[TULIP]: Use CONFIG_SPARC consistently in ifdef tests.

Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index c82befa..a0eda56 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -63,7 +63,7 @@
 
 /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
 #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-        || defined(__sparc__) || defined(__ia64__) \
+        || defined(CONFIG_SPARC) || defined(__ia64__) \
         || defined(__sh__) || defined(__mips__)
 static int rx_copybreak = 1518;
 #else
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 4b3cd3d..e4af94e 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -1160,7 +1160,7 @@
 	sprintf(lp->adapter_name,"%s (%s)", name, gendev->bus_id);
 
 	lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc);
-#if defined(__alpha__) || defined(__powerpc__) || defined(__sparc_v9__) || defined(DE4X5_DO_MEMCPY)
+#if defined(__alpha__) || defined(__powerpc__) || defined(CONFIG_SPARC) || defined(DE4X5_DO_MEMCPY)
 	lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN;
 #endif
 	lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size,
@@ -1175,7 +1175,7 @@
 	** Set up the RX descriptor ring (Intels)
 	** Allocate contiguous receive buffers, long word aligned (Alphas)
 	*/
-#if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY)
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
 	for (i=0; i<NUM_RX_DESC; i++) {
 	    lp->rx_ring[i].status = 0;
 	    lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ);
@@ -1252,11 +1252,7 @@
 	    mii_get_phy(dev);
 	}
 
-#ifndef __sparc_v9__
 	printk("      and requires IRQ%d (provided by %s).\n", dev->irq,
-#else
-	printk("      and requires IRQ%x (provided by %s).\n", dev->irq,
-#endif
 	       ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG"));
     }
 
@@ -3627,7 +3623,7 @@
     struct de4x5_private *lp = netdev_priv(dev);
     struct sk_buff *p;
 
-#if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY)
+#if !defined(__alpha__) && !defined(__powerpc__) && !defined(CONFIG_SPARC) && !defined(DE4X5_DO_MEMCPY)
     struct sk_buff *ret;
     u_long i=0, tmp;
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 03c1418..81bcc56 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -36,7 +36,7 @@
 #include <asm/unaligned.h>
 #include <asm/uaccess.h>
 
-#ifdef __sparc__
+#ifdef CONFIG_SPARC
 #include <asm/pbm.h>
 #endif
 
@@ -67,7 +67,7 @@
 
 /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
 #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-	|| defined(__sparc__) || defined(__ia64__) \
+	|| defined(CONFIG_SPARC) || defined(__ia64__) \
 	|| defined(__sh__) || defined(__mips__)
 static int rx_copybreak = 1518;
 #else
@@ -91,7 +91,7 @@
 static int csr0 = 0x01A00000 | 0xE000;
 #elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__)
 static int csr0 = 0x01A00000 | 0x8000;
-#elif defined(__sparc__) || defined(__hppa__)
+#elif defined(CONFIG_SPARC) || defined(__hppa__)
 /* The UltraSparc PCI controllers will disconnect at every 64-byte
  * crossing anyways so it makes no sense to tell Tulip to burst
  * any more than that.
@@ -1315,7 +1315,7 @@
 	/* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */
 	if (tulip_uli_dm_quirk(pdev)) {
 		csr0 &= ~0x01f100ff;
-#if defined(__sparc__)
+#if defined(CONFIG_SPARC)
                 csr0 = (csr0 & ~0xff00) | 0xe000;
 #endif
 	}
@@ -1535,14 +1535,14 @@
 	   Many PCI BIOSes also incorrectly report the IRQ line, so we correct
 	   that here as well. */
 	if (sum == 0  || sum == 6*0xff) {
-#if defined(__sparc__)
+#if defined(CONFIG_SPARC)
 		struct pcidev_cookie *pcp = pdev->sysdata;
 #endif
 		eeprom_missing = 1;
 		for (i = 0; i < 5; i++)
 			dev->dev_addr[i] = last_phys_addr[i];
 		dev->dev_addr[i] = last_phys_addr[i] + 1;
-#if defined(__sparc__)
+#if defined(CONFIG_SPARC)
 		if (pcp) {
 			const unsigned char *addr;
 			int len;
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 002a05e..e164a0d 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -903,7 +903,7 @@
 	}
 #elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__)
 	i |= 0xE000;
-#elif defined(__sparc__) || defined (CONFIG_PARISC)
+#elif defined(CONFIG_SPARC) || defined (CONFIG_PARISC)
 	i |= 0x4800;
 #else
 #warning Processor architecture undefined
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index a998c5d..15a1be6 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -65,7 +65,7 @@
 static int csr0 = 0x01A00000 | 0xE000;
 #elif defined(__powerpc__)
 static int csr0 = 0x01B00000 | 0x8000;
-#elif defined(__sparc__)
+#elif defined(CONFIG_SPARC)
 static int csr0 = 0x01B00080 | 0x8000;
 #elif defined(__i386__)
 static int csr0 = 0x01A00000 | 0x8000;