANYBUTTON_RELEASED },
 	{ 0, 0 },
@@ -1004,6 +1004,7 @@
 	sony_call_snc_handle(0x0100, 0, &result);
 	sony_call_snc_handle(0x0101, 0, &result);
 	sony_call_snc_handle(0x0102, 0x100, &result);
+	sony_call_snc_handle(0x0127, 0, &result);
 
 	return 0;
 }
@@ -1040,7 +1041,7 @@
 
 	/* set the last requested brightness level */
 	if (sony_backlight_device &&
-			!sony_backlight_update_status(sony_backlight_device))
+			sony_backlight_update_status(sony_backlight_device) < 0)
 		printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
 
 	return 0;
@@ -1102,8 +1103,11 @@
 	err = rfkill_register(sony_wifi_rfkill);
 	if (err)
 		rfkill_free(sony_wifi_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill;
+		sony_nc_rfkill_set(sony_wifi_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
@@ -1124,8 +1128,11 @@
 	err = rfkill_register(sony_bluetooth_rfkill);
 	if (err)
 		rfkill_free(sony_bluetooth_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill;
+		sony_nc_rfkill_set(sony_bluetooth_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
@@ -1145,8 +1152,11 @@
 	err = rfkill_register(sony_wwan_rfkill);
 	if (err)
 		rfkill_free(sony_wwan_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill;
+		sony_nc_rfkill_set(sony_wwan_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
@@ -1166,8 +1176,11 @@
 	err = rfkill_register(sony_wimax_rfkill);
 	if (err)
 		rfkill_free(sony_wimax_rfkill);
-	else
+	else {
 		sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill;
+		sony_nc_rfkill_set(sony_wimax_rfkill->data,
+				RFKILL_STATE_UNBLOCKED);
+	}
 	return err;
 }
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a40b075..912be65 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -21,7 +21,7 @@
  *  02110-1301, USA.
  */
 
-#define TPACPI_VERSION "0.22"
+#define TPACPI_VERSION "0.23"
 #define TPACPI_SYSFS_VERSION 0x020300
 
 /*
@@ -303,11 +303,17 @@
 
 static struct workqueue_struct *tpacpi_wq;
 
+enum led_status_t {
+	TPACPI_LED_OFF = 0,
+	TPACPI_LED_ON,
+	TPACPI_LED_BLINK,
+};
+
 /* Special LED class that can defer work */
 struct tpacpi_led_classdev {
 	struct led_classdev led_classdev;
 	struct work_struct work;
-	enum led_brightness new_brightness;
+	enum led_status_t new_state;
 	unsigned int led;
 };
 
@@ -2946,12 +2952,18 @@
 	return len;
 }
 
-static void hotkey_enabledisable_warn(void)
+static void hotkey_enabledisable_warn(bool enable)
 {
 	tpacpi_log_usertask("procfs hotkey enable/disable");
-	WARN(1, TPACPI_WARN
-	     "hotkey enable/disable functionality has been "
-	     "removed from the driver. Hotkeys are always enabled.\n");
+	if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable),
+			TPACPI_WARN
+			"hotkey enable/disable functionality has been "
+			"removed from the driver.  Hotkeys are always "
+			"enabled\n"))
+		printk(TPACPI_ERR
+			"Please remove the hotkey=enable module "
+			"parameter, it is deprecated.  Hotkeys are always "
+			"enabled\n");
 }
 
 static int hotkey_write(char *buf)
@@ -2971,9 +2983,9 @@
 	res = 0;
 	while ((cmd = next_cmd(&buf))) {
 		if (strlencmp(cmd, "enable") == 0) {
-			hotkey_enabledisable_warn();
+			hotkey_enabledisable_warn(1);
 		} else if (strlencmp(cmd, "disable") == 0) {
-			hotkey_enabledisable_warn();
+			hotkey_enabledisable_warn(0);
 			res = -EPERM;
 		} else if (strlencmp(cmd, "reset") == 0) {
 			mask = hotkey_orig_mask;
@@ -4207,7 +4219,7 @@
 			container_of(work, struct tpacpi_led_classdev, work);
 
 	if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
-		light_set_status((data->new_brightness != LED_OFF));
+		light_set_status((data->new_state != TPACPI_LED_OFF));
 }
 
 static void light_sysfs_set(struct led_classdev *led_cdev,
@@ -4217,7 +4229,8 @@
 		container_of(led_cdev,
 			     struct tpacpi_led_classdev,
 			     led_classdev);
-	data->new_brightness = brightness;
+	data->new_state = (brightness != LED_OFF) ?
+				TPACPI_LED_ON : TPACPI_LED_OFF;
 	queue_work(tpacpi_wq, &data->work);
 }
 
@@ -4724,12 +4737,6 @@
 	TPACPI_LED_EC_HLMS = 0x0e,	/* EC reg to select led to command */
 };
 
-enum led_status_t {
-	TPACPI_LED_OFF = 0,
-	TPACPI_LED_ON,
-	TPACPI_LED_BLINK,
-};
-
 static enum led_access_mode led_supported;
 
 TPACPI_HANDLE(led, ec, "SLED",	/* 570 */
@@ -4841,23 +4848,13 @@
 	return rc;
 }
 
-static void led_sysfs_set_status(unsigned int led,
-				 enum led_brightness brightness)
-{
-	led_set_status(led,
-			(brightness == LED_OFF) ?
-			TPACPI_LED_OFF :
-			(tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ?
-				TPACPI_LED_BLINK : TPACPI_LED_ON);
-}
-
 static void led_set_status_worker(struct work_struct *work)
 {
 	struct tpacpi_led_classdev *data =
 		container_of(work, struct tpacpi_led_classdev, work);
 
 	if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
-		led_sysfs_set_status(data->led, data->new_brightness);
+		led_set_status(data->led, data->new_state);
 }
 
 static void led_sysfs_set(struct led_classdev *led_cdev,
@@ -4866,7 +4863,13 @@
 	struct tpacpi_led_classdev *data = container_of(led_cdev,
 			     struct tpacpi_led_classdev, led_classdev);
 
-	data->new_brightness = brightness;
+	if (brightness == LED_OFF)
+		data->new_state = TPACPI_LED_OFF;
+	else if (tpacpi_led_state_cache[data->led] != TPACPI_LED_BLINK)
+		data->new_state = TPACPI_LED_ON;
+	else
+		data->new_state = TPACPI_LED_BLINK;
+
 	queue_work(tpacpi_wq, &data->work);
 }
 
@@ -4884,7 +4887,7 @@
 	} else if ((*delay_on != 500) || (*delay_off != 500))
 		return -EINVAL;
 
-	data->new_brightness = TPACPI_LED_BLINK;
+	data->new_state = TPACPI_LED_BLINK;
 	queue_work(tpacpi_wq, &data->work);
 
 	return 0;
@@ -7858,6 +7861,15 @@
 MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
 
 /*
+ * This will autoload the driver in almost every ThinkPad
+ * in widespread use.
+ *
+ * Only _VERY_ old models, like the 240, 240x and 570 lack
+ * the HKEY event interface.
+ */
+MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids);
+
+/*
  * DMI matching for module autoloading
  *
  * See http://thinkwiki.org/wiki/List_of_DMI_IDs
@@ -7869,18 +7881,13 @@
 #define IBM_BIOS_MODULE_ALIAS(__type) \
 	MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
 
-/* Non-ancient thinkpads */
-MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
-MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
-
 /* Ancient thinkpad BIOSes have to be identified by
  * BIOS type or model number, and there are far less
  * BIOS types than model numbers... */
-IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
-IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
-IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
+IBM_BIOS_MODULE_ALIAS("I[MU]");		/* 570, 570e */
 
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_AUTHOR("Borislav Deianov <borislav@users.sf.net>");
+MODULE_AUTHOR("Henrique de Moraes Holschuh <hmh@hmh.eng.br>");
 MODULE_DESCRIPTION(TPACPI_DESC);
 MODULE_VERSION(TPACPI_VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index ffe34a1..4e9851f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -573,7 +573,7 @@
 
 config RTC_DRV_SH
 	tristate "SuperH On-Chip RTC"
-	depends on RTC_CLASS && SUPERH
+	depends on RTC_CLASS && SUPERH && HAVE_CLK
 	help
 	  Say Y here to enable support for the on-chip RTC found in
 	  most SuperH processors.
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index b6d35f5..23e10b6 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -797,17 +797,15 @@
 		goto cleanup2;
 	}
 
-	pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n",
-			dev_name(&cmos_rtc.rtc->dev),
-			is_valid_irq(rtc_irq)
-				?  (cmos_rtc.mon_alrm
-					? "year"
-					: (cmos_rtc.day_alrm
-						? "month" : "day"))
-				: "no",
-			cmos_rtc.century ? ", y3k" : "",
-			nvram.size,
-			is_hpet_enabled() ? ", hpet irqs" : "");
+	pr_info("%s: %s%s, %zd bytes nvram%s\n",
+		dev_name(&cmos_rtc.rtc->dev),
+		!is_valid_irq(rtc_irq) ? "no alarms" :
+			cmos_rtc.mon_alrm ? "alarms up to one year" :
+			cmos_rtc.day_alrm ? "alarms up to one month" :
+			"alarms up to one day",
+		cmos_rtc.century ? ", y3k" : "",
+		nvram.size,
+		is_hpet_enabled() ? ", hpet irqs" : "");
 
 	return 0;
 
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 9b1ff12..d7310ad 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -1,7 +1,7 @@
 /*
  * SuperH On-Chip RTC Support
  *
- * Copyright (C) 2006, 2007, 2008  Paul Mundt
+ * Copyright (C) 2006 - 2009  Paul Mundt
  * Copyright (C) 2006  Jamie Lenehan
  * Copyright (C) 2008  Angelo Castello
  *
@@ -25,10 +25,11 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/log2.h>
+#include <linux/clk.h>
 #include <asm/rtc.h>
 
 #define DRV_NAME	"sh-rtc"
-#define DRV_VERSION	"0.2.1"
+#define DRV_VERSION	"0.2.2"
 
 #define RTC_REG(r)	((r) * rtc_reg_size)
 
@@ -87,16 +88,17 @@
 #define RCR2_START	0x01	/* Start bit               */
 
 struct sh_rtc {
-	void __iomem *regbase;
-	unsigned long regsize;
-	struct resource *res;
-	int alarm_irq;
-	int periodic_irq;
-	int carry_irq;
-	struct rtc_device *rtc_dev;
-	spinlock_t lock;
-	unsigned long capabilities;	/* See asm-sh/rtc.h for cap bits */
-	unsigned short periodic_freq;
+	void __iomem		*regbase;
+	unsigned long		regsize;
+	struct resource		*res;
+	int			alarm_irq;
+	int			periodic_irq;
+	int			carry_irq;
+	struct clk		*clk;
+	struct rtc_device	*rtc_dev;
+	spinlock_t		lock;
+	unsigned long		capabilities;	/* See asm/rtc.h for cap bits */
+	unsigned short		periodic_freq;
 };
 
 static int __sh_rtc_interrupt(struct sh_rtc *rtc)
@@ -294,10 +296,10 @@
 
 	tmp = readb(rtc->regbase + RCR1);
 
-	if (!enable)
-		tmp &= ~RCR1_AIE;
-	else
+	if (enable)
 		tmp |= RCR1_AIE;
+	else
+		tmp &= ~RCR1_AIE;
 
 	writeb(tmp, rtc->regbase + RCR1);
 
@@ -618,6 +620,7 @@
 {
 	if (!is_power_of_2(freq))
 		return -EINVAL;
+
 	return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq);
 }
 
@@ -637,7 +640,8 @@
 	struct sh_rtc *rtc;
 	struct resource *res;
 	struct rtc_time r;
-	int ret;
+	char clk_name[6];
+	int clk_id, ret;
 
 	rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
 	if (unlikely(!rtc))
@@ -652,6 +656,7 @@
 		dev_err(&pdev->dev, "No IRQ resource\n");
 		goto err_badres;
 	}
+
 	rtc->periodic_irq = ret;
 	rtc->carry_irq = platform_get_irq(pdev, 1);
 	rtc->alarm_irq = platform_get_irq(pdev, 2);
@@ -663,7 +668,7 @@
 		goto err_badres;
 	}
 
-	rtc->regsize = res->end - res->start + 1;
+	rtc->regsize = resource_size(res);
 
 	rtc->res = request_mem_region(res->start, rtc->regsize, pdev->name);
 	if (unlikely(!rtc->res)) {
@@ -677,6 +682,26 @@
 		goto err_badmap;
 	}
 
+	clk_id = pdev->id;
+	/* With a single device, the clock id is still "rtc0" */
+	if (clk_id < 0)
+		clk_id = 0;
+
+	snprintf(clk_name, sizeof(clk_name), "rtc%d", clk_id);
+
+	rtc->clk = clk_get(&pdev->dev, clk_name);
+	if (IS_ERR(rtc->clk)) {
+		/*
+		 * No error handling for rtc->clk intentionally, not all
+		 * platforms will have a unique clock for the RTC, and
+		 * the clk API can handle the struct clk pointer being
+		 * NULL.
+		 */
+		rtc->clk = NULL;
+	}
+
+	clk_enable(rtc->clk);
+
 	rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
 					   &sh_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc->rtc_dev)) {
@@ -759,6 +784,8 @@
 	return 0;
 
 err_unmap:
+	clk_disable(rtc->clk);
+	clk_put(rtc->clk);
 	iounmap(rtc->regbase);
 err_badmap:
 	release_resource(rtc->res);
@@ -780,6 +807,7 @@
 	sh_rtc_setcie(&pdev->dev, 0);
 
 	free_irq(rtc->periodic_irq, rtc);
+
 	if (rtc->carry_irq > 0) {
 		free_irq(rtc->carry_irq, rtc);
 		free_irq(rtc->alarm_irq, rtc);
@@ -789,6 +817,9 @@
 
 	iounmap(rtc->regbase);
 
+	clk_disable(rtc->clk);
+	clk_put(rtc->clk);
+
 	platform_set_drvdata(pdev, NULL);
 
 	kfree(rtc);
@@ -802,11 +833,11 @@
 	struct sh_rtc *rtc = platform_get_drvdata(pdev);
 
 	set_irq_wake(rtc->periodic_irq, enabled);
+
 	if (rtc->carry_irq > 0) {
 		set_irq_wake(rtc->carry_irq, enabled);
 		set_irq_wake(rtc->alarm_irq, enabled);
 	}
-
 }
 
 static int sh_rtc_suspend(struct device *dev)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 0570794..d181527 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/buffer_head.h>
 #include <linux/hdreg.h>
+#include <linux/async.h>
 
 #include <asm/ccwdev.h>
 #include <asm/ebcdic.h>
@@ -480,8 +481,10 @@
         if (rc && rc != -EAGAIN)
                 device->target = device->state;
 
-	if (device->state == device->target)
+	if (device->state == device->target) {
 		wake_up(&dasd_init_waitq);
+		dasd_put_device(device);
+	}
 
 	/* let user-space know that the device status changed */
 	kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE);
@@ -513,12 +516,15 @@
  */
 void dasd_set_target_state(struct dasd_device *device, int target)
 {
+	dasd_get_device(device);
 	/* If we are in probeonly mode stop at DASD_STATE_READY. */
 	if (dasd_probeonly && target > DASD_STATE_READY)
 		target = DASD_STATE_READY;
 	if (device->target != target) {
-                if (device->state == target)
+		if (device->state == target) {
 			wake_up(&dasd_init_waitq);
+			dasd_put_device(device);
+		}
 		device->target = target;
 	}
 	if (device->state != device->target)
@@ -2148,6 +2154,22 @@
  * SECTION: common functions for ccw_driver use
  */
 
+static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
+{
+	struct ccw_device *cdev = data;
+	int ret;
+
+	ret = ccw_device_set_online(cdev);
+	if (ret)
+		pr_warning("%s: Setting the DASD online failed with rc=%d\n",
+			   dev_name(&cdev->dev), ret);
+	else {
+		struct dasd_device *device = dasd_device_from_cdev(cdev);
+		wait_event(dasd_init_waitq, _wait_for_device(device));
+		dasd_put_device(device);
+	}
+}
+
 /*
  * Initial attempt at a probe function. this can be simplified once
  * the other detection code is gone.
@@ -2180,10 +2202,7 @@
 	 */
 	if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) ||
 	    (dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0))
-		ret = ccw_device_set_online(cdev);
-	if (ret)
-		pr_warning("%s: Setting the DASD online failed with rc=%d\n",
-		       dev_name(&cdev->dev), ret);
+		async_schedule(dasd_generic_auto_online, cdev);
 	return 0;
 }
 
@@ -2290,13 +2309,7 @@
 	} else
 		pr_debug("dasd_generic device %s found\n",
 				dev_name(&cdev->dev));
-
-	/* FIXME: we have to wait for the root device but we don't want
-	 * to wait for each single device but for all at once. */
-	wait_event(dasd_init_waitq, _wait_for_device(device));
-
 	dasd_put_device(device);
-
 	return rc;
 }
 
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 2125479..cb52da0 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2019,15 +2019,23 @@
 				ccw++;
 				recid += count;
 				new_track = 0;
+				/* first idaw for a ccw may start anywhere */
+				if (!idaw_dst)
+					idaw_dst = dst;
 			}
-			/* If we start a new idaw, everything is fine and the
-			 * start of the new idaw is the start of this segment.
+			/* If we start a new idaw, we must make sure that it
+			 * starts on an IDA_BLOCK_SIZE boundary.
 			 * If we continue an idaw, we must make sure that the
 			 * current segment begins where the so far accumulated
 			 * idaw ends
 			 */
-			if (!idaw_dst)
-				idaw_dst = dst;
+			if (!idaw_dst) {
+				if (__pa(dst) & (IDA_BLOCK_SIZE-1)) {
+					dasd_sfree_request(cqr, startdev);
+					return ERR_PTR(-ERANGE);
+				} else
+					idaw_dst = dst;
+			}
 			if ((idaw_dst + idaw_len) != dst) {
 				dasd_sfree_request(cqr, startdev);
 				return ERR_PTR(-ERANGE);
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index c07809c..5469e09 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -285,7 +285,7 @@
 extern void tape_state_set(struct tape_device *, enum tape_state);
 
 extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
-extern int tape_generic_offline(struct tape_device *device);
+extern int tape_generic_offline(struct ccw_device *);
 
 /* Externals from tape_devmap.c */
 extern int tape_generic_probe(struct ccw_device *);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 807ded5..5f8e8ef 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -1294,12 +1294,6 @@
 	);
 }
 
-static int
-tape_34xx_offline(struct ccw_device *cdev)
-{
-	return tape_generic_offline(cdev->dev.driver_data);
-}
-
 static struct ccw_driver tape_34xx_driver = {
 	.name = "tape_34xx",
 	.owner = THIS_MODULE,
@@ -1307,7 +1301,7 @@
 	.probe = tape_generic_probe,
 	.remove = tape_generic_remove,
 	.set_online = tape_34xx_online,
-	.set_offline = tape_34xx_offline,
+	.set_offline = tape_generic_offline,
 };
 
 static int
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index fc1d912..823b05b 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -1707,19 +1707,13 @@
 				   &tape_discipline_3590);
 }
 
-static int
-tape_3590_offline(struct ccw_device *cdev)
-{
-	return tape_generic_offline(cdev->dev.driver_data);
-}
-
 static struct ccw_driver tape_3590_driver = {
 	.name = "tape_3590",
 	.owner = THIS_MODULE,
 	.ids = tape_3590_ids,
 	.probe = tape_generic_probe,
 	.remove = tape_generic_remove,
-	.set_offline = tape_3590_offline,
+	.set_offline = tape_generic_offline,
 	.set_online = tape_3590_online,
 };
 
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 08c09d3..8a109f3 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -387,8 +387,11 @@
  * Manual offline is only allowed while the drive is not in use.
  */
 int
-tape_generic_offline(struct tape_device *device)
+tape_generic_offline(struct ccw_device *cdev)
 {
+	struct tape_device *device;
+
+	device = cdev->dev.driver_data;
 	if (!device) {
 		return -ENODEV;
 	}
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 9e8a291..accd957 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -881,42 +881,6 @@
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
 }
 
-static void qdio_call_shutdown(struct work_struct *work)
-{
-	struct ccw_device_private *priv;
-	struct ccw_device *cdev;
-
-	priv = container_of(work, struct ccw_device_private, kick_work);
-	cdev = priv->cdev;
-	qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
-	put_device(&cdev->dev);
-}
-
-static void qdio_int_error(struct ccw_device *cdev)
-{
-	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
-	switch (irq_ptr->state) {
-	case QDIO_IRQ_STATE_INACTIVE:
-	case QDIO_IRQ_STATE_CLEANUP:
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
-		break;
-	case QDIO_IRQ_STATE_ESTABLISHED:
-	case QDIO_IRQ_STATE_ACTIVE:
-		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
-		if (get_device(&cdev->dev)) {
-			/* Can't call shutdown from interrupt context. */
-			PREPARE_WORK(&cdev->private->kick_work,
-				     qdio_call_shutdown);
-			queue_work(ccw_device_work, &cdev->private->kick_work);
-		}
-		break;
-	default:
-		WARN_ON(1);
-	}
-	wake_up(&cdev->private->wait_q);
-}
-
 static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
 				       int dstat)
 {
@@ -973,10 +937,8 @@
 		switch (PTR_ERR(irb)) {
 		case -EIO:
 			DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
-			return;
-		case -ETIMEDOUT:
-			DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no);
-			qdio_int_error(cdev);
+			qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+			wake_up(&cdev->private->wait_q);
 			return;
 		default:
 			WARN_ON(1);
@@ -1001,7 +963,6 @@
 	case QDIO_IRQ_STATE_ACTIVE:
 		if (cstat & SCHN_STAT_PCI) {
 			qdio_int_handler_pci(irq_ptr);
-			/* no state change so no need to wake up wait_q */
 			return;
 		}
 		if ((cstat & ~SCHN_STAT_PCI) || dstat) {
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index e6d1fc8..a85ad05 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -383,18 +383,22 @@
 	return 0;
 }
 
-static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
-    unsigned long arg)
+static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
 {
+	lock_kernel();
 	int error = -ENOTTY;
 	void __user *argp = (void __user *)arg;
 
-	if (!capable(CAP_SYS_ADMIN))
+	if (!capable(CAP_SYS_ADMIN)) {
+		unlock_kernel();
 		return -EPERM;
+	}
 	switch (cmd) {
 	case JSFLASH_IDENT:
-		if (copy_to_user(argp, &jsf0.id, JSFIDSZ))
+		if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 	case JSFLASH_ERASE:
 		error = jsf_ioctl_erase(arg);
@@ -404,6 +408,7 @@
 		break;
 	}
 
+	unlock_kernel();
 	return error;
 }
 
@@ -439,7 +444,7 @@
 	.llseek =	jsf_lseek,
 	.read =		jsf_read,
 	.write =	jsf_write,
-	.ioctl =	jsf_ioctl,
+	.unlocked_ioctl =	jsf_ioctl,
 	.mmap =		jsf_mmap,
 	.open =		jsf_open,
 	.release =	jsf_release,
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 27993c3..2c56fd5 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -197,9 +197,8 @@
 static void uctrl_get_event_status(struct uctrl_driver *);
 static void uctrl_get_external_status(struct uctrl_driver *);
 
-static int
-uctrl_ioctl(struct inode *inode, struct file *file,
-	      unsigned int cmd, unsigned long arg)
+static long
+uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	switch (cmd) {
 		default:
@@ -226,7 +225,7 @@
 static const struct file_operations uctrl_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
-	.ioctl =	uctrl_ioctl,
+	.unlocked_ioctl =	uctrl_ioctl,
 	.open =		uctrl_open,
 };
 
diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c
index 61af3d9..e3519fa 100644
--- a/drivers/scsi/a4000t.c
+++ b/drivers/scsi/a4000t.c
@@ -129,7 +129,7 @@
 	a4000t_scsi_device = platform_device_register_simple("a4000t-scsi",
 			-1, NULL, 0);
 	if (IS_ERR(a4000t_scsi_device)) {
-		platform_driver_register(&a4000t_scsi_driver);
+		platform_driver_unregister(&a4000t_scsi_driver);
 		return PTR_ERR(a4000t_scsi_device);
 	}
 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index a14d245..6f51ca4 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -180,8 +180,6 @@
 	spin_unlock(&async_scan_lock);
 
 	kfree(data);
-	/* Synchronize async operations globally */
-	async_synchronize_full();
 	return 0;
 }
 
diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c
index 2f21af2..74708fc 100644
--- a/drivers/scsi/scsi_wait_scan.c
+++ b/drivers/scsi/scsi_wait_scan.c
@@ -11,10 +11,21 @@
  */
 
 #include <linux/module.h>
+#include <linux/device.h>
 #include <scsi/scsi_scan.h>
 
 static int __init wait_scan_init(void)
 {
+	/*
+	 * First we need to wait for device probing to finish;
+	 * the drivers we just loaded might just still be probing
+	 * and might not yet have reached the scsi async scanning
+	 */
+	wait_for_device_probe();
+	/*
+	 * and then we wait for the actual asynchronous scsi scan
+	 * to finish.
+	 */
 	scsi_complete_async_scans();
 	return 0;
 }
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 7ddff3f..938bc1b 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -771,8 +771,6 @@
 }
 
 /*
- * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
- *
  * These chips are available with optionally one parallel port and up to
  * two serial ports. Unfortunately they all have the same product id.
  *
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 18ba812..d86123e 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -166,7 +166,7 @@
 	struct tty_struct *tty = uart->port.info->port.tty;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
 		uart->scts = 0;
 		uart_handle_cts_change(&uart->port, uart->scts);
 	}
@@ -368,7 +368,7 @@
 	struct bfin_serial_port *uart = dev_id;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
 		uart->scts = 0;
 		uart_handle_cts_change(&uart->port, uart->scts);
 	}
@@ -504,7 +504,7 @@
 	struct circ_buf *xmit = &uart->port.info->xmit;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
-	if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
 		uart->scts = 0;
 		uart_handle_cts_change(&uart->port, uart->scts);
 	}
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 41ac948..e06686a 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -127,7 +127,7 @@
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 
 	if (tx_enabled(port)) {
-		disable_irq(ourport->tx_irq);
+		disable_irq_nosync(ourport->tx_irq);
 		tx_enabled(port) = 0;
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_enable(port);
@@ -154,7 +154,7 @@
 
 	if (rx_enabled(port)) {
 		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
-		disable_irq(ourport->rx_irq);
+		disable_irq_nosync(ourport->rx_irq);
 		rx_enabled(port) = 0;
 	}
 }
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index c1688c7..885194a 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -195,7 +195,7 @@
 	struct chip_data *chip = drv_data->cur_chip;
 
 	if (chip->cs_control) {
-		chip->cs_control(PXA2XX_CS_ASSERT);
+		chip->cs_control(PXA2XX_CS_DEASSERT);
 		return;
 	}
 
@@ -213,7 +213,7 @@
 		while (read_SSSR(reg) & SSSR_RNE) {
 			read_SSDR(reg);
 		}
-	} while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+	} while ((read_SSSR(reg) & SSSR_BSY) && --limit);
 	write_SSSR(SSSR_ROR, reg);
 
 	return limit;
@@ -484,7 +484,7 @@
 {
 	unsigned long limit = loops_per_jiffy << 1;
 
-	while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+	while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
 		cpu_relax();
 
 	return limit;
@@ -494,7 +494,7 @@
 {
 	unsigned long limit = loops_per_jiffy << 1;
 
-	while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+	while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
 		cpu_relax();
 
 	return limit;
@@ -1700,6 +1700,13 @@
 	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
+	if (drv_data->rx_channel != -1)
+		DRCMR(drv_data->ssp->drcmr_rx) =
+			DRCMR_MAPVLD | drv_data->rx_channel;
+	if (drv_data->tx_channel != -1)
+		DRCMR(drv_data->ssp->drcmr_tx) =
+			DRCMR_MAPVLD | drv_data->tx_channel;
+
 	/* Enable the SSP clock */
 	clk_enable(ssp->clk);
 
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 79e90fe..299d29d 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -41,6 +41,8 @@
 static struct proc_dir_entry *binder_proc_dir_entry_root;
 static struct proc_dir_entry *binder_proc_dir_entry_proc;
 static struct hlist_head binder_dead_nodes;
+static HLIST_HEAD(binder_deferred_list);
+static DEFINE_MUTEX(binder_deferred_lock);
 
 static int binder_read_proc_proc(
 	char *page, char **start, off_t off, int count, int *eof, void *data);
@@ -54,11 +56,7 @@
 #define SZ_4M                               0x400000
 #endif
 
-#ifndef __i386__
-#define FORBIDDEN_MMAP_FLAGS                (VM_WRITE | VM_EXEC)
-#else
 #define FORBIDDEN_MMAP_FLAGS                (VM_WRITE)
-#endif
 
 #define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64)
 
@@ -236,6 +234,12 @@
 	uint8_t data[0];
 };
 
+enum {
+	BINDER_DEFERRED_PUT_FILES    = 0x01,
+	BINDER_DEFERRED_FLUSH        = 0x02,
+	BINDER_DEFERRED_RELEASE      = 0x04,
+};
+
 struct binder_proc {
 	struct hlist_node proc_node;
 	struct rb_root threads;
@@ -245,8 +249,11 @@
 	int pid;
 	struct vm_area_struct *vma;
 	struct task_struct *tsk;
+	struct files_struct *files;
+	struct hlist_node deferred_work_node;
+	int deferred_work;
 	void *buffer;
-	size_t user_buffer_offset;
+	ptrdiff_t user_buffer_offset;
 
 	struct list_head buffers;
 	struct rb_root free_buffers;
@@ -310,12 +317,14 @@
 	uid_t	sender_euid;
 };
 
+static void binder_defer_work(struct binder_proc *proc, int defer);
+
 /*
  * copied from get_unused_fd_flags
  */
-int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
+int task_get_unused_fd_flags(struct binder_proc *proc, int flags)
 {
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	int fd, error;
 	struct fdtable *fdt;
 	unsigned long rlim_cur;
@@ -337,9 +346,9 @@
 	 * will limit the total number of files that can be opened.
 	 */
 	rlim_cur = 0;
-	if (lock_task_sighand(tsk, &irqs)) {
-		rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		unlock_task_sighand(tsk, &irqs);
+	if (lock_task_sighand(proc->tsk, &irqs)) {
+		rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
+		unlock_task_sighand(proc->tsk, &irqs);
 	}
 	if (fd >= rlim_cur)
 		goto out;
@@ -375,7 +384,6 @@
 
 out:
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 	return error;
 }
 
@@ -383,9 +391,9 @@
  * copied from fd_install
  */
 static void task_fd_install(
-	struct task_struct *tsk, unsigned int fd, struct file *file)
+	struct binder_proc *proc, unsigned int fd, struct file *file)
 {
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	struct fdtable *fdt;
 
 	if (files == NULL)
@@ -396,7 +404,6 @@
 	BUG_ON(fdt->fd[fd] != NULL);
 	rcu_assign_pointer(fdt->fd[fd], file);
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 }
 
 /*
@@ -413,10 +420,10 @@
 /*
  * copied from sys_close
  */
-static long task_close_fd(struct task_struct *tsk, unsigned int fd)
+static long task_close_fd(struct binder_proc *proc, unsigned int fd)
 {
 	struct file *filp;
-	struct files_struct *files = get_files_struct(tsk);
+	struct files_struct *files = proc->files;
 	struct fdtable *fdt;
 	int retval;
 
@@ -443,12 +450,10 @@
 		     retval == -ERESTART_RESTARTBLOCK))
 		retval = -EINTR;
 
-	put_files_struct(files);
 	return retval;
 
 out_unlock:
 	spin_unlock(&files->file_lock);
-	put_files_struct(files);
 	return -EBADF;
 }
 
@@ -618,7 +623,8 @@
 			       proc->pid, page_addr);
 			goto err_map_kernel_failed;
 		}
-		user_page_addr = (size_t)page_addr + proc->user_buffer_offset;
+		user_page_addr =
+			(uintptr_t)page_addr + proc->user_buffer_offset;
 		ret = vm_insert_page(vma, user_page_addr, page[0]);
 		if (ret) {
 			printk(KERN_ERR "binder: %d: binder_alloc_buf failed "
@@ -639,7 +645,7 @@
 	     page_addr -= PAGE_SIZE) {
 		page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
 		if (vma)
-			zap_page_range(vma, (size_t)page_addr +
+			zap_page_range(vma, (uintptr_t)page_addr +
 				proc->user_buffer_offset, PAGE_SIZE, NULL);
 err_vm_insert_page_failed:
 		unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
@@ -720,18 +726,19 @@
 		       "er %p size %zd\n", proc->pid, size, buffer, buffer_size);
 
 	has_page_addr =
-		(void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK);
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
 	if (n == NULL) {
 		if (size + sizeof(struct binder_buffer) + 4 >= buffer_size)
 			buffer_size = size; /* no room for other buffers */
 		else
 			buffer_size = size + sizeof(struct binder_buffer);
 	}
-	end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size);
+	end_page_addr =
+		(void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size);
 	if (end_page_addr > has_page_addr)
 		end_page_addr = has_page_addr;
 	if (binder_update_page_range(proc, 1,
-	    (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL))
+	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL))
 		return NULL;
 
 	rb_erase(best_fit, &proc->free_buffers);
@@ -762,12 +769,12 @@
 
 static void *buffer_start_page(struct binder_buffer *buffer)
 {
-	return (void *)((size_t)buffer & PAGE_MASK);
+	return (void *)((uintptr_t)buffer & PAGE_MASK);
 }
 
 static void *buffer_end_page(struct binder_buffer *buffer)
 {
-	return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK);
+	return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK);
 }
 
 static void binder_delete_free_buffer(
@@ -845,8 +852,8 @@
 	}
 
 	binder_update_page_range(proc, 0,
-		(void *)PAGE_ALIGN((size_t)buffer->data),
-		(void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK),
+		(void *)PAGE_ALIGN((uintptr_t)buffer->data),
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
 		NULL);
 	rb_erase(&buffer->rb_node, &proc->allocated_buffers);
 	buffer->free = 1;
@@ -1345,6 +1352,17 @@
 		if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
 			struct binder_transaction *tmp;
 			tmp = thread->transaction_stack;
+			if (tmp->to_thread != thread) {
+				binder_user_error("binder: %d:%d got new "
+					"transaction with bad transaction stack"
+					", transaction %d has target %d:%d\n",
+					proc->pid, thread->pid, tmp->debug_id,
+					tmp->to_proc ? tmp->to_proc->pid : 0,
+					tmp->to_thread ?
+					tmp->to_thread->pid : 0);
+				return_error = BR_FAILED_REPLY;
+				goto err_bad_call_stack;
+			}
 			while (tmp) {
 				if (tmp->from && tmp->from->proc == target_proc)
 					target_thread = tmp->from;
@@ -1434,10 +1452,19 @@
 		return_error = BR_FAILED_REPLY;
 		goto err_copy_data_failed;
 	}
+	if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) {
+		binder_user_error("binder: %d:%d got transaction with "
+			"invalid offsets size, %zd\n",
+			proc->pid, thread->pid, tr->offsets_size);
+		return_error = BR_FAILED_REPLY;
+		goto err_bad_offset;
+	}
 	off_end = (void *)offp + tr->offsets_size;
 	for (; offp < off_end; offp++) {
 		struct flat_binder_object *fp;
-		if (*offp > t->buffer->data_size - sizeof(*fp)) {
+		if (*offp > t->buffer->data_size - sizeof(*fp) ||
+		    t->buffer->data_size < sizeof(*fp) ||
+		    !IS_ALIGNED(*offp, sizeof(void *))) {
 			binder_user_error("binder: %d:%d got transaction with "
 				"invalid offset, %zd\n",
 				proc->pid, thread->pid, *offp);
@@ -1544,13 +1571,13 @@
 				return_error = BR_FAILED_REPLY;
 				goto err_fget_failed;
 			}
-			target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC);
+			target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC);
 			if (target_fd < 0) {
 				fput(file);
 				return_error = BR_FAILED_REPLY;
 				goto err_get_unused_fd_failed;
 			}
-			task_fd_install(target_proc->tsk, target_fd, file);
+			task_fd_install(target_proc, target_fd, file);
 			if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
 				printk(KERN_INFO "        fd %ld -> %d\n", fp->handle, target_fd);
 			/* TODO: fput? */
@@ -1655,7 +1682,9 @@
 		off_end = (void *)offp + buffer->offsets_size;
 	for (; offp < off_end; offp++) {
 		struct flat_binder_object *fp;
-		if (*offp > buffer->data_size - sizeof(*fp)) {
+		if (*offp > buffer->data_size - sizeof(*fp) ||
+		    buffer->data_size < sizeof(*fp) ||
+		    !IS_ALIGNED(*offp, sizeof(void *))) {
 			printk(KERN_ERR "binder: transaction release %d bad"
 					"offset %zd, size %zd\n", debug_id, *offp, buffer->data_size);
 			continue;
@@ -1691,7 +1720,7 @@
 			if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
 				printk(KERN_INFO "        fd %ld\n", fp->handle);
 			if (failed_at)
-				task_close_fd(proc->tsk, fp->handle);
+				task_close_fd(proc, fp->handle);
 			break;
 
 		default:
@@ -2340,7 +2369,7 @@
 
 		tr.data_size = t->buffer->data_size;
 		tr.offsets_size = t->buffer->offsets_size;
-		tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset);
+		tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset;
 		tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *));
 
 		if (put_user(cmd, (uint32_t __user *)ptr))
@@ -2656,6 +2685,7 @@
 			(unsigned long)pgprot_val(vma->vm_page_prot));
 	dump_stack();
 }
+
 static void binder_vma_close(struct vm_area_struct *vma)
 {
 	struct binder_proc *proc = vma->vm_private_data;
@@ -2666,6 +2696,7 @@
 			(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
 			(unsigned long)pgprot_val(vma->vm_page_prot));
 	proc->vma = NULL;
+	binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES);
 }
 
 static struct vm_operations_struct binder_vm_ops = {
@@ -2698,6 +2729,12 @@
 	}
 	vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
 
+	if (proc->buffer) {
+		ret = -EBUSY;
+		failure_string = "already mapped";
+		goto err_already_mapped;
+	}
+
 	area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
 	if (area == NULL) {
 		ret = -ENOMEM;
@@ -2705,7 +2742,7 @@
 		goto err_get_vm_area_failed;
 	}
 	proc->buffer = area->addr;
-	proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer;
+	proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
 
 #ifdef CONFIG_CPU_CACHE_VIPT
 	if (cache_is_vipt_aliasing()) {
@@ -2738,6 +2775,7 @@
 	binder_insert_free_buffer(proc, buffer);
 	proc->free_async_space = proc->buffer_size / 2;
 	barrier();
+	proc->files = get_files_struct(current);
 	proc->vma = vma;
 
 	/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
@@ -2745,10 +2783,12 @@
 
 err_alloc_small_buf_failed:
 	kfree(proc->pages);
+	proc->pages = NULL;
 err_alloc_pages_failed:
 	vfree(proc->buffer);
+	proc->buffer = NULL;
 err_get_vm_area_failed:
-	mutex_unlock(&binder_lock);
+err_already_mapped:
 err_bad_arg:
 	printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
 	return ret;
@@ -2780,6 +2820,7 @@
 	if (binder_proc_dir_entry_proc) {
 		char strbuf[11];
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
+		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
 		create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc);
 	}
 
@@ -2788,11 +2829,17 @@
 
 static int binder_flush(struct file *filp, fl_owner_t id)
 {
-	struct rb_node *n;
 	struct binder_proc *proc = filp->private_data;
-	int wake_count = 0;
 
-	mutex_lock(&binder_lock);
+	binder_defer_work(proc, BINDER_DEFERRED_FLUSH);
+
+	return 0;
+}
+
+static void binder_deferred_flush(struct binder_proc *proc)
+{
+	struct rb_node *n;
+	int wake_count = 0;
 	for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) {
 		struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node);
 		thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN;
@@ -2802,28 +2849,35 @@
 		}
 	}
 	wake_up_interruptible_all(&proc->wait);
-	mutex_unlock(&binder_lock);
 
 	if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
 		printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count);
-
-	return 0;
 }
 
 static int binder_release(struct inode *nodp, struct file *filp)
 {
-	struct hlist_node *pos;
-	struct binder_transaction *t;
-	struct rb_node *n;
 	struct binder_proc *proc = filp->private_data;
-	int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
-
 	if (binder_proc_dir_entry_proc) {
 		char strbuf[11];
 		snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
 		remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
 	}
-	mutex_lock(&binder_lock);
+
+	binder_defer_work(proc, BINDER_DEFERRED_RELEASE);
+
+	return 0;
+}
+
+static void binder_deferred_release(struct binder_proc *proc)
+{
+	struct hlist_node *pos;
+	struct binder_transaction *t;
+	struct rb_node *n;
+	int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
+
+	BUG_ON(proc->vma);
+	BUG_ON(proc->files);
+
 	hlist_del(&proc->proc_node);
 	if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) {
 		if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER)
@@ -2897,7 +2951,6 @@
 	}
 
 	binder_stats.obj_deleted[BINDER_STAT_PROC]++;
-	mutex_unlock(&binder_lock);
 
 	page_count = 0;
 	if (proc->pages) {
@@ -2921,7 +2974,57 @@
 		       proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
 
 	kfree(proc);
-	return 0;
+}
+
+static void binder_deferred_func(struct work_struct *work)
+{
+	struct binder_proc *proc;
+	struct files_struct *files;
+
+	int defer;
+	do {
+		mutex_lock(&binder_lock);
+		mutex_lock(&binder_deferred_lock);
+		if (!hlist_empty(&binder_deferred_list)) {
+			proc = hlist_entry(binder_deferred_list.first,
+					struct binder_proc, deferred_work_node);
+			hlist_del_init(&proc->deferred_work_node);
+			defer = proc->deferred_work;
+			proc->deferred_work = 0;
+		} else {
+			proc = NULL;
+			defer = 0;
+		}
+		mutex_unlock(&binder_deferred_lock);
+
+		files = NULL;
+		if (defer & BINDER_DEFERRED_PUT_FILES)
+			if ((files = proc->files))
+				proc->files = NULL;
+
+		if (defer & BINDER_DEFERRED_FLUSH)
+			binder_deferred_flush(proc);
+
+		if (defer & BINDER_DEFERRED_RELEASE)
+			binder_deferred_release(proc); /* frees proc */
+
+		mutex_unlock(&binder_lock);
+		if (files)
+			put_files_struct(files);
+	} while (proc);
+}
+static DECLARE_WORK(binder_deferred_work, binder_deferred_func);
+
+static void binder_defer_work(struct binder_proc *proc, int defer)
+{
+	mutex_lock(&binder_deferred_lock);
+	proc->deferred_work |= defer;
+	if (hlist_unhashed(&proc->deferred_work_node)) {
+		hlist_add_head(&proc->deferred_work_node,
+				&binder_deferred_list);
+		schedule_work(&binder_deferred_work);
+	}
+	mutex_unlock(&binder_deferred_lock);
 }
 
 static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t)
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
index 6f6e36a..c8af9a8 100644
--- a/drivers/staging/at76_usb/at76_usb.c
+++ b/drivers/staging/at76_usb/at76_usb.c
@@ -5259,6 +5259,18 @@
 	return 0;
 }
 
+static const struct net_device_ops at76_netdev_ops = {
+	.ndo_open		= at76_open,
+	.ndo_stop		= at76_stop,
+	.ndo_get_stats		= at76_get_stats,
+	.ndo_start_xmit		= at76_tx,
+	.ndo_tx_timeout		= at76_tx_timeout,
+	.ndo_set_multicast_list	= at76_set_multicast,
+	.ndo_set_mac_address	= at76_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 /* Register network device and initialize the hardware */
 static int at76_init_new_device(struct at76_priv *priv,
 				struct usb_interface *interface)
@@ -5303,21 +5315,15 @@
 	priv->scan_mode = SCAN_TYPE_ACTIVE;
 
 	netdev->flags &= ~IFF_MULTICAST;	/* not yet or never */
-	netdev->open = at76_open;
-	netdev->stop = at76_stop;
-	netdev->get_stats = at76_get_stats;
+	netdev->netdev_ops = &at76_netdev_ops;
 	netdev->ethtool_ops = &at76_ethtool_ops;
 
 	/* Add pointers to enable iwspy support. */
 	priv->wireless_data.spy_data = &priv->spy_data;
 	netdev->wireless_data = &priv->wireless_data;
 
-	netdev->hard_start_xmit = at76_tx;
-	netdev->tx_timeout = at76_tx_timeout;
 	netdev->watchdog_timeo = 2 * HZ;
 	netdev->wireless_handlers = &at76_handler_def;
-	netdev->set_multicast_list = at76_set_multicast;
-	netdev->set_mac_address = at76_set_mac_address;
 	dev_alloc_name(netdev, "wlan%d");
 
 	ret = register_netdev(priv->netdev);
diff --git a/drivers/staging/epl/VirtualEthernetLinux.c b/drivers/staging/epl/VirtualEthernetLinux.c
index 21206c4..077724a 100644
--- a/drivers/staging/epl/VirtualEthernetLinux.c
+++ b/drivers/staging/epl/VirtualEthernetLinux.c
@@ -284,6 +284,17 @@
 	return Ret;
 }
 
+static const struct net_device_ops epl_netdev_ops = {
+	.ndo_open		= VEthOpen,
+	.ndo_stop		= VEthClose,
+	.ndo_get_stats		= VEthGetStats,
+	.ndo_start_xmit		= VEthXmit,
+	.ndo_tx_timeout		= VEthTimeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
 {
 	tEplKernel Ret = kEplSuccessful;
@@ -299,11 +310,7 @@
 		goto Exit;
 	}
 
-	pVEthNetDevice_g->open = VEthOpen;
-	pVEthNetDevice_g->stop = VEthClose;
-	pVEthNetDevice_g->get_stats = VEthGetStats;
-	pVEthNetDevice_g->hard_start_xmit = VEthXmit;
-	pVEthNetDevice_g->tx_timeout = VEthTimeout;
+	pVEthNetDevice_g->netdev_ops = &epl_netdev_ops;
 	pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT;
 	pVEthNetDevice_g->destructor = free_netdev;
 
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index de65972..951c73d 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -112,6 +112,19 @@
 void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 
+static const struct net_device_ops et131x_netdev_ops = {
+	.ndo_open		= et131x_open,
+	.ndo_stop		= et131x_close,
+	.ndo_start_xmit		= et131x_tx,
+	.ndo_set_multicast_list	= et131x_multicast,
+	.ndo_tx_timeout		= et131x_tx_timeout,
+	.ndo_change_mtu		= et131x_change_mtu,
+	.ndo_set_mac_address	= et131x_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_get_stats		= et131x_stats,
+	.ndo_do_ioctl		= et131x_ioctl,
+};
+
 /**
  * et131x_device_alloc
  *
@@ -142,16 +155,8 @@
 	 */
 	//netdev->init               = &et131x_init;
 	//netdev->set_config = &et131x_config;
-	netdev->get_stats = &et131x_stats;
-	netdev->open = &et131x_open;
-	netdev->stop = &et131x_close;
-	netdev->do_ioctl = &et131x_ioctl;
-	netdev->set_multicast_list = &et131x_multicast;
-	netdev->hard_start_xmit = &et131x_tx;
-	netdev->tx_timeout = &et131x_tx_timeout;
 	netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
-	netdev->change_mtu = &et131x_change_mtu;
-	netdev->set_mac_address = &et131x_set_mac_addr;
+	netdev->netdev_ops = &et131x_netdev_ops;
 
 	//netdev->ethtool_ops        = &et131x_ethtool_ops;
 
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index 58bfc8d..77b1e76 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -191,8 +191,10 @@
 /*
  * Attempt to instantiate an I2C client by ID, probably loading a module.
  */
-static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr)
+static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
+			   int id, int addr)
 {
+	struct i2c_board_info info;
 	char *modname;
 
 	switch (id) {
@@ -226,7 +228,11 @@
 	}
 	if (modname != NULL)
 		request_module(modname);
-	if (wis_i2c_probe_device(adapter, id, addr) == 1)
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = addr;
+	strlcpy(info.type, type, I2C_NAME_SIZE);
+	if (!i2c_new_device(adapter, &info))
 		return 0;
 	if (modname != NULL)
 		printk(KERN_INFO
@@ -266,23 +272,9 @@
 	if (go->i2c_adapter_online) {
 		for (i = 0; i < go->board_info->num_i2c_devs; ++i)
 			init_i2c_module(&go->i2c_adapter,
+					go->board_info->i2c_devs[i].type,
 					go->board_info->i2c_devs[i].id,
 					go->board_info->i2c_devs[i].addr);
-#ifdef TUNER_SET_TYPE_ADDR
-		if (go->tuner_type >= 0) {
-			struct tuner_setup tun_setup = {
-				.mode_mask	= T_ANALOG_TV,
-				.addr		= ADDR_UNSET,
-				.type		= go->tuner_type
-			};
-			i2c_clients_command(&go->i2c_adapter,
-				TUNER_SET_TYPE_ADDR, &tun_setup);
-		}
-#else
-		if (go->tuner_type >= 0)
-			i2c_clients_command(&go->i2c_adapter,
-				TUNER_SET_TYPE, &go->tuner_type);
-#endif
 		if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
 			i2c_clients_command(&go->i2c_adapter,
 				DECODER_SET_CHANNEL, &go->channel_number);
diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/go7007/go7007-i2c.c
index cd55b76..c82867f 100644
--- a/drivers/staging/go7007/go7007-i2c.c
+++ b/drivers/staging/go7007/go7007-i2c.c
@@ -31,87 +31,6 @@
 #include "go7007-priv.h"
 #include "wis-i2c.h"
 
-/************** Registration interface for I2C client drivers **************/
-
-/* Since there's no way to auto-probe the I2C devices connected to the I2C
- * bus on the go7007, we have this silly little registration system that
- * client drivers can use to register their I2C driver ID and their
- * detect_client function (the one that's normally passed to i2c_probe).
- *
- * When a new go7007 device is connected, we can look up in a board info
- * table by the USB or PCI vendor/product/revision ID to determine
- * which I2C client module to load.  The client driver module will register
- * itself here, and then we can call the registered detect_client function
- * to force-load a new client at the address listed in the board info table.
- *
- * Really the I2C subsystem should have a way to force-load I2C client
- * drivers when we have a priori knowledge of what's on the bus, especially
- * since the existing I2C auto-probe mechanism is so hokey, but we'll use
- * our own mechanism for the time being. */
-
-struct wis_i2c_client_driver {
-	unsigned int id;
-	found_proc found_proc;
-	struct list_head list;
-};
-
-static LIST_HEAD(i2c_client_drivers);
-static DECLARE_MUTEX(i2c_client_driver_list_lock);
-
-/* Client drivers register here by their I2C driver ID */
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc)
-{
-	struct wis_i2c_client_driver *driver;
-
-	driver = kmalloc(sizeof(struct wis_i2c_client_driver), GFP_KERNEL);
-	if (driver == NULL)
-		return -ENOMEM;
-	driver->id = id;
-	driver->found_proc = found_proc;
-
-	down(&i2c_client_driver_list_lock);
-	list_add_tail(&driver->list, &i2c_client_drivers);
-	up(&i2c_client_driver_list_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(wis_i2c_add_driver);
-
-void wis_i2c_del_driver(found_proc found_proc)
-{
-	struct wis_i2c_client_driver *driver, *next;
-
-	down(&i2c_client_driver_list_lock);
-	list_for_each_entry_safe(driver, next, &i2c_client_drivers, list)
-		if (driver->found_proc == found_proc) {
-			list_del(&driver->list);
-			kfree(driver);
-		}
-	up(&i2c_client_driver_list_lock);
-}
-EXPORT_SYMBOL(wis_i2c_del_driver);
-
-/* The main go7007 driver calls this to instantiate a client by driver
- * ID and bus address, which are both stored in the board info table */
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
-				unsigned int id, int addr)
-{
-	struct wis_i2c_client_driver *driver;
-	int found = 0;
-
-	if (addr < 0 || addr > 0x7f)
-		return -1;
-	down(&i2c_client_driver_list_lock);
-	list_for_each_entry(driver, &i2c_client_drivers, list)
-		if (driver->id == id) {
-			if (driver->found_proc(adapter, addr, 0) == 0)
-				found = 1;
-			break;
-		}
-	up(&i2c_client_driver_list_lock);
-	return found;
-}
-
 /********************* Driver for on-board I2C adapter *********************/
 
 /* #define GO7007_I2C_DEBUG */
@@ -287,9 +206,7 @@
 
 static struct i2c_adapter go7007_adap_templ = {
 	.owner			= THIS_MODULE,
-	.class			= I2C_CLASS_TV_ANALOG,
 	.name			= "WIS GO7007SB",
-	.id			= I2C_ALGO_GO7007,
 	.algo			= &go7007_algo,
 };
 
diff --git a/drivers/staging/go7007/go7007-priv.h b/drivers/staging/go7007/go7007-priv.h
index 372f1f1..178d181 100644
--- a/drivers/staging/go7007/go7007-priv.h
+++ b/drivers/staging/go7007/go7007-priv.h
@@ -87,6 +87,7 @@
 	int audio_main_div;
 	int num_i2c_devs;
 	struct {
+		const char *type;
 		int id;
 		int addr;
 	} i2c_devs[4];
diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c
index 83eec92..aa4a9e0 100644
--- a/drivers/staging/go7007/go7007-usb.c
+++ b/drivers/staging/go7007/go7007-usb.c
@@ -91,6 +91,7 @@
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7115",
 				.id	= I2C_DRIVERID_WIS_SAA7115,
 				.addr	= 0x20,
 			},
@@ -127,6 +128,7 @@
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7113",
 				.id	= I2C_DRIVERID_WIS_SAA7113,
 				.addr	= 0x25,
 			},
@@ -164,6 +166,7 @@
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7115",
 				.id	= I2C_DRIVERID_WIS_SAA7115,
 				.addr	= 0x20,
 			},
@@ -209,14 +212,17 @@
 		.num_i2c_devs	 = 3,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_saa7115",
 				.id	= I2C_DRIVERID_WIS_SAA7115,
 				.addr	= 0x20,
 			},
 			{
+				.type	= "wis_uda1342",
 				.id	= I2C_DRIVERID_WIS_UDA1342,
 				.addr	= 0x1a,
 			},
 			{
+				.type	= "wis_sony_tuner",
 				.id	= I2C_DRIVERID_WIS_SONY_TUNER,
 				.addr	= 0x60,
 			},
@@ -264,6 +270,7 @@
 		.num_i2c_devs	  = 1,
 		.i2c_devs	  = {
 			{
+				.type	= "wis_ov7640",
 				.id	= I2C_DRIVERID_WIS_OV7640,
 				.addr	= 0x21,
 			},
@@ -296,6 +303,7 @@
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_tw9903",
 				.id	= I2C_DRIVERID_WIS_TW9903,
 				.addr	= 0x44,
 			},
@@ -385,6 +393,7 @@
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "wis_twTW2804",
 				.id	= I2C_DRIVERID_WIS_TW2804,
 				.addr	= 0x00, /* yes, really */
 			},
@@ -415,8 +424,9 @@
 		.num_i2c_devs	 = 1,
 		.i2c_devs	 = {
 			{
+				.type	= "s2250_board",
 				.id	= I2C_DRIVERID_S2250,
-				.addr	= 0x34,
+				.addr	= 0x43,
 			},
 		},
 		.num_inputs	 = 2,
@@ -943,9 +953,7 @@
 
 static struct i2c_adapter go7007_usb_adap_templ = {
 	.owner			= THIS_MODULE,
-	.class			= I2C_CLASS_TV_ANALOG,
 	.name			= "WIS GO7007SB EZ-USB",
-	.id			= I2C_ALGO_GO7007_USB,
 	.algo			= &go7007_usb_algo,
 };
 
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c
index d333ea2..1706fbf 100644
--- a/drivers/staging/go7007/s2250-board.c
+++ b/drivers/staging/go7007/s2250-board.c
@@ -28,7 +28,6 @@
 extern void s2250loader_cleanup(void);
 
 #define TLV320_ADDRESS      0x34
-#define S2250_VIDDEC        0x86
 #define VPX322_ADDR_ANALOGCONTROL1	0x02
 #define VPX322_ADDR_BRIGHTNESS0		0x0127
 #define VPX322_ADDR_BRIGHTNESS1		0x0131
@@ -123,6 +122,7 @@
 	int hue;
 	int reg12b_val;
 	int audio_input;
+	struct i2c_client *audio;
 };
 
 /* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/
@@ -452,16 +452,15 @@
 	{
 		struct v4l2_audio *audio = arg;
 
-		client->addr = TLV320_ADDRESS;
 		switch (audio->index) {
 		case 0:
-			write_reg(client, 0x08, 0x02); /* Line In */
+			write_reg(dec->audio, 0x08, 0x02); /* Line In */
 			break;
 		case 1:
-			write_reg(client, 0x08, 0x04); /* Mic */
+			write_reg(dec->audio, 0x08, 0x04); /* Mic */
 			break;
 		case 2:
-			write_reg(client, 0x08, 0x05); /* Mic Boost */
+			write_reg(dec->audio, 0x08, 0x05); /* Mic Boost */
 			break;
 		default:
 			return -EINVAL;
@@ -477,31 +476,23 @@
 	return 0;
 }
 
-static struct i2c_driver s2250_driver;
-
-static struct i2c_client s2250_client_templ = {
-	.name		= "Sensoray 2250",
-	.driver		= &s2250_driver,
-};
-
-static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int s2250_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_client *audio;
+	struct i2c_adapter *adapter = client->adapter;
 	struct s2250 *dec;
 	u8 *data;
 	struct go7007 *go = i2c_get_adapdata(adapter);
 	struct go7007_usb *usb = go->hpi_context;
 
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
+	audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1);
+	if (audio == NULL)
 		return -ENOMEM;
-	memcpy(client, &s2250_client_templ,
-	       sizeof(s2250_client_templ));
-	client->adapter = adapter;
 
 	dec = kmalloc(sizeof(struct s2250), GFP_KERNEL);
 	if (dec == NULL) {
-		kfree(client);
+		i2c_unregister_device(audio);
 		return -ENOMEM;
 	}
 
@@ -510,7 +501,7 @@
 	dec->contrast = 50;
 	dec->saturation = 50;
 	dec->hue = 0;
-	client->addr = TLV320_ADDRESS;
+	dec->audio = audio;
 	i2c_set_clientdata(client, dec);
 
 	printk(KERN_DEBUG
@@ -518,28 +509,25 @@
 	       adapter->name);
 
 	/* initialize the audio */
-	client->addr = TLV320_ADDRESS;
-	if (write_regs(client, aud_regs) < 0) {
+	if (write_regs(audio, aud_regs) < 0) {
 		printk(KERN_ERR
 		       "s2250: error initializing audio\n");
-		kfree(client);
+		i2c_unregister_device(audio);
 		kfree(dec);
 		return 0;
 	}
-	client->addr = S2250_VIDDEC;
-	i2c_set_clientdata(client, dec);
 
 	if (write_regs(client, vid_regs) < 0) {
 		printk(KERN_ERR
 		       "s2250: error initializing decoder\n");
-		kfree(client);
+		i2c_unregister_device(audio);
 		kfree(dec);
 		return 0;
 	}
 	if (write_regs_fp(client, vid_regs_fp) < 0) {
 		printk(KERN_ERR
 		       "s2250: error initializing decoder\n");
-		kfree(client);
+		i2c_unregister_device(audio);
 		kfree(dec);
 		return 0;
 	}
@@ -575,32 +563,33 @@
 		up(&usb->i2c_lock);
 	}
 
-	i2c_attach_client(client);
 	printk("s2250: initialized successfully\n");
 	return 0;
 }
 
-static int s2250_detach(struct i2c_client *client)
+static int s2250_remove(struct i2c_client *client)
 {
 	struct s2250 *dec = i2c_get_clientdata(client);
-	int r;
 
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
+	i2c_unregister_device(dec->audio);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id s2250_id[] = {
+	{ "s2250_board", 0 },
+	{ }
+};
+
 static struct i2c_driver s2250_driver = {
 	.driver = {
 		.name	= "Sensoray 2250 board driver",
 	},
-	.id		= I2C_DRIVERID_S2250,
-	.detach_client	= s2250_detach,
+	.probe		= s2250_probe,
+	.remove		= s2250_remove,
 	.command	= s2250_command,
+	.id_table	= s2250_id,
 };
 
 static int __init s2250_init(void)
@@ -613,13 +602,13 @@
 
 	r = i2c_add_driver(&s2250_driver);
 	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(s2250_driver.id, s2250_detect);
+		s2250loader_cleanup();
+
+	return r;
 }
 
 static void __exit s2250_cleanup(void)
 {
-	wis_i2c_del_driver(s2250_detect);
 	i2c_del_driver(&s2250_driver);
 
 	s2250loader_cleanup();
diff --git a/drivers/staging/go7007/wis-i2c.h b/drivers/staging/go7007/wis-i2c.h
index 431f41d..3c2b9be 100644
--- a/drivers/staging/go7007/wis-i2c.h
+++ b/drivers/staging/go7007/wis-i2c.h
@@ -24,21 +24,12 @@
 #define	I2C_DRIVERID_WIS_OV7640		0xf0f5
 #define	I2C_DRIVERID_WIS_TW2804		0xf0f6
 #define	I2C_DRIVERID_S2250		0xf0f7
-#define	I2C_ALGO_GO7007			0xf00000
-#define	I2C_ALGO_GO7007_USB		0xf10000
 
 /* Flag to indicate that the client needs to be accessed with SCCB semantics */
 /* We re-use the I2C_M_TEN value so the flag passes through the masks in the
  * core I2C code.  Major kludge, but the I2C layer ain't exactly flexible. */
 #define	I2C_CLIENT_SCCB			0x10
 
-typedef int (*found_proc) (struct i2c_adapter *, int, int);
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc);
-void wis_i2c_del_driver(found_proc found_proc);
-
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
-				unsigned int id, int addr);
-
 /* Definitions for new video decoder commands */
 
 struct video_decoder_resolution {
diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/go7007/wis-ov7640.c
index 2f9efca..04d6d3a 100644
--- a/drivers/staging/go7007/wis-ov7640.c
+++ b/drivers/staging/go7007/wis-ov7640.c
@@ -50,76 +50,54 @@
 	return 0;
 }
 
-static struct i2c_driver wis_ov7640_driver;
-
-static struct i2c_client wis_ov7640_client_templ = {
-	.name		= "OV7640 (WIS)",
-	.driver		= &wis_ov7640_driver,
-};
-
-static int wis_ov7640_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_ov7640_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
+		return -ENODEV;
 
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_ov7640_client_templ,
-			sizeof(wis_ov7640_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
 	client->flags = I2C_CLIENT_SCCB;
 
 	printk(KERN_DEBUG
 		"wis-ov7640: initializing OV7640 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR "wis-ov7640: error initializing OV7640\n");
-		kfree(client);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_ov7640_detach(struct i2c_client *client)
+static int wis_ov7640_remove(struct i2c_client *client)
 {
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
 	return 0;
 }
 
+static struct i2c_device_id wis_ov7640_id[] = {
+	{ "wis_ov7640", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_ov7640_driver = {
 	.driver = {
 		.name	= "WIS OV7640 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_OV7640,
-	.detach_client	= wis_ov7640_detach,
+	.probe		= wis_ov7640_probe,
+	.remove		= wis_ov7640_remove,
+	.id_table	= wis_ov7640_id,
 };
 
 static int __init wis_ov7640_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_ov7640_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_ov7640_driver.id, wis_ov7640_detect);
+	return i2c_add_driver(&wis_ov7640_driver);
 }
 
 static void __exit wis_ov7640_cleanup(void)
 {
-	wis_i2c_del_driver(wis_ov7640_detect);
 	i2c_del_driver(&wis_ov7640_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c
index 1168972..9ab893b 100644
--- a/drivers/staging/go7007/wis-saa7113.c
+++ b/drivers/staging/go7007/wis-saa7113.c
@@ -261,34 +261,19 @@
 	return 0;
 }
 
-static struct i2c_driver wis_saa7113_driver;
-
-static struct i2c_client wis_saa7113_client_templ = {
-	.name		= "SAA7113 (WIS)",
-	.driver		= &wis_saa7113_driver,
-};
-
-static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7113_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_saa7113 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_saa7113_client_templ,
-			sizeof(wis_saa7113_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_saa7113), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 128;
 	dec->contrast = 71;
@@ -298,56 +283,49 @@
 
 	printk(KERN_DEBUG
 		"wis-saa7113: initializing SAA7113 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR
 			"wis-saa7113: error initializing SAA7113\n");
-		kfree(client);
 		kfree(dec);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_saa7113_detach(struct i2c_client *client)
+static int wis_saa7113_remove(struct i2c_client *client)
 {
 	struct wis_saa7113 *dec = i2c_get_clientdata(client);
-	int r;
 
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_saa7113_id[] = {
+	{ "wis_saa7113", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_saa7113_driver = {
 	.driver = {
 		.name	= "WIS SAA7113 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_SAA7113,
-	.detach_client	= wis_saa7113_detach,
+	.probe		= wis_saa7113_probe,
+	.remove		= wis_saa7113_remove,
 	.command	= wis_saa7113_command,
+	.id_table	= wis_saa7113_id,
 };
 
 static int __init wis_saa7113_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_saa7113_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_saa7113_driver.id, wis_saa7113_detect);
+	return i2c_add_driver(&wis_saa7113_driver);
 }
 
 static void __exit wis_saa7113_cleanup(void)
 {
-	wis_i2c_del_driver(wis_saa7113_detect);
 	i2c_del_driver(&wis_saa7113_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c
index 59417a7..8687ad2 100644
--- a/drivers/staging/go7007/wis-saa7115.c
+++ b/drivers/staging/go7007/wis-saa7115.c
@@ -394,34 +394,19 @@
 	return 0;
 }
 
