[SCSI] hpsa: Allow multiple command completions per interrupt.
This is done by adding support for the so-called "performant mode"
(that's really what they called it). Smart Array controllers
have a mode which enables multiple command completions to be
delivered with a single interrupt, "performant" mode. We want to use
that mode, as some newer controllers will be requiring this mode.
Signed-off-by: Don Brace <brace@beardog.cce.hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 314854b..e518766 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -150,6 +150,11 @@
struct CommandList *c);
static void check_ioctl_unit_attention(struct ctlr_info *h,
struct CommandList *c);
+/* performant mode helper functions */
+static void calc_bucket_map(int *bucket, int num_buckets,
+ int nsgs, int *bucket_map);
+static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
+static inline u32 next_command(struct ctlr_info *h);
static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
@@ -173,10 +178,8 @@
.name = "hpsa",
.proc_name = "hpsa",
.queuecommand = hpsa_scsi_queue_command,
- .can_queue = 512,
.this_id = -1,
.sg_tablesize = MAXSGENTRIES,
- .cmd_per_lun = 512,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = hpsa_eh_device_reset_handler,
.ioctl = hpsa_ioctl,
@@ -394,10 +397,44 @@
hlist_add_head(&c->list, list);
}
+static inline u32 next_command(struct ctlr_info *h)
+{
+ u32 a;
+
+ if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+ return h->access.command_completed(h);
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ a = *(h->reply_pool_head); /* Next cmd in ring buffer */
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ a = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+ return a;
+}
+
+/* set_performant_mode: Modify the tag for cciss performant
+ * set bit 0 for pull model, bits 3-1 for block fetch
+ * register number
+ */
+static void set_performant_mode(struct ctlr_info *h, struct CommandList *c)
+{
+ if (likely(h->transMethod == CFGTBL_Trans_Performant))
+ c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
+}
+
static void enqueue_cmd_and_start_io(struct ctlr_info *h,
struct CommandList *c)
{
unsigned long flags;
+
+ set_performant_mode(h, c);
spin_lock_irqsave(&h->lock, flags);
addQ(&h->reqQ, c);
h->Qdepth++;
@@ -1116,9 +1153,11 @@
sh->max_cmd_len = MAX_COMMAND_SIZE;
sh->max_lun = HPSA_MAX_LUN;
sh->max_id = HPSA_MAX_LUN;
+ sh->can_queue = h->nr_cmds;
+ sh->cmd_per_lun = h->nr_cmds;
h->scsi_host = sh;
sh->hostdata[0] = (unsigned long) h;
- sh->irq = h->intr[SIMPLE_MODE_INT];
+ sh->irq = h->intr[PERF_MODE_INT];
sh->unique_id = sh->irq;
error = scsi_add_host(sh, &h->pdev->dev);
if (error)
@@ -1843,7 +1882,8 @@
c->scsi_cmd = cmd;
c->Header.ReplyQueue = 0; /* unused in simple mode */
memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
+ c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT);
+ c->Header.Tag.lower |= DIRECT_LOOKUP_BIT;
/* Fill in the request block... */
@@ -2700,8 +2740,9 @@
static inline long interrupt_not_for_us(struct ctlr_info *h)
{
- return ((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0));
+ return !(h->msi_vector || h->msix_vector) &&
+ ((h->access.intr_pending(h) == 0) ||
+ (h->interrupts_enabled == 0));
}
static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
@@ -2725,13 +2766,13 @@
static inline u32 hpsa_tag_contains_index(u32 tag)
{
-#define DIRECT_LOOKUP_BIT 0x04
+#define DIRECT_LOOKUP_BIT 0x10
return tag & DIRECT_LOOKUP_BIT;
}
static inline u32 hpsa_tag_to_index(u32 tag)
{
