[SCSI] gdth: PCI probe cleanups, prep for PCI hotplug API conversion
- Reduce uses of gdth_pci_str::pdev, preferring a local variable
(or function arg) 'pdev' instead.
- Reduce uses of gdth_pcistr array, preferring local variable
(or function arg) 'pcistr' instead.
- Eliminate lone use of gdth_pci_str::irq, using equivalent
pdev->irq instead
- Eliminate assign-only gdth_pci_str::io_mm
Note: If the indentation seems weird, that's because a line was
converted from spaces to tabs, when it was modified.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 0b2080d..12be672 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -649,7 +649,6 @@
/* GDT PCI controller found, resources are already in pdev */
pcistr[*cnt].pdev = pdev;
- pcistr[*cnt].irq = pdev->irq;
base0 = pci_resource_flags(pdev, 0);
base1 = pci_resource_flags(pdev, 1);
base2 = pci_resource_flags(pdev, 2);
@@ -664,7 +663,6 @@
!(base1 & IORESOURCE_IO))
continue;
pcistr[*cnt].dpmem = pci_resource_start(pdev, 2);
- pcistr[*cnt].io_mm = pci_resource_start(pdev, 0);
pcistr[*cnt].io = pci_resource_start(pdev, 1);
}
TRACE2(("Controller found at %d/%d, irq %d, dpmem 0x%lx\n",
@@ -909,7 +907,8 @@
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static int __init gdth_init_pci(gdth_pci_str *pcistr,gdth_ha_str *ha)
+static int __init gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+ gdth_ha_str *ha)
{
register gdt6_dpram_str __iomem *dp6_ptr;
register gdt6c_dpram_str __iomem *dp6c_ptr;
@@ -921,14 +920,14 @@
TRACE(("gdth_init_pci()\n"));
- if (pcistr->pdev->vendor == PCI_VENDOR_ID_INTEL)
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL)
ha->oem_id = OEM_ID_INTEL;
else
ha->oem_id = OEM_ID_ICP;
- ha->brd_phys = (pcistr->pdev->bus->number << 8) | (pcistr->pdev->devfn & 0xf8);
- ha->stype = (ulong32)pcistr->pdev->device;
- ha->irq = pcistr->irq;
- ha->pdev = pcistr->pdev;
+ ha->brd_phys = (pdev->bus->number << 8) | (pdev->devfn & 0xf8);
+ ha->stype = (ulong32)pdev->device;
+ ha->irq = pdev->irq;
+ ha->pdev = pdev;
if (ha->pdev->device <= PCI_DEVICE_ID_VORTEX_GDT6000B) { /* GDT6000/B */
TRACE2(("init_pci() dpmem %lx irq %d\n",pcistr->dpmem,ha->irq));
@@ -956,8 +955,7 @@
continue;
}
iounmap(ha->brd);
- pci_write_config_dword(pcistr->pdev,
- PCI_BASE_ADDRESS_0, i);
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, i);
ha->brd = ioremap(i, sizeof(gdt6_dpram_str));
if (ha->brd == NULL) {
printk("GDT-PCI: Initialization error (DPMEM remap error)\n");
@@ -1066,8 +1064,7 @@
continue;
}
iounmap(ha->brd);
- pci_write_config_dword(pcistr->pdev,
- PCI_BASE_ADDRESS_2, i);
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_2, i);
ha->brd = ioremap(i, sizeof(gdt6c_dpram_str));
if (ha->brd == NULL) {
printk("GDT-PCI: Initialization error (DPMEM remap error)\n");
@@ -1159,16 +1156,16 @@
}
/* manipulate config. space to enable DPMEM, start RP controller */
- pci_read_config_word(pcistr->pdev, PCI_COMMAND, &command);
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
command |= 6;
- pci_write_config_word(pcistr->pdev, PCI_COMMAND, command);
- if (pci_resource_start(pcistr->pdev, 8) == 1UL)
- pci_resource_start(pcistr->pdev, 8) = 0UL;
+ pci_write_config_word(pdev, PCI_COMMAND, command);
+ if (pci_resource_start(pdev, 8) == 1UL)
