[PATCH] dvb: b2c2/flexcop driver refactoring part 2: add modular Flexcop driver
b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add
modular Flexcop driver
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
new file mode 100644
index 0000000..736251f
--- /dev/null
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -0,0 +1,204 @@
+/*
+ * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ *
+ * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
+ *
+ * see flexcop.c for copyright information.
+ */
+#include "flexcop.h"
+
+#define FC_MAX_I2C_RETRIES 100000
+
+static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100, int max_ack_errors)
+{
+ int i,ack_errors = 0;
+ flexcop_ibi_value r;
+
+ r100->tw_sm_c_100.working_start = 1;
+ deb_i2c("r100 before: %08x\n",r100->raw);
+
+ fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
+ fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */
+
+ for (i = 0; i < FC_MAX_I2C_RETRIES; i++) {
+ r = fc->read_ibi_reg(fc, tw_sm_c_100);
+
+ if (!r.tw_sm_c_100.no_base_addr_ack_error) {
+ if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */
+ *r100 = r;
+ deb_i2c("i2c success\n");
+ return 0;
+ }
+ } else {
+ deb_i2c("suffering from an i2c ack_error\n");
+ if (++ack_errors >= max_ack_errors)
+ break;
+
+ fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero);
+ fc->write_ibi_reg(fc, tw_sm_c_100, *r100);
+ }
+ }
+ deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i);
+ return -EREMOTEIO;
+}
+
+static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+{
+ flexcop_ibi_value r104;
+ int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
+ ret;
+
+ if ((ret = flexcop_i2c_operation(fc,&r100,30)) != 0)
+ return ret;
+
+ r104 = fc->read_ibi_reg(fc,tw_sm_c_104);
+
+ deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+
+ /* there is at least one byte, otherwise we wouldn't be here */
+ buf[0] = r100.tw_sm_c_100.data1_reg;
+
+ if (len > 0) buf[1] = r104.tw_sm_c_104.data2_reg;
+ if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg;
+ if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg;
+
+ return 0;
+}
+
+static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf)
+{
+ flexcop_ibi_value r104;
+ int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */
+ r104.raw = 0;
+
+ /* there is at least one byte, otherwise we wouldn't be here */
+ r100.tw_sm_c_100.data1_reg = buf[0];
+
+ r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0;
+ r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0;
+ r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0;
+
+ deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw);
+
+ /* write the additional i2c data before doing the actual i2c operation */
+ fc->write_ibi_reg(fc,tw_sm_c_104,r104);
+
+ return flexcop_i2c_operation(fc,&r100,30);
+}
+
+/* master xfer callback for demodulator */
+static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+ struct flexcop_device *fc = i2c_get_adapdata(i2c_adap);
+ int i, ret = 0;
+
+ if (down_interruptible(&fc->i2c_sem))
+ return -ERESTARTSYS;
+
+ /* reading */
+ if (num == 2 &&
+ msgs[0].flags == 0 &&
+ msgs[1].flags == I2C_M_RD &&
+ msgs[0].buf != NULL &&
+ msgs[1].buf != NULL) {
+
+ ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len);
+
+ } else for (i = 0; i < num; i++) { /* writing command */
+ if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) {
+ ret = -EINVAL;
+ break;
+ }
+
+ ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1);
+ }
+
+ if (ret < 0)
+ err("i2c master_xfer failed");
+ else
+ ret = num;
+
+ up(&fc->i2c_sem);
+
+ return ret;
+}
+
+int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op,
+ flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+{
+ int ret;
+ u16 bytes_to_transfer;
+ flexcop_ibi_value r100;
+
+ deb_i2c("op = %d\n",op);
+ r100.raw = 0;
+ r100.tw_sm_c_100.chipaddr = chipaddr;
+ r100.tw_sm_c_100.twoWS_rw = op;
+ r100.tw_sm_c_100.twoWS_port_reg = port;
+
+ while (len != 0) {
+ bytes_to_transfer = len > 4 ? 4 : len;
+
+ r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1;
+ r100.tw_sm_c_100.baseaddr = addr;
+
+ if (op == FC_READ)
+ ret = flexcop_i2c_read4(fc, r100, buf);
+ else
+ ret = flexcop_i2c_write4(fc,r100, buf);
+
+ if (ret < 0)
+ return ret;
+
+ buf += bytes_to_transfer;
+ addr += bytes_to_transfer;
+ len -= bytes_to_transfer;
+ };
+
+ return 0;
+}
+/* exported for PCI i2c */
+EXPORT_SYMBOL(flexcop_i2c_request);
+
+static u32 flexcop_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm flexcop_algo = {
+ .name = "FlexCop I2C algorithm",
+ .id = I2C_ALGO_BIT,
+ .master_xfer = flexcop_master_xfer,
+ .functionality = flexcop_i2c_func,
+};
+
+int flexcop_i2c_init(struct flexcop_device *fc)
+{
+ int ret;
+
+ sema_init(&fc->i2c_sem,1);
+
+ memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter));
+ strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",I2C_NAME_SIZE);
+
+ i2c_set_adapdata(&fc->i2c_adap,fc);
+
+ fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL;
+ fc->i2c_adap.algo = &flexcop_algo;
+ fc->i2c_adap.algo_data = NULL;
+ fc->i2c_adap.id = I2C_ALGO_BIT;
+
+ if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0)
+ return ret;
+
+ fc->init_state |= FC_STATE_I2C_INIT;
+ return 0;
+}
+
+void flexcop_i2c_exit(struct flexcop_device *fc)
+{
+ if (fc->init_state & FC_STATE_I2C_INIT)
+ i2c_del_adapter(&fc->i2c_adap);
+
+ fc->init_state &= ~FC_STATE_I2C_INIT;
+}
