mac80211: reduce reliance on netdev
For bluetooth 3, we will most likely not have
a netdev for a virtual interface (sdata), so
prepare for that by reducing the reliance on
having a netdev. This patch moves the name
and address fields into the sdata struct and
uses them from there all over. Some work is
needed to keep them sync'ed, but that's not
a lot of work and in slow paths anyway.
In doing so, this also reduces the number of
pointer dereferences in many places, because
of things like sdata->dev->dev_addr becoming
sdata->vif.addr.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 1925be9..ef6c6b2 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -117,7 +117,7 @@
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_PROBE_RESP);
memset(mgmt->da, 0xff, ETH_ALEN);
- memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
+ memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN);
mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int);
mgmt->u.beacon.timestamp = cpu_to_le64(tsf);
@@ -266,7 +266,7 @@
printk(KERN_DEBUG "%s: updated supp_rates set "
"for %pM based on beacon info (0x%llx | "
"0x%llx -> 0x%llx)\n",
- sdata->dev->name,
+ sdata->name,
sta->sta.addr,
(unsigned long long) prev_rates,
(unsigned long long) supp_rates,
@@ -364,7 +364,7 @@
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: beacon TSF higher than "
"local TSF - IBSS merge with BSSID %pM\n",
- sdata->dev->name, mgmt->bssid);
+ sdata->name, mgmt->bssid);
#endif
ieee80211_sta_join_ibss(sdata, bss);
ieee80211_ibss_add_sta(sdata, mgmt->bssid, mgmt->sa, supp_rates);
@@ -393,7 +393,7 @@
if (local->num_sta >= IEEE80211_IBSS_MAX_STA_ENTRIES) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: No room for a new IBSS STA entry %pM\n",
- sdata->dev->name, addr);
+ sdata->name, addr);
return NULL;
}
@@ -402,7 +402,7 @@
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: Adding new IBSS station %pM (dev=%s)\n",
- wiphy_name(local->hw.wiphy), addr, sdata->dev->name);
+ wiphy_name(local->hw.wiphy), addr, sdata->name);
#endif
sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
@@ -466,7 +466,7 @@
return;
printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other "
- "IBSS networks with same SSID (merge)\n", sdata->dev->name);
+ "IBSS networks with same SSID (merge)\n", sdata->name);
ieee80211_request_internal_scan(sdata, ifibss->ssid, ifibss->ssid_len);
}
@@ -488,13 +488,13 @@
* random number generator get different BSSID. */
get_random_bytes(bssid, ETH_ALEN);
for (i = 0; i < ETH_ALEN; i++)
- bssid[i] ^= sdata->dev->dev_addr[i];
+ bssid[i] ^= sdata->vif.addr[i];
bssid[0] &= ~0x01;
bssid[0] |= 0x02;
}
printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID %pM\n",
- sdata->dev->name, bssid);
+ sdata->name, bssid);
sband = local->hw.wiphy->bands[ifibss->channel->band];
@@ -523,7 +523,7 @@
active_ibss = ieee80211_sta_active_ibss(sdata);
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: sta_find_ibss (active_ibss=%d)\n",
- sdata->dev->name, active_ibss);
+ sdata->name, active_ibss);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
if (active_ibss)
@@ -552,7 +552,7 @@
printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM"
" based on configured SSID\n",
- sdata->dev->name, bss->cbss.bssid);
+ sdata->name, bss->cbss.bssid);
ieee80211_sta_join_ibss(sdata, bss);
ieee80211_rx_bss_put(local, bss);
@@ -571,7 +571,7 @@
} else if (time_after(jiffies, ifibss->last_scan_completed +
IEEE80211_SCAN_INTERVAL)) {
printk(KERN_DEBUG "%s: Trigger new scan to find an IBSS to "
- "join\n", sdata->dev->name);
+ "join\n", sdata->name);
ieee80211_request_internal_scan(sdata, ifibss->ssid,
ifibss->ssid_len);
@@ -585,7 +585,7 @@
return;
}
printk(KERN_DEBUG "%s: IBSS not allowed on"
- " %d MHz\n", sdata->dev->name,
+ " %d MHz\n", sdata->name,
local->hw.conf.channel->center_freq);
/* No IBSS found - decrease scan interval and continue
@@ -619,7 +619,7 @@
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: RX ProbeReq SA=%pM DA=%pM BSSID=%pM"
" (tx_last_beacon=%d)\n",
- sdata->dev->name, mgmt->sa, mgmt->da,
+ sdata->name, mgmt->sa, mgmt->da,
mgmt->bssid, tx_last_beacon);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
@@ -637,7 +637,7 @@
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: Invalid SSID IE in ProbeReq "
"from %pM\n",
- sdata->dev->name, mgmt->sa);
+ sdata->name, mgmt->sa);
#endif
return;
}
@@ -657,7 +657,7 @@
memcpy(resp->da, mgmt->sa, ETH_ALEN);
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: Sending ProbeResp to %pM\n",
- sdata->dev->name, resp->da);
+ sdata->name, resp->da);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
ieee80211_tx_skb(sdata, skb);
@@ -671,7 +671,7 @@
size_t baselen;
struct ieee802_11_elems elems;
- if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN))
+ if (memcmp(mgmt->da, sdata->vif.addr, ETH_ALEN))
return; /* ignore ProbeResp to foreign address */
baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
