| /* |
| * Copyright (C) 1991, 1992, 1995 Linus Torvalds |
| * |
| * This file contains the PC-specific time handling details: |
| * reading the RTC at bootup, etc.. |
| * 1994-07-02 Alan Modra |
| * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime |
| * 1995-03-26 Markus Kuhn |
| * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887 |
| * precision CMOS clock update |
| * 1996-05-03 Ingo Molnar |
| * fixed time warps in do_[slow|fast]_gettimeoffset() |
| * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 |
| * "A Kernel Model for Precision Timekeeping" by Dave Mills |
| * 1998-09-05 (Various) |
| * More robust do_fast_gettimeoffset() algorithm implemented |
| * (works with APM, Cyrix 6x86MX and Centaur C6), |
| * monotonic gettimeofday() with fast_get_timeoffset(), |
| * drift-proof precision TSC calibration on boot |
| * (C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D. |
| * Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>; |
| * ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>). |
| * 1998-12-16 Andrea Arcangeli |
| * Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy |
| * because was not accounting lost_ticks. |
| * 1998-12-24 Copyright (C) 1998 Andrea Arcangeli |
| * Fixed a xtime SMP race (we need the xtime_lock rw spinlock to |
| * serialize accesses to xtime/lost_ticks). |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/time.h> |
| #include <linux/mca.h> |
| |
| #include <asm/arch_hooks.h> |
| #include <asm/hpet.h> |
| #include <asm/time.h> |
| #include <asm/timer.h> |
| |
| #include "do_timer.h" |
| |
| int timer_ack; |
| |
| unsigned long profile_pc(struct pt_regs *regs) |
| { |
| unsigned long pc = instruction_pointer(regs); |
| |
| #ifdef CONFIG_SMP |
| if (!user_mode_vm(regs) && in_lock_functions(pc)) { |
| #ifdef CONFIG_FRAME_POINTER |
| return *(unsigned long *)(regs->bp + sizeof(long)); |
| #else |
| unsigned long *sp = (unsigned long *)®s->sp; |
| |
| /* Return address is either directly at stack pointer |
| or above a saved flags. Eflags has bits 22-31 zero, |
| kernel addresses don't. */ |
| if (sp[0] >> 22) |
| return sp[0]; |
| if (sp[1] >> 22) |
| return sp[1]; |
| #endif |
| } |
| #endif |
| return pc; |
| } |
| EXPORT_SYMBOL(profile_pc); |
| |
| /* |
| * This is the same as the above, except we _also_ save the current |
| * Time Stamp Counter value at the time of the timer interrupt, so that |
| * we later on can estimate the time of day more exactly. |
| */ |
| irqreturn_t timer_interrupt(int irq, void *dev_id) |
| { |
| /* Keep nmi watchdog up to date */ |
| inc_irq_stat(irq0_irqs); |
| |
| #ifdef CONFIG_X86_IO_APIC |
| if (timer_ack) { |
| /* |
| * Subtle, when I/O APICs are used we have to ack timer IRQ |
| * manually to deassert NMI lines for the watchdog if run |
| * on an 82489DX-based system. |
| */ |
| spin_lock(&i8259A_lock); |
| outb(0x0c, PIC_MASTER_OCW3); |
| /* Ack the IRQ; AEOI will end it automatically. */ |
| inb(PIC_MASTER_POLL); |
| spin_unlock(&i8259A_lock); |
| } |
| #endif |
| |
| do_timer_interrupt_hook(); |
| |
| #ifdef CONFIG_MCA |
| if (MCA_bus) { |
| /* The PS/2 uses level-triggered interrupts. You can't |
| turn them off, nor would you want to (any attempt to |
| enable edge-triggered interrupts usually gets intercepted by a |
| special hardware circuit). Hence we have to acknowledge |
| the timer interrupt. Through some incredibly stupid |
| design idea, the reset for IRQ 0 is done by setting the |
| high bit of the PPI port B (0x61). Note that some PS/2s, |
| notably the 55SX, work fine if this is removed. */ |
| |
| u8 irq_v = inb_p(0x61); /* read the current state */ |
| outb_p(irq_v | 0x80, 0x61); /* reset the IRQ */ |
| } |
| #endif |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Duplicate of time_init() below, with hpet_enable part added */ |
| void __init hpet_time_init(void) |
| { |
| if (!hpet_enable()) |
| setup_pit_timer(); |
| time_init_hook(); |
| } |
| |
| /* |
| * This is called directly from init code; we must delay timer setup in the |
| * HPET case as we can't make the decision to turn on HPET this early in the |
| * boot process. |
| * |
| * The chosen time_init function will usually be hpet_time_init, above, but |
| * in the case of virtual hardware, an alternative function may be substituted. |
| */ |
| void __init time_init(void) |
| { |
| pre_time_init_hook(); |
| tsc_init(); |
| late_time_init = choose_time_init(); |
| } |