V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 H
This patch is on behalf of Stephen Backway <stev391@email.com>, and
represents two patches I received (and some subsequent whitespace
cleanup I had due to how I pulled the patches).
From the original author:
a) Add DVB support for the Leadtek Winfast PxDVR3200 H.
b) The tuner callback previously checked the command 3 times:
1) To see if it was the XC2028_RESET_CLK
2) To see if it was not the XC2028_RESET_TUNER
3) To see if it was the XC2028_RESET_TUNER
This patch removes the third check.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Stephen Backway <stev391@email.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index bccafd3..64823cc 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -10,3 +10,4 @@
9 -> Hauppauge WinTV-HVR1400 [0070:8010]
10 -> DViCO FusionHDTV7 Dual Express [18ac:d618]
11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78]
+ 12 -> Leadtek Winfast PxDVR3200 H [107d:6681]
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index e60bd31..8c1b7fa4 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -15,6 +15,7 @@
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 0daffc3..ccea8de 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -154,6 +154,10 @@
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = {
+ .name = "Leadtek Winfast PxDVR3200 H",
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -229,6 +233,10 @@
.subvendor = 0x18ac,
.subdevice = 0xdb78,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
+ }, {
+ .subvendor = 0x107d,
+ .subdevice = 0x6681,
+ .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -348,21 +356,18 @@
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
/* Tuner Reset Command */
- if (command == 0)
- bitmask = 0x04;
+ bitmask = 0x04;
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
- if (command == 0) {
-
- /* Two identical tuners on two different i2c buses,
- * we need to reset the correct gpio. */
- if (port->nr == 0)
- bitmask = 0x01;
- else if (port->nr == 1)
- bitmask = 0x04;
- }
+ /* Two identical tuners on two different i2c buses,
+ * we need to reset the correct gpio. */
+ if (port->nr == 0)
+ bitmask = 0x01;
+ else if (port->nr == 1)
+ bitmask = 0x04;
break;
}
@@ -491,6 +496,19 @@
mdelay(20);
cx_set(GP0_IO, 0x000f000f);
break;
+ case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+ /* GPIO-2 xc3028 tuner reset */
+
+ /* The following GPIO's are on the internal AVCore (cx25840) */
+ /* GPIO-? zl10353 demod reset */
+
+ /* Put the parts into reset and back */
+ cx_set(GP0_IO, 0x00040000);
+ mdelay(20);
+ cx_clear(GP0_IO, 0x00000004);
+ mdelay(20);
+ cx_set(GP0_IO, 0x00040004);
+ break;
}
}
@@ -578,6 +596,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1200:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_HAUPPAUGE_HVR1400:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -591,6 +610,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
+ case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
request_module("cx25840");
break;
}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index f8564bb..b85cb39 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -501,6 +501,32 @@
}
break;
}
+ case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+ i2c_bus = &dev->i2c_bus[0];
+
+ port->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &i2c_bus->i2c_adap);
+ if (port->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_bus[1].i2c_adap,
+ .i2c_addr = 0x61,
+ .video_dev = port,
+ .callback = cx23885_tuner_callback,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = "xc3028-v27.fw",
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ };
+
+ fe = dvb_attach(xc2028_attach, port->dvb.frontend,
+ &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index db52d81..4e0fcb3 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -65,6 +65,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1400 9
#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12
/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
#define CX23885_NORMS (\
