Input: add Cypress TTSP capacitive multi-touch screen support

Cypress TrueTouch(tm) Standard Product controllers are found in
a wide range of embedded devices. This driver add support for a
variety of TTSP controllers.

Since the hardware is capable of tracking identifiable contacts, multi-touch
protocol type B (stateful) is used to report contact information.

The driver is composed of a core driver that process the data sent by
the contacts and a set of bus specific interface modules. This patch
adds the base core TTSP driver.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4af2a18..2b21a70 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -139,7 +139,6 @@
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C
 	depends on GPIOLIB
-
 	help
 	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 	  an AAVA device.
@@ -149,6 +148,37 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called cy8ctmg110_ts.
 
+config TOUCHSCREEN_CYTTSP_CORE
+	tristate "Cypress TTSP touchscreen"
+	help
+	  Say Y here if you have a touchscreen using controller from
+	  the Cypress TrueTouch(tm) Standard Product family connected
+	  to your system. You will also need to select appropriate
+	  bus connection below.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_core.
+
+config TOUCHSCREEN_CYTTSP_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
+	help
+	  Say Y here if the touchscreen is connected via I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_i2c.
+
+config TOUCHSCREEN_CYTTSP_SPI
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
+	help
+	  Say Y here if the touchscreen is connected via SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_spi.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 496091e..d9acbdc 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -16,8 +16,11 @@
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC)	+= atmel_tsadcc.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_BU21013)       += bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
new file mode 100644
index 0000000..8be2247
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -0,0 +1,625 @@
+/*
+ * Core Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include "cyttsp_core.h"
+
+/* Bootloader number of command keys */
+#define CY_NUM_BL_KEYS		8
+
+/* helpers */
+#define GET_NUM_TOUCHES(x)		((x) & 0x0F)
+#define IS_LARGE_AREA(x)		(((x) & 0x10) >> 4)
+#define IS_BAD_PKT(x)			((x) & 0x20)
+#define IS_VALID_APP(x)			((x) & 0x01)
+#define IS_OPERATIONAL_ERR(x)		((x) & 0x3F)
+#define GET_HSTMODE(reg)		(((reg) & 0x70) >> 4)
+#define GET_BOOTLOADERMODE(reg)		(((reg) & 0x10) >> 4)
+
+#define CY_REG_BASE			0x00
+#define CY_REG_ACT_DIST			0x1E
+#define CY_REG_ACT_INTRVL		0x1D
+#define CY_REG_TCH_TMOUT		(CY_REG_ACT_INTRVL + 1)
+#define CY_REG_LP_INTRVL		(CY_REG_TCH_TMOUT + 1)
+#define CY_MAXZ				255
+#define CY_DELAY_DFLT			20 /* ms */
+#define CY_DELAY_MAX			500
+#define CY_ACT_DIST_DFLT		0xF8
+#define CY_HNDSHK_BIT			0x80
+/* device mode bits */
+#define CY_OPERATE_MODE			0x00
+#define CY_SYSINFO_MODE			0x10
+/* power mode select bits */
+#define CY_SOFT_RESET_MODE		0x01 /* return to Bootloader mode */
+#define CY_DEEP_SLEEP_MODE		0x02
+#define CY_LOW_POWER_MODE		0x04
+
+/* Slots management */
+#define CY_MAX_FINGER			4
+#define CY_MAX_ID			16
+
+static const u8 bl_command[] = {
+	0x00,			/* file offset */
+	0xFF,			/* command */
+	0xA5,			/* exit bootloader command */
+	0, 1, 2, 3, 4, 5, 6, 7	/* default keys */
+};
+
+static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