-static struct i2c_driver wis_saa7115_driver;
-
-static struct i2c_client wis_saa7115_client_templ = {
-	.name		= "SAA7115 (WIS)",
-	.driver		= &wis_saa7115_driver,
-};
-
-static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7115_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_saa7115 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_saa7115_client_templ,
-			sizeof(wis_saa7115_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_saa7115), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 128;
 	dec->contrast = 64;
@@ -431,56 +416,49 @@
 
 	printk(KERN_DEBUG
 		"wis-saa7115: initializing SAA7115 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR
 			"wis-saa7115: error initializing SAA7115\n");
-		kfree(client);
 		kfree(dec);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_saa7115_detach(struct i2c_client *client)
+static int wis_saa7115_remove(struct i2c_client *client)
 {
 	struct wis_saa7115 *dec = i2c_get_clientdata(client);
-	int r;
 
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_saa7115_id[] = {
+	{ "wis_saa7115", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_saa7115_driver = {
 	.driver = {
 		.name	= "WIS SAA7115 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_SAA7115,
-	.detach_client	= wis_saa7115_detach,
+	.probe		= wis_saa7115_probe,
+	.remove		= wis_saa7115_remove,
 	.command	= wis_saa7115_command,
+	.id_table	= wis_saa7115_id,
 };
 
 static int __init wis_saa7115_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_saa7115_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_saa7115_driver.id, wis_saa7115_detect);
+	return i2c_add_driver(&wis_saa7115_driver);
 }
 
 static void __exit wis_saa7115_cleanup(void)
 {
-	wis_i2c_del_driver(wis_saa7115_detect);
 	i2c_del_driver(&wis_saa7115_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c
index 58fddb1..c965c60 100644
--- a/drivers/staging/go7007/wis-sony-tuner.c
+++ b/drivers/staging/go7007/wis-sony-tuner.c
@@ -386,6 +386,7 @@
 	struct wis_sony_tuner *t = i2c_get_clientdata(client);
 
 	switch (cmd) {
+#if 0
 #ifdef TUNER_SET_TYPE_ADDR
 	case TUNER_SET_TYPE_ADDR:
 	{
@@ -463,6 +464,7 @@
 				t->type, sony_tuners[t->type - 200].name);
 		break;
 	}
+#endif
 	case VIDIOC_G_FREQUENCY:
 	{
 		struct v4l2_frequency *f = arg;
@@ -651,35 +653,19 @@
 	return 0;
 }
 
-static struct i2c_driver wis_sony_tuner_driver;
-
-static struct i2c_client wis_sony_tuner_client_templ = {
-	.name		= "Sony TV Tuner (WIS)",
-	.driver		= &wis_sony_tuner_driver,
-};
-
-static int wis_sony_tuner_detect(struct i2c_adapter *adapter,
-					int addr, int kind)
+static int wis_sony_tuner_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_sony_tuner *t;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_sony_tuner_client_templ,
-			sizeof(wis_sony_tuner_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	t = kmalloc(sizeof(struct wis_sony_tuner), GFP_KERNEL);
-	if (t == NULL) {
-		kfree(client);
+	if (t == NULL)
 		return -ENOMEM;
-	}
+
 	t->type = -1;
 	t->freq = 0;
 	t->mpxmode = 0;
@@ -688,50 +674,42 @@
 
 	printk(KERN_DEBUG
 		"wis-sony-tuner: initializing tuner at address %d on %s\n",
-		addr, adapter->name);
-
-	i2c_attach_client(client);
+		client->addr, adapter->name);
 
 	return 0;
 }
 
-static int wis_sony_tuner_detach(struct i2c_client *client)
+static int wis_sony_tuner_remove(struct i2c_client *client)
 {
 	struct wis_sony_tuner *t = i2c_get_clientdata(client);
-	int r;
 
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
+	i2c_set_clientdata(client, NULL);
 	kfree(t);
-	kfree(client);
 	return 0;
 }
 
+static struct i2c_device_id wis_sony_tuner_id[] = {
+	{ "wis_sony_tuner", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_sony_tuner_driver = {
 	.driver = {
 		.name	= "WIS Sony TV Tuner I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_SONY_TUNER,
-	.detach_client	= wis_sony_tuner_detach,
+	.probe		= wis_sony_tuner_probe,
+	.remove		= wis_sony_tuner_remove,
 	.command	= tuner_command,
+	.id_table	= wis_sony_tuner_id,
 };
 
 static int __init wis_sony_tuner_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_sony_tuner_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_sony_tuner_driver.id,
-					wis_sony_tuner_detect);
+	return i2c_add_driver(&wis_sony_tuner_driver);
 }
 
 static void __exit wis_sony_tuner_cleanup(void)
 {
-	wis_i2c_del_driver(wis_sony_tuner_detect);
 	i2c_del_driver(&wis_sony_tuner_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c
index 57b8f2b..e15794a 100644
--- a/drivers/staging/go7007/wis-tw2804.c
+++ b/drivers/staging/go7007/wis-tw2804.c
@@ -291,34 +291,19 @@
 	return 0;
 }
 
-static struct i2c_driver wis_tw2804_driver;
-
-static struct i2c_client wis_tw2804_client_templ = {
-	.name		= "TW2804 (WIS)",
-	.driver		= &wis_tw2804_driver,
-};
-
-static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw2804_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_tw2804 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_tw2804_client_templ,
-			sizeof(wis_tw2804_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->channel = -1;
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 128;
@@ -328,48 +313,42 @@
 	i2c_set_clientdata(client, dec);
 
 	printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_tw2804_detach(struct i2c_client *client)
+static int wis_tw2804_remove(struct i2c_client *client)
 {
 	struct wis_tw2804 *dec = i2c_get_clientdata(client);
-	int r;
 
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_tw2804_id[] = {
+	{ "wis_tw2804", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_tw2804_driver = {
 	.driver = {
 		.name	= "WIS TW2804 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_TW2804,
-	.detach_client	= wis_tw2804_detach,
+	.probe		= wis_tw2804_probe,
+	.remove		= wis_tw2804_remove,
 	.command	= wis_tw2804_command,
+	.id_table	= wis_tw2804_id,
 };
 
 static int __init wis_tw2804_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_tw2804_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_tw2804_driver.id, wis_tw2804_detect);
+	return i2c_add_driver(&wis_tw2804_driver);
 }
 
 static void __exit wis_tw2804_cleanup(void)
 {
-	wis_i2c_del_driver(wis_tw2804_detect);
 	i2c_del_driver(&wis_tw2804_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c
index 40627b2..6c3427b 100644
--- a/drivers/staging/go7007/wis-tw9903.c
+++ b/drivers/staging/go7007/wis-tw9903.c
@@ -267,34 +267,19 @@
 	return 0;
 }
 
-static struct i2c_driver wis_tw9903_driver;
-
-static struct i2c_client wis_tw9903_client_templ = {
-	.name		= "TW9903 (WIS)",
-	.driver		= &wis_tw9903_driver,
-};
-
-static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw9903_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 	struct wis_tw9903 *dec;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_tw9903_client_templ,
-			sizeof(wis_tw9903_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	dec = kmalloc(sizeof(struct wis_tw9903), GFP_KERNEL);
-	if (dec == NULL) {
-		kfree(client);
+	if (dec == NULL)
 		return -ENOMEM;
-	}
+
 	dec->norm = V4L2_STD_NTSC;
 	dec->brightness = 0;
 	dec->contrast = 0x60;
@@ -303,55 +288,48 @@
 
 	printk(KERN_DEBUG
 		"wis-tw9903: initializing TW9903 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	if (write_regs(client, initial_registers) < 0) {
 		printk(KERN_ERR "wis-tw9903: error initializing TW9903\n");
-		kfree(client);
 		kfree(dec);
-		return 0;
+		return -ENODEV;
 	}
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_tw9903_detach(struct i2c_client *client)
+static int wis_tw9903_remove(struct i2c_client *client)
 {
 	struct wis_tw9903 *dec = i2c_get_clientdata(client);
-	int r;
 
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
+	i2c_set_clientdata(client, NULL);
 	kfree(dec);
 	return 0;
 }
 
+static struct i2c_device_id wis_tw9903_id[] = {
+	{ "wis_tw9903", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_tw9903_driver = {
 	.driver = {
 		.name	= "WIS TW9903 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_TW9903,
-	.detach_client	= wis_tw9903_detach,
+	.probe		= wis_tw9903_probe,
+	.remove		= wis_tw9903_remove,
 	.command	= wis_tw9903_command,
+	.id_table	= wis_tw9903_id,
 };
 
 static int __init wis_tw9903_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_tw9903_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_tw9903_driver.id, wis_tw9903_detect);
+	return i2c_add_driver(&wis_tw9903_driver);
 }
 
 static void __exit wis_tw9903_cleanup(void)
 {
-	wis_i2c_del_driver(wis_tw9903_detect);
 	i2c_del_driver(&wis_tw9903_driver);
 }
 
diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/go7007/wis-uda1342.c
index 555645c..739c7ae 100644
--- a/drivers/staging/go7007/wis-uda1342.c
+++ b/drivers/staging/go7007/wis-uda1342.c
@@ -59,73 +59,51 @@
 	return 0;
 }
 
-static struct i2c_driver wis_uda1342_driver;
-
-static struct i2c_client wis_uda1342_client_templ = {
-	.name		= "UDA1342 (WIS)",
-	.driver		= &wis_uda1342_driver,
-};
-
-static int wis_uda1342_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_uda1342_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
 {
-	struct i2c_client *client;
+	struct i2c_adapter *adapter = client->adapter;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return 0;
-
-	client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (client == NULL)
-		return -ENOMEM;
-	memcpy(client, &wis_uda1342_client_templ,
-			sizeof(wis_uda1342_client_templ));
-	client->adapter = adapter;
-	client->addr = addr;
+		return -ENODEV;
 
 	printk(KERN_DEBUG
 		"wis-uda1342: initializing UDA1342 at address %d on %s\n",
-		addr, adapter->name);
+		client->addr, adapter->name);
 
 	write_reg(client, 0x00, 0x8000); /* reset registers */
 	write_reg(client, 0x00, 0x1241); /* select input 1 */
 
-	i2c_attach_client(client);
 	return 0;
 }
 
-static int wis_uda1342_detach(struct i2c_client *client)
+static int wis_uda1342_remove(struct i2c_client *client)
 {
-	int r;
-
-	r = i2c_detach_client(client);
-	if (r < 0)
-		return r;
-
-	kfree(client);
 	return 0;
 }
 
+static struct i2c_device_id wis_uda1342_id[] = {
+	{ "wis_uda1342", 0 },
+	{ }
+};
+
 static struct i2c_driver wis_uda1342_driver = {
 	.driver = {
 		.name	= "WIS UDA1342 I2C driver",
 	},
-	.id		= I2C_DRIVERID_WIS_UDA1342,
-	.detach_client	= wis_uda1342_detach,
+	.probe		= wis_uda1342_probe,
+	.remove		= wis_uda1342_remove,
 	.command	= wis_uda1342_command,
+	.id_table	= wis_uda1342_id,
 };
 
 static int __init wis_uda1342_init(void)
 {
-	int r;
-
-	r = i2c_add_driver(&wis_uda1342_driver);
-	if (r < 0)
-		return r;
-	return wis_i2c_add_driver(wis_uda1342_driver.id, wis_uda1342_detect);
+	return i2c_add_driver(&wis_uda1342_driver);
 }
 
 static void __exit wis_uda1342_cleanup(void)
 {
-	wis_i2c_del_driver(wis_uda1342_detect);
 	i2c_del_driver(&wis_uda1342_driver);
 }
 
diff --git a/drivers/staging/line6/audio.c b/drivers/staging/line6/audio.c
index 3aa9468..e2ac8d6 100644
--- a/drivers/staging/line6/audio.c
+++ b/drivers/staging/line6/audio.c
@@ -27,11 +27,12 @@
 {
 	static int dev;
 	struct snd_card *card;
+	int err;
 
-	card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0);
-
-	if (card == NULL)
-		return -ENOMEM;
+	err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0,
+			      &card);
+	if (err < 0)
+		return err;
 
 	line6->card = card;
 
diff --git a/drivers/staging/otus/usbdrv.c b/drivers/staging/otus/usbdrv.c
index 565a839..540cbbb 100644
--- a/drivers/staging/otus/usbdrv.c
+++ b/drivers/staging/otus/usbdrv.c
@@ -822,6 +822,21 @@
     return 0;
 }
 
+static const struct net_device_ops vap_netdev_ops = {
+	.ndo_open		= zfLnxVapOpen,
+	.ndo_stop		= zfLnxVapClose,
+	.ndo_start_xmit		= zfLnxVapXmitFrame,
+	.ndo_get_stats		= usbdrv_get_stats,
+	.ndo_change_mtu		= usbdrv_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+#ifdef ZM_HOSTAPD_SUPPORT
+	.ndo_do_ioctl		= usbdrv_ioctl,
+#else
+	.ndo_do_ioctl		= NULL,
+#endif
+};
+
 int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
 {
     /* Allocate net device structure */
@@ -846,16 +861,7 @@
     vap[vapId].dev->ml_priv = parentDev->ml_priv;
 
     //dev->hard_start_xmit = &zd1212_wds_xmit_frame;
-    vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame;
-    vap[vapId].dev->open = &zfLnxVapOpen;
-    vap[vapId].dev->stop = &zfLnxVapClose;
-    vap[vapId].dev->get_stats = &usbdrv_get_stats;
-    vap[vapId].dev->change_mtu = &usbdrv_change_mtu;
-#ifdef ZM_HOSTAPD_SUPPORT
-    vap[vapId].dev->do_ioctl = usbdrv_ioctl;
-#else
-    vap[vapId].dev->do_ioctl = NULL;
-#endif
+    vap[vapId].dev->netdev_ops = &vap_netdev_ops;
     vap[vapId].dev->destructor = free_netdev;
 
     vap[vapId].dev->tx_queue_len = 0;
@@ -1068,6 +1074,18 @@
     usb_unlink_urb(macp->RegInUrb);
 }
 
+static const struct net_device_ops otus_netdev_ops = {
+	.ndo_open		= usbdrv_open,
+	.ndo_stop		= usbdrv_close,
+	.ndo_start_xmit		= usbdrv_xmit_frame,
+	.ndo_change_mtu		= usbdrv_change_mtu,
+	.ndo_get_stats		= usbdrv_get_stats,
+	.ndo_set_multicast_list	= usbdrv_set_multi,
+	.ndo_set_mac_address	= usbdrv_set_mac,
+	.ndo_do_ioctl		= usbdrv_ioctl,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
 {
     //unsigned char addr[6];
@@ -1092,14 +1110,7 @@
     dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def;
 #endif
 
-    dev->open = usbdrv_open;
-    dev->hard_start_xmit = usbdrv_xmit_frame;
-    dev->stop = usbdrv_close;
-    dev->change_mtu = &usbdrv_change_mtu;
-    dev->get_stats = usbdrv_get_stats;
-    dev->set_multicast_list = usbdrv_set_multi;
-    dev->set_mac_address = usbdrv_set_mac;
-    dev->do_ioctl = usbdrv_ioctl;
+    dev->netdev_ops = &otus_netdev_ops;
 
     dev->flags |= IFF_MULTICAST;
 
diff --git a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c
index 78f1d22..2a6d937 100644
--- a/drivers/staging/otus/zdusb.c
+++ b/drivers/staging/otus/zdusb.c
@@ -48,7 +48,8 @@
 static struct usb_device_id zd1221_ids [] = {
 	{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
         { USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
-	{ USB_DEVICE(0x0846, 0x9010) },
+	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
+	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/staging/otus/zdusb.h b/drivers/staging/otus/zdusb.h
index 656dc21..9f8ab2e 100644
--- a/drivers/staging/otus/zdusb.h
+++ b/drivers/staging/otus/zdusb.h
@@ -40,4 +40,8 @@
 #define VENDOR_DLINK            0x07D1  //Dlink
 #define PRODUCT_DWA160A         0x3C10
 
+#define	VENDOR_NETGEAR		0x0846	/* NetGear */
+#define	PRODUCT_WNDA3100	0x9010
+#define	PRODUCT_WN111v2		0x9001
+
 #endif
diff --git a/drivers/staging/pohmelfs/config.c b/drivers/staging/pohmelfs/config.c
index 3e67da9..a6eaa42 100644
--- a/drivers/staging/pohmelfs/config.c
+++ b/drivers/staging/pohmelfs/config.c
@@ -81,6 +81,45 @@
 	return g;
 }
 
+static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst)
+{
+	struct pohmelfs_config *tmp;
+
+	INIT_LIST_HEAD(&dst->config_entry);
+
+	list_for_each_entry(tmp, &psb->state_list, config_entry) {
+		if (dst->state.ctl.prio > tmp->state.ctl.prio)
+			list_add_tail(&dst->config_entry, &tmp->config_entry);
+	}
+	if (list_empty(&dst->config_entry))
+		list_add_tail(&dst->config_entry, &psb->state_list);
+}
+
+static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb,
+		struct pohmelfs_config *dst, struct pohmelfs_config *new)
+{
+	if ((dst->state.ctl.prio == new->state.ctl.prio) &&
+		(dst->state.ctl.perm == new->state.ctl.perm))
+		return 0;
+
+	dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n",
+			__func__, dst->state.ctl.prio, dst->state.ctl.perm,
+			new->state.ctl.prio, new->state.ctl.perm);
+	dst->state.ctl.prio = new->state.ctl.prio;
+	dst->state.ctl.perm = new->state.ctl.perm;
+
+	list_del_init(&dst->config_entry);
+	pohmelfs_insert_config_entry(psb, dst);
+	return 0;
+}
+
+/*
+ * pohmelfs_copy_config() is used to copy new state configs from the
+ * config group (controlled by the netlink messages) into the superblock.
+ * This happens either at startup time where no transactions can access
+ * the list of the configs (and thus list of the network states), or at
+ * run-time, where it is protected by the psb->state_lock.
+ */
 int pohmelfs_copy_config(struct pohmelfs_sb *psb)
 {
 	struct pohmelfs_config_group *g;
@@ -103,7 +142,9 @@
 		err = 0;
 		list_for_each_entry(dst, &psb->state_list, config_entry) {
 			if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) {
-				err = -EEXIST;
+				err = pohmelfs_move_config_entry(psb, dst, c);
+				if (!err)
+					err = -EEXIST;
 				break;
 			}
 		}
@@ -119,7 +160,7 @@
 
 		memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl));
 
-		list_add_tail(&dst->config_entry, &psb->state_list);
+		pohmelfs_insert_config_entry(psb, dst);
 
 		err = pohmelfs_state_init_one(psb, dst);
 		if (err) {
@@ -248,6 +289,13 @@
         return err;
 }
 
+static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new)
+{
+	old->perm = new->perm;
+	old->prio = new->prio;
+	return 0;
+}
+
 static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
 {
 	struct pohmelfs_config_group *g;
@@ -278,6 +326,9 @@
 				g->num_entry--;
 				kfree(c);
 				goto out_unlock;
+			} else if (action == POHMELFS_FLAGS_MODIFY) {
+				err = pohmelfs_modify_config(sc, ctl);
+				goto out_unlock;
 			} else {
 				err = -EEXIST;
 				goto out_unlock;
@@ -296,6 +347,7 @@
 	}
 	memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl));
 	g->num_entry++;
+
 	list_add_tail(&c->config_entry, &g->config_list);
 
 out_unlock:
@@ -401,10 +453,9 @@
 
 	switch (msg->flags) {
 		case POHMELFS_FLAGS_ADD:
-			err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD);
-			break;
 		case POHMELFS_FLAGS_DEL:
-			err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL);
+		case POHMELFS_FLAGS_MODIFY:
+			err = pohmelfs_cn_ctl(msg, msg->flags);
 			break;
 		case POHMELFS_FLAGS_SHOW:
 			err = pohmelfs_cn_disp(msg);
diff --git a/drivers/staging/pohmelfs/dir.c b/drivers/staging/pohmelfs/dir.c
index 7a41183..b579984 100644
--- a/drivers/staging/pohmelfs/dir.c
+++ b/drivers/staging/pohmelfs/dir.c
@@ -328,7 +328,7 @@
 {
 	struct inode *inode = &pi->vfs_inode;
 	struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
-	long ret = msecs_to_jiffies(25000);
+	long ret = psb->wait_on_page_timeout;
 	int err;
 
 	dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n",
@@ -389,11 +389,11 @@
 	dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n",
 			__func__, pi->ino, (u64)file->f_pos,
 			(unsigned long)file->private_data);
-
+#if 0
 	err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
 	if (err)
 		return err;
-
+#endif
 	err = pohmelfs_sync_remote_dir(pi);
 	if (err)
 		return err;
@@ -513,10 +513,6 @@
 
 	need_lock = pohmelfs_need_lock(parent, lock_type);
 
-	err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
-	if (err)
-		goto out;
-
 	str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
 
 	mutex_lock(&parent->offset_lock);
@@ -525,8 +521,8 @@
 		ino = n->ino;
 	mutex_unlock(&parent->offset_lock);
 
-	dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
-			__func__, ino, inode, str.name, str.hash, parent->state);
+	dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n",
+			__func__, ino, inode, str.name, str.hash, parent->state, need_lock);
 
 	if (ino) {
 		inode = ilookup(dir->i_sb, ino);
@@ -534,7 +530,7 @@
 			goto out;
 	}
 
-	dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
+	dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
 			__func__, dir, parent->ino,
 			str.name, str.len, parent->state, ino);
 
@@ -543,6 +539,10 @@
 			goto out;
 	}
 
+	err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
+	if (err)
+		goto out;
+
 	err = pohmelfs_lookup_single(parent, &str, ino);
 	if (err)
 		goto out;
@@ -557,10 +557,10 @@
 
 	if (ino) {
 		inode = ilookup(dir->i_sb, ino);
-		printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
+		dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
 				__func__, ino, inode, str.name, str.hash);
 		if (!inode) {
-			printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
+			dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
 				__func__, ino, str.name, str.hash);
 			//return NULL;
 			return ERR_PTR(-EACCES);
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 5bf1650..b2eaf90 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1169,16 +1169,17 @@
 static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
 {
 	struct inode *inode = dentry->d_inode;
+#if 0
 	struct pohmelfs_inode *pi = POHMELFS_I(inode);
 	int err;
 
 	err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
 	if (err)
 		return err;
-
 	dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
 			__func__, pi->ino, inode->i_mode, inode->i_uid,
 			inode->i_gid, inode->i_size);
+#endif
 
 	generic_fillattr(inode, stat);
 	return 0;
@@ -1342,14 +1343,6 @@
 
 	kfree(psb);
 	sb->s_fs_info = NULL;
-
-	pohmelfs_ftrans_exit();
-}
-
-static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
-{
-	*flags |= MS_RDONLY;
-	return 0;
 }
 
 static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -1394,42 +1387,33 @@
 	return 0;
 }
 
-static const struct super_operations pohmelfs_sb_ops = {
-	.alloc_inode	= pohmelfs_alloc_inode,
-	.destroy_inode	= pohmelfs_destroy_inode,
-	.drop_inode	= pohmelfs_drop_inode,
-	.write_inode	= pohmelfs_write_inode,
-	.put_super	= pohmelfs_put_super,
-	.remount_fs	= pohmelfs_remount,
-	.statfs		= pohmelfs_statfs,
-	.show_options	= pohmelfs_show_options,
-};
-
 enum {
 	pohmelfs_opt_idx,
+	pohmelfs_opt_crypto_thread_num,
+	pohmelfs_opt_trans_max_pages,
+	pohmelfs_opt_crypto_fail_unsupported,
+
+	/* Remountable options */
 	pohmelfs_opt_trans_scan_timeout,
 	pohmelfs_opt_drop_scan_timeout,
 	pohmelfs_opt_wait_on_page_timeout,
 	pohmelfs_opt_trans_retries,
-	pohmelfs_opt_crypto_thread_num,
-	pohmelfs_opt_trans_max_pages,
-	pohmelfs_opt_crypto_fail_unsupported,
 	pohmelfs_opt_mcache_timeout,
 };
 
 static struct match_token pohmelfs_tokens[] = {
 	{pohmelfs_opt_idx, "idx=%u"},
+	{pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
+	{pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
+	{pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
 	{pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"},
 	{pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"},
 	{pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"},
 	{pohmelfs_opt_trans_retries, "trans_retries=%u"},
-	{pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
-	{pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
-	{pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
 	{pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"},
 };
 
-static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
+static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount)
 {
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
@@ -1449,6 +1433,9 @@
 		if (err)
 			return err;
 
+		if (remount && token <= pohmelfs_opt_crypto_fail_unsupported)
+			continue;
+
 		switch (token) {
 			case pohmelfs_opt_idx:
 				psb->idx = option;
@@ -1485,6 +1472,25 @@
 	return 0;
 }
 
+static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
+{
+	int err;
+	struct pohmelfs_sb *psb = POHMELFS_SB(sb);
+	unsigned long old_sb_flags = sb->s_flags;
+
+	err = pohmelfs_parse_options(data, psb, 1);
+	if (err)
+		goto err_out_restore;
+
+	if (!(*flags & MS_RDONLY))
+		sb->s_flags &= ~MS_RDONLY;
+	return 0;
+
+err_out_restore:
+	sb->s_flags = old_sb_flags;
+	return err;
+}
+
 static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count)
 {
 	struct inode *inode = &pi->vfs_inode;
@@ -1753,6 +1759,57 @@
 	return err;
 }
 
+static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
+{
+	struct netfs_state *st;
+	struct pohmelfs_ctl *ctl;
+	struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb);
+	struct pohmelfs_config *c;
+
+	mutex_lock(&psb->state_lock);
+
+	seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n");
+
+	list_for_each_entry(c, &psb->state_list, config_entry) {
+		st = &c->state;
+		ctl = &st->ctl;
+
+		seq_printf(m, "%u ", ctl->idx);
+		if (ctl->addr.sa_family == AF_INET) {
+			struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
+			//seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
+			seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
+		} else if (ctl->addr.sa_family == AF_INET6) {
+			struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
+			seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port));
+		} else {
+			unsigned int i;
+			for (i=0; i<ctl->addrlen; ++i)
+				seq_printf(m, "%02x.", ctl->addr.addr[i]);
+		}
+
+		seq_printf(m, " %u %u %d %u %x\n",
+				ctl->type, ctl->proto,
+				st->socket != NULL,
+				ctl->prio, ctl->perm);
+	}
+	mutex_unlock(&psb->state_lock);
+
+	return 0;
+}
+
+static const struct super_operations pohmelfs_sb_ops = {
+	.alloc_inode	= pohmelfs_alloc_inode,
+	.destroy_inode	= pohmelfs_destroy_inode,
+	.drop_inode	= pohmelfs_drop_inode,
+	.write_inode	= pohmelfs_write_inode,
+	.put_super	= pohmelfs_put_super,
+	.remount_fs	= pohmelfs_remount,
+	.statfs		= pohmelfs_statfs,
+	.show_options	= pohmelfs_show_options,
+	.show_stats	= pohmelfs_show_stats,
+};
+
 /*
  * Allocate private superblock and create root dir.
  */
@@ -1764,8 +1821,6 @@
 	struct pohmelfs_inode *npi;
 	struct qstr str;
 
-	pohmelfs_ftrans_init();
-
 	psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL);
 	if (!psb)
 		goto err_out_exit;
@@ -1816,7 +1871,7 @@
 	mutex_init(&psb->state_lock);
 	INIT_LIST_HEAD(&psb->state_list);
 
-	err = pohmelfs_parse_options((char *) data, psb);
+	err = pohmelfs_parse_options((char *) data, psb, 0);
 	if (err)
 		goto err_out_free_sb;
 
@@ -1845,6 +1900,8 @@
 		err = PTR_ERR(npi);
 		goto err_out_crypto_exit;
 	}
+	set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
+	clear_bit(NETFS_INODE_OWNED, &npi->state);
 
 	root = &npi->vfs_inode;
 
@@ -1887,11 +1944,29 @@
 				mnt);
 }
 
+/*
+ * We need this to sync all inodes earlier, since when writeback
+ * is invoked from the umount/mntput path dcache is already shrunk,
+ * see generic_shutdown_super(), and no inodes can access the path.
+ */
+static void pohmelfs_kill_super(struct super_block *sb)
+{
+	struct writeback_control wbc = {
+		.sync_mode	= WB_SYNC_ALL,
+		.range_start	= 0,
+		.range_end	= LLONG_MAX,
+		.nr_to_write	= LONG_MAX,
+	};
+	generic_sync_sb_inodes(sb, &wbc);
+
+	kill_anon_super(sb);
+}
+
 static struct file_system_type pohmel_fs_type = {
 	.owner		= THIS_MODULE,
 	.name		= "pohmel",
 	.get_sb		= pohmelfs_get_sb,
-	.kill_sb 	= kill_anon_super,
+	.kill_sb 	= pohmelfs_kill_super,
 };
 
 /*
diff --git a/drivers/staging/pohmelfs/lock.c b/drivers/staging/pohmelfs/lock.c
index ad4a185..22fef18 100644
--- a/drivers/staging/pohmelfs/lock.c
+++ b/drivers/staging/pohmelfs/lock.c
@@ -41,7 +41,8 @@
 	path_len = err;
 
 	err = -ENOMEM;
-	t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0);
+	t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize,
+			NETFS_TRANS_SINGLE_DST, 0);
 	if (!t)
 		goto err_out_exit;
 
diff --git a/drivers/staging/pohmelfs/net.c b/drivers/staging/pohmelfs/net.c
index c9b8540..11ecac0 100644
--- a/drivers/staging/pohmelfs/net.c
+++ b/drivers/staging/pohmelfs/net.c
@@ -26,55 +26,6 @@
 
 #include "netfs.h"
 
-static int pohmelfs_ftrans_size = 10240;
-static u32 *pohmelfs_ftrans;
-
-int pohmelfs_ftrans_init(void)
-{
-	pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4);
-	if (!pohmelfs_ftrans)
-		return -ENOMEM;
-
-	return 0;
-}
-
-void pohmelfs_ftrans_exit(void)
-{
-	vfree(pohmelfs_ftrans);
-}
-
-void pohmelfs_ftrans_clean(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		pohmelfs_ftrans[idx] = 0;
-	}
-}
-
-void pohmelfs_ftrans_update(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		pohmelfs_ftrans[idx] = i;
-	}
-}
-
-int pohmelfs_ftrans_check(u64 id)
-{
-	if (pohmelfs_ftrans) {
-		u32 i = id & 0xffffffff;
-		int idx = i % pohmelfs_ftrans_size;
-
-		return (pohmelfs_ftrans[idx] == i);
-	}
-
-	return -1;
-}
-
 /*
  * Async machinery lives here.
  * All commands being sent to server do _not_ require sync reply,
@@ -450,8 +401,24 @@
 			if (err != -EEXIST)
 				goto err_out_put;
 		} else {
+			struct dentry *dentry, *alias, *pd;
+
 			set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
 			clear_bit(NETFS_INODE_OWNED, &npi->state);
+
+			pd = d_find_alias(&parent->vfs_inode);
+			if (pd) {
+				str.hash = full_name_hash(str.name, str.len);
+				dentry = d_alloc(pd, &str);
+				if (dentry) {
+					alias = d_materialise_unique(dentry, &npi->vfs_inode);
+					if (alias)
+						dput(dentry);
+				}
+
+				dput(dentry);
+				dput(pd);
+			}
 		}
 	}
 out:
@@ -638,15 +605,12 @@
 	if (dst) {
 		netfs_trans_remove_nolock(dst, st);
 		t = dst->trans;
-
-		pohmelfs_ftrans_update(cmd->start);
 	}
 	mutex_unlock(&st->trans_lock);
 
 	if (!t) {
-		int check = pohmelfs_ftrans_check(cmd->start);
-		printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n",
-				__func__, cmd->start, cmd->id, cmd->size, cmd->ext, check);
+		printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n",
+				__func__, cmd->start, cmd->id, cmd->size, cmd->ext);
 		err = -EINVAL;
 		goto out;
 	}
diff --git a/drivers/staging/pohmelfs/netfs.h b/drivers/staging/pohmelfs/netfs.h
index 2ff21ae..c78cfcb 100644
--- a/drivers/staging/pohmelfs/netfs.h
+++ b/drivers/staging/pohmelfs/netfs.h
@@ -87,6 +87,7 @@
 	POHMELFS_FLAGS_DEL,     /* Network state control message for DEL */
 	POHMELFS_FLAGS_SHOW,    /* Network state control message for SHOW */
 	POHMELFS_FLAGS_CRYPTO,	/* Crypto data control message */
+	POHMELFS_FLAGS_MODIFY,	/* Network state modification message */
 };
 
 /*
@@ -116,16 +117,20 @@
 	unsigned char		data[0];	/* Algorithm string, key and IV */
 };
 
+#define POHMELFS_IO_PERM_READ		(1<<0)
+#define POHMELFS_IO_PERM_WRITE		(1<<1)
+
 /*
  * Configuration command used to create table of different remote servers.
  */
 struct pohmelfs_ctl
 {
-	unsigned int		idx;		/* Config index */
-	unsigned int		type;		/* Socket type */
-	unsigned int		proto;		/* Socket protocol */
-	unsigned int		addrlen;	/* Size of the address */
-	unsigned short		unused;		/* Align structure by 4 bytes */
+	__u32			idx;		/* Config index */
+	__u32			type;		/* Socket type */
+	__u32			proto;		/* Socket protocol */
+	__u16			addrlen;	/* Size of the address */
+	__u16			perm;		/* IO permission */
+	__u16			prio;		/* IO priority */
 	struct saddr		addr;		/* Remote server address */
 };
 
@@ -921,12 +926,6 @@
 		pohmelfs_mcache_free(psb, m);
 }
 
-int pohmelfs_ftrans_init(void);
-void pohmelfs_ftrans_exit(void);
-void pohmelfs_ftrans_update(u64 id);
-int pohmelfs_ftrans_check(u64 id);
-void pohmelfs_ftrans_clean(u64 id);
-
 #endif /* __KERNEL__*/
 
 #endif /* __NETFS_H */
diff --git a/drivers/staging/pohmelfs/trans.c b/drivers/staging/pohmelfs/trans.c
index bcb5942..fef5f9b 100644
--- a/drivers/staging/pohmelfs/trans.c
+++ b/drivers/staging/pohmelfs/trans.c
@@ -456,34 +456,25 @@
 		__func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state);
 #endif
 	mutex_lock(&psb->state_lock);
-
-	if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) {
-		st = &psb->active_state->state;
-
-		err = -EPIPE;
-		if (netfs_state_poll(st) & POLLOUT) {
-			err = netfs_trans_push_dst(t, st);
-			if (!err) {
-				err = netfs_trans_send(t, st);
-				if (err) {
-					netfs_trans_drop_last(t, st);
-				} else {
-					pohmelfs_switch_active(psb);
-					goto out;
-				}
-			}
-		}
-		pohmelfs_switch_active(psb);
-	}
-
 	list_for_each_entry(c, &psb->state_list, config_entry) {
 		st = &c->state;
 
+		if (t->flags & NETFS_TRANS_SINGLE_DST) {
+			if (!(st->ctl.perm & POHMELFS_IO_PERM_READ))
+				continue;
+		} else {
+			if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE))
+				continue;
+		}
+
+		if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio))
+			st = &psb->active_state->state;
+
 		err = netfs_trans_push(t, st);
 		if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
 			break;
 	}
-out:
+
 	mutex_unlock(&psb->state_lock);
 #if 0
 	dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n",
@@ -501,8 +492,6 @@
 
 	t->gen = atomic_inc_return(&psb->trans_gen);
 
-	pohmelfs_ftrans_clean(t->gen);
-
 	cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) +
 		t->attached_size + t->attached_pages * sizeof(struct netfs_cmd);
 	cmd->cmd = NETFS_TRANS;
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index cf17bcd..6c4396f 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -722,6 +722,20 @@
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt2860_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -733,11 +747,6 @@
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
 
 #ifdef CONFIG_STA_SUPPORT
 #if WIRELESS_EXT >= 12
@@ -760,12 +769,8 @@
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-	dev->validate_addr = NULL;
+	dev->netdev_ops = &rt2860_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5dd15aa..a42caa3 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -96,6 +96,7 @@
 	{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */		\
 	{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */		\
+	{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */		\
 	{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */		\
 	{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */		\
 	{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */		\
diff --git a/drivers/staging/rt2870/rt_main_dev.c b/drivers/staging/rt2870/rt_main_dev.c
index 313ecea..48ad411 100644
--- a/drivers/staging/rt2870/rt_main_dev.c
+++ b/drivers/staging/rt2870/rt_main_dev.c
@@ -855,6 +855,20 @@
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt2870_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -866,12 +880,6 @@
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
 //	dev->set_multicast_list = ieee80211_set_multicast_list;
 //	dev->change_mtu = ieee80211_change_mtu;
 #ifdef CONFIG_STA_SUPPORT
@@ -895,16 +903,10 @@
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 //	dev->uninit = ieee80211_if_reinit;
 //	dev->destructor = ieee80211_if_free;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-    dev->validate_addr = NULL;
-#endif
+	dev->netdev_ops = &rt2870_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
diff --git a/drivers/staging/rt3070/rt_main_dev.c b/drivers/staging/rt3070/rt_main_dev.c
index c000646..81f769c 100644
--- a/drivers/staging/rt3070/rt_main_dev.c
+++ b/drivers/staging/rt3070/rt_main_dev.c
@@ -436,7 +436,6 @@
 //    OID_SET_HT_PHYMODE		SetHT;
 //	WPDMA_GLO_CFG_STRUC     GloCfg;
 	UINT32 		MacCsr0 = 0;
-	UINT32		MacValue = 0;
 
 #ifdef RT2870
 #ifdef INF_AMAZON_SE
@@ -849,6 +848,20 @@
 	return (-1);
 } /* End of rt28xx_open */
 
+static const struct net_device_ops rt3070_netdev_ops = {
+	.ndo_open		= MainVirtualIF_open,
+	.ndo_stop		= MainVirtualIF_close,
+	.ndo_do_ioctl		= rt28xx_ioctl,
+	.ndo_get_stats		= RT28xx_get_ether_stats,
+	.ndo_validate_addr	= NULL,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+	.ndo_start_xmit		= IKANOS_DataFramesTx,
+#else
+	.ndo_start_xmit		= rt28xx_send_packets,
+#endif
+};
 
 /* Must not be called for mdev and apdev */
 static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
@@ -860,12 +873,6 @@
 
 
 	//ether_setup(dev);
-	dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
-	dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
 //	dev->set_multicast_list = ieee80211_set_multicast_list;
 //	dev->change_mtu = ieee80211_change_mtu;
 #ifdef CONFIG_STA_SUPPORT
@@ -889,16 +896,10 @@
 #if WIRELESS_EXT < 21
 		dev->get_wireless_stats = rt28xx_get_wireless_stats;
 #endif
-	dev->get_stats = RT28xx_get_ether_stats;
-	dev->open = MainVirtualIF_open; //rt28xx_open;
-	dev->stop = MainVirtualIF_close; //rt28xx_close;
 //	dev->uninit = ieee80211_if_reinit;
 //	dev->destructor = ieee80211_if_free;
 	dev->priv_flags = INT_MAIN;
-	dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-    dev->validate_addr = NULL;
-#endif
+	dev->netdev_ops = &rt3070_netdev_ops;
 	// find available device name
 	for (i = 0; i < 8; i++)
 	{
diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README
index 2d5b112..70f49099 100644
--- a/drivers/staging/slicoss/README
+++ b/drivers/staging/slicoss/README
@@ -10,7 +10,36 @@
 	- move firmware loading to request_firmware()
 	- remove direct memory access of structures
 	- any remaining sparse and checkpatch.pl warnings
-	- any netdev recommended changes
+
+	- use net_device_ops
+	- use dev->stats rather than adapter->stats
+	- don't cast netdev_priv it is already void
+	- use compare_ether_addr
+	- GET RID OF MACROS
+	- work on all architectures
+	   - without CONFIG_X86_64 confusion
+	   - do 64 bit correctly
+	   - don't depend on order of union
+	- get rid of ASSERT(), use BUG() instead but only where necessary
+	  looks like most aren't really useful
+	- no new SIOCDEVPRIVATE ioctl allowed
+	- don't use module_param for configuring interrupt mitigation
+	  use ethtool instead
+	- reorder code to elminate use of forward declarations
+	- don't keep private linked list of drivers.
+	- remove all the gratiutous debug infrastructure
+	- use PCI_DEVICE()
+	- do ethtool correctly using ethtool_ops
+	- NAPI?
+	- wasted overhead of extra stats
+	- state variables for things that are
+	  easily availble and shouldn't be kept in card structure, cardnum, ...
+	  slotnumber, events, ...
+	- get rid of slic_spinlock wrapper
+	- volatile == bad design => bad code
+	- locking too fine grained, not designed just throw more locks
+	  at problem
+
 
 Please send patches to:
         Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 9481563..6f5d0bf 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -345,6 +345,19 @@
 	return;
 }
 
+static const struct net_device_ops slic_netdev_ops = {
+	.ndo_open		= slic_entry_open,
+	.ndo_stop		= slic_entry_halt,
+	.ndo_start_xmit		= slic_xmit_start,
+	.ndo_do_ioctl		= slic_ioctl,
+	.ndo_set_mac_address	= slic_mac_set_address,
+	.ndo_get_stats		= slic_get_stats,
+	.ndo_set_multicast_list	= slic_mcast_set_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
 static int __devinit slic_entry_probe(struct pci_dev *pcidev,
 			       const struct pci_device_id *pci_tbl_entry)
 {
@@ -442,13 +455,7 @@
 
 	netdev->base_addr = (unsigned long)adapter->memorybase;
 	netdev->irq = adapter->irq;
-	netdev->open = slic_entry_open;
-	netdev->stop = slic_entry_halt;
-	netdev->hard_start_xmit = slic_xmit_start;
-	netdev->do_ioctl = slic_ioctl;
-	netdev->set_mac_address = slic_mac_set_address;
-	netdev->get_stats = slic_get_stats;
-	netdev->set_multicast_list = slic_mcast_set_list;
+	netdev->netdev_ops = &slic_netdev_ops;
 
 	slic_debug_adapter_create(adapter);
 
@@ -1260,7 +1267,7 @@
 	}
 
 	/* Doesn't already exist.  Allocate a structure to hold it */
-	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL);
+	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
 	if (mcaddr == NULL)
 		return 1;
 
@@ -2284,7 +2291,7 @@
 	}
 	if (!physcard) {
 		/* no structure allocated for this physical card yet */
-		physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL);
+		physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
 		ASSERT(physcard);
 
 		physcard->next = slic_global.phys_card;
diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig
index 8d3f46f..947fb75 100644
--- a/drivers/staging/stlc45xx/Kconfig
+++ b/drivers/staging/stlc45xx/Kconfig
@@ -1,6 +1,6 @@
 config STLC45XX
 	tristate "stlc4550/4560 support"
-	depends on MAC80211 && WLAN_80211 && SPI_MASTER
+	depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
 	---help---
 	  This is a driver for stlc4550 and stlc4560 chipsets.
 
diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index 891f6e3..076b3f7 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -322,6 +322,8 @@
 	int ret,i;
 
 	if (!adapter->intrregistered) {
+		spin_unlock_irqrestore(&sxg_global.driver_lock,
+					sxg_global.flags);
 		for (i=0; i<adapter->nr_msix_entries; i++) {
 			ret = request_irq (adapter->msi_entries[i].vector,
 					sxg_isr,
@@ -329,6 +331,8 @@
 					adapter->netdev->name,
 					adapter->netdev);
 			if (ret) {
+				spin_lock_irqsave(&sxg_global.driver_lock,
+						 sxg_global.flags);
 				DBG_ERROR("sxg: MSI-X request_irq (%s) "
 					"FAILED [%x]\n", adapter->netdev->name,
 					 ret);
@@ -336,6 +340,7 @@
 			}
 		}
 	}
+	spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
 	adapter->msi_enabled = TRUE;
 	adapter->intrregistered = 1;
 	adapter->IntRegistered = TRUE;
@@ -896,6 +901,22 @@
 	return status;
 }
 
+static const struct net_device_ops sxg_netdev_ops = {
+	.ndo_open		= sxg_entry_open,
+	.ndo_stop		= sxg_entry_halt,
+	.ndo_start_xmit		= sxg_send_packets,
+	.ndo_do_ioctl		= sxg_ioctl,
+	.ndo_change_mtu		= sxg_change_mtu,
+	.ndo_get_stats		= sxg_get_stats,
+	.ndo_set_multicast_list	= sxg_mcast_set_list,
+	.ndo_validate_addr	= eth_validate_addr,
+#if XXXTODO
+	.ndo_set_mac_address	= sxg_mac_set_address,
+#else
+	.ndo_set_mac_address	= eth_mac_addr,
+#endif
+};
+
 static int sxg_entry_probe(struct pci_dev *pcidev,
 			   const struct pci_device_id *pci_tbl_entry)
 {
@@ -1095,16 +1116,7 @@
 
 	netdev->base_addr = (unsigned long)adapter->base_addr;
 	netdev->irq = adapter->irq;
-	netdev->open = sxg_entry_open;
-	netdev->stop = sxg_entry_halt;
-	netdev->hard_start_xmit = sxg_send_packets;
-	netdev->do_ioctl = sxg_ioctl;
-	netdev->change_mtu = sxg_change_mtu;
-#if XXXTODO
-	netdev->set_mac_address = sxg_mac_set_address;
-#endif
-	netdev->get_stats = sxg_get_stats;
-	netdev->set_multicast_list = sxg_mcast_set_list;
+	netdev->netdev_ops = &sxg_netdev_ops;
 	SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops);
  	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	err = sxg_set_interrupt_capability(adapter);
@@ -2247,6 +2259,8 @@
 	DBG_ERROR("sxg: %s EXIT\n", __func__);
 
 	spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
+	mod_timer(&adapter->watchdog_timer, jiffies);
+
 	return STATUS_SUCCESS;
 }
 
@@ -2568,6 +2582,7 @@
 	u64 phys_addr;
 	unsigned long flags;
 	unsigned long queue_id=0;
+	int offload_cksum = 0;
 
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
 		  pSgl, SxgSgl, 0, 0);
@@ -2606,7 +2621,11 @@
                 struct iphdr *ip;
 
                 ip = ip_hdr(skb);
-		if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
+		if (ip->protocol == IPPROTO_TCP)
+			offload_cksum = 1;
+		if (!offload_cksum || !tcp_hdr(skb))
+			queue_id = 0;
+		else if (offload_cksum && (DataLength >= sizeof(
 							struct tcphdr))){
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
@@ -2615,8 +2634,11 @@
 						SXG_LARGE_SEND_QUEUE_MASK));
 		}
 	} else if (skb->protocol == htons(ETH_P_IPV6)) {
-		if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >=
-						 sizeof(struct tcphdr)) ) {
+		if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+			offload_cksum = 1;
+		if (!offload_cksum || !tcp_hdr(skb))
+			queue_id = 0;
+		else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){
 			queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
 					(ntohs (tcp_hdr(skb)->source) &
 					SXG_LARGE_SEND_QUEUE_MASK):
@@ -2645,23 +2667,38 @@
 	}
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
 		  XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
-	/* Update stats */
-	adapter->stats.tx_packets++;
-	adapter->stats.tx_bytes += DataLength;
-#if XXXTODO			/* Stats stuff */
-	if (SXG_MULTICAST_PACKET(EtherHdr)) {
-		if (SXG_BROADCAST_PACKET(EtherHdr)) {
-			adapter->Stats.DumbXmtBcastPkts++;
-			adapter->Stats.DumbXmtBcastBytes += DataLength;
+	memset(XmtCmd, '\0', sizeof(*XmtCmd));
+	XmtCmd->SgEntries = 1;
+	XmtCmd->Flags = 0;
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		/*
+		 * We need to set the Checkum in IP  header to 0. This is
+		 * required by hardware.
+		 */
+		if (offload_cksum) {
+			ip_hdr(skb)->check = 0x0;
+			XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
+			XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
+			/*
+			 * Dont know if length will require a change in
+			 * case of VLAN
+			 */
+			XmtCmd->CsumFlags.MacLen = ETH_HLEN;
+			XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
+							SXG_NW_HDR_LEN_SHIFT;
 		} else {
-			adapter->Stats.DumbXmtMcastPkts++;
-			adapter->Stats.DumbXmtMcastBytes += DataLength;
+			if (skb_checksum_help(skb)){
+				printk(KERN_EMERG "Dropped UDP packet for"
+					" incorrect checksum calculation\n");
+				if (XmtCmd)
+					SXG_ABORT_CMD(XmtRingInfo);
+				spin_unlock_irqrestore(&adapter->XmtZeroLock,
+							 flags);
+				return STATUS_SUCCESS;
+			}
 		}
-	} else {
-		adapter->Stats.DumbXmtUcastPkts++;
-		adapter->Stats.DumbXmtUcastBytes += DataLength;
 	}
-#endif
+
 	/*
 	 * Fill in the command
 	 * Copy out the first SGE to the command and adjust for offset
@@ -2679,31 +2716,17 @@
 		(SXG_INVALID_SGL(phys_addr,skb->data_len)))
 	{
 		spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
+		if (XmtCmd)
+			SXG_ABORT_CMD(XmtRingInfo);
 		/* Silently drop this packet */
 		printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n");
 		return STATUS_SUCCESS;
 	}
-	memset(XmtCmd, '\0', sizeof(*XmtCmd));
 	XmtCmd->Buffer.FirstSgeAddress = phys_addr;
 	XmtCmd->Buffer.FirstSgeLength = DataLength;
 	XmtCmd->Buffer.SgeOffset = 0;
 	XmtCmd->Buffer.TotalLength = DataLength;
-	XmtCmd->SgEntries = 1;
-	XmtCmd->Flags = 0;
 
-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		/*
-		 * We need to set the Checkum in IP  header to 0. This is
-		 * required by hardware.
-		 */
-		ip_hdr(skb)->check = 0x0;
-		XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
-		XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
-		/* Dont know if length will require a change in case of VLAN */
-		XmtCmd->CsumFlags.MacLen = ETH_HLEN;
-		XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
-							SXG_NW_HDR_LEN_SHIFT;
-	}
 	/*
 	 * Advance transmit cmd descripter by 1.
 	 * NOTE - See comments in SxgTcpOutput where we write
@@ -2715,6 +2738,24 @@
 	ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0);
 	WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE);
 	adapter->Stats.XmtQLen++;	/* Stats within lock */
+	/* Update stats */
+	adapter->stats.tx_packets++;
+	adapter->stats.tx_bytes += DataLength;
+#if XXXTODO			/* Stats stuff */
+	if (SXG_MULTICAST_PACKET(EtherHdr)) {
+		if (SXG_BROADCAST_PACKET(EtherHdr)) {
+			adapter->Stats.DumbXmtBcastPkts++;
+			adapter->Stats.DumbXmtBcastBytes += DataLength;
+		} else {
+			adapter->Stats.DumbXmtMcastPkts++;
+			adapter->Stats.DumbXmtMcastBytes += DataLength;
+		}
+	} else {
+		adapter->Stats.DumbXmtUcastPkts++;
+		adapter->Stats.DumbXmtUcastBytes += DataLength;
+	}
+#endif
+
 	spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
 	SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
 		  XmtCmd, pSgl, SxgSgl, 0);
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
index 85b7054..9c62f78 100644
--- a/drivers/staging/uc2322/aten2011.c
+++ b/drivers/staging/uc2322/aten2011.c
@@ -603,10 +603,9 @@
 
 	tty = tty_port_tty_get(&ATEN2011_port->port->port);
 
-	if (tty && ATEN2011_port->open) {
+	if (tty && ATEN2011_port->open)
 		/* tell the tty driver that something has changed */
-		wake_up_interruptible(&tty->write_wait);
-	}
+		tty_wakeup(tty);
 
 	/* schedule_work(&ATEN2011_port->port->work); */
 	tty_kref_put(tty);
@@ -825,12 +824,6 @@
 	status = 0;
 	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-
-	if (tty)
-		tty->low_latency = 1;
 	/*
 	 * Check to see if we've set up our endpoint info yet
 	 * (can't set it up in ATEN2011_startup as the structures
@@ -1473,22 +1466,7 @@
 
 	cflag = tty->termios->c_cflag;
 
-	if (!cflag) {
-		dbg("%s %s", __func__, "cflag is NULL");
-		return;
-	}
-
-	/* check that they really want us to change something */
-	if (old_termios) {
-		if ((cflag == old_termios->c_cflag) &&
-		    (RELEVANT_IFLAG(tty->termios->c_iflag) ==
-		     RELEVANT_IFLAG(old_termios->c_iflag))) {
-			dbg("%s", "Nothing to change");
-			return;
-		}
-	}
-
-	dbg("%s - clfag %08x iflag %08x", __func__,
+	dbg("%s - cflag %08x iflag %08x", __func__,
 	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
 
 	if (old_termios) {
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index b2a606a..393e4df 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -711,6 +711,20 @@
 	return 0;
 }
 
+static const struct net_device_ops p80211_netdev_ops = {
+	.ndo_init		= p80211knetdev_init,
+	.ndo_open		= p80211knetdev_open,
+	.ndo_stop		= p80211knetdev_stop,
+	.ndo_get_stats		= p80211knetdev_get_stats,
+	.ndo_start_xmit		= p80211knetdev_hard_start_xmit,
+	.ndo_set_multicast_list	= p80211knetdev_set_multicast_list,
+	.ndo_do_ioctl		= p80211knetdev_do_ioctl,
+	.ndo_set_mac_address	= p80211knetdev_set_mac_address,
+	.ndo_tx_timeout		= p80211knetdev_tx_timeout,
+	.ndo_change_mtu		= wlan_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*----------------------------------------------------------------
 * wlan_setup
 *
@@ -756,11 +770,7 @@
 	} else {
 		wlandev->netdev = dev;
 		dev->ml_priv = wlandev;
-		dev->hard_start_xmit = p80211knetdev_hard_start_xmit;
-		dev->get_stats = p80211knetdev_get_stats;
-		dev->init = p80211knetdev_init;
-		dev->open = p80211knetdev_open;
-		dev->stop = p80211knetdev_stop;
+		dev->netdev_ops = &p80211_netdev_ops;
 
 		mutex_init(&wlandev->ioctl_lock);
 		/* block ioctls until fully initialised. Don't forget to call
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index c60b8fc..28034c8 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -147,5 +147,6 @@
 module_init(hilscher_init_module);
 module_exit(hilscher_exit_module);
 
+MODULE_DEVICE_TABLE(pci, hilscher_pci_ids);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger");
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 3771d6e..0fe4345 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -3,7 +3,7 @@
  *
  * This driver supports USB CDC WCM Device Management.
  *
- * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2007-2009 Oliver Neukum
  *
  * Some code taken from cdc-acm.c
  *
@@ -610,7 +610,7 @@
 	if (!buffer)
 		goto out;
 
-	while (buflen > 0) {
+	while (buflen > 2) {
 		if (buffer [1] != USB_DT_CS_INTERFACE) {
 			dev_err(&intf->dev, "skipping garbage\n");
 			goto next_desc;
@@ -646,16 +646,18 @@
 	spin_lock_init(&desc->iuspin);
 	init_waitqueue_head(&desc->wait);
 	desc->wMaxCommand = maxcom;
+	/* this will be expanded and needed in hardware endianness */
 	desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
 	desc->intf = intf;
 	INIT_WORK(&desc->rxwork, wdm_rxwork);
 
-	iface = &intf->altsetting[0];
-	ep = &iface->endpoint[0].desc;
-	if (!usb_endpoint_is_int_in(ep)) {
-		rv = -EINVAL;
+	rv = -EINVAL;
+	iface = intf->cur_altsetting;
+	if (iface->desc.bNumEndpoints != 1)
 		goto err;
-	}
+	ep = &iface->endpoint[0].desc;
+	if (!ep || !usb_endpoint_is_int_in(ep))
+		goto err;
 
 	desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
 	desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
@@ -711,12 +713,19 @@
 
 	usb_set_intfdata(intf, desc);
 	rv = usb_register_dev(intf, &wdm_class);
-	dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
-		 intf->minor - WDM_MINOR_BASE);
 	if (rv < 0)
-		goto err;
+		goto err3;
+	else
+		dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+			intf->minor - WDM_MINOR_BASE);
 out:
 	return rv;
+err3:
+	usb_set_intfdata(intf, NULL);
+	usb_buffer_free(interface_to_usbdev(desc->intf),
+			desc->bMaxPacketSize0,
+			desc->inbuf,
+			desc->response->transfer_dma);
 err2:
 	usb_buffer_free(interface_to_usbdev(desc->intf),
 			desc->wMaxPacketSize,
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index cadb2dc..3ba2fff 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -119,7 +119,7 @@
 		if (size <= pool_max [i])
 			return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
 	}
-	return dma_alloc_coherent(hcd->self.controller, size, dma, 0);
+	return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
 }
 
 void hcd_buffer_free(
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index df3c539..3086090 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -841,7 +841,7 @@
 	ret = checkintf(ps, ret);
 	if (ret)
 		return ret;
-	usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0);
+	usb_reset_endpoint(ps->dev, ep);
 	return 0;
 }
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 81fa850..42b93da 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1539,6 +1539,32 @@
 		hcd->driver->endpoint_disable(hcd, ep);
 }
 
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep:   the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+			    struct usb_host_endpoint *ep)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (hcd->driver->endpoint_reset)
+		hcd->driver->endpoint_reset(hcd, ep);
+	else {
+		int epnum = usb_endpoint_num(&ep->desc);
+		int is_out = usb_endpoint_dir_out(&ep->desc);
+		int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+		usb_settoggle(udev, epnum, is_out, 0);
+		if (is_control)
+			usb_settoggle(udev, epnum, !is_out, 0);
+	}
+}
+
 /* Protect against drivers that try to unlink URBs after the device
  * is gone, by waiting until all unlinks for @udev are finished.
  * Since we don't currently track URBs by device, simply wait until
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index f750eb1..e7d4479 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -206,6 +206,11 @@
 	void 	(*endpoint_disable)(struct usb_hcd *hcd,
 			struct usb_host_endpoint *ep);
 
+	/* (optional) reset any endpoint state such as sequence number
+	   and current window */
+	void 	(*endpoint_reset)(struct usb_hcd *hcd,
+			struct usb_host_endpoint *ep);
+
 	/* root hub support */
 	int	(*hub_status_data) (struct usb_hcd *hcd, char *buf);
 	int	(*hub_control) (struct usb_hcd *hcd,
@@ -234,6 +239,8 @@
 		struct usb_host_endpoint *ep);
 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
 		struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+		struct usb_host_endpoint *ep);
 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
 extern int usb_hcd_get_frame_number(struct usb_device *udev);
 
@@ -279,6 +286,13 @@
 extern void usb_hc_died(struct usb_hcd *hcd);
 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
 
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+		 ((bit) << (ep)))
+
 /* -------------------------------------------------------------------------- */
 
 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 30a0690..b626283 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1002,8 +1002,7 @@
 	 * the copy in usb-storage, for as long as we need two copies.
 	 */
 
-	/* toggle was reset by the clear */
-	usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+	usb_reset_endpoint(dev, endp);
 
 	return 0;
 }
@@ -1076,6 +1075,30 @@
 }
 
 /**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address.  Endpoint number for output,
+ *	endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+	struct usb_host_endpoint *ep;
+
+	if (usb_endpoint_out(epaddr))
+		ep = dev->ep_out[epnum];
+	else
+		ep = dev->ep_in[epnum];
+	if (ep)
+		usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
+/**
  * usb_disable_interface -- Disable all endpoints for an interface
  * @dev: the device whose interface is being disabled
  * @intf: pointer to the interface descriptor
@@ -1117,7 +1140,6 @@
 		usb_disable_endpoint(dev, i, true);
 		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
-	dev->toggle[0] = dev->toggle[1] = 0;
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1154,28 +1176,24 @@
  * usb_enable_endpoint - Enable an endpoint for USB communications
  * @dev: the device whose interface is being enabled
  * @ep: the endpoint
- * @reset_toggle: flag to set the endpoint's toggle back to 0
+ * @reset_ep: flag to reset the endpoint state
  *
- * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
  * For control endpoints, both the input and output sides are handled.
  */
 void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
-		bool reset_toggle)
+		bool reset_ep)
 {
 	int epnum = usb_endpoint_num(&ep->desc);
 	int is_out = usb_endpoint_dir_out(&ep->desc);
 	int is_control = usb_endpoint_xfer_control(&ep->desc);
 
-	if (is_out || is_control) {
-		if (reset_toggle)
-			usb_settoggle(dev, epnum, 1, 0);
+	if (reset_ep)
+		usb_hcd_reset_endpoint(dev, ep);
+	if (is_out || is_control)
 		dev->ep_out[epnum] = ep;
-	}
-	if (!is_out || is_control) {
-		if (reset_toggle)
-			usb_settoggle(dev, epnum, 0, 0);
+	if (!is_out || is_control)
 		dev->ep_in[epnum] = ep;
-	}
 	ep->enabled = 1;
 }
 
@@ -1183,18 +1201,18 @@
  * usb_enable_interface - Enable all the endpoints for an interface
  * @dev: the device whose interface is being enabled
  * @intf: pointer to the interface descriptor
- * @reset_toggles: flag to set the endpoints' toggles back to 0
+ * @reset_eps: flag to reset the endpoints' state
  *
  * Enables all the endpoints for the interface's current altsetting.
  */
 void usb_enable_interface(struct usb_device *dev,
-		struct usb_interface *intf, bool reset_toggles)
+		struct usb_interface *intf, bool reset_eps)
 {
 	struct usb_host_interface *alt = intf->cur_altsetting;
 	int i;
 
 	for (i = 0; i < alt->desc.bNumEndpoints; ++i)
-		usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
+		usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
 }
 
 /**
@@ -1335,7 +1353,7 @@
  * This issues a standard SET_CONFIGURATION request to the device using
  * the current configuration.  The effect is to reset most USB-related
  * state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
  * endpoints).  Other usbcore state is unchanged, including bindings of
  * usb device drivers to interfaces.
  *
@@ -1343,7 +1361,7 @@
  * (multi-interface) devices.  Instead, the driver for each interface may
  * use usb_set_interface() on the interfaces it claims.  Be careful though;
  * some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles).  Resetting the whole
+ * reset all the interface state (notably endpoint state).  Resetting the whole
  * configuration would affect other drivers' interfaces.
  *
  * The caller must own the device lock.
@@ -1376,8 +1394,6 @@
 	if (retval < 0)
 		return retval;
 
-	dev->toggle[0] = dev->toggle[1] = 0;
-
 	/* re-init hc/hcd interface/endpoint state */
 	for (i = 0; i < config->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = config->interface[i];
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index dcfc072..7eee400 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -362,7 +362,7 @@
 	dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
 	dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
 	/* ep0 maxpacket comes later, from device descriptor */
-	usb_enable_endpoint(dev, &dev->ep0, true);
+	usb_enable_endpoint(dev, &dev->ep0, false);
 	dev->can_submit = 1;
 
 	/* Save readable and stable topology id, distinguishing devices
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 22c6596..38e531e 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -51,6 +51,7 @@
  * - Gadget API (majority of optional features)
  * - Suspend & Remote Wakeup
  */
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
 #include <linux/dma-mapping.h>
@@ -142,7 +143,7 @@
 #define CAP_DEVICEADDR      (0x014UL)
 #define CAP_ENDPTLISTADDR   (0x018UL)
 #define CAP_PORTSC          (0x044UL)
-#define CAP_DEVLC           (0x0B4UL)
+#define CAP_DEVLC           (0x084UL)
 #define CAP_USBMODE         (hw_bank.lpm ? 0x0C8UL : 0x068UL)
 #define CAP_ENDPTSETUPSTAT  (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
 #define CAP_ENDPTPRIME      (hw_bank.lpm ? 0x0DCUL : 0x070UL)
@@ -1986,6 +1987,8 @@
 	do {
 		dbg_event(_usb_addr(mEp), "ENABLE", 0);
 
+		mEp->qh[mEp->dir].ptr->cap = 0;
+
 		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
 			mEp->qh[mEp->dir].ptr->cap |=  QH_IOS;
 		else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 5c030b0..381a53b 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -738,7 +738,6 @@
 static struct usb_gadget_driver		fsg_driver;
 
 static void	close_backing_file(struct lun *curlun);
-static void	close_all_backing_files(struct fsg_dev *fsg);
 
 
 /*-------------------------------------------------------------------------*/
@@ -3593,12 +3592,10 @@
 	fsg->thread_task = NULL;
 	spin_unlock_irq(&fsg->lock);
 
-	/* In case we are exiting because of a signal, unregister the
-	 * gadget driver and close the backing file. */
-	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) {
+	/* If we are exiting because of a signal, unregister the
+	 * gadget driver. */
+	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
 		usb_gadget_unregister_driver(&fsg_driver);
-		close_all_backing_files(fsg);
-	}
 
 	/* Let the unbind and cleanup routines know the thread has exited */
 	complete_and_exit(&fsg->thread_notifier, 0);
@@ -3703,14 +3700,6 @@
 	}
 }
 
-static void close_all_backing_files(struct fsg_dev *fsg)
-{
-	int	i;
-
-	for (i = 0; i < fsg->nluns; ++i)
-		close_backing_file(&fsg->luns[i]);
-}
-
 
 static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -3845,6 +3834,7 @@
 		if (curlun->registered) {
 			device_remove_file(&curlun->dev, &dev_attr_ro);
 			device_remove_file(&curlun->dev, &dev_attr_file);
+			close_backing_file(curlun);
 			device_unregister(&curlun->dev);
 			curlun->registered = 0;
 		}
@@ -4190,7 +4180,6 @@
 out:
 	fsg->state = FSG_STATE_TERMINATED;	// The thread is dead
 	fsg_unbind(gadget);
-	close_all_backing_files(fsg);
 	complete(&fsg->thread_notifier);
 	return rc;
 }
@@ -4284,7 +4273,6 @@
 	/* Wait for the thread to finish up */
 	wait_for_completion(&fsg->thread_notifier);
 