-#define DIRECT_LOOKUP_SHIFT 3
+#define DIRECT_LOOKUP_SHIFT 5
return tag >> DIRECT_LOOKUP_SHIFT;
}
@@ -2741,42 +2782,61 @@
return tag & ~HPSA_ERROR_BITS;
}
+/* process completion of an indexed ("direct lookup") command */
+static inline u32 process_indexed_cmd(struct ctlr_info *h,
+ u32 raw_tag)
+{
+ u32 tag_index;
+ struct CommandList *c;
+
+ tag_index = hpsa_tag_to_index(raw_tag);
+ if (bad_tag(h, tag_index, raw_tag))
+ return next_command(h);
+ c = h->cmd_pool + tag_index;
+ finish_cmd(c, raw_tag);
+ return next_command(h);
+}
+
+/* process completion of a non-indexed command */
+static inline u32 process_nonindexed_cmd(struct ctlr_info *h,
+ u32 raw_tag)
+{
+ u32 tag;
+ struct CommandList *c = NULL;
+ struct hlist_node *tmp;
+
+ tag = hpsa_tag_discard_error_bits(raw_tag);
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) {
+ finish_cmd(c, raw_tag);
+ return next_command(h);
+ }
+ }
+ bad_tag(h, h->nr_cmds + 1, raw_tag);
+ return next_command(h);
+}
+
static irqreturn_t do_hpsa_intr(int irq, void *dev_id)
{
struct ctlr_info *h = dev_id;
- struct CommandList *c;
unsigned long flags;
- u32 raw_tag, tag, tag_index;
- struct hlist_node *tmp;
+ u32 raw_tag;
if (interrupt_not_for_us(h))
return IRQ_NONE;
spin_lock_irqsave(&h->lock, flags);
- while (interrupt_pending(h)) {
- while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) {
- if (likely(hpsa_tag_contains_index(raw_tag))) {
- tag_index = hpsa_tag_to_index(raw_tag);
- if (bad_tag(h, tag_index, raw_tag))
- return IRQ_HANDLED;
- c = h->cmd_pool + tag_index;
- finish_cmd(c, raw_tag);
- continue;
- }
- tag = hpsa_tag_discard_error_bits(raw_tag);
- c = NULL;
- hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
- if (c->busaddr == tag) {
- finish_cmd(c, raw_tag);
- break;
- }
- }
- }
+ raw_tag = get_next_completion(h);
+ while (raw_tag != FIFO_EMPTY) {
+ if (hpsa_tag_contains_index(raw_tag))
+ raw_tag = process_indexed_cmd(h, raw_tag);
+ else
+ raw_tag = process_nonindexed_cmd(h, raw_tag);
}
spin_unlock_irqrestore(&h->lock, flags);
return IRQ_HANDLED;
}
-/* Send a message CDB to the firmware. */
+/* Send a message CDB to the firmwart. */
static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
unsigned char type)
{
@@ -3108,7 +3168,7 @@
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- h->intr[SIMPLE_MODE_INT] = pdev->irq;
+ h->intr[PERF_MODE_INT] = pdev->irq;
}
static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
@@ -3118,6 +3178,7 @@
u64 cfg_offset;
u32 cfg_base_addr;
u64 cfg_base_addr_index;
+ u32 trans_offset;
int i, prod_index, err;
subsystem_vendor_id = pdev->subsystem_vendor;
@@ -3211,11 +3272,14 @@
h->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) + cfg_offset,
sizeof(h->cfgtable));
+ /* Find performant mode table. */
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ h->transtable = remap_pci_mem(pci_resource_start(pdev,
+ cfg_base_addr_index)+cfg_offset+trans_offset,
+ sizeof(*h->transtable));
+
h->board_id = board_id;
-
- /* Query controller for max supported commands: */
- h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
-
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
h->product_name = products[prod_index].product_name;
h->access = *(products[prod_index].access);
/* Allow room for some ioctls */
@@ -3314,7 +3378,12 @@
}
}
- BUILD_BUG_ON(sizeof(struct CommandList) % 8);
+ /* Command structures must be aligned on a 32-byte boundary because
+ * the 5 lower bits of the address are used by the hardware. and by
+ * the driver. See comments in hpsa.h for more info.