+				u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->read(ts, command, length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
+				 u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->write(ts, command, length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_send_command(struct cyttsp *ts, u8 cmd)
+{
+	return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
+}
+
+static int cyttsp_load_bl_regs(struct cyttsp *ts)
+{
+	memset(&ts->bl_data, 0, sizeof(ts->bl_data));
+	ts->bl_data.bl_status = 0x10;
+
+	return ttsp_read_block_data(ts, CY_REG_BASE,
+				    sizeof(ts->bl_data), &ts->bl_data);
+}
+
+static int cyttsp_exit_bl_mode(struct cyttsp *ts)
+{
+	int error;
+	u8 bl_cmd[sizeof(bl_command)];
+
+	memcpy(bl_cmd, bl_command, sizeof(bl_command));
+	if (ts->pdata->bl_keys)
+		memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS],
+			ts->pdata->bl_keys, sizeof(bl_command));
+
+	error = ttsp_write_block_data(ts, CY_REG_BASE,
+				      sizeof(bl_cmd), bl_cmd);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete the operation */
+	msleep(CY_DELAY_DFLT);
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status))
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_operational_mode(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_OPERATE_MODE);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete switch to Operational mode */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0;
+}
+
+static int cyttsp_set_sysinfo_mode(struct cyttsp *ts)
+{
+	int error;
+
+	memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data));
+
+	/* switch to sysinfo mode */
+	error = ttsp_send_command(ts, CY_SYSINFO_MODE);
+	if (error)
+		return error;
+
+	/* read sysinfo registers */
+	msleep(CY_DELAY_DFLT);
+	error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data),
+				      &ts->sysinfo_data);
+	if (error)
+		return error;
+
+	if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl)
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_sysinfo_regs(struct cyttsp *ts)
+{
+	int retval = 0;
+
+	if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT ||
+	    ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT ||
+	    ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) {
+
+		u8 intrvl_ray[] = {
+			ts->pdata->act_intrvl,
+			ts->pdata->tch_tmout,
+			ts->pdata->lp_intrvl
+		};
+
+		/* set intrvl registers */
+		retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL,
+					sizeof(intrvl_ray), intrvl_ray);
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return retval;
+}
+
+static int cyttsp_soft_reset(struct cyttsp *ts)
+{
+	unsigned long timeout;
+	int retval;
+
+	/* wait for interrupt to set ready completion */
+	INIT_COMPLETION(ts->bl_ready);
+	ts->state = CY_BL_STATE;
+
+	enable_irq(ts->irq);
+
+	retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE);
+	if (retval)
+		goto out;
+
+	timeout = wait_for_completion_timeout(&ts->bl_ready,
+			msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX));
+	retval = timeout ? 0 : -EIO;
+
+out:
+	ts->state = CY_IDLE_STATE;
+	disable_irq(ts->irq);
+	return retval;
+}
+
+static int cyttsp_act_dist_setup(struct cyttsp *ts)
+{
+	u8 act_dist_setup = ts->pdata->act_dist;
+
+	/* Init gesture; active distance setup */
+	return ttsp_write_block_data(ts, CY_REG_ACT_DIST,
+				sizeof(act_dist_setup), &act_dist_setup);
+}
+
+static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids)
+{
+	ids[0] = xy_data->touch12_id >> 4;
+	ids[1] = xy_data->touch12_id & 0xF;
+	ids[2] = xy_data->touch34_id >> 4;
+	ids[3] = xy_data->touch34_id & 0xF;
+}
+
+static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data,