-	close_all_backing_files(fsg);
 	kref_put(&fsg->ref, fsg_release);
 }
 module_exit(fsg_cleanup);
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 57d9641..a2db0e1 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -3104,7 +3104,6 @@
 /*-------------------------------------------------------------------------*/
 
 static struct platform_driver udc_driver = {
-	.probe		= omap_udc_probe,
 	.remove		= __exit_p(omap_udc_remove),
 	.suspend	= omap_udc_suspend,
 	.resume		= omap_udc_resume,
@@ -3122,7 +3121,7 @@
 #endif
 		"%s\n", driver_desc,
 		use_dma ?  " (dma)" : "");
-	return platform_driver_register(&udc_driver);
+	return platform_driver_probe(&udc_driver, omap_udc_probe);
 }
 module_init(udc_init);
 
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 96d65ca..4007770 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -175,12 +175,6 @@
 	strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
 }
 
-static u32 eth_get_link(struct net_device *net)
-{
-	struct eth_dev	*dev = netdev_priv(net);
-	return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
 /* REVISIT can also support:
  *   - WOL (by tracking suspends and issuing remote wakeup)
  *   - msglevel (implies updated messaging)
@@ -189,7 +183,7 @@
 
 static struct ethtool_ops ops = {
 	.get_drvinfo = eth_get_drvinfo,
-	.get_link = eth_get_link
+	.get_link = ethtool_op_get_link,
 };
 
 static void defer_kevent(struct eth_dev *dev, int flag)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index ada5d2b..556d0ec 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -323,7 +323,7 @@
 		 * already scheduled transactions
 		 */
 		if (125 < usecs) {
-			int ufs = (usecs / 125) - 1;
+			int ufs = (usecs / 125);
 			int i;
 			for (i = uframe; i < (uframe + ufs) && i < 8; i++)
 				if (0 < tt_usecs[i]) {
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 958751c..c205078 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -122,7 +122,8 @@
 		process_inactive_qtd(whc, qset, td);
 	}
 
-	update |= qset_add_qtds(whc, qset);
+	if (!qset->remove)
+		update |= qset_add_qtds(whc, qset);
 
 done:
 	/*
@@ -254,23 +255,29 @@
 
 	spin_lock_irqsave(&whc->lock, flags);
 
+	err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+	if (err < 0) {
+		spin_unlock_irqrestore(&whc->lock, flags);
+		return err;
+	}
+
 	qset = get_qset(whc, urb, GFP_ATOMIC);
 	if (qset == NULL)
 		err = -ENOMEM;
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
 		if (!qset->in_sw_list)
 			asl_qset_insert_begin(whc, qset);
-	}
+	} else
+		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
 
 	spin_unlock_irqrestore(&whc->lock, flags);
 
 	if (!err)
 		queue_work(whc->workqueue, &whc->async_work);
 
-	return 0;
+	return err;
 }
 
 /**
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 1569afd..e019a50 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -186,6 +186,28 @@
 	}
 }
 
+static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
+			       struct usb_host_endpoint *ep)
+{
+	struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+	struct whc *whc = wusbhc_to_whc(wusbhc);
+	struct whc_qset *qset;
+
+	qset = ep->hcpriv;
+	if (qset) {
+		qset->remove = 1;
+
+		if (usb_endpoint_xfer_bulk(&ep->desc)
+		    || usb_endpoint_xfer_control(&ep->desc))
+			queue_work(whc->workqueue, &whc->async_work);
+		else
+			queue_work(whc->workqueue, &whc->periodic_work);
+
+		qset_reset(whc, qset);
+	}
+}
+
+
 static struct hc_driver whc_hc_driver = {
 	.description = "whci-hcd",
 	.product_desc = "Wireless host controller",
@@ -200,6 +222,7 @@
 	.urb_enqueue = whc_urb_enqueue,
 	.urb_dequeue = whc_urb_dequeue,
 	.endpoint_disable = whc_endpoint_disable,
+	.endpoint_reset = whc_endpoint_reset,
 
 	.hub_status_data = wusbhc_rh_status_data,
 	.hub_control = wusbhc_rh_control,
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index df8b85f..ff4ef9e 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -128,7 +128,8 @@
 		process_inactive_qtd(whc, qset, td);
 	}
 
-	update |= qset_add_qtds(whc, qset);
+	if (!qset->remove)
+		update |= qset_add_qtds(whc, qset);
 
 done:
 	/*
@@ -282,23 +283,29 @@
 
 	spin_lock_irqsave(&whc->lock, flags);
 
+	err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+	if (err < 0) {
+		spin_unlock_irqrestore(&whc->lock, flags);
+		return err;
+	}
+
 	qset = get_qset(whc, urb, GFP_ATOMIC);
 	if (qset == NULL)
 		err = -ENOMEM;
 	else
 		err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
 	if (!err) {
-		usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
 		if (!qset->in_sw_list)
 			qset_insert_in_sw_list(whc, qset);
-	}
+	} else
+		usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
 
 	spin_unlock_irqrestore(&whc->lock, flags);
 
 	if (!err)
 		queue_work(whc->workqueue, &whc->periodic_work);
 
-	return 0;
+	return err;
 }
 
 /**
@@ -353,7 +360,6 @@
 	qset_delete(whc, qset);
 }
 
-
 /**
  * pzl_init - initialize the periodic zone list
  * @whc: the WHCI host controller
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 7be7431..640b38f 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -89,11 +89,16 @@
 		QH_INFO3_TX_RATE_53_3
 		| QH_INFO3_TX_PWR(0) /* 0 == max power */
 		);
+
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
 }
 
 /**
  * qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule
+ * schedule.
+ *
+ * The sequence number and current window are not cleared (see
+ * qset_reset()).
  */
 void qset_clear(struct whc *whc, struct whc_qset *qset)
 {
@@ -101,9 +106,8 @@
 	qset->remove = 0;
 
 	qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
-	qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+	qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
 	qset->qh.err_count = 0;
-	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
 	qset->qh.scratch[0] = 0;
 	qset->qh.scratch[1] = 0;
 	qset->qh.scratch[2] = 0;
@@ -114,6 +118,20 @@
 }
 
 /**
+ * qset_reset - reset endpoint state in a qset.
+ *
+ * Clears the sequence number and current window.  This qset must not
+ * be in the ASL or PZL.
+ */
+void qset_reset(struct whc *whc, struct whc_qset *qset)
+{
+	wait_for_completion(&qset->remove_complete);
+
+	qset->qh.status &= ~QH_STATUS_SEQ_MASK;
+	qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+}
+
+/**
  * get_qset - get the qset for an async endpoint
  *
  * A new qset is created if one does not already exist.
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index d3543a1..24e94d9 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -184,6 +184,7 @@
 struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
 void qset_delete(struct whc *whc, struct whc_qset *qset);
 void qset_clear(struct whc *whc, struct whc_qset *qset);
+void qset_reset(struct whc *whc, struct whc_qset *qset);
 int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
 		 gfp_t mem_flags);
 void qset_free_std(struct whc *whc, struct whc_std *std);
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
index 51df7e3..794dba0 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -185,6 +185,7 @@
 #define QH_STATUS_FLOW_CTRL      (1 << 15)
 #define QH_STATUS_ICUR(i)        ((i) << 5)
 #define QH_STATUS_TO_ICUR(s)     (((s) >> 5) & 0x7)
+#define QH_STATUS_SEQ_MASK       0x1f
 
 /**
  * usb_pipe_to_qh_type - USB core pipe type to QH transfer type
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 569ef0f..1976e9b 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -579,6 +579,7 @@
 	 * trigger the "send a ZLP?" confusion.
 	 */
 	rndis = (maxpacket & 0x3f) == 0
+		&& length > maxpacket
 		&& length < 0xffff
 		&& (length % maxpacket) != 0;
 
@@ -1228,27 +1229,7 @@
 
 				hw_ep = tx_ch->hw_ep;
 
-				/* Peripheral role never repurposes the
-				 * endpoint, so immediate completion is
-				 * safe.  Host role waits for the fifo
-				 * to empty (TXPKTRDY irq) before going
-				 * to the next queued bulk transfer.
-				 */
-				if (is_host_active(cppi->musb)) {
-#if 0
-					/* WORKAROUND because we may
-					 * not always get TXKPTRDY ...
-					 */
-					int	csr;
-
-					csr = musb_readw(hw_ep->regs,
-						MUSB_TXCSR);
-					if (csr & MUSB_TXCSR_TXPKTRDY)
-#endif
-						completed = false;
-				}
-				if (completed)
-					musb_dma_completion(musb, index + 1, 1);
+				musb_dma_completion(musb, index + 1, 1);
 
 			} else {
 				/* Bigger transfer than we could fit in
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 338cd16..4000cf6 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2170,32 +2170,28 @@
 	return 0;
 }
 
-static int musb_resume(struct platform_device *pdev)
+static int musb_resume_early(struct platform_device *pdev)
 {
-	unsigned long	flags;
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
 	if (!musb->clock)
 		return 0;
 
-	spin_lock_irqsave(&musb->lock, flags);
-
 	if (musb->set_clock)
 		musb->set_clock(musb->clock, 1);
 	else
 		clk_enable(musb->clock);
 
 	/* for static cmos like DaVinci, register values were preserved
-	 * unless for some reason the whole soc powered down and we're
-	 * not treating that as a whole-system restart (e.g. swsusp)
+	 * unless for some reason the whole soc powered down or the USB
+	 * module got reset through the PSC (vs just being disabled).
 	 */
-	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
 
 #else
 #define	musb_suspend	NULL
-#define	musb_resume	NULL
+#define	musb_resume_early	NULL
 #endif
 
 static struct platform_driver musb_driver = {
@@ -2207,7 +2203,7 @@
 	.remove		= __devexit_p(musb_remove),
 	.shutdown	= musb_shutdown,
 	.suspend	= musb_suspend,
-	.resume		= musb_resume,
+	.resume_early	= musb_resume_early,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c7ebd08..f79440c 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -165,9 +165,15 @@
 	if (is_dma_capable() && ep->dma) {
 		struct dma_controller	*c = ep->musb->dma_controller;
 		int value;
+
 		if (ep->is_in) {
+			/*
+			 * The programming guide says that we must not clear
+			 * the DMAMODE bit before DMAENAB, so we only
+			 * clear it in the second write...
+			 */
 			musb_writew(epio, MUSB_TXCSR,
-					0 | MUSB_TXCSR_FLUSHFIFO);
+				    MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
 			musb_writew(epio, MUSB_TXCSR,
 					0 | MUSB_TXCSR_FLUSHFIFO);
 		} else {
@@ -230,7 +236,7 @@
 		  |	IN token(s) are recd from Host.
 		  |		-> DMA interrupt on completion
 		  |		   calls TxAvail.
-		  |		      -> stop DMA, ~DmaEenab,
+		  |		      -> stop DMA, ~DMAENAB,
 		  |		      -> set TxPktRdy for last short pkt or zlp
 		  |		      -> Complete Request
 		  |		      -> Continue next request (call txstate)
@@ -315,9 +321,17 @@
 					request->dma, request_size);
 			if (use_dma) {
 				if (musb_ep->dma->desired_mode == 0) {
-					/* ASSERT: DMAENAB is clear */
-					csr &= ~(MUSB_TXCSR_AUTOSET |
-							MUSB_TXCSR_DMAMODE);
+					/*
+					 * We must not clear the DMAMODE bit
+					 * before the DMAENAB bit -- and the
+					 * latter doesn't always get cleared
+					 * before we get here...
+					 */
+					csr &= ~(MUSB_TXCSR_AUTOSET
+						| MUSB_TXCSR_DMAENAB);
+					musb_writew(epio, MUSB_TXCSR, csr
+						| MUSB_TXCSR_P_WZC_BITS);
+					csr &= ~MUSB_TXCSR_DMAMODE;
 					csr |= (MUSB_TXCSR_DMAENAB |
 							MUSB_TXCSR_MODE);
 					/* against programming guide */
@@ -334,10 +348,7 @@
 
 #elif defined(CONFIG_USB_TI_CPPI_DMA)
 		/* program endpoint CSR first, then setup DMA */
-		csr &= ~(MUSB_TXCSR_AUTOSET
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_P_UNDERRUN
-				| MUSB_TXCSR_TXPKTRDY);
+		csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
 		csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
 		musb_writew(epio, MUSB_TXCSR,
 			(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
@@ -364,8 +375,8 @@
 		if (!use_dma) {
 			c->channel_release(musb_ep->dma);
 			musb_ep->dma = NULL;
-			/* ASSERT: DMAENAB clear */
-			csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+			csr &= ~MUSB_TXCSR_DMAENAB;
+			musb_writew(epio, MUSB_TXCSR, csr);
 			/* invariant: prequest->buf is non-null */
 		}
 #elif defined(CONFIG_USB_TUSB_OMAP_DMA)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 499c431..db1b574 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -4,6 +4,7 @@
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -96,8 +97,8 @@
 
 
 static void musb_ep_program(struct musb *musb, u8 epnum,
-			struct urb *urb, unsigned int nOut,
-			u8 *buf, u32 len);
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len);
 
 /*
  * Clear TX fifo. Needed to avoid BABBLE errors.
@@ -125,6 +126,29 @@
 	}
 }
 
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+	void __iomem	*epio = ep->regs;
+	u16		csr;
+	int		retries = 5;
+
+	/* scrub any data left in the fifo */
+	do {
+		csr = musb_readw(epio, MUSB_TXCSR);
+		if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+			break;
+		musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+		csr = musb_readw(epio, MUSB_TXCSR);
+		udelay(10);
+	} while (--retries);
+
+	WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+			ep->epnum, csr);
+
+	/* and reset for the next transfer */
+	musb_writew(epio, MUSB_TXCSR, 0);
+}
+
 /*
  * Start transmit. Caller is responsible for locking shared resources.
  * musb must be locked.
@@ -145,13 +169,15 @@
 
 }
 
-static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
 {
 	u16	txcsr;
 
 	/* NOTE: no locks here; caller should lock and select EP */
 	txcsr = musb_readw(ep->regs, MUSB_TXCSR);
 	txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+	if (is_cppi_enabled())
+		txcsr |= MUSB_TXCSR_DMAMODE;
 	musb_writew(ep->regs, MUSB_TXCSR, txcsr);
 }
 
@@ -166,9 +192,10 @@
 {
 	u16			frame;
 	u32			len;
-	void			*buf;
 	void __iomem		*mbase =  musb->mregs;
 	struct urb		*urb = next_urb(qh);
+	void			*buf = urb->transfer_buffer;
+	u32			offset = 0;
 	struct musb_hw_ep	*hw_ep = qh->hw_ep;
 	unsigned		pipe = urb->pipe;
 	u8			address = usb_pipedevice(pipe);
@@ -191,7 +218,7 @@
 	case USB_ENDPOINT_XFER_ISOC:
 		qh->iso_idx = 0;
 		qh->frame = 0;
-		buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+		offset = urb->iso_frame_desc[0].offset;
 		len = urb->iso_frame_desc[0].length;
 		break;
 	default:		/* bulk, interrupt */
@@ -209,14 +236,14 @@
 			case USB_ENDPOINT_XFER_ISOC:	s = "-iso"; break;
 			default:			s = "-intr"; break;
 			}; s; }),
-			epnum, buf, len);
+			epnum, buf + offset, len);
 
 	/* Configure endpoint */
 	if (is_in || hw_ep->is_shared_fifo)
 		hw_ep->in_qh = qh;
 	else
 		hw_ep->out_qh = qh;
-	musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+	musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
 
 	/* transmit may have more work: start it when it is time */
 	if (is_in)
@@ -227,7 +254,6 @@
 	case USB_ENDPOINT_XFER_ISOC:
 	case USB_ENDPOINT_XFER_INT:
 		DBG(3, "check whether there's still time for periodic Tx\n");
-		qh->iso_idx = 0;
 		frame = musb_readw(mbase, MUSB_FRAME);
 		/* FIXME this doesn't implement that scheduling policy ...
 		 * or handle framecounter wrapping
@@ -256,7 +282,7 @@
 		if (!hw_ep->tx_channel)
 			musb_h_tx_start(hw_ep);
 		else if (is_cppi_enabled() || tusb_dma_omap())
-			cppi_host_txdma_start(hw_ep);
+			musb_h_tx_dma_start(hw_ep);
 	}
 }
 
@@ -567,10 +593,17 @@
 		csr = musb_readw(ep->regs, MUSB_TXCSR);
 		if (csr & MUSB_TXCSR_MODE) {
 			musb_h_tx_flush_fifo(ep);
+			csr = musb_readw(ep->regs, MUSB_TXCSR);
 			musb_writew(ep->regs, MUSB_TXCSR,
-					MUSB_TXCSR_FRCDATATOG);
+				    csr | MUSB_TXCSR_FRCDATATOG);
 		}
-		/* clear mode (and everything else) to enable Rx */
+
+		/*
+		 * Clear the MODE bit (and everything else) to enable Rx.
+		 * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+		 */
+		if (csr & MUSB_TXCSR_DMAMODE)
+			musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
 		musb_writew(ep->regs, MUSB_TXCSR, 0);
 
 	/* scrub all previous state, clearing toggle */
@@ -601,14 +634,68 @@
 	ep->rx_reinit = 0;
 }
 
+static bool musb_tx_dma_program(struct dma_controller *dma,
+		struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+		struct urb *urb, u32 offset, u32 length)
+{
+	struct dma_channel	*channel = hw_ep->tx_channel;
+	void __iomem		*epio = hw_ep->regs;
+	u16			pkt_size = qh->maxpacket;
+	u16			csr;
+	u8			mode;
+
+#ifdef	CONFIG_USB_INVENTRA_DMA
+	if (length > channel->max_len)
+		length = channel->max_len;
+
+	csr = musb_readw(epio, MUSB_TXCSR);
+	if (length > pkt_size) {
+		mode = 1;
+		csr |= MUSB_TXCSR_AUTOSET
+			| MUSB_TXCSR_DMAMODE
+			| MUSB_TXCSR_DMAENAB;
+	} else {
+		mode = 0;
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+		csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+	}
+	channel->desired_mode = mode;
+	musb_writew(epio, MUSB_TXCSR, csr);
+#else
+	if (!is_cppi_enabled() && !tusb_dma_omap())
+		return false;
+
+	channel->actual_len = 0;
+
+	/*
+	 * TX uses "RNDIS" mode automatically but needs help
+	 * to identify the zero-length-final-packet case.
+	 */
+	mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+	qh->segsize = length;
+
+	if (!dma->channel_program(channel, pkt_size, mode,
+			urb->transfer_dma + offset, length)) {
+		dma->channel_release(channel);
+		hw_ep->tx_channel = NULL;
+
+		csr = musb_readw(epio, MUSB_TXCSR);
+		csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+		musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+		return false;
+	}
+	return true;
+}
 
 /*
  * Program an HDRC endpoint as per the given URB
  * Context: irqs blocked, controller lock held
  */
 static void musb_ep_program(struct musb *musb, u8 epnum,
-			struct urb *urb, unsigned int is_out,
-			u8 *buf, u32 len)
+			struct urb *urb, int is_out,
+			u8 *buf, u32 offset, u32 len)
 {
 	struct dma_controller	*dma_controller;
 	struct dma_channel	*dma_channel;
@@ -667,12 +754,17 @@
 
 		/* general endpoint setup */
 		if (epnum) {
-			/* ASSERT:  TXCSR_DMAENAB was already cleared */
-
 			/* flush all old state, set default */
 			musb_h_tx_flush_fifo(hw_ep);
+
+			/*
+			 * We must not clear the DMAMODE bit before or in
+			 * the same cycle with the DMAENAB bit, so we clear
+			 * the latter first...
+			 */
 			csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
-					| MUSB_TXCSR_DMAMODE
+					| MUSB_TXCSR_AUTOSET
+					| MUSB_TXCSR_DMAENAB
 					| MUSB_TXCSR_FRCDATATOG
 					| MUSB_TXCSR_H_RXSTALL
 					| MUSB_TXCSR_H_ERROR
@@ -680,24 +772,20 @@
 					);
 			csr |= MUSB_TXCSR_MODE;
 
-			if (usb_gettoggle(urb->dev,
-					qh->epnum, 1))
+			if (usb_gettoggle(urb->dev, qh->epnum, 1))
 				csr |= MUSB_TXCSR_H_WR_DATATOGGLE
 					| MUSB_TXCSR_H_DATATOGGLE;
 			else
 				csr |= MUSB_TXCSR_CLRDATATOG;
 
-			/* twice in case of double packet buffering */
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* REVISIT may need to clear FLUSHFIFO ... */
+			csr &= ~MUSB_TXCSR_DMAMODE;
 			musb_writew(epio, MUSB_TXCSR, csr);
 			csr = musb_readw(epio, MUSB_TXCSR);
 		} else {
 			/* endpoint 0: just flush */
-			musb_writew(epio, MUSB_CSR0,
-				csr | MUSB_CSR0_FLUSHFIFO);
-			musb_writew(epio, MUSB_CSR0,
-				csr | MUSB_CSR0_FLUSHFIFO);
+			musb_h_ep0_flush_fifo(hw_ep);
 		}
 
 		/* target addr and (for multipoint) hub addr/port */
@@ -734,113 +822,14 @@
 		else
 			load_count = min((u32) packet_sz, len);
 
-#ifdef CONFIG_USB_INVENTRA_DMA
-		if (dma_channel) {
-
-			/* clear previous state */
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_AUTOSET
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_DMAENAB);
-			csr |= MUSB_TXCSR_MODE;
-			musb_writew(epio, MUSB_TXCSR,
-				csr | MUSB_TXCSR_MODE);
-
-			qh->segsize = min(len, dma_channel->max_len);
-
-			if (qh->segsize <= packet_sz)
-				dma_channel->desired_mode = 0;
-			else
-				dma_channel->desired_mode = 1;
-
-
-			if (dma_channel->desired_mode == 0) {
-				csr &= ~(MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAMODE);
-				csr |= (MUSB_TXCSR_DMAENAB);
-					/* against programming guide */
-			} else
-				csr |= (MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAENAB
-					| MUSB_TXCSR_DMAMODE);
-
-			musb_writew(epio, MUSB_TXCSR, csr);
-
-			dma_ok = dma_controller->channel_program(
-					dma_channel, packet_sz,
-					dma_channel->desired_mode,
-					urb->transfer_dma,
-					qh->segsize);
-			if (dma_ok) {
-				load_count = 0;
-			} else {
-				dma_controller->channel_release(dma_channel);
-				if (is_out)
-					hw_ep->tx_channel = NULL;
-				else
-					hw_ep->rx_channel = NULL;
-				dma_channel = NULL;
-			}
-		}
-#endif
-
-		/* candidate for DMA */
-		if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
-			/* program endpoint CSRs first, then setup DMA.
-			 * assume CPPI setup succeeds.
-			 * defer enabling dma.
-			 */
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_AUTOSET
-					| MUSB_TXCSR_DMAMODE
-					| MUSB_TXCSR_DMAENAB);
-			csr |= MUSB_TXCSR_MODE;
-			musb_writew(epio, MUSB_TXCSR,
-				csr | MUSB_TXCSR_MODE);
-
-			dma_channel->actual_len = 0L;
-			qh->segsize = len;
-
-			/* TX uses "rndis" mode automatically, but needs help
-			 * to identify the zero-length-final-packet case.
-			 */
-			dma_ok = dma_controller->channel_program(
-					dma_channel, packet_sz,
-					(urb->transfer_flags
-							& URB_ZERO_PACKET)
-						== URB_ZERO_PACKET,
-					urb->transfer_dma,
-					qh->segsize);
-			if (dma_ok) {
-				load_count = 0;
-			} else {
-				dma_controller->channel_release(dma_channel);
-				hw_ep->tx_channel = NULL;
-				dma_channel = NULL;
-
-				/* REVISIT there's an error path here that
-				 * needs handling:  can't do dma, but
-				 * there's no pio buffer address...
-				 */
-			}
-		}
+		if (dma_channel && musb_tx_dma_program(dma_controller,
+					hw_ep, qh, urb, offset, len))
+			load_count = 0;
 
 		if (load_count) {
-			/* ASSERT:  TXCSR_DMAENAB was already cleared */
-
 			/* PIO to load FIFO */
 			qh->segsize = load_count;
 			musb_write_fifo(hw_ep, load_count, buf);
-			csr = musb_readw(epio, MUSB_TXCSR);
-			csr &= ~(MUSB_TXCSR_DMAENAB
-				| MUSB_TXCSR_DMAMODE
-				| MUSB_TXCSR_AUTOSET);
-			/* write CSR */
-			csr |= MUSB_TXCSR_MODE;
-
-			if (epnum)
-				musb_writew(epio, MUSB_TXCSR, csr);
 		}
 
 		/* re-enable interrupt */
@@ -895,7 +884,7 @@
 						dma_channel, packet_sz,
 						!(urb->transfer_flags
 							& URB_SHORT_NOT_OK),
-						urb->transfer_dma,
+						urb->transfer_dma + offset,
 						qh->segsize);
 				if (!dma_ok) {
 					dma_controller->channel_release(
@@ -1063,11 +1052,7 @@
 			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
 			musb_writew(epio, MUSB_CSR0, csr);
 		} else {
-			csr |= MUSB_CSR0_FLUSHFIFO;
-			musb_writew(epio, MUSB_CSR0, csr);
-			musb_writew(epio, MUSB_CSR0, csr);
-			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
-			musb_writew(epio, MUSB_CSR0, csr);
+			musb_h_ep0_flush_fifo(hw_ep);
 		}
 
 		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
@@ -1081,10 +1066,7 @@
 		 * SHOULD NEVER HAPPEN! */
 		ERR("no URB for end 0\n");
 
-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
-		musb_writew(epio, MUSB_CSR0, 0);
-
+		musb_h_ep0_flush_fifo(hw_ep);
 		goto done;
 	}
 
@@ -1145,8 +1127,8 @@
 	int			pipe;
 	bool			done = false;
 	u16			tx_csr;
-	size_t			wLength = 0;
-	u8			*buf = NULL;
+	size_t			length = 0;
+	size_t			offset = 0;
 	struct urb		*urb;
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
 	void __iomem		*epio = hw_ep->regs;
@@ -1164,7 +1146,7 @@
 	/* with CPPI, DMA sometimes triggers "extra" irqs */
 	if (!urb) {
 		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
-		goto finish;
+		return;
 	}
 
 	pipe = urb->pipe;
@@ -1201,7 +1183,7 @@
 		musb_writew(epio, MUSB_TXCSR,
 				MUSB_TXCSR_H_WZC_BITS
 				| MUSB_TXCSR_TXPKTRDY);
-		goto finish;
+		return;
 	}
 
 	if (status) {
@@ -1233,29 +1215,89 @@
 	/* second cppi case */
 	if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
 		DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
-		goto finish;
-
+		return;
 	}
 
-	/* REVISIT this looks wrong... */
+	if (is_dma_capable() && dma && !status) {
+		/*
+		 * DMA has completed.  But if we're using DMA mode 1 (multi
+		 * packet DMA), we need a terminal TXPKTRDY interrupt before
+		 * we can consider this transfer completed, lest we trash
+		 * its last packet when writing the next URB's data.  So we
+		 * switch back to mode 0 to get that interrupt; we'll come
+		 * back here once it happens.
+		 */
+		if (tx_csr & MUSB_TXCSR_DMAMODE) {
+			/*
+			 * We shouldn't clear DMAMODE with DMAENAB set; so
+			 * clear them in a safe order.  That should be OK
+			 * once TXPKTRDY has been set (and I've never seen
+			 * it being 0 at this moment -- DMA interrupt latency
+			 * is significant) but if it hasn't been then we have
+			 * no choice but to stop being polite and ignore the
+			 * programmer's guide... :-)
+			 *
+			 * Note that we must write TXCSR with TXPKTRDY cleared
+			 * in order not to re-trigger the packet send (this bit
+			 * can't be cleared by CPU), and there's another caveat:
+			 * TXPKTRDY may be set shortly and then cleared in the
+			 * double-buffered FIFO mode, so we do an extra TXCSR
+			 * read for debouncing...
+			 */
+			tx_csr &= musb_readw(epio, MUSB_TXCSR);
+			if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+				tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+					    MUSB_TXCSR_TXPKTRDY);
+				musb_writew(epio, MUSB_TXCSR,
+					    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+			}
+			tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+				    MUSB_TXCSR_TXPKTRDY);
+			musb_writew(epio, MUSB_TXCSR,
+				    tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+			/*
+			 * There is no guarantee that we'll get an interrupt
+			 * after clearing DMAMODE as we might have done this
+			 * too late (after TXPKTRDY was cleared by controller).
+			 * Re-read TXCSR as we have spoiled its previous value.
+			 */
+			tx_csr = musb_readw(epio, MUSB_TXCSR);
+		}
+
+		/*
+		 * We may get here from a DMA completion or TXPKTRDY interrupt.
+		 * In any case, we must check the FIFO status here and bail out
+		 * only if the FIFO still has data -- that should prevent the
+		 * "missed" TXPKTRDY interrupts and deal with double-buffered
+		 * FIFO mode too...
+		 */
+		if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+			DBG(2, "DMA complete but packet still in FIFO, "
+			    "CSR %04x\n", tx_csr);
+			return;
+		}
+	}
+
 	if (!status || dma || usb_pipeisoc(pipe)) {
 		if (dma)
-			wLength = dma->actual_len;
+			length = dma->actual_len;
 		else
-			wLength = qh->segsize;
-		qh->offset += wLength;
+			length = qh->segsize;
+		qh->offset += length;
 
 		if (usb_pipeisoc(pipe)) {
 			struct usb_iso_packet_descriptor	*d;
 
 			d = urb->iso_frame_desc + qh->iso_idx;
-			d->actual_length = qh->segsize;
+			d->actual_length = length;
+			d->status = status;
 			if (++qh->iso_idx >= urb->number_of_packets) {
 				done = true;
 			} else {
 				d++;
-				buf = urb->transfer_buffer + d->offset;
-				wLength = d->length;
+				offset = d->offset;
+				length = d->length;
 			}
 		} else if (dma) {
 			done = true;
@@ -1268,10 +1310,8 @@
 						& URB_ZERO_PACKET))
 				done = true;
 			if (!done) {
-				buf = urb->transfer_buffer
-						+ qh->offset;
-				wLength = urb->transfer_buffer_length
-						- qh->offset;
+				offset = qh->offset;
+				length = urb->transfer_buffer_length - offset;
 			}
 		}
 	}
@@ -1290,28 +1330,31 @@
 		urb->status = status;
 		urb->actual_length = qh->offset;
 		musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+		return;
+	} else	if (usb_pipeisoc(pipe) && dma) {
+		if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+				offset, length))
+			return;
+	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
+		DBG(1, "not complete, but DMA enabled?\n");
+		return;
+	}
 
-	} else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
-		/* WARN_ON(!buf); */
+	/*
+	 * PIO: start next packet in this URB.
+	 *
+	 * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+	 * (and presumably, FIFO is not half-full) we should write *two*
+	 * packets before updating TXCSR; other docs disagree...
+	 */
+	if (length > qh->maxpacket)
+		length = qh->maxpacket;
+	musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+	qh->segsize = length;
 
-		/* REVISIT:  some docs say that when hw_ep->tx_double_buffered,
-		 * (and presumably, fifo is not half-full) we should write TWO
-		 * packets before updating TXCSR ... other docs disagree ...
-		 */
-		/* PIO:  start next packet in this URB */
-		if (wLength > qh->maxpacket)
-			wLength = qh->maxpacket;
-		musb_write_fifo(hw_ep, wLength, buf);
-		qh->segsize = wLength;
-
-		musb_ep_select(mbase, epnum);
-		musb_writew(epio, MUSB_TXCSR,
-				MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
-	} else
-		DBG(1, "not complete, but dma enabled?\n");
-
-finish:
-	return;
+	musb_ep_select(mbase, epnum);
+	musb_writew(epio, MUSB_TXCSR,
+			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
 }
 
 
@@ -1841,7 +1884,7 @@
 	unsigned long			flags;
 	struct musb			*musb = hcd_to_musb(hcd);
 	struct usb_host_endpoint	*hep = urb->ep;
-	struct musb_qh			*qh = hep->hcpriv;
+	struct musb_qh			*qh;
 	struct usb_endpoint_descriptor	*epd = &hep->desc;
 	int				ret;
 	unsigned			type_reg;
@@ -1853,22 +1896,21 @@
 
 	spin_lock_irqsave(&musb->lock, flags);
 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	qh = ret ? NULL : hep->hcpriv;
+	if (qh)
+		urb->hcpriv = qh;
 	spin_unlock_irqrestore(&musb->lock, flags);
-	if (ret)
-		return ret;
 
 	/* DMA mapping was already done, if needed, and this urb is on
-	 * hep->urb_list ... so there's little to do unless hep wasn't
-	 * yet scheduled onto a live qh.
+	 * hep->urb_list now ... so we're done, unless hep wasn't yet
+	 * scheduled onto a live qh.
 	 *
 	 * REVISIT best to keep hep->hcpriv valid until the endpoint gets
 	 * disabled, testing for empty qh->ring and avoiding qh setup costs
 	 * except for the first urb queued after a config change.
 	 */
-	if (qh) {
-		urb->hcpriv = qh;
-		return 0;
-	}
+	if (qh || ret)
+		return ret;
 
 	/* Allocate and initialize qh, minimizing the work done each time
 	 * hw_ep gets reprogrammed, or with irqs blocked.  Then schedule it.
@@ -2044,7 +2086,7 @@
 		 * endpoint's irq status here to avoid bogus irqs.
 		 * clearing that status is platform-specific...
 		 */
-	} else {
+	} else if (ep->epnum) {
 		musb_h_tx_flush_fifo(ep);
 		csr = musb_readw(epio, MUSB_TXCSR);
 		csr &= ~(MUSB_TXCSR_AUTOSET
@@ -2058,6 +2100,8 @@
 		musb_writew(epio, MUSB_TXCSR, csr);
 		/* flush cpu writebuffer */
 		csr = musb_readw(epio, MUSB_TXCSR);
+	} else  {
+		musb_h_ep0_flush_fifo(ep);
 	}
 	if (status == 0)
 		musb_advance_schedule(ep->musb, urb, ep, is_in);
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 8662e9e..5e83f96 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -195,30 +195,32 @@
 	void __iomem *mbase = musb_channel->controller->base;
 
 	u8 bchannel = musb_channel->idx;
+	int offset;
 	u16 csr;
 
 	if (channel->status == MUSB_DMA_STATUS_BUSY) {
 		if (musb_channel->transmit) {
+			offset = MUSB_EP_OFFSET(musb_channel->epnum,
+						MUSB_TXCSR);
 
-			csr = musb_readw(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum,
-						MUSB_TXCSR));
-			csr &= ~(MUSB_TXCSR_AUTOSET |
-				 MUSB_TXCSR_DMAENAB |
-				 MUSB_TXCSR_DMAMODE);
-			musb_writew(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR),
-				csr);
+			/*
+			 * The programming guide says that we must clear
+			 * the DMAENAB bit before the DMAMODE bit...
+			 */
+			csr = musb_readw(mbase, offset);
+			csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+			musb_writew(mbase, offset, csr);
+			csr &= ~MUSB_TXCSR_DMAMODE;
+			musb_writew(mbase, offset, csr);
 		} else {
-			csr = musb_readw(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum,
-						MUSB_RXCSR));
+			offset = MUSB_EP_OFFSET(musb_channel->epnum,
+						MUSB_RXCSR);
+
+			csr = musb_readw(mbase, offset);
 			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
 				 MUSB_RXCSR_DMAENAB |
 				 MUSB_RXCSR_DMAMODE);
-			musb_writew(mbase,
-				MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR),
-				csr);
+			musb_writew(mbase, offset, csr);
 		}
 
 		musb_writew(mbase,
@@ -296,20 +298,28 @@
 					&& ((channel->desired_mode == 0)
 					    || (channel->actual_len &
 					    (musb_channel->max_packet_sz - 1)))
-					 ) {
+				    ) {
+					u8  epnum  = musb_channel->epnum;
+					int offset = MUSB_EP_OFFSET(epnum,
+								    MUSB_TXCSR);
+					u16 txcsr;
+
+					/*
+					 * The programming guide says that we
+					 * must clear DMAENAB before DMAMODE.
+					 */
+					musb_ep_select(mbase, epnum);
+					txcsr = musb_readw(mbase, offset);
+					txcsr &= ~(MUSB_TXCSR_DMAENAB
+							| MUSB_TXCSR_AUTOSET);
+					musb_writew(mbase, offset, txcsr);
 					/* Send out the packet */
-					musb_ep_select(mbase,
-						musb_channel->epnum);
-					musb_writew(mbase, MUSB_EP_OFFSET(
-							musb_channel->epnum,
-							MUSB_TXCSR),
-						MUSB_TXCSR_TXPKTRDY);
-				} else {
-					musb_dma_completion(
-						musb,
-						musb_channel->epnum,
-						musb_channel->transmit);
+					txcsr &= ~MUSB_TXCSR_DMAMODE;
+					txcsr |=  MUSB_TXCSR_TXPKTRDY;
+					musb_writew(mbase, offset, txcsr);
 				}
+				musb_dma_completion(musb, musb_channel->epnum,
+						    musb_channel->transmit);
 			}
 		}
 	}
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 901dffd..60924ce 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -3,7 +3,6 @@
  * Some code has been taken from tusb6010.c
  * Copyrights for that are attributable to:
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This file is part of the Inventra Controller Driver for Linux.
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 9e20fd0..4ac1477 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -2,7 +2,6 @@
  * TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index ab8c962..35c933a 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -2,7 +2,6 @@
  * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
  *
  * Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
  * Tony Lindgren <tony@atomide.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index ff318fa..0a43a7d 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -43,7 +43,8 @@
  */
 void otg_put_transceiver(struct otg_transceiver *x)
 {
-	put_device(x->dev);
+	if (x)
+		put_device(x->dev);
 }
 EXPORT_SYMBOL(otg_put_transceiver);
 
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 858bdd0..dd501bb 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -175,13 +175,6 @@
 	dbg("%s - usb_clear_halt", __func__);
 	usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through, otherwise it is scheduled, and with high
-	 * data rates (like with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	priv = usb_get_serial_port_data(port);
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->rdtodo = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index eae4740..e568710 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -656,10 +656,6 @@
 	priv->rx_flags = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* setting to zero could cause data loss */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* raise both lines and set termios */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_control = CONTROL_DTR | CONTROL_RTS;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8a69cce..c709ec4 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -478,12 +478,6 @@
 	termios->c_cflag
 		|= CS8;		/* character size 8 bits */
 
-	/*
-	 * Force low_latency on; otherwise the pushes are scheduled;
-	 * this is bad as it opens up the possibility of dropping bytes
-	 * on the floor.  We don't want to drop bytes on the floor. :)
-	 */
-	tty->low_latency = 1;
 	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index dcc87aa..8100f1d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -668,6 +668,7 @@
 	{ USB_DEVICE(DE_VID, WHT_PID) },
 	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index daaf63d..c09f658 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -913,6 +913,13 @@
 #define ADI_GNICE_PID 		0xF000
 
 /*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID		0x0c6c
+#define JETI_SPC1201_PID	0x04b2
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index a26a0e2..586d30f 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -973,14 +973,6 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->mode  = initial_mode;
 	garmin_data_p->count = 0;
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 9d57cac..4cec990 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -122,12 +122,6 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces the data
-	   through, otherwise it is scheduled, and with high data rates (like
-	   with OHCI) data can get lost. */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* clear the throttle flags */
 	spin_lock_irqsave(&port->lock, flags);
 	port->throttled = 0;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e85c8c0..fb4a73d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -193,8 +193,6 @@
 /* local variables */
 static int debug;
 
-static int low_latency = 1;	/* tty low latency flag, on by default */
-
 static atomic_t CmdUrbs;	/* Number of outstanding Command Write Urbs */
 
 
@@ -867,9 +865,6 @@
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (tty)
-		tty->low_latency = low_latency;
-
 	/* see if we've set up our endpoint info yet (can't set it up
 	   in edge_startup as the structures were not set up at that time.) */
 	serial = port->serial;
@@ -3299,6 +3294,3 @@
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c3cdd00..513b25e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -76,7 +76,6 @@
 #define EDGE_READ_URB_STOPPING	1
 #define EDGE_READ_URB_STOPPED	2
 
-#define EDGE_LOW_LATENCY	1
 #define EDGE_CLOSING_WAIT	4000	/* in .01 sec */
 
 #define EDGE_OUT_BUF_SIZE	1024
@@ -232,7 +231,6 @@
 
 static int debug;
 
-static int low_latency = EDGE_LOW_LATENCY;
 static int closing_wait = EDGE_CLOSING_WAIT;
 static int ignore_cpu_rev;
 static int default_uart_mode;		/* RS232 */
@@ -1850,9 +1848,6 @@
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (tty)
-		tty->low_latency = low_latency;
-
 	port_number = port->number - port->serial->minor;
 	switch (port_number) {
 	case 0:
@@ -3008,9 +3003,6 @@
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Debug enabled or not");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ef92095..cd62825 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -631,13 +631,7 @@
 		priv->free_len += PACKET_SIZE;
 	}
 
-	/*
-	 * Force low latency on. This will immediately push data to the line
-	 * discipline instead of queueing.
-	 */
-
 	if (tty) {
-		tty->low_latency = 1;
 		/* FIXME: These two are bogus */
 		tty->raw = 1;
 		tty->real_raw = 1;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index f530032..da2a2b4 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -207,9 +207,6 @@
 	if (!buf_flow_init)
 		return -ENOMEM;
 
-	if (tty)
-		tty->low_latency = 1;
-
 	/* --1: Tell the modem to initialize (we think) From sniffs this is
 	 *	always the first thing that gets sent to the modem during
 	 *	opening of the device */
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 2314c6a..4473d44 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1051,7 +1051,6 @@
 		tty->termios->c_oflag = 0;
 		tty->termios->c_iflag = 0;
 		priv->termios_initialized = 1;
-		tty->low_latency = 1;
 		priv->poll = 0;
 	 }
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 6286baa..c148544 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -231,13 +231,7 @@
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
-
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through, otherwise it is scheduled, and with high
-	 * data rates (like with OHCI) data can get lost.
-	 */
 	if (tty) {
-		tty->low_latency = 1;
 
 		/* Default to echo off and other sane device settings */
 		tty->termios->c_lflag = 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index e772cc0..24e3b5d 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -446,13 +446,6 @@
 	data = 0x0c;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-
-	if (tty)
-		tty->low_latency = 1;
-
 	/* see if we've set up our endpoint info yet   *
 	 * (can't set it up in mos7720_startup as the  *
 	 * structures were not set up at that time.)   */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c20e88..84fb1dc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -38,7 +38,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
 #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
 
 /*
@@ -123,6 +123,11 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ *  - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL		0x0557
+#define ATENINTL_DEVICE_ID_UC2324	0x2011
+
 /* Interrupt Routine Defines    */
 
 #define SERIAL_IIR_RLS      0x06
@@ -170,6 +175,7 @@
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{}			/* terminating entry */
 };
 
@@ -178,6 +184,7 @@
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{}			/* terminating entry */
 };
 
@@ -1000,12 +1007,6 @@
 	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
 									Data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Check to see if we've set up our endpoint info yet    *
 	 * (can't set it up in mos7840_startup as the structures *
 	 * were not set up at that time.)                        */
@@ -2477,9 +2478,14 @@
 		mos7840_set_port_private(serial->port[i], mos7840_port);
 		spin_lock_init(&mos7840_port->pool_lock);
 
-		mos7840_port->port_num = ((serial->port[i]->number -
-					   (serial->port[i]->serial->minor)) +
-					  1);
+		/* minor is not initialised until later by
+		 * usb-serial.c:get_free_serial() and cannot therefore be used
+		 * to index device instances */
+		mos7840_port->port_num = i + 1;
+		dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+		dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+		dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+		dbg ("serial->minor = %d", serial->minor);
 
 		if (mos7840_port->port_num == 1) {
 			mos7840_port->SpRegOffset = 0x0;
@@ -2690,13 +2696,16 @@
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-		mos7840_port->zombie = 1;
-		spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
-		usb_kill_urb(mos7840_port->control_urb);
-		kfree(mos7840_port->ctrl_buf);
-		kfree(mos7840_port->dr);
-		kfree(mos7840_port);
+		dbg ("mos7840_port %d = %p", i, mos7840_port);
+		if (mos7840_port) {
+			spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+			mos7840_port->zombie = 1;
+			spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+			usb_kill_urb(mos7840_port->control_urb);
+			kfree(mos7840_port->ctrl_buf);
+			kfree(mos7840_port->dr);
+			kfree(mos7840_port);
+		}
 		mos7840_set_port_private(serial->port[i], NULL);
 	}
 
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 2e8e054..b66b71c 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -25,6 +25,7 @@
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */
 	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Mororola phone */
 	{ USB_DEVICE(0x22b8, 0x2a64) },	/* Motorola KRZR K1m */
+	{ USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 839583d..b500ad1 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -159,14 +159,6 @@
 	priv->port = port;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Start reading from the device */
 	usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
 			  usb_rcvbulkpipe(priv->udev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d560c0b..7817b82 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -300,6 +300,10 @@
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
 
+#define DLINK_VENDOR_ID				0x1186
+#define DLINK_PRODUCT_DWM_652			0x3e04
+
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -516,6 +520,7 @@
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
 	{ } /* Terminating entry */
 };
@@ -931,9 +936,6 @@
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	if (tty)
-		tty->low_latency = 1;
-
 	option_send_setup(tty, port);
 
 	return 0;
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index e6d6b0c..7528b8d 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -26,6 +26,27 @@
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */
+	{USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */
+	{USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */
+	{USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */
+	{USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */
+	{USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */
+	{USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */
+	{USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */
+	{USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d9bf9a5..913225c 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -259,9 +259,21 @@
 			val |= 0x02;
 
 		/* If composite device then properly report interface */
-		if (serial->num_ports == 1)
+		if (serial->num_ports == 1) {
 			interface = sierra_calc_interface(serial);
 
+			/* Control message is sent only to interfaces with
+			 * interrupt_in endpoints
+			 */
+			if (port->interrupt_in_urb) {
+				/* send control message */
+				return usb_control_msg(serial->dev,
+					usb_rcvctrlpipe(serial->dev, 0),
+					0x22, 0x21, val, interface,
+					NULL, 0, USB_CTRL_SET_TIMEOUT);
+			}
+		}
+
 		/* Otherwise the need to do non-composite mapping */
 		else {
 			if (port->bulk_out_endpointAddress == 2)
@@ -270,12 +282,13 @@
 				interface = 1;
 			else if (port->bulk_out_endpointAddress == 5)
 				interface = 2;
-		}
 
-		return usb_control_msg(serial->dev,
+			return usb_control_msg(serial->dev,
 				usb_rcvctrlpipe(serial->dev, 0),
 				0x22, 0x21, val, interface,
 				NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+		}
 	}
 
 	return 0;
@@ -585,9 +598,6 @@
 		}
 	}
 
-	if (tty)
-		tty->low_latency = 1;
-
 	sierra_send_setup(tty, port);
 
 	/* start up the interrupt endpoint if we have one */
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9c4c700..0a64bac 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -50,11 +50,10 @@
 
 #define TI_TRANSFER_TIMEOUT	2
 
-#define TI_DEFAULT_LOW_LATENCY	0
 #define TI_DEFAULT_CLOSING_WAIT	4000		/* in .01 secs */
 
 /* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS	(ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS	0
 
 /* read urb states */
 #define TI_READ_URB_RUNNING	0
@@ -161,7 +160,6 @@
 
 /* module parameters */
 static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
 static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
 static unsigned int vendor_3410_count;
@@ -296,10 +294,6 @@
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
-		"TTY low_latency flag, 0=off, 1=on, default is off");
-
 module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(closing_wait,
     "Maximum wait for data to drain in close, in .01 secs, default is 4000");
@@ -448,7 +442,6 @@
 		spin_lock_init(&tport->tp_lock);
 		tport->tp_uart_base_addr = (i == 0 ?
 				TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
-		tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
 		tport->tp_closing_wait = closing_wait;
 		init_waitqueue_head(&tport->tp_msr_wait);
 		init_waitqueue_head(&tport->tp_write_wait);
@@ -528,10 +521,6 @@
 	if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 		return -ERESTARTSYS;
 
-	if (tty)
-		tty->low_latency =
-				(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
 	port_number = port->number - port->serial->minor;
 
 	memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
@@ -1454,7 +1443,6 @@
 		return -EFAULT;
 
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	tport->tp_closing_wait = new_serial.closing_wait;
 
 	return 0;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 2a70563..0a566ee 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -137,22 +137,10 @@
 
 	dbg("%s - %s", __func__, serial->type->description);
 
-	serial->type->shutdown(serial);
-
 	/* return the minor range that this device had */
 	if (serial->minor != SERIAL_TTY_NO_MINOR)
 		return_serial(serial);
 
-	for (i = 0; i < serial->num_ports; ++i)
-		serial->port[i]->port.count = 0;
-
-	/* the ports are cleaned up and released in port_release() */
-	for (i = 0; i < serial->num_ports; ++i)
-		if (serial->port[i]->dev.parent != NULL) {
-			device_unregister(&serial->port[i]->dev);
-			serial->port[i] = NULL;
-		}
-
 	/* If this is a "fake" port, we have to clean it up here, as it will
 	 * not get cleaned up in port_release() as it was never registered with
 	 * the driver core */
@@ -187,7 +175,7 @@
 	struct usb_serial *serial;
 	struct usb_serial_port *port;
 	unsigned int portNumber;
-	int retval;
+	int retval = 0;
 
 	dbg("%s", __func__);
 
@@ -198,21 +186,24 @@
 		return -ENODEV;
 	}
 
+	mutex_lock(&serial->disc_mutex);
 	portNumber = tty->index - serial->minor;
 	port = serial->port[portNumber];
-	if (!port) {
+	if (!port || serial->disconnected)
 		retval = -ENODEV;
-		goto bailout_kref_put;
-	}
-
-	if (port->serial->disconnected) {
-		retval = -ENODEV;
-		goto bailout_kref_put;
-	}
+	else
+		get_device(&port->dev);
+	/*
+	 * Note: Our locking order requirement does not allow port->mutex
+	 * to be acquired while serial->disc_mutex is held.
+	 */
+	mutex_unlock(&serial->disc_mutex);
+	if (retval)
+		goto bailout_serial_put;
 
 	if (mutex_lock_interruptible(&port->mutex)) {
 		retval = -ERESTARTSYS;
-		goto bailout_kref_put;
+		goto bailout_port_put;
 	}
 
 	++port->port.count;
@@ -232,14 +223,20 @@
 			goto bailout_mutex_unlock;
 		}
 
-		retval = usb_autopm_get_interface(serial->interface);
+		mutex_lock(&serial->disc_mutex);
+		if (serial->disconnected)
+			retval = -ENODEV;
+		else
+			retval = usb_autopm_get_interface(serial->interface);
 		if (retval)
 			goto bailout_module_put;
+
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		retval = serial->type->open(tty, port, filp);
 		if (retval)
 			goto bailout_interface_put;
+		mutex_unlock(&serial->disc_mutex);
 	}
 
 	mutex_unlock(&port->mutex);
@@ -248,13 +245,16 @@
 bailout_interface_put:
 	usb_autopm_put_interface(serial->interface);
 bailout_module_put:
+	mutex_unlock(&serial->disc_mutex);
 	module_put(serial->type->driver.owner);
 bailout_mutex_unlock:
 	port->port.count = 0;
 	tty->driver_data = NULL;
 	tty_port_tty_set(&port->port, NULL);
 	mutex_unlock(&port->mutex);
-bailout_kref_put:
+bailout_port_put:
+	put_device(&port->dev);
+bailout_serial_put:
 	usb_serial_put(serial);
 	return retval;
 }
@@ -262,6 +262,9 @@
 static void serial_close(struct tty_struct *tty, struct file *filp)
 {
 	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial;
+	struct module *owner;
+	int count;
 
 	if (!port)
 		return;
@@ -269,6 +272,8 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	mutex_lock(&port->mutex);
+	serial = port->serial;
+	owner = serial->type->driver.owner;
 
 	if (port->port.count == 0) {
 		mutex_unlock(&port->mutex);
@@ -281,7 +286,7 @@
 		 * this before we drop the port count. The call is protected
 		 * by the port mutex
 		 */
-		port->serial->type->close(tty, port, filp);
+		serial->type->close(tty, port, filp);
 
 	if (port->port.count == (port->console ? 2 : 1)) {
 		struct tty_struct *tty = tty_port_tty_get(&port->port);
@@ -295,17 +300,23 @@
 		}
 	}
 
-	if (port->port.count == 1) {
-		mutex_lock(&port->serial->disc_mutex);
-		if (!port->serial->disconnected)
-			usb_autopm_put_interface(port->serial->interface);
-		mutex_unlock(&port->serial->disc_mutex);
-		module_put(port->serial->type->driver.owner);
-	}
 	--port->port.count;
-
+	count = port->port.count;
 	mutex_unlock(&port->mutex);
-	usb_serial_put(port->serial);
+	put_device(&port->dev);
+
+	/* Mustn't dereference port any more */
+	if (count == 0) {
+		mutex_lock(&serial->disc_mutex);
+		if (!serial->disconnected)
+			usb_autopm_put_interface(serial->interface);
+		mutex_unlock(&serial->disc_mutex);
+	}
+	usb_serial_put(serial);
+
+	/* Mustn't dereference serial any more */
+	if (count == 0)
+		module_put(owner);
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -549,7 +560,13 @@
 
 static void port_free(struct usb_serial_port *port)
 {
+	/*
+	 * Stop all the traffic before cancelling the work, so that
+	 * nobody will restart it by calling usb_serial_port_softint.
+	 */
 	kill_traffic(port);
+	cancel_work_sync(&port->work);
+
 	usb_free_urb(port->read_urb);
 	usb_free_urb(port->write_urb);
 	usb_free_urb(port->interrupt_in_urb);
@@ -558,7 +575,6 @@
 	kfree(port->bulk_out_buffer);
 	kfree(port->interrupt_in_buffer);
 	kfree(port->interrupt_out_buffer);
-	flush_scheduled_work();		/* port->work */
 	kfree(port);
 }
 
@@ -1043,6 +1059,12 @@
 	usb_set_intfdata(interface, NULL);
 	/* must set a flag, to signal subdrivers */
 	serial->disconnected = 1;
+	mutex_unlock(&serial->disc_mutex);
+
+	/* Unfortunately, many of the sub-drivers expect the port structures
+	 * to exist when their shutdown method is called, so we have to go
+	 * through this awkward two-step unregistration procedure.
+	 */
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port) {
@@ -1052,11 +1074,21 @@
 				tty_kref_put(tty);
 			}
 			kill_traffic(port);
+			cancel_work_sync(&port->work);
+			device_del(&port->dev);
 		}
 	}
+	serial->type->shutdown(serial);
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		if (port) {
+			put_device(&port->dev);
+			serial->port[i] = NULL;
+		}
+	}
+
 	/* let the last holder of this object
 	 * cause it to be cleaned up */
-	mutex_unlock(&serial->disc_mutex);
 	usb_serial_put(serial);
 	dev_info(dev, "device disconnected\n");
 }
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 4facce3..5ac414b 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -296,14 +296,6 @@
 	priv->throttled = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/*
-	 * Force low_latency on so that our tty_push actually forces the data
-	 * through, otherwise it is scheduled, and with high data rates (like
-	 * with OHCI) data can get lost.
-	 */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev,
 			   usb_rcvbulkpipe(serial->dev,
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 5be54c0..ef7e5a8 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -17,7 +17,8 @@
 ifeq ($(CONFIG_USB_LIBUSUAL),)
 	usb-storage-objs	+= usual-tables.o
 else
-	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
+	obj-$(CONFIG_USB)	+= usb-libusual.o
+	usb-libusual-objs	:= libusual.o usual-tables.o
 endif
 
 obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 49aedb3..fcb3202 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -247,10 +247,8 @@
 		USB_ENDPOINT_HALT, endp,
 		NULL, 0, 3*HZ);
 
-	/* reset the endpoint toggle */
 	if (result >= 0)
-		usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
-				usb_pipeout(pipe), 0);
+		usb_reset_endpoint(us->pusb_dev, endp);
 
 	US_DEBUGP("%s: result = %d\n", __func__, result);
 	return result;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1c1f643..fa65a3b 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -975,12 +975,14 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
 
-/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
 UNUSUAL_DEV(  0x07c4, 0xa4a5, 0x0000, 0xffff,
 		"Simple Tech/Datafab",
 		"CF+SM Reader",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_RESIDUE ),
+		US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
 
 /* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
  * to the USB storage specification in two ways:
@@ -1376,6 +1378,14 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		0),
 
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV(  0x1186, 0x3e04, 0x0000, 0x0000,
+           "D-Link",
+           "USB Mass Storage",
+           US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+
 /* Reported by Kevin Lloyd <linux@sierrawireless.com>
  * Entry is needed for the initializer function override,
  * which instructs the device to load as a modem
@@ -1841,6 +1851,12 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_CAPACITY_HEURISTICS),
 
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+		"TGE",
+		"Digital MP3 Audio Player",
+		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
 /* Control/Bulk transport for all SubClass values */
 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 386eaa2..4ac4300 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -267,6 +267,8 @@
 	mutex_lock(&wusbhc->mutex);
 	wusbhc_devconnect_acked(wusbhc, wusb_dev);
 	mutex_unlock(&wusbhc->mutex);
+
+	wusb_dev_put(wusb_dev);
 }
 
 /*
@@ -396,7 +398,8 @@
 
 	/* After a device disconnects, change the GTK (see [WUSB]
 	 * section 6.2.11.2). */
-	wusbhc_gtk_rekey(wusbhc);
+	if (wusbhc->active)
+		wusbhc_gtk_rekey(wusbhc);
 
 	/* The Wireless USB part has forgotten about the device already; now
 	 * khubd's timer will pick up the disconnection and remove the USB
@@ -1084,15 +1087,21 @@
  * wusbhc_devconnect_stop - stop managing connected devices
  * @wusbhc: the WUSB HC
  *
- * Removes the Host Info IE and stops the keep alives.
- *
- * FIXME: should this disconnect all devices?
+ * Disconnects any devices still connected, stops the keep alives and
+ * removes the Host Info IE.
  */
 void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
 {
-	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
-	WARN_ON(!list_empty(&wusbhc->cack_list));
+	int i;
 
+	mutex_lock(&wusbhc->mutex);
+	for (i = 0; i < wusbhc->ports_max; i++) {
+		if (wusbhc->port[i].wusb_dev)
+			__wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
+	}
+	mutex_unlock(&wusbhc->mutex);
+
+	cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
 	wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
 	kfree(wusbhc->wuie_host_info);
 	wusbhc->wuie_host_info = NULL;
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 07c63a3..ee6256f 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -88,33 +88,31 @@
 					     wusb_trust_timeout_store);
 
 /*
- * Show & store the current WUSB CHID
+ * Show the current WUSB CHID.
  */
 static ssize_t wusb_chid_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
 	struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+	const struct wusb_ckhdid *chid;
 	ssize_t result = 0;
 
 	if (wusbhc->wuie_host_info != NULL)
-		result += ckhdid_printf(buf, PAGE_SIZE,
-					&wusbhc->wuie_host_info->CHID);
+		chid = &wusbhc->wuie_host_info->CHID;
+	else
+		chid = &wusb_ckhdid_zero;
+
+	result += ckhdid_printf(buf, PAGE_SIZE, chid);
+	result += sprintf(buf + result, "\n");
+
 	return result;
 }
 
 /*
- * Store a new CHID
+ * Store a new CHID.
  *
- * This will (FIXME) trigger many changes.
- *
- * - Send an all zeros CHID and it will stop the controller
- * - Send a non-zero CHID and it will start it
- *   (unless it was started, it will just change the CHID,
- *   diconnecting all devices first).
- *
- * So first we scan the MMC we are sent and then we act on it.  We
- * read it in the same format as we print it, an ASCII string of 16
- * hex bytes.
+ * - Write an all zeros CHID and it will stop the controller
+ * - Write a non-zero CHID and it will start it.
  *
  * See wusbhc_chid_set() for more info.
  */
@@ -339,13 +337,15 @@
 {
 	struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
 
-	if (status == 0) {
+	if (status == 0 && wusb_dev) {
 		wusb_dev->entry_ts = jiffies;
 
-		/* wusbhc_devconnect_acked() can't be called from from
+		/* wusbhc_devconnect_acked() can't be called from
 		   atomic context so defer it to a work queue. */
 		if (!list_empty(&wusb_dev->cack_node))
 			queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+		else
+			wusb_dev_put(wusb_dev);
 	}
 
 	usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c
index 1a1f946..9fe90ce 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/asiliantfb.c
@@ -533,6 +533,7 @@
 
 	writeb(0xff, mmio_base + 0x78c);
 	chips_hw_init(p);
+	return 0;
 }
 
 static int __devinit
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 84f63205..0889d50 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1439,7 +1439,7 @@
 static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
 {
 	struct pxafb_info *fbi = dev_id;
-	unsigned int lccr0, lcsr, lcsr1;
+	unsigned int lccr0, lcsr;
 
 	lcsr = lcd_readl(fbi, LCSR);
 	if (lcsr & LCSR_LDD) {
@@ -1455,14 +1455,16 @@
 	lcd_writel(fbi, LCSR, lcsr);
 
 #ifdef CONFIG_FB_PXA_OVERLAY
-	lcsr1 = lcd_readl(fbi, LCSR1);
-	if (lcsr1 & LCSR1_BS(1))
-		complete(&fbi->overlay[0].branch_done);
+	{
+		unsigned int lcsr1 = lcd_readl(fbi, LCSR1);
+		if (lcsr1 & LCSR1_BS(1))
+			complete(&fbi->overlay[0].branch_done);
 
-	if (lcsr1 & LCSR1_BS(2))
-		complete(&fbi->overlay[1].branch_done);
+		if (lcsr1 & LCSR1_BS(2))
+			complete(&fbi->overlay[1].branch_done);
 
-	lcd_writel(fbi, LCSR1, lcsr1);
+		lcd_writel(fbi, LCSR1, lcsr1);
+	}
 #endif
 	return IRQ_HANDLED;
 }
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 5926826..9c76a06 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -190,7 +190,8 @@
 		try_to_freeze();
 		wait_event_interruptible(vb->config_change,
 					 (diff = towards_target(vb)) != 0
-					 || kthread_should_stop());
+					 || kthread_should_stop()
+					 || freezing(current));
 		if (diff > 0)
 			fill_balloon(vb, diff);
 		else if (diff < 0)
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c
index 7529616..2cde568 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion5x_wdt.c
@@ -22,6 +22,7 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <mach/bridge-regs.h>
 #include <plat/orion5x_wdt.h>
 
 /*
diff --git a/firmware/Makefile b/firmware/Makefile
index 142c17a..25200d1 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -46,6 +46,7 @@
 fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
 			     e100/d102e_ucode.bin
 fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
+fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
 fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
 fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 				      advansys/3550.bin advansys/38C0800.bin
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 10f61c9..4c52984 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -576,6 +576,16 @@
 
 --------------------------------------------------------------------------
 
+Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter
+
+File: cis/LA-PCM.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
 Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA
 
 File: ositech/Xilinx7OD.bin
diff --git a/firmware/cis/LA-PCM.cis.ihex b/firmware/cis/LA-PCM.cis.ihex
new file mode 100644
index 0000000..a0ff0c7
--- /dev/null
+++ b/firmware/cis/LA-PCM.cis.ihex
@@ -0,0 +1,20 @@
+:100000000105D4F953E9FF17035338FF20040FC04B
+:1000100002002102060315390401416C6C69656414
+:100020002054656C657369732C4B2E4B00457468C6
+:1000300065726E6574204C414E20436172640043CA
+:10004000656E747265434F4D004C412D50434D0019
+:10005000FF1A0602100000020B1B08810108E06075
+:1000600000021F1B08820108E06020021F1B08839A
+:100070000108E06040021F1B08840108E060600284
+:100080001F1B08850108E06080021F1B088601080D
+:10009000E060A0021F1B08870108E060C0021F1B70
+:1000A00008880108E060E0021F1B08890108E06081
+:1000B00000031F1B088A0108E06020031F1B088B38
+:1000C0000108E06040031F1B088C0108E06060032A
+:1000D0001F1B088D0108E06080031F1B088E0108AC
+:1000E000E060A0031F1B088F0108E060C0031F1B16
+:0D00F00008900108E060E0031F1400FF000D
+:00000001FF
+#
+# Replacement CIS for Allied Telesis LA-PCM
+#
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 7a1d942..0149dab 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -102,6 +102,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_AFS_FSCACHE
 /*
  * deal with notification that a page was read from the cache
  */
@@ -117,6 +118,7 @@
 		SetPageUptodate(page);
 	unlock_page(page);
 }
+#endif
 
 /*
  * AFS read page from file, directory or symlink
diff --git a/fs/autofs/dirhash.c b/fs/autofs/dirhash.c
index bf8c8af..4eb4d8d 100644
--- a/fs/autofs/dirhash.c
+++ b/fs/autofs/dirhash.c
@@ -39,10 +39,12 @@
 {
 	struct autofs_dirhash *dh = &sbi->dirhash;
 	struct autofs_dir_ent *ent;
-	struct dentry *dentry;
 	unsigned long timeout = sbi->exp_timeout;
 
 	while (1) {
+		struct path path;
+		int umount_ok;
+
 		if ( list_empty(&dh->expiry_head) || sbi->catatonic )
 			return NULL;	/* No entries */
 		/* We keep the list sorted by last_usage and want old stuff */
@@ -57,17 +59,17 @@
 			return ent; /* Symlinks are always expirable */
 