+ */
+#define COMMANDLIST_ALIGNMENT 32
+ BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
h = kzalloc(sizeof(*h), GFP_KERNEL);
if (!h)
return -ENOMEM;
@@ -3349,17 +3418,17 @@
/* make sure the board interrupts are off */
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- rc = request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr,
- IRQF_DISABLED | IRQF_SHARED, h->devname, h);
+ rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr,
+ IRQF_DISABLED, h->devname, h);
if (rc) {
dev_err(&pdev->dev, "unable to get irq %d for %s\n",
- h->intr[SIMPLE_MODE_INT], h->devname);
+ h->intr[PERF_MODE_INT], h->devname);
goto clean2;
}
- dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
- h->devname, pdev->device, pci_name(pdev),
- h->intr[SIMPLE_MODE_INT], dac ? "" : " not");
+ dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
+ h->devname, pdev->device,
+ h->intr[PERF_MODE_INT], dac ? "" : " not");
h->cmd_pool_bits =
kmalloc(((h->nr_cmds + BITS_PER_LONG -
@@ -3389,6 +3458,7 @@
/* Turn the interrupts on so we can service requests */
h->access.set_intr_mask(h, HPSA_INTR_ON);
+ hpsa_put_ctlr_into_performant_mode(h);
hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
h->busy_initializing = 0;
return 1;
@@ -3404,7 +3474,7 @@
h->nr_cmds * sizeof(struct ErrorInfo),
h->errinfo_pool,
h->errinfo_pool_dhandle);
- free_irq(h->intr[SIMPLE_MODE_INT], h);
+ free_irq(h->intr[PERF_MODE_INT], h);
clean2:
clean1:
h->busy_initializing = 0;
@@ -3448,7 +3518,7 @@
*/
hpsa_flush_cache(h);
h->access.set_intr_mask(h, HPSA_INTR_OFF);
- free_irq(h->intr[2], h);
+ free_irq(h->intr[PERF_MODE_INT], h);
#ifdef CONFIG_PCI_MSI
if (h->msix_vector)
pci_disable_msix(h->pdev);
@@ -3477,7 +3547,10 @@
pci_free_consistent(h->pdev,
h->nr_cmds * sizeof(struct ErrorInfo),
h->errinfo_pool, h->errinfo_pool_dhandle);
+ pci_free_consistent(h->pdev, h->reply_pool_size,
+ h->reply_pool, h->reply_pool_dhandle);
kfree(h->cmd_pool_bits);
+ kfree(h->blockFetchTable);
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
@@ -3509,6 +3582,129 @@
.resume = hpsa_resume,
};
+/* Fill in bucket_map[], given nsgs (the max number of
+ * scatter gather elements supported) and bucket[],
+ * which is an array of 8 integers. The bucket[] array
+ * contains 8 different DMA transfer sizes (in 16
+ * byte increments) which the controller uses to fetch
+ * commands. This function fills in bucket_map[], which
+ * maps a given number of scatter gather elements to one of
+ * the 8 DMA transfer sizes. The point of it is to allow the
+ * controller to only do as much DMA as needed to fetch the
+ * command, with the DMA transfer size encoded in the lower
+ * bits of the command address.
