ide-tape: remove struct idetape_parameter_block_descriptor_t
Also, shorten function name idetape_get_blocksize_from_block_descriptor() and
move its definition up thereby getting rid of its forward declaration.
Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 32f56ee..2a4a652 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -678,18 +678,6 @@
#define IDETAPE_BUFFER_FILLING_PAGE 0x33
/*
- * Mode Parameter Block Descriptor the MODE SENSE packet command
- *
- * Support for block descriptors is optional.
- */
-typedef struct {
- __u8 density_code; /* Medium density code */
- __u8 blocks[3]; /* Number of blocks */
- __u8 reserved4; /* Reserved */
- __u8 length[3]; /* Block Length */
-} idetape_parameter_block_descriptor_t;
-
-/*
* Run time configurable parameters.
*/
typedef struct {
@@ -3503,7 +3491,30 @@
}
}
-static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive);
+/*
+ * Do a mode sense page 0 with block descriptor and if it succeeds set the tape
+ * block size with the reported value.
+ */
+static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
+{
+ idetape_tape_t *tape = drive->driver_data;
+ idetape_pc_t pc;
+
+ idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
+ if (idetape_queue_pc_tail(drive, &pc)) {
+ printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
+ if (tape->tape_block_size == 0) {
+ printk(KERN_WARNING "ide-tape: Cannot deal with zero "
+ "block size, assuming 32k\n");
+ tape->tape_block_size = 32768;
+ }
+ return;
+ }
+ tape->tape_block_size = (pc.buffer[4 + 5] << 16) +
+ (pc.buffer[4 + 6] << 8) +
+ pc.buffer[4 + 7];
+ tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
+}
/*
* Our character device open function.
@@ -3557,7 +3568,7 @@
clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
/* Read block size and write protect status from drive. */
- idetape_get_blocksize_from_block_descriptor(drive);
+ ide_tape_get_bsize_from_bdesc(drive);
/* Set write protect flag if device is opened as read-only. */
if ((filp->f_flags & O_ACCMODE) == O_RDONLY)
@@ -3771,31 +3782,6 @@
tape->tape_block_size = 1024;
}
-/*
- * ide_get_blocksize_from_block_descriptor does a mode sense page 0 with block descriptor
- * and if it succeeds sets the tape block size with the reported value
- */
-static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive)
-{
-
- idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
- idetape_parameter_block_descriptor_t *block_descrp;
-
- idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
- if (idetape_queue_pc_tail(drive, &pc)) {
- printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
- if (tape->tape_block_size == 0) {
- printk(KERN_WARNING "ide-tape: Cannot deal with zero block size, assume 32k\n");
- tape->tape_block_size = 32768;
- }
- return;
- }
- block_descrp = (idetape_parameter_block_descriptor_t *)(pc.buffer + 4);
- tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2];
- tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
-}
-
#ifdef CONFIG_IDE_PROC_FS
static void idetape_add_settings (ide_drive_t *drive)
{
@@ -3872,7 +3858,7 @@
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
- idetape_get_blocksize_from_block_descriptor(drive);
+ ide_tape_get_bsize_from_bdesc(drive);
tape->user_bs_factor = 1;
tape->stage_size = *ctl * tape->tape_block_size;
while (tape->stage_size > 0xffff) {