 		/* Get the dentry for the autofs subdirectory */
-		dentry = ent->dentry;
+		path.dentry = ent->dentry;
 
-		if ( !dentry ) {
+		if (!path.dentry) {
 			/* Should only happen in catatonic mode */
 			printk("autofs: dentry == NULL but inode range is directory, entry %s\n", ent->name);
 			autofs_delete_usage(ent);
 			continue;
 		}
 
-		if ( !dentry->d_inode ) {
-			dput(dentry);
+		if (!path.dentry->d_inode) {
+			dput(path.dentry);
 			printk("autofs: negative dentry on expiry queue: %s\n",
 			       ent->name);
 			autofs_delete_usage(ent);
@@ -76,29 +78,29 @@
 
 		/* Make sure entry is mounted and unused; note that dentry will
 		   point to the mounted-on-top root. */
-		if (!S_ISDIR(dentry->d_inode->i_mode)||!d_mountpoint(dentry)) {
+		if (!S_ISDIR(path.dentry->d_inode->i_mode) ||
+		    !d_mountpoint(path.dentry)) {
 			DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
 			continue;
 		}
-		mntget(mnt);
-		dget(dentry);
-		if (!follow_down(&mnt, &dentry)) {
-			dput(dentry);
-			mntput(mnt);
+		path.mnt = mnt;
+		path_get(&path);
+		if (!follow_down(&path.mnt, &path.dentry)) {
+			path_put(&path);
 			DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
 			continue;
 		}
-		while (d_mountpoint(dentry) && follow_down(&mnt, &dentry))
+		while (d_mountpoint(path.dentry) &&
+		       follow_down(&path.mnt, &path.dentry))
 			;
-		dput(dentry);
+		umount_ok = may_umount(path.mnt);
+		path_put(&path);
 
-		if ( may_umount(mnt) ) {
-			mntput(mnt);
+		if (umount_ok) {
 			DPRINTK(("autofs: signaling expire on %s\n", ent->name));
 			return ent; /* Expirable! */
 		}
 		DPRINTK(("autofs: didn't expire due to may_umount: %s\n", ent->name));
-		mntput(mnt);
 	}
 	return NULL;		/* No expirable entries */
 }
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index 9e5ae8a..84168c0 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -54,11 +54,10 @@
  * Check a string doesn't overrun the chunk of
  * memory we copied from user land.
  */
-static int invalid_str(char *str, void *end)
+static int invalid_str(char *str, size_t size)
 {
-	while ((void *) str <= end)
-		if (!*str++)
-			return 0;
+	if (memchr(str, 0, size))
+		return 0;
 	return -EINVAL;
 }
 
@@ -138,8 +137,7 @@
 	}
 
 	if (param->size > sizeof(*param)) {
-		err = invalid_str(param->path,
-				 (void *) ((size_t) param + param->size));
+		err = invalid_str(param->path, param->size - sizeof(*param));
 		if (err) {
 			AUTOFS_WARN(
 			  "path string terminator missing for cmd(0x%08x)",
@@ -488,7 +486,7 @@
 	}
 
 	path = param->path;
-	devid = sbi->sb->s_dev;
+	devid = new_encode_dev(sbi->sb->s_dev);
 
 	param->requester.uid = param->requester.gid = -1;
 
diff --git a/fs/bio.c b/fs/bio.c
index e0c9e54..7bbc98f 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -175,14 +175,6 @@
 	struct bio_vec *bvl;
 
 	/*
-	 * If 'bs' is given, lookup the pool and do the mempool alloc.
-	 * If not, this is a bio_kmalloc() allocation and just do a
-	 * kzalloc() for the exact number of vecs right away.
-	 */
-	if (!bs)
-		bvl = kmalloc(nr * sizeof(struct bio_vec), gfp_mask);
-
-	/*
 	 * see comment near bvec_array define!
 	 */
 	switch (nr) {
@@ -260,21 +252,6 @@
 	mempool_free(p, bs->bio_pool);
 }
 
-/*
- * default destructor for a bio allocated with bio_alloc_bioset()
- */
-static void bio_fs_destructor(struct bio *bio)
-{
-	bio_free(bio, fs_bio_set);
-}
-
-static void bio_kmalloc_destructor(struct bio *bio)
-{
-	if (bio_has_allocated_vec(bio))
-		kfree(bio->bi_io_vec);
-	kfree(bio);
-}
-
 void bio_init(struct bio *bio)
 {
 	memset(bio, 0, sizeof(*bio));
@@ -301,21 +278,15 @@
  **/
 struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
 {
+	unsigned long idx = BIO_POOL_NONE;
 	struct bio_vec *bvl = NULL;
-	struct bio *bio = NULL;
-	unsigned long idx = 0;
-	void *p = NULL;
+	struct bio *bio;
+	void *p;
 
-	if (bs) {
-		p = mempool_alloc(bs->bio_pool, gfp_mask);
-		if (!p)
-			goto err;
-		bio = p + bs->front_pad;
-	} else {
-		bio = kmalloc(sizeof(*bio), gfp_mask);
-		if (!bio)
-			goto err;
-	}
+	p = mempool_alloc(bs->bio_pool, gfp_mask);
+	if (unlikely(!p))
+		return NULL;
+	bio = p + bs->front_pad;
 
 	bio_init(bio);
 
@@ -332,22 +303,33 @@
 
 		nr_iovecs = bvec_nr_vecs(idx);
 	}
+out_set:
 	bio->bi_flags |= idx << BIO_POOL_OFFSET;
 	bio->bi_max_vecs = nr_iovecs;
-out_set:
 	bio->bi_io_vec = bvl;
-
 	return bio;
 
 err_free:
-	if (bs)
-		mempool_free(p, bs->bio_pool);
-	else
-		kfree(bio);
-err:
+	mempool_free(p, bs->bio_pool);
 	return NULL;
 }
 
+static void bio_fs_destructor(struct bio *bio)
+{
+	bio_free(bio, fs_bio_set);
+}
+
+/**
+ *	bio_alloc - allocate a new bio, memory pool backed
+ *	@gfp_mask: allocation mask to use
+ *	@nr_iovecs: number of iovecs
+ *
+ *	Allocate a new bio with @nr_iovecs bvecs.  If @gfp_mask
+ *	contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ *
+ *	RETURNS:
+ *	Pointer to new bio on success, NULL on failure.
+ */
 struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
 {
 	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
@@ -358,19 +340,45 @@
 	return bio;
 }
 
-/*
- * Like bio_alloc(), but doesn't use a mempool backing. This means that
- * it CAN fail, but while bio_alloc() can only be used for allocations
- * that have a short (finite) life span, bio_kmalloc() should be used
- * for more permanent bio allocations (like allocating some bio's for
- * initalization or setup purposes).
- */
+static void bio_kmalloc_destructor(struct bio *bio)
+{
+	if (bio_integrity(bio))
+		bio_integrity_free(bio);
+	kfree(bio);
+}
+
+/**
+ * bio_alloc - allocate a bio for I/O
+ * @gfp_mask:   the GFP_ mask given to the slab allocator
+ * @nr_iovecs:	number of iovecs to pre-allocate
+ *
+ * Description:
+ *   bio_alloc will allocate a bio and associated bio_vec array that can hold
+ *   at least @nr_iovecs entries. Allocations will be done from the
+ *   fs_bio_set. Also see @bio_alloc_bioset.
+ *
+ *   If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ *   a bio. This is due to the mempool guarantees. To make this work, callers
+ *   must never allocate more than 1 bio at the time from this pool. Callers
+ *   that need to allocate more than 1 bio must always submit the previously
+ *   allocate bio for IO before attempting to allocate a new one. Failure to
+ *   do so can cause livelocks under memory pressure.
+ *
+ **/
 struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
 {
-	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, NULL);
+	struct bio *bio;
 
-	if (bio)
-		bio->bi_destructor = bio_kmalloc_destructor;
+	bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
+		      gfp_mask);
+	if (unlikely(!bio))
+		return NULL;
+
+	bio_init(bio);
+	bio->bi_flags |= BIO_POOL_NONE << BIO_POOL_OFFSET;
+	bio->bi_max_vecs = nr_iovecs;
+	bio->bi_io_vec = bio->bi_inline_vecs;
+	bio->bi_destructor = bio_kmalloc_destructor;
 
 	return bio;
 }
@@ -814,7 +822,7 @@
 		return ERR_PTR(-ENOMEM);
 
 	ret = -ENOMEM;
-	bio = bio_alloc(gfp_mask, nr_pages);
+	bio = bio_kmalloc(gfp_mask, nr_pages);
 	if (!bio)
 		goto out_bmd;
 
@@ -938,7 +946,7 @@
 	if (!nr_pages)
 		return ERR_PTR(-EINVAL);
 
-	bio = bio_alloc(gfp_mask, nr_pages);
+	bio = bio_kmalloc(gfp_mask, nr_pages);
 	if (!bio)
 		return ERR_PTR(-ENOMEM);
 
@@ -1122,7 +1130,7 @@
 	int offset, i;
 	struct bio *bio;
 
-	bio = bio_alloc(gfp_mask, nr_pages);
+	bio = bio_kmalloc(gfp_mask, nr_pages);
 	if (!bio)
 		return ERR_PTR(-ENOMEM);
 
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 48762aa..5e94ea6 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -461,15 +461,9 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	namelen = strlen(vol_args->name);
@@ -547,7 +541,6 @@
 
 out_unlock:
 	mutex_unlock(&root->fs_info->volume_mutex);
-out:
 	kfree(vol_args);
 	return ret;
 }
@@ -567,15 +560,9 @@
 	if (root->fs_info->sb->s_flags & MS_RDONLY)
 		return -EROFS;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	namelen = strlen(vol_args->name);
@@ -677,19 +664,13 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	ret = btrfs_init_new_device(root, vol_args->name);
 
-out:
 	kfree(vol_args);
 	return ret;
 }
@@ -705,19 +686,13 @@
 	if (root->fs_info->sb->s_flags & MS_RDONLY)
 		return -EROFS;
 
-	vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
+	vol_args = memdup_user(arg, sizeof(*vol_args));
+	if (IS_ERR(vol_args))
+		return PTR_ERR(vol_args);
 
-	if (!vol_args)
-		return -ENOMEM;
-
-	if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
-		ret = -EFAULT;
-		goto out;
-	}
 	vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
 	ret = btrfs_rm_device(root, vol_args->name);
 
-out:
 	kfree(vol_args);
 	return ret;
 }
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index bf0e84c..3536bdb 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -648,14 +648,9 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	vol = kmalloc(sizeof(*vol), GFP_KERNEL);
-	if (!vol)
-		return -ENOMEM;
-
-	if (copy_from_user(vol, (void __user *)arg, sizeof(*vol))) {
-		ret = -EFAULT;
-		goto out;
-	}
+	vol = memdup_user((void __user *)arg, sizeof(*vol));
+	if (IS_ERR(vol))
+		return PTR_ERR(vol);
 
 	switch (cmd) {
 	case BTRFS_IOC_SCAN_DEV:
@@ -663,7 +658,7 @@
 					    &btrfs_fs_type, &fs_devices);
 		break;
 	}
-out:
+
 	kfree(vol);
 	return ret;
 }
diff --git a/fs/buffer.c b/fs/buffer.c
index 13edf7a..b3e5be7 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -360,7 +360,7 @@
  * Completion handler for block_write_full_page() - pages which are unlocked
  * during I/O, and which have PageWriteback cleared upon I/O completion.
  */
-static void end_buffer_async_write(struct buffer_head *bh, int uptodate)
+void end_buffer_async_write(struct buffer_head *bh, int uptodate)
 {
 	char b[BDEVNAME_SIZE];
 	unsigned long flags;
@@ -438,10 +438,16 @@
 	set_buffer_async_read(bh);
 }
 
+void mark_buffer_async_write_endio(struct buffer_head *bh,
+				   bh_end_io_t *handler)
+{
+	bh->b_end_io = handler;
+	set_buffer_async_write(bh);
+}
+
 void mark_buffer_async_write(struct buffer_head *bh)
 {
-	bh->b_end_io = end_buffer_async_write;
-	set_buffer_async_write(bh);
+	mark_buffer_async_write_endio(bh, end_buffer_async_write);
 }
 EXPORT_SYMBOL(mark_buffer_async_write);
 
@@ -547,7 +553,7 @@
 	return err;
 }
 
-void do_thaw_all(unsigned long unused)
+void do_thaw_all(struct work_struct *work)
 {
 	struct super_block *sb;
 	char b[BDEVNAME_SIZE];
@@ -567,6 +573,7 @@
 			goto restart;
 	}
 	spin_unlock(&sb_lock);
+	kfree(work);
 	printk(KERN_WARNING "Emergency Thaw complete\n");
 }
 
@@ -577,7 +584,13 @@
  */
 void emergency_thaw_all(void)
 {
-	pdflush_operation(do_thaw_all, 0);
+	struct work_struct *work;
+
+	work = kmalloc(sizeof(*work), GFP_ATOMIC);
+	if (work) {
+		INIT_WORK(work, do_thaw_all);
+		schedule_work(work);
+	}
 }
 
 /**
@@ -1608,7 +1621,8 @@
  * unplugging the device queue.
  */
 static int __block_write_full_page(struct inode *inode, struct page *page,
-			get_block_t *get_block, struct writeback_control *wbc)
+			get_block_t *get_block, struct writeback_control *wbc,
+			bh_end_io_t *handler)
 {
 	int err;
 	sector_t block;
@@ -1693,7 +1707,7 @@
 			continue;
 		}
 		if (test_clear_buffer_dirty(bh)) {
-			mark_buffer_async_write(bh);
+			mark_buffer_async_write_endio(bh, handler);
 		} else {
 			unlock_buffer(bh);
 		}
@@ -1746,7 +1760,7 @@
 		if (buffer_mapped(bh) && buffer_dirty(bh) &&
 		    !buffer_delay(bh)) {
 			lock_buffer(bh);
-			mark_buffer_async_write(bh);
+			mark_buffer_async_write_endio(bh, handler);
 		} else {
 			/*
 			 * The buffer may have been set dirty during
@@ -2672,7 +2686,8 @@
 out:
 	ret = mpage_writepage(page, get_block, wbc);
 	if (ret == -EAGAIN)
-		ret = __block_write_full_page(inode, page, get_block, wbc);
+		ret = __block_write_full_page(inode, page, get_block, wbc,
+					      end_buffer_async_write);
 	return ret;
 }
 EXPORT_SYMBOL(nobh_writepage);
@@ -2830,9 +2845,10 @@
 
 /*
  * The generic ->writepage function for buffer-backed address_spaces
+ * this form passes in the end_io handler used to finish the IO.
  */
-int block_write_full_page(struct page *page, get_block_t *get_block,
-			struct writeback_control *wbc)
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+			struct writeback_control *wbc, bh_end_io_t *handler)
 {
 	struct inode * const inode = page->mapping->host;
 	loff_t i_size = i_size_read(inode);
@@ -2841,7 +2857,8 @@
 
 	/* Is the page fully inside i_size? */
 	if (page->index < end_index)
-		return __block_write_full_page(inode, page, get_block, wbc);
+		return __block_write_full_page(inode, page, get_block, wbc,
+					       handler);
 
 	/* Is the page fully outside i_size? (truncate in progress) */
 	offset = i_size & (PAGE_CACHE_SIZE-1);
@@ -2864,9 +2881,20 @@
 	 * writes to that region are not written out to the file."
 	 */
 	zero_user_segment(page, offset, PAGE_CACHE_SIZE);
-	return __block_write_full_page(inode, page, get_block, wbc);
+	return __block_write_full_page(inode, page, get_block, wbc, handler);
 }
 
+/*
+ * The generic ->writepage function for buffer-backed address_spaces
+ */
+int block_write_full_page(struct page *page, get_block_t *get_block,
+			struct writeback_control *wbc)
+{
+	return block_write_full_page_endio(page, get_block, wbc,
+					   end_buffer_async_write);
+}
+
+
 sector_t generic_block_bmap(struct address_space *mapping, sector_t block,
 			    get_block_t *get_block)
 {
@@ -3335,9 +3363,11 @@
 EXPORT_SYMBOL(block_sync_page);
 EXPORT_SYMBOL(block_truncate_page);
 EXPORT_SYMBOL(block_write_full_page);
+EXPORT_SYMBOL(block_write_full_page_endio);
 EXPORT_SYMBOL(cont_write_begin);
 EXPORT_SYMBOL(end_buffer_read_sync);
 EXPORT_SYMBOL(end_buffer_write_sync);
+EXPORT_SYMBOL(end_buffer_async_write);
 EXPORT_SYMBOL(file_fsync);
 EXPORT_SYMBOL(generic_block_bmap);
 EXPORT_SYMBOL(generic_cont_expand_simple);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 6598400..9d1fb6e 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -15,7 +15,8 @@
 fails to support it properly, as with Samba server versions prior to 3.3.2)
 Fix "redzone overwritten" bug in cifs_put_tcon (CIFSTcon may allocate too
 little memory for the "nativeFileSystem" field returned by the server
-during mount). 
+during mount).  Endian convert inode numbers if necessary (makes it easier
+to compare inode numbers on network files from big endian systems). 
 
 Version 1.56
 ------------
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 3fd3a9d..67bf93a 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -41,7 +41,7 @@
 
 	/* attach the data */
 	memcpy(payload, data, datalen);
-	rcu_assign_pointer(key->payload.data, payload);
+	key->payload.data = payload;
 	ret = 0;
 
 error:
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 38491fd..0d6d8b5 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -66,9 +66,6 @@
 extern struct task_struct *oplockThread; /* remove sparse warning */
 struct task_struct *oplockThread = NULL;
 /* extern struct task_struct * dnotifyThread; remove sparse warning */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static struct task_struct *dnotifyThread = NULL;
-#endif
 static const struct super_operations cifs_super_ops;
 unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
 module_param(CIFSMaxBufSize, int, 0);
@@ -316,6 +313,7 @@
 	cifs_inode->clientCanCacheAll = false;
 	cifs_inode->delete_pending = false;
 	cifs_inode->vfs_inode.i_blkbits = 14;  /* 2**14 = CIFS_MAX_MSGSIZE */
+	cifs_inode->server_eof = 0;
 
 	/* Can not set i_flags here - they get immediately overwritten
 	   to zero by the VFS */
@@ -1040,34 +1038,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static int cifs_dnotify_thread(void *dummyarg)
-{
-	struct list_head *tmp;
-	struct TCP_Server_Info *server;
-
-	do {
-		if (try_to_freeze())
-			continue;
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(15*HZ);
-		/* check if any stuck requests that need
-		   to be woken up and wakeq so the
-		   thread can wake up and error out */
-		read_lock(&cifs_tcp_ses_lock);
-		list_for_each(tmp, &cifs_tcp_ses_list) {
-			server = list_entry(tmp, struct TCP_Server_Info,
-					 tcp_ses_list);
-			if (atomic_read(&server->inFlight))
-				wake_up_all(&server->response_q);
-		}
-		read_unlock(&cifs_tcp_ses_lock);
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-#endif
-
 static int __init
 init_cifs(void)
 {
@@ -1144,21 +1114,8 @@
 		goto out_unregister_dfs_key_type;
 	}
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-	dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd");
-	if (IS_ERR(dnotifyThread)) {
-		rc = PTR_ERR(dnotifyThread);
-		cERROR(1, ("error %d create dnotify thread", rc));
-		goto out_stop_oplock_thread;
-	}
-#endif
-
 	return 0;
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- out_stop_oplock_thread:
-#endif
-	kthread_stop(oplockThread);
  out_unregister_dfs_key_type:
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	unregister_key_type(&key_type_dns_resolver);
@@ -1196,9 +1153,6 @@
 	cifs_destroy_inodecache();
 	cifs_destroy_mids();
 	cifs_destroy_request_bufs();
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-	kthread_stop(dnotifyThread);
-#endif
 	kthread_stop(oplockThread);
 }
 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 9fbf4df..df40ab6 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -350,7 +350,7 @@
 	bool invalidHandle:1;	/* file closed via session abend */
 	bool messageMode:1;	/* for pipes: message vs byte mode */
 	atomic_t wrtPending;   /* handle in use - defer close */
-	struct semaphore fh_sem; /* prevents reopen race after dead ses*/
+	struct mutex fh_mutex; /* prevents reopen race after dead ses*/
 	struct cifs_search_info srch_inf;
 };
 
@@ -370,6 +370,7 @@
 	bool clientCanCacheAll:1;	/* read and writebehind oplock */
 	bool oplockPending:1;
 	bool delete_pending:1;		/* DELETE_ON_CLOSE is set */
+	u64  server_eof;		/* current file size on server */
 	struct inode vfs_inode;
 };
 
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index b370489..a785f69 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -2163,7 +2163,7 @@
 	__le32 Type;
 	__le64 DevMajor;
 	__le64 DevMinor;
-	__u64 UniqueId;
+	__le64 UniqueId;
 	__le64 Permissions;
 	__le64 Nlinks;
 } __attribute__((packed)) FILE_UNIX_BASIC_INFO;	/* level 0x200 QPathInfo */
@@ -2308,7 +2308,7 @@
 } __attribute__((packed));
 
 struct file_internal_info {
-	__u64  UniqueId; /* inode number */
+	__le64  UniqueId; /* inode number */
 } __attribute__((packed));      /* level 0x3ee */
 
 struct file_mode_info {
@@ -2338,7 +2338,7 @@
 	__le32 Type;
 	__le64 DevMajor;
 	__le64 DevMinor;
-	__u64 UniqueId;
+	__le64 UniqueId;
 	__le64 Permissions;
 	__le64 Nlinks;
 	char FileName[1];
@@ -2386,7 +2386,7 @@
 	__le32 FileNameLength;
 	__le32 EaSize; /* EA size */
 	__le32 Reserved;
-	__u64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
+	__le64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
 	char FileName[1];
 } __attribute__((packed)) SEARCH_ID_FULL_DIR_INFO; /* level 0x105 FF rsp data */
 
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index bc09c99..a0845dc 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1626,6 +1626,8 @@
 	int smb_hdr_len;
 	int resp_buf_type = 0;
 
+	*nbytes = 0;
+
 	cFYI(1, ("write2 at %lld %d bytes", (long long)offset, count));
 
 	if (tcon->ses->capabilities & CAP_LARGE_FILES) {
@@ -1682,11 +1684,9 @@
 	cifs_stats_inc(&tcon->num_writes);
 	if (rc) {
 		cFYI(1, ("Send error Write2 = %d", rc));
-		*nbytes = 0;
 	} else if (resp_buf_type == 0) {
 		/* presumably this can not happen, but best to be safe */
 		rc = -EIO;
-		*nbytes = 0;
 	} else {
 		WRITE_RSP *pSMBr = (WRITE_RSP *)iov[0].iov_base;
 		*nbytes = le16_to_cpu(pSMBr->CountHigh);
@@ -3918,7 +3918,7 @@
 			}
 			pfinfo = (struct file_internal_info *)
 				(data_offset + (char *) &pSMBr->hdr.Protocol);
-			*inode_number = pfinfo->UniqueId;
+			*inode_number = le64_to_cpu(pfinfo->UniqueId);
 		}
 	}
 GetInodeNumOut:
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 0de3b56..bacdef1 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2214,9 +2214,58 @@
 	return rc;
 }
 
+static void
+cleanup_volume_info(struct smb_vol **pvolume_info)
+{
+	struct smb_vol *volume_info;
+
+	if (!pvolume_info && !*pvolume_info)
+		return;
+
+	volume_info = *pvolume_info;
+	kzfree(volume_info->password);
+	kfree(volume_info->UNC);
+	kfree(volume_info->prepath);
+	kfree(volume_info);
+	*pvolume_info = NULL;
+	return;
+}
+
+#ifdef CONFIG_CIFS_DFS_UPCALL
+/* build_path_to_root returns full path to root when
+ * we do not have an exiting connection (tcon) */
+static char *
+build_unc_path_to_root(const struct smb_vol *volume_info,
+		const struct cifs_sb_info *cifs_sb)
+{
+	char *full_path;
+
+	int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1);
+	full_path = kmalloc(unc_len + cifs_sb->prepathlen + 1, GFP_KERNEL);
+	if (full_path == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	strncpy(full_path, volume_info->UNC, unc_len);
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+		int i;
+		for (i = 0; i < unc_len; i++) {
+			if (full_path[i] == '\\')
+				full_path[i] = '/';
+		}
+	}
+
+	if (cifs_sb->prepathlen)
+		strncpy(full_path + unc_len, cifs_sb->prepath,
+				cifs_sb->prepathlen);
+
+	full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
+	return full_path;
+}
+#endif
+
 int
 cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
-	   char *mount_data, const char *devname)
+		char *mount_data_global, const char *devname)
 {
 	int rc = 0;
 	int xid;
@@ -2225,6 +2274,13 @@
 	struct cifsTconInfo *tcon = NULL;
 	struct TCP_Server_Info *srvTcp = NULL;
 	char   *full_path;
+	char *mount_data = mount_data_global;
+#ifdef CONFIG_CIFS_DFS_UPCALL
+	struct dfs_info3_param *referrals = NULL;
+	unsigned int num_referrals = 0;
+try_mount_again:
+#endif
+	full_path = NULL;
 
 	xid = GetXid();
 
@@ -2371,11 +2427,9 @@
 				}
 			}
 
-			/* check for null share name ie connect to dfs root */
 			if ((strchr(volume_info->UNC + 3, '\\') == NULL)
 			    && (strchr(volume_info->UNC + 3, '/') == NULL)) {
-				/* rc = connect_to_dfs_path(...) */
-				cFYI(1, ("DFS root not supported"));
+				cERROR(1, ("Missing share name"));
 				rc = -ENODEV;
 				goto mount_fail_check;
 			} else {
@@ -2392,7 +2446,7 @@
 				}
 			}
 			if (rc)
-				goto mount_fail_check;
+				goto remote_path_check;
 			tcon->seal = volume_info->seal;
 			write_lock(&cifs_tcp_ses_lock);
 			list_add(&tcon->tcon_list, &pSesInfo->tcon_list);
@@ -2417,19 +2471,9 @@
 	/* BB FIXME fix time_gran to be larger for LANMAN sessions */
 	sb->s_time_gran = 100;
 
-mount_fail_check:
-	/* on error free sesinfo and tcon struct if needed */
-	if (rc) {
-		/* If find_unc succeeded then rc == 0 so we can not end */
-		/* up accidently freeing someone elses tcon struct */
-		if (tcon)
-			cifs_put_tcon(tcon);
-		else if (pSesInfo)
-			cifs_put_smb_ses(pSesInfo);
-		else
-			cifs_put_tcp_session(srvTcp);
-		goto out;
-	}
+	if (rc)
+		goto remote_path_check;
+
 	cifs_sb->tcon = tcon;
 
 	/* do not care if following two calls succeed - informational */
@@ -2461,7 +2505,9 @@
 		cifs_sb->rsize = min(cifs_sb->rsize,
 			       (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
 
-	if (!rc && cifs_sb->prepathlen) {
+remote_path_check:
+	/* check if a whole path (including prepath) is not remote */
+	if (!rc && cifs_sb->prepathlen && tcon) {
 		/* build_path_to_root works only when we have a valid tcon */
 		full_path = cifs_build_path_to_root(cifs_sb);
 		if (full_path == NULL) {
@@ -2469,31 +2515,79 @@
 			goto mount_fail_check;
 		}
 		rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
-		if (rc) {
-			cERROR(1, ("Path %s in not accessible: %d",
-						full_path, rc));
+		if (rc != -EREMOTE) {
 			kfree(full_path);
 			goto mount_fail_check;
 		}
 		kfree(full_path);
 	}
 
+	/* get referral if needed */
+	if (rc == -EREMOTE) {
+#ifdef CONFIG_CIFS_DFS_UPCALL
+		/* convert forward to back slashes in prepath here if needed */
+		if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
+			convert_delimiter(cifs_sb->prepath,
+					CIFS_DIR_SEP(cifs_sb));
+		full_path = build_unc_path_to_root(volume_info, cifs_sb);
+		if (IS_ERR(full_path)) {
+			rc = PTR_ERR(full_path);
+			goto mount_fail_check;
+		}
+
+		cFYI(1, ("Getting referral for: %s", full_path));
+		rc = get_dfs_path(xid, pSesInfo , full_path + 1,
+			cifs_sb->local_nls, &num_referrals, &referrals,
+			cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+		if (!rc && num_referrals > 0) {
+			char *fake_devname = NULL;
+
+			if (mount_data != mount_data_global)
+				kfree(mount_data);
+			mount_data = cifs_compose_mount_options(
+					cifs_sb->mountdata, full_path + 1,
+					referrals, &fake_devname);
+			kfree(fake_devname);
+			free_dfs_info_array(referrals, num_referrals);
+
+			if (tcon)
+				cifs_put_tcon(tcon);
+			else if (pSesInfo)
+				cifs_put_smb_ses(pSesInfo);
+
+			cleanup_volume_info(&volume_info);
+			FreeXid(xid);
+			kfree(full_path);
+			goto try_mount_again;
+		}
+#else /* No DFS support, return error on mount */
+		rc = -EOPNOTSUPP;
+#endif
+	}
+
+mount_fail_check:
+	/* on error free sesinfo and tcon struct if needed */
+	if (rc) {
+		if (mount_data != mount_data_global)
+			kfree(mount_data);
+		/* If find_unc succeeded then rc == 0 so we can not end */
+		/* up accidently freeing someone elses tcon struct */
+		if (tcon)
+			cifs_put_tcon(tcon);
+		else if (pSesInfo)
+			cifs_put_smb_ses(pSesInfo);
+		else
+			cifs_put_tcp_session(srvTcp);
+		goto out;
+	}
+
 	/* volume_info->password is freed above when existing session found
 	(in which case it is not needed anymore) but when new sesion is created
 	the password ptr is put in the new session structure (in which case the
 	password will be freed at unmount time) */
 out:
 	/* zero out password before freeing */
-	if (volume_info) {
-		if (volume_info->password != NULL) {
-			memset(volume_info->password, 0,
-				strlen(volume_info->password));
-			kfree(volume_info->password);
-		}
-		kfree(volume_info->UNC);
-		kfree(volume_info->prepath);
-		kfree(volume_info);
-	}
+	cleanup_volume_info(&volume_info);
 	FreeXid(xid);
 	return rc;
 }
@@ -2673,8 +2767,7 @@
 /* We look for obvious messed up bcc or strings in response so we do not go off
    the end since (at least) WIN2K and Windows XP have a major bug in not null
    terminating last Unicode string in response  */
-				if (ses->serverOS)
-					kfree(ses->serverOS);
+				kfree(ses->serverOS);
 				ses->serverOS = kzalloc(2 * (len + 1),
 							GFP_KERNEL);
 				if (ses->serverOS == NULL)
@@ -2710,8 +2803,7 @@
 						len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
 				/* last string is not always null terminated
 				   (for e.g. for Windows XP & 2000) */
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain =
 						    kzalloc(2*(len+1),
 							    GFP_KERNEL);
@@ -2725,8 +2817,7 @@
 						ses->serverDomain[1+(2*len)] = 0;
 					} else { /* else no more room so create
 						  dummy domain string */
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain =
 							kzalloc(2, GFP_KERNEL);
 					}
@@ -2772,8 +2863,7 @@
 					bcc_ptr++;
 
 					len = strnlen(bcc_ptr, 1024);
-					if (ses->serverDomain)
-						kfree(ses->serverDomain);
+					kfree(ses->serverDomain);
 					ses->serverDomain = kzalloc(len + 1,
 								    GFP_KERNEL);
 					if (ses->serverDomain == NULL)
@@ -3013,8 +3103,7 @@
 /* We look for obvious messed up bcc or strings in response so we do not go off
    the end since (at least) WIN2K and Windows XP have a major bug in not null
    terminating last Unicode string in response  */
-					if (ses->serverOS)
-						kfree(ses->serverOS);
+					kfree(ses->serverOS);
 					ses->serverOS =
 					    kzalloc(2 * (len + 1), GFP_KERNEL);
 					cifs_strfromUCS_le(ses->serverOS,
@@ -3086,8 +3175,7 @@
 					if (((long) bcc_ptr + len) - (long)
 					    pByteArea(smb_buffer_response)
 					    <= BCC(smb_buffer_response)) {
-						if (ses->serverOS)
-							kfree(ses->serverOS);
+						kfree(ses->serverOS);
 						ses->serverOS =
 						    kzalloc(len + 1,
 							    GFP_KERNEL);
@@ -3414,8 +3502,7 @@
 /* We look for obvious messed up bcc or strings in response so we do not go off
   the end since (at least) WIN2K and Windows XP have a major bug in not null
   terminating last Unicode string in response  */
-					if (ses->serverOS)
-						kfree(ses->serverOS);
+					kfree(ses->serverOS);
 					ses->serverOS =
 					    kzalloc(2 * (len + 1), GFP_KERNEL);
 					cifs_strfromUCS_le(ses->serverOS,
@@ -3448,8 +3535,7 @@
 						if (remaining_words > 0) {
 							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
      /* last string not always null terminated (e.g. for Windows XP & 2000) */
-							if (ses->serverDomain)
-								kfree(ses->serverDomain);
+							kfree(ses->serverDomain);
 							ses->serverDomain =
 							    kzalloc(2 *
 								    (len +
@@ -3476,13 +3562,11 @@
 							    = 0;
 						} /* else no more room so create dummy domain string */
 						else {
-							if (ses->serverDomain)
-								kfree(ses->serverDomain);
+							kfree(ses->serverDomain);
 							ses->serverDomain = kzalloc(2,GFP_KERNEL);
 						}
 					} else {  /* no room so create dummy domain and NOS string */
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain = kzalloc(2, GFP_KERNEL);
 						kfree(ses->serverNOS);
 						ses->serverNOS = kzalloc(2, GFP_KERNEL);
@@ -3492,8 +3576,7 @@
 					if (((long) bcc_ptr + len) -
 					   (long) pByteArea(smb_buffer_response)
 						<= BCC(smb_buffer_response)) {
-						if (ses->serverOS)
-							kfree(ses->serverOS);
+						kfree(ses->serverOS);
 						ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
 						strncpy(ses->serverOS,bcc_ptr, len);
 
@@ -3512,8 +3595,7 @@
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
-						if (ses->serverDomain)
-							kfree(ses->serverDomain);
+						kfree(ses->serverDomain);
 						ses->serverDomain =
 								kzalloc(len+1,
 								    GFP_KERNEL);
@@ -3674,16 +3756,15 @@
 			    BCC(smb_buffer_response)) {
 				kfree(tcon->nativeFileSystem);
 				tcon->nativeFileSystem =
-				    kzalloc(2*(length + 1), GFP_KERNEL);
-				if (tcon->nativeFileSystem)
+				    kzalloc((4 * length) + 2, GFP_KERNEL);
+				if (tcon->nativeFileSystem) {
 					cifs_strfromUCS_le(
 						tcon->nativeFileSystem,
 						(__le16 *) bcc_ptr,
 						length, nls_codepage);
-				bcc_ptr += 2 * length;
-				bcc_ptr[0] = 0;	/* null terminate the string */
-				bcc_ptr[1] = 0;
-				bcc_ptr += 2;
+					cFYI(1, ("nativeFileSystem=%s",
+						tcon->nativeFileSystem));
+				}
 			}
 			/* else do not bother copying these information fields*/
 		} else {
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 54dce78..461750e 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -129,12 +129,62 @@
 	return full_path;
 }
 
+static void
+cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
+			struct cifsTconInfo *tcon, bool write_only)
+{
+	int oplock = 0;
+	struct cifsFileInfo *pCifsFile;
+	struct cifsInodeInfo *pCifsInode;
+
+	pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+	if (pCifsFile == NULL)
+		return;
+
+	if (oplockEnabled)
+		oplock = REQ_OPLOCK;
+
+	pCifsFile->netfid = fileHandle;
+	pCifsFile->pid = current->tgid;
+	pCifsFile->pInode = newinode;
+	pCifsFile->invalidHandle = false;
+	pCifsFile->closePend = false;
+	mutex_init(&pCifsFile->fh_mutex);
+	mutex_init(&pCifsFile->lock_mutex);
+	INIT_LIST_HEAD(&pCifsFile->llist);
+	atomic_set(&pCifsFile->wrtPending, 0);
+
+	/* set the following in open now
+			pCifsFile->pfile = file; */
+	write_lock(&GlobalSMBSeslock);
+	list_add(&pCifsFile->tlist, &tcon->openFileList);
+	pCifsInode = CIFS_I(newinode);
+	if (pCifsInode) {
+		/* if readable file instance put first in list*/
+		if (write_only)
+			list_add_tail(&pCifsFile->flist,
+				      &pCifsInode->openFileList);
+		else
+			list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+
+		if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+			pCifsInode->clientCanCacheAll = true;
+			pCifsInode->clientCanCacheRead = true;
+			cFYI(1, ("Exclusive Oplock inode %p", newinode));
+		} else if ((oplock & 0xF) == OPLOCK_READ)
+				pCifsInode->clientCanCacheRead = true;
+	}
+	write_unlock(&GlobalSMBSeslock);
+}
+
 int cifs_posix_open(char *full_path, struct inode **pinode,
 		    struct super_block *sb, int mode, int oflags,
 		    int *poplock, __u16 *pnetfid, int xid)
 {
 	int rc;
 	__u32 oplock;
+	bool write_only = false;
 	FILE_UNIX_BASIC_INFO *presp_data;
 	__u32 posix_flags = 0;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
@@ -172,6 +222,8 @@
 	if (oflags & O_DIRECT)
 		posix_flags |= SMB_O_DIRECT;
 
+	if (!(oflags & FMODE_READ))
+		write_only = true;
 
 	rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
 			pnetfid, presp_data, &oplock, full_path,
@@ -187,8 +239,10 @@
 	if (!pinode)
 		goto posix_open_ret; /* caller does not need info */
 
-	if (*pinode == NULL)
-		*pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+	if (*pinode == NULL) {
+		__u64 unique_id = le64_to_cpu(presp_data->UniqueId);
+		*pinode = cifs_new_inode(sb, &unique_id);
+	}
 	/* else an inode was passed in. Update its info, don't create one */
 
 	/* We do not need to close the file if new_inode fails since
@@ -198,6 +252,8 @@
 
 	posix_fill_in_inode(*pinode, presp_data, 1);
 
+	cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+
 posix_open_ret:
 	kfree(presp_data);
 	return rc;
@@ -239,7 +295,6 @@
 	char *full_path = NULL;
 	FILE_ALL_INFO *buf = NULL;
 	struct inode *newinode = NULL;
-	struct cifsInodeInfo *pCifsInode;
 	int disposition = FILE_OVERWRITE_IF;
 	bool write_only = false;
 
@@ -410,44 +465,8 @@
 		/* mknod case - do not leave file open */
 		CIFSSMBClose(xid, tcon, fileHandle);
 	} else if (newinode) {
-		struct cifsFileInfo *pCifsFile =
-			kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
-		if (pCifsFile == NULL)
-			goto cifs_create_out;
-		pCifsFile->netfid = fileHandle;
-		pCifsFile->pid = current->tgid;
-		pCifsFile->pInode = newinode;
-		pCifsFile->invalidHandle = false;
-		pCifsFile->closePend     = false;
-		init_MUTEX(&pCifsFile->fh_sem);
-		mutex_init(&pCifsFile->lock_mutex);
-		INIT_LIST_HEAD(&pCifsFile->llist);
-		atomic_set(&pCifsFile->wrtPending, 0);
-
-		/* set the following in open now
-				pCifsFile->pfile = file; */
-		write_lock(&GlobalSMBSeslock);
-		list_add(&pCifsFile->tlist, &tcon->openFileList);
-		pCifsInode = CIFS_I(newinode);
-		if (pCifsInode) {
-			/* if readable file instance put first in list*/
-			if (write_only) {
-				list_add_tail(&pCifsFile->flist,
-					      &pCifsInode->openFileList);
-			} else {
-				list_add(&pCifsFile->flist,
-					 &pCifsInode->openFileList);
-			}
-			if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
-				pCifsInode->clientCanCacheAll = true;
-				pCifsInode->clientCanCacheRead = true;
-				cFYI(1, ("Exclusive Oplock inode %p",
-					newinode));
-			} else if ((oplock & 0xF) == OPLOCK_READ)
-				pCifsInode->clientCanCacheRead = true;
-		}
-		write_unlock(&GlobalSMBSeslock);
+			cifs_fill_fileinfo(newinode, fileHandle,
+					cifs_sb->tcon, write_only);
 	}
 cifs_create_out:
 	kfree(buf);
@@ -580,17 +599,21 @@
 	return rc;
 }
 
-
 struct dentry *
 cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 	    struct nameidata *nd)
 {
 	int xid;
 	int rc = 0; /* to get around spurious gcc warning, set to zero here */
+	int oplock = 0;
+	int mode;
+	__u16 fileHandle = 0;
+	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *pTcon;
 	struct inode *newInode = NULL;
 	char *full_path = NULL;
+	struct file *filp;
 
 	xid = GetXid();
 
@@ -632,12 +655,37 @@
 	}
 	cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode));
 
-	if (pTcon->unix_ext)
-		rc = cifs_get_inode_info_unix(&newInode, full_path,
-					      parent_dir_inode->i_sb, xid);
-	else
+	if (pTcon->unix_ext) {
+		if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
+				(nd->flags & LOOKUP_OPEN)) {
+			if (!((nd->intent.open.flags & O_CREAT) &&
+					(nd->intent.open.flags & O_EXCL))) {
+				mode = nd->intent.open.create_mode &
+						~current_umask();
+				rc = cifs_posix_open(full_path, &newInode,
+					parent_dir_inode->i_sb, mode,
+					nd->intent.open.flags, &oplock,
+					&fileHandle, xid);
+				/*
+				 * This code works around a bug in
+				 * samba posix open in samba versions 3.3.1
+				 * and earlier where create works
+				 * but open fails with invalid parameter.
+				 * If either of these error codes are
+				 * returned, follow the normal lookup.
+				 * Otherwise, the error during posix open
+				 * is handled.
+				 */
+				if ((rc != -EINVAL) && (rc != -EOPNOTSUPP))
+					posix_open = true;
+			}
+		}
+		if (!posix_open)
+			rc = cifs_get_inode_info_unix(&newInode, full_path,
+						parent_dir_inode->i_sb, xid);
+	} else
 		rc = cifs_get_inode_info(&newInode, full_path, NULL,
-					 parent_dir_inode->i_sb, xid, NULL);
+				parent_dir_inode->i_sb, xid, NULL);
 
 	if ((rc == 0) && (newInode != NULL)) {
 		if (pTcon->nocase)
@@ -645,7 +693,8 @@
 		else
 			direntry->d_op = &cifs_dentry_ops;
 		d_add(direntry, newInode);
-
+		if (posix_open)
+			filp = lookup_instantiate_filp(nd, direntry, NULL);
 		/* since paths are not looked up by component - the parent
 		   directories are presumed to be good here */
 		renew_parental_timestamps(direntry);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 1e0c1bd..df4a306 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -78,7 +78,7 @@
 	}
 
 	key->type_data.x[0] = datalen;
-	rcu_assign_pointer(key->payload.data, ip);
+	key->payload.data = ip;
 
 	return rc;
 }
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 81747ac..50ca088 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -46,7 +46,7 @@
 	memset(private_data, 0, sizeof(struct cifsFileInfo));
 	private_data->netfid = netfid;
 	private_data->pid = current->tgid;
-	init_MUTEX(&private_data->fh_sem);
+	mutex_init(&private_data->fh_mutex);
 	mutex_init(&private_data->lock_mutex);
 	INIT_LIST_HEAD(&private_data->llist);
 	private_data->pfile = file; /* needed for writepage */
@@ -284,35 +284,32 @@
 	cifs_sb = CIFS_SB(inode->i_sb);
 	tcon = cifs_sb->tcon;
 
-	if (file->f_flags & O_CREAT) {
-		/* search inode for this file and fill in file->private_data */
-		pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-		read_lock(&GlobalSMBSeslock);
-		list_for_each(tmp, &pCifsInode->openFileList) {
-			pCifsFile = list_entry(tmp, struct cifsFileInfo,
-					       flist);
-			if ((pCifsFile->pfile == NULL) &&
-			    (pCifsFile->pid == current->tgid)) {
-				/* mode set in cifs_create */
+	/* search inode for this file and fill in file->private_data */
+	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+	read_lock(&GlobalSMBSeslock);
+	list_for_each(tmp, &pCifsInode->openFileList) {
+		pCifsFile = list_entry(tmp, struct cifsFileInfo,
+				       flist);
+		if ((pCifsFile->pfile == NULL) &&
+		    (pCifsFile->pid == current->tgid)) {
+			/* mode set in cifs_create */
 
-				/* needed for writepage */
-				pCifsFile->pfile = file;
+			/* needed for writepage */
+			pCifsFile->pfile = file;
 
-				file->private_data = pCifsFile;
-				break;
-			}
-		}
-		read_unlock(&GlobalSMBSeslock);
-		if (file->private_data != NULL) {
-			rc = 0;
-			FreeXid(xid);
-			return rc;
-		} else {
-			if (file->f_flags & O_EXCL)
-				cERROR(1, ("could not find file instance for "
-					   "new file %p", file));
+			file->private_data = pCifsFile;
+			break;
 		}
 	}
+	read_unlock(&GlobalSMBSeslock);
+
+	if (file->private_data != NULL) {
+		rc = 0;
+		FreeXid(xid);
+		return rc;
+	} else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+			cERROR(1, ("could not find file instance for "
+				   "new file %p", file));
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
@@ -500,9 +497,9 @@
 		return -EBADF;
 
 	xid = GetXid();
-	down(&pCifsFile->fh_sem);
+	mutex_unlock(&pCifsFile->fh_mutex);
 	if (!pCifsFile->invalidHandle) {
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		FreeXid(xid);
 		return 0;
 	}
@@ -533,7 +530,7 @@
 	if (full_path == NULL) {
 		rc = -ENOMEM;
 reopen_error_exit:
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		FreeXid(xid);
 		return rc;
 	}
@@ -575,14 +572,14 @@
 			 cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 				CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc) {
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		cFYI(1, ("cifs_open returned 0x%x", rc));
 		cFYI(1, ("oplock: %d", oplock));
 	} else {
 reopen_success:
 		pCifsFile->netfid = netfid;
 		pCifsFile->invalidHandle = false;
-		up(&pCifsFile->fh_sem);
+		mutex_lock(&pCifsFile->fh_mutex);
 		pCifsInode = CIFS_I(inode);
 		if (pCifsInode) {
 			if (can_flush) {
@@ -971,6 +968,40 @@
 	return rc;
 }
 
+/*
+ * Set the timeout on write requests past EOF. For some servers (Windows)
+ * these calls can be very long.
+ *
+ * If we're writing >10M past the EOF we give a 180s timeout. Anything less
+ * than that gets a 45s timeout. Writes not past EOF get 15s timeouts.
+ * The 10M cutoff is totally arbitrary. A better scheme for this would be
+ * welcome if someone wants to suggest one.
+ *
+ * We may be able to do a better job with this if there were some way to
+ * declare that a file should be sparse.
+ */
+static int
+cifs_write_timeout(struct cifsInodeInfo *cifsi, loff_t offset)
+{
+	if (offset <= cifsi->server_eof)
+		return CIFS_STD_OP;
+	else if (offset > (cifsi->server_eof + (10 * 1024 * 1024)))
+		return CIFS_VLONG_OP;
+	else
+		return CIFS_LONG_OP;
+}
+
+/* update the file size (if needed) after a write */
+static void
+cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
+		      unsigned int bytes_written)
+{
+	loff_t end_of_write = offset + bytes_written;
+
+	if (end_of_write > cifsi->server_eof)
+		cifsi->server_eof = end_of_write;
+}
+
 ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 	size_t write_size, loff_t *poffset)
 {
@@ -981,6 +1012,7 @@
 	struct cifsTconInfo *pTcon;
 	int xid, long_op;
 	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
 
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 
@@ -1000,11 +1032,7 @@
 
 	xid = GetXid();
 
-	if (*poffset > file->f_path.dentry->d_inode->i_size)
-		long_op = CIFS_VLONG_OP; /* writes past EOF take long time */
-	else
-		long_op = CIFS_LONG_OP;
-
+	long_op = cifs_write_timeout(cifsi, *poffset);
 	for (total_written = 0; write_size > total_written;
 	     total_written += bytes_written) {
 		rc = -EAGAIN;
@@ -1048,8 +1076,10 @@
 				FreeXid(xid);
 				return rc;
 			}
-		} else
+		} else {
+			cifs_update_eof(cifsi, *poffset, bytes_written);
 			*poffset += bytes_written;
+		}
 		long_op = CIFS_STD_OP; /* subsequent writes fast -
 				    15 seconds is plenty */
 	}
@@ -1085,6 +1115,7 @@
 	struct cifsTconInfo *pTcon;
 	int xid, long_op;
 	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
 
 	cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
 
@@ -1099,11 +1130,7 @@
 
 	xid = GetXid();
 
-	if (*poffset > file->f_path.dentry->d_inode->i_size)
-		long_op = CIFS_VLONG_OP; /* writes past EOF can be slow */
-	else
-		long_op = CIFS_LONG_OP;
-
+	long_op = cifs_write_timeout(cifsi, *poffset);
 	for (total_written = 0; write_size > total_written;
 	     total_written += bytes_written) {
 		rc = -EAGAIN;
@@ -1166,8 +1193,10 @@
 				FreeXid(xid);
 				return rc;
 			}
-		} else
+		} else {
+			cifs_update_eof(cifsi, *poffset, bytes_written);
 			*poffset += bytes_written;
+		}
 		long_op = CIFS_STD_OP; /* subsequent writes fast -
 				    15 seconds is plenty */
 	}
@@ -1380,11 +1409,12 @@
 	int nr_pages;
 	__u64 offset = 0;
 	struct cifsFileInfo *open_file;
+	struct cifsInodeInfo *cifsi = CIFS_I(mapping->host);
 	struct page *page;
 	struct pagevec pvec;
 	int rc = 0;
 	int scanned = 0;
-	int xid;
+	int xid, long_op;
 
 	cifs_sb = CIFS_SB(mapping->host->i_sb);
 
@@ -1528,12 +1558,15 @@
 				cERROR(1, ("No writable handles for inode"));
 				rc = -EBADF;
 			} else {
+				long_op = cifs_write_timeout(cifsi, offset);
 				rc = CIFSSMBWrite2(xid, cifs_sb->tcon,
 						   open_file->netfid,
 						   bytes_to_write, offset,
 						   &bytes_written, iov, n_iov,
-						   CIFS_LONG_OP);
+						   long_op);
 				atomic_dec(&open_file->wrtPending);
+				cifs_update_eof(cifsi, offset, bytes_written);
+
 				if (rc || bytes_written < bytes_to_write) {
 					cERROR(1, ("Write2 ret %d, wrote %d",
 						  rc, bytes_written));
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index f121a80..f36b4e4 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -143,6 +143,7 @@
 
 	inode->i_nlink = le64_to_cpu(info->Nlinks);
 
+	cifsInfo->server_eof = end_of_file;
 	spin_lock(&inode->i_lock);
 	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
 		/*
@@ -276,7 +277,8 @@
 
 	/* get new inode */
 	if (*pinode == NULL) {
-		*pinode = cifs_new_inode(sb, &find_data.UniqueId);
+		__u64 unique_id = le64_to_cpu(find_data.UniqueId);
+		*pinode = cifs_new_inode(sb, &unique_id);
 		if (*pinode == NULL) {
 			rc = -ENOMEM;
 			goto cgiiu_exit;
@@ -605,12 +607,12 @@
 			inode->i_mode |= S_IFREG;
 	}
 
+	cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
 	spin_lock(&inode->i_lock);
-	if (is_size_safe_to_change(cifsInfo,
-				   le64_to_cpu(pfindData->EndOfFile))) {
+	if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
 		/* can not safely shrink the file size here if the
 		   client is writing to it due to potential races */
-		i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+		i_size_write(inode, cifsInfo->server_eof);
 
 		/* 512 bytes (2**9) is the fake blocksize that must be
 		   used for this calculation */
@@ -1138,6 +1140,7 @@
 			cFYI(1, ("posix mkdir returned 0x%x", rc));
 			d_drop(direntry);
 		} else {
+			__u64 unique_id;
 			if (pInfo->Type == cpu_to_le32(-1)) {
 				/* no return info, go query for it */
 				kfree(pInfo);
@@ -1151,8 +1154,8 @@
 			else
 				direntry->d_op = &cifs_dentry_ops;
 
-			newinode = cifs_new_inode(inode->i_sb,
-						  &pInfo->UniqueId);
+			unique_id = le64_to_cpu(pInfo->UniqueId);
+			newinode = cifs_new_inode(inode->i_sb, &unique_id);
 			if (newinode == NULL) {
 				kfree(pInfo);
 				goto mkdir_get_info;
@@ -1450,7 +1453,8 @@
 		     checking the UniqueId via FILE_INTERNAL_INFO */
 
 unlink_target:
-	if ((rc == -EACCES) || (rc == -EEXIST)) {
+	/* Try unlinking the target dentry if it's not negative */
+	if (target_dentry->d_inode && (rc == -EACCES || rc == -EEXIST)) {
 		tmprc = cifs_unlink(target_dir, target_dentry);
 		if (tmprc)
 			goto cifs_rename_exit;
@@ -1753,6 +1757,7 @@
 	}
 
 	if (rc == 0) {
+		cifsInode->server_eof = attrs->ia_size;
 		rc = cifs_vmtruncate(inode, attrs->ia_size);
 		cifs_truncate_page(inode->i_mapping, inode->i_size);
 	}
@@ -1792,20 +1797,21 @@
 		goto out;
 	}
 
-	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
-		/*
-		   Flush data before changing file size or changing the last
-		   write time of the file on the server. If the
-		   flush returns error, store it to report later and continue.
-		   BB: This should be smarter. Why bother flushing pages that
-		   will be truncated anyway? Also, should we error out here if
-		   the flush returns error?
-		 */
-		rc = filemap_write_and_wait(inode->i_mapping);
-		if (rc != 0) {
-			cifsInode->write_behind_rc = rc;
-			rc = 0;
-		}
+	/*
+	 * Attempt to flush data before changing attributes. We need to do
+	 * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+	 * ownership or mode then we may also need to do this. Here, we take
+	 * the safe way out and just do the flush on all setattr requests. If
+	 * the flush returns error, store it to report later and continue.
+	 *
+	 * BB: This should be smarter. Why bother flushing pages that
+	 * will be truncated anyway? Also, should we error out here if
+	 * the flush returns error?
+	 */
+	rc = filemap_write_and_wait(inode->i_mapping);
+	if (rc != 0) {
+		cifsInode->write_behind_rc = rc;
+		rc = 0;
 	}
 
 	if (attrs->ia_valid & ATTR_SIZE) {
@@ -1903,20 +1909,21 @@
 		return -ENOMEM;
 	}
 
-	if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
-		/*
-		   Flush data before changing file size or changing the last
-		   write time of the file on the server. If the
-		   flush returns error, store it to report later and continue.
-		   BB: This should be smarter. Why bother flushing pages that
-		   will be truncated anyway? Also, should we error out here if
-		   the flush returns error?
-		 */
-		rc = filemap_write_and_wait(inode->i_mapping);
-		if (rc != 0) {
-			cifsInode->write_behind_rc = rc;
-			rc = 0;
-		}
+	/*
+	 * Attempt to flush data before changing attributes. We need to do
+	 * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+	 * ownership or mode then we may also need to do this. Here, we take
+	 * the safe way out and just do the flush on all setattr requests. If
+	 * the flush returns error, store it to report later and continue.
+	 *
+	 * BB: This should be smarter. Why bother flushing pages that
+	 * will be truncated anyway? Also, should we error out here if
+	 * the flush returns error?
+	 */
+	rc = filemap_write_and_wait(inode->i_mapping);
+	if (rc != 0) {
+		cifsInode->write_behind_rc = rc;
+		rc = 0;
 	}
 
 	if (attrs->ia_valid & ATTR_SIZE) {
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index c2c01ff..1a8be62 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -239,6 +239,7 @@
 	if (atomic_read(&cifsInfo->inUse) == 0)
 		atomic_set(&cifsInfo->inUse, 1);
 
+	cifsInfo->server_eof = end_of_file;
 	spin_lock(&tmp_inode->i_lock);
 	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
 		/* can not safely change the file size here if the
@@ -375,6 +376,7 @@
 		tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
 	tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
 
+	cifsInfo->server_eof = end_of_file;
 	spin_lock(&tmp_inode->i_lock);
 	if (is_size_safe_to_change(cifsInfo, end_of_file)) {
 		/* can not safely change the file size here if the
@@ -840,7 +842,7 @@
 			len = strnlen(filename, PATH_MAX);
 		}
 
-		*pinum = pFindData->UniqueId;
+		*pinum = le64_to_cpu(pFindData->UniqueId);
 	} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
 		FILE_DIRECTORY_INFO *pFindData =
 			(FILE_DIRECTORY_INFO *)current_entry;
@@ -856,7 +858,7 @@
 			(SEARCH_ID_FULL_DIR_INFO *)current_entry;
 		filename = &pFindData->FileName[0];
 		len = le32_to_cpu(pFindData->FileNameLength);
-		*pinum = pFindData->UniqueId;
+		*pinum = le64_to_cpu(pFindData->UniqueId);
 	} else if (level == SMB_FIND_FILE_BOTH_DIRECTORY_INFO) {
 		FILE_BOTH_DIRECTORY_INFO *pFindData =
 			(FILE_BOTH_DIRECTORY_INFO *)current_entry;
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 5c68b42..c652c73 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -285,35 +285,36 @@
 	int words_left, len;
 	char *data = *pbcc_area;
 
-
-
 	cFYI(1, ("bleft %d", bleft));
 
-
-	/* SMB header is unaligned, so cifs servers word align start of
-	   Unicode strings */
-	data++;
-	bleft--; /* Windows servers do not always double null terminate
-		    their final Unicode string - in which case we
-		    now will not attempt to decode the byte of junk
-		    which follows it */
+	/*
+	 * Windows servers do not always double null terminate their final
+	 * Unicode string. Check to see if there are an uneven number of bytes
+	 * left. If so, then add an extra NULL pad byte to the end of the
+	 * response.
+	 *
+	 * See section 2.7.2 in "Implementing CIFS" for details
+	 */
+	if (bleft % 2) {
+		data[bleft] = 0;
+		++bleft;
+	}
 
 	words_left = bleft / 2;
 
 	/* save off server operating system */
 	len = UniStrnlen((wchar_t *) data, words_left);
 
-/* We look for obvious messed up bcc or strings in response so we do not go off
-   the end since (at least) WIN2K and Windows XP have a major bug in not null
-   terminating last Unicode string in response  */
 	if (len >= words_left)
 		return rc;
 
 	kfree(ses->serverOS);
 	/* UTF-8 string will not grow more than four times as big as UCS-16 */
 	ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
-	if (ses->serverOS != NULL)
+	if (ses->serverOS != NULL) {
 		cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
+		cFYI(1, ("serverOS=%s", ses->serverOS));
+	}
 	data += 2 * (len + 1);
 	words_left -= len + 1;
 
@@ -328,6 +329,7 @@
 	if (ses->serverNOS != NULL) {
 		cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
 				   nls_cp);
+		cFYI(1, ("serverNOS=%s", ses->serverNOS));
 		if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
 			cFYI(1, ("NT4 server"));
 			ses->flags |= CIFS_SES_NT4;
@@ -343,12 +345,11 @@
 		return rc;
 
 	kfree(ses->serverDomain);
-	ses->serverDomain = kzalloc(2 * (len + 1), GFP_KERNEL); /* BB FIXME wrong length */
+	ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
 	if (ses->serverDomain != NULL) {
 		cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
 				   nls_cp);
-		ses->serverDomain[2*len] = 0;
-		ses->serverDomain[(2*len) + 1] = 0;
+		cFYI(1, ("serverDomain=%s", ses->serverDomain));
 	}
 	data += 2 * (len + 1);
 	words_left -= len + 1;
@@ -702,12 +703,18 @@
 	}
 
 	/* BB check if Unicode and decode strings */
-	if (smb_buf->Flags2 & SMBFLG2_UNICODE)
+	if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
+		/* unicode string area must be word-aligned */
+		if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) {
+			++bcc_ptr;
+			--bytes_remaining;
+		}
 		rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
-						   ses, nls_cp);
-	else
+					   ses, nls_cp);
+	} else {
 		rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
 					 ses, nls_cp);
+	}
 
 ssetup_exit:
 	if (spnego_key) {
diff --git a/fs/compat.c b/fs/compat.c
index 3f84d5f..681ed81 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -181,22 +181,24 @@
 		struct compat_stat __user *statbuf)
 {
 	struct kstat stat;
-	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_compat_stat(&stat, statbuf);
-	return error;
+	error = vfs_stat(filename, &stat);
+	if (error)
+		return error;
+	return cp_compat_stat(&stat, statbuf);
 }
 
 asmlinkage long compat_sys_newlstat(char __user * filename,
 		struct compat_stat __user *statbuf)
 {
 	struct kstat stat;
-	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_compat_stat(&stat, statbuf);
-	return error;
+	error = vfs_lstat(filename, &stat);
+	if (error)
+		return error;
+	return cp_compat_stat(&stat, statbuf);
 }
 
 #ifndef __ARCH_WANT_STAT64
@@ -204,21 +206,12 @@
 		struct compat_stat __user *statbuf, int flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_compat_stat(&stat, statbuf);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_compat_stat(&stat, statbuf);
 }
 #endif
 
@@ -1483,6 +1476,7 @@
 	struct linux_binprm *bprm;
 	struct file *file;
 	struct files_struct *displaced;
+	bool clear_in_exec;
 	int retval;
 
 	retval = unshare_files(&displaced);
@@ -1505,8 +1499,9 @@
 		goto out_unlock;
 
 	retval = check_unsafe_exec(bprm);
-	if (retval)
+	if (retval < 0)
 		goto out_unlock;
+	clear_in_exec = retval;
 
 	file = open_exec(filename);
 	retval = PTR_ERR(file);
@@ -1553,9 +1548,7 @@
 		goto out;
 
 	/* execve succeeded */
-	write_lock(&current->fs->lock);
 	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
 	current->in_execve = 0;
 	mutex_unlock(&current->cred_exec_mutex);
 	acct_update_integrals(current);
@@ -1575,9 +1568,8 @@
 	}
 
 out_unmark:
-	write_lock(&current->fs->lock);
-	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
+	if (clear_in_exec)
+		current->fs->in_exec = 0;
 
 out_unlock:
 	current->in_execve = 0;
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 3e87ce4..b83f6bc 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -58,7 +58,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-dev.h>
 #include <linux/atalk.h>
-#include <linux/loop.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci.h>
@@ -68,6 +67,7 @@
 #include <linux/gigaset_dev.h>
 
 #ifdef CONFIG_BLOCK
+#include <linux/loop.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_ioctl.h>
 #include <scsi/sg.h>
@@ -2660,6 +2660,8 @@
 HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl)
 /* block stuff */
 #ifdef CONFIG_BLOCK
+/* loop */
+IGNORE_IOCTL(LOOP_CLR_FD)
 /* Raw devices */
 HANDLE_IOCTL(RAW_SETBIND, raw_ioctl)
 HANDLE_IOCTL(RAW_GETBIND, raw_ioctl)
@@ -2728,9 +2730,6 @@
 IGNORE_IOCTL(VFAT_IOCTL_READDIR_BOTH32)
 IGNORE_IOCTL(VFAT_IOCTL_READDIR_SHORT32)
 
-/* loop */
-IGNORE_IOCTL(LOOP_CLR_FD)
-
 #ifdef CONFIG_SPARC
 /* Sparc framebuffers, handled in sbusfb_compat_ioctl() */
 IGNORE_IOCTL(FBIOGTYPE)
diff --git a/fs/dcache.c b/fs/dcache.c
index 761d30b..1fcffeb 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2149,7 +2149,6 @@
 	int result;
 	unsigned long seq;
 