+ */
+static void calc_bucket_map(int bucket[], int num_buckets,
+ int nsgs, int *bucket_map)
+{
+ int i, j, b, size;
+
+ /* even a command with 0 SGs requires 4 blocks */
+#define MINIMUM_TRANSFER_BLOCKS 4
+#define NUM_BUCKETS 8
+ /* Note, bucket_map must have nsgs+1 entries. */
+ for (i = 0; i <= nsgs; i++) {
+ /* Compute size of a command with i SG entries */
+ size = i + MINIMUM_TRANSFER_BLOCKS;
+ b = num_buckets; /* Assume the biggest bucket */
+ /* Find the bucket that is just big enough */
+ for (j = 0; j < 8; j++) {
+ if (bucket[j] >= size) {
+ b = j;
+ break;
+ }
+ }
+ /* for a command with i SG entries, use bucket b. */
+ bucket_map[i] = b;
+ }
+}
+
+static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
+{
+ u32 trans_support;
+ u64 trans_offset;
+ /* 5 = 1 s/g entry or 4k
+ * 6 = 2 s/g entry or 8k
+ * 8 = 4 s/g entry or 16k
+ * 10 = 6 s/g entry or 24k
+ */
+ int bft[8] = {5, 6, 8, 10, 12, 20, 28, 35}; /* for scatter/gathers */
+ int i = 0;
+ int l = 0;
+ unsigned long register_value;
+
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & PERFORMANT_MODE))
+ return;
+
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+ h->max_sg_entries = 32;
+ /* Performant mode ring buffer and supporting data structures */
+ h->reply_pool_size = h->max_commands * sizeof(u64);
+ h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size,
+ &(h->reply_pool_dhandle));
+
+ /* Need a block fetch table for performant mode */
+ h->blockFetchTable = kmalloc(((h->max_sg_entries+1) *
+ sizeof(u32)), GFP_KERNEL);
+
+ if ((h->reply_pool == NULL)
+ || (h->blockFetchTable == NULL))
+ goto clean_up;
+
+ h->reply_pool_wraparound = 1; /* spec: init to 1 */
+
+ /* Controller spec: zero out this buffer. */
+ memset(h->reply_pool, 0, h->reply_pool_size);
+ h->reply_pool_head = h->reply_pool;
+
+ trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+ bft[7] = h->max_sg_entries + 4;
+ calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable);
+ for (i = 0; i < 8; i++)
+ writel(bft[i], &h->transtable->BlockFetch[i]);
+
+ /* size of controller ring buffer */
+ writel(h->max_commands, &h->transtable->RepQSize);
+ writel(1, &h->transtable->RepQCount);
+ writel(0, &h->transtable->RepQCtrAddrLow32);
+ writel(0, &h->transtable->RepQCtrAddrHigh32);
+ writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
+ writel(0, &h->transtable->RepQAddr0High32);
+ writel(CFGTBL_Trans_Performant,
+ &(h->cfgtable->HostWrite.TransportRequest));
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ /* under certain very rare conditions, this can take awhile.
+ * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+ * as we enter this code.) */
+ for (l = 0; l < MAX_CONFIG_WAIT; l++) {
+ register_value = readl(h->vaddr + SA5_DOORBELL);
+ if (!(register_value & CFGTBL_ChangeReq))
+ break;
+ /* delay and try again */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(10);
+ }
+ register_value = readl(&(h->cfgtable->TransportActive));
+ if (!(register_value & CFGTBL_Trans_Performant)) {
+ dev_warn(&h->pdev->dev, "unable to get board into"
+ " performant mode\n");
+ return;
+ }
+
+ /* Change the access methods to the performant access methods */
+ h->access = SA5_performant_access;
+ h->transMethod = CFGTBL_Trans_Performant;
+
+ return;
+
+clean_up:
+ if (h->reply_pool)
+ pci_free_consistent(h->pdev, h->reply_pool_size,
+ h->reply_pool, h->reply_pool_dhandle);
+ kfree(h->blockFetchTable);
+}
+
/*
* This is it. Register the PCI driver information for the cards we control
* the OS will call our registered routines when it finds one of our cards.
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 0eab386..0ba1aa3 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -60,14 +60,15 @@
unsigned long paddr;
int nr_cmds; /* Number of commands allowed on this controller */
struct CfgTable __iomem *cfgtable;
+ int max_sg_entries;
int interrupts_enabled;
int major;
int max_commands;
int commands_outstanding;
int max_outstanding; /* Debug */
int usage_count; /* number of opens all all minor devices */
-# define DOORBELL_INT 0
-# define PERF_MODE_INT 1
+# define PERF_MODE_INT 0
+# define DOORBELL_INT 1
# define SIMPLE_MODE_INT 2
# define MEMQ_MODE_INT 3
unsigned int intr[4];
@@ -102,6 +103,23 @@
int ndevices; /* number of used elements in .dev[] array. */
#define HPSA_MAX_SCSI_DEVS_PER_HBA 256
struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+ /*
+ * Performant mode tables.