+					       int idx)
+{
+	switch (idx) {
+	case 0:
+		return &xy_data->tch1;
+	case 1:
+		return &xy_data->tch2;
+	case 2:
+		return &xy_data->tch3;
+	case 3:
+		return &xy_data->tch4;
+	default:
+		return NULL;
+	}
+}
+
+static void cyttsp_report_tchdata(struct cyttsp *ts)
+{
+	struct cyttsp_xydata *xy_data = &ts->xy_data;
+	struct input_dev *input = ts->input;
+	int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat);
+	const struct cyttsp_tch *tch;
+	int ids[CY_MAX_ID];
+	int i;
+	DECLARE_BITMAP(used, CY_MAX_ID);
+
+	if (IS_LARGE_AREA(xy_data->tt_stat) == 1) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Large area detected\n", __func__);
+	} else if (num_tch > CY_MAX_FINGER) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__);
+	} else if (IS_BAD_PKT(xy_data->tt_mode)) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__);
+	}
+
+	cyttsp_extract_track_ids(xy_data, ids);
+
+	bitmap_zero(used, CY_MAX_ID);
+
+	for (i = 0; i < num_tch; i++) {
+		tch = cyttsp_get_tch(xy_data, i);
+
+		input_mt_slot(input, ids[i]);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+		input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x));
+		input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y));
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z);
+
+		__set_bit(ids[i], used);
+	}
+
+	for (i = 0; i < CY_MAX_ID; i++) {
+		if (test_bit(i, used))
+			continue;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+	}
+
+	input_sync(input);
+}
+
+static irqreturn_t cyttsp_irq(int irq, void *handle)
+{
+	struct cyttsp *ts = handle;
+	int error;
+
+	if (unlikely(ts->state == CY_BL_STATE)) {
+		complete(&ts->bl_ready);
+		goto out;
+	}
+
+	/* Get touch data from CYTTSP device */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				 sizeof(struct cyttsp_xydata), &ts->xy_data);
+	if (error)
+		goto out;
+
+	/* provide flow control handshake */
+	if (ts->pdata->use_hndshk) {
+		error = ttsp_send_command(ts,
+				ts->xy_data.hst_mode ^ CY_HNDSHK_BIT);
+		if (error)
+			goto out;
+	}
+
+	if (unlikely(ts->state == CY_IDLE_STATE))
+		goto out;
+
+	if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) {
+		/*
+		 * TTSP device has reset back to bootloader mode.
+		 * Restore to operational mode.
+		 */
+		error = cyttsp_exit_bl_mode(ts);
+		if (error) {
+			dev_err(ts->dev,
+				"Could not return to operational mode, err: %d\n",
+				error);
+			ts->state = CY_IDLE_STATE;
+		}
+	} else {
+		cyttsp_report_tchdata(ts);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cyttsp_power_on(struct cyttsp *ts)
+{
+	int error;
+
+	error = cyttsp_soft_reset(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) &&
+	    IS_VALID_APP(ts->bl_data.bl_status)) {
+		error = cyttsp_exit_bl_mode(ts);
+		if (error)
+			return error;
+	}
+
+	if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE ||
+	    IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) {
+		return -ENODEV;
+	}
+
+	error = cyttsp_set_sysinfo_mode(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_sysinfo_regs(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_operational_mode(ts);
+	if (error)
+		return error;
+
+	/* init active distance */
+	error = cyttsp_act_dist_setup(ts);
+	if (error)
+		return error;
+
+	ts->state = CY_ACTIVE_STATE;
+
+	return 0;
+}
+
+static int cyttsp_enable(struct cyttsp *ts)
+{
+	int error;
+
+	/*
+	 * The device firmware can wake on an I2C or SPI memory slave
+	 * address match. So just reading a register is sufficient to
+	 * wake up the device. The first read attempt will fail but it
+	 * will wake it up making the second read attempt successful.