-	/* FIXME: This is old behavior, needed? Please check callers. */
 	if (new_dentry == old_dentry)
 		return 1;
 
diff --git a/fs/direct-io.c b/fs/direct-io.c
index da258e7..05763bb 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -307,8 +307,6 @@
 	struct bio *bio;
 
 	bio = bio_alloc(GFP_KERNEL, nr_vecs);
-	if (bio == NULL)
-		return -ENOMEM;
 
 	bio->bi_bdev = bdev;
 	bio->bi_sector = first_sector;
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 8b65f28..b91851f 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -483,15 +483,7 @@
 	ecryptfs_inode = page->mapping->host;
 	crypt_stat =
 		&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
-	if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
-		rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page,
-						       0, PAGE_CACHE_SIZE);
-		if (rc)
-			printk(KERN_ERR "%s: Error attempting to copy "
-			       "page at index [%ld]\n", __func__,
-			       page->index);
-		goto out;
-	}
+	BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
 	enc_extent_page = alloc_page(GFP_USER);
 	if (!enc_extent_page) {
 		rc = -ENOMEM;
@@ -620,16 +612,7 @@
 	ecryptfs_inode = page->mapping->host;
 	crypt_stat =
 		&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
-	if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
-		rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
-						      PAGE_CACHE_SIZE,
-						      ecryptfs_inode);
-		if (rc)
-			printk(KERN_ERR "%s: Error attempting to copy "
-			       "page at index [%ld]\n", __func__,
-			       page->index);
-		goto out;
-	}
+	BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
 	enc_extent_page = alloc_page(GFP_USER);
 	if (!enc_extent_page) {
 		rc = -ENOMEM;
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 064c582..00b30a2 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -269,6 +269,7 @@
 #define ECRYPTFS_ENCRYPT_FILENAMES    0x00000800
 #define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00001000
 #define ECRYPTFS_ENCFN_USE_FEK        0x00002000
+#define ECRYPTFS_UNLINK_SIGS	      0x00004000
 	u32 flags;
 	unsigned int file_version;
 	size_t iv_bytes;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 55b3145..93bc0f8 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -379,9 +379,11 @@
 		goto out_d_drop;
 	}
 	lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
 	lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
 				      lower_dir_dentry,
 				      ecryptfs_dentry->d_name.len);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
 		printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
@@ -406,9 +408,11 @@
 		       "filename; rc = [%d]\n", __func__, rc);
 		goto out_d_drop;
 	}
+	mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
 	lower_dentry = lookup_one_len(encrypted_and_encoded_name,
 				      lower_dir_dentry,
 				      encrypted_and_encoded_name_size - 1);
+	mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
 	if (IS_ERR(lower_dentry)) {
 		rc = PTR_ERR(lower_dentry);
 		printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
@@ -636,8 +640,9 @@
 ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
 {
 	char *lower_buf;
+	size_t lower_bufsiz;
 	struct dentry *lower_dentry;
-	struct ecryptfs_crypt_stat *crypt_stat;
+	struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
 	char *plaintext_name;
 	size_t plaintext_name_size;
 	mm_segment_t old_fs;
@@ -648,12 +653,21 @@
 		rc = -EINVAL;
 		goto out;
 	}
-	crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
+	mount_crypt_stat = &ecryptfs_superblock_to_private(
+						dentry->d_sb)->mount_crypt_stat;
+	/*
+	 * If the lower filename is encrypted, it will result in a significantly
+	 * longer name.  If needed, truncate the name after decode and decrypt.
+	 */
+	if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+		lower_bufsiz = PATH_MAX;
+	else
+		lower_bufsiz = bufsiz;
 	/* Released in this function */
-	lower_buf = kmalloc(bufsiz, GFP_KERNEL);
+	lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
 	if (lower_buf == NULL) {
 		printk(KERN_ERR "%s: Out of memory whilst attempting to "
-		       "kmalloc [%d] bytes\n", __func__, bufsiz);
+		       "kmalloc [%d] bytes\n", __func__, lower_bufsiz);
 		rc = -ENOMEM;
 		goto out;
 	}
@@ -661,7 +675,7 @@
 	set_fs(get_ds());
 	rc = lower_dentry->d_inode->i_op->readlink(lower_dentry,
 						   (char __user *)lower_buf,
-						   bufsiz);
+						   lower_bufsiz);
 	set_fs(old_fs);
 	if (rc >= 0) {
 		rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name,
@@ -674,7 +688,9 @@
 				rc);
 			goto out_free_lower_buf;
 		}
-		rc = copy_to_user(buf, plaintext_name, plaintext_name_size);
+		/* Check for bufsiz <= 0 done in sys_readlinkat() */
+		rc = copy_to_user(buf, plaintext_name,
+				  min((unsigned) bufsiz, plaintext_name_size));
 		if (rc)
 			rc = -EFAULT;
 		else
@@ -814,6 +830,13 @@
 		size_t num_zeros = (PAGE_CACHE_SIZE
 				    - (new_length & ~PAGE_CACHE_MASK));
 
+		if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+			rc = vmtruncate(inode, new_length);
+			if (rc)
+				goto out_free;
+			rc = vmtruncate(lower_dentry->d_inode, new_length);
+			goto out_free;
+		}
 		if (num_zeros) {
 			char *zeros_virt;
 
@@ -915,8 +938,6 @@
 			}
 			rc = 0;
 			crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
-			mutex_unlock(&crypt_stat->cs_mutex);
-			goto out;
 		}
 	}
 	mutex_unlock(&crypt_stat->cs_mutex);
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index aed56c2..ccabd5f 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -190,14 +190,14 @@
 		init_special_inode(inode, lower_inode->i_mode,
 				   lower_inode->i_rdev);
 	dentry->d_op = &ecryptfs_dops;
-	if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
-		d_add(dentry, inode);
-	else
-		d_instantiate(dentry, inode);
 	fsstack_copy_attr_all(inode, lower_inode, NULL);
 	/* This size will be overwritten for real files w/ headers and
 	 * other metadata */
 	fsstack_copy_inode_size(inode, lower_inode);
+	if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
+		d_add(dentry, inode);
+	else
+		d_instantiate(dentry, inode);
 out:
 	return rc;
 }
@@ -208,7 +208,7 @@
        ecryptfs_opt_passthrough, ecryptfs_opt_xattr_metadata,
        ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig,
        ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes,
-       ecryptfs_opt_err };
+       ecryptfs_opt_unlink_sigs, ecryptfs_opt_err };
 
 static const match_table_t tokens = {
 	{ecryptfs_opt_sig, "sig=%s"},
@@ -222,6 +222,7 @@
 	{ecryptfs_opt_fnek_sig, "ecryptfs_fnek_sig=%s"},
 	{ecryptfs_opt_fn_cipher, "ecryptfs_fn_cipher=%s"},
 	{ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"},
+	{ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"},
 	{ecryptfs_opt_err, NULL}
 };
 
@@ -402,6 +403,9 @@
 				fn_cipher_key_bytes;
 			fn_cipher_key_bytes_set = 1;
 			break;
+		case ecryptfs_opt_unlink_sigs:
+			mount_crypt_stat->flags |= ECRYPTFS_UNLINK_SIGS;
+			break;
 		case ecryptfs_opt_err:
 		default:
 			printk(KERN_WARNING
diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c
index 295e7fa5..f1c17e8 100644
--- a/fs/ecryptfs/messaging.c
+++ b/fs/ecryptfs/messaging.c
@@ -133,45 +133,6 @@
 	return rc;
 }
 
-static int
-ecryptfs_send_message_locked(char *data, int data_len, u8 msg_type,
-			     struct ecryptfs_msg_ctx **msg_ctx);
-
-/**
- * ecryptfs_send_raw_message
- * @msg_type: Message type
- * @daemon: Daemon struct for recipient of message
- *
- * A raw message is one that does not include an ecryptfs_message
- * struct. It simply has a type.
- *
- * Must be called with ecryptfs_daemon_hash_mux held.
- *
- * Returns zero on success; non-zero otherwise
- */
-static int ecryptfs_send_raw_message(u8 msg_type,
-				     struct ecryptfs_daemon *daemon)
-{
-	struct ecryptfs_msg_ctx *msg_ctx;
-	int rc;
-
-	rc = ecryptfs_send_message_locked(NULL, 0, msg_type, &msg_ctx);
-	if (rc) {
-		printk(KERN_ERR "%s: Error whilst attempting to send "
-		       "message to ecryptfsd; rc = [%d]\n", __func__, rc);
-		goto out;
-	}
-	/* Raw messages are logically context-free (e.g., no
-	 * reply is expected), so we set the state of the
-	 * ecryptfs_msg_ctx object to indicate that it should
-	 * be freed as soon as the message is sent. */
-	mutex_lock(&msg_ctx->mux);
-	msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_NO_REPLY;
-	mutex_unlock(&msg_ctx->mux);
-out:
-	return rc;
-}
-
 /**
  * ecryptfs_spawn_daemon - Create and initialize a new daemon struct
  * @daemon: Pointer to set to newly allocated daemon struct
@@ -212,49 +173,6 @@
 }
 
 /**
- * ecryptfs_process_helo
- * @euid: The user ID owner of the message
- * @user_ns: The namespace in which @euid applies
- * @pid: The process ID for the userspace program that sent the
- *       message
- *
- * Adds the euid and pid values to the daemon euid hash.  If an euid
- * already has a daemon pid registered, the daemon will be
- * unregistered before the new daemon is put into the hash list.
- * Returns zero after adding a new daemon to the hash list;
- * non-zero otherwise.
- */
-int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns,
-			  struct pid *pid)
-{
-	struct ecryptfs_daemon *new_daemon;
-	struct ecryptfs_daemon *old_daemon;
-	int rc;
-
-	mutex_lock(&ecryptfs_daemon_hash_mux);
-	rc = ecryptfs_find_daemon_by_euid(&old_daemon, euid, user_ns);
-	if (rc != 0) {
-		printk(KERN_WARNING "Received request from user [%d] "
-		       "to register daemon [0x%p]; unregistering daemon "
-		       "[0x%p]\n", euid, pid, old_daemon->pid);
-		rc = ecryptfs_send_raw_message(ECRYPTFS_MSG_QUIT, old_daemon);
-		if (rc)
-			printk(KERN_WARNING "Failed to send QUIT "
-			       "message to daemon [0x%p]; rc = [%d]\n",
-			       old_daemon->pid, rc);
-		hlist_del(&old_daemon->euid_chain);
-		kfree(old_daemon);
-	}
-	rc = ecryptfs_spawn_daemon(&new_daemon, euid, user_ns, pid);
-	if (rc)
-		printk(KERN_ERR "%s: The gods are displeased with this attempt "
-		       "to create a new daemon object for euid [%d]; pid "
-		       "[0x%p]; rc = [%d]\n", __func__, euid, pid, rc);
-	mutex_unlock(&ecryptfs_daemon_hash_mux);
-	return rc;
-}
-
-/**
  * ecryptfs_exorcise_daemon - Destroy the daemon struct
  *
  * Must be called ceremoniously while in possession of
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index a67fea6..4ec8f61 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -193,26 +193,20 @@
 	int rc = 0;
 
 	mutex_lock(&msg_ctx->mux);
-	if (data) {
-		msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
-				       GFP_KERNEL);
-		if (!msg_ctx->msg) {
-			rc = -ENOMEM;
-			printk(KERN_ERR "%s: Out of memory whilst attempting "
-			       "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
-			       (sizeof(*msg_ctx->msg) + data_size));
-			goto out_unlock;
-		}
-	} else
-		msg_ctx->msg = NULL;
+	msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
+			       GFP_KERNEL);
+	if (!msg_ctx->msg) {
+		rc = -ENOMEM;
+		printk(KERN_ERR "%s: Out of memory whilst attempting "
+		       "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
+		       (sizeof(*msg_ctx->msg) + data_size));
+		goto out_unlock;
+	}
 	msg_ctx->msg->index = msg_ctx->index;
 	msg_ctx->msg->data_len = data_size;
 	msg_ctx->type = msg_type;
-	if (data) {
-		memcpy(msg_ctx->msg->data, data, data_size);
-		msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
-	} else
-		msg_ctx->msg_size = 0;
+	memcpy(msg_ctx->msg->data, data, data_size);
+	msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
 	mutex_lock(&daemon->mux);
 	list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
 	daemon->num_queued_msg_ctx++;
@@ -418,18 +412,13 @@
 
 	if (count == 0)
 		goto out;
-	data = kmalloc(count, GFP_KERNEL);
-	if (!data) {
-		printk(KERN_ERR "%s: Out of memory whilst attempting to "
-		       "kmalloc([%zd], GFP_KERNEL)\n", __func__, count);
+
+	data = memdup_user(buf, count);
+	if (IS_ERR(data)) {
+		printk(KERN_ERR "%s: memdup_user returned error [%ld]\n",
+		       __func__, PTR_ERR(data));
 		goto out;
 	}
-	rc = copy_from_user(data, buf, count);
-	if (rc) {
-		printk(KERN_ERR "%s: copy_from_user returned error [%d]\n",
-		       __func__, rc);
-		goto out_free;
-	}
 	sz = count;
 	i = 0;
 	switch (data[i++]) {
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index 46cec2b..5c6bab9 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -449,6 +449,7 @@
 	struct ecryptfs_crypt_stat *crypt_stat;
 
 	crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
+	BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
 	if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
 		return ecryptfs_write_inode_size_to_xattr(ecryptfs_inode);
 	else
@@ -490,6 +491,16 @@
 		ecryptfs_printk(KERN_DEBUG, "Not a new file\n");
 	ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page"
 			"(page w/ index = [0x%.16x], to = [%d])\n", index, to);
+	if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+		rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, 0,
+						       to);
+		if (!rc) {
+			rc = copied;
+			fsstack_copy_inode_size(ecryptfs_inode,
+				ecryptfs_inode_to_lower(ecryptfs_inode));
+		}
+		goto out;
+	}
 	/* Fills in zeros if 'to' goes beyond inode size */
 	rc = fill_zeros_to_end_of_page(page, to);
 	if (rc) {
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index 75c2ea9..a137c6e 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -117,13 +117,15 @@
 		   size_t size)
 {
 	struct page *ecryptfs_page;
+	struct ecryptfs_crypt_stat *crypt_stat;
+	struct inode *ecryptfs_inode = ecryptfs_file->f_dentry->d_inode;
 	char *ecryptfs_page_virt;
-	loff_t ecryptfs_file_size =
-		i_size_read(ecryptfs_file->f_dentry->d_inode);
+	loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode);
 	loff_t data_offset = 0;
 	loff_t pos;
 	int rc = 0;
 
+	crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
 	/*
 	 * if we are writing beyond current size, then start pos
 	 * at the current size - we'll fill in zeros from there.
@@ -184,7 +186,13 @@
 		flush_dcache_page(ecryptfs_page);
 		SetPageUptodate(ecryptfs_page);
 		unlock_page(ecryptfs_page);
-		rc = ecryptfs_encrypt_page(ecryptfs_page);
+		if (crypt_stat->flags & ECRYPTFS_ENCRYPTED)
+			rc = ecryptfs_encrypt_page(ecryptfs_page);
+		else
+			rc = ecryptfs_write_lower_page_segment(ecryptfs_inode,
+						ecryptfs_page,
+						start_offset_in_page,
+						data_offset);
 		page_cache_release(ecryptfs_page);
 		if (rc) {
 			printk(KERN_ERR "%s: Error encrypting "
@@ -194,14 +202,16 @@
 		pos += num_bytes;
 	}
 	if ((offset + size) > ecryptfs_file_size) {
-		i_size_write(ecryptfs_file->f_dentry->d_inode, (offset + size));
-		rc = ecryptfs_write_inode_size_to_metadata(
-			ecryptfs_file->f_dentry->d_inode);
-		if (rc) {
-			printk(KERN_ERR	"Problem with "
-			       "ecryptfs_write_inode_size_to_metadata; "
-			       "rc = [%d]\n", rc);
-			goto out;
+		i_size_write(ecryptfs_inode, (offset + size));
+		if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) {
+			rc = ecryptfs_write_inode_size_to_metadata(
+								ecryptfs_inode);
+			if (rc) {
+				printk(KERN_ERR	"Problem with "
+				       "ecryptfs_write_inode_size_to_metadata; "
+				       "rc = [%d]\n", rc);
+				goto out;
+			}
 		}
 	}
 out:
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index c27ac2b..fa4c7e7 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -170,7 +170,10 @@
 	list_for_each_entry(walker,
 			    &mount_crypt_stat->global_auth_tok_list,
 			    mount_crypt_stat_list) {
-		seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
+		if (walker->flags & ECRYPTFS_AUTH_TOK_FNEK)
+			seq_printf(m, ",ecryptfs_fnek_sig=%s", walker->sig);
+		else
+			seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
 	}
 	mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
 
@@ -186,6 +189,8 @@
 		seq_printf(m, ",ecryptfs_xattr_metadata");
 	if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
 		seq_printf(m, ",ecryptfs_encrypted_view");
+	if (mount_crypt_stat->flags & ECRYPTFS_UNLINK_SIGS)
+		seq_printf(m, ",ecryptfs_unlink_sigs");
 
 	return 0;
 }
diff --git a/fs/exec.c b/fs/exec.c
index 052a961..a3a8ce8 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1060,7 +1060,6 @@
 int check_unsafe_exec(struct linux_binprm *bprm)
 {
 	struct task_struct *p = current, *t;
-	unsigned long flags;
 	unsigned n_fs;
 	int res = 0;
 
@@ -1068,21 +1067,22 @@
 
 	n_fs = 1;
 	write_lock(&p->fs->lock);
-	lock_task_sighand(p, &flags);
+	rcu_read_lock();
 	for (t = next_thread(p); t != p; t = next_thread(t)) {
 		if (t->fs == p->fs)
 			n_fs++;
 	}
+	rcu_read_unlock();
 
 	if (p->fs->users > n_fs) {
 		bprm->unsafe |= LSM_UNSAFE_SHARE;
 	} else {
-		if (p->fs->in_exec)
-			res = -EAGAIN;
-		p->fs->in_exec = 1;
+		res = -EAGAIN;
+		if (!p->fs->in_exec) {
+			p->fs->in_exec = 1;
+			res = 1;
+		}
 	}
-
-	unlock_task_sighand(p, &flags);
 	write_unlock(&p->fs->lock);
 
 	return res;
@@ -1284,6 +1284,7 @@
 	struct linux_binprm *bprm;
 	struct file *file;
 	struct files_struct *displaced;
+	bool clear_in_exec;
 	int retval;
 
 	retval = unshare_files(&displaced);
@@ -1306,8 +1307,9 @@
 		goto out_unlock;
 
 	retval = check_unsafe_exec(bprm);
-	if (retval)
+	if (retval < 0)
 		goto out_unlock;
+	clear_in_exec = retval;
 
 	file = open_exec(filename);
 	retval = PTR_ERR(file);
@@ -1355,9 +1357,7 @@
 		goto out;
 
 	/* execve succeeded */
-	write_lock(&current->fs->lock);
 	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
 	current->in_execve = 0;
 	mutex_unlock(&current->cred_exec_mutex);
 	acct_update_integrals(current);
@@ -1377,9 +1377,8 @@
 	}
 
 out_unmark:
-	write_lock(&current->fs->lock);
-	current->fs->in_exec = 0;
-	write_unlock(&current->fs->lock);
+	if (clear_in_exec)
+		current->fs->in_exec = 0;
 
 out_unlock:
 	current->in_execve = 0;
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index f983225..5c4afe6 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -1395,8 +1395,10 @@
 		blk++;
 	}
 out:
-	if (len == towrite)
+	if (len == towrite) {
+		mutex_unlock(&inode->i_mutex);
 		return err;
+	}
 	if (inode->i_size < off+len-towrite)
 		i_size_write(inode, off+len-towrite);
 	inode->i_version++;
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 6132353..e403321 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -326,11 +326,14 @@
 
 static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
 {
-	ext4_fsblk_t block = ext_pblock(ext);
+	ext4_fsblk_t block = ext_pblock(ext), valid_block;
 	int len = ext4_ext_get_actual_len(ext);
 	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
-	if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
-			((block + len) > ext4_blocks_count(es))))
+
+	valid_block = le32_to_cpu(es->s_first_data_block) +
+		EXT4_SB(inode->i_sb)->s_gdb_count;
+	if (unlikely(block <= valid_block ||
+		     ((block + len) > ext4_blocks_count(es))))
 		return 0;
 	else
 		return 1;
@@ -339,10 +342,13 @@
 static int ext4_valid_extent_idx(struct inode *inode,
 				struct ext4_extent_idx *ext_idx)
 {
-	ext4_fsblk_t block = idx_pblock(ext_idx);
+	ext4_fsblk_t block = idx_pblock(ext_idx), valid_block;
 	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
-	if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
-			(block >= ext4_blocks_count(es))))
+
+	valid_block = le32_to_cpu(es->s_first_data_block) +
+		EXT4_SB(inode->i_sb)->s_gdb_count;
+	if (unlikely(block <= valid_block ||
+		     (block >= ext4_blocks_count(es))))
 		return 0;
 	else
 		return 1;
@@ -2416,8 +2422,6 @@
 			len = ee_len;
 
 		bio = bio_alloc(GFP_NOIO, len);
-		if (!bio)
-			return -ENOMEM;
 		bio->bi_sector = ee_pblock;
 		bio->bi_bdev   = inode->i_sb->s_bdev;
 
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 47b84e8..f18e0a0 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -585,6 +585,7 @@
 fallback:
 	ngroups = sbi->s_groups_count;
 	avefreei = freei / ngroups;
+fallback_retry:
 	parent_group = EXT4_I(parent)->i_block_group;
 	for (i = 0; i < ngroups; i++) {
 		grp = (parent_group + i) % ngroups;
@@ -602,7 +603,7 @@
 		 * filesystems the above test can fail to find any blockgroups
 		 */
 		avefreei = 0;
-		goto fallback;
+		goto fallback_retry;
 	}
 
 	return -1;
@@ -831,11 +832,12 @@
 		ret2 = find_group_flex(sb, dir, &group);
 		if (ret2 == -1) {
 			ret2 = find_group_other(sb, dir, &group, mode);
-			if (ret2 == 0 && once)
+			if (ret2 == 0 && once) {
 				once = 0;
 				printk(KERN_NOTICE "ext4: find_group_flex "
 				       "failed, fallback succeeded dir %lu\n",
 				       dir->i_ino);
+			}
 		}
 		goto got_group;
 	}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index c6bd6ce..e91f978 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4357,11 +4357,9 @@
 	ei->i_flags = le32_to_cpu(raw_inode->i_flags);
 	inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
 	ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
-	if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
-	    cpu_to_le32(EXT4_OS_HURD)) {
+	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT))
 		ei->i_file_acl |=
 			((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
-	}
 	inode->i_size = ext4_isize(raw_inode);
 	ei->i_disksize = inode->i_size;
 	inode->i_generation = le32_to_cpu(raw_inode->i_generation);
@@ -4409,9 +4407,23 @@
 			(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32;
 	}
 
-	if (ei->i_flags & EXT4_EXTENTS_FL) {
-		/* Validate extent which is part of inode */
-		ret = ext4_ext_check_inode(inode);
+	ret = 0;
+	if (ei->i_file_acl &&
+	    ((ei->i_file_acl < 
+	      (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
+	       EXT4_SB(sb)->s_gdb_count)) ||
+	     (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) {
+		ext4_error(sb, __func__,
+			   "bad extended attribute block %llu in inode #%lu",
+			   ei->i_file_acl, inode->i_ino);
+		ret = -EIO;
+		goto bad_inode;
+	} else if (ei->i_flags & EXT4_EXTENTS_FL) {
+		if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+		    (S_ISLNK(inode->i_mode) &&
+		     !ext4_inode_is_fast_symlink(inode)))
+			/* Validate extent which is part of inode */
+			ret = ext4_ext_check_inode(inode);
  	} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
 		   (S_ISLNK(inode->i_mode) &&
 		    !ext4_inode_is_fast_symlink(inode))) {
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
index d0a69ff..182f9ff 100644
--- a/fs/fat/Kconfig
+++ b/fs/fat/Kconfig
@@ -95,3 +95,6 @@
 	  Note that "utf8" is not recommended for FAT filesystems.
 	  If unsure, you shouldn't set "utf8" here.
 	  See <file:Documentation/filesystems/vfat.txt> for more information.
+
+	  Enable any character sets you need in File Systems/Native Language
+	  Support.
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 1aa7026..a24c58e 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -199,7 +199,7 @@
 	return retval;
 }
 
-int get_filesystem_list(char * buf)
+int __init get_filesystem_list(char *buf)
 {
 	int len = 0;
 	struct file_system_type * tmp;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 3984e47..1afd9f2 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -597,7 +597,6 @@
 
 	GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags));
 
-	down_read(&gfs2_umount_flush_sem);
 	if (test_bit(GLF_DEMOTE, &gl->gl_flags) &&
 	    gl->gl_demote_state != gl->gl_state) {
 		if (find_first_holder(gl))
@@ -614,15 +613,14 @@
 		if (ret == 0)
 			goto out_unlock;
 		if (ret == 2)
-			goto out_sem;
+			goto out;
 		gh = find_first_waiter(gl);
 		gl->gl_target = gh->gh_state;
 		if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
 			do_error(gl, 0); /* Fail queued try locks */
 	}
 	do_xmote(gl, gh, gl->gl_target);
-out_sem:
-	up_read(&gfs2_umount_flush_sem);
+out:
 	return;
 
 out_sched:
@@ -631,7 +629,7 @@
 		gfs2_glock_put(gl);
 out_unlock:
 	clear_bit(GLF_LOCK, &gl->gl_flags);
-	goto out_sem;
+	goto out;
 }
 
 static void glock_work_func(struct work_struct *work)
@@ -641,6 +639,7 @@
 
 	if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags))
 		finish_xmote(gl, gl->gl_reply);
+	down_read(&gfs2_umount_flush_sem);
 	spin_lock(&gl->gl_spin);
 	if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
 	    gl->gl_state != LM_ST_UNLOCKED &&
@@ -653,6 +652,7 @@
 	}
 	run_queue(gl, 0);
 	spin_unlock(&gl->gl_spin);
+	up_read(&gfs2_umount_flush_sem);
 	if (!delay ||
 	    queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
 		gfs2_glock_put(gl);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index bf23a62..70f87f4 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -156,6 +156,12 @@
 	error = filemap_fdatawait(metamapping);
 	mapping_set_error(metamapping, error);
 	gfs2_ail_empty_gl(gl);
+	/*
+	 * Writeback of the data mapping may cause the dirty flag to be set
+	 * so we have to clear it again here.
+	 */
+	smp_mb__before_clear_bit();
+	clear_bit(GLF_DIRTY, &gl->gl_flags);
 }
 
 /**
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 7b277d44..5a31d42 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -137,15 +137,15 @@
 	if (S_ISREG(mode)) {
 		inode->i_op = &gfs2_file_iops;
 		if (gfs2_localflocks(sdp))
-			inode->i_fop = gfs2_file_fops_nolock;
+			inode->i_fop = &gfs2_file_fops_nolock;
 		else
-			inode->i_fop = gfs2_file_fops;
+			inode->i_fop = &gfs2_file_fops;
 	} else if (S_ISDIR(mode)) {
 		inode->i_op = &gfs2_dir_iops;
 		if (gfs2_localflocks(sdp))
-			inode->i_fop = gfs2_dir_fops_nolock;
+			inode->i_fop = &gfs2_dir_fops_nolock;
 		else
-			inode->i_fop = gfs2_dir_fops;
+			inode->i_fop = &gfs2_dir_fops;
 	} else if (S_ISLNK(mode)) {
 		inode->i_op = &gfs2_symlink_iops;
 	} else {
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index dca4fee..c30be2b 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -101,21 +101,23 @@
 extern const struct inode_operations gfs2_file_iops;
 extern const struct inode_operations gfs2_dir_iops;
 extern const struct inode_operations gfs2_symlink_iops;
-extern const struct file_operations *gfs2_file_fops_nolock;
-extern const struct file_operations *gfs2_dir_fops_nolock;
+extern const struct file_operations gfs2_file_fops_nolock;
+extern const struct file_operations gfs2_dir_fops_nolock;
 
 extern void gfs2_set_inode_flags(struct inode *inode);
  
 #ifdef CONFIG_GFS2_FS_LOCKING_DLM
-extern const struct file_operations *gfs2_file_fops;
-extern const struct file_operations *gfs2_dir_fops;
+extern const struct file_operations gfs2_file_fops;
+extern const struct file_operations gfs2_dir_fops;
+
 static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
 {
 	return sdp->sd_args.ar_localflocks;
 }
 #else /* Single node only */
-#define gfs2_file_fops NULL
-#define gfs2_dir_fops NULL
+#define gfs2_file_fops gfs2_file_fops_nolock
+#define gfs2_dir_fops gfs2_dir_fops_nolock
+
 static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
 {
 	return 1;
diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c
index 70b9b85..5d82e91 100644
--- a/fs/gfs2/ops_file.c
+++ b/fs/gfs2/ops_file.c
@@ -413,7 +413,9 @@
 	gfs2_glock_dq(&gh);
 out:
 	gfs2_holder_uninit(&gh);
-	if (ret)
+	if (ret == -ENOMEM)
+		ret = VM_FAULT_OOM;
+	else if (ret)
 		ret = VM_FAULT_SIGBUS;
 	return ret;
 }
@@ -705,7 +707,7 @@
 	}
 }
 
-const struct file_operations *gfs2_file_fops = &(const struct file_operations){
+const struct file_operations gfs2_file_fops = {
 	.llseek		= gfs2_llseek,
 	.read		= do_sync_read,
 	.aio_read	= generic_file_aio_read,
@@ -723,7 +725,7 @@
 	.setlease	= gfs2_setlease,
 };
 
-const struct file_operations *gfs2_dir_fops = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops = {
 	.readdir	= gfs2_readdir,
 	.unlocked_ioctl	= gfs2_ioctl,
 	.open		= gfs2_open,
@@ -735,7 +737,7 @@
 
 #endif /* CONFIG_GFS2_FS_LOCKING_DLM */
 
-const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_file_fops_nolock = {
 	.llseek		= gfs2_llseek,
 	.read		= do_sync_read,
 	.aio_read	= generic_file_aio_read,
@@ -751,7 +753,7 @@
 	.setlease	= generic_setlease,
 };
 
-const struct file_operations *gfs2_dir_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops_nolock = {
 	.readdir	= gfs2_readdir,
 	.unlocked_ioctl	= gfs2_ioctl,
 	.open		= gfs2_open,
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 51883b3..650a730 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -272,11 +272,6 @@
 	lock_page(page);
 
 	bio = bio_alloc(GFP_NOFS, 1);
-	if (unlikely(!bio)) {
-		__free_page(page);
-		return -ENOBUFS;
-	}
-
 	bio->bi_sector = sector * (sb->s_blocksize >> 9);
 	bio->bi_bdev = sb->s_bdev;
 	bio_add_page(bio, page, PAGE_SIZE, 0);
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index abd5429..1c70fa5 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -371,6 +371,7 @@
 	ip = ghs[1].gh_gl->gl_object;
 
 	ip->i_disksize = size;
+	i_size_write(inode, size);
 
 	error = gfs2_meta_inode_buffer(ip, &dibh);
 
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 8d53f66..152e6c4 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -81,7 +81,7 @@
 
 static LIST_HEAD(qd_lru_list);
 static atomic_t qd_lru_count = ATOMIC_INIT(0);
-static spinlock_t qd_lru_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(qd_lru_lock);
 
 int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
 {
@@ -1364,7 +1364,7 @@
 			refrigerator();
 		t = min(quotad_timeo, statfs_timeo);
 
-		prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_UNINTERRUPTIBLE);
+		prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_INTERRUPTIBLE);
 		spin_lock(&sdp->sd_trunc_lock);
 		empty = list_empty(&sdp->sd_trunc_list);
 		spin_unlock(&sdp->sd_trunc_lock);
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index f03d024..5650382 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -212,8 +212,7 @@
 	if (tmp == 0)
 		return BFITNOENT;
 	ptr--;
-	bit = fls64(tmp);
-	bit--;		/* fls64 always adds one to the bit count */
+	bit = __ffs64(tmp);
 	bit /= 2;	/* two bits per entry in the bitmap */
 	return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit;
 }
@@ -1445,10 +1444,12 @@
 u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+	struct buffer_head *dibh;
 	struct gfs2_alloc *al = ip->i_alloc;
 	struct gfs2_rgrpd *rgd = al->al_rgd;
 	u32 goal, blk;
 	u64 block;
+	int error;
 
 	if (rgrp_contains_block(rgd, ip->i_goal))
 		goal = ip->i_goal - rgd->rd_data0;
@@ -1461,7 +1462,13 @@
 	rgd->rd_last_alloc = blk;
 	block = rgd->rd_data0 + blk;
 	ip->i_goal = block;
-
+	error = gfs2_meta_inode_buffer(ip, &dibh);
+	if (error == 0) {
+		struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
+		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+		di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal);
+		brelse(dibh);
+	}
 	gfs2_assert_withdraw(sdp, rgd->rd_free >= *n);
 	rgd->rd_free -= *n;
 
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 23a3c76..153d968 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -26,7 +26,6 @@
 #include <linux/pagevec.h>
 #include <linux/parser.h>
 #include <linux/mman.h>
-#include <linux/quotaops.h>
 #include <linux/slab.h>
 #include <linux/dnotify.h>
 #include <linux/statfs.h>
@@ -842,7 +841,7 @@
 bad_val:
  	printk(KERN_ERR "hugetlbfs: Bad value '%s' for mount option '%s'\n",
 	       args[0].from, p);
- 	return 1;
+ 	return -EINVAL;
 }
 
 static int
diff --git a/fs/inode.c b/fs/inode.c
index d06d6d2..6ad14a1 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1470,42 +1470,6 @@
 	spin_lock(&inode_lock);
 }
 
-/*
- * We rarely want to lock two inodes that do not have a parent/child
- * relationship (such as directory, child inode) simultaneously. The
- * vast majority of file systems should be able to get along fine
- * without this. Do not use these functions except as a last resort.
- */
-void inode_double_lock(struct inode *inode1, struct inode *inode2)
-{
-	if (inode1 == NULL || inode2 == NULL || inode1 == inode2) {
-		if (inode1)
-			mutex_lock(&inode1->i_mutex);
-		else if (inode2)
-			mutex_lock(&inode2->i_mutex);
-		return;
-	}
-
-	if (inode1 < inode2) {
-		mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT);
-		mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD);
-	} else {
-		mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT);
-		mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD);
-	}
-}
-EXPORT_SYMBOL(inode_double_lock);
-
-void inode_double_unlock(struct inode *inode1, struct inode *inode2)
-{
-	if (inode1)
-		mutex_unlock(&inode1->i_mutex);
-
-	if (inode2 && inode2 != inode1)
-		mutex_unlock(&inode2->i_mutex);
-}
-EXPORT_SYMBOL(inode_double_unlock);
-
 static __initdata unsigned long ihash_entries;
 static int __init set_ihash_entries(char *str)
 {
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index a8e8513..06560c5 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -502,7 +502,7 @@
 		err = 0;
 	}
 
-	journal_write_revoke_records(journal, commit_transaction);
+	journal_write_revoke_records(journal, commit_transaction, write_op);
 
 	/*
 	 * If we found any dirty or locked buffers, then we should have
diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c
index 3e9afc2..da6cd9b 100644
--- a/fs/jbd/revoke.c
+++ b/fs/jbd/revoke.c
@@ -86,6 +86,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/init.h>
+#include <linux/bio.h>
 #endif
 #include <linux/log2.h>
 
@@ -118,8 +119,8 @@
 #ifdef __KERNEL__
 static void write_one_revoke_record(journal_t *, transaction_t *,
 				    struct journal_head **, int *,
-				    struct jbd_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+				    struct jbd_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
 #endif
 
 /* Utility functions to maintain the revoke table */
@@ -500,7 +501,7 @@
  * revoke hash, deleting the entries as we go.
  */
 void journal_write_revoke_records(journal_t *journal,
-				  transaction_t *transaction)
+				  transaction_t *transaction, int write_op)
 {
 	struct journal_head *descriptor;
 	struct jbd_revoke_record_s *record;
@@ -524,14 +525,14 @@
 				hash_list->next;
 			write_one_revoke_record(journal, transaction,
 						&descriptor, &offset,
-						record);
+						record, write_op);
 			count++;
 			list_del(&record->hash);
 			kmem_cache_free(revoke_record_cache, record);
 		}
 	}
 	if (descriptor)
-		flush_descriptor(journal, descriptor, offset);
+		flush_descriptor(journal, descriptor, offset, write_op);
 	jbd_debug(1, "Wrote %d revoke records\n", count);
 }
 
@@ -544,7 +545,8 @@
 				    transaction_t *transaction,
 				    struct journal_head **descriptorp,
 				    int *offsetp,
-				    struct jbd_revoke_record_s *record)
+				    struct jbd_revoke_record_s *record,
+				    int write_op)
 {
 	struct journal_head *descriptor;
 	int offset;
@@ -563,7 +565,7 @@
 	/* Make sure we have a descriptor with space left for the record */
 	if (descriptor) {
 		if (offset == journal->j_blocksize) {
-			flush_descriptor(journal, descriptor, offset);
+			flush_descriptor(journal, descriptor, offset, write_op);
 			descriptor = NULL;
 		}
 	}
@@ -600,7 +602,7 @@
 
 static void flush_descriptor(journal_t *journal,
 			     struct journal_head *descriptor,
-			     int offset)
+			     int offset, int write_op)
 {
 	journal_revoke_header_t *header;
 	struct buffer_head *bh = jh2bh(descriptor);
@@ -615,7 +617,7 @@
 	set_buffer_jwrite(bh);
 	BUFFER_TRACE(bh, "write");
 	set_buffer_dirty(bh);
-	ll_rw_block(SWRITE, 1, &bh);
+	ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
 }
 #endif
 
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 073c8c3..0b7d3b8 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -506,7 +506,8 @@
 	if (err)
 		jbd2_journal_abort(journal, err);
 
-	jbd2_journal_write_revoke_records(journal, commit_transaction);
+	jbd2_journal_write_revoke_records(journal, commit_transaction,
+					  write_op);
 
 	jbd_debug(3, "JBD: commit phase 2\n");
 
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
index bbe6d59..a360b06 100644
--- a/fs/jbd2/revoke.c
+++ b/fs/jbd2/revoke.c
@@ -86,6 +86,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/init.h>
+#include <linux/bio.h>
 #endif
 #include <linux/log2.h>
 
@@ -118,8 +119,8 @@
 #ifdef __KERNEL__
 static void write_one_revoke_record(journal_t *, transaction_t *,
 				    struct journal_head **, int *,
-				    struct jbd2_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+				    struct jbd2_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
 #endif
 
 /* Utility functions to maintain the revoke table */
@@ -499,7 +500,8 @@
  * revoke hash, deleting the entries as we go.
  */
 void jbd2_journal_write_revoke_records(journal_t *journal,
-				  transaction_t *transaction)
+				       transaction_t *transaction,
+				       int write_op)
 {
 	struct journal_head *descriptor;
 	struct jbd2_revoke_record_s *record;
@@ -523,14 +525,14 @@
 				hash_list->next;
 			write_one_revoke_record(journal, transaction,
 						&descriptor, &offset,
-						record);
+						record, write_op);
 			count++;
 			list_del(&record->hash);
 			kmem_cache_free(jbd2_revoke_record_cache, record);
 		}
 	}
 	if (descriptor)
-		flush_descriptor(journal, descriptor, offset);
+		flush_descriptor(journal, descriptor, offset, write_op);
 	jbd_debug(1, "Wrote %d revoke records\n", count);
 }
 
@@ -543,7 +545,8 @@
 				    transaction_t *transaction,
 				    struct journal_head **descriptorp,
 				    int *offsetp,
-				    struct jbd2_revoke_record_s *record)
+				    struct jbd2_revoke_record_s *record,
+				    int write_op)
 {
 	struct journal_head *descriptor;
 	int offset;
@@ -562,7 +565,7 @@
 	/* Make sure we have a descriptor with space left for the record */
 	if (descriptor) {
 		if (offset == journal->j_blocksize) {
-			flush_descriptor(journal, descriptor, offset);
+			flush_descriptor(journal, descriptor, offset, write_op);
 			descriptor = NULL;
 		}
 	}
@@ -607,7 +610,7 @@
 
 static void flush_descriptor(journal_t *journal,
 			     struct journal_head *descriptor,
-			     int offset)
+			     int offset, int write_op)
 {
 	jbd2_journal_revoke_header_t *header;
 	struct buffer_head *bh = jh2bh(descriptor);
@@ -622,7 +625,7 @@
 	set_buffer_jwrite(bh);
 	BUFFER_TRACE(bh, "write");
 	set_buffer_dirty(bh);
-	ll_rw_block(SWRITE, 1, &bh);
+	ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
 }
 #endif
 
diff --git a/fs/namei.c b/fs/namei.c
index b8433eb..78f253c 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1248,6 +1248,8 @@
 	int err;
 	struct qstr this;
 
+	WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex));
+
 	err = __lookup_one_len(name, &this, base, len);
 	if (err)
 		return ERR_PTR(err);
diff --git a/fs/namespace.c b/fs/namespace.c
index c6f54e4..4119620 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1377,7 +1377,7 @@
 	if (parent_path) {
 		detach_mnt(source_mnt, parent_path);
 		attach_mnt(source_mnt, path);
-		touch_mnt_namespace(current->nsproxy->mnt_ns);
+		touch_mnt_namespace(parent_path->mnt->mnt_ns);
 	} else {
 		mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
 		commit_tree(source_mnt);
@@ -1920,8 +1920,9 @@
 	if (data_page)
 		((char *)data_page)[PAGE_SIZE - 1] = 0;
 
-	/* Default to relatime */
-	mnt_flags |= MNT_RELATIME;
+	/* Default to relatime unless overriden */
+	if (!(flags & MS_NOATIME))
+		mnt_flags |= MNT_RELATIME;
 
 	/* Separate the per-mountpoint flags */
 	if (flags & MS_NOSUID)
diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index f54360f..fa038df 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -660,13 +660,10 @@
 			if (user.object_name_len > NCP_OBJECT_NAME_MAX_LEN)
 				return -ENOMEM;
 			if (user.object_name_len) {
-				newname = kmalloc(user.object_name_len, GFP_USER);
-				if (!newname)
-					return -ENOMEM;
-				if (copy_from_user(newname, user.object_name, user.object_name_len)) {
-					kfree(newname);
-					return -EFAULT;
-				}
+				newname = memdup_user(user.object_name,
+						      user.object_name_len);
+				if (IS_ERR(newname))
+					return PTR_ERR(newname);
 			} else {
 				newname = NULL;
 			}
@@ -760,13 +757,9 @@
 			if (user.len > NCP_PRIVATE_DATA_MAX_LEN)
 				return -ENOMEM;
 			if (user.len) {
-				new = kmalloc(user.len, GFP_USER);
-				if (!new)
-					return -ENOMEM;
-				if (copy_from_user(new, user.data, user.len)) {
-					kfree(new);
-					return -EFAULT;
-				}
+				new = memdup_user(user.data, user.len);
+				if (IS_ERR(new))
+					return PTR_ERR(new);
 			} else {
 				new = NULL;
 			}
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index e6a1932..35869a4 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -713,7 +713,8 @@
 	if (args->npages != 0)
 		xdr_encode_pages(buf, args->pages, 0, args->len);
 	else
-		req->rq_slen += args->len;
+		req->rq_slen = xdr_adjust_iovec(req->rq_svec,
+				p + XDR_QUADLEN(args->len));
 
 	err = nfsacl_encode(buf, base, args->inode,
 			    (args->mask & NFS_ACL) ?
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index 3444c00..5275097 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -229,21 +229,23 @@
 		goto out;
 	status = vfs_readdir(filp, nfsd4_build_namelist, &names);
 	fput(filp);
+	mutex_lock(&dir->d_inode->i_mutex);
 	while (!list_empty(&names)) {
 		entry = list_entry(names.next, struct name_list, list);
 
 		dentry = lookup_one_len(entry->name, dir, HEXDIR_LEN-1);
 		if (IS_ERR(dentry)) {
 			status = PTR_ERR(dentry);
-			goto out;
+			break;
 		}
 		status = f(dir, dentry);
 		dput(dentry);
 		if (status)
-			goto out;
+			break;
 		list_del(&entry->list);
 		kfree(entry);
 	}
+	mutex_unlock(&dir->d_inode->i_mutex);
 out:
 	while (!list_empty(&names)) {
 		entry = list_entry(names.next, struct name_list, list);
@@ -255,36 +257,6 @@
 }
 
 static int
-nfsd4_remove_clid_file(struct dentry *dir, struct dentry *dentry)
-{
-	int status;
-
-	if (!S_ISREG(dir->d_inode->i_mode)) {
-		printk("nfsd4: non-file found in client recovery directory\n");
-		return -EINVAL;
-	}
-	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
-	status = vfs_unlink(dir->d_inode, dentry);
-	mutex_unlock(&dir->d_inode->i_mutex);
-	return status;
-}
-
-static int
-nfsd4_clear_clid_dir(struct dentry *dir, struct dentry *dentry)
-{
-	int status;
-
-	/* For now this directory should already be empty, but we empty it of
-	 * any regular files anyway, just in case the directory was created by
-	 * a kernel from the future.... */
-	nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
-	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
-	status = vfs_rmdir(dir->d_inode, dentry);
-	mutex_unlock(&dir->d_inode->i_mutex);
-	return status;
-}
-
-static int
 nfsd4_unlink_clid_dir(char *name, int namlen)
 {
 	struct dentry *dentry;
@@ -294,18 +266,18 @@
 
 	mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
 	dentry = lookup_one_len(name, rec_dir.dentry, namlen);
-	mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
 	if (IS_ERR(dentry)) {
 		status = PTR_ERR(dentry);
-		return status;
+		goto out_unlock;
 	}
 	status = -ENOENT;
 	if (!dentry->d_inode)
 		goto out;
-
-	status = nfsd4_clear_clid_dir(rec_dir.dentry, dentry);
+	status = vfs_rmdir(rec_dir.dentry->d_inode, dentry);
 out:
 	dput(dentry);
+out_unlock:
+	mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
 	return status;
 }
 
@@ -348,7 +320,7 @@
 	if (nfs4_has_reclaimed_state(child->d_name.name, false))
 		return 0;
 
-	status = nfsd4_clear_clid_dir(parent, child);
+	status = vfs_rmdir(parent->d_inode, child);
 	if (status)
 		printk("failed to remove client recovery directory %s\n",
 				child->d_name.name);
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index ab93fcf..6c68ffd 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -116,10 +116,15 @@
 	}
 	if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) {
 		/* successfully crossed mount point */
-		exp_put(exp);
-		*expp = exp2;
+		/*
+		 * This is subtle: dentry is *not* under mnt at this point.
+		 * The only reason we are safe is that original mnt is pinned
+		 * down by exp, so we should dput before putting exp.
+		 */
 		dput(dentry);
 		*dpp = mounts;
+		exp_put(exp);
+		*expp = exp2;
 	} else {
 		exp_put(exp2);
 		dput(mounts);
@@ -1885,8 +1890,8 @@
 	return 0;
 }
 
-static int nfsd_buffered_readdir(struct file *file, filldir_t func,
-				 struct readdir_cd *cdp, loff_t *offsetp)
+static __be32 nfsd_buffered_readdir(struct file *file, filldir_t func,
+				    struct readdir_cd *cdp, loff_t *offsetp)
 {
 	struct readdir_data buf;
 	struct buffered_dirent *de;
@@ -1896,11 +1901,12 @@
 
 	buf.dirent = (void *)__get_free_page(GFP_KERNEL);
 	if (!buf.dirent)
-		return -ENOMEM;
+		return nfserrno(-ENOMEM);
 
 	offset = *offsetp;
 
 	while (1) {
+		struct inode *dir_inode = file->f_path.dentry->d_inode;
 		unsigned int reclen;
 
 		cdp->err = nfserr_eof; /* will be cleared on successful read */
@@ -1919,26 +1925,38 @@
 		if (!size)
 			break;
 
+		/*
+		 * Various filldir functions may end up calling back into
+		 * lookup_one_len() and the file system's ->lookup() method.
+		 * These expect i_mutex to be held, as it would within readdir.
+		 */
+		host_err = mutex_lock_killable(&dir_inode->i_mutex);
+		if (host_err)
+			break;
+
 		de = (struct buffered_dirent *)buf.dirent;
 		while (size > 0) {
 			offset = de->offset;
 
 			if (func(cdp, de->name, de->namlen, de->offset,
 				 de->ino, de->d_type))
-				goto done;
+				break;
 
 			if (cdp->err != nfs_ok)
-				goto done;
+				break;
 
 			reclen = ALIGN(sizeof(*de) + de->namlen,
 				       sizeof(u64));
 			size -= reclen;
 			de = (struct buffered_dirent *)((char *)de + reclen);
 		}
+		mutex_unlock(&dir_inode->i_mutex);
+		if (size > 0) /* We bailed out early */
+			break;
+
 		offset = vfs_llseek(file, 0, SEEK_CUR);
 	}
 
- done:
 	free_page((unsigned long)(buf.dirent));
 
 	if (host_err)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 8672b95..c2a87c8 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1912,6 +1912,22 @@
 	return written ? written : ret;
 }
 
+static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
+				struct file *out,
+				struct splice_desc *sd)
+{
+	int ret;
+
+	ret = ocfs2_prepare_inode_for_write(out->f_path.dentry,	&sd->pos,
+					    sd->total_len, 0, NULL);
+	if (ret < 0) {
+		mlog_errno(ret);
+		return ret;
+	}
+
+	return splice_from_pipe_feed(pipe, sd, pipe_to_file);
+}
+
 static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
 				       struct file *out,
 				       loff_t *ppos,
@@ -1919,38 +1935,76 @@
 				       unsigned int flags)
 {
 	int ret;
-	struct inode *inode = out->f_path.dentry->d_inode;
+	struct address_space *mapping = out->f_mapping;
+	struct inode *inode = mapping->host;
+	struct splice_desc sd = {
+		.total_len = len,
+		.flags = flags,
+		.pos = *ppos,
+		.u.file = out,
+	};
 
 	mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
 		   (unsigned int)len,
 		   out->f_path.dentry->d_name.len,
 		   out->f_path.dentry->d_name.name);
 
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
-
-	ret = ocfs2_rw_lock(inode, 1);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out;
-	}
-
-	ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0,
-					    NULL);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out_unlock;
-	}
-
 	if (pipe->inode)
-		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
-	ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags);
+		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
+
+	splice_from_pipe_begin(&sd);
+	do {
+		ret = splice_from_pipe_next(pipe, &sd);
+		if (ret <= 0)
+			break;
+
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+		ret = ocfs2_rw_lock(inode, 1);
+		if (ret < 0)
+			mlog_errno(ret);
+		else {
+			ret = ocfs2_splice_to_file(pipe, out, &sd);
+			ocfs2_rw_unlock(inode, 1);
+		}
+		mutex_unlock(&inode->i_mutex);
+	} while (ret > 0);
+	splice_from_pipe_end(pipe, &sd);
+
 	if (pipe->inode)
 		mutex_unlock(&pipe->inode->i_mutex);
 
-out_unlock:
-	ocfs2_rw_unlock(inode, 1);
-out:
-	mutex_unlock(&inode->i_mutex);
+	if (sd.num_spliced)
+		ret = sd.num_spliced;
+
+	if (ret > 0) {
+		unsigned long nr_pages;
+
+		*ppos += ret;
+		nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+		/*
+		 * If file or inode is SYNC and we actually wrote some data,
+		 * sync it.
+		 */
+		if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
+			int err;
+
+			mutex_lock(&inode->i_mutex);
+			err = ocfs2_rw_lock(inode, 1);
+			if (err < 0) {
+				mlog_errno(err);
+			} else {
+				err = generic_osync_inode(inode, mapping,
+						  OSYNC_METADATA|OSYNC_DATA);
+				ocfs2_rw_unlock(inode, 1);
+			}
+			mutex_unlock(&inode->i_mutex);
+
+			if (err)
+				ret = err;
+		}
+		balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
+	}
 
 	mlog_exit(ret);
 	return ret;
diff --git a/fs/pipe.c b/fs/pipe.c
index 4af7aa5..13414ec 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -37,6 +37,42 @@
  * -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
  */
 
+static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass)
+{
+	if (pipe->inode)
+		mutex_lock_nested(&pipe->inode->i_mutex, subclass);
+}
+
+void pipe_lock(struct pipe_inode_info *pipe)
+{
+	/*
+	 * pipe_lock() nests non-pipe inode locks (for writing to a file)
+	 */
+	pipe_lock_nested(pipe, I_MUTEX_PARENT);
+}
+EXPORT_SYMBOL(pipe_lock);
+
+void pipe_unlock(struct pipe_inode_info *pipe)
+{
+	if (pipe->inode)
+		mutex_unlock(&pipe->inode->i_mutex);
+}
+EXPORT_SYMBOL(pipe_unlock);
+
+void pipe_double_lock(struct pipe_inode_info *pipe1,
+		      struct pipe_inode_info *pipe2)
+{
+	BUG_ON(pipe1 == pipe2);
+
+	if (pipe1 < pipe2) {
+		pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+		pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+	} else {
+		pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+		pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+	}
+}
+
 /* Drop the inode semaphore and wait for a pipe event, atomically */
 void pipe_wait(struct pipe_inode_info *pipe)
 {
@@ -47,12 +83,10 @@
 	 * is considered a noninteractive wait:
 	 */
 	prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE);
-	if (pipe->inode)
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 	schedule();
 	finish_wait(&pipe->wait, &wait);
-	if (pipe->inode)
-		mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 }
 
 static int
diff --git a/fs/proc/base.c b/fs/proc/base.c
index f715597..aa763ab 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -648,14 +648,14 @@
 {
 	struct proc_mounts *p = file->private_data;
 	struct mnt_namespace *ns = p->ns;
-	unsigned res = 0;
+	unsigned res = POLLIN | POLLRDNORM;
 
 	poll_wait(file, &ns->poll, wait);
 
 	spin_lock(&vfsmount_lock);
 	if (p->event != ns->event) {
 		p->event = ns->event;
-		res = POLLERR;
+		res |= POLLERR | POLLPRI;
 	}
 	spin_unlock(&vfsmount_lock);
 
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index f75efa2..81e4eb6 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -18,6 +18,9 @@
 #ifndef arch_irq_stat
 #define arch_irq_stat() 0
 #endif
+#ifndef arch_idle_time
+#define arch_idle_time(cpu) 0
+#endif
 
 static int show_stat(struct seq_file *p, void *v)
 {
@@ -40,6 +43,7 @@
 		nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice);
 		system = cputime64_add(system, kstat_cpu(i).cpustat.system);
 		idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle);
+		idle = cputime64_add(idle, arch_idle_time(i));
 		iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait);
 		irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq);
 		softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
@@ -69,6 +73,7 @@
 		nice = kstat_cpu(i).cpustat.nice;
 		system = kstat_cpu(i).cpustat.system;
 		idle = kstat_cpu(i).cpustat.idle;
+		idle = cputime64_add(idle, arch_idle_time(i));
 		iowait = kstat_cpu(i).cpustat.iowait;
 		irq = kstat_cpu(i).cpustat.irq;
 		softirq = kstat_cpu(i).cpustat.softirq;
diff --git a/fs/quota/Makefile b/fs/quota/Makefile
index 385a083..68d4f6d 100644
--- a/fs/quota/Makefile
+++ b/fs/quota/Makefile
@@ -1,12 +1,3 @@
-#
-# Makefile for the Linux filesystems.
-#
-# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-y :=
-
 obj-$(CONFIG_QUOTA)		+= dquot.o
 obj-$(CONFIG_QFMT_V1)		+= quota_v1.o
 obj-$(CONFIG_QFMT_V2)		+= quota_v2.o
diff --git a/fs/romfs/internal.h b/fs/romfs/internal.h
index 06044a9..95217b8 100644
--- a/fs/romfs/internal.h
+++ b/fs/romfs/internal.h
@@ -43,5 +43,5 @@
 			  void *buf, size_t buflen);
 extern ssize_t romfs_dev_strnlen(struct super_block *sb,
 				 unsigned long pos, size_t maxlen);
-extern int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
-			     const char *str, size_t size);
+extern int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+			    const char *str, size_t size);
diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c
index 7e3e1e1..b3208ad 100644
--- a/fs/romfs/storage.c
+++ b/fs/romfs/storage.c
@@ -67,26 +67,35 @@
  * compare a string to one in a romfs image on MTD
  * - return 1 if matched, 0 if differ, -ve if error
  */
-static int romfs_mtd_strncmp(struct super_block *sb, unsigned long pos,
-			     const char *str, size_t size)
+static int romfs_mtd_strcmp(struct super_block *sb, unsigned long pos,
+			    const char *str, size_t size)
 {
-	u_char buf[16];
+	u_char buf[17];
 	size_t len, segment;
 	int ret;
 
-	/* scan the string up to 16 bytes at a time */
+	/* scan the string up to 16 bytes at a time, and attempt to grab the
+	 * trailing NUL whilst we're at it */
+	buf[0] = 0xff;
+
 	while (size > 0) {
-		segment = min_t(size_t, size, 16);
+		segment = min_t(size_t, size + 1, 17);
 		ret = ROMFS_MTD_READ(sb, pos, segment, &len, buf);
 		if (ret < 0)
 			return ret;
+		len--;
 		if (memcmp(buf, str, len) != 0)
 			return 0;
+		buf[0] = buf[len];
 		size -= len;
 		pos += len;
 		str += len;
 	}
 
+	/* check the trailing NUL was */
+	if (buf[0])
+		return 0;
+
 	return 1;
 }
 #endif /* CONFIG_ROMFS_ON_MTD */
@@ -111,6 +120,7 @@
 			return -EIO;
 		memcpy(buf, bh->b_data + offset, segment);
 		brelse(bh);
+		buf += segment;
 		buflen -= segment;
 		pos += segment;
 	}
@@ -154,28 +164,48 @@
  * compare a string to one in a romfs image on a block device
  * - return 1 if matched, 0 if differ, -ve if error
  */
-static int romfs_blk_strncmp(struct super_block *sb, unsigned long pos,
-			     const char *str, size_t size)
+static int romfs_blk_strcmp(struct super_block *sb, unsigned long pos,
+			    const char *str, size_t size)
 {
 	struct buffer_head *bh;
 	unsigned long offset;
 	size_t segment;
-	bool x;
+	bool matched, terminated = false;
 
-	/* scan the string up to 16 bytes at a time */
+	/* compare string up to a block at a time */
 	while (size > 0) {
 		offset = pos & (ROMBSIZE - 1);
 		segment = min_t(size_t, size, ROMBSIZE - offset);
 		bh = sb_bread(sb, pos >> ROMBSBITS);
 		if (!bh)
 			return -EIO;
-		x = (memcmp(bh->b_data + offset, str, segment) != 0);
-		brelse(bh);
-		if (x)
-			return 0;
+		matched = (memcmp(bh->b_data + offset, str, segment) == 0);
+
 		size -= segment;
 		pos += segment;
 		str += segment;
+		if (matched && size == 0 && offset + segment < ROMBSIZE) {
+			if (!bh->b_data[offset + segment])
+				terminated = true;
+			else
+				matched = false;
+		}
+		brelse(bh);
+		if (!matched)
+			return 0;
+	}
+
+	if (!terminated) {
+		/* the terminating NUL must be on the first byte of the next
+		 * block */
+		BUG_ON((pos & (ROMBSIZE - 1)) != 0);
+		bh = sb_bread(sb, pos >> ROMBSBITS);
+		if (!bh)
+			return -EIO;
+		matched = !bh->b_data[0];
+		brelse(bh);
+		if (!matched)
+			return 0;
 	}
 
 	return 1;
@@ -234,10 +264,12 @@
 
 /*
  * compare a string to one in romfs
+ * - the string to be compared to, str, may not be NUL-terminated; instead the
+ *   string is of the specified size
  * - return 1 if matched, 0 if differ, -ve if error
  */
-int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
-		      const char *str, size_t size)
+int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+		     const char *str, size_t size)
 {
 	size_t limit;
 
@@ -246,16 +278,16 @@
 		return -EIO;
 	if (size > ROMFS_MAXFN)
 		return -ENAMETOOLONG;
-	if (size > limit - pos)
+	if (size + 1 > limit - pos)
 		return -EIO;
 
 #ifdef CONFIG_ROMFS_ON_MTD
 	if (sb->s_mtd)
-		return romfs_mtd_strncmp(sb, pos, str, size);
+		return romfs_mtd_strcmp(sb, pos, str, size);
 #endif
 #ifdef CONFIG_ROMFS_ON_BLOCK
 	if (sb->s_bdev)
-		return romfs_blk_strncmp(sb, pos, str, size);
+		return romfs_blk_strcmp(sb, pos, str, size);
 #endif
 	return -EIO;
 }
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index 10ca7d9..c53b5ef 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -240,8 +240,8 @@
 			goto error;
 
 		/* try to match the first 16 bytes of name */
-		ret = romfs_dev_strncmp(dir->i_sb, offset + ROMFH_SIZE, name,
-					len);
+		ret = romfs_dev_strcmp(dir->i_sb, offset + ROMFH_SIZE, name,
+				       len);
 		if (ret < 0)
 			goto error;
 		if (ret == 1)
diff --git a/fs/splice.c b/fs/splice.c
index c18aa7e..666953d5 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -182,8 +182,7 @@
 	do_wakeup = 0;
 	page_nr = 0;
 
-	if (pipe->inode)
-		mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	for (;;) {
 		if (!pipe->readers) {
@@ -245,15 +244,13 @@
 		pipe->waiting_writers--;
 	}
 
-	if (pipe->inode) {
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 
-		if (do_wakeup) {
-			smp_mb();
-			if (waitqueue_active(&pipe->wait))
-				wake_up_interruptible(&pipe->wait);
-			kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
-		}
+	if (do_wakeup) {
+		smp_mb();
+		if (waitqueue_active(&pipe->wait))
+			wake_up_interruptible(&pipe->wait);
+		kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 	}
 
 	while (page_nr < spd_pages)
@@ -555,8 +552,8 @@
  * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
  * a new page in the output file page cache and fill/dirty that.
  */
-static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
-			struct splice_desc *sd)
+int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+		 struct splice_desc *sd)
 {
 	struct file *file = sd->u.file;
 	struct address_space *mapping = file->f_mapping;
@@ -600,6 +597,149 @@
 out:
 	return ret;
 }
+EXPORT_SYMBOL(pipe_to_file);
+
+static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
+{
+	smp_mb();
+	if (waitqueue_active(&pipe->wait))
+		wake_up_interruptible(&pipe->wait);
+	kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
+}
+
+/**
+ * splice_from_pipe_feed - feed available data from a pipe to a file
+ * @pipe:	pipe to splice from
+ * @sd:		information to @actor
+ * @actor:	handler that splices the data
+ *
+ * Description:
+ *    This function loops over the pipe and calls @actor to do the
+ *    actual moving of a single struct pipe_buffer to the desired
+ *    destination.  It returns when there's no more buffers left in
+ *    the pipe or if the requested number of bytes (@sd->total_len)
+ *    have been copied.  It returns a positive number (one) if the
+ *    pipe needs to be filled with more data, zero if the required
+ *    number of bytes have been copied and -errno on error.
+ *
+ *    This, together with splice_from_pipe_{begin,end,next}, may be
+ *    used to implement the functionality of __splice_from_pipe() when
+ *    locking is required around copying the pipe buffers to the
+ *    destination.
+ */
+int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
+			  splice_actor *actor)
+{
+	int ret;
+
+	while (pipe->nrbufs) {
+		struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
+		const struct pipe_buf_operations *ops = buf->ops;
+
+		sd->len = buf->len;
+		if (sd->len > sd->total_len)
+			sd->len = sd->total_len;
+
+		ret = actor(pipe, buf, sd);
+		if (ret <= 0) {
+			if (ret == -ENODATA)
+				ret = 0;
+			return ret;
+		}
+		buf->offset += ret;
+		buf->len -= ret;
+
+		sd->num_spliced += ret;
+		sd->len -= ret;
+		sd->pos += ret;
+		sd->total_len -= ret;
+
+		if (!buf->len) {
+			buf->ops = NULL;
+			ops->release(pipe, buf);
+			pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
+			pipe->nrbufs--;
+			if (pipe->inode)
+				sd->need_wakeup = true;
+		}
+
+		if (!sd->total_len)
+			return 0;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_feed);
+
+/**
+ * splice_from_pipe_next - wait for some data to splice from
+ * @pipe:	pipe to splice from
+ * @sd:		information about the splice operation
+ *
+ * Description:
+ *    This function will wait for some data and return a positive
+ *    value (one) if pipe buffers are available.  It will return zero
+ *    or -errno if no more data needs to be spliced.
+ */
+int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+	while (!pipe->nrbufs) {
+		if (!pipe->writers)
+			return 0;
+
+		if (!pipe->waiting_writers && sd->num_spliced)
+			return 0;
+
+		if (sd->flags & SPLICE_F_NONBLOCK)
+			return -EAGAIN;
+
+		if (signal_pending(current))
+			return -ERESTARTSYS;
+
+		if (sd->need_wakeup) {
+			wakeup_pipe_writers(pipe);
+			sd->need_wakeup = false;
+		}
+
+		pipe_wait(pipe);
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_next);
+
+/**
+ * splice_from_pipe_begin - start splicing from pipe
+ * @sd:		information about the splice operation
+ *
+ * Description:
+ *    This function should be called before a loop containing
+ *    splice_from_pipe_next() and splice_from_pipe_feed() to
+ *    initialize the necessary fields of @sd.
+ */
+void splice_from_pipe_begin(struct splice_desc *sd)
+{
+	sd->num_spliced = 0;
+	sd->need_wakeup = false;
+}
+EXPORT_SYMBOL(splice_from_pipe_begin);
+
+/**
+ * splice_from_pipe_end - finish splicing from pipe
+ * @pipe:	pipe to splice from
+ * @sd:		information about the splice operation
+ *
+ * Description:
+ *    This function will wake up pipe writers if necessary.  It should
+ *    be called after a loop containing splice_from_pipe_next() and
+ *    splice_from_pipe_feed().
+ */
+void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+	if (sd->need_wakeup)
+		wakeup_pipe_writers(pipe);
+}
+EXPORT_SYMBOL(splice_from_pipe_end);
 
 /**
  * __splice_from_pipe - splice data from a pipe to given actor
@@ -617,91 +757,17 @@
 ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
 			   splice_actor *actor)
 {
-	int ret, do_wakeup, err;
+	int ret;
 
-	ret = 0;
-	do_wakeup = 0;
+	splice_from_pipe_begin(sd);
+	do {
+		ret = splice_from_pipe_next(pipe, sd);
+		if (ret > 0)
+			ret = splice_from_pipe_feed(pipe, sd, actor);
+	} while (ret > 0);
+	splice_from_pipe_end(pipe, sd);
 