+ pci_resource_start(pdev, 8) = 0UL;
i = 0xFEFF0001UL;
- pci_write_config_dword(pcistr->pdev, PCI_ROM_ADDRESS, i);
+ pci_write_config_dword(pdev, PCI_ROM_ADDRESS, i);
gdth_delay(1);
- pci_write_config_dword(pcistr->pdev, PCI_ROM_ADDRESS,
- pci_resource_start(pcistr->pdev, 8));
+ pci_write_config_dword(pdev, PCI_ROM_ADDRESS,
+ pci_resource_start(pdev, 8));
dp6m_ptr = ha->brd;
@@ -1195,8 +1192,7 @@
continue;
}
iounmap(ha->brd);
- pci_write_config_dword(pcistr->pdev,
- PCI_BASE_ADDRESS_0, i);
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, i);
ha->brd = ioremap(i, sizeof(gdt6m_dpram_str));
if (ha->brd == NULL) {
printk("GDT-PCI: Initialization error (DPMEM remap error)\n");
@@ -4955,12 +4951,13 @@
#endif /* CONFIG_EISA */
#ifdef CONFIG_PCI
-static int __init gdth_pci_probe_one(gdth_pci_str *pcistr, int ctr)
+static int __init gdth_pci_probe_one(gdth_pci_str *pcistr)
{
struct Scsi_Host *shp;
gdth_ha_str *ha;
dma_addr_t scratch_dma_handle = 0;
int error, i;
+ struct pci_dev *pdev = pcistr->pdev;
shp = scsi_host_alloc(&gdth_template, sizeof(gdth_ha_str));
if (!shp)
@@ -4968,13 +4965,13 @@
ha = shost_priv(shp);
error = -ENODEV;
- if (!gdth_init_pci(&pcistr[ctr],ha))
+ if (!gdth_init_pci(pdev, pcistr, ha))
goto out_host_put;
/* controller found and initialized */
printk("Configuring GDT-PCI HA at %d/%d IRQ %u\n",
- pcistr[ctr].pdev->bus->number,
- PCI_SLOT(pcistr[ctr].pdev->devfn),
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn),
ha->irq);
error = request_irq(ha->irq, gdth_interrupt,
@@ -5019,7 +5016,7 @@
ha->scratch_busy = FALSE;
ha->req_first = NULL;
- ha->tid_cnt = pcistr[ctr].pdev->device >= 0x200 ? MAXID : MAX_HDRIVES;
+ ha->tid_cnt = pdev->device >= 0x200 ? MAXID : MAX_HDRIVES;
if (max_ids > 0 && max_ids < ha->tid_cnt)
ha->tid_cnt = max_ids;
for (i = 0; i < GDTH_MAXCMDS; ++i)
@@ -5039,16 +5036,16 @@
/* 64-bit DMA only supported from FW >= x.43 */
if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT) ||
!ha->dma64_support) {
- if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: "
"Unable to set 32-bit DMA\n", ha->hanum);
goto out_free_coal_stat;
}
} else {
shp->max_cmd_len = 16;
- if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
printk("GDT-PCI %d: 64-bit DMA enabled\n", ha->hanum);
- } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
+ } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: "
"Unable to set 64/32-bit DMA\n", ha->hanum);
goto out_free_coal_stat;
@@ -5062,7 +5059,7 @@
spin_lock_init(&ha->smp_lock);
gdth_enable_int(ha);
- error = scsi_add_host(shp, &pcistr[ctr].pdev->dev);
+ error = scsi_add_host(shp, &pdev->dev);
if (error)
goto out_free_coal_stat;
list_add_tail(&ha->list, &gdth_instances);
@@ -5193,7 +5190,7 @@
printk("GDT-HA: Found %d PCI Storage RAID Controllers\n", cnt);
gdth_sort_pci(pcistr,cnt);
for (ctr = 0; ctr < cnt; ++ctr)
- gdth_pci_probe_one(pcistr, ctr);
+ gdth_pci_probe_one(&pcistr[ctr]);
}
#endif /* CONFIG_PCI */
diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h
index 26e4e92..ca92476 100644
--- a/drivers/scsi/gdth.h
+++ b/drivers/scsi/gdth.h
@@ -839,8 +839,6 @@
struct pci_dev *pdev;
ulong dpmem; /* DPRAM address */
ulong io; /* IO address */
- ulong io_mm; /* IO address mem. mapped */
- unchar irq; /* IRQ */
} gdth_pci_str;