+	 */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	if (GET_HSTMODE(ts->xy_data.hst_mode))
+		return -EIO;
+
+	enable_irq(ts->irq);
+
+	return 0;
+}
+
+static int cyttsp_disable(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_LOW_POWER_MODE);
+	if (error)
+		return error;
+
+	disable_irq(ts->irq);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cyttsp_suspend(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+	int retval = 0;
+
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->input->users) {
+		retval = cyttsp_disable(ts);
+		if (retval == 0)
+			ts->suspended = true;
+	}
+
+	mutex_unlock(&ts->input->mutex);
+
+	return retval;
+}
+
+static int cyttsp_resume(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->input->users)
+		cyttsp_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+#endif
+
+SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume);
+EXPORT_SYMBOL_GPL(cyttsp_pm_ops);
+
+static int cyttsp_open(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+	int retval = 0;
+
+	if (!ts->suspended)
+		retval = cyttsp_enable(ts);
+
+	return retval;
+}
+
+static void cyttsp_close(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+
+	if (!ts->suspended)
+		cyttsp_disable(ts);
+}
+
+struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
+			    struct device *dev, int irq, size_t xfer_buf_size)
+{
+	const struct cyttsp_platform_data *pdata = dev->platform_data;
+	struct cyttsp *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!dev || !bus_ops || !pdata || !pdata->name || irq <= 0) {
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->dev = dev;
+	ts->input = input_dev;
+	ts->pdata = dev->platform_data;
+	ts->bus_ops = bus_ops;
+	ts->irq = irq;
+
+	init_completion(&ts->bl_ready);
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
+
+	if (pdata->init) {
+		error = pdata->init();
+		if (error) {
+			dev_err(ts->dev, "platform init failed, err: %d\n",
+				error);
+			goto err_free_mem;
+		}
+	}
+
+	input_dev->name = pdata->name;
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = bus_ops->bustype;
+	input_dev->dev.parent = ts->dev;
+
+	input_dev->open = cyttsp_open;
+	input_dev->close = cyttsp_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, pdata->maxx, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, pdata->maxy, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, CY_MAXZ, 0, 0);
+
+	input_mt_init_slots(input_dev, CY_MAX_ID);
+
+	error = request_threaded_irq(ts->irq, NULL, cyttsp_irq,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				     pdata->name, ts);
+	if (error) {
+		dev_err(ts->dev, "failed to request IRQ %d, err: %d\n",
+			ts->irq, error);
+		goto err_platform_exit;
+	}
+
+	disable_irq(ts->irq);
+
+	error = cyttsp_power_on(ts);
+	if (error)
+		goto err_free_irq;
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(ts->dev, "failed to register input device: %d\n",
+			error);
+		goto err_free_irq;
+	}
+
+	return ts;
+
+err_free_irq:
+	free_irq(ts->irq, ts);
+err_platform_exit:
+	if (pdata->exit)
+		pdata->exit();
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL_GPL(cyttsp_probe);
+
+void cyttsp_remove(struct cyttsp *ts)
+{
+	free_irq(ts->irq, ts);
+	input_unregister_device(ts->input);
+	if (ts->pdata->exit)
+		ts->pdata->exit();
+	kfree(ts);
+}
+EXPORT_SYMBOL_GPL(cyttsp_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h
new file mode 100644
index 0000000..1aa3c69
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_core.h
@@ -0,0 +1,149 @@
+/*
+ * Header file for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+
+#ifndef __CYTTSP_CORE_H__
+#define __CYTTSP_CORE_H__
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/input/cyttsp.h>
+
+#define CY_NUM_RETRY		16 /* max number of retries for read ops */
+
+struct cyttsp_tch {
+	__be16 x, y;
+	u8 z;
+} __packed;
+
+/* TrueTouch Standard Product Gen3 interface definition */
+struct cyttsp_xydata {
+	u8 hst_mode;
+	u8 tt_mode;
+	u8 tt_stat;
+	struct cyttsp_tch tch1;
