watchdog: hpwdt (4/12): Despecificate driver from iLO2
This driver supports both iLO2 and iLO3, but our user-visible strings
currently only reference iLO2. Let's just call it "iLO2+" to avoid having
to update strings for each iLO generation. This driver doesn't support
iLO ASICs prior to iLO2, but that is sufficiently explained in Kconfig.
Signed-off-by: dann frazier <dannf@hp.com>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4d2992a..cee25e4 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -574,11 +574,11 @@
be called it87_wdt.
config HP_WATCHDOG
- tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+ tristate "HP Proliant iLO2+ Hardware Watchdog Timer"
depends on X86
help
A software monitoring watchdog and NMI sourcing driver. This driver
- will detect lockups and provide stack trace. Also, when an NMI
+ will detect lockups and provide a stack trace. Also, when an NMI
occurs this driver will make the necessary BIOS calls to log
the cause of the NMI. This is a driver that will only load on a
HP ProLiant system with a minimum of iLO2 support.
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index f0ecb14..e18f6b9 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -48,8 +48,8 @@
static unsigned long __iomem *hpwdt_timer_con;
static struct pci_device_id hpwdt_devices[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) },
- { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) },
+ { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) }, /* iLO2 */
+ { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) }, /* iLO3 */
{0}, /* terminate list */
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
@@ -548,7 +548,7 @@
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
- .identity = "HP iLO2 HW Watchdog Timer",
+ .identity = "HP iLO2+ HW Watchdog Timer",
};
static long hpwdt_ioctl(struct file *file, unsigned int cmd,
@@ -654,13 +654,13 @@
hpwdt_check_nmi_sourcing(dev);
/*
- * First let's find out if we are on an iLO2 server. We will
+ * First let's find out if we are on an iLO2+ server. We will
* not run on a legacy ASM box.
* So we only support the G5 ProLiant servers and higher.
*/
if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
dev_warn(&dev->dev,
- "This server does not have an iLO2 ASIC.\n");
+ "This server does not have an iLO2+ ASIC.\n");
return -ENODEV;
}
@@ -674,7 +674,7 @@
pci_mem_addr = pci_iomap(dev, 1, 0x80);
if (!pci_mem_addr) {
dev_warn(&dev->dev,
- "Unable to detect the iLO2 server memory.\n");
+ "Unable to detect the iLO2+ server memory.\n");
retval = -ENOMEM;
goto error_pci_iomap;
}