+ */
+ u32 trans_support;
+ u32 trans_offset;
+ struct TransTable_struct *transtable;
+ unsigned long transMethod;
+
+ /*
+ * Performant mode completion buffer
+ */
+ u64 *reply_pool;
+ dma_addr_t reply_pool_dhandle;
+ u64 *reply_pool_head;
+ size_t reply_pool_size;
+ unsigned char reply_pool_wraparound;
+ u32 *blockFetchTable;
};
#define HPSA_ABORT_MSG 0
#define HPSA_DEVICE_RESET_MSG 1
@@ -165,6 +183,16 @@
#define HPSA_ERROR_BIT 0x02
+/* Performant mode flags */
+#define SA5_PERF_INTR_PENDING 0x04
+#define SA5_PERF_INTR_OFF 0x05
+#define SA5_OUTDB_STATUS_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_CLEAR 0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT 0x01
+#define SA5_OUTDB_STATUS 0x9C
+
+
#define HPSA_INTR_ON 1
#define HPSA_INTR_OFF 0
/*
@@ -173,7 +201,8 @@
static void SA5_submit_command(struct ctlr_info *h,
struct CommandList *c)
{
- dev_dbg(&h->pdev->dev, "Sending %x\n", c->busaddr);
+ dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
+ c->Header.Tag.lower);
writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
h->commands_outstanding++;
if (h->commands_outstanding > h->max_outstanding)
@@ -196,6 +225,52 @@
h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
}
}
+
+static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+ if (val) { /* turn on interrupts */
+ h->interrupts_enabled = 1;
+ writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ } else {
+ h->interrupts_enabled = 0;
+ writel(SA5_PERF_INTR_OFF,
+ h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+ }
+}
+
+static unsigned long SA5_performant_completed(struct ctlr_info *h)
+{
+ unsigned long register_value = FIFO_EMPTY;
+
+ /* flush the controller write of the reply queue by reading
+ * outbound doorbell status register.
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ /* msi auto clears the interrupt pending bit. */
+ if (!(h->msi_vector || h->msix_vector)) {
+ writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+ /* Do a read in order to flush the write to the controller
+ * (as per spec.)
+ */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ }
+
+ if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+ register_value = *(h->reply_pool_head);
+ (h->reply_pool_head)++;
+ h->commands_outstanding--;
+ } else {
+ register_value = FIFO_EMPTY;
+ }
+ /* Check for wraparound */
+ if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+ h->reply_pool_head = h->reply_pool;
+ h->reply_pool_wraparound ^= 1;
+ }
+
+ return register_value;
+}
+
/*
* Returns true if fifo is full.
*
@@ -241,6 +316,20 @@
return register_value & SA5_INTR_PENDING;
}
+static bool SA5_performant_intr_pending(struct ctlr_info *h)
+{
+ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+ if (!register_value)
+ return false;
+
+ if (h->msi_vector || h->msix_vector)
+ return true;
+
+ /* Read outbound doorbell to flush */
+ register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+ return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
static struct access_method SA5_access = {
SA5_submit_command,
@@ -250,14 +339,19 @@
SA5_completed,
};
+static struct access_method SA5_performant_access = {
+ SA5_submit_command,
+ SA5_performant_intr_mask,
+ SA5_fifo_full,
+ SA5_performant_intr_pending,
+ SA5_performant_completed,
+};
+
struct board_type {
u32 board_id;
char *product_name;
struct access_method *access;
};
-
-/* end of old hpsa_scsi.h file */
-
#endif /* HPSA_H */
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 88bb3b0..3e0abdf 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -101,6 +101,7 @@
#define CFGTBL_AccCmds 0x00000001l
#define CFGTBL_Trans_Simple 0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
#define CFGTBL_BusType_Ultra2 0x00000001l
#define CFGTBL_BusType_Ultra3 0x00000002l
@@ -267,12 +268,31 @@
#define CMD_IOCTL_PEND 0x01
#define CMD_SCSI 0x03
-struct ctlr_info; /* defined in hpsa.h */
-/* The size of this structure needs to be divisible by 8
- * on all architectures, because the controller uses 2
- * lower bits of the address, and the driver uses 1 lower
- * bit (3 bits total.)