+	u8 touch12_id;
+	struct cyttsp_tch tch2;
+	u8 gest_cnt;
+	u8 gest_id;
+	struct cyttsp_tch tch3;
+	u8 touch34_id;
+	struct cyttsp_tch tch4;
+	u8 tt_undef[3];
+	u8 act_dist;
+	u8 tt_reserved;
+} __packed;
+
+
+/* TTSP System Information interface definition */
+struct cyttsp_sysinfo_data {
+	u8 hst_mode;
+	u8 mfg_cmd;
+	u8 mfg_stat;
+	u8 cid[3];
+	u8 tt_undef1;
+	u8 uid[8];
+	u8 bl_verh;
+	u8 bl_verl;
+	u8 tts_verh;
+	u8 tts_verl;
+	u8 app_idh;
+	u8 app_idl;
+	u8 app_verh;
+	u8 app_verl;
+	u8 tt_undef[5];
+	u8 scn_typ;
+	u8 act_intrvl;
+	u8 tch_tmout;
+	u8 lp_intrvl;
+};
+
+/* TTSP Bootloader Register Map interface definition */
+#define CY_BL_CHKSUM_OK 0x01
+struct cyttsp_bootloader_data {
+	u8 bl_file;
+	u8 bl_status;
+	u8 bl_error;
+	u8 blver_hi;
+	u8 blver_lo;
+	u8 bld_blver_hi;
+	u8 bld_blver_lo;
+	u8 ttspver_hi;
+	u8 ttspver_lo;
+	u8 appid_hi;
+	u8 appid_lo;
+	u8 appver_hi;
+	u8 appver_lo;
+	u8 cid_0;
+	u8 cid_1;
+	u8 cid_2;
+};
+
+struct cyttsp;
+
+struct cyttsp_bus_ops {
+	u16 bustype;
+	int (*write)(struct cyttsp *ts,
+		     u8 addr, u8 length, const void *values);
+	int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values);
+};
+
+enum cyttsp_state {
+	CY_IDLE_STATE,
+	CY_ACTIVE_STATE,
+	CY_BL_STATE,
+};
+
+struct cyttsp {
+	struct device *dev;
+	int irq;
+	struct input_dev *input;
+	char phys[32];
+	const struct cyttsp_platform_data *pdata;
+	const struct cyttsp_bus_ops *bus_ops;
+	struct cyttsp_bootloader_data bl_data;
+	struct cyttsp_sysinfo_data sysinfo_data;
+	struct cyttsp_xydata xy_data;
+	struct completion bl_ready;
+	enum cyttsp_state state;
+	bool suspended;
+
+	u8 xfer_buf[] ____cacheline_aligned;
+};
+
+struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
+			    struct device *dev, int irq, size_t xfer_buf_size);
+void cyttsp_remove(struct cyttsp *ts);
+
+extern const struct dev_pm_ops cyttsp_pm_ops;
+
+#endif /* __CYTTSP_CORE_H__ */
diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c
new file mode 100644
index 0000000..c7110cc
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_i2c.c
@@ -0,0 +1,146 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+
+#define CY_I2C_DATA_SIZE	128
+
+static int cyttsp_i2c_read_block_data(struct cyttsp *ts,
+				      u8 addr, u8 length, void *values)
+{
+	struct i2c_client *client = to_i2c_client(ts->dev);
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = values,
+		},
+	};
+	int retval;
+
+	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (retval < 0)
+		return retval;
+
+	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
+}
+
+static int cyttsp_i2c_write_block_data(struct cyttsp *ts,
+				       u8 addr, u8 length, const void *values)
+{
+	struct i2c_client *client = to_i2c_client(ts->dev);
+	int retval;
+
+	ts->xfer_buf[0] = addr;
+	memcpy(&ts->xfer_buf[1], values, length);
+
+	retval = i2c_master_send(client, ts->xfer_buf, length + 1);
+
+	return retval < 0 ? retval : 0;
+}
+
+static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.write		= cyttsp_i2c_write_block_data,
+	.read           = cyttsp_i2c_read_block_data,
+};
+
+static int __devinit cyttsp_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct cyttsp *ts;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C functionality not Supported\n");
+		return -EIO;
+	}
+
+	ts = cyttsp_probe(&cyttsp_i2c_bus_ops, &client->dev, client->irq,
+			  CY_I2C_DATA_SIZE);
+
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+static int __devexit cyttsp_i2c_remove(struct i2c_client *client)
+{
+	struct cyttsp *ts = i2c_get_clientdata(client);
+
+	cyttsp_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id cyttsp_i2c_id[] = {
+	{ CY_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
+
+static struct i2c_driver cyttsp_i2c_driver = {
+	.driver = {
+		.name	= CY_I2C_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp_pm_ops,
+	},
+	.probe		= cyttsp_i2c_probe,
+	.remove		= __devexit_p(cyttsp_i2c_remove),
+	.id_table	= cyttsp_i2c_id,
+};
+
