ide: rework the code for selecting the best DMA transfer mode (v3)
Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch.
* add ide_hwif_t.udma_filter hook for filtering UDMA mask
(use it in alim15x3, hpt366, siimage and serverworks drivers)
* add ide_max_dma_mode() for finding best DMA mode for the device
(loosely based on some older libata-core.c code)
* convert ide_dma_speed() users to use ide_max_dma_mode()
* make ide_rate_filter() take "ide_drive_t *drive" as an argument instead
of "u8 mode" and teach it to how to use UDMA mask to do filtering
* use ide_rate_filter() in hpt366 driver
* remove no longer needed ide_dma_speed() and *_ratemask()
* unexport eighty_ninty_three()
v2:
* rename ->filter_udma_mask to ->udma_filter
[ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
v3:
* updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space
originated transfer mode change requests when 100MHz clock is used)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index c0188de..5314ec9 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -122,45 +122,41 @@
}
/**
- * siimage_ratemask - Compute available modes
- * @drive: IDE drive
+ * sil_udma_filter - compute UDMA mask
+ * @drive: IDE device
*
- * Compute the available speeds for the devices on the interface.
+ * Compute the available UDMA speeds for the device on the interface.
+ *
* For the CMD680 this depends on the clocking mode (scsc), for the
- * SI3312 SATA controller life is a bit simpler. Enforce UDMA33
- * as a limit if there is no 80pin cable present.
+ * SI3112 SATA controller life is a bit simpler.
*/
-
-static byte siimage_ratemask (ide_drive_t *drive)
+
+static u8 sil_udma_filter(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 mode = 0, scsc = 0;
+ ide_hwif_t *hwif = drive->hwif;
unsigned long base = (unsigned long) hwif->hwif_data;
+ u8 mask = 0, scsc = 0;
if (hwif->mmio)
scsc = hwif->INB(base + 0x4A);
else
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
- if(is_sata(hwif))
- {
- if(strstr(drive->id->model, "Maxtor"))
- return 3;
- return 4;
+ if (is_sata(hwif)) {
+ mask = strstr(drive->id->model, "Maxtor") ? 0x3f : 0x7f;
+ goto out;
}
-
+
if ((scsc & 0x30) == 0x10) /* 133 */
- mode = 4;
+ mask = 0x7f;
else if ((scsc & 0x30) == 0x20) /* 2xPCI */
- mode = 4;
+ mask = 0x7f;
else if ((scsc & 0x30) == 0x00) /* 100 */
- mode = 3;
+ mask = 0x3f;
else /* Disabled ? */
BUG();
-
- if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
- return mode;
+out:
+ return mask;
}
/**
@@ -306,7 +302,7 @@
ide_hwif_t *hwif = HWIF(drive);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
- u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed);
+ u8 speed = ide_rate_filter(drive, xferspeed);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc = 0, addr_mask = ((hwif->channel) ?
((hwif->mmio) ? 0xF4 : 0x84) :
@@ -389,7 +385,7 @@
static int config_chipset_for_dma (ide_drive_t *drive)
{
- u8 speed = ide_dma_speed(drive, siimage_ratemask(drive));
+ u8 speed = ide_max_dma_mode(drive);
if (!speed)
return 0;
@@ -989,6 +985,7 @@
hwif->tuneproc = &siimage_tuneproc;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
+ hwif->udma_filter = &sil_udma_filter;
if(is_sata(hwif)) {
static int first = 1;
