PM: Rework handling of interrupts during suspend-resume
Use the functions introduced in by the previous patch,
suspend_device_irqs(), resume_device_irqs() and check_wakeup_irqs(),
to rework the handling of interrupts during suspend (hibernation) and
resume. Namely, interrupts will only be disabled on the CPU right
before suspending sysdevs, while device drivers will be prevented
from receiving interrupts, with the help of the new helper function,
before their "late" suspend callbacks run (and analogously during
resume).
In addition, since the device interrups are now disabled before the
CPU has turned all interrupts off and the CPU will ACK the interrupts
setting the IRQ_PENDING bit for them, check in sysdev_suspend() if
any wake-up interrupts are pending and abort suspend if that's the
case.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 4a4a206..320bb09 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -214,7 +214,7 @@
return error;
device_pm_lock();
- local_irq_disable();
+
/* At this point, device_suspend() has been called, but *not*
* device_power_down(). We *must* call device_power_down() now.
* Otherwise, drivers for some devices (e.g. interrupt controllers)
@@ -225,8 +225,11 @@
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting hibernation\n");
- goto Enable_irqs;
+ goto Unlock;
}
+
+ local_irq_disable();
+
sysdev_suspend(PMSG_FREEZE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
@@ -252,12 +255,16 @@
/* NOTE: device_power_up() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
+
Power_up_devices:
+ local_irq_enable();
+
device_power_up(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
- Enable_irqs:
- local_irq_enable();
+
+ Unlock:
device_pm_unlock();
+
return error;
}
@@ -336,13 +343,16 @@
int error;
device_pm_lock();
- local_irq_disable();
+
error = device_power_down(PMSG_QUIESCE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting resume\n");
- goto Enable_irqs;
+ goto Unlock;
}
+
+ local_irq_disable();
+
sysdev_suspend(PMSG_QUIESCE);
/* We'll ignore saved state, but this gets preempt count (etc) right */
save_processor_state();
@@ -366,11 +376,16 @@
swsusp_free();
restore_processor_state();
touch_softlockup_watchdog();
+
sysdev_resume();
- device_power_up(PMSG_RECOVER);
- Enable_irqs:
+
local_irq_enable();
+
+ device_power_up(PMSG_RECOVER);
+
+ Unlock:
device_pm_unlock();
+
return error;
}
@@ -447,15 +462,16 @@
goto Finish;
device_pm_lock();
- local_irq_disable();
+
error = device_power_down(PMSG_HIBERNATE);
if (!error) {
+ local_irq_disable();
sysdev_suspend(PMSG_HIBERNATE);
hibernation_ops->enter();
/* We should never get here */
while (1);
}
- local_irq_enable();
+
device_pm_unlock();
/*
@@ -464,12 +480,15 @@
*/
Finish:
hibernation_ops->finish();
+
Resume_devices:
entering_platform_hibernation = false;
device_resume(PMSG_RESTORE);
resume_console();
+
Close:
hibernation_ops->end();
+
return error;
}