-	for (;;) {
-		if (pipe->nrbufs) {
-			struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
-			const struct pipe_buf_operations *ops = buf->ops;
-
-			sd->len = buf->len;
-			if (sd->len > sd->total_len)
-				sd->len = sd->total_len;
-
-			err = actor(pipe, buf, sd);
-			if (err <= 0) {
-				if (!ret && err != -ENODATA)
-					ret = err;
-
-				break;
-			}
-
-			ret += err;
-			buf->offset += err;
-			buf->len -= err;
-
-			sd->len -= err;
-			sd->pos += err;
-			sd->total_len -= err;
-			if (sd->len)
-				continue;
-
-			if (!buf->len) {
-				buf->ops = NULL;
-				ops->release(pipe, buf);
-				pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
-				pipe->nrbufs--;
-				if (pipe->inode)
-					do_wakeup = 1;
-			}
-
-			if (!sd->total_len)
-				break;
-		}
-
-		if (pipe->nrbufs)
-			continue;
-		if (!pipe->writers)
-			break;
-		if (!pipe->waiting_writers) {
-			if (ret)
-				break;
-		}
-
-		if (sd->flags & SPLICE_F_NONBLOCK) {
-			if (!ret)
-				ret = -EAGAIN;
-			break;
-		}
-
-		if (signal_pending(current)) {
-			if (!ret)
-				ret = -ERESTARTSYS;
-			break;
-		}
-
-		if (do_wakeup) {
-			smp_mb();
-			if (waitqueue_active(&pipe->wait))
-				wake_up_interruptible_sync(&pipe->wait);
-			kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
-			do_wakeup = 0;
-		}
-
-		pipe_wait(pipe);
-	}
-
-	if (do_wakeup) {
-		smp_mb();
-		if (waitqueue_active(&pipe->wait))
-			wake_up_interruptible(&pipe->wait);
-		kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
-	}
-
-	return ret;
+	return sd->num_spliced ? sd->num_spliced : ret;
 }
 EXPORT_SYMBOL(__splice_from_pipe);
 
@@ -715,7 +781,7 @@
  * @actor:	handler that splices the data
  *
  * Description:
- *    See __splice_from_pipe. This function locks the input and output inodes,
+ *    See __splice_from_pipe. This function locks the pipe inode,
  *    otherwise it's identical to __splice_from_pipe().
  *
  */
@@ -724,7 +790,6 @@
 			 splice_actor *actor)
 {
 	ssize_t ret;
-	struct inode *inode = out->f_mapping->host;
 	struct splice_desc sd = {
 		.total_len = len,
 		.flags = flags,
@@ -732,88 +797,14 @@
 		.u.file = out,
 	};
 
-	/*
-	 * The actor worker might be calling ->write_begin and
-	 * ->write_end. Most of the time, these expect i_mutex to
-	 * be held. Since this may result in an ABBA deadlock with
-	 * pipe->inode, we have to order lock acquiry here.
-	 *
-	 * Outer lock must be inode->i_mutex, as pipe_wait() will
-	 * release and reacquire pipe->inode->i_mutex, AND inode must
-	 * never be a pipe.
-	 */
-	WARN_ON(S_ISFIFO(inode->i_mode));
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
-	if (pipe->inode)
-		mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
+	pipe_lock(pipe);
 	ret = __splice_from_pipe(pipe, &sd, actor);
-	if (pipe->inode)
-		mutex_unlock(&pipe->inode->i_mutex);
-	mutex_unlock(&inode->i_mutex);
+	pipe_unlock(pipe);
 
 	return ret;
 }
 
 /**
- * generic_file_splice_write_nolock - generic_file_splice_write without mutexes
- * @pipe:	pipe info
- * @out:	file to write to
- * @ppos:	position in @out
- * @len:	number of bytes to splice
- * @flags:	splice modifier flags
- *
- * Description:
- *    Will either move or copy pages (determined by @flags options) from
- *    the given pipe inode to the given file. The caller is responsible
- *    for acquiring i_mutex on both inodes.
- *
- */
-ssize_t
-generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
-				 loff_t *ppos, size_t len, unsigned int flags)
-{
-	struct address_space *mapping = out->f_mapping;
-	struct inode *inode = mapping->host;
-	struct splice_desc sd = {
-		.total_len = len,
-		.flags = flags,
-		.pos = *ppos,
-		.u.file = out,
-	};
-	ssize_t ret;
-	int err;
-
-	err = file_remove_suid(out);
-	if (unlikely(err))
-		return err;
-
-	ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
-	if (ret > 0) {
-		unsigned long nr_pages;
-
-		*ppos += ret;
-		nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-
-		/*
-		 * If file or inode is SYNC and we actually wrote some data,
-		 * sync it.
-		 */
-		if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
-			err = generic_osync_inode(inode, mapping,
-						  OSYNC_METADATA|OSYNC_DATA);
-
-			if (err)
-				ret = err;
-		}
-		balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
-	}
-
-	return ret;
-}
-
-EXPORT_SYMBOL(generic_file_splice_write_nolock);
-
-/**
  * generic_file_splice_write - splice data from a pipe to a file
  * @pipe:	pipe info
  * @out:	file to write to
@@ -840,17 +831,27 @@
 	};
 	ssize_t ret;
 
-	WARN_ON(S_ISFIFO(inode->i_mode));
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
-	ret = file_remove_suid(out);
-	if (likely(!ret)) {
-		if (pipe->inode)
-			mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
-		ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
-		if (pipe->inode)
-			mutex_unlock(&pipe->inode->i_mutex);
-	}
-	mutex_unlock(&inode->i_mutex);
+	pipe_lock(pipe);
+
+	splice_from_pipe_begin(&sd);
+	do {
+		ret = splice_from_pipe_next(pipe, &sd);
+		if (ret <= 0)
+			break;
+
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+		ret = file_remove_suid(out);
+		if (!ret)
+			ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file);
+		mutex_unlock(&inode->i_mutex);
+	} while (ret > 0);
+	splice_from_pipe_end(pipe, &sd);
+
+	pipe_unlock(pipe);
+
+	if (sd.num_spliced)
+		ret = sd.num_spliced;
+
 	if (ret > 0) {
 		unsigned long nr_pages;
 
@@ -1339,8 +1340,7 @@
 	if (!pipe)
 		return -EBADF;
 
-	if (pipe->inode)
-		mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	error = ret = 0;
 	while (nr_segs) {
@@ -1395,8 +1395,7 @@
 		iov++;
 	}
 
-	if (pipe->inode)
-		mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 
 	if (!ret)
 		ret = error;
@@ -1524,7 +1523,7 @@
 		return 0;
 
 	ret = 0;
-	mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	while (!pipe->nrbufs) {
 		if (signal_pending(current)) {
@@ -1542,7 +1541,7 @@
 		pipe_wait(pipe);
 	}
 
-	mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 	return ret;
 }
 
@@ -1562,7 +1561,7 @@
 		return 0;
 
 	ret = 0;
-	mutex_lock(&pipe->inode->i_mutex);
+	pipe_lock(pipe);
 
 	while (pipe->nrbufs >= PIPE_BUFFERS) {
 		if (!pipe->readers) {
@@ -1583,7 +1582,7 @@
 		pipe->waiting_writers--;
 	}
 
-	mutex_unlock(&pipe->inode->i_mutex);
+	pipe_unlock(pipe);
 	return ret;
 }
 
@@ -1599,10 +1598,10 @@
 
 	/*
 	 * Potential ABBA deadlock, work around it by ordering lock
-	 * grabbing by inode address. Otherwise two different processes
+	 * grabbing by pipe info address. Otherwise two different processes
 	 * could deadlock (one doing tee from A -> B, the other from B -> A).
 	 */
-	inode_double_lock(ipipe->inode, opipe->inode);
+	pipe_double_lock(ipipe, opipe);
 
 	do {
 		if (!opipe->readers) {
@@ -1653,7 +1652,8 @@
 	if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
 		ret = -EAGAIN;
 
-	inode_double_unlock(ipipe->inode, opipe->inode);
+	pipe_unlock(ipipe);
+	pipe_unlock(opipe);
 
 	/*
 	 * If we put data in the output pipe, wakeup any potential readers.
diff --git a/fs/stat.c b/fs/stat.c
index 2db740a..075694e 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -55,46 +55,6 @@
 
 EXPORT_SYMBOL(vfs_getattr);
 
-int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat)
-{
-	struct path path;
-	int error;
-
-	error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path);
-	if (!error) {
-		error = vfs_getattr(path.mnt, path.dentry, stat);
-		path_put(&path);
-	}
-	return error;
-}
-
-int vfs_stat(char __user *name, struct kstat *stat)
-{
-	return vfs_stat_fd(AT_FDCWD, name, stat);
-}
-
-EXPORT_SYMBOL(vfs_stat);
-
-int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat)
-{
-	struct path path;
-	int error;
-
-	error = user_path_at(dfd, name, 0, &path);
-	if (!error) {
-		error = vfs_getattr(path.mnt, path.dentry, stat);
-		path_put(&path);
-	}
-	return error;
-}
-
-int vfs_lstat(char __user *name, struct kstat *stat)
-{
-	return vfs_lstat_fd(AT_FDCWD, name, stat);
-}
-
-EXPORT_SYMBOL(vfs_lstat);
-
 int vfs_fstat(unsigned int fd, struct kstat *stat)
 {
 	struct file *f = fget(fd);
@@ -106,9 +66,44 @@
 	}
 	return error;
 }
-
 EXPORT_SYMBOL(vfs_fstat);
 
+int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag)
+{
+	struct path path;
+	int error = -EINVAL;
+	int lookup_flags = 0;
+
+	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+		goto out;
+
+	if (!(flag & AT_SYMLINK_NOFOLLOW))
+		lookup_flags |= LOOKUP_FOLLOW;
+
+	error = user_path_at(dfd, filename, lookup_flags, &path);
+	if (error)
+		goto out;
+
+	error = vfs_getattr(path.mnt, path.dentry, stat);
+	path_put(&path);
+out:
+	return error;
+}
+EXPORT_SYMBOL(vfs_fstatat);
+
+int vfs_stat(char __user *name, struct kstat *stat)
+{
+	return vfs_fstatat(AT_FDCWD, name, stat, 0);
+}
+EXPORT_SYMBOL(vfs_stat);
+
+int vfs_lstat(char __user *name, struct kstat *stat)
+{
+	return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW);
+}
+EXPORT_SYMBOL(vfs_lstat);
+
+
 #ifdef __ARCH_WANT_OLD_STAT
 
 /*
@@ -155,23 +150,25 @@
 SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_old_stat(&stat, statbuf);
+	error = vfs_stat(filename, &stat);
+	if (error)
+		return error;
 
-	return error;
+	return cp_old_stat(&stat, statbuf);
 }
 
 SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_old_stat(&stat, statbuf);
+	error = vfs_lstat(filename, &stat);
+	if (error)
+		return error;
 
-	return error;
+	return cp_old_stat(&stat, statbuf);
 }
 
 SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
@@ -240,23 +237,23 @@
 SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+	int error = vfs_stat(filename, &stat);
 
-	if (!error)
-		error = cp_new_stat(&stat, statbuf);
-
-	return error;
+	if (error)
+		return error;
+	return cp_new_stat(&stat, statbuf);
 }
 
 SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
-	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+	int error;
 
-	if (!error)
-		error = cp_new_stat(&stat, statbuf);
+	error = vfs_lstat(filename, &stat);
+	if (error)
+		return error;
 
-	return error;
+	return cp_new_stat(&stat, statbuf);
 }
 
 #if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
@@ -264,21 +261,12 @@
 		struct stat __user *, statbuf, int, flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_new_stat(&stat, statbuf);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_new_stat(&stat, statbuf);
 }
 #endif
 
@@ -404,21 +392,12 @@
 		struct stat64 __user *, statbuf, int, flag)
 {
 	struct kstat stat;
-	int error = -EINVAL;
+	int error;
 
-	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
-		goto out;
-
-	if (flag & AT_SYMLINK_NOFOLLOW)
-		error = vfs_lstat_fd(dfd, filename, &stat);
-	else
-		error = vfs_stat_fd(dfd, filename, &stat);
-
-	if (!error)
-		error = cp_new_stat64(&stat, statbuf);
-
-out:
-	return error;
+	error = vfs_fstatat(dfd, filename, &stat, flag);
+	if (error)
+		return error;
+	return cp_new_stat64(&stat, statbuf);
 }
 #endif /* __ARCH_WANT_STAT64 */
 
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 93e0c02..9345806 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -157,14 +157,9 @@
 			count = size - offs;
 	}
 
-	temp = kmalloc(count, GFP_KERNEL);
-	if (!temp)
-		return -ENOMEM;
-
-	if (copy_from_user(temp, userbuf, count)) {
-		count = -EFAULT;
-		goto out_free;
-	}
+	temp = memdup_user(userbuf, count);
+	if (IS_ERR(temp))
+		return PTR_ERR(temp);
 
 	mutex_lock(&bb->mutex);
 
@@ -176,8 +171,6 @@
 	if (count > 0)
 		*off = offs + count;
 
-out_free:
-	kfree(temp);
 	return count;
 }
 
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 289c43a..b1606e0 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -446,11 +446,11 @@
 	if (buffer->event != atomic_read(&od->event))
 		goto trigger;
 
-	return 0;
+	return DEFAULT_POLLMASK;
 
  trigger:
 	buffer->needs_read_fill = 1;
-	return POLLERR|POLLPRI;
+	return DEFAULT_POLLMASK|POLLERR|POLLPRI;
 }
 
 void sysfs_notify_dirent(struct sysfs_dirent *sd)
@@ -667,6 +667,7 @@
 	struct work_struct	work;
 };
 
+static struct workqueue_struct *sysfs_workqueue;
 static DEFINE_MUTEX(sysfs_workq_mutex);
 static LIST_HEAD(sysfs_workq);
 static void sysfs_schedule_callback_work(struct work_struct *work)
@@ -715,11 +716,20 @@
 	mutex_lock(&sysfs_workq_mutex);
 	list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list)
 		if (ss->kobj == kobj) {
+			module_put(owner);
 			mutex_unlock(&sysfs_workq_mutex);
 			return -EAGAIN;
 		}
 	mutex_unlock(&sysfs_workq_mutex);
 
+	if (sysfs_workqueue == NULL) {
+		sysfs_workqueue = create_workqueue("sysfsd");
+		if (sysfs_workqueue == NULL) {
+			module_put(owner);
+			return -ENOMEM;
+		}
+	}
+
 	ss = kmalloc(sizeof(*ss), GFP_KERNEL);
 	if (!ss) {
 		module_put(owner);
@@ -735,7 +745,7 @@
 	mutex_lock(&sysfs_workq_mutex);
 	list_add_tail(&ss->workq_list, &sysfs_workq);
 	mutex_unlock(&sysfs_workq_mutex);
-	schedule_work(&ss->work);
+	queue_work(sysfs_workqueue, &ss->work);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sysfs_schedule_callback);
diff --git a/fs/xattr.c b/fs/xattr.c
index 197c4fc..d51b8f9 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -237,13 +237,9 @@
 	if (size) {
 		if (size > XATTR_SIZE_MAX)
 			return -E2BIG;
-		kvalue = kmalloc(size, GFP_KERNEL);
-		if (!kvalue)
-			return -ENOMEM;
-		if (copy_from_user(kvalue, value, size)) {
-			kfree(kvalue);
-			return -EFAULT;
-		}
+		kvalue = memdup_user(value, size);
+		if (IS_ERR(kvalue))
+			return PTR_ERR(kvalue);
 	}
 
 	error = vfs_setxattr(d, kname, kvalue, size, flags);
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index d0b4994..34eaab6 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -489,17 +489,12 @@
 	if (len > XATTR_SIZE_MAX)
 		return EINVAL;
 
-	kbuf = kmalloc(len, GFP_KERNEL);
-	if (!kbuf)
-		return ENOMEM;
-
-	if (copy_from_user(kbuf, ubuf, len))
-		goto out_kfree;
+	kbuf = memdup_user(ubuf, len);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
 
 	error = xfs_attr_set(XFS_I(inode), name, kbuf, len, flags);
 
- out_kfree:
-	kfree(kbuf);
 	return error;
 }
 
@@ -540,20 +535,16 @@
 	if (!size || size > 16 * PAGE_SIZE)
 		goto out_dput;
 
-	error = ENOMEM;
-	ops = kmalloc(size, GFP_KERNEL);
-	if (!ops)
+	ops = memdup_user(am_hreq.ops, size);
+	if (IS_ERR(ops)) {
+		error = PTR_ERR(ops);
 		goto out_dput;
-
-	error = EFAULT;
-	if (copy_from_user(ops, am_hreq.ops, size))
-		goto out_kfree_ops;
+	}
 
 	attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
 	if (!attr_name)
 		goto out_kfree_ops;
 
-
 	error = 0;
 	for (i = 0; i < am_hreq.opcount; i++) {
 		ops[i].am_error = strncpy_from_user(attr_name,
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index c70c4e3..0882d16 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -427,20 +427,16 @@
 	if (!size || size > 16 * PAGE_SIZE)
 		goto out_dput;
 
-	error = ENOMEM;
-	ops = kmalloc(size, GFP_KERNEL);
-	if (!ops)
+	ops = memdup_user(compat_ptr(am_hreq.ops), size);
+	if (IS_ERR(ops)) {
+		error = PTR_ERR(ops);
 		goto out_dput;
-
-	error = EFAULT;
-	if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
-		goto out_kfree_ops;
+	}
 
 	attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
 	if (!attr_name)
 		goto out_kfree_ops;
 
-
 	error = 0;
 	for (i = 0; i < am_hreq.opcount; i++) {
 		ops[i].am_error = strncpy_from_user(attr_name,
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index b09c4fd..4927c06 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -84,7 +84,6 @@
 	struct acpi_processor_cx *state;
 	unsigned long bm_check_timestamp;
 	u32 default_state;
-	u32 bm_activity;
 	int count;
 	struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
 	int timer_broadcast_on_state;
diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore
deleted file mode 100644
index e02c15d..0000000
--- a/include/asm-arm/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-arch
-mach-types.h
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index 37b82cb..e727fe0 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -88,7 +88,7 @@
 
 #else /* !CONFIG_BUG */
 #ifndef HAVE_ARCH_BUG
-#define BUG()
+#define BUG() do {} while(0)
 #endif
 
 #ifndef HAVE_ARCH_BUG_ON
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index b0e63c6..d7d50d7 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -1,13 +1,9 @@
 #ifndef _ASM_GENERIC_PERCPU_H_
 #define _ASM_GENERIC_PERCPU_H_
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
-
-/*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
+#include <linux/percpu-defs.h>
 
 #ifdef CONFIG_SMP
 
@@ -73,11 +69,32 @@
 
 #endif	/* SMP */
 
+#ifndef PER_CPU_BASE_SECTION
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
 #ifndef PER_CPU_ATTRIBUTES
 #define PER_CPU_ATTRIBUTES
 #endif
 
-#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
-					__typeof__(type) per_cpu_var(name)
-
 #endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 7fa660f..eaa06ef 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -1,3 +1,5 @@
+#include <linux/section-names.h>
+
 #ifndef LOAD_OFFSET
 #define LOAD_OFFSET 0
 #endif
@@ -331,7 +333,7 @@
 #endif
 
 /* Section used for early init (in .S files) */
-#define HEAD_TEXT  *(.head.text)
+#define HEAD_TEXT  *(HEAD_TEXT_SECTION)
 
 /* init and exit section handling */
 #define INIT_DATA							\
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 6586cbd..88be890 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -111,6 +111,7 @@
 int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
 void acpi_irq_stats_init(void);
 extern u32 acpi_irq_handled;
+extern u32 acpi_irq_not_handled;
 
 extern struct acpi_mcfg_allocation *pci_mmcfg_config;
 extern int pci_mmcfg_config_num;
diff --git a/include/linux/bio.h b/include/linux/bio.h
index b900d2c6..7b214fd 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -132,6 +132,7 @@
  * top 4 bits of bio flags indicate the pool this bio came from
  */
 #define BIO_POOL_BITS		(4)
+#define BIO_POOL_NONE		((1UL << BIO_POOL_BITS) - 1)
 #define BIO_POOL_OFFSET		(BITS_PER_LONG - BIO_POOL_BITS)
 #define BIO_POOL_MASK		(1UL << BIO_POOL_OFFSET)
 #define BIO_POOL_IDX(bio)	((bio)->bi_flags >> BIO_POOL_OFFSET)	
@@ -504,6 +505,115 @@
 	return bio && bio->bi_io_vec != NULL;
 }
 
+/*
+ * BIO list managment for use by remapping drivers (e.g. DM or MD).
+ *
+ * A bio_list anchors a singly-linked list of bios chained through the bi_next
+ * member of the bio.  The bio_list also caches the last list member to allow
+ * fast access to the tail.
+ */
+struct bio_list {
+	struct bio *head;
+	struct bio *tail;
+};
+
+static inline int bio_list_empty(const struct bio_list *bl)
+{
+	return bl->head == NULL;
+}
+
+static inline void bio_list_init(struct bio_list *bl)
+{
+	bl->head = bl->tail = NULL;
+}
+
+#define bio_list_for_each(bio, bl) \
+	for (bio = (bl)->head; bio; bio = bio->bi_next)
+
+static inline unsigned bio_list_size(const struct bio_list *bl)
+{
+	unsigned sz = 0;
+	struct bio *bio;
+
+	bio_list_for_each(bio, bl)
+		sz++;
+
+	return sz;
+}
+
+static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
+{
+	bio->bi_next = NULL;
+
+	if (bl->tail)
+		bl->tail->bi_next = bio;
+	else
+		bl->head = bio;
+
+	bl->tail = bio;
+}
+
+static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
+{
+	bio->bi_next = bl->head;
+
+	bl->head = bio;
+
+	if (!bl->tail)
+		bl->tail = bio;
+}
+
+static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
+{
+	if (!bl2->head)
+		return;
+
+	if (bl->tail)
+		bl->tail->bi_next = bl2->head;
+	else
+		bl->head = bl2->head;
+
+	bl->tail = bl2->tail;
+}
+
+static inline void bio_list_merge_head(struct bio_list *bl,
+				       struct bio_list *bl2)
+{
+	if (!bl2->head)
+		return;
+
+	if (bl->head)
+		bl2->tail->bi_next = bl->head;
+	else
+		bl->tail = bl2->tail;
+
+	bl->head = bl2->head;
+}
+
+static inline struct bio *bio_list_pop(struct bio_list *bl)
+{
+	struct bio *bio = bl->head;
+
+	if (bio) {
+		bl->head = bl->head->bi_next;
+		if (!bl->head)
+			bl->tail = NULL;
+
+		bio->bi_next = NULL;
+	}
+
+	return bio;
+}
+
+static inline struct bio *bio_list_get(struct bio_list *bl)
+{
+	struct bio *bio = bl->head;
+
+	bl->head = bl->tail = NULL;
+
+	return bio;
+}
+
 #if defined(CONFIG_BLK_DEV_INTEGRITY)
 
 #define bip_vec_idx(bip, idx)	(&(bip->bip_vec[(idx)]))
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 6182913..c05a29c 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -112,6 +112,25 @@
 	return fls64(l);
 }
 
+/**
+ * __ffs64 - find first set bit in a 64 bit word
+ * @word: The 64 bit word
+ *
+ * On 64 bit arches this is a synomyn for __ffs
+ * The result is not defined if no bits are set, so check that @word
+ * is non-zero before calling this.
+ */
+static inline unsigned long __ffs64(u64 word)
+{
+#if BITS_PER_LONG == 32
+	if (((u32)word) == 0UL)
+		return __ffs((u32)(word >> 32)) + 32;
+#elif BITS_PER_LONG != 64
+#error BITS_PER_LONG not 32 or 64
+#endif
+	return __ffs((unsigned long)word);
+}
+
 #ifdef __KERNEL__
 #ifdef CONFIG_GENERIC_FIND_FIRST_BIT
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ba54c83..2755d5c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -118,6 +118,7 @@
 	__REQ_COPY_USER,	/* contains copies of user pages */
 	__REQ_INTEGRITY,	/* integrity metadata has been remapped */
 	__REQ_NOIDLE,		/* Don't anticipate more IO after this one */
+	__REQ_IO_STAT,		/* account I/O stat */
 	__REQ_NR_BITS,		/* stops here */
 };
 
@@ -145,6 +146,7 @@
 #define REQ_COPY_USER	(1 << __REQ_COPY_USER)
 #define REQ_INTEGRITY	(1 << __REQ_INTEGRITY)
 #define REQ_NOIDLE	(1 << __REQ_NOIDLE)
+#define REQ_IO_STAT	(1 << __REQ_IO_STAT)
 
 #define BLK_MAX_CDB	16
 
@@ -598,6 +600,7 @@
 				 blk_failfast_transport(rq) ||	\
 				 blk_failfast_driver(rq))
 #define blk_rq_started(rq)	((rq)->cmd_flags & REQ_STARTED)
+#define blk_rq_io_stat(rq)	((rq)->cmd_flags & REQ_IO_STAT)
 
 #define blk_account_rq(rq)	(blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) 
 
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 7b73bb8..16ed028 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -155,6 +155,7 @@
 			unsigned long b_state);
 void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
 void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_async_write(struct buffer_head *bh, int uptodate);
 
 /* Things to do with buffers at mapping->private_list */
 void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
@@ -197,6 +198,8 @@
 void block_invalidatepage(struct page *page, unsigned long offset);
 int block_write_full_page(struct page *page, get_block_t *get_block,
 				struct writeback_control *wbc);
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+			struct writeback_control *wbc, bh_end_io_t *handler);
 int block_read_full_page(struct page*, get_block_t*);
 int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
 				unsigned long from);
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 573819e..5a40d14 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -143,7 +143,9 @@
  *			400-499: Perfect
  *				The ideal clocksource. A must-use where
  *				available.
- * @read:		returns a cycle value
+ * @read:		returns a cycle value, passes clocksource as argument
+ * @enable:		optional function to enable the clocksource
+ * @disable:		optional function to disable the clocksource
  * @mask:		bitmask for two's complement
  *			subtraction of non 64 bit counters
  * @mult:		cycle to nanosecond multiplier (adjusted by NTP)
@@ -162,7 +164,9 @@
 	char *name;
 	struct list_head list;
 	int rating;
-	cycle_t (*read)(void);
+	cycle_t (*read)(struct clocksource *cs);
+	int (*enable)(struct clocksource *cs);
+	void (*disable)(struct clocksource *cs);
 	cycle_t mask;
 	u32 mult;
 	u32 mult_orig;
@@ -271,7 +275,34 @@
  */
 static inline cycle_t clocksource_read(struct clocksource *cs)
 {
-	return cs->read();
+	return cs->read(cs);
+}
+
+/**
+ * clocksource_enable: - enable clocksource
+ * @cs:		pointer to clocksource
+ *
+ * Enables the specified clocksource. The clocksource callback
+ * function should start up the hardware and setup mult and field
+ * members of struct clocksource to reflect hardware capabilities.
+ */
+static inline int clocksource_enable(struct clocksource *cs)
+{
+	return cs->enable ? cs->enable(cs) : 0;
+}
+
+/**
+ * clocksource_disable: - disable clocksource
+ * @cs:		pointer to clocksource
+ *
+ * Disables the specified clocksource. The clocksource callback
+ * function should power down the now unused hardware block to
+ * save power.
+ */
+static inline void clocksource_disable(struct clocksource *cs)
+{
+	if (cs->disable)
+		cs->disable(cs);
 }
 
 /**
diff --git a/include/linux/device.h b/include/linux/device.h
index 2918c0e..6a69caa 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -551,6 +551,7 @@
 extern struct device *get_device(struct device *dev);
 extern void put_device(struct device *dev);
 
+extern void wait_for_device_probe(void);
 
 /* drivers/base/power/shutdown.c */
 extern void device_shutdown(void);
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index baabf33..a0d9422 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -70,7 +70,7 @@
 		DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT };	\
 	if (__dynamic_dbg_enabled(descriptor))				\
 			dev_printk(KERN_DEBUG, dev,			\
-					KBUILD_MODNAME ": " pr_fmt(fmt),\
+					KBUILD_MODNAME ": " fmt,	\
 					##__VA_ARGS__);			\
 	} while (0)
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 562d285..5bed436 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -87,6 +87,60 @@
  */
 #define FMODE_NOCMTIME		((__force fmode_t)2048)
 
+/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ *	The block layer uses device plugging to defer IO a little bit, in
+ *	the hope that we will see more IO very shortly. This increases
+ *	coalescing of adjacent IO and thus reduces the number of IOs we
+ *	have to send to the device. It also allows for better queuing,
+ *	if the IO isn't mergeable. If the caller is going to be waiting
+ *	for the IO, then he must ensure that the device is unplugged so
+ *	that the IO is dispatched to the driver.
+ *
+ *	All IO is handled async in Linux. This is fine for background
+ *	writes, but for reads or writes that someone waits for completion
+ *	on, we want to notify the block layer and IO scheduler so that they
+ *	know about it. That allows them to make better scheduling
+ *	decisions. So when the below references 'sync' and 'async', it
+ *	is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ			A normal read operation. Device will be plugged.
+ * READ_SYNC		A synchronous read. Device is not plugged, caller can
+ *			immediately wait on this read without caring about
+ *			unplugging.
+ * READA		Used for read-ahead operations. Lower priority, and the
+ *			 block layer could (in theory) choose to ignore this
+ *			request if it runs into resource problems.
+ * WRITE		A normal async write. Device will be plugged.
+ * SWRITE		Like WRITE, but a special case for ll_rw_block() that
+ *			tells it to lock the buffer first. Normally a buffer
+ *			must be locked before doing IO.
+ * WRITE_SYNC_PLUG	Synchronous write. Identical to WRITE, but passes down
+ *			the hint that someone will be waiting on this IO
+ *			shortly. The device must still be unplugged explicitly,
+ *			WRITE_SYNC_PLUG does not do this as we could be
+ *			submitting more writes before we actually wait on any
+ *			of them.
+ * WRITE_SYNC		Like WRITE_SYNC_PLUG, but also unplugs the device
+ *			immediately after submission. The write equivalent
+ *			of READ_SYNC.
+ * WRITE_ODIRECT	Special case write for O_DIRECT only.
+ * SWRITE_SYNC
+ * SWRITE_SYNC_PLUG	Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
+ *			See SWRITE.
+ * WRITE_BARRIER	Like WRITE, but tells the block layer that all
+ *			previously submitted writes must be safely on storage
+ *			before this one is started. Also guarantees that when
+ *			this write is complete, it itself is also safely on
+ *			storage. Prevents reordering of writes on both sides
+ *			of this IO.
+ *
+ */
 #define RW_MASK		1
 #define RWA_MASK	2
 #define READ 0
@@ -102,6 +156,11 @@
 			(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
 #define SWRITE_SYNC	(SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
 #define WRITE_BARRIER	(WRITE | (1 << BIO_RW_BARRIER))
+
+/*
+ * These aren't really reads or writes, they pass down information about
+ * parts of device that are now unused by the file system.
+ */
 #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
 #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))
 
@@ -738,9 +797,6 @@
 	I_MUTEX_QUOTA
 };
 
-extern void inode_double_lock(struct inode *inode1, struct inode *inode2);
-extern void inode_double_unlock(struct inode *inode1, struct inode *inode2);
-
 /*
  * NOTE: in a 32bit arch with a preemptable kernel and
  * an UP compile the i_size_read/write must be atomic
@@ -2150,8 +2206,6 @@
 		struct pipe_inode_info *, size_t, unsigned int);
 extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
 		struct file *, loff_t *, size_t, unsigned int);
-extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *,
-		struct file *, loff_t *, size_t, unsigned int);
 extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
 		struct file *out, loff_t *, size_t len, unsigned int flags);
 extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
@@ -2245,9 +2299,8 @@
 
 extern int vfs_stat(char __user *, struct kstat *);
 extern int vfs_lstat(char __user *, struct kstat *);
-extern int vfs_stat_fd(int dfd, char __user *, struct kstat *);
-extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *);
 extern int vfs_fstat(unsigned int, struct kstat *);
+extern int vfs_fstatat(int , char __user *, struct kstat *, int);
 
 extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 		    unsigned long arg);
@@ -2395,7 +2448,7 @@
 int proc_nr_files(struct ctl_table *table, int write, struct file *filp,
 		  void __user *buffer, size_t *lenp, loff_t *ppos);
 
-int get_filesystem_list(char * buf);
+int __init get_filesystem_list(char *buf);
 
 #endif /* __KERNEL__ */
 #endif /* _LINUX_FS_H */
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index f2a78b5..244677c 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -43,10 +43,6 @@
  *
  */
 
-/* Flags related to I2C device features */
-#define FSL_I2C_DEV_SEPARATE_DFSRR	0x00000001
-#define FSL_I2C_DEV_CLOCK_5200		0x00000002
-
 enum fsl_usb2_operating_modes {
 	FSL_USB2_MPH_HOST,
 	FSL_USB2_DR_HOST,
@@ -83,6 +79,10 @@
 	u16	max_chipselect;
 	void	(*cs_control)(struct spi_device *spi, bool on);
 	u32	sysclk;
+
+	/* Legacy hooks, used by mpc52xx_psc_spi driver. */
+	void	(*activate_cs)(u8 cs, u8 polarity);
+	void	(*deactivate_cs)(u8 cs, u8 polarity);
 };
 
 struct mpc8xx_pcmcia_ops {
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 634c530..a1a28ca 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -214,6 +214,7 @@
 #define DISK_PITER_REVERSE	(1 << 0) /* iterate in the reverse direction */
 #define DISK_PITER_INCL_EMPTY	(1 << 1) /* include 0-sized parts */
 #define DISK_PITER_INCL_PART0	(1 << 2) /* include partition 0 */
+#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */
 
 struct disk_part_iter {
 	struct gendisk		*disk;
diff --git a/include/linux/init.h b/include/linux/init.h
index 68cb026..20a1334 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -2,6 +2,8 @@
 #define _LINUX_INIT_H
 
 #include <linux/compiler.h>
+#include <linux/section-names.h>
+#include <linux/stringify.h>
 
 /* These macros are used to mark some functions or 
  * initialized data (doesn't apply to uninitialized data)
@@ -107,7 +109,7 @@
 #define __memexitconst   __section(.memexit.rodata)
 
 /* For assembly routines */
-#define __HEAD		.section	".head.text","ax"
+#define __HEAD		.section	__stringify(HEAD_TEXT_SECTION),"ax"
 #define __INIT		.section	".init.text","ax"
 #define __FINIT		.previous
 
@@ -247,6 +249,7 @@
 
 /* Relies on boot_command_line being set */
 void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
 #endif /* __ASSEMBLY__ */
 
 /**
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 7ebdb4f..65aae34 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -198,6 +198,8 @@
 					      response.  When you send a
 					      response message, this will
 					      be returned. */
+#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
+
 /* Note that async events and received commands do not have a completion
    code as the first byte of the incoming data, unlike a response. */
 
diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h
index b56a158..df97e6e 100644
--- a/include/linux/ipmi_msgdefs.h
+++ b/include/linux/ipmi_msgdefs.h
@@ -58,6 +58,12 @@
 #define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
 #define IPMI_GET_CHANNEL_INFO_CMD	0x42
 
+/* Bit for BMC global enables. */
+#define IPMI_BMC_RCV_MSG_INTR     0x01
+#define IPMI_BMC_EVT_MSG_INTR     0x02
+#define IPMI_BMC_EVT_MSG_BUFF     0x04
+#define IPMI_BMC_SYS_LOG          0x08
+
 #define IPMI_NETFN_STORAGE_REQUEST		0x0a
 #define IPMI_NETFN_STORAGE_RESPONSE		0x0b
 #define IPMI_ADD_SEL_ENTRY_CMD		0x44
@@ -109,5 +115,7 @@
 #define IPMI_CHANNEL_MEDIUM_USB1	10
 #define IPMI_CHANNEL_MEDIUM_USB2	11
 #define IPMI_CHANNEL_MEDIUM_SYSINTF	12
+#define IPMI_CHANNEL_MEDIUM_OEM_MIN	0x60
+#define IPMI_CHANNEL_MEDIUM_OEM_MAX	0x7f
 
 #endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 53ae439..c2049a0 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -978,7 +978,8 @@
 extern int	   journal_revoke (handle_t *,
 				unsigned long, struct buffer_head *);
 extern int	   journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void	   journal_write_revoke_records(journal_t *, transaction_t *);
+extern void	   journal_write_revoke_records(journal_t *,
+						transaction_t *, int);
 
 /* Recovery revoke support */
 extern int	journal_set_revoke(journal_t *, unsigned long, tid_t);
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 8815a34..cc02393 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1193,7 +1193,8 @@
 extern void	   jbd2_journal_destroy_revoke(journal_t *);
 extern int	   jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
 extern int	   jbd2_journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void	   jbd2_journal_write_revoke_records(journal_t *, transaction_t *);
+extern void	   jbd2_journal_write_revoke_records(journal_t *,
+						     transaction_t *, int);
 
 /* Recovery revoke support */
 extern int	jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index d9e75ec..883cd44 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -377,6 +377,15 @@
 #define pr_cont(fmt, ...) \
 	printk(KERN_CONT fmt, ##__VA_ARGS__)
 
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
 /* If you are writing a driver, please use dev_dbg instead */
 #if defined(DEBUG)
 #define pr_debug(fmt, ...) \
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 311a073..8cc1379 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -409,6 +409,8 @@
 #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
 #define KVM_CAP_DEVICE_DEASSIGNMENT 27
 #endif
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b450a26..3d501db 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -209,6 +209,7 @@
 
 	/* bits 24:31 of ap->flags are reserved for LLD specific flags */
 
+
 	/* struct ata_port pflags */
 	ATA_PFLAG_EH_PENDING	= (1 << 0), /* EH pending */
 	ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
@@ -225,6 +226,9 @@
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
 	ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
 
+	ATA_PFLAG_PIO32		= (1 << 20),  /* 32bit PIO */
+	ATA_PFLAG_PIO32CHANGE	= (1 << 21),  /* 32bit PIO can be turned on/off */
+
 	/* struct ata_queued_cmd flags */
 	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */
 	ATA_QCFLAG_DMAMAP	= (1 << 1), /* SG table is DMA mapped */
@@ -689,7 +693,10 @@
 	struct Scsi_Host	*scsi_host; /* our co-allocated scsi host */
 	struct ata_port_operations *ops;
 	spinlock_t		*lock;
+	/* Flags owned by the EH context. Only EH should touch these once the
+	   port is active */
 	unsigned long		flags;	/* ATA_FLAG_xxx */
+	/* Flags that change dynamically, protected by ap->lock */
 	unsigned int		pflags; /* ATA_PFLAG_xxx */
 	unsigned int		print_id; /* user visible unique port ID */
 	unsigned int		port_no; /* 0 based port no. inside the host */
@@ -1595,6 +1602,7 @@
 extern void ata_sff_error_handler(struct ata_port *ap);
 extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
 extern int ata_sff_port_start(struct ata_port *ap);
+extern int ata_sff_port_start32(struct ata_port *ap);
 extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
 extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
 					   unsigned long xfer_mask);
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 18146c9..a9e3b76 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -75,7 +75,7 @@
 {
 	struct mem_cgroup *mem;
 	rcu_read_lock();
-	mem = mem_cgroup_from_task((mm)->owner);
+	mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
 	rcu_read_unlock();
 	return cgroup == mem;
 }
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
new file mode 100644
index 0000000..8f921d7
--- /dev/null
+++ b/include/linux/percpu-defs.h
@@ -0,0 +1,84 @@
+#ifndef _LINUX_PERCPU_DEFS_H
+#define _LINUX_PERCPU_DEFS_H
+
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+/*
+ * Base implementations of per-CPU variable declarations and definitions, where
+ * the section in which the variable is to be placed is provided by the
+ * 'section' argument.  This may be used to affect the parameters governing the
+ * variable's storage.
+ *
+ * NOTE!  The sections for the DECLARE and for the DEFINE must match, lest
+ * linkage errors occur due the compiler generating the wrong code to access
+ * that section.
+ */
+#define DECLARE_PER_CPU_SECTION(type, name, section)			\
+	extern								\
+	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define DEFINE_PER_CPU_SECTION(type, name, section)			\
+	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
+	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+/*
+ * Variant on the per-CPU variable declaration/definition theme used for
+ * ordinary per-CPU variables.
+ */
+#define DECLARE_PER_CPU(type, name)					\
+	DECLARE_PER_CPU_SECTION(type, name, "")
+
+#define DEFINE_PER_CPU(type, name)					\
+	DEFINE_PER_CPU_SECTION(type, name, "")
+
+/*
+ * Declaration/definition used for per-CPU variables that must come first in
+ * the set of variables.
+ */
+#define DECLARE_PER_CPU_FIRST(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+#define DEFINE_PER_CPU_FIRST(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+/*
+ * Declaration/definition used for per-CPU variables that must be cacheline
+ * aligned under SMP conditions so that, whilst a particular instance of the
+ * data corresponds to a particular CPU, inefficiencies due to direct access by
+ * other CPUs are reduced by preventing the data from unnecessarily spanning
+ * cachelines.
+ *
+ * An example of this would be statistical data, where each CPU's set of data
+ * is updated by that CPU alone, but the data from across all CPUs is collated
+ * by a CPU processing a read from a proc file.
+ */
+#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+	____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
+	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+	____cacheline_aligned_in_smp
+
+/*
+ * Declaration/definition used for per-CPU variables that must be page aligned.
+ */
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name)				\
+	DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
+	DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+/*
+ * Intermodule exports for per-CPU variables.
+ */
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+
+#endif /* _LINUX_PERCPU_DEFS_H */
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index cfda2d5..1581ff2 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -9,50 +9,6 @@
 
 #include <asm/percpu.h>
 
-#ifndef PER_CPU_BASE_SECTION
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
-#endif
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
-#endif
-
-#define DEFINE_PER_CPU_SECTION(type, name, section)			\
-	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
-	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU(type, name)					\
-	DEFINE_PER_CPU_SECTION(type, name, "")
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
-	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
-	____cacheline_aligned_in_smp
-
-#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
-
-#define DEFINE_PER_CPU_FIRST(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
 /* enough to cover all DEFINE_PER_CPUs in modules */
 #ifdef CONFIG_MODULES
 #define PERCPU_MODULE_RESERVE		(8 << 10)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 32cf14a..97e40cb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -388,6 +388,12 @@
 	/* Enables or disables interrupts */
 	int (*config_intr)(struct phy_device *phydev);
 
+	/*
+	 * Checks if the PHY generated an interrupt.
+	 * For multi-PHY devices with shared PHY interrupt pin
+	 */
+	int (*did_interrupt)(struct phy_device *phydev);
+
 	/* Clears up any memory if needed */
 	void (*remove)(struct phy_device *phydev);
 
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 8e41202..c8f0385 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -134,6 +134,11 @@
    memory allocation, whereas PIPE_BUF makes atomicity guarantees.  */
 #define PIPE_SIZE		PAGE_SIZE
 
+/* Pipe lock and unlock operations */
+void pipe_lock(struct pipe_inode_info *);
+void pipe_unlock(struct pipe_inode_info *);
+void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
+
 /* Drop the inode semaphore and wait for a pipe event, atomically */
 void pipe_wait(struct pipe_inode_info *pipe);
 
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 04b4d73..d745f5b 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -113,6 +113,7 @@
 #include <linux/cdrom.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
+#include <linux/mempool.h>
 
 /* default bio write queue congestion marks */
 #define PKT_WRITE_CONGESTION_ON    10000
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 76e470a..72736fd 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -77,4 +77,46 @@
 #define platform_get_drvdata(_dev)	dev_get_drvdata(&(_dev)->dev)
 #define platform_set_drvdata(_dev,data)	dev_set_drvdata(&(_dev)->dev, (data))
 
+/* early platform driver interface */
+struct early_platform_driver {
+	const char *class_str;
+	struct platform_driver *pdrv;
+	struct list_head list;
+	int requested_id;
+};
+
+#define EARLY_PLATFORM_ID_UNSET -2
+#define EARLY_PLATFORM_ID_ERROR -3
+
+extern int early_platform_driver_register(struct early_platform_driver *epdrv,
+					  char *buf);
+extern void early_platform_add_devices(struct platform_device **devs, int num);
+
+static inline int is_early_platform_device(struct platform_device *pdev)
+{
+	return !pdev->dev.driver;
+}
+
+extern void early_platform_driver_register_all(char *class_str);
+extern int early_platform_driver_probe(char *class_str,
+				       int nr_probe, int user_only);
+extern void early_platform_cleanup(void);
+
+
+#ifndef MODULE
+#define early_platform_init(class_string, platform_driver)		\
+static __initdata struct early_platform_driver early_driver = {		\
+	.class_str = class_string,					\
+	.pdrv = platform_driver,					\
+	.requested_id = EARLY_PLATFORM_ID_UNSET,			\
+};									\
+static int __init early_platform_driver_setup_func(char *buf)		\
+{									\
+	return early_platform_driver_register(&early_driver, buf);	\
+}									\
+early_param(class_string, early_platform_driver_setup_func)
+#else /* MODULE */
+#define early_platform_init(class_string, platform_driver)
+#endif /* MODULE */
+
 #endif /* _PLATFORM_DEVICE_H_ */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 0cdda00..58b2aa5 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -161,9 +161,8 @@
 	unsigned long offline_fqs;	/* Kicked due to being offline. */
 	unsigned long resched_ipi;	/* Sent a resched IPI. */
 
-	/* 5) state to allow this CPU to force_quiescent_state on others */
+	/* 5) For future __rcu_pending statistics. */
 	long n_rcu_pending;		/* rcu_pending() calls since boot. */
-	long n_rcu_pending_force_qs;	/* when to force quiescent states. */
 
 	int cpu;
 };
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 5621d87..6b361d2 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -193,7 +193,7 @@
 	atomic_t j_wcount;	/* count of writers for current commit */
 	unsigned long j_bcount;	/* batch count. allows turning X transactions into 1 */
 	unsigned long j_first_unflushed_offset;	/* first unflushed transactions offset */
-	unsigned long j_last_flush_trans_id;	/* last fully flushed journal timestamp */
+	unsigned j_last_flush_trans_id;	/* last fully flushed journal timestamp */
 	struct buffer_head *j_header_bh;
 
 	time_t j_trans_start_time;	/* time this transaction started */
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 262a8dc..167c333 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -21,6 +21,8 @@
 
 #else /* CONFIG_SECCOMP */
 
+#include <linux/errno.h>
+
 typedef struct { } seccomp_t;
 
 #define secure_computing(x) do { } while (0)
diff --git a/include/linux/section-names.h b/include/linux/section-names.h
new file mode 100644
index 0000000..c956f4e
--- /dev/null
+++ b/include/linux/section-names.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_SECTION_NAMES_H
+#define __LINUX_SECTION_NAMES_H
+
+#define HEAD_TEXT_SECTION .head.text
+
+#endif /* !__LINUX_SECTION_NAMES_H */
diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h
index 8595827..b65c888 100644
--- a/include/linux/slow-work.h
+++ b/include/linux/slow-work.h
@@ -67,7 +67,7 @@
 }
 
 /**
- * slow_work_init - Initialise a very slow work item
+ * vslow_work_init - Initialise a very slow work item
  * @work: The work item to initialise
  * @ops: The operations to use to handle the slow work item
  *
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 05eab2f..2ea2032 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -51,5 +51,6 @@
 				 void **filter_data);
 	int	(*filter)	(void *filter_data, int data_idx, int *val);
 	void	(*filter_cleanup)(void *filter_data);
+	void	(*wait_for_sync)(void);
 };
 
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 2cc43fa..a0faa18 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -245,7 +245,12 @@
 	 */
 	u16			dma_alignment;
 
-	/* setup mode and clock, etc (spi driver may call many times) */
+	/* Setup mode and clock, etc (spi driver may call many times).
+	 *
+	 * IMPORTANT:  this may be called when transfers to another
+	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
+	 * which could break those transfers.
+	 */
 	int			(*setup)(struct spi_device *spi);
 
 	/* bidirectional bulk transfers
diff --git a/include/linux/splice.h b/include/linux/splice.h
index 528dcb9..5f3faa9 100644
--- a/include/linux/splice.h
+++ b/include/linux/splice.h
@@ -36,6 +36,8 @@
 		void *data;		/* cookie */
 	} u;
 	loff_t pos;			/* file position */
+	size_t num_spliced;		/* number of bytes already spliced */
+	bool need_wakeup;		/* need to wake up writer */
 };
 
 struct partial_page {
@@ -66,6 +68,16 @@
 				splice_actor *);
 extern ssize_t __splice_from_pipe(struct pipe_inode_info *,
 				  struct splice_desc *, splice_actor *);
+extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *,
+				 splice_actor *);
+extern int splice_from_pipe_next(struct pipe_inode_info *,
+				 struct splice_desc *);
+extern void splice_from_pipe_begin(struct splice_desc *);
+extern void splice_from_pipe_end(struct pipe_inode_info *,
+				 struct splice_desc *);
+extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *,
+			struct splice_desc *);
+
 extern ssize_t splice_to_pipe(struct pipe_inode_info *,
 			      struct splice_pipe_desc *);
 extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 3e3a436..795032e 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -58,10 +58,17 @@
  *	by @begin().
  *	@prepare() is called right after devices have been suspended (ie. the
  *	appropriate .suspend() method has been executed for each device) and
- *	before the nonboot CPUs are disabled (it is executed with IRQs enabled).
- *	This callback is optional.  It returns 0 on success or a negative
- *	error code otherwise, in which case the system cannot enter the desired
- *	sleep state (@enter() and @finish() will not be called in that case).
+ *	before device drivers' late suspend callbacks are executed.  It returns
+ *	0 on success or a negative error code otherwise, in which case the
+ *	system cannot enter the desired sleep state (@prepare_late(), @enter(),
+ *	@wake(), and @finish() will not be called in that case).
+ *
+ * @prepare_late: Finish preparing the platform for entering the system sleep
+ *	state indicated by @begin().
+ *	@prepare_late is called before disabling nonboot CPUs and after
+ *	device drivers' late suspend callbacks have been executed.  It returns
+ *	0 on success or a negative error code otherwise, in which case the
+ *	system cannot enter the desired sleep state (@enter() and @wake()).
  *
  * @enter: Enter the system sleep state indicated by @begin() or represented by
  *	the argument if @begin() is not implemented.
@@ -69,19 +76,26 @@
  *	error code otherwise, in which case the system cannot enter the desired
  *	sleep state.
  *
- * @finish: Called when the system has just left a sleep state, right after
- *	the nonboot CPUs have been enabled and before devices are resumed (it is
- *	executed with IRQs enabled).
+ * @wake: Called when the system has just left a sleep state, right after
+ *	the nonboot CPUs have been enabled and before device drivers' early
+ *	resume callbacks are executed.
+ *	This callback is optional, but should be implemented by the platforms
+ *	that implement @prepare_late().  If implemented, it is always called
+ *	after @enter(), even if @enter() fails.
+ *
+ * @finish: Finish wake-up of the platform.
+ *	@finish is called right prior to calling device drivers' regular suspend
+ *	callbacks.
  *	This callback is optional, but should be implemented by the platforms
  *	that implement @prepare().  If implemented, it is always called after
- *	@enter() (even if @enter() fails).
+ *	@enter() and @wake(), if implemented, even if any of them fails.
  *
  * @end: Called by the PM core right after resuming devices, to indicate to
  *	the platform that the system has returned to the working state or
  *	the transition to the sleep state has been aborted.
  *	This callback is optional, but should be implemented by the platforms
- *	that implement @begin(), but platforms implementing @begin() should
- *	also provide a @end() which cleans up transitions aborted before
+ *	that implement @begin().  Accordingly, platforms implementing @begin()
+ *	should also provide a @end() which cleans up transitions aborted before
  *	@enter().
  *
  * @recover: Recover the platform from a suspend failure.
@@ -93,7 +107,9 @@
 	int (*valid)(suspend_state_t state);
 	int (*begin)(suspend_state_t state);
 	int (*prepare)(void);
+	int (*prepare_late)(void);
 	int (*enter)(suspend_state_t state);
+	void (*wake)(void);
 	void (*finish)(void);
 	void (*end)(void);
 	void (*recover)(void);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index dabe4ad..40617c1 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -148,7 +148,7 @@
 	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
 	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
 #else
-#ifdef CONFIG_ALPHA
+#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS)
 #define SYSCALL_ALIAS(alias, name)					\
 	asm ( #alias " = " #name "\n\t.globl " #alias)
 #else
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c6b2ab4..3aa2cd1 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1387,6 +1387,7 @@
 extern int usb_clear_halt(struct usb_device *dev, int pipe);
 extern int usb_reset_configuration(struct usb_device *dev);
 extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
 
 /* this request isn't really synchronous, but it belongs with the others */
 extern int usb_driver_set_configuration(struct usb_device *udev, int config);
@@ -1491,14 +1492,6 @@
 #define usb_pipecontrol(pipe)	(usb_pipetype((pipe)) == PIPE_CONTROL)
 #define usb_pipebulk(pipe)	(usb_pipetype((pipe)) == PIPE_BULK)
 
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
-		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
-		 ((bit) << (ep)))
-
-
 static inline unsigned int __create_pipe(struct usb_device *dev,
 		unsigned int endpoint)
 {
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index d6aad0e..d437556 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -7,6 +7,9 @@
  * key configuration differences between boards.
  */
 
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
 /* The USB role is defined by the connector used on the board, so long as
  * standards are being followed.  (Developer boards sometimes won't.)
  */
@@ -101,3 +104,5 @@
 extern int tusb6010_platform_retime(unsigned is_refclk);
 
 #endif	/* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
index 9dc1039..8df0b7f 100644
--- a/include/net/netfilter/nf_nat.h
+++ b/include/net/netfilter/nf_nat.h
@@ -18,6 +18,7 @@
 #define IP_NAT_RANGE_MAP_IPS 1
 #define IP_NAT_RANGE_PROTO_SPECIFIED 2
 #define IP_NAT_RANGE_PROTO_RANDOM 4
+#define IP_NAT_RANGE_PERSISTENT 8
 
 /* NAT sequence number modifications */
 struct nf_nat_seq {
diff --git a/include/net/udp.h b/include/net/udp.h
index 93dbe29..90e6ce5 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -124,8 +124,6 @@
 	sk_common_release(sk);
 }
 
-extern int	ipv4_rcv_saddr_equal(const struct sock *sk1,
-				    const struct sock *sk2);
 extern int	udp_lib_get_port(struct sock *sk, unsigned short snum,
 		int (*)(const struct sock*,const struct sock*));
 
diff --git a/include/sound/jack.h b/include/sound/jack.h
index 6b013c6..f236e42 100644
--- a/include/sound/jack.h
+++ b/include/sound/jack.h
@@ -50,6 +50,8 @@
 	int type;
 	const char *id;
 	char name[100];
+	void *private_data;
+	void (*private_free)(struct snd_jack *);
 };
 
 #ifdef CONFIG_SND_JACK
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 8904b19..c172968 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -268,7 +268,8 @@
 	int overrange;
 	snd_pcm_uframes_t avail_max;
 	snd_pcm_uframes_t hw_ptr_base;	/* Position at buffer restart */
-	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/
+	snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
+	unsigned long hw_ptr_jiffies;	/* Time when hw_ptr is updated */
 
 	/* -- HW params -- */
 	snd_pcm_access_t access;	/* access mode */
diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h
index 2c894b6..2fd3d25 100644
--- a/include/sound/pxa2xx-lib.h
+++ b/include/sound/pxa2xx-lib.h
@@ -42,19 +42,4 @@
 extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
 extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
 
-/* AC97 platform_data */
-/**
- * struct pxa2xx_ac97_platform_data - pxa ac97 platform data
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- *              a -1 value means no gpio will be used for reset
- *
- * Platform data should only be specified for pxa27x CPUs where a silicon bug
- * prevents correct operation of the reset line. If not specified, the default
- * behaviour is to consider gpio 113 as the AC97 reset line, which is the
- * default on most boards.
- */
-struct pxa2xx_ac97_platform_data {
-	int reset_gpio;
-};
-
 #endif
diff --git a/init/main.c b/init/main.c
index 3585f07..3bbf93b 100644
--- a/init/main.c
+++ b/init/main.c
@@ -492,6 +492,11 @@
 	return 0;
 }
 
+void __init parse_early_options(char *cmdline)
+{
+	parse_args("early options", cmdline, NULL, 0, do_early_param);
+}
+
 /* Arch code calls this early on, or if not, just before other parsing. */
 void __init parse_early_param(void)
 {
@@ -503,7 +508,7 @@
 
 	/* All fall through to do_early_param. */
 	strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-	parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
+	parse_early_options(tmp_cmdline);
 	done = 1;
 }
 
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 917ab95..6e73517 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -734,9 +734,6 @@
 	dentry = dget(path.dentry);
 	path_put(&path);
 
-	if (dentry == tagged->mnt_root && dentry == mnt->mnt_root)
-		follow_up(&mnt, &dentry);
-
 	list_add_tail(&list, &tagged->mnt_list);
 
 	mutex_lock(&audit_filter_mutex);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 7e2e7dd..2734eca 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -109,10 +109,9 @@
 	spin_lock_irqsave(&desc->lock, flags);
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
-	if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
-		cpumask_copy(desc->affinity, cpumask);
+	if (desc->status & IRQ_MOVE_PCNTXT)
 		desc->chip->set_affinity(irq, cpumask);
-	} else {
+	else {
 		desc->status |= IRQ_MOVE_PENDING;
 		cpumask_copy(desc->pending_mask, cpumask);
 	}
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index b0f0118..accb40c 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -2490,13 +2490,20 @@
 void lockdep_init_map(struct lockdep_map *lock, const char *name,
 		      struct lock_class_key *key, int subclass)
 {
-	if (unlikely(!debug_locks))
+	lock->class_cache = NULL;
+#ifdef CONFIG_LOCK_STAT
+	lock->cpu = raw_smp_processor_id();
+#endif
+
+	if (DEBUG_LOCKS_WARN_ON(!name)) {
+		lock->name = "NULL";
 		return;
+	}
+
+	lock->name = name;
 
 	if (DEBUG_LOCKS_WARN_ON(!key))
 		return;
-	if (DEBUG_LOCKS_WARN_ON(!name))
-		return;
 	/*
 	 * Sanity check, the lock-class key must be persistent:
 	 */
@@ -2505,12 +2512,11 @@
 		DEBUG_LOCKS_WARN_ON(1);
 		return;
 	}
-	lock->name = name;
 	lock->key = key;
-	lock->class_cache = NULL;
-#ifdef CONFIG_LOCK_STAT
-	lock->cpu = raw_smp_processor_id();
-#endif
+
+	if (unlikely(!debug_locks))
+		return;
+
 	if (subclass)
 		register_lock_class(lock, subclass, 1);
 }
diff --git a/kernel/panic.c b/kernel/panic.c
index 934fb37..3dcaa16 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -221,7 +221,7 @@
 	 * post-warning case.
 	 */
 	if (flag != TAINT_CRAP && flag != TAINT_WARN && __debug_locks_off())
-		printk(KERN_WARNING "Disabling lockdep due to kernel taint\n");
+		printk(KERN_WARNING "Disabling lock debugging due to kernel taint\n");
 
 	set_bit(flag, &tainted_mask);
 }
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 0854770..e71ca9c 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -646,13 +646,6 @@
 		return 0;
 
 	/*
-	 * We can't depend on SCSI devices being available after loading one of
-	 * their modules if scsi_complete_async_scans() is not called and the
-	 * resume device usually is a SCSI one.
-	 */
-	scsi_complete_async_scans();
-
-	/*
 	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
 	 * is configured into the kernel. Since the regular hibernate
 	 * trigger path is via sysfs which takes a buffer mutex before
@@ -663,32 +656,42 @@
 	 * here to avoid lockdep complaining.
 	 */
 	mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
+
+	if (swsusp_resume_device)
+		goto Check_image;
+
+	if (!strlen(resume_file)) {
+		error = -ENOENT;
+		goto Unlock;
+	}
+
+	pr_debug("PM: Checking image partition %s\n", resume_file);
+
+	/* Check if the device is there */
+	swsusp_resume_device = name_to_dev_t(resume_file);
 	if (!swsusp_resume_device) {
-		if (!strlen(resume_file)) {
-			mutex_unlock(&pm_mutex);
-			return -ENOENT;
-		}
 		/*
 		 * Some device discovery might still be in progress; we need
 		 * to wait for this to finish.
 		 */
 		wait_for_device_probe();
+		/*
+		 * We can't depend on SCSI devices being available after loading
+		 * one of their modules until scsi_complete_async_scans() is
+		 * called and the resume device usually is a SCSI one.
+		 */
+		scsi_complete_async_scans();
+
 		swsusp_resume_device = name_to_dev_t(resume_file);
-		pr_debug("PM: Resume from partition %s\n", resume_file);
-	} else {
-		pr_debug("PM: Resume from partition %d:%d\n",
-				MAJOR(swsusp_resume_device),
-				MINOR(swsusp_resume_device));
+		if (!swsusp_resume_device) {
+			error = -ENODEV;
+			goto Unlock;
+		}
 	}
 
-	if (noresume) {
-		/**
-		 * FIXME: If noresume is specified, we need to find the
-		 * partition and reset it back to normal swap space.
-		 */
-		mutex_unlock(&pm_mutex);
-		return 0;
-	}
+ Check_image:
+	pr_debug("PM: Resume from partition %d:%d\n",
+		MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
 
 	pr_debug("PM: Checking hibernation image.\n");
 	error = swsusp_check();
diff --git a/kernel/power/main.c b/kernel/power/main.c
index f172f41..f99ed6a 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -291,20 +291,26 @@
 
 	device_pm_lock();
 
+	if (suspend_ops->prepare) {
+		error = suspend_ops->prepare();
+		if (error)
+			goto Done;
+	}
+
 	error = device_power_down(PMSG_SUSPEND);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down\n");
-		goto Done;
+		goto Platfrom_finish;
 	}
 
-	if (suspend_ops->prepare) {
-		error = suspend_ops->prepare();
+	if (suspend_ops->prepare_late) {
+		error = suspend_ops->prepare_late();
 		if (error)
 			goto Power_up_devices;
 	}
 
 	if (suspend_test(TEST_PLATFORM))
-		goto Platfrom_finish;
+		goto Platform_wake;
 
 	error = disable_nonboot_cpus();
 	if (error || suspend_test(TEST_CPUS))
@@ -326,13 +332,17 @@
  Enable_cpus:
 	enable_nonboot_cpus();
 
- Platfrom_finish:
-	if (suspend_ops->finish)
-		suspend_ops->finish();
+ Platform_wake:
+	if (suspend_ops->wake)
+		suspend_ops->wake();
 
  Power_up_devices:
 	device_power_up(PMSG_RESUME);
 
+ Platfrom_finish:
+	if (suspend_ops->finish)
+		suspend_ops->finish();
+
  Done:
 	device_pm_unlock();
 
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 505f319..8ba052c 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -64,8 +64,6 @@
 	struct bio *bio;
 
 	bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
-	if (!bio)
-		return -ENOMEM;
 	bio->bi_sector = page_off * (PAGE_SIZE >> 9);
 	bio->bi_bdev = resume_bdev;
 	bio->bi_end_io = end_swap_bio_read;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index dfcd83c..0692ab5 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -188,7 +188,7 @@
 	/* Protect exec's credential calculations against our interference;
 	 * SUID, SGID and LSM creds get determined differently under ptrace.
 	 */
-	retval = mutex_lock_interruptible(&current->cred_exec_mutex);
+	retval = mutex_lock_interruptible(&task->cred_exec_mutex);
 	if (retval  < 0)
 		goto out;
 
@@ -232,7 +232,7 @@
 bad:
 	write_unlock_irqrestore(&tasklist_lock, flags);
 	task_unlock(task);
-	mutex_unlock(&current->cred_exec_mutex);
+	mutex_unlock(&task->cred_exec_mutex);
 out:
 	return retval;
 }
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 2c7b845..a967c9f 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -58,6 +58,10 @@
 static struct completion rcu_barrier_completion;
 int rcu_scheduler_active __read_mostly;
 
+static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
+static struct rcu_head rcu_migrate_head[3];
+static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
+
 /*
  * Awaken the corresponding synchronize_rcu() instance now that a
  * grace period has elapsed.
@@ -122,7 +126,10 @@
 	}
 }
 
-static inline void wait_migrated_callbacks(void);
+static inline void wait_migrated_callbacks(void)
+{
+	wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
+}
 
 /*
  * Orchestrate the specified type of RCU barrier, waiting for all
@@ -179,21 +186,12 @@
 }
 EXPORT_SYMBOL_GPL(rcu_barrier_sched);
 
-static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
-static struct rcu_head rcu_migrate_head[3];
-static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
-
 static void rcu_migrate_callback(struct rcu_head *notused)
 {
 	if (atomic_dec_and_test(&rcu_migrate_type_count))
 		wake_up(&rcu_migrate_wq);
 }
 
-static inline void wait_migrated_callbacks(void)
-{
-	wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
-}
-
 static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
 		unsigned long action, void *hcpu)
 {
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 7f32669..d2a372f 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -530,8 +530,6 @@
 	rdp->qs_pending = 1;
 	rdp->passed_quiesc = 0;
 	rdp->gpnum = rsp->gpnum;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 }
 
 /*
@@ -578,8 +576,6 @@
 	rsp->gpnum++;
 	rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
 	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 	record_gp_stall_check_time(rsp);
 	dyntick_record_completed(rsp, rsp->completed - 1);
 	note_new_gpnum(rsp, rdp);
@@ -1055,7 +1051,6 @@
 {
 	unsigned long flags;
 	long lastcomp;
-	struct rcu_data *rdp = rsp->rda[smp_processor_id()];
 	struct rcu_node *rnp = rcu_get_root(rsp);
 	u8 signaled;
 