+/* This structure needs to be divisible by 32 for new
+ * indexing method and performant mode.
*/
+#define PAD32 32
+#define PAD64DIFF 0
+#define USEEXTRA ((sizeof(void *) - 4)/4)
+#define PADSIZE (PAD32 + PAD64DIFF * USEEXTRA)
+
+#define DIRECT_LOOKUP_SHIFT 5
+#define DIRECT_LOOKUP_BIT 0x10
+
+#define HPSA_ERROR_BIT 0x02
+struct ctlr_info; /* defined in hpsa.h */
+/* The size of this structure needs to be divisible by 32
+ * on all architectures because low 5 bits of the addresses
+ * are used as follows:
+ *
+ * bit 0: to device, used to indicate "performant mode" command
+ * from device, indidcates error status.
+ * bit 1-3: to device, indicates block fetch table entry for
+ * reducing DMA in fetching commands from host memory.
+ * bit 4: used to indicate whether tag is "direct lookup" (index),
+ * or a bus address.
+ */
+
struct CommandList {
struct CommandListHeader Header;
struct RequestBlock Request;
@@ -291,6 +311,14 @@
struct completion *waiting;
int retry_count;
void *scsi_cmd;
+
+/* on 64 bit architectures, to get this to be 32-byte-aligned
+ * it so happens we need no padding, on 32 bit systems,
+ * we need 8 bytes of padding. This does that.
+ */
+#define COMMANDLIST_PAD ((8 - sizeof(long))/4 * 8)
+ u8 pad[COMMANDLIST_PAD];
+
};
/* Configuration Table Structure */
@@ -301,18 +329,38 @@
u32 CoalIntCount;
};
+#define SIMPLE_MODE 0x02
+#define PERFORMANT_MODE 0x04
+#define MEMQ_MODE 0x08
+
struct CfgTable {
- u8 Signature[4];
- u32 SpecValence;
- u32 TransportSupport;
- u32 TransportActive;
- struct HostWrite HostWrite;
- u32 CmdsOutMax;
- u32 BusTypes;
- u32 Reserved;
- u8 ServerName[16];
- u32 HeartBeat;
- u32 SCSI_Prefetch;
+ u8 Signature[4];
+ u32 SpecValence;
+ u32 TransportSupport;
+ u32 TransportActive;
+ struct HostWrite HostWrite;
+ u32 CmdsOutMax;
+ u32 BusTypes;
+ u32 TransMethodOffset;
+ u8 ServerName[16];
+ u32 HeartBeat;
+ u32 SCSI_Prefetch;
+ u32 MaxScatterGatherElements;
+ u32 MaxLogicalUnits;
+ u32 MaxPhysicalDevices;
+ u32 MaxPhysicalDrivesPerLogicalUnit;
+ u32 MaxPerformantModeCommands;
+};
+
+#define NUM_BLOCKFETCH_ENTRIES 8
+struct TransTable_struct {
+ u32 BlockFetch[NUM_BLOCKFETCH_ENTRIES];
+ u32 RepQSize;
+ u32 RepQCount;
+ u32 RepQCtrAddrLow32;
+ u32 RepQCtrAddrHigh32;
+ u32 RepQAddr0Low32;
+ u32 RepQAddr0High32;
};
struct hpsa_pci_info {