+static int __init cyttsp_i2c_init(void)
+{
+	return i2c_add_driver(&cyttsp_i2c_driver);
+}
+module_init(cyttsp_i2c_init);
+
+static void __exit cyttsp_i2c_exit(void)
+{
+	return i2c_del_driver(&cyttsp_i2c_driver);
+}
+module_exit(cyttsp_i2c_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("i2c:cyttsp");
diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
new file mode 100644
index 0000000..9db5f87
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -0,0 +1,210 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#define CY_SPI_WR_OP		0x00 /* r/~w */
+#define CY_SPI_RD_OP		0x01
+#define CY_SPI_CMD_BYTES	4
+#define CY_SPI_SYNC_BYTE	2
+#define CY_SPI_SYNC_ACK1	0x62 /* from protocol v.2 */
+#define CY_SPI_SYNC_ACK2	0x9D /* from protocol v.2 */
+#define CY_SPI_DATA_SIZE	128
+#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+#define CY_SPI_BITS_PER_WORD	8
+
+static int cyttsp_spi_xfer(struct cyttsp *ts,
+			   u8 op, u8 reg, u8 *buf, int length)
+{
+	struct spi_device *spi = to_spi_device(ts->dev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = &ts->xfer_buf[0];
+	u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE];
+	int retval;
+	int i;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_err(ts->dev, "%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE);
+
+	wr_buf[0] = 0x00; /* header byte 0 */
+	wr_buf[1] = 0xFF; /* header byte 1 */
+	wr_buf[2] = reg;  /* reg index */
+	wr_buf[3] = op;   /* r/~w */
+	if (op == CY_SPI_WR_OP)
+		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	switch (op) {
+	case CY_SPI_WR_OP:
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+		break;
+
+	case CY_SPI_RD_OP:
+		xfer[0].len = CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+		break;
+
+	default:
+		dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op);
+		return -EINVAL;
+	}
+
+	retval = spi_sync(spi, &msg);
+	if (retval < 0) {
+		dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
+	    rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
+
+		dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op);
+
+		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
+			dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < length; i++)
+			dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cyttsp_spi_read_block_data(struct cyttsp *ts,
+				      u8 addr, u8 length, void *data)
+{
+	return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length);
+}
+
+static int cyttsp_spi_write_block_data(struct cyttsp *ts,
+				       u8 addr, u8 length, const void *data)
+{
+	return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length);
+}
+
+static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.write		= cyttsp_spi_write_block_data,
+	.read		= cyttsp_spi_read_block_data,
+};
+
+static int __devinit cyttsp_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp *ts;
+	int error;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	error = spi_setup(spi);
+	if (error < 0) {
+		dev_err(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, error);
+		return error;
+	}
+
+	ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
+			  CY_SPI_DATA_BUF_SIZE * 2);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	spi_set_drvdata(spi, ts);
+
+	return 0;
+}
+
+static int __devexit cyttsp_spi_remove(struct spi_device *spi)
+{
+	struct cyttsp *ts = spi_get_drvdata(spi);
+
+	cyttsp_remove(ts);
+
+	return 0;
+}
+
+static struct spi_driver cyttsp_spi_driver = {
+	.driver = {
+		.name	= CY_SPI_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp_pm_ops,
+	},
+	.probe  = cyttsp_spi_probe,
+	.remove = __devexit_p(cyttsp_spi_remove),
+};
+
+static int __init cyttsp_spi_init(void)
+{
+	return spi_register_driver(&cyttsp_spi_driver);
+}
+module_init(cyttsp_spi_init);
+
+static void __exit cyttsp_spi_exit(void)
+{
+	spi_unregister_driver(&cyttsp_spi_driver);
+}
+module_exit(cyttsp_spi_exit);
+
+MODULE_ALIAS("spi:cyttsp");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("spi:cyttsp");