@@ -1066,16 +1061,13 @@
 		return;	/* Someone else is already on the job. */
 	}
 	if (relaxed &&
-	    (long)(rsp->jiffies_force_qs - jiffies) >= 0 &&
-	    (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0)
+	    (long)(rsp->jiffies_force_qs - jiffies) >= 0)
 		goto unlock_ret; /* no emergency and done recently. */
 	rsp->n_force_qs++;
 	spin_lock(&rnp->lock);
 	lastcomp = rsp->completed;
 	signaled = rsp->signaled;
 	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
-				      RCU_JIFFIES_TILL_FORCE_QS;
 	if (lastcomp == rsp->gpnum) {
 		rsp->n_force_qs_ngp++;
 		spin_unlock(&rnp->lock);
@@ -1144,8 +1136,7 @@
 	 * If an RCU GP has gone long enough, go check for dyntick
 	 * idle CPUs and, if needed, send resched IPIs.
 	 */
-	if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-	    (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+	if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
 		force_quiescent_state(rsp, 1);
 
 	/*
@@ -1230,8 +1221,7 @@
 	if (unlikely(++rdp->qlen > qhimark)) {
 		rdp->blimit = LONG_MAX;
 		force_quiescent_state(rsp, 0);
-	} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-		   (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+	} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
 		force_quiescent_state(rsp, 1);
 	local_irq_restore(flags);
 }
@@ -1290,8 +1280,7 @@
 
 	/* Has an RCU GP gone long enough to send resched IPIs &c? */
 	if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
-	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
-	     (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0))
+	    ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0))
 		return 1;
 
 	/* nothing to do */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index 4ee954f..4b1875b 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -49,14 +49,12 @@
 {
 	if (!rdp->beenonline)
 		return;
-	seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x",
+	seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d",
 		   rdp->cpu,
 		   cpu_is_offline(rdp->cpu) ? '!' : ' ',
 		   rdp->completed, rdp->gpnum,
 		   rdp->passed_quiesc, rdp->passed_quiesc_completed,
-		   rdp->qs_pending,
-		   rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
-		   (int)(rdp->n_rcu_pending & 0xffff));
+		   rdp->qs_pending);
 #ifdef CONFIG_NO_HZ
 	seq_printf(m, " dt=%d/%d dn=%d df=%lu",
 		   rdp->dynticks->dynticks,
@@ -102,14 +100,12 @@
 {
 	if (!rdp->beenonline)
 		return;
-	seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld",
+	seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
 		   rdp->cpu,
 		   cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
 		   rdp->completed, rdp->gpnum,
 		   rdp->passed_quiesc, rdp->passed_quiesc_completed,
-		   rdp->qs_pending,
-		   rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
-		   rdp->n_rcu_pending);
+		   rdp->qs_pending);
 #ifdef CONFIG_NO_HZ
 	seq_printf(m, ",%d,%d,%d,%lu",
 		   rdp->dynticks->dynticks,
@@ -123,7 +119,7 @@
 
 static int show_rcudata_csv(struct seq_file *m, void *unused)
 {
-	seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\",");
+	seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",");
 #ifdef CONFIG_NO_HZ
 	seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
 #endif /* #ifdef CONFIG_NO_HZ */
diff --git a/kernel/resource.c b/kernel/resource.c
index fd5d7d5..ac5f3a3 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -533,43 +533,21 @@
 	res->end = end;
 	res->flags = IORESOURCE_BUSY;
 
-	for (;;) {
-		conflict = __request_resource(parent, res);
-		if (!conflict)
-			break;
-		if (conflict != parent) {
-			parent = conflict;
-			if (!(conflict->flags & IORESOURCE_BUSY))
-				continue;
-		}
+	conflict = __request_resource(parent, res);
+	if (!conflict)
+		return;
 
-		/* Uhhuh, that didn't work out.. */
-		kfree(res);
-		res = NULL;
-		break;
-	}
+	/* failed, split and try again */
+	kfree(res);
 
-	if (!res) {
-		/* failed, split and try again */
+	/* conflict covered whole area */
+	if (conflict->start <= start && conflict->end >= end)
+		return;
 
-		/* conflict covered whole area */
-		if (conflict->start <= start && conflict->end >= end)
-			return;
-
-		if (conflict->start > start)
-			__reserve_region_with_split(root, start, conflict->start-1, name);
-		if (!(conflict->flags & IORESOURCE_BUSY)) {
-			resource_size_t common_start, common_end;
-
-			common_start = max(conflict->start, start);
-			common_end = min(conflict->end, end);
-			if (common_start < common_end)
-				__reserve_region_with_split(root, common_start, common_end, name);
-		}
-		if (conflict->end < end)
-			__reserve_region_with_split(root, conflict->end+1, end, name);
-	}
-
+	if (conflict->start > start)
+		__reserve_region_with_split(root, start, conflict->start-1, name);
+	if (conflict->end < end)
+		__reserve_region_with_split(root, conflict->end+1, end, name);
 }
 
 void __init reserve_region_with_split(struct resource *root,
diff --git a/kernel/sched.c b/kernel/sched.c
index 5724508..b902e58 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4846,7 +4846,7 @@
 #endif
 }
 
-unsigned long get_parent_ip(unsigned long addr)
+notrace unsigned long get_parent_ip(unsigned long addr)
 {
 	if (in_lock_functions(addr)) {
 		addr = CALLER_ADDR2;
@@ -7367,8 +7367,12 @@
 		cpumask_or(groupmask, groupmask, sched_group_cpus(group));
 
 		cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
-		printk(KERN_CONT " %s (__cpu_power = %d)", str,
-						group->__cpu_power);
+
+		printk(KERN_CONT " %s", str);
+		if (group->__cpu_power != SCHED_LOAD_SCALE) {
+			printk(KERN_CONT " (__cpu_power = %d)",
+				group->__cpu_power);
+		}
 
 		group = group->next;
 	} while (group != sd->groups);
diff --git a/kernel/slow-work.c b/kernel/slow-work.c
index cf2bc01..b28d1913 100644
--- a/kernel/slow-work.c
+++ b/kernel/slow-work.c
@@ -609,14 +609,14 @@
 	if (slow_work_user_count == 0) {
 		printk(KERN_NOTICE "Slow work thread pool: Shutting down\n");
 		slow_work_threads_should_exit = true;
+		del_timer_sync(&slow_work_cull_timer);
+		del_timer_sync(&slow_work_oom_timer);
 		wake_up_all(&slow_work_thread_wq);
 		wait_for_completion(&slow_work_last_thread_exited);
 		printk(KERN_NOTICE "Slow work thread pool:"
 		       " Shut down complete\n");
 	}
 
-	del_timer_sync(&slow_work_cull_timer);
-
 	mutex_unlock(&slow_work_user_lock);
 }
 EXPORT_SYMBOL(slow_work_unregister_user);
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 2fecefa..b525dd3 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -472,9 +472,9 @@
 		printk("Attempt to kill tasklet from interrupt\n");
 
 	while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
-		do
+		do {
 			yield();
-		while (test_bit(TASKLET_STATE_SCHED, &t->state));
+		} while (test_bit(TASKLET_STATE_SCHED, &t->state));
 	}
 	tasklet_unlock_wait(t);
 	clear_bit(TASKLET_STATE_SCHED, &t->state);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index c46c931..ecfd7b5 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -181,12 +181,12 @@
 
 	resumed = test_and_clear_bit(0, &watchdog_resumed);
 
-	wdnow = watchdog->read();
+	wdnow = watchdog->read(watchdog);
 	wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
 	watchdog_last = wdnow;
 
 	list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
-		csnow = cs->read();
+		csnow = cs->read(cs);
 
 		if (unlikely(resumed)) {
 			cs->wd_last = csnow;
@@ -247,7 +247,7 @@
 
 		list_add(&cs->wd_list, &watchdog_list);
 		if (!started && watchdog) {
-			watchdog_last = watchdog->read();
+			watchdog_last = watchdog->read(watchdog);
 			watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
 			add_timer_on(&watchdog_timer,
 				     cpumask_first(cpu_online_mask));
@@ -268,7 +268,7 @@
 				cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
 			/* Start if list is not empty */
 			if (!list_empty(&watchdog_list)) {
-				watchdog_last = watchdog->read();
+				watchdog_last = watchdog->read(watchdog);
 				watchdog_timer.expires =
 					jiffies + WATCHDOG_INTERVAL;
 				add_timer_on(&watchdog_timer,
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 06f1975..c3f6c30 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -50,7 +50,7 @@
  */
 #define JIFFIES_SHIFT	8
 
-static cycle_t jiffies_read(void)
+static cycle_t jiffies_read(struct clocksource *cs)
 {
 	return (cycle_t) jiffies;
 }
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 900f1b6..687dff4 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -182,7 +182,7 @@
  */
 static void change_clocksource(void)
 {
-	struct clocksource *new;
+	struct clocksource *new, *old;
 
 	new = clocksource_get_next();
 
@@ -191,11 +191,16 @@
 
 	clocksource_forward_now();
 
-	new->raw_time = clock->raw_time;
+	if (clocksource_enable(new))
+		return;
 
+	new->raw_time = clock->raw_time;
+	old = clock;
 	clock = new;
+	clocksource_disable(old);
+
 	clock->cycle_last = 0;
-	clock->cycle_last = clocksource_read(new);
+	clock->cycle_last = clocksource_read(clock);
 	clock->error = 0;
 	clock->xtime_nsec = 0;
 	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
@@ -292,6 +297,7 @@
 	ntp_init();
 
 	clock = clocksource_get_next();
+	clocksource_enable(clock);
 	clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
 	clock->cycle_last = clocksource_read(clock);
 
diff --git a/kernel/trace/trace_branch.c b/kernel/trace/trace_branch.c
index ad8c22e..8333715 100644
--- a/kernel/trace/trace_branch.c
+++ b/kernel/trace/trace_branch.c
@@ -155,6 +155,13 @@
 	return TRACE_TYPE_HANDLED;
 }
 
+static void branch_print_header(struct seq_file *s)
+{
+	seq_puts(s, "#           TASK-PID    CPU#    TIMESTAMP  CORRECT"
+		"  FUNC:FILE:LINE\n");
+	seq_puts(s, "#              | |       |          |         |   "
+		"    |\n");
+}
 
 static struct trace_event trace_branch_event = {
 	.type		= TRACE_BRANCH,
@@ -169,6 +176,7 @@
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest	= trace_selftest_startup_branch,
 #endif /* CONFIG_FTRACE_SELFTEST */
+	.print_header	= branch_print_header,
 };
 
 __init static int init_branch_tracer(void)
diff --git a/kernel/trace/trace_power.c b/kernel/trace/trace_power.c
index bae791e..1184397 100644
--- a/kernel/trace/trace_power.c
+++ b/kernel/trace/trace_power.c
@@ -186,6 +186,12 @@
 	return TRACE_TYPE_UNHANDLED;
 }
 
+static void power_print_header(struct seq_file *s)
+{
+	seq_puts(s, "#   TIMESTAMP      STATE  EVENT\n");
+	seq_puts(s, "#       |            |      |\n");
+}
+
 static struct tracer power_tracer __read_mostly =
 {
 	.name		= "power",
@@ -194,6 +200,7 @@
 	.stop		= stop_power_trace,
 	.reset		= power_trace_reset,
 	.print_line	= power_print_line,
+	.print_header	= power_print_header,
 };
 
 static int init_power_trace(void)
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index c6e854f..812c282 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -440,7 +440,7 @@
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
+	select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390
 	select KALLSYMS
 	select KALLSYMS_ALL
 
@@ -620,7 +620,7 @@
 config FRAME_POINTER
 	bool "Compile the kernel with frame pointers"
 	depends on DEBUG_KERNEL && \
-		(CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+		(CRIS || M68K || M68KNOMMU || FRV || UML || \
 		 AVR32 || SUPERH || BLACKFIN || MN10300) || \
 		ARCH_WANT_FRAME_POINTERS
 	default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
@@ -809,13 +809,13 @@
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER if !PPC
+	select FRAME_POINTER if !PPC && !S390
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
 	bool "Latency measuring infrastructure"
-	select FRAME_POINTER if !MIPS && !PPC
+	select FRAME_POINTER if !MIPS && !PPC && !S390
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE
diff --git a/lib/Makefile b/lib/Makefile
index d6edd67..33a40e4 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -38,7 +38,7 @@
 lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
 lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o
 lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
-lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
+obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
 obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
 obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
 obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
diff --git a/lib/kobject.c b/lib/kobject.c
index a6dec32..bacf6fe 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -218,6 +218,9 @@
 	const char *old_name = kobj->name;
 	char *s;
 
+	if (kobj->name && !fmt)
+		return 0;
+
 	kobj->name = kvasprintf(GFP_KERNEL, fmt, vargs);
 	if (!kobj->name)
 		return -ENOMEM;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 97a777a..920a3ca 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -258,7 +258,7 @@
 			goto exit;
 
 		retval = call_usermodehelper(argv[0], argv,
-					     env->envp, UMH_NO_WAIT);
+					     env->envp, UMH_WAIT_EXEC);
 	}
 
 exit:
@@ -328,7 +328,7 @@
 		       "kobject_uevent: unable to create netlink socket!\n");
 		return -ENODEV;
 	}
-
+	netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV);
 	return 0;
 }
 
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index b7b449d..a295e40 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -347,9 +347,12 @@
 	sg_miter_stop(miter);
 
 	/* get to the next sg if necessary.  __offset is adjusted by stop */
-	if (miter->__offset == miter->__sg->length && --miter->__nents) {
-		miter->__sg = sg_next(miter->__sg);
-		miter->__offset = 0;
+	while (miter->__offset == miter->__sg->length) {
+		if (--miter->__nents) {
+			miter->__sg = sg_next(miter->__sg);
+			miter->__offset = 0;
+		} else
+			return false;
 	}
 
 	/* map the next page */
diff --git a/mm/filemap.c b/mm/filemap.c
index 8bd4980..379ff0b 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -441,6 +441,7 @@
 	}
 	return err;
 }
+EXPORT_SYMBOL(filemap_write_and_wait_range);
 
 /**
  * add_to_page_cache_locked - add a locked page to the pagecache
diff --git a/mm/mmap.c b/mm/mmap.c
index 4a38411..3303d1b 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1575,7 +1575,7 @@
 	 * Overcommit..  This must be the final test, as it will
 	 * update security statistics.
 	 */
-	if (security_vm_enough_memory(grow))
+	if (security_vm_enough_memory_mm(mm, grow))
 		return -ENOMEM;
 
 	/* Ok, everything looks good - let it rip */
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 39fdfb1..eac9577 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -63,6 +63,9 @@
 	/* Can mapped pages be reclaimed? */
 	int may_unmap;
 
+	/* Can pages be swapped as part of reclaim? */
+	int may_swap;
+
 	/* This context's SWAP_CLUSTER_MAX. If freeing memory for
 	 * suspend, we effectively ignore SWAP_CLUSTER_MAX.
 	 * In this context, it doesn't matter that we scan the
@@ -1380,7 +1383,7 @@
 	struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
 
 	/* If we have no swap space, do not bother scanning anon pages. */
-	if (nr_swap_pages <= 0) {
+	if (!sc->may_swap || (nr_swap_pages <= 0)) {
 		percent[0] = 0;
 		percent[1] = 100;
 		return;
@@ -1697,6 +1700,7 @@
 		.may_writepage = !laptop_mode,
 		.swap_cluster_max = SWAP_CLUSTER_MAX,
 		.may_unmap = 1,
+		.may_swap = 1,
 		.swappiness = vm_swappiness,
 		.order = order,
 		.mem_cgroup = NULL,
@@ -1717,6 +1721,7 @@
 	struct scan_control sc = {
 		.may_writepage = !laptop_mode,
 		.may_unmap = 1,
+		.may_swap = !noswap,
 		.swap_cluster_max = SWAP_CLUSTER_MAX,
 		.swappiness = swappiness,
 		.order = 0,
@@ -1726,9 +1731,6 @@
 	};
 	struct zonelist *zonelist;
 
-	if (noswap)
-		sc.may_unmap = 0;
-
 	sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
 			(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
 	zonelist = NODE_DATA(numa_node_id())->node_zonelists;
@@ -1767,6 +1769,7 @@
 	struct scan_control sc = {
 		.gfp_mask = GFP_KERNEL,
 		.may_unmap = 1,
+		.may_swap = 1,
 		.swap_cluster_max = SWAP_CLUSTER_MAX,
 		.swappiness = vm_swappiness,
 		.order = order,
@@ -2088,13 +2091,13 @@
 				nr_reclaimed += shrink_list(l, nr_to_scan, zone,
 								sc, prio);
 				if (nr_reclaimed >= nr_pages) {
-					sc->nr_reclaimed = nr_reclaimed;
+					sc->nr_reclaimed += nr_reclaimed;
 					return;
 				}
 			}
 		}
 	}
-	sc->nr_reclaimed = nr_reclaimed;
+	sc->nr_reclaimed += nr_reclaimed;
 }
 
 /*
@@ -2115,6 +2118,7 @@
 		.may_unmap = 0,
 		.may_writepage = 1,
 		.isolate_pages = isolate_pages_global,
+		.nr_reclaimed = 0,
 	};
 
 	current->reclaim_state = &reclaim_state;
@@ -2297,6 +2301,7 @@
 	struct scan_control sc = {
 		.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE),
 		.may_unmap = !!(zone_reclaim_mode & RECLAIM_SWAP),
+		.may_swap = 1,
 		.swap_cluster_max = max_t(unsigned long, nr_pages,
 					SWAP_CLUSTER_MAX),
 		.gfp_mask = gfp_mask,
diff --git a/net/802/tr.c b/net/802/tr.c
index e7eb130..e874447 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -561,6 +561,9 @@
 				}
 				seq_putc(seq, '\n');
 			}
+
+		if (dev)
+			dev_put(dev);
 		}
 	return 0;
 }
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 654e45f..c67fe6f 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -121,8 +121,10 @@
 	if (!skb)
 		return NET_RX_DROP;
 
-	if (netpoll_rx_on(skb))
+	if (netpoll_rx_on(skb)) {
+		skb->protocol = eth_type_trans(skb, skb->dev);
 		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci);
+	}
 
 	return napi_frags_finish(napi, skb,
 				 vlan_gro_common(napi, grp, vlan_tci, skb));
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 1b34135..6b09213 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -668,7 +668,8 @@
 	const struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	struct net_device *real_dev = vlan->real_dev;
 
-	if (!real_dev->ethtool_ops->get_settings)
+	if (!real_dev->ethtool_ops ||
+	    !real_dev->ethtool_ops->get_settings)
 		return -EOPNOTSUPP;
 
 	return real_dev->ethtool_ops->get_settings(real_dev, cmd);
diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c
index 57aeba7..832bcf0 100644
--- a/net/ax25/ax25_uid.c
+++ b/net/ax25/ax25_uid.c
@@ -148,9 +148,13 @@
 {
 	struct ax25_uid_assoc *pt;
 	struct hlist_node *node;
-	int i = 0;
+	int i = 1;
 
 	read_lock(&ax25_uid_lock);
+
+	if (*pos == 0)
+		return SEQ_START_TOKEN;
+
 	ax25_uid_for_each(pt, node, &ax25_uid_list) {
 		if (i == *pos)
 			return pt;
@@ -162,8 +166,10 @@
 static void *ax25_uid_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	++*pos;
-
-	return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next,
+	if (v == SEQ_START_TOKEN)
+		return ax25_uid_list.first;
+	else
+		return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next,
 			   ax25_uid_assoc, uid_node);
 }
 
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 5553424..15f40ea 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -866,8 +866,16 @@
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
-	if (!conn)
-		goto unlock;
+	if (!conn) {
+		if (ev->link_type != SCO_LINK)
+			goto unlock;
+
+		conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
+		if (!conn)
+			goto unlock;
+
+		conn->type = SCO_LINK;
+	}
 
 	if (!ev->status) {
 		conn->handle = __le16_to_cpu(ev->handle);
@@ -1646,20 +1654,28 @@
 		conn->type = SCO_LINK;
 	}
 
-	if (conn->out && ev->status == 0x1c && conn->attempt < 2) {
-		conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
-					(hdev->esco_type & EDR_ESCO_MASK);
-		hci_setup_sync(conn, conn->link->handle);
-		goto unlock;
-	}
-
-	if (!ev->status) {
+	switch (ev->status) {
+	case 0x00:
 		conn->handle = __le16_to_cpu(ev->handle);
 		conn->state  = BT_CONNECTED;
 
 		hci_conn_add_sysfs(conn);
-	} else
+		break;
+
+	case 0x1c:	/* SCO interval rejected */
+	case 0x1f:	/* Unspecified error */
+		if (conn->out && conn->attempt < 2) {
+			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
+					(hdev->esco_type & EDR_ESCO_MASK);
+			hci_setup_sync(conn, conn->link->handle);
+			goto unlock;
+		}
+		/* fall through */
+
+	default:
 		conn->state = BT_CLOSED;
+		break;
+	}
 
 	hci_proto_connect_cfm(conn, ev->status);
 	if (ev->status)
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 1d0fb0f..374536e 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -1194,6 +1194,8 @@
 
 	rfcomm_send_ua(d->session, d->dlci);
 
+	rfcomm_dlc_clear_timer(d);
+
 	rfcomm_dlc_lock(d);
 	d->state = BT_CONNECTED;
 	d->state_change(d, 0);
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 547bafc..10f0528 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -674,8 +674,8 @@
 
 	rcu_read_unlock();
 
-	/* free the skbuff allocated by the netdevice driver */
-	kfree_skb(skb);
+	/* consume the skbuff allocated by the netdevice driver */
+	consume_skb(skb);
 
 	if (matches > 0) {
 		can_stats.matches++;
diff --git a/net/core/dev.c b/net/core/dev.c
index 91d792d..308a7d0 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1336,7 +1336,12 @@
 {
 	struct packet_type *ptype;
 
+#ifdef CONFIG_NET_CLS_ACT
+	if (!(skb->tstamp.tv64 && (G_TC_FROM(skb->tc_verd) & AT_INGRESS)))
+		net_timestamp(skb);
+#else
 	net_timestamp(skb);
+#endif
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(ptype, &ptype_all, list) {
@@ -1430,7 +1435,7 @@
 {
 	if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
 	    netif_running(dev)) {
-		netif_stop_queue(dev);
+		netif_tx_stop_all_queues(dev);
 	}
 }
 EXPORT_SYMBOL(netif_device_detach);
@@ -1445,7 +1450,7 @@
 {
 	if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
 	    netif_running(dev)) {
-		netif_wake_queue(dev);
+		netif_tx_wake_all_queues(dev);
 		__netdev_watchdog_up(dev);
 	}
 }
@@ -2328,8 +2333,10 @@
 	struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK];
 	int err = -ENOENT;
 
-	if (NAPI_GRO_CB(skb)->count == 1)
+	if (NAPI_GRO_CB(skb)->count == 1) {
+		skb_shinfo(skb)->gso_size = 0;
 		goto out;
+	}
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(ptype, head, list) {
@@ -2348,7 +2355,6 @@
 	}
 
 out:
-	skb_shinfo(skb)->gso_size = 0;
 	return netif_receive_skb(skb);
 }
 
@@ -2539,9 +2545,9 @@
 	}
 
 	BUG_ON(info->nr_frags > MAX_SKB_FRAGS);
-	frag = &info->frags[info->nr_frags - 1];
+	frag = info->frags;
 
-	for (i = skb_shinfo(skb)->nr_frags; i < info->nr_frags; i++) {
+	for (i = 0; i < info->nr_frags; i++) {
 		skb_fill_page_desc(skb, i, frag->page, frag->page_offset,
 				   frag->size);
 		frag++;
@@ -4399,7 +4405,7 @@
 	dev->iflink = -1;
 
 #ifdef CONFIG_COMPAT_NET_DEV_OPS
-	/* Netdevice_ops API compatiability support.
+	/* Netdevice_ops API compatibility support.
 	 * This is temporary until all network devices are converted.
 	 */
 	if (dev->netdev_ops) {
@@ -4410,7 +4416,7 @@
 			dev->name, netdev_drivername(dev, drivername, 64));
 
 		/* This works only because net_device_ops and the
-		   compatiablity structure are the same. */
+		   compatibility structure are the same. */
 		dev->netdev_ops = (void *) &(dev->init);
 	}
 #endif
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index fe65187..3229e0a 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -211,7 +211,8 @@
 	minip = ntohl(range->min_ip);
 	maxip = ntohl(range->max_ip);
 	j = jhash_2words((__force u32)tuple->src.u3.ip,
-			 (__force u32)tuple->dst.u3.ip, 0);
+			 range->flags & IP_NAT_RANGE_PERSISTENT ?
+				(__force u32)tuple->dst.u3.ip : 0, 0);
 	j = ((u64)j * (maxip - minip + 1)) >> 32;
 	*var_ipp = htonl(minip + j);
 }
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index fafbec8..1d7f49c 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2511,6 +2511,7 @@
 	struct sk_buff *p;
 	struct tcphdr *th;
 	struct tcphdr *th2;
+	unsigned int len;
 	unsigned int thlen;
 	unsigned int flags;
 	unsigned int mss = 1;
@@ -2531,6 +2532,7 @@
 
 	skb_gro_pull(skb, thlen);
 
+	len = skb_gro_len(skb);
 	flags = tcp_flag_word(th);
 
 	for (; (p = *head); head = &p->next) {
@@ -2561,7 +2563,7 @@
 
 	mss = skb_shinfo(p)->gso_size;
 
-	flush |= (skb_gro_len(skb) > mss) | !skb_gro_len(skb);
+	flush |= (len > mss) | !len;
 	flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq);
 
 	if (flush || skb_gro_receive(head, skb)) {
@@ -2574,7 +2576,7 @@
 	tcp_flag_word(th2) |= flags & (TCP_FLAG_FIN | TCP_FLAG_PSH);
 
 out_check_final:
-	flush = skb_gro_len(skb) < mss;
+	flush = len < mss;
 	flush |= flags & (TCP_FLAG_URG | TCP_FLAG_PSH | TCP_FLAG_RST |
 			  TCP_FLAG_SYN | TCP_FLAG_FIN);
 
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 2bc8e27..c96a6bb 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -928,6 +928,8 @@
 	tcp_set_rto(sk);
 	if (inet_csk(sk)->icsk_rto < TCP_TIMEOUT_INIT && !tp->rx_opt.saw_tstamp)
 		goto reset;
+
+cwnd:
 	tp->snd_cwnd = tcp_init_cwnd(tp, dst);
 	tp->snd_cwnd_stamp = tcp_time_stamp;
 	return;
@@ -942,6 +944,7 @@
 		tp->mdev = tp->mdev_max = tp->rttvar = TCP_TIMEOUT_INIT;
 		inet_csk(sk)->icsk_rto = TCP_TIMEOUT_INIT;
 	}
+	goto cwnd;
 }
 
 static void tcp_update_reordering(struct sock *sk, const int metric,
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 53300fa..59aec60 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -778,7 +778,7 @@
 
 	if (tp->lost_skb_hint &&
 	    before(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(tp->lost_skb_hint)->seq) &&
-	    (tcp_is_fack(tp) || TCP_SKB_CB(skb)->sacked))
+	    (tcp_is_fack(tp) || (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED)))
 		tp->lost_cnt_hint -= decr;
 
 	tcp_verify_left_out(tp);
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index bda08a0..7a1d1ce 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -222,7 +222,7 @@
 	return error;
 }
 
-int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
+static int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
 {
 	struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2);
 
@@ -1823,7 +1823,6 @@
 EXPORT_SYMBOL(udp_lib_setsockopt);
 EXPORT_SYMBOL(udp_poll);
 EXPORT_SYMBOL(udp_lib_get_port);
-EXPORT_SYMBOL(ipv4_rcv_saddr_equal);
 
 #ifdef CONFIG_PROC_FS
 EXPORT_SYMBOL(udp_proc_register);
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index d31df0f..a7fdf9a 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -380,10 +380,6 @@
 			default:
 				goto sticky_done;
 			}
-
-			if ((rthdr->hdrlen & 1) ||
-			    (rthdr->hdrlen >> 1) != rthdr->segments_left)
-				goto sticky_done;
 		}
 
 		retv = 0;
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 6842dd2..8905712 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -53,6 +53,8 @@
 {
 	const struct in6_addr *sk_rcv_saddr6 = &inet6_sk(sk)->rcv_saddr;
 	const struct in6_addr *sk2_rcv_saddr6 = inet6_rcv_saddr(sk2);
+	__be32 sk_rcv_saddr = inet_sk(sk)->rcv_saddr;
+	__be32 sk2_rcv_saddr = inet_rcv_saddr(sk2);
 	int sk_ipv6only = ipv6_only_sock(sk);
 	int sk2_ipv6only = inet_v6_ipv6only(sk2);
 	int addr_type = ipv6_addr_type(sk_rcv_saddr6);
@@ -60,7 +62,9 @@
 
 	/* if both are mapped, treat as IPv4 */
 	if (addr_type == IPV6_ADDR_MAPPED && addr_type2 == IPV6_ADDR_MAPPED)
-		return ipv4_rcv_saddr_equal(sk, sk2);
+		return (!sk2_ipv6only &&
+			(!sk_rcv_saddr || !sk2_rcv_saddr ||
+			  sk_rcv_saddr == sk2_rcv_saddr));
 
 	if (addr_type2 == IPV6_ADDR_ANY &&
 	    !(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED))
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index 49e7865..b51c918 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -172,6 +172,7 @@
 			err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo);
 		}
 
+	case IUCV_CLOSING:   /* fall through */
 		sk->sk_state = IUCV_CLOSED;
 		sk->sk_state_change(sk);
 
@@ -224,6 +225,8 @@
 	spin_lock_init(&iucv_sk(sk)->message_q.lock);
 	skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q);
 	iucv_sk(sk)->send_tag = 0;
+	iucv_sk(sk)->path = NULL;
+	memset(&iucv_sk(sk)->src_user_id , 0, 32);
 
 	sk->sk_destruct = iucv_sock_destruct;
 	sk->sk_sndtimeo = IUCV_CONN_TIMEOUT;
@@ -811,6 +814,8 @@
 
 	target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
 
+	/* receive/dequeue next skb:
+	 * the function understands MSG_PEEK and, thus, does not dequeue skb */
 	skb = skb_recv_datagram(sk, flags, noblock, &err);
 	if (!skb) {
 		if (sk->sk_shutdown & RCV_SHUTDOWN)
@@ -858,9 +863,7 @@
 				iucv_process_message_q(sk);
 			spin_unlock_bh(&iucv->message_q.lock);
 		}
-
-	} else
-		skb_queue_head(&sk->sk_receive_queue, skb);
+	}
 
 done:
 	return err ? : copied;
@@ -934,6 +937,9 @@
 
 	lock_sock(sk);
 	switch (sk->sk_state) {
+	case IUCV_DISCONN:
+	case IUCV_CLOSING:
+	case IUCV_SEVERED:
 	case IUCV_CLOSED:
 		err = -ENOTCONN;
 		goto fail;
@@ -1113,8 +1119,12 @@
 	struct sock_msg_q *save_msg;
 	int len;
 
-	if (sk->sk_shutdown & RCV_SHUTDOWN)
+	if (sk->sk_shutdown & RCV_SHUTDOWN) {
+		iucv_message_reject(path, msg);
 		return;
+	}
+
+	spin_lock(&iucv->message_q.lock);
 
 	if (!list_empty(&iucv->message_q.list) ||
 	    !skb_queue_empty(&iucv->backlog_skb_q))
@@ -1129,9 +1139,8 @@
 	if (!skb)
 		goto save_message;
 
-	spin_lock(&iucv->message_q.lock);
 	iucv_process_message(sk, skb, path, msg);
-	spin_unlock(&iucv->message_q.lock);
+	goto out_unlock;
 
 	return;
 
@@ -1142,8 +1151,9 @@
 	save_msg->path = path;
 	save_msg->msg = *msg;
 
-	spin_lock(&iucv->message_q.lock);
 	list_add_tail(&save_msg->list, &iucv->message_q.list);
+
+out_unlock:
 	spin_unlock(&iucv->message_q.lock);
 }
 
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index f3d9ae3..ecc3faf 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -202,10 +202,3 @@
 	  and show them in debugfs.
 
 	  If unsure, say N.
-
-config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
-	bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
-	depends on MAC80211_DEBUG_MENU
-	---help---
-	  Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
-	  debug messages.
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index a6f1d8a..fbcbed6 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -258,7 +258,7 @@
 			(chan->max_power - local->power_constr_level) :
 			chan->max_power;
 
-	if (local->user_power_level)
+	if (local->user_power_level >= 0)
 		power = min(power, local->user_power_level);
 
 	if (local->hw.conf.power_level != power) {
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 7ecda9d..132938b 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -441,6 +441,9 @@
 	u8 index, indexn1, indexn2;
 	struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim;
 
+	if (unlikely(!tim || elems->tim_len < 4))
+		return false;
+
 	aid &= 0x3fff;
 	index = aid / 8;
 	mask  = 1 << (aid & 7);
@@ -945,9 +948,13 @@
 			     u.mgd.beacon_loss_work);
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
-	printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
-	       "- sending probe request\n", sdata->dev->name,
-	       sdata->u.mgd.bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	if (net_ratelimit()) {
+		printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
+		       "- sending probe request\n", sdata->dev->name,
+		       sdata->u.mgd.bssid);
+	}
+#endif
 
 	ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
 	ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
@@ -1007,9 +1014,13 @@
 	      (local->hw.conf.flags & IEEE80211_CONF_PS)) &&
 	    time_after(jiffies,
 		       ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) {
-		printk(KERN_DEBUG "%s: beacon loss from AP %pM "
-		       "- sending probe request\n",
-		       sdata->dev->name, ifmgd->bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+		if (net_ratelimit()) {
+			printk(KERN_DEBUG "%s: beacon loss from AP %pM "
+			       "- sending probe request\n",
+			       sdata->dev->name, ifmgd->bssid);
+		}
+#endif
 		ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
 		ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
 					 ifmgd->ssid_len, NULL, 0);
@@ -1355,7 +1366,7 @@
 
 	for (i = 0; i < elems.ext_supp_rates_len; i++) {
 		int rate = (elems.ext_supp_rates[i] & 0x7f) * 5;
-		bool is_basic = !!(elems.supp_rates[i] & 0x80);
+		bool is_basic = !!(elems.ext_supp_rates[i] & 0x80);
 
 		if (rate > 110)
 			have_higher_than_11mbit = true;
@@ -1902,9 +1913,17 @@
 
 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
 {
-	if (sdata->vif.type == NL80211_IFTYPE_STATION)
+	if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+		/*
+		 * Need to update last_beacon to avoid beacon loss
+		 * test to trigger.
+		 */
+		sdata->u.mgd.last_beacon = jiffies;
+
+
 		queue_work(sdata->local->hw.workqueue,
 			   &sdata->u.mgd.work);
+	}
 }
 
 /* interface setup */
@@ -2105,12 +2124,13 @@
 	struct ieee80211_local *local =
 		container_of(work, struct ieee80211_local,
 			     dynamic_ps_enable_work);
+	/* XXX: using scan_sdata is completely broken! */
 	struct ieee80211_sub_if_data *sdata = local->scan_sdata;
 
 	if (local->hw.conf.flags & IEEE80211_CONF_PS)
 		return;
 
-	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+	if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata)
 		ieee80211_send_nullfunc(local, sdata, 1);
 
 	local->hw.conf.flags |= IEEE80211_CONF_PS;
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 0273023..81985d2 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -156,8 +156,19 @@
 		case NL80211_IFTYPE_ADHOC:
 		case NL80211_IFTYPE_AP:
 		case NL80211_IFTYPE_MESH_POINT:
-			WARN_ON(ieee80211_if_config(sdata, changed));
-			ieee80211_bss_info_change_notify(sdata, ~0);
+			/*
+			 * Driver's config_interface can fail if rfkill is
+			 * enabled. Accommodate this return code.
+			 * FIXME: When mac80211 has knowledge of rfkill
+			 * state the code below can change back to:
+			 *   WARN(ieee80211_if_config(sdata, changed));
+			 *   ieee80211_bss_info_change_notify(sdata, ~0);
+			 */
+			if (ieee80211_if_config(sdata, changed))
+				printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
+				       sdata->dev->name);
+			else
+				ieee80211_bss_info_change_notify(sdata, ~0);
 			break;
 		case NL80211_IFTYPE_WDS:
 			break;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 64ebe66..9776f73 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -29,6 +29,7 @@
 static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 					   struct tid_ampdu_rx *tid_agg_rx,
 					   struct sk_buff *skb,
+					   struct ieee80211_rx_status *status,
 					   u16 mpdu_seq_num,
 					   int bar_req);
 /*
@@ -1396,7 +1397,7 @@
 		 * mac80211. That also explains the __skb_push()
 		 * below.
 		 */
-		align = (unsigned long)skb->data & 4;
+		align = (unsigned long)skb->data & 3;
 		if (align) {
 			if (WARN_ON(skb_headroom(skb) < 3)) {
 				dev_kfree_skb(skb);
@@ -1688,7 +1689,7 @@
 		/* manage reordering buffer according to requested */
 		/* sequence number */
 		rcu_read_lock();
-		ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL,
+		ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL,
 						 start_seq_num, 1);
 		rcu_read_unlock();
 		return RX_DROP_UNUSABLE;
@@ -2293,6 +2294,7 @@
 static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 					   struct tid_ampdu_rx *tid_agg_rx,
 					   struct sk_buff *skb,
+					   struct ieee80211_rx_status *rxstatus,
 					   u16 mpdu_seq_num,
 					   int bar_req)
 {
@@ -2374,6 +2376,8 @@
 
 	/* put the frame in the reordering buffer */
 	tid_agg_rx->reorder_buf[index] = skb;
+	memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
+	       sizeof(*rxstatus));
 	tid_agg_rx->stored_mpdu_num++;
 	/* release the buffer until next missing frame */
 	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
@@ -2399,7 +2403,8 @@
 }
 
 static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
-				     struct sk_buff *skb)
+				     struct sk_buff *skb,
+				     struct ieee80211_rx_status *status)
 {
 	struct ieee80211_hw *hw = &local->hw;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
@@ -2448,7 +2453,7 @@
 
 	/* according to mpdu sequence number deal with reordering buffer */
 	mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
-	ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb,
+	ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status,
 						mpdu_seq_num, 0);
  end_reorder:
 	return ret;
@@ -2512,7 +2517,7 @@
 		return;
 	}
 
-	if (!ieee80211_rx_reorder_ampdu(local, skb))
+	if (!ieee80211_rx_reorder_ampdu(local, skb, status))
 		__ieee80211_rx_handle_packet(hw, skb, status, rate);
 
 	rcu_read_unlock();
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index deb4ece..959aa83 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -417,6 +417,7 @@
 {
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_channel* chan = local->hw.conf.channel;
+	bool reconf = false;
 	u32 reconf_flags = 0;
 	int new_power_level;
 
@@ -427,14 +428,38 @@
 	if (!chan)
 		return -EINVAL;
 
-	if (data->txpower.fixed)
-		new_power_level = min(data->txpower.value, chan->max_power);
-	else /* Automatic power level setting */
-		new_power_level = chan->max_power;
+	/* only change when not disabling */
+	if (!data->txpower.disabled) {
+		if (data->txpower.fixed) {
+			if (data->txpower.value < 0)
+				return -EINVAL;
+			new_power_level = data->txpower.value;
+			/*
+			 * Debatable, but we cannot do a fixed power
+			 * level above the regulatory constraint.
+			 * Use "iwconfig wlan0 txpower 15dBm" instead.
+			 */
+			if (new_power_level > chan->max_power)
+				return -EINVAL;
+		} else {
+			/*
+			 * Automatic power level setting, max being the value
+			 * passed in from userland.
+			 */
+			if (data->txpower.value < 0)
+				new_power_level = -1;
+			else
+				new_power_level = data->txpower.value;
+		}
 
-	local->user_power_level = new_power_level;
-	if (local->hw.conf.power_level != new_power_level)
-		reconf_flags |= IEEE80211_CONF_CHANGE_POWER;
+		reconf = true;
+
+		/*
+		 * ieee80211_hw_config() will limit to the channel's
+		 * max power and possibly power constraint from AP.
+		 */
+		local->user_power_level = new_power_level;
+	}
 
 	if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
 		local->hw.conf.radio_enabled = !(data->txpower.disabled);
@@ -442,7 +467,7 @@
 		ieee80211_led_radio(local, local->hw.conf.radio_enabled);
 	}
 
-	if (reconf_flags)
+	if (reconf || reconf_flags)
 		ieee80211_hw_config(local, reconf_flags);
 
 	return 0;
@@ -530,7 +555,7 @@
 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 
 	frag->value = local->fragmentation_threshold;
-	frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD);
+	frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD);
 	frag->fixed = 1;
 
 	return 0;
diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c
index 30b8e90..0fa5a42 100644
--- a/net/netfilter/nf_conntrack_helper.c
+++ b/net/netfilter/nf_conntrack_helper.c
@@ -176,7 +176,7 @@
 	}
 
 	/* Get rid of expecteds, set helpers to NULL. */
-	hlist_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
+	hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
 		unhelp(h, me);
 	for (i = 0; i < nf_conntrack_htable_size; i++) {
 		hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode)
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index c6439c7..f13fc57 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -512,7 +512,7 @@
 
 	skb = ctnetlink_alloc_skb(tuple(ct, IP_CT_DIR_ORIGINAL), GFP_ATOMIC);
 	if (!skb)
-		return NOTIFY_DONE;
+		goto errout;
 
 	b = skb->tail;
 
@@ -591,8 +591,9 @@
 nla_put_failure:
 	rcu_read_unlock();
 nlmsg_failure:
-	nfnetlink_set_err(0, group, -ENOBUFS);
 	kfree_skb(skb);
+errout:
+	nfnetlink_set_err(0, group, -ENOBUFS);
 	return NOTIFY_DONE;
 }
 #endif /* CONFIG_NF_CONNTRACK_EVENTS */
@@ -987,7 +988,7 @@
 {
 	struct nf_conntrack_helper *helper;
 	struct nf_conn_help *help = nfct_help(ct);
-	char *helpname;
+	char *helpname = NULL;
 	int err;
 
 	/* don't change helper of sibling connections */
@@ -1230,7 +1231,7 @@
 
 	rcu_read_lock();
  	if (cda[CTA_HELP]) {
- 		char *helpname;
+		char *helpname = NULL;
  
  		err = ctnetlink_parse_help(cda[CTA_HELP], &helpname);
  		if (err < 0)
@@ -1564,7 +1565,7 @@
 
 	skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
 	if (!skb)
-		return NOTIFY_DONE;
+		goto errout;
 
 	b = skb->tail;
 
@@ -1589,8 +1590,9 @@
 nla_put_failure:
 	rcu_read_unlock();
 nlmsg_failure:
-	nfnetlink_set_err(0, 0, -ENOBUFS);
 	kfree_skb(skb);
+errout:
+	nfnetlink_set_err(0, 0, -ENOBUFS);
 	return NOTIFY_DONE;
 }
 #endif
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index 8bb998f..beb3731 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -36,10 +36,14 @@
 int nf_log_register(u_int8_t pf, struct nf_logger *logger)
 {
 	const struct nf_logger *llog;
+	int i;
 
 	if (pf >= ARRAY_SIZE(nf_loggers))
 		return -EINVAL;
 
+	for (i = 0; i < ARRAY_SIZE(logger->list); i++)
+		INIT_LIST_HEAD(&logger->list[i]);
+
 	mutex_lock(&nf_log_mutex);
 
 	if (pf == NFPROTO_UNSPEC) {
diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c
index 2785d66..b8ab37a 100644
--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -203,7 +203,7 @@
 				     nfnetlink_rcv, NULL, THIS_MODULE);
 	if (!nfnl) {
 		printk(KERN_ERR "cannot initialize nfnetlink!\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	return 0;
diff --git a/net/netlabel/netlabel_addrlist.c b/net/netlabel/netlabel_addrlist.c
index 834c6eb..c051913 100644
--- a/net/netlabel/netlabel_addrlist.c
+++ b/net/netlabel/netlabel_addrlist.c
@@ -256,13 +256,11 @@
 {
 	struct netlbl_af4list *entry;
 
-	entry = netlbl_af4list_search(addr, head);
-	if (entry != NULL && entry->addr == addr && entry->mask == mask) {
-		netlbl_af4list_remove_entry(entry);
-		return entry;
-	}
-
-	return NULL;
+	entry = netlbl_af4list_search_exact(addr, mask, head);
+	if (entry == NULL)
+		return NULL;
+	netlbl_af4list_remove_entry(entry);
+	return entry;
 }
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -299,15 +297,11 @@
 {
 	struct netlbl_af6list *entry;
 
-	entry = netlbl_af6list_search(addr, head);
-	if (entry != NULL &&
-	    ipv6_addr_equal(&entry->addr, addr) &&
-	    ipv6_addr_equal(&entry->mask, mask)) {
-		netlbl_af6list_remove_entry(entry);
-		return entry;
-	}
-
-	return NULL;
+	entry = netlbl_af6list_search_exact(addr, mask, head);
+	if (entry == NULL)
+		return NULL;
+	netlbl_af6list_remove_entry(entry);
+	return entry;
 }
 #endif /* IPv6 */
 
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 4e705f8..3be0e01 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -1084,8 +1084,10 @@
 
 	/* Build a packet - the conventional user limit is 236 bytes. We can
 	   do ludicrously large NetROM frames but must not overflow */
-	if (len > 65536)
-		return -EMSGSIZE;
+	if (len > 65536) {
+		err = -EMSGSIZE;
+		goto out;
+	}
 
 	SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n");
 	size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 74776de..f546e81 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -1758,8 +1758,9 @@
 
 static inline char *alloc_one_pg_vec_page(unsigned long order)
 {
-	return (char *) __get_free_pages(GFP_KERNEL | __GFP_COMP | __GFP_ZERO,
-					 order);
+	gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP | __GFP_ZERO | __GFP_NOWARN;
+
+	return (char *) __get_free_pages(gfp_flags, order);
 }
 
 static char **alloc_pg_vec(struct tpacket_req *req, int order)
diff --git a/net/rds/rds.h b/net/rds/rds.h
index 619f0a3..7179444 100644
--- a/net/rds/rds.h
+++ b/net/rds/rds.h
@@ -638,7 +638,7 @@
 void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force);
 
 /* stats.c */
-DECLARE_PER_CPU(struct rds_statistics, rds_stats);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats);
 #define rds_stats_inc_which(which, member) do {		\
 	per_cpu(which, get_cpu()).member++;		\
 	put_cpu();					\
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 0f36e8d..877a7f6 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -1072,10 +1072,6 @@
 	unsigned char *asmptr;
 	int n, size, qbit = 0;
 
-	/* ROSE empty frame has no meaning : don't send */
-	if (len == 0)
-		return 0;
-
 	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT))
 		return -EINVAL;
 
@@ -1273,12 +1269,6 @@
 	skb_reset_transport_header(skb);
 	copied     = skb->len;
 
-	/* ROSE empty frame has no meaning : ignore it */
-	if (copied == 0) {
-		skb_free_datagram(sk, skb);
-		return copied;
-	}
-
 	if (copied > size) {
 		copied = size;
 		msg->msg_flags |= MSG_TRUNC;
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index 72cf86e..fad596b 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -176,8 +176,10 @@
 
 META_COLLECTOR(int_vlan_tag)
 {
-	unsigned short uninitialized_var(tag);
-	if (vlan_get_tag(skb, &tag) < 0)
+	unsigned short tag;
+
+	tag = vlan_tx_tag_get(skb);
+	if (!tag && __vlan_get_tag(skb, &tag))
 		*err = -1;
 	else
 		dst->value = tag;
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index d876b87..2b88295 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -280,6 +280,14 @@
 			if (unlikely(!skb))
 				return NULL;
 
+#ifdef CONFIG_NET_CLS_ACT
+			/*
+			 * If it's at ingress let's pretend the delay is
+			 * from the network (tstamp will be updated).
+			 */
+			if (G_TC_FROM(skb->tc_verd) & AT_INGRESS)
+				skb->tstamp.tv64 = 0;
+#endif
 			pr_debug("netem_dequeue: return skb=%p\n", skb);
 			sch->q.qlen--;
 			return skb;
diff --git a/net/wireless/core.h b/net/wireless/core.h
index d43daa2..0a592e4 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -90,7 +90,7 @@
 	struct rb_node rbn;
 	unsigned long ts;
 	struct kref ref;
-	bool hold;
+	bool hold, ies_allocated;
 
 	/* must be last because of priv member */
 	struct cfg80211_bss pub;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 353e1a4..2456e4e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3334,7 +3334,7 @@
 	struct sk_buff *msg;
 	void *hdr;
 
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
 	if (!msg)
 		return;
 
@@ -3353,7 +3353,7 @@
 		return;
 	}
 
-	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL);
+	genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
 	return;
 
  nla_put_failure:
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6327e16..6c1993d 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2095,11 +2095,12 @@
 /* Caller must hold cfg80211_mutex */
 void reg_device_remove(struct wiphy *wiphy)
 {
-	struct wiphy *request_wiphy;
+	struct wiphy *request_wiphy = NULL;
 
 	assert_cfg80211_lock();
 
-	request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
+	if (last_request)
+		request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
 
 	kfree(wiphy->regd);
 	if (!last_request || !request_wiphy)
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 2a00e36..2ae65b3 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -58,6 +58,10 @@
 	bss = container_of(ref, struct cfg80211_internal_bss, ref);
 	if (bss->pub.free_priv)
 		bss->pub.free_priv(&bss->pub);
+
+	if (bss->ies_allocated)
+		kfree(bss->pub.information_elements);
+
 	kfree(bss);
 }
 
@@ -360,19 +364,41 @@
 
 	found = rb_find_bss(dev, res);
 
-	if (found && overwrite) {
-		list_replace(&found->list, &res->list);
-		rb_replace_node(&found->rbn, &res->rbn,
-				&dev->bss_tree);
-		kref_put(&found->ref, bss_release);
-		found = res;
-	} else if (found) {
+	if (found) {
 		kref_get(&found->ref);
 		found->pub.beacon_interval = res->pub.beacon_interval;
 		found->pub.tsf = res->pub.tsf;
 		found->pub.signal = res->pub.signal;
 		found->pub.capability = res->pub.capability;
 		found->ts = res->ts;
+
+		/* overwrite IEs */
+		if (overwrite) {
+			size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
+			size_t ielen = res->pub.len_information_elements;
+
+			if (ksize(found) >= used + ielen) {
+				memcpy(found->pub.information_elements,
+				       res->pub.information_elements, ielen);
+				found->pub.len_information_elements = ielen;
+			} else {
+				u8 *ies = found->pub.information_elements;
+
+				if (found->ies_allocated) {
+					if (ksize(ies) < ielen)
+						ies = krealloc(ies, ielen,
+							       GFP_ATOMIC);
+				} else
+					ies = kmalloc(ielen, GFP_ATOMIC);
+
+				if (ies) {
+					memcpy(ies, res->pub.information_elements, ielen);
+					found->ies_allocated = true;
+					found->pub.information_elements = ies;
+				}
+			}
+		}
+
 		kref_put(&res->ref, bss_release);
 	} else {
 		/* this "consumes" the reference */
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 39a9642..5c4b7a4 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -27,6 +27,9 @@
 cppflags-y :=
 ldflags-y  :=
 
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
 # Read auto.conf if it exists, otherwise ignore
 -include include/config/auto.conf
 
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 9796195..cba61ca 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -4,6 +4,11 @@
 cppflags-y += $(EXTRA_CPPFLAGS)
 ldflags-y  += $(EXTRA_LDFLAGS)
 
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
 # Figure out what we need to build from the various variables
 # ===========================================================================
 
@@ -104,10 +109,10 @@
 debug_flags =
 endif
 
-orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)                     \
+orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
                  $(ccflags-y) $(CFLAGS_$(basetarget).o)
 _c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
-_a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS)                     \
+_a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
                  $(asflags-y) $(AFLAGS_$(basetarget).o)
 _cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
 
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 9215149..98b3195 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -609,8 +609,12 @@
 	    strcmp(name, XATTR_NAME_SMACKIPOUT) == 0) {
 		if (!capable(CAP_MAC_ADMIN))
 			rc = -EPERM;
-		/* a label cannot be void and cannot begin with '-' */
-		if (size == 0 || (size > 0 && ((char *)value)[0] == '-'))
+		/*
+		 * check label validity here so import wont fail on
+		 * post_setxattr
+		 */
+		if (size == 0 || size >= SMK_LABELLEN ||
+		    smk_import(value, size) == NULL)
 			rc = -EINVAL;
 	} else
 		rc = cap_inode_setxattr(dentry, name, value, size, flags);
@@ -644,9 +648,6 @@
 	if (strcmp(name, XATTR_NAME_SMACK))
 		return;
 
-	if (size >= SMK_LABELLEN)
-		return;
-
 	isp = dentry->d_inode->i_security;
 
 	/*
diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index 15500b9..84bb07d 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -47,7 +47,7 @@
 struct onyx {
 	/* cache registers 65 to 80, they are write-only! */
 	u8			cache[16];
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	struct aoa_codec	codec;
 	u32			initialised:1,
 				spdif_locked:1,
@@ -72,7 +72,7 @@
 		*value = onyx->cache[reg-FIRSTREGISTER];
 		return 0;
 	}
-	v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
+	v = i2c_smbus_read_byte_data(onyx->i2c, reg);
 	if (v < 0)
 		return -1;
 	*value = (u8)v;
@@ -84,7 +84,7 @@
 {
 	int result;
 
-	result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
+	result = i2c_smbus_write_byte_data(onyx->i2c, reg, value);
 	if (!result)
 		onyx->cache[reg-FIRSTREGISTER] = value;
 	return result;
@@ -996,12 +996,45 @@
 	onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
 }
 
-static struct i2c_driver onyx_driver;
-
 static int onyx_create(struct i2c_adapter *adapter,
 		       struct device_node *node,
 		       int addr)
 {
+	struct i2c_board_info info;
+	struct i2c_client *client;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE);
+	info.addr = addr;
+	info.platform_data = node;
+	client = i2c_new_device(adapter, &info);
+	if (!client)
+		return -ENODEV;
+
+	/*
+	 * We know the driver is already loaded, so the device should be
+	 * already bound. If not it means binding failed, which suggests
+	 * the device doesn't really exist and should be deleted.
+	 * Ideally this would be replaced by better checks _before_
+	 * instantiating the device.
+	 */
+	if (!client->driver) {
+		i2c_unregister_device(client);
+		return -ENODEV;
+	}
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return 0;
+}
+
+static int onyx_i2c_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct device_node *node = client->dev.platform_data;
 	struct onyx *onyx;
 	u8 dummy;
 
@@ -1011,20 +1044,12 @@
 		return -ENOMEM;
 
 	mutex_init(&onyx->mutex);
-	onyx->i2c.driver = &onyx_driver;
-	onyx->i2c.adapter = adapter;
-	onyx->i2c.addr = addr & 0x7f;
-	strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
-
-	if (i2c_attach_client(&onyx->i2c)) {
-		printk(KERN_ERR PFX "failed to attach to i2c\n");
-		goto fail;
-	}
+	onyx->i2c = client;
+	i2c_set_clientdata(client, onyx);
 
 	/* we try to read from register ONYX_REG_CONTROL
 	 * to check if the codec is present */
 	if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
-		i2c_detach_client(&onyx->i2c);
 		printk(KERN_ERR PFX "failed to read control register\n");
 		goto fail;
 	}
@@ -1036,14 +1061,14 @@
 	onyx->codec.node = of_node_get(node);
 
 	if (aoa_codec_register(&onyx->codec)) {
-		i2c_detach_client(&onyx->i2c);
 		goto fail;
 	}
 	printk(KERN_DEBUG PFX "created and attached onyx instance\n");
 	return 0;
  fail:
+	i2c_set_clientdata(client, NULL);
 	kfree(onyx);
-	return -EINVAL;
+	return -ENODEV;
 }
 
 static int onyx_i2c_attach(struct i2c_adapter *adapter)
@@ -1080,28 +1105,33 @@
 	return onyx_create(adapter, NULL, 0x47);
 }
 
-static int onyx_i2c_detach(struct i2c_client *client)
+static int onyx_i2c_remove(struct i2c_client *client)
 {
-	struct onyx *onyx = container_of(client, struct onyx, i2c);
-	int err;
+	struct onyx *onyx = i2c_get_clientdata(client);
 
-	if ((err = i2c_detach_client(client)))
-		return err;
 	aoa_codec_unregister(&onyx->codec);
 	of_node_put(onyx->codec.node);
 	if (onyx->codec_info)
 		kfree(onyx->codec_info);
+	i2c_set_clientdata(client, onyx);
 	kfree(onyx);
 	return 0;
 }
 
+static const struct i2c_device_id onyx_i2c_id[] = {
+	{ "aoa_codec_onyx", 0 },
+	{ }
+};
+
 static struct i2c_driver onyx_driver = {
 	.driver = {
 		.name = "aoa_codec_onyx",
 		.owner = THIS_MODULE,
 	},
 	.attach_adapter = onyx_i2c_attach,
-	.detach_client = onyx_i2c_detach,
+	.probe = onyx_i2c_probe,
+	.remove = onyx_i2c_remove,
+	.id_table = onyx_i2c_id,
 };
 
 static int __init onyx_init(void)
diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c
index 008e0f8..f0ebc971 100644
--- a/sound/aoa/codecs/tas.c
+++ b/sound/aoa/codecs/tas.c
@@ -82,7 +82,7 @@
 
 struct tas {
 	struct aoa_codec	codec;
-	struct i2c_client	i2c;
+	struct i2c_client	*i2c;
 	u32			mute_l:1, mute_r:1 ,
 				controls_created:1 ,
 				drc_enabled:1,
@@ -108,9 +108,9 @@
 static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data)
 {
 	if (len == 1)
-		return i2c_smbus_write_byte_data(&tas->i2c, reg, *data);
+		return i2c_smbus_write_byte_data(tas->i2c, reg, *data);
 	else
-		return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
+		return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data);
 }
 
 static void tas3004_set_drc(struct tas *tas)
@@ -882,12 +882,34 @@
 }
 
 
-static struct i2c_driver tas_driver;
-
 static int tas_create(struct i2c_adapter *adapter,
 		       struct device_node *node,
 		       int addr)
 {
+	struct i2c_board_info info;
+	struct i2c_client *client;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE);
+	info.addr = addr;
+	info.platform_data = node;
+
+	client = i2c_new_device(adapter, &info);
+	if (!client)
+		return -ENODEV;
+
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&client->detected, &client->driver->clients);
+	return 0;
+}
+
+static int tas_i2c_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device_node *node = client->dev.platform_data;
 	struct tas *tas;
 
 	tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
@@ -896,17 +918,11 @@
 		return -ENOMEM;
 
 	mutex_init(&tas->mtx);
-	tas->i2c.driver = &tas_driver;
-	tas->i2c.adapter = adapter;
-	tas->i2c.addr = addr;
+	tas->i2c = client;
+	i2c_set_clientdata(client, tas);
+
 	/* seems that half is a saner default */
 	tas->drc_range = TAS3004_DRC_MAX / 2;
-	strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
-
-	if (i2c_attach_client(&tas->i2c)) {
-		printk(KERN_ERR PFX "failed to attach to i2c\n");
-		goto fail;
-	}
 
 	strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
 	tas->codec.owner = THIS_MODULE;
@@ -915,14 +931,12 @@
 	tas->codec.node = of_node_get(node);
 
 	if (aoa_codec_register(&tas->codec)) {
-		goto detach;
+		goto fail;
 	}
 	printk(KERN_DEBUG
 	       "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
-	       addr, node->full_name);
+	       (unsigned int)client->addr, node->full_name);
 	return 0;
- detach:
-	i2c_detach_client(&tas->i2c);
  fail:
 	mutex_destroy(&tas->mtx);
 	kfree(tas);
@@ -970,14 +984,11 @@
 	return -ENODEV;
 }
 
-static int tas_i2c_detach(struct i2c_client *client)
+static int tas_i2c_remove(struct i2c_client *client)
 {
-	struct tas *tas = container_of(client, struct tas, i2c);
-	int err;
+	struct tas *tas = i2c_get_clientdata(client);
 	u8 tmp = TAS_ACR_ANALOG_PDOWN;
 
-	if ((err = i2c_detach_client(client)))
-		return err;
 	aoa_codec_unregister(&tas->codec);
 	of_node_put(tas->codec.node);
 
@@ -989,13 +1000,20 @@
 	return 0;
 }
 
+static const struct i2c_device_id tas_i2c_id[] = {
+	{ "aoa_codec_tas", 0 },
+	{ }
+};
+
 static struct i2c_driver tas_driver = {
 	.driver = {
 		.name = "aoa_codec_tas",
 		.owner = THIS_MODULE,
 	},
 	.attach_adapter = tas_i2c_attach,
-	.detach_client = tas_i2c_detach,
+	.probe = tas_i2c_probe,
+	.remove = tas_i2c_remove,
+	.id_table = tas_i2c_id,
 };
 
 static int __init tas_init(void)
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index 0afd1a8..a2c12d1 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -364,7 +364,7 @@
 int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
 {
 	int ret;
-	struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data;
+	pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
 
 	if (pdata) {
 		switch (pdata->reset_gpio) {
diff --git a/sound/core/control.c b/sound/core/control.c
index 4b20fa2..17b8d47 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -723,14 +723,11 @@
 {
 	struct snd_ctl_elem_value *control;
 	int result;
-	
-	control = kmalloc(sizeof(*control), GFP_KERNEL);
-	if (control == NULL)
-		return -ENOMEM;	
-	if (copy_from_user(control, _control, sizeof(*control))) {
-		kfree(control);
-		return -EFAULT;
-	}
+
+	control = memdup_user(_control, sizeof(*control));
+	if (IS_ERR(control))
+		return PTR_ERR(control);
+
 	snd_power_lock(card);
 	result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
 	if (result >= 0)
@@ -784,13 +781,10 @@
 	struct snd_card *card;
 	int result;
 
-	control = kmalloc(sizeof(*control), GFP_KERNEL);
-	if (control == NULL)
-		return -ENOMEM;	
-	if (copy_from_user(control, _control, sizeof(*control))) {
-		kfree(control);
-		return -EFAULT;
-	}
+	control = memdup_user(_control, sizeof(*control));
+	if (IS_ERR(control))
+		return PTR_ERR(control);
+
 	card = file->card;
 	snd_power_lock(card);
 	result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
@@ -916,13 +910,10 @@
 	if (op_flag > 0) {
 		if (size > 1024 * 128)	/* sane value */
 			return -EINVAL;
-		new_data = kmalloc(size, GFP_KERNEL);
-		if (new_data == NULL)
-			return -ENOMEM;
-		if (copy_from_user(new_data, tlv, size)) {
-			kfree(new_data);
-			return -EFAULT;
-		}
+
+		new_data = memdup_user(tlv, size);
+		if (IS_ERR(new_data))
+			return PTR_ERR(new_data);
 		change = ue->tlv_data_size != size;
 		if (!change)
 			change = memcmp(ue->tlv_data, new_data, size);
diff --git a/sound/core/jack.c b/sound/core/jack.c
index c8254c6..d54d1a0 100644
--- a/sound/core/jack.c
+++ b/sound/core/jack.c
@@ -35,6 +35,9 @@
 {
 	struct snd_jack *jack = device->device_data;
 
+	if (jack->private_free)
+		jack->private_free(jack);
+
 	/* If the input device is registered with the input subsystem
 	 * then we need to use a different deallocator. */
 	if (jack->registered)
diff --git a/sound/core/pcm_compat.c b/sound/core/pcm_compat.c
index 36d7a59..08bfed5 100644
--- a/sound/core/pcm_compat.c
+++ b/sound/core/pcm_compat.c
@@ -232,14 +232,11 @@
 	if (! (runtime = substream->runtime))
 		return -ENOTTY;
 
-	data = kmalloc(sizeof(*data), GFP_KERNEL);
-	if (data == NULL)
-		return -ENOMEM;
 	/* only fifo_size is different, so just copy all */
-	if (copy_from_user(data, data32, sizeof(*data32))) {
-		err = -EFAULT;
-		goto error;
-	}
+	data = memdup_user(data32, sizeof(*data32));
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
 	if (refine)
 		err = snd_pcm_hw_refine(substream, data);
 	else
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index fbb2e39..63d088f 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -209,9 +209,11 @@
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	snd_pcm_uframes_t pos;
-	snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base;
-	snd_pcm_sframes_t delta;
+	snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base;
+	snd_pcm_sframes_t hdelta, delta;
+	unsigned long jdelta;
 
+	old_hw_ptr = runtime->status->hw_ptr;
 	pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
 	if (pos == SNDRV_PCM_POS_XRUN) {
 		xrun(substream);
@@ -247,7 +249,30 @@
 			new_hw_ptr = hw_base + pos;
 		}
 	}
-	if (delta > runtime->period_size) {
+	hdelta = new_hw_ptr - old_hw_ptr;
+	jdelta = jiffies - runtime->hw_ptr_jiffies;
+	if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
+		delta = jdelta /
+			(((runtime->period_size * HZ) / runtime->rate)
+								+ HZ/100);
+		hw_ptr_error(substream,
+			     "hw_ptr skipping! [Q] "
+			     "(pos=%ld, delta=%ld, period=%ld, "
+			     "jdelta=%lu/%lu/%lu)\n",
+			     (long)pos, (long)hdelta,
+			     (long)runtime->period_size, jdelta,
+			     ((hdelta * HZ) / runtime->rate), delta);
+		hw_ptr_interrupt = runtime->hw_ptr_interrupt +
+				   runtime->period_size * delta;
+		if (hw_ptr_interrupt >= runtime->boundary)
+			hw_ptr_interrupt -= runtime->boundary;
+		/* rebase to interrupt position */
+		hw_base = new_hw_ptr = hw_ptr_interrupt;
+		/* align hw_base to buffer_size */
+		hw_base -= hw_base % runtime->buffer_size;
+		delta = 0;
+	}
+	if (delta > runtime->period_size + runtime->period_size / 2) {
 		hw_ptr_error(substream,
 			     "Lost interrupts? "
 			     "(stream=%i, delta=%ld, intr_ptr=%ld)\n",
@@ -263,6 +288,7 @@
 
