V4L/DVB (13088): cx25840: Convert chip/core family checks to static inline functions
Change logic to check for various chip or core families to inline functions.
Checks for specific chips should be made against the state->id field now. This
is in preparation for chip/core specific code for setting up PLLs for the
CX2388[578] family of cores, that all run with different crystal frequencies.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index e836567..a6446e6 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -494,7 +494,7 @@
}
/* DEBUG: Displays configured PLL frequency */
- if (!state->is_cx231xx) {
+ if (!is_cx231xx(state)) {
pll_int = cx25840_read(client, 0x108);
pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff;
pll_post = cx25840_read(client, 0x109);
@@ -678,7 +678,7 @@
* configuration in reg (for the cx23885) so we have no
* need to attempt to flip bits for earlier av decoders.
*/
- if (!state->is_cx23885 && !state->is_cx231xx) {
+ if (!is_cx2388x(state) && !is_cx231xx(state)) {
switch (aud_input) {
case CX25840_AUDIO_SERIAL:
/* do nothing, use serial audio input */
@@ -701,7 +701,7 @@
/* Set INPUT_MODE to Composite (0) or S-Video (1) */
cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02);
- if (!state->is_cx23885 && !state->is_cx231xx) {
+ if (!is_cx2388x(state) && !is_cx231xx(state)) {
/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */
@@ -720,12 +720,12 @@
state->vid_input = vid_input;
state->aud_input = aud_input;
- if (!state->is_cx25836) {
+ if (!is_cx2583x(state)) {
cx25840_audio_set_path(client);
input_change(client);
}
- if (state->is_cx23885) {
+ if (is_cx2388x(state)) {
/* Audio channel 1 src : Parallel 1 */
cx25840_write(client, 0x124, 0x03);
@@ -741,7 +741,7 @@
*/
cx25840_write(client, 0x918, 0xa0);
cx25840_write(client, 0x919, 0x01);
- } else if (state->is_cx231xx) {
+ } else if (is_cx231xx(state)) {
/* Audio channel 1 src : Parallel 1 */
cx25840_write(client, 0x124, 0x03);
@@ -805,7 +805,7 @@
cx25840_and_or(client, 0x400, ~0xf, fmt);
cx25840_and_or(client, 0x403, ~0x3, pal_m);
cx25840_std_setup(client);
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
input_change(client);
return 0;
}
@@ -868,7 +868,7 @@
case V4L2_CID_AUDIO_TREBLE:
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_MUTE:
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
return cx25840_audio_s_ctrl(sd, ctrl);
@@ -905,7 +905,7 @@
case V4L2_CID_AUDIO_TREBLE:
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_MUTE:
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
return cx25840_audio_g_ctrl(sd, ctrl);
default:
@@ -1209,11 +1209,11 @@
if (!state->is_initialized) {
/* initialize and load firmware */
state->is_initialized = 1;
- if (state->is_cx25836)
+ if (is_cx2583x(state))
cx25836_initialize(client);
- else if (state->is_cx23885)
+ else if (is_cx2388x(state))
cx23885_initialize(client);
- else if (state->is_cx231xx)
+ else if (is_cx231xx(state))
cx231xx_initialize(client);
else
cx25840_initialize(client);
@@ -1256,17 +1256,17 @@
v4l_dbg(1, cx25840_debug, client, "%s output\n",
enable ? "enable" : "disable");
if (enable) {
- if (state->is_cx23885 || state->is_cx231xx) {
+ if (is_cx2388x(state) || is_cx231xx(state)) {
u8 v = (cx25840_read(client, 0x421) | 0x0b);
cx25840_write(client, 0x421, v);
} else {
cx25840_write(client, 0x115,
- state->is_cx25836 ? 0x0c : 0x8c);
+ is_cx2583x(state) ? 0x0c : 0x8c);
cx25840_write(client, 0x116,
- state->is_cx25836 ? 0x04 : 0x07);
+ is_cx2583x(state) ? 0x04 : 0x07);
}
} else {
- if (state->is_cx23885 || state->is_cx231xx) {
+ if (is_cx2388x(state) || is_cx231xx(state)) {
u8 v = cx25840_read(client, 0x421) & ~(0x0b);
cx25840_write(client, 0x421, v);
} else {
@@ -1292,7 +1292,7 @@
default:
break;
}
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
switch (qc->id) {
@@ -1346,7 +1346,7 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
return set_input(client, state->vid_input, input);
}
@@ -1356,7 +1356,7 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
input_change(client);
return 0;
}
@@ -1373,7 +1373,7 @@
return 0;
vt->signal = vpres ? 0xffff : 0x0;
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return 0;
vt->capability |=
@@ -1404,7 +1404,7 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (state->radio || state->is_cx25836)
+ if (state->radio || is_cx2583x(state))
return 0;
switch (vt->audmode) {
@@ -1445,11 +1445,11 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (state->is_cx25836)
+ if (is_cx2583x(state))
cx25836_initialize(client);
- else if (state->is_cx23885)
+ else if (is_cx2388x(state))
cx23885_initialize(client);
- else if (state->is_cx231xx)
+ else if (is_cx231xx(state))
cx231xx_initialize(client);
else
cx25840_initialize(client);
@@ -1470,7 +1470,7 @@
struct i2c_client *client = v4l2_get_subdevdata(sd);
log_video_status(client);
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
log_audio_status(client);
return 0;
}
@@ -1594,22 +1594,18 @@
v4l2_i2c_subdev_init(sd, client, &cx25840_ops);
switch (id) {
case V4L2_IDENT_CX23885_AV:
- state->is_cx23885 = 1;
v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
break;
case V4L2_IDENT_CX23887_AV:
- state->is_cx23885 = 1;
v4l_info(client, "cx23887 A/V decoder found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
break;
case V4L2_IDENT_CX23888_AV:
- state->is_cx23885 = 1;
v4l_info(client, "cx23888 A/V decoder found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
break;
case V4L2_IDENT_CX2310X_AV:
- state->is_cx231xx = 1;
v4l_info(client, "cx%d A/V decoder found @ 0x%x (%s)\n",
device_id, client->addr << 1, client->adapter->name);
break;
@@ -1627,7 +1623,6 @@
break;
case V4L2_IDENT_CX25836:
case V4L2_IDENT_CX25837:
- state->is_cx25836 = 1;
default:
v4l_info(client, "cx25%3x-%x found @ 0x%x (%s)\n",
(device_id & 0xfff0) >> 4, device_id & 0x0f,
