USB: langwell: USB Client Remote Wakeup Support
Remote wakeup support in client driver. Made non-debug only this time.
Signed-off-by: JiebingLi <jiebing.li@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 8b92e22..4b134ab 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -1815,6 +1815,36 @@
static DEVICE_ATTR(langwell_udc, S_IRUGO, show_langwell_udc, NULL);
+/* device "remote_wakeup" sysfs attribute file */
+static ssize_t store_remote_wakeup(struct device *_dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct langwell_udc *dev = the_controller;
+ unsigned long flags;
+ ssize_t rc = count;
+
+ if (count > 2)
+ return -EINVAL;
+
+ if (count > 0 && buf[count-1] == '\n')
+ ((char *) buf)[count-1] = 0;
+
+ if (buf[0] != '1')
+ return -EINVAL;
+
+ /* force remote wakeup enabled in case gadget driver doesn't support */
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->remote_wakeup = 1;
+ dev->dev_status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ langwell_wakeup(&dev->gadget);
+
+ return rc;
+}
+static DEVICE_ATTR(remote_wakeup, S_IWUSR, NULL, store_remote_wakeup);
+
+
/*-------------------------------------------------------------------------*/
/*
@@ -2136,8 +2166,7 @@
if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
/* get device status */
- status_data = 1 << USB_DEVICE_SELF_POWERED;
- status_data |= dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+ status_data = dev->dev_status;
} else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
/* get interface status */
status_data = 0;
@@ -2275,6 +2304,22 @@
} else if ((setup->bRequestType & (USB_RECIP_MASK
| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
| USB_TYPE_STANDARD)) {
+ rc = 0;
+ switch (wValue) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ if (setup->bRequest == USB_REQ_SET_FEATURE) {
+ dev->remote_wakeup = 1;
+ dev->dev_status |= (1 << wValue);
+ } else {
+ dev->remote_wakeup = 0;
+ dev->dev_status &= ~(1 << wValue);
+ }
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ break;
+ }
+
if (!gadget_is_otg(&dev->gadget))
break;
else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) {
@@ -2290,7 +2335,6 @@
dev->gadget.a_alt_hnp_support = 1;
else
break;
- rc = 0;
} else
break;
@@ -2678,7 +2722,10 @@
dev->ep0_dir = USB_DIR_OUT;
dev->ep0_state = WAIT_FOR_SETUP;
- dev->remote_wakeup = 0; /* default to 0 on reset */
+
+ /* remote wakeup reset to 0 when the device is reset */
+ dev->remote_wakeup = 0;
+ dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
dev->gadget.b_hnp_enable = 0;
dev->gadget.a_hnp_support = 0;
dev->gadget.a_alt_hnp_support = 0;
@@ -2997,6 +3044,7 @@
device_unregister(&dev->gadget.dev);
device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
+ device_remove_file(&pdev->dev, &dev_attr_remote_wakeup);
#ifndef OTG_TRANSCEIVER
pci_set_drvdata(pdev, NULL);
@@ -3177,7 +3225,10 @@
dev->resume_state = USB_STATE_NOTATTACHED;
dev->usb_state = USB_STATE_POWERED;
dev->ep0_dir = USB_DIR_OUT;
- dev->remote_wakeup = 0; /* default to 0 on reset */
+
+ /* remote wakeup reset to 0 when the device is reset */
+ dev->remote_wakeup = 0;
+ dev->dev_status = 1 << USB_DEVICE_SELF_POWERED;
#ifndef OTG_TRANSCEIVER
/* reset device controller */
@@ -3247,9 +3298,15 @@
if (retval)
goto error;
+ retval = device_create_file(&pdev->dev, &dev_attr_remote_wakeup);
+ if (retval)
+ goto error_attr1;
+
dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
return 0;
+error_attr1:
+ device_remove_file(&pdev->dev, &dev_attr_langwell_udc);
error:
if (dev) {
dev_dbg(&dev->pdev->dev, "<--- %s()\n", __func__);
diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h
index 9719934..3d3206e 100644
--- a/drivers/usb/gadget/langwell_udc.h
+++ b/drivers/usb/gadget/langwell_udc.h
@@ -224,5 +224,8 @@
/* make sure release() is done */
struct completion *done;
+
+ /* device status data for get_status request */
+ u16 dev_status;
};