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
+	runtime->hw_ptr_jiffies = jiffies;
 	runtime->hw_ptr_interrupt = hw_ptr_interrupt;
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
@@ -275,6 +301,7 @@
 	snd_pcm_uframes_t pos;
 	snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base;
 	snd_pcm_sframes_t delta;
+	unsigned long jdelta;
 
 	old_hw_ptr = runtime->status->hw_ptr;
 	pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
@@ -286,14 +313,15 @@
 	new_hw_ptr = hw_base + pos;
 
 	delta = new_hw_ptr - old_hw_ptr;
+	jdelta = jiffies - runtime->hw_ptr_jiffies;
 	if (delta < 0) {
 		delta += runtime->buffer_size;
 		if (delta < 0) {
 			hw_ptr_error(substream, 
 				     "Unexpected hw_pointer value [2] "
-				     "(stream=%i, pos=%ld, old_ptr=%ld)\n",
+				     "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n",
 				     substream->stream, (long)pos,
-				     (long)old_hw_ptr);
+				     (long)old_hw_ptr, jdelta);
 			return 0;
 		}
 		hw_base += runtime->buffer_size;
@@ -301,12 +329,13 @@
 			hw_base = 0;
 		new_hw_ptr = hw_base + pos;
 	}
-	if (delta > runtime->period_size && runtime->periods > 1) {
+	if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
 		hw_ptr_error(substream,
 			     "hw_ptr skipping! "
-			     "(pos=%ld, delta=%ld, period=%ld)\n",
+			     "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
 			     (long)pos, (long)delta,
-			     (long)runtime->period_size);
+			     (long)runtime->period_size, jdelta,
+			     ((delta * HZ) / runtime->rate));
 		return 0;
 	}
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
@@ -315,6 +344,7 @@
 
 	runtime->hw_ptr_base = hw_base;
 	runtime->status->hw_ptr = new_hw_ptr;
+	runtime->hw_ptr_jiffies = jiffies;
 
 	return snd_pcm_update_hw_ptr_post(substream, runtime);
 }
@@ -1441,6 +1471,7 @@
 		runtime->status->hw_ptr %= runtime->buffer_size;
 	else
 		runtime->status->hw_ptr = 0;
+	runtime->hw_ptr_jiffies = jiffies;
 	snd_pcm_stream_unlock_irqrestore(substream, flags);
 	return 0;
 }
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index a151fb0..fc6f98e 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -327,21 +327,16 @@
 	struct snd_pcm_hw_params *params;
 	int err;
 
-	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(params, _params, sizeof(*params))) {
-		err = -EFAULT;
-		goto out;
-	}
+	params = memdup_user(_params, sizeof(*params));
+	if (IS_ERR(params))
+		return PTR_ERR(params);
+
 	err = snd_pcm_hw_refine(substream, params);
 	if (copy_to_user(_params, params, sizeof(*params))) {
 		if (!err)
 			err = -EFAULT;
 	}
-out:
+
 	kfree(params);
 	return err;
 }
@@ -465,21 +460,16 @@
 	struct snd_pcm_hw_params *params;
 	int err;
 
-	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(params, _params, sizeof(*params))) {
-		err = -EFAULT;
-		goto out;
-	}
+	params = memdup_user(_params, sizeof(*params));
+	if (IS_ERR(params))
+		return PTR_ERR(params);
+
 	err = snd_pcm_hw_params(substream, params);
 	if (copy_to_user(_params, params, sizeof(*params))) {
 		if (!err)
 			err = -EFAULT;
 	}
-out:
+
 	kfree(params);
 	return err;
 }
@@ -2593,13 +2583,11 @@
 			return -EFAULT;
 		if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
 			return -EFAULT;
-		bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
-		if (bufs == NULL)
-			return -ENOMEM;
-		if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
-			kfree(bufs);
-			return -EFAULT;
-		}
+
+		bufs = memdup_user(xfern.bufs,
+				   sizeof(void *) * runtime->channels);
+		if (IS_ERR(bufs))
+			return PTR_ERR(bufs);
 		result = snd_pcm_lib_writev(substream, bufs, xfern.frames);
 		kfree(bufs);
 		__put_user(result, &_xfern->result);
@@ -2675,13 +2663,11 @@
 			return -EFAULT;
 		if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
 			return -EFAULT;
-		bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
-		if (bufs == NULL)
-			return -ENOMEM;
-		if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
-			kfree(bufs);
-			return -EFAULT;
-		}
+
+		bufs = memdup_user(xfern.bufs,
+				   sizeof(void *) * runtime->channels);
+		if (IS_ERR(bufs))
+			return PTR_ERR(bufs);
 		result = snd_pcm_lib_readv(substream, bufs, xfern.frames);
 		kfree(bufs);
 		__put_user(result, &_xfern->result);
@@ -3312,18 +3298,12 @@
 	int err;
 
 	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
-	if (!oparams) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!params)
+		return -ENOMEM;
 
-	if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
-		err = -EFAULT;
+	oparams = memdup_user(_oparams, sizeof(*oparams));
+	if (IS_ERR(oparams)) {
+		err = PTR_ERR(oparams);
 		goto out;
 	}
 	snd_pcm_hw_convert_from_old_params(params, oparams);
@@ -3333,9 +3313,10 @@
 		if (!err)
 			err = -EFAULT;
 	}
+
+	kfree(oparams);
 out:
 	kfree(params);
-	kfree(oparams);
 	return err;
 }
 
@@ -3347,17 +3328,12 @@
 	int err;
 
 	params = kmalloc(sizeof(*params), GFP_KERNEL);
-	if (!params) {
-		err = -ENOMEM;
-		goto out;
-	}
-	oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
-	if (!oparams) {
-		err = -ENOMEM;
-		goto out;
-	}
-	if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
-		err = -EFAULT;
+	if (!params)
+		return -ENOMEM;
+
+	oparams = memdup_user(_oparams, sizeof(*oparams));
+	if (IS_ERR(oparams)) {
+		err = PTR_ERR(oparams);
 		goto out;
 	}
 	snd_pcm_hw_convert_from_old_params(params, oparams);
@@ -3367,9 +3343,10 @@
 		if (!err)
 			err = -EFAULT;
 	}
+
+	kfree(oparams);
 out:
 	kfree(params);
-	kfree(oparams);
 	return err;
 }
 #endif /* CONFIG_SND_SUPPORT_OLD_API */
diff --git a/sound/core/seq/seq_compat.c b/sound/core/seq/seq_compat.c
index 38693f4..c956fe4 100644
--- a/sound/core/seq/seq_compat.c
+++ b/sound/core/seq/seq_compat.c
@@ -48,12 +48,11 @@
 	struct snd_seq_port_info *data;
 	mm_segment_t fs;
 
-	data = kmalloc(sizeof(*data), GFP_KERNEL);
-	if (! data)
-		return -ENOMEM;
+	data = memdup_user(data32, sizeof(*data32));
+	if (IS_ERR(data))
+		return PTR_ERR(data);
 
-	if (copy_from_user(data, data32, sizeof(*data32)) ||
-	    get_user(data->flags, &data32->flags) ||
+	if (get_user(data->flags, &data32->flags) ||
 	    get_user(data->time_queue, &data32->time_queue))
 		goto error;
 	data->kernel = NULL;
diff --git a/sound/core/timer.c b/sound/core/timer.c
index 3f0050d..8f8b17a 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -1395,13 +1395,10 @@
 	struct list_head *p;
 	int err = 0;
 
-	ginfo = kmalloc(sizeof(*ginfo), GFP_KERNEL);
-	if (! ginfo)
-		return -ENOMEM;
-	if (copy_from_user(ginfo, _ginfo, sizeof(*ginfo))) {
-		kfree(ginfo);
-		return -EFAULT;
-	}
+	ginfo = memdup_user(_ginfo, sizeof(*ginfo));
+	if (IS_ERR(ginfo))
+		return PTR_ERR(ginfo);
+
 	tid = ginfo->tid;
 	memset(ginfo, 0, sizeof(*ginfo));
 	ginfo->tid = tid;
diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index 49037d0..bdc8dde 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -684,15 +684,16 @@
  
 static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags)
 {
-	int err = -ENOMEM;
-	unsigned char *kbuf = kmalloc(size, GFP_KERNEL);
-	if (kbuf) {
-		if (copy_from_user(kbuf, buf, size))
-			err = -EFAULT;
-		else
-			err = snd_sb_csp_load(p, kbuf, size, load_flags);
-		kfree(kbuf);
-	}
+	int err;
+	unsigned char *kbuf;
+
+	kbuf = memdup_user(buf, size);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	err = snd_sb_csp_load(p, kbuf, size, load_flags);
+
+	kfree(kbuf);
 	return err;
 }
 
diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
index a4345fc..2bb1cee 100644
--- a/sound/isa/wavefront/wavefront_fx.c
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -202,15 +202,11 @@
 					    "> 512 bytes to FX\n");
 				return -EIO;
 			}
-			page_data = kmalloc(r.data[2] * sizeof(short), GFP_KERNEL);
-			if (!page_data)
-				return -ENOMEM;
-			if (copy_from_user (page_data,
-					    (unsigned char __user *) r.data[3],
-					    r.data[2] * sizeof(short))) {
-				kfree(page_data);
-				return -EFAULT;
-			}
+			page_data = memdup_user((unsigned char __user *)
+						r.data[3],
+						r.data[2] * sizeof(short));
+			if (IS_ERR(page_data))
+				return PTR_ERR(page_data);
 			pd = page_data;
 		}
 
diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
index beb312c..5d4ff48 100644
--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -1664,12 +1664,11 @@
 		break;
 
 	case WFCTL_WFCMD:
-		wc = kmalloc(sizeof(*wc), GFP_KERNEL);
-		if (! wc)
-			return -ENOMEM;
-		if (copy_from_user (wc, argp, sizeof (*wc)))
-			err = -EFAULT;
-		else if (wavefront_synth_control (acard, wc) < 0)
+		wc = memdup_user(argp, sizeof(*wc));
+		if (IS_ERR(wc))
+			return PTR_ERR(wc);
+
+		if (wavefront_synth_control (acard, wc) < 0)
 			err = -EIO;
 		else if (copy_to_user (argp, wc, sizeof (*wc)))
 			err = -EFAULT;
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 97ee127..78288db 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -2122,7 +2122,7 @@
 		}
 		/* nothing should be in powerdown mode */
 		snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0);
-		end_time = jiffies + msecs_to_jiffies(100);
+		end_time = jiffies + msecs_to_jiffies(120);
 		do {
 			if ((snd_ac97_read(ac97, AC97_POWERDOWN) & 0x0f) == 0x0f)
 				goto __ready_ok;
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 9ce8548..71515dd 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -1393,6 +1393,12 @@
 		.name = "HP nx6125",
 		.type = AC97_TUNE_MUTE_LED
 	},
+	{
+		.subvendor = 0x103c,
+		.subdevice = 0x3091,
+		.name = "unknown HP",
+		.type = AC97_TUNE_MUTE_LED
+	},
 	{ } /* terminator */
 };
 
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index c7899c3..449fe02 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -3014,7 +3014,7 @@
 		.dev_free =	snd_cmipci_dev_free,
 	};
 	unsigned int val;
-	long iomidi;
+	long iomidi = 0;
 	int integrated_midi = 0;
 	char modelstr[16];
 	int pcm_index, pcm_spdif_index;
diff --git a/sound/pci/emu10k1/emufx.c b/sound/pci/emu10k1/emufx.c
index 191e1cd..4b302d8 100644
--- a/sound/pci/emu10k1/emufx.c
+++ b/sound/pci/emu10k1/emufx.c
@@ -2493,24 +2493,17 @@
 	case SNDRV_EMU10K1_IOCTL_CODE_POKE:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		icode = kmalloc(sizeof(*icode), GFP_KERNEL);
-		if (icode == NULL)
-			return -ENOMEM;
-		if (copy_from_user(icode, argp, sizeof(*icode))) {
-			kfree(icode);
-			return -EFAULT;
-		}
+
+		icode = memdup_user(argp, sizeof(*icode));
+		if (IS_ERR(icode))
+			return PTR_ERR(icode);
 		res = snd_emu10k1_icode_poke(emu, icode);
 		kfree(icode);
 		return res;
 	case SNDRV_EMU10K1_IOCTL_CODE_PEEK:
-		icode = kmalloc(sizeof(*icode), GFP_KERNEL);
-		if (icode == NULL)
-			return -ENOMEM;
-		if (copy_from_user(icode, argp, sizeof(*icode))) {
-			kfree(icode);
-			return -EFAULT;
-		}
+		icode = memdup_user(argp, sizeof(*icode));
+		if (IS_ERR(icode))
+			return PTR_ERR(icode);
 		res = snd_emu10k1_icode_peek(emu, icode);
 		if (res == 0 && copy_to_user(argp, icode, sizeof(*icode))) {
 			kfree(icode);
@@ -2519,24 +2512,16 @@
 		kfree(icode);
 		return res;
 	case SNDRV_EMU10K1_IOCTL_PCM_POKE:
-		ipcm = kmalloc(sizeof(*ipcm), GFP_KERNEL);
-		if (ipcm == NULL)
-			return -ENOMEM;
-		if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
-			kfree(ipcm);
-			return -EFAULT;
-		}
+		ipcm = memdup_user(argp, sizeof(*ipcm));
+		if (IS_ERR(ipcm))
+			return PTR_ERR(ipcm);
 		res = snd_emu10k1_ipcm_poke(emu, ipcm);
 		kfree(ipcm);
 		return res;
 	case SNDRV_EMU10K1_IOCTL_PCM_PEEK:
-		ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL);
-		if (ipcm == NULL)
-			return -ENOMEM;
-		if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
-			kfree(ipcm);
-			return -EFAULT;
-		}
+		ipcm = memdup_user(argp, sizeof(*ipcm));
+		if (IS_ERR(ipcm))
+			return PTR_ERR(ipcm);
 		res = snd_emu10k1_ipcm_peek(emu, ipcm);
 		if (res == 0 && copy_to_user(argp, ipcm, sizeof(*ipcm))) {
 			kfree(ipcm);
diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c
index 4bfc31d..c1a5aa1 100644
--- a/sound/pci/emu10k1/io.c
+++ b/sound/pci/emu10k1/io.c
@@ -490,7 +490,7 @@
 			if (newtime != curtime)
 				break;
 		}
-		if (count >= 16384)
+		if (count > 16384)
 			break;
 		curtime = newtime;
 	}
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index a4e5e59..8820faf 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -642,19 +642,21 @@
  */
 static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
 {
-	int i, total_nodes;
+	int i, total_nodes, function_id;
 	hda_nid_t nid;
 
 	total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
 	for (i = 0; i < total_nodes; i++, nid++) {
-		codec->function_id = snd_hda_param_read(codec, nid,
+		function_id = snd_hda_param_read(codec, nid,
 						AC_PAR_FUNCTION_TYPE) & 0xff;
-		switch (codec->function_id) {
+		switch (function_id) {
 		case AC_GRP_AUDIO_FUNCTION:
 			codec->afg = nid;
+			codec->function_id = function_id;
 			break;
 		case AC_GRP_MODEM_FUNCTION:
 			codec->mfg = nid;
+			codec->function_id = function_id;
 			break;
 		default:
 			break;
@@ -2250,7 +2252,11 @@
 	err = bus->ops.command(bus, res);
 	if (!err) {
 		struct hda_cache_head *c;
-		u32 key = build_cmd_cache_key(nid, verb);
+		u32 key;
+		/* parm may contain the verb stuff for get/set amp */
+		verb = verb | (parm >> 8);
+		parm &= 0xff;
+		key = build_cmd_cache_key(nid, verb);
 		c = get_alloc_hash(&codec->cmd_cache, key);
 		if (c)
 			c->val = parm;
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 7ba8db5..21e99cf 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -312,6 +312,8 @@
 	unsigned int period_bytes; /* size of the period in bytes */
 	unsigned int frags;	/* number for period in the play buffer */
 	unsigned int fifo_size;	/* FIFO size */
+	unsigned long start_jiffies;	/* start + minimum jiffies */
+	unsigned long min_jiffies;	/* minimum jiffies before position is valid */
 
 	void __iomem *sd_addr;	/* stream descriptor pointer */
 
@@ -330,7 +332,7 @@
 	unsigned int opened :1;
 	unsigned int running :1;
 	unsigned int irq_pending :1;
-	unsigned int irq_ignore :1;
+	unsigned int start_flag: 1;	/* stream full start flag */
 	/*
 	 * For VIA:
 	 *  A flag to ensure DMA position is 0
@@ -975,7 +977,7 @@
 	struct azx *chip = dev_id;
 	struct azx_dev *azx_dev;
 	u32 status;
-	int i;
+	int i, ok;
 
 	spin_lock(&chip->reg_lock);
 
@@ -991,18 +993,14 @@
 			azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
 			if (!azx_dev->substream || !azx_dev->running)
 				continue;
-			/* ignore the first dummy IRQ (due to pos_adj) */
-			if (azx_dev->irq_ignore) {
-				azx_dev->irq_ignore = 0;
-				continue;
-			}
 			/* check whether this IRQ is really acceptable */
-			if (azx_position_ok(chip, azx_dev)) {
+			ok = azx_position_ok(chip, azx_dev);
+			if (ok == 1) {
 				azx_dev->irq_pending = 0;
 				spin_unlock(&chip->reg_lock);
 				snd_pcm_period_elapsed(azx_dev->substream);
 				spin_lock(&chip->reg_lock);
-			} else if (chip->bus && chip->bus->workq) {
+			} else if (ok == 0 && chip->bus && chip->bus->workq) {
 				/* bogus IRQ, process it later */
 				azx_dev->irq_pending = 1;
 				queue_work(chip->bus->workq,
@@ -1088,7 +1086,6 @@
 	bdl = (u32 *)azx_dev->bdl.area;
 	ofs = 0;
 	azx_dev->frags = 0;
-	azx_dev->irq_ignore = 0;
 	pos_adj = bdl_pos_adj[chip->dev_index];
 	if (pos_adj > 0) {
 		struct snd_pcm_runtime *runtime = substream->runtime;
@@ -1109,7 +1106,6 @@
 					 &bdl, ofs, pos_adj, 1);
 			if (ofs < 0)
 				goto error;
-			azx_dev->irq_ignore = 1;
 		}
 	} else
 		pos_adj = 0;
@@ -1155,6 +1151,9 @@
 	while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
 	       --timeout)
 		;
+
+	/* reset first position - may not be synced with hw at this time */
+	*azx_dev->posbuf = 0;
 }
 
 /*
@@ -1409,7 +1408,6 @@
 	snd_pcm_set_sync(substream);
 	mutex_unlock(&chip->open_mutex);
 
-	azx_stream_reset(chip, azx_dev);
 	return 0;
 }
 
@@ -1474,6 +1472,7 @@
 	unsigned int bufsize, period_bytes, format_val;
 	int err;
 
+	azx_stream_reset(chip, azx_dev);
 	format_val = snd_hda_calc_stream_format(runtime->rate,
 						runtime->channels,
 						runtime->format,
@@ -1502,6 +1501,8 @@
 			return err;
 	}
 
+	azx_dev->min_jiffies = (runtime->period_size * HZ) /
+						(runtime->rate * 2);
 	azx_setup_controller(chip, azx_dev);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1;
@@ -1518,13 +1519,14 @@
 	struct azx *chip = apcm->chip;
 	struct azx_dev *azx_dev;
 	struct snd_pcm_substream *s;
-	int start, nsync = 0, sbits = 0;
+	int rstart = 0, start, nsync = 0, sbits = 0;
 	int nwait, timeout;
 
 	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		rstart = 1;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_START:
 		start = 1;
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -1554,6 +1556,10 @@
 		if (s->pcm->card != substream->pcm->card)
 			continue;
 		azx_dev = get_azx_dev(s);
+		if (rstart) {
+			azx_dev->start_flag = 1;
+			azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies;
+		}
 		if (start)
 			azx_stream_start(chip, azx_dev);
 		else
@@ -1703,6 +1709,11 @@
 {
 	unsigned int pos;
 
+	if (azx_dev->start_flag &&
+	    time_before_eq(jiffies, azx_dev->start_jiffies))
+		return -1;	/* bogus (too early) interrupt */
+	azx_dev->start_flag = 0;
+
 	pos = azx_get_position(chip, azx_dev);
 	if (chip->position_fix == POS_FIX_AUTO) {
 		if (!pos) {
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 38ad3f7..84cc49c 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3817,6 +3817,49 @@
 	{ } /* end */
 };
 
+static struct hda_verb ad1884a_mobile_verbs[] = {
+	/* DACs; unmute as default */
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	/* Port-A (HP) mixer - route only from analog mixer */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-A pin */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Port-A (HP) pin - always unmuted */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Port-B (mic jack) pin */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+	/* Port-C (int mic) pin */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+	/* Port-F (int speaker) mixer - route only from analog mixer */
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-F pin */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Analog mixer; mute as default */
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+	/* Analog Mix output amp */
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* capture sources */
+	/* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* unsolicited event for pin-sense */
+	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+	{ } /* end */
+};
+
 /*
  * Thinkpad X300
  * 0x11 - HP
@@ -3977,10 +4020,18 @@
 		spec->input_mux = &ad1884a_laptop_capture_source;
 		codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
 		codec->patch_ops.init = ad1884a_hp_init;
+		/* set the upper-limit for mixer amp to 0dB for avoiding the
+		 * possible damage by overloading
+		 */
+		snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+					  (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+					  (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+					  (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+					  (1 << AC_AMPCAP_MUTE_SHIFT));
 		break;
 	case AD1884A_MOBILE:
 		spec->mixers[0] = ad1884a_mobile_mixers;
-		spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
+		spec->init_verbs[0] = ad1884a_mobile_verbs;
 		spec->multiout.dig_out_nid = 0;
 		codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
 		codec->patch_ops.init = ad1884a_hp_init;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 1f2ad76..56ce19e 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -350,12 +350,20 @@
 }
 
 #ifdef CONFIG_SND_JACK
+static void conexant_free_jack_priv(struct snd_jack *jack)
+{
+	struct conexant_jack *jacks = jack->private_data;
+	jacks->nid = 0;
+	jacks->jack = NULL;
+}
+
 static int conexant_add_jack(struct hda_codec *codec,
 		hda_nid_t nid, int type)
 {
 	struct conexant_spec *spec;
 	struct conexant_jack *jack;
 	const char *name;
+	int err;
 
 	spec = codec->spec;
 	snd_array_init(&spec->jacks, sizeof(*jack), 32);
@@ -368,7 +376,12 @@
 	jack->nid = nid;
 	jack->type = type;
 
-	return snd_jack_new(codec->bus->card, name, type, &jack->jack);
+	err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+	if (err < 0)
+		return err;
+	jack->jack->private_data = jack;
+	jack->jack->private_free = conexant_free_jack_priv;
+	return 0;
 }
 
 static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid)
@@ -455,8 +468,10 @@
 	if (spec->jacks.list) {
 		struct conexant_jack *jacks = spec->jacks.list;
 		int i;
-		for (i = 0; i < spec->jacks.used; i++)
-			snd_device_free(codec->bus->card, &jacks[i].jack);
+		for (i = 0; i < spec->jacks.used; i++, jacks++) {
+			if (jacks->jack)
+				snd_device_free(codec->bus->card, jacks->jack);
+		}
 		snd_array_free(&spec->jacks);
 	}
 #endif
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index f35e58a..b8a0d3e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -188,6 +188,8 @@
 	ALC663_ASUS_MODE4,
 	ALC663_ASUS_MODE5,
 	ALC663_ASUS_MODE6,
+	ALC272_DELL,
+	ALC272_DELL_ZM1,
 	ALC662_AUTO,
 	ALC662_MODEL_LAST,
 };
@@ -8742,10 +8744,9 @@
 	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
 	SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
-	SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550",
+	SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx",
 		      ALC883_FUJITSU_PI2515),
-	SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515),
-	SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530",
+	SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1130, "Fujitsu AMILO Xa35xx",
 		ALC888_FUJITSU_XA3530),
 	SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch),
 	SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
@@ -12977,10 +12978,17 @@
 	SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
 	SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
 		      ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703),
+        SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703),
 	SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
 		      ALC269_ASUS_EEEPC_P901),
 	SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
 		      ALC269_ASUS_EEEPC_P901),
+        SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901),
 	SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
 	SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
 	{}
@@ -15211,12 +15219,23 @@
 	0x02, 0x03, 0x04
 };
 
+static hda_nid_t alc272_dac_nids[2] = {
+	0x02, 0x03
+};
+
 static hda_nid_t alc662_adc_nids[1] = {
 	/* ADC1-2 */
 	0x09,
 };
 
+static hda_nid_t alc272_adc_nids[1] = {
+	/* ADC1-2 */
+	0x08,
+};
+
 static hda_nid_t alc662_capsrc_nids[1] = { 0x22 };
+static hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
+
 
 /* input MUX */
 /* FIXME: should be a matrix-type input source selection */
@@ -15642,14 +15661,7 @@
 	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
 	/* Input mixer */
 	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
 	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
 
 	/* always trun on EAPD */
 	{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
@@ -15844,12 +15856,48 @@
 	{}
 };
 
+static struct hda_verb alc272_dell_zm1_init_verbs[] = {
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x21, AC_VERB_SET_CONNECT_SEL, 0x01},	/* Headphone */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
+static struct hda_verb alc272_dell_init_verbs[] = {
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x21, AC_VERB_SET_CONNECT_SEL, 0x01},	/* Headphone */
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+	{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{}
+};
+
 static struct snd_kcontrol_new alc662_auto_capture_mixer[] = {
 	HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc272_auto_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
 static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
 {
 	unsigned int present;
@@ -16361,6 +16409,8 @@
 
 static struct snd_pci_quirk alc662_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
+	SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL),
+	SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1),
 	SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
 	SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
@@ -16373,26 +16423,36 @@
 	SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
 	SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
 	SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA),
+	SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
 	SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
 	SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA),
 	/*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/
 	SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
 	SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V),
 	/*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/
 	SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA),
 	SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
 	SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG),
@@ -16404,6 +16464,7 @@
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
 	SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
 	SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0",
 					ALC662_3ST_6ch_DIG),
@@ -16641,6 +16702,36 @@
 		.unsol_event = alc663_mode6_unsol_event,
 		.init_hook = alc663_mode6_inithook,
 	},
+	[ALC272_DELL] = {
+		.mixers = { alc663_m51va_mixer },
+		.cap_mixer = alc272_auto_capture_mixer,
+		.init_verbs = { alc662_init_verbs, alc272_dell_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc272_dac_nids),
+		.dac_nids = alc662_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+		.adc_nids = alc272_adc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
+		.capsrc_nids = alc272_capsrc_nids,
+		.channel_mode = alc662_3ST_2ch_modes,
+		.input_mux = &alc663_m51va_capture_source,
+		.unsol_event = alc663_m51va_unsol_event,
+		.init_hook = alc663_m51va_inithook,
+	},
+	[ALC272_DELL_ZM1] = {
+		.mixers = { alc663_m51va_mixer },
+		.cap_mixer = alc662_auto_capture_mixer,
+		.init_verbs = { alc662_init_verbs, alc272_dell_zm1_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc272_dac_nids),
+		.dac_nids = alc662_dac_nids,
+		.num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+		.adc_nids = alc662_adc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+		.capsrc_nids = alc662_capsrc_nids,
+		.channel_mode = alc662_3ST_2ch_modes,
+		.input_mux = &alc663_m51va_capture_source,
+		.unsol_event = alc663_m51va_unsol_event,
+		.init_hook = alc663_m51va_inithook,
+	},
 };
 
 
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 61996a2..917bc5d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3076,6 +3076,11 @@
 	unsigned int wid_caps;
 
 	for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) {
+		if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
+			wid_caps = get_wcaps(codec, pins[i]);
+			if (wid_caps & AC_WCAP_UNSOL_CAP)
+				spec->hp_detect = 1;
+		}
 		nid = dac_nids[i];
 		if (!nid)
 			continue;
@@ -3119,11 +3124,6 @@
 			err = create_controls_idx(codec, name, idx, nid, 3);
 			if (err < 0)
 				return err;
-			if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
-				wid_caps = get_wcaps(codec, pins[i]);
-				if (wid_caps & AC_WCAP_UNSOL_CAP)
-					spec->hp_detect = 1;
-			}
 		}
 	}
 	return 0;
@@ -3851,6 +3851,15 @@
 			   AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
 }
 
+#ifdef CONFIG_SND_JACK
+static void stac92xx_free_jack_priv(struct snd_jack *jack)
+{
+	struct sigmatel_jack *jacks = jack->private_data;
+	jacks->nid = 0;
+	jacks->jack = NULL;
+}
+#endif
+
 static int stac92xx_add_jack(struct hda_codec *codec,
 		hda_nid_t nid, int type)
 {
@@ -3860,6 +3869,7 @@
 	int def_conf = snd_hda_codec_get_pincfg(codec, nid);
 	int connectivity = get_defcfg_connect(def_conf);
 	char name[32];
+	int err;
 
 	if (connectivity && connectivity != AC_JACK_PORT_FIXED)
 		return 0;
@@ -3876,10 +3886,15 @@
 		snd_hda_get_jack_connectivity(def_conf),
 		snd_hda_get_jack_location(def_conf));
 
-	return snd_jack_new(codec->bus->card, name, type, &jack->jack);
-#else
-	return 0;
+	err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+	if (err < 0) {
+		jack->nid = 0;
+		return err;
+	}
+	jack->jack->private_data = jack;
+	jack->jack->private_free = stac92xx_free_jack_priv;
 #endif
+	return 0;
 }
 
 static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid,
@@ -4138,8 +4153,10 @@
 	if (!codec->bus->shutdown && spec->jacks.list) {
 		struct sigmatel_jack *jacks = spec->jacks.list;
 		int i;
-		for (i = 0; i < spec->jacks.used; i++)
-			snd_device_free(codec->bus->card, &jacks[i].jack);
+		for (i = 0; i < spec->jacks.used; i++, jacks++) {
+			if (jacks->jack)
+				snd_device_free(codec->bus->card, jacks->jack);
+		}
 	}
 	snd_array_free(&spec->jacks);
 #endif
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 5764881..173bebf 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -355,6 +355,9 @@
         unsigned int fragsize1;
         unsigned int position;
 	unsigned int pos_shift;
+	unsigned int last_pos;
+	unsigned long last_pos_jiffies;
+	unsigned int jiffy_to_bytes;
         int frags;
         int lvi;
         int lvi_frag;
@@ -838,7 +841,10 @@
 		ichdev->suspended = 0;
 		/* fallthru */
 	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		val = ICH_IOCE | ICH_STARTBM;
+		ichdev->last_pos = ichdev->position;
+		ichdev->last_pos_jiffies = jiffies;
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		ichdev->suspended = 1;
@@ -849,9 +855,6 @@
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		val = ICH_IOCE;
 		break;
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		val = ICH_IOCE | ICH_STARTBM;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -1045,6 +1048,7 @@
 			ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
+	ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
 	return 0;
 }
 
@@ -1053,7 +1057,7 @@
 	struct intel8x0 *chip = snd_pcm_substream_chip(substream);
 	struct ichdev *ichdev = get_ichdev(substream);
 	size_t ptr1, ptr;
-	int civ, timeout = 100;
+	int civ, timeout = 10;
 	unsigned int position;
 
 	spin_lock(&chip->reg_lock);
@@ -1069,9 +1073,19 @@
 		    ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
 			break;
 	} while (timeout--);
-	ptr1 <<= ichdev->pos_shift;
-	ptr = ichdev->fragsize1 - ptr1;
-	ptr += position;
+	if (ptr1 != 0) {
+		ptr1 <<= ichdev->pos_shift;
+		ptr = ichdev->fragsize1 - ptr1;
+		ptr += position;
+		ichdev->last_pos = ptr;
+		ichdev->last_pos_jiffies = jiffies;
+	} else {
+		ptr1 = jiffies - ichdev->last_pos_jiffies;
+		if (ptr1)
+			ptr1 -= 1;
+		ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
+		ptr %= ichdev->size;
+	}
 	spin_unlock(&chip->reg_lock);
 	if (ptr >= ichdev->size)
 		return 0;
@@ -1840,6 +1854,12 @@
 	},
 	{
 		.subvendor = 0x1028,
+		.subdevice = 0x016a,
+		.name = "Dell Inspiron 8600",	/* STAC9750/51 */
+		.type = AC97_TUNE_HP_ONLY
+	},
+	{
+		.subvendor = 0x1028,
 		.subdevice = 0x0186,
 		.name = "Dell Latitude D810", /* cf. Malone #41015 */
 		.type = AC97_TUNE_HP_MUTE_LED
@@ -1882,12 +1902,6 @@
 	},
 	{
 		.subvendor = 0x103c,
-		.subdevice = 0x0934,
-		.name = "HP nx8220",
-		.type = AC97_TUNE_MUTE_LED
-	},
-	{
-		.subvendor = 0x103c,
 		.subdevice = 0x129d,
 		.name = "HP xw8000",
 		.type = AC97_TUNE_HP_ONLY
@@ -2661,12 +2675,14 @@
 	struct snd_pcm_substream *subs;
 	struct ichdev *ichdev;
 	unsigned long port;
-	unsigned long pos, t;
-	struct timeval start_time, stop_time;
+	unsigned long pos, pos1, t;
+	int civ, timeout = 1000, attempt = 1;
+	struct timespec start_time, stop_time;
 
 	if (chip->ac97_bus->clock != 48000)
 		return; /* specified in module option */
 
+      __again:
 	subs = chip->pcm[0]->streams[0].substream;
 	if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
 		snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
@@ -2674,7 +2690,7 @@
 	}
 	ichdev = &chip->ichd[ICHD_PCMOUT];
 	ichdev->physbuf = subs->dma_buffer.addr;
-	ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE;
+	ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE;
 	ichdev->substream = NULL; /* don't process interrupts */
 
 	/* set rate */
@@ -2693,16 +2709,31 @@
 		iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE);
 		iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot);
 	}
-	do_gettimeofday(&start_time);
+	do_posix_clock_monotonic_gettime(&start_time);
 	spin_unlock_irq(&chip->reg_lock);
 	msleep(50);
 	spin_lock_irq(&chip->reg_lock);
 	/* check the position */
-	pos = ichdev->fragsize1;
-	pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift;
-	pos += ichdev->position;
+	do {
+		civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV);
+		pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb);
+		if (pos1 == 0) {
+			udelay(10);
+			continue;
+		}
+		if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
+		    pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+			break;
+	} while (timeout--);
+	if (pos1 == 0) {	/* oops, this value is not reliable */
+		pos = 0;
+	} else {
+		pos = ichdev->fragsize1;
+		pos -= pos1 << ichdev->pos_shift;
+		pos += ichdev->position;
+	}
 	chip->in_measurement = 0;
-	do_gettimeofday(&stop_time);
+	do_posix_clock_monotonic_gettime(&stop_time);
 	/* stop */
 	if (chip->device_type == DEVICE_ALI) {
 		iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16));
@@ -2717,22 +2748,42 @@
 	iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS);
 	spin_unlock_irq(&chip->reg_lock);
 
+	if (pos == 0) {
+		snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
+	      __retry:
+		if (attempt < 3) {
+			msleep(300);
+			attempt++;
+			goto __again;
+		}
+		goto __end;
+	}
+
+	pos /= 4;
 	t = stop_time.tv_sec - start_time.tv_sec;
 	t *= 1000000;
-	t += stop_time.tv_usec - start_time.tv_usec;
-	printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t);
+	t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000;
+	printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
 	if (t == 0) {
-		snd_printk(KERN_ERR "?? calculation error..\n");
-		return;
+		snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
+		goto __retry;
 	}
-	pos = (pos / 4) * 1000;
+	pos *= 1000;
 	pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
-	if (pos < 40000 || pos >= 60000) 
+	if (pos < 40000 || pos >= 60000) {
 		/* abnormal value. hw problem? */
 		printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
+		goto __retry;
+	} else if (pos > 40500 && pos < 41500)
+		/* first exception - 41000Hz reference clock */
+		chip->ac97_bus->clock = 41000;
+	else if (pos > 43600 && pos < 44600)
+		/* second exception - 44100HZ reference clock */
+		chip->ac97_bus->clock = 44100;
 	else if (pos < 47500 || pos > 48500)
 		/* not 48000Hz, tuning the clock.. */
 		chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
+      __end:
 	printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
 	snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
 }
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 6ff99ed..a5afb26 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -33,26 +33,25 @@
 static struct pmac_keywest *keywest_ctx;
 
 
-static int keywest_attach_adapter(struct i2c_adapter *adapter);
-static int keywest_detach_client(struct i2c_client *client);
-
-struct i2c_driver keywest_driver = {  
-	.driver = {
-		.name = "PMac Keywest Audio",
-	},
-	.attach_adapter = &keywest_attach_adapter,
-	.detach_client = &keywest_detach_client,
-};
-
-
 #ifndef i2c_device_name
 #define i2c_device_name(x)	((x)->name)
 #endif
 
+static int keywest_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	i2c_set_clientdata(client, keywest_ctx);
+	return 0;
+}
+
+/*
+ * This is kind of a hack, best would be to turn powermac to fixed i2c
+ * bus numbers and declare the sound device as part of platform
+ * initialization
+ */
 static int keywest_attach_adapter(struct i2c_adapter *adapter)
 {
-	int err;
-	struct i2c_client *new_client;
+	struct i2c_board_info info;
 
 	if (! keywest_ctx)
 		return -EINVAL;
@@ -60,46 +59,47 @@
 	if (strncmp(i2c_device_name(adapter), "mac-io", 6))
 		return 0; /* ignored */
 
-	new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (! new_client)
-		return -ENOMEM;
-
-	new_client->addr = keywest_ctx->addr;
-	i2c_set_clientdata(new_client, keywest_ctx);
-	new_client->adapter = adapter;
-	new_client->driver = &keywest_driver;
-	new_client->flags = 0;
-
-	strcpy(i2c_device_name(new_client), keywest_ctx->name);
-	keywest_ctx->client = new_client;
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "keywest", I2C_NAME_SIZE);
+	info.addr = keywest_ctx->addr;
+	keywest_ctx->client = i2c_new_device(adapter, &info);
 	
-	/* Tell the i2c layer a new client has arrived */
-	if (i2c_attach_client(new_client)) {
-		snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n");
-		err = -ENODEV;
-		goto __err;
-	}
-
+	/*
+	 * Let i2c-core delete that device on driver removal.
+	 * This is safe because i2c-core holds the core_lock mutex for us.
+	 */
+	list_add_tail(&keywest_ctx->client->detected,
+		      &keywest_ctx->client->driver->clients);
 	return 0;
-
- __err:
-	kfree(new_client);
-	keywest_ctx->client = NULL;
-	return err;
 }
 
-static int keywest_detach_client(struct i2c_client *client)
+static int keywest_remove(struct i2c_client *client)
 {
+	i2c_set_clientdata(client, NULL);
 	if (! keywest_ctx)
 		return 0;
 	if (client == keywest_ctx->client)
 		keywest_ctx->client = NULL;
 
-	i2c_detach_client(client);
-	kfree(client);
 	return 0;
 }
 
+
+static const struct i2c_device_id keywest_i2c_id[] = {
+	{ "keywest", 0 },
+	{ }
+};
+
+struct i2c_driver keywest_driver = {
+	.driver = {
+		.name = "PMac Keywest Audio",
+	},
+	.attach_adapter = keywest_attach_adapter,
+	.probe = keywest_probe,
+	.remove = keywest_remove,
+	.id_table = keywest_i2c_id,
+};
+
 /* exported */
 void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c)
 {
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 030d245..f265380 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -56,7 +56,6 @@
 obj-$(CONFIG_SND_SOC_WM8903)	+= snd-soc-wm8903.o
 obj-$(CONFIG_SND_SOC_WM8971)	+= snd-soc-wm8971.o
 obj-$(CONFIG_SND_SOC_WM8990)	+= snd-soc-wm8990.o
-obj-$(CONFIG_SND_SOC_WM8991)	+= snd-soc-wm8991.o
 obj-$(CONFIG_SND_SOC_WM9705)	+= snd-soc-wm9705.o
 obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 442ea6f..9f6be3d 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -268,9 +268,11 @@
 static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
 			 struct snd_ctl_elem_value *ucontrol)
 {
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	int reg = kcontrol->private_value & 0xff;
-	int reg2 = (kcontrol->private_value >> 24) & 0xff;
+	unsigned int reg = mc->reg;
+	unsigned int reg2 = mc->rreg;
 	int ret;
 	u16 val;
 
@@ -292,15 +294,17 @@
 	return 0;
 }
 
-#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \
+#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
+				    xinvert, tlv_array)			\
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
 	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
 		SNDRV_CTL_ELEM_ACCESS_READWRITE,  \
 	.tlv.p = (tlv_array), \
 	.info = snd_soc_info_volsw_2r, \
 	.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
-	.private_value = (reg_left) | ((shift) << 8)  |		\
-		((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+		.max = xmax, .invert = xinvert} }
 
 static const struct snd_kcontrol_new wm8580_snd_controls[] = {
 SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
@@ -522,7 +526,7 @@
 	reg = wm8580_read(codec, WM8580_PLLA4 + offset);
 	reg &= ~0x3f;
 	reg |= pll_div.prescale | pll_div.postscale << 1 |
-		pll_div.freqmode << 4;
+		pll_div.freqmode << 3;
 
 	wm8580_write(codec, WM8580_PLLA4 + offset, reg);
 
diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index 6e23a81..c2d1a7a 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -318,7 +318,7 @@
 }
 
 #ifdef CONFIG_PM
-static int wm9705_soc_suspend(struct platform_device *pdev)
+static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index a6d1178..91ef179 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -417,6 +417,6 @@
 module_init(n810_soc_init);
 module_exit(n810_soc_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
 MODULE_DESCRIPTION("ALSA SoC Nokia N810");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 9c09b94..9126142 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -283,7 +284,7 @@
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
 		regs->srgr2	|= FPER(wlen * channels - 1);
-		regs->srgr1	|= FWID(wlen * channels - 2);
+		regs->srgr1	|= FWID(0);
 		break;
 	}
 
@@ -302,6 +303,7 @@
 {
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
+	unsigned int temp_fmt = fmt;
 
 	if (mcbsp_data->configured)
 		return 0;
@@ -328,6 +330,8 @@
 		/* 0-bit data delay */
 		regs->rcr2      |= RDATDLY(0);
 		regs->xcr2      |= XDATDLY(0);
+		/* Invert FS polarity configuration */
+		temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
 		break;
 	default:
 		/* Unsupported data format */
@@ -351,7 +355,7 @@
 	}
 
 	/* Set bit clock (CLKX/CLKR) and FS polarities */
-	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_NB_NF:
 		/*
 		 * Normal BCLK + FS.
@@ -529,6 +533,6 @@
 }
 module_exit(snd_omap_mcbsp_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
 MODULE_DESCRIPTION("OMAP I2S SoC Interface");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h
index df7ad13..c8147aa 100644
--- a/sound/soc/omap/omap-mcbsp.h
+++ b/sound/soc/omap/omap-mcbsp.h
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 1bdbb04..07cf7f4 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -367,6 +368,6 @@
 }
 module_exit(omap_soc_platform_exit);
 
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
 MODULE_DESCRIPTION("OMAP PCM DMA module");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-pcm.h b/sound/soc/omap/omap-pcm.h
index e4369bd..8d9d269 100644
--- a/sound/soc/omap/omap-pcm.h
+++ b/sound/soc/omap/omap-pcm.h
@@ -3,7 +3,8 @@
  *
  * Copyright (C) 2008 Nokia Corporation
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ *          Peter Ujfalusi <peter.ujfalusi@nokia.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index a952a4e..a4e149b7 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -62,7 +62,7 @@
 	/* Set codec DAI configuration */
 	err = snd_soc_dai_set_fmt(codec_dai,
 				  SND_SOC_DAIFMT_DSP_B |
-				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_NB_NF |
 				  SND_SOC_DAIFMT_CBM_CFM);
 	if (err < 0) {
 		printk(KERN_ERR "can't set codec DAI configuration\n");
@@ -72,7 +72,7 @@
 	/* Set cpu DAI configuration */
 	err = snd_soc_dai_set_fmt(cpu_dai,
 				  SND_SOC_DAIFMT_DSP_B |
-				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_NB_NF |
 				  SND_SOC_DAIFMT_CBM_CFM);
 	if (err < 0) {
 		printk(KERN_ERR "can't set cpu DAI configuration\n");
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index f7c4544..0625c34 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -27,8 +27,6 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
 #include <mach/magician.h>
 #include <asm/mach-types.h>
 #include "../codecs/uda1380.h"
diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c
index 48a73f6..44fcc4e 100644
--- a/sound/soc/pxa/palm27x.c
+++ b/sound/soc/pxa/palm27x.c
@@ -200,7 +200,7 @@
 
 static struct platform_device *palm27x_snd_device;
 
-static int __init palm27x_asoc_init(void)
+static int palm27x_asoc_probe(struct platform_device *pdev)
 {
 	int ret;
 
@@ -208,6 +208,10 @@
 		machine_is_palmld()))
 		return -ENODEV;
 
+	if (pdev->dev.platform_data)
+		palm27x_ep_gpio = ((struct palm27x_asoc_info *)
+			(pdev->dev.platform_data))->jack_gpio;
+
 	ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
 	if (ret)
 		return ret;
@@ -245,16 +249,31 @@
 	return ret;
 }
 
-static void __exit palm27x_asoc_exit(void)
+static int __devexit palm27x_asoc_remove(struct platform_device *pdev)
 {
 	free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
 	gpio_free(palm27x_ep_gpio);
 	platform_device_unregister(palm27x_snd_device);
+	return 0;
 }
 
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data)
+static struct platform_driver palm27x_wm9712_driver = {
+	.probe		= palm27x_asoc_probe,
+	.remove		= __devexit_p(palm27x_asoc_remove),
+	.driver		= {
+		.name		= "palm27x-asoc",
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init palm27x_asoc_init(void)
 {
-	palm27x_ep_gpio = data->jack_gpio;
+	return platform_driver_register(&palm27x_wm9712_driver);
+}
+
+static void __exit palm27x_asoc_exit(void)
+{
+	platform_driver_unregister(&palm27x_wm9712_driver);
 }
 
 module_init(palm27x_asoc_init);
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 308a657..286be31 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -280,12 +280,33 @@
  * ssp_set_clkdiv - set SSP clock divider
  * @div: serial clock rate divider
  */
-static void ssp_set_scr(struct ssp_dev *dev, u32 div)
+static void ssp_set_scr(struct ssp_device *ssp, u32 div)
 {
-	struct ssp_device *ssp = dev->ssp;
-	u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
+	u32 sscr0 = ssp_read_reg(ssp, SSCR0);
 
-	ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
+	if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+		sscr0 &= ~0x0000ff00;
+		sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+	} else {
+		sscr0 &= ~0x000fff00;
+		sscr0 |= (div - 1) << 8;     /* 1..4096 */
+	}
+	ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/**
+ * ssp_get_clkdiv - get SSP clock divider
+ */
+static u32 ssp_get_scr(struct ssp_device *ssp)
+{
+	u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+	u32 div;
+
+	if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+		div = ((sscr0 >> 8) & 0xff) * 2 + 2;
+	else
+		div = ((sscr0 >> 8) & 0xfff) + 1;
+	return div;
 }
 
 /*
@@ -326,7 +347,7 @@
 		break;
 	case PXA_SSP_CLK_AUDIO:
 		priv->sysclk = 0;
-		ssp_set_scr(&priv->dev, 1);
+		ssp_set_scr(ssp, 1);
 		sscr0 |= SSCR0_ACS;
 		break;
 	default:
@@ -387,7 +408,7 @@
 		ssp_write_reg(ssp, SSACD, val);
 		break;
 	case PXA_SSP_DIV_SCR:
-		ssp_set_scr(&priv->dev, div);
+		ssp_set_scr(ssp, div);
 		break;
 	default:
 		return -ENODEV;
@@ -674,8 +695,7 @@
 	case SND_SOC_DAIFMT_I2S:
 	       sspsp = ssp_read_reg(ssp, SSPSP);
 
-		if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
-		     (width == 16)) {
+		if ((ssp_get_scr(ssp) == 4) && (width == 16)) {
 			/* This is a special case where the bitclk is 64fs
 			* and we're not dealing with 2*32 bits of audio
 			* samples.
@@ -806,6 +826,7 @@
 		goto err_priv;
 	}
 
+	priv->dai_fmt = (unsigned int) -1;
 	dai->private_data = priv;
 
 	return 0;
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 2f3a21e..df494d1 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -1,10 +1,10 @@
 config SND_S3C24XX_SOC
 	tristate "SoC Audio for the Samsung S3CXXXX chips"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C2410
 	help
 	  Say Y or M if you want to add support for codecs attached to
-	  the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will
-	  also need to select the audio interfaces to support below.
+	  the S3C24XX AC97 or I2S interfaces. You will also need to
+	  select the audio interfaces to support below.
 
 config SND_S3C24XX_SOC_I2S
 	tristate
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
index 3206379..93e6c87 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/s3c24xx/jive_wm8750.c
@@ -69,8 +69,8 @@
 		break;
 	}
 
-	s3c_i2sv2_calc_rate(&div, NULL, params_rate(params),
-			    s3c2412_get_iisclk());
+	s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+				s3c2412_get_iisclk());
 
 	/* set codec DAI configuration */
 	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
@@ -145,8 +145,9 @@
 };
 
 /* jive audio machine driver */
-static struct snd_soc_machine snd_soc_machine_jive = {
+static struct snd_soc_card snd_soc_machine_jive = {
 	.name		= "Jive",
+	.platform	= &s3c24xx_soc_platform,
 	.dai_link	= &jive_dai,
 	.num_links	= 1,
 };
@@ -157,9 +158,8 @@
 
 /* jive audio subsystem */
 static struct snd_soc_device jive_snd_devdata = {
-	.machine	= &snd_soc_machine_jive,
-	.platform	= &s3c24xx_soc_platform,
-	.codec_dev	= &soc_codec_dev_wm8750_spi,
+	.card		= &snd_soc_machine_jive,
+	.codec_dev	= &soc_codec_dev_wm8750,
 	.codec_data	= &jive_wm8750_setup,
 };
 
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 295a4c9..ab680aa 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -473,9 +473,9 @@
 /* default table of all avaialable root fs divisors */
 static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
 
-int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
-			  unsigned int *fstab,
-			  unsigned int rate, struct clk *clk)
+int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+			    unsigned int *fstab,
+			    unsigned int rate, struct clk *clk)
 {
 	unsigned long clkrate = clk_get_rate(clk);
 	unsigned int div;
@@ -531,7 +531,7 @@
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate);
+EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
 
 int s3c_i2sv2_probe(struct platform_device *pdev,
 		    struct snd_soc_dai *dai,
@@ -624,15 +624,18 @@
 
 int s3c_i2sv2_register_dai(struct snd_soc_dai *dai)
 {
-	dai->ops.trigger = s3c2412_i2s_trigger;
-	dai->ops.hw_params = s3c2412_i2s_hw_params;
-	dai->ops.set_fmt = s3c2412_i2s_set_fmt;
-	dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv;
+	struct snd_soc_dai_ops *ops = dai->ops;
+
+	ops->trigger = s3c2412_i2s_trigger;
+	ops->hw_params = s3c2412_i2s_hw_params;
+	ops->set_fmt = s3c2412_i2s_set_fmt;
+	ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
 
 	dai->suspend = s3c2412_i2s_suspend;
 	dai->resume = s3c2412_i2s_resume;
 
 	return snd_soc_register_dai(dai);
 }
-
 EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
+
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 1ca3cda..b7e0b3f 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -33,8 +33,8 @@
 
 #include <plat/regs-s3c2412-iis.h>
 
-#include <plat/regs-gpio.h>
 #include <plat/audio.h>
+#include <mach/regs-gpio.h>
 #include <mach/dma.h>
 
 #include "s3c24xx-pcm.h"
diff --git a/sound/usb/caiaq/Makefile b/sound/usb/caiaq/Makefile
index 23dadd5..3889996 100644
--- a/sound/usb/caiaq/Makefile
+++ b/sound/usb/caiaq/Makefile
@@ -1,4 +1,4 @@
-snd-usb-caiaq-y := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-control.o
-snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += caiaq-input.o
+snd-usb-caiaq-y := device.o audio.o midi.o control.o
+snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += input.o
 
 obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o
diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/audio.c
similarity index 97%
rename from sound/usb/caiaq/caiaq-audio.c
rename to sound/usb/caiaq/audio.c
index 08d51e0..b13ce76 100644
--- a/sound/usb/caiaq/caiaq-audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -16,20 +16,14 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
 #include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/usb.h>
 #include <sound/core.h>
-#include <sound/initval.h>
 #include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <linux/input.h>
 
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
+#include "device.h"
+#include "audio.h"
 
 #define N_URBS			32
 #define CLOCK_DRIFT_TOLERANCE	5
@@ -201,11 +195,14 @@
 
 	debug("%s(%p)\n", __func__, substream);
 	
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
 		dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
-	else
+	} else {
+		dev->period_in_count[index] = BYTES_PER_SAMPLE;
 		dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE;
-	
+	}
+
 	if (dev->streaming)
 		return 0;
 	
@@ -306,8 +303,7 @@
 		if (!sub)
 			continue;
 
-		pb = frames_to_bytes(sub->runtime, 
-				     sub->runtime->period_size);
+		pb = snd_pcm_lib_period_bytes(sub);
 		cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
 					&dev->period_out_count[stream] :
 					&dev->period_in_count[stream];
diff --git a/sound/usb/caiaq/caiaq-audio.h b/sound/usb/caiaq/audio.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-audio.h
rename to sound/usb/caiaq/audio.h
diff --git a/sound/usb/caiaq/caiaq-control.c b/sound/usb/caiaq/control.c
similarity index 98%
rename from sound/usb/caiaq/caiaq-control.c
rename to sound/usb/caiaq/control.c
index e92c2bb..537102b 100644
--- a/sound/usb/caiaq/caiaq-control.c
+++ b/sound/usb/caiaq/control.c
@@ -18,17 +18,13 @@
  */
 
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/usb.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/rawmidi.h>
 #include <sound/control.h>
-#include <linux/input.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
 
-#include "caiaq-device.h"
-#include "caiaq-control.h"
+#include "device.h"
+#include "control.h"
 
 #define CNT_INTVAL 0x10000
 
diff --git a/sound/usb/caiaq/caiaq-control.h b/sound/usb/caiaq/control.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-control.h
rename to sound/usb/caiaq/control.h
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/device.c
similarity index 97%
rename from sound/usb/caiaq/caiaq-device.c
rename to sound/usb/caiaq/device.c
index cf573a9..515de1c 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/device.c
@@ -19,30 +19,23 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
 
-#include <linux/init.h>
-#include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
 #include <sound/initval.h>
+#include <sound/core.h>
 #include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
 
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
-#include "caiaq-midi.h"
-#include "caiaq-control.h"
-
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
-#include "caiaq-input.h"
-#endif
+#include "device.h"
+#include "audio.h"
+#include "midi.h"
+#include "control.h"
+#include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/device.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-device.h
rename to sound/usb/caiaq/device.h
diff --git a/sound/usb/caiaq/caiaq-input.c b/sound/usb/caiaq/input.c
similarity index 97%
rename from sound/usb/caiaq/caiaq-input.c
rename to sound/usb/caiaq/input.c
index f743847..a48d309 100644
--- a/sound/usb/caiaq/caiaq-input.c
+++ b/sound/usb/caiaq/input.c
@@ -17,17 +17,12 @@
 */
 
 #include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/rawmidi.h>
 #include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-input.h"
+
+#include "device.h"
+#include "input.h"
 
 static unsigned short keycode_ak1[] =  { KEY_C, KEY_B, KEY_A };
 static unsigned short keycode_rk2[] =  { KEY_1, KEY_2, KEY_3, KEY_4,
diff --git a/sound/usb/caiaq/caiaq-input.h b/sound/usb/caiaq/input.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-input.h
rename to sound/usb/caiaq/input.h
diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/midi.c
similarity index 95%
rename from sound/usb/caiaq/caiaq-midi.c
rename to sound/usb/caiaq/midi.c
index f19fd36..8fa8cd8 100644
--- a/sound/usb/caiaq/caiaq-midi.c
+++ b/sound/usb/caiaq/midi.c
@@ -16,20 +16,13 @@
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
 #include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
 #include <sound/rawmidi.h>
+#include <sound/core.h>
 #include <sound/pcm.h>
 
-#include "caiaq-device.h"
-#include "caiaq-midi.h"
-
+#include "device.h"
+#include "midi.h"
 
 static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
 {
diff --git a/sound/usb/caiaq/caiaq-midi.h b/sound/usb/caiaq/midi.h
similarity index 100%
rename from sound/usb/caiaq/caiaq-midi.h
rename to sound/usb/caiaq/midi.h
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 98276aa..a5aae9d 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -349,14 +349,10 @@
 	if (cmd != SNDRV_USB_STREAM_IOCTL_SET_PARAMS)
 		return -ENOTTY;
 
-	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
-	if (!cfg)
-		return -ENOMEM;
+	cfg = memdup_user((void *)arg, sizeof(*cfg));
+	if (IS_ERR(cfg))
+		return PTR_ERR(cfg);
 
-	if (copy_from_user(cfg, (void *)arg, sizeof(*cfg))) {
-		err = -EFAULT;
-		goto free;
-	}
 	if (cfg->version != USB_STREAM_INTERFACE_VERSION) {
 		err = -ENXIO;
 		goto free;
@@ -478,6 +474,14 @@
 	return true;
 }
 
+static void snd_us122l_free(struct snd_card *card)
+{
+	struct us122l	*us122l = US122L(card);
+	int		index = us122l->chip.index;
+	if (index >= 0  &&  index < SNDRV_CARDS)
+		snd_us122l_card_used[index] = 0;
+}
+
 static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp)
 {
 	int		dev;
@@ -494,7 +498,7 @@
 	if (err < 0)
 		return err;
 	snd_us122l_card_used[US122L(card)->chip.index = dev] = 1;
-
+	card->private_free = snd_us122l_free;
 	US122L(card)->chip.dev = device;
 	US122L(card)->chip.card = card;
 	mutex_init(&US122L(card)->mutex);
@@ -588,7 +592,7 @@
 	}
 
 	usb_put_intf(intf);
-	usb_put_dev(US122L(card)->chip.dev);
+	usb_put_dev(us122l->chip.dev);
 
 	while (atomic_read(&us122l->mmap_count))
 		msleep(500);
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 4af8740..f3d8f71 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -203,13 +203,12 @@
 
 	if (access_ok(VERIFY_READ, dsp->image, dsp->length)) {
 		struct usb_device* dev = priv->chip.dev;
-		char *buf = kmalloc(dsp->length, GFP_KERNEL);
-		if (!buf)
-			return -ENOMEM;
-		if (copy_from_user(buf, dsp->image, dsp->length)) {
-			kfree(buf);
-			return -EFAULT;
-		}
+		char *buf;
+
+		buf = memdup_user(dsp->image, dsp->length);
+		if (IS_ERR(buf))
+			return PTR_ERR(buf);
+
 		err = usb_set_interface(dev, 0, 1);
 		if (err)
 			snd_printk(KERN_ERR "usb_set_interface error \n");
diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c
index 24393da..12ae034 100644
--- a/sound/usb/usx2y/usb_stream.c
+++ b/sound/usb/usx2y/usb_stream.c
@@ -33,32 +33,26 @@
 static void playback_prep_freqn(struct usb_stream_kernel *sk, struct urb *urb)
 {
 	struct usb_stream *s = sk->s;
-	unsigned l = 0;
-	int pack;
+	int pack, lb = 0;
 
-	urb->iso_frame_desc[0].offset = 0;
-	urb->iso_frame_desc[0].length =	usb_stream_next_packet_size(sk);
-	sk->out_phase = sk->out_phase_peeked;
-	urb->transfer_buffer_length = urb->iso_frame_desc[0].length;
-
-	for (pack = 1; pack < sk->n_o_ps; pack++) {
-		l = usb_stream_next_packet_size(sk);
-		if (s->idle_outsize + urb->transfer_buffer_length + l >
-		    s->period_size)
+	for (pack = 0; pack < sk->n_o_ps; pack++) {
+		int l = usb_stream_next_packet_size(sk);
+		if (s->idle_outsize + lb + l > s->period_size)
 			goto check;
 
 		sk->out_phase = sk->out_phase_peeked;
-		urb->iso_frame_desc[pack].offset = urb->transfer_buffer_length;
+		urb->iso_frame_desc[pack].offset = lb;
 		urb->iso_frame_desc[pack].length = l;
-		urb->transfer_buffer_length += l;
+		lb += l;
 	}
-	snd_printdd(KERN_DEBUG "%i\n", urb->transfer_buffer_length);
+	snd_printdd(KERN_DEBUG "%i\n", lb);
 
 check:
 	urb->number_of_packets = pack;
-	s->idle_outsize += urb->transfer_buffer_length - s->period_size;
+	urb->transfer_buffer_length = lb;
+	s->idle_outsize += lb - s->period_size;
 	snd_printdd(KERN_DEBUG "idle=%i ul=%i ps=%i\n", s->idle_outsize,
-		    urb->transfer_buffer_length, s->period_size);
+		    lb, s->period_size);
 }
 
 static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
@@ -282,21 +276,20 @@
 	struct usb_stream *s = sk->s;
 	struct urb *io;
 	struct usb_iso_packet_descriptor *id, *od;
-	int p, l = 0;
+	int p = 0, lb = 0, l = 0;
 
 	io = sk->idle_outurb;
 	od = io->iso_frame_desc;
-	io->transfer_buffer_length = 0;
 
-	for (p = 0; s->sync_packet < 0; ++p, ++s->sync_packet) {
+	for (; s->sync_packet < 0; ++p, ++s->sync_packet) {
 		struct urb *ii = sk->completed_inurb;
 		id = ii->iso_frame_desc +
 			ii->number_of_packets + s->sync_packet;
 		l = id->actual_length;
 
 		od[p].length = l;
-		od[p].offset = io->transfer_buffer_length;
-		io->transfer_buffer_length += l;
+		od[p].offset = lb;
+		lb += l;
 	}
 
 	for (;
@@ -304,38 +297,38 @@
 	     ++p, ++s->sync_packet) {
 		l = inurb->iso_frame_desc[s->sync_packet].actual_length;
 
-		if (s->idle_outsize + io->transfer_buffer_length + l >
-		    s->period_size)
+		if (s->idle_outsize + lb + l > s->period_size)
 			goto check_ok;
 
 		od[p].length = l;
-		od[p].offset = io->transfer_buffer_length;
-		io->transfer_buffer_length += l;
+		od[p].offset = lb;
+		lb += l;
 	}
 
 check_ok:
 	s->sync_packet -= inurb->number_of_packets;
-	if (s->sync_packet < -2 || s->sync_packet > 0) {
+	if (unlikely(s->sync_packet < -2 || s->sync_packet > 0)) {
 		snd_printk(KERN_WARNING "invalid sync_packet = %i;"
 			   " p=%i nop=%i %i %x %x %x > %x\n",
 			   s->sync_packet, p, inurb->number_of_packets,
-			   s->idle_outsize + io->transfer_buffer_length + l,
-			   s->idle_outsize, io->transfer_buffer_length,  l,
+			   s->idle_outsize + lb + l,
+			   s->idle_outsize, lb,  l,
 			   s->period_size);
 		return -1;
 	}
-	if (io->transfer_buffer_length % s->cfg.frame_size) {
+	if (unlikely(lb % s->cfg.frame_size)) {
 		snd_printk(KERN_WARNING"invalid outsize = %i\n",
-			   io->transfer_buffer_length);
+			   lb);
 		return -1;
 	}
-	s->idle_outsize += io->transfer_buffer_length - s->period_size;
+	s->idle_outsize += lb - s->period_size;
 	io->number_of_packets = p;
-	if (s->idle_outsize > 0) {
-		snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
-		return -1;
-	}
-	return 0;
+	io->transfer_buffer_length = lb;
+	if (s->idle_outsize <= 0)
+		return 0;
+
+	snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
+	return -1;
 }
 
 static void prepare_inurb(int number_of_packets, struct urb *iu)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 605697e..1ecbe23 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -920,6 +920,7 @@
 	int r;
 	gfn_t base_gfn;
 	unsigned long npages;
+	int largepages;
 	unsigned long i;
 	struct kvm_memory_slot *memslot;
 	struct kvm_memory_slot old, new;
@@ -960,7 +961,7 @@
 	for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
 		struct kvm_memory_slot *s = &kvm->memslots[i];
 
-		if (s == memslot)
+		if (s == memslot || !s->npages)
 			continue;
 		if (!((base_gfn + npages <= s->base_gfn) ||
 		      (base_gfn >= s->base_gfn + s->npages)))
@@ -995,11 +996,8 @@
 			new.userspace_addr = 0;
 	}
 	if (npages && !new.lpage_info) {
-		int largepages = npages / KVM_PAGES_PER_HPAGE;
-		if (npages % KVM_PAGES_PER_HPAGE)
-			largepages++;
-		if (base_gfn % KVM_PAGES_PER_HPAGE)
-			largepages++;
+		largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE;
+		largepages -= base_gfn / KVM_PAGES_PER_HPAGE;
 
 		new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info));
 
@@ -1985,6 +1983,7 @@
 	switch (arg) {
 	case KVM_CAP_USER_MEMORY:
 	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
+	case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS:
 		return 1;
 #ifdef CONFIG_HAVE_KVM_IRQCHIP
 	case KVM_CAP_IRQ_ROUTING